diff options
Diffstat (limited to 'drivers/media/rc/redrat3.c')
| -rw-r--r-- | drivers/media/rc/redrat3.c | 1097 |
1 files changed, 1097 insertions, 0 deletions
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c new file mode 100644 index 000000000..c4def66f9 --- /dev/null +++ b/drivers/media/rc/redrat3.c @@ -0,0 +1,1097 @@ +/* + * USB RedRat3 IR Transceiver rc-core driver + * + * Copyright (c) 2011 by Jarod Wilson <jarod@redhat.com> + * based heavily on the work of Stephen Cox, with additional + * help from RedRat Ltd. + * + * This driver began life based an an old version of the first-generation + * lirc_mceusb driver from the lirc 0.7.2 distribution. It was then + * significantly rewritten by Stephen Cox with the aid of RedRat Ltd's + * Chris Dodge. + * + * The driver was then ported to rc-core and significantly rewritten again, + * by Jarod, using the in-kernel mceusb driver as a guide, after an initial + * port effort was started by Stephen. + * + * TODO LIST: + * - fix lirc not showing repeats properly + * -- + * + * The RedRat3 is a USB transceiver with both send & receive, + * with 2 separate sensors available for receive to enable + * both good long range reception for general use, and good + * short range reception when required for learning a signal. + * + * http://www.redrat.co.uk/ + * + * It uses its own little protocol to communicate, the required + * parts of which are embedded within this driver. + * -- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <asm/unaligned.h> +#include <linux/device.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <media/rc-core.h> + +/* Driver Information */ +#define DRIVER_AUTHOR "Jarod Wilson <jarod@redhat.com>" +#define DRIVER_AUTHOR2 "The Dweller, Stephen Cox" +#define DRIVER_DESC "RedRat3 USB IR Transceiver Driver" +#define DRIVER_NAME "redrat3" + +/* bulk data transfer types */ +#define RR3_ERROR 0x01 +#define RR3_MOD_SIGNAL_IN 0x20 +#define RR3_MOD_SIGNAL_OUT 0x21 + +/* Get the RR firmware version */ +#define RR3_FW_VERSION 0xb1 +#define RR3_FW_VERSION_LEN 64 +/* Send encoded signal bulk-sent earlier*/ +#define RR3_TX_SEND_SIGNAL 0xb3 +#define RR3_SET_IR_PARAM 0xb7 +#define RR3_GET_IR_PARAM 0xb8 +/* Blink the red LED on the device */ +#define RR3_BLINK_LED 0xb9 +/* Read serial number of device */ +#define RR3_READ_SER_NO 0xba +#define RR3_SER_NO_LEN 4 +/* Start capture with the RC receiver */ +#define RR3_RC_DET_ENABLE 0xbb +/* Stop capture with the RC receiver */ +#define RR3_RC_DET_DISABLE 0xbc +/* Return the status of RC detector capture */ +#define RR3_RC_DET_STATUS 0xbd +/* Reset redrat */ +#define RR3_RESET 0xa0 + +/* Max number of lengths in the signal. */ +#define RR3_IR_IO_MAX_LENGTHS 0x01 +/* Periods to measure mod. freq. */ +#define RR3_IR_IO_PERIODS_MF 0x02 +/* Size of memory for main signal data */ +#define RR3_IR_IO_SIG_MEM_SIZE 0x03 +/* Delta value when measuring lengths */ +#define RR3_IR_IO_LENGTH_FUZZ 0x04 +/* Timeout for end of signal detection */ +#define RR3_IR_IO_SIG_TIMEOUT 0x05 +/* Minimum value for pause recognition. */ +#define RR3_IR_IO_MIN_PAUSE 0x06 + +/* Clock freq. of EZ-USB chip */ +#define RR3_CLK 24000000 +/* Clock periods per timer count */ +#define RR3_CLK_PER_COUNT 12 +/* (RR3_CLK / RR3_CLK_PER_COUNT) */ +#define RR3_CLK_CONV_FACTOR 2000000 +/* USB bulk-in IR data endpoint address */ +#define RR3_BULK_IN_EP_ADDR 0x82 + +/* Size of the fixed-length portion of the signal */ +#define RR3_DRIVER_MAXLENS 128 +#define RR3_MAX_SIG_SIZE 512 +#define RR3_TIME_UNIT 50 +#define RR3_END_OF_SIGNAL 0x7f +#define RR3_TX_TRAILER_LEN 2 +#define RR3_RX_MIN_TIMEOUT 5 +#define RR3_RX_MAX_TIMEOUT 2000 + +/* The 8051's CPUCS Register address */ +#define RR3_CPUCS_REG_ADDR 0x7f92 + +#define USB_RR3USB_VENDOR_ID 0x112a +#define USB_RR3USB_PRODUCT_ID 0x0001 +#define USB_RR3IIUSB_PRODUCT_ID 0x0005 + +struct redrat3_header { + __be16 length; + __be16 transfer_type; +} __packed; + +/* sending and receiving irdata */ +struct redrat3_irdata { + struct redrat3_header header; + __be32 pause; + __be16 mod_freq_count; + __be16 num_periods; + __u8 max_lengths; + __u8 no_lengths; + __be16 max_sig_size; + __be16 sig_size; + __u8 no_repeats; + __be16 lens[RR3_DRIVER_MAXLENS]; /* not aligned */ + __u8 sigdata[RR3_MAX_SIG_SIZE]; +} __packed; + +/* firmware errors */ +struct redrat3_error { + struct redrat3_header header; + __be16 fw_error; +} __packed; + +/* table of devices that work with this driver */ +static struct usb_device_id redrat3_dev_table[] = { + /* Original version of the RedRat3 */ + {USB_DEVICE(USB_RR3USB_VENDOR_ID, USB_RR3USB_PRODUCT_ID)}, + /* Second Version/release of the RedRat3 - RetRat3-II */ + {USB_DEVICE(USB_RR3USB_VENDOR_ID, USB_RR3IIUSB_PRODUCT_ID)}, + {} /* Terminating entry */ +}; + +/* Structure to hold all of our device specific stuff */ +struct redrat3_dev { + /* core device bits */ + struct rc_dev *rc; + struct device *dev; + + /* led control */ + struct led_classdev led; + atomic_t flash; + struct usb_ctrlrequest flash_control; + struct urb *flash_urb; + u8 flash_in_buf; + + /* save off the usb device pointer */ + struct usb_device *udev; + + /* the receive endpoint */ + struct usb_endpoint_descriptor *ep_in; + /* the buffer to receive data */ + void *bulk_in_buf; + /* urb used to read ir data */ + struct urb *read_urb; + + /* the send endpoint */ + struct usb_endpoint_descriptor *ep_out; + + /* usb dma */ + dma_addr_t dma_in; + + /* rx signal timeout timer */ + struct timer_list rx_timeout; + u32 hw_timeout; + + /* Is the device currently transmitting?*/ + bool transmitting; + + /* store for current packet */ + struct redrat3_irdata irdata; + u16 bytes_read; + + u32 carrier; + + char name[64]; + char phys[64]; +}; + +/* + * redrat3_issue_async + * + * Issues an async read to the ir data in port.. + * sets the callback to be redrat3_handle_async + */ +static void redrat3_issue_async(struct redrat3_dev *rr3) +{ + int res; + + res = usb_submit_urb(rr3->read_urb, GFP_ATOMIC); + if (res) + dev_dbg(rr3->dev, + "%s: receive request FAILED! (res %d, len %d)\n", + __func__, res, rr3->read_urb->transfer_buffer_length); +} + +static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) +{ + if (!rr3->transmitting && (code != 0x40)) + dev_info(rr3->dev, "fw error code 0x%02x: ", code); + + switch (code) { + case 0x00: + pr_cont("No Error\n"); + break; + + /* Codes 0x20 through 0x2f are IR Firmware Errors */ + case 0x20: + pr_cont("Initial signal pulse not long enough " + "to measure carrier frequency\n"); + break; + case 0x21: + pr_cont("Not enough length values allocated for signal\n"); + break; + case 0x22: + pr_cont("Not enough memory allocated for signal data\n"); + break; + case 0x23: + pr_cont("Too many signal repeats\n"); + break; + case 0x28: + pr_cont("Insufficient memory available for IR signal " + "data memory allocation\n"); + break; + case 0x29: + pr_cont("Insufficient memory available " + "for IrDa signal data memory allocation\n"); + break; + + /* Codes 0x30 through 0x3f are USB Firmware Errors */ + case 0x30: + pr_cont("Insufficient memory available for bulk " + "transfer structure\n"); + break; + + /* + * Other error codes... These are primarily errors that can occur in + * the control messages sent to the redrat + */ + case 0x40: + if (!rr3->transmitting) + pr_cont("Signal capture has been terminated\n"); + break; + case 0x41: + pr_cont("Attempt to set/get and unknown signal I/O " + "algorithm parameter\n"); + break; + case 0x42: + pr_cont("Signal capture already started\n"); + break; + + default: + pr_cont("Unknown Error\n"); + break; + } +} + +static u32 redrat3_val_to_mod_freq(struct redrat3_irdata *irdata) +{ + u32 mod_freq = 0; + u16 mod_freq_count = be16_to_cpu(irdata->mod_freq_count); + + if (mod_freq_count != 0) + mod_freq = (RR3_CLK * be16_to_cpu(irdata->num_periods)) / + (mod_freq_count * RR3_CLK_PER_COUNT); + + return mod_freq; +} + +/* this function scales down the figures for the same result... */ +static u32 redrat3_len_to_us(u32 length) +{ + u32 biglen = length * 1000; + u32 divisor = (RR3_CLK_CONV_FACTOR) / 1000; + u32 result = (u32) (biglen / divisor); + + /* don't allow zero lengths to go back, breaks lirc */ + return result ? result : 1; +} + +/* + * convert us back into redrat3 lengths + * + * length * 1000 length * 1000000 + * ------------- = ---------------- = micro + * rr3clk / 1000 rr3clk + + * 6 * 2 4 * 3 micro * rr3clk micro * rr3clk / 1000 + * ----- = 4 ----- = 6 -------------- = len --------------------- + * 3 2 1000000 1000 + */ +static u32 redrat3_us_to_len(u32 microsec) +{ + u32 result; + u32 divisor; + + microsec &= IR_MAX_DURATION; + divisor = (RR3_CLK_CONV_FACTOR / 1000); + result = (u32)(microsec * divisor) / 1000; + + /* don't allow zero lengths to go back, breaks lirc */ + return result ? result : 1; +} + +/* timer callback to send reset event */ +static void redrat3_rx_timeout(unsigned long data) +{ + struct redrat3_dev *rr3 = (struct redrat3_dev *)data; + + dev_dbg(rr3->dev, "calling ir_raw_event_reset\n"); + ir_raw_event_reset(rr3->rc); +} + +static void redrat3_process_ir_data(struct redrat3_dev *rr3) +{ + DEFINE_IR_RAW_EVENT(rawir); + struct device *dev; + unsigned i, trailer = 0; + unsigned sig_size, single_len, offset, val; + unsigned long delay; + u32 mod_freq; + + if (!rr3) { + pr_err("%s called with no context!\n", __func__); + return; + } + + dev = rr3->dev; + + /* Make sure we reset the IR kfifo after a bit of inactivity */ + delay = usecs_to_jiffies(rr3->hw_timeout); + mod_timer(&rr3->rx_timeout, jiffies + delay); + + mod_freq = redrat3_val_to_mod_freq(&rr3->irdata); + dev_dbg(dev, "Got mod_freq of %u\n", mod_freq); + + /* process each rr3 encoded byte into an int */ + sig_size = be16_to_cpu(rr3->irdata.sig_size); + for (i = 0; i < sig_size; i++) { + offset = rr3->irdata.sigdata[i]; + val = get_unaligned_be16(&rr3->irdata.lens[offset]); + single_len = redrat3_len_to_us(val); + + /* we should always get pulse/space/pulse/space samples */ + if (i % 2) + rawir.pulse = false; + else + rawir.pulse = true; + + rawir.duration = US_TO_NS(single_len); + /* Save initial pulse length to fudge trailer */ + if (i == 0) + trailer = rawir.duration; + /* cap the value to IR_MAX_DURATION */ + rawir.duration &= IR_MAX_DURATION; + + dev_dbg(dev, "storing %s with duration %d (i: %d)\n", + rawir.pulse ? "pulse" : "space", rawir.duration, i); + ir_raw_event_store_with_filter(rr3->rc, &rawir); + } + + /* add a trailing space, if need be */ + if (i % 2) { + rawir.pulse = false; + /* this duration is made up, and may not be ideal... */ + if (trailer < US_TO_NS(1000)) + rawir.duration = US_TO_NS(2800); + else + rawir.duration = trailer; + dev_dbg(dev, "storing trailing space with duration %d\n", + rawir.duration); + ir_raw_event_store_with_filter(rr3->rc, &rawir); + } + + dev_dbg(dev, "calling ir_raw_event_handle\n"); + ir_raw_event_handle(rr3->rc); +} + +/* Util fn to send rr3 cmds */ +static u8 redrat3_send_cmd(int cmd, struct redrat3_dev *rr3) +{ + struct usb_device *udev; + u8 *data; + int res; + + data = kzalloc(sizeof(u8), GFP_KERNEL); + if (!data) + return -ENOMEM; + + udev = rr3->udev; + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x0000, 0x0000, data, sizeof(u8), HZ * 10); + + if (res < 0) { + dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d", + __func__, res, *data); + res = -EIO; + } else + res = data[0]; + + kfree(data); + + return res; +} + +/* Enables the long range detector and starts async receive */ +static int redrat3_enable_detector(struct redrat3_dev *rr3) +{ + struct device *dev = rr3->dev; + u8 ret; + + ret = redrat3_send_cmd(RR3_RC_DET_ENABLE, rr3); + if (ret != 0) + dev_dbg(dev, "%s: unexpected ret of %d\n", + __func__, ret); + + ret = redrat3_send_cmd(RR3_RC_DET_STATUS, rr3); + if (ret != 1) { + dev_err(dev, "%s: detector status: %d, should be 1\n", + __func__, ret); + return -EIO; + } + + redrat3_issue_async(rr3); + + return 0; +} + +static inline void redrat3_delete(struct redrat3_dev *rr3, + struct usb_device *udev) +{ + usb_kill_urb(rr3->read_urb); + usb_kill_urb(rr3->flash_urb); + usb_free_urb(rr3->read_urb); + usb_free_urb(rr3->flash_urb); + usb_free_coherent(udev, le16_to_cpu(rr3->ep_in->wMaxPacketSize), + rr3->bulk_in_buf, rr3->dma_in); + + kfree(rr3); +} + +static u32 redrat3_get_timeout(struct redrat3_dev *rr3) +{ + __be32 *tmp; + u32 timeout = MS_TO_US(150); /* a sane default, if things go haywire */ + int len, ret, pipe; + + len = sizeof(*tmp); + tmp = kzalloc(len, GFP_KERNEL); + if (!tmp) { + dev_warn(rr3->dev, "Memory allocation faillure\n"); + return timeout; + } + + pipe = usb_rcvctrlpipe(rr3->udev, 0); + ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5); + if (ret != len) + dev_warn(rr3->dev, "Failed to read timeout from hardware\n"); + else { + timeout = redrat3_len_to_us(be32_to_cpup(tmp)); + + dev_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000); + } + + kfree(tmp); + + return timeout; +} + +static void redrat3_reset(struct redrat3_dev *rr3) +{ + struct usb_device *udev = rr3->udev; + struct device *dev = rr3->dev; + int rc, rxpipe, txpipe; + u8 *val; + int len = sizeof(u8); + + rxpipe = usb_rcvctrlpipe(udev, 0); + txpipe = usb_sndctrlpipe(udev, 0); + + val = kmalloc(len, GFP_KERNEL); + if (!val) { + dev_err(dev, "Memory allocation failure\n"); + return; + } + + *val = 0x01; + rc = usb_control_msg(udev, rxpipe, RR3_RESET, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25); + dev_dbg(dev, "reset returned 0x%02x\n", rc); + + *val = 5; + rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25); + dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc); + + *val = RR3_DRIVER_MAXLENS; + rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25); + dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc); + + kfree(val); +} + +static void redrat3_get_firmware_rev(struct redrat3_dev *rr3) +{ + int rc = 0; + char *buffer; + + buffer = kzalloc(sizeof(char) * (RR3_FW_VERSION_LEN + 1), GFP_KERNEL); + if (!buffer) { + dev_err(rr3->dev, "Memory allocation failure\n"); + return; + } + + rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0), + RR3_FW_VERSION, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5); + + if (rc >= 0) + dev_info(rr3->dev, "Firmware rev: %s", buffer); + else + dev_err(rr3->dev, "Problem fetching firmware ID\n"); + + kfree(buffer); +} + +static void redrat3_read_packet_start(struct redrat3_dev *rr3, unsigned len) +{ + struct redrat3_header *header = rr3->bulk_in_buf; + unsigned pktlen, pkttype; + + /* grab the Length and type of transfer */ + pktlen = be16_to_cpu(header->length); + pkttype = be16_to_cpu(header->transfer_type); + + if (pktlen > sizeof(rr3->irdata)) { + dev_warn(rr3->dev, "packet length %u too large\n", pktlen); + return; + } + + switch (pkttype) { + case RR3_ERROR: + if (len >= sizeof(struct redrat3_error)) { + struct redrat3_error *error = rr3->bulk_in_buf; + unsigned fw_error = be16_to_cpu(error->fw_error); + redrat3_dump_fw_error(rr3, fw_error); + } + break; + + case RR3_MOD_SIGNAL_IN: + memcpy(&rr3->irdata, rr3->bulk_in_buf, len); + rr3->bytes_read = len; + dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", + rr3->bytes_read, pktlen); + break; + + default: + dev_dbg(rr3->dev, "ignoring packet with type 0x%02x, len of %d, 0x%02x\n", + pkttype, len, pktlen); + break; + } +} + +static void redrat3_read_packet_continue(struct redrat3_dev *rr3, unsigned len) +{ + void *irdata = &rr3->irdata; + + if (len + rr3->bytes_read > sizeof(rr3->irdata)) { + dev_warn(rr3->dev, "too much data for packet\n"); + rr3->bytes_read = 0; + return; + } + + memcpy(irdata + rr3->bytes_read, rr3->bulk_in_buf, len); + + rr3->bytes_read += len; + dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", rr3->bytes_read, + be16_to_cpu(rr3->irdata.header.length)); +} + +/* gather IR data from incoming urb, process it when we have enough */ +static int redrat3_get_ir_data(struct redrat3_dev *rr3, unsigned len) +{ + struct device *dev = rr3->dev; + unsigned pkttype; + int ret = 0; + + if (rr3->bytes_read == 0 && len >= sizeof(struct redrat3_header)) { + redrat3_read_packet_start(rr3, len); + } else if (rr3->bytes_read != 0) { + redrat3_read_packet_continue(rr3, len); + } else if (rr3->bytes_read == 0) { + dev_err(dev, "error: no packet data read\n"); + ret = -ENODATA; + goto out; + } + + if (rr3->bytes_read < be16_to_cpu(rr3->irdata.header.length) + + sizeof(struct redrat3_header)) + /* we're still accumulating data */ + return 0; + + /* if we get here, we've got IR data to decode */ + pkttype = be16_to_cpu(rr3->irdata.header.transfer_type); + if (pkttype == RR3_MOD_SIGNAL_IN) + redrat3_process_ir_data(rr3); + else + dev_dbg(dev, "discarding non-signal data packet (type 0x%02x)\n", + pkttype); + +out: + rr3->bytes_read = 0; + return ret; +} + +/* callback function from USB when async USB request has completed */ +static void redrat3_handle_async(struct urb *urb) +{ + struct redrat3_dev *rr3; + int ret; + + if (!urb) + return; + + rr3 = urb->context; + if (!rr3) { + pr_err("%s called with invalid context!\n", __func__); + usb_unlink_urb(urb); + return; + } + + switch (urb->status) { + case 0: + ret = redrat3_get_ir_data(rr3, urb->actual_length); + if (!ret) { + /* no error, prepare to read more */ + redrat3_issue_async(rr3); + } + break; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + usb_unlink_urb(urb); + return; + + case -EPIPE: + default: + dev_warn(rr3->dev, "Error: urb status = %d\n", urb->status); + rr3->bytes_read = 0; + break; + } +} + +static u16 mod_freq_to_val(unsigned int mod_freq) +{ + int mult = 6000000; + + /* Clk used in mod. freq. generation is CLK24/4. */ + return 65536 - (mult / mod_freq); +} + +static int redrat3_set_tx_carrier(struct rc_dev *rcdev, u32 carrier) +{ + struct redrat3_dev *rr3 = rcdev->priv; + struct device *dev = rr3->dev; + + dev_dbg(dev, "Setting modulation frequency to %u", carrier); + if (carrier == 0) + return -EINVAL; + + rr3->carrier = carrier; + + return carrier; +} + +static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf, + unsigned count) +{ + struct redrat3_dev *rr3 = rcdev->priv; + struct device *dev = rr3->dev; + struct redrat3_irdata *irdata = NULL; + int ret, ret_len; + int lencheck, cur_sample_len, pipe; + int *sample_lens = NULL; + u8 curlencheck = 0; + unsigned i, sendbuf_len; + + if (rr3->transmitting) { + dev_warn(dev, "%s: transmitter already in use\n", __func__); + return -EAGAIN; + } + + if (count > RR3_MAX_SIG_SIZE - RR3_TX_TRAILER_LEN) + return -EINVAL; + + /* rr3 will disable rc detector on transmit */ + rr3->transmitting = true; + + sample_lens = kzalloc(sizeof(int) * RR3_DRIVER_MAXLENS, GFP_KERNEL); + if (!sample_lens) { + ret = -ENOMEM; + goto out; + } + + irdata = kzalloc(sizeof(*irdata), GFP_KERNEL); + if (!irdata) { + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < count; i++) { + cur_sample_len = redrat3_us_to_len(txbuf[i]); + if (cur_sample_len > 0xffff) { + dev_warn(dev, "transmit period of %uus truncated to %uus\n", + txbuf[i], redrat3_len_to_us(0xffff)); + cur_sample_len = 0xffff; + } + for (lencheck = 0; lencheck < curlencheck; lencheck++) { + if (sample_lens[lencheck] == cur_sample_len) + break; + } + if (lencheck == curlencheck) { + dev_dbg(dev, "txbuf[%d]=%u, pos %d, enc %u\n", + i, txbuf[i], curlencheck, cur_sample_len); + if (curlencheck < RR3_DRIVER_MAXLENS) { + /* now convert the value to a proper + * rr3 value.. */ + sample_lens[curlencheck] = cur_sample_len; + put_unaligned_be16(cur_sample_len, + &irdata->lens[curlencheck]); + curlencheck++; + } else { + ret = -EINVAL; + goto out; + } + } + irdata->sigdata[i] = lencheck; + } + + irdata->sigdata[count] = RR3_END_OF_SIGNAL; + irdata->sigdata[count + 1] = RR3_END_OF_SIGNAL; + + sendbuf_len = offsetof(struct redrat3_irdata, + sigdata[count + RR3_TX_TRAILER_LEN]); + /* fill in our packet header */ + irdata->header.length = cpu_to_be16(sendbuf_len - + sizeof(struct redrat3_header)); + irdata->header.transfer_type = cpu_to_be16(RR3_MOD_SIGNAL_OUT); + irdata->pause = cpu_to_be32(redrat3_len_to_us(100)); + irdata->mod_freq_count = cpu_to_be16(mod_freq_to_val(rr3->carrier)); + irdata->no_lengths = curlencheck; + irdata->sig_size = cpu_to_be16(count + RR3_TX_TRAILER_LEN); + + pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress); + ret = usb_bulk_msg(rr3->udev, pipe, irdata, + sendbuf_len, &ret_len, 10 * HZ); + dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret); + + /* now tell the hardware to transmit what we sent it */ + pipe = usb_rcvctrlpipe(rr3->udev, 0); + ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0, 0, irdata, 2, HZ * 10); + + if (ret < 0) + dev_err(dev, "Error: control msg send failed, rc %d\n", ret); + else + ret = count; + +out: + kfree(sample_lens); + kfree(irdata); + + rr3->transmitting = false; + /* rr3 re-enables rc detector because it was enabled before */ + + return ret; +} + +static void redrat3_brightness_set(struct led_classdev *led_dev, enum + led_brightness brightness) +{ + struct redrat3_dev *rr3 = container_of(led_dev, struct redrat3_dev, + led); + + if (brightness != LED_OFF && atomic_cmpxchg(&rr3->flash, 0, 1) == 0) { + int ret = usb_submit_urb(rr3->flash_urb, GFP_ATOMIC); + if (ret != 0) { + dev_dbg(rr3->dev, "%s: unexpected ret of %d\n", + __func__, ret); + atomic_set(&rr3->flash, 0); + } + } +} + +static void redrat3_led_complete(struct urb *urb) +{ + struct redrat3_dev *rr3 = urb->context; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + usb_unlink_urb(urb); + return; + case -EPIPE: + default: + dev_dbg(rr3->dev, "Error: urb status = %d\n", urb->status); + break; + } + + rr3->led.brightness = LED_OFF; + atomic_dec(&rr3->flash); +} + +static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3) +{ + struct device *dev = rr3->dev; + struct rc_dev *rc; + int ret = -ENODEV; + u16 prod = le16_to_cpu(rr3->udev->descriptor.idProduct); + + rc = rc_allocate_device(); + if (!rc) { + dev_err(dev, "remote input dev allocation failed\n"); + goto out; + } + + snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s " + "Infrared Remote Transceiver (%04x:%04x)", + prod == USB_RR3IIUSB_PRODUCT_ID ? "-II" : "", + le16_to_cpu(rr3->udev->descriptor.idVendor), prod); + + usb_make_path(rr3->udev, rr3->phys, sizeof(rr3->phys)); + + rc->input_name = rr3->name; + rc->input_phys = rr3->phys; + usb_to_input_id(rr3->udev, &rc->input_id); + rc->dev.parent = dev; + rc->priv = rr3; + rc->driver_type = RC_DRIVER_IR_RAW; + rc->allowed_protocols = RC_BIT_ALL; + rc->timeout = US_TO_NS(2750); + rc->tx_ir = redrat3_transmit_ir; + rc->s_tx_carrier = redrat3_set_tx_carrier; + rc->driver_name = DRIVER_NAME; + rc->rx_resolution = US_TO_NS(2); + rc->map_name = RC_MAP_HAUPPAUGE; + + ret = rc_register_device(rc); + if (ret < 0) { + dev_err(dev, "remote dev registration failed\n"); + goto out; + } + + return rc; + +out: + rc_free_device(rc); + return NULL; +} + +static int redrat3_dev_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct device *dev = &intf->dev; + struct usb_host_interface *uhi; + struct redrat3_dev *rr3; + struct usb_endpoint_descriptor *ep; + struct usb_endpoint_descriptor *ep_in = NULL; + struct usb_endpoint_descriptor *ep_out = NULL; + u8 addr, attrs; + int pipe, i; + int retval = -ENOMEM; + + uhi = intf->cur_altsetting; + + /* find our bulk-in and bulk-out endpoints */ + for (i = 0; i < uhi->desc.bNumEndpoints; ++i) { + ep = &uhi->endpoint[i].desc; + addr = ep->bEndpointAddress; + attrs = ep->bmAttributes; + + if ((ep_in == NULL) && + ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && + ((attrs & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + dev_dbg(dev, "found bulk-in endpoint at 0x%02x\n", + ep->bEndpointAddress); + /* data comes in on 0x82, 0x81 is for other data... */ + if (ep->bEndpointAddress == RR3_BULK_IN_EP_ADDR) + ep_in = ep; + } + + if ((ep_out == NULL) && + ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && + ((attrs & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + dev_dbg(dev, "found bulk-out endpoint at 0x%02x\n", + ep->bEndpointAddress); + ep_out = ep; + } + } + + if (!ep_in || !ep_out) { + dev_err(dev, "Couldn't find both in and out endpoints\n"); + retval = -ENODEV; + goto no_endpoints; + } + + /* allocate memory for our device state and initialize it */ + rr3 = kzalloc(sizeof(*rr3), GFP_KERNEL); + if (rr3 == NULL) { + dev_err(dev, "Memory allocation failure\n"); + goto no_endpoints; + } + + rr3->dev = &intf->dev; + + /* set up bulk-in endpoint */ + rr3->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rr3->read_urb) { + dev_err(dev, "Read urb allocation failure\n"); + goto error; + } + + rr3->ep_in = ep_in; + rr3->bulk_in_buf = usb_alloc_coherent(udev, + le16_to_cpu(ep_in->wMaxPacketSize), GFP_KERNEL, &rr3->dma_in); + if (!rr3->bulk_in_buf) { + dev_err(dev, "Read buffer allocation failure\n"); + goto error; + } + + pipe = usb_rcvbulkpipe(udev, ep_in->bEndpointAddress); + usb_fill_bulk_urb(rr3->read_urb, udev, pipe, rr3->bulk_in_buf, + le16_to_cpu(ep_in->wMaxPacketSize), redrat3_handle_async, rr3); + rr3->read_urb->transfer_dma = rr3->dma_in; + rr3->read_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + rr3->ep_out = ep_out; + rr3->udev = udev; + + redrat3_reset(rr3); + redrat3_get_firmware_rev(rr3); + + /* might be all we need to do? */ + retval = redrat3_enable_detector(rr3); + if (retval < 0) + goto error; + + /* store current hardware timeout, in us, will use for kfifo resets */ + rr3->hw_timeout = redrat3_get_timeout(rr3); + + /* default.. will get overridden by any sends with a freq defined */ + rr3->carrier = 38000; + + /* led control */ + rr3->led.name = "redrat3:red:feedback"; + rr3->led.default_trigger = "rc-feedback"; + rr3->led.brightness_set = redrat3_brightness_set; + retval = led_classdev_register(&intf->dev, &rr3->led); + if (retval) + goto error; + + atomic_set(&rr3->flash, 0); + rr3->flash_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rr3->flash_urb) { + retval = -ENOMEM; + goto led_free_error; + } + + /* setup packet is 'c0 b9 0000 0000 0001' */ + rr3->flash_control.bRequestType = 0xc0; + rr3->flash_control.bRequest = RR3_BLINK_LED; + rr3->flash_control.wLength = cpu_to_le16(1); + + usb_fill_control_urb(rr3->flash_urb, udev, usb_rcvctrlpipe(udev, 0), + (unsigned char *)&rr3->flash_control, + &rr3->flash_in_buf, sizeof(rr3->flash_in_buf), + redrat3_led_complete, rr3); + + rr3->rc = redrat3_init_rc_dev(rr3); + if (!rr3->rc) { + retval = -ENOMEM; + goto led_free_error; + } + setup_timer(&rr3->rx_timeout, redrat3_rx_timeout, (unsigned long)rr3); + + /* we can register the device now, as it is ready */ + usb_set_intfdata(intf, rr3); + + return 0; + +led_free_error: + led_classdev_unregister(&rr3->led); +error: + redrat3_delete(rr3, rr3->udev); + +no_endpoints: + dev_err(dev, "%s: retval = %x", __func__, retval); + + return retval; +} + +static void redrat3_dev_disconnect(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct redrat3_dev *rr3 = usb_get_intfdata(intf); + + if (!rr3) + return; + + usb_set_intfdata(intf, NULL); + rc_unregister_device(rr3->rc); + led_classdev_unregister(&rr3->led); + del_timer_sync(&rr3->rx_timeout); + redrat3_delete(rr3, udev); +} + +static int redrat3_dev_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct redrat3_dev *rr3 = usb_get_intfdata(intf); + + led_classdev_suspend(&rr3->led); + usb_kill_urb(rr3->read_urb); + usb_kill_urb(rr3->flash_urb); + return 0; +} + +static int redrat3_dev_resume(struct usb_interface *intf) +{ + struct redrat3_dev *rr3 = usb_get_intfdata(intf); + + if (usb_submit_urb(rr3->read_urb, GFP_ATOMIC)) + return -EIO; + led_classdev_resume(&rr3->led); + return 0; +} + +static struct usb_driver redrat3_dev_driver = { + .name = DRIVER_NAME, + .probe = redrat3_dev_probe, + .disconnect = redrat3_dev_disconnect, + .suspend = redrat3_dev_suspend, + .resume = redrat3_dev_resume, + .reset_resume = redrat3_dev_resume, + .id_table = redrat3_dev_table +}; + +module_usb_driver(redrat3_dev_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_AUTHOR(DRIVER_AUTHOR2); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, redrat3_dev_table); |