summaryrefslogtreecommitdiff
path: root/drivers/isdn/hysdn/boardergo.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hysdn/boardergo.c')
-rw-r--r--drivers/isdn/hysdn/boardergo.c445
1 files changed, 445 insertions, 0 deletions
diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c
new file mode 100644
index 000000000..2aa2a0e08
--- /dev/null
+++ b/drivers/isdn/hysdn/boardergo.c
@@ -0,0 +1,445 @@
+/* $Id: boardergo.c,v 1.5.6.7 2001/11/06 21:58:19 kai Exp $
+ *
+ * Linux driver for HYSDN cards, specific routines for ergo type boards.
+ *
+ * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH
+ * Copyright 1999 by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same
+ * DPRAM interface and layout with only minor differences all related
+ * stuff is done here, not in separate modules.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hysdn_defs.h"
+#include "boardergo.h"
+
+#define byteout(addr, val) outb(val, addr)
+#define bytein(addr) inb(addr)
+
+/***************************************************/
+/* The cards interrupt handler. Called from system */
+/***************************************************/
+static irqreturn_t
+ergo_interrupt(int intno, void *dev_id)
+{
+ hysdn_card *card = dev_id; /* parameter from irq */
+ tErgDpram *dpr;
+ unsigned long flags;
+ unsigned char volatile b;
+
+ if (!card)
+ return IRQ_NONE; /* error -> spurious interrupt */
+ if (!card->irq_enabled)
+ return IRQ_NONE; /* other device interrupting or irq switched off */
+
+ spin_lock_irqsave(&card->hysdn_lock, flags); /* no further irqs allowed */
+
+ if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) {
+ spin_unlock_irqrestore(&card->hysdn_lock, flags); /* restore old state */
+ return IRQ_NONE; /* no interrupt requested by E1 */
+ }
+ /* clear any pending ints on the board */
+ dpr = card->dpram;
+ b = dpr->ToPcInt; /* clear for ergo */
+ b |= dpr->ToPcIntMetro; /* same for metro */
+ b |= dpr->ToHyInt; /* and for champ */
+
+ /* start kernel task immediately after leaving all interrupts */
+ if (!card->hw_lock)
+ schedule_work(&card->irq_queue);
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ return IRQ_HANDLED;
+} /* ergo_interrupt */
+
+/******************************************************************************/
+/* ergo_irq_bh will be called as part of the kernel clearing its shared work */
+/* queue sometime after a call to schedule_work has been made passing our */
+/* work_struct. This task is the only one handling data transfer from or to */
+/* the card after booting. The task may be queued from everywhere */
+/* (interrupts included). */
+/******************************************************************************/
+static void
+ergo_irq_bh(struct work_struct *ugli_api)
+{
+ hysdn_card *card = container_of(ugli_api, hysdn_card, irq_queue);
+ tErgDpram *dpr;
+ int again;
+ unsigned long flags;
+
+ if (card->state != CARD_STATE_RUN)
+ return; /* invalid call */
+
+ dpr = card->dpram; /* point to DPRAM */
+
+ spin_lock_irqsave(&card->hysdn_lock, flags);
+ if (card->hw_lock) {
+ spin_unlock_irqrestore(&card->hysdn_lock, flags); /* hardware currently unavailable */
+ return;
+ }
+ card->hw_lock = 1; /* we now lock the hardware */
+
+ do {
+ again = 0; /* assume loop not to be repeated */
+
+ if (!dpr->ToHyFlag) {
+ /* we are able to send a buffer */
+
+ if (hysdn_sched_tx(card, dpr->ToHyBuf, &dpr->ToHySize, &dpr->ToHyChannel,
+ ERG_TO_HY_BUF_SIZE)) {
+ dpr->ToHyFlag = 1; /* enable tx */
+ again = 1; /* restart loop */
+ }
+ } /* we are able to send a buffer */
+ if (dpr->ToPcFlag) {
+ /* a message has arrived for us, handle it */
+
+ if (hysdn_sched_rx(card, dpr->ToPcBuf, dpr->ToPcSize, dpr->ToPcChannel)) {
+ dpr->ToPcFlag = 0; /* we worked the data */
+ again = 1; /* restart loop */
+ }
+ } /* a message has arrived for us */
+ if (again) {
+ dpr->ToHyInt = 1;
+ dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
+ } else
+ card->hw_lock = 0; /* free hardware again */
+ } while (again); /* until nothing more to do */
+
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
+} /* ergo_irq_bh */
+
+
+/*********************************************************/
+/* stop the card (hardware reset) and disable interrupts */
+/*********************************************************/
+static void
+ergo_stopcard(hysdn_card *card)
+{
+ unsigned long flags;
+ unsigned char val;
+
+ hysdn_net_release(card); /* first release the net device if existing */
+#ifdef CONFIG_HYSDN_CAPI
+ hycapi_capi_stop(card);
+#endif /* CONFIG_HYSDN_CAPI */
+ spin_lock_irqsave(&card->hysdn_lock, flags);
+ val = bytein(card->iobase + PCI9050_INTR_REG); /* get actual value */
+ val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1); /* mask irq */
+ byteout(card->iobase + PCI9050_INTR_REG, val);
+ card->irq_enabled = 0;
+ byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET); /* reset E1 processor */
+ card->state = CARD_STATE_UNUSED;
+ card->err_log_state = ERRLOG_STATE_OFF; /* currently no log active */
+
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
+} /* ergo_stopcard */
+
+/**************************************************************************/
+/* enable or disable the cards error log. The event is queued if possible */
+/**************************************************************************/
+static void
+ergo_set_errlog_state(hysdn_card *card, int on)
+{
+ unsigned long flags;
+
+ if (card->state != CARD_STATE_RUN) {
+ card->err_log_state = ERRLOG_STATE_OFF; /* must be off */
+ return;
+ }
+ spin_lock_irqsave(&card->hysdn_lock, flags);
+
+ if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) ||
+ ((card->err_log_state == ERRLOG_STATE_ON) && on)) {
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ return; /* nothing to do */
+ }
+ if (on)
+ card->err_log_state = ERRLOG_STATE_START; /* request start */
+ else
+ card->err_log_state = ERRLOG_STATE_STOP; /* request stop */
+
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ schedule_work(&card->irq_queue);
+} /* ergo_set_errlog_state */
+
+/******************************************/
+/* test the cards RAM and return 0 if ok. */
+/******************************************/
+static const char TestText[36] = "This Message is filler, why read it";
+
+static int
+ergo_testram(hysdn_card *card)
+{
+ tErgDpram *dpr = card->dpram;
+
+ memset(dpr->TrapTable, 0, sizeof(dpr->TrapTable)); /* clear all Traps */
+ dpr->ToHyInt = 1; /* E1 INTR state forced */
+
+ memcpy(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
+ sizeof(TestText));
+ if (memcmp(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
+ sizeof(TestText)))
+ return (-1);
+
+ memcpy(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
+ sizeof(TestText));
+ if (memcmp(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
+ sizeof(TestText)))
+ return (-1);
+
+ return (0);
+} /* ergo_testram */
+
+/*****************************************************************************/
+/* this function is intended to write stage 1 boot image to the cards buffer */
+/* this is done in two steps. First the 1024 hi-words are written (offs=0), */
+/* then the 1024 lo-bytes are written. The remaining DPRAM is cleared, the */
+/* PCI-write-buffers flushed and the card is taken out of reset. */
+/* The function then waits for a reaction of the E1 processor or a timeout. */
+/* Negative return values are interpreted as errors. */
+/*****************************************************************************/
+static int
+ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf,
+ unsigned long offs)
+{
+ unsigned char *dst;
+ tErgDpram *dpram;
+ int cnt = (BOOT_IMG_SIZE >> 2); /* number of words to move and swap (byte order!) */
+
+ if (card->debug_flags & LOG_POF_CARD)
+ hysdn_addlog(card, "ERGO: write bootldr offs=0x%lx ", offs);
+
+ dst = card->dpram; /* pointer to start of DPRAM */
+ dst += (offs + ERG_DPRAM_FILL_SIZE); /* offset in the DPRAM */
+ while (cnt--) {
+ *dst++ = *(buf + 1); /* high byte */
+ *dst++ = *buf; /* low byte */
+ dst += 2; /* point to next longword */
+ buf += 2; /* buffer only filled with words */
+ }
+
+ /* if low words (offs = 2) have been written, clear the rest of the DPRAM, */
+ /* flush the PCI-write-buffer and take the E1 out of reset */
+ if (offs) {
+ memset(card->dpram, 0, ERG_DPRAM_FILL_SIZE); /* fill the DPRAM still not cleared */
+ dpram = card->dpram; /* get pointer to dpram structure */
+ dpram->ToHyNoDpramErrLog = 0xFF; /* write a dpram register */
+ while (!dpram->ToHyNoDpramErrLog); /* reread volatile register to flush PCI */
+
+ byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN); /* start E1 processor */
+ /* the interrupts are still masked */
+
+ msleep_interruptible(20); /* Timeout 20ms */
+
+ if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
+ if (card->debug_flags & LOG_POF_CARD)
+ hysdn_addlog(card, "ERGO: write bootldr no answer");
+ return (-ERR_BOOTIMG_FAIL);
+ }
+ } /* start_boot_img */
+ return (0); /* successful */
+} /* ergo_writebootimg */
+
+/********************************************************************************/
+/* ergo_writebootseq writes the buffer containing len bytes to the E1 processor */
+/* using the boot spool mechanism. If everything works fine 0 is returned. In */
+/* case of errors a negative error value is returned. */
+/********************************************************************************/
+static int
+ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len)
+{
+ tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram;
+ unsigned char *dst;
+ unsigned char buflen;
+ int nr_write;
+ unsigned char tmp_rdptr;
+ unsigned char wr_mirror;
+ int i;
+
+ if (card->debug_flags & LOG_POF_CARD)
+ hysdn_addlog(card, "ERGO: write boot seq len=%d ", len);
+
+ dst = sp->Data; /* point to data in spool structure */
+ buflen = sp->Len; /* maximum len of spooled data */
+ wr_mirror = sp->WrPtr; /* only once read */
+
+ /* try until all bytes written or error */
+ i = 0x1000; /* timeout value */
+ while (len) {
+
+ /* first determine the number of bytes that may be buffered */
+ do {
+ tmp_rdptr = sp->RdPtr; /* first read the pointer */
+ i--; /* decrement timeout */
+ } while (i && (tmp_rdptr != sp->RdPtr)); /* wait for stable pointer */
+
+ if (!i) {
+ if (card->debug_flags & LOG_POF_CARD)
+ hysdn_addlog(card, "ERGO: write boot seq timeout");
+ return (-ERR_BOOTSEQ_FAIL); /* value not stable -> timeout */
+ }
+ if ((nr_write = tmp_rdptr - wr_mirror - 1) < 0)
+ nr_write += buflen; /* now we got number of free bytes - 1 in buffer */
+
+ if (!nr_write)
+ continue; /* no free bytes in buffer */
+
+ if (nr_write > len)
+ nr_write = len; /* limit if last few bytes */
+ i = 0x1000; /* reset timeout value */
+
+ /* now we know how much bytes we may put in the puffer */
+ len -= nr_write; /* we savely could adjust len before output */
+ while (nr_write--) {
+ *(dst + wr_mirror) = *buf++; /* output one byte */
+ if (++wr_mirror >= buflen)
+ wr_mirror = 0;
+ sp->WrPtr = wr_mirror; /* announce the next byte to E1 */
+ } /* while (nr_write) */
+
+ } /* while (len) */
+ return (0);
+} /* ergo_writebootseq */
+
+/***********************************************************************************/
+/* ergo_waitpofready waits for a maximum of 10 seconds for the completition of the */
+/* boot process. If the process has been successful 0 is returned otherwise a */
+/* negative error code is returned. */
+/***********************************************************************************/
+static int
+ergo_waitpofready(struct HYSDN_CARD *card)
+{
+ tErgDpram *dpr = card->dpram; /* pointer to DPRAM structure */
+ int timecnt = 10000 / 50; /* timeout is 10 secs max. */
+ unsigned long flags;
+ int msg_size;
+ int i;
+
+ if (card->debug_flags & LOG_POF_CARD)
+ hysdn_addlog(card, "ERGO: waiting for pof ready");
+ while (timecnt--) {
+ /* wait until timeout */
+
+ if (dpr->ToPcFlag) {
+ /* data has arrived */
+
+ if ((dpr->ToPcChannel != CHAN_SYSTEM) ||
+ (dpr->ToPcSize < MIN_RDY_MSG_SIZE) ||
+ (dpr->ToPcSize > MAX_RDY_MSG_SIZE) ||
+ ((*(unsigned long *) dpr->ToPcBuf) != RDY_MAGIC))
+ break; /* an error occurred */
+
+ /* Check for additional data delivered during SysReady */
+ msg_size = dpr->ToPcSize - RDY_MAGIC_SIZE;
+ if (msg_size > 0)
+ if (EvalSysrTokData(card, dpr->ToPcBuf + RDY_MAGIC_SIZE, msg_size))
+ break;
+
+ if (card->debug_flags & LOG_POF_RECORD)
+ hysdn_addlog(card, "ERGO: pof boot success");
+ spin_lock_irqsave(&card->hysdn_lock, flags);
+
+ card->state = CARD_STATE_RUN; /* now card is running */
+ /* enable the cards interrupt */
+ byteout(card->iobase + PCI9050_INTR_REG,
+ bytein(card->iobase + PCI9050_INTR_REG) |
+ (PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1));
+ card->irq_enabled = 1; /* we are ready to receive interrupts */
+
+ dpr->ToPcFlag = 0; /* reset data indicator */
+ dpr->ToHyInt = 1;
+ dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
+
+ spin_unlock_irqrestore(&card->hysdn_lock, flags);
+ if ((hynet_enable & (1 << card->myid))
+ && (i = hysdn_net_create(card)))
+ {
+ ergo_stopcard(card);
+ card->state = CARD_STATE_BOOTERR;
+ return (i);
+ }
+#ifdef CONFIG_HYSDN_CAPI
+ if ((i = hycapi_capi_create(card))) {
+ printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n");
+ }
+#endif /* CONFIG_HYSDN_CAPI */
+ return (0); /* success */
+ } /* data has arrived */
+ msleep_interruptible(50); /* Timeout 50ms */
+ } /* wait until timeout */
+
+ if (card->debug_flags & LOG_POF_CARD)
+ hysdn_addlog(card, "ERGO: pof boot ready timeout");
+ return (-ERR_POF_TIMEOUT);
+} /* ergo_waitpofready */
+
+
+
+/************************************************************************************/
+/* release the cards hardware. Before releasing do a interrupt disable and hardware */
+/* reset. Also unmap dpram. */
+/* Use only during module release. */
+/************************************************************************************/
+static void
+ergo_releasehardware(hysdn_card *card)
+{
+ ergo_stopcard(card); /* first stop the card if not already done */
+ free_irq(card->irq, card); /* release interrupt */
+ release_region(card->iobase + PCI9050_INTR_REG, 1); /* release all io ports */
+ release_region(card->iobase + PCI9050_USER_IO, 1);
+ iounmap(card->dpram);
+ card->dpram = NULL; /* release shared mem */
+} /* ergo_releasehardware */
+
+
+/*********************************************************************************/
+/* acquire the needed hardware ports and map dpram. If an error occurs a nonzero */
+/* value is returned. */
+/* Use only during module init. */
+/*********************************************************************************/
+int
+ergo_inithardware(hysdn_card *card)
+{
+ if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN"))
+ return (-1);
+ if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) {
+ release_region(card->iobase + PCI9050_INTR_REG, 1);
+ return (-1); /* ports already in use */
+ }
+ card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1;
+ if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) {
+ release_region(card->iobase + PCI9050_INTR_REG, 1);
+ release_region(card->iobase + PCI9050_USER_IO, 1);
+ return (-1);
+ }
+
+ ergo_stopcard(card); /* disable interrupts */
+ if (request_irq(card->irq, ergo_interrupt, IRQF_SHARED, "HYSDN", card)) {
+ ergo_releasehardware(card); /* return the acquired hardware */
+ return (-1);
+ }
+ /* success, now setup the function pointers */
+ card->stopcard = ergo_stopcard;
+ card->releasehardware = ergo_releasehardware;
+ card->testram = ergo_testram;
+ card->writebootimg = ergo_writebootimg;
+ card->writebootseq = ergo_writebootseq;
+ card->waitpofready = ergo_waitpofready;
+ card->set_errlog_state = ergo_set_errlog_state;
+ INIT_WORK(&card->irq_queue, ergo_irq_bh);
+ spin_lock_init(&card->hysdn_lock);
+
+ return (0);
+} /* ergo_inithardware */