diff options
Diffstat (limited to 'drivers/media/tuners/fc0012.c')
| -rw-r--r-- | drivers/media/tuners/fc0012.c | 518 |
1 files changed, 518 insertions, 0 deletions
diff --git a/drivers/media/tuners/fc0012.c b/drivers/media/tuners/fc0012.c new file mode 100644 index 000000000..d74e92056 --- /dev/null +++ b/drivers/media/tuners/fc0012.c @@ -0,0 +1,518 @@ +/* + * Fitipower FC0012 tuner driver + * + * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "fc0012.h" +#include "fc0012-priv.h" + +static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val) +{ + u8 buf[2] = {reg, val}; + struct i2c_msg msg = { + .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2 + }; + + if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + dev_err(&priv->i2c->dev, + "%s: I2C write reg failed, reg: %02x, val: %02x\n", + KBUILD_MODNAME, reg, val); + return -EREMOTEIO; + } + return 0; +} + +static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val) +{ + struct i2c_msg msg[2] = { + { .addr = priv->cfg->i2c_address, .flags = 0, + .buf = ®, .len = 1 }, + { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, + .buf = val, .len = 1 }, + }; + + if (i2c_transfer(priv->i2c, msg, 2) != 2) { + dev_err(&priv->i2c->dev, + "%s: I2C read reg failed, reg: %02x\n", + KBUILD_MODNAME, reg); + return -EREMOTEIO; + } + return 0; +} + +static int fc0012_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int fc0012_init(struct dvb_frontend *fe) +{ + struct fc0012_priv *priv = fe->tuner_priv; + int i, ret = 0; + unsigned char reg[] = { + 0x00, /* dummy reg. 0 */ + 0x05, /* reg. 0x01 */ + 0x10, /* reg. 0x02 */ + 0x00, /* reg. 0x03 */ + 0x00, /* reg. 0x04 */ + 0x0f, /* reg. 0x05: may also be 0x0a */ + 0x00, /* reg. 0x06: divider 2, VCO slow */ + 0x00, /* reg. 0x07: may also be 0x0f */ + 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256, + Loop Bw 1/8 */ + 0x6e, /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */ + 0xb8, /* reg. 0x0a: Disable LO Test Buffer */ + 0x82, /* reg. 0x0b: Output Clock is same as clock frequency, + may also be 0x83 */ + 0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */ + 0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */ + 0x00, /* reg. 0x0e */ + 0x00, /* reg. 0x0f */ + 0x00, /* reg. 0x10: may also be 0x0d */ + 0x00, /* reg. 0x11 */ + 0x1f, /* reg. 0x12: Set to maximum gain */ + 0x08, /* reg. 0x13: Set to Middle Gain: 0x08, + Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */ + 0x00, /* reg. 0x14 */ + 0x04, /* reg. 0x15: Enable LNA COMPS */ + }; + + switch (priv->cfg->xtal_freq) { + case FC_XTAL_27_MHZ: + case FC_XTAL_28_8_MHZ: + reg[0x07] |= 0x20; + break; + case FC_XTAL_36_MHZ: + default: + break; + } + + if (priv->cfg->dual_master) + reg[0x0c] |= 0x02; + + if (priv->cfg->loop_through) + reg[0x09] |= 0x01; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ + + for (i = 1; i < sizeof(reg); i++) { + ret = fc0012_writereg(priv, i, reg[i]); + if (ret) + break; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ + + if (ret) + dev_err(&priv->i2c->dev, "%s: fc0012_writereg failed: %d\n", + KBUILD_MODNAME, ret); + + return ret; +} + +static int fc0012_set_params(struct dvb_frontend *fe) +{ + struct fc0012_priv *priv = fe->tuner_priv; + int i, ret = 0; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + u32 freq = p->frequency / 1000; + u32 delsys = p->delivery_system; + unsigned char reg[7], am, pm, multi, tmp; + unsigned long f_vco; + unsigned short xtal_freq_khz_2, xin, xdiv; + bool vco_select = false; + + if (fe->callback) { + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1)); + if (ret) + goto exit; + } + + switch (priv->cfg->xtal_freq) { + case FC_XTAL_27_MHZ: + xtal_freq_khz_2 = 27000 / 2; + break; + case FC_XTAL_36_MHZ: + xtal_freq_khz_2 = 36000 / 2; + break; + case FC_XTAL_28_8_MHZ: + default: + xtal_freq_khz_2 = 28800 / 2; + break; + } + + /* select frequency divider and the frequency of VCO */ + if (freq < 37084) { /* freq * 96 < 3560000 */ + multi = 96; + reg[5] = 0x82; + reg[6] = 0x00; + } else if (freq < 55625) { /* freq * 64 < 3560000 */ + multi = 64; + reg[5] = 0x82; + reg[6] = 0x02; + } else if (freq < 74167) { /* freq * 48 < 3560000 */ + multi = 48; + reg[5] = 0x42; + reg[6] = 0x00; + } else if (freq < 111250) { /* freq * 32 < 3560000 */ + multi = 32; + reg[5] = 0x42; + reg[6] = 0x02; + } else if (freq < 148334) { /* freq * 24 < 3560000 */ + multi = 24; + reg[5] = 0x22; + reg[6] = 0x00; + } else if (freq < 222500) { /* freq * 16 < 3560000 */ + multi = 16; + reg[5] = 0x22; + reg[6] = 0x02; + } else if (freq < 296667) { /* freq * 12 < 3560000 */ + multi = 12; + reg[5] = 0x12; + reg[6] = 0x00; + } else if (freq < 445000) { /* freq * 8 < 3560000 */ + multi = 8; + reg[5] = 0x12; + reg[6] = 0x02; + } else if (freq < 593334) { /* freq * 6 < 3560000 */ + multi = 6; + reg[5] = 0x0a; + reg[6] = 0x00; + } else { + multi = 4; + reg[5] = 0x0a; + reg[6] = 0x02; + } + + f_vco = freq * multi; + + if (f_vco >= 3060000) { + reg[6] |= 0x08; + vco_select = true; + } + + if (freq >= 45000) { + /* From divided value (XDIV) determined the FA and FP value */ + xdiv = (unsigned short)(f_vco / xtal_freq_khz_2); + if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2)) + xdiv++; + + pm = (unsigned char)(xdiv / 8); + am = (unsigned char)(xdiv - (8 * pm)); + + if (am < 2) { + reg[1] = am + 8; + reg[2] = pm - 1; + } else { + reg[1] = am; + reg[2] = pm; + } + } else { + /* fix for frequency less than 45 MHz */ + reg[1] = 0x06; + reg[2] = 0x11; + } + + /* fix clock out */ + reg[6] |= 0x20; + + /* From VCO frequency determines the XIN ( fractional part of Delta + Sigma PLL) and divided value (XDIV) */ + xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2); + xin = (xin << 15) / xtal_freq_khz_2; + if (xin >= 16384) + xin += 32768; + + reg[3] = xin >> 8; /* xin with 9 bit resolution */ + reg[4] = xin & 0xff; + + if (delsys == SYS_DVBT) { + reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */ + switch (p->bandwidth_hz) { + case 6000000: + reg[6] |= 0x80; + break; + case 7000000: + reg[6] |= 0x40; + break; + case 8000000: + default: + break; + } + } else { + dev_err(&priv->i2c->dev, "%s: modulation type not supported!\n", + KBUILD_MODNAME); + return -EINVAL; + } + + /* modified for Realtek demod */ + reg[5] |= 0x07; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ + + for (i = 1; i <= 6; i++) { + ret = fc0012_writereg(priv, i, reg[i]); + if (ret) + goto exit; + } + + /* VCO Calibration */ + ret = fc0012_writereg(priv, 0x0e, 0x80); + if (!ret) + ret = fc0012_writereg(priv, 0x0e, 0x00); + + /* VCO Re-Calibration if needed */ + if (!ret) + ret = fc0012_writereg(priv, 0x0e, 0x00); + + if (!ret) { + msleep(10); + ret = fc0012_readreg(priv, 0x0e, &tmp); + } + if (ret) + goto exit; + + /* vco selection */ + tmp &= 0x3f; + + if (vco_select) { + if (tmp > 0x3c) { + reg[6] &= ~0x08; + ret = fc0012_writereg(priv, 0x06, reg[6]); + if (!ret) + ret = fc0012_writereg(priv, 0x0e, 0x80); + if (!ret) + ret = fc0012_writereg(priv, 0x0e, 0x00); + } + } else { + if (tmp < 0x02) { + reg[6] |= 0x08; + ret = fc0012_writereg(priv, 0x06, reg[6]); + if (!ret) + ret = fc0012_writereg(priv, 0x0e, 0x80); + if (!ret) + ret = fc0012_writereg(priv, 0x0e, 0x00); + } + } + + priv->frequency = p->frequency; + priv->bandwidth = p->bandwidth_hz; + +exit: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ + if (ret) + dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n", + KBUILD_MODNAME, __func__, ret); + return ret; +} + +static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct fc0012_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + *frequency = 0; /* Zero-IF */ + return 0; +} + +static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct fc0012_priv *priv = fe->tuner_priv; + *bandwidth = priv->bandwidth; + return 0; +} + +#define INPUT_ADC_LEVEL -8 + +static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct fc0012_priv *priv = fe->tuner_priv; + int ret; + unsigned char tmp; + int int_temp, lna_gain, int_lna, tot_agc_gain, power; + const int fc0012_lna_gain_table[] = { + /* low gain */ + -63, -58, -99, -73, + -63, -65, -54, -60, + /* middle gain */ + 71, 70, 68, 67, + 65, 63, 61, 58, + /* high gain */ + 197, 191, 188, 186, + 184, 182, 181, 179, + }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ + + ret = fc0012_writereg(priv, 0x12, 0x00); + if (ret) + goto err; + + ret = fc0012_readreg(priv, 0x12, &tmp); + if (ret) + goto err; + int_temp = tmp; + + ret = fc0012_readreg(priv, 0x13, &tmp); + if (ret) + goto err; + lna_gain = tmp & 0x1f; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ + + if (lna_gain < ARRAY_SIZE(fc0012_lna_gain_table)) { + int_lna = fc0012_lna_gain_table[lna_gain]; + tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 + + (int_temp & 0x1f)) * 2; + power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10; + + if (power >= 45) + *strength = 255; /* 100% */ + else if (power < -95) + *strength = 0; + else + *strength = (power + 95) * 255 / 140; + + *strength |= *strength << 8; + } else { + ret = -1; + } + + goto exit; + +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ +exit: + if (ret) + dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n", + KBUILD_MODNAME, __func__, ret); + return ret; +} + +static const struct dvb_tuner_ops fc0012_tuner_ops = { + .info = { + .name = "Fitipower FC0012", + + .frequency_min = 37000000, /* estimate */ + .frequency_max = 862000000, /* estimate */ + .frequency_step = 0, + }, + + .release = fc0012_release, + + .init = fc0012_init, + + .set_params = fc0012_set_params, + + .get_frequency = fc0012_get_frequency, + .get_if_frequency = fc0012_get_if_frequency, + .get_bandwidth = fc0012_get_bandwidth, + + .get_rf_strength = fc0012_get_rf_strength, +}; + +struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct fc0012_config *cfg) +{ + struct fc0012_priv *priv; + int ret; + u8 chip_id; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); + goto err; + } + + priv->cfg = cfg; + priv->i2c = i2c; + + /* check if the tuner is there */ + ret = fc0012_readreg(priv, 0x00, &chip_id); + if (ret < 0) + goto err; + + dev_dbg(&i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id); + + switch (chip_id) { + case 0xa1: + break; + default: + ret = -ENODEV; + goto err; + } + + dev_info(&i2c->dev, "%s: Fitipower FC0012 successfully identified\n", + KBUILD_MODNAME); + + if (priv->cfg->loop_through) { + ret = fc0012_writereg(priv, 0x09, 0x6f); + if (ret < 0) + goto err; + } + + /* + * TODO: Clock out en or div? + * For dual tuner configuration clearing bit [0] is required. + */ + if (priv->cfg->clock_out) { + ret = fc0012_writereg(priv, 0x0b, 0x82); + if (ret < 0) + goto err; + } + + fe->tuner_priv = priv; + memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops, + sizeof(struct dvb_tuner_ops)); + +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret) { + dev_dbg(&i2c->dev, "%s: failed: %d\n", __func__, ret); + kfree(priv); + return NULL; + } + + return fe; +} +EXPORT_SYMBOL(fc0012_attach); + +MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver"); +MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.6"); |