diff options
Diffstat (limited to 'drivers/isdn/gigaset/usb-gigaset.c')
| -rw-r--r-- | drivers/isdn/gigaset/usb-gigaset.c | 949 |
1 files changed, 949 insertions, 0 deletions
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c new file mode 100644 index 000000000..5f306e2ee --- /dev/null +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -0,0 +1,949 @@ +/* + * USB driver for Gigaset 307x directly or using M105 Data. + * + * Copyright (c) 2001 by Stefan Eilers + * and Hansjoerg Lipp <hjlipp@web.de>. + * + * This driver was derived from the USB skeleton driver by + * Greg Kroah-Hartman <greg@kroah.com> + * + * ===================================================================== + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * ===================================================================== + */ + +#include "gigaset.h" +#include <linux/usb.h> +#include <linux/module.h> +#include <linux/moduleparam.h> + +/* Version Information */ +#define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers" +#define DRIVER_DESC "USB Driver for Gigaset 307x using M105" + +/* Module parameters */ + +static int startmode = SM_ISDN; +static int cidmode = 1; + +module_param(startmode, int, S_IRUGO); +module_param(cidmode, int, S_IRUGO); +MODULE_PARM_DESC(startmode, "start in isdn4linux mode"); +MODULE_PARM_DESC(cidmode, "Call-ID mode"); + +#define GIGASET_MINORS 1 +#define GIGASET_MINOR 8 +#define GIGASET_MODULENAME "usb_gigaset" +#define GIGASET_DEVNAME "ttyGU" + +/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */ +#define IF_WRITEBUF 264 + +/* Values for the Gigaset M105 Data */ +#define USB_M105_VENDOR_ID 0x0681 +#define USB_M105_PRODUCT_ID 0x0009 + +/* table of devices that work with this driver */ +static const struct usb_device_id gigaset_table[] = { + { USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, gigaset_table); + +/* + * Control requests (empty fields: 00) + * + * RT|RQ|VALUE|INDEX|LEN |DATA + * In: + * C1 08 01 + * Get flags (1 byte). Bits: 0=dtr,1=rts,3-7:? + * C1 0F ll ll + * Get device information/status (llll: 0x200 and 0x40 seen). + * Real size: I only saw MIN(llll,0x64). + * Contents: seems to be always the same... + * offset 0x00: Length of this structure (0x64) (len: 1,2,3 bytes) + * offset 0x3c: String (16 bit chars): "MCCI USB Serial V2.0" + * rest: ? + * Out: + * 41 11 + * Initialize/reset device ? + * 41 00 xx 00 + * ? (xx=00 or 01; 01 on start, 00 on close) + * 41 07 vv mm + * Set/clear flags vv=value, mm=mask (see RQ 08) + * 41 12 xx + * Used before the following configuration requests are issued + * (with xx=0x0f). I've seen other values<0xf, though. + * 41 01 xx xx + * Set baud rate. xxxx=ceil(0x384000/rate)=trunc(0x383fff/rate)+1. + * 41 03 ps bb + * Set byte size and parity. p: 0x20=even,0x10=odd,0x00=no parity + * [ 0x30: m, 0x40: s ] + * [s: 0: 1 stop bit; 1: 1.5; 2: 2] + * bb: bits/byte (seen 7 and 8) + * 41 13 -- -- -- -- 10 00 ww 00 00 00 xx 00 00 00 yy 00 00 00 zz 00 00 00 + * ?? + * Initialization: 01, 40, 00, 00 + * Open device: 00 40, 00, 00 + * yy and zz seem to be equal, either 0x00 or 0x0a + * (ww,xx) pairs seen: (00,00), (00,40), (01,40), (09,80), (19,80) + * 41 19 -- -- -- -- 06 00 00 00 00 xx 11 13 + * Used after every "configuration sequence" (RQ 12, RQs 01/03/13). + * xx is usually 0x00 but was 0x7e before starting data transfer + * in unimodem mode. So, this might be an array of characters that + * need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S. + * + * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two + * flags per packet. + */ + +/* functions called if a device of this driver is connected/disconnected */ +static int gigaset_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void gigaset_disconnect(struct usb_interface *interface); + +/* functions called before/after suspend */ +static int gigaset_suspend(struct usb_interface *intf, pm_message_t message); +static int gigaset_resume(struct usb_interface *intf); +static int gigaset_pre_reset(struct usb_interface *intf); + +static struct gigaset_driver *driver; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver gigaset_usb_driver = { + .name = GIGASET_MODULENAME, + .probe = gigaset_probe, + .disconnect = gigaset_disconnect, + .id_table = gigaset_table, + .suspend = gigaset_suspend, + .resume = gigaset_resume, + .reset_resume = gigaset_resume, + .pre_reset = gigaset_pre_reset, + .post_reset = gigaset_resume, + .disable_hub_initiated_lpm = 1, +}; + +struct usb_cardstate { + struct usb_device *udev; /* usb device pointer */ + struct usb_interface *interface; /* interface for this device */ + int busy; /* bulk output in progress */ + + /* Output buffer */ + unsigned char *bulk_out_buffer; + int bulk_out_size; + int bulk_out_epnum; + struct urb *bulk_out_urb; + + /* Input buffer */ + unsigned char *rcvbuf; + int rcvbuf_size; + struct urb *read_urb; + + char bchars[6]; /* for request 0x19 */ +}; + +static inline unsigned tiocm_to_gigaset(unsigned state) +{ + return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0); +} + +static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, + unsigned new_state) +{ + struct usb_device *udev = cs->hw.usb->udev; + unsigned mask, val; + int r; + + mask = tiocm_to_gigaset(old_state ^ new_state); + val = tiocm_to_gigaset(new_state); + + gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask); + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41, + (val & 0xff) | ((mask & 0xff) << 8), 0, + NULL, 0, 2000 /* timeout? */); + if (r < 0) + return r; + return 0; +} + +/* + * Set M105 configuration value + * using undocumented device commands reverse engineered from USB traces + * of the Siemens Windows driver + */ +static int set_value(struct cardstate *cs, u8 req, u16 val) +{ + struct usb_device *udev = cs->hw.usb->udev; + int r, r2; + + gig_dbg(DEBUG_USBREQ, "request %02x (%04x)", + (unsigned)req, (unsigned)val); + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x12, 0x41, + 0xf /*?*/, 0, NULL, 0, 2000 /*?*/); + /* no idea what this does */ + if (r < 0) { + dev_err(&udev->dev, "error %d on request 0x12\n", -r); + return r; + } + + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), req, 0x41, + val, 0, NULL, 0, 2000 /*?*/); + if (r < 0) + dev_err(&udev->dev, "error %d on request 0x%02x\n", + -r, (unsigned)req); + + r2 = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41, + 0, 0, cs->hw.usb->bchars, 6, 2000 /*?*/); + if (r2 < 0) + dev_err(&udev->dev, "error %d on request 0x19\n", -r2); + + return r < 0 ? r : (r2 < 0 ? r2 : 0); +} + +/* + * set the baud rate on the internal serial adapter + * using the undocumented parameter setting command + */ +static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) +{ + u16 val; + u32 rate; + + cflag &= CBAUD; + + switch (cflag) { + case B300: rate = 300; break; + case B600: rate = 600; break; + case B1200: rate = 1200; break; + case B2400: rate = 2400; break; + case B4800: rate = 4800; break; + case B9600: rate = 9600; break; + case B19200: rate = 19200; break; + case B38400: rate = 38400; break; + case B57600: rate = 57600; break; + case B115200: rate = 115200; break; + default: + rate = 9600; + dev_err(cs->dev, "unsupported baudrate request 0x%x," + " using default of B9600\n", cflag); + } + + val = 0x383fff / rate + 1; + + return set_value(cs, 1, val); +} + +/* + * set the line format on the internal serial adapter + * using the undocumented parameter setting command + */ +static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) +{ + u16 val = 0; + + /* set the parity */ + if (cflag & PARENB) + val |= (cflag & PARODD) ? 0x10 : 0x20; + + /* set the number of data bits */ + switch (cflag & CSIZE) { + case CS5: + val |= 5 << 8; break; + case CS6: + val |= 6 << 8; break; + case CS7: + val |= 7 << 8; break; + case CS8: + val |= 8 << 8; break; + default: + dev_err(cs->dev, "CSIZE was not CS5-CS8, using default of 8\n"); + val |= 8 << 8; + break; + } + + /* set the number of stop bits */ + if (cflag & CSTOPB) { + if ((cflag & CSIZE) == CS5) + val |= 1; /* 1.5 stop bits */ + else + val |= 2; /* 2 stop bits */ + } + + return set_value(cs, 3, val); +} + + +/*============================================================================*/ +static int gigaset_init_bchannel(struct bc_state *bcs) +{ + /* nothing to do for M10x */ + gigaset_bchannel_up(bcs); + return 0; +} + +static int gigaset_close_bchannel(struct bc_state *bcs) +{ + /* nothing to do for M10x */ + gigaset_bchannel_down(bcs); + return 0; +} + +static int write_modem(struct cardstate *cs); +static int send_cb(struct cardstate *cs); + + +/* Write tasklet handler: Continue sending current skb, or send command, or + * start sending an skb from the send queue. + */ +static void gigaset_modem_fill(unsigned long data) +{ + struct cardstate *cs = (struct cardstate *) data; + struct bc_state *bcs = &cs->bcs[0]; /* only one channel */ + + gig_dbg(DEBUG_OUTPUT, "modem_fill"); + + if (cs->hw.usb->busy) { + gig_dbg(DEBUG_OUTPUT, "modem_fill: busy"); + return; + } + +again: + if (!bcs->tx_skb) { /* no skb is being sent */ + if (cs->cmdbuf) { /* commands to send? */ + gig_dbg(DEBUG_OUTPUT, "modem_fill: cb"); + if (send_cb(cs) < 0) { + gig_dbg(DEBUG_OUTPUT, + "modem_fill: send_cb failed"); + goto again; /* no callback will be called! */ + } + return; + } + + /* skbs to send? */ + bcs->tx_skb = skb_dequeue(&bcs->squeue); + if (!bcs->tx_skb) + return; + + gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)!", + (unsigned long) bcs->tx_skb); + } + + gig_dbg(DEBUG_OUTPUT, "modem_fill: tx_skb"); + if (write_modem(cs) < 0) { + gig_dbg(DEBUG_OUTPUT, "modem_fill: write_modem failed"); + goto again; /* no callback will be called! */ + } +} + +/* + * Interrupt Input URB completion routine + */ +static void gigaset_read_int_callback(struct urb *urb) +{ + struct cardstate *cs = urb->context; + struct inbuf_t *inbuf = cs->inbuf; + int status = urb->status; + int r; + unsigned numbytes; + unsigned char *src; + unsigned long flags; + + if (!status) { + numbytes = urb->actual_length; + + if (numbytes) { + src = cs->hw.usb->rcvbuf; + if (unlikely(*src)) + dev_warn(cs->dev, + "%s: There was no leading 0, but 0x%02x!\n", + __func__, (unsigned) *src); + ++src; /* skip leading 0x00 */ + --numbytes; + if (gigaset_fill_inbuf(inbuf, src, numbytes)) { + gig_dbg(DEBUG_INTR, "%s-->BH", __func__); + gigaset_schedule_event(inbuf->cs); + } + } else + gig_dbg(DEBUG_INTR, "Received zero block length"); + } else { + /* The urb might have been killed. */ + gig_dbg(DEBUG_ANY, "%s - nonzero status received: %d", + __func__, status); + if (status == -ENOENT || status == -ESHUTDOWN) + /* killed or endpoint shutdown: don't resubmit */ + return; + } + + /* resubmit URB */ + spin_lock_irqsave(&cs->lock, flags); + if (!cs->connected) { + spin_unlock_irqrestore(&cs->lock, flags); + pr_err("%s: disconnected\n", __func__); + return; + } + r = usb_submit_urb(urb, GFP_ATOMIC); + spin_unlock_irqrestore(&cs->lock, flags); + if (r) + dev_err(cs->dev, "error %d resubmitting URB\n", -r); +} + + +/* This callback routine is called when data was transmitted to the device. */ +static void gigaset_write_bulk_callback(struct urb *urb) +{ + struct cardstate *cs = urb->context; + int status = urb->status; + unsigned long flags; + + switch (status) { + case 0: /* normal completion */ + break; + case -ENOENT: /* killed */ + gig_dbg(DEBUG_ANY, "%s: killed", __func__); + cs->hw.usb->busy = 0; + return; + default: + dev_err(cs->dev, "bulk transfer failed (status %d)\n", + -status); + /* That's all we can do. Communication problems + are handled by timeouts or network protocols. */ + } + + spin_lock_irqsave(&cs->lock, flags); + if (!cs->connected) { + pr_err("%s: disconnected\n", __func__); + } else { + cs->hw.usb->busy = 0; + tasklet_schedule(&cs->write_tasklet); + } + spin_unlock_irqrestore(&cs->lock, flags); +} + +static int send_cb(struct cardstate *cs) +{ + struct cmdbuf_t *cb = cs->cmdbuf; + unsigned long flags; + int count; + int status = -ENOENT; + struct usb_cardstate *ucs = cs->hw.usb; + + do { + if (!cb->len) { + spin_lock_irqsave(&cs->cmdlock, flags); + cs->cmdbytes -= cs->curlen; + gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left", + cs->curlen, cs->cmdbytes); + cs->cmdbuf = cb->next; + if (cs->cmdbuf) { + cs->cmdbuf->prev = NULL; + cs->curlen = cs->cmdbuf->len; + } else { + cs->lastcmdbuf = NULL; + cs->curlen = 0; + } + spin_unlock_irqrestore(&cs->cmdlock, flags); + + if (cb->wake_tasklet) + tasklet_schedule(cb->wake_tasklet); + kfree(cb); + + cb = cs->cmdbuf; + } + + if (cb) { + count = min(cb->len, ucs->bulk_out_size); + gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count); + + usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev, + usb_sndbulkpipe(ucs->udev, + ucs->bulk_out_epnum), + cb->buf + cb->offset, count, + gigaset_write_bulk_callback, cs); + + cb->offset += count; + cb->len -= count; + ucs->busy = 1; + + spin_lock_irqsave(&cs->lock, flags); + status = cs->connected ? + usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) : + -ENODEV; + spin_unlock_irqrestore(&cs->lock, flags); + + if (status) { + ucs->busy = 0; + dev_err(cs->dev, + "could not submit urb (error %d)\n", + -status); + cb->len = 0; /* skip urb => remove cb+wakeup + in next loop cycle */ + } + } + } while (cb && status); /* next command on error */ + + return status; +} + +/* Send command to device. */ +static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb) +{ + unsigned long flags; + int len; + + gigaset_dbg_buffer(cs->mstate != MS_LOCKED ? + DEBUG_TRANSCMD : DEBUG_LOCKCMD, + "CMD Transmit", cb->len, cb->buf); + + spin_lock_irqsave(&cs->cmdlock, flags); + cb->prev = cs->lastcmdbuf; + if (cs->lastcmdbuf) + cs->lastcmdbuf->next = cb; + else { + cs->cmdbuf = cb; + cs->curlen = cb->len; + } + cs->cmdbytes += cb->len; + cs->lastcmdbuf = cb; + spin_unlock_irqrestore(&cs->cmdlock, flags); + + spin_lock_irqsave(&cs->lock, flags); + len = cb->len; + if (cs->connected) + tasklet_schedule(&cs->write_tasklet); + spin_unlock_irqrestore(&cs->lock, flags); + return len; +} + +static int gigaset_write_room(struct cardstate *cs) +{ + unsigned bytes; + + bytes = cs->cmdbytes; + return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0; +} + +static int gigaset_chars_in_buffer(struct cardstate *cs) +{ + return cs->cmdbytes; +} + +/* + * set the break characters on the internal serial adapter + * using undocumented device commands reverse engineered from USB traces + * of the Siemens Windows driver + */ +static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6]) +{ + struct usb_device *udev = cs->hw.usb->udev; + + gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf); + memcpy(cs->hw.usb->bchars, buf, 6); + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41, + 0, 0, &buf, 6, 2000); +} + +static void gigaset_freebcshw(struct bc_state *bcs) +{ + /* unused */ +} + +/* Initialize the b-channel structure */ +static int gigaset_initbcshw(struct bc_state *bcs) +{ + /* unused */ + bcs->hw.usb = NULL; + return 0; +} + +static void gigaset_reinitbcshw(struct bc_state *bcs) +{ + /* nothing to do for M10x */ +} + +static void gigaset_freecshw(struct cardstate *cs) +{ + tasklet_kill(&cs->write_tasklet); + kfree(cs->hw.usb); +} + +static int gigaset_initcshw(struct cardstate *cs) +{ + struct usb_cardstate *ucs; + + cs->hw.usb = ucs = + kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL); + if (!ucs) { + pr_err("out of memory\n"); + return -ENOMEM; + } + + ucs->bchars[0] = 0; + ucs->bchars[1] = 0; + ucs->bchars[2] = 0; + ucs->bchars[3] = 0; + ucs->bchars[4] = 0x11; + ucs->bchars[5] = 0x13; + ucs->bulk_out_buffer = NULL; + ucs->bulk_out_urb = NULL; + ucs->read_urb = NULL; + tasklet_init(&cs->write_tasklet, + gigaset_modem_fill, (unsigned long) cs); + + return 0; +} + +/* Send data from current skb to the device. */ +static int write_modem(struct cardstate *cs) +{ + int ret = 0; + int count; + struct bc_state *bcs = &cs->bcs[0]; /* only one channel */ + struct usb_cardstate *ucs = cs->hw.usb; + unsigned long flags; + + gig_dbg(DEBUG_OUTPUT, "len: %d...", bcs->tx_skb->len); + + if (!bcs->tx_skb->len) { + dev_kfree_skb_any(bcs->tx_skb); + bcs->tx_skb = NULL; + return -EINVAL; + } + + /* Copy data to bulk out buffer and transmit data */ + count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size); + skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count); + skb_pull(bcs->tx_skb, count); + ucs->busy = 1; + gig_dbg(DEBUG_OUTPUT, "write_modem: send %d bytes", count); + + spin_lock_irqsave(&cs->lock, flags); + if (cs->connected) { + usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev, + usb_sndbulkpipe(ucs->udev, + ucs->bulk_out_epnum), + ucs->bulk_out_buffer, count, + gigaset_write_bulk_callback, cs); + ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC); + } else { + ret = -ENODEV; + } + spin_unlock_irqrestore(&cs->lock, flags); + + if (ret) { + dev_err(cs->dev, "could not submit urb (error %d)\n", -ret); + ucs->busy = 0; + } + + if (!bcs->tx_skb->len) { + /* skb sent completely */ + gigaset_skb_sent(bcs, bcs->tx_skb); + + gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!", + (unsigned long) bcs->tx_skb); + dev_kfree_skb_any(bcs->tx_skb); + bcs->tx_skb = NULL; + } + + return ret; +} + +static int gigaset_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + int retval; + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *hostif = interface->cur_altsetting; + struct cardstate *cs = NULL; + struct usb_cardstate *ucs = NULL; + struct usb_endpoint_descriptor *endpoint; + int buffer_size; + + gig_dbg(DEBUG_ANY, "%s: Check if device matches ...", __func__); + + /* See if the device offered us matches what we can accept */ + if ((le16_to_cpu(udev->descriptor.idVendor) != USB_M105_VENDOR_ID) || + (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID)) { + gig_dbg(DEBUG_ANY, "device ID (0x%x, 0x%x) not for me - skip", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + return -ENODEV; + } + if (hostif->desc.bInterfaceNumber != 0) { + gig_dbg(DEBUG_ANY, "interface %d not for me - skip", + hostif->desc.bInterfaceNumber); + return -ENODEV; + } + if (hostif->desc.bAlternateSetting != 0) { + dev_notice(&udev->dev, "unsupported altsetting %d - skip", + hostif->desc.bAlternateSetting); + return -ENODEV; + } + if (hostif->desc.bInterfaceClass != 255) { + dev_notice(&udev->dev, "unsupported interface class %d - skip", + hostif->desc.bInterfaceClass); + return -ENODEV; + } + + dev_info(&udev->dev, "%s: Device matched ... !\n", __func__); + + /* allocate memory for our device state and initialize it */ + cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME); + if (!cs) + return -ENODEV; + ucs = cs->hw.usb; + + /* save off device structure ptrs for later use */ + usb_get_dev(udev); + ucs->udev = udev; + ucs->interface = interface; + cs->dev = &interface->dev; + + /* save address of controller structure */ + usb_set_intfdata(interface, cs); + + endpoint = &hostif->endpoint[0].desc; + + buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + ucs->bulk_out_size = buffer_size; + ucs->bulk_out_epnum = usb_endpoint_num(endpoint); + ucs->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!ucs->bulk_out_buffer) { + dev_err(cs->dev, "Couldn't allocate bulk_out_buffer\n"); + retval = -ENOMEM; + goto error; + } + + ucs->bulk_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ucs->bulk_out_urb) { + dev_err(cs->dev, "Couldn't allocate bulk_out_urb\n"); + retval = -ENOMEM; + goto error; + } + + endpoint = &hostif->endpoint[1].desc; + + ucs->busy = 0; + + ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ucs->read_urb) { + dev_err(cs->dev, "No free urbs available\n"); + retval = -ENOMEM; + goto error; + } + buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + ucs->rcvbuf_size = buffer_size; + ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL); + if (!ucs->rcvbuf) { + dev_err(cs->dev, "Couldn't allocate rcvbuf\n"); + retval = -ENOMEM; + goto error; + } + /* Fill the interrupt urb and send it to the core */ + usb_fill_int_urb(ucs->read_urb, udev, + usb_rcvintpipe(udev, usb_endpoint_num(endpoint)), + ucs->rcvbuf, buffer_size, + gigaset_read_int_callback, + cs, endpoint->bInterval); + + retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL); + if (retval) { + dev_err(cs->dev, "Could not submit URB (error %d)\n", -retval); + goto error; + } + + /* tell common part that the device is ready */ + if (startmode == SM_LOCKED) + cs->mstate = MS_LOCKED; + + retval = gigaset_start(cs); + if (retval < 0) { + tasklet_kill(&cs->write_tasklet); + goto error; + } + return 0; + +error: + usb_kill_urb(ucs->read_urb); + kfree(ucs->bulk_out_buffer); + usb_free_urb(ucs->bulk_out_urb); + kfree(ucs->rcvbuf); + usb_free_urb(ucs->read_urb); + usb_set_intfdata(interface, NULL); + ucs->read_urb = ucs->bulk_out_urb = NULL; + ucs->rcvbuf = ucs->bulk_out_buffer = NULL; + usb_put_dev(ucs->udev); + ucs->udev = NULL; + ucs->interface = NULL; + gigaset_freecs(cs); + return retval; +} + +static void gigaset_disconnect(struct usb_interface *interface) +{ + struct cardstate *cs; + struct usb_cardstate *ucs; + + cs = usb_get_intfdata(interface); + ucs = cs->hw.usb; + + dev_info(cs->dev, "disconnecting Gigaset USB adapter\n"); + + usb_kill_urb(ucs->read_urb); + + gigaset_stop(cs); + + usb_set_intfdata(interface, NULL); + tasklet_kill(&cs->write_tasklet); + + usb_kill_urb(ucs->bulk_out_urb); + + kfree(ucs->bulk_out_buffer); + usb_free_urb(ucs->bulk_out_urb); + kfree(ucs->rcvbuf); + usb_free_urb(ucs->read_urb); + ucs->read_urb = ucs->bulk_out_urb = NULL; + ucs->rcvbuf = ucs->bulk_out_buffer = NULL; + + usb_put_dev(ucs->udev); + ucs->interface = NULL; + ucs->udev = NULL; + cs->dev = NULL; + gigaset_freecs(cs); +} + +/* gigaset_suspend + * This function is called before the USB connection is suspended or reset. + */ +static int gigaset_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct cardstate *cs = usb_get_intfdata(intf); + + /* stop activity */ + cs->connected = 0; /* prevent rescheduling */ + usb_kill_urb(cs->hw.usb->read_urb); + tasklet_kill(&cs->write_tasklet); + usb_kill_urb(cs->hw.usb->bulk_out_urb); + + gig_dbg(DEBUG_SUSPEND, "suspend complete"); + return 0; +} + +/* gigaset_resume + * This function is called after the USB connection has been resumed or reset. + */ +static int gigaset_resume(struct usb_interface *intf) +{ + struct cardstate *cs = usb_get_intfdata(intf); + int rc; + + /* resubmit interrupt URB */ + cs->connected = 1; + rc = usb_submit_urb(cs->hw.usb->read_urb, GFP_KERNEL); + if (rc) { + dev_err(cs->dev, "Could not submit read URB (error %d)\n", -rc); + return rc; + } + + gig_dbg(DEBUG_SUSPEND, "resume complete"); + return 0; +} + +/* gigaset_pre_reset + * This function is called before the USB connection is reset. + */ +static int gigaset_pre_reset(struct usb_interface *intf) +{ + /* same as suspend */ + return gigaset_suspend(intf, PMSG_ON); +} + +static const struct gigaset_ops ops = { + gigaset_write_cmd, + gigaset_write_room, + gigaset_chars_in_buffer, + gigaset_brkchars, + gigaset_init_bchannel, + gigaset_close_bchannel, + gigaset_initbcshw, + gigaset_freebcshw, + gigaset_reinitbcshw, + gigaset_initcshw, + gigaset_freecshw, + gigaset_set_modem_ctrl, + gigaset_baud_rate, + gigaset_set_line_ctrl, + gigaset_m10x_send_skb, + gigaset_m10x_input, +}; + +/* + * This function is called while kernel-module is loaded + */ +static int __init usb_gigaset_init(void) +{ + int result; + + /* allocate memory for our driver state and initialize it */ + driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS, + GIGASET_MODULENAME, GIGASET_DEVNAME, + &ops, THIS_MODULE); + if (driver == NULL) { + result = -ENOMEM; + goto error; + } + + /* register this driver with the USB subsystem */ + result = usb_register(&gigaset_usb_driver); + if (result < 0) { + pr_err("error %d registering USB driver\n", -result); + goto error; + } + + pr_info(DRIVER_DESC "\n"); + return 0; + +error: + if (driver) + gigaset_freedriver(driver); + driver = NULL; + return result; +} + +/* + * This function is called while unloading the kernel-module + */ +static void __exit usb_gigaset_exit(void) +{ + int i; + + gigaset_blockdriver(driver); /* => probe will fail + * => no gigaset_start any more + */ + + /* stop all connected devices */ + for (i = 0; i < driver->minors; i++) + gigaset_shutdown(driver->cs + i); + + /* from now on, no isdn callback should be possible */ + + /* deregister this driver with the USB subsystem */ + usb_deregister(&gigaset_usb_driver); + /* this will call the disconnect-callback */ + /* from now on, no disconnect/probe callback should be running */ + + gigaset_freedriver(driver); + driver = NULL; +} + + +module_init(usb_gigaset_init); +module_exit(usb_gigaset_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); + +MODULE_LICENSE("GPL"); |