summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard/twl4030_keypad.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/keyboard/twl4030_keypad.c')
-rw-r--r--drivers/input/keyboard/twl4030_keypad.c28
1 files changed, 16 insertions, 12 deletions
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index bbcccd672..323a0fb57 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -61,9 +61,9 @@ struct twl4030_keypad {
unsigned short keymap[TWL4030_KEYMAP_SIZE];
u16 kp_state[TWL4030_MAX_ROWS];
bool autorepeat;
- unsigned n_rows;
- unsigned n_cols;
- unsigned irq;
+ unsigned int n_rows;
+ unsigned int n_cols;
+ unsigned int irq;
struct device *dbg_dev;
struct input_dev *input;
@@ -110,7 +110,7 @@ struct twl4030_keypad {
#define KEYP_CTRL_KBD_ON BIT(6)
/* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/
-#define KEYP_PERIOD_US(t, prescale) ((t) / (31 << (prescale + 1)) - 1)
+#define KEYP_PERIOD_US(t, prescale) ((t) / (31 << ((prescale) + 1)) - 1)
/* KEYP_LK_PTV_REG Fields */
#define KEYP_LK_PTV_PTV_SHIFT 5
@@ -162,9 +162,10 @@ static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg)
static inline u16 twl4030_col_xlate(struct twl4030_keypad *kp, u8 col)
{
- /* If all bits in a row are active for all coloumns then
+ /*
+ * If all bits in a row are active for all columns then
* we have that row line connected to gnd. Mark this
- * key on as if it was on matrix position n_cols (ie
+ * key on as if it was on matrix position n_cols (i.e.
* one higher than the size of the matrix).
*/
if (col == 0xFF)
@@ -209,9 +210,9 @@ static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
u16 new_state[TWL4030_MAX_ROWS];
int col, row;
- if (release_all)
+ if (release_all) {
memset(new_state, 0, sizeof(new_state));
- else {
+ } else {
/* check for any changes */
int ret = twl4030_read_kp_matrix_state(kp, new_state);
@@ -262,8 +263,10 @@ static irqreturn_t do_kp_irq(int irq, void *_kp)
/* Read & Clear TWL4030 pending interrupt */
ret = twl4030_kpread(kp, &reg, KEYP_ISR1, 1);
- /* Release all keys if I2C has gone bad or
- * the KEYP has gone to idle state */
+ /*
+ * Release all keys if I2C has gone bad or
+ * the KEYP has gone to idle state.
+ */
if (ret >= 0 && (reg & KEYP_IMR1_KP))
twl4030_kp_scan(kp, false);
else
@@ -283,7 +286,8 @@ static int twl4030_kp_program(struct twl4030_keypad *kp)
if (twl4030_kpwrite_u8(kp, reg, KEYP_CTRL) < 0)
return -EIO;
- /* NOTE: we could use sih_setup() here to package keypad
+ /*
+ * NOTE: we could use sih_setup() here to package keypad
* event sources as four different IRQs ... but we don't.
*/
@@ -312,7 +316,7 @@ static int twl4030_kp_program(struct twl4030_keypad *kp)
/*
* Enable Clear-on-Read; disable remembering events that fire
- * after the IRQ but before our handler acks (reads) them,
+ * after the IRQ but before our handler acks (reads) them.
*/
reg = TWL4030_SIH_CTRL_COR_MASK | TWL4030_SIH_CTRL_PENDDIS_MASK;
if (twl4030_kpwrite_u8(kp, reg, KEYP_SIH_CTRL) < 0)