summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r--drivers/input/touchscreen/Kconfig68
-rw-r--r--drivers/input/touchscreen/Makefile6
-rw-r--r--drivers/input/touchscreen/ad7877.c1
-rw-r--r--drivers/input/touchscreen/ad7879-spi.c1
-rw-r--r--drivers/input/touchscreen/ads7846.c5
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c34
-rw-r--r--drivers/input/touchscreen/auo-pixcir-ts.c7
-rw-r--r--drivers/input/touchscreen/cyttsp4_i2c.c5
-rw-r--r--drivers/input/touchscreen/cyttsp4_spi.c1
-rw-r--r--drivers/input/touchscreen/cyttsp_spi.c1
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c246
-rw-r--r--drivers/input/touchscreen/egalax_ts_serial.c194
-rw-r--r--drivers/input/touchscreen/elants_i2c.c21
-rw-r--r--drivers/input/touchscreen/ft6236.c326
-rw-r--r--drivers/input/touchscreen/goodix.c513
-rw-r--r--drivers/input/touchscreen/pcap_ts.c2
-rw-r--r--drivers/input/touchscreen/pixcir_i2c_ts.c53
-rw-r--r--drivers/input/touchscreen/rohm_bu21023.c1218
-rw-r--r--drivers/input/touchscreen/sur40.c20
-rw-r--r--drivers/input/touchscreen/ti_am335x_tsc.c2
-rw-r--r--drivers/input/touchscreen/tps6507x-ts.c9
-rw-r--r--drivers/input/touchscreen/ts4800-ts.c216
-rw-r--r--drivers/input/touchscreen/tsc2004.c83
-rw-r--r--drivers/input/touchscreen/tsc2005.c715
-rw-r--r--drivers/input/touchscreen/tsc200x-core.c665
-rw-r--r--drivers/input/touchscreen/tsc200x-core.h78
-rw-r--r--drivers/input/touchscreen/wacom_w8001.c325
-rw-r--r--drivers/input/touchscreen/zforce_ts.c7
28 files changed, 3750 insertions, 1072 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index deb14c12a..53a97b379 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -295,6 +295,29 @@ config TOUCHSCREEN_EGALAX
To compile this driver as a module, choose M here: the
module will be called egalax_ts.
+config TOUCHSCREEN_EGALAX_SERIAL
+ tristate "EETI eGalax serial touchscreen"
+ select SERIO
+ help
+ Say Y here to enable support for serial connected EETI
+ eGalax touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called egalax_ts_serial.
+
+config TOUCHSCREEN_FT6236
+ tristate "FT6236 I2C touchscreen"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y here to enable support for the I2C connected FT6x06 and
+ FT6x36 family of capacitive touchscreen drivers.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ft6236.
+
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
@@ -311,6 +334,7 @@ config TOUCHSCREEN_FUJITSU
config TOUCHSCREEN_GOODIX
tristate "Goodix I2C touchscreen"
depends on I2C
+ depends on GPIOLIB
help
Say Y here if you have the Goodix touchscreen (such as one
installed in Onda v975w tablets) connected to your
@@ -914,6 +938,22 @@ config TOUCHSCREEN_TOUCHIT213
To compile this driver as a module, choose M here: the
module will be called touchit213.
+config TOUCHSCREEN_TS4800
+ tristate "TS-4800 touchscreen"
+ depends on HAS_IOMEM && OF
+ select MFD_SYSCON
+ select INPUT_POLLDEV
+ help
+ Say Y here if you have a touchscreen on a TS-4800 board.
+
+ On TS-4800, the touchscreen is not handled directly by Linux but by
+ a companion FPGA.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ts4800_ts.
+
config TOUCHSCREEN_TSC_SERIO
tristate "TSC-10/25/40 serial touchscreen support"
select SERIO
@@ -926,10 +966,27 @@ config TOUCHSCREEN_TSC_SERIO
To compile this driver as a module, choose M here: the
module will be called tsc40.
+config TOUCHSCREEN_TSC200X_CORE
+ tristate
+
+config TOUCHSCREEN_TSC2004
+ tristate "TSC2004 based touchscreens"
+ depends on I2C
+ select REGMAP_I2C
+ select TOUCHSCREEN_TSC200X_CORE
+ help
+ Say Y here if you have a TSC2004 based touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc2004.
+
config TOUCHSCREEN_TSC2005
tristate "TSC2005 based touchscreens"
depends on SPI_MASTER
select REGMAP_SPI
+ select TOUCHSCREEN_TSC200X_CORE
help
Say Y here if you have a TSC2005 based touchscreen.
@@ -1065,4 +1122,15 @@ config TOUCHSCREEN_COLIBRI_VF50
To compile this driver as a module, choose M here: the
module will be called colibri_vf50_ts.
+config TOUCHSCREEN_ROHM_BU21023
+ tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a touchscreen using ROHM BU21023/24.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bu21023_ts.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 1b79cc097..968ff12e3 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -35,6 +35,8 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
+obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o
+obj-$(CONFIG_TOUCHSCREEN_FT6236) += ft6236.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
@@ -67,7 +69,10 @@ obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o
obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o
+obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o
obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
@@ -87,3 +92,4 @@ obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o
+obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index da4e5bb5e..9c250ae78 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -843,7 +843,6 @@ static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume);
static struct spi_driver ad7877_driver = {
.driver = {
.name = "ad7877",
- .owner = THIS_MODULE,
.pm = &ad7877_pm,
},
.probe = ad7877_probe,
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
index 1a7b11435..48033c268 100644
--- a/drivers/input/touchscreen/ad7879-spi.c
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -149,7 +149,6 @@ static int ad7879_spi_remove(struct spi_device *spi)
static struct spi_driver ad7879_spi_driver = {
.driver = {
.name = "ad7879",
- .owner = THIS_MODULE,
.pm = &ad7879_pm_ops,
},
.probe = ad7879_spi_probe,
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 04edc8f71..a61b2153a 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -529,10 +529,8 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
ts->hwmon = hwmon_device_register_with_groups(&spi->dev, spi->modalias,
ts, ads7846_attr_groups);
- if (IS_ERR(ts->hwmon))
- return PTR_ERR(ts->hwmon);
- return 0;
+ return PTR_ERR_OR_ZERO(ts->hwmon);
}
static void ads784x_hwmon_unregister(struct spi_device *spi,
@@ -1500,7 +1498,6 @@ static int ads7846_remove(struct spi_device *spi)
static struct spi_driver ads7846_driver = {
.driver = {
.name = "ads7846",
- .owner = THIS_MODULE,
.pm = &ads7846_pm,
.of_match_table = of_match_ptr(ads7846_dt_ids),
},
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 7ca336ea9..726a83e11 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2486,6 +2486,31 @@ static struct mxt_acpi_platform_data samus_platform_data[] = {
{ }
};
+static unsigned int chromebook_tp_buttons[] = {
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ BTN_LEFT
+};
+
+static struct mxt_acpi_platform_data chromebook_platform_data[] = {
+ {
+ /* Touchpad */
+ .hid = "ATML0000",
+ .pdata = {
+ .t19_num_keys = ARRAY_SIZE(chromebook_tp_buttons),
+ .t19_keymap = chromebook_tp_buttons,
+ },
+ },
+ {
+ /* Touchscreen */
+ .hid = "ATML0001",
+ },
+ { }
+};
+
static const struct dmi_system_id mxt_dmi_table[] = {
{
/* 2015 Google Pixel */
@@ -2496,6 +2521,14 @@ static const struct dmi_system_id mxt_dmi_table[] = {
},
.driver_data = samus_platform_data,
},
+ {
+ /* Other Google Chromebooks */
+ .ident = "Chromebook",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+ },
+ .driver_data = chromebook_platform_data,
+ },
{ }
};
@@ -2700,6 +2733,7 @@ static const struct i2c_device_id mxt_id[] = {
{ "qt602240_ts", 0 },
{ "atmel_mxt_ts", 0 },
{ "atmel_mxt_tp", 0 },
+ { "maxtouch", 0 },
{ "mXT224", 0 },
{ }
};
diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
index 38c06f754..6592fc5d4 100644
--- a/drivers/input/touchscreen/auo-pixcir-ts.c
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -399,13 +399,8 @@ static int auo_pixcir_stop(struct auo_pixcir_ts *ts)
static int auo_pixcir_input_open(struct input_dev *dev)
{
struct auo_pixcir_ts *ts = input_get_drvdata(dev);
- int ret;
-
- ret = auo_pixcir_start(ts);
- if (ret)
- return ret;
- return 0;
+ return auo_pixcir_start(ts);
}
static void auo_pixcir_input_close(struct input_dev *dev)
diff --git a/drivers/input/touchscreen/cyttsp4_i2c.c b/drivers/input/touchscreen/cyttsp4_i2c.c
index a9f95c7d3..564e49002 100644
--- a/drivers/input/touchscreen/cyttsp4_i2c.c
+++ b/drivers/input/touchscreen/cyttsp4_i2c.c
@@ -50,10 +50,7 @@ static int cyttsp4_i2c_probe(struct i2c_client *client,
ts = cyttsp4_probe(&cyttsp4_i2c_bus_ops, &client->dev, client->irq,
CYTTSP4_I2C_DATA_SIZE);
- if (IS_ERR(ts))
- return PTR_ERR(ts);
-
- return 0;
+ return PTR_ERR_OR_ZERO(ts);
}
static int cyttsp4_i2c_remove(struct i2c_client *client)
diff --git a/drivers/input/touchscreen/cyttsp4_spi.c b/drivers/input/touchscreen/cyttsp4_spi.c
index b19434ceb..ec5f7c74f 100644
--- a/drivers/input/touchscreen/cyttsp4_spi.c
+++ b/drivers/input/touchscreen/cyttsp4_spi.c
@@ -185,7 +185,6 @@ static int cyttsp4_spi_remove(struct spi_device *spi)
static struct spi_driver cyttsp4_spi_driver = {
.driver = {
.name = CYTTSP4_SPI_NAME,
- .owner = THIS_MODULE,
.pm = &cyttsp4_pm_ops,
},
.probe = cyttsp4_spi_probe,
diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
index 4728bcb19..bbeeb2488 100644
--- a/drivers/input/touchscreen/cyttsp_spi.c
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -182,7 +182,6 @@ static int cyttsp_spi_remove(struct spi_device *spi)
static struct spi_driver cyttsp_spi_driver = {
.driver = {
.name = CY_SPI_NAME,
- .owner = THIS_MODULE,
.pm = &cyttsp_pm_ops,
},
.probe = cyttsp_spi_probe,
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 48de1e8b3..0b0f8c17f 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/ratelimit.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/i2c.h>
@@ -34,13 +35,10 @@
#include <linux/delay.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
-#include <linux/input/edt-ft5x06.h>
-
-#define MAX_SUPPORT_POINTS 5
+#include <linux/of_device.h>
#define WORK_REGISTER_THRESHOLD 0x00
#define WORK_REGISTER_REPORT_RATE 0x08
@@ -91,9 +89,8 @@ struct edt_ft5x06_ts_data {
u16 num_x;
u16 num_y;
- int reset_pin;
- int irq_pin;
- int wake_pin;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *wake_gpio;
#if defined(CONFIG_DEBUG_FS)
struct dentry *debug_dir;
@@ -107,6 +104,7 @@ struct edt_ft5x06_ts_data {
int gain;
int offset;
int report_rate;
+ int max_support_points;
char name[EDT_NAME_LEN];
@@ -114,6 +112,10 @@ struct edt_ft5x06_ts_data {
enum edt_ver version;
};
+struct edt_i2c_chip_data {
+ int max_support_points;
+};
+
static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
u16 wr_len, u8 *wr_buf,
u16 rd_len, u8 *rd_buf)
@@ -170,9 +172,9 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
struct edt_ft5x06_ts_data *tsdata = dev_id;
struct device *dev = &tsdata->client->dev;
u8 cmd;
- u8 rdbuf[29];
+ u8 rdbuf[63];
int i, type, x, y, id;
- int offset, tplen, datalen;
+ int offset, tplen, datalen, crclen;
int error;
switch (tsdata->version) {
@@ -180,14 +182,14 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
cmd = 0xf9; /* tell the controller to send touch data */
offset = 5; /* where the actual touch data starts */
tplen = 4; /* data comes in so called frames */
- datalen = 26; /* how much bytes to listen for */
+ crclen = 1; /* length of the crc data */
break;
case M09:
- cmd = 0x02;
- offset = 1;
+ cmd = 0x0;
+ offset = 3;
tplen = 6;
- datalen = 29;
+ crclen = 0;
break;
default:
@@ -195,6 +197,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
}
memset(rdbuf, 0, sizeof(rdbuf));
+ datalen = tplen * tsdata->max_support_points + offset + crclen;
error = edt_ft5x06_ts_readwrite(tsdata->client,
sizeof(cmd), &cmd,
@@ -219,7 +222,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
goto out;
}
- for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
+ for (i = 0; i < tsdata->max_support_points; i++) {
u8 *buf = &rdbuf[i * tplen + offset];
bool down;
@@ -752,45 +755,6 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
#endif /* CONFIG_DEBUGFS */
-static int edt_ft5x06_ts_reset(struct i2c_client *client,
- struct edt_ft5x06_ts_data *tsdata)
-{
- int error;
-
- if (gpio_is_valid(tsdata->wake_pin)) {
- error = devm_gpio_request_one(&client->dev,
- tsdata->wake_pin, GPIOF_OUT_INIT_LOW,
- "edt-ft5x06 wake");
- if (error) {
- dev_err(&client->dev,
- "Failed to request GPIO %d as wake pin, error %d\n",
- tsdata->wake_pin, error);
- return error;
- }
-
- msleep(5);
- gpio_set_value(tsdata->wake_pin, 1);
- }
- if (gpio_is_valid(tsdata->reset_pin)) {
- /* this pulls reset down, enabling the low active reset */
- error = devm_gpio_request_one(&client->dev,
- tsdata->reset_pin, GPIOF_OUT_INIT_LOW,
- "edt-ft5x06 reset");
- if (error) {
- dev_err(&client->dev,
- "Failed to request GPIO %d as reset pin, error %d\n",
- tsdata->reset_pin, error);
- return error;
- }
-
- msleep(5);
- gpio_set_value(tsdata->reset_pin, 1);
- msleep(300);
- }
-
- return 0;
-}
-
static int edt_ft5x06_ts_identify(struct i2c_client *client,
struct edt_ft5x06_ts_data *tsdata,
char *fw_version)
@@ -850,44 +814,24 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
return 0;
}
-#define EDT_ATTR_CHECKSET(name, reg) \
-do { \
- if (pdata->name >= edt_ft5x06_attr_##name.limit_low && \
- pdata->name <= edt_ft5x06_attr_##name.limit_high) \
- edt_ft5x06_register_write(tsdata, reg, pdata->name); \
-} while (0)
-
-#define EDT_GET_PROP(name, reg) { \
- u32 val; \
- if (of_property_read_u32(np, #name, &val) == 0) \
- edt_ft5x06_register_write(tsdata, reg, val); \
-}
-
-static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np,
- struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_get_defaults(struct device *dev,
+ struct edt_ft5x06_ts_data *tsdata)
{
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+ u32 val;
+ int error;
- EDT_GET_PROP(threshold, reg_addr->reg_threshold);
- EDT_GET_PROP(gain, reg_addr->reg_gain);
- EDT_GET_PROP(offset, reg_addr->reg_offset);
-}
+ error = device_property_read_u32(dev, "threshold", &val);
+ if (!error)
+ reg_addr->reg_threshold = val;
-static void
-edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata,
- const struct edt_ft5x06_platform_data *pdata)
-{
- struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
-
- if (!pdata->use_parameters)
- return;
+ error = device_property_read_u32(dev, "gain", &val);
+ if (!error)
+ reg_addr->reg_gain = val;
- /* pick up defaults from the platform data */
- EDT_ATTR_CHECKSET(threshold, reg_addr->reg_threshold);
- EDT_ATTR_CHECKSET(gain, reg_addr->reg_gain);
- EDT_ATTR_CHECKSET(offset, reg_addr->reg_offset);
- if (reg_addr->reg_report_rate != NO_REGISTER)
- EDT_ATTR_CHECKSET(report_rate, reg_addr->reg_report_rate);
+ error = device_property_read_u32(dev, "offset", &val);
+ if (!error)
+ reg_addr->reg_offset = val;
}
static void
@@ -931,37 +875,13 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
}
}
-#ifdef CONFIG_OF
-static int edt_ft5x06_i2c_ts_probe_dt(struct device *dev,
- struct edt_ft5x06_ts_data *tsdata)
-{
- struct device_node *np = dev->of_node;
-
- /*
- * irq_pin is not needed for DT setup.
- * irq is associated via 'interrupts' property in DT
- */
- tsdata->irq_pin = -EINVAL;
- tsdata->reset_pin = of_get_named_gpio(np, "reset-gpios", 0);
- tsdata->wake_pin = of_get_named_gpio(np, "wake-gpios", 0);
-
- return 0;
-}
-#else
-static inline int edt_ft5x06_i2c_ts_probe_dt(struct device *dev,
- struct edt_ft5x06_ts_data *tsdata)
-{
- return -ENODEV;
-}
-#endif
-
static int edt_ft5x06_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct edt_ft5x06_platform_data *pdata =
- dev_get_platdata(&client->dev);
+ const struct edt_i2c_chip_data *chip_data;
struct edt_ft5x06_ts_data *tsdata;
struct input_dev *input;
+ unsigned long irq_flags;
int error;
char fw_version[EDT_NAME_LEN];
@@ -973,32 +893,43 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
return -ENOMEM;
}
- if (!pdata) {
- error = edt_ft5x06_i2c_ts_probe_dt(&client->dev, tsdata);
- if (error) {
- dev_err(&client->dev,
- "DT probe failed and no platform data present\n");
- return error;
- }
- } else {
- tsdata->reset_pin = pdata->reset_pin;
- tsdata->irq_pin = pdata->irq_pin;
- tsdata->wake_pin = -EINVAL;
+ chip_data = of_device_get_match_data(&client->dev);
+ if (!chip_data)
+ chip_data = (const struct edt_i2c_chip_data *)id->driver_data;
+ if (!chip_data || !chip_data->max_support_points) {
+ dev_err(&client->dev, "invalid or missing chip data\n");
+ return -EINVAL;
}
- error = edt_ft5x06_ts_reset(client, tsdata);
- if (error)
+ tsdata->max_support_points = chip_data->max_support_points;
+
+ tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
+ "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(tsdata->reset_gpio)) {
+ error = PTR_ERR(tsdata->reset_gpio);
+ dev_err(&client->dev,
+ "Failed to request GPIO reset pin, error %d\n", error);
+ return error;
+ }
+
+ tsdata->wake_gpio = devm_gpiod_get_optional(&client->dev,
+ "wake", GPIOD_OUT_LOW);
+ if (IS_ERR(tsdata->wake_gpio)) {
+ error = PTR_ERR(tsdata->wake_gpio);
+ dev_err(&client->dev,
+ "Failed to request GPIO wake pin, error %d\n", error);
return error;
+ }
- if (gpio_is_valid(tsdata->irq_pin)) {
- error = devm_gpio_request_one(&client->dev, tsdata->irq_pin,
- GPIOF_IN, "edt-ft5x06 irq");
- if (error) {
- dev_err(&client->dev,
- "Failed to request GPIO %d, error %d\n",
- tsdata->irq_pin, error);
- return error;
- }
+ if (tsdata->wake_gpio) {
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(tsdata->wake_gpio, 1);
+ }
+
+ if (tsdata->reset_gpio) {
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(tsdata->reset_gpio, 0);
+ msleep(300);
}
input = devm_input_allocate_device(&client->dev);
@@ -1019,12 +950,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
}
edt_ft5x06_ts_set_regs(tsdata);
-
- if (!pdata)
- edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata);
- else
- edt_ft5x06_ts_get_defaults(tsdata, pdata);
-
+ edt_ft5x06_ts_get_defaults(&client->dev, tsdata);
edt_ft5x06_ts_get_parameters(tsdata);
dev_dbg(&client->dev,
@@ -1040,10 +966,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
input_set_abs_params(input, ABS_MT_POSITION_Y,
0, tsdata->num_y * 64 - 1, 0, 0);
- if (!pdata)
- touchscreen_parse_properties(input, true);
+ touchscreen_parse_properties(input, true);
- error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, INPUT_MT_DIRECT);
+ error = input_mt_init_slots(input, tsdata->max_support_points,
+ INPUT_MT_DIRECT);
if (error) {
dev_err(&client->dev, "Unable to init MT slots.\n");
return error;
@@ -1052,9 +978,13 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
input_set_drvdata(input, tsdata);
i2c_set_clientdata(client, tsdata);
- error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
- edt_ft5x06_ts_isr,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ irq_flags = irq_get_trigger_type(client->irq);
+ if (irq_flags == IRQF_TRIGGER_NONE)
+ irq_flags = IRQF_TRIGGER_FALLING;
+ irq_flags |= IRQF_ONESHOT;
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, edt_ft5x06_ts_isr, irq_flags,
client->name, tsdata);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
@@ -1074,7 +1004,9 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
dev_dbg(&client->dev,
"EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n",
- client->irq, tsdata->wake_pin, tsdata->reset_pin);
+ client->irq,
+ tsdata->wake_gpio ? desc_to_gpio(tsdata->wake_gpio) : -1,
+ tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1);
return 0;
@@ -1116,17 +1048,27 @@ static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
+static const struct edt_i2c_chip_data edt_ft5x06_data = {
+ .max_support_points = 5,
+};
+
+static const struct edt_i2c_chip_data edt_ft5506_data = {
+ .max_support_points = 10,
+};
+
static const struct i2c_device_id edt_ft5x06_ts_id[] = {
- { "edt-ft5x06", 0, },
+ { .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
+ { .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
#ifdef CONFIG_OF
static const struct of_device_id edt_ft5x06_of_match[] = {
- { .compatible = "edt,edt-ft5206", },
- { .compatible = "edt,edt-ft5306", },
- { .compatible = "edt,edt-ft5406", },
+ { .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data },
+ { .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
+ { .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
+ { .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);
diff --git a/drivers/input/touchscreen/egalax_ts_serial.c b/drivers/input/touchscreen/egalax_ts_serial.c
new file mode 100644
index 000000000..657bbae60
--- /dev/null
+++ b/drivers/input/touchscreen/egalax_ts_serial.c
@@ -0,0 +1,194 @@
+/*
+ * EETI Egalax serial touchscreen driver
+ *
+ * Copyright (c) 2015 Zoltán Böszörményi <zboszor@pr.hu>
+ *
+ * based on the
+ *
+ * Hampshire serial touchscreen driver (Copyright (c) 2010 Adam Bennett)
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC "EETI Egalax serial touchscreen driver"
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define EGALAX_FORMAT_MAX_LENGTH 6
+#define EGALAX_FORMAT_START_BIT BIT(7)
+#define EGALAX_FORMAT_PRESSURE_BIT BIT(6)
+#define EGALAX_FORMAT_TOUCH_BIT BIT(0)
+#define EGALAX_FORMAT_RESOLUTION_MASK 0x06
+
+#define EGALAX_MIN_XC 0
+#define EGALAX_MAX_XC 0x4000
+#define EGALAX_MIN_YC 0
+#define EGALAX_MAX_YC 0x4000
+
+/*
+ * Per-touchscreen data.
+ */
+struct egalax {
+ struct input_dev *input;
+ struct serio *serio;
+ int idx;
+ u8 data[EGALAX_FORMAT_MAX_LENGTH];
+ char phys[32];
+};
+
+static void egalax_process_data(struct egalax *egalax)
+{
+ struct input_dev *dev = egalax->input;
+ u8 *data = egalax->data;
+ u16 x, y;
+ u8 shift;
+ u8 mask;
+
+ shift = 3 - ((data[0] & EGALAX_FORMAT_RESOLUTION_MASK) >> 1);
+ mask = 0xff >> (shift + 1);
+
+ x = (((u16)(data[1] & mask) << 7) | (data[2] & 0x7f)) << shift;
+ y = (((u16)(data[3] & mask) << 7) | (data[4] & 0x7f)) << shift;
+
+ input_report_key(dev, BTN_TOUCH, data[0] & EGALAX_FORMAT_TOUCH_BIT);
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ input_sync(dev);
+}
+
+static irqreturn_t egalax_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags)
+{
+ struct egalax *egalax = serio_get_drvdata(serio);
+ int pkt_len;
+
+ egalax->data[egalax->idx++] = data;
+
+ if (likely(egalax->data[0] & EGALAX_FORMAT_START_BIT)) {
+ pkt_len = egalax->data[0] & EGALAX_FORMAT_PRESSURE_BIT ? 6 : 5;
+ if (pkt_len == egalax->idx) {
+ egalax_process_data(egalax);
+ egalax->idx = 0;
+ }
+ } else {
+ dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+ egalax->data[0]);
+ egalax->idx = 0;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * egalax_connect() is the routine that is called when someone adds a
+ * new serio device that supports egalax protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+static int egalax_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct egalax *egalax;
+ struct input_dev *input_dev;
+ int error;
+
+ egalax = kzalloc(sizeof(struct egalax), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!egalax || !input_dev) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ egalax->serio = serio;
+ egalax->input = input_dev;
+ snprintf(egalax->phys, sizeof(egalax->phys),
+ "%s/input0", serio->phys);
+
+ input_dev->name = "EETI eGalaxTouch Serial TouchScreen";
+ input_dev->phys = egalax->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_EGALAX;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0001;
+ input_dev->dev.parent = &serio->dev;
+
+ input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X,
+ EGALAX_MIN_XC, EGALAX_MAX_XC, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ EGALAX_MIN_YC, EGALAX_MAX_YC, 0, 0);
+
+ serio_set_drvdata(serio, egalax);
+
+ error = serio_open(serio, drv);
+ if (error)
+ goto err_reset_drvdata;
+
+ error = input_register_device(input_dev);
+ if (error)
+ goto err_close_serio;
+
+ return 0;
+
+err_close_serio:
+ serio_close(serio);
+err_reset_drvdata:
+ serio_set_drvdata(serio, NULL);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(egalax);
+ return error;
+}
+
+static void egalax_disconnect(struct serio *serio)
+{
+ struct egalax *egalax = serio_get_drvdata(serio);
+
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_unregister_device(egalax->input);
+ kfree(egalax);
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static const struct serio_device_id egalax_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_EGALAX,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, egalax_serio_ids);
+
+static struct serio_driver egalax_drv = {
+ .driver = {
+ .name = "egalax",
+ },
+ .description = DRIVER_DESC,
+ .id_table = egalax_serio_ids,
+ .interrupt = egalax_interrupt,
+ .connect = egalax_connect,
+ .disconnect = egalax_disconnect,
+};
+module_serio_driver(egalax_drv);
+
+MODULE_AUTHOR("Zoltán Böszörményi <zboszor@pr.hu>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 64b816d79..b1291f56e 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1316,7 +1316,13 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
disable_irq(client->irq);
- if (device_may_wakeup(dev) || ts->keep_power_in_suspend) {
+ if (device_may_wakeup(dev)) {
+ /*
+ * The device will automatically enter idle mode
+ * that has reduced power consumption.
+ */
+ ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
+ } else if (ts->keep_power_in_suspend) {
for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
error = elants_i2c_send(client, set_sleep_cmd,
sizeof(set_sleep_cmd));
@@ -1326,10 +1332,6 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
dev_err(&client->dev,
"suspend command failed: %d\n", error);
}
-
- if (device_may_wakeup(dev))
- ts->wake_irq_enabled =
- (enable_irq_wake(client->irq) == 0);
} else {
elants_i2c_power_off(ts);
}
@@ -1345,10 +1347,11 @@ static int __maybe_unused elants_i2c_resume(struct device *dev)
int retry_cnt;
int error;
- if (device_may_wakeup(dev) && ts->wake_irq_enabled)
- disable_irq_wake(client->irq);
-
- if (ts->keep_power_in_suspend) {
+ if (device_may_wakeup(dev)) {
+ if (ts->wake_irq_enabled)
+ disable_irq_wake(client->irq);
+ elants_i2c_sw_reset(client);
+ } else if (ts->keep_power_in_suspend) {
for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
error = elants_i2c_send(client, set_active_cmd,
sizeof(set_active_cmd));
diff --git a/drivers/input/touchscreen/ft6236.c b/drivers/input/touchscreen/ft6236.c
new file mode 100644
index 000000000..d240d2e21
--- /dev/null
+++ b/drivers/input/touchscreen/ft6236.c
@@ -0,0 +1,326 @@
+/*
+ * FocalTech FT6236 TouchScreen driver.
+ *
+ * Copyright (c) 2010 Focal tech Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/property.h>
+
+#define FT6236_MAX_TOUCH_POINTS 2
+
+#define FT6236_REG_TH_GROUP 0x80
+#define FT6236_REG_PERIODACTIVE 0x88
+#define FT6236_REG_LIB_VER_H 0xa1
+#define FT6236_REG_LIB_VER_L 0xa2
+#define FT6236_REG_CIPHER 0xa3
+#define FT6236_REG_FIRMID 0xa6
+#define FT6236_REG_FOCALTECH_ID 0xa8
+#define FT6236_REG_RELEASE_CODE_ID 0xaf
+
+#define FT6236_EVENT_PRESS_DOWN 0
+#define FT6236_EVENT_LIFT_UP 1
+#define FT6236_EVENT_CONTACT 2
+#define FT6236_EVENT_NO_EVENT 3
+
+struct ft6236_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct gpio_desc *reset_gpio;
+ u32 max_x;
+ u32 max_y;
+ bool invert_x;
+ bool invert_y;
+ bool swap_xy;
+};
+
+/*
+ * This struct is a touchpoint as stored in hardware. Note that the id,
+ * as well as the event, are stored in the upper nybble of the hi byte.
+ */
+struct ft6236_touchpoint {
+ union {
+ u8 xhi;
+ u8 event;
+ };
+ u8 xlo;
+ union {
+ u8 yhi;
+ u8 id;
+ };
+ u8 ylo;
+ u8 weight;
+ u8 misc;
+} __packed;
+
+/* This packet represents the register map as read from offset 0 */
+struct ft6236_packet {
+ u8 dev_mode;
+ u8 gest_id;
+ u8 touches;
+ struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS];
+} __packed;
+
+static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data)
+{
+ int error;
+
+ error = i2c_smbus_read_i2c_block_data(client, reg, len, data);
+ if (error < 0)
+ return error;
+
+ if (error != len)
+ return -EIO;
+
+ return 0;
+}
+
+static irqreturn_t ft6236_interrupt(int irq, void *dev_id)
+{
+ struct ft6236_data *ft6236 = dev_id;
+ struct device *dev = &ft6236->client->dev;
+ struct input_dev *input = ft6236->input;
+ struct ft6236_packet buf;
+ u8 touches;
+ int i, error;
+
+ error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf);
+ if (error) {
+ dev_err(dev, "read touchdata failed %d\n", error);
+ return IRQ_HANDLED;
+ }
+
+ touches = buf.touches & 0xf;
+ if (touches > FT6236_MAX_TOUCH_POINTS) {
+ dev_dbg(dev,
+ "%d touch points reported, only %d are supported\n",
+ touches, FT6236_MAX_TOUCH_POINTS);
+ touches = FT6236_MAX_TOUCH_POINTS;
+ }
+
+ for (i = 0; i < touches; i++) {
+ struct ft6236_touchpoint *point = &buf.points[i];
+ u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo;
+ u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo;
+ u8 event = point->event >> 6;
+ u8 id = point->id >> 4;
+ bool act = (event == FT6236_EVENT_PRESS_DOWN ||
+ event == FT6236_EVENT_CONTACT);
+
+ input_mt_slot(input, id);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, act);
+ if (!act)
+ continue;
+
+ if (ft6236->invert_x)
+ x = ft6236->max_x - x;
+
+ if (ft6236->invert_y)
+ y = ft6236->max_y - y;
+
+ if (ft6236->swap_xy) {
+ input_report_abs(input, ABS_MT_POSITION_X, y);
+ input_report_abs(input, ABS_MT_POSITION_Y, x);
+ } else {
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+ }
+ }
+
+ input_mt_sync_frame(input);
+ input_sync(input);
+
+ return IRQ_HANDLED;
+}
+
+static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg)
+{
+ struct i2c_client *client = ft6236->client;
+ u8 val = 0;
+ int error;
+
+ error = ft6236_read(client, reg, 1, &val);
+ if (error)
+ dev_dbg(&client->dev,
+ "error reading register 0x%02x: %d\n", reg, error);
+
+ return val;
+}
+
+static void ft6236_debug_info(struct ft6236_data *ft6236)
+{
+ struct device *dev = &ft6236->client->dev;
+
+ dev_dbg(dev, "Touch threshold is %d\n",
+ ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4);
+ dev_dbg(dev, "Report rate is %dHz\n",
+ ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10);
+ dev_dbg(dev, "Firmware library version 0x%02x%02x\n",
+ ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H),
+ ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L));
+ dev_dbg(dev, "Firmware version 0x%02x\n",
+ ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID));
+ dev_dbg(dev, "Chip vendor ID 0x%02x\n",
+ ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER));
+ dev_dbg(dev, "CTPM vendor ID 0x%02x\n",
+ ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID));
+ dev_dbg(dev, "Release code version 0x%02x\n",
+ ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID));
+}
+
+static void ft6236_reset(struct ft6236_data *ft6236)
+{
+ if (!ft6236->reset_gpio)
+ return;
+
+ gpiod_set_value_cansleep(ft6236->reset_gpio, 1);
+ usleep_range(5000, 20000);
+ gpiod_set_value_cansleep(ft6236->reset_gpio, 0);
+ msleep(300);
+}
+
+static int ft6236_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct ft6236_data *ft6236;
+ struct input_dev *input;
+ u32 fuzz_x = 0, fuzz_y = 0;
+ u8 val;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENXIO;
+
+ if (!client->irq) {
+ dev_err(dev, "irq is missing\n");
+ return -EINVAL;
+ }
+
+ ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL);
+ if (!ft6236)
+ return -ENOMEM;
+
+ ft6236->client = client;
+ ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ft6236->reset_gpio)) {
+ error = PTR_ERR(ft6236->reset_gpio);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "error getting reset gpio: %d\n", error);
+ return error;
+ }
+
+ ft6236_reset(ft6236);
+
+ /* verify that the controller is present */
+ error = ft6236_read(client, 0x00, 1, &val);
+ if (error) {
+ dev_err(dev, "failed to read from controller: %d\n", error);
+ return error;
+ }
+
+ ft6236_debug_info(ft6236);
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ ft6236->input = input;
+ input->name = client->name;
+ input->id.bustype = BUS_I2C;
+
+ if (device_property_read_u32(dev, "touchscreen-size-x",
+ &ft6236->max_x) ||
+ device_property_read_u32(dev, "touchscreen-size-y",
+ &ft6236->max_y)) {
+ dev_err(dev, "touchscreen-size-x and/or -y missing\n");
+ return -EINVAL;
+ }
+
+ device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x);
+ device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y);
+ ft6236->invert_x = device_property_read_bool(dev,
+ "touchscreen-inverted-x");
+ ft6236->invert_y = device_property_read_bool(dev,
+ "touchscreen-inverted-y");
+ ft6236->swap_xy = device_property_read_bool(dev,
+ "touchscreen-swapped-x-y");
+
+ if (ft6236->swap_xy) {
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+ ft6236->max_y, fuzz_y, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+ ft6236->max_x, fuzz_x, 0);
+ } else {
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+ ft6236->max_x, fuzz_x, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+ ft6236->max_y, fuzz_y, 0);
+ }
+
+ error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(dev, client->irq, NULL,
+ ft6236_interrupt, IRQF_ONESHOT,
+ client->name, ft6236);
+ if (error) {
+ dev_err(dev, "request irq %d failed: %d\n", client->irq, error);
+ return error;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(dev, "failed to register input device: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ft6236_of_match[] = {
+ { .compatible = "focaltech,ft6236", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ft6236_of_match);
+#endif
+
+static const struct i2c_device_id ft6236_id[] = {
+ { "ft6236", },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ft6236_id);
+
+static struct i2c_driver ft6236_driver = {
+ .driver = {
+ .name = "ft6236",
+ .of_match_table = of_match_ptr(ft6236_of_match),
+ },
+ .probe = ft6236_probe,
+ .id_table = ft6236_id,
+};
+module_i2c_driver(ft6236_driver);
+
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_AUTHOR("Noralf Trønnes <noralf@tronnes.org>");
+MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 4d113c9e4..240b16f3e 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -2,6 +2,7 @@
* Driver for Goodix Touchscreens
*
* Copyright (c) 2014 Red Hat Inc.
+ * Copyright (c) 2015 K. Merker <merker@debian.org>
*
* This code is based on gt9xx.c authored by andrew@goodix.com:
*
@@ -16,6 +17,8 @@
#include <linux/kernel.h>
#include <linux/dmi.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
@@ -33,11 +36,24 @@ struct goodix_ts_data {
struct input_dev *input_dev;
int abs_x_max;
int abs_y_max;
+ bool swapped_x_y;
+ bool inverted_x;
+ bool inverted_y;
unsigned int max_touch_num;
unsigned int int_trigger_type;
- bool rotated_screen;
+ int cfg_len;
+ struct gpio_desc *gpiod_int;
+ struct gpio_desc *gpiod_rst;
+ u16 id;
+ u16 version;
+ const char *cfg_name;
+ struct completion firmware_loading_complete;
+ unsigned long irq_flags;
};
+#define GOODIX_GPIO_INT_NAME "irq"
+#define GOODIX_GPIO_RST_NAME "reset"
+
#define GOODIX_MAX_HEIGHT 4096
#define GOODIX_MAX_WIDTH 4096
#define GOODIX_INT_TRIGGER 1
@@ -45,8 +61,13 @@ struct goodix_ts_data {
#define GOODIX_MAX_CONTACTS 10
#define GOODIX_CONFIG_MAX_LENGTH 240
+#define GOODIX_CONFIG_911_LENGTH 186
+#define GOODIX_CONFIG_967_LENGTH 228
/* Register defines */
+#define GOODIX_REG_COMMAND 0x8040
+#define GOODIX_CMD_SCREEN_OFF 0x05
+
#define GOODIX_READ_COOR_ADDR 0x814E
#define GOODIX_REG_CONFIG_DATA 0x8047
#define GOODIX_REG_ID 0x8140
@@ -115,6 +136,63 @@ static int goodix_i2c_read(struct i2c_client *client,
return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0);
}
+/**
+ * goodix_i2c_write - write data to a register of the i2c slave device.
+ *
+ * @client: i2c device.
+ * @reg: the register to write to.
+ * @buf: raw data buffer to write.
+ * @len: length of the buffer to write
+ */
+static int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf,
+ unsigned len)
+{
+ u8 *addr_buf;
+ struct i2c_msg msg;
+ int ret;
+
+ addr_buf = kmalloc(len + 2, GFP_KERNEL);
+ if (!addr_buf)
+ return -ENOMEM;
+
+ addr_buf[0] = reg >> 8;
+ addr_buf[1] = reg & 0xFF;
+ memcpy(&addr_buf[2], buf, len);
+
+ msg.flags = 0;
+ msg.addr = client->addr;
+ msg.buf = addr_buf;
+ msg.len = len + 2;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ kfree(addr_buf);
+ return ret < 0 ? ret : (ret != 1 ? -EIO : 0);
+}
+
+static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value)
+{
+ return goodix_i2c_write(client, reg, &value, sizeof(value));
+}
+
+static int goodix_get_cfg_len(u16 id)
+{
+ switch (id) {
+ case 911:
+ case 9271:
+ case 9110:
+ case 927:
+ case 928:
+ return GOODIX_CONFIG_911_LENGTH;
+
+ case 912:
+ case 967:
+ return GOODIX_CONFIG_967_LENGTH;
+
+ default:
+ return GOODIX_CONFIG_MAX_LENGTH;
+ }
+}
+
static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
{
int touch_num;
@@ -155,10 +233,13 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
int input_y = get_unaligned_le16(&coor_data[3]);
int input_w = get_unaligned_le16(&coor_data[5]);
- if (ts->rotated_screen) {
+ /* Inversions have to happen before axis swapping */
+ if (ts->inverted_x)
input_x = ts->abs_x_max - input_x;
+ if (ts->inverted_y)
input_y = ts->abs_y_max - input_y;
- }
+ if (ts->swapped_x_y)
+ swap(input_x, input_y);
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
@@ -202,21 +283,195 @@ static void goodix_process_events(struct goodix_ts_data *ts)
*/
static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
{
- static const u8 end_cmd[] = {
- GOODIX_READ_COOR_ADDR >> 8,
- GOODIX_READ_COOR_ADDR & 0xff,
- 0
- };
struct goodix_ts_data *ts = dev_id;
goodix_process_events(ts);
- if (i2c_master_send(ts->client, end_cmd, sizeof(end_cmd)) < 0)
+ if (goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0) < 0)
dev_err(&ts->client->dev, "I2C write end_cmd error\n");
return IRQ_HANDLED;
}
+static void goodix_free_irq(struct goodix_ts_data *ts)
+{
+ devm_free_irq(&ts->client->dev, ts->client->irq, ts);
+}
+
+static int goodix_request_irq(struct goodix_ts_data *ts)
+{
+ return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
+ NULL, goodix_ts_irq_handler,
+ ts->irq_flags, ts->client->name, ts);
+}
+
+/**
+ * goodix_check_cfg - Checks if config fw is valid
+ *
+ * @ts: goodix_ts_data pointer
+ * @cfg: firmware config data
+ */
+static int goodix_check_cfg(struct goodix_ts_data *ts,
+ const struct firmware *cfg)
+{
+ int i, raw_cfg_len;
+ u8 check_sum = 0;
+
+ if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) {
+ dev_err(&ts->client->dev,
+ "The length of the config fw is not correct");
+ return -EINVAL;
+ }
+
+ raw_cfg_len = cfg->size - 2;
+ for (i = 0; i < raw_cfg_len; i++)
+ check_sum += cfg->data[i];
+ check_sum = (~check_sum) + 1;
+ if (check_sum != cfg->data[raw_cfg_len]) {
+ dev_err(&ts->client->dev,
+ "The checksum of the config fw is not correct");
+ return -EINVAL;
+ }
+
+ if (cfg->data[raw_cfg_len + 1] != 1) {
+ dev_err(&ts->client->dev,
+ "Config fw must have Config_Fresh register set");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * goodix_send_cfg - Write fw config to device
+ *
+ * @ts: goodix_ts_data pointer
+ * @cfg: config firmware to write to device
+ */
+static int goodix_send_cfg(struct goodix_ts_data *ts,
+ const struct firmware *cfg)
+{
+ int error;
+
+ error = goodix_check_cfg(ts, cfg);
+ if (error)
+ return error;
+
+ error = goodix_i2c_write(ts->client, GOODIX_REG_CONFIG_DATA, cfg->data,
+ cfg->size);
+ if (error) {
+ dev_err(&ts->client->dev, "Failed to write config data: %d",
+ error);
+ return error;
+ }
+ dev_dbg(&ts->client->dev, "Config sent successfully.");
+
+ /* Let the firmware reconfigure itself, so sleep for 10ms */
+ usleep_range(10000, 11000);
+
+ return 0;
+}
+
+static int goodix_int_sync(struct goodix_ts_data *ts)
+{
+ int error;
+
+ error = gpiod_direction_output(ts->gpiod_int, 0);
+ if (error)
+ return error;
+
+ msleep(50); /* T5: 50ms */
+
+ error = gpiod_direction_input(ts->gpiod_int);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+/**
+ * goodix_reset - Reset device during power on
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_reset(struct goodix_ts_data *ts)
+{
+ int error;
+
+ /* begin select I2C slave addr */
+ error = gpiod_direction_output(ts->gpiod_rst, 0);
+ if (error)
+ return error;
+
+ msleep(20); /* T2: > 10ms */
+
+ /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
+ error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14);
+ if (error)
+ return error;
+
+ usleep_range(100, 2000); /* T3: > 100us */
+
+ error = gpiod_direction_output(ts->gpiod_rst, 1);
+ if (error)
+ return error;
+
+ usleep_range(6000, 10000); /* T4: > 5ms */
+
+ /* end select I2C slave addr */
+ error = gpiod_direction_input(ts->gpiod_rst);
+ if (error)
+ return error;
+
+ error = goodix_int_sync(ts);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+/**
+ * goodix_get_gpio_config - Get GPIO config from ACPI/DT
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_get_gpio_config(struct goodix_ts_data *ts)
+{
+ int error;
+ struct device *dev;
+ struct gpio_desc *gpiod;
+
+ if (!ts->client)
+ return -EINVAL;
+ dev = &ts->client->dev;
+
+ /* Get the interrupt GPIO pin number */
+ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
+ if (IS_ERR(gpiod)) {
+ error = PTR_ERR(gpiod);
+ if (error != -EPROBE_DEFER)
+ dev_dbg(dev, "Failed to get %s GPIO: %d\n",
+ GOODIX_GPIO_INT_NAME, error);
+ return error;
+ }
+
+ ts->gpiod_int = gpiod;
+
+ /* Get the reset line GPIO pin number */
+ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN);
+ if (IS_ERR(gpiod)) {
+ error = PTR_ERR(gpiod);
+ if (error != -EPROBE_DEFER)
+ dev_dbg(dev, "Failed to get %s GPIO: %d\n",
+ GOODIX_GPIO_RST_NAME, error);
+ return error;
+ }
+
+ ts->gpiod_rst = gpiod;
+
+ return 0;
+}
+
/**
* goodix_read_config - Read the embedded configuration of the panel
*
@@ -230,14 +485,15 @@ static void goodix_read_config(struct goodix_ts_data *ts)
int error;
error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA,
- config,
- GOODIX_CONFIG_MAX_LENGTH);
+ config, ts->cfg_len);
if (error) {
dev_warn(&ts->client->dev,
"Error reading config (%d), using defaults\n",
error);
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->int_trigger_type = GOODIX_INT_TRIGGER;
ts->max_touch_num = GOODIX_MAX_CONTACTS;
return;
@@ -245,6 +501,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
@@ -252,42 +510,45 @@ static void goodix_read_config(struct goodix_ts_data *ts)
"Invalid config, using defaults\n");
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->max_touch_num = GOODIX_MAX_CONTACTS;
}
- ts->rotated_screen = dmi_check_system(rotated_screen);
- if (ts->rotated_screen)
+ if (dmi_check_system(rotated_screen)) {
+ ts->inverted_x = true;
+ ts->inverted_y = true;
dev_dbg(&ts->client->dev,
"Applying '180 degrees rotated screen' quirk\n");
+ }
}
/**
* goodix_read_version - Read goodix touchscreen version
*
- * @client: the i2c client
- * @version: output buffer containing the version on success
- * @id: output buffer containing the id on success
+ * @ts: our goodix_ts_data pointer
*/
-static int goodix_read_version(struct i2c_client *client, u16 *version, u16 *id)
+static int goodix_read_version(struct goodix_ts_data *ts)
{
int error;
u8 buf[6];
char id_str[5];
- error = goodix_i2c_read(client, GOODIX_REG_ID, buf, sizeof(buf));
+ error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf));
if (error) {
- dev_err(&client->dev, "read version failed: %d\n", error);
+ dev_err(&ts->client->dev, "read version failed: %d\n", error);
return error;
}
memcpy(id_str, buf, 4);
id_str[4] = 0;
- if (kstrtou16(id_str, 10, id))
- *id = 0x1001;
+ if (kstrtou16(id_str, 10, &ts->id))
+ ts->id = 0x1001;
- *version = get_unaligned_le16(&buf[4]);
+ ts->version = get_unaligned_le16(&buf[4]);
- dev_info(&client->dev, "ID %d, version: %04x\n", *id, *version);
+ dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id,
+ ts->version);
return 0;
}
@@ -321,13 +582,10 @@ static int goodix_i2c_test(struct i2c_client *client)
* goodix_request_input_dev - Allocate, populate and register the input device
*
* @ts: our goodix_ts_data pointer
- * @version: device firmware version
- * @id: device ID
*
* Must be called during probe
*/
-static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version,
- u16 id)
+static int goodix_request_input_dev(struct goodix_ts_data *ts)
{
int error;
@@ -351,8 +609,8 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version,
ts->input_dev->phys = "input/ts";
ts->input_dev->id.bustype = BUS_I2C;
ts->input_dev->id.vendor = 0x0416;
- ts->input_dev->id.product = id;
- ts->input_dev->id.version = version;
+ ts->input_dev->id.product = ts->id;
+ ts->input_dev->id.version = ts->version;
error = input_register_device(ts->input_dev);
if (error) {
@@ -364,13 +622,75 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version,
return 0;
}
+/**
+ * goodix_configure_dev - Finish device initialization
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Must be called from probe to finish initialization of the device.
+ * Contains the common initialization code for both devices that
+ * declare gpio pins and devices that do not. It is either called
+ * directly from probe or from request_firmware_wait callback.
+ */
+static int goodix_configure_dev(struct goodix_ts_data *ts)
+{
+ int error;
+
+ ts->swapped_x_y = device_property_read_bool(&ts->client->dev,
+ "touchscreen-swapped-x-y");
+ ts->inverted_x = device_property_read_bool(&ts->client->dev,
+ "touchscreen-inverted-x");
+ ts->inverted_y = device_property_read_bool(&ts->client->dev,
+ "touchscreen-inverted-y");
+
+ goodix_read_config(ts);
+
+ error = goodix_request_input_dev(ts);
+ if (error)
+ return error;
+
+ ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
+ error = goodix_request_irq(ts);
+ if (error) {
+ dev_err(&ts->client->dev, "request IRQ failed: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+/**
+ * goodix_config_cb - Callback to finish device init
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * request_firmware_wait callback that finishes
+ * initialization of the device.
+ */
+static void goodix_config_cb(const struct firmware *cfg, void *ctx)
+{
+ struct goodix_ts_data *ts = ctx;
+ int error;
+
+ if (cfg) {
+ /* send device configuration to the firmware */
+ error = goodix_send_cfg(ts, cfg);
+ if (error)
+ goto err_release_cfg;
+ }
+
+ goodix_configure_dev(ts);
+
+err_release_cfg:
+ release_firmware(cfg);
+ complete_all(&ts->firmware_loading_complete);
+}
+
static int goodix_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct goodix_ts_data *ts;
- unsigned long irq_flags;
int error;
- u16 version_info, id_info;
dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
@@ -385,6 +705,20 @@ static int goodix_ts_probe(struct i2c_client *client,
ts->client = client;
i2c_set_clientdata(client, ts);
+ init_completion(&ts->firmware_loading_complete);
+
+ error = goodix_get_gpio_config(ts);
+ if (error)
+ return error;
+
+ if (ts->gpiod_int && ts->gpiod_rst) {
+ /* reset the controller */
+ error = goodix_reset(ts);
+ if (error) {
+ dev_err(&client->dev, "Controller reset failed.\n");
+ return error;
+ }
+ }
error = goodix_i2c_test(client);
if (error) {
@@ -392,30 +726,125 @@ static int goodix_ts_probe(struct i2c_client *client,
return error;
}
- error = goodix_read_version(client, &version_info, &id_info);
+ error = goodix_read_version(ts);
if (error) {
dev_err(&client->dev, "Read version failed.\n");
return error;
}
- goodix_read_config(ts);
+ ts->cfg_len = goodix_get_cfg_len(ts->id);
+
+ if (ts->gpiod_int && ts->gpiod_rst) {
+ /* update device config */
+ ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL,
+ "goodix_%d_cfg.bin", ts->id);
+ if (!ts->cfg_name)
+ return -ENOMEM;
+
+ error = request_firmware_nowait(THIS_MODULE, true, ts->cfg_name,
+ &client->dev, GFP_KERNEL, ts,
+ goodix_config_cb);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to invoke firmware loader: %d\n",
+ error);
+ return error;
+ }
- error = goodix_request_input_dev(ts, version_info, id_info);
- if (error)
- return error;
+ return 0;
+ } else {
+ error = goodix_configure_dev(ts);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static int goodix_ts_remove(struct i2c_client *client)
+{
+ struct goodix_ts_data *ts = i2c_get_clientdata(client);
+
+ if (ts->gpiod_int && ts->gpiod_rst)
+ wait_for_completion(&ts->firmware_loading_complete);
+
+ return 0;
+}
+
+static int __maybe_unused goodix_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct goodix_ts_data *ts = i2c_get_clientdata(client);
+ int error;
- irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
- error = devm_request_threaded_irq(&ts->client->dev, client->irq,
- NULL, goodix_ts_irq_handler,
- irq_flags, client->name, ts);
+ /* We need gpio pins to suspend/resume */
+ if (!ts->gpiod_int || !ts->gpiod_rst)
+ return 0;
+
+ wait_for_completion(&ts->firmware_loading_complete);
+
+ /* Free IRQ as IRQ pin is used as output in the suspend sequence */
+ goodix_free_irq(ts);
+
+ /* Output LOW on the INT pin for 5 ms */
+ error = gpiod_direction_output(ts->gpiod_int, 0);
if (error) {
- dev_err(&client->dev, "request IRQ failed: %d\n", error);
+ goodix_request_irq(ts);
return error;
}
+ usleep_range(5000, 6000);
+
+ error = goodix_i2c_write_u8(ts->client, GOODIX_REG_COMMAND,
+ GOODIX_CMD_SCREEN_OFF);
+ if (error) {
+ dev_err(&ts->client->dev, "Screen off command failed\n");
+ gpiod_direction_input(ts->gpiod_int);
+ goodix_request_irq(ts);
+ return -EAGAIN;
+ }
+
+ /*
+ * The datasheet specifies that the interval between sending screen-off
+ * command and wake-up should be longer than 58 ms. To avoid waking up
+ * sooner, delay 58ms here.
+ */
+ msleep(58);
+ return 0;
+}
+
+static int __maybe_unused goodix_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct goodix_ts_data *ts = i2c_get_clientdata(client);
+ int error;
+
+ if (!ts->gpiod_int || !ts->gpiod_rst)
+ return 0;
+
+ /*
+ * Exit sleep mode by outputting HIGH level to INT pin
+ * for 2ms~5ms.
+ */
+ error = gpiod_direction_output(ts->gpiod_int, 1);
+ if (error)
+ return error;
+
+ usleep_range(2000, 5000);
+
+ error = goodix_int_sync(ts);
+ if (error)
+ return error;
+
+ error = goodix_request_irq(ts);
+ if (error)
+ return error;
+
return 0;
}
+static SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume);
+
static const struct i2c_device_id goodix_ts_id[] = {
{ "GDIX1001:00", 0 },
{ }
@@ -446,11 +875,13 @@ MODULE_DEVICE_TABLE(of, goodix_of_match);
static struct i2c_driver goodix_ts_driver = {
.probe = goodix_ts_probe,
+ .remove = goodix_ts_remove,
.id_table = goodix_ts_id,
.driver = {
.name = "Goodix-TS",
.acpi_match_table = ACPI_PTR(goodix_acpi_match),
.of_match_table = of_match_ptr(goodix_of_match),
+ .pm = &goodix_pm_ops,
},
};
module_i2c_driver(goodix_ts_driver);
diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
index 23a354a39..0e3fc419a 100644
--- a/drivers/input/touchscreen/pcap_ts.c
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -87,7 +87,7 @@ static void pcap_ts_read_xy(void *data, u16 res[2])
static void pcap_ts_work(struct work_struct *work)
{
- struct delayed_work *dw = container_of(work, struct delayed_work, work);
+ struct delayed_work *dw = to_delayed_work(work);
struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work);
u8 ch[2];
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 91621725b..09523a3d3 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data {
struct input_dev *input;
struct gpio_desc *gpio_attb;
struct gpio_desc *gpio_reset;
+ struct gpio_desc *gpio_enable;
+ struct gpio_desc *gpio_wake;
const struct pixcir_i2c_chip_data *chip;
int max_fingers; /* Max fingers supported in this instance */
bool running;
@@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
struct device *dev = &ts->client->dev;
int ret;
+ if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) {
+ if (ts->gpio_wake)
+ gpiod_set_value_cansleep(ts->gpio_wake, 1);
+ }
+
ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
if (ret < 0) {
dev_err(dev, "%s: can't read reg 0x%x : %d\n",
@@ -228,6 +235,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
return ret;
}
+ if (mode == PIXCIR_POWER_HALT) {
+ if (ts->gpio_wake)
+ gpiod_set_value_cansleep(ts->gpio_wake, 0);
+ }
+
return 0;
}
@@ -302,6 +314,11 @@ static int pixcir_start(struct pixcir_i2c_ts_data *ts)
struct device *dev = &ts->client->dev;
int error;
+ if (ts->gpio_enable) {
+ gpiod_set_value_cansleep(ts->gpio_enable, 1);
+ msleep(100);
+ }
+
/* LEVEL_TOUCH interrupt with active low polarity */
error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
if (error) {
@@ -343,6 +360,9 @@ static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
/* Wait till running ISR is complete */
synchronize_irq(ts->client->irq);
+ if (ts->gpio_enable)
+ gpiod_set_value_cansleep(ts->gpio_enable, 0);
+
return 0;
}
@@ -377,8 +397,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
goto unlock;
}
}
-
- enable_irq_wake(client->irq);
} else if (input->users) {
ret = pixcir_stop(ts);
}
@@ -399,7 +417,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
mutex_lock(&input->mutex);
if (device_may_wakeup(&client->dev)) {
- disable_irq_wake(client->irq);
if (!input->users) {
ret = pixcir_stop(ts);
@@ -537,6 +554,27 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
return error;
}
+ tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(tsdata->gpio_wake)) {
+ error = PTR_ERR(tsdata->gpio_wake);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get wake gpio: %d\n", error);
+ return error;
+ }
+
+ tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(tsdata->gpio_enable)) {
+ error = PTR_ERR(tsdata->gpio_enable);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get enable gpio: %d\n", error);
+ return error;
+ }
+
+ if (tsdata->gpio_enable)
+ msleep(100);
+
error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, tsdata);
@@ -564,14 +602,6 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
return error;
i2c_set_clientdata(client, tsdata);
- device_init_wakeup(&client->dev, 1);
-
- return 0;
-}
-
-static int pixcir_i2c_ts_remove(struct i2c_client *client)
-{
- device_init_wakeup(&client->dev, 0);
return 0;
}
@@ -609,7 +639,6 @@ static struct i2c_driver pixcir_i2c_ts_driver = {
.of_match_table = of_match_ptr(pixcir_of_match),
},
.probe = pixcir_i2c_ts_probe,
- .remove = pixcir_i2c_ts_remove,
.id_table = pixcir_i2c_ts_id,
};
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
new file mode 100644
index 000000000..210640d00
--- /dev/null
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -0,0 +1,1218 @@
+/*
+ * ROHM BU21023/24 Dual touch support resistive touch screen driver
+ * Copyright (C) 2012 ROHM CO.,LTD.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define BU21023_NAME "bu21023_ts"
+#define BU21023_FIRMWARE_NAME "/*(DEBLOBBED)*/"
+
+#define MAX_CONTACTS 2
+
+#define AXIS_ADJUST 4
+#define AXIS_OFFSET 8
+
+#define FIRMWARE_BLOCK_SIZE 32U
+#define FIRMWARE_RETRY_MAX 4
+
+#define SAMPLING_DELAY 12 /* msec */
+
+#define CALIBRATION_RETRY_MAX 6
+
+#define ROHM_TS_ABS_X_MIN 40
+#define ROHM_TS_ABS_X_MAX 990
+#define ROHM_TS_ABS_Y_MIN 160
+#define ROHM_TS_ABS_Y_MAX 920
+#define ROHM_TS_DISPLACEMENT_MAX 0 /* zero for infinite */
+
+/*
+ * BU21023GUL/BU21023MUV/BU21024FV-M registers map
+ */
+#define VADOUT_YP_H 0x00
+#define VADOUT_YP_L 0x01
+#define VADOUT_XP_H 0x02
+#define VADOUT_XP_L 0x03
+#define VADOUT_YN_H 0x04
+#define VADOUT_YN_L 0x05
+#define VADOUT_XN_H 0x06
+#define VADOUT_XN_L 0x07
+
+#define PRM1_X_H 0x08
+#define PRM1_X_L 0x09
+#define PRM1_Y_H 0x0a
+#define PRM1_Y_L 0x0b
+#define PRM2_X_H 0x0c
+#define PRM2_X_L 0x0d
+#define PRM2_Y_H 0x0e
+#define PRM2_Y_L 0x0f
+
+#define MLT_PRM_MONI_X 0x10
+#define MLT_PRM_MONI_Y 0x11
+
+#define DEBUG_MONI_1 0x12
+#define DEBUG_MONI_2 0x13
+
+#define VADOUT_ZX_H 0x14
+#define VADOUT_ZX_L 0x15
+#define VADOUT_ZY_H 0x16
+#define VADOUT_ZY_L 0x17
+
+#define Z_PARAM_H 0x18
+#define Z_PARAM_L 0x19
+
+/*
+ * Value for VADOUT_*_L
+ */
+#define VADOUT_L_MASK 0x01
+
+/*
+ * Value for PRM*_*_L
+ */
+#define PRM_L_MASK 0x01
+
+#define POS_X1_H 0x20
+#define POS_X1_L 0x21
+#define POS_Y1_H 0x22
+#define POS_Y1_L 0x23
+#define POS_X2_H 0x24
+#define POS_X2_L 0x25
+#define POS_Y2_H 0x26
+#define POS_Y2_L 0x27
+
+/*
+ * Value for POS_*_L
+ */
+#define POS_L_MASK 0x01
+
+#define TOUCH 0x28
+#define TOUCH_DETECT 0x01
+
+#define TOUCH_GESTURE 0x29
+#define SINGLE_TOUCH 0x01
+#define DUAL_TOUCH 0x03
+#define TOUCH_MASK 0x03
+#define CALIBRATION_REQUEST 0x04
+#define CALIBRATION_STATUS 0x08
+#define CALIBRATION_MASK 0x0c
+#define GESTURE_SPREAD 0x10
+#define GESTURE_PINCH 0x20
+#define GESTURE_ROTATE_R 0x40
+#define GESTURE_ROTATE_L 0x80
+
+#define INT_STATUS 0x2a
+#define INT_MASK 0x3d
+#define INT_CLEAR 0x3e
+
+/*
+ * Values for INT_*
+ */
+#define COORD_UPDATE 0x01
+#define CALIBRATION_DONE 0x02
+#define SLEEP_IN 0x04
+#define SLEEP_OUT 0x08
+#define PROGRAM_LOAD_DONE 0x10
+#define ERROR 0x80
+#define INT_ALL 0x9f
+
+#define ERR_STATUS 0x2b
+#define ERR_MASK 0x3f
+
+/*
+ * Values for ERR_*
+ */
+#define ADC_TIMEOUT 0x01
+#define CPU_TIMEOUT 0x02
+#define CALIBRATION_ERR 0x04
+#define PROGRAM_LOAD_ERR 0x10
+
+#define COMMON_SETUP1 0x30
+#define PROGRAM_LOAD_HOST 0x02
+#define PROGRAM_LOAD_EEPROM 0x03
+#define CENSOR_4PORT 0x04
+#define CENSOR_8PORT 0x00 /* Not supported by BU21023 */
+#define CALIBRATION_TYPE_DEFAULT 0x08
+#define CALIBRATION_TYPE_SPECIAL 0x00
+#define INT_ACTIVE_HIGH 0x10
+#define INT_ACTIVE_LOW 0x00
+#define AUTO_CALIBRATION 0x40
+#define MANUAL_CALIBRATION 0x00
+#define COMMON_SETUP1_DEFAULT 0x4e
+
+#define COMMON_SETUP2 0x31
+#define MAF_NONE 0x00
+#define MAF_1SAMPLE 0x01
+#define MAF_3SAMPLES 0x02
+#define MAF_5SAMPLES 0x03
+#define INV_Y 0x04
+#define INV_X 0x08
+#define SWAP_XY 0x10
+
+#define COMMON_SETUP3 0x32
+#define EN_SLEEP 0x01
+#define EN_MULTI 0x02
+#define EN_GESTURE 0x04
+#define EN_INTVL 0x08
+#define SEL_STEP 0x10
+#define SEL_MULTI 0x20
+#define SEL_TBL_DEFAULT 0x40
+
+#define INTERVAL_TIME 0x33
+#define INTERVAL_TIME_DEFAULT 0x10
+
+#define STEP_X 0x34
+#define STEP_X_DEFAULT 0x41
+
+#define STEP_Y 0x35
+#define STEP_Y_DEFAULT 0x8d
+
+#define OFFSET_X 0x38
+#define OFFSET_X_DEFAULT 0x0c
+
+#define OFFSET_Y 0x39
+#define OFFSET_Y_DEFAULT 0x0c
+
+#define THRESHOLD_TOUCH 0x3a
+#define THRESHOLD_TOUCH_DEFAULT 0xa0
+
+#define THRESHOLD_GESTURE 0x3b
+#define THRESHOLD_GESTURE_DEFAULT 0x17
+
+#define SYSTEM 0x40
+#define ANALOG_POWER_ON 0x01
+#define ANALOG_POWER_OFF 0x00
+#define CPU_POWER_ON 0x02
+#define CPU_POWER_OFF 0x00
+
+#define FORCE_CALIBRATION 0x42
+#define FORCE_CALIBRATION_ON 0x01
+#define FORCE_CALIBRATION_OFF 0x00
+
+#define CPU_FREQ 0x50 /* 10 / (reg + 1) MHz */
+#define CPU_FREQ_10MHZ 0x00
+#define CPU_FREQ_5MHZ 0x01
+#define CPU_FREQ_1MHZ 0x09
+
+#define EEPROM_ADDR 0x51
+
+#define CALIBRATION_ADJUST 0x52
+#define CALIBRATION_ADJUST_DEFAULT 0x00
+
+#define THRESHOLD_SLEEP_IN 0x53
+
+#define EVR_XY 0x56
+#define EVR_XY_DEFAULT 0x10
+
+#define PRM_SWOFF_TIME 0x57
+#define PRM_SWOFF_TIME_DEFAULT 0x04
+
+#define PROGRAM_VERSION 0x5f
+
+#define ADC_CTRL 0x60
+#define ADC_DIV_MASK 0x1f /* The minimum value is 4 */
+#define ADC_DIV_DEFAULT 0x08
+
+#define ADC_WAIT 0x61
+#define ADC_WAIT_DEFAULT 0x0a
+
+#define SWCONT 0x62
+#define SWCONT_DEFAULT 0x0f
+
+#define EVR_X 0x63
+#define EVR_X_DEFAULT 0x86
+
+#define EVR_Y 0x64
+#define EVR_Y_DEFAULT 0x64
+
+#define TEST1 0x65
+#define DUALTOUCH_STABILIZE_ON 0x01
+#define DUALTOUCH_STABILIZE_OFF 0x00
+#define DUALTOUCH_REG_ON 0x20
+#define DUALTOUCH_REG_OFF 0x00
+
+#define CALIBRATION_REG1 0x68
+#define CALIBRATION_REG1_DEFAULT 0xd9
+
+#define CALIBRATION_REG2 0x69
+#define CALIBRATION_REG2_DEFAULT 0x36
+
+#define CALIBRATION_REG3 0x6a
+#define CALIBRATION_REG3_DEFAULT 0x32
+
+#define EX_ADDR_H 0x70
+#define EX_ADDR_L 0x71
+#define EX_WDAT 0x72
+#define EX_RDAT 0x73
+#define EX_CHK_SUM1 0x74
+#define EX_CHK_SUM2 0x75
+#define EX_CHK_SUM3 0x76
+
+struct rohm_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+
+ bool initialized;
+
+ unsigned int contact_count[MAX_CONTACTS + 1];
+ int finger_count;
+
+ u8 setup2;
+};
+
+/*
+ * rohm_i2c_burst_read - execute combined I2C message for ROHM BU21023/24
+ * @client: Handle to ROHM BU21023/24
+ * @start: Where to start read address from ROHM BU21023/24
+ * @buf: Where to store read data from ROHM BU21023/24
+ * @len: How many bytes to read
+ *
+ * Returns negative errno, else zero on success.
+ *
+ * Note
+ * In BU21023/24 burst read, stop condition is needed after "address write".
+ * Therefore, transmission is performed in 2 steps.
+ */
+static int rohm_i2c_burst_read(struct i2c_client *client, u8 start, void *buf,
+ size_t len)
+{
+ struct i2c_adapter *adap = client->adapter;
+ struct i2c_msg msg[2];
+ int i, ret = 0;
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].len = 1;
+ msg[0].buf = &start;
+
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = len;
+ msg[1].buf = buf;
+
+ i2c_lock_adapter(adap);
+
+ for (i = 0; i < 2; i++) {
+ if (__i2c_transfer(adap, &msg[i], 1) < 0) {
+ ret = -EIO;
+ break;
+ }
+ }
+
+ i2c_unlock_adapter(adap);
+
+ return ret;
+}
+
+static int rohm_ts_manual_calibration(struct rohm_ts_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ struct device *dev = &client->dev;
+ u8 buf[33]; /* for PRM1_X_H(0x08)-TOUCH(0x28) */
+
+ int retry;
+ bool success = false;
+ bool first_time = true;
+ bool calibration_done;
+
+ u8 reg1, reg2, reg3;
+ s32 reg1_orig, reg2_orig, reg3_orig;
+ s32 val;
+
+ int calib_x = 0, calib_y = 0;
+ int reg_x, reg_y;
+ int err_x, err_y;
+
+ int error, error2;
+ int i;
+
+ reg1_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG1);
+ if (reg1_orig < 0)
+ return reg1_orig;
+
+ reg2_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG2);
+ if (reg2_orig < 0)
+ return reg2_orig;
+
+ reg3_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG3);
+ if (reg3_orig < 0)
+ return reg3_orig;
+
+ error = i2c_smbus_write_byte_data(client, INT_MASK,
+ COORD_UPDATE | SLEEP_IN | SLEEP_OUT |
+ PROGRAM_LOAD_DONE);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client, TEST1,
+ DUALTOUCH_STABILIZE_ON);
+ if (error)
+ goto out;
+
+ for (retry = 0; retry < CALIBRATION_RETRY_MAX; retry++) {
+ /* wait 2 sampling for update */
+ mdelay(2 * SAMPLING_DELAY);
+
+#define READ_CALIB_BUF(reg) buf[((reg) - PRM1_X_H)]
+
+ error = rohm_i2c_burst_read(client, PRM1_X_H, buf, sizeof(buf));
+ if (error)
+ goto out;
+
+ if (READ_CALIB_BUF(TOUCH) & TOUCH_DETECT)
+ continue;
+
+ if (first_time) {
+ /* generate calibration parameter */
+ calib_x = ((int)READ_CALIB_BUF(PRM1_X_H) << 2 |
+ READ_CALIB_BUF(PRM1_X_L)) - AXIS_OFFSET;
+ calib_y = ((int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
+ READ_CALIB_BUF(PRM1_Y_L)) - AXIS_OFFSET;
+
+ error = i2c_smbus_write_byte_data(client, TEST1,
+ DUALTOUCH_STABILIZE_ON | DUALTOUCH_REG_ON);
+ if (error)
+ goto out;
+
+ first_time = false;
+ } else {
+ /* generate adjustment parameter */
+ err_x = (int)READ_CALIB_BUF(PRM1_X_H) << 2 |
+ READ_CALIB_BUF(PRM1_X_L);
+ err_y = (int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
+ READ_CALIB_BUF(PRM1_Y_L);
+
+ /* X axis ajust */
+ if (err_x <= 4)
+ calib_x -= AXIS_ADJUST;
+ else if (err_x >= 60)
+ calib_x += AXIS_ADJUST;
+
+ /* Y axis ajust */
+ if (err_y <= 4)
+ calib_y -= AXIS_ADJUST;
+ else if (err_y >= 60)
+ calib_y += AXIS_ADJUST;
+ }
+
+ /* generate calibration setting value */
+ reg_x = calib_x + ((calib_x & 0x200) << 1);
+ reg_y = calib_y + ((calib_y & 0x200) << 1);
+
+ /* convert for register format */
+ reg1 = reg_x >> 3;
+ reg2 = (reg_y & 0x7) << 4 | (reg_x & 0x7);
+ reg3 = reg_y >> 3;
+
+ error = i2c_smbus_write_byte_data(client,
+ CALIBRATION_REG1, reg1);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client,
+ CALIBRATION_REG2, reg2);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client,
+ CALIBRATION_REG3, reg3);
+ if (error)
+ goto out;
+
+ /*
+ * force calibration sequcence
+ */
+ error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+ FORCE_CALIBRATION_OFF);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+ FORCE_CALIBRATION_ON);
+ if (error)
+ goto out;
+
+ /* clear all interrupts */
+ error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+ if (error)
+ goto out;
+
+ /*
+ * Wait for the status change of calibration, max 10 sampling
+ */
+ calibration_done = false;
+
+ for (i = 0; i < 10; i++) {
+ mdelay(SAMPLING_DELAY);
+
+ val = i2c_smbus_read_byte_data(client, TOUCH_GESTURE);
+ if (!(val & CALIBRATION_MASK)) {
+ calibration_done = true;
+ break;
+ } else if (val < 0) {
+ error = val;
+ goto out;
+ }
+ }
+
+ if (calibration_done) {
+ val = i2c_smbus_read_byte_data(client, INT_STATUS);
+ if (val == CALIBRATION_DONE) {
+ success = true;
+ break;
+ } else if (val < 0) {
+ error = val;
+ goto out;
+ }
+ } else {
+ dev_warn(dev, "calibration timeout\n");
+ }
+ }
+
+ if (!success) {
+ error = i2c_smbus_write_byte_data(client, CALIBRATION_REG1,
+ reg1_orig);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client, CALIBRATION_REG2,
+ reg2_orig);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client, CALIBRATION_REG3,
+ reg3_orig);
+ if (error)
+ goto out;
+
+ /* calibration data enable */
+ error = i2c_smbus_write_byte_data(client, TEST1,
+ DUALTOUCH_STABILIZE_ON |
+ DUALTOUCH_REG_ON);
+ if (error)
+ goto out;
+
+ /* wait 10 sampling */
+ mdelay(10 * SAMPLING_DELAY);
+
+ error = -EBUSY;
+ }
+
+out:
+ error2 = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+ if (!error2)
+ /* Clear all interrupts */
+ error2 = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+
+ return error ? error : error2;
+}
+
+static const unsigned int untouch_threshold[3] = { 0, 1, 5 };
+static const unsigned int single_touch_threshold[3] = { 0, 0, 4 };
+static const unsigned int dual_touch_threshold[3] = { 10, 8, 0 };
+
+static irqreturn_t rohm_ts_soft_irq(int irq, void *dev_id)
+{
+ struct rohm_ts_data *ts = dev_id;
+ struct i2c_client *client = ts->client;
+ struct input_dev *input_dev = ts->input;
+ struct device *dev = &client->dev;
+
+ u8 buf[10]; /* for POS_X1_H(0x20)-TOUCH_GESTURE(0x29) */
+
+ struct input_mt_pos pos[MAX_CONTACTS];
+ int slots[MAX_CONTACTS];
+ u8 touch_flags;
+ unsigned int threshold;
+ int finger_count = -1;
+ int prev_finger_count = ts->finger_count;
+ int count;
+ int error;
+ int i;
+
+ error = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+ if (error)
+ return IRQ_HANDLED;
+
+ /* Clear all interrupts */
+ error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+ if (error)
+ return IRQ_HANDLED;
+
+#define READ_POS_BUF(reg) buf[((reg) - POS_X1_H)]
+
+ error = rohm_i2c_burst_read(client, POS_X1_H, buf, sizeof(buf));
+ if (error)
+ return IRQ_HANDLED;
+
+ touch_flags = READ_POS_BUF(TOUCH_GESTURE) & TOUCH_MASK;
+ if (touch_flags) {
+ /* generate coordinates */
+ pos[0].x = ((s16)READ_POS_BUF(POS_X1_H) << 2) |
+ READ_POS_BUF(POS_X1_L);
+ pos[0].y = ((s16)READ_POS_BUF(POS_Y1_H) << 2) |
+ READ_POS_BUF(POS_Y1_L);
+ pos[1].x = ((s16)READ_POS_BUF(POS_X2_H) << 2) |
+ READ_POS_BUF(POS_X2_L);
+ pos[1].y = ((s16)READ_POS_BUF(POS_Y2_H) << 2) |
+ READ_POS_BUF(POS_Y2_L);
+ }
+
+ switch (touch_flags) {
+ case 0:
+ threshold = untouch_threshold[prev_finger_count];
+ if (++ts->contact_count[0] >= threshold)
+ finger_count = 0;
+ break;
+
+ case SINGLE_TOUCH:
+ threshold = single_touch_threshold[prev_finger_count];
+ if (++ts->contact_count[1] >= threshold)
+ finger_count = 1;
+
+ if (finger_count == 1) {
+ if (pos[1].x != 0 && pos[1].y != 0) {
+ pos[0].x = pos[1].x;
+ pos[0].y = pos[1].y;
+ pos[1].x = 0;
+ pos[1].y = 0;
+ }
+ }
+ break;
+
+ case DUAL_TOUCH:
+ threshold = dual_touch_threshold[prev_finger_count];
+ if (++ts->contact_count[2] >= threshold)
+ finger_count = 2;
+ break;
+
+ default:
+ dev_dbg(dev,
+ "Three or more touches are not supported\n");
+ return IRQ_HANDLED;
+ }
+
+ if (finger_count >= 0) {
+ if (prev_finger_count != finger_count) {
+ count = ts->contact_count[finger_count];
+ memset(ts->contact_count, 0, sizeof(ts->contact_count));
+ ts->contact_count[finger_count] = count;
+ }
+
+ input_mt_assign_slots(input_dev, slots, pos,
+ finger_count, ROHM_TS_DISPLACEMENT_MAX);
+
+ for (i = 0; i < finger_count; i++) {
+ input_mt_slot(input_dev, slots[i]);
+ input_mt_report_slot_state(input_dev,
+ MT_TOOL_FINGER, true);
+ input_report_abs(input_dev,
+ ABS_MT_POSITION_X, pos[i].x);
+ input_report_abs(input_dev,
+ ABS_MT_POSITION_Y, pos[i].y);
+ }
+
+ input_mt_sync_frame(input_dev);
+ input_mt_report_pointer_emulation(input_dev, true);
+ input_sync(input_dev);
+
+ ts->finger_count = finger_count;
+ }
+
+ if (READ_POS_BUF(TOUCH_GESTURE) & CALIBRATION_REQUEST) {
+ error = rohm_ts_manual_calibration(ts);
+ if (error)
+ dev_warn(dev, "manual calibration failed: %d\n",
+ error);
+ }
+
+ i2c_smbus_write_byte_data(client, INT_MASK,
+ CALIBRATION_DONE | SLEEP_OUT | SLEEP_IN |
+ PROGRAM_LOAD_DONE);
+
+ return IRQ_HANDLED;
+}
+
+static int rohm_ts_load_firmware(struct i2c_client *client,
+ const char *firmware_name)
+{
+ struct device *dev = &client->dev;
+ const struct firmware *fw;
+ s32 status;
+ unsigned int offset, len, xfer_len;
+ unsigned int retry = 0;
+ int error, error2;
+
+ error = reject_firmware(&fw, firmware_name, dev);
+ if (error) {
+ dev_err(dev, "unable to retrieve firmware %s: %d\n",
+ firmware_name, error);
+ return error;
+ }
+
+ error = i2c_smbus_write_byte_data(client, INT_MASK,
+ COORD_UPDATE | CALIBRATION_DONE |
+ SLEEP_IN | SLEEP_OUT);
+ if (error)
+ goto out;
+
+ do {
+ if (retry) {
+ dev_warn(dev, "retrying firmware load\n");
+
+ /* settings for retry */
+ error = i2c_smbus_write_byte_data(client, EX_WDAT, 0);
+ if (error)
+ goto out;
+ }
+
+ error = i2c_smbus_write_byte_data(client, EX_ADDR_H, 0);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client, EX_ADDR_L, 0);
+ if (error)
+ goto out;
+
+ error = i2c_smbus_write_byte_data(client, COMMON_SETUP1,
+ COMMON_SETUP1_DEFAULT);
+ if (error)
+ goto out;
+
+ /* firmware load to the device */
+ offset = 0;
+ len = fw->size;
+
+ while (len) {
+ xfer_len = min(FIRMWARE_BLOCK_SIZE, len);
+
+ error = i2c_smbus_write_i2c_block_data(client, EX_WDAT,
+ xfer_len, &fw->data[offset]);
+ if (error)
+ goto out;
+
+ len -= xfer_len;
+ offset += xfer_len;
+ }
+
+ /* check firmware load result */
+ status = i2c_smbus_read_byte_data(client, INT_STATUS);
+ if (status < 0) {
+ error = status;
+ goto out;
+ }
+
+ /* clear all interrupts */
+ error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+ if (error)
+ goto out;
+
+ if (status == PROGRAM_LOAD_DONE)
+ break;
+
+ error = -EIO;
+ } while (++retry <= FIRMWARE_RETRY_MAX);
+
+out:
+ error2 = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+
+ release_firmware(fw);
+
+ return error ? error : error2;
+}
+
+static ssize_t swap_xy_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", !!(ts->setup2 & SWAP_XY));
+}
+
+static ssize_t swap_xy_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rohm_ts_data *ts = i2c_get_clientdata(client);
+ unsigned int val;
+ int error;
+
+ error = kstrtouint(buf, 0, &val);
+ if (error)
+ return error;
+
+ error = mutex_lock_interruptible(&ts->input->mutex);
+ if (error)
+ return error;
+
+ if (val)
+ ts->setup2 |= SWAP_XY;
+ else
+ ts->setup2 &= ~SWAP_XY;
+
+ if (ts->initialized)
+ error = i2c_smbus_write_byte_data(ts->client, COMMON_SETUP2,
+ ts->setup2);
+
+ mutex_unlock(&ts->input->mutex);
+
+ return error ? error : count;
+}
+
+static ssize_t inv_x_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", !!(ts->setup2 & INV_X));
+}
+
+static ssize_t inv_x_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rohm_ts_data *ts = i2c_get_clientdata(client);
+ unsigned int val;
+ int error;
+
+ error = kstrtouint(buf, 0, &val);
+ if (error)
+ return error;
+
+ error = mutex_lock_interruptible(&ts->input->mutex);
+ if (error)
+ return error;
+
+ if (val)
+ ts->setup2 |= INV_X;
+ else
+ ts->setup2 &= ~INV_X;
+
+ if (ts->initialized)
+ error = i2c_smbus_write_byte_data(ts->client, COMMON_SETUP2,
+ ts->setup2);
+
+ mutex_unlock(&ts->input->mutex);
+
+ return error ? error : count;
+}
+
+static ssize_t inv_y_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", !!(ts->setup2 & INV_Y));
+}
+
+static ssize_t inv_y_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rohm_ts_data *ts = i2c_get_clientdata(client);
+ unsigned int val;
+ int error;
+
+ error = kstrtouint(buf, 0, &val);
+ if (error)
+ return error;
+
+ error = mutex_lock_interruptible(&ts->input->mutex);
+ if (error)
+ return error;
+
+ if (val)
+ ts->setup2 |= INV_Y;
+ else
+ ts->setup2 &= ~INV_Y;
+
+ if (ts->initialized)
+ error = i2c_smbus_write_byte_data(client, COMMON_SETUP2,
+ ts->setup2);
+
+ mutex_unlock(&ts->input->mutex);
+
+ return error ? error : count;
+}
+
+static DEVICE_ATTR_RW(swap_xy);
+static DEVICE_ATTR_RW(inv_x);
+static DEVICE_ATTR_RW(inv_y);
+
+static struct attribute *rohm_ts_attrs[] = {
+ &dev_attr_swap_xy.attr,
+ &dev_attr_inv_x.attr,
+ &dev_attr_inv_y.attr,
+ NULL,
+};
+
+static const struct attribute_group rohm_ts_attr_group = {
+ .attrs = rohm_ts_attrs,
+};
+
+static int rohm_ts_device_init(struct i2c_client *client, u8 setup2)
+{
+ struct device *dev = &client->dev;
+ int error;
+
+ disable_irq(client->irq);
+
+ /*
+ * Wait 200usec for reset
+ */
+ udelay(200);
+
+ /* Release analog reset */
+ error = i2c_smbus_write_byte_data(client, SYSTEM,
+ ANALOG_POWER_ON | CPU_POWER_OFF);
+ if (error)
+ return error;
+
+ /* Waiting for the analog warm-up, max. 200usec */
+ udelay(200);
+
+ /* clear all interrupts */
+ error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, EX_WDAT, 0);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, COMMON_SETUP1, 0);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, COMMON_SETUP2, setup2);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, COMMON_SETUP3,
+ SEL_TBL_DEFAULT | EN_MULTI);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, THRESHOLD_GESTURE,
+ THRESHOLD_GESTURE_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, INTERVAL_TIME,
+ INTERVAL_TIME_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, CPU_FREQ, CPU_FREQ_10MHZ);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, PRM_SWOFF_TIME,
+ PRM_SWOFF_TIME_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, ADC_CTRL, ADC_DIV_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, ADC_WAIT, ADC_WAIT_DEFAULT);
+ if (error)
+ return error;
+
+ /*
+ * Panel setup, these values change with the panel.
+ */
+ error = i2c_smbus_write_byte_data(client, STEP_X, STEP_X_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, STEP_Y, STEP_Y_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, OFFSET_X, OFFSET_X_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, OFFSET_Y, OFFSET_Y_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, THRESHOLD_TOUCH,
+ THRESHOLD_TOUCH_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, EVR_XY, EVR_XY_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, EVR_X, EVR_X_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, EVR_Y, EVR_Y_DEFAULT);
+ if (error)
+ return error;
+
+ /* Fixed value settings */
+ error = i2c_smbus_write_byte_data(client, CALIBRATION_ADJUST,
+ CALIBRATION_ADJUST_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, SWCONT, SWCONT_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, TEST1,
+ DUALTOUCH_STABILIZE_ON |
+ DUALTOUCH_REG_ON);
+ if (error)
+ return error;
+
+ error = rohm_ts_load_firmware(client, BU21023_FIRMWARE_NAME);
+ if (error) {
+ dev_err(dev, "failed to load firmware: %d\n", error);
+ return error;
+ }
+
+ /*
+ * Manual calibration results are not changed in same environment.
+ * If the force calibration is performed,
+ * the controller will not require calibration request interrupt
+ * when the typical values are set to the calibration registers.
+ */
+ error = i2c_smbus_write_byte_data(client, CALIBRATION_REG1,
+ CALIBRATION_REG1_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, CALIBRATION_REG2,
+ CALIBRATION_REG2_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, CALIBRATION_REG3,
+ CALIBRATION_REG3_DEFAULT);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+ FORCE_CALIBRATION_OFF);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+ FORCE_CALIBRATION_ON);
+ if (error)
+ return error;
+
+ /* Clear all interrupts */
+ error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+ if (error)
+ return error;
+
+ /* Enable coordinates update interrupt */
+ error = i2c_smbus_write_byte_data(client, INT_MASK,
+ CALIBRATION_DONE | SLEEP_OUT |
+ SLEEP_IN | PROGRAM_LOAD_DONE);
+ if (error)
+ return error;
+
+ error = i2c_smbus_write_byte_data(client, ERR_MASK,
+ PROGRAM_LOAD_ERR | CPU_TIMEOUT |
+ ADC_TIMEOUT);
+ if (error)
+ return error;
+
+ /* controller CPU power on */
+ error = i2c_smbus_write_byte_data(client, SYSTEM,
+ ANALOG_POWER_ON | CPU_POWER_ON);
+
+ enable_irq(client->irq);
+
+ return error;
+}
+
+static int rohm_ts_power_off(struct i2c_client *client)
+{
+ int error;
+
+ error = i2c_smbus_write_byte_data(client, SYSTEM,
+ ANALOG_POWER_ON | CPU_POWER_OFF);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to power off device CPU: %d\n", error);
+ return error;
+ }
+
+ error = i2c_smbus_write_byte_data(client, SYSTEM,
+ ANALOG_POWER_OFF | CPU_POWER_OFF);
+ if (error)
+ dev_err(&client->dev,
+ "failed to power off the device: %d\n", error);
+
+ return error;
+}
+
+static int rohm_ts_open(struct input_dev *input_dev)
+{
+ struct rohm_ts_data *ts = input_get_drvdata(input_dev);
+ struct i2c_client *client = ts->client;
+ int error;
+
+ if (!ts->initialized) {
+ error = rohm_ts_device_init(client, ts->setup2);
+ if (error) {
+ dev_err(&client->dev,
+ "device initialization failed: %d\n", error);
+ return error;
+ }
+
+ ts->initialized = true;
+ }
+
+ return 0;
+}
+
+static void rohm_ts_close(struct input_dev *input_dev)
+{
+ struct rohm_ts_data *ts = input_get_drvdata(input_dev);
+
+ rohm_ts_power_off(ts->client);
+
+ ts->initialized = false;
+}
+
+static void rohm_ts_remove_sysfs_group(void *_dev)
+{
+ struct device *dev = _dev;
+
+ sysfs_remove_group(&dev->kobj, &rohm_ts_attr_group);
+}
+
+static int rohm_bu21023_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct rohm_ts_data *ts;
+ struct input_dev *input;
+ int error;
+
+ if (!client->irq) {
+ dev_err(dev, "IRQ is not assigned\n");
+ return -EINVAL;
+ }
+
+ if (!client->adapter->algo->master_xfer) {
+ dev_err(dev, "I2C level transfers not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ /* Turn off CPU just in case */
+ error = rohm_ts_power_off(client);
+ if (error)
+ return error;
+
+ ts = devm_kzalloc(dev, sizeof(struct rohm_ts_data), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = client;
+ ts->setup2 = MAF_1SAMPLE;
+ i2c_set_clientdata(client, ts);
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ input->name = BU21023_NAME;
+ input->id.bustype = BUS_I2C;
+ input->open = rohm_ts_open;
+ input->close = rohm_ts_close;
+
+ ts->input = input;
+ input_set_drvdata(input, ts);
+
+ input_set_abs_params(input, ABS_MT_POSITION_X,
+ ROHM_TS_ABS_X_MIN, ROHM_TS_ABS_X_MAX, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y,
+ ROHM_TS_ABS_Y_MIN, ROHM_TS_ABS_Y_MAX, 0, 0);
+
+ error = input_mt_init_slots(input, MAX_CONTACTS,
+ INPUT_MT_DIRECT | INPUT_MT_TRACK |
+ INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(dev, "failed to multi touch slots initialization\n");
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, client->irq,
+ NULL, rohm_ts_soft_irq,
+ IRQF_ONESHOT, client->name, ts);
+ if (error) {
+ dev_err(dev, "failed to request IRQ: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(dev, "failed to register input device: %d\n", error);
+ return error;
+ }
+
+ error = sysfs_create_group(&dev->kobj, &rohm_ts_attr_group);
+ if (error) {
+ dev_err(dev, "failed to create sysfs group: %d\n", error);
+ return error;
+ }
+
+ error = devm_add_action(dev, rohm_ts_remove_sysfs_group, dev);
+ if (error) {
+ rohm_ts_remove_sysfs_group(dev);
+ dev_err(&client->dev,
+ "Failed to add sysfs cleanup action: %d\n",
+ error);
+ return error;
+ }
+
+ return error;
+}
+
+static const struct i2c_device_id rohm_bu21023_i2c_id[] = {
+ { BU21023_NAME, 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, rohm_bu21023_i2c_id);
+
+static struct i2c_driver rohm_bu21023_i2c_driver = {
+ .driver = {
+ .name = BU21023_NAME,
+ },
+ .probe = rohm_bu21023_i2c_probe,
+ .id_table = rohm_bu21023_i2c_id,
+};
+module_i2c_driver(rohm_bu21023_i2c_driver);
+
+MODULE_DESCRIPTION("ROHM BU21023/24 Touchscreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("ROHM Co., Ltd.");
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
index 3f117637e..d214f22ed 100644
--- a/drivers/input/touchscreen/sur40.c
+++ b/drivers/input/touchscreen/sur40.c
@@ -38,6 +38,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-dev.h>
#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-dma-sg.h>
/* read 512 bytes from endpoint 0x86 -> get header + blobs */
@@ -163,7 +164,7 @@ struct sur40_state {
};
struct sur40_buffer {
- struct vb2_buffer vb;
+ struct vb2_v4l2_buffer vb;
struct list_head list;
};
@@ -420,7 +421,7 @@ static void sur40_process_video(struct sur40_state *sur40)
dev_dbg(sur40->dev, "header acquired\n");
- sgt = vb2_dma_sg_plane_desc(&new_buf->vb, 0);
+ sgt = vb2_dma_sg_plane_desc(&new_buf->vb.vb2_buf, 0);
result = usb_sg_init(&sgr, sur40->usbdev,
usb_rcvbulkpipe(sur40->usbdev, VIDEO_ENDPOINT), 0,
@@ -443,15 +444,15 @@ static void sur40_process_video(struct sur40_state *sur40)
goto err_poll;
/* mark as finished */
- v4l2_get_timestamp(&new_buf->vb.v4l2_buf.timestamp);
- new_buf->vb.v4l2_buf.sequence = sur40->sequence++;
- new_buf->vb.v4l2_buf.field = V4L2_FIELD_NONE;
- vb2_buffer_done(&new_buf->vb, VB2_BUF_STATE_DONE);
+ v4l2_get_timestamp(&new_buf->vb.timestamp);
+ new_buf->vb.sequence = sur40->sequence++;
+ new_buf->vb.field = V4L2_FIELD_NONE;
+ vb2_buffer_done(&new_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
dev_dbg(sur40->dev, "buffer marked done\n");
return;
err_poll:
- vb2_buffer_done(&new_buf->vb, VB2_BUF_STATE_ERROR);
+ vb2_buffer_done(&new_buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
}
/* Initialize input device parameters. */
@@ -643,10 +644,11 @@ static void sur40_disconnect(struct usb_interface *interface)
* minimum number: many DMA engines need a minimum of 2 buffers in the
* queue and you need to have another available for userspace processing.
*/
-static int sur40_queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
+static int sur40_queue_setup(struct vb2_queue *q, const void *parg,
unsigned int *nbuffers, unsigned int *nplanes,
unsigned int sizes[], void *alloc_ctxs[])
{
+ const struct v4l2_format *fmt = parg;
struct sur40_state *sur40 = vb2_get_drv_priv(q);
if (q->num_buffers + *nbuffers < 3)
@@ -701,7 +703,7 @@ static void return_all_buffers(struct sur40_state *sur40,
spin_lock(&sur40->qlock);
list_for_each_entry_safe(buf, node, &sur40->buf_list, list) {
- vb2_buffer_done(&buf->vb, state);
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
list_del(&buf->list);
}
spin_unlock(&sur40->qlock);
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 191a1b878..a21a07c3a 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -273,8 +273,6 @@ static irqreturn_t titsc_irq(int irq, void *dev)
status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
if (status & IRQENB_HW_PEN) {
ts_dev->pen_down = true;
- titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);
- titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
irqclr |= IRQENB_HW_PEN;
}
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
index 4ffd829d1..a340bfccd 100644
--- a/drivers/input/touchscreen/tps6507x-ts.c
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -50,14 +50,7 @@ struct tps6507x_ts {
static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
{
- int err;
-
- err = tsc->mfd->read_dev(tsc->mfd, reg, 1, data);
-
- if (err)
- return err;
-
- return 0;
+ return tsc->mfd->read_dev(tsc->mfd, reg, 1, data);
}
static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data)
diff --git a/drivers/input/touchscreen/ts4800-ts.c b/drivers/input/touchscreen/ts4800-ts.c
new file mode 100644
index 000000000..3c3dd7830
--- /dev/null
+++ b/drivers/input/touchscreen/ts4800-ts.c
@@ -0,0 +1,216 @@
+/*
+ * Touchscreen driver for the TS-4800 board
+ *
+ * Copyright (c) 2015 - Savoir-faire Linux
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* polling interval in ms */
+#define POLL_INTERVAL 3
+
+#define DEBOUNCE_COUNT 1
+
+/* sensor values are 12-bit wide */
+#define MAX_12BIT ((1 << 12) - 1)
+
+#define PENDOWN_MASK 0x1
+
+#define X_OFFSET 0x0
+#define Y_OFFSET 0x2
+
+struct ts4800_ts {
+ struct input_polled_dev *poll_dev;
+ struct device *dev;
+ char phys[32];
+
+ void __iomem *base;
+ struct regmap *regmap;
+ unsigned int reg;
+ unsigned int bit;
+
+ bool pendown;
+ int debounce;
+};
+
+static void ts4800_ts_open(struct input_polled_dev *dev)
+{
+ struct ts4800_ts *ts = dev->private;
+ int ret;
+
+ ts->pendown = false;
+ ts->debounce = DEBOUNCE_COUNT;
+
+ ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, ts->bit);
+ if (ret)
+ dev_warn(ts->dev, "Failed to enable touchscreen\n");
+}
+
+static void ts4800_ts_close(struct input_polled_dev *dev)
+{
+ struct ts4800_ts *ts = dev->private;
+ int ret;
+
+ ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, 0);
+ if (ret)
+ dev_warn(ts->dev, "Failed to disable touchscreen\n");
+
+}
+
+static void ts4800_ts_poll(struct input_polled_dev *dev)
+{
+ struct input_dev *input_dev = dev->input;
+ struct ts4800_ts *ts = dev->private;
+ u16 last_x = readw(ts->base + X_OFFSET);
+ u16 last_y = readw(ts->base + Y_OFFSET);
+ bool pendown = last_x & PENDOWN_MASK;
+
+ if (pendown) {
+ if (ts->debounce) {
+ ts->debounce--;
+ return;
+ }
+
+ if (!ts->pendown) {
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ ts->pendown = true;
+ }
+
+ last_x = ((~last_x) >> 4) & MAX_12BIT;
+ last_y = ((~last_y) >> 4) & MAX_12BIT;
+
+ input_report_abs(input_dev, ABS_X, last_x);
+ input_report_abs(input_dev, ABS_Y, last_y);
+ input_sync(input_dev);
+ } else if (ts->pendown) {
+ ts->pendown = false;
+ ts->debounce = DEBOUNCE_COUNT;
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_sync(input_dev);
+ }
+}
+
+static int ts4800_parse_dt(struct platform_device *pdev,
+ struct ts4800_ts *ts)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *syscon_np;
+ u32 reg, bit;
+ int error;
+
+ syscon_np = of_parse_phandle(np, "syscon", 0);
+ if (!syscon_np) {
+ dev_err(dev, "no syscon property\n");
+ return -ENODEV;
+ }
+
+ error = of_property_read_u32_index(np, "syscon", 1, &reg);
+ if (error < 0) {
+ dev_err(dev, "no offset in syscon\n");
+ return error;
+ }
+
+ ts->reg = reg;
+
+ error = of_property_read_u32_index(np, "syscon", 2, &bit);
+ if (error < 0) {
+ dev_err(dev, "no bit in syscon\n");
+ return error;
+ }
+
+ ts->bit = BIT(bit);
+
+ ts->regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(ts->regmap)) {
+ dev_err(dev, "cannot get parent's regmap\n");
+ return PTR_ERR(ts->regmap);
+ }
+
+ return 0;
+}
+
+static int ts4800_ts_probe(struct platform_device *pdev)
+{
+ struct input_polled_dev *poll_dev;
+ struct ts4800_ts *ts;
+ struct resource *res;
+ int error;
+
+ ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ error = ts4800_parse_dt(pdev, ts);
+ if (error)
+ return error;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ts->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ts->base))
+ return PTR_ERR(ts->base);
+
+ poll_dev = devm_input_allocate_polled_device(&pdev->dev);
+ if (!poll_dev)
+ return -ENOMEM;
+
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&pdev->dev));
+ ts->poll_dev = poll_dev;
+ ts->dev = &pdev->dev;
+
+ poll_dev->private = ts;
+ poll_dev->poll_interval = POLL_INTERVAL;
+ poll_dev->open = ts4800_ts_open;
+ poll_dev->close = ts4800_ts_close;
+ poll_dev->poll = ts4800_ts_poll;
+
+ poll_dev->input->name = "TS-4800 Touchscreen";
+ poll_dev->input->phys = ts->phys;
+
+ input_set_capability(poll_dev->input, EV_KEY, BTN_TOUCH);
+ input_set_abs_params(poll_dev->input, ABS_X, 0, MAX_12BIT, 0, 0);
+ input_set_abs_params(poll_dev->input, ABS_Y, 0, MAX_12BIT, 0, 0);
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(&pdev->dev,
+ "Unabled to register polled input device (%d)\n",
+ error);
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ts4800_ts_of_match[] = {
+ { .compatible = "technologic,ts4800-ts", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ts4800_ts_of_match);
+
+static struct platform_driver ts4800_ts_driver = {
+ .driver = {
+ .name = "ts4800-ts",
+ .of_match_table = ts4800_ts_of_match,
+ },
+ .probe = ts4800_ts_probe,
+};
+module_platform_driver(ts4800_ts_driver);
+
+MODULE_AUTHOR("Damien Riegel <damien.riegel@savoirfairelinux.com>");
+MODULE_DESCRIPTION("TS-4800 Touchscreen Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ts4800_ts");
diff --git a/drivers/input/touchscreen/tsc2004.c b/drivers/input/touchscreen/tsc2004.c
new file mode 100644
index 000000000..7295c198a
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2004.c
@@ -0,0 +1,83 @@
+/*
+ * TSC2004 touchscreen driver
+ *
+ * Copyright (C) 2015 QWERTY Embedded Design
+ * Copyright (C) 2015 EMAC Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include "tsc200x-core.h"
+
+static int tsc2004_cmd(struct device *dev, u8 cmd)
+{
+ u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
+ s32 data;
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ data = i2c_smbus_write_byte(i2c, tx);
+ if (data < 0) {
+ dev_err(dev, "%s: failed, command: %x i2c error: %d\n",
+ __func__, cmd, data);
+ return data;
+ }
+
+ return 0;
+}
+
+static int tsc2004_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+
+{
+ return tsc200x_probe(&i2c->dev, i2c->irq, BUS_I2C,
+ devm_regmap_init_i2c(i2c, &tsc200x_regmap_config),
+ tsc2004_cmd);
+}
+
+static int tsc2004_remove(struct i2c_client *i2c)
+{
+ return tsc200x_remove(&i2c->dev);
+}
+
+static const struct i2c_device_id tsc2004_idtable[] = {
+ { "tsc2004", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tsc2004_idtable);
+
+#ifdef CONFIG_OF
+static const struct of_device_id tsc2004_of_match[] = {
+ { .compatible = "ti,tsc2004" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tsc2004_of_match);
+#endif
+
+static struct i2c_driver tsc2004_driver = {
+ .driver = {
+ .name = "tsc2004",
+ .of_match_table = of_match_ptr(tsc2004_of_match),
+ .pm = &tsc200x_pm_ops,
+ },
+ .id_table = tsc2004_idtable,
+ .probe = tsc2004_probe,
+ .remove = tsc2004_remove,
+};
+module_i2c_driver(tsc2004_driver);
+
+MODULE_AUTHOR("Michael Welling <mwelling@ieee.org>");
+MODULE_DESCRIPTION("TSC2004 Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index 0f65d02ee..b9f593dfd 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -2,9 +2,10 @@
* TSC2005 touchscreen driver
*
* Copyright (C) 2006-2010 Nokia Corporation
+ * Copyright (C) 2015 QWERTY Embedded Design
+ * Copyright (C) 2015 EMAC Inc.
*
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
+ * Based on original tsc2005.c by Lauri Leukkunen <lauri.leukkunen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,192 +16,32 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
-#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/input.h>
-#include <linux/input/touchscreen.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/of.h>
#include <linux/spi/spi.h>
-#include <linux/spi/tsc2005.h>
-#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
-#include <linux/gpio/consumer.h>
-
-/*
- * The touchscreen interface operates as follows:
- *
- * 1) Pen is pressed against the touchscreen.
- * 2) TSC2005 performs AD conversion.
- * 3) After the conversion is done TSC2005 drives DAV line down.
- * 4) GPIO IRQ is received and tsc2005_irq_thread() is scheduled.
- * 5) tsc2005_irq_thread() queues up an spi transfer to fetch the x, y, z1, z2
- * values.
- * 6) tsc2005_irq_thread() reports coordinates to input layer and sets up
- * tsc2005_penup_timer() to be called after TSC2005_PENUP_TIME_MS (40ms).
- * 7) When the penup timer expires, there have not been touch or DAV interrupts
- * during the last 40ms which means the pen has been lifted.
- *
- * ESD recovery via a hardware reset is done if the TSC2005 doesn't respond
- * after a configurable period (in ms) of activity. If esd_timeout is 0, the
- * watchdog is disabled.
- */
-
-/* control byte 1 */
-#define TSC2005_CMD 0x80
-#define TSC2005_CMD_NORMAL 0x00
-#define TSC2005_CMD_STOP 0x01
-#define TSC2005_CMD_12BIT 0x04
-
-/* control byte 0 */
-#define TSC2005_REG_READ 0x01 /* R/W access */
-#define TSC2005_REG_PND0 0x02 /* Power Not Down Control */
-#define TSC2005_REG_X (0x0 << 3)
-#define TSC2005_REG_Y (0x1 << 3)
-#define TSC2005_REG_Z1 (0x2 << 3)
-#define TSC2005_REG_Z2 (0x3 << 3)
-#define TSC2005_REG_AUX (0x4 << 3)
-#define TSC2005_REG_TEMP1 (0x5 << 3)
-#define TSC2005_REG_TEMP2 (0x6 << 3)
-#define TSC2005_REG_STATUS (0x7 << 3)
-#define TSC2005_REG_AUX_HIGH (0x8 << 3)
-#define TSC2005_REG_AUX_LOW (0x9 << 3)
-#define TSC2005_REG_TEMP_HIGH (0xA << 3)
-#define TSC2005_REG_TEMP_LOW (0xB << 3)
-#define TSC2005_REG_CFR0 (0xC << 3)
-#define TSC2005_REG_CFR1 (0xD << 3)
-#define TSC2005_REG_CFR2 (0xE << 3)
-#define TSC2005_REG_CONV_FUNC (0xF << 3)
-
-/* configuration register 0 */
-#define TSC2005_CFR0_PRECHARGE_276US 0x0040
-#define TSC2005_CFR0_STABTIME_1MS 0x0300
-#define TSC2005_CFR0_CLOCK_1MHZ 0x1000
-#define TSC2005_CFR0_RESOLUTION12 0x2000
-#define TSC2005_CFR0_PENMODE 0x8000
-#define TSC2005_CFR0_INITVALUE (TSC2005_CFR0_STABTIME_1MS | \
- TSC2005_CFR0_CLOCK_1MHZ | \
- TSC2005_CFR0_RESOLUTION12 | \
- TSC2005_CFR0_PRECHARGE_276US | \
- TSC2005_CFR0_PENMODE)
-
-/* bits common to both read and write of configuration register 0 */
-#define TSC2005_CFR0_RW_MASK 0x3fff
-
-/* configuration register 1 */
-#define TSC2005_CFR1_BATCHDELAY_4MS 0x0003
-#define TSC2005_CFR1_INITVALUE TSC2005_CFR1_BATCHDELAY_4MS
-
-/* configuration register 2 */
-#define TSC2005_CFR2_MAVE_Z 0x0004
-#define TSC2005_CFR2_MAVE_Y 0x0008
-#define TSC2005_CFR2_MAVE_X 0x0010
-#define TSC2005_CFR2_AVG_7 0x0800
-#define TSC2005_CFR2_MEDIUM_15 0x3000
-#define TSC2005_CFR2_INITVALUE (TSC2005_CFR2_MAVE_X | \
- TSC2005_CFR2_MAVE_Y | \
- TSC2005_CFR2_MAVE_Z | \
- TSC2005_CFR2_MEDIUM_15 | \
- TSC2005_CFR2_AVG_7)
-
-#define MAX_12BIT 0xfff
-#define TSC2005_DEF_X_FUZZ 4
-#define TSC2005_DEF_Y_FUZZ 8
-#define TSC2005_DEF_P_FUZZ 2
-#define TSC2005_DEF_RESISTOR 280
-
-#define TSC2005_SPI_MAX_SPEED_HZ 10000000
-#define TSC2005_PENUP_TIME_MS 40
-
-static const struct regmap_range tsc2005_writable_ranges[] = {
- regmap_reg_range(TSC2005_REG_AUX_HIGH, TSC2005_REG_CFR2),
-};
-
-static const struct regmap_access_table tsc2005_writable_table = {
- .yes_ranges = tsc2005_writable_ranges,
- .n_yes_ranges = ARRAY_SIZE(tsc2005_writable_ranges),
-};
-
-static struct regmap_config tsc2005_regmap_config = {
- .reg_bits = 8,
- .val_bits = 16,
- .reg_stride = 0x08,
- .max_register = 0x78,
- .read_flag_mask = TSC2005_REG_READ,
- .write_flag_mask = TSC2005_REG_PND0,
- .wr_table = &tsc2005_writable_table,
- .use_single_rw = true,
-};
-
-struct tsc2005_data {
- u16 x;
- u16 y;
- u16 z1;
- u16 z2;
-} __packed;
-#define TSC2005_DATA_REGS 4
-
-struct tsc2005 {
- struct spi_device *spi;
- struct regmap *regmap;
-
- struct input_dev *idev;
- char phys[32];
-
- struct mutex mutex;
-
- /* raw copy of previous x,y,z */
- int in_x;
- int in_y;
- int in_z1;
- int in_z2;
-
- spinlock_t lock;
- struct timer_list penup_timer;
+#include "tsc200x-core.h"
- unsigned int esd_timeout;
- struct delayed_work esd_work;
- unsigned long last_valid_interrupt;
-
- unsigned int x_plate_ohm;
-
- bool opened;
- bool suspended;
-
- bool pen_down;
-
- struct regulator *vio;
-
- struct gpio_desc *reset_gpio;
- void (*set_reset)(bool enable);
-};
-
-static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
+static int tsc2005_cmd(struct device *dev, u8 cmd)
{
- u8 tx = TSC2005_CMD | TSC2005_CMD_12BIT | cmd;
+ u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
struct spi_transfer xfer = {
- .tx_buf = &tx,
- .len = 1,
- .bits_per_word = 8,
+ .tx_buf = &tx,
+ .len = 1,
+ .bits_per_word = 8,
};
struct spi_message msg;
+ struct spi_device *spi = to_spi_device(dev);
int error;
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
- error = spi_sync(ts->spi, &msg);
+ error = spi_sync(spi, &msg);
if (error) {
- dev_err(&ts->spi->dev, "%s: failed, command: %x, error: %d\n",
+ dev_err(dev, "%s: failed, command: %x, spi error: %d\n",
__func__, cmd, error);
return error;
}
@@ -208,382 +49,10 @@ static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
return 0;
}
-static void tsc2005_update_pen_state(struct tsc2005 *ts,
- int x, int y, int pressure)
-{
- if (pressure) {
- input_report_abs(ts->idev, ABS_X, x);
- input_report_abs(ts->idev, ABS_Y, y);
- input_report_abs(ts->idev, ABS_PRESSURE, pressure);
- if (!ts->pen_down) {
- input_report_key(ts->idev, BTN_TOUCH, !!pressure);
- ts->pen_down = true;
- }
- } else {
- input_report_abs(ts->idev, ABS_PRESSURE, 0);
- if (ts->pen_down) {
- input_report_key(ts->idev, BTN_TOUCH, 0);
- ts->pen_down = false;
- }
- }
- input_sync(ts->idev);
- dev_dbg(&ts->spi->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
- pressure);
-}
-
-static irqreturn_t tsc2005_irq_thread(int irq, void *_ts)
-{
- struct tsc2005 *ts = _ts;
- unsigned long flags;
- unsigned int pressure;
- struct tsc2005_data tsdata;
- int error;
-
- /* read the coordinates */
- error = regmap_bulk_read(ts->regmap, TSC2005_REG_X, &tsdata,
- TSC2005_DATA_REGS);
- if (unlikely(error))
- goto out;
-
- /* validate position */
- if (unlikely(tsdata.x > MAX_12BIT || tsdata.y > MAX_12BIT))
- goto out;
-
- /* Skip reading if the pressure components are out of range */
- if (unlikely(tsdata.z1 == 0 || tsdata.z2 > MAX_12BIT))
- goto out;
- if (unlikely(tsdata.z1 >= tsdata.z2))
- goto out;
-
- /*
- * Skip point if this is a pen down with the exact same values as
- * the value before pen-up - that implies SPI fed us stale data
- */
- if (!ts->pen_down &&
- ts->in_x == tsdata.x && ts->in_y == tsdata.y &&
- ts->in_z1 == tsdata.z1 && ts->in_z2 == tsdata.z2) {
- goto out;
- }
-
- /*
- * At this point we are happy we have a valid and useful reading.
- * Remember it for later comparisons. We may now begin downsampling.
- */
- ts->in_x = tsdata.x;
- ts->in_y = tsdata.y;
- ts->in_z1 = tsdata.z1;
- ts->in_z2 = tsdata.z2;
-
- /* Compute touch pressure resistance using equation #1 */
- pressure = tsdata.x * (tsdata.z2 - tsdata.z1) / tsdata.z1;
- pressure = pressure * ts->x_plate_ohm / 4096;
- if (unlikely(pressure > MAX_12BIT))
- goto out;
-
- spin_lock_irqsave(&ts->lock, flags);
-
- tsc2005_update_pen_state(ts, tsdata.x, tsdata.y, pressure);
- mod_timer(&ts->penup_timer,
- jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS));
-
- spin_unlock_irqrestore(&ts->lock, flags);
-
- ts->last_valid_interrupt = jiffies;
-out:
- return IRQ_HANDLED;
-}
-
-static void tsc2005_penup_timer(unsigned long data)
-{
- struct tsc2005 *ts = (struct tsc2005 *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&ts->lock, flags);
- tsc2005_update_pen_state(ts, 0, 0, 0);
- spin_unlock_irqrestore(&ts->lock, flags);
-}
-
-static void tsc2005_start_scan(struct tsc2005 *ts)
-{
- regmap_write(ts->regmap, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
- regmap_write(ts->regmap, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
- regmap_write(ts->regmap, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
- tsc2005_cmd(ts, TSC2005_CMD_NORMAL);
-}
-
-static void tsc2005_stop_scan(struct tsc2005 *ts)
-{
- tsc2005_cmd(ts, TSC2005_CMD_STOP);
-}
-
-static void tsc2005_set_reset(struct tsc2005 *ts, bool enable)
-{
- if (ts->reset_gpio)
- gpiod_set_value_cansleep(ts->reset_gpio, enable);
- else if (ts->set_reset)
- ts->set_reset(enable);
-}
-
-/* must be called with ts->mutex held */
-static void __tsc2005_disable(struct tsc2005 *ts)
-{
- tsc2005_stop_scan(ts);
-
- disable_irq(ts->spi->irq);
- del_timer_sync(&ts->penup_timer);
-
- cancel_delayed_work_sync(&ts->esd_work);
-
- enable_irq(ts->spi->irq);
-}
-
-/* must be called with ts->mutex held */
-static void __tsc2005_enable(struct tsc2005 *ts)
-{
- tsc2005_start_scan(ts);
-
- if (ts->esd_timeout && (ts->set_reset || ts->reset_gpio)) {
- ts->last_valid_interrupt = jiffies;
- schedule_delayed_work(&ts->esd_work,
- round_jiffies_relative(
- msecs_to_jiffies(ts->esd_timeout)));
- }
-
-}
-
-static ssize_t tsc2005_selftest_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct tsc2005 *ts = dev_get_drvdata(dev);
- unsigned int temp_high;
- unsigned int temp_high_orig;
- unsigned int temp_high_test;
- bool success = true;
- int error;
-
- mutex_lock(&ts->mutex);
-
- /*
- * Test TSC2005 communications via temp high register.
- */
- __tsc2005_disable(ts);
-
- error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
- if (error) {
- dev_warn(dev, "selftest failed: read error %d\n", error);
- success = false;
- goto out;
- }
-
- temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
-
- error = regmap_write(ts->regmap, TSC2005_REG_TEMP_HIGH, temp_high_test);
- if (error) {
- dev_warn(dev, "selftest failed: write error %d\n", error);
- success = false;
- goto out;
- }
-
- error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high);
- if (error) {
- dev_warn(dev, "selftest failed: read error %d after write\n",
- error);
- success = false;
- goto out;
- }
-
- if (temp_high != temp_high_test) {
- dev_warn(dev, "selftest failed: %d != %d\n",
- temp_high, temp_high_test);
- success = false;
- }
-
- /* hardware reset */
- tsc2005_set_reset(ts, false);
- usleep_range(100, 500); /* only 10us required */
- tsc2005_set_reset(ts, true);
-
- if (!success)
- goto out;
-
- /* test that the reset really happened */
- error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high);
- if (error) {
- dev_warn(dev, "selftest failed: read error %d after reset\n",
- error);
- success = false;
- goto out;
- }
-
- if (temp_high != temp_high_orig) {
- dev_warn(dev, "selftest failed after reset: %d != %d\n",
- temp_high, temp_high_orig);
- success = false;
- }
-
-out:
- __tsc2005_enable(ts);
- mutex_unlock(&ts->mutex);
-
- return sprintf(buf, "%d\n", success);
-}
-
-static DEVICE_ATTR(selftest, S_IRUGO, tsc2005_selftest_show, NULL);
-
-static struct attribute *tsc2005_attrs[] = {
- &dev_attr_selftest.attr,
- NULL
-};
-
-static umode_t tsc2005_attr_is_visible(struct kobject *kobj,
- struct attribute *attr, int n)
-{
- struct device *dev = container_of(kobj, struct device, kobj);
- struct tsc2005 *ts = dev_get_drvdata(dev);
- umode_t mode = attr->mode;
-
- if (attr == &dev_attr_selftest.attr) {
- if (!ts->set_reset && !ts->reset_gpio)
- mode = 0;
- }
-
- return mode;
-}
-
-static const struct attribute_group tsc2005_attr_group = {
- .is_visible = tsc2005_attr_is_visible,
- .attrs = tsc2005_attrs,
-};
-
-static void tsc2005_esd_work(struct work_struct *work)
-{
- struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work);
- int error;
- unsigned int r;
-
- if (!mutex_trylock(&ts->mutex)) {
- /*
- * If the mutex is taken, it means that disable or enable is in
- * progress. In that case just reschedule the work. If the work
- * is not needed, it will be canceled by disable.
- */
- goto reschedule;
- }
-
- if (time_is_after_jiffies(ts->last_valid_interrupt +
- msecs_to_jiffies(ts->esd_timeout)))
- goto out;
-
- /* We should be able to read register without disabling interrupts. */
- error = regmap_read(ts->regmap, TSC2005_REG_CFR0, &r);
- if (!error &&
- !((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) {
- goto out;
- }
-
- /*
- * If we could not read our known value from configuration register 0
- * then we should reset the controller as if from power-up and start
- * scanning again.
- */
- dev_info(&ts->spi->dev, "TSC2005 not responding - resetting\n");
-
- disable_irq(ts->spi->irq);
- del_timer_sync(&ts->penup_timer);
-
- tsc2005_update_pen_state(ts, 0, 0, 0);
-
- tsc2005_set_reset(ts, false);
- usleep_range(100, 500); /* only 10us required */
- tsc2005_set_reset(ts, true);
-
- enable_irq(ts->spi->irq);
- tsc2005_start_scan(ts);
-
-out:
- mutex_unlock(&ts->mutex);
-reschedule:
- /* re-arm the watchdog */
- schedule_delayed_work(&ts->esd_work,
- round_jiffies_relative(
- msecs_to_jiffies(ts->esd_timeout)));
-}
-
-static int tsc2005_open(struct input_dev *input)
-{
- struct tsc2005 *ts = input_get_drvdata(input);
-
- mutex_lock(&ts->mutex);
-
- if (!ts->suspended)
- __tsc2005_enable(ts);
-
- ts->opened = true;
-
- mutex_unlock(&ts->mutex);
-
- return 0;
-}
-
-static void tsc2005_close(struct input_dev *input)
-{
- struct tsc2005 *ts = input_get_drvdata(input);
-
- mutex_lock(&ts->mutex);
-
- if (!ts->suspended)
- __tsc2005_disable(ts);
-
- ts->opened = false;
-
- mutex_unlock(&ts->mutex);
-}
-
static int tsc2005_probe(struct spi_device *spi)
{
- const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev);
- struct device_node *np = spi->dev.of_node;
-
- struct tsc2005 *ts;
- struct input_dev *input_dev;
- unsigned int max_x = MAX_12BIT;
- unsigned int max_y = MAX_12BIT;
- unsigned int max_p = MAX_12BIT;
- unsigned int fudge_x = TSC2005_DEF_X_FUZZ;
- unsigned int fudge_y = TSC2005_DEF_Y_FUZZ;
- unsigned int fudge_p = TSC2005_DEF_P_FUZZ;
- unsigned int x_plate_ohm = TSC2005_DEF_RESISTOR;
- unsigned int esd_timeout;
int error;
- if (!np && !pdata) {
- dev_err(&spi->dev, "no platform data\n");
- return -ENODEV;
- }
-
- if (spi->irq <= 0) {
- dev_err(&spi->dev, "no irq\n");
- return -ENODEV;
- }
-
- if (pdata) {
- fudge_x = pdata->ts_x_fudge;
- fudge_y = pdata->ts_y_fudge;
- fudge_p = pdata->ts_pressure_fudge;
- max_x = pdata->ts_x_max;
- max_y = pdata->ts_y_max;
- max_p = pdata->ts_pressure_max;
- x_plate_ohm = pdata->ts_x_plate_ohm;
- esd_timeout = pdata->esd_timeout_ms;
- } else {
- x_plate_ohm = TSC2005_DEF_RESISTOR;
- of_property_read_u32(np, "ti,x-plate-ohms", &x_plate_ohm);
- esd_timeout = 0;
- of_property_read_u32(np, "ti,esd-recovery-timeout-ms",
- &esd_timeout);
- }
-
spi->mode = SPI_MODE_0;
spi->bits_per_word = 8;
if (!spi->max_speed_hz)
@@ -593,175 +62,27 @@ static int tsc2005_probe(struct spi_device *spi)
if (error)
return error;
- ts = devm_kzalloc(&spi->dev, sizeof(*ts), GFP_KERNEL);
- if (!ts)
- return -ENOMEM;
-
- input_dev = devm_input_allocate_device(&spi->dev);
- if (!input_dev)
- return -ENOMEM;
-
- ts->spi = spi;
- ts->idev = input_dev;
-
- ts->regmap = devm_regmap_init_spi(spi, &tsc2005_regmap_config);
- if (IS_ERR(ts->regmap))
- return PTR_ERR(ts->regmap);
-
- ts->x_plate_ohm = x_plate_ohm;
- ts->esd_timeout = esd_timeout;
-
- ts->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
- GPIOD_OUT_HIGH);
- if (IS_ERR(ts->reset_gpio)) {
- error = PTR_ERR(ts->reset_gpio);
- dev_err(&spi->dev, "error acquiring reset gpio: %d\n", error);
- return error;
- }
-
- ts->vio = devm_regulator_get_optional(&spi->dev, "vio");
- if (IS_ERR(ts->vio)) {
- error = PTR_ERR(ts->vio);
- dev_err(&spi->dev, "vio regulator missing (%d)", error);
- return error;
- }
-
- if (!ts->reset_gpio && pdata)
- ts->set_reset = pdata->set_reset;
-
- mutex_init(&ts->mutex);
-
- spin_lock_init(&ts->lock);
- setup_timer(&ts->penup_timer, tsc2005_penup_timer, (unsigned long)ts);
-
- INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work);
-
- snprintf(ts->phys, sizeof(ts->phys),
- "%s/input-ts", dev_name(&spi->dev));
-
- input_dev->name = "TSC2005 touchscreen";
- input_dev->phys = ts->phys;
- input_dev->id.bustype = BUS_SPI;
- input_dev->dev.parent = &spi->dev;
- input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
- input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
-
- if (np)
- touchscreen_parse_properties(input_dev, false);
-
- input_dev->open = tsc2005_open;
- input_dev->close = tsc2005_close;
-
- input_set_drvdata(input_dev, ts);
-
- /* Ensure the touchscreen is off */
- tsc2005_stop_scan(ts);
-
- error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
- tsc2005_irq_thread,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- "tsc2005", ts);
- if (error) {
- dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
- return error;
- }
-
- /* enable regulator for DT */
- if (ts->vio) {
- error = regulator_enable(ts->vio);
- if (error)
- return error;
- }
-
- dev_set_drvdata(&spi->dev, ts);
- error = sysfs_create_group(&spi->dev.kobj, &tsc2005_attr_group);
- if (error) {
- dev_err(&spi->dev,
- "Failed to create sysfs attributes, err: %d\n", error);
- goto disable_regulator;
- }
-
- error = input_register_device(ts->idev);
- if (error) {
- dev_err(&spi->dev,
- "Failed to register input device, err: %d\n", error);
- goto err_remove_sysfs;
- }
-
- irq_set_irq_wake(spi->irq, 1);
- return 0;
-
-err_remove_sysfs:
- sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
-disable_regulator:
- if (ts->vio)
- regulator_disable(ts->vio);
- return error;
+ return tsc200x_probe(&spi->dev, spi->irq, BUS_SPI,
+ devm_regmap_init_spi(spi, &tsc200x_regmap_config),
+ tsc2005_cmd);
}
static int tsc2005_remove(struct spi_device *spi)
{
- struct tsc2005 *ts = dev_get_drvdata(&spi->dev);
-
- sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
-
- if (ts->vio)
- regulator_disable(ts->vio);
-
- return 0;
-}
-
-static int __maybe_unused tsc2005_suspend(struct device *dev)
-{
- struct tsc2005 *ts = dev_get_drvdata(dev);
-
- mutex_lock(&ts->mutex);
-
- if (!ts->suspended && ts->opened)
- __tsc2005_disable(ts);
-
- ts->suspended = true;
-
- mutex_unlock(&ts->mutex);
-
- return 0;
-}
-
-static int __maybe_unused tsc2005_resume(struct device *dev)
-{
- struct tsc2005 *ts = dev_get_drvdata(dev);
-
- mutex_lock(&ts->mutex);
-
- if (ts->suspended && ts->opened)
- __tsc2005_enable(ts);
-
- ts->suspended = false;
-
- mutex_unlock(&ts->mutex);
-
- return 0;
+ return tsc200x_remove(&spi->dev);
}
-static SIMPLE_DEV_PM_OPS(tsc2005_pm_ops, tsc2005_suspend, tsc2005_resume);
-
static struct spi_driver tsc2005_driver = {
.driver = {
.name = "tsc2005",
- .owner = THIS_MODULE,
- .pm = &tsc2005_pm_ops,
+ .pm = &tsc200x_pm_ops,
},
.probe = tsc2005_probe,
.remove = tsc2005_remove,
};
-
module_spi_driver(tsc2005_driver);
-MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
+MODULE_AUTHOR("Michael Welling <mwelling@ieee.org>");
MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("spi:tsc2005");
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
new file mode 100644
index 000000000..15240c1ee
--- /dev/null
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -0,0 +1,665 @@
+/*
+ * TSC2004/TSC2005 touchscreen driver core
+ *
+ * Copyright (C) 2006-2010 Nokia Corporation
+ * Copyright (C) 2015 QWERTY Embedded Design
+ * Copyright (C) 2015 EMAC Inc.
+ *
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/spi/tsc2005.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+#include "tsc200x-core.h"
+
+/*
+ * The touchscreen interface operates as follows:
+ *
+ * 1) Pen is pressed against the touchscreen.
+ * 2) TSC200X performs AD conversion.
+ * 3) After the conversion is done TSC200X drives DAV line down.
+ * 4) GPIO IRQ is received and tsc200x_irq_thread() is scheduled.
+ * 5) tsc200x_irq_thread() queues up a transfer to fetch the x, y, z1, z2
+ * values.
+ * 6) tsc200x_irq_thread() reports coordinates to input layer and sets up
+ * tsc200x_penup_timer() to be called after TSC200X_PENUP_TIME_MS (40ms).
+ * 7) When the penup timer expires, there have not been touch or DAV interrupts
+ * during the last 40ms which means the pen has been lifted.
+ *
+ * ESD recovery via a hardware reset is done if the TSC200X doesn't respond
+ * after a configurable period (in ms) of activity. If esd_timeout is 0, the
+ * watchdog is disabled.
+ */
+
+static const struct regmap_range tsc200x_writable_ranges[] = {
+ regmap_reg_range(TSC200X_REG_AUX_HIGH, TSC200X_REG_CFR2),
+};
+
+static const struct regmap_access_table tsc200x_writable_table = {
+ .yes_ranges = tsc200x_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(tsc200x_writable_ranges),
+};
+
+const struct regmap_config tsc200x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .reg_stride = 0x08,
+ .max_register = 0x78,
+ .read_flag_mask = TSC200X_REG_READ,
+ .write_flag_mask = TSC200X_REG_PND0,
+ .wr_table = &tsc200x_writable_table,
+ .use_single_rw = true,
+};
+EXPORT_SYMBOL_GPL(tsc200x_regmap_config);
+
+struct tsc200x_data {
+ u16 x;
+ u16 y;
+ u16 z1;
+ u16 z2;
+} __packed;
+#define TSC200X_DATA_REGS 4
+
+struct tsc200x {
+ struct device *dev;
+ struct regmap *regmap;
+ __u16 bustype;
+
+ struct input_dev *idev;
+ char phys[32];
+
+ struct mutex mutex;
+
+ /* raw copy of previous x,y,z */
+ int in_x;
+ int in_y;
+ int in_z1;
+ int in_z2;
+
+ spinlock_t lock;
+ struct timer_list penup_timer;
+
+ unsigned int esd_timeout;
+ struct delayed_work esd_work;
+ unsigned long last_valid_interrupt;
+
+ unsigned int x_plate_ohm;
+
+ bool opened;
+ bool suspended;
+
+ bool pen_down;
+
+ struct regulator *vio;
+
+ struct gpio_desc *reset_gpio;
+ void (*set_reset)(bool enable);
+ int (*tsc200x_cmd)(struct device *dev, u8 cmd);
+ int irq;
+};
+
+static void tsc200x_update_pen_state(struct tsc200x *ts,
+ int x, int y, int pressure)
+{
+ if (pressure) {
+ input_report_abs(ts->idev, ABS_X, x);
+ input_report_abs(ts->idev, ABS_Y, y);
+ input_report_abs(ts->idev, ABS_PRESSURE, pressure);
+ if (!ts->pen_down) {
+ input_report_key(ts->idev, BTN_TOUCH, !!pressure);
+ ts->pen_down = true;
+ }
+ } else {
+ input_report_abs(ts->idev, ABS_PRESSURE, 0);
+ if (ts->pen_down) {
+ input_report_key(ts->idev, BTN_TOUCH, 0);
+ ts->pen_down = false;
+ }
+ }
+ input_sync(ts->idev);
+ dev_dbg(ts->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
+ pressure);
+}
+
+static irqreturn_t tsc200x_irq_thread(int irq, void *_ts)
+{
+ struct tsc200x *ts = _ts;
+ unsigned long flags;
+ unsigned int pressure;
+ struct tsc200x_data tsdata;
+ int error;
+
+ /* read the coordinates */
+ error = regmap_bulk_read(ts->regmap, TSC200X_REG_X, &tsdata,
+ TSC200X_DATA_REGS);
+ if (unlikely(error))
+ goto out;
+
+ /* validate position */
+ if (unlikely(tsdata.x > MAX_12BIT || tsdata.y > MAX_12BIT))
+ goto out;
+
+ /* Skip reading if the pressure components are out of range */
+ if (unlikely(tsdata.z1 == 0 || tsdata.z2 > MAX_12BIT))
+ goto out;
+ if (unlikely(tsdata.z1 >= tsdata.z2))
+ goto out;
+
+ /*
+ * Skip point if this is a pen down with the exact same values as
+ * the value before pen-up - that implies SPI fed us stale data
+ */
+ if (!ts->pen_down &&
+ ts->in_x == tsdata.x && ts->in_y == tsdata.y &&
+ ts->in_z1 == tsdata.z1 && ts->in_z2 == tsdata.z2) {
+ goto out;
+ }
+
+ /*
+ * At this point we are happy we have a valid and useful reading.
+ * Remember it for later comparisons. We may now begin downsampling.
+ */
+ ts->in_x = tsdata.x;
+ ts->in_y = tsdata.y;
+ ts->in_z1 = tsdata.z1;
+ ts->in_z2 = tsdata.z2;
+
+ /* Compute touch pressure resistance using equation #1 */
+ pressure = tsdata.x * (tsdata.z2 - tsdata.z1) / tsdata.z1;
+ pressure = pressure * ts->x_plate_ohm / 4096;
+ if (unlikely(pressure > MAX_12BIT))
+ goto out;
+
+ spin_lock_irqsave(&ts->lock, flags);
+
+ tsc200x_update_pen_state(ts, tsdata.x, tsdata.y, pressure);
+ mod_timer(&ts->penup_timer,
+ jiffies + msecs_to_jiffies(TSC200X_PENUP_TIME_MS));
+
+ spin_unlock_irqrestore(&ts->lock, flags);
+
+ ts->last_valid_interrupt = jiffies;
+out:
+ return IRQ_HANDLED;
+}
+
+static void tsc200x_penup_timer(unsigned long data)
+{
+ struct tsc200x *ts = (struct tsc200x *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ts->lock, flags);
+ tsc200x_update_pen_state(ts, 0, 0, 0);
+ spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void tsc200x_start_scan(struct tsc200x *ts)
+{
+ regmap_write(ts->regmap, TSC200X_REG_CFR0, TSC200X_CFR0_INITVALUE);
+ regmap_write(ts->regmap, TSC200X_REG_CFR1, TSC200X_CFR1_INITVALUE);
+ regmap_write(ts->regmap, TSC200X_REG_CFR2, TSC200X_CFR2_INITVALUE);
+ ts->tsc200x_cmd(ts->dev, TSC200X_CMD_NORMAL);
+}
+
+static void tsc200x_stop_scan(struct tsc200x *ts)
+{
+ ts->tsc200x_cmd(ts->dev, TSC200X_CMD_STOP);
+}
+
+static void tsc200x_set_reset(struct tsc200x *ts, bool enable)
+{
+ if (ts->reset_gpio)
+ gpiod_set_value_cansleep(ts->reset_gpio, enable);
+ else if (ts->set_reset)
+ ts->set_reset(enable);
+}
+
+/* must be called with ts->mutex held */
+static void __tsc200x_disable(struct tsc200x *ts)
+{
+ tsc200x_stop_scan(ts);
+
+ disable_irq(ts->irq);
+ del_timer_sync(&ts->penup_timer);
+
+ cancel_delayed_work_sync(&ts->esd_work);
+
+ enable_irq(ts->irq);
+}
+
+/* must be called with ts->mutex held */
+static void __tsc200x_enable(struct tsc200x *ts)
+{
+ tsc200x_start_scan(ts);
+
+ if (ts->esd_timeout && (ts->set_reset || ts->reset_gpio)) {
+ ts->last_valid_interrupt = jiffies;
+ schedule_delayed_work(&ts->esd_work,
+ round_jiffies_relative(
+ msecs_to_jiffies(ts->esd_timeout)));
+ }
+}
+
+static ssize_t tsc200x_selftest_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct tsc200x *ts = dev_get_drvdata(dev);
+ unsigned int temp_high;
+ unsigned int temp_high_orig;
+ unsigned int temp_high_test;
+ bool success = true;
+ int error;
+
+ mutex_lock(&ts->mutex);
+
+ /*
+ * Test TSC200X communications via temp high register.
+ */
+ __tsc200x_disable(ts);
+
+ error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high_orig);
+ if (error) {
+ dev_warn(dev, "selftest failed: read error %d\n", error);
+ success = false;
+ goto out;
+ }
+
+ temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
+
+ error = regmap_write(ts->regmap, TSC200X_REG_TEMP_HIGH, temp_high_test);
+ if (error) {
+ dev_warn(dev, "selftest failed: write error %d\n", error);
+ success = false;
+ goto out;
+ }
+
+ error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
+ if (error) {
+ dev_warn(dev, "selftest failed: read error %d after write\n",
+ error);
+ success = false;
+ goto out;
+ }
+
+ if (temp_high != temp_high_test) {
+ dev_warn(dev, "selftest failed: %d != %d\n",
+ temp_high, temp_high_test);
+ success = false;
+ }
+
+ /* hardware reset */
+ tsc200x_set_reset(ts, false);
+ usleep_range(100, 500); /* only 10us required */
+ tsc200x_set_reset(ts, true);
+
+ if (!success)
+ goto out;
+
+ /* test that the reset really happened */
+ error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
+ if (error) {
+ dev_warn(dev, "selftest failed: read error %d after reset\n",
+ error);
+ success = false;
+ goto out;
+ }
+
+ if (temp_high != temp_high_orig) {
+ dev_warn(dev, "selftest failed after reset: %d != %d\n",
+ temp_high, temp_high_orig);
+ success = false;
+ }
+
+out:
+ __tsc200x_enable(ts);
+ mutex_unlock(&ts->mutex);
+
+ return sprintf(buf, "%d\n", success);
+}
+
+static DEVICE_ATTR(selftest, S_IRUGO, tsc200x_selftest_show, NULL);
+
+static struct attribute *tsc200x_attrs[] = {
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static umode_t tsc200x_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct tsc200x *ts = dev_get_drvdata(dev);
+ umode_t mode = attr->mode;
+
+ if (attr == &dev_attr_selftest.attr) {
+ if (!ts->set_reset && !ts->reset_gpio)
+ mode = 0;
+ }
+
+ return mode;
+}
+
+static const struct attribute_group tsc200x_attr_group = {
+ .is_visible = tsc200x_attr_is_visible,
+ .attrs = tsc200x_attrs,
+};
+
+static void tsc200x_esd_work(struct work_struct *work)
+{
+ struct tsc200x *ts = container_of(work, struct tsc200x, esd_work.work);
+ int error;
+ unsigned int r;
+
+ if (!mutex_trylock(&ts->mutex)) {
+ /*
+ * If the mutex is taken, it means that disable or enable is in
+ * progress. In that case just reschedule the work. If the work
+ * is not needed, it will be canceled by disable.
+ */
+ goto reschedule;
+ }
+
+ if (time_is_after_jiffies(ts->last_valid_interrupt +
+ msecs_to_jiffies(ts->esd_timeout)))
+ goto out;
+
+ /* We should be able to read register without disabling interrupts. */
+ error = regmap_read(ts->regmap, TSC200X_REG_CFR0, &r);
+ if (!error &&
+ !((r ^ TSC200X_CFR0_INITVALUE) & TSC200X_CFR0_RW_MASK)) {
+ goto out;
+ }
+
+ /*
+ * If we could not read our known value from configuration register 0
+ * then we should reset the controller as if from power-up and start
+ * scanning again.
+ */
+ dev_info(ts->dev, "TSC200X not responding - resetting\n");
+
+ disable_irq(ts->irq);
+ del_timer_sync(&ts->penup_timer);
+
+ tsc200x_update_pen_state(ts, 0, 0, 0);
+
+ tsc200x_set_reset(ts, false);
+ usleep_range(100, 500); /* only 10us required */
+ tsc200x_set_reset(ts, true);
+
+ enable_irq(ts->irq);
+ tsc200x_start_scan(ts);
+
+out:
+ mutex_unlock(&ts->mutex);
+reschedule:
+ /* re-arm the watchdog */
+ schedule_delayed_work(&ts->esd_work,
+ round_jiffies_relative(
+ msecs_to_jiffies(ts->esd_timeout)));
+}
+
+static int tsc200x_open(struct input_dev *input)
+{
+ struct tsc200x *ts = input_get_drvdata(input);
+
+ mutex_lock(&ts->mutex);
+
+ if (!ts->suspended)
+ __tsc200x_enable(ts);
+
+ ts->opened = true;
+
+ mutex_unlock(&ts->mutex);
+
+ return 0;
+}
+
+static void tsc200x_close(struct input_dev *input)
+{
+ struct tsc200x *ts = input_get_drvdata(input);
+
+ mutex_lock(&ts->mutex);
+
+ if (!ts->suspended)
+ __tsc200x_disable(ts);
+
+ ts->opened = false;
+
+ mutex_unlock(&ts->mutex);
+}
+
+int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
+ struct regmap *regmap,
+ int (*tsc200x_cmd)(struct device *dev, u8 cmd))
+{
+ const struct tsc2005_platform_data *pdata = dev_get_platdata(dev);
+ struct device_node *np = dev->of_node;
+
+ struct tsc200x *ts;
+ struct input_dev *input_dev;
+ unsigned int max_x = MAX_12BIT;
+ unsigned int max_y = MAX_12BIT;
+ unsigned int max_p = MAX_12BIT;
+ unsigned int fudge_x = TSC200X_DEF_X_FUZZ;
+ unsigned int fudge_y = TSC200X_DEF_Y_FUZZ;
+ unsigned int fudge_p = TSC200X_DEF_P_FUZZ;
+ unsigned int x_plate_ohm = TSC200X_DEF_RESISTOR;
+ unsigned int esd_timeout;
+ int error;
+
+ if (!np && !pdata) {
+ dev_err(dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -ENODEV;
+ }
+
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ if (!tsc200x_cmd) {
+ dev_err(dev, "no cmd function\n");
+ return -ENODEV;
+ }
+
+ if (pdata) {
+ fudge_x = pdata->ts_x_fudge;
+ fudge_y = pdata->ts_y_fudge;
+ fudge_p = pdata->ts_pressure_fudge;
+ max_x = pdata->ts_x_max;
+ max_y = pdata->ts_y_max;
+ max_p = pdata->ts_pressure_max;
+ x_plate_ohm = pdata->ts_x_plate_ohm;
+ esd_timeout = pdata->esd_timeout_ms;
+ } else {
+ x_plate_ohm = TSC200X_DEF_RESISTOR;
+ of_property_read_u32(np, "ti,x-plate-ohms", &x_plate_ohm);
+ esd_timeout = 0;
+ of_property_read_u32(np, "ti,esd-recovery-timeout-ms",
+ &esd_timeout);
+ }
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ input_dev = devm_input_allocate_device(dev);
+ if (!input_dev)
+ return -ENOMEM;
+
+ ts->irq = irq;
+ ts->dev = dev;
+ ts->idev = input_dev;
+ ts->regmap = regmap;
+ ts->tsc200x_cmd = tsc200x_cmd;
+ ts->x_plate_ohm = x_plate_ohm;
+ ts->esd_timeout = esd_timeout;
+
+ ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ts->reset_gpio)) {
+ error = PTR_ERR(ts->reset_gpio);
+ dev_err(dev, "error acquiring reset gpio: %d\n", error);
+ return error;
+ }
+
+ ts->vio = devm_regulator_get_optional(dev, "vio");
+ if (IS_ERR(ts->vio)) {
+ error = PTR_ERR(ts->vio);
+ dev_err(dev, "vio regulator missing (%d)", error);
+ return error;
+ }
+
+ if (!ts->reset_gpio && pdata)
+ ts->set_reset = pdata->set_reset;
+
+ mutex_init(&ts->mutex);
+
+ spin_lock_init(&ts->lock);
+ setup_timer(&ts->penup_timer, tsc200x_penup_timer, (unsigned long)ts);
+
+ INIT_DELAYED_WORK(&ts->esd_work, tsc200x_esd_work);
+
+ snprintf(ts->phys, sizeof(ts->phys),
+ "%s/input-ts", dev_name(dev));
+
+ input_dev->name = "TSC200X touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->id.bustype = bustype;
+ input_dev->dev.parent = dev;
+ input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
+
+ if (np)
+ touchscreen_parse_properties(input_dev, false);
+
+ input_dev->open = tsc200x_open;
+ input_dev->close = tsc200x_close;
+
+ input_set_drvdata(input_dev, ts);
+
+ /* Ensure the touchscreen is off */
+ tsc200x_stop_scan(ts);
+
+ error = devm_request_threaded_irq(dev, irq, NULL,
+ tsc200x_irq_thread,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "tsc200x", ts);
+ if (error) {
+ dev_err(dev, "Failed to request irq, err: %d\n", error);
+ return error;
+ }
+
+ /* enable regulator for DT */
+ if (ts->vio) {
+ error = regulator_enable(ts->vio);
+ if (error)
+ return error;
+ }
+
+ dev_set_drvdata(dev, ts);
+ error = sysfs_create_group(&dev->kobj, &tsc200x_attr_group);
+ if (error) {
+ dev_err(dev,
+ "Failed to create sysfs attributes, err: %d\n", error);
+ goto disable_regulator;
+ }
+
+ error = input_register_device(ts->idev);
+ if (error) {
+ dev_err(dev,
+ "Failed to register input device, err: %d\n", error);
+ goto err_remove_sysfs;
+ }
+
+ irq_set_irq_wake(irq, 1);
+ return 0;
+
+err_remove_sysfs:
+ sysfs_remove_group(&dev->kobj, &tsc200x_attr_group);
+disable_regulator:
+ if (ts->vio)
+ regulator_disable(ts->vio);
+ return error;
+}
+EXPORT_SYMBOL_GPL(tsc200x_probe);
+
+int tsc200x_remove(struct device *dev)
+{
+ struct tsc200x *ts = dev_get_drvdata(dev);
+
+ sysfs_remove_group(&dev->kobj, &tsc200x_attr_group);
+
+ if (ts->vio)
+ regulator_disable(ts->vio);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tsc200x_remove);
+
+static int __maybe_unused tsc200x_suspend(struct device *dev)
+{
+ struct tsc200x *ts = dev_get_drvdata(dev);
+
+ mutex_lock(&ts->mutex);
+
+ if (!ts->suspended && ts->opened)
+ __tsc200x_disable(ts);
+
+ ts->suspended = true;
+
+ mutex_unlock(&ts->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused tsc200x_resume(struct device *dev)
+{
+ struct tsc200x *ts = dev_get_drvdata(dev);
+
+ mutex_lock(&ts->mutex);
+
+ if (ts->suspended && ts->opened)
+ __tsc200x_enable(ts);
+
+ ts->suspended = false;
+
+ mutex_unlock(&ts->mutex);
+
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(tsc200x_pm_ops, tsc200x_suspend, tsc200x_resume);
+EXPORT_SYMBOL_GPL(tsc200x_pm_ops);
+
+MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
+MODULE_DESCRIPTION("TSC200x Touchscreen Driver Core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc200x-core.h b/drivers/input/touchscreen/tsc200x-core.h
new file mode 100644
index 000000000..7a482d102
--- /dev/null
+++ b/drivers/input/touchscreen/tsc200x-core.h
@@ -0,0 +1,78 @@
+#ifndef _TSC200X_CORE_H
+#define _TSC200X_CORE_H
+
+/* control byte 1 */
+#define TSC200X_CMD 0x80
+#define TSC200X_CMD_NORMAL 0x00
+#define TSC200X_CMD_STOP 0x01
+#define TSC200X_CMD_12BIT 0x04
+
+/* control byte 0 */
+#define TSC200X_REG_READ 0x01 /* R/W access */
+#define TSC200X_REG_PND0 0x02 /* Power Not Down Control */
+#define TSC200X_REG_X (0x0 << 3)
+#define TSC200X_REG_Y (0x1 << 3)
+#define TSC200X_REG_Z1 (0x2 << 3)
+#define TSC200X_REG_Z2 (0x3 << 3)
+#define TSC200X_REG_AUX (0x4 << 3)
+#define TSC200X_REG_TEMP1 (0x5 << 3)
+#define TSC200X_REG_TEMP2 (0x6 << 3)
+#define TSC200X_REG_STATUS (0x7 << 3)
+#define TSC200X_REG_AUX_HIGH (0x8 << 3)
+#define TSC200X_REG_AUX_LOW (0x9 << 3)
+#define TSC200X_REG_TEMP_HIGH (0xA << 3)
+#define TSC200X_REG_TEMP_LOW (0xB << 3)
+#define TSC200X_REG_CFR0 (0xC << 3)
+#define TSC200X_REG_CFR1 (0xD << 3)
+#define TSC200X_REG_CFR2 (0xE << 3)
+#define TSC200X_REG_CONV_FUNC (0xF << 3)
+
+/* configuration register 0 */
+#define TSC200X_CFR0_PRECHARGE_276US 0x0040
+#define TSC200X_CFR0_STABTIME_1MS 0x0300
+#define TSC200X_CFR0_CLOCK_1MHZ 0x1000
+#define TSC200X_CFR0_RESOLUTION12 0x2000
+#define TSC200X_CFR0_PENMODE 0x8000
+#define TSC200X_CFR0_INITVALUE (TSC200X_CFR0_STABTIME_1MS | \
+ TSC200X_CFR0_CLOCK_1MHZ | \
+ TSC200X_CFR0_RESOLUTION12 | \
+ TSC200X_CFR0_PRECHARGE_276US | \
+ TSC200X_CFR0_PENMODE)
+
+/* bits common to both read and write of configuration register 0 */
+#define TSC200X_CFR0_RW_MASK 0x3fff
+
+/* configuration register 1 */
+#define TSC200X_CFR1_BATCHDELAY_4MS 0x0003
+#define TSC200X_CFR1_INITVALUE TSC200X_CFR1_BATCHDELAY_4MS
+
+/* configuration register 2 */
+#define TSC200X_CFR2_MAVE_Z 0x0004
+#define TSC200X_CFR2_MAVE_Y 0x0008
+#define TSC200X_CFR2_MAVE_X 0x0010
+#define TSC200X_CFR2_AVG_7 0x0800
+#define TSC200X_CFR2_MEDIUM_15 0x3000
+#define TSC200X_CFR2_INITVALUE (TSC200X_CFR2_MAVE_X | \
+ TSC200X_CFR2_MAVE_Y | \
+ TSC200X_CFR2_MAVE_Z | \
+ TSC200X_CFR2_MEDIUM_15 | \
+ TSC200X_CFR2_AVG_7)
+
+#define MAX_12BIT 0xfff
+#define TSC200X_DEF_X_FUZZ 4
+#define TSC200X_DEF_Y_FUZZ 8
+#define TSC200X_DEF_P_FUZZ 2
+#define TSC200X_DEF_RESISTOR 280
+
+#define TSC2005_SPI_MAX_SPEED_HZ 10000000
+#define TSC200X_PENUP_TIME_MS 40
+
+extern const struct regmap_config tsc200x_regmap_config;
+extern const struct dev_pm_ops tsc200x_pm_ops;
+
+int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
+ struct regmap *regmap,
+ int (*tsc200x_cmd)(struct device *dev, u8 cmd));
+int tsc200x_remove(struct device *dev);
+
+#endif
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 2792ca397..bab3c6acf 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -80,7 +80,8 @@ struct w8001_touch_query {
*/
struct w8001 {
- struct input_dev *dev;
+ struct input_dev *pen_dev;
+ struct input_dev *touch_dev;
struct serio *serio;
struct completion cmd_done;
int id;
@@ -95,7 +96,10 @@ struct w8001 {
u16 max_touch_y;
u16 max_pen_x;
u16 max_pen_y;
- char name[64];
+ char pen_name[64];
+ char touch_name[64];
+ int open_count;
+ struct mutex mutex;
};
static void parse_pen_data(u8 *data, struct w8001_coord *coord)
@@ -141,7 +145,7 @@ static void scale_touch_coordinates(struct w8001 *w8001,
static void parse_multi_touch(struct w8001 *w8001)
{
- struct input_dev *dev = w8001->dev;
+ struct input_dev *dev = w8001->touch_dev;
unsigned char *data = w8001->data;
unsigned int x, y;
int i;
@@ -151,7 +155,6 @@ static void parse_multi_touch(struct w8001 *w8001)
bool touch = data[0] & (1 << i);
input_mt_slot(dev, i);
- input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
if (touch) {
x = (data[6 * i + 1] << 7) | data[6 * i + 2];
y = (data[6 * i + 3] << 7) | data[6 * i + 4];
@@ -207,7 +210,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
{
- struct input_dev *dev = w8001->dev;
+ struct input_dev *dev = w8001->pen_dev;
/*
* We have 1 bit for proximity (rdy) and 3 bits for tip, side,
@@ -233,11 +236,6 @@ static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
break;
case BTN_TOOL_FINGER:
- input_report_key(dev, BTN_TOUCH, 0);
- input_report_key(dev, BTN_TOOL_FINGER, 0);
- input_sync(dev);
- /* fall through */
-
case KEY_RESERVED:
w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
break;
@@ -261,7 +259,7 @@ static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
{
- struct input_dev *dev = w8001->dev;
+ struct input_dev *dev = w8001->touch_dev;
unsigned int x = coord->x;
unsigned int y = coord->y;
@@ -271,7 +269,6 @@ static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
input_report_key(dev, BTN_TOUCH, coord->tsw);
- input_report_key(dev, BTN_TOOL_FINGER, coord->tsw);
input_sync(dev);
@@ -369,22 +366,36 @@ static int w8001_command(struct w8001 *w8001, unsigned char command,
static int w8001_open(struct input_dev *dev)
{
struct w8001 *w8001 = input_get_drvdata(dev);
+ int err;
- return w8001_command(w8001, W8001_CMD_START, false);
+ err = mutex_lock_interruptible(&w8001->mutex);
+ if (err)
+ return err;
+
+ if (w8001->open_count++ == 0) {
+ err = w8001_command(w8001, W8001_CMD_START, false);
+ if (err)
+ w8001->open_count--;
+ }
+
+ mutex_unlock(&w8001->mutex);
+ return err;
}
static void w8001_close(struct input_dev *dev)
{
struct w8001 *w8001 = input_get_drvdata(dev);
- w8001_command(w8001, W8001_CMD_STOP, false);
+ mutex_lock(&w8001->mutex);
+
+ if (--w8001->open_count == 0)
+ w8001_command(w8001, W8001_CMD_STOP, false);
+
+ mutex_unlock(&w8001->mutex);
}
-static int w8001_setup(struct w8001 *w8001)
+static int w8001_detect(struct w8001 *w8001)
{
- struct input_dev *dev = w8001->dev;
- struct w8001_coord coord;
- struct w8001_touch_query touch;
int error;
error = w8001_command(w8001, W8001_CMD_STOP, false);
@@ -393,105 +404,145 @@ static int w8001_setup(struct w8001 *w8001)
msleep(250); /* wait 250ms before querying the device */
- dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
+ return 0;
+}
- __set_bit(INPUT_PROP_DIRECT, dev->propbit);
+static int w8001_setup_pen(struct w8001 *w8001, char *basename,
+ size_t basename_sz)
+{
+ struct input_dev *dev = w8001->pen_dev;
+ struct w8001_coord coord;
+ int error;
/* penabled? */
error = w8001_command(w8001, W8001_CMD_QUERY, true);
- if (!error) {
- __set_bit(BTN_TOUCH, dev->keybit);
- __set_bit(BTN_TOOL_PEN, dev->keybit);
- __set_bit(BTN_TOOL_RUBBER, dev->keybit);
- __set_bit(BTN_STYLUS, dev->keybit);
- __set_bit(BTN_STYLUS2, dev->keybit);
-
- parse_pen_data(w8001->response, &coord);
- w8001->max_pen_x = coord.x;
- w8001->max_pen_y = coord.y;
-
- input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
- input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
- input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
- input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
- input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
- if (coord.tilt_x && coord.tilt_y) {
- input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
- input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
- }
- w8001->id = 0x90;
- strlcat(w8001->name, " Penabled", sizeof(w8001->name));
+ if (error)
+ return error;
+
+ __set_bit(EV_KEY, dev->evbit);
+ __set_bit(EV_ABS, dev->evbit);
+ __set_bit(BTN_TOUCH, dev->keybit);
+ __set_bit(BTN_TOOL_PEN, dev->keybit);
+ __set_bit(BTN_TOOL_RUBBER, dev->keybit);
+ __set_bit(BTN_STYLUS, dev->keybit);
+ __set_bit(BTN_STYLUS2, dev->keybit);
+ __set_bit(INPUT_PROP_DIRECT, dev->propbit);
+
+ parse_pen_data(w8001->response, &coord);
+ w8001->max_pen_x = coord.x;
+ w8001->max_pen_y = coord.y;
+
+ input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+ input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+ input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
+ input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+ if (coord.tilt_x && coord.tilt_y) {
+ input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+ input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
}
+ w8001->id = 0x90;
+ strlcat(basename, " Penabled", basename_sz);
+
+ return 0;
+}
+
+static int w8001_setup_touch(struct w8001 *w8001, char *basename,
+ size_t basename_sz)
+{
+ struct input_dev *dev = w8001->touch_dev;
+ struct w8001_touch_query touch;
+ int error;
+
+
/* Touch enabled? */
error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
-
+ if (error)
+ return error;
/*
* Some non-touch devices may reply to the touch query. But their
* second byte is empty, which indicates touch is not supported.
*/
- if (!error && w8001->response[1]) {
- __set_bit(BTN_TOUCH, dev->keybit);
- __set_bit(BTN_TOOL_FINGER, dev->keybit);
-
- parse_touchquery(w8001->response, &touch);
- w8001->max_touch_x = touch.x;
- w8001->max_touch_y = touch.y;
-
- if (w8001->max_pen_x && w8001->max_pen_y) {
- /* if pen is supported scale to pen maximum */
- touch.x = w8001->max_pen_x;
- touch.y = w8001->max_pen_y;
- touch.panel_res = W8001_PEN_RESOLUTION;
- }
+ if (!w8001->response[1])
+ return -ENXIO;
- input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
- input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
- input_abs_set_res(dev, ABS_X, touch.panel_res);
- input_abs_set_res(dev, ABS_Y, touch.panel_res);
-
- switch (touch.sensor_id) {
- case 0:
- case 2:
- w8001->pktlen = W8001_PKTLEN_TOUCH93;
- w8001->id = 0x93;
- strlcat(w8001->name, " 1FG", sizeof(w8001->name));
- break;
+ __set_bit(EV_KEY, dev->evbit);
+ __set_bit(EV_ABS, dev->evbit);
+ __set_bit(BTN_TOUCH, dev->keybit);
+ __set_bit(INPUT_PROP_DIRECT, dev->propbit);
- case 1:
- case 3:
- case 4:
- w8001->pktlen = W8001_PKTLEN_TOUCH9A;
- strlcat(w8001->name, " 1FG", sizeof(w8001->name));
- w8001->id = 0x9a;
- break;
+ parse_touchquery(w8001->response, &touch);
+ w8001->max_touch_x = touch.x;
+ w8001->max_touch_y = touch.y;
- case 5:
- w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
-
- input_mt_init_slots(dev, 2, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_X,
- 0, touch.x, 0, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_Y,
- 0, touch.y, 0, 0);
- input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
- 0, MT_TOOL_MAX, 0, 0);
-
- strlcat(w8001->name, " 2FG", sizeof(w8001->name));
- if (w8001->max_pen_x && w8001->max_pen_y)
- w8001->id = 0xE3;
- else
- w8001->id = 0xE2;
- break;
- }
+ if (w8001->max_pen_x && w8001->max_pen_y) {
+ /* if pen is supported scale to pen maximum */
+ touch.x = w8001->max_pen_x;
+ touch.y = w8001->max_pen_y;
+ touch.panel_res = W8001_PEN_RESOLUTION;
+ }
+
+ input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+ input_abs_set_res(dev, ABS_X, touch.panel_res);
+ input_abs_set_res(dev, ABS_Y, touch.panel_res);
+
+ switch (touch.sensor_id) {
+ case 0:
+ case 2:
+ w8001->pktlen = W8001_PKTLEN_TOUCH93;
+ w8001->id = 0x93;
+ strlcat(basename, " 1FG", basename_sz);
+ break;
+
+ case 1:
+ case 3:
+ case 4:
+ w8001->pktlen = W8001_PKTLEN_TOUCH9A;
+ strlcat(basename, " 1FG", basename_sz);
+ w8001->id = 0x9a;
+ break;
+
+ case 5:
+ w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
+
+ __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
+ input_mt_init_slots(dev, 2, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_X,
+ 0, touch.x, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y,
+ 0, touch.y, 0, 0);
+
+ strlcat(basename, " 2FG", basename_sz);
+ if (w8001->max_pen_x && w8001->max_pen_y)
+ w8001->id = 0xE3;
+ else
+ w8001->id = 0xE2;
+ break;
}
- strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
+ strlcat(basename, " Touchscreen", basename_sz);
return 0;
}
+static void w8001_set_devdata(struct input_dev *dev, struct w8001 *w8001,
+ struct serio *serio)
+{
+ dev->phys = w8001->phys;
+ dev->id.bustype = BUS_RS232;
+ dev->id.product = w8001->id;
+ dev->id.vendor = 0x056a;
+ dev->id.version = 0x0100;
+ dev->open = w8001_open;
+ dev->close = w8001_close;
+
+ dev->dev.parent = &serio->dev;
+
+ input_set_drvdata(dev, w8001);
+}
+
/*
* w8001_disconnect() is the opposite of w8001_connect()
*/
@@ -502,7 +553,10 @@ static void w8001_disconnect(struct serio *serio)
serio_close(serio);
- input_unregister_device(w8001->dev);
+ if (w8001->pen_dev)
+ input_unregister_device(w8001->pen_dev);
+ if (w8001->touch_dev)
+ input_unregister_device(w8001->touch_dev);
kfree(w8001);
serio_set_drvdata(serio, NULL);
@@ -517,18 +571,23 @@ static void w8001_disconnect(struct serio *serio)
static int w8001_connect(struct serio *serio, struct serio_driver *drv)
{
struct w8001 *w8001;
- struct input_dev *input_dev;
- int err;
+ struct input_dev *input_dev_pen;
+ struct input_dev *input_dev_touch;
+ char basename[64];
+ int err, err_pen, err_touch;
w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!w8001 || !input_dev) {
+ input_dev_pen = input_allocate_device();
+ input_dev_touch = input_allocate_device();
+ if (!w8001 || !input_dev_pen || !input_dev_touch) {
err = -ENOMEM;
goto fail1;
}
w8001->serio = serio;
- w8001->dev = input_dev;
+ w8001->pen_dev = input_dev_pen;
+ w8001->touch_dev = input_dev_touch;
+ mutex_init(&w8001->mutex);
init_completion(&w8001->cmd_done);
snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
@@ -537,35 +596,67 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
if (err)
goto fail2;
- err = w8001_setup(w8001);
+ err = w8001_detect(w8001);
if (err)
goto fail3;
- input_dev->name = w8001->name;
- input_dev->phys = w8001->phys;
- input_dev->id.product = w8001->id;
- input_dev->id.bustype = BUS_RS232;
- input_dev->id.vendor = 0x056a;
- input_dev->id.version = 0x0100;
- input_dev->dev.parent = &serio->dev;
+ /* For backwards-compatibility we compose the basename based on
+ * capabilities and then just append the tool type
+ */
+ strlcpy(basename, "Wacom Serial", sizeof(basename));
+
+ err_pen = w8001_setup_pen(w8001, basename, sizeof(basename));
+ err_touch = w8001_setup_touch(w8001, basename, sizeof(basename));
+ if (err_pen && err_touch) {
+ err = -ENXIO;
+ goto fail3;
+ }
+
+ if (!err_pen) {
+ strlcpy(w8001->pen_name, basename, sizeof(w8001->pen_name));
+ strlcat(w8001->pen_name, " Pen", sizeof(w8001->pen_name));
+ input_dev_pen->name = w8001->pen_name;
- input_dev->open = w8001_open;
- input_dev->close = w8001_close;
+ w8001_set_devdata(input_dev_pen, w8001, serio);
- input_set_drvdata(input_dev, w8001);
+ err = input_register_device(w8001->pen_dev);
+ if (err)
+ goto fail3;
+ } else {
+ input_free_device(input_dev_pen);
+ input_dev_pen = NULL;
+ w8001->pen_dev = NULL;
+ }
- err = input_register_device(w8001->dev);
- if (err)
- goto fail3;
+ if (!err_touch) {
+ strlcpy(w8001->touch_name, basename, sizeof(w8001->touch_name));
+ strlcat(w8001->touch_name, " Finger",
+ sizeof(w8001->touch_name));
+ input_dev_touch->name = w8001->touch_name;
+
+ w8001_set_devdata(input_dev_touch, w8001, serio);
+
+ err = input_register_device(w8001->touch_dev);
+ if (err)
+ goto fail4;
+ } else {
+ input_free_device(input_dev_touch);
+ input_dev_touch = NULL;
+ w8001->touch_dev = NULL;
+ }
return 0;
+fail4:
+ if (w8001->pen_dev)
+ input_unregister_device(w8001->pen_dev);
fail3:
serio_close(serio);
fail2:
serio_set_drvdata(serio, NULL);
fail1:
- input_free_device(input_dev);
+ input_free_device(input_dev_pen);
+ input_free_device(input_dev_touch);
kfree(w8001);
return err;
}
diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
index 781d0f830..9bbadaaf6 100644
--- a/drivers/input/touchscreen/zforce_ts.c
+++ b/drivers/input/touchscreen/zforce_ts.c
@@ -599,13 +599,8 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id)
static int zforce_input_open(struct input_dev *dev)
{
struct zforce_ts *ts = input_get_drvdata(dev);
- int ret;
- ret = zforce_start(ts);
- if (ret)
- return ret;
-
- return 0;
+ return zforce_start(ts);
}
static void zforce_input_close(struct input_dev *dev)