diff options
Diffstat (limited to 'drivers/input/rmi4/rmi_f11.c')
| -rw-r--r-- | drivers/input/rmi4/rmi_f11.c | 1317 |
1 files changed, 1317 insertions, 0 deletions
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c new file mode 100644 index 000000000..ec8a10d53 --- /dev/null +++ b/drivers/input/rmi4/rmi_f11.c @@ -0,0 +1,1317 @@ +/* + * Copyright (c) 2011-2015 Synaptics Incorporated + * Copyright (c) 2011 Unixphere + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/kconfig.h> +#include <linux/rmi.h> +#include <linux/slab.h> +#include <linux/of.h> +#include "rmi_driver.h" +#include "rmi_2d_sensor.h" + +#define F11_MAX_NUM_OF_FINGERS 10 +#define F11_MAX_NUM_OF_TOUCH_SHAPES 16 + +#define FINGER_STATE_MASK 0x03 + +#define F11_CTRL_SENSOR_MAX_X_POS_OFFSET 6 +#define F11_CTRL_SENSOR_MAX_Y_POS_OFFSET 8 + +#define DEFAULT_XY_MAX 9999 +#define DEFAULT_MAX_ABS_MT_PRESSURE 255 +#define DEFAULT_MAX_ABS_MT_TOUCH 15 +#define DEFAULT_MAX_ABS_MT_ORIENTATION 1 +#define DEFAULT_MIN_ABS_MT_TRACKING_ID 1 +#define DEFAULT_MAX_ABS_MT_TRACKING_ID 10 + +/** A note about RMI4 F11 register structure. + * + * The properties for + * a given sensor are described by its query registers. The number of query + * registers and the layout of their contents are described by the F11 device + * queries as well as the sensor query information. + * + * Similarly, each sensor has control registers that govern its behavior. The + * size and layout of the control registers for a given sensor can be determined + * by parsing that sensors query registers. + * + * And in a likewise fashion, each sensor has data registers where it reports + * its touch data and other interesting stuff. The size and layout of a + * sensors data registers must be determined by parsing its query registers. + * + * The short story is that we need to read and parse a lot of query + * registers in order to determine the attributes of a sensor. Then + * we need to use that data to compute the size of the control and data + * registers for sensor. + * + * The end result is that we have a number of structs that aren't used to + * directly generate the input events, but their size, location and contents + * are critical to determining where the data we are interested in lives. + * + * At this time, the driver does not yet comprehend all possible F11 + * configuration options, but it should be sufficient to cover 99% of RMI4 F11 + * devices currently in the field. + */ + +/* maximum ABS_MT_POSITION displacement (in mm) */ +#define DMAX 10 + +/** + * @rezero - writing this to the F11 command register will cause the sensor to + * calibrate to the current capacitive state. + */ +#define RMI_F11_REZERO 0x01 + +#define RMI_F11_HAS_QUERY9 (1 << 3) +#define RMI_F11_HAS_QUERY11 (1 << 4) +#define RMI_F11_HAS_QUERY12 (1 << 5) +#define RMI_F11_HAS_QUERY27 (1 << 6) +#define RMI_F11_HAS_QUERY28 (1 << 7) + +/** Defs for Query 1 */ + +#define RMI_F11_NR_FINGERS_MASK 0x07 +#define RMI_F11_HAS_REL (1 << 3) +#define RMI_F11_HAS_ABS (1 << 4) +#define RMI_F11_HAS_GESTURES (1 << 5) +#define RMI_F11_HAS_SENSITIVITY_ADJ (1 << 6) +#define RMI_F11_CONFIGURABLE (1 << 7) + +/** Defs for Query 2, 3, and 4. */ +#define RMI_F11_NR_ELECTRODES_MASK 0x7F + +/** Defs for Query 5 */ + +#define RMI_F11_ABS_DATA_SIZE_MASK 0x03 +#define RMI_F11_HAS_ANCHORED_FINGER (1 << 2) +#define RMI_F11_HAS_ADJ_HYST (1 << 3) +#define RMI_F11_HAS_DRIBBLE (1 << 4) +#define RMI_F11_HAS_BENDING_CORRECTION (1 << 5) +#define RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION (1 << 6) +#define RMI_F11_HAS_JITTER_FILTER (1 << 7) + +/** Defs for Query 7 */ +#define RMI_F11_HAS_SINGLE_TAP (1 << 0) +#define RMI_F11_HAS_TAP_AND_HOLD (1 << 1) +#define RMI_F11_HAS_DOUBLE_TAP (1 << 2) +#define RMI_F11_HAS_EARLY_TAP (1 << 3) +#define RMI_F11_HAS_FLICK (1 << 4) +#define RMI_F11_HAS_PRESS (1 << 5) +#define RMI_F11_HAS_PINCH (1 << 6) +#define RMI_F11_HAS_CHIRAL (1 << 7) + +/** Defs for Query 8 */ +#define RMI_F11_HAS_PALM_DET (1 << 0) +#define RMI_F11_HAS_ROTATE (1 << 1) +#define RMI_F11_HAS_TOUCH_SHAPES (1 << 2) +#define RMI_F11_HAS_SCROLL_ZONES (1 << 3) +#define RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES (1 << 4) +#define RMI_F11_HAS_MF_SCROLL (1 << 5) +#define RMI_F11_HAS_MF_EDGE_MOTION (1 << 6) +#define RMI_F11_HAS_MF_SCROLL_INERTIA (1 << 7) + +/** Defs for Query 9. */ +#define RMI_F11_HAS_PEN (1 << 0) +#define RMI_F11_HAS_PROXIMITY (1 << 1) +#define RMI_F11_HAS_PALM_DET_SENSITIVITY (1 << 2) +#define RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT (1 << 3) +#define RMI_F11_HAS_TWO_PEN_THRESHOLDS (1 << 4) +#define RMI_F11_HAS_CONTACT_GEOMETRY (1 << 5) +#define RMI_F11_HAS_PEN_HOVER_DISCRIMINATION (1 << 6) +#define RMI_F11_HAS_PEN_FILTERS (1 << 7) + +/** Defs for Query 10. */ +#define RMI_F11_NR_TOUCH_SHAPES_MASK 0x1F + +/** Defs for Query 11 */ + +#define RMI_F11_HAS_Z_TUNING (1 << 0) +#define RMI_F11_HAS_ALGORITHM_SELECTION (1 << 1) +#define RMI_F11_HAS_W_TUNING (1 << 2) +#define RMI_F11_HAS_PITCH_INFO (1 << 3) +#define RMI_F11_HAS_FINGER_SIZE (1 << 4) +#define RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS (1 << 5) +#define RMI_F11_HAS_XY_CLIP (1 << 6) +#define RMI_F11_HAS_DRUMMING_FILTER (1 << 7) + +/** Defs for Query 12. */ + +#define RMI_F11_HAS_GAPLESS_FINGER (1 << 0) +#define RMI_F11_HAS_GAPLESS_FINGER_TUNING (1 << 1) +#define RMI_F11_HAS_8BIT_W (1 << 2) +#define RMI_F11_HAS_ADJUSTABLE_MAPPING (1 << 3) +#define RMI_F11_HAS_INFO2 (1 << 4) +#define RMI_F11_HAS_PHYSICAL_PROPS (1 << 5) +#define RMI_F11_HAS_FINGER_LIMIT (1 << 6) +#define RMI_F11_HAS_LINEAR_COEFF (1 << 7) + +/** Defs for Query 13. */ + +#define RMI_F11_JITTER_WINDOW_MASK 0x1F +#define RMI_F11_JITTER_FILTER_MASK 0x60 +#define RMI_F11_JITTER_FILTER_SHIFT 5 + +/** Defs for Query 14. */ +#define RMI_F11_LIGHT_CONTROL_MASK 0x03 +#define RMI_F11_IS_CLEAR (1 << 2) +#define RMI_F11_CLICKPAD_PROPS_MASK 0x18 +#define RMI_F11_CLICKPAD_PROPS_SHIFT 3 +#define RMI_F11_MOUSE_BUTTONS_MASK 0x60 +#define RMI_F11_MOUSE_BUTTONS_SHIFT 5 +#define RMI_F11_HAS_ADVANCED_GESTURES (1 << 7) + +#define RMI_F11_QUERY_SIZE 4 +#define RMI_F11_QUERY_GESTURE_SIZE 2 + +#define F11_LIGHT_CTL_NONE 0x00 +#define F11_LUXPAD 0x01 +#define F11_DUAL_MODE 0x02 + +#define F11_NOT_CLICKPAD 0x00 +#define F11_HINGED_CLICKPAD 0x01 +#define F11_UNIFORM_CLICKPAD 0x02 + +/** + * Query registers 1 through 4 are always present. + * + * @nr_fingers - describes the maximum number of fingers the 2-D sensor + * supports. + * @has_rel - the sensor supports relative motion reporting. + * @has_abs - the sensor supports absolute poition reporting. + * @has_gestures - the sensor supports gesture reporting. + * @has_sensitivity_adjust - the sensor supports a global sensitivity + * adjustment. + * @configurable - the sensor supports various configuration options. + * @num_of_x_electrodes - the maximum number of electrodes the 2-D sensor + * supports on the X axis. + * @num_of_y_electrodes - the maximum number of electrodes the 2-D sensor + * supports on the Y axis. + * @max_electrodes - the total number of X and Y electrodes that may be + * configured. + * + * Query 5 is present if the has_abs bit is set. + * + * @abs_data_size - describes the format of data reported by the absolute + * data source. Only one format (the kind used here) is supported at this + * time. + * @has_anchored_finger - then the sensor supports the high-precision second + * finger tracking provided by the manual tracking and motion sensitivity + * options. + * @has_adjust_hyst - the difference between the finger release threshold and + * the touch threshold. + * @has_dribble - the sensor supports the generation of dribble interrupts, + * which may be enabled or disabled with the dribble control bit. + * @has_bending_correction - Bending related data registers 28 and 36, and + * control register 52..57 are present. + * @has_large_object_suppression - control register 58 and data register 28 + * exist. + * @has_jitter_filter - query 13 and control 73..76 exist. + * + * Gesture information queries 7 and 8 are present if has_gestures bit is set. + * + * @has_single_tap - a basic single-tap gesture is supported. + * @has_tap_n_hold - tap-and-hold gesture is supported. + * @has_double_tap - double-tap gesture is supported. + * @has_early_tap - early tap is supported and reported as soon as the finger + * lifts for any tap event that could be interpreted as either a single tap + * or as the first tap of a double-tap or tap-and-hold gesture. + * @has_flick - flick detection is supported. + * @has_press - press gesture reporting is supported. + * @has_pinch - pinch gesture detection is supported. + * @has_palm_det - the 2-D sensor notifies the host whenever a large conductive + * object such as a palm or a cheek touches the 2-D sensor. + * @has_rotate - rotation gesture detection is supported. + * @has_touch_shapes - TouchShapes are supported. A TouchShape is a fixed + * rectangular area on the sensor that behaves like a capacitive button. + * @has_scroll_zones - scrolling areas near the sensor edges are supported. + * @has_individual_scroll_zones - if 1, then 4 scroll zones are supported; + * if 0, then only two are supported. + * @has_mf_scroll - the multifinger_scrolling bit will be set when + * more than one finger is involved in a scrolling action. + * + * Convenience for checking bytes in the gesture info registers. This is done + * often enough that we put it here to declutter the conditionals + * + * @query7_nonzero - true if none of the query 7 bits are set + * @query8_nonzero - true if none of the query 8 bits are set + * + * Query 9 is present if the has_query9 is set. + * + * @has_pen - detection of a stylus is supported and registers F11_2D_Ctrl20 + * and F11_2D_Ctrl21 exist. + * @has_proximity - detection of fingers near the sensor is supported and + * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist. + * @has_palm_det_sensitivity - the sensor supports the palm detect sensitivity + * feature and register F11_2D_Ctrl27 exists. + * @has_two_pen_thresholds - is has_pen is also set, then F11_2D_Ctrl35 exists. + * @has_contact_geometry - the sensor supports the use of contact geometry to + * map absolute X and Y target positions and registers F11_2D_Data18 + * through F11_2D_Data27 exist. + * + * Touch shape info (query 10) is present if has_touch_shapes is set. + * + * @nr_touch_shapes - the total number of touch shapes supported. + * + * Query 11 is present if the has_query11 bit is set in query 0. + * + * @has_z_tuning - if set, the sensor supports Z tuning and registers + * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist. + * @has_algorithm_selection - controls choice of noise suppression algorithm + * @has_w_tuning - the sensor supports Wx and Wy scaling and registers + * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist. + * @has_pitch_info - the X and Y pitches of the sensor electrodes can be + * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist. + * @has_finger_size - the default finger width settings for the + * sensor can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44 + * exist. + * @has_segmentation_aggressiveness - the sensor’s ability to distinguish + * multiple objects close together can be configured and register F11_2D_Ctrl45 + * exists. + * @has_XY_clip - the inactive outside borders of the sensor can be + * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist. + * @has_drumming_filter - the sensor can be configured to distinguish + * between a fast flick and a quick drumming movement and registers + * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist. + * + * Query 12 is present if hasQuery12 bit is set. + * + * @has_gapless_finger - control registers relating to gapless finger are + * present. + * @has_gapless_finger_tuning - additional control and data registers relating + * to gapless finger are present. + * @has_8bit_w - larger W value reporting is supported. + * @has_adjustable_mapping - TBD + * @has_info2 - the general info query14 is present + * @has_physical_props - additional queries describing the physical properties + * of the sensor are present. + * @has_finger_limit - indicates that F11 Ctrl 80 exists. + * @has_linear_coeff - indicates that F11 Ctrl 81 exists. + * + * Query 13 is present if Query 5's has_jitter_filter bit is set. + * @jitter_window_size - used by Design Studio 4. + * @jitter_filter_type - used by Design Studio 4. + * + * Query 14 is present if query 12's has_general_info2 flag is set. + * + * @light_control - Indicates what light/led control features are present, if + * any. + * @is_clear - if set, this is a clear sensor (indicating direct pointing + * application), otherwise it's opaque (indicating indirect pointing). + * @clickpad_props - specifies if this is a clickpad, and if so what sort of + * mechanism it uses + * @mouse_buttons - specifies the number of mouse buttons present (if any). + * @has_advanced_gestures - advanced driver gestures are supported. + */ +struct f11_2d_sensor_queries { + /* query1 */ + u8 nr_fingers; + bool has_rel; + bool has_abs; + bool has_gestures; + bool has_sensitivity_adjust; + bool configurable; + + /* query2 */ + u8 nr_x_electrodes; + + /* query3 */ + u8 nr_y_electrodes; + + /* query4 */ + u8 max_electrodes; + + /* query5 */ + u8 abs_data_size; + bool has_anchored_finger; + bool has_adj_hyst; + bool has_dribble; + bool has_bending_correction; + bool has_large_object_suppression; + bool has_jitter_filter; + + u8 f11_2d_query6; + + /* query 7 */ + bool has_single_tap; + bool has_tap_n_hold; + bool has_double_tap; + bool has_early_tap; + bool has_flick; + bool has_press; + bool has_pinch; + bool has_chiral; + + bool query7_nonzero; + + /* query 8 */ + bool has_palm_det; + bool has_rotate; + bool has_touch_shapes; + bool has_scroll_zones; + bool has_individual_scroll_zones; + bool has_mf_scroll; + bool has_mf_edge_motion; + bool has_mf_scroll_inertia; + + bool query8_nonzero; + + /* Query 9 */ + bool has_pen; + bool has_proximity; + bool has_palm_det_sensitivity; + bool has_suppress_on_palm_detect; + bool has_two_pen_thresholds; + bool has_contact_geometry; + bool has_pen_hover_discrimination; + bool has_pen_filters; + + /* Query 10 */ + u8 nr_touch_shapes; + + /* Query 11. */ + bool has_z_tuning; + bool has_algorithm_selection; + bool has_w_tuning; + bool has_pitch_info; + bool has_finger_size; + bool has_segmentation_aggressiveness; + bool has_XY_clip; + bool has_drumming_filter; + + /* Query 12 */ + bool has_gapless_finger; + bool has_gapless_finger_tuning; + bool has_8bit_w; + bool has_adjustable_mapping; + bool has_info2; + bool has_physical_props; + bool has_finger_limit; + bool has_linear_coeff_2; + + /* Query 13 */ + u8 jitter_window_size; + u8 jitter_filter_type; + + /* Query 14 */ + u8 light_control; + bool is_clear; + u8 clickpad_props; + u8 mouse_buttons; + bool has_advanced_gestures; + + /* Query 15 - 18 */ + u16 x_sensor_size_mm; + u16 y_sensor_size_mm; +}; + +/* Defs for Ctrl0. */ +#define RMI_F11_REPORT_MODE_MASK 0x07 +#define RMI_F11_ABS_POS_FILT (1 << 3) +#define RMI_F11_REL_POS_FILT (1 << 4) +#define RMI_F11_REL_BALLISTICS (1 << 5) +#define RMI_F11_DRIBBLE (1 << 6) +#define RMI_F11_REPORT_BEYOND_CLIP (1 << 7) + +/* Defs for Ctrl1. */ +#define RMI_F11_PALM_DETECT_THRESH_MASK 0x0F +#define RMI_F11_MOTION_SENSITIVITY_MASK 0x30 +#define RMI_F11_MANUAL_TRACKING (1 << 6) +#define RMI_F11_MANUAL_TRACKED_FINGER (1 << 7) + +#define RMI_F11_DELTA_X_THRESHOLD 2 +#define RMI_F11_DELTA_Y_THRESHOLD 3 + +#define RMI_F11_CTRL_REG_COUNT 12 + +struct f11_2d_ctrl { + u8 ctrl0_11[RMI_F11_CTRL_REG_COUNT]; + u16 ctrl0_11_address; +}; + +#define RMI_F11_ABS_BYTES 5 +#define RMI_F11_REL_BYTES 2 + +/* Defs for Data 8 */ + +#define RMI_F11_SINGLE_TAP (1 << 0) +#define RMI_F11_TAP_AND_HOLD (1 << 1) +#define RMI_F11_DOUBLE_TAP (1 << 2) +#define RMI_F11_EARLY_TAP (1 << 3) +#define RMI_F11_FLICK (1 << 4) +#define RMI_F11_PRESS (1 << 5) +#define RMI_F11_PINCH (1 << 6) + +/* Defs for Data 9 */ + +#define RMI_F11_PALM_DETECT (1 << 0) +#define RMI_F11_ROTATE (1 << 1) +#define RMI_F11_SHAPE (1 << 2) +#define RMI_F11_SCROLLZONE (1 << 3) +#define RMI_F11_GESTURE_FINGER_COUNT_MASK 0x70 + +/** Handy pointers into our data buffer. + * + * @f_state - start of finger state registers. + * @abs_pos - start of absolute position registers (if present). + * @rel_pos - start of relative data registers (if present). + * @gest_1 - gesture flags (if present). + * @gest_2 - gesture flags & finger count (if present). + * @pinch - pinch motion register (if present). + * @flick - flick distance X & Y, flick time (if present). + * @rotate - rotate motion and finger separation. + * @multi_scroll - chiral deltas for X and Y (if present). + * @scroll_zones - scroll deltas for 4 regions (if present). + */ +struct f11_2d_data { + u8 *f_state; + u8 *abs_pos; + s8 *rel_pos; + u8 *gest_1; + u8 *gest_2; + s8 *pinch; + u8 *flick; + u8 *rotate; + u8 *shapes; + s8 *multi_scroll; + s8 *scroll_zones; +}; + +/** Data pertaining to F11 in general. For per-sensor data, see struct + * f11_2d_sensor. + * + * @dev_query - F11 device specific query registers. + * @dev_controls - F11 device specific control registers. + * @dev_controls_mutex - lock for the control registers. + * @rezero_wait_ms - if nonzero, upon resume we will wait this many + * milliseconds before rezeroing the sensor(s). This is useful in systems with + * poor electrical behavior on resume, where the initial calibration of the + * sensor(s) coming out of sleep state may be bogus. + * @sensors - per sensor data structures. + */ +struct f11_data { + bool has_query9; + bool has_query11; + bool has_query12; + bool has_query27; + bool has_query28; + bool has_acm; + struct f11_2d_ctrl dev_controls; + struct mutex dev_controls_mutex; + u16 rezero_wait_ms; + struct rmi_2d_sensor sensor; + struct f11_2d_sensor_queries sens_query; + struct f11_2d_data data; + struct rmi_2d_sensor_platform_data sensor_pdata; + unsigned long *abs_mask; + unsigned long *rel_mask; + unsigned long *result_bits; +}; + +enum f11_finger_state { + F11_NO_FINGER = 0x00, + F11_PRESENT = 0x01, + F11_INACCURATE = 0x02, + F11_RESERVED = 0x03 +}; + +static void rmi_f11_rel_pos_report(struct f11_data *f11, u8 n_finger) +{ + struct rmi_2d_sensor *sensor = &f11->sensor; + struct f11_2d_data *data = &f11->data; + s8 x, y; + + x = data->rel_pos[n_finger * 2]; + y = data->rel_pos[n_finger * 2 + 1]; + + rmi_2d_sensor_rel_report(sensor, x, y); +} + +static void rmi_f11_abs_pos_process(struct f11_data *f11, + struct rmi_2d_sensor *sensor, + struct rmi_2d_sensor_abs_object *obj, + enum f11_finger_state finger_state, + u8 n_finger) +{ + struct f11_2d_data *data = &f11->data; + u8 *pos_data = &data->abs_pos[n_finger * RMI_F11_ABS_BYTES]; + int tool_type = MT_TOOL_FINGER; + + switch (finger_state) { + case F11_PRESENT: + obj->type = RMI_2D_OBJECT_FINGER; + break; + default: + obj->type = RMI_2D_OBJECT_NONE; + } + + obj->mt_tool = tool_type; + obj->x = (pos_data[0] << 4) | (pos_data[2] & 0x0F); + obj->y = (pos_data[1] << 4) | (pos_data[2] >> 4); + obj->z = pos_data[4]; + obj->wx = pos_data[3] & 0x0f; + obj->wy = pos_data[3] >> 4; + + rmi_2d_sensor_abs_process(sensor, obj, n_finger); +} + +static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger) +{ + return (f_state[n_finger / 4] >> (2 * (n_finger % 4))) & + FINGER_STATE_MASK; +} + +static void rmi_f11_finger_handler(struct f11_data *f11, + struct rmi_2d_sensor *sensor, + unsigned long *irq_bits, int num_irq_regs) +{ + const u8 *f_state = f11->data.f_state; + u8 finger_state; + u8 i; + + int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask, + num_irq_regs * 8); + int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask, + num_irq_regs * 8); + + for (i = 0; i < sensor->nbr_fingers; i++) { + /* Possible of having 4 fingers per f_statet register */ + finger_state = rmi_f11_parse_finger_state(f_state, i); + if (finger_state == F11_RESERVED) { + pr_err("Invalid finger state[%d]: 0x%02x", i, + finger_state); + continue; + } + + if (abs_bits) + rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i], + finger_state, i); + + if (rel_bits) + rmi_f11_rel_pos_report(f11, i); + } + + if (abs_bits) { + /* + * the absolute part is made in 2 parts to allow the kernel + * tracking to take place. + */ + if (sensor->kernel_tracking) + input_mt_assign_slots(sensor->input, + sensor->tracking_slots, + sensor->tracking_pos, + sensor->nbr_fingers, + sensor->dmax); + + for (i = 0; i < sensor->nbr_fingers; i++) { + finger_state = rmi_f11_parse_finger_state(f_state, i); + if (finger_state == F11_RESERVED) + /* no need to send twice the error */ + continue; + + rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i); + } + + input_mt_sync_frame(sensor->input); + } +} + +static int f11_2d_construct_data(struct f11_data *f11) +{ + struct rmi_2d_sensor *sensor = &f11->sensor; + struct f11_2d_sensor_queries *query = &f11->sens_query; + struct f11_2d_data *data = &f11->data; + int i; + + sensor->nbr_fingers = (query->nr_fingers == 5 ? 10 : + query->nr_fingers + 1); + + sensor->pkt_size = DIV_ROUND_UP(sensor->nbr_fingers, 4); + + if (query->has_abs) { + sensor->pkt_size += (sensor->nbr_fingers * 5); + sensor->attn_size = sensor->pkt_size; + } + + if (query->has_rel) + sensor->pkt_size += (sensor->nbr_fingers * 2); + + /* Check if F11_2D_Query7 is non-zero */ + if (query->query7_nonzero) + sensor->pkt_size += sizeof(u8); + + /* Check if F11_2D_Query7 or F11_2D_Query8 is non-zero */ + if (query->query7_nonzero || query->query8_nonzero) + sensor->pkt_size += sizeof(u8); + + if (query->has_pinch || query->has_flick || query->has_rotate) { + sensor->pkt_size += 3; + if (!query->has_flick) + sensor->pkt_size--; + if (!query->has_rotate) + sensor->pkt_size--; + } + + if (query->has_touch_shapes) + sensor->pkt_size += + DIV_ROUND_UP(query->nr_touch_shapes + 1, 8); + + sensor->data_pkt = devm_kzalloc(&sensor->fn->dev, sensor->pkt_size, + GFP_KERNEL); + if (!sensor->data_pkt) + return -ENOMEM; + + data->f_state = sensor->data_pkt; + i = DIV_ROUND_UP(sensor->nbr_fingers, 4); + + if (query->has_abs) { + data->abs_pos = &sensor->data_pkt[i]; + i += (sensor->nbr_fingers * RMI_F11_ABS_BYTES); + } + + if (query->has_rel) { + data->rel_pos = &sensor->data_pkt[i]; + i += (sensor->nbr_fingers * RMI_F11_REL_BYTES); + } + + if (query->query7_nonzero) { + data->gest_1 = &sensor->data_pkt[i]; + i++; + } + + if (query->query7_nonzero || query->query8_nonzero) { + data->gest_2 = &sensor->data_pkt[i]; + i++; + } + + if (query->has_pinch) { + data->pinch = &sensor->data_pkt[i]; + i++; + } + + if (query->has_flick) { + if (query->has_pinch) { + data->flick = data->pinch; + i += 2; + } else { + data->flick = &sensor->data_pkt[i]; + i += 3; + } + } + + if (query->has_rotate) { + if (query->has_flick) { + data->rotate = data->flick + 1; + } else { + data->rotate = &sensor->data_pkt[i]; + i += 2; + } + } + + if (query->has_touch_shapes) + data->shapes = &sensor->data_pkt[i]; + + return 0; +} + +static int f11_read_control_regs(struct rmi_function *fn, + struct f11_2d_ctrl *ctrl, u16 ctrl_base_addr) { + struct rmi_device *rmi_dev = fn->rmi_dev; + int error = 0; + + ctrl->ctrl0_11_address = ctrl_base_addr; + error = rmi_read_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11, + RMI_F11_CTRL_REG_COUNT); + if (error < 0) { + dev_err(&fn->dev, "Failed to read ctrl0, code: %d.\n", error); + return error; + } + + return 0; +} + +static int f11_write_control_regs(struct rmi_function *fn, + struct f11_2d_sensor_queries *query, + struct f11_2d_ctrl *ctrl, + u16 ctrl_base_addr) +{ + struct rmi_device *rmi_dev = fn->rmi_dev; + int error; + + error = rmi_write_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11, + RMI_F11_CTRL_REG_COUNT); + if (error < 0) + return error; + + return 0; +} + +static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev, + struct f11_data *f11, + struct f11_2d_sensor_queries *sensor_query, + u16 query_base_addr) +{ + int query_size; + int rc; + u8 query_buf[RMI_F11_QUERY_SIZE]; + bool has_query36 = false; + + rc = rmi_read_block(rmi_dev, query_base_addr, query_buf, + RMI_F11_QUERY_SIZE); + if (rc < 0) + return rc; + + sensor_query->nr_fingers = query_buf[0] & RMI_F11_NR_FINGERS_MASK; + sensor_query->has_rel = !!(query_buf[0] & RMI_F11_HAS_REL); + sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS); + sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES); + sensor_query->has_sensitivity_adjust = + !!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ); + sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE); + + sensor_query->nr_x_electrodes = + query_buf[1] & RMI_F11_NR_ELECTRODES_MASK; + sensor_query->nr_y_electrodes = + query_buf[2] & RMI_F11_NR_ELECTRODES_MASK; + sensor_query->max_electrodes = + query_buf[3] & RMI_F11_NR_ELECTRODES_MASK; + + query_size = RMI_F11_QUERY_SIZE; + + if (sensor_query->has_abs) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf); + if (rc < 0) + return rc; + + sensor_query->abs_data_size = + query_buf[0] & RMI_F11_ABS_DATA_SIZE_MASK; + sensor_query->has_anchored_finger = + !!(query_buf[0] & RMI_F11_HAS_ANCHORED_FINGER); + sensor_query->has_adj_hyst = + !!(query_buf[0] & RMI_F11_HAS_ADJ_HYST); + sensor_query->has_dribble = + !!(query_buf[0] & RMI_F11_HAS_DRIBBLE); + sensor_query->has_bending_correction = + !!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION); + sensor_query->has_large_object_suppression = + !!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION); + sensor_query->has_jitter_filter = + !!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER); + query_size++; + } + + if (sensor_query->has_rel) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, + &sensor_query->f11_2d_query6); + if (rc < 0) + return rc; + query_size++; + } + + if (sensor_query->has_gestures) { + rc = rmi_read_block(rmi_dev, query_base_addr + query_size, + query_buf, RMI_F11_QUERY_GESTURE_SIZE); + if (rc < 0) + return rc; + + sensor_query->has_single_tap = + !!(query_buf[0] & RMI_F11_HAS_SINGLE_TAP); + sensor_query->has_tap_n_hold = + !!(query_buf[0] & RMI_F11_HAS_TAP_AND_HOLD); + sensor_query->has_double_tap = + !!(query_buf[0] & RMI_F11_HAS_DOUBLE_TAP); + sensor_query->has_early_tap = + !!(query_buf[0] & RMI_F11_HAS_EARLY_TAP); + sensor_query->has_flick = + !!(query_buf[0] & RMI_F11_HAS_FLICK); + sensor_query->has_press = + !!(query_buf[0] & RMI_F11_HAS_PRESS); + sensor_query->has_pinch = + !!(query_buf[0] & RMI_F11_HAS_PINCH); + sensor_query->has_chiral = + !!(query_buf[0] & RMI_F11_HAS_CHIRAL); + + /* query 8 */ + sensor_query->has_palm_det = + !!(query_buf[1] & RMI_F11_HAS_PALM_DET); + sensor_query->has_rotate = + !!(query_buf[1] & RMI_F11_HAS_ROTATE); + sensor_query->has_touch_shapes = + !!(query_buf[1] & RMI_F11_HAS_TOUCH_SHAPES); + sensor_query->has_scroll_zones = + !!(query_buf[1] & RMI_F11_HAS_SCROLL_ZONES); + sensor_query->has_individual_scroll_zones = + !!(query_buf[1] & RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES); + sensor_query->has_mf_scroll = + !!(query_buf[1] & RMI_F11_HAS_MF_SCROLL); + sensor_query->has_mf_edge_motion = + !!(query_buf[1] & RMI_F11_HAS_MF_EDGE_MOTION); + sensor_query->has_mf_scroll_inertia = + !!(query_buf[1] & RMI_F11_HAS_MF_SCROLL_INERTIA); + + sensor_query->query7_nonzero = !!(query_buf[0]); + sensor_query->query8_nonzero = !!(query_buf[1]); + + query_size += 2; + } + + if (f11->has_query9) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf); + if (rc < 0) + return rc; + + sensor_query->has_pen = + !!(query_buf[0] & RMI_F11_HAS_PEN); + sensor_query->has_proximity = + !!(query_buf[0] & RMI_F11_HAS_PROXIMITY); + sensor_query->has_palm_det_sensitivity = + !!(query_buf[0] & RMI_F11_HAS_PALM_DET_SENSITIVITY); + sensor_query->has_suppress_on_palm_detect = + !!(query_buf[0] & RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT); + sensor_query->has_two_pen_thresholds = + !!(query_buf[0] & RMI_F11_HAS_TWO_PEN_THRESHOLDS); + sensor_query->has_contact_geometry = + !!(query_buf[0] & RMI_F11_HAS_CONTACT_GEOMETRY); + sensor_query->has_pen_hover_discrimination = + !!(query_buf[0] & RMI_F11_HAS_PEN_HOVER_DISCRIMINATION); + sensor_query->has_pen_filters = + !!(query_buf[0] & RMI_F11_HAS_PEN_FILTERS); + + query_size++; + } + + if (sensor_query->has_touch_shapes) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf); + if (rc < 0) + return rc; + + sensor_query->nr_touch_shapes = query_buf[0] & + RMI_F11_NR_TOUCH_SHAPES_MASK; + + query_size++; + } + + if (f11->has_query11) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf); + if (rc < 0) + return rc; + + sensor_query->has_z_tuning = + !!(query_buf[0] & RMI_F11_HAS_Z_TUNING); + sensor_query->has_algorithm_selection = + !!(query_buf[0] & RMI_F11_HAS_ALGORITHM_SELECTION); + sensor_query->has_w_tuning = + !!(query_buf[0] & RMI_F11_HAS_W_TUNING); + sensor_query->has_pitch_info = + !!(query_buf[0] & RMI_F11_HAS_PITCH_INFO); + sensor_query->has_finger_size = + !!(query_buf[0] & RMI_F11_HAS_FINGER_SIZE); + sensor_query->has_segmentation_aggressiveness = + !!(query_buf[0] & + RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS); + sensor_query->has_XY_clip = + !!(query_buf[0] & RMI_F11_HAS_XY_CLIP); + sensor_query->has_drumming_filter = + !!(query_buf[0] & RMI_F11_HAS_DRUMMING_FILTER); + + query_size++; + } + + if (f11->has_query12) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf); + if (rc < 0) + return rc; + + sensor_query->has_gapless_finger = + !!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER); + sensor_query->has_gapless_finger_tuning = + !!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER_TUNING); + sensor_query->has_8bit_w = + !!(query_buf[0] & RMI_F11_HAS_8BIT_W); + sensor_query->has_adjustable_mapping = + !!(query_buf[0] & RMI_F11_HAS_ADJUSTABLE_MAPPING); + sensor_query->has_info2 = + !!(query_buf[0] & RMI_F11_HAS_INFO2); + sensor_query->has_physical_props = + !!(query_buf[0] & RMI_F11_HAS_PHYSICAL_PROPS); + sensor_query->has_finger_limit = + !!(query_buf[0] & RMI_F11_HAS_FINGER_LIMIT); + sensor_query->has_linear_coeff_2 = + !!(query_buf[0] & RMI_F11_HAS_LINEAR_COEFF); + + query_size++; + } + + if (sensor_query->has_jitter_filter) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf); + if (rc < 0) + return rc; + + sensor_query->jitter_window_size = query_buf[0] & + RMI_F11_JITTER_WINDOW_MASK; + sensor_query->jitter_filter_type = (query_buf[0] & + RMI_F11_JITTER_FILTER_MASK) >> + RMI_F11_JITTER_FILTER_SHIFT; + + query_size++; + } + + if (sensor_query->has_info2) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf); + if (rc < 0) + return rc; + + sensor_query->light_control = + query_buf[0] & RMI_F11_LIGHT_CONTROL_MASK; + sensor_query->is_clear = + !!(query_buf[0] & RMI_F11_IS_CLEAR); + sensor_query->clickpad_props = + (query_buf[0] & RMI_F11_CLICKPAD_PROPS_MASK) >> + RMI_F11_CLICKPAD_PROPS_SHIFT; + sensor_query->mouse_buttons = + (query_buf[0] & RMI_F11_MOUSE_BUTTONS_MASK) >> + RMI_F11_MOUSE_BUTTONS_SHIFT; + sensor_query->has_advanced_gestures = + !!(query_buf[0] & RMI_F11_HAS_ADVANCED_GESTURES); + + query_size++; + } + + if (sensor_query->has_physical_props) { + rc = rmi_read_block(rmi_dev, query_base_addr + + query_size, query_buf, 4); + if (rc < 0) + return rc; + + sensor_query->x_sensor_size_mm = + (query_buf[0] | (query_buf[1] << 8)) / 10; + sensor_query->y_sensor_size_mm = + (query_buf[2] | (query_buf[3] << 8)) / 10; + + /* + * query 15 - 18 contain the size of the sensor + * and query 19 - 26 contain bezel dimensions + */ + query_size += 12; + } + + if (f11->has_query27) + ++query_size; + + if (f11->has_query28) { + rc = rmi_read(rmi_dev, query_base_addr + query_size, + query_buf); + if (rc < 0) + return rc; + + has_query36 = !!(query_buf[0] & BIT(6)); + } + + if (has_query36) { + query_size += 2; + rc = rmi_read(rmi_dev, query_base_addr + query_size, + query_buf); + if (rc < 0) + return rc; + + if (!!(query_buf[0] & BIT(5))) + f11->has_acm = true; + } + + return query_size; +} + +static int rmi_f11_initialize(struct rmi_function *fn) +{ + struct rmi_device *rmi_dev = fn->rmi_dev; + struct f11_data *f11; + struct f11_2d_ctrl *ctrl; + u8 query_offset; + u16 query_base_addr; + u16 control_base_addr; + u16 max_x_pos, max_y_pos; + int rc; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(rmi_dev); + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); + struct rmi_2d_sensor *sensor; + u8 buf; + int mask_size; + + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Initializing F11 values.\n"); + + mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long); + + /* + ** init instance data, fill in values and create any sysfs files + */ + f11 = devm_kzalloc(&fn->dev, sizeof(struct f11_data) + mask_size * 3, + GFP_KERNEL); + if (!f11) + return -ENOMEM; + + if (fn->dev.of_node) { + rc = rmi_2d_sensor_of_probe(&fn->dev, &f11->sensor_pdata); + if (rc) + return rc; + } else if (pdata->sensor_pdata) { + f11->sensor_pdata = *pdata->sensor_pdata; + } + + f11->rezero_wait_ms = f11->sensor_pdata.rezero_wait; + + f11->abs_mask = (unsigned long *)((char *)f11 + + sizeof(struct f11_data)); + f11->rel_mask = (unsigned long *)((char *)f11 + + sizeof(struct f11_data) + mask_size); + f11->result_bits = (unsigned long *)((char *)f11 + + sizeof(struct f11_data) + mask_size * 2); + + set_bit(fn->irq_pos, f11->abs_mask); + set_bit(fn->irq_pos + 1, f11->rel_mask); + + query_base_addr = fn->fd.query_base_addr; + control_base_addr = fn->fd.control_base_addr; + + rc = rmi_read(rmi_dev, query_base_addr, &buf); + if (rc < 0) + return rc; + + f11->has_query9 = !!(buf & RMI_F11_HAS_QUERY9); + f11->has_query11 = !!(buf & RMI_F11_HAS_QUERY11); + f11->has_query12 = !!(buf & RMI_F11_HAS_QUERY12); + f11->has_query27 = !!(buf & RMI_F11_HAS_QUERY27); + f11->has_query28 = !!(buf & RMI_F11_HAS_QUERY28); + + query_offset = (query_base_addr + 1); + sensor = &f11->sensor; + sensor->fn = fn; + + rc = rmi_f11_get_query_parameters(rmi_dev, f11, + &f11->sens_query, query_offset); + if (rc < 0) + return rc; + query_offset += rc; + + rc = f11_read_control_regs(fn, &f11->dev_controls, + control_base_addr); + if (rc < 0) { + dev_err(&fn->dev, + "Failed to read F11 control params.\n"); + return rc; + } + + if (f11->sens_query.has_info2) { + if (f11->sens_query.is_clear) + f11->sensor.sensor_type = rmi_sensor_touchscreen; + else + f11->sensor.sensor_type = rmi_sensor_touchpad; + } + + sensor->report_abs = f11->sens_query.has_abs; + + sensor->axis_align = + f11->sensor_pdata.axis_align; + + sensor->topbuttonpad = f11->sensor_pdata.topbuttonpad; + sensor->kernel_tracking = f11->sensor_pdata.kernel_tracking; + sensor->dmax = f11->sensor_pdata.dmax; + + if (f11->sens_query.has_physical_props) { + sensor->x_mm = f11->sens_query.x_sensor_size_mm; + sensor->y_mm = f11->sens_query.y_sensor_size_mm; + } else { + sensor->x_mm = f11->sensor_pdata.x_mm; + sensor->y_mm = f11->sensor_pdata.y_mm; + } + + if (sensor->sensor_type == rmi_sensor_default) + sensor->sensor_type = + f11->sensor_pdata.sensor_type; + + sensor->report_abs = sensor->report_abs + && !(f11->sensor_pdata.disable_report_mask + & RMI_F11_DISABLE_ABS_REPORT); + + if (!sensor->report_abs) + /* + * If device doesn't have abs or if it has been disables + * fallback to reporting rel data. + */ + sensor->report_rel = f11->sens_query.has_rel; + + rc = rmi_read_block(rmi_dev, + control_base_addr + F11_CTRL_SENSOR_MAX_X_POS_OFFSET, + (u8 *)&max_x_pos, sizeof(max_x_pos)); + if (rc < 0) + return rc; + + rc = rmi_read_block(rmi_dev, + control_base_addr + F11_CTRL_SENSOR_MAX_Y_POS_OFFSET, + (u8 *)&max_y_pos, sizeof(max_y_pos)); + if (rc < 0) + return rc; + + sensor->max_x = max_x_pos; + sensor->max_y = max_y_pos; + + rc = f11_2d_construct_data(f11); + if (rc < 0) + return rc; + + if (f11->has_acm) + f11->sensor.attn_size += f11->sensor.nbr_fingers * 2; + + /* allocate the in-kernel tracking buffers */ + sensor->tracking_pos = devm_kzalloc(&fn->dev, + sizeof(struct input_mt_pos) * sensor->nbr_fingers, + GFP_KERNEL); + sensor->tracking_slots = devm_kzalloc(&fn->dev, + sizeof(int) * sensor->nbr_fingers, GFP_KERNEL); + sensor->objs = devm_kzalloc(&fn->dev, + sizeof(struct rmi_2d_sensor_abs_object) + * sensor->nbr_fingers, GFP_KERNEL); + if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs) + return -ENOMEM; + + ctrl = &f11->dev_controls; + if (sensor->axis_align.delta_x_threshold) + ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] = + sensor->axis_align.delta_x_threshold; + + if (sensor->axis_align.delta_y_threshold) + ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] = + sensor->axis_align.delta_y_threshold; + + if (f11->sens_query.has_dribble) + ctrl->ctrl0_11[0] = ctrl->ctrl0_11[0] & ~BIT(6); + + if (f11->sens_query.has_palm_det) + ctrl->ctrl0_11[11] = ctrl->ctrl0_11[11] & ~BIT(0); + + rc = f11_write_control_regs(fn, &f11->sens_query, + &f11->dev_controls, fn->fd.query_base_addr); + if (rc) + dev_warn(&fn->dev, "Failed to write control registers\n"); + + mutex_init(&f11->dev_controls_mutex); + + dev_set_drvdata(&fn->dev, f11); + + return 0; +} + +static int rmi_f11_config(struct rmi_function *fn) +{ + struct f11_data *f11 = dev_get_drvdata(&fn->dev); + struct rmi_driver *drv = fn->rmi_dev->driver; + struct rmi_2d_sensor *sensor = &f11->sensor; + int rc; + + if (!sensor->report_abs) + drv->clear_irq_bits(fn->rmi_dev, f11->abs_mask); + else + drv->set_irq_bits(fn->rmi_dev, f11->abs_mask); + + if (!sensor->report_rel) + drv->clear_irq_bits(fn->rmi_dev, f11->rel_mask); + else + drv->set_irq_bits(fn->rmi_dev, f11->rel_mask); + + rc = f11_write_control_regs(fn, &f11->sens_query, + &f11->dev_controls, fn->fd.query_base_addr); + if (rc < 0) + return rc; + + return 0; +} + +static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) +{ + struct rmi_device *rmi_dev = fn->rmi_dev; + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); + struct f11_data *f11 = dev_get_drvdata(&fn->dev); + u16 data_base_addr = fn->fd.data_base_addr; + u16 data_base_addr_offset = 0; + int error; + + if (rmi_dev->xport->attn_data) { + memcpy(f11->sensor.data_pkt, rmi_dev->xport->attn_data, + f11->sensor.attn_size); + rmi_dev->xport->attn_data += f11->sensor.attn_size; + rmi_dev->xport->attn_size -= f11->sensor.attn_size; + } else { + error = rmi_read_block(rmi_dev, + data_base_addr + data_base_addr_offset, + f11->sensor.data_pkt, + f11->sensor.pkt_size); + if (error < 0) + return error; + } + + rmi_f11_finger_handler(f11, &f11->sensor, irq_bits, + drvdata->num_of_irq_regs); + data_base_addr_offset += f11->sensor.pkt_size; + + return 0; +} + +static int rmi_f11_resume(struct rmi_function *fn) +{ + struct f11_data *f11 = dev_get_drvdata(&fn->dev); + int error; + + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Resuming...\n"); + if (!f11->rezero_wait_ms) + return 0; + + mdelay(f11->rezero_wait_ms); + + error = rmi_write(fn->rmi_dev, fn->fd.command_base_addr, + RMI_F11_REZERO); + if (error) { + dev_err(&fn->dev, + "%s: failed to issue rezero command, error = %d.", + __func__, error); + return error; + } + + return 0; +} + +static int rmi_f11_probe(struct rmi_function *fn) +{ + int error; + struct f11_data *f11; + + error = rmi_f11_initialize(fn); + if (error) + return error; + + f11 = dev_get_drvdata(&fn->dev); + error = rmi_2d_sensor_configure_input(fn, &f11->sensor); + if (error) + return error; + + return 0; +} + +struct rmi_function_handler rmi_f11_handler = { + .driver = { + .name = "rmi4_f11", + }, + .func = 0x11, + .probe = rmi_f11_probe, + .config = rmi_f11_config, + .attention = rmi_f11_attention, + .resume = rmi_f11_resume, +}; |