diff options
Diffstat (limited to 'drivers/media/common/b2c2')
-rw-r--r-- | drivers/media/common/b2c2/Kconfig | 1 | ||||
-rw-r--r-- | drivers/media/common/b2c2/flexcop-common.h | 1 | ||||
-rw-r--r-- | drivers/media/common/b2c2/flexcop-fe-tuner.c | 63 | ||||
-rw-r--r-- | drivers/media/common/b2c2/flexcop-hw-filter.c | 16 | ||||
-rw-r--r-- | drivers/media/common/b2c2/flexcop-misc.c | 1 | ||||
-rw-r--r-- | drivers/media/common/b2c2/flexcop-reg.h | 1 |
6 files changed, 71 insertions, 12 deletions
diff --git a/drivers/media/common/b2c2/Kconfig b/drivers/media/common/b2c2/Kconfig index a8c6cdfaa..e5936380b 100644 --- a/drivers/media/common/b2c2/Kconfig +++ b/drivers/media/common/b2c2/Kconfig @@ -14,6 +14,7 @@ config DVB_B2C2_FLEXCOP select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT select DVB_TUNER_ITD1000 if MEDIA_SUBDRV_AUTOSELECT select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24120 if MEDIA_SUBDRV_AUTOSELECT select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT select DVB_TUNER_CX24113 if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/common/b2c2/flexcop-common.h b/drivers/media/common/b2c2/flexcop-common.h index 437912e49..2b2460e9e 100644 --- a/drivers/media/common/b2c2/flexcop-common.h +++ b/drivers/media/common/b2c2/flexcop-common.h @@ -91,6 +91,7 @@ struct flexcop_device { int feedcount; int pid_filtering; int fullts_streaming_state; + int skip_6_hw_pid_filter; /* bus specific callbacks */ flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *, diff --git a/drivers/media/common/b2c2/flexcop-fe-tuner.c b/drivers/media/common/b2c2/flexcop-fe-tuner.c index 7415aec33..d8c0b6277 100644 --- a/drivers/media/common/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/common/b2c2/flexcop-fe-tuner.c @@ -12,6 +12,7 @@ #include "cx24113.h" #include "cx24123.h" #include "isl6421.h" +#include "cx24120.h" #include "mt352.h" #include "bcm3510.h" #include "nxt200x.h" @@ -26,9 +27,20 @@ #define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \ (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE))) +#if FE_SUPPORTED(BCM3510) || (FE_SUPPORTED(CX24120) && FE_SUPPORTED(ISL6421)) +static int flexcop_fe_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct flexcop_device *fc = fe->dvb->priv; + + return reject_firmware(fw, name, fc->dev); +} +#endif + /* lnb control */ #if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299) -static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +static int flexcop_set_voltage(struct dvb_frontend *fe, + enum fe_sec_voltage voltage) { struct flexcop_device *fc = fe->dvb->priv; flexcop_ibi_value v; @@ -67,7 +79,7 @@ static int flexcop_sleep(struct dvb_frontend* fe) /* SkyStar2 DVB-S rev 2.3 */ #if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL) -static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +static int flexcop_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone) { /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ struct flexcop_device *fc = fe->dvb->priv; @@ -146,7 +158,7 @@ static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe, } static int flexcop_diseqc_send_burst(struct dvb_frontend *fe, - fe_sec_mini_cmd_t minicmd) + enum fe_sec_mini_cmd minicmd) { return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); } @@ -445,13 +457,6 @@ static int airstar_dvbt_attach(struct flexcop_device *fc, /* AirStar ATSC 1st generation */ #if FE_SUPPORTED(BCM3510) -static int flexcop_fe_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char* name) -{ - struct flexcop_device *fc = fe->dvb->priv; - return reject_firmware(fw, name, fc->dev); -} - static struct bcm3510_config air2pc_atsc_first_gen_config = { .demod_address = 0x0f, .request_firmware = flexcop_fe_request_firmware, @@ -619,6 +624,43 @@ fail: #define cablestar2_attach NULL #endif +/* SkyStar S2 PCI DVB-S/S2 card based on Conexant cx24120/cx24118 */ +#if FE_SUPPORTED(CX24120) && FE_SUPPORTED(ISL6421) +static const struct cx24120_config skystar2_rev3_3_cx24120_config = { + .i2c_addr = 0x55, + .xtal_khz = 10111, + .initial_mpeg_config = { 0xa1, 0x76, 0x07 }, + .request_firmware = flexcop_fe_request_firmware, + .i2c_wr_max = 4, +}; + +static int skystarS2_rev33_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(cx24120_attach, + &skystar2_rev3_3_cx24120_config, i2c); + if (!fc->fe) + return 0; + + fc->dev_type = FC_SKYS2_REV33; + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 0, 0, false)) { + err("ISL6421 could NOT be attached!"); + fc->fc_i2c_adap[2].no_base_addr = 0; + return 0; + } + info("ISL6421 successfully attached."); + + if (fc->has_32_hw_pid_filter) + fc->skip_6_hw_pid_filter = 1; + + return 1; +} +#else +#define skystarS2_rev33_attach NULL +#endif + static struct { flexcop_device_type_t type; int (*attach)(struct flexcop_device *, struct i2c_adapter *); @@ -632,6 +674,7 @@ static struct { { FC_AIR_ATSC1, airstar_atsc1_attach }, { FC_CABLE, cablestar2_attach }, { FC_SKY_REV23, skystar2_rev23_attach }, + { FC_SKYS2_REV33, skystarS2_rev33_attach }, }; /* try to figure out the frontend */ diff --git a/drivers/media/common/b2c2/flexcop-hw-filter.c b/drivers/media/common/b2c2/flexcop-hw-filter.c index 77e45475f..822025790 100644 --- a/drivers/media/common/b2c2/flexcop-hw-filter.c +++ b/drivers/media/common/b2c2/flexcop-hw-filter.c @@ -117,6 +117,10 @@ static void flexcop_pid_control(struct flexcop_device *fc, deb_ts("setting pid: %5d %04x at index %d '%s'\n", pid, pid, index, onoff ? "on" : "off"); + /* First 6 can be buggy - skip over them if option set */ + if (fc->skip_6_hw_pid_filter) + index += 6; + /* We could use bit magic here to reduce source code size. * I decided against it, but to use the real register names */ switch (index) { @@ -170,7 +174,10 @@ static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc, int onoff) int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff) { - int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32; + int max_pid_filter = 6; + + max_pid_filter -= 6 * fc->skip_6_hw_pid_filter; + max_pid_filter += 32 * fc->has_32_hw_pid_filter; fc->feedcount += onoff ? 1 : -1; /* the number of PIDs/Feed currently requested */ if (dvbdmxfeed->index >= max_pid_filter) @@ -217,7 +224,12 @@ void flexcop_hw_filter_init(struct flexcop_device *fc) { int i; flexcop_ibi_value v; - for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++) + int max_pid_filter = 6; + + max_pid_filter -= 6 * fc->skip_6_hw_pid_filter; + max_pid_filter += 32 * fc->has_32_hw_pid_filter; + + for (i = 0; i < max_pid_filter; i++) flexcop_pid_control(fc, i, 0x1fff, 0); flexcop_pid_group_filter(fc, 0, 0x1fe0); diff --git a/drivers/media/common/b2c2/flexcop-misc.c b/drivers/media/common/b2c2/flexcop-misc.c index f06f3a907..b8eff2353 100644 --- a/drivers/media/common/b2c2/flexcop-misc.c +++ b/drivers/media/common/b2c2/flexcop-misc.c @@ -56,6 +56,7 @@ static const char *flexcop_device_names[] = { [FC_SKY_REV26] = "Sky2PC/SkyStar 2 DVB-S rev 2.6", [FC_SKY_REV27] = "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", [FC_SKY_REV28] = "Sky2PC/SkyStar 2 DVB-S rev 2.8", + [FC_SKYS2_REV33] = "Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3", }; static const char *flexcop_bus_names[] = { diff --git a/drivers/media/common/b2c2/flexcop-reg.h b/drivers/media/common/b2c2/flexcop-reg.h index dc4528dcb..835c54d60 100644 --- a/drivers/media/common/b2c2/flexcop-reg.h +++ b/drivers/media/common/b2c2/flexcop-reg.h @@ -24,6 +24,7 @@ typedef enum { FC_SKY_REV26, FC_SKY_REV27, FC_SKY_REV28, + FC_SKYS2_REV33, } flexcop_device_type_t; typedef enum { |