diff options
Diffstat (limited to 'drivers/input/mouse/alps.h')
| -rw-r--r-- | drivers/input/mouse/alps.h | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h new file mode 100644 index 000000000..6dfdccc3a --- /dev/null +++ b/drivers/input/mouse/alps.h @@ -0,0 +1,303 @@ +/* + * ALPS touchpad PS/2 mouse driver + * + * Copyright (c) 2003 Peter Osterlund <petero2@telia.com> + * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _ALPS_H +#define _ALPS_H + +#include <linux/input/mt.h> + +#define ALPS_PROTO_V1 0x100 +#define ALPS_PROTO_V2 0x200 +#define ALPS_PROTO_V3 0x300 +#define ALPS_PROTO_V3_RUSHMORE 0x310 +#define ALPS_PROTO_V4 0x400 +#define ALPS_PROTO_V5 0x500 +#define ALPS_PROTO_V6 0x600 +#define ALPS_PROTO_V7 0x700 /* t3btl t4s */ +#define ALPS_PROTO_V8 0x800 /* SS4btl SS4s */ + +#define MAX_TOUCHES 4 + +#define DOLPHIN_COUNT_PER_ELECTRODE 64 +#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ +#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ + +/* + * enum SS4_PACKET_ID - defines the packet type for V8 + * SS4_PACKET_ID_IDLE: There's no finger and no button activity. + * SS4_PACKET_ID_ONE: There's one finger on touchpad + * or there's button activities. + * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad + * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad +*/ +enum SS4_PACKET_ID { + SS4_PACKET_ID_IDLE = 0, + SS4_PACKET_ID_ONE, + SS4_PACKET_ID_TWO, + SS4_PACKET_ID_MULTI, +}; + +#define SS4_COUNT_PER_ELECTRODE 256 +#define SS4_NUMSENSOR_XOFFSET 7 +#define SS4_NUMSENSOR_YOFFSET 7 +#define SS4_MIN_PITCH_MM 50 + +#define SS4_MASK_NORMAL_BUTTONS 0x07 + +#define SS4_1F_X_V2(_b) ((_b[0] & 0x0007) | \ + ((_b[1] << 3) & 0x0078) | \ + ((_b[1] << 2) & 0x0380) | \ + ((_b[2] << 5) & 0x1C00) \ + ) + +#define SS4_1F_Y_V2(_b) (((_b[2]) & 0x000F) | \ + ((_b[3] >> 2) & 0x0030) | \ + ((_b[4] << 6) & 0x03C0) | \ + ((_b[4] << 5) & 0x0C00) \ + ) + +#define SS4_1F_Z_V2(_b) (((_b[5]) & 0x0F) | \ + ((_b[5] >> 1) & 0x70) | \ + ((_b[4]) & 0x80) \ + ) + +#define SS4_1F_LFB_V2(_b) (((_b[2] >> 4) & 0x01) == 0x01) + +#define SS4_MF_LF_V2(_b, _i) ((_b[1 + (_i) * 3] & 0x0004) == 0x0004) + +#define SS4_BTN_V2(_b) ((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS) + +#define SS4_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 5) & 0x00E0) | \ + ((_b[1 + _i * 3] << 5) & 0x1F00) \ + ) + +#define SS4_STD_MF_Y_V2(_b, _i) (((_b[1 + (_i) * 3] << 3) & 0x0010) | \ + ((_b[2 + (_i) * 3] << 5) & 0x01E0) | \ + ((_b[2 + (_i) * 3] << 4) & 0x0E00) \ + ) + +#define SS4_BTL_MF_X_V2(_b, _i) (SS4_STD_MF_X_V2(_b, _i) | \ + ((_b[0 + (_i) * 3] >> 3) & 0x0010) \ + ) + +#define SS4_BTL_MF_Y_V2(_b, _i) (SS4_STD_MF_Y_V2(_b, _i) | \ + ((_b[0 + (_i) * 3] >> 3) & 0x0008) \ + ) + +#define SS4_MF_Z_V2(_b, _i) (((_b[1 + (_i) * 3]) & 0x0001) | \ + ((_b[1 + (_i) * 3] >> 1) & 0x0002) \ + ) + +#define SS4_IS_MF_CONTINUE(_b) ((_b[2] & 0x10) == 0x10) +#define SS4_IS_5F_DETECTED(_b) ((_b[2] & 0x10) == 0x10) + + +#define SS4_MFPACKET_NO_AX 8160 /* X-Coordinate value */ +#define SS4_MFPACKET_NO_AY 4080 /* Y-Coordinate value */ +#define SS4_MFPACKET_NO_AX_BL 8176 /* Buttonless X-Coordinate value */ +#define SS4_MFPACKET_NO_AY_BL 4088 /* Buttonless Y-Coordinate value */ + +/* + * enum V7_PACKET_ID - defines the packet type for V7 + * V7_PACKET_ID_IDLE: There's no finger and no button activity. + * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad + * or there's button activities. + * V7_PACKET_ID_MULTI: There are at least three non-resting fingers. + * V7_PACKET_ID_NEW: The finger position in slot is not continues from + * previous packet. +*/ +enum V7_PACKET_ID { + V7_PACKET_ID_IDLE, + V7_PACKET_ID_TWO, + V7_PACKET_ID_MULTI, + V7_PACKET_ID_NEW, + V7_PACKET_ID_UNKNOWN, +}; + +/** + * struct alps_protocol_info - information about protocol used by a device + * @version: Indicates V1/V2/V3/... + * @byte0: Helps figure out whether a position report packet matches the + * known format for this model. The first byte of the report, ANDed with + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). + */ +struct alps_protocol_info { + u16 version; + u8 byte0, mask0; + unsigned int flags; +}; + +/** + * struct alps_model_info - touchpad ID table + * @signature: E7 response string to match. + * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response + * (aka command mode response) identifies the firmware minor version. This + * can be used to distinguish different hardware models which are not + * uniquely identifiable through their E7 responses. + * @protocol_info: information about protcol used by the device. + * + * Many (but not all) ALPS touchpads can be identified by looking at the + * values returned in the "E7 report" and/or the "EC report." This table + * lists a number of such touchpads. + */ +struct alps_model_info { + u8 signature[3]; + u8 command_mode_resp; + struct alps_protocol_info protocol_info; +}; + +/** + * struct alps_nibble_commands - encodings for register accesses + * @command: PS/2 command used for the nibble + * @data: Data supplied as an argument to the PS/2 command, if applicable + * + * The ALPS protocol uses magic sequences to transmit binary data to the + * touchpad, as it is generally not OK to send arbitrary bytes out the + * PS/2 port. Each of the sequences in this table sends one nibble of the + * register address or (write) data. Different versions of the ALPS protocol + * use slightly different encodings. + */ +struct alps_nibble_commands { + int command; + unsigned char data; +}; + +struct alps_bitmap_point { + int start_bit; + int num_bits; +}; + +/** + * struct alps_fields - decoded version of the report packet + * @x_map: Bitmap of active X positions for MT. + * @y_map: Bitmap of active Y positions for MT. + * @fingers: Number of fingers for MT. + * @pressure: Pressure. + * @st: position for ST. + * @mt: position for MT. + * @first_mp: Packet is the first of a multi-packet report. + * @is_mp: Packet is part of a multi-packet report. + * @left: Left touchpad button is active. + * @right: Right touchpad button is active. + * @middle: Middle touchpad button is active. + * @ts_left: Left trackstick button is active. + * @ts_right: Right trackstick button is active. + * @ts_middle: Middle trackstick button is active. + */ +struct alps_fields { + unsigned int x_map; + unsigned int y_map; + unsigned int fingers; + + int pressure; + struct input_mt_pos st; + struct input_mt_pos mt[MAX_TOUCHES]; + + unsigned int first_mp:1; + unsigned int is_mp:1; + + unsigned int left:1; + unsigned int right:1; + unsigned int middle:1; + + unsigned int ts_left:1; + unsigned int ts_right:1; + unsigned int ts_middle:1; +}; + +/** + * struct alps_data - private data structure for the ALPS driver + * @psmouse: Pointer to parent psmouse device + * @dev2: Trackstick device (can be NULL). + * @dev3: Generic PS/2 mouse (can be NULL, delayed registering). + * @phys2: Physical path for the trackstick device. + * @phys3: Physical path for the generic PS/2 mouse. + * @dev3_register_work: Delayed work for registering PS/2 mouse. + * @nibble_commands: Command mapping used for touchpad register accesses. + * @addr_command: Command used to tell the touchpad that a register address + * follows. + * @proto_version: Indicates V1/V2/V3/... + * @byte0: Helps figure out whether a position report packet matches the + * known format for this model. The first byte of the report, ANDed with + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @fw_ver: cached copy of firmware version (EC report) + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). + * @x_max: Largest possible X position value. + * @y_max: Largest possible Y position value. + * @x_bits: Number of X bits in the MT bitmap. + * @y_bits: Number of Y bits in the MT bitmap. + * @hw_init: Protocol-specific hardware init function. + * @process_packet: Protocol-specific function to process a report packet. + * @decode_fields: Protocol-specific function to read packet bitfields. + * @set_abs_params: Protocol-specific function to configure the input_dev. + * @prev_fin: Finger bit from previous packet. + * @multi_packet: Multi-packet data in progress. + * @multi_data: Saved multi-packet data. + * @f: Decoded packet data fields. + * @quirks: Bitmap of ALPS_QUIRK_*. + * @timer: Timer for flushing out the final report packet in the stream. + */ +struct alps_data { + struct psmouse *psmouse; + struct input_dev *dev2; + struct input_dev *dev3; + char phys2[32]; + char phys3[32]; + struct delayed_work dev3_register_work; + + /* these are autodetected when the device is identified */ + const struct alps_nibble_commands *nibble_commands; + int addr_command; + u16 proto_version; + u8 byte0, mask0; + u8 fw_ver[3]; + int flags; + int x_max; + int y_max; + int x_bits; + int y_bits; + unsigned int x_res; + unsigned int y_res; + + int (*hw_init)(struct psmouse *psmouse); + void (*process_packet)(struct psmouse *psmouse); + int (*decode_fields)(struct alps_fields *f, unsigned char *p, + struct psmouse *psmouse); + void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); + + int prev_fin; + int multi_packet; + unsigned char multi_data[6]; + struct alps_fields f; + u8 quirks; + struct timer_list timer; +}; + +#define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */ + +#ifdef CONFIG_MOUSE_PS2_ALPS +int alps_detect(struct psmouse *psmouse, bool set_properties); +int alps_init(struct psmouse *psmouse); +#else +inline int alps_detect(struct psmouse *psmouse, bool set_properties) +{ + return -ENOSYS; +} +inline int alps_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif /* CONFIG_MOUSE_PS2_ALPS */ + +#endif |