summaryrefslogtreecommitdiff
path: root/drivers/isdn/hisax/bkm_a8.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hisax/bkm_a8.c')
-rw-r--r--drivers/isdn/hisax/bkm_a8.c433
1 files changed, 433 insertions, 0 deletions
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
new file mode 100644
index 000000000..dd663ea57
--- /dev/null
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -0,0 +1,433 @@
+/* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
+ *
+ * low level stuff for Scitel Quadro (4*S0, passive)
+ *
+ * Author Roland Klabunde
+ * Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+
+#include <linux/init.h>
+#include "hisax.h"
+#include "isac.h"
+#include "ipac.h"
+#include "hscx.h"
+#include "isdnl1.h"
+#include <linux/pci.h>
+#include "bkm_ax.h"
+
+#define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */
+
+static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
+
+static const char *sct_quadro_subtypes[] =
+{
+ "",
+ "#1",
+ "#2",
+ "#3",
+ "#4"
+};
+
+
+#define wordout(addr, val) outw(val, addr)
+#define wordin(addr) inw(addr)
+
+static inline u_char
+readreg(unsigned int ale, unsigned int adr, u_char off)
+{
+ register u_char ret;
+ wordout(ale, off);
+ ret = wordin(adr) & 0xFF;
+ return (ret);
+}
+
+static inline void
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
+{
+ int i;
+ wordout(ale, off);
+ for (i = 0; i < size; i++)
+ data[i] = wordin(adr) & 0xFF;
+}
+
+
+static inline void
+writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
+{
+ wordout(ale, off);
+ wordout(adr, data);
+}
+
+static inline void
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
+{
+ int i;
+ wordout(ale, off);
+ for (i = 0; i < size; i++)
+ wordout(adr, data[i]);
+}
+
+/* Interface functions */
+
+static u_char
+ReadISAC(struct IsdnCardState *cs, u_char offset)
+{
+ return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
+}
+
+static void
+WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
+{
+ writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
+}
+
+static void
+ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
+{
+ readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
+}
+
+static void
+WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
+{
+ writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
+}
+
+
+static u_char
+ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
+{
+ return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
+}
+
+static void
+WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
+{
+ writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
+}
+
+/* Set the specific ipac to active */
+static void
+set_ipac_active(struct IsdnCardState *cs, u_int active)
+{
+ /* set irq mask */
+ writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
+ active ? 0xc0 : 0xff);
+}
+
+/*
+ * fast interrupt HSCX stuff goes here
+ */
+
+#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+
+#include "hscx_irq.c"
+
+static irqreturn_t
+bkm_interrupt_ipac(int intno, void *dev_id)
+{
+ struct IsdnCardState *cs = dev_id;
+ u_char ista, val, icnt = 5;
+ u_long flags;
+
+ spin_lock_irqsave(&cs->lock, flags);
+ ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
+ if (!(ista & 0x3f)) { /* not this IPAC */
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return IRQ_NONE;
+ }
+Start_IPAC:
+ if (cs->debug & L1_DEB_IPAC)
+ debugl1(cs, "IPAC ISTA %02X", ista);
+ if (ista & 0x0f) {
+ val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
+ if (ista & 0x01)
+ val |= 0x01;
+ if (ista & 0x04)
+ val |= 0x02;
+ if (ista & 0x08)
+ val |= 0x04;
+ if (val) {
+ hscx_int_main(cs, val);
+ }
+ }
+ if (ista & 0x20) {
+ val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
+ if (val) {
+ isac_interrupt(cs, val);
+ }
+ }
+ if (ista & 0x10) {
+ val = 0x01;
+ isac_interrupt(cs, val);
+ }
+ ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
+ if ((ista & 0x3f) && icnt) {
+ icnt--;
+ goto Start_IPAC;
+ }
+ if (!icnt)
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
+ sct_quadro_subtypes[cs->subtyp]);
+ writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
+ writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void
+release_io_sct_quadro(struct IsdnCardState *cs)
+{
+ release_region(cs->hw.ax.base & 0xffffffc0, 128);
+ if (cs->subtyp == SCT_1)
+ release_region(cs->hw.ax.plx_adr, 64);
+}
+
+static void
+enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
+{
+ if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
+ if (bEnable)
+ wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
+ else
+ wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
+ }
+}
+
+static void
+reset_bkm(struct IsdnCardState *cs)
+{
+ if (cs->subtyp == SCT_1) {
+ wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
+ mdelay(10);
+ /* Remove the soft reset */
+ wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
+ mdelay(10);
+ }
+}
+
+static int
+BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
+{
+ u_long flags;
+
+ switch (mt) {
+ case CARD_RESET:
+ spin_lock_irqsave(&cs->lock, flags);
+ /* Disable ints */
+ set_ipac_active(cs, 0);
+ enable_bkm_int(cs, 0);
+ reset_bkm(cs);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return (0);
+ case CARD_RELEASE:
+ /* Sanity */
+ spin_lock_irqsave(&cs->lock, flags);
+ set_ipac_active(cs, 0);
+ enable_bkm_int(cs, 0);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ release_io_sct_quadro(cs);
+ return (0);
+ case CARD_INIT:
+ spin_lock_irqsave(&cs->lock, flags);
+ cs->debug |= L1_DEB_IPAC;
+ set_ipac_active(cs, 1);
+ inithscxisac(cs, 3);
+ /* Enable ints */
+ enable_bkm_int(cs, 1);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return (0);
+ case CARD_TEST:
+ return (0);
+ }
+ return (0);
+}
+
+static int sct_alloc_io(u_int adr, u_int len)
+{
+ if (!request_region(adr, len, "scitel")) {
+ printk(KERN_WARNING
+ "HiSax: Scitel port %#x-%#x already in use\n",
+ adr, adr + len);
+ return (1);
+ }
+ return (0);
+}
+
+static struct pci_dev *dev_a8 = NULL;
+static u16 sub_vendor_id = 0;
+static u16 sub_sys_id = 0;
+static u_char pci_bus = 0;
+static u_char pci_device_fn = 0;
+static u_char pci_irq = 0;
+
+int setup_sct_quadro(struct IsdnCard *card)
+{
+ struct IsdnCardState *cs = card->cs;
+ char tmp[64];
+ u_int found = 0;
+ u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
+
+ strcpy(tmp, sct_quadro_revision);
+ printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
+ if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
+ cs->subtyp = SCT_1; /* Preset */
+ } else
+ return (0);
+
+ /* Identify subtype by para[0] */
+ if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
+ cs->subtyp = card->para[0];
+ else {
+ printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
+ "subcontroller in configuration, default to 1\n");
+ return (0);
+ }
+ if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
+ (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
+ return (0);
+ if (cs->subtyp == SCT_1) {
+ while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
+ PCI_DEVICE_ID_PLX_9050, dev_a8))) {
+
+ sub_vendor_id = dev_a8->subsystem_vendor;
+ sub_sys_id = dev_a8->subsystem_device;
+ if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
+ (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
+ if (pci_enable_device(dev_a8))
+ return (0);
+ pci_ioaddr1 = pci_resource_start(dev_a8, 1);
+ pci_irq = dev_a8->irq;
+ pci_bus = dev_a8->bus->number;
+ pci_device_fn = dev_a8->devfn;
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+ "Card not found\n",
+ sct_quadro_subtypes[cs->subtyp]);
+ return (0);
+ }
+#ifdef ATTEMPT_PCI_REMAPPING
+/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
+ if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+ "PLX rev 1, remapping required!\n",
+ sct_quadro_subtypes[cs->subtyp]);
+ /* Restart PCI negotiation */
+ pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int)-1);
+ /* Move up by 0x80 byte */
+ pci_ioaddr1 += 0x80;
+ pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
+ pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
+ dev_a8->resource[1].start = pci_ioaddr1;
+ }
+#endif /* End HACK */
+ }
+ if (!pci_irq) { /* IRQ range check ?? */
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
+ sct_quadro_subtypes[cs->subtyp]);
+ return (0);
+ }
+ pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
+ pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
+ pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
+ pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
+ pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
+ if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+ "No IO base address(es)\n",
+ sct_quadro_subtypes[cs->subtyp]);
+ return (0);
+ }
+ pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
+ pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
+ pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
+ pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
+ pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
+ /* Take over */
+ cs->irq = pci_irq;
+ cs->irq_flags |= IRQF_SHARED;
+ /* pci_ioaddr1 is unique to all subdevices */
+ /* pci_ioaddr2 is for the fourth subdevice only */
+ /* pci_ioaddr3 is for the third subdevice only */
+ /* pci_ioaddr4 is for the second subdevice only */
+ /* pci_ioaddr5 is for the first subdevice only */
+ cs->hw.ax.plx_adr = pci_ioaddr1;
+ /* Enter all ipac_base addresses */
+ switch (cs->subtyp) {
+ case 1:
+ cs->hw.ax.base = pci_ioaddr5 + 0x00;
+ if (sct_alloc_io(pci_ioaddr1, 128))
+ return (0);
+ if (sct_alloc_io(pci_ioaddr5, 64))
+ return (0);
+ /* disable all IPAC */
+ writereg(pci_ioaddr5, pci_ioaddr5 + 4,
+ IPAC_MASK, 0xFF);
+ writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
+ IPAC_MASK, 0xFF);
+ writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
+ IPAC_MASK, 0xFF);
+ writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
+ IPAC_MASK, 0xFF);
+ break;
+ case 2:
+ cs->hw.ax.base = pci_ioaddr4 + 0x08;
+ if (sct_alloc_io(pci_ioaddr4, 64))
+ return (0);
+ break;
+ case 3:
+ cs->hw.ax.base = pci_ioaddr3 + 0x10;
+ if (sct_alloc_io(pci_ioaddr3, 64))
+ return (0);
+ break;
+ case 4:
+ cs->hw.ax.base = pci_ioaddr2 + 0x20;
+ if (sct_alloc_io(pci_ioaddr2, 64))
+ return (0);
+ break;
+ }
+ /* For isac and hscx data path */
+ cs->hw.ax.data_adr = cs->hw.ax.base + 4;
+
+ printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
+ "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
+ sct_quadro_subtypes[cs->subtyp],
+ cs->hw.ax.plx_adr,
+ cs->hw.ax.base,
+ cs->hw.ax.data_adr,
+ cs->irq);
+
+ test_and_set_bit(HW_IPAC, &cs->HW_Flags);
+
+ cs->readisac = &ReadISAC;
+ cs->writeisac = &WriteISAC;
+ cs->readisacfifo = &ReadISACfifo;
+ cs->writeisacfifo = &WriteISACfifo;
+
+ cs->BC_Read_Reg = &ReadHSCX;
+ cs->BC_Write_Reg = &WriteHSCX;
+ cs->BC_Send_Data = &hscx_fill_fifo;
+ cs->cardmsg = &BKM_card_msg;
+ cs->irq_func = &bkm_interrupt_ipac;
+
+ printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
+ sct_quadro_subtypes[cs->subtyp],
+ readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
+ return (1);
+}