summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends/dib0090.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb-frontends/dib0090.c')
-rw-r--r--drivers/media/dvb-frontends/dib0090.c2677
1 files changed, 2677 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/dib0090.c b/drivers/media/dvb-frontends/dib0090.c
new file mode 100644
index 000000000..68e2af265
--- /dev/null
+++ b/drivers/media/dvb-frontends/dib0090.c
@@ -0,0 +1,2677 @@
+/*
+ * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner.
+ *
+ * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * This code is more or less generated from another driver, please
+ * excuse some codingstyle oddities.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+#include "dvb_frontend.h"
+
+#include "dib0090.h"
+#include "dibx000_common.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { \
+ if (debug) { \
+ printk(KERN_DEBUG "DiB0090: "); \
+ printk(args); \
+ printk("\n"); \
+ } \
+} while (0)
+
+#define CONFIG_SYS_DVBT
+#define CONFIG_SYS_ISDBT
+#define CONFIG_BAND_CBAND
+#define CONFIG_BAND_VHF
+#define CONFIG_BAND_UHF
+#define CONFIG_DIB0090_USE_PWM_AGC
+
+#define EN_LNA0 0x8000
+#define EN_LNA1 0x4000
+#define EN_LNA2 0x2000
+#define EN_LNA3 0x1000
+#define EN_MIX0 0x0800
+#define EN_MIX1 0x0400
+#define EN_MIX2 0x0200
+#define EN_MIX3 0x0100
+#define EN_IQADC 0x0040
+#define EN_PLL 0x0020
+#define EN_TX 0x0010
+#define EN_BB 0x0008
+#define EN_LO 0x0004
+#define EN_BIAS 0x0001
+
+#define EN_IQANA 0x0002
+#define EN_DIGCLK 0x0080 /* not in the 0x24 reg, only in 0x1b */
+#define EN_CRYSTAL 0x0002
+
+#define EN_UHF 0x22E9
+#define EN_VHF 0x44E9
+#define EN_LBD 0x11E9
+#define EN_SBD 0x44E9
+#define EN_CAB 0x88E9
+
+/* Calibration defines */
+#define DC_CAL 0x1
+#define WBD_CAL 0x2
+#define TEMP_CAL 0x4
+#define CAPTRIM_CAL 0x8
+
+#define KROSUS_PLL_LOCKED 0x800
+#define KROSUS 0x2
+
+/* Use those defines to identify SOC version */
+#define SOC 0x02
+#define SOC_7090_P1G_11R1 0x82
+#define SOC_7090_P1G_21R1 0x8a
+#define SOC_8090_P1G_11R1 0x86
+#define SOC_8090_P1G_21R1 0x8e
+
+/* else use thos ones to check */
+#define P1A_B 0x0
+#define P1C 0x1
+#define P1D_E_F 0x3
+#define P1G 0x7
+#define P1G_21R2 0xf
+
+#define MP001 0x1 /* Single 9090/8096 */
+#define MP005 0x4 /* Single Sband */
+#define MP008 0x6 /* Dual diversity VHF-UHF-LBAND */
+#define MP009 0x7 /* Dual diversity 29098 CBAND-UHF-LBAND-SBAND */
+
+#define pgm_read_word(w) (*w)
+
+struct dc_calibration;
+
+struct dib0090_tuning {
+ u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
+ u8 switch_trim;
+ u8 lna_tune;
+ u16 lna_bias;
+ u16 v2i;
+ u16 mix;
+ u16 load;
+ u16 tuner_enable;
+};
+
+struct dib0090_pll {
+ u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
+ u8 vco_band;
+ u8 hfdiv_code;
+ u8 hfdiv;
+ u8 topresc;
+};
+
+struct dib0090_identity {
+ u8 version;
+ u8 product;
+ u8 p1g;
+ u8 in_soc;
+};
+
+struct dib0090_state {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend *fe;
+ const struct dib0090_config *config;
+
+ u8 current_band;
+ enum frontend_tune_state tune_state;
+ u32 current_rf;
+
+ u16 wbd_offset;
+ s16 wbd_target; /* in dB */
+
+ s16 rf_gain_limit; /* take-over-point: where to split between bb and rf gain */
+ s16 current_gain; /* keeps the currently programmed gain */
+ u8 agc_step; /* new binary search */
+
+ u16 gain[2]; /* for channel monitoring */
+
+ const u16 *rf_ramp;
+ const u16 *bb_ramp;
+
+ /* for the software AGC ramps */
+ u16 bb_1_def;
+ u16 rf_lt_def;
+ u16 gain_reg[4];
+
+ /* for the captrim/dc-offset search */
+ s8 step;
+ s16 adc_diff;
+ s16 min_adc_diff;
+
+ s8 captrim;
+ s8 fcaptrim;
+
+ const struct dc_calibration *dc;
+ u16 bb6, bb7;
+
+ const struct dib0090_tuning *current_tune_table_index;
+ const struct dib0090_pll *current_pll_table_index;
+
+ u8 tuner_is_tuned;
+ u8 agc_freeze;
+
+ struct dib0090_identity identity;
+
+ u32 rf_request;
+ u8 current_standard;
+
+ u8 calibrate;
+ u32 rest;
+ u16 bias;
+ s16 temperature;
+
+ u8 wbd_calibration_gain;
+ const struct dib0090_wbd_slope *current_wbd_table;
+ u16 wbdmux;
+
+ /* for the I2C transfer */
+ struct i2c_msg msg[2];
+ u8 i2c_write_buffer[3];
+ u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
+};
+
+struct dib0090_fw_state {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend *fe;
+ struct dib0090_identity identity;
+ const struct dib0090_config *config;
+
+ /* for the I2C transfer */
+ struct i2c_msg msg;
+ u8 i2c_write_buffer[2];
+ u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
+};
+
+static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg)
+{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
+ state->i2c_write_buffer[0] = reg;
+
+ memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
+ state->msg[0].addr = state->config->i2c_address;
+ state->msg[0].flags = 0;
+ state->msg[0].buf = state->i2c_write_buffer;
+ state->msg[0].len = 1;
+ state->msg[1].addr = state->config->i2c_address;
+ state->msg[1].flags = I2C_M_RD;
+ state->msg[1].buf = state->i2c_read_buffer;
+ state->msg[1].len = 2;
+
+ if (i2c_transfer(state->i2c, state->msg, 2) != 2) {
+ printk(KERN_WARNING "DiB0090 I2C read failed\n");
+ ret = 0;
+ } else
+ ret = (state->i2c_read_buffer[0] << 8)
+ | state->i2c_read_buffer[1];
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
+}
+
+static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
+ state->i2c_write_buffer[0] = reg & 0xff;
+ state->i2c_write_buffer[1] = val >> 8;
+ state->i2c_write_buffer[2] = val & 0xff;
+
+ memset(state->msg, 0, sizeof(struct i2c_msg));
+ state->msg[0].addr = state->config->i2c_address;
+ state->msg[0].flags = 0;
+ state->msg[0].buf = state->i2c_write_buffer;
+ state->msg[0].len = 3;
+
+ if (i2c_transfer(state->i2c, state->msg, 1) != 1) {
+ printk(KERN_WARNING "DiB0090 I2C write failed\n");
+ ret = -EREMOTEIO;
+ } else
+ ret = 0;
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
+}
+
+static u16 dib0090_fw_read_reg(struct dib0090_fw_state *state, u8 reg)
+{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
+ state->i2c_write_buffer[0] = reg;
+
+ memset(&state->msg, 0, sizeof(struct i2c_msg));
+ state->msg.addr = reg;
+ state->msg.flags = I2C_M_RD;
+ state->msg.buf = state->i2c_read_buffer;
+ state->msg.len = 2;
+ if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
+ printk(KERN_WARNING "DiB0090 I2C read failed\n");
+ ret = 0;
+ } else
+ ret = (state->i2c_read_buffer[0] << 8)
+ | state->i2c_read_buffer[1];
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
+}
+
+static int dib0090_fw_write_reg(struct dib0090_fw_state *state, u8 reg, u16 val)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
+ state->i2c_write_buffer[0] = val >> 8;
+ state->i2c_write_buffer[1] = val & 0xff;
+
+ memset(&state->msg, 0, sizeof(struct i2c_msg));
+ state->msg.addr = reg;
+ state->msg.flags = 0;
+ state->msg.buf = state->i2c_write_buffer;
+ state->msg.len = 2;
+ if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
+ printk(KERN_WARNING "DiB0090 I2C write failed\n");
+ ret = -EREMOTEIO;
+ } else
+ ret = 0;
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
+}
+
+#define HARD_RESET(state) do { if (cfg->reset) { if (cfg->sleep) cfg->sleep(fe, 0); msleep(10); cfg->reset(fe, 1); msleep(10); cfg->reset(fe, 0); msleep(10); } } while (0)
+#define ADC_TARGET -220
+#define GAIN_ALPHA 5
+#define WBD_ALPHA 6
+#define LPF 100
+static void dib0090_write_regs(struct dib0090_state *state, u8 r, const u16 * b, u8 c)
+{
+ do {
+ dib0090_write_reg(state, r++, *b++);
+ } while (--c);
+}
+
+static int dib0090_identify(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ u16 v;
+ struct dib0090_identity *identity = &state->identity;
+
+ v = dib0090_read_reg(state, 0x1a);
+
+ identity->p1g = 0;
+ identity->in_soc = 0;
+
+ dprintk("Tuner identification (Version = 0x%04x)", v);
+
+ /* without PLL lock info */
+ v &= ~KROSUS_PLL_LOCKED;
+
+ identity->version = v & 0xff;
+ identity->product = (v >> 8) & 0xf;
+
+ if (identity->product != KROSUS)
+ goto identification_error;
+
+ if ((identity->version & 0x3) == SOC) {
+ identity->in_soc = 1;
+ switch (identity->version) {
+ case SOC_8090_P1G_11R1:
+ dprintk("SOC 8090 P1-G11R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ case SOC_8090_P1G_21R1:
+ dprintk("SOC 8090 P1-G21R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ case SOC_7090_P1G_11R1:
+ dprintk("SOC 7090 P1-G11R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ case SOC_7090_P1G_21R1:
+ dprintk("SOC 7090 P1-G21R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ default:
+ goto identification_error;
+ }
+ } else {
+ switch ((identity->version >> 5) & 0x7) {
+ case MP001:
+ dprintk("MP001 : 9090/8096");
+ break;
+ case MP005:
+ dprintk("MP005 : Single Sband");
+ break;
+ case MP008:
+ dprintk("MP008 : diversity VHF-UHF-LBAND");
+ break;
+ case MP009:
+ dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND");
+ break;
+ default:
+ goto identification_error;
+ }
+
+ switch (identity->version & 0x1f) {
+ case P1G_21R2:
+ dprintk("P1G_21R2 detected");
+ identity->p1g = 1;
+ break;
+ case P1G:
+ dprintk("P1G detected");
+ identity->p1g = 1;
+ break;
+ case P1D_E_F:
+ dprintk("P1D/E/F detected");
+ break;
+ case P1C:
+ dprintk("P1C detected");
+ break;
+ case P1A_B:
+ dprintk("P1-A/B detected: driver is deactivated - not available");
+ goto identification_error;
+ break;
+ default:
+ goto identification_error;
+ }
+ }
+
+ return 0;
+
+identification_error:
+ return -EIO;
+}
+
+static int dib0090_fw_identify(struct dvb_frontend *fe)
+{
+ struct dib0090_fw_state *state = fe->tuner_priv;
+ struct dib0090_identity *identity = &state->identity;
+
+ u16 v = dib0090_fw_read_reg(state, 0x1a);
+ identity->p1g = 0;
+ identity->in_soc = 0;
+
+ dprintk("FE: Tuner identification (Version = 0x%04x)", v);
+
+ /* without PLL lock info */
+ v &= ~KROSUS_PLL_LOCKED;
+
+ identity->version = v & 0xff;
+ identity->product = (v >> 8) & 0xf;
+
+ if (identity->product != KROSUS)
+ goto identification_error;
+
+ if ((identity->version & 0x3) == SOC) {
+ identity->in_soc = 1;
+ switch (identity->version) {
+ case SOC_8090_P1G_11R1:
+ dprintk("SOC 8090 P1-G11R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ case SOC_8090_P1G_21R1:
+ dprintk("SOC 8090 P1-G21R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ case SOC_7090_P1G_11R1:
+ dprintk("SOC 7090 P1-G11R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ case SOC_7090_P1G_21R1:
+ dprintk("SOC 7090 P1-G21R1 Has been detected");
+ identity->p1g = 1;
+ break;
+ default:
+ goto identification_error;
+ }
+ } else {
+ switch ((identity->version >> 5) & 0x7) {
+ case MP001:
+ dprintk("MP001 : 9090/8096");
+ break;
+ case MP005:
+ dprintk("MP005 : Single Sband");
+ break;
+ case MP008:
+ dprintk("MP008 : diversity VHF-UHF-LBAND");
+ break;
+ case MP009:
+ dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND");
+ break;
+ default:
+ goto identification_error;
+ }
+
+ switch (identity->version & 0x1f) {
+ case P1G_21R2:
+ dprintk("P1G_21R2 detected");
+ identity->p1g = 1;
+ break;
+ case P1G:
+ dprintk("P1G detected");
+ identity->p1g = 1;
+ break;
+ case P1D_E_F:
+ dprintk("P1D/E/F detected");
+ break;
+ case P1C:
+ dprintk("P1C detected");
+ break;
+ case P1A_B:
+ dprintk("P1-A/B detected: driver is deactivated - not available");
+ goto identification_error;
+ break;
+ default:
+ goto identification_error;
+ }
+ }
+
+ return 0;
+
+identification_error:
+ return -EIO;
+}
+
+static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ u16 PllCfg, i, v;
+
+ HARD_RESET(state);
+ dib0090_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL);
+ if (cfg->in_soc)
+ return;
+
+ dib0090_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL); /* PLL, DIG_CLK and CRYSTAL remain */
+ /* adcClkOutRatio=8->7, release reset */
+ dib0090_write_reg(state, 0x20, ((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (0 << 4) | 0);
+ if (cfg->clkoutdrive != 0)
+ dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8)
+ | (cfg->clkoutdrive << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0));
+ else
+ dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8)
+ | (7 << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0));
+
+ /* Read Pll current config * */
+ PllCfg = dib0090_read_reg(state, 0x21);
+
+ /** Reconfigure PLL if current setting is different from default setting **/
+ if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && (!cfg->in_soc)
+ && !cfg->io.pll_bypass) {
+
+ /* Set Bypass mode */
+ PllCfg |= (1 << 15);
+ dib0090_write_reg(state, 0x21, PllCfg);
+
+ /* Set Reset Pll */
+ PllCfg &= ~(1 << 13);
+ dib0090_write_reg(state, 0x21, PllCfg);
+
+ /*** Set new Pll configuration in bypass and reset state ***/
+ PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv);
+ dib0090_write_reg(state, 0x21, PllCfg);
+
+ /* Remove Reset Pll */
+ PllCfg |= (1 << 13);
+ dib0090_write_reg(state, 0x21, PllCfg);
+
+ /*** Wait for PLL lock ***/
+ i = 100;
+ do {
+ v = !!(dib0090_read_reg(state, 0x1a) & 0x800);
+ if (v)
+ break;
+ } while (--i);
+
+ if (i == 0) {
+ dprintk("Pll: Unable to lock Pll");
+ return;
+ }
+
+ /* Finally Remove Bypass mode */
+ PllCfg &= ~(1 << 15);
+ dib0090_write_reg(state, 0x21, PllCfg);
+ }
+
+ if (cfg->io.pll_bypass) {
+ PllCfg |= (cfg->io.pll_bypass << 15);
+ dib0090_write_reg(state, 0x21, PllCfg);
+ }
+}
+
+static int dib0090_fw_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg)
+{
+ struct dib0090_fw_state *state = fe->tuner_priv;
+ u16 PllCfg;
+ u16 v;
+ int i;
+
+ dprintk("fw reset digital");
+ HARD_RESET(state);
+
+ dib0090_fw_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL);
+ dib0090_fw_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL); /* PLL, DIG_CLK and CRYSTAL remain */
+
+ dib0090_fw_write_reg(state, 0x20,
+ ((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (cfg->data_tx_drv << 4) | cfg->ls_cfg_pad_drv);
+
+ v = (0 << 15) | ((!cfg->analog_output) << 14) | (1 << 9) | (0 << 8) | (cfg->clkouttobamse << 4) | (0 << 2) | (0);
+ if (cfg->clkoutdrive != 0)
+ v |= cfg->clkoutdrive << 5;
+ else
+ v |= 7 << 5;
+
+ v |= 2 << 10;
+ dib0090_fw_write_reg(state, 0x23, v);
+
+ /* Read Pll current config * */
+ PllCfg = dib0090_fw_read_reg(state, 0x21);
+
+ /** Reconfigure PLL if current setting is different from default setting **/
+ if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && !cfg->io.pll_bypass) {
+
+ /* Set Bypass mode */
+ PllCfg |= (1 << 15);
+ dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+ /* Set Reset Pll */
+ PllCfg &= ~(1 << 13);
+ dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+ /*** Set new Pll configuration in bypass and reset state ***/
+ PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv);
+ dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+ /* Remove Reset Pll */
+ PllCfg |= (1 << 13);
+ dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+ /*** Wait for PLL lock ***/
+ i = 100;
+ do {
+ v = !!(dib0090_fw_read_reg(state, 0x1a) & 0x800);
+ if (v)
+ break;
+ } while (--i);
+
+ if (i == 0) {
+ dprintk("Pll: Unable to lock Pll");
+ return -EIO;
+ }
+
+ /* Finally Remove Bypass mode */
+ PllCfg &= ~(1 << 15);
+ dib0090_fw_write_reg(state, 0x21, PllCfg);
+ }
+
+ if (cfg->io.pll_bypass) {
+ PllCfg |= (cfg->io.pll_bypass << 15);
+ dib0090_fw_write_reg(state, 0x21, PllCfg);
+ }
+
+ return dib0090_fw_identify(fe);
+}
+
+static int dib0090_wakeup(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ if (state->config->sleep)
+ state->config->sleep(fe, 0);
+
+ /* enable dataTX in case we have been restarted in the wrong moment */
+ dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
+ return 0;
+}
+
+static int dib0090_sleep(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ if (state->config->sleep)
+ state->config->sleep(fe, 1);
+ return 0;
+}
+
+void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ if (fast)
+ dib0090_write_reg(state, 0x04, 0);
+ else
+ dib0090_write_reg(state, 0x04, 1);
+}
+
+EXPORT_SYMBOL(dib0090_dcc_freq);
+
+static const u16 bb_ramp_pwm_normal_socs[] = {
+ 550, /* max BB gain in 10th of dB */
+ (1<<9) | 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */
+ 440,
+ (4 << 9) | 0, /* BB_RAMP3 = 26dB */
+ (0 << 9) | 208, /* BB_RAMP4 */
+ (4 << 9) | 208, /* BB_RAMP5 = 29dB */
+ (0 << 9) | 440, /* BB_RAMP6 */
+};
+
+static const u16 rf_ramp_pwm_cband_7090p[] = {
+ 280, /* max RF gain in 10th of dB */
+ 18, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 504, /* ramp_max = maximum X used on the ramp */
+ (29 << 10) | 364, /* RF_RAMP5, LNA 1 = 8dB */
+ (0 << 10) | 504, /* RF_RAMP6, LNA 1 */
+ (60 << 10) | 228, /* RF_RAMP7, LNA 2 = 7.7dB */
+ (0 << 10) | 364, /* RF_RAMP8, LNA 2 */
+ (34 << 10) | 109, /* GAIN_4_1, LNA 3 = 6.8dB */
+ (0 << 10) | 228, /* GAIN_4_2, LNA 3 */
+ (37 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */
+ (0 << 10) | 109, /* RF_RAMP4, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_cband_7090e_sensitivity[] = {
+ 186, /* max RF gain in 10th of dB */
+ 40, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 746, /* ramp_max = maximum X used on the ramp */
+ (10 << 10) | 345, /* RF_RAMP5, LNA 1 = 10dB */
+ (0 << 10) | 746, /* RF_RAMP6, LNA 1 */
+ (0 << 10) | 0, /* RF_RAMP7, LNA 2 = 0 dB */
+ (0 << 10) | 0, /* RF_RAMP8, LNA 2 */
+ (28 << 10) | 200, /* GAIN_4_1, LNA 3 = 6.8dB */ /* 3.61 dB */
+ (0 << 10) | 345, /* GAIN_4_2, LNA 3 */
+ (20 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */ /* 4.96 dB */
+ (0 << 10) | 200, /* RF_RAMP4, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_cband_7090e_aci[] = {
+ 86, /* max RF gain in 10th of dB */
+ 40, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 345, /* ramp_max = maximum X used on the ramp */
+ (0 << 10) | 0, /* RF_RAMP5, LNA 1 = 8dB */ /* 7.47 dB */
+ (0 << 10) | 0, /* RF_RAMP6, LNA 1 */
+ (0 << 10) | 0, /* RF_RAMP7, LNA 2 = 0 dB */
+ (0 << 10) | 0, /* RF_RAMP8, LNA 2 */
+ (28 << 10) | 200, /* GAIN_4_1, LNA 3 = 6.8dB */ /* 3.61 dB */
+ (0 << 10) | 345, /* GAIN_4_2, LNA 3 */
+ (20 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */ /* 4.96 dB */
+ (0 << 10) | 200, /* RF_RAMP4, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_cband_8090[] = {
+ 345, /* max RF gain in 10th of dB */
+ 29, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 1000, /* ramp_max = maximum X used on the ramp */
+ (35 << 10) | 772, /* RF_RAMP3, LNA 1 = 8dB */
+ (0 << 10) | 1000, /* RF_RAMP4, LNA 1 */
+ (58 << 10) | 496, /* RF_RAMP5, LNA 2 = 9.5dB */
+ (0 << 10) | 772, /* RF_RAMP6, LNA 2 */
+ (27 << 10) | 200, /* RF_RAMP7, LNA 3 = 10.5dB */
+ (0 << 10) | 496, /* RF_RAMP8, LNA 3 */
+ (40 << 10) | 0, /* GAIN_4_1, LNA 4 = 7dB */
+ (0 << 10) | 200, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_uhf_7090[] = {
+ 407, /* max RF gain in 10th of dB */
+ 13, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 529, /* ramp_max = maximum X used on the ramp */
+ (23 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.7dB */
+ (0 << 10) | 176, /* RF_RAMP4, LNA 1 */
+ (63 << 10) | 400, /* RF_RAMP5, LNA 2 = 8dB */
+ (0 << 10) | 529, /* RF_RAMP6, LNA 2 */
+ (48 << 10) | 316, /* RF_RAMP7, LNA 3 = 6.8dB */
+ (0 << 10) | 400, /* RF_RAMP8, LNA 3 */
+ (29 << 10) | 176, /* GAIN_4_1, LNA 4 = 11.5dB */
+ (0 << 10) | 316, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_uhf_8090[] = {
+ 388, /* max RF gain in 10th of dB */
+ 26, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 1008, /* ramp_max = maximum X used on the ramp */
+ (11 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.7dB */
+ (0 << 10) | 369, /* RF_RAMP4, LNA 1 */
+ (41 << 10) | 809, /* RF_RAMP5, LNA 2 = 8dB */
+ (0 << 10) | 1008, /* RF_RAMP6, LNA 2 */
+ (27 << 10) | 659, /* RF_RAMP7, LNA 3 = 6dB */
+ (0 << 10) | 809, /* RF_RAMP8, LNA 3 */
+ (14 << 10) | 369, /* GAIN_4_1, LNA 4 = 11.5dB */
+ (0 << 10) | 659, /* GAIN_4_2, LNA 4 */
+};
+
+/* GENERAL PWM ramp definition for all other Krosus */
+static const u16 bb_ramp_pwm_normal[] = {
+ 500, /* max BB gain in 10th of dB */
+ 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */
+ 400,
+ (2 << 9) | 0, /* BB_RAMP3 = 21dB */
+ (0 << 9) | 168, /* BB_RAMP4 */
+ (2 << 9) | 168, /* BB_RAMP5 = 29dB */
+ (0 << 9) | 400, /* BB_RAMP6 */
+};
+
+static const u16 bb_ramp_pwm_boost[] = {
+ 550, /* max BB gain in 10th of dB */
+ 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */
+ 440,
+ (2 << 9) | 0, /* BB_RAMP3 = 26dB */
+ (0 << 9) | 208, /* BB_RAMP4 */
+ (2 << 9) | 208, /* BB_RAMP5 = 29dB */
+ (0 << 9) | 440, /* BB_RAMP6 */
+};
+
+static const u16 rf_ramp_pwm_cband[] = {
+ 314, /* max RF gain in 10th of dB */
+ 33, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 1023, /* ramp_max = maximum X used on the ramp */
+ (8 << 10) | 743, /* RF_RAMP3, LNA 1 = 0dB */
+ (0 << 10) | 1023, /* RF_RAMP4, LNA 1 */
+ (15 << 10) | 469, /* RF_RAMP5, LNA 2 = 0dB */
+ (0 << 10) | 742, /* RF_RAMP6, LNA 2 */
+ (9 << 10) | 234, /* RF_RAMP7, LNA 3 = 0dB */
+ (0 << 10) | 468, /* RF_RAMP8, LNA 3 */
+ (9 << 10) | 0, /* GAIN_4_1, LNA 4 = 0dB */
+ (0 << 10) | 233, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_vhf[] = {
+ 398, /* max RF gain in 10th of dB */
+ 24, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 954, /* ramp_max = maximum X used on the ramp */
+ (7 << 10) | 0, /* RF_RAMP3, LNA 1 = 13.2dB */
+ (0 << 10) | 290, /* RF_RAMP4, LNA 1 */
+ (16 << 10) | 699, /* RF_RAMP5, LNA 2 = 10.5dB */
+ (0 << 10) | 954, /* RF_RAMP6, LNA 2 */
+ (17 << 10) | 580, /* RF_RAMP7, LNA 3 = 5dB */
+ (0 << 10) | 699, /* RF_RAMP8, LNA 3 */
+ (7 << 10) | 290, /* GAIN_4_1, LNA 4 = 12.5dB */
+ (0 << 10) | 580, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_uhf[] = {
+ 398, /* max RF gain in 10th of dB */
+ 24, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 954, /* ramp_max = maximum X used on the ramp */
+ (7 << 10) | 0, /* RF_RAMP3, LNA 1 = 13.2dB */
+ (0 << 10) | 290, /* RF_RAMP4, LNA 1 */
+ (16 << 10) | 699, /* RF_RAMP5, LNA 2 = 10.5dB */
+ (0 << 10) | 954, /* RF_RAMP6, LNA 2 */
+ (17 << 10) | 580, /* RF_RAMP7, LNA 3 = 5dB */
+ (0 << 10) | 699, /* RF_RAMP8, LNA 3 */
+ (7 << 10) | 290, /* GAIN_4_1, LNA 4 = 12.5dB */
+ (0 << 10) | 580, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_sband[] = {
+ 253, /* max RF gain in 10th of dB */
+ 38, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+ 961,
+ (4 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.1dB */
+ (0 << 10) | 508, /* RF_RAMP4, LNA 1 */
+ (9 << 10) | 508, /* RF_RAMP5, LNA 2 = 11.2dB */
+ (0 << 10) | 961, /* RF_RAMP6, LNA 2 */
+ (0 << 10) | 0, /* RF_RAMP7, LNA 3 = 0dB */
+ (0 << 10) | 0, /* RF_RAMP8, LNA 3 */
+ (0 << 10) | 0, /* GAIN_4_1, LNA 4 = 0dB */
+ (0 << 10) | 0, /* GAIN_4_2, LNA 4 */
+};
+
+struct slope {
+ s16 range;
+ s16 slope;
+};
+static u16 slopes_to_scale(const struct slope *slopes, u8 num, s16 val)
+{
+ u8 i;
+ u16 rest;
+ u16 ret = 0;
+ for (i = 0; i < num; i++) {
+ if (val > slopes[i].range)
+ rest = slopes[i].range;
+ else
+ rest = val;
+ ret += (rest * slopes[i].slope) / slopes[i].range;
+ val -= rest;
+ }
+ return ret;
+}
+
+static const struct slope dib0090_wbd_slopes[3] = {
+ {66, 120}, /* -64,-52: offset - 65 */
+ {600, 170}, /* -52,-35: 65 - 665 */
+ {170, 250}, /* -45,-10: 665 - 835 */
+};
+
+static s16 dib0090_wbd_to_db(struct dib0090_state *state, u16 wbd)
+{
+ wbd &= 0x3ff;
+ if (wbd < state->wbd_offset)
+ wbd = 0;
+ else
+ wbd -= state->wbd_offset;
+ /* -64dB is the floor */
+ return -640 + (s16) slopes_to_scale(dib0090_wbd_slopes, ARRAY_SIZE(dib0090_wbd_slopes), wbd);
+}
+
+static void dib0090_wbd_target(struct dib0090_state *state, u32 rf)
+{
+ u16 offset = 250;
+
+ /* TODO : DAB digital N+/-1 interferer perfs : offset = 10 */
+
+ if (state->current_band == BAND_VHF)
+ offset = 650;
+#ifndef FIRMWARE_FIREFLY
+ if (state->current_band == BAND_VHF)
+ offset = state->config->wbd_vhf_offset;
+ if (state->current_band == BAND_CBAND)
+ offset = state->config->wbd_cband_offset;
+#endif
+
+ state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + offset);
+ dprintk("wbd-target: %d dB", (u32) state->wbd_target);
+}
+
+static const int gain_reg_addr[4] = {
+ 0x08, 0x0a, 0x0f, 0x01
+};
+
+static void dib0090_gain_apply(struct dib0090_state *state, s16 gain_delta, s16 top_delta, u8 force)
+{
+ u16 rf, bb, ref;
+ u16 i, v, gain_reg[4] = { 0 }, gain;
+ const u16 *g;
+
+ if (top_delta < -511)
+ top_delta = -511;
+ if (top_delta > 511)
+ top_delta = 511;
+
+ if (force) {
+ top_delta *= (1 << WBD_ALPHA);
+ gain_delta *= (1 << GAIN_ALPHA);
+ }
+
+ if (top_delta >= ((s16) (state->rf_ramp[0] << WBD_ALPHA) - state->rf_gain_limit)) /* overflow */
+ state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA;
+ else
+ state->rf_gain_limit += top_delta;
+
+ if (state->rf_gain_limit < 0) /*underflow */
+ state->rf_gain_limit = 0;
+
+ /* use gain as a temporary variable and correct current_gain */
+ gain = ((state->rf_gain_limit >> WBD_ALPHA) + state->bb_ramp[0]) << GAIN_ALPHA;
+ if (gain_delta >= ((s16) gain - state->current_gain)) /* overflow */
+ state->current_gain = gain;
+ else
+ state->current_gain += gain_delta;
+ /* cannot be less than 0 (only if gain_delta is less than 0 we can have current_gain < 0) */
+ if (state->current_gain < 0)
+ state->current_gain = 0;
+
+ /* now split total gain to rf and bb gain */
+ gain = state->current_gain >> GAIN_ALPHA;
+
+ /* requested gain is bigger than rf gain limit - ACI/WBD adjustment */
+ if (gain > (state->rf_gain_limit >> WBD_ALPHA)) {
+ rf = state->rf_gain_limit >> WBD_ALPHA;
+ bb = gain - rf;
+ if (bb > state->bb_ramp[0])
+ bb = state->bb_ramp[0];
+ } else { /* high signal level -> all gains put on RF */
+ rf = gain;
+ bb = 0;
+ }
+
+ state->gain[0] = rf;
+ state->gain[1] = bb;
+
+ /* software ramp */
+ /* Start with RF gains */
+ g = state->rf_ramp + 1; /* point on RF LNA1 max gain */
+ ref = rf;
+ for (i = 0; i < 7; i++) { /* Go over all amplifiers => 5RF amps + 2 BB amps = 7 amps */
+ if (g[0] == 0 || ref < (g[1] - g[0])) /* if total gain of the current amp is null or this amp is not concerned because it starts to work from an higher gain value */
+ v = 0; /* force the gain to write for the current amp to be null */
+ else if (ref >= g[1]) /* Gain to set is higher than the high working point of this amp */
+ v = g[2]; /* force this amp to be full gain */
+ else /* compute the value to set to this amp because we are somewhere in his range */
+ v = ((ref - (g[1] - g[0])) * g[2]) / g[0];
+
+ if (i == 0) /* LNA 1 reg mapping */
+ gain_reg[0] = v;
+ else if (i == 1) /* LNA 2 reg mapping */
+ gain_reg[0] |= v << 7;
+ else if (i == 2) /* LNA 3 reg mapping */
+ gain_reg[1] = v;
+ else if (i == 3) /* LNA 4 reg mapping */
+ gain_reg[1] |= v << 7;
+ else if (i == 4) /* CBAND LNA reg mapping */
+ gain_reg[2] = v | state->rf_lt_def;
+ else if (i == 5) /* BB gain 1 reg mapping */
+ gain_reg[3] = v << 3;
+ else if (i == 6) /* BB gain 2 reg mapping */
+ gain_reg[3] |= v << 8;
+
+ g += 3; /* go to next gain bloc */
+
+ /* When RF is finished, start with BB */
+ if (i == 4) {
+ g = state->bb_ramp + 1; /* point on BB gain 1 max gain */
+ ref = bb;
+ }
+ }
+ gain_reg[3] |= state->bb_1_def;
+ gain_reg[3] |= ((bb % 10) * 100) / 125;
+
+#ifdef DEBUG_AGC
+ dprintk("GA CALC: DB: %3d(rf) + %3d(bb) = %3d gain_reg[0]=%04x gain_reg[1]=%04x gain_reg[2]=%04x gain_reg[0]=%04x", rf, bb, rf + bb,
+ gain_reg[0], gain_reg[1], gain_reg[2], gain_reg[3]);
+#endif
+
+ /* Write the amplifier regs */
+ for (i = 0; i < 4; i++) {
+ v = gain_reg[i];
+ if (force || state->gain_reg[i] != v) {
+ state->gain_reg[i] = v;
+ dib0090_write_reg(state, gain_reg_addr[i], v);
+ }
+ }
+}
+
+static void dib0090_set_boost(struct dib0090_state *state, int onoff)
+{
+ state->bb_1_def &= 0xdfff;
+ state->bb_1_def |= onoff << 13;
+}
+
+static void dib0090_set_rframp(struct dib0090_state *state, const u16 * cfg)
+{
+ state->rf_ramp = cfg;
+}
+
+static void dib0090_set_rframp_pwm(struct dib0090_state *state, const u16 * cfg)
+{
+ state->rf_ramp = cfg;
+
+ dib0090_write_reg(state, 0x2a, 0xffff);
+
+ dprintk("total RF gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x2a));
+
+ dib0090_write_regs(state, 0x2c, cfg + 3, 6);
+ dib0090_write_regs(state, 0x3e, cfg + 9, 2);
+}
+
+static void dib0090_set_bbramp(struct dib0090_state *state, const u16 * cfg)
+{
+ state->bb_ramp = cfg;
+ dib0090_set_boost(state, cfg[0] > 500); /* we want the boost if the gain is higher that 50dB */
+}
+
+static void dib0090_set_bbramp_pwm(struct dib0090_state *state, const u16 * cfg)
+{
+ state->bb_ramp = cfg;
+
+ dib0090_set_boost(state, cfg[0] > 500); /* we want the boost if the gain is higher that 50dB */
+
+ dib0090_write_reg(state, 0x33, 0xffff);
+ dprintk("total BB gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x33));
+ dib0090_write_regs(state, 0x35, cfg + 3, 4);
+}
+
+void dib0090_pwm_gain_reset(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ u16 *bb_ramp = (u16 *)&bb_ramp_pwm_normal; /* default baseband config */
+ u16 *rf_ramp = NULL;
+ u8 en_pwm_rf_mux = 1;
+
+ /* reset the AGC */
+ if (state->config->use_pwm_agc) {
+ if (state->current_band == BAND_CBAND) {
+ if (state->identity.in_soc) {
+ bb_ramp = (u16 *)&bb_ramp_pwm_normal_socs;
+ if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
+ rf_ramp = (u16 *)&rf_ramp_pwm_cband_8090;
+ else if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1) {
+ if (state->config->is_dib7090e) {
+ if (state->rf_ramp == NULL)
+ rf_ramp = (u16 *)&rf_ramp_pwm_cband_7090e_sensitivity;
+ else
+ rf_ramp = (u16 *)state->rf_ramp;
+ } else
+ rf_ramp = (u16 *)&rf_ramp_pwm_cband_7090p;
+ }
+ } else
+ rf_ramp = (u16 *)&rf_ramp_pwm_cband;
+ } else
+
+ if (state->current_band == BAND_VHF) {
+ if (state->identity.in_soc) {
+ bb_ramp = (u16 *)&bb_ramp_pwm_normal_socs;
+ /* rf_ramp = &rf_ramp_pwm_vhf_socs; */ /* TODO */
+ } else
+ rf_ramp = (u16 *)&rf_ramp_pwm_vhf;
+ } else if (state->current_band == BAND_UHF) {
+ if (state->identity.in_soc) {
+ bb_ramp = (u16 *)&bb_ramp_pwm_normal_socs;
+ if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
+ rf_ramp = (u16 *)&rf_ramp_pwm_uhf_8090;
+ else if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1)
+ rf_ramp = (u16 *)&rf_ramp_pwm_uhf_7090;
+ } else
+ rf_ramp = (u16 *)&rf_ramp_pwm_uhf;
+ }
+ if (rf_ramp)
+ dib0090_set_rframp_pwm(state, rf_ramp);
+ dib0090_set_bbramp_pwm(state, bb_ramp);
+
+ /* activate the ramp generator using PWM control */
+ dprintk("ramp RF gain = %d BAND = %s version = %d", state->rf_ramp[0], (state->current_band == BAND_CBAND) ? "CBAND" : "NOT CBAND", state->identity.version & 0x1f);
+
+ if ((state->rf_ramp[0] == 0) || (state->current_band == BAND_CBAND && (state->identity.version & 0x1f) <= P1D_E_F)) {
+ dprintk("DE-Engage mux for direct gain reg control");
+ en_pwm_rf_mux = 0;
+ } else
+ dprintk("Engage mux for PWM control");
+
+ dib0090_write_reg(state, 0x32, (en_pwm_rf_mux << 12) | (en_pwm_rf_mux << 11));
+
+ /* Set fast servo cutoff to start AGC; 0 = 1KHz ; 1 = 50Hz ; 2 = 150Hz ; 3 = 50KHz ; 4 = servo fast*/
+ if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1)
+ dib0090_write_reg(state, 0x04, 3);
+ else
+ dib0090_write_reg(state, 0x04, 1);
+ dib0090_write_reg(state, 0x39, (1 << 10)); /* 0 gain by default */
+ }
+}
+EXPORT_SYMBOL(dib0090_pwm_gain_reset);
+
+void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ if (DC_servo_cutoff < 4)
+ dib0090_write_reg(state, 0x04, DC_servo_cutoff);
+}
+EXPORT_SYMBOL(dib0090_set_dc_servo);
+
+static u32 dib0090_get_slow_adc_val(struct dib0090_state *state)
+{
+ u16 adc_val = dib0090_read_reg(state, 0x1d);
+ if (state->identity.in_soc)
+ adc_val >>= 2;
+ return adc_val;
+}
+
+int dib0090_gain_control(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ enum frontend_tune_state *tune_state = &state->tune_state;
+ int ret = 10;
+
+ u16 wbd_val = 0;
+ u8 apply_gain_immediatly = 1;
+ s16 wbd_error = 0, adc_error = 0;
+
+ if (*tune_state == CT_AGC_START) {
+ state->agc_freeze = 0;
+ dib0090_write_reg(state, 0x04, 0x0);
+
+#ifdef CONFIG_BAND_SBAND
+ if (state->current_band == BAND_SBAND) {
+ dib0090_set_rframp(state, rf_ramp_sband);
+ dib0090_set_bbramp(state, bb_ramp_boost);
+ } else
+#endif
+#ifdef CONFIG_BAND_VHF
+ if (state->current_band == BAND_VHF && !state->identity.p1g) {
+ dib0090_set_rframp(state, rf_ramp_pwm_vhf);
+ dib0090_set_bbramp(state, bb_ramp_pwm_normal);
+ } else
+#endif
+#ifdef CONFIG_BAND_CBAND
+ if (state->current_band == BAND_CBAND && !state->identity.p1g) {
+ dib0090_set_rframp(state, rf_ramp_pwm_cband);
+ dib0090_set_bbramp(state, bb_ramp_pwm_normal);
+ } else
+#endif
+ if ((state->current_band == BAND_CBAND || state->current_band == BAND_VHF) && state->identity.p1g) {
+ dib0090_set_rframp(state, rf_ramp_pwm_cband_7090p);
+ dib0090_set_bbramp(state, bb_ramp_pwm_normal_socs);
+ } else {
+ dib0090_set_rframp(state, rf_ramp_pwm_uhf);
+ dib0090_set_bbramp(state, bb_ramp_pwm_normal);
+ }
+
+ dib0090_write_reg(state, 0x32, 0);
+ dib0090_write_reg(state, 0x39, 0);
+
+ dib0090_wbd_target(state, state->current_rf);
+
+ state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA;
+ state->current_gain = ((state->rf_ramp[0] + state->bb_ramp[0]) / 2) << GAIN_ALPHA;
+
+ *tune_state = CT_AGC_STEP_0;
+ } else if (!state->agc_freeze) {
+ s16 wbd = 0, i, cnt;
+
+ int adc;
+ wbd_val = dib0090_get_slow_adc_val(state);
+
+ if (*tune_state == CT_AGC_STEP_0)
+ cnt = 5;
+ else
+ cnt = 1;
+
+ for (i = 0; i < cnt; i++) {
+ wbd_val = dib0090_get_slow_adc_val(state);
+ wbd += dib0090_wbd_to_db(state, wbd_val);
+ }
+ wbd /= cnt;
+ wbd_error = state->wbd_target - wbd;
+
+ if (*tune_state == CT_AGC_STEP_0) {
+ if (wbd_error < 0 && state->rf_gain_limit > 0 && !state->identity.p1g) {
+#ifdef CONFIG_BAND_CBAND
+ /* in case of CBAND tune reduce first the lt_gain2 before adjusting the RF gain */
+ u8 ltg2 = (state->rf_lt_def >> 10) & 0x7;
+ if (state->current_band == BAND_CBAND && ltg2) {
+ ltg2 >>= 1;
+ state->rf_lt_def &= ltg2 << 10; /* reduce in 3 steps from 7 to 0 */
+ }
+#endif
+ } else {
+ state->agc_step = 0;
+ *tune_state = CT_AGC_STEP_1;
+ }
+ } else {
+ /* calc the adc power */
+ adc = state->config->get_adc_power(fe);
+ adc = (adc * ((s32) 355774) + (((s32) 1) << 20)) >> 21; /* included in [0:-700] */
+
+ adc_error = (s16) (((s32) ADC_TARGET) - adc);
+#ifdef CONFIG_STANDARD_DAB
+ if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB)
+ adc_error -= 10;
+#endif
+#ifdef CONFIG_STANDARD_DVBT
+ if (state->fe->dtv_property_cache.delivery_system == STANDARD_DVBT &&
+ (state->fe->dtv_property_cache.modulation == QAM_64 || state->fe->dtv_property_cache.modulation == QAM_16))
+ adc_error += 60;
+#endif
+#ifdef CONFIG_SYS_ISDBT
+ if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) && (((state->fe->dtv_property_cache.layer[0].segment_count >
+ 0)
+ &&
+ ((state->fe->dtv_property_cache.layer[0].modulation ==
+ QAM_64)
+ || (state->fe->dtv_property_cache.
+ layer[0].modulation == QAM_16)))
+ ||
+ ((state->fe->dtv_property_cache.layer[1].segment_count >
+ 0)
+ &&
+ ((state->fe->dtv_property_cache.layer[1].modulation ==
+ QAM_64)
+ || (state->fe->dtv_property_cache.
+ layer[1].modulation == QAM_16)))
+ ||
+ ((state->fe->dtv_property_cache.layer[2].segment_count >
+ 0)
+ &&
+ ((state->fe->dtv_property_cache.layer[2].modulation ==
+ QAM_64)
+ || (state->fe->dtv_property_cache.
+ layer[2].modulation == QAM_16)))
+ )
+ )
+ adc_error += 60;
+#endif
+
+ if (*tune_state == CT_AGC_STEP_1) { /* quickly go to the correct range of the ADC power */
+ if (ABS(adc_error) < 50 || state->agc_step++ > 5) {
+
+#ifdef CONFIG_STANDARD_DAB
+ if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) {
+ dib0090_write_reg(state, 0x02, (1 << 15) | (15 << 11) | (31 << 6) | (63)); /* cap value = 63 : narrow BB filter : Fc = 1.8MHz */
+ dib0090_write_reg(state, 0x04, 0x0);
+ } else
+#endif
+ {
+ dib0090_write_reg(state, 0x02, (1 << 15) | (3 << 11) | (6 << 6) | (32));
+ dib0090_write_reg(state, 0x04, 0x01); /*0 = 1KHz ; 1 = 150Hz ; 2 = 50Hz ; 3 = 50KHz ; 4 = servo fast */
+ }
+
+ *tune_state = CT_AGC_STOP;
+ }
+ } else {
+ /* everything higher than or equal to CT_AGC_STOP means tracking */
+ ret = 100; /* 10ms interval */
+ apply_gain_immediatly = 0;
+ }
+ }
+#ifdef DEBUG_AGC
+ dprintk
+ ("tune state %d, ADC = %3ddB (ADC err %3d) WBD %3ddB (WBD err %3d, WBD val SADC: %4d), RFGainLimit (TOP): %3d, signal: %3ddBm",
+ (u32) *tune_state, (u32) adc, (u32) adc_error, (u32) wbd, (u32) wbd_error, (u32) wbd_val,
+ (u32) state->rf_gain_limit >> WBD_ALPHA, (s32) 200 + adc - (state->current_gain >> GAIN_ALPHA));
+#endif
+ }
+
+ /* apply gain */
+ if (!state->agc_freeze)
+ dib0090_gain_apply(state, adc_error, wbd_error, apply_gain_immediatly);
+ return ret;
+}
+
+EXPORT_SYMBOL(dib0090_gain_control);
+
+void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ if (rf)
+ *rf = state->gain[0];
+ if (bb)
+ *bb = state->gain[1];
+ if (rf_gain_limit)
+ *rf_gain_limit = state->rf_gain_limit;
+ if (rflt)
+ *rflt = (state->rf_lt_def >> 10) & 0x7;
+}
+
+EXPORT_SYMBOL(dib0090_get_current_gain);
+
+u16 dib0090_get_wbd_target(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ u32 f_MHz = state->fe->dtv_property_cache.frequency / 1000000;
+ s32 current_temp = state->temperature;
+ s32 wbd_thot, wbd_tcold;
+ const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
+
+ while (f_MHz > wbd->max_freq)
+ wbd++;
+
+ dprintk("using wbd-table-entry with max freq %d", wbd->max_freq);
+
+ if (current_temp < 0)
+ current_temp = 0;
+ if (current_temp > 128)
+ current_temp = 128;
+
+ state->wbdmux &= ~(7 << 13);
+ if (wbd->wbd_gain != 0)
+ state->wbdmux |= (wbd->wbd_gain << 13);
+ else
+ state->wbdmux |= (4 << 13);
+
+ dib0090_write_reg(state, 0x10, state->wbdmux);
+
+ wbd_thot = wbd->offset_hot - (((u32) wbd->slope_hot * f_MHz) >> 6);
+ wbd_tcold = wbd->offset_cold - (((u32) wbd->slope_cold * f_MHz) >> 6);
+
+ wbd_tcold += ((wbd_thot - wbd_tcold) * current_temp) >> 7;
+
+ state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + wbd_tcold);
+ dprintk("wbd-target: %d dB", (u32) state->wbd_target);
+ dprintk("wbd offset applied is %d", wbd_tcold);
+
+ return state->wbd_offset + wbd_tcold;
+}
+EXPORT_SYMBOL(dib0090_get_wbd_target);
+
+u16 dib0090_get_wbd_offset(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ return state->wbd_offset;
+}
+EXPORT_SYMBOL(dib0090_get_wbd_offset);
+
+int dib0090_set_switch(struct dvb_frontend *fe, u8 sw1, u8 sw2, u8 sw3)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+
+ dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xfff8)
+ | ((sw3 & 1) << 2) | ((sw2 & 1) << 1) | (sw1 & 1));
+
+ return 0;
+}
+EXPORT_SYMBOL(dib0090_set_switch);
+
+int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+
+ dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x7fff)
+ | ((onoff & 1) << 15));
+ return 0;
+}
+EXPORT_SYMBOL(dib0090_set_vga);
+
+int dib0090_update_rframp_7090(struct dvb_frontend *fe, u8 cfg_sensitivity)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+
+ if ((!state->identity.p1g) || (!state->identity.in_soc)
+ || ((state->identity.version != SOC_7090_P1G_21R1)
+ && (state->identity.version != SOC_7090_P1G_11R1))) {
+ dprintk("%s() function can only be used for dib7090P", __func__);
+ return -ENODEV;
+ }
+
+ if (cfg_sensitivity)
+ state->rf_ramp = (const u16 *)&rf_ramp_pwm_cband_7090e_sensitivity;
+ else
+ state->rf_ramp = (const u16 *)&rf_ramp_pwm_cband_7090e_aci;
+ dib0090_pwm_gain_reset(fe);
+
+ return 0;
+}
+EXPORT_SYMBOL(dib0090_update_rframp_7090);
+
+static const u16 dib0090_defaults[] = {
+
+ 25, 0x01,
+ 0x0000,
+ 0x99a0,
+ 0x6008,
+ 0x0000,
+ 0x8bcb,
+ 0x0000,
+ 0x0405,
+ 0x0000,
+ 0x0000,
+ 0x0000,
+ 0xb802,
+ 0x0300,
+ 0x2d12,
+ 0xbac0,
+ 0x7c00,
+ 0xdbb9,
+ 0x0954,
+ 0x0743,
+ 0x8000,
+ 0x0001,
+ 0x0040,
+ 0x0100,
+ 0x0000,
+ 0xe910,
+ 0x149e,
+
+ 1, 0x1c,
+ 0xff2d,
+
+ 1, 0x39,
+ 0x0000,
+
+ 2, 0x1e,
+ 0x07FF,
+ 0x0007,
+
+ 1, 0x24,
+ EN_UHF | EN_CRYSTAL,
+
+ 2, 0x3c,
+ 0x3ff,
+ 0x111,
+ 0
+};
+
+static const u16 dib0090_p1g_additionnal_defaults[] = {
+ 1, 0x05,
+ 0xabcd,
+
+ 1, 0x11,
+ 0x00b4,
+
+ 1, 0x1c,
+ 0xfffd,
+
+ 1, 0x40,
+ 0x108,
+ 0
+};
+
+static void dib0090_set_default_config(struct dib0090_state *state, const u16 * n)
+{
+ u16 l, r;
+
+ l = pgm_read_word(n++);
+ while (l) {
+ r = pgm_read_word(n++);
+ do {
+ dib0090_write_reg(state, r, pgm_read_word(n++));
+ r++;
+ } while (--l);
+ l = pgm_read_word(n++);
+ }
+}
+
+#define CAP_VALUE_MIN (u8) 9
+#define CAP_VALUE_MAX (u8) 40
+#define HR_MIN (u8) 25
+#define HR_MAX (u8) 40
+#define POLY_MIN (u8) 0
+#define POLY_MAX (u8) 8
+
+static void dib0090_set_EFUSE(struct dib0090_state *state)
+{
+ u8 c, h, n;
+ u16 e2, e4;
+ u16 cal;
+
+ e2 = dib0090_read_reg(state, 0x26);
+ e4 = dib0090_read_reg(state, 0x28);
+
+ if ((state->identity.version == P1D_E_F) ||
+ (state->identity.version == P1G) || (e2 == 0xffff)) {
+
+ dib0090_write_reg(state, 0x22, 0x10);
+ cal = (dib0090_read_reg(state, 0x22) >> 6) & 0x3ff;
+
+ if ((cal < 670) || (cal == 1023))
+ cal = 850;
+ n = 165 - ((cal * 10)>>6) ;
+ e2 = e4 = (3<<12) | (34<<6) | (n);
+ }
+
+ if (e2 != e4)
+ e2 &= e4; /* Remove the redundancy */
+
+ if (e2 != 0xffff) {
+ c = e2 & 0x3f;
+ n = (e2 >> 12) & 0xf;
+ h = (e2 >> 6) & 0x3f;
+
+ if ((c >= CAP_VALUE_MAX) || (c <= CAP_VALUE_MIN))
+ c = 32;
+ else
+ c += 14;
+ if ((h >= HR_MAX) || (h <= HR_MIN))
+ h = 34;
+ if ((n >= POLY_MAX) || (n <= POLY_MIN))
+ n = 3;
+
+ dib0090_write_reg(state, 0x13, (h << 10));
+ e2 = (n << 11) | ((h >> 2)<<6) | c;
+ dib0090_write_reg(state, 0x2, e2); /* Load the BB_2 */
+ }
+}
+
+static int dib0090_reset(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+
+ dib0090_reset_digital(fe, state->config);
+ if (dib0090_identify(fe) < 0)
+ return -EIO;
+
+#ifdef CONFIG_TUNER_DIB0090_P1B_SUPPORT
+ if (!(state->identity.version & 0x1)) /* it is P1B - reset is already done */
+ return 0;
+#endif
+
+ if (!state->identity.in_soc) {
+ if ((dib0090_read_reg(state, 0x1a) >> 5) & 0x2)
+ dib0090_write_reg(state, 0x1b, (EN_IQADC | EN_BB | EN_BIAS | EN_DIGCLK | EN_PLL | EN_CRYSTAL));
+ else
+ dib0090_write_reg(state, 0x1b, (EN_DIGCLK | EN_PLL | EN_CRYSTAL));
+ }
+
+ dib0090_set_default_config(state, dib0090_defaults);
+
+ if (state->identity.in_soc)
+ dib0090_write_reg(state, 0x18, 0x2910); /* charge pump current = 0 */
+
+ if (state->identity.p1g)
+ dib0090_set_default_config(state, dib0090_p1g_additionnal_defaults);
+
+ /* Update the efuse : Only available for KROSUS > P1C and SOC as well*/
+ if (((state->identity.version & 0x1f) >= P1D_E_F) || (state->identity.in_soc))
+ dib0090_set_EFUSE(state);
+
+ /* Congigure in function of the crystal */
+ if (state->config->force_crystal_mode != 0)
+ dib0090_write_reg(state, 0x14,
+ state->config->force_crystal_mode & 3);
+ else if (state->config->io.clock_khz >= 24000)
+ dib0090_write_reg(state, 0x14, 1);
+ else
+ dib0090_write_reg(state, 0x14, 2);
+ dprintk("Pll lock : %d", (dib0090_read_reg(state, 0x1a) >> 11) & 0x1);
+
+ state->calibrate = DC_CAL | WBD_CAL | TEMP_CAL; /* enable iq-offset-calibration and wbd-calibration when tuning next time */
+
+ return 0;
+}
+
+#define steps(u) (((u) > 15) ? ((u)-16) : (u))
+#define INTERN_WAIT 10
+static int dib0090_get_offset(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+ int ret = INTERN_WAIT * 10;
+
+ switch (*tune_state) {
+ case CT_TUNER_STEP_2:
+ /* Turns to positive */
+ dib0090_write_reg(state, 0x1f, 0x7);
+ *tune_state = CT_TUNER_STEP_3;
+ break;
+
+ case CT_TUNER_STEP_3:
+ state->adc_diff = dib0090_read_reg(state, 0x1d);
+
+ /* Turns to negative */
+ dib0090_write_reg(state, 0x1f, 0x4);
+ *tune_state = CT_TUNER_STEP_4;
+ break;
+
+ case CT_TUNER_STEP_4:
+ state->adc_diff -= dib0090_read_reg(state, 0x1d);
+ *tune_state = CT_TUNER_STEP_5;
+ ret = 0;
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+struct dc_calibration {
+ u8 addr;
+ u8 offset;
+ u8 pga:1;
+ u16 bb1;
+ u8 i:1;
+};
+
+static const struct dc_calibration dc_table[] = {
+ /* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */
+ {0x06, 5, 1, (1 << 13) | (0 << 8) | (26 << 3), 1},
+ {0x07, 11, 1, (1 << 13) | (0 << 8) | (26 << 3), 0},
+ /* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */
+ {0x06, 0, 0, (1 << 13) | (29 << 8) | (26 << 3), 1},
+ {0x06, 10, 0, (1 << 13) | (29 << 8) | (26 << 3), 0},
+ {0},
+};
+
+static const struct dc_calibration dc_p1g_table[] = {
+ /* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */
+ /* addr ; trim reg offset ; pga ; CTRL_BB1 value ; i or q */
+ {0x06, 5, 1, (1 << 13) | (0 << 8) | (15 << 3), 1},
+ {0x07, 11, 1, (1 << 13) | (0 << 8) | (15 << 3), 0},
+ /* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */
+ {0x06, 0, 0, (1 << 13) | (29 << 8) | (15 << 3), 1},
+ {0x06, 10, 0, (1 << 13) | (29 << 8) | (15 << 3), 0},
+ {0},
+};
+
+static void dib0090_set_trim(struct dib0090_state *state)
+{
+ u16 *val;
+
+ if (state->dc->addr == 0x07)
+ val = &state->bb7;
+ else
+ val = &state->bb6;
+
+ *val &= ~(0x1f << state->dc->offset);
+ *val |= state->step << state->dc->offset;
+
+ dib0090_write_reg(state, state->dc->addr, *val);
+}
+
+static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+ int ret = 0;
+ u16 reg;
+
+ switch (*tune_state) {
+ case CT_TUNER_START:
+ dprintk("Start DC offset calibration");
+
+ /* force vcm2 = 0.8V */
+ state->bb6 = 0;
+ state->bb7 = 0x040d;
+
+ /* the LNA AND LO are off */
+ reg = dib0090_read_reg(state, 0x24) & 0x0ffb; /* shutdown lna and lo */
+ dib0090_write_reg(state, 0x24, reg);
+
+ state->wbdmux = dib0090_read_reg(state, 0x10);
+ dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x7 << 3) | 0x3);
+ dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14));
+
+ state->dc = dc_table;
+
+ if (state->identity.p1g)
+ state->dc = dc_p1g_table;
+ *tune_state = CT_TUNER_STEP_0;
+
+ /* fall through */
+
+ case CT_TUNER_STEP_0:
+ dprintk("Sart/continue DC calibration for %s path", (state->dc->i == 1) ? "I" : "Q");
+ dib0090_write_reg(state, 0x01, state->dc->bb1);
+ dib0090_write_reg(state, 0x07, state->bb7 | (state->dc->i << 7));
+
+ state->step = 0;
+ state->min_adc_diff = 1023;
+ *tune_state = CT_TUNER_STEP_1;
+ ret = 50;
+ break;
+
+ case CT_TUNER_STEP_1:
+ dib0090_set_trim(state);
+ *tune_state = CT_TUNER_STEP_2;
+ break;
+
+ case CT_TUNER_STEP_2:
+ case CT_TUNER_STEP_3:
+ case CT_TUNER_STEP_4:
+ ret = dib0090_get_offset(state, tune_state);
+ break;
+
+ case CT_TUNER_STEP_5: /* found an offset */
+ dprintk("adc_diff = %d, current step= %d", (u32) state->adc_diff, state->step);
+ if (state->step == 0 && state->adc_diff < 0) {
+ state->min_adc_diff = -1023;
+ dprintk("Change of sign of the minimum adc diff");
+ }
+
+ dprintk("adc_diff = %d, min_adc_diff = %d current_step = %d", state->adc_diff, state->min_adc_diff, state->step);
+
+ /* first turn for this frequency */
+ if (state->step == 0) {
+ if (state->dc->pga && state->adc_diff < 0)
+ state->step = 0x10;
+ if (state->dc->pga == 0 && state->adc_diff > 0)
+ state->step = 0x10;
+ }
+
+ /* Look for a change of Sign in the Adc_diff.min_adc_diff is used to STORE the setp N-1 */
+ if ((state->adc_diff & 0x8000) == (state->min_adc_diff & 0x8000) && steps(state->step) < 15) {
+ /* stop search when the delta the sign is changing and Steps =15 and Step=0 is force for continuance */
+ state->step++;
+ state->min_adc_diff = state->adc_diff;
+ *tune_state = CT_TUNER_STEP_1;
+ } else {
+ /* the minimum was what we have seen in the step before */
+ if (ABS(state->adc_diff) > ABS(state->min_adc_diff)) {
+ dprintk("Since adc_diff N = %d > adc_diff step N-1 = %d, Come back one step", state->adc_diff, state->min_adc_diff);
+ state->step--;
+ }
+
+ dib0090_set_trim(state);
+ dprintk("BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd", state->dc->addr, state->adc_diff, state->step);
+
+ state->dc++;
+ if (state->dc->addr == 0) /* done */
+ *tune_state = CT_TUNER_STEP_6;
+ else
+ *tune_state = CT_TUNER_STEP_0;
+
+ }
+ break;
+
+ case CT_TUNER_STEP_6:
+ dib0090_write_reg(state, 0x07, state->bb7 & ~0x0008);
+ dib0090_write_reg(state, 0x1f, 0x7);
+ *tune_state = CT_TUNER_START; /* reset done -> real tuning can now begin */
+ state->calibrate &= ~DC_CAL;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static int dib0090_wbd_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+ u8 wbd_gain;
+ const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
+
+ switch (*tune_state) {
+ case CT_TUNER_START:
+ while (state->current_rf / 1000 > wbd->max_freq)
+ wbd++;
+ if (wbd->wbd_gain != 0)
+ wbd_gain = wbd->wbd_gain;
+ else {
+ wbd_gain = 4;
+#if defined(CONFIG_BAND_LBAND) || defined(CONFIG_BAND_SBAND)
+ if ((state->current_band == BAND_LBAND) || (state->current_band == BAND_SBAND))
+ wbd_gain = 2;
+#endif
+ }
+
+ if (wbd_gain == state->wbd_calibration_gain) { /* the WBD calibration has already been done */
+ *tune_state = CT_TUNER_START;
+ state->calibrate &= ~WBD_CAL;
+ return 0;
+ }
+
+ dib0090_write_reg(state, 0x10, 0x1b81 | (1 << 10) | (wbd_gain << 13) | (1 << 3));
+
+ dib0090_write_reg(state, 0x24, ((EN_UHF & 0x0fff) | (1 << 1)));
+ *tune_state = CT_TUNER_STEP_0;
+ state->wbd_calibration_gain = wbd_gain;
+ return 90; /* wait for the WBDMUX to switch and for the ADC to sample */
+
+ case CT_TUNER_STEP_0:
+ state->wbd_offset = dib0090_get_slow_adc_val(state);
+ dprintk("WBD calibration offset = %d", state->wbd_offset);
+ *tune_state = CT_TUNER_START; /* reset done -> real tuning can now begin */
+ state->calibrate &= ~WBD_CAL;
+ break;
+
+ default:
+ break;
+ }
+ return 0;
+}
+
+static void dib0090_set_bandwidth(struct dib0090_state *state)
+{
+ u16 tmp;
+
+ if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 5000)
+ tmp = (3 << 14);
+ else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 6000)
+ tmp = (2 << 14);
+ else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 7000)
+ tmp = (1 << 14);
+ else
+ tmp = (0 << 14);
+
+ state->bb_1_def &= 0x3fff;
+ state->bb_1_def |= tmp;
+
+ dib0090_write_reg(state, 0x01, state->bb_1_def); /* be sure that we have the right bb-filter */
+
+ dib0090_write_reg(state, 0x03, 0x6008); /* = 0x6008 : vcm3_trim = 1 ; filter2_gm1_trim = 8 ; filter2_cutoff_freq = 0 */
+ dib0090_write_reg(state, 0x04, 0x1); /* 0 = 1KHz ; 1 = 50Hz ; 2 = 150Hz ; 3 = 50KHz ; 4 = servo fast */
+ if (state->identity.in_soc) {
+ dib0090_write_reg(state, 0x05, 0x9bcf); /* attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 1 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 15 */
+ } else {
+ dib0090_write_reg(state, 0x02, (5 << 11) | (8 << 6) | (22 & 0x3f)); /* 22 = cap_value */
+ dib0090_write_reg(state, 0x05, 0xabcd); /* = 0xabcd : attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 2 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 13 */
+ }
+}
+
+static const struct dib0090_pll dib0090_pll_table[] = {
+#ifdef CONFIG_BAND_CBAND
+ {56000, 0, 9, 48, 6},
+ {70000, 1, 9, 48, 6},
+ {87000, 0, 8, 32, 4},
+ {105000, 1, 8, 32, 4},
+ {115000, 0, 7, 24, 6},
+ {140000, 1, 7, 24, 6},
+ {170000, 0, 6, 16, 4},
+#endif
+#ifdef CONFIG_BAND_VHF
+ {200000, 1, 6, 16, 4},
+ {230000, 0, 5, 12, 6},
+ {280000, 1, 5, 12, 6},
+ {340000, 0, 4, 8, 4},
+ {380000, 1, 4, 8, 4},
+ {450000, 0, 3, 6, 6},
+#endif
+#ifdef CONFIG_BAND_UHF
+ {580000, 1, 3, 6, 6},
+ {700000, 0, 2, 4, 4},
+ {860000, 1, 2, 4, 4},
+#endif
+#ifdef CONFIG_BAND_LBAND
+ {1800000, 1, 0, 2, 4},
+#endif
+#ifdef CONFIG_BAND_SBAND
+ {2900000, 0, 14, 1, 4},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table_fm_vhf_on_cband[] = {
+
+#ifdef CONFIG_BAND_CBAND
+ {184000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+ {227000, 4, 3, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+ {380000, 4, 7, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_UHF
+ {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+ {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+ {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+ {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table[] = {
+
+#ifdef CONFIG_BAND_CBAND
+ {170000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_VHF
+ {184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+ {227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+ {380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+#endif
+#ifdef CONFIG_BAND_UHF
+ {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+ {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+ {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+ {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_p1g_tuning_table[] = {
+#ifdef CONFIG_BAND_CBAND
+ {170000, 4, 1, 0x820f, 0x300, 0x2d22, 0x82cb, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_VHF
+ {184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+ {227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+ {380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+#endif
+#ifdef CONFIG_BAND_UHF
+ {510000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {540000, 2, 1, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {600000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {630000, 2, 4, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {680000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {720000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+ {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+ {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+ {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_pll dib0090_p1g_pll_table[] = {
+#ifdef CONFIG_BAND_CBAND
+ {57000, 0, 11, 48, 6},
+ {70000, 1, 11, 48, 6},
+ {86000, 0, 10, 32, 4},
+ {105000, 1, 10, 32, 4},
+ {115000, 0, 9, 24, 6},
+ {140000, 1, 9, 24, 6},
+ {170000, 0, 8, 16, 4},
+#endif
+#ifdef CONFIG_BAND_VHF
+ {200000, 1, 8, 16, 4},
+ {230000, 0, 7, 12, 6},
+ {280000, 1, 7, 12, 6},
+ {340000, 0, 6, 8, 4},
+ {380000, 1, 6, 8, 4},
+ {455000, 0, 5, 6, 6},
+#endif
+#ifdef CONFIG_BAND_UHF
+ {580000, 1, 5, 6, 6},
+ {680000, 0, 4, 4, 4},
+ {860000, 1, 4, 4, 4},
+#endif
+#ifdef CONFIG_BAND_LBAND
+ {1800000, 1, 2, 2, 4},
+#endif
+#ifdef CONFIG_BAND_SBAND
+ {2900000, 0, 1, 1, 6},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_p1g_tuning_table_fm_vhf_on_cband[] = {
+#ifdef CONFIG_BAND_CBAND
+ {184000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
+ {227000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
+ {380000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_UHF
+ {520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+ {900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+ {1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+ {1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+ {2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+ {2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table_cband_7090[] = {
+#ifdef CONFIG_BAND_CBAND
+ {300000, 4, 3, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+ {380000, 4, 10, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+ {570000, 4, 10, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+ {858000, 4, 5, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table_cband_7090e_sensitivity[] = {
+#ifdef CONFIG_BAND_CBAND
+ { 300000, 0 , 3, 0x8105, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
+ { 380000, 0 , 10, 0x810F, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
+ { 600000, 0 , 10, 0x815E, 0x280, 0x2d12, 0xb84e, EN_CAB },
+ { 660000, 0 , 5, 0x85E3, 0x280, 0x2d12, 0xb84e, EN_CAB },
+ { 720000, 0 , 5, 0x852E, 0x280, 0x2d12, 0xb84e, EN_CAB },
+ { 860000, 0 , 4, 0x85E5, 0x280, 0x2d12, 0xb84e, EN_CAB },
+#endif
+};
+
+int dib0090_update_tuning_table_7090(struct dvb_frontend *fe,
+ u8 cfg_sensitivity)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ const struct dib0090_tuning *tune =
+ dib0090_tuning_table_cband_7090e_sensitivity;
+ const struct dib0090_tuning dib0090_tuning_table_cband_7090e_aci[] = {
+ { 300000, 0 , 3, 0x8165, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
+ { 650000, 0 , 4, 0x815B, 0x280, 0x2d12, 0xb84e, EN_CAB },
+ { 860000, 0 , 5, 0x84EF, 0x280, 0x2d12, 0xb84e, EN_CAB },
+ };
+
+ if ((!state->identity.p1g) || (!state->identity.in_soc)
+ || ((state->identity.version != SOC_7090_P1G_21R1)
+ && (state->identity.version != SOC_7090_P1G_11R1))) {
+ dprintk("%s() function can only be used for dib7090", __func__);
+ return -ENODEV;
+ }
+
+ if (cfg_sensitivity)
+ tune = dib0090_tuning_table_cband_7090e_sensitivity;
+ else
+ tune = dib0090_tuning_table_cband_7090e_aci;
+
+ while (state->rf_request > tune->max_freq)
+ tune++;
+
+ dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x8000)
+ | (tune->lna_bias & 0x7fff));
+ dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xf83f)
+ | ((tune->lna_tune << 6) & 0x07c0));
+ return 0;
+}
+EXPORT_SYMBOL(dib0090_update_tuning_table_7090);
+
+static int dib0090_captrim_search(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+ int ret = 0;
+ u16 lo4 = 0xe900;
+
+ s16 adc_target;
+ u16 adc;
+ s8 step_sign;
+ u8 force_soft_search = 0;
+
+ if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
+ force_soft_search = 1;
+
+ if (*tune_state == CT_TUNER_START) {
+ dprintk("Start Captrim search : %s", (force_soft_search == 1) ? "FORCE SOFT SEARCH" : "AUTO");
+ dib0090_write_reg(state, 0x10, 0x2B1);
+ dib0090_write_reg(state, 0x1e, 0x0032);
+
+ if (!state->tuner_is_tuned) {
+ /* prepare a complete captrim */
+ if (!state->identity.p1g || force_soft_search)
+ state->step = state->captrim = state->fcaptrim = 64;
+
+ state->current_rf = state->rf_request;
+ } else { /* we are already tuned to this frequency - the configuration is correct */
+ if (!state->identity.p1g || force_soft_search) {
+ /* do a minimal captrim even if the frequency has not changed */
+ state->step = 4;
+ state->captrim = state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7f;
+ }
+ }
+ state->adc_diff = 3000;
+ *tune_state = CT_TUNER_STEP_0;
+
+ } else if (*tune_state == CT_TUNER_STEP_0) {
+ if (state->identity.p1g && !force_soft_search) {
+ u8 ratio = 31;
+
+ dib0090_write_reg(state, 0x40, (3 << 7) | (ratio << 2) | (1 << 1) | 1);
+ dib0090_read_reg(state, 0x40);
+ ret = 50;
+ } else {
+ state->step /= 2;
+ dib0090_write_reg(state, 0x18, lo4 | state->captrim);
+
+ if (state->identity.in_soc)
+ ret = 25;
+ }
+ *tune_state = CT_TUNER_STEP_1;
+
+ } else if (*tune_state == CT_TUNER_STEP_1) {
+ if (state->identity.p1g && !force_soft_search) {
+ dib0090_write_reg(state, 0x40, 0x18c | (0 << 1) | 0);
+ dib0090_read_reg(state, 0x40);
+
+ state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7F;
+ dprintk("***Final Captrim= 0x%x", state->fcaptrim);
+ *tune_state = CT_TUNER_STEP_3;
+
+ } else {
+ /* MERGE for all krosus before P1G */
+ adc = dib0090_get_slow_adc_val(state);
+ dprintk("CAPTRIM=%d; ADC = %d (ADC) & %dmV", (u32) state->captrim, (u32) adc, (u32) (adc) * (u32) 1800 / (u32) 1024);
+
+ if (state->rest == 0 || state->identity.in_soc) { /* Just for 8090P SOCS where auto captrim HW bug : TO CHECK IN ACI for SOCS !!! if 400 for 8090p SOC => tune issue !!! */
+ adc_target = 200;
+ } else
+ adc_target = 400;
+
+ if (adc >= adc_target) {
+ adc -= adc_target;
+ step_sign = -1;
+ } else {
+ adc = adc_target - adc;
+ step_sign = 1;
+ }
+
+ if (adc < state->adc_diff) {
+ dprintk("CAPTRIM=%d is closer to target (%d/%d)", (u32) state->captrim, (u32) adc, (u32) state->adc_diff);
+ state->adc_diff = adc;
+ state->fcaptrim = state->captrim;
+ }
+
+ state->captrim += step_sign * state->step;
+ if (state->step >= 1)
+ *tune_state = CT_TUNER_STEP_0;
+ else
+ *tune_state = CT_TUNER_STEP_2;
+
+ ret = 25;
+ }
+ } else if (*tune_state == CT_TUNER_STEP_2) { /* this step is only used by krosus < P1G */
+ /*write the final cptrim config */
+ dib0090_write_reg(state, 0x18, lo4 | state->fcaptrim);
+
+ *tune_state = CT_TUNER_STEP_3;
+
+ } else if (*tune_state == CT_TUNER_STEP_3) {
+ state->calibrate &= ~CAPTRIM_CAL;
+ *tune_state = CT_TUNER_STEP_0;
+ }
+
+ return ret;
+}
+
+static int dib0090_get_temperature(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+ int ret = 15;
+ s16 val;
+
+ switch (*tune_state) {
+ case CT_TUNER_START:
+ state->wbdmux = dib0090_read_reg(state, 0x10);
+ dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x8 << 3));
+
+ state->bias = dib0090_read_reg(state, 0x13);
+ dib0090_write_reg(state, 0x13, state->bias | (0x3 << 8));
+
+ *tune_state = CT_TUNER_STEP_0;
+ /* wait for the WBDMUX to switch and for the ADC to sample */
+ break;
+
+ case CT_TUNER_STEP_0:
+ state->adc_diff = dib0090_get_slow_adc_val(state);
+ dib0090_write_reg(state, 0x13, (state->bias & ~(0x3 << 8)) | (0x2 << 8));
+ *tune_state = CT_TUNER_STEP_1;
+ break;
+
+ case CT_TUNER_STEP_1:
+ val = dib0090_get_slow_adc_val(state);
+ state->temperature = ((s16) ((val - state->adc_diff) * 180) >> 8) + 55;
+
+ dprintk("temperature: %d C", state->temperature - 30);
+
+ *tune_state = CT_TUNER_STEP_2;
+ break;
+
+ case CT_TUNER_STEP_2:
+ dib0090_write_reg(state, 0x13, state->bias);
+ dib0090_write_reg(state, 0x10, state->wbdmux); /* write back original WBDMUX */
+
+ *tune_state = CT_TUNER_START;
+ state->calibrate &= ~TEMP_CAL;
+ if (state->config->analog_output == 0)
+ dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
+
+ break;
+
+ default:
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+#define WBD 0x781 /* 1 1 1 1 0000 0 0 1 */
+static int dib0090_tune(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ const struct dib0090_tuning *tune = state->current_tune_table_index;
+ const struct dib0090_pll *pll = state->current_pll_table_index;
+ enum frontend_tune_state *tune_state = &state->tune_state;
+
+ u16 lo5, lo6, Den, tmp;
+ u32 FBDiv, Rest, FREF, VCOF_kHz = 0;
+ int ret = 10; /* 1ms is the default delay most of the time */
+ u8 c, i;
+
+ /************************* VCO ***************************/
+ /* Default values for FG */
+ /* from these are needed : */
+ /* Cp,HFdiv,VCOband,SD,Num,Den,FB and REFDiv */
+
+ /* in any case we first need to do a calibration if needed */
+ if (*tune_state == CT_TUNER_START) {
+ /* deactivate DataTX before some calibrations */
+ if (state->calibrate & (DC_CAL | TEMP_CAL | WBD_CAL))
+ dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14));
+ else
+ /* Activate DataTX in case a calibration has been done before */
+ if (state->config->analog_output == 0)
+ dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
+ }
+
+ if (state->calibrate & DC_CAL)
+ return dib0090_dc_offset_calibration(state, tune_state);
+ else if (state->calibrate & WBD_CAL) {
+ if (state->current_rf == 0)
+ state->current_rf = state->fe->dtv_property_cache.frequency / 1000;
+ return dib0090_wbd_calibration(state, tune_state);
+ } else if (state->calibrate & TEMP_CAL)
+ return dib0090_get_temperature(state, tune_state);
+ else if (state->calibrate & CAPTRIM_CAL)
+ return dib0090_captrim_search(state, tune_state);
+
+ if (*tune_state == CT_TUNER_START) {
+ /* if soc and AGC pwm control, disengage mux to be able to R/W access to 0x01 register to set the right filter (cutoff_freq_select) during the tune sequence, otherwise, SOC SERPAR error when accessing to 0x01 */
+ if (state->config->use_pwm_agc && state->identity.in_soc) {
+ tmp = dib0090_read_reg(state, 0x39);
+ if ((tmp >> 10) & 0x1)
+ dib0090_write_reg(state, 0x39, tmp & ~(1 << 10));
+ }
+
+ state->current_band = (u8) BAND_OF_FREQUENCY(state->fe->dtv_property_cache.frequency / 1000);
+ state->rf_request =
+ state->fe->dtv_property_cache.frequency / 1000 + (state->current_band ==
+ BAND_UHF ? state->config->freq_offset_khz_uhf : state->config->
+ freq_offset_khz_vhf);
+
+ /* in ISDB-T 1seg we shift tuning frequency */
+ if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1
+ && state->fe->dtv_property_cache.isdbt_partial_reception == 0)) {
+ const struct dib0090_low_if_offset_table *LUT_offset = state->config->low_if;
+ u8 found_offset = 0;
+ u32 margin_khz = 100;
+
+ if (LUT_offset != NULL) {
+ while (LUT_offset->RF_freq != 0xffff) {
+ if (((state->rf_request > (LUT_offset->RF_freq - margin_khz))
+ && (state->rf_request < (LUT_offset->RF_freq + margin_khz)))
+ && LUT_offset->std == state->fe->dtv_property_cache.delivery_system) {
+ state->rf_request += LUT_offset->offset_khz;
+ found_offset = 1;
+ break;
+ }
+ LUT_offset++;
+ }
+ }
+
+ if (found_offset == 0)
+ state->rf_request += 400;
+ }
+ if (state->current_rf != state->rf_request || (state->current_standard != state->fe->dtv_property_cache.delivery_system)) {
+ state->tuner_is_tuned = 0;
+ state->current_rf = 0;
+ state->current_standard = 0;
+
+ tune = dib0090_tuning_table;
+ if (state->identity.p1g)
+ tune = dib0090_p1g_tuning_table;
+
+ tmp = (state->identity.version >> 5) & 0x7;
+
+ if (state->identity.in_soc) {
+ if (state->config->force_cband_input) { /* Use the CBAND input for all band */
+ if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF
+ || state->current_band & BAND_UHF) {
+ state->current_band = BAND_CBAND;
+ if (state->config->is_dib7090e)
+ tune = dib0090_tuning_table_cband_7090e_sensitivity;
+ else
+ tune = dib0090_tuning_table_cband_7090;
+ }
+ } else { /* Use the CBAND input for all band under UHF */
+ if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF) {
+ state->current_band = BAND_CBAND;
+ if (state->config->is_dib7090e)
+ tune = dib0090_tuning_table_cband_7090e_sensitivity;
+ else
+ tune = dib0090_tuning_table_cband_7090;
+ }
+ }
+ } else
+ if (tmp == 0x4 || tmp == 0x7) {
+ /* CBAND tuner version for VHF */
+ if (state->current_band == BAND_FM || state->current_band == BAND_CBAND || state->current_band == BAND_VHF) {
+ state->current_band = BAND_CBAND; /* Force CBAND */
+
+ tune = dib0090_tuning_table_fm_vhf_on_cband;
+ if (state->identity.p1g)
+ tune = dib0090_p1g_tuning_table_fm_vhf_on_cband;
+ }
+ }
+
+ pll = dib0090_pll_table;
+ if (state->identity.p1g)
+ pll = dib0090_p1g_pll_table;
+
+ /* Look for the interval */
+ while (state->rf_request > tune->max_freq)
+ tune++;
+ while (state->rf_request > pll->max_freq)
+ pll++;
+
+ state->current_tune_table_index = tune;
+ state->current_pll_table_index = pll;
+
+ dib0090_write_reg(state, 0x0b, 0xb800 | (tune->switch_trim));
+
+ VCOF_kHz = (pll->hfdiv * state->rf_request) * 2;
+
+ FREF = state->config->io.clock_khz;
+ if (state->config->fref_clock_ratio != 0)
+ FREF /= state->config->fref_clock_ratio;
+
+ FBDiv = (VCOF_kHz / pll->topresc / FREF);
+ Rest = (VCOF_kHz / pll->topresc) - FBDiv * FREF;
+
+ if (Rest < LPF)
+ Rest = 0;
+ else if (Rest < 2 * LPF)
+ Rest = 2 * LPF;
+ else if (Rest > (FREF - LPF)) {
+ Rest = 0;
+ FBDiv += 1;
+ } else if (Rest > (FREF - 2 * LPF))
+ Rest = FREF - 2 * LPF;
+ Rest = (Rest * 6528) / (FREF / 10);
+ state->rest = Rest;
+
+ /* external loop filter, otherwise:
+ * lo5 = (0 << 15) | (0 << 12) | (0 << 11) | (3 << 9) | (4 << 6) | (3 << 4) | 4;
+ * lo6 = 0x0e34 */
+
+ if (Rest == 0) {
+ if (pll->vco_band)
+ lo5 = 0x049f;
+ else
+ lo5 = 0x041f;
+ } else {
+ if (pll->vco_band)
+ lo5 = 0x049e;
+ else if (state->config->analog_output)
+ lo5 = 0x041d;
+ else
+ lo5 = 0x041c;
+ }
+
+ if (state->identity.p1g) { /* Bias is done automatically in P1G */
+ if (state->identity.in_soc) {
+ if (state->identity.version == SOC_8090_P1G_11R1)
+ lo5 = 0x46f;
+ else
+ lo5 = 0x42f;
+ } else
+ lo5 = 0x42c;
+ }
+
+ lo5 |= (pll->hfdiv_code << 11) | (pll->vco_band << 7); /* bit 15 is the split to the slave, we do not do it here */
+
+ if (!state->config->io.pll_int_loop_filt) {
+ if (state->identity.in_soc)
+ lo6 = 0xff98;
+ else if (state->identity.p1g || (Rest == 0))
+ lo6 = 0xfff8;
+ else
+ lo6 = 0xff28;
+ } else
+ lo6 = (state->config->io.pll_int_loop_filt << 3);
+
+ Den = 1;
+
+ if (Rest > 0) {
+ if (state->config->analog_output)
+ lo6 |= (1 << 2) | 2;
+ else {
+ if (state->identity.in_soc)
+ lo6 |= (1 << 2) | 2;
+ else
+ lo6 |= (1 << 2) | 2;
+ }
+ Den = 255;
+ }
+ dib0090_write_reg(state, 0x15, (u16) FBDiv);
+ if (state->config->fref_clock_ratio != 0)
+ dib0090_write_reg(state, 0x16, (Den << 8) | state->config->fref_clock_ratio);
+ else
+ dib0090_write_reg(state, 0x16, (Den << 8) | 1);
+ dib0090_write_reg(state, 0x17, (u16) Rest);
+ dib0090_write_reg(state, 0x19, lo5);
+ dib0090_write_reg(state, 0x1c, lo6);
+
+ lo6 = tune->tuner_enable;
+ if (state->config->analog_output)
+ lo6 = (lo6 & 0xff9f) | 0x2;
+
+ dib0090_write_reg(state, 0x24, lo6 | EN_LO | state->config->use_pwm_agc * EN_CRYSTAL);
+
+ }
+
+ state->current_rf = state->rf_request;
+ state->current_standard = state->fe->dtv_property_cache.delivery_system;
+
+ ret = 20;
+ state->calibrate = CAPTRIM_CAL; /* captrim serach now */
+ }
+
+ else if (*tune_state == CT_TUNER_STEP_0) { /* Warning : because of captrim cal, if you change this step, change it also in _cal.c file because it is the step following captrim cal state machine */
+ const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
+
+ while (state->current_rf / 1000 > wbd->max_freq)
+ wbd++;
+
+ dib0090_write_reg(state, 0x1e, 0x07ff);
+ dprintk("Final Captrim: %d", (u32) state->fcaptrim);
+ dprintk("HFDIV code: %d", (u32) pll->hfdiv_code);
+ dprintk("VCO = %d", (u32) pll->vco_band);
+ dprintk("VCOF in kHz: %d ((%d*%d) << 1))", (u32) ((pll->hfdiv * state->rf_request) * 2), (u32) pll->hfdiv, (u32) state->rf_request);
+ dprintk("REFDIV: %d, FREF: %d", (u32) 1, (u32) state->config->io.clock_khz);
+ dprintk("FBDIV: %d, Rest: %d", (u32) dib0090_read_reg(state, 0x15), (u32) dib0090_read_reg(state, 0x17));
+ dprintk("Num: %d, Den: %d, SD: %d", (u32) dib0090_read_reg(state, 0x17), (u32) (dib0090_read_reg(state, 0x16) >> 8),
+ (u32) dib0090_read_reg(state, 0x1c) & 0x3);
+
+#define WBD 0x781 /* 1 1 1 1 0000 0 0 1 */
+ c = 4;
+ i = 3;
+
+ if (wbd->wbd_gain != 0)
+ c = wbd->wbd_gain;
+
+ state->wbdmux = (c << 13) | (i << 11) | (WBD | (state->config->use_pwm_agc << 1));
+ dib0090_write_reg(state, 0x10, state->wbdmux);
+
+ if ((tune->tuner_enable == EN_CAB) && state->identity.p1g) {
+ dprintk("P1G : The cable band is selected and lna_tune = %d", tune->lna_tune);
+ dib0090_write_reg(state, 0x09, tune->lna_bias);
+ dib0090_write_reg(state, 0x0b, 0xb800 | (tune->lna_tune << 6) | (tune->switch_trim));
+ } else
+ dib0090_write_reg(state, 0x09, (tune->lna_tune << 5) | tune->lna_bias);
+
+ dib0090_write_reg(state, 0x0c, tune->v2i);
+ dib0090_write_reg(state, 0x0d, tune->mix);
+ dib0090_write_reg(state, 0x0e, tune->load);
+ *tune_state = CT_TUNER_STEP_1;
+
+ } else if (*tune_state == CT_TUNER_STEP_1) {
+ /* initialize the lt gain register */
+ state->rf_lt_def = 0x7c00;
+
+ dib0090_set_bandwidth(state);
+ state->tuner_is_tuned = 1;
+
+ state->calibrate |= WBD_CAL;
+ state->calibrate |= TEMP_CAL;
+ *tune_state = CT_TUNER_STOP;
+ } else
+ ret = FE_CALLBACK_TIME_NEVER;
+ return ret;
+}
+
+static int dib0090_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+
+ return state->tune_state;
+}
+
+EXPORT_SYMBOL(dib0090_get_tune_state);
+
+int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+
+ state->tune_state = tune_state;
+ return 0;
+}
+
+EXPORT_SYMBOL(dib0090_set_tune_state);
+
+static int dib0090_get_frequency(struct dvb_frontend *fe, u32 * frequency)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+
+ *frequency = 1000 * state->current_rf;
+ return 0;
+}
+
+static int dib0090_set_params(struct dvb_frontend *fe)
+{
+ struct dib0090_state *state = fe->tuner_priv;
+ u32 ret;
+
+ state->tune_state = CT_TUNER_START;
+
+ do {
+ ret = dib0090_tune(fe);
+ if (ret == FE_CALLBACK_TIME_NEVER)
+ break;
+
+ /*
+ * Despite dib0090_tune returns time at a 0.1 ms range,
+ * the actual sleep time depends on CONFIG_HZ. The worse case
+ * is when CONFIG_HZ=100. In such case, the minimum granularity
+ * is 10ms. On some real field tests, the tuner sometimes don't
+ * lock when this timer is lower than 10ms. So, enforce a 10ms
+ * granularity and use usleep_range() instead of msleep().
+ */
+ ret = 10 * (ret + 99)/100;
+ usleep_range(ret * 1000, (ret + 1) * 1000);
+ } while (state->tune_state != CT_TUNER_STOP);
+
+ return 0;
+}
+
+static const struct dvb_tuner_ops dib0090_ops = {
+ .info = {
+ .name = "DiBcom DiB0090",
+ .frequency_min = 45000000,
+ .frequency_max = 860000000,
+ .frequency_step = 1000,
+ },
+ .release = dib0090_release,
+
+ .init = dib0090_wakeup,
+ .sleep = dib0090_sleep,
+ .set_params = dib0090_set_params,
+ .get_frequency = dib0090_get_frequency,
+};
+
+static const struct dvb_tuner_ops dib0090_fw_ops = {
+ .info = {
+ .name = "DiBcom DiB0090",
+ .frequency_min = 45000000,
+ .frequency_max = 860000000,
+ .frequency_step = 1000,
+ },
+ .release = dib0090_release,
+
+ .init = NULL,
+ .sleep = NULL,
+ .set_params = NULL,
+ .get_frequency = NULL,
+};
+
+static const struct dib0090_wbd_slope dib0090_wbd_table_default[] = {
+ {470, 0, 250, 0, 100, 4},
+ {860, 51, 866, 21, 375, 4},
+ {1700, 0, 800, 0, 850, 4},
+ {2900, 0, 250, 0, 100, 6},
+ {0xFFFF, 0, 0, 0, 0, 0},
+};
+
+struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config)
+{
+ struct dib0090_state *st = kzalloc(sizeof(struct dib0090_state), GFP_KERNEL);
+ if (st == NULL)
+ return NULL;
+
+ st->config = config;
+ st->i2c = i2c;
+ st->fe = fe;
+ mutex_init(&st->i2c_buffer_lock);
+ fe->tuner_priv = st;
+
+ if (config->wbd == NULL)
+ st->current_wbd_table = dib0090_wbd_table_default;
+ else
+ st->current_wbd_table = config->wbd;
+
+ if (dib0090_reset(fe) != 0)
+ goto free_mem;
+
+ printk(KERN_INFO "DiB0090: successfully identified\n");
+ memcpy(&fe->ops.tuner_ops, &dib0090_ops, sizeof(struct dvb_tuner_ops));
+
+ return fe;
+ free_mem:
+ kfree(st);
+ fe->tuner_priv = NULL;
+ return NULL;
+}
+
+EXPORT_SYMBOL(dib0090_register);
+
+struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config)
+{
+ struct dib0090_fw_state *st = kzalloc(sizeof(struct dib0090_fw_state), GFP_KERNEL);
+ if (st == NULL)
+ return NULL;
+
+ st->config = config;
+ st->i2c = i2c;
+ st->fe = fe;
+ mutex_init(&st->i2c_buffer_lock);
+ fe->tuner_priv = st;
+
+ if (dib0090_fw_reset_digital(fe, st->config) != 0)
+ goto free_mem;
+
+ dprintk("DiB0090 FW: successfully identified");
+ memcpy(&fe->ops.tuner_ops, &dib0090_fw_ops, sizeof(struct dvb_tuner_ops));
+
+ return fe;
+free_mem:
+ kfree(st);
+ fe->tuner_priv = NULL;
+ return NULL;
+}
+EXPORT_SYMBOL(dib0090_fw_register);
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Olivier Grenie <olivier.grenie@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 0090 base-band RF Tuner");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-19 23:53:12 +0000