summaryrefslogtreecommitdiff
path: root/drivers/input/tablet/aiptek.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/tablet/aiptek.c')
-rw-r--r--drivers/input/tablet/aiptek.c1940
1 files changed, 1940 insertions, 0 deletions
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
new file mode 100644
index 000000000..e7f966da6
--- /dev/null
+++ b/drivers/input/tablet/aiptek.c
@@ -0,0 +1,1940 @@
+/*
+ * Native support for the Aiptek HyperPen USB Tablets
+ * (4000U/5000U/6000U/8000U/12000U)
+ *
+ * Copyright (c) 2001 Chris Atenasio <chris@crud.net>
+ * Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
+ *
+ * based on wacom.c by
+ * Vojtech Pavlik <vojtech@suse.cz>
+ * Andreas Bach Aaen <abach@stofanet.dk>
+ * Clifford Wolf <clifford@clifford.at>
+ * Sam Mosel <sam.mosel@computer.org>
+ * James E. Blair <corvus@gnu.org>
+ * Daniel Egger <egger@suse.de>
+ *
+ * Many thanks to Oliver Kuechemann for his support.
+ *
+ * ChangeLog:
+ * v0.1 - Initial release
+ * v0.2 - Hack to get around fake event 28's. (Bryan W. Headley)
+ * v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002)
+ * Released to Linux 2.4.19 and 2.5.x
+ * v0.4 - Rewrote substantial portions of the code to deal with
+ * corrected control sequences, timing, dynamic configuration,
+ * support of 6000U - 12000U, procfs, and macro key support
+ * (Jan-1-2003 - Feb-5-2003, Bryan W. Headley)
+ * v1.0 - Added support for diagnostic messages, count of messages
+ * received from URB - Mar-8-2003, Bryan W. Headley
+ * v1.1 - added support for tablet resolution, changed DV and proximity
+ * some corrections - Jun-22-2003, martin schneebacher
+ * - Added support for the sysfs interface, deprecating the
+ * procfs interface for 2.5.x kernel. Also added support for
+ * Wheel command. Bryan W. Headley July-15-2003.
+ * v1.2 - Reworked jitter timer as a kernel thread.
+ * Bryan W. Headley November-28-2003/Jan-10-2004.
+ * v1.3 - Repaired issue of kernel thread going nuts on single-processor
+ * machines, introduced programmableDelay as a command line
+ * parameter. Feb 7 2004, Bryan W. Headley.
+ * v1.4 - Re-wire jitter so it does not require a thread. Courtesy of
+ * Rene van Paassen. Added reporting of physical pointer device
+ * (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know
+ * for reports 1, 6.)
+ * what physical device reports for reports 1, 6.) Also enabled
+ * MOUSE and LENS tool button modes. Renamed "rubber" to "eraser".
+ * Feb 20, 2004, Bryan W. Headley.
+ * v1.5 - Added previousJitterable, so we don't do jitter delay when the
+ * user is holding a button down for periods of time.
+ *
+ * NOTE:
+ * This kernel driver is augmented by the "Aiptek" XFree86 input
+ * driver for your X server, as well as the Gaiptek GUI Front-end
+ * "Tablet Manager".
+ * These three products are highly interactive with one another,
+ * so therefore it's easier to document them all as one subsystem.
+ * Please visit the project's "home page", located at,
+ * http://aiptektablet.sourceforge.net.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v2.3 (May 2, 2007)"
+#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen"
+#define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)"
+
+/*
+ * Aiptek status packet:
+ *
+ * (returned as Report 1 - relative coordinates from mouse and stylus)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 0 0 1
+ * byte1 0 0 0 0 0 BS2 BS Tip
+ * byte2 X7 X6 X5 X4 X3 X2 X1 X0
+ * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ *
+ * (returned as Report 2 - absolute coordinates from the stylus)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 0 1 0
+ * byte1 X7 X6 X5 X4 X3 X2 X1 X0
+ * byte2 X15 X14 X13 X12 X11 X10 X9 X8
+ * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8
+ * byte5 * * * BS2 BS1 Tip IR DV
+ * byte6 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte7 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * (returned as Report 3 - absolute coordinates from the mouse)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 0 1 1
+ * byte1 X7 X6 X5 X4 X3 X2 X1 X0
+ * byte2 X15 X14 X13 X12 X11 X10 X9 X8
+ * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8
+ * byte5 * * * BS2 BS1 Tip IR DV
+ * byte6 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte7 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * (returned as Report 4 - macrokeys from the stylus)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 1 0 0
+ * byte1 0 0 0 BS2 BS Tip IR DV
+ * byte2 0 0 0 0 0 0 1 0
+ * byte3 0 0 0 K4 K3 K2 K1 K0
+ * byte4 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte5 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * (returned as Report 5 - macrokeys from the mouse)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 1 0 1
+ * byte1 0 0 0 BS2 BS Tip IR DV
+ * byte2 0 0 0 0 0 0 1 0
+ * byte3 0 0 0 K4 K3 K2 K1 K0
+ * byte4 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte5 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * IR: In Range = Proximity on
+ * DV = Data Valid
+ * BS = Barrel Switch (as in, macro keys)
+ * BS2 also referred to as Tablet Pick
+ *
+ * Command Summary:
+ *
+ * Use report_type CONTROL (3)
+ * Use report_id 2
+ *
+ * Command/Data Description Return Bytes Return Value
+ * 0x10/0x00 SwitchToMouse 0
+ * 0x10/0x01 SwitchToTablet 0
+ * 0x18/0x04 SetResolution 0
+ * 0x12/0xFF AutoGainOn 0
+ * 0x17/0x00 FilterOn 0
+ * 0x01/0x00 GetXExtension 2 MaxX
+ * 0x01/0x01 GetYExtension 2 MaxY
+ * 0x02/0x00 GetModelCode 2 ModelCode = LOBYTE
+ * 0x03/0x00 GetODMCode 2 ODMCode
+ * 0x08/0x00 GetPressureLevels 2 =512
+ * 0x04/0x00 GetFirmwareVersion 2 Firmware Version
+ * 0x11/0x02 EnableMacroKeys 0
+ *
+ * To initialize the tablet:
+ *
+ * (1) Send Resolution500LPI (Command)
+ * (2) Query for Model code (Option Report)
+ * (3) Query for ODM code (Option Report)
+ * (4) Query for firmware (Option Report)
+ * (5) Query for GetXExtension (Option Report)
+ * (6) Query for GetYExtension (Option Report)
+ * (7) Query for GetPressureLevels (Option Report)
+ * (8) SwitchToTablet for Absolute coordinates, or
+ * SwitchToMouse for Relative coordinates (Command)
+ * (9) EnableMacroKeys (Command)
+ * (10) FilterOn (Command)
+ * (11) AutoGainOn (Command)
+ *
+ * (Step 9 can be omitted, but you'll then have no function keys.)
+ */
+
+#define USB_VENDOR_ID_AIPTEK 0x08ca
+#define USB_VENDOR_ID_KYE 0x0458
+#define USB_REQ_GET_REPORT 0x01
+#define USB_REQ_SET_REPORT 0x09
+
+ /* PointerMode codes
+ */
+#define AIPTEK_POINTER_ONLY_MOUSE_MODE 0
+#define AIPTEK_POINTER_ONLY_STYLUS_MODE 1
+#define AIPTEK_POINTER_EITHER_MODE 2
+
+#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a) \
+ (a == AIPTEK_POINTER_ONLY_MOUSE_MODE || \
+ a == AIPTEK_POINTER_EITHER_MODE)
+#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a) \
+ (a == AIPTEK_POINTER_ONLY_STYLUS_MODE || \
+ a == AIPTEK_POINTER_EITHER_MODE)
+
+ /* CoordinateMode code
+ */
+#define AIPTEK_COORDINATE_RELATIVE_MODE 0
+#define AIPTEK_COORDINATE_ABSOLUTE_MODE 1
+
+ /* XTilt and YTilt values
+ */
+#define AIPTEK_TILT_MIN (-128)
+#define AIPTEK_TILT_MAX 127
+#define AIPTEK_TILT_DISABLE (-10101)
+
+ /* Wheel values
+ */
+#define AIPTEK_WHEEL_MIN 0
+#define AIPTEK_WHEEL_MAX 1024
+#define AIPTEK_WHEEL_DISABLE (-10101)
+
+ /* ToolCode values, which BTW are 0x140 .. 0x14f
+ * We have things set up such that if the tool button has changed,
+ * the tools get reset.
+ */
+ /* toolMode codes
+ */
+#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
+#define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL
+#define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH
+#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH
+#define AIPTEK_TOOL_BUTTON_ERASER_MODE BTN_TOOL_RUBBER
+#define AIPTEK_TOOL_BUTTON_MOUSE_MODE BTN_TOOL_MOUSE
+#define AIPTEK_TOOL_BUTTON_LENS_MODE BTN_TOOL_LENS
+
+ /* Diagnostic message codes
+ */
+#define AIPTEK_DIAGNOSTIC_NA 0
+#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE 1
+#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2
+#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3
+
+ /* Time to wait (in ms) to help mask hand jittering
+ * when pressing the stylus buttons.
+ */
+#define AIPTEK_JITTER_DELAY_DEFAULT 50
+
+ /* Time to wait (in ms) in-between sending the tablet
+ * a command and beginning the process of reading the return
+ * sequence from the tablet.
+ */
+#define AIPTEK_PROGRAMMABLE_DELAY_25 25
+#define AIPTEK_PROGRAMMABLE_DELAY_50 50
+#define AIPTEK_PROGRAMMABLE_DELAY_100 100
+#define AIPTEK_PROGRAMMABLE_DELAY_200 200
+#define AIPTEK_PROGRAMMABLE_DELAY_300 300
+#define AIPTEK_PROGRAMMABLE_DELAY_400 400
+#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT AIPTEK_PROGRAMMABLE_DELAY_400
+
+ /* Mouse button programming
+ */
+#define AIPTEK_MOUSE_LEFT_BUTTON 0x04
+#define AIPTEK_MOUSE_RIGHT_BUTTON 0x08
+#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x10
+
+ /* Stylus button programming
+ */
+#define AIPTEK_STYLUS_LOWER_BUTTON 0x08
+#define AIPTEK_STYLUS_UPPER_BUTTON 0x10
+
+ /* Length of incoming packet from the tablet
+ */
+#define AIPTEK_PACKET_LENGTH 8
+
+ /* We report in EV_MISC both the proximity and
+ * whether the report came from the stylus, tablet mouse
+ * or "unknown" -- Unknown when the tablet is in relative
+ * mode, because we only get report 1's.
+ */
+#define AIPTEK_REPORT_TOOL_UNKNOWN 0x10
+#define AIPTEK_REPORT_TOOL_STYLUS 0x20
+#define AIPTEK_REPORT_TOOL_MOUSE 0x40
+
+static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT;
+static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT;
+
+struct aiptek_features {
+ int odmCode; /* Tablet manufacturer code */
+ int modelCode; /* Tablet model code (not unique) */
+ int firmwareCode; /* prom/eeprom version */
+ char usbPath[64 + 1]; /* device's physical usb path */
+};
+
+struct aiptek_settings {
+ int pointerMode; /* stylus-, mouse-only or either */
+ int coordinateMode; /* absolute/relative coords */
+ int toolMode; /* pen, pencil, brush, etc. tool */
+ int xTilt; /* synthetic xTilt amount */
+ int yTilt; /* synthetic yTilt amount */
+ int wheel; /* synthetic wheel amount */
+ int stylusButtonUpper; /* stylus upper btn delivers... */
+ int stylusButtonLower; /* stylus lower btn delivers... */
+ int mouseButtonLeft; /* mouse left btn delivers... */
+ int mouseButtonMiddle; /* mouse middle btn delivers... */
+ int mouseButtonRight; /* mouse right btn delivers... */
+ int programmableDelay; /* delay for tablet programming */
+ int jitterDelay; /* delay for hand jittering */
+};
+
+struct aiptek {
+ struct input_dev *inputdev; /* input device struct */
+ struct usb_device *usbdev; /* usb device struct */
+ struct usb_interface *intf; /* usb interface struct */
+ struct urb *urb; /* urb for incoming reports */
+ dma_addr_t data_dma; /* our dma stuffage */
+ struct aiptek_features features; /* tablet's array of features */
+ struct aiptek_settings curSetting; /* tablet's current programmable */
+ struct aiptek_settings newSetting; /* ... and new param settings */
+ unsigned int ifnum; /* interface number for IO */
+ int diagnostic; /* tablet diagnostic codes */
+ unsigned long eventCount; /* event count */
+ int inDelay; /* jitter: in jitter delay? */
+ unsigned long endDelay; /* jitter: time when delay ends */
+ int previousJitterable; /* jitterable prev value */
+
+ int lastMacro; /* macro key to reset */
+ int previousToolMode; /* pen, pencil, brush, etc. tool */
+ unsigned char *data; /* incoming packet data */
+};
+
+static const int eventTypes[] = {
+ EV_KEY, EV_ABS, EV_REL, EV_MSC,
+};
+
+static const int absEvents[] = {
+ ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y,
+ ABS_WHEEL, ABS_MISC,
+};
+
+static const int relEvents[] = {
+ REL_X, REL_Y, REL_WHEEL,
+};
+
+static const int buttonEvents[] = {
+ BTN_LEFT, BTN_RIGHT, BTN_MIDDLE,
+ BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH,
+ BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH,
+ BTN_STYLUS, BTN_STYLUS2,
+};
+
+/*
+ * Permit easy lookup of keyboard events to send, versus
+ * the bitmap which comes from the tablet. This hides the
+ * issue that the F_keys are not sequentially numbered.
+ */
+static const int macroKeyEvents[] = {
+ KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
+ KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
+ KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
+ KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23,
+ KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO,
+ KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0
+};
+
+/***********************************************************************
+ * Map values to strings and back. Every map should have the following
+ * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
+ */
+#define AIPTEK_INVALID_VALUE -1
+
+struct aiptek_map {
+ const char *string;
+ int value;
+};
+
+static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count)
+{
+ const struct aiptek_map *p;
+
+ if (str[count - 1] == '\n')
+ count--;
+
+ for (p = map; p->string; p++)
+ if (!strncmp(str, p->string, count))
+ return p->value;
+
+ return AIPTEK_INVALID_VALUE;
+}
+
+static const char *map_val_to_str(const struct aiptek_map *map, int val)
+{
+ const struct aiptek_map *p;
+
+ for (p = map; p->value != AIPTEK_INVALID_VALUE; p++)
+ if (val == p->value)
+ return p->string;
+
+ return "unknown";
+}
+
+/***********************************************************************
+ * aiptek_irq can receive one of six potential reports.
+ * The documentation for each is in the body of the function.
+ *
+ * The tablet reports on several attributes per invocation of
+ * aiptek_irq. Because the Linux Input Event system allows the
+ * transmission of ONE attribute per input_report_xxx() call,
+ * collation has to be done on the other end to reconstitute
+ * a complete tablet report. Further, the number of Input Event reports
+ * submitted varies, depending on what USB report type, and circumstance.
+ * To deal with this, EV_MSC is used to indicate an 'end-of-report'
+ * message. This has been an undocumented convention understood by the kernel
+ * tablet driver and clients such as gpm and XFree86's tablet drivers.
+ *
+ * Of the information received from the tablet, the one piece I
+ * cannot transmit is the proximity bit (without resorting to an EV_MSC
+ * convention above.) I therefore have taken over REL_MISC and ABS_MISC
+ * (for relative and absolute reports, respectively) for communicating
+ * Proximity. Why two events? I thought it interesting to know if the
+ * Proximity event occurred while the tablet was in absolute or relative
+ * mode.
+ * Update: REL_MISC proved not to be such a good idea. With REL_MISC you
+ * get an event transmitted each time. ABS_MISC works better, since it
+ * can be set and re-set. Thus, only using ABS_MISC from now on.
+ *
+ * Other tablets use the notion of a certain minimum stylus pressure
+ * to infer proximity. While that could have been done, that is yet
+ * another 'by convention' behavior, the documentation for which
+ * would be spread between two (or more) pieces of software.
+ *
+ * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and
+ * replaced with the input_sync() method (which emits EV_SYN.)
+ */
+
+static void aiptek_irq(struct urb *urb)
+{
+ struct aiptek *aiptek = urb->context;
+ unsigned char *data = aiptek->data;
+ struct input_dev *inputdev = aiptek->inputdev;
+ struct usb_interface *intf = aiptek->intf;
+ int jitterable = 0;
+ int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
+
+ switch (urb->status) {
+ case 0:
+ /* Success */
+ break;
+
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* This urb is terminated, clean up */
+ dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+ __func__, urb->status);
+ return;
+
+ default:
+ dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+ __func__, urb->status);
+ goto exit;
+ }
+
+ /* See if we are in a delay loop -- throw out report if true.
+ */
+ if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) {
+ goto exit;
+ }
+
+ aiptek->inDelay = 0;
+ aiptek->eventCount++;
+
+ /* Report 1 delivers relative coordinates with either a stylus
+ * or the mouse. You do not know, however, which input
+ * tool generated the event.
+ */
+ if (data[0] == 1) {
+ if (aiptek->curSetting.coordinateMode ==
+ AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+ aiptek->diagnostic =
+ AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
+ } else {
+ x = (signed char) data[2];
+ y = (signed char) data[3];
+
+ /* jitterable keeps track of whether any button has been pressed.
+ * We're also using it to remap the physical mouse button mask
+ * to pseudo-settings. (We don't specifically care about it's
+ * value after moving/transposing mouse button bitmasks, except
+ * that a non-zero value indicates that one or more
+ * mouse button was pressed.)
+ */
+ jitterable = data[1] & 0x07;
+
+ left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0;
+ right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0;
+ middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0;
+
+ input_report_key(inputdev, BTN_LEFT, left);
+ input_report_key(inputdev, BTN_MIDDLE, middle);
+ input_report_key(inputdev, BTN_RIGHT, right);
+
+ input_report_abs(inputdev, ABS_MISC,
+ 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+ input_report_rel(inputdev, REL_X, x);
+ input_report_rel(inputdev, REL_Y, y);
+
+ /* Wheel support is in the form of a single-event
+ * firing.
+ */
+ if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+ input_report_rel(inputdev, REL_WHEEL,
+ aiptek->curSetting.wheel);
+ aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+ }
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+ input_sync(inputdev);
+ }
+ }
+ /* Report 2 is delivered only by the stylus, and delivers
+ * absolute coordinates.
+ */
+ else if (data[0] == 2) {
+ if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+ } else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE
+ (aiptek->curSetting.pointerMode)) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+ } else {
+ x = get_unaligned_le16(data + 1);
+ y = get_unaligned_le16(data + 3);
+ z = get_unaligned_le16(data + 6);
+
+ dv = (data[5] & 0x01) != 0 ? 1 : 0;
+ p = (data[5] & 0x02) != 0 ? 1 : 0;
+ tip = (data[5] & 0x04) != 0 ? 1 : 0;
+
+ /* Use jitterable to re-arrange button masks
+ */
+ jitterable = data[5] & 0x18;
+
+ bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+ pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+ /* dv indicates 'data valid' (e.g., the tablet is in sync
+ * and has delivered a "correct" report) We will ignore
+ * all 'bad' reports...
+ */
+ if (dv != 0) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+
+ if (p != 0) {
+ input_report_abs(inputdev, ABS_X, x);
+ input_report_abs(inputdev, ABS_Y, y);
+ input_report_abs(inputdev, ABS_PRESSURE, z);
+
+ input_report_key(inputdev, BTN_TOUCH, tip);
+ input_report_key(inputdev, BTN_STYLUS, bs);
+ input_report_key(inputdev, BTN_STYLUS2, pck);
+
+ if (aiptek->curSetting.xTilt !=
+ AIPTEK_TILT_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_TILT_X,
+ aiptek->curSetting.xTilt);
+ }
+ if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_TILT_Y,
+ aiptek->curSetting.yTilt);
+ }
+
+ /* Wheel support is in the form of a single-event
+ * firing.
+ */
+ if (aiptek->curSetting.wheel !=
+ AIPTEK_WHEEL_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_WHEEL,
+ aiptek->curSetting.wheel);
+ aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+ }
+ }
+ input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+ input_sync(inputdev);
+ }
+ }
+ }
+ /* Report 3's come from the mouse in absolute mode.
+ */
+ else if (data[0] == 3) {
+ if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+ } else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE
+ (aiptek->curSetting.pointerMode)) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+ } else {
+ x = get_unaligned_le16(data + 1);
+ y = get_unaligned_le16(data + 3);
+
+ jitterable = data[5] & 0x1c;
+
+ dv = (data[5] & 0x01) != 0 ? 1 : 0;
+ p = (data[5] & 0x02) != 0 ? 1 : 0;
+ left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+ right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+ middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+
+ if (dv != 0) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+
+ if (p != 0) {
+ input_report_abs(inputdev, ABS_X, x);
+ input_report_abs(inputdev, ABS_Y, y);
+
+ input_report_key(inputdev, BTN_LEFT, left);
+ input_report_key(inputdev, BTN_MIDDLE, middle);
+ input_report_key(inputdev, BTN_RIGHT, right);
+
+ /* Wheel support is in the form of a single-event
+ * firing.
+ */
+ if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_WHEEL,
+ aiptek->curSetting.wheel);
+ aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+ }
+ }
+ input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+ input_sync(inputdev);
+ }
+ }
+ }
+ /* Report 4s come from the macro keys when pressed by stylus
+ */
+ else if (data[0] == 4) {
+ jitterable = data[1] & 0x18;
+
+ dv = (data[1] & 0x01) != 0 ? 1 : 0;
+ p = (data[1] & 0x02) != 0 ? 1 : 0;
+ tip = (data[1] & 0x04) != 0 ? 1 : 0;
+ bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+ pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+ macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1;
+ z = get_unaligned_le16(data + 4);
+
+ if (dv) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+ }
+
+ if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+ input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+
+ if (macro != -1 && macro != aiptek->lastMacro) {
+ input_report_key(inputdev, macroKeyEvents[macro], 1);
+ aiptek->lastMacro = macro;
+ }
+ input_report_abs(inputdev, ABS_MISC,
+ p | AIPTEK_REPORT_TOOL_STYLUS);
+ input_sync(inputdev);
+ }
+ /* Report 5s come from the macro keys when pressed by mouse
+ */
+ else if (data[0] == 5) {
+ jitterable = data[1] & 0x1c;
+
+ dv = (data[1] & 0x01) != 0 ? 1 : 0;
+ p = (data[1] & 0x02) != 0 ? 1 : 0;
+ left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+ right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+ middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+ macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0;
+
+ if (dv) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode, 1);
+ aiptek->previousToolMode = aiptek->curSetting.toolMode;
+ }
+ }
+
+ if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+ input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+
+ if (macro != -1 && macro != aiptek->lastMacro) {
+ input_report_key(inputdev, macroKeyEvents[macro], 1);
+ aiptek->lastMacro = macro;
+ }
+
+ input_report_abs(inputdev, ABS_MISC,
+ p | AIPTEK_REPORT_TOOL_MOUSE);
+ input_sync(inputdev);
+ }
+ /* We have no idea which tool can generate a report 6. Theoretically,
+ * neither need to, having been given reports 4 & 5 for such use.
+ * However, report 6 is the 'official-looking' report for macroKeys;
+ * reports 4 & 5 supposively are used to support unnamed, unknown
+ * hat switches (which just so happen to be the macroKeys.)
+ */
+ else if (data[0] == 6) {
+ macro = get_unaligned_le16(data + 1);
+ if (macro > 0) {
+ input_report_key(inputdev, macroKeyEvents[macro - 1],
+ 0);
+ }
+ if (macro < 25) {
+ input_report_key(inputdev, macroKeyEvents[macro + 1],
+ 0);
+ }
+
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+
+ input_report_key(inputdev, macroKeyEvents[macro], 1);
+ input_report_abs(inputdev, ABS_MISC,
+ 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+ input_sync(inputdev);
+ } else {
+ dev_dbg(&intf->dev, "Unknown report %d\n", data[0]);
+ }
+
+ /* Jitter may occur when the user presses a button on the stlyus
+ * or the mouse. What we do to prevent that is wait 'x' milliseconds
+ * following a 'jitterable' event, which should give the hand some time
+ * stabilize itself.
+ *
+ * We just introduced aiptek->previousJitterable to carry forth the
+ * notion that jitter occurs when the button state changes from on to off:
+ * a person drawing, holding a button down is not subject to jittering.
+ * With that in mind, changing from upper button depressed to lower button
+ * WILL transition through a jitter delay.
+ */
+
+ if (aiptek->previousJitterable != jitterable &&
+ aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) {
+ aiptek->endDelay = jiffies +
+ ((aiptek->curSetting.jitterDelay * HZ) / 1000);
+ aiptek->inDelay = 1;
+ }
+ aiptek->previousJitterable = jitterable;
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval != 0) {
+ dev_err(&intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
+ }
+}
+
+/***********************************************************************
+ * These are the USB id's known so far. We do not identify them to
+ * specific Aiptek model numbers, because there has been overlaps,
+ * use, and reuse of id's in existing models. Certain models have
+ * been known to use more than one ID, indicative perhaps of
+ * manufacturing revisions. In any event, we consider these
+ * IDs to not be model-specific nor unique.
+ */
+static const struct usb_device_id aiptek_ids[] = {
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+ {USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, aiptek_ids);
+
+/***********************************************************************
+ * Open an instance of the tablet driver.
+ */
+static int aiptek_open(struct input_dev *inputdev)
+{
+ struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+ aiptek->urb->dev = aiptek->usbdev;
+ if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
+ return -EIO;
+
+ return 0;
+}
+
+/***********************************************************************
+ * Close an instance of the tablet driver.
+ */
+static void aiptek_close(struct input_dev *inputdev)
+{
+ struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+ usb_kill_urb(aiptek->urb);
+}
+
+/***********************************************************************
+ * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
+ * where they were known as usb_set_report and usb_get_report.
+ */
+static int
+aiptek_set_report(struct aiptek *aiptek,
+ unsigned char report_type,
+ unsigned char report_id, void *buffer, int size)
+{
+ return usb_control_msg(aiptek->usbdev,
+ usb_sndctrlpipe(aiptek->usbdev, 0),
+ USB_REQ_SET_REPORT,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_OUT, (report_type << 8) + report_id,
+ aiptek->ifnum, buffer, size, 5000);
+}
+
+static int
+aiptek_get_report(struct aiptek *aiptek,
+ unsigned char report_type,
+ unsigned char report_id, void *buffer, int size)
+{
+ return usb_control_msg(aiptek->usbdev,
+ usb_rcvctrlpipe(aiptek->usbdev, 0),
+ USB_REQ_GET_REPORT,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_IN, (report_type << 8) + report_id,
+ aiptek->ifnum, buffer, size, 5000);
+}
+
+/***********************************************************************
+ * Send a command to the tablet.
+ */
+static int
+aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+ const int sizeof_buf = 3 * sizeof(u8);
+ int ret;
+ u8 *buf;
+
+ buf = kmalloc(sizeof_buf, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = 2;
+ buf[1] = command;
+ buf[2] = data;
+
+ if ((ret =
+ aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+ dev_dbg(&aiptek->intf->dev,
+ "aiptek_program: failed, tried to send: 0x%02x 0x%02x\n",
+ command, data);
+ }
+ kfree(buf);
+ return ret < 0 ? ret : 0;
+}
+
+/***********************************************************************
+ * Retrieve information from the tablet. Querying info is defined as first
+ * sending the {command,data} sequence as a command, followed by a wait
+ * (aka, "programmaticDelay") and then a "read" request.
+ */
+static int
+aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+ const int sizeof_buf = 3 * sizeof(u8);
+ int ret;
+ u8 *buf;
+
+ buf = kmalloc(sizeof_buf, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = 2;
+ buf[1] = command;
+ buf[2] = data;
+
+ if (aiptek_command(aiptek, command, data) != 0) {
+ kfree(buf);
+ return -EIO;
+ }
+ msleep(aiptek->curSetting.programmableDelay);
+
+ if ((ret =
+ aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+ dev_dbg(&aiptek->intf->dev,
+ "aiptek_query failed: returned 0x%02x 0x%02x 0x%02x\n",
+ buf[0], buf[1], buf[2]);
+ ret = -EIO;
+ } else {
+ ret = get_unaligned_le16(buf + 1);
+ }
+ kfree(buf);
+ return ret;
+}
+
+/***********************************************************************
+ * Program the tablet into either absolute or relative mode.
+ * We also get information about the tablet's size.
+ */
+static int aiptek_program_tablet(struct aiptek *aiptek)
+{
+ int ret;
+ /* Execute Resolution500LPI */
+ if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0)
+ return ret;
+
+ /* Query getModelCode */
+ if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0)
+ return ret;
+ aiptek->features.modelCode = ret & 0xff;
+
+ /* Query getODMCode */
+ if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0)
+ return ret;
+ aiptek->features.odmCode = ret;
+
+ /* Query getFirmwareCode */
+ if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0)
+ return ret;
+ aiptek->features.firmwareCode = ret;
+
+ /* Query getXextension */
+ if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
+ return ret;
+ input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0);
+
+ /* Query getYextension */
+ if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
+ return ret;
+ input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0);
+
+ /* Query getPressureLevels */
+ if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
+ return ret;
+ input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0);
+
+ /* Depending on whether we are in absolute or relative mode, we will
+ * do a switchToTablet(absolute) or switchToMouse(relative) command.
+ */
+ if (aiptek->curSetting.coordinateMode ==
+ AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+ /* Execute switchToTablet */
+ if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) {
+ return ret;
+ }
+ } else {
+ /* Execute switchToMouse */
+ if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) {
+ return ret;
+ }
+ }
+
+ /* Enable the macro keys */
+ if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0)
+ return ret;
+#if 0
+ /* Execute FilterOn */
+ if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0)
+ return ret;
+#endif
+
+ /* Execute AutoGainOn */
+ if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0)
+ return ret;
+
+ /* Reset the eventCount, so we track events from last (re)programming
+ */
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA;
+ aiptek->eventCount = 0;
+
+ return 0;
+}
+
+/***********************************************************************
+ * Sysfs functions. Sysfs prefers that individually-tunable parameters
+ * exist in their separate pseudo-files. Summary data that is immutable
+ * may exist in a singular file so long as you don't define a writeable
+ * interface.
+ */
+
+/***********************************************************************
+ * support the 'size' file -- display support
+ */
+static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%dx%d\n",
+ input_abs_get_max(aiptek->inputdev, ABS_X) + 1,
+ input_abs_get_max(aiptek->inputdev, ABS_Y) + 1);
+}
+
+/* These structs define the sysfs files, param #1 is the name of the
+ * file, param 2 is the file permissions, param 3 & 4 are to the
+ * output generator and input parser routines. Absence of a routine is
+ * permitted -- it only means can't either 'cat' the file, or send data
+ * to it.
+ */
+static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
+
+/***********************************************************************
+ * support routines for the 'pointer_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static struct aiptek_map pointer_mode_map[] = {
+ { "stylus", AIPTEK_POINTER_ONLY_STYLUS_MODE },
+ { "mouse", AIPTEK_POINTER_ONLY_MOUSE_MODE },
+ { "either", AIPTEK_POINTER_EITHER_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(pointer_mode_map,
+ aiptek->curSetting.pointerMode));
+}
+
+static ssize_t
+store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_mode = map_str_to_val(pointer_mode_map, buf, count);
+
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.pointerMode = new_mode;
+ return count;
+}
+
+static DEVICE_ATTR(pointer_mode,
+ S_IRUGO | S_IWUSR,
+ show_tabletPointerMode, store_tabletPointerMode);
+
+/***********************************************************************
+ * support routines for the 'coordinate_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+
+static struct aiptek_map coordinate_mode_map[] = {
+ { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE },
+ { "relative", AIPTEK_COORDINATE_RELATIVE_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(coordinate_mode_map,
+ aiptek->curSetting.coordinateMode));
+}
+
+static ssize_t
+store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_mode = map_str_to_val(coordinate_mode_map, buf, count);
+
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.coordinateMode = new_mode;
+ return count;
+}
+
+static DEVICE_ATTR(coordinate_mode,
+ S_IRUGO | S_IWUSR,
+ show_tabletCoordinateMode, store_tabletCoordinateMode);
+
+/***********************************************************************
+ * support routines for the 'tool_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+
+static struct aiptek_map tool_mode_map[] = {
+ { "mouse", AIPTEK_TOOL_BUTTON_MOUSE_MODE },
+ { "eraser", AIPTEK_TOOL_BUTTON_ERASER_MODE },
+ { "pencil", AIPTEK_TOOL_BUTTON_PENCIL_MODE },
+ { "pen", AIPTEK_TOOL_BUTTON_PEN_MODE },
+ { "brush", AIPTEK_TOOL_BUTTON_BRUSH_MODE },
+ { "airbrush", AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE },
+ { "lens", AIPTEK_TOOL_BUTTON_LENS_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(tool_mode_map,
+ aiptek->curSetting.toolMode));
+}
+
+static ssize_t
+store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_mode = map_str_to_val(tool_mode_map, buf, count);
+
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.toolMode = new_mode;
+ return count;
+}
+
+static DEVICE_ATTR(tool_mode,
+ S_IRUGO | S_IWUSR,
+ show_tabletToolMode, store_tabletToolMode);
+
+/***********************************************************************
+ * support routines for the 'xtilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
+ return snprintf(buf, PAGE_SIZE, "disable\n");
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.xTilt);
+ }
+}
+
+static ssize_t
+store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int x;
+
+ if (kstrtoint(buf, 10, &x)) {
+ size_t len = buf[count - 1] == '\n' ? count - 1 : count;
+
+ if (strncmp(buf, "disable", len))
+ return -EINVAL;
+
+ aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
+ } else {
+ if (x < AIPTEK_TILT_MIN || x > AIPTEK_TILT_MAX)
+ return -EINVAL;
+
+ aiptek->newSetting.xTilt = x;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(xtilt,
+ S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt);
+
+/***********************************************************************
+ * support routines for the 'ytilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
+ return snprintf(buf, PAGE_SIZE, "disable\n");
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.yTilt);
+ }
+}
+
+static ssize_t
+store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int y;
+
+ if (kstrtoint(buf, 10, &y)) {
+ size_t len = buf[count - 1] == '\n' ? count - 1 : count;
+
+ if (strncmp(buf, "disable", len))
+ return -EINVAL;
+
+ aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
+ } else {
+ if (y < AIPTEK_TILT_MIN || y > AIPTEK_TILT_MAX)
+ return -EINVAL;
+
+ aiptek->newSetting.yTilt = y;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(ytilt,
+ S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt);
+
+/***********************************************************************
+ * support routines for the 'jitter' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay);
+}
+
+static ssize_t
+store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int err, j;
+
+ err = kstrtoint(buf, 10, &j);
+ if (err)
+ return err;
+
+ aiptek->newSetting.jitterDelay = j;
+ return count;
+}
+
+static DEVICE_ATTR(jitter,
+ S_IRUGO | S_IWUSR,
+ show_tabletJitterDelay, store_tabletJitterDelay);
+
+/***********************************************************************
+ * support routines for the 'delay' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.programmableDelay);
+}
+
+static ssize_t
+store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int err, d;
+
+ err = kstrtoint(buf, 10, &d);
+ if (err)
+ return err;
+
+ aiptek->newSetting.programmableDelay = d;
+ return count;
+}
+
+static DEVICE_ATTR(delay,
+ S_IRUGO | S_IWUSR,
+ show_tabletProgrammableDelay, store_tabletProgrammableDelay);
+
+/***********************************************************************
+ * support routines for the 'event_count' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount);
+}
+
+static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL);
+
+/***********************************************************************
+ * support routines for the 'diagnostic' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ char *retMsg;
+
+ switch (aiptek->diagnostic) {
+ case AIPTEK_DIAGNOSTIC_NA:
+ retMsg = "no errors\n";
+ break;
+
+ case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE:
+ retMsg = "Error: receiving relative reports\n";
+ break;
+
+ case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE:
+ retMsg = "Error: receiving absolute reports\n";
+ break;
+
+ case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED:
+ if (aiptek->curSetting.pointerMode ==
+ AIPTEK_POINTER_ONLY_MOUSE_MODE) {
+ retMsg = "Error: receiving stylus reports\n";
+ } else {
+ retMsg = "Error: receiving mouse reports\n";
+ }
+ break;
+
+ default:
+ return 0;
+ }
+ return snprintf(buf, PAGE_SIZE, retMsg);
+}
+
+static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL);
+
+/***********************************************************************
+ * support routines for the 'stylus_upper' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static struct aiptek_map stylus_button_map[] = {
+ { "upper", AIPTEK_STYLUS_UPPER_BUTTON },
+ { "lower", AIPTEK_STYLUS_LOWER_BUTTON },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(stylus_button_map,
+ aiptek->curSetting.stylusButtonUpper));
+}
+
+static ssize_t
+store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(stylus_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.stylusButtonUpper = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(stylus_upper,
+ S_IRUGO | S_IWUSR,
+ show_tabletStylusUpper, store_tabletStylusUpper);
+
+/***********************************************************************
+ * support routines for the 'stylus_lower' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(stylus_button_map,
+ aiptek->curSetting.stylusButtonLower));
+}
+
+static ssize_t
+store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(stylus_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.stylusButtonLower = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(stylus_lower,
+ S_IRUGO | S_IWUSR,
+ show_tabletStylusLower, store_tabletStylusLower);
+
+/***********************************************************************
+ * support routines for the 'mouse_left' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static struct aiptek_map mouse_button_map[] = {
+ { "left", AIPTEK_MOUSE_LEFT_BUTTON },
+ { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON },
+ { "right", AIPTEK_MOUSE_RIGHT_BUTTON },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonLeft));
+}
+
+static ssize_t
+store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.mouseButtonLeft = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(mouse_left,
+ S_IRUGO | S_IWUSR,
+ show_tabletMouseLeft, store_tabletMouseLeft);
+
+/***********************************************************************
+ * support routines for the 'mouse_middle' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonMiddle));
+}
+
+static ssize_t
+store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.mouseButtonMiddle = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(mouse_middle,
+ S_IRUGO | S_IWUSR,
+ show_tabletMouseMiddle, store_tabletMouseMiddle);
+
+/***********************************************************************
+ * support routines for the 'mouse_right' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonRight));
+}
+
+static ssize_t
+store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.mouseButtonRight = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(mouse_right,
+ S_IRUGO | S_IWUSR,
+ show_tabletMouseRight, store_tabletMouseRight);
+
+/***********************************************************************
+ * support routines for the 'wheel' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
+ return snprintf(buf, PAGE_SIZE, "disable\n");
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.wheel);
+ }
+}
+
+static ssize_t
+store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int err, w;
+
+ err = kstrtoint(buf, 10, &w);
+ if (err)
+ return err;
+
+ aiptek->newSetting.wheel = w;
+ return count;
+}
+
+static DEVICE_ATTR(wheel,
+ S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel);
+
+/***********************************************************************
+ * support routines for the 'execute' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ /* There is nothing useful to display, so a one-line manual
+ * is in order...
+ */
+ return snprintf(buf, PAGE_SIZE,
+ "Write anything to this file to program your tablet.\n");
+}
+
+static ssize_t
+store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ /* We do not care what you write to this file. Merely the action
+ * of writing to this file triggers a tablet reprogramming.
+ */
+ memcpy(&aiptek->curSetting, &aiptek->newSetting,
+ sizeof(struct aiptek_settings));
+
+ if (aiptek_program_tablet(aiptek) < 0)
+ return -EIO;
+
+ return count;
+}
+
+static DEVICE_ATTR(execute,
+ S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute);
+
+/***********************************************************************
+ * support routines for the 'odm_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode);
+}
+
+static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'model_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode);
+}
+
+static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'firmware_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%04x\n",
+ aiptek->features.firmwareCode);
+}
+
+static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
+
+static struct attribute *aiptek_attributes[] = {
+ &dev_attr_size.attr,
+ &dev_attr_pointer_mode.attr,
+ &dev_attr_coordinate_mode.attr,
+ &dev_attr_tool_mode.attr,
+ &dev_attr_xtilt.attr,
+ &dev_attr_ytilt.attr,
+ &dev_attr_jitter.attr,
+ &dev_attr_delay.attr,
+ &dev_attr_event_count.attr,
+ &dev_attr_diagnostic.attr,
+ &dev_attr_odm_code.attr,
+ &dev_attr_model_code.attr,
+ &dev_attr_firmware_code.attr,
+ &dev_attr_stylus_lower.attr,
+ &dev_attr_stylus_upper.attr,
+ &dev_attr_mouse_left.attr,
+ &dev_attr_mouse_middle.attr,
+ &dev_attr_mouse_right.attr,
+ &dev_attr_wheel.attr,
+ &dev_attr_execute.attr,
+ NULL
+};
+
+static struct attribute_group aiptek_attribute_group = {
+ .attrs = aiptek_attributes,
+};
+
+/***********************************************************************
+ * This routine is called when a tablet has been identified. It basically
+ * sets up the tablet and the driver's internal structures.
+ */
+static int
+aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct aiptek *aiptek;
+ struct input_dev *inputdev;
+ int i;
+ int speeds[] = { 0,
+ AIPTEK_PROGRAMMABLE_DELAY_50,
+ AIPTEK_PROGRAMMABLE_DELAY_400,
+ AIPTEK_PROGRAMMABLE_DELAY_25,
+ AIPTEK_PROGRAMMABLE_DELAY_100,
+ AIPTEK_PROGRAMMABLE_DELAY_200,
+ AIPTEK_PROGRAMMABLE_DELAY_300
+ };
+ int err = -ENOMEM;
+
+ /* programmableDelay is where the command-line specified
+ * delay is kept. We make it the first element of speeds[],
+ * so therefore, your override speed is tried first, then the
+ * remainder. Note that the default value of 400ms will be tried
+ * if you do not specify any command line parameter.
+ */
+ speeds[0] = programmableDelay;
+
+ aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
+ inputdev = input_allocate_device();
+ if (!aiptek || !inputdev) {
+ dev_warn(&intf->dev,
+ "cannot allocate memory or input device\n");
+ goto fail1;
+ }
+
+ aiptek->data = usb_alloc_coherent(usbdev, AIPTEK_PACKET_LENGTH,
+ GFP_ATOMIC, &aiptek->data_dma);
+ if (!aiptek->data) {
+ dev_warn(&intf->dev, "cannot allocate usb buffer\n");
+ goto fail1;
+ }
+
+ aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!aiptek->urb) {
+ dev_warn(&intf->dev, "cannot allocate urb\n");
+ goto fail2;
+ }
+
+ aiptek->inputdev = inputdev;
+ aiptek->usbdev = usbdev;
+ aiptek->intf = intf;
+ aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+ aiptek->inDelay = 0;
+ aiptek->endDelay = 0;
+ aiptek->previousJitterable = 0;
+ aiptek->lastMacro = -1;
+
+ /* Set up the curSettings struct. Said struct contains the current
+ * programmable parameters. The newSetting struct contains changes
+ * the user makes to the settings via the sysfs interface. Those
+ * changes are not "committed" to curSettings until the user
+ * writes to the sysfs/.../execute file.
+ */
+ aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
+ aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE;
+ aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
+ aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE;
+ aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE;
+ aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
+ aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON;
+ aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
+ aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON;
+ aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON;
+ aiptek->curSetting.jitterDelay = jitterDelay;
+ aiptek->curSetting.programmableDelay = programmableDelay;
+
+ /* Both structs should have equivalent settings
+ */
+ aiptek->newSetting = aiptek->curSetting;
+
+ /* Determine the usb devices' physical path.
+ * Asketh not why we always pretend we're using "../input0",
+ * but I suspect this will have to be refactored one
+ * day if a single USB device can be a keyboard & a mouse
+ * & a tablet, and the inputX number actually will tell
+ * us something...
+ */
+ usb_make_path(usbdev, aiptek->features.usbPath,
+ sizeof(aiptek->features.usbPath));
+ strlcat(aiptek->features.usbPath, "/input0",
+ sizeof(aiptek->features.usbPath));
+
+ /* Set up client data, pointers to open and close routines
+ * for the input device.
+ */
+ inputdev->name = "Aiptek";
+ inputdev->phys = aiptek->features.usbPath;
+ usb_to_input_id(usbdev, &inputdev->id);
+ inputdev->dev.parent = &intf->dev;
+
+ input_set_drvdata(inputdev, aiptek);
+
+ inputdev->open = aiptek_open;
+ inputdev->close = aiptek_close;
+
+ /* Now program the capacities of the tablet, in terms of being
+ * an input device.
+ */
+ for (i = 0; i < ARRAY_SIZE(eventTypes); ++i)
+ __set_bit(eventTypes[i], inputdev->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(absEvents); ++i)
+ __set_bit(absEvents[i], inputdev->absbit);
+
+ for (i = 0; i < ARRAY_SIZE(relEvents); ++i)
+ __set_bit(relEvents[i], inputdev->relbit);
+
+ __set_bit(MSC_SERIAL, inputdev->mscbit);
+
+ /* Set up key and button codes */
+ for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i)
+ __set_bit(buttonEvents[i], inputdev->keybit);
+
+ for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
+ __set_bit(macroKeyEvents[i], inputdev->keybit);
+
+ /*
+ * Program the input device coordinate capacities. We do not yet
+ * know what maximum X, Y, and Z values are, so we're putting fake
+ * values in. Later, we'll ask the tablet to put in the correct
+ * values.
+ */
+ input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
+ input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
+ input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
+
+ endpoint = &intf->altsetting[0].endpoint[0].desc;
+
+ /* Go set up our URB, which is called when the tablet receives
+ * input.
+ */
+ usb_fill_int_urb(aiptek->urb,
+ aiptek->usbdev,
+ usb_rcvintpipe(aiptek->usbdev,
+ endpoint->bEndpointAddress),
+ aiptek->data, 8, aiptek_irq, aiptek,
+ endpoint->bInterval);
+
+ aiptek->urb->transfer_dma = aiptek->data_dma;
+ aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* Program the tablet. This sets the tablet up in the mode
+ * specified in newSetting, and also queries the tablet's
+ * physical capacities.
+ *
+ * Sanity check: if a tablet doesn't like the slow programmatic
+ * delay, we often get sizes of 0x0. Let's use that as an indicator
+ * to try faster delays, up to 25 ms. If that logic fails, well, you'll
+ * have to explain to us how your tablet thinks it's 0x0, and yet that's
+ * not an error :-)
+ */
+
+ for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
+ aiptek->curSetting.programmableDelay = speeds[i];
+ (void)aiptek_program_tablet(aiptek);
+ if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) {
+ dev_info(&intf->dev,
+ "Aiptek using %d ms programming speed\n",
+ aiptek->curSetting.programmableDelay);
+ break;
+ }
+ }
+
+ /* Murphy says that some day someone will have a tablet that fails the
+ above test. That's you, Frederic Rodrigo */
+ if (i == ARRAY_SIZE(speeds)) {
+ dev_info(&intf->dev,
+ "Aiptek tried all speeds, no sane response\n");
+ goto fail3;
+ }
+
+ /* Associate this driver's struct with the usb interface.
+ */
+ usb_set_intfdata(intf, aiptek);
+
+ /* Set up the sysfs files
+ */
+ err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group);
+ if (err) {
+ dev_warn(&intf->dev, "cannot create sysfs group err: %d\n",
+ err);
+ goto fail3;
+ }
+
+ /* Register the tablet as an Input Device
+ */
+ err = input_register_device(aiptek->inputdev);
+ if (err) {
+ dev_warn(&intf->dev,
+ "input_register_device returned err: %d\n", err);
+ goto fail4;
+ }
+ return 0;
+
+ fail4: sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+ fail3: usb_free_urb(aiptek->urb);
+ fail2: usb_free_coherent(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+ aiptek->data_dma);
+ fail1: usb_set_intfdata(intf, NULL);
+ input_free_device(inputdev);
+ kfree(aiptek);
+ return err;
+}
+
+/***********************************************************************
+ * Deal with tablet disconnecting from the system.
+ */
+static void aiptek_disconnect(struct usb_interface *intf)
+{
+ struct aiptek *aiptek = usb_get_intfdata(intf);
+
+ /* Disassociate driver's struct with usb interface
+ */
+ usb_set_intfdata(intf, NULL);
+ if (aiptek != NULL) {
+ /* Free & unhook everything from the system.
+ */
+ usb_kill_urb(aiptek->urb);
+ input_unregister_device(aiptek->inputdev);
+ sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+ usb_free_urb(aiptek->urb);
+ usb_free_coherent(interface_to_usbdev(intf),
+ AIPTEK_PACKET_LENGTH,
+ aiptek->data, aiptek->data_dma);
+ kfree(aiptek);
+ }
+}
+
+static struct usb_driver aiptek_driver = {
+ .name = "aiptek",
+ .probe = aiptek_probe,
+ .disconnect = aiptek_disconnect,
+ .id_table = aiptek_ids,
+};
+
+module_usb_driver(aiptek_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(programmableDelay, int, 0);
+MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming");
+module_param(jitterDelay, int, 0);
+MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay");