diff options
Diffstat (limited to 'drivers/media/i2c/tda7432.c')
| -rw-r--r-- | drivers/media/i2c/tda7432.c | 427 |
1 files changed, 427 insertions, 0 deletions
diff --git a/drivers/media/i2c/tda7432.c b/drivers/media/i2c/tda7432.c new file mode 100644 index 000000000..cf93021a6 --- /dev/null +++ b/drivers/media/i2c/tda7432.c @@ -0,0 +1,427 @@ +/* + * For the STS-Thompson TDA7432 audio processor chip + * + * Handles audio functions: volume, balance, tone, loudness + * This driver will not complain if used with any + * other i2c device with the same address. + * + * Muting and tone control by Jonathan Isom <jisom@ematic.com> + * + * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com> + * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org> + * This code is placed under the terms of the GNU General Public License + * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) + * Which was based on tda8425.c by Greg Alexander (c) 1998 + * + * OPTIONS: + * debug - set to 1 if you'd like to see debug messages + * set to 2 if you'd like to be inundated with debug messages + * + * loudness - set between 0 and 15 for varying degrees of loudness effect + * + * maxvol - set maximium volume to +20db (1), default is 0db(0) + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/i2c.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include <media/i2c-addr.h> + +#ifndef VIDEO_AUDIO_BALANCE +# define VIDEO_AUDIO_BALANCE 32 +#endif + +MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>"); +MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip"); +MODULE_LICENSE("GPL"); + +static int maxvol; +static int loudness; /* disable loudness by default */ +static int debug; /* insmod parameter */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0)."); +module_param(loudness, int, S_IRUGO); +MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0)."); +module_param(maxvol, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0)."); + + +/* Structure of address and subaddresses for the tda7432 */ + +struct tda7432 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* bass/treble cluster */ + struct v4l2_ctrl *bass; + struct v4l2_ctrl *treble; + }; + struct { + /* mute/balance cluster */ + struct v4l2_ctrl *mute; + struct v4l2_ctrl *balance; + }; +}; + +static inline struct tda7432 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tda7432, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tda7432, hdl)->sd; +} + +/* The TDA7432 is made by STS-Thompson + * http://www.st.com + * http://us.st.com/stonline/books/pdf/docs/4056.pdf + * + * TDA7432: I2C-bus controlled basic audio processor + * + * The TDA7432 controls basic audio functions like volume, balance, + * and tone control (including loudness). It also has four channel + * output (for front and rear). Since most vidcap cards probably + * don't have 4 channel output, this driver will set front & rear + * together (no independent control). + */ + + /* Subaddresses for TDA7432 */ + +#define TDA7432_IN 0x00 /* Input select */ +#define TDA7432_VL 0x01 /* Volume */ +#define TDA7432_TN 0x02 /* Bass, Treble (Tone) */ +#define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */ +#define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */ +#define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */ +#define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */ +#define TDA7432_LD 0x07 /* Loudness */ + + + /* Masks for bits in TDA7432 subaddresses */ + +/* Many of these not used - just for documentation */ + +/* Subaddress 0x00 - Input selection and bass control */ + +/* Bits 0,1,2 control input: + * 0x00 - Stereo input + * 0x02 - Mono input + * 0x03 - Mute (Using Attenuators Plays better with modules) + * Mono probably isn't used - I'm guessing only the stereo + * input is connected on most cards, so we'll set it to stereo. + * + * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut + * Bit 4 controls bass range: 0/1 is extended/standard bass range + * + * Highest 3 bits not used + */ + +#define TDA7432_STEREO_IN 0 +#define TDA7432_MONO_IN 2 /* Probably won't be used */ +#define TDA7432_BASS_SYM 1 << 3 +#define TDA7432_BASS_NORM 1 << 4 + +/* Subaddress 0x01 - Volume */ + +/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps + * Recommended maximum is +20 dB + * + * +32dB: 0x00 + * +20dB: 0x0c + * 0dB: 0x20 + * -79dB: 0x6f + * + * MSB (bit 7) controls loudness: 1/0 is loudness on/off + */ + +#define TDA7432_VOL_0DB 0x20 +#define TDA7432_LD_ON 1 << 7 + + +/* Subaddress 0x02 - Tone control */ + +/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB + * 0x0 is 14dB, 0x7 is 0dB + * + * Bit 3 controls treble attenuation/gain (sign) + * 1 = gain (+) + * 0 = attenuation (-) + * + * Bits 4,5,6 control absolute bass gain from 0dB to 14dB + * (This is only true for normal base range, set in 0x00) + * 0x0 << 4 is 14dB, 0x7 is 0dB + * + * Bit 7 controls bass attenuation/gain (sign) + * 1 << 7 = gain (+) + * 0 << 7 = attenuation (-) + * + * Example: + * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble + */ + +#define TDA7432_TREBLE_0DB 0xf +#define TDA7432_TREBLE 7 +#define TDA7432_TREBLE_GAIN 1 << 3 +#define TDA7432_BASS_0DB 0xf +#define TDA7432_BASS 7 << 4 +#define TDA7432_BASS_GAIN 1 << 7 + + +/* Subaddress 0x03 - Left Front attenuation */ +/* Subaddress 0x04 - Left Rear attenuation */ +/* Subaddress 0x05 - Right Front attenuation */ +/* Subaddress 0x06 - Right Rear attenuation */ + +/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB + * in 1.5dB steps. + * + * 0x00 is 0dB + * 0x1f is -37.5dB + * + * Bit 5 mutes that channel when set (1 = mute, 0 = unmute) + * We'll use the mute on the input, though (above) + * Bits 6,7 unused + */ + +#define TDA7432_ATTEN_0DB 0x00 +#define TDA7432_MUTE 0x1 << 5 + + +/* Subaddress 0x07 - Loudness Control */ + +/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps + * when bit 4 is NOT set + * + * 0x0 is 0dB + * 0xf is -15dB + * + * If bit 4 is set, then there is a flat attenuation according to + * the lower 4 bits, as above. + * + * Bits 5,6,7 unused + */ + + + +/* Begin code */ + +static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned char buffer[2]; + + v4l2_dbg(2, debug, sd, "In tda7432_write\n"); + v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val); + buffer[0] = subaddr; + buffer[1] = val; + if (2 != i2c_master_send(client, buffer, 2)) { + v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n", + subaddr, val); + return -1; + } + return 0; +} + +static int tda7432_set(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned char buf[16]; + + buf[0] = TDA7432_IN; + buf[1] = TDA7432_STEREO_IN | /* Main (stereo) input */ + TDA7432_BASS_SYM | /* Symmetric bass cut */ + TDA7432_BASS_NORM; /* Normal bass range */ + buf[2] = 0x3b; + if (loudness) /* Turn loudness on? */ + buf[2] |= TDA7432_LD_ON; + buf[3] = TDA7432_TREBLE_0DB | (TDA7432_BASS_0DB << 4); + buf[4] = TDA7432_ATTEN_0DB; + buf[5] = TDA7432_ATTEN_0DB; + buf[6] = TDA7432_ATTEN_0DB; + buf[7] = TDA7432_ATTEN_0DB; + buf[8] = loudness; + if (9 != i2c_master_send(client, buf, 9)) { + v4l2_err(sd, "I/O error, trying tda7432_set\n"); + return -1; + } + + return 0; +} + +static int tda7432_log_status(struct v4l2_subdev *sd) +{ + struct tda7432 *state = to_state(sd); + + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +static int tda7432_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct tda7432 *t = to_state(sd); + u8 bass, treble, volume; + u8 lf, lr, rf, rr; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (t->balance->val < 0) { + /* shifted to left, attenuate right */ + rr = rf = -t->balance->val; + lr = lf = TDA7432_ATTEN_0DB; + } else if (t->balance->val > 0) { + /* shifted to right, attenuate left */ + rr = rf = TDA7432_ATTEN_0DB; + lr = lf = t->balance->val; + } else { + /* centered */ + rr = rf = TDA7432_ATTEN_0DB; + lr = lf = TDA7432_ATTEN_0DB; + } + if (t->mute->val) { + lf |= TDA7432_MUTE; + lr |= TDA7432_MUTE; + rf |= TDA7432_MUTE; + rr |= TDA7432_MUTE; + } + /* Mute & update balance*/ + tda7432_write(sd, TDA7432_LF, lf); + tda7432_write(sd, TDA7432_LR, lr); + tda7432_write(sd, TDA7432_RF, rf); + tda7432_write(sd, TDA7432_RR, rr); + return 0; + case V4L2_CID_AUDIO_VOLUME: + volume = 0x6f - ctrl->val; + if (loudness) /* Turn on the loudness bit */ + volume |= TDA7432_LD_ON; + + tda7432_write(sd, TDA7432_VL, volume); + return 0; + case V4L2_CID_AUDIO_BASS: + bass = t->bass->val; + treble = t->treble->val; + if (bass >= 0x8) + bass = 14 - (bass - 8); + if (treble >= 0x8) + treble = 14 - (treble - 8); + + tda7432_write(sd, TDA7432_TN, 0x10 | (bass << 4) | treble); + return 0; + } + return -EINVAL; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops tda7432_ctrl_ops = { + .s_ctrl = tda7432_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tda7432_core_ops = { + .log_status = tda7432_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_ops tda7432_ops = { + .core = &tda7432_core_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* *********************** * + * i2c interface functions * + * *********************** */ + +static int tda7432_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tda7432 *t; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + t = devm_kzalloc(&client->dev, sizeof(*t), GFP_KERNEL); + if (!t) + return -ENOMEM; + sd = &t->sd; + v4l2_i2c_subdev_init(sd, client, &tda7432_ops); + v4l2_ctrl_handler_init(&t->hdl, 5); + v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, maxvol ? 0x68 : 0x4f, 1, maxvol ? 0x5d : 0x47); + t->mute = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + t->balance = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, -31, 31, 1, 0); + t->bass = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_BASS, 0, 14, 1, 7); + t->treble = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, 0, 14, 1, 7); + sd->ctrl_handler = &t->hdl; + if (t->hdl.error) { + int err = t->hdl.error; + + v4l2_ctrl_handler_free(&t->hdl); + return err; + } + v4l2_ctrl_cluster(2, &t->bass); + v4l2_ctrl_cluster(2, &t->mute); + v4l2_ctrl_handler_setup(&t->hdl); + if (loudness < 0 || loudness > 15) { + v4l2_warn(sd, "loudness parameter must be between 0 and 15\n"); + if (loudness < 0) + loudness = 0; + if (loudness > 15) + loudness = 15; + } + + tda7432_set(sd); + return 0; +} + +static int tda7432_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tda7432 *t = to_state(sd); + + tda7432_set(sd); + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&t->hdl); + return 0; +} + +static const struct i2c_device_id tda7432_id[] = { + { "tda7432", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tda7432_id); + +static struct i2c_driver tda7432_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tda7432", + }, + .probe = tda7432_probe, + .remove = tda7432_remove, + .id_table = tda7432_id, +}; + +module_i2c_driver(tda7432_driver); |