diff options
Diffstat (limited to 'drivers/input/rmi4/rmi_driver.c')
| -rw-r--r-- | drivers/input/rmi4/rmi_driver.c | 1054 |
1 files changed, 1054 insertions, 0 deletions
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c new file mode 100644 index 000000000..faa295ec4 --- /dev/null +++ b/drivers/input/rmi4/rmi_driver.c @@ -0,0 +1,1054 @@ +/* + * Copyright (c) 2011-2016 Synaptics Incorporated + * Copyright (c) 2011 Unixphere + * + * This driver provides the core support for a single RMI4-based device. + * + * The RMI4 specification can be found here (URL split for line length): + * + * http://www.synaptics.com/sites/default/files/ + * 511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/bitmap.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/kconfig.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <uapi/linux/input.h> +#include <linux/rmi.h> +#include "rmi_bus.h" +#include "rmi_driver.h" + +#define HAS_NONSTANDARD_PDT_MASK 0x40 +#define RMI4_MAX_PAGE 0xff +#define RMI4_PAGE_SIZE 0x100 +#define RMI4_PAGE_MASK 0xFF00 + +#define RMI_DEVICE_RESET_CMD 0x01 +#define DEFAULT_RESET_DELAY_MS 100 + +static void rmi_free_function_list(struct rmi_device *rmi_dev) +{ + struct rmi_function *fn, *tmp; + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + + data->f01_container = NULL; + + /* Doing it in the reverse order so F01 will be removed last */ + list_for_each_entry_safe_reverse(fn, tmp, + &data->function_list, node) { + list_del(&fn->node); + rmi_unregister_function(fn); + } +} + +static int reset_one_function(struct rmi_function *fn) +{ + struct rmi_function_handler *fh; + int retval = 0; + + if (!fn || !fn->dev.driver) + return 0; + + fh = to_rmi_function_handler(fn->dev.driver); + if (fh->reset) { + retval = fh->reset(fn); + if (retval < 0) + dev_err(&fn->dev, "Reset failed with code %d.\n", + retval); + } + + return retval; +} + +static int configure_one_function(struct rmi_function *fn) +{ + struct rmi_function_handler *fh; + int retval = 0; + + if (!fn || !fn->dev.driver) + return 0; + + fh = to_rmi_function_handler(fn->dev.driver); + if (fh->config) { + retval = fh->config(fn); + if (retval < 0) + dev_err(&fn->dev, "Config failed with code %d.\n", + retval); + } + + return retval; +} + +static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct rmi_function *entry; + int retval; + + list_for_each_entry(entry, &data->function_list, node) { + retval = reset_one_function(entry); + if (retval < 0) + return retval; + } + + return 0; +} + +static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct rmi_function *entry; + int retval; + + list_for_each_entry(entry, &data->function_list, node) { + retval = configure_one_function(entry); + if (retval < 0) + return retval; + } + + return 0; +} + +static void process_one_interrupt(struct rmi_driver_data *data, + struct rmi_function *fn) +{ + struct rmi_function_handler *fh; + + if (!fn || !fn->dev.driver) + return; + + fh = to_rmi_function_handler(fn->dev.driver); + if (fh->attention) { + bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask, + data->irq_count); + if (!bitmap_empty(data->fn_irq_bits, data->irq_count)) + fh->attention(fn, data->fn_irq_bits); + } +} + +int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct device *dev = &rmi_dev->dev; + struct rmi_function *entry; + int error; + + if (!data) + return 0; + + if (!rmi_dev->xport->attn_data) { + error = rmi_read_block(rmi_dev, + data->f01_container->fd.data_base_addr + 1, + data->irq_status, data->num_of_irq_regs); + if (error < 0) { + dev_err(dev, "Failed to read irqs, code=%d\n", error); + return error; + } + } + + mutex_lock(&data->irq_mutex); + bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask, + data->irq_count); + /* + * At this point, irq_status has all bits that are set in the + * interrupt status register and are enabled. + */ + mutex_unlock(&data->irq_mutex); + + /* + * It would be nice to be able to use irq_chip to handle these + * nested IRQs. Unfortunately, most of the current customers for + * this driver are using older kernels (3.0.x) that don't support + * the features required for that. Once they've shifted to more + * recent kernels (say, 3.3 and higher), this should be switched to + * use irq_chip. + */ + list_for_each_entry(entry, &data->function_list, node) + process_one_interrupt(data, entry); + + if (data->input) + input_sync(data->input); + + return 0; +} +EXPORT_SYMBOL_GPL(rmi_process_interrupt_requests); + +static int suspend_one_function(struct rmi_function *fn) +{ + struct rmi_function_handler *fh; + int retval = 0; + + if (!fn || !fn->dev.driver) + return 0; + + fh = to_rmi_function_handler(fn->dev.driver); + if (fh->suspend) { + retval = fh->suspend(fn); + if (retval < 0) + dev_err(&fn->dev, "Suspend failed with code %d.\n", + retval); + } + + return retval; +} + +static int rmi_suspend_functions(struct rmi_device *rmi_dev) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct rmi_function *entry; + int retval; + + list_for_each_entry(entry, &data->function_list, node) { + retval = suspend_one_function(entry); + if (retval < 0) + return retval; + } + + return 0; +} + +static int resume_one_function(struct rmi_function *fn) +{ + struct rmi_function_handler *fh; + int retval = 0; + + if (!fn || !fn->dev.driver) + return 0; + + fh = to_rmi_function_handler(fn->dev.driver); + if (fh->resume) { + retval = fh->resume(fn); + if (retval < 0) + dev_err(&fn->dev, "Resume failed with code %d.\n", + retval); + } + + return retval; +} + +static int rmi_resume_functions(struct rmi_device *rmi_dev) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct rmi_function *entry; + int retval; + + list_for_each_entry(entry, &data->function_list, node) { + retval = resume_one_function(entry); + if (retval < 0) + return retval; + } + + return 0; +} + +static int enable_sensor(struct rmi_device *rmi_dev) +{ + int retval = 0; + + retval = rmi_driver_process_config_requests(rmi_dev); + if (retval < 0) + return retval; + + return rmi_process_interrupt_requests(rmi_dev); +} + +/** + * rmi_driver_set_input_params - set input device id and other data. + * + * @rmi_dev: Pointer to an RMI device + * @input: Pointer to input device + * + */ +static int rmi_driver_set_input_params(struct rmi_device *rmi_dev, + struct input_dev *input) +{ + input->name = SYNAPTICS_INPUT_DEVICE_NAME; + input->id.vendor = SYNAPTICS_VENDOR_ID; + input->id.bustype = BUS_RMI; + return 0; +} + +static void rmi_driver_set_input_name(struct rmi_device *rmi_dev, + struct input_dev *input) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + char *device_name = rmi_f01_get_product_ID(data->f01_container); + char *name; + + name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL, + "Synaptics %s", device_name); + if (!name) + return; + + input->name = name; +} + +static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev, + unsigned long *mask) +{ + int error = 0; + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct device *dev = &rmi_dev->dev; + + mutex_lock(&data->irq_mutex); + bitmap_or(data->new_irq_mask, + data->current_irq_mask, mask, data->irq_count); + + error = rmi_write_block(rmi_dev, + data->f01_container->fd.control_base_addr + 1, + data->new_irq_mask, data->num_of_irq_regs); + if (error < 0) { + dev_err(dev, "%s: Failed to change enabled interrupts!", + __func__); + goto error_unlock; + } + bitmap_copy(data->current_irq_mask, data->new_irq_mask, + data->num_of_irq_regs); + +error_unlock: + mutex_unlock(&data->irq_mutex); + return error; +} + +static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev, + unsigned long *mask) +{ + int error = 0; + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct device *dev = &rmi_dev->dev; + + mutex_lock(&data->irq_mutex); + bitmap_andnot(data->new_irq_mask, + data->current_irq_mask, mask, data->irq_count); + + error = rmi_write_block(rmi_dev, + data->f01_container->fd.control_base_addr + 1, + data->new_irq_mask, data->num_of_irq_regs); + if (error < 0) { + dev_err(dev, "%s: Failed to change enabled interrupts!", + __func__); + goto error_unlock; + } + bitmap_copy(data->current_irq_mask, data->new_irq_mask, + data->num_of_irq_regs); + +error_unlock: + mutex_unlock(&data->irq_mutex); + return error; +} + +static int rmi_driver_reset_handler(struct rmi_device *rmi_dev) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + int error; + + /* + * Can get called before the driver is fully ready to deal with + * this situation. + */ + if (!data || !data->f01_container) { + dev_warn(&rmi_dev->dev, + "Not ready to handle reset yet!\n"); + return 0; + } + + error = rmi_read_block(rmi_dev, + data->f01_container->fd.control_base_addr + 1, + data->current_irq_mask, data->num_of_irq_regs); + if (error < 0) { + dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n", + __func__); + return error; + } + + error = rmi_driver_process_reset_requests(rmi_dev); + if (error < 0) + return error; + + error = rmi_driver_process_config_requests(rmi_dev); + if (error < 0) + return error; + + return 0; +} + +int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry, + u16 pdt_address) +{ + u8 buf[RMI_PDT_ENTRY_SIZE]; + int error; + + error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE); + if (error) { + dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n", + pdt_address, error); + return error; + } + + entry->page_start = pdt_address & RMI4_PAGE_MASK; + entry->query_base_addr = buf[0]; + entry->command_base_addr = buf[1]; + entry->control_base_addr = buf[2]; + entry->data_base_addr = buf[3]; + entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK; + entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5; + entry->function_number = buf[5]; + + return 0; +} +EXPORT_SYMBOL_GPL(rmi_read_pdt_entry); + +static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt, + struct rmi_function_descriptor *fd) +{ + fd->query_base_addr = pdt->query_base_addr + pdt->page_start; + fd->command_base_addr = pdt->command_base_addr + pdt->page_start; + fd->control_base_addr = pdt->control_base_addr + pdt->page_start; + fd->data_base_addr = pdt->data_base_addr + pdt->page_start; + fd->function_number = pdt->function_number; + fd->interrupt_source_count = pdt->interrupt_source_count; + fd->function_version = pdt->function_version; +} + +#define RMI_SCAN_CONTINUE 0 +#define RMI_SCAN_DONE 1 + +static int rmi_scan_pdt_page(struct rmi_device *rmi_dev, + int page, + void *ctx, + int (*callback)(struct rmi_device *rmi_dev, + void *ctx, + const struct pdt_entry *entry)) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + struct pdt_entry pdt_entry; + u16 page_start = RMI4_PAGE_SIZE * page; + u16 pdt_start = page_start + PDT_START_SCAN_LOCATION; + u16 pdt_end = page_start + PDT_END_SCAN_LOCATION; + u16 addr; + int error; + int retval; + + for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) { + error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr); + if (error) + return error; + + if (RMI4_END_OF_PDT(pdt_entry.function_number)) + break; + + retval = callback(rmi_dev, ctx, &pdt_entry); + if (retval != RMI_SCAN_CONTINUE) + return retval; + } + + return (data->f01_bootloader_mode || addr == pdt_start) ? + RMI_SCAN_DONE : RMI_SCAN_CONTINUE; +} + +static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx, + int (*callback)(struct rmi_device *rmi_dev, + void *ctx, + const struct pdt_entry *entry)) +{ + int page; + int retval = RMI_SCAN_DONE; + + for (page = 0; page <= RMI4_MAX_PAGE; page++) { + retval = rmi_scan_pdt_page(rmi_dev, page, ctx, callback); + if (retval != RMI_SCAN_CONTINUE) + break; + } + + return retval < 0 ? retval : 0; +} + +int rmi_read_register_desc(struct rmi_device *d, u16 addr, + struct rmi_register_descriptor *rdesc) +{ + int ret; + u8 size_presence_reg; + u8 buf[35]; + int presense_offset = 1; + u8 *struct_buf; + int reg; + int offset = 0; + int map_offset = 0; + int i; + int b; + + /* + * The first register of the register descriptor is the size of + * the register descriptor's presense register. + */ + ret = rmi_read(d, addr, &size_presence_reg); + if (ret) + return ret; + ++addr; + + if (size_presence_reg < 0 || size_presence_reg > 35) + return -EIO; + + memset(buf, 0, sizeof(buf)); + + /* + * The presence register contains the size of the register structure + * and a bitmap which identified which packet registers are present + * for this particular register type (ie query, control, or data). + */ + ret = rmi_read_block(d, addr, buf, size_presence_reg); + if (ret) + return ret; + ++addr; + + if (buf[0] == 0) { + presense_offset = 3; + rdesc->struct_size = buf[1] | (buf[2] << 8); + } else { + rdesc->struct_size = buf[0]; + } + + for (i = presense_offset; i < size_presence_reg; i++) { + for (b = 0; b < 8; b++) { + if (buf[i] & (0x1 << b)) + bitmap_set(rdesc->presense_map, map_offset, 1); + ++map_offset; + } + } + + rdesc->num_registers = bitmap_weight(rdesc->presense_map, + RMI_REG_DESC_PRESENSE_BITS); + + rdesc->registers = devm_kzalloc(&d->dev, rdesc->num_registers * + sizeof(struct rmi_register_desc_item), + GFP_KERNEL); + if (!rdesc->registers) + return -ENOMEM; + + /* + * Allocate a temporary buffer to hold the register structure. + * I'm not using devm_kzalloc here since it will not be retained + * after exiting this function + */ + struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL); + if (!struct_buf) + return -ENOMEM; + + /* + * The register structure contains information about every packet + * register of this type. This includes the size of the packet + * register and a bitmap of all subpackets contained in the packet + * register. + */ + ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size); + if (ret) + goto free_struct_buff; + + reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS); + map_offset = 0; + for (i = 0; i < rdesc->num_registers; i++) { + struct rmi_register_desc_item *item = &rdesc->registers[i]; + int reg_size = struct_buf[offset]; + + ++offset; + if (reg_size == 0) { + reg_size = struct_buf[offset] | + (struct_buf[offset + 1] << 8); + offset += 2; + } + + if (reg_size == 0) { + reg_size = struct_buf[offset] | + (struct_buf[offset + 1] << 8) | + (struct_buf[offset + 2] << 16) | + (struct_buf[offset + 3] << 24); + offset += 4; + } + + item->reg = reg; + item->reg_size = reg_size; + + do { + for (b = 0; b < 7; b++) { + if (struct_buf[offset] & (0x1 << b)) + bitmap_set(item->subpacket_map, + map_offset, 1); + ++map_offset; + } + } while (struct_buf[offset++] & 0x80); + + item->num_subpackets = bitmap_weight(item->subpacket_map, + RMI_REG_DESC_SUBPACKET_BITS); + + rmi_dbg(RMI_DEBUG_CORE, &d->dev, + "%s: reg: %d reg size: %ld subpackets: %d\n", __func__, + item->reg, item->reg_size, item->num_subpackets); + + reg = find_next_bit(rdesc->presense_map, + RMI_REG_DESC_PRESENSE_BITS, reg + 1); + } + +free_struct_buff: + kfree(struct_buf); + return ret; +} +EXPORT_SYMBOL_GPL(rmi_read_register_desc); + +const struct rmi_register_desc_item *rmi_get_register_desc_item( + struct rmi_register_descriptor *rdesc, u16 reg) +{ + const struct rmi_register_desc_item *item; + int i; + + for (i = 0; i < rdesc->num_registers; i++) { + item = &rdesc->registers[i]; + if (item->reg == reg) + return item; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(rmi_get_register_desc_item); + +size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc) +{ + const struct rmi_register_desc_item *item; + int i; + size_t size = 0; + + for (i = 0; i < rdesc->num_registers; i++) { + item = &rdesc->registers[i]; + size += item->reg_size; + } + return size; +} +EXPORT_SYMBOL_GPL(rmi_register_desc_calc_size); + +/* Compute the register offset relative to the base address */ +int rmi_register_desc_calc_reg_offset( + struct rmi_register_descriptor *rdesc, u16 reg) +{ + const struct rmi_register_desc_item *item; + int offset = 0; + int i; + + for (i = 0; i < rdesc->num_registers; i++) { + item = &rdesc->registers[i]; + if (item->reg == reg) + return offset; + ++offset; + } + return -1; +} +EXPORT_SYMBOL_GPL(rmi_register_desc_calc_reg_offset); + +bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item, + u8 subpacket) +{ + return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS, + subpacket) == subpacket; +} + +/* Indicates that flash programming is enabled (bootloader mode). */ +#define RMI_F01_STATUS_BOOTLOADER(status) (!!((status) & 0x40)) + +/* + * Given the PDT entry for F01, read the device status register to determine + * if we're stuck in bootloader mode or not. + * + */ +static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev, + const struct pdt_entry *pdt) +{ + int error; + u8 device_status; + + error = rmi_read(rmi_dev, pdt->data_base_addr + pdt->page_start, + &device_status); + if (error) { + dev_err(&rmi_dev->dev, + "Failed to read device status: %d.\n", error); + return error; + } + + return RMI_F01_STATUS_BOOTLOADER(device_status); +} + +static int rmi_count_irqs(struct rmi_device *rmi_dev, + void *ctx, const struct pdt_entry *pdt) +{ + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + int *irq_count = ctx; + + *irq_count += pdt->interrupt_source_count; + if (pdt->function_number == 0x01) { + data->f01_bootloader_mode = + rmi_check_bootloader_mode(rmi_dev, pdt); + if (data->f01_bootloader_mode) + dev_warn(&rmi_dev->dev, + "WARNING: RMI4 device is in bootloader mode!\n"); + } + + return RMI_SCAN_CONTINUE; +} + +static int rmi_initial_reset(struct rmi_device *rmi_dev, + void *ctx, const struct pdt_entry *pdt) +{ + int error; + + if (pdt->function_number == 0x01) { + u16 cmd_addr = pdt->page_start + pdt->command_base_addr; + u8 cmd_buf = RMI_DEVICE_RESET_CMD; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(rmi_dev); + + if (rmi_dev->xport->ops->reset) { + error = rmi_dev->xport->ops->reset(rmi_dev->xport, + cmd_addr); + if (error) + return error; + + return RMI_SCAN_DONE; + } + + error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1); + if (error) { + dev_err(&rmi_dev->dev, + "Initial reset failed. Code = %d.\n", error); + return error; + } + + mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS); + + return RMI_SCAN_DONE; + } + + /* F01 should always be on page 0. If we don't find it there, fail. */ + return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV; +} + +static int rmi_create_function(struct rmi_device *rmi_dev, + void *ctx, const struct pdt_entry *pdt) +{ + struct device *dev = &rmi_dev->dev; + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); + int *current_irq_count = ctx; + struct rmi_function *fn; + int i; + int error; + + rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n", + pdt->function_number); + + fn = kzalloc(sizeof(struct rmi_function) + + BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long), + GFP_KERNEL); + if (!fn) { + dev_err(dev, "Failed to allocate memory for F%02X\n", + pdt->function_number); + return -ENOMEM; + } + + INIT_LIST_HEAD(&fn->node); + rmi_driver_copy_pdt_to_fd(pdt, &fn->fd); + + fn->rmi_dev = rmi_dev; + + fn->num_of_irqs = pdt->interrupt_source_count; + fn->irq_pos = *current_irq_count; + *current_irq_count += fn->num_of_irqs; + + for (i = 0; i < fn->num_of_irqs; i++) + set_bit(fn->irq_pos + i, fn->irq_mask); + + error = rmi_register_function(fn); + if (error) + goto err_put_fn; + + if (pdt->function_number == 0x01) + data->f01_container = fn; + + list_add_tail(&fn->node, &data->function_list); + + return RMI_SCAN_CONTINUE; + +err_put_fn: + put_device(&fn->dev); + return error; +} + +int rmi_driver_suspend(struct rmi_device *rmi_dev) +{ + int retval = 0; + + retval = rmi_suspend_functions(rmi_dev); + if (retval) + dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n", + retval); + + return retval; +} +EXPORT_SYMBOL_GPL(rmi_driver_suspend); + +int rmi_driver_resume(struct rmi_device *rmi_dev) +{ + int retval; + + retval = rmi_resume_functions(rmi_dev); + if (retval) + dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n", + retval); + + return retval; +} +EXPORT_SYMBOL_GPL(rmi_driver_resume); + +static int rmi_driver_remove(struct device *dev) +{ + struct rmi_device *rmi_dev = to_rmi_device(dev); + + rmi_free_function_list(rmi_dev); + + return 0; +} + +#ifdef CONFIG_OF +static int rmi_driver_of_probe(struct device *dev, + struct rmi_device_platform_data *pdata) +{ + int retval; + + retval = rmi_of_property_read_u32(dev, &pdata->reset_delay_ms, + "syna,reset-delay-ms", 1); + if (retval) + return retval; + + return 0; +} +#else +static inline int rmi_driver_of_probe(struct device *dev, + struct rmi_device_platform_data *pdata) +{ + return -ENODEV; +} +#endif + +static int rmi_driver_probe(struct device *dev) +{ + struct rmi_driver *rmi_driver; + struct rmi_driver_data *data; + struct rmi_device_platform_data *pdata; + struct rmi_device *rmi_dev; + size_t size; + void *irq_memory; + int irq_count; + int retval; + + rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n", + __func__); + + if (!rmi_is_physical_device(dev)) { + rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n"); + return -ENODEV; + } + + rmi_dev = to_rmi_device(dev); + rmi_driver = to_rmi_driver(dev->driver); + rmi_dev->driver = rmi_driver; + + pdata = rmi_get_platform_data(rmi_dev); + + if (rmi_dev->xport->dev->of_node) { + retval = rmi_driver_of_probe(rmi_dev->xport->dev, pdata); + if (retval) + return retval; + } + + data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + INIT_LIST_HEAD(&data->function_list); + data->rmi_dev = rmi_dev; + dev_set_drvdata(&rmi_dev->dev, data); + + /* + * Right before a warm boot, the sensor might be in some unusual state, + * such as F54 diagnostics, or F34 bootloader mode after a firmware + * or configuration update. In order to clear the sensor to a known + * state and/or apply any updates, we issue a initial reset to clear any + * previous settings and force it into normal operation. + * + * We have to do this before actually building the PDT because + * the reflash updates (if any) might cause various registers to move + * around. + * + * For a number of reasons, this initial reset may fail to return + * within the specified time, but we'll still be able to bring up the + * driver normally after that failure. This occurs most commonly in + * a cold boot situation (where then firmware takes longer to come up + * than from a warm boot) and the reset_delay_ms in the platform data + * has been set too short to accommodate that. Since the sensor will + * eventually come up and be usable, we don't want to just fail here + * and leave the customer's device unusable. So we warn them, and + * continue processing. + */ + retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset); + if (retval < 0) + dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n"); + + retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props); + if (retval < 0) { + /* + * we'll print out a warning and continue since + * failure to get the PDT properties is not a cause to fail + */ + dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n", + PDT_PROPERTIES_LOCATION, retval); + } + + /* + * We need to count the IRQs and allocate their storage before scanning + * the PDT and creating the function entries, because adding a new + * function can trigger events that result in the IRQ related storage + * being accessed. + */ + rmi_dbg(RMI_DEBUG_CORE, dev, "Counting IRQs.\n"); + irq_count = 0; + retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs); + if (retval < 0) { + dev_err(dev, "IRQ counting failed with code %d.\n", retval); + goto err; + } + data->irq_count = irq_count; + data->num_of_irq_regs = (data->irq_count + 7) / 8; + + mutex_init(&data->irq_mutex); + + size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long); + irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL); + if (!irq_memory) { + dev_err(dev, "Failed to allocate memory for irq masks.\n"); + goto err; + } + + data->irq_status = irq_memory + size * 0; + data->fn_irq_bits = irq_memory + size * 1; + data->current_irq_mask = irq_memory + size * 2; + data->new_irq_mask = irq_memory + size * 3; + + if (rmi_dev->xport->input) { + /* + * The transport driver already has an input device. + * In some cases it is preferable to reuse the transport + * devices input device instead of creating a new one here. + * One example is some HID touchpads report "pass-through" + * button events are not reported by rmi registers. + */ + data->input = rmi_dev->xport->input; + } else { + data->input = devm_input_allocate_device(dev); + if (!data->input) { + dev_err(dev, "%s: Failed to allocate input device.\n", + __func__); + retval = -ENOMEM; + goto err_destroy_functions; + } + rmi_driver_set_input_params(rmi_dev, data->input); + data->input->phys = devm_kasprintf(dev, GFP_KERNEL, + "%s/input0", dev_name(dev)); + } + + irq_count = 0; + rmi_dbg(RMI_DEBUG_CORE, dev, "Creating functions."); + retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function); + if (retval < 0) { + dev_err(dev, "Function creation failed with code %d.\n", + retval); + goto err_destroy_functions; + } + + if (!data->f01_container) { + dev_err(dev, "Missing F01 container!\n"); + retval = -EINVAL; + goto err_destroy_functions; + } + + retval = rmi_read_block(rmi_dev, + data->f01_container->fd.control_base_addr + 1, + data->current_irq_mask, data->num_of_irq_regs); + if (retval < 0) { + dev_err(dev, "%s: Failed to read current IRQ mask.\n", + __func__); + goto err_destroy_functions; + } + + if (data->input) { + rmi_driver_set_input_name(rmi_dev, data->input); + if (!rmi_dev->xport->input) { + if (input_register_device(data->input)) { + dev_err(dev, "%s: Failed to register input device.\n", + __func__); + goto err_destroy_functions; + } + } + } + + if (data->f01_container->dev.driver) + /* Driver already bound, so enable ATTN now. */ + return enable_sensor(rmi_dev); + + return 0; + +err_destroy_functions: + rmi_free_function_list(rmi_dev); +err: + return retval < 0 ? retval : 0; +} + +static struct rmi_driver rmi_physical_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "rmi4_physical", + .bus = &rmi_bus_type, + .probe = rmi_driver_probe, + .remove = rmi_driver_remove, + }, + .reset_handler = rmi_driver_reset_handler, + .clear_irq_bits = rmi_driver_clear_irq_bits, + .set_irq_bits = rmi_driver_set_irq_bits, + .set_input_params = rmi_driver_set_input_params, +}; + +bool rmi_is_physical_driver(struct device_driver *drv) +{ + return drv == &rmi_physical_driver.driver; +} + +int __init rmi_register_physical_driver(void) +{ + int error; + + error = driver_register(&rmi_physical_driver.driver); + if (error) { + pr_err("%s: driver register failed, code=%d.\n", __func__, + error); + return error; + } + + return 0; +} + +void __exit rmi_unregister_physical_driver(void) +{ + driver_unregister(&rmi_physical_driver.driver); +} |