summaryrefslogtreecommitdiff
path: root/drivers/media/rc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/rc/Kconfig')
-rw-r--r--drivers/media/rc/Kconfig391
1 files changed, 391 insertions, 0 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
new file mode 100644
index 000000000..ddfab256b
--- /dev/null
+++ b/drivers/media/rc/Kconfig
@@ -0,0 +1,391 @@
+config RC_CORE
+ tristate
+ depends on MEDIA_RC_SUPPORT
+ depends on INPUT
+ default y
+
+source "drivers/media/rc/keymaps/Kconfig"
+
+menuconfig RC_DECODERS
+ bool "Remote controller decoders"
+ depends on RC_CORE
+ default y
+
+if RC_DECODERS
+config LIRC
+ tristate "LIRC interface driver"
+ depends on RC_CORE
+
+ ---help---
+ Enable this option to build the Linux Infrared Remote
+ Control (LIRC) core device interface driver. The LIRC
+ interface passes raw IR to and from userspace, where the
+ LIRC daemon handles protocol decoding for IR reception and
+ encoding for IR transmitting (aka "blasting").
+
+config IR_LIRC_CODEC
+ tristate "Enable IR to LIRC bridge"
+ depends on RC_CORE
+ depends on LIRC
+ default y
+
+ ---help---
+ Enable this option to pass raw IR to and from userspace via
+ the LIRC interface.
+
+
+config IR_NEC_DECODER
+ tristate "Enable IR raw decoder for the NEC protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with NEC protocol, and
+ if the IR is decoded in software
+
+config IR_RC5_DECODER
+ tristate "Enable IR raw decoder for the RC-5 protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with RC-5 protocol, and
+ if the IR is decoded in software
+
+config IR_RC6_DECODER
+ tristate "Enable IR raw decoder for the RC6 protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the RC6 protocol, and you need software decoding support.
+
+config IR_JVC_DECODER
+ tristate "Enable IR raw decoder for the JVC protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the JVC protocol, and you need software decoding support.
+
+config IR_SONY_DECODER
+ tristate "Enable IR raw decoder for the Sony protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the Sony protocol, and you need software decoding support.
+
+config IR_SANYO_DECODER
+ tristate "Enable IR raw decoder for the Sanyo protocol"
+ depends on RC_CORE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
+ and you need software decoding support.
+
+config IR_SHARP_DECODER
+ tristate "Enable IR raw decoder for the Sharp protocol"
+ depends on RC_CORE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the Sharp protocol, and you need software decoding support.
+
+config IR_MCE_KBD_DECODER
+ tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have a Microsoft Remote Keyboard for
+ Windows Media Center Edition, which you would like to use with
+ a raw IR receiver in your system.
+
+config IR_XMP_DECODER
+ tristate "Enable IR raw decoder for the XMP protocol"
+ depends on RC_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with XMP protocol, and
+ if the IR is decoded in software
+endif #RC_DECODERS
+
+menuconfig RC_DEVICES
+ bool "Remote Controller devices"
+ depends on RC_CORE
+
+if RC_DEVICES
+
+config RC_ATI_REMOTE
+ tristate "ATI / X10 based USB RF remote controls"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ help
+ Say Y here if you want to use an X10 based USB remote control.
+ These are RF remotes with USB receivers.
+
+ Such devices include the ATI remote that comes with many of ATI's
+ All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
+ Medion RF remote, and SnapStream FireFly remote.
+
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote.
+
+config IR_ENE
+ tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
+ depends on PNP
+ depends on RC_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transceiver made by ENE.
+
+ You can see if you have it by looking at lspnp output.
+ Output should include ENE0100 ENE0200 or something similar.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ene_ir.
+
+config IR_HIX5HD2
+ tristate "Hisilicon hix5hd2 IR remote control"
+ depends on RC_CORE
+ help
+ Say Y here if you want to use hisilicon hix5hd2 remote control.
+ To compile this driver as a module, choose M here: the module will be
+ called ir-hix5hd2.
+
+ If you're not sure, select N here
+
+config IR_IMON
+ tristate "SoundGraph iMON Receiver and Display"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
+ IR Receiver and/or LCD/VFD/VGA display.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imon.
+
+config IR_MCEUSB
+ tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Windows Media Center Edition
+ eHome Infrared Transceiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mceusb.
+
+config IR_ITE_CIR
+ tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
+ depends on PNP
+ depends on RC_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receivers
+ /transceivers made by ITE Tech Inc. These are found in
+ several ASUS devices, like the ASUS Digimatrix or the ASUS
+ EEEBox 1501U.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ite-cir.
+
+config IR_FINTEK
+ tristate "Fintek Consumer Infrared Transceiver"
+ depends on PNP
+ depends on RC_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transciever made by Fintek. This chip is found on assorted
+ Jetway motherboards (and of course, possibly others).
+
+ To compile this driver as a module, choose M here: the
+ module will be called fintek-cir.
+
+config IR_MESON
+ tristate "Amlogic Meson IR remote receiver"
+ depends on RC_CORE
+ depends on ARCH_MESON || COMPILE_TEST
+ ---help---
+ Say Y if you want to use the IR remote receiver available
+ on Amlogic Meson SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called meson-ir.
+
+config IR_NUVOTON
+ tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
+ depends on PNP
+ depends on RC_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transciever made by Nuvoton (formerly Winbond). This chip is
+ found in the ASRock ION 330HT, as well as assorted Intel
+ DP55-series motherboards (and of course, possibly others).
+
+ To compile this driver as a module, choose M here: the
+ module will be called nuvoton-cir.
+
+config IR_REDRAT3
+ tristate "RedRat3 IR Transceiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select NEW_LEDS
+ select LEDS_CLASS
+ select USB
+ ---help---
+ Say Y here if you want to use a RedRat3 Infrared Transceiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called redrat3.
+
+config IR_STREAMZAP
+ tristate "Streamzap PC Remote IR Receiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Streamzap PC Remote
+ Infrared Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called streamzap.
+
+config IR_WINBOND_CIR
+ tristate "Winbond IR remote control"
+ depends on X86 && PNP
+ depends on RC_CORE
+ select NEW_LEDS
+ select LEDS_CLASS
+ select BITREVERSE
+ ---help---
+ Say Y here if you want to use the IR remote functionality found
+ in some Winbond SuperI/O chips. Currently only the WPCD376I
+ chip is supported (included in some Intel Media series
+ motherboards).
+
+ To compile this driver as a module, choose M here: the module will
+ be called winbond_cir.
+
+config IR_IGORPLUGUSB
+ tristate "IgorPlug-USB IR Receiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use the IgorPlug-USB IR Receiver by
+ Igor Cesko. This device is included on the Fit-PC2.
+
+ Note that this device can only record bursts of 36 IR pulses and
+ spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
+
+ To compile this driver as a module, choose M here: the module will
+ be called igorplugusb.
+
+config IR_IGUANA
+ tristate "IguanaWorks USB IR Transceiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use the IguanaWorks USB IR Transceiver.
+ Both infrared receive and send are supported. If you want to
+ change the ID or the pin config, use the user space driver from
+ IguanaWorks.
+
+ Only firmware 0x0205 and later is supported.
+
+ To compile this driver as a module, choose M here: the module will
+ be called iguanair.
+
+config IR_TTUSBIR
+ tristate "TechnoTrend USB IR Receiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ select NEW_LEDS
+ select LEDS_CLASS
+ ---help---
+ Say Y here if you want to use the TechnoTrend USB IR Receiver. The
+ driver can control the led.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ttusbir.
+
+config IR_RX51
+ tristate "Nokia N900 IR transmitter diode"
+ depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
+ ---help---
+ Say Y or M here if you want to enable support for the IR
+ transmitter diode built in the Nokia N900 (RX51) device.
+
+ The driver uses omap DM timers for generating the carrier
+ wave and pulses.
+
+source "drivers/media/rc/img-ir/Kconfig"
+
+config RC_LOOPBACK
+ tristate "Remote Control Loopback Driver"
+ depends on RC_CORE
+ ---help---
+ Say Y here if you want support for the remote control loopback
+ driver which allows TX data to be sent back as RX data.
+ This is mostly useful for debugging purposes.
+
+ If you're not sure, select N here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called rc_loopback.
+
+config IR_GPIO_CIR
+ tristate "GPIO IR remote control"
+ depends on RC_CORE
+ ---help---
+ Say Y if you want to use GPIO based IR Receiver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-ir-recv.
+
+config RC_ST
+ tristate "ST remote control receiver"
+ depends on RC_CORE
+ depends on ARCH_STI || COMPILE_TEST
+ help
+ Say Y here if you want support for ST remote control driver
+ which allows both IR and UHF RX.
+ The driver passes raw pulse and space information to the LIRC decoder.
+
+ If you're not sure, select N here.
+
+config IR_SUNXI
+ tristate "SUNXI IR remote control"
+ depends on RC_CORE
+ depends on ARCH_SUNXI || COMPILE_TEST
+ ---help---
+ Say Y if you want to use sunXi internal IR Controller
+
+ To compile this driver as a module, choose M here: the module will
+ be called sunxi-ir.
+
+endif #RC_DEVICES