diff options
Diffstat (limited to 'drivers/leds/Kconfig')
-rw-r--r-- | drivers/leds/Kconfig | 60 |
1 files changed, 56 insertions, 4 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 966b9605f..9ad35f72a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -11,9 +11,6 @@ menuconfig NEW_LEDS Say Y to enable Linux LED support. This allows control of supported LEDs from both userspace and optionally, by kernel events (triggers). - This is not related to standard keyboard LEDs which are controlled - via the input system. - if NEW_LEDS config LEDS_CLASS @@ -42,6 +39,32 @@ config LEDS_88PM860X This option enables support for on-chip LED drivers found on Marvell Semiconductor 88PM8606 PMIC. +config LEDS_AAT1290 + tristate "LED support for the AAT1290" + depends on LEDS_CLASS_FLASH + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS + depends on GPIOLIB + depends on OF + depends on PINCTRL + help + This option enables support for the LEDs on the AAT1290. + +config LEDS_BCM6328 + tristate "LED Support for Broadcom BCM6328" + depends on LEDS_CLASS + depends on OF + help + This option enables support for LEDs connected to the BCM6328 + LED HW controller accessed via MMIO registers. + +config LEDS_BCM6358 + tristate "LED Support for Broadcom BCM6358" + depends on LEDS_CLASS + depends on OF + help + This option enables support for LEDs connected to the BCM6358 + LED HW controller accessed via MMIO registers. + config LEDS_LM3530 tristate "LCD Backlight driver for LM3530" depends on LEDS_CLASS @@ -182,7 +205,7 @@ config LEDS_PCA9532_GPIO config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs @@ -206,6 +229,7 @@ config LEDS_LP55XX_COMMON tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 select FW_LOADER + select FW_LOADER_USER_HELPER_FALLBACK help This option supports common operations for LP5521/5523/55231/5562/8501 devices. @@ -467,6 +491,25 @@ config LEDS_TCA6507 LED driver chips accessed via the I2C bus. Driver support brightness control and hardware-assisted blinking. +config LEDS_TLC591XX + tristate "LED driver for TLC59108 and TLC59116 controllers" + depends on LEDS_CLASS && I2C + select REGMAP_I2C + help + This option enables support for Texas Instruments TLC59108 + and TLC59116 LED controllers. + +config LEDS_MAX77693 + tristate "LED support for MAX77693 Flash" + depends on LEDS_CLASS_FLASH + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS + depends on MFD_MAX77693 + depends on OF + help + This option enables support for the flash part of the MAX77693 + multifunction device. It has build in control for two leds in flash + and torch mode. + config LEDS_MAX8997 tristate "LED support for MAX8997 PMIC" depends on LEDS_CLASS && MFD_MAX8997 @@ -498,6 +541,15 @@ config LEDS_MENF21BMC This driver can also be built as a module. If so the module will be called leds-menf21bmc. +config LEDS_KTD2692 + tristate "LED support for KTD2692 flash LED controller" + depends on LEDS_CLASS_FLASH && GPIOLIB && OF + help + This option enables support for KTD2692 LED flash connected + through ExpressWire interface. + + Say Y to enable this driver. + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" config LEDS_BLINKM |