summaryrefslogtreecommitdiff
path: root/drivers/media/radio/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/radio/Kconfig')
-rw-r--r--drivers/media/radio/Kconfig501
1 files changed, 501 insertions, 0 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
new file mode 100644
index 000000000..192f36f2f
--- /dev/null
+++ b/drivers/media/radio/Kconfig
@@ -0,0 +1,501 @@
+#
+# Multimedia Video device configuration
+#
+
+menuconfig RADIO_ADAPTERS
+ bool "Radio Adapters"
+ depends on VIDEO_V4L2
+ depends on MEDIA_RADIO_SUPPORT
+ default y
+ ---help---
+ Say Y here to enable selecting AM/FM radio adapters.
+
+if RADIO_ADAPTERS && VIDEO_V4L2
+
+config RADIO_TEA575X
+ tristate
+
+config RADIO_SI470X
+ bool "Silicon Labs Si470x FM Radio Receiver support"
+ depends on VIDEO_V4L2
+
+source "drivers/media/radio/si470x/Kconfig"
+
+config RADIO_SI4713
+ tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
+ depends on VIDEO_V4L2
+
+source "drivers/media/radio/si4713/Kconfig"
+
+config RADIO_SI476X
+ tristate "Silicon Laboratories Si476x I2C FM Radio"
+ depends on I2C && VIDEO_V4L2
+ depends on MFD_SI476X_CORE
+ depends on SND_SOC
+ select SND_SOC_SI476X
+ ---help---
+ Choose Y here if you have this FM radio chip.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux 2 API. Information on
+ this API and pointers to "v4l2" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-si476x.
+
+config USB_MR800
+ tristate "AverMedia MR 800 USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-mr800.
+
+config USB_DSBR
+ tristate "D-Link/GemTek USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+
+config RADIO_MAXIRADIO
+ tristate "Guillemot MAXI Radio FM 2000 radio"
+ depends on VIDEO_V4L2 && PCI
+ select RADIO_TEA575X
+ ---help---
+ Choose Y here if you have this radio card. This card may also be
+ found as Gemtek PCI FM.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-maxiradio.
+
+config RADIO_SHARK
+ tristate "Griffin radioSHARK USB radio receiver"
+ depends on USB
+ select RADIO_TEA575X
+ ---help---
+ Choose Y here if you have this radio receiver.
+
+ There are 2 versions of this device, this driver is for version 1,
+ which is white.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-shark.
+
+config RADIO_SHARK2
+ tristate "Griffin radioSHARK2 USB radio receiver"
+ depends on USB
+ ---help---
+ Choose Y here if you have this radio receiver.
+
+ There are 2 versions of this device, this driver is for version 2,
+ which is black.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-shark2.
+
+config USB_KEENE
+ tristate "Keene FM Transmitter USB support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of FM transmitter
+ to your computer's USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-keene.
+
+config USB_RAREMONO
+ tristate "Thanko's Raremono AM/FM/SW radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
+ It is one of the very few or perhaps the only consumer USB radio device
+ to receive the AM/FM/SW bands.
+
+ Say Y here if you want to connect this type of AM/FM/SW receiver
+ to your computer's USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-raremono.
+
+config USB_MA901
+ tristate "Masterkit MA901 USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers or headphones.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-ma901.
+
+config RADIO_TEA5764
+ tristate "TEA5764 I2C FM radio support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEA5764 FM chip found in
+ EZX phones. This FM chip is present in EZX phones from Motorola,
+ connected to internal pxa I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-tea5764.
+
+config RADIO_TEA5764_XTAL
+ bool "TEA5764 crystal reference"
+ depends on RADIO_TEA5764=y
+ default y
+ help
+ Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
+ here if TEA5764 reference frequency is connected in FREQIN.
+
+config RADIO_SAA7706H
+ tristate "SAA7706H Car Radio DSP"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the SAA7706H Car radio Digital
+ Signal Processor, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called SAA7706H.
+
+config RADIO_TEF6862
+ tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEF6862 Car Radio Enhanced
+ Selectivity Tuner, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called TEF6862.
+
+config RADIO_TIMBERDALE
+ tristate "Enable the Timberdale radio driver"
+ depends on MFD_TIMBERDALE && VIDEO_V4L2
+ depends on I2C # for RADIO_SAA7706H
+ select RADIO_TEF6862
+ select RADIO_SAA7706H
+ ---help---
+ This is a kind of umbrella driver for the Radio Tuner and DSP
+ found behind the Timberdale FPGA on the Russellville board.
+ Enabling this driver will automatically select the DSP and tuner.
+
+config RADIO_WL1273
+ tristate "Texas Instruments WL1273 I2C FM Radio"
+ depends on I2C && VIDEO_V4L2
+ select MFD_CORE
+ select MFD_WL1273_CORE
+ select FW_LOADER
+ ---help---
+ Choose Y here if you have this FM radio chip.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux 2 API. Information on
+ this API and pointers to "v4l2" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-wl1273.
+
+# TI's ST based wl128x FM radio
+source "drivers/media/radio/wl128x/Kconfig"
+
+#
+# ISA drivers configuration
+#
+
+menuconfig V4L_RADIO_ISA_DRIVERS
+ bool "ISA radio devices"
+ depends on ISA
+ default n
+ ---help---
+ Say Y here to enable support for these ISA drivers.
+
+if V4L_RADIO_ISA_DRIVERS
+
+config RADIO_ISA
+ depends on ISA
+ tristate
+
+config RADIO_CADET
+ tristate "ADS Cadet AM/FM Tuner"
+ depends on ISA && VIDEO_V4L2
+ ---help---
+ Choose Y here if you have one of these AM/FM radio cards, and then
+ fill in the port address below.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-cadet.
+
+config RADIO_RTRACK
+ tristate "AIMSlab RadioTrack (aka RadioReveal) support"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address below.
+
+ Note that newer AIMSlab RadioTrack cards have a different chipset
+ and are not supported by this driver. For these cards, use the
+ RadioTrack II driver below.
+
+ If you have a GemTeks combined (PnP) sound- and radio card you must
+ use this driver as a module and setup the card with isapnptools.
+ You must also pass the module a suitable io parameter, 0x248 has
+ been reported to be used by these cards.
+
+ More information is contained in the file
+ <file:Documentation/video4linux/radiotrack.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-aimslab.
+
+config RADIO_RTRACK_PORT
+ hex "RadioTrack i/o port (0x20f or 0x30f)"
+ depends on RADIO_RTRACK=y
+ default "30f"
+ help
+ Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
+ haven't changed the jumper setting on the card.
+
+config RADIO_RTRACK2
+ tristate "AIMSlab RadioTrack II support"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ ---help---
+ Choose Y here if you have this FM radio card, and then fill in the
+ port address below.
+
+ Note: this driver hasn't been tested since a long time due to lack
+ of hardware. If you have this hardware, then please contact the
+ linux-media mailinglist.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-rtrack2.
+
+config RADIO_RTRACK2_PORT
+ hex "RadioTrack II i/o port (0x20c or 0x30c)"
+ depends on RADIO_RTRACK2=y
+ default "30c"
+ help
+ Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
+ haven't changed the jumper setting on the card.
+
+config RADIO_AZTECH
+ tristate "Aztech/Packard Bell Radio"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address below.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-aztech.
+
+config RADIO_AZTECH_PORT
+ hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
+ depends on RADIO_AZTECH=y
+ default "350"
+ help
+ Enter either 0x350 or 0x358 here. The card default is 0x350, if you
+ haven't changed the setting of jumper JP3 on the card. Removing the
+ jumper sets the card to 0x358.
+
+config RADIO_GEMTEK
+ tristate "GemTek Radio card (or compatible) support"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ ---help---
+ Choose Y here if you have this FM radio card, and then fill in the
+ I/O port address and settings below. The following cards either have
+ GemTek Radio tuner or are rebranded GemTek Radio cards:
+
+ - Sound Vision 16 Gold with FM Radio
+ - Typhoon Radio card (some models)
+ - Hama Radio card
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-gemtek.
+
+config RADIO_GEMTEK_PORT
+ hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
+ depends on RADIO_GEMTEK=y
+ default "34c"
+ help
+ Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
+ card default is 0x34c, if you haven't changed the jumper setting
+ on the card.
+
+ On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
+ port is 0x20c, 0x248 or 0x28c.
+
+ If automatic I/O port probing is enabled this port will be used only
+ in case of automatic probing failure, ie. as a fallback.
+
+config RADIO_GEMTEK_PROBE
+ bool "Automatic I/O port probing"
+ depends on RADIO_GEMTEK=y
+ default y
+ help
+ Say Y here to enable automatic probing for GemTek Radio card. The
+ following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
+ 0x28c.
+
+config RADIO_MIROPCM20
+ tristate "miroSOUND PCM20 radio"
+ depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
+ select SND_ISA
+ select SND_MIRO
+ ---help---
+ Choose Y here if you have this FM radio card. You also need to enable
+ the ALSA sound system. This choice automatically selects the ALSA
+ sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
+ is required for the radio-miropcm20.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-miropcm20.
+
+config RADIO_SF16FMI
+ tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
+ depends on ISA && VIDEO_V4L2
+ ---help---
+ Choose Y here if you have one of these FM radio cards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-sf16fmi.
+
+config RADIO_SF16FMR2
+ tristate "SF16-FMR2/SF16-FMD2 Radio"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_TEA575X
+ ---help---
+ Choose Y here if you have one of these FM radio cards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-sf16fmr2.
+
+config RADIO_TERRATEC
+ tristate "TerraTec ActiveRadio ISA Standalone"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ ---help---
+ Choose Y here if you have this FM radio card.
+
+ Note: this driver hasn't been tested since a long time due to lack
+ of hardware. If you have this hardware, then please contact the
+ linux-media mailinglist.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-terratec.
+
+config RADIO_TRUST
+ tristate "Trust FM radio card"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ help
+ This is a driver for the Trust FM radio cards. Say Y if you have
+ such a card and want to use it under Linux.
+
+ Note: this driver hasn't been tested since a long time due to lack
+ of hardware. If you have this hardware, then please contact the
+ linux-media mailinglist.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-trust.
+
+config RADIO_TRUST_PORT
+ hex "Trust i/o port (usually 0x350 or 0x358)"
+ depends on RADIO_TRUST=y
+ default "350"
+ help
+ Enter the I/O port of your Trust FM radio card. If unsure, try the
+ values "0x350" or "0x358".
+
+config RADIO_TYPHOON
+ tristate "Typhoon Radio (a.k.a. EcoRadio)"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address and the frequency used for muting below.
+
+ Note: this driver hasn't been tested since a long time due to lack
+ of hardware. If you have this hardware, then please contact the
+ linux-media mailinglist.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-typhoon.
+
+config RADIO_TYPHOON_PORT
+ hex "Typhoon I/O port (0x316 or 0x336)"
+ depends on RADIO_TYPHOON=y
+ default "316"
+ help
+ Enter the I/O port of your Typhoon or EcoRadio radio card.
+
+config RADIO_TYPHOON_MUTEFREQ
+ int "Typhoon frequency set when muting the device (kHz)"
+ depends on RADIO_TYPHOON=y
+ default "87500"
+ help
+ Enter the frequency used for muting the radio. The device is never
+ completely silent. If the volume is just turned down, you can still
+ hear silent voices and music. For that reason, the frequency of the
+ radio device is set to the frequency you can enter here whenever
+ the device is muted. There should be no local radio station at that
+ frequency.
+
+config RADIO_ZOLTRIX
+ tristate "Zoltrix Radio"
+ depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address below.
+
+ Note: this driver hasn't been tested since a long time due to lack
+ of hardware. If you have this hardware, then please contact the
+ linux-media mailinglist.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-zoltrix.
+
+config RADIO_ZOLTRIX_PORT
+ hex "ZOLTRIX I/O port (0x20c or 0x30c)"
+ depends on RADIO_ZOLTRIX=y
+ default "20c"
+ help
+ Enter the I/O port of your Zoltrix radio card.
+
+endif # V4L_RADIO_ISA_DRIVERS
+
+endif # RADIO_ADAPTERS