summaryrefslogtreecommitdiff
path: root/drivers/memstick/host/r592.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/memstick/host/r592.h')
-rw-r--r--drivers/memstick/host/r592.h175
1 files changed, 175 insertions, 0 deletions
diff --git a/drivers/memstick/host/r592.h b/drivers/memstick/host/r592.h
new file mode 100644
index 000000000..c5726c1e8
--- /dev/null
+++ b/drivers/memstick/host/r592.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2010 - Maxim Levitsky
+ * driver for Ricoh memstick readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef R592_H
+
+#include <linux/memstick.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/kfifo.h>
+#include <linux/ctype.h>
+
+/* write to this reg (number,len) triggers TPC execution */
+#define R592_TPC_EXEC 0x00
+#define R592_TPC_EXEC_LEN_SHIFT 16 /* Bits 16..25 are TPC len */
+#define R592_TPC_EXEC_BIG_FIFO (1 << 26) /* If bit 26 is set, large fifo is used (reg 48) */
+#define R592_TPC_EXEC_TPC_SHIFT 28 /* Bits 28..31 are the TPC number */
+
+
+/* Window for small TPC fifo (big endian)*/
+/* reads and writes always are done in 8 byte chunks */
+/* Not used in driver, because large fifo does better job */
+#define R592_SFIFO 0x08
+
+
+/* Status register (ms int, small fifo, IO)*/
+#define R592_STATUS 0x10
+ /* Parallel INT bits */
+#define R592_STATUS_P_CMDNACK (1 << 16) /* INT reg: NACK (parallel mode) */
+#define R592_STATUS_P_BREQ (1 << 17) /* INT reg: card ready (parallel mode)*/
+#define R592_STATUS_P_INTERR (1 << 18) /* INT reg: int error (parallel mode)*/
+#define R592_STATUS_P_CED (1 << 19) /* INT reg: command done (parallel mode) */
+
+ /* Fifo status */
+#define R592_STATUS_SFIFO_FULL (1 << 20) /* Small Fifo almost full (last chunk is written) */
+#define R592_STATUS_SFIFO_EMPTY (1 << 21) /* Small Fifo empty */
+
+ /* Error detection via CRC */
+#define R592_STATUS_SEND_ERR (1 << 24) /* Send failed */
+#define R592_STATUS_RECV_ERR (1 << 25) /* Receive failed */
+
+ /* Card state */
+#define R592_STATUS_RDY (1 << 28) /* RDY signal received */
+#define R592_STATUS_CED (1 << 29) /* INT: Command done (serial mode)*/
+#define R592_STATUS_SFIFO_INPUT (1 << 30) /* Small fifo received data*/
+
+#define R592_SFIFO_SIZE 32 /* total size of small fifo is 32 bytes */
+#define R592_SFIFO_PACKET 8 /* packet size of small fifo */
+
+/* IO control */
+#define R592_IO 0x18
+#define R592_IO_16 (1 << 16) /* Set by default, can be cleared */
+#define R592_IO_18 (1 << 18) /* Set by default, can be cleared */
+#define R592_IO_SERIAL1 (1 << 20) /* Set by default, can be cleared, (cleared on parallel) */
+#define R592_IO_22 (1 << 22) /* Set by default, can be cleared */
+#define R592_IO_DIRECTION (1 << 24) /* TPC direction (1 write 0 read) */
+#define R592_IO_26 (1 << 26) /* Set by default, can be cleared */
+#define R592_IO_SERIAL2 (1 << 30) /* Set by default, can be cleared (cleared on parallel), serial doesn't work if unset */
+#define R592_IO_RESET (1 << 31) /* Reset, sets defaults*/
+
+
+/* Turns hardware on/off */
+#define R592_POWER 0x20 /* bits 0-7 writeable */
+#define R592_POWER_0 (1 << 0) /* set on start, cleared on stop - must be set*/
+#define R592_POWER_1 (1 << 1) /* set on start, cleared on stop - must be set*/
+#define R592_POWER_3 (1 << 3) /* must be clear */
+#define R592_POWER_20 (1 << 5) /* set before switch to parallel */
+
+/* IO mode*/
+#define R592_IO_MODE 0x24
+#define R592_IO_MODE_SERIAL 1
+#define R592_IO_MODE_PARALLEL 3
+
+
+/* IRQ,card detection,large fifo (first word irq status, second enable) */
+/* IRQs are ACKed by clearing the bits */
+#define R592_REG_MSC 0x28
+#define R592_REG_MSC_PRSNT (1 << 1) /* card present (only status)*/
+#define R592_REG_MSC_IRQ_INSERT (1 << 8) /* detect insert / card insered */
+#define R592_REG_MSC_IRQ_REMOVE (1 << 9) /* detect removal / card removed */
+#define R592_REG_MSC_FIFO_EMPTY (1 << 10) /* fifo is empty */
+#define R592_REG_MSC_FIFO_DMA_DONE (1 << 11) /* dma enable / dma done */
+
+#define R592_REG_MSC_FIFO_USER_ORN (1 << 12) /* set if software reads empty fifo (if R592_REG_MSC_FIFO_EMPTY is set) */
+#define R592_REG_MSC_FIFO_MISMATH (1 << 13) /* set if amount of data in fifo doesn't match amount in TPC */
+#define R592_REG_MSC_FIFO_DMA_ERR (1 << 14) /* IO failure */
+#define R592_REG_MSC_LED (1 << 15) /* clear to turn led off (only status)*/
+
+#define DMA_IRQ_ACK_MASK \
+ (R592_REG_MSC_FIFO_DMA_DONE | R592_REG_MSC_FIFO_DMA_ERR)
+
+#define DMA_IRQ_EN_MASK (DMA_IRQ_ACK_MASK << 16)
+
+#define IRQ_ALL_ACK_MASK 0x00007F00
+#define IRQ_ALL_EN_MASK (IRQ_ALL_ACK_MASK << 16)
+
+/* DMA address for large FIFO read/writes*/
+#define R592_FIFO_DMA 0x2C
+
+/* PIO access to large FIFO (512 bytes) (big endian)*/
+#define R592_FIFO_PIO 0x30
+#define R592_LFIFO_SIZE 512 /* large fifo size */
+
+
+/* large FIFO DMA settings */
+#define R592_FIFO_DMA_SETTINGS 0x34
+#define R592_FIFO_DMA_SETTINGS_EN (1 << 0) /* DMA enabled */
+#define R592_FIFO_DMA_SETTINGS_DIR (1 << 1) /* Dma direction (1 read, 0 write) */
+#define R592_FIFO_DMA_SETTINGS_CAP (1 << 24) /* Dma is aviable */
+
+/* Maybe just an delay */
+/* Bits 17..19 are just number */
+/* bit 16 is set, then bit 20 is waited */
+/* time to wait is about 50 spins * 2 ^ (bits 17..19) */
+/* seems to be possible just to ignore */
+/* Probably debug register */
+#define R592_REG38 0x38
+#define R592_REG38_CHANGE (1 << 16) /* Start bit */
+#define R592_REG38_DONE (1 << 20) /* HW set this after the delay */
+#define R592_REG38_SHIFT 17
+
+/* Debug register, written (0xABCDEF00) when error happens - not used*/
+#define R592_REG_3C 0x3C
+
+struct r592_device {
+ struct pci_dev *pci_dev;
+ struct memstick_host *host; /* host backpointer */
+ struct memstick_request *req; /* current request */
+
+ /* Registers, IRQ */
+ void __iomem *mmio;
+ int irq;
+ spinlock_t irq_lock;
+ spinlock_t io_thread_lock;
+ struct timer_list detect_timer;
+
+ struct task_struct *io_thread;
+ bool parallel_mode;
+
+ DECLARE_KFIFO(pio_fifo, u8, sizeof(u32));
+
+ /* DMA area */
+ int dma_capable;
+ int dma_error;
+ struct completion dma_done;
+ void *dummy_dma_page;
+ dma_addr_t dummy_dma_page_physical_address;
+
+};
+
+#define DRV_NAME "r592"
+
+
+#define message(format, ...) \
+ printk(KERN_INFO DRV_NAME ": " format "\n", ## __VA_ARGS__)
+
+#define __dbg(level, format, ...) \
+ do { \
+ if (debug >= level) \
+ printk(KERN_DEBUG DRV_NAME \
+ ": " format "\n", ## __VA_ARGS__); \
+ } while (0)
+
+
+#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
+#define dbg_reg(format, ...) __dbg(3, format, ## __VA_ARGS__)
+
+#endif