summaryrefslogtreecommitdiff
path: root/drivers/message/fusion/mptbase.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r--drivers/message/fusion/mptbase.c8560
1 files changed, 8560 insertions, 0 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
new file mode 100644
index 000000000..187f83629
--- /dev/null
+++ b/drivers/message/fusion/mptbase.c
@@ -0,0 +1,8560 @@
+/*
+ * linux/drivers/message/fusion/mptbase.c
+ * This is the Fusion MPT base driver which supports multiple
+ * (SCSI + LAN) specialized protocol drivers.
+ * For use with LSI PCI chip/adapter(s)
+ * running LSI Fusion MPT (Message Passing Technology) firmware.
+ *
+ * Copyright (c) 1999-2008 LSI Corporation
+ * (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ NO WARRANTY
+ THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ solely responsible for determining the appropriateness of using and
+ distributing the Program and assumes all risks associated with its
+ exercise of rights under this Agreement, including but not limited to
+ the risks and costs of program errors, damage to or loss of data,
+ programs or equipment, and unavailability or interruption of operations.
+
+ DISCLAIMER OF LIABILITY
+ NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h> /* needed for in_interrupt() proto */
+#include <linux/dma-mapping.h>
+#include <asm/io.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+#include <linux/kthread.h>
+#include <scsi/scsi_host.h>
+
+#include "mptbase.h"
+#include "lsi/mpi_log_fc.h"
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#define my_NAME "Fusion MPT base driver"
+#define my_VERSION MPT_LINUX_VERSION_COMMON
+#define MYNAM "mptbase"
+
+MODULE_AUTHOR(MODULEAUTHOR);
+MODULE_DESCRIPTION(my_NAME);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
+
+/*
+ * cmd line parameters
+ */
+
+static int mpt_msi_enable_spi;
+module_param(mpt_msi_enable_spi, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_spi,
+ " Enable MSI Support for SPI controllers (default=0)");
+
+static int mpt_msi_enable_fc;
+module_param(mpt_msi_enable_fc, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_fc,
+ " Enable MSI Support for FC controllers (default=0)");
+
+static int mpt_msi_enable_sas;
+module_param(mpt_msi_enable_sas, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_sas,
+ " Enable MSI Support for SAS controllers (default=0)");
+
+static int mpt_channel_mapping;
+module_param(mpt_channel_mapping, int, 0);
+MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
+
+static int mpt_debug_level;
+static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
+module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
+ &mpt_debug_level, 0600);
+MODULE_PARM_DESC(mpt_debug_level,
+ " debug level - refer to mptdebug.h - (default=0)");
+
+int mpt_fwfault_debug;
+EXPORT_SYMBOL(mpt_fwfault_debug);
+module_param(mpt_fwfault_debug, int, 0600);
+MODULE_PARM_DESC(mpt_fwfault_debug,
+ "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
+
+static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
+ [MPT_MAX_CALLBACKNAME_LEN+1];
+
+#ifdef MFCNT
+static int mfcounter = 0;
+#define PRINT_MF_COUNT 20000
+#endif
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Public data...
+ */
+
+#define WHOINIT_UNKNOWN 0xAA
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Private data...
+ */
+ /* Adapter link list */
+LIST_HEAD(ioc_list);
+ /* Callback lookup table */
+static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
+ /* Protocol driver class lookup table */
+static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
+ /* Event handler lookup table */
+static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
+ /* Reset handler lookup table */
+static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
+static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
+
+#ifdef CONFIG_PROC_FS
+static struct proc_dir_entry *mpt_proc_root_dir;
+#endif
+
+/*
+ * Driver Callback Index's
+ */
+static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
+static u8 last_drv_idx;
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Forward protos...
+ */
+static irqreturn_t mpt_interrupt(int irq, void *bus_id);
+static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+ MPT_FRAME_HDR *reply);
+static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
+ u32 *req, int replyBytes, u16 *u16reply, int maxwait,
+ int sleepFlag);
+static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
+static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
+static void mpt_adapter_disable(MPT_ADAPTER *ioc);
+static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
+
+static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
+static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
+static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
+static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
+static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
+static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
+static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
+static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
+static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
+static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
+static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
+static int PrimeIocFifos(MPT_ADAPTER *ioc);
+static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
+static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
+static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
+static int GetLanConfigPages(MPT_ADAPTER *ioc);
+static int GetIoUnitPage2(MPT_ADAPTER *ioc);
+int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
+static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
+static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
+static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
+static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
+static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
+static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
+ int sleepFlag);
+static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
+static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
+static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
+
+#ifdef CONFIG_PROC_FS
+static const struct file_operations mpt_summary_proc_fops;
+static const struct file_operations mpt_version_proc_fops;
+static const struct file_operations mpt_iocinfo_proc_fops;
+#endif
+static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
+
+static int ProcessEventNotification(MPT_ADAPTER *ioc,
+ EventNotificationReply_t *evReply, int *evHandlers);
+static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
+static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
+static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
+
+/* module entry point */
+static int __init fusion_init (void);
+static void __exit fusion_exit (void);
+
+#define CHIPREG_READ32(addr) readl_relaxed(addr)
+#define CHIPREG_READ32_dmasync(addr) readl(addr)
+#define CHIPREG_WRITE32(addr,val) writel(val, addr)
+#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
+#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
+
+static void
+pci_disable_io_access(struct pci_dev *pdev)
+{
+ u16 command_reg;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
+ command_reg &= ~1;
+ pci_write_config_word(pdev, PCI_COMMAND, command_reg);
+}
+
+static void
+pci_enable_io_access(struct pci_dev *pdev)
+{
+ u16 command_reg;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
+ command_reg |= 1;
+ pci_write_config_word(pdev, PCI_COMMAND, command_reg);
+}
+
+static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
+{
+ int ret = param_set_int(val, kp);
+ MPT_ADAPTER *ioc;
+
+ if (ret)
+ return ret;
+
+ list_for_each_entry(ioc, &ioc_list, list)
+ ioc->debug_level = mpt_debug_level;
+ return 0;
+}
+
+/**
+ * mpt_get_cb_idx - obtain cb_idx for registered driver
+ * @dclass: class driver enum
+ *
+ * Returns cb_idx, or zero means it wasn't found
+ **/
+static u8
+mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
+{
+ u8 cb_idx;
+
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
+ if (MptDriverClass[cb_idx] == dclass)
+ return cb_idx;
+ return 0;
+}
+
+/**
+ * mpt_is_discovery_complete - determine if discovery has completed
+ * @ioc: per adatper instance
+ *
+ * Returns 1 when discovery completed, else zero.
+ */
+static int
+mpt_is_discovery_complete(MPT_ADAPTER *ioc)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasIOUnitPage0_t *buffer;
+ dma_addr_t dma_handle;
+ int rc = 0;
+
+ memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
+ memset(&cfg, 0, sizeof(CONFIGPARMS));
+ hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if ((mpt_config(ioc, &cfg)))
+ goto out;
+ if (!hdr.ExtPageLength)
+ goto out;
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer)
+ goto out;
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((mpt_config(ioc, &cfg)))
+ goto out_free_consistent;
+
+ if (!(buffer->PhyData[0].PortFlags &
+ MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
+ rc = 1;
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return rc;
+}
+
+
+/**
+ * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return 0 if controller is removed from pci subsystem.
+ * Return -1 for other case.
+ */
+static int mpt_remove_dead_ioc_func(void *arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+ struct pci_dev *pdev;
+
+ if ((ioc == NULL))
+ return -1;
+
+ pdev = ioc->pcidev;
+ if ((pdev == NULL))
+ return -1;
+
+ pci_stop_and_remove_bus_device_locked(pdev);
+ return 0;
+}
+
+
+
+/**
+ * mpt_fault_reset_work - work performed on workq after ioc fault
+ * @work: input argument, used to derive ioc
+ *
+**/
+static void
+mpt_fault_reset_work(struct work_struct *work)
+{
+ MPT_ADAPTER *ioc =
+ container_of(work, MPT_ADAPTER, fault_reset_work.work);
+ u32 ioc_raw_state;
+ int rc;
+ unsigned long flags;
+ MPT_SCSI_HOST *hd;
+ struct task_struct *p;
+
+ if (ioc->ioc_reset_in_progress || !ioc->active)
+ goto out;
+
+
+ ioc_raw_state = mpt_GetIocState(ioc, 0);
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
+ printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
+ ioc->name, __func__);
+
+ /*
+ * Call mptscsih_flush_pending_cmds callback so that we
+ * flush all pending commands back to OS.
+ * This call is required to aovid deadlock at block layer.
+ * Dead IOC will fail to do diag reset,and this call is safe
+ * since dead ioc will never return any command back from HW.
+ */
+ hd = shost_priv(ioc->sh);
+ ioc->schedule_dead_ioc_flush_running_cmds(hd);
+
+ /*Remove the Dead Host */
+ p = kthread_run(mpt_remove_dead_ioc_func, ioc,
+ "mpt_dead_ioc_%d", ioc->id);
+ if (IS_ERR(p)) {
+ printk(MYIOC_s_ERR_FMT
+ "%s: Running mpt_dead_ioc thread failed !\n",
+ ioc->name, __func__);
+ } else {
+ printk(MYIOC_s_WARN_FMT
+ "%s: Running mpt_dead_ioc thread success !\n",
+ ioc->name, __func__);
+ }
+ return; /* don't rearm timer */
+ }
+
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK)
+ == MPI_IOC_STATE_FAULT) {
+ printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
+ ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+ printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
+ ioc->name, __func__);
+ rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
+ printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
+ __func__, (rc == 0) ? "success" : "failed");
+ ioc_raw_state = mpt_GetIocState(ioc, 0);
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
+ printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
+ "reset (%04xh)\n", ioc->name, ioc_raw_state &
+ MPI_DOORBELL_DATA_MASK);
+ } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
+ if ((mpt_is_discovery_complete(ioc))) {
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
+ "discovery_quiesce_io flag\n", ioc->name));
+ ioc->sas_discovery_quiesce_io = 0;
+ }
+ }
+
+ out:
+ /*
+ * Take turns polling alternate controller
+ */
+ if (ioc->alt_ioc)
+ ioc = ioc->alt_ioc;
+
+ /* rearm the timer */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->reset_work_q)
+ queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
+ msecs_to_jiffies(MPT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+}
+
+
+/*
+ * Process turbo (context) reply...
+ */
+static void
+mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+ MPT_FRAME_HDR *mf = NULL;
+ MPT_FRAME_HDR *mr = NULL;
+ u16 req_idx = 0;
+ u8 cb_idx;
+
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
+ ioc->name, pa));
+
+ switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
+ case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
+ req_idx = pa & 0x0000FFFF;
+ cb_idx = (pa & 0x00FF0000) >> 16;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ break;
+ case MPI_CONTEXT_REPLY_TYPE_LAN:
+ cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
+ /*
+ * Blind set of mf to NULL here was fatal
+ * after lan_reply says "freeme"
+ * Fix sort of combined with an optimization here;
+ * added explicit check for case where lan_reply
+ * was just returning 1 and doing nothing else.
+ * For this case skip the callback, but set up
+ * proper mf value first here:-)
+ */
+ if ((pa & 0x58000000) == 0x58000000) {
+ req_idx = pa & 0x0000FFFF;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ mpt_free_msg_frame(ioc, mf);
+ mb();
+ return;
+ break;
+ }
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ break;
+ case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
+ cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ break;
+ default:
+ cb_idx = 0;
+ BUG();
+ }
+
+ /* Check for (valid) IO callback! */
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+ MptCallbacks[cb_idx] == NULL) {
+ printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+ __func__, ioc->name, cb_idx);
+ goto out;
+ }
+
+ if (MptCallbacks[cb_idx](ioc, mf, mr))
+ mpt_free_msg_frame(ioc, mf);
+ out:
+ mb();
+}
+
+static void
+mpt_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+ MPT_FRAME_HDR *mf;
+ MPT_FRAME_HDR *mr;
+ u16 req_idx;
+ u8 cb_idx;
+ int freeme;
+
+ u32 reply_dma_low;
+ u16 ioc_stat;
+
+ /* non-TURBO reply! Hmmm, something may be up...
+ * Newest turbo reply mechanism; get address
+ * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
+ */
+
+ /* Map DMA address of reply header to cpu address.
+ * pa is 32 bits - but the dma address may be 32 or 64 bits
+ * get offset based only only the low addresses
+ */
+
+ reply_dma_low = (pa <<= 1);
+ mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
+ (reply_dma_low - ioc->reply_frames_low_dma));
+
+ req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
+ cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
+ ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
+ DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
+
+ /* Check/log IOC log info
+ */
+ ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
+ if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+ u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
+ if (ioc->bus_type == FC)
+ mpt_fc_log_info(ioc, log_info);
+ else if (ioc->bus_type == SPI)
+ mpt_spi_log_info(ioc, log_info);
+ else if (ioc->bus_type == SAS)
+ mpt_sas_log_info(ioc, log_info, cb_idx);
+ }
+
+ if (ioc_stat & MPI_IOCSTATUS_MASK)
+ mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
+
+ /* Check for (valid) IO callback! */
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+ MptCallbacks[cb_idx] == NULL) {
+ printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+ __func__, ioc->name, cb_idx);
+ freeme = 0;
+ goto out;
+ }
+
+ freeme = MptCallbacks[cb_idx](ioc, mf, mr);
+
+ out:
+ /* Flush (non-TURBO) reply with a WRITE! */
+ CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
+
+ if (freeme)
+ mpt_free_msg_frame(ioc, mf);
+ mb();
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
+ * @irq: irq number (not used)
+ * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
+ *
+ * This routine is registered via the request_irq() kernel API call,
+ * and handles all interrupts generated from a specific MPT adapter
+ * (also referred to as a IO Controller or IOC).
+ * This routine must clear the interrupt from the adapter and does
+ * so by reading the reply FIFO. Multiple replies may be processed
+ * per single call to this routine.
+ *
+ * This routine handles register-level access of the adapter but
+ * dispatches (calls) a protocol-specific callback routine to handle
+ * the protocol-specific details of the MPT request completion.
+ */
+static irqreturn_t
+mpt_interrupt(int irq, void *bus_id)
+{
+ MPT_ADAPTER *ioc = bus_id;
+ u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+
+ if (pa == 0xFFFFFFFF)
+ return IRQ_NONE;
+
+ /*
+ * Drain the reply FIFO!
+ */
+ do {
+ if (pa & MPI_ADDRESS_REPLY_A_BIT)
+ mpt_reply(ioc, pa);
+ else
+ mpt_turbo_reply(ioc, pa);
+ pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+ } while (pa != 0xFFFFFFFF);
+
+ return IRQ_HANDLED;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mptbase_reply - MPT base driver's callback routine
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @req: Pointer to original MPT request frame
+ * @reply: Pointer to MPT reply frame (NULL if TurboReply)
+ *
+ * MPT base driver's callback routine; all base driver
+ * "internal" request/reply processing is routed here.
+ * Currently used for EventNotification and EventAck handling.
+ *
+ * Returns 1 indicating original alloc'd request frame ptr
+ * should be freed, or 0 if it shouldn't.
+ */
+static int
+mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
+{
+ EventNotificationReply_t *pEventReply;
+ u8 event;
+ int evHandlers;
+ int freereq = 1;
+
+ switch (reply->u.hdr.Function) {
+ case MPI_FUNCTION_EVENT_NOTIFICATION:
+ pEventReply = (EventNotificationReply_t *)reply;
+ evHandlers = 0;
+ ProcessEventNotification(ioc, pEventReply, &evHandlers);
+ event = le32_to_cpu(pEventReply->Event) & 0xFF;
+ if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
+ freereq = 0;
+ if (event != MPI_EVENT_EVENT_CHANGE)
+ break;
+ case MPI_FUNCTION_CONFIG:
+ case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
+ ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+ ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->mptbase_cmds.reply, reply,
+ min(MPT_DEFAULT_FRAME_SIZE,
+ 4 * reply->u.reply.MsgLength));
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->mptbase_cmds.done);
+ } else
+ freereq = 0;
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
+ freereq = 1;
+ break;
+ case MPI_FUNCTION_EVENT_ACK:
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "EventAck reply received\n", ioc->name));
+ break;
+ default:
+ printk(MYIOC_s_ERR_FMT
+ "Unexpected msg function (=%02Xh) reply received!\n",
+ ioc->name, reply->u.hdr.Function);
+ break;
+ }
+
+ /*
+ * Conditionally tell caller to free the original
+ * EventNotification/EventAck/unexpected request frame!
+ */
+ return freereq;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_register - Register protocol-specific main callback handler.
+ * @cbfunc: callback function pointer
+ * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
+ * @func_name: call function's name
+ *
+ * This routine is called by a protocol-specific driver (SCSI host,
+ * LAN, SCSI target) to register its reply callback routine. Each
+ * protocol-specific driver must do this before it will be able to
+ * use any IOC resources, such as obtaining request frames.
+ *
+ * NOTES: The SCSI protocol driver currently calls this routine thrice
+ * in order to register separate callbacks; one for "normal" SCSI IO;
+ * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
+ *
+ * Returns u8 valued "handle" in the range (and S.O.D. order)
+ * {N,...,7,6,5,...,1} if successful.
+ * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
+ * considered an error by the caller.
+ */
+u8
+mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
+{
+ u8 cb_idx;
+ last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
+
+ /*
+ * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
+ * (slot/handle 0 is reserved!)
+ */
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptCallbacks[cb_idx] == NULL) {
+ MptCallbacks[cb_idx] = cbfunc;
+ MptDriverClass[cb_idx] = dclass;
+ MptEvHandlers[cb_idx] = NULL;
+ last_drv_idx = cb_idx;
+ strlcpy(MptCallbacksName[cb_idx], func_name,
+ MPT_MAX_CALLBACKNAME_LEN+1);
+ break;
+ }
+ }
+
+ return last_drv_idx;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_deregister - Deregister a protocol drivers resources.
+ * @cb_idx: previously registered callback handle
+ *
+ * Each protocol-specific driver should call this routine when its
+ * module is unloaded.
+ */
+void
+mpt_deregister(u8 cb_idx)
+{
+ if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
+ MptCallbacks[cb_idx] = NULL;
+ MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
+ MptEvHandlers[cb_idx] = NULL;
+
+ last_drv_idx++;
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_event_register - Register protocol-specific event callback handler.
+ * @cb_idx: previously registered (via mpt_register) callback handle
+ * @ev_cbfunc: callback function
+ *
+ * This routine can be called by one or more protocol-specific drivers
+ * if/when they choose to be notified of MPT events.
+ *
+ * Returns 0 for success.
+ */
+int
+mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
+{
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return -1;
+
+ MptEvHandlers[cb_idx] = ev_cbfunc;
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_event_deregister - Deregister protocol-specific event callback handler
+ * @cb_idx: previously registered callback handle
+ *
+ * Each protocol-specific driver should call this routine
+ * when it does not (or can no longer) handle events,
+ * or when its module is unloaded.
+ */
+void
+mpt_event_deregister(u8 cb_idx)
+{
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return;
+
+ MptEvHandlers[cb_idx] = NULL;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_reset_register - Register protocol-specific IOC reset handler.
+ * @cb_idx: previously registered (via mpt_register) callback handle
+ * @reset_func: reset function
+ *
+ * This routine can be called by one or more protocol-specific drivers
+ * if/when they choose to be notified of IOC resets.
+ *
+ * Returns 0 for success.
+ */
+int
+mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
+{
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return -1;
+
+ MptResetHandlers[cb_idx] = reset_func;
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
+ * @cb_idx: previously registered callback handle
+ *
+ * Each protocol-specific driver should call this routine
+ * when it does not (or can no longer) handle IOC reset handling,
+ * or when its module is unloaded.
+ */
+void
+mpt_reset_deregister(u8 cb_idx)
+{
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return;
+
+ MptResetHandlers[cb_idx] = NULL;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_device_driver_register - Register device driver hooks
+ * @dd_cbfunc: driver callbacks struct
+ * @cb_idx: MPT protocol driver index
+ */
+int
+mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
+{
+ MPT_ADAPTER *ioc;
+ const struct pci_device_id *id;
+
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return -EINVAL;
+
+ MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
+
+ /* call per pci device probe entry point */
+ list_for_each_entry(ioc, &ioc_list, list) {
+ id = ioc->pcidev->driver ?
+ ioc->pcidev->driver->id_table : NULL;
+ if (dd_cbfunc->probe)
+ dd_cbfunc->probe(ioc->pcidev, id);
+ }
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_device_driver_deregister - DeRegister device driver hooks
+ * @cb_idx: MPT protocol driver index
+ */
+void
+mpt_device_driver_deregister(u8 cb_idx)
+{
+ struct mpt_pci_driver *dd_cbfunc;
+ MPT_ADAPTER *ioc;
+
+ if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return;
+
+ dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
+
+ list_for_each_entry(ioc, &ioc_list, list) {
+ if (dd_cbfunc->remove)
+ dd_cbfunc->remove(ioc->pcidev);
+ }
+
+ MptDeviceDriverHandlers[cb_idx] = NULL;
+}
+
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_get_msg_frame - Obtain an MPT request frame from the pool
+ * @cb_idx: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ *
+ * Obtain an MPT request frame from the pool (of 1024) that are
+ * allocated per MPT adapter.
+ *
+ * Returns pointer to a MPT request frame or %NULL if none are available
+ * or IOC is not active.
+ */
+MPT_FRAME_HDR*
+mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
+{
+ MPT_FRAME_HDR *mf;
+ unsigned long flags;
+ u16 req_idx; /* Request index */
+
+ /* validate handle and ioc identifier */
+
+#ifdef MFCNT
+ if (!ioc->active)
+ printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
+ "returning NULL!\n", ioc->name);
+#endif
+
+ /* If interrupts are not attached, do not return a request frame */
+ if (!ioc->active)
+ return NULL;
+
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ if (!list_empty(&ioc->FreeQ)) {
+ int req_offset;
+
+ mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
+ u.frame.linkage.list);
+ list_del(&mf->u.frame.linkage.list);
+ mf->u.frame.linkage.arg1 = 0;
+ mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
+ req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
+ /* u16! */
+ req_idx = req_offset / ioc->req_sz;
+ mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
+ mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
+ /* Default, will be changed if necessary in SG generation */
+ ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
+#ifdef MFCNT
+ ioc->mfcnt++;
+#endif
+ }
+ else
+ mf = NULL;
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+#ifdef MFCNT
+ if (mf == NULL)
+ printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
+ "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
+ ioc->req_depth);
+ mfcounter++;
+ if (mfcounter == PRINT_MF_COUNT)
+ printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
+ ioc->mfcnt, ioc->req_depth);
+#endif
+
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
+ ioc->name, cb_idx, ioc->id, mf));
+ return mf;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
+ * @cb_idx: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ * @mf: Pointer to MPT request frame
+ *
+ * This routine posts an MPT request frame to the request post FIFO of a
+ * specific MPT adapter.
+ */
+void
+mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
+{
+ u32 mf_dma_addr;
+ int req_offset;
+ u16 req_idx; /* Request index */
+
+ /* ensure values are reset properly! */
+ mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
+ req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
+ /* u16! */
+ req_idx = req_offset / ioc->req_sz;
+ mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
+ mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
+
+ DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
+
+ mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
+ "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
+ ioc->RequestNB[req_idx]));
+ CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
+}
+
+/**
+ * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
+ * @cb_idx: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ * @mf: Pointer to MPT request frame
+ *
+ * Send a protocol-specific MPT request frame to an IOC using
+ * hi-priority request queue.
+ *
+ * This routine posts an MPT request frame to the request post FIFO of a
+ * specific MPT adapter.
+ **/
+void
+mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
+{
+ u32 mf_dma_addr;
+ int req_offset;
+ u16 req_idx; /* Request index */
+
+ /* ensure values are reset properly! */
+ mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
+ req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
+ req_idx = req_offset / ioc->req_sz;
+ mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
+ mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
+
+ DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
+
+ mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
+ ioc->name, mf_dma_addr, req_idx));
+ CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
+ * @ioc: Pointer to MPT adapter structure
+ * @mf: Pointer to MPT request frame
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ */
+void
+mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
+{
+ unsigned long flags;
+
+ /* Put Request back on FreeQ! */
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
+ goto out;
+ /* signature to know if this mf is freed */
+ mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
+ list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
+#ifdef MFCNT
+ ioc->mfcnt--;
+#endif
+ out:
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @flagslength: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ */
+static void
+mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+ SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
+ pSge->FlagsLength = cpu_to_le32(flagslength);
+ pSge->Address = cpu_to_le32(dma_addr);
+}
+
+/**
+ * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @flagslength: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ **/
+static void
+mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+ SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+ pSge->Address.Low = cpu_to_le32
+ (lower_32_bits(dma_addr));
+ pSge->Address.High = cpu_to_le32
+ (upper_32_bits(dma_addr));
+ pSge->FlagsLength = cpu_to_le32
+ ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/**
+ * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
+ * @pAddr: virtual address for SGE
+ * @flagslength: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ **/
+static void
+mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+ SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+ u32 tmp;
+
+ pSge->Address.Low = cpu_to_le32
+ (lower_32_bits(dma_addr));
+ tmp = (u32)(upper_32_bits(dma_addr));
+
+ /*
+ * 1078 errata workaround for the 36GB limitation
+ */
+ if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
+ flagslength |=
+ MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
+ tmp |= (1<<31);
+ if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
+ printk(KERN_DEBUG "1078 P0M2 addressing for "
+ "addr = 0x%llx len = %d\n",
+ (unsigned long long)dma_addr,
+ MPI_SGE_LENGTH(flagslength));
+ }
+
+ pSge->Address.High = cpu_to_le32(tmp);
+ pSge->FlagsLength = cpu_to_le32(
+ (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @next: nextChainOffset value (u32's)
+ * @length: length of next SGL segment
+ * @dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+ SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
+ pChain->Length = cpu_to_le16(length);
+ pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
+ pChain->NextChainOffset = next;
+ pChain->Address = cpu_to_le32(dma_addr);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @next: nextChainOffset value (u32's)
+ * @length: length of next SGL segment
+ * @dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+ SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
+ u32 tmp = dma_addr & 0xFFFFFFFF;
+
+ pChain->Length = cpu_to_le16(length);
+ pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI_SGE_FLAGS_64_BIT_ADDRESSING);
+
+ pChain->NextChainOffset = next;
+
+ pChain->Address.Low = cpu_to_le32(tmp);
+ tmp = (u32)(upper_32_bits(dma_addr));
+ pChain->Address.High = cpu_to_le32(tmp);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
+ * @cb_idx: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ * @reqBytes: Size of the request in bytes
+ * @req: Pointer to MPT request frame
+ * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
+ *
+ * This routine is used exclusively to send MptScsiTaskMgmt
+ * requests since they are required to be sent via doorbell handshake.
+ *
+ * NOTE: It is the callers responsibility to byte-swap fields in the
+ * request which are greater than 1 byte in size.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
+{
+ int r = 0;
+ u8 *req_as_bytes;
+ int ii;
+
+ /* State is known to be good upon entering
+ * this function so issue the bus reset
+ * request.
+ */
+
+ /*
+ * Emulate what mpt_put_msg_frame() does /wrt to sanity
+ * setting cb_idx/req_idx. But ONLY if this request
+ * is in proper (pre-alloc'd) request buffer range...
+ */
+ ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
+ if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
+ MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
+ mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
+ mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
+ }
+
+ /* Make sure there are no doorbells */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ CHIPREG_WRITE32(&ioc->chip->Doorbell,
+ ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
+ ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
+
+ /* Wait for IOC doorbell int */
+ if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
+ return ii;
+ }
+
+ /* Read doorbell and check for active bit */
+ if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
+ return -5;
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
+ ioc->name, ii));
+
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+ return -2;
+ }
+
+ /* Send request via doorbell handshake */
+ req_as_bytes = (u8 *) req;
+ for (ii = 0; ii < reqBytes/4; ii++) {
+ u32 word;
+
+ word = ((req_as_bytes[(ii*4) + 0] << 0) |
+ (req_as_bytes[(ii*4) + 1] << 8) |
+ (req_as_bytes[(ii*4) + 2] << 16) |
+ (req_as_bytes[(ii*4) + 3] << 24));
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+ r = -3;
+ break;
+ }
+ }
+
+ if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
+ r = 0;
+ else
+ r = -4;
+
+ /* Make sure there are no doorbells */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_host_page_access_control - control the IOC's Host Page Buffer access
+ * @ioc: Pointer to MPT adapter structure
+ * @access_control_value: define bits below
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Provides mechanism for the host driver to control the IOC's
+ * Host Page Buffer access.
+ *
+ * Access Control Value - bits[15:12]
+ * 0h Reserved
+ * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
+ * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
+ * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+
+static int
+mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
+{
+ int r = 0;
+
+ /* return if in use */
+ if (CHIPREG_READ32(&ioc->chip->Doorbell)
+ & MPI_DOORBELL_ACTIVE)
+ return -1;
+
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ CHIPREG_WRITE32(&ioc->chip->Doorbell,
+ ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
+ <<MPI_DOORBELL_FUNCTION_SHIFT) |
+ (access_control_value<<12)));
+
+ /* Wait for IOC to clear Doorbell Status bit */
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+ return -2;
+ }else
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_host_page_alloc - allocate system memory for the fw
+ * @ioc: Pointer to pointer to IOC adapter
+ * @ioc_init: Pointer to ioc init config page
+ *
+ * If we already allocated memory in past, then resend the same pointer.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
+{
+ char *psge;
+ int flags_length;
+ u32 host_page_buffer_sz=0;
+
+ if(!ioc->HostPageBuffer) {
+
+ host_page_buffer_sz =
+ le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
+
+ if(!host_page_buffer_sz)
+ return 0; /* fw doesn't need any host buffers */
+
+ /* spin till we get enough memory */
+ while(host_page_buffer_sz > 0) {
+
+ if((ioc->HostPageBuffer = pci_alloc_consistent(
+ ioc->pcidev,
+ host_page_buffer_sz,
+ &ioc->HostPageBuffer_dma)) != NULL) {
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
+ ioc->name, ioc->HostPageBuffer,
+ (u32)ioc->HostPageBuffer_dma,
+ host_page_buffer_sz));
+ ioc->alloc_total += host_page_buffer_sz;
+ ioc->HostPageBuffer_sz = host_page_buffer_sz;
+ break;
+ }
+
+ host_page_buffer_sz -= (4*1024);
+ }
+ }
+
+ if(!ioc->HostPageBuffer) {
+ printk(MYIOC_s_ERR_FMT
+ "Failed to alloc memory for host_page_buffer!\n",
+ ioc->name);
+ return -999;
+ }
+
+ psge = (char *)&ioc_init->HostPageBufferSGE;
+ flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+ MPI_SGE_FLAGS_HOST_TO_IOC |
+ MPI_SGE_FLAGS_END_OF_BUFFER;
+ flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
+ flags_length |= ioc->HostPageBuffer_sz;
+ ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+ ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
+
+return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
+ * @iocid: IOC unique identifier (integer)
+ * @iocpp: Pointer to pointer to IOC adapter
+ *
+ * Given a unique IOC identifier, set pointer to the associated MPT
+ * adapter structure.
+ *
+ * Returns iocid and sets iocpp if iocid is found.
+ * Returns -1 if iocid is not found.
+ */
+int
+mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
+{
+ MPT_ADAPTER *ioc;
+
+ list_for_each_entry(ioc,&ioc_list,list) {
+ if (ioc->id == iocid) {
+ *iocpp =ioc;
+ return iocid;
+ }
+ }
+
+ *iocpp = NULL;
+ return -1;
+}
+
+/**
+ * mpt_get_product_name - returns product string
+ * @vendor: pci vendor id
+ * @device: pci device id
+ * @revision: pci revision id
+ *
+ * Returns product string displayed when driver loads,
+ * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
+ *
+ **/
+static const char*
+mpt_get_product_name(u16 vendor, u16 device, u8 revision)
+{
+ char *product_str = NULL;
+
+ if (vendor == PCI_VENDOR_ID_BROCADE) {
+ switch (device)
+ {
+ case MPI_MANUFACTPAGE_DEVICEID_FC949E:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "BRE040 A0";
+ break;
+ case 0x01:
+ product_str = "BRE040 A1";
+ break;
+ default:
+ product_str = "BRE040";
+ break;
+ }
+ break;
+ }
+ goto out;
+ }
+
+ switch (device)
+ {
+ case MPI_MANUFACTPAGE_DEVICEID_FC909:
+ product_str = "LSIFC909 B1";
+ break;
+ case MPI_MANUFACTPAGE_DEVICEID_FC919:
+ product_str = "LSIFC919 B0";
+ break;
+ case MPI_MANUFACTPAGE_DEVICEID_FC929:
+ product_str = "LSIFC929 B0";
+ break;
+ case MPI_MANUFACTPAGE_DEVICEID_FC919X:
+ if (revision < 0x80)
+ product_str = "LSIFC919X A0";
+ else
+ product_str = "LSIFC919XL A1";
+ break;
+ case MPI_MANUFACTPAGE_DEVICEID_FC929X:
+ if (revision < 0x80)
+ product_str = "LSIFC929X A0";
+ else
+ product_str = "LSIFC929XL A1";
+ break;
+ case MPI_MANUFACTPAGE_DEVICEID_FC939X:
+ product_str = "LSIFC939X A1";
+ break;
+ case MPI_MANUFACTPAGE_DEVICEID_FC949X:
+ product_str = "LSIFC949X A1";
+ break;
+ case MPI_MANUFACTPAGE_DEVICEID_FC949E:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "LSIFC949E A0";
+ break;
+ case 0x01:
+ product_str = "LSIFC949E A1";
+ break;
+ default:
+ product_str = "LSIFC949E";
+ break;
+ }
+ break;
+ case MPI_MANUFACTPAGE_DEVID_53C1030:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "LSI53C1030 A0";
+ break;
+ case 0x01:
+ product_str = "LSI53C1030 B0";
+ break;
+ case 0x03:
+ product_str = "LSI53C1030 B1";
+ break;
+ case 0x07:
+ product_str = "LSI53C1030 B2";
+ break;
+ case 0x08:
+ product_str = "LSI53C1030 C0";
+ break;
+ case 0x80:
+ product_str = "LSI53C1030T A0";
+ break;
+ case 0x83:
+ product_str = "LSI53C1030T A2";
+ break;
+ case 0x87:
+ product_str = "LSI53C1030T A3";
+ break;
+ case 0xc1:
+ product_str = "LSI53C1020A A1";
+ break;
+ default:
+ product_str = "LSI53C1030";
+ break;
+ }
+ break;
+ case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
+ switch (revision)
+ {
+ case 0x03:
+ product_str = "LSI53C1035 A2";
+ break;
+ case 0x04:
+ product_str = "LSI53C1035 B0";
+ break;
+ default:
+ product_str = "LSI53C1035";
+ break;
+ }
+ break;
+ case MPI_MANUFACTPAGE_DEVID_SAS1064:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "LSISAS1064 A1";
+ break;
+ case 0x01:
+ product_str = "LSISAS1064 A2";
+ break;
+ case 0x02:
+ product_str = "LSISAS1064 A3";
+ break;
+ case 0x03:
+ product_str = "LSISAS1064 A4";
+ break;
+ default:
+ product_str = "LSISAS1064";
+ break;
+ }
+ break;
+ case MPI_MANUFACTPAGE_DEVID_SAS1064E:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "LSISAS1064E A0";
+ break;
+ case 0x01:
+ product_str = "LSISAS1064E B0";
+ break;
+ case 0x02:
+ product_str = "LSISAS1064E B1";
+ break;
+ case 0x04:
+ product_str = "LSISAS1064E B2";
+ break;
+ case 0x08:
+ product_str = "LSISAS1064E B3";
+ break;
+ default:
+ product_str = "LSISAS1064E";
+ break;
+ }
+ break;
+ case MPI_MANUFACTPAGE_DEVID_SAS1068:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "LSISAS1068 A0";
+ break;
+ case 0x01:
+ product_str = "LSISAS1068 B0";
+ break;
+ case 0x02:
+ product_str = "LSISAS1068 B1";
+ break;
+ default:
+ product_str = "LSISAS1068";
+ break;
+ }
+ break;
+ case MPI_MANUFACTPAGE_DEVID_SAS1068E:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "LSISAS1068E A0";
+ break;
+ case 0x01:
+ product_str = "LSISAS1068E B0";
+ break;
+ case 0x02:
+ product_str = "LSISAS1068E B1";
+ break;
+ case 0x04:
+ product_str = "LSISAS1068E B2";
+ break;
+ case 0x08:
+ product_str = "LSISAS1068E B3";
+ break;
+ default:
+ product_str = "LSISAS1068E";
+ break;
+ }
+ break;
+ case MPI_MANUFACTPAGE_DEVID_SAS1078:
+ switch (revision)
+ {
+ case 0x00:
+ product_str = "LSISAS1078 A0";
+ break;
+ case 0x01:
+ product_str = "LSISAS1078 B0";
+ break;
+ case 0x02:
+ product_str = "LSISAS1078 C0";
+ break;
+ case 0x03:
+ product_str = "LSISAS1078 C1";
+ break;
+ case 0x04:
+ product_str = "LSISAS1078 C2";
+ break;
+ default:
+ product_str = "LSISAS1078";
+ break;
+ }
+ break;
+ }
+
+ out:
+ return product_str;
+}
+
+/**
+ * mpt_mapresources - map in memory mapped io
+ * @ioc: Pointer to pointer to IOC adapter
+ *
+ **/
+static int
+mpt_mapresources(MPT_ADAPTER *ioc)
+{
+ u8 __iomem *mem;
+ int ii;
+ resource_size_t mem_phys;
+ unsigned long port;
+ u32 msize;
+ u32 psize;
+ int r = -ENODEV;
+ struct pci_dev *pdev;
+
+ pdev = ioc->pcidev;
+ ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ if (pci_enable_device_mem(pdev)) {
+ printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
+ "failed\n", ioc->name);
+ return r;
+ }
+ if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
+ printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
+ "MEM failed\n", ioc->name);
+ goto out_pci_disable_device;
+ }
+
+ if (sizeof(dma_addr_t) > 4) {
+ const uint64_t required_mask = dma_get_required_mask
+ (&pdev->dev);
+ if (required_mask > DMA_BIT_MASK(32)
+ && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(64))) {
+ ioc->dma_mask = DMA_BIT_MASK(64);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(32))) {
+ ioc->dma_mask = DMA_BIT_MASK(32);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else {
+ printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+ ioc->name, pci_name(pdev));
+ goto out_pci_release_region;
+ }
+ } else {
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(32))) {
+ ioc->dma_mask = DMA_BIT_MASK(32);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else {
+ printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+ ioc->name, pci_name(pdev));
+ goto out_pci_release_region;
+ }
+ }
+
+ mem_phys = msize = 0;
+ port = psize = 0;
+ for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
+ if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
+ if (psize)
+ continue;
+ /* Get I/O space! */
+ port = pci_resource_start(pdev, ii);
+ psize = pci_resource_len(pdev, ii);
+ } else {
+ if (msize)
+ continue;
+ /* Get memmap */
+ mem_phys = pci_resource_start(pdev, ii);
+ msize = pci_resource_len(pdev, ii);
+ }
+ }
+ ioc->mem_size = msize;
+
+ mem = NULL;
+ /* Get logical ptr for PciMem0 space */
+ /*mem = ioremap(mem_phys, msize);*/
+ mem = ioremap(mem_phys, msize);
+ if (mem == NULL) {
+ printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
+ " memory!\n", ioc->name);
+ r = -EINVAL;
+ goto out_pci_release_region;
+ }
+ ioc->memmap = mem;
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
+ ioc->name, mem, (unsigned long long)mem_phys));
+
+ ioc->mem_phys = mem_phys;
+ ioc->chip = (SYSIF_REGS __iomem *)mem;
+
+ /* Save Port IO values in case we need to do downloadboot */
+ ioc->pio_mem_phys = port;
+ ioc->pio_chip = (SYSIF_REGS __iomem *)port;
+
+ return 0;
+
+out_pci_release_region:
+ pci_release_selected_regions(pdev, ioc->bars);
+out_pci_disable_device:
+ pci_disable_device(pdev);
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_attach - Install a PCI intelligent MPT adapter.
+ * @pdev: Pointer to pci_dev structure
+ * @id: PCI device ID information
+ *
+ * This routine performs all the steps necessary to bring the IOC of
+ * a MPT adapter to a OPERATIONAL state. This includes registering
+ * memory regions, registering the interrupt, and allocating request
+ * and reply memory pools.
+ *
+ * This routine also pre-fetches the LAN MAC address of a Fibre Channel
+ * MPT adapter.
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * TODO: Add support for polled controllers
+ */
+int
+mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ MPT_ADAPTER *ioc;
+ u8 cb_idx;
+ int r = -ENODEV;
+ u8 pcixcmd;
+ static int mpt_ids = 0;
+#ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *dent;
+#endif
+
+ ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
+ if (ioc == NULL) {
+ printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
+ return -ENOMEM;
+ }
+
+ ioc->id = mpt_ids++;
+ sprintf(ioc->name, "ioc%d", ioc->id);
+ dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
+
+ /*
+ * set initial debug level
+ * (refer to mptdebug.h)
+ *
+ */
+ ioc->debug_level = mpt_debug_level;
+ if (mpt_debug_level)
+ printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
+
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
+
+ ioc->pcidev = pdev;
+ if (mpt_mapresources(ioc)) {
+ kfree(ioc);
+ return r;
+ }
+
+ /*
+ * Setting up proper handlers for scatter gather handling
+ */
+ if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+ if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+ ioc->add_sge = &mpt_add_sge_64bit_1078;
+ else
+ ioc->add_sge = &mpt_add_sge_64bit;
+ ioc->add_chain = &mpt_add_chain_64bit;
+ ioc->sg_addr_size = 8;
+ } else {
+ ioc->add_sge = &mpt_add_sge;
+ ioc->add_chain = &mpt_add_chain;
+ ioc->sg_addr_size = 4;
+ }
+ ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
+ ioc->alloc_total = sizeof(MPT_ADAPTER);
+ ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
+ ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
+
+
+ spin_lock_init(&ioc->taskmgmt_lock);
+ mutex_init(&ioc->internal_cmds.mutex);
+ init_completion(&ioc->internal_cmds.done);
+ mutex_init(&ioc->mptbase_cmds.mutex);
+ init_completion(&ioc->mptbase_cmds.done);
+ mutex_init(&ioc->taskmgmt_cmds.mutex);
+ init_completion(&ioc->taskmgmt_cmds.done);
+
+ /* Initialize the event logging.
+ */
+ ioc->eventTypes = 0; /* None */
+ ioc->eventContext = 0;
+ ioc->eventLogSize = 0;
+ ioc->events = NULL;
+
+#ifdef MFCNT
+ ioc->mfcnt = 0;
+#endif
+
+ ioc->sh = NULL;
+ ioc->cached_fw = NULL;
+
+ /* Initialize SCSI Config Data structure
+ */
+ memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
+
+ /* Initialize the fc rport list head.
+ */
+ INIT_LIST_HEAD(&ioc->fc_rports);
+
+ /* Find lookup slot. */
+ INIT_LIST_HEAD(&ioc->list);
+
+
+ /* Initialize workqueue */
+ INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
+
+ snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
+ "mpt_poll_%d", ioc->id);
+ ioc->reset_work_q =
+ create_singlethread_workqueue(ioc->reset_work_q_name);
+ if (!ioc->reset_work_q) {
+ printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
+ ioc->name);
+ pci_release_selected_regions(pdev, ioc->bars);
+ kfree(ioc);
+ return -ENOMEM;
+ }
+
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
+ ioc->name, &ioc->facts, &ioc->pfacts[0]));
+
+ ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
+ pdev->revision);
+
+ switch (pdev->device)
+ {
+ case MPI_MANUFACTPAGE_DEVICEID_FC939X:
+ case MPI_MANUFACTPAGE_DEVICEID_FC949X:
+ ioc->errata_flag_1064 = 1;
+ case MPI_MANUFACTPAGE_DEVICEID_FC909:
+ case MPI_MANUFACTPAGE_DEVICEID_FC929:
+ case MPI_MANUFACTPAGE_DEVICEID_FC919:
+ case MPI_MANUFACTPAGE_DEVICEID_FC949E:
+ ioc->bus_type = FC;
+ break;
+
+ case MPI_MANUFACTPAGE_DEVICEID_FC929X:
+ if (pdev->revision < XL_929) {
+ /* 929X Chip Fix. Set Split transactions level
+ * for PCIX. Set MOST bits to zero.
+ */
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd &= 0x8F;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ } else {
+ /* 929XL Chip Fix. Set MMRBC to 0x08.
+ */
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd |= 0x08;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ }
+ ioc->bus_type = FC;
+ break;
+
+ case MPI_MANUFACTPAGE_DEVICEID_FC919X:
+ /* 919X Chip Fix. Set Split transactions level
+ * for PCIX. Set MOST bits to zero.
+ */
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd &= 0x8F;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ ioc->bus_type = FC;
+ break;
+
+ case MPI_MANUFACTPAGE_DEVID_53C1030:
+ /* 1030 Chip Fix. Disable Split transactions
+ * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
+ */
+ if (pdev->revision < C0_1030) {
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd &= 0x8F;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ }
+
+ case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
+ ioc->bus_type = SPI;
+ break;
+
+ case MPI_MANUFACTPAGE_DEVID_SAS1064:
+ case MPI_MANUFACTPAGE_DEVID_SAS1068:
+ ioc->errata_flag_1064 = 1;
+ ioc->bus_type = SAS;
+ break;
+
+ case MPI_MANUFACTPAGE_DEVID_SAS1064E:
+ case MPI_MANUFACTPAGE_DEVID_SAS1068E:
+ case MPI_MANUFACTPAGE_DEVID_SAS1078:
+ ioc->bus_type = SAS;
+ break;
+ }
+
+
+ switch (ioc->bus_type) {
+
+ case SAS:
+ ioc->msi_enable = mpt_msi_enable_sas;
+ break;
+
+ case SPI:
+ ioc->msi_enable = mpt_msi_enable_spi;
+ break;
+
+ case FC:
+ ioc->msi_enable = mpt_msi_enable_fc;
+ break;
+
+ default:
+ ioc->msi_enable = 0;
+ break;
+ }
+
+ ioc->fw_events_off = 1;
+
+ if (ioc->errata_flag_1064)
+ pci_disable_io_access(pdev);
+
+ spin_lock_init(&ioc->FreeQlock);
+
+ /* Disable all! */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ /* Set IOC ptr in the pcidev's driver data. */
+ pci_set_drvdata(ioc->pcidev, ioc);
+
+ /* Set lookup ptr. */
+ list_add_tail(&ioc->list, &ioc_list);
+
+ /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
+ */
+ mpt_detect_bound_ports(ioc, pdev);
+
+ INIT_LIST_HEAD(&ioc->fw_event_list);
+ spin_lock_init(&ioc->fw_event_lock);
+ snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
+ ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
+
+ if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+ CAN_SLEEP)) != 0){
+ printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
+ ioc->name, r);
+
+ list_del(&ioc->list);
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
+ iounmap(ioc->memmap);
+ if (r != -5)
+ pci_release_selected_regions(pdev, ioc->bars);
+
+ destroy_workqueue(ioc->reset_work_q);
+ ioc->reset_work_q = NULL;
+
+ kfree(ioc);
+ pci_set_drvdata(pdev, NULL);
+ return r;
+ }
+
+ /* call per device driver probe entry point */
+ for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
+ if(MptDeviceDriverHandlers[cb_idx] &&
+ MptDeviceDriverHandlers[cb_idx]->probe) {
+ MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
+ }
+ }
+
+#ifdef CONFIG_PROC_FS
+ /*
+ * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
+ */
+ dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
+ if (dent) {
+ proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
+ proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
+ }
+#endif
+
+ if (!ioc->alt_ioc)
+ queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
+ msecs_to_jiffies(MPT_POLLING_INTERVAL));
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_detach - Remove a PCI intelligent MPT adapter.
+ * @pdev: Pointer to pci_dev structure
+ */
+
+void
+mpt_detach(struct pci_dev *pdev)
+{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ char pname[32];
+ u8 cb_idx;
+ unsigned long flags;
+ struct workqueue_struct *wq;
+
+ /*
+ * Stop polling ioc for fault condition
+ */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ wq = ioc->reset_work_q;
+ ioc->reset_work_q = NULL;
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ cancel_delayed_work(&ioc->fault_reset_work);
+ destroy_workqueue(wq);
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ wq = ioc->fw_event_q;
+ ioc->fw_event_q = NULL;
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+ destroy_workqueue(wq);
+
+ sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
+ remove_proc_entry(pname, NULL);
+ sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
+ remove_proc_entry(pname, NULL);
+ sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
+ remove_proc_entry(pname, NULL);
+
+ /* call per device driver remove entry point */
+ for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
+ if(MptDeviceDriverHandlers[cb_idx] &&
+ MptDeviceDriverHandlers[cb_idx]->remove) {
+ MptDeviceDriverHandlers[cb_idx]->remove(pdev);
+ }
+ }
+
+ /* Disable interrupts! */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+
+ ioc->active = 0;
+ synchronize_irq(pdev->irq);
+
+ /* Clear any lingering interrupt */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ CHIPREG_READ32(&ioc->chip->IntStatus);
+
+ mpt_adapter_dispose(ioc);
+
+}
+
+/**************************************************************************
+ * Power Management
+ */
+#ifdef CONFIG_PM
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_suspend - Fusion MPT base driver suspend routine.
+ * @pdev: Pointer to pci_dev structure
+ * @state: new state to enter
+ */
+int
+mpt_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ u32 device_state;
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+ device_state = pci_choose_state(pdev, state);
+ printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
+ "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
+ device_state);
+
+ /* put ioc into READY_STATE */
+ if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
+ printk(MYIOC_s_ERR_FMT
+ "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
+ }
+
+ /* disable interrupts */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+
+ /* Clear any lingering interrupt */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ free_irq(ioc->pci_irq, ioc);
+ if (ioc->msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ ioc->pci_irq = -1;
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_release_selected_regions(pdev, ioc->bars);
+ pci_set_power_state(pdev, device_state);
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_resume - Fusion MPT base driver resume routine.
+ * @pdev: Pointer to pci_dev structure
+ */
+int
+mpt_resume(struct pci_dev *pdev)
+{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ u32 device_state = pdev->current_state;
+ int recovery_state;
+ int err;
+
+ printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
+ "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
+ device_state);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+ ioc->pcidev = pdev;
+ err = mpt_mapresources(ioc);
+ if (err)
+ return err;
+
+ if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+ if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+ ioc->add_sge = &mpt_add_sge_64bit_1078;
+ else
+ ioc->add_sge = &mpt_add_sge_64bit;
+ ioc->add_chain = &mpt_add_chain_64bit;
+ ioc->sg_addr_size = 8;
+ } else {
+
+ ioc->add_sge = &mpt_add_sge;
+ ioc->add_chain = &mpt_add_chain;
+ ioc->sg_addr_size = 4;
+ }
+ ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
+ printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
+ ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
+ CHIPREG_READ32(&ioc->chip->Doorbell));
+
+ /*
+ * Errata workaround for SAS pci express:
+ * Upon returning to the D0 state, the contents of the doorbell will be
+ * stale data, and this will incorrectly signal to the host driver that
+ * the firmware is ready to process mpt commands. The workaround is
+ * to issue a diagnostic reset.
+ */
+ if (ioc->bus_type == SAS && (pdev->device ==
+ MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
+ MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
+ if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
+ printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
+ ioc->name);
+ goto out;
+ }
+ }
+
+ /* bring ioc to operational state */
+ printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
+ recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+ CAN_SLEEP);
+ if (recovery_state != 0)
+ printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
+ "error:[%x]\n", ioc->name, recovery_state);
+ else
+ printk(MYIOC_s_INFO_FMT
+ "pci-resume: success\n", ioc->name);
+ out:
+ return 0;
+
+}
+#endif
+
+static int
+mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
+{
+ if ((MptDriverClass[index] == MPTSPI_DRIVER &&
+ ioc->bus_type != SPI) ||
+ (MptDriverClass[index] == MPTFC_DRIVER &&
+ ioc->bus_type != FC) ||
+ (MptDriverClass[index] == MPTSAS_DRIVER &&
+ ioc->bus_type != SAS))
+ /* make sure we only call the relevant reset handler
+ * for the bus */
+ return 0;
+ return (MptResetHandlers[index])(ioc, reset_phase);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
+ * @ioc: Pointer to MPT adapter structure
+ * @reason: Event word / reason
+ * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
+ *
+ * This routine performs all the steps necessary to bring the IOC
+ * to a OPERATIONAL state.
+ *
+ * This routine also pre-fetches the LAN MAC address of a Fibre Channel
+ * MPT adapter.
+ *
+ * Returns:
+ * 0 for success
+ * -1 if failed to get board READY
+ * -2 if READY but IOCFacts Failed
+ * -3 if READY but PrimeIOCFifos Failed
+ * -4 if READY but IOCInit Failed
+ * -5 if failed to enable_device and/or request_selected_regions
+ * -6 if failed to upload firmware
+ */
+static int
+mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
+{
+ int hard_reset_done = 0;
+ int alt_ioc_ready = 0;
+ int hard;
+ int rc=0;
+ int ii;
+ int ret = 0;
+ int reset_alt_ioc_active = 0;
+ int irq_allocated = 0;
+ u8 *a;
+
+ printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
+ reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
+
+ /* Disable reply interrupts (also blocks FreeQ) */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+
+ if (ioc->alt_ioc) {
+ if (ioc->alt_ioc->active ||
+ reason == MPT_HOSTEVENT_IOC_RECOVER) {
+ reset_alt_ioc_active = 1;
+ /* Disable alt-IOC's reply interrupts
+ * (and FreeQ) for a bit
+ **/
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+ 0xFFFFFFFF);
+ ioc->alt_ioc->active = 0;
+ }
+ }
+
+ hard = 1;
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
+ hard = 0;
+
+ if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
+ if (hard_reset_done == -4) {
+ printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
+ ioc->name);
+
+ if (reset_alt_ioc_active && ioc->alt_ioc) {
+ /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
+ dprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
+ ioc->alt_ioc->active = 1;
+ }
+
+ } else {
+ printk(MYIOC_s_WARN_FMT
+ "NOT READY WARNING!\n", ioc->name);
+ }
+ ret = -1;
+ goto out;
+ }
+
+ /* hard_reset_done = 0 if a soft reset was performed
+ * and 1 if a hard reset was performed.
+ */
+ if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
+ if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
+ alt_ioc_ready = 1;
+ else
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc Not ready WARNING!\n",
+ ioc->alt_ioc->name);
+ }
+
+ for (ii=0; ii<5; ii++) {
+ /* Get IOC facts! Allow 5 retries */
+ if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
+ break;
+ }
+
+
+ if (ii == 5) {
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Retry IocFacts failed rc=%x\n", ioc->name, rc));
+ ret = -2;
+ } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ MptDisplayIocCapabilities(ioc);
+ }
+
+ if (alt_ioc_ready) {
+ if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Initial Alt IocFacts failed rc=%x\n",
+ ioc->name, rc));
+ /* Retry - alt IOC was initialized once
+ */
+ rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
+ }
+ if (rc) {
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
+ alt_ioc_ready = 0;
+ reset_alt_ioc_active = 0;
+ } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ MptDisplayIocCapabilities(ioc->alt_ioc);
+ }
+ }
+
+ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
+ (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
+ pci_release_selected_regions(ioc->pcidev, ioc->bars);
+ ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
+ IORESOURCE_IO);
+ if (pci_enable_device(ioc->pcidev))
+ return -5;
+ if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
+ "mpt"))
+ return -5;
+ }
+
+ /*
+ * Device is reset now. It must have de-asserted the interrupt line
+ * (if it was asserted) and it should be safe to register for the
+ * interrupt now.
+ */
+ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
+ ioc->pci_irq = -1;
+ if (ioc->pcidev->irq) {
+ if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
+ printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
+ ioc->name);
+ else
+ ioc->msi_enable = 0;
+ rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
+ IRQF_SHARED, ioc->name, ioc);
+ if (rc < 0) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate "
+ "interrupt %d!\n",
+ ioc->name, ioc->pcidev->irq);
+ if (ioc->msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ ret = -EBUSY;
+ goto out;
+ }
+ irq_allocated = 1;
+ ioc->pci_irq = ioc->pcidev->irq;
+ pci_set_master(ioc->pcidev); /* ?? */
+ pci_set_drvdata(ioc->pcidev, ioc);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "installed at interrupt %d\n", ioc->name,
+ ioc->pcidev->irq));
+ }
+ }
+
+ /* Prime reply & request queues!
+ * (mucho alloc's) Must be done prior to
+ * init as upper addresses are needed for init.
+ * If fails, continue with alt-ioc processing
+ */
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
+ ioc->name));
+ if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
+ ret = -3;
+
+ /* May need to check/upload firmware & data here!
+ * If fails, continue with alt-ioc processing
+ */
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
+ ioc->name));
+ if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
+ ret = -4;
+// NEW!
+ if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
+ ioc->alt_ioc->name, rc);
+ alt_ioc_ready = 0;
+ reset_alt_ioc_active = 0;
+ }
+
+ if (alt_ioc_ready) {
+ if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
+ alt_ioc_ready = 0;
+ reset_alt_ioc_active = 0;
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc: (%d) init failure WARNING!\n",
+ ioc->alt_ioc->name, rc);
+ }
+ }
+
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
+ if (ioc->upload_fw) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "firmware upload required!\n", ioc->name));
+
+ /* Controller is not operational, cannot do upload
+ */
+ if (ret == 0) {
+ rc = mpt_do_upload(ioc, sleepFlag);
+ if (rc == 0) {
+ if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
+ /*
+ * Maintain only one pointer to FW memory
+ * so there will not be two attempt to
+ * downloadboot onboard dual function
+ * chips (mpt_adapter_disable,
+ * mpt_diag_reset)
+ */
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "mpt_upload: alt_%s has cached_fw=%p \n",
+ ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
+ ioc->cached_fw = NULL;
+ }
+ } else {
+ printk(MYIOC_s_WARN_FMT
+ "firmware upload failure!\n", ioc->name);
+ ret = -6;
+ }
+ }
+ }
+ }
+
+ /* Enable MPT base driver management of EventNotification
+ * and EventAck handling.
+ */
+ if ((ret == 0) && (!ioc->facts.EventState)) {
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "SendEventNotification\n",
+ ioc->name));
+ ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
+ }
+
+ if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
+ rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
+
+ if (ret == 0) {
+ /* Enable! (reply interrupt) */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
+ ioc->active = 1;
+ }
+ if (rc == 0) { /* alt ioc */
+ if (reset_alt_ioc_active && ioc->alt_ioc) {
+ /* (re)Enable alt-IOC! (reply interrupt) */
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
+ "reply irq re-enabled\n",
+ ioc->alt_ioc->name));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+ MPI_HIM_DIM);
+ ioc->alt_ioc->active = 1;
+ }
+ }
+
+
+ /* Add additional "reason" check before call to GetLanConfigPages
+ * (combined with GetIoUnitPage2 call). This prevents a somewhat
+ * recursive scenario; GetLanConfigPages times out, timer expired
+ * routine calls HardResetHandler, which calls into here again,
+ * and we try GetLanConfigPages again...
+ */
+ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
+
+ /*
+ * Initialize link list for inactive raid volumes.
+ */
+ mutex_init(&ioc->raid_data.inactive_list_mutex);
+ INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
+
+ switch (ioc->bus_type) {
+
+ case SAS:
+ /* clear persistency table */
+ if(ioc->facts.IOCExceptions &
+ MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
+ ret = mptbase_sas_persist_operation(ioc,
+ MPI_SAS_OP_CLEAR_NOT_PRESENT);
+ if(ret != 0)
+ goto out;
+ }
+
+ /* Find IM volumes
+ */
+ mpt_findImVolumes(ioc);
+
+ /* Check, and possibly reset, the coalescing value
+ */
+ mpt_read_ioc_pg_1(ioc);
+
+ break;
+
+ case FC:
+ if ((ioc->pfacts[0].ProtocolFlags &
+ MPI_PORTFACTS_PROTOCOL_LAN) &&
+ (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
+ /*
+ * Pre-fetch the ports LAN MAC address!
+ * (LANPage1_t stuff)
+ */
+ (void) GetLanConfigPages(ioc);
+ a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "LanAddr = %02X:%02X:%02X"
+ ":%02X:%02X:%02X\n",
+ ioc->name, a[5], a[4],
+ a[3], a[2], a[1], a[0]));
+ }
+ break;
+
+ case SPI:
+ /* Get NVRAM and adapter maximums from SPP 0 and 2
+ */
+ mpt_GetScsiPortSettings(ioc, 0);
+
+ /* Get version and length of SDP 1
+ */
+ mpt_readScsiDevicePageHeaders(ioc, 0);
+
+ /* Find IM volumes
+ */
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
+ mpt_findImVolumes(ioc);
+
+ /* Check, and possibly reset, the coalescing value
+ */
+ mpt_read_ioc_pg_1(ioc);
+
+ mpt_read_ioc_pg_4(ioc);
+
+ break;
+ }
+
+ GetIoUnitPage2(ioc);
+ mpt_get_manufacturing_pg_0(ioc);
+ }
+
+ out:
+ if ((ret != 0) && irq_allocated) {
+ free_irq(ioc->pci_irq, ioc);
+ if (ioc->msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ }
+ return ret;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
+ * @ioc: Pointer to MPT adapter structure
+ * @pdev: Pointer to (struct pci_dev) structure
+ *
+ * Search for PCI bus/dev_function which matches
+ * PCI bus/dev_function (+/-1) for newly discovered 929,
+ * 929X, 1030 or 1035.
+ *
+ * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
+ * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
+ */
+static void
+mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
+{
+ struct pci_dev *peer=NULL;
+ unsigned int slot = PCI_SLOT(pdev->devfn);
+ unsigned int func = PCI_FUNC(pdev->devfn);
+ MPT_ADAPTER *ioc_srch;
+
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
+ " searching for devfn match on %x or %x\n",
+ ioc->name, pci_name(pdev), pdev->bus->number,
+ pdev->devfn, func-1, func+1));
+
+ peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
+ if (!peer) {
+ peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
+ if (!peer)
+ return;
+ }
+
+ list_for_each_entry(ioc_srch, &ioc_list, list) {
+ struct pci_dev *_pcidev = ioc_srch->pcidev;
+ if (_pcidev == peer) {
+ /* Paranoia checks */
+ if (ioc->alt_ioc != NULL) {
+ printk(MYIOC_s_WARN_FMT
+ "Oops, already bound (%s <==> %s)!\n",
+ ioc->name, ioc->name, ioc->alt_ioc->name);
+ break;
+ } else if (ioc_srch->alt_ioc != NULL) {
+ printk(MYIOC_s_WARN_FMT
+ "Oops, already bound (%s <==> %s)!\n",
+ ioc_srch->name, ioc_srch->name,
+ ioc_srch->alt_ioc->name);
+ break;
+ }
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "FOUND! binding %s <==> %s\n",
+ ioc->name, ioc->name, ioc_srch->name));
+ ioc_srch->alt_ioc = ioc;
+ ioc->alt_ioc = ioc_srch;
+ }
+ }
+ pci_dev_put(peer);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_adapter_disable - Disable misbehaving MPT adapter.
+ * @ioc: Pointer to MPT adapter structure
+ */
+static void
+mpt_adapter_disable(MPT_ADAPTER *ioc)
+{
+ int sz;
+ int ret;
+
+ if (ioc->cached_fw != NULL) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Pushing FW onto adapter\n", __func__, ioc->name));
+ if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
+ ioc->cached_fw, CAN_SLEEP)) < 0) {
+ printk(MYIOC_s_WARN_FMT
+ ": firmware downloadboot failure (%d)!\n",
+ ioc->name, ret);
+ }
+ }
+
+ /*
+ * Put the controller into ready state (if its not already)
+ */
+ if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
+ if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
+ CAN_SLEEP)) {
+ if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
+ printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
+ "reset failed to put ioc in ready state!\n",
+ ioc->name, __func__);
+ } else
+ printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
+ "failed!\n", ioc->name, __func__);
+ }
+
+
+ /* Disable adapter interrupts! */
+ synchronize_irq(ioc->pcidev->irq);
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+
+ /* Clear any lingering interrupt */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ CHIPREG_READ32(&ioc->chip->IntStatus);
+
+ if (ioc->alloc != NULL) {
+ sz = ioc->alloc_sz;
+ dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
+ ioc->name, ioc->alloc, ioc->alloc_sz));
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->alloc, ioc->alloc_dma);
+ ioc->reply_frames = NULL;
+ ioc->req_frames = NULL;
+ ioc->alloc = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->sense_buf_pool != NULL) {
+ sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
+ ioc->sense_buf_pool = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->events != NULL){
+ sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
+ kfree(ioc->events);
+ ioc->events = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ mpt_free_fw_memory(ioc);
+
+ kfree(ioc->spi_data.nvram);
+ mpt_inactive_raid_list_free(ioc);
+ kfree(ioc->raid_data.pIocPg2);
+ kfree(ioc->raid_data.pIocPg3);
+ ioc->spi_data.nvram = NULL;
+ ioc->raid_data.pIocPg3 = NULL;
+
+ if (ioc->spi_data.pIocPg4 != NULL) {
+ sz = ioc->spi_data.IocPg4Sz;
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->spi_data.pIocPg4,
+ ioc->spi_data.IocPg4_dma);
+ ioc->spi_data.pIocPg4 = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->ReqToChain != NULL) {
+ kfree(ioc->ReqToChain);
+ kfree(ioc->RequestNB);
+ ioc->ReqToChain = NULL;
+ }
+
+ kfree(ioc->ChainToChain);
+ ioc->ChainToChain = NULL;
+
+ if (ioc->HostPageBuffer != NULL) {
+ if((ret = mpt_host_page_access_control(ioc,
+ MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
+ printk(MYIOC_s_ERR_FMT
+ ": %s: host page buffers free failed (%d)!\n",
+ ioc->name, __func__, ret);
+ }
+ dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "HostPageBuffer free @ %p, sz=%d bytes\n",
+ ioc->name, ioc->HostPageBuffer,
+ ioc->HostPageBuffer_sz));
+ pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
+ ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
+ ioc->HostPageBuffer = NULL;
+ ioc->HostPageBuffer_sz = 0;
+ ioc->alloc_total -= ioc->HostPageBuffer_sz;
+ }
+
+ pci_set_drvdata(ioc->pcidev, NULL);
+}
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_adapter_dispose - Free all resources associated with an MPT adapter
+ * @ioc: Pointer to MPT adapter structure
+ *
+ * This routine unregisters h/w resources and frees all alloc'd memory
+ * associated with a MPT adapter structure.
+ */
+static void
+mpt_adapter_dispose(MPT_ADAPTER *ioc)
+{
+ int sz_first, sz_last;
+
+ if (ioc == NULL)
+ return;
+
+ sz_first = ioc->alloc_total;
+
+ mpt_adapter_disable(ioc);
+
+ if (ioc->pci_irq != -1) {
+ free_irq(ioc->pci_irq, ioc);
+ if (ioc->msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ ioc->pci_irq = -1;
+ }
+
+ if (ioc->memmap != NULL) {
+ iounmap(ioc->memmap);
+ ioc->memmap = NULL;
+ }
+
+ pci_disable_device(ioc->pcidev);
+ pci_release_selected_regions(ioc->pcidev, ioc->bars);
+
+#if defined(CONFIG_MTRR) && 0
+ if (ioc->mtrr_reg > 0) {
+ mtrr_del(ioc->mtrr_reg, 0, 0);
+ dprintk(ioc, printk(MYIOC_s_INFO_FMT "MTRR region de-registered\n", ioc->name));
+ }
+#endif
+
+ /* Zap the adapter lookup ptr! */
+ list_del(&ioc->list);
+
+ sz_last = ioc->alloc_total;
+ dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
+ ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
+
+ kfree(ioc);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * MptDisplayIocCapabilities - Disply IOC's capabilities.
+ * @ioc: Pointer to MPT adapter structure
+ */
+static void
+MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
+{
+ int i = 0;
+
+ printk(KERN_INFO "%s: ", ioc->name);
+ if (ioc->prod_name)
+ printk("%s: ", ioc->prod_name);
+ printk("Capabilities={");
+
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
+ printk("Initiator");
+ i++;
+ }
+
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
+ printk("%sTarget", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
+ printk("%sLAN", i ? "," : "");
+ i++;
+ }
+
+#if 0
+ /*
+ * This would probably evoke more questions than it's worth
+ */
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
+ printk("%sLogBusAddr", i ? "," : "");
+ i++;
+ }
+#endif
+
+ printk("}\n");
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @force: Force hard KickStart of IOC
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Returns:
+ * 1 - DIAG reset and READY
+ * 0 - READY initially OR soft reset and READY
+ * -1 - Any failure on KickStart
+ * -2 - Msg Unit Reset Failed
+ * -3 - IO Unit Reset Failed
+ * -4 - IOC owned by a PEER
+ */
+static int
+MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
+{
+ u32 ioc_state;
+ int statefault = 0;
+ int cntdn;
+ int hard_reset_done = 0;
+ int r;
+ int ii;
+ int whoinit;
+
+ /* Get current [raw] IOC state */
+ ioc_state = mpt_GetIocState(ioc, 0);
+ dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
+
+ /*
+ * Check to see if IOC got left/stuck in doorbell handshake
+ * grip of death. If so, hard reset the IOC.
+ */
+ if (ioc_state & MPI_DOORBELL_ACTIVE) {
+ statefault = 1;
+ printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
+ ioc->name);
+ }
+
+ /* Is it already READY? */
+ if (!statefault &&
+ ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "IOC is in READY state\n", ioc->name));
+ return 0;
+ }
+
+ /*
+ * Check to see if IOC is in FAULT state.
+ */
+ if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+ statefault = 2;
+ printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
+ ioc->name);
+ printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
+ ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
+ }
+
+ /*
+ * Hmmm... Did it get left operational?
+ */
+ if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
+ ioc->name));
+
+ /* Check WhoInit.
+ * If PCI Peer, exit.
+ * Else, if no fault conditions are present, issue a MessageUnitReset
+ * Else, fall through to KickStart case
+ */
+ whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "whoinit 0x%x statefault %d force %d\n",
+ ioc->name, whoinit, statefault, force));
+ if (whoinit == MPI_WHOINIT_PCI_PEER)
+ return -4;
+ else {
+ if ((statefault == 0 ) && (force == 0)) {
+ if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
+ return 0;
+ }
+ statefault = 3;
+ }
+ }
+
+ hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
+ if (hard_reset_done < 0)
+ return -1;
+
+ /*
+ * Loop here waiting for IOC to come READY.
+ */
+ ii = 0;
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
+
+ while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
+ if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
+ /*
+ * BIOS or previous driver load left IOC in OP state.
+ * Reset messaging FIFOs.
+ */
+ if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
+ return -2;
+ }
+ } else if (ioc_state == MPI_IOC_STATE_RESET) {
+ /*
+ * Something is wrong. Try to get IOC back
+ * to a known state.
+ */
+ if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
+ return -3;
+ }
+ }
+
+ ii++; cntdn--;
+ if (!cntdn) {
+ printk(MYIOC_s_ERR_FMT
+ "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+ ioc->name, ioc_state, (int)((ii+5)/HZ));
+ return -ETIME;
+ }
+
+ if (sleepFlag == CAN_SLEEP) {
+ msleep(1);
+ } else {
+ mdelay (1); /* 1 msec delay */
+ }
+
+ }
+
+ if (statefault < 3) {
+ printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
+ statefault == 1 ? "stuck handshake" : "IOC FAULT");
+ }
+
+ return hard_reset_done;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_GetIocState - Get the current state of a MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @cooked: Request raw or cooked IOC state
+ *
+ * Returns all IOC Doorbell register bits if cooked==0, else just the
+ * Doorbell bits in MPI_IOC_STATE_MASK.
+ */
+u32
+mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
+{
+ u32 s, sc;
+
+ /* Get! */
+ s = CHIPREG_READ32(&ioc->chip->Doorbell);
+ sc = s & MPI_IOC_STATE_MASK;
+
+ /* Save! */
+ ioc->last_state = sc;
+
+ return cooked ? sc : s;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * GetIocFacts - Send IOCFacts request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Specifies whether the process can sleep
+ * @reason: If recovery, only update facts.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
+{
+ IOCFacts_t get_facts;
+ IOCFactsReply_t *facts;
+ int r;
+ int req_sz;
+ int reply_sz;
+ int sz;
+ u32 status, vv;
+ u8 shiftFactor=1;
+
+ /* IOC *must* NOT be in RESET state! */
+ if (ioc->last_state == MPI_IOC_STATE_RESET) {
+ printk(KERN_ERR MYNAM
+ ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
+ ioc->name, ioc->last_state);
+ return -44;
+ }
+
+ facts = &ioc->facts;
+
+ /* Destination (reply area)... */
+ reply_sz = sizeof(*facts);
+ memset(facts, 0, reply_sz);
+
+ /* Request area (get_facts on the stack right now!) */
+ req_sz = sizeof(get_facts);
+ memset(&get_facts, 0, req_sz);
+
+ get_facts.Function = MPI_FUNCTION_IOC_FACTS;
+ /* Assert: All other get_facts fields are zero! */
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
+ ioc->name, req_sz, reply_sz));
+
+ /* No non-zero fields in the get_facts request are greater than
+ * 1 byte in size, so we can just fire it off as is.
+ */
+ r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
+ reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
+ if (r != 0)
+ return r;
+
+ /*
+ * Now byte swap (GRRR) the necessary fields before any further
+ * inspection of reply contents.
+ *
+ * But need to do some sanity checks on MsgLength (byte) field
+ * to make sure we don't zero IOC's req_sz!
+ */
+ /* Did we get a valid reply? */
+ if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ /*
+ * If not been here, done that, save off first WhoInit value
+ */
+ if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
+ ioc->FirstWhoInit = facts->WhoInit;
+ }
+
+ facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
+ facts->MsgContext = le32_to_cpu(facts->MsgContext);
+ facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
+ facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
+ facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
+ status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
+ /* CHECKME! IOCStatus, IOCLogInfo */
+
+ facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
+ facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
+
+ /*
+ * FC f/w version changed between 1.1 and 1.2
+ * Old: u16{Major(4),Minor(4),SubMinor(8)}
+ * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
+ */
+ if (facts->MsgVersion < MPI_VERSION_01_02) {
+ /*
+ * Handle old FC f/w style, convert to new...
+ */
+ u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
+ facts->FWVersion.Word =
+ ((oldv<<12) & 0xFF000000) |
+ ((oldv<<8) & 0x000FFF00);
+ } else
+ facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
+
+ facts->ProductID = le16_to_cpu(facts->ProductID);
+
+ if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
+ ioc->ir_firmware = 1;
+
+ facts->CurrentHostMfaHighAddr =
+ le32_to_cpu(facts->CurrentHostMfaHighAddr);
+ facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
+ facts->CurrentSenseBufferHighAddr =
+ le32_to_cpu(facts->CurrentSenseBufferHighAddr);
+ facts->CurReplyFrameSize =
+ le16_to_cpu(facts->CurReplyFrameSize);
+ facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
+
+ /*
+ * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
+ * Older MPI-1.00.xx struct had 13 dwords, and enlarged
+ * to 14 in MPI-1.01.0x.
+ */
+ if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
+ facts->MsgVersion > MPI_VERSION_01_00) {
+ facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
+ }
+
+ facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
+
+ if (!facts->RequestFrameSize) {
+ /* Something is wrong! */
+ printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
+ ioc->name);
+ return -55;
+ }
+
+ r = sz = facts->BlockSize;
+ vv = ((63 / (sz * 4)) + 1) & 0x03;
+ ioc->NB_for_64_byte_frame = vv;
+ while ( sz )
+ {
+ shiftFactor++;
+ sz = sz >> 1;
+ }
+ ioc->NBShiftFactor = shiftFactor;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
+ ioc->name, vv, shiftFactor, r));
+
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ /*
+ * Set values for this IOC's request & reply frame sizes,
+ * and request & reply queue depths...
+ */
+ ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
+ ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
+ ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
+ ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
+ ioc->name, ioc->reply_sz, ioc->reply_depth));
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
+ ioc->name, ioc->req_sz, ioc->req_depth));
+
+ /* Get port facts! */
+ if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
+ return r;
+ }
+ } else {
+ printk(MYIOC_s_ERR_FMT
+ "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
+ ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
+ RequestFrameSize)/sizeof(u32)));
+ return -66;
+ }
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * GetPortFacts - Send PortFacts request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @portnum: Port number
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
+{
+ PortFacts_t get_pfacts;
+ PortFactsReply_t *pfacts;
+ int ii;
+ int req_sz;
+ int reply_sz;
+ int max_id;
+
+ /* IOC *must* NOT be in RESET state! */
+ if (ioc->last_state == MPI_IOC_STATE_RESET) {
+ printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
+ ioc->name, ioc->last_state );
+ return -4;
+ }
+
+ pfacts = &ioc->pfacts[portnum];
+
+ /* Destination (reply area)... */
+ reply_sz = sizeof(*pfacts);
+ memset(pfacts, 0, reply_sz);
+
+ /* Request area (get_pfacts on the stack right now!) */
+ req_sz = sizeof(get_pfacts);
+ memset(&get_pfacts, 0, req_sz);
+
+ get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
+ get_pfacts.PortNumber = portnum;
+ /* Assert: All other get_pfacts fields are zero! */
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
+ ioc->name, portnum));
+
+ /* No non-zero fields in the get_pfacts request are greater than
+ * 1 byte in size, so we can just fire it off as is.
+ */
+ ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
+ reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
+ if (ii != 0)
+ return ii;
+
+ /* Did we get a valid reply? */
+
+ /* Now byte swap the necessary fields in the response. */
+ pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
+ pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
+ pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
+ pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
+ pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
+ pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
+ pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
+ pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
+ pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
+
+ max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
+ pfacts->MaxDevices;
+ ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
+ ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
+
+ /*
+ * Place all the devices on channels
+ *
+ * (for debuging)
+ */
+ if (mpt_channel_mapping) {
+ ioc->devices_per_bus = 1;
+ ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
+ }
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * SendIocInit - Send IOCInit request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ IOCInit_t ioc_init;
+ MPIDefaultReply_t init_reply;
+ u32 state;
+ int r;
+ int count;
+ int cntdn;
+
+ memset(&ioc_init, 0, sizeof(ioc_init));
+ memset(&init_reply, 0, sizeof(init_reply));
+
+ ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
+ ioc_init.Function = MPI_FUNCTION_IOC_INIT;
+
+ /* If we are in a recovery mode and we uploaded the FW image,
+ * then this pointer is not NULL. Skip the upload a second time.
+ * Set this flag if cached_fw set for either IOC.
+ */
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
+ ioc->upload_fw = 1;
+ else
+ ioc->upload_fw = 0;
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
+ ioc->name, ioc->upload_fw, ioc->facts.Flags));
+
+ ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
+ ioc_init.MaxBuses = (U8)ioc->number_of_buses;
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
+ ioc->name, ioc->facts.MsgVersion));
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
+ // set MsgVersion and HeaderVersion host driver was built with
+ ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
+ ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
+
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
+ ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
+ } else if(mpt_host_page_alloc(ioc, &ioc_init))
+ return -99;
+ }
+ ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
+
+ if (ioc->sg_addr_size == sizeof(u64)) {
+ /* Save the upper 32-bits of the request
+ * (reply) and sense buffers.
+ */
+ ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
+ ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
+ } else {
+ /* Force 32-bit addressing */
+ ioc_init.HostMfaHighAddr = cpu_to_le32(0);
+ ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
+ }
+
+ ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
+ ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
+ ioc->facts.MaxDevices = ioc_init.MaxDevices;
+ ioc->facts.MaxBuses = ioc_init.MaxBuses;
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
+ ioc->name, &ioc_init));
+
+ r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
+ sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
+ if (r != 0) {
+ printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
+ return r;
+ }
+
+ /* No need to byte swap the multibyte fields in the reply
+ * since we don't even look at its contents.
+ */
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
+ ioc->name, &ioc_init));
+
+ if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
+ return r;
+ }
+
+ /* YIKES! SUPER IMPORTANT!!!
+ * Poll IocState until _OPERATIONAL while IOC is doing
+ * LoopInit and TargetDiscovery!
+ */
+ count = 0;
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
+ state = mpt_GetIocState(ioc, 1);
+ while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
+ if (sleepFlag == CAN_SLEEP) {
+ msleep(1);
+ } else {
+ mdelay(1);
+ }
+
+ if (!cntdn) {
+ printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
+ ioc->name, (int)((count+5)/HZ));
+ return -9;
+ }
+
+ state = mpt_GetIocState(ioc, 1);
+ count++;
+ }
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
+ ioc->name, count));
+
+ ioc->aen_event_read_flag=0;
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * SendPortEnable - Send PortEnable request to MPT adapter port.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @portnum: Port number to enable
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Send PortEnable to bring IOC to OPERATIONAL state.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
+{
+ PortEnable_t port_enable;
+ MPIDefaultReply_t reply_buf;
+ int rc;
+ int req_sz;
+ int reply_sz;
+
+ /* Destination... */
+ reply_sz = sizeof(MPIDefaultReply_t);
+ memset(&reply_buf, 0, reply_sz);
+
+ req_sz = sizeof(PortEnable_t);
+ memset(&port_enable, 0, req_sz);
+
+ port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
+ port_enable.PortNumber = portnum;
+/* port_enable.ChainOffset = 0; */
+/* port_enable.MsgFlags = 0; */
+/* port_enable.MsgContext = 0; */
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
+ ioc->name, portnum, &port_enable));
+
+ /* RAID FW may take a long time to enable
+ */
+ if (ioc->ir_firmware || ioc->bus_type == SAS) {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 300 /*seconds*/, sleepFlag);
+ } else {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 30 /*seconds*/, sleepFlag);
+ }
+ return rc;
+}
+
+/**
+ * mpt_alloc_fw_memory - allocate firmware memory
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @size: total FW bytes
+ *
+ * If memory has already been allocated, the same (cached) value
+ * is returned.
+ *
+ * Return 0 if successful, or non-zero for failure
+ **/
+int
+mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
+{
+ int rc;
+
+ if (ioc->cached_fw) {
+ rc = 0; /* use already allocated memory */
+ goto out;
+ }
+ else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
+ ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
+ ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
+ rc = 0;
+ goto out;
+ }
+ ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
+ if (!ioc->cached_fw) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
+ ioc->name);
+ rc = -1;
+ } else {
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
+ ioc->alloc_total += size;
+ rc = 0;
+ }
+ out:
+ return rc;
+}
+
+/**
+ * mpt_free_fw_memory - free firmware memory
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * If alt_img is NULL, delete from ioc structure.
+ * Else, delete a secondary image in same format.
+ **/
+void
+mpt_free_fw_memory(MPT_ADAPTER *ioc)
+{
+ int sz;
+
+ if (!ioc->cached_fw)
+ return;
+
+ sz = ioc->facts.FWImageSize;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
+ pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
+ ioc->alloc_total -= sz;
+ ioc->cached_fw = NULL;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Returns 0 for success, >0 for handshake failure
+ * <0 for fw upload failure.
+ *
+ * Remark: If bound IOC and a successful FWUpload was performed
+ * on the bound IOC, the second image is discarded
+ * and memory is free'd. Both channels must upload to prevent
+ * IOC from running in degraded mode.
+ */
+static int
+mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ u8 reply[sizeof(FWUploadReply_t)];
+ FWUpload_t *prequest;
+ FWUploadReply_t *preply;
+ FWUploadTCSGE_t *ptcsge;
+ u32 flagsLength;
+ int ii, sz, reply_sz;
+ int cmdStatus;
+ int request_size;
+ /* If the image size is 0, we are done.
+ */
+ if ((sz = ioc->facts.FWImageSize) == 0)
+ return 0;
+
+ if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
+ return -ENOMEM;
+
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
+
+ prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
+ kzalloc(ioc->req_sz, GFP_KERNEL);
+ if (!prequest) {
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
+ "while allocating memory \n", ioc->name));
+ mpt_free_fw_memory(ioc);
+ return -ENOMEM;
+ }
+
+ preply = (FWUploadReply_t *)&reply;
+
+ reply_sz = sizeof(reply);
+ memset(preply, 0, reply_sz);
+
+ prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
+ prequest->Function = MPI_FUNCTION_FW_UPLOAD;
+
+ ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
+ ptcsge->DetailsLength = 12;
+ ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
+ ptcsge->ImageSize = cpu_to_le32(sz);
+ ptcsge++;
+
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
+ ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
+ request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
+ ioc->SGE_size;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
+ " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
+ ioc->facts.FWImageSize, request_size));
+ DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
+
+ ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
+ reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
+ "rc=%x \n", ioc->name, ii));
+
+ cmdStatus = -EFAULT;
+ if (ii == 0) {
+ /* Handshake transfer was complete and successful.
+ * Check the Reply Frame.
+ */
+ int status;
+ status = le16_to_cpu(preply->IOCStatus) &
+ MPI_IOCSTATUS_MASK;
+ if (status == MPI_IOCSTATUS_SUCCESS &&
+ ioc->facts.FWImageSize ==
+ le32_to_cpu(preply->ActualImageSize))
+ cmdStatus = 0;
+ }
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
+ ioc->name, cmdStatus));
+
+
+ if (cmdStatus) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
+ "freeing image \n", ioc->name));
+ mpt_free_fw_memory(ioc);
+ }
+ kfree(prequest);
+
+ return cmdStatus;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_downloadboot - DownloadBoot code
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @pFwHeader: Pointer to firmware header info
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * FwDownloadBoot requires Programmed IO access.
+ *
+ * Returns 0 for success
+ * -1 FW Image size is 0
+ * -2 No valid cached_fw Pointer
+ * <0 for fw upload failure.
+ */
+static int
+mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
+{
+ MpiExtImageHeader_t *pExtImage;
+ u32 fwSize;
+ u32 diag0val;
+ int count;
+ u32 *ptrFw;
+ u32 diagRwData;
+ u32 nextImage;
+ u32 load_addr;
+ u32 ioc_state=0;
+
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
+ ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
+
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
+
+ /* wait 1 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep(1);
+ } else {
+ mdelay (1);
+ }
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
+
+ for (count = 0; count < 30; count ++) {
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
+ ioc->name, count));
+ break;
+ }
+ /* wait .1 sec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (100);
+ } else {
+ mdelay (100);
+ }
+ }
+
+ if ( count == 30 ) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
+ "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
+ ioc->name, diag0val));
+ return -3;
+ }
+
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ /* Set the DiagRwEn and Disable ARM bits */
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
+
+ fwSize = (pFwHeader->ImageSize + 3)/4;
+ ptrFw = (u32 *) pFwHeader;
+
+ /* Write the LoadStartAddress to the DiagRw Address Register
+ * using Programmed IO
+ */
+ if (ioc->errata_flag_1064)
+ pci_enable_io_access(ioc->pcidev);
+
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
+ ioc->name, pFwHeader->LoadStartAddress));
+
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
+ ioc->name, fwSize*4, ptrFw));
+ while (fwSize--) {
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
+ }
+
+ nextImage = pFwHeader->NextImageHeaderOffset;
+ while (nextImage) {
+ pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
+
+ load_addr = pExtImage->LoadStartAddress;
+
+ fwSize = (pExtImage->ImageSize + 3) >> 2;
+ ptrFw = (u32 *)pExtImage;
+
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
+ ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
+
+ while (fwSize--) {
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
+ }
+ nextImage = pExtImage->NextImageHeaderOffset;
+ }
+
+ /* Write the IopResetVectorRegAddr */
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
+
+ /* Write the IopResetVectorValue */
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
+
+ /* Clear the internal flash bad bit - autoincrementing register,
+ * so must do two writes.
+ */
+ if (ioc->bus_type == SPI) {
+ /*
+ * 1030 and 1035 H/W errata, workaround to access
+ * the ClearFlashBadSignatureBit
+ */
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
+ diagRwData |= 0x40000000;
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
+
+ } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
+ MPI_DIAG_CLEAR_FLASH_BAD_SIG);
+
+ /* wait 1 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (1);
+ } else {
+ mdelay (1);
+ }
+ }
+
+ if (ioc->errata_flag_1064)
+ pci_disable_io_access(ioc->pcidev);
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
+ "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
+ ioc->name, diag0val));
+ diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
+ ioc->name, diag0val));
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
+
+ /* Write 0xFF to reset the sequencer */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+
+ if (ioc->bus_type == SAS) {
+ ioc_state = mpt_GetIocState(ioc, 0);
+ if ( (GetIocFacts(ioc, sleepFlag,
+ MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
+ ioc->name, ioc_state));
+ return -EFAULT;
+ }
+ }
+
+ for (count=0; count<HZ*20; count++) {
+ if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "downloadboot successful! (count=%d) IocState=%x\n",
+ ioc->name, count, ioc_state));
+ if (ioc->bus_type == SAS) {
+ return 0;
+ }
+ if ((SendIocInit(ioc, sleepFlag)) != 0) {
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "downloadboot: SendIocInit failed\n",
+ ioc->name));
+ return -EFAULT;
+ }
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "downloadboot: SendIocInit successful\n",
+ ioc->name));
+ return 0;
+ }
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (10);
+ } else {
+ mdelay (10);
+ }
+ }
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
+ return -EFAULT;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * KickStart - Perform hard reset of MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @force: Force hard reset
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine places MPT adapter in diagnostic mode via the
+ * WriteSequence register, and then performs a hard reset of adapter
+ * via the Diagnostic register.
+ *
+ * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
+ * or NO_SLEEP (interrupt thread, use mdelay)
+ * force - 1 if doorbell active, board fault state
+ * board operational, IOC_RECOVERY or
+ * IOC_BRINGUP and there is an alt_ioc.
+ * 0 else
+ *
+ * Returns:
+ * 1 - hard reset, READY
+ * 0 - no reset due to History bit, READY
+ * -1 - no reset due to History bit but not READY
+ * OR reset but failed to come READY
+ * -2 - no reset, could not enter DIAG mode
+ * -3 - reset but bad FW bit
+ */
+static int
+KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
+{
+ int hard_reset_done = 0;
+ u32 ioc_state=0;
+ int cnt,cntdn;
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
+ if (ioc->bus_type == SPI) {
+ /* Always issue a Msg Unit Reset first. This will clear some
+ * SCSI bus hang conditions.
+ */
+ SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
+
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (1000);
+ } else {
+ mdelay (1000);
+ }
+ }
+
+ hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
+ if (hard_reset_done < 0)
+ return hard_reset_done;
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
+ ioc->name));
+
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
+ for (cnt=0; cnt<cntdn; cnt++) {
+ ioc_state = mpt_GetIocState(ioc, 1);
+ if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
+ ioc->name, cnt));
+ return hard_reset_done;
+ }
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (10);
+ } else {
+ mdelay (10);
+ }
+ }
+
+ dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
+ ioc->name, mpt_GetIocState(ioc, 0)));
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_diag_reset - Perform hard reset of the adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ignore: Set if to honor and clear to ignore
+ * the reset history bit
+ * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
+ * else set to NO_SLEEP (use mdelay instead)
+ *
+ * This routine places the adapter in diagnostic mode via the
+ * WriteSequence register and then performs a hard reset of adapter
+ * via the Diagnostic register. Adapter should be in ready state
+ * upon successful completion.
+ *
+ * Returns: 1 hard reset successful
+ * 0 no reset performed because reset history bit set
+ * -2 enabling diagnostic mode failed
+ * -3 diagnostic reset failed
+ */
+static int
+mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
+{
+ u32 diag0val;
+ u32 doorbell;
+ int hard_reset_done = 0;
+ int count = 0;
+ u32 diag1val = 0;
+ MpiFwHeader_t *cached_fw; /* Pointer to FW */
+ u8 cb_idx;
+
+ /* Clear any existing interrupts */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+
+ if (!ignore)
+ return 0;
+
+ drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
+ "address=%p\n", ioc->name, __func__,
+ &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
+ CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
+ if (sleepFlag == CAN_SLEEP)
+ msleep(1);
+ else
+ mdelay(1);
+
+ /*
+ * Call each currently registered protocol IOC reset handler
+ * with pre-reset indication.
+ * NOTE: If we're doing _IOC_BRINGUP, there can be no
+ * MptResetHandlers[] registered yet.
+ */
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx])
+ (*(MptResetHandlers[cb_idx]))(ioc,
+ MPT_IOC_PRE_RESET);
+ }
+
+ for (count = 0; count < 60; count ++) {
+ doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
+ doorbell &= MPI_IOC_STATE_MASK;
+
+ drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "looking for READY STATE: doorbell=%x"
+ " count=%d\n",
+ ioc->name, doorbell, count));
+
+ if (doorbell == MPI_IOC_STATE_READY) {
+ return 1;
+ }
+
+ /* wait 1 sec */
+ if (sleepFlag == CAN_SLEEP)
+ msleep(1000);
+ else
+ mdelay(1000);
+ }
+ return -1;
+ }
+
+ /* Use "Diagnostic reset" method! (only thing available!) */
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+
+ if (ioc->debug_level & MPT_DEBUG) {
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+ }
+
+ /* Do the reset if we are told to ignore the reset history
+ * or if the reset history is 0
+ */
+ if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
+ while ((diag0val & MPI_DIAG_DRWE) == 0) {
+ /* Write magic sequence to WriteSequence register
+ * Loop until in diagnostic mode
+ */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ /* wait 100 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (100);
+ } else {
+ mdelay (100);
+ }
+
+ count++;
+ if (count > 20) {
+ printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
+ ioc->name, diag0val);
+ return -2;
+
+ }
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
+ ioc->name, diag0val));
+ }
+
+ if (ioc->debug_level & MPT_DEBUG) {
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+ }
+ /*
+ * Disable the ARM (Bug fix)
+ *
+ */
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
+ mdelay(1);
+
+ /*
+ * Now hit the reset bit in the Diagnostic register
+ * (THE BIG HAMMER!) (Clears DRWE bit).
+ */
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
+ hard_reset_done = 1;
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
+ ioc->name));
+
+ /*
+ * Call each currently registered protocol IOC reset handler
+ * with pre-reset indication.
+ * NOTE: If we're doing _IOC_BRINGUP, there can be no
+ * MptResetHandlers[] registered yet.
+ */
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx]) {
+ mpt_signal_reset(cb_idx,
+ ioc, MPT_IOC_PRE_RESET);
+ if (ioc->alt_ioc) {
+ mpt_signal_reset(cb_idx,
+ ioc->alt_ioc, MPT_IOC_PRE_RESET);
+ }
+ }
+ }
+
+ if (ioc->cached_fw)
+ cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
+ else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
+ cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
+ else
+ cached_fw = NULL;
+ if (cached_fw) {
+ /* If the DownloadBoot operation fails, the
+ * IOC will be left unusable. This is a fatal error
+ * case. _diag_reset will return < 0
+ */
+ for (count = 0; count < 30; count ++) {
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
+ break;
+ }
+
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
+ ioc->name, diag0val, count));
+ /* wait 1 sec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (1000);
+ } else {
+ mdelay (1000);
+ }
+ }
+ if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
+ printk(MYIOC_s_WARN_FMT
+ "firmware downloadboot failure (%d)!\n", ioc->name, count);
+ }
+
+ } else {
+ /* Wait for FW to reload and for board
+ * to go to the READY state.
+ * Maximum wait is 60 seconds.
+ * If fail, no error will check again
+ * with calling program.
+ */
+ for (count = 0; count < 60; count ++) {
+ doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
+ doorbell &= MPI_IOC_STATE_MASK;
+
+ drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "looking for READY STATE: doorbell=%x"
+ " count=%d\n", ioc->name, doorbell, count));
+
+ if (doorbell == MPI_IOC_STATE_READY) {
+ break;
+ }
+
+ /* wait 1 sec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (1000);
+ } else {
+ mdelay (1000);
+ }
+ }
+
+ if (doorbell != MPI_IOC_STATE_READY)
+ printk(MYIOC_s_ERR_FMT "Failed to come READY "
+ "after reset! IocState=%x", ioc->name,
+ doorbell);
+ }
+ }
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (ioc->debug_level & MPT_DEBUG) {
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+ }
+
+ /* Clear RESET_HISTORY bit! Place board in the
+ * diagnostic mode to update the diag register.
+ */
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ count = 0;
+ while ((diag0val & MPI_DIAG_DRWE) == 0) {
+ /* Write magic sequence to WriteSequence register
+ * Loop until in diagnostic mode
+ */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ /* wait 100 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep (100);
+ } else {
+ mdelay (100);
+ }
+
+ count++;
+ if (count > 20) {
+ printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
+ ioc->name, diag0val);
+ break;
+ }
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ }
+ diag0val &= ~MPI_DIAG_RESET_HISTORY;
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (diag0val & MPI_DIAG_RESET_HISTORY) {
+ printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
+ ioc->name);
+ }
+
+ /* Disable Diagnostic Mode
+ */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
+
+ /* Check FW reload status flags.
+ */
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
+ printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
+ ioc->name, diag0val);
+ return -3;
+ }
+
+ if (ioc->debug_level & MPT_DEBUG) {
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+ }
+
+ /*
+ * Reset flag that says we've enabled event notification
+ */
+ ioc->facts.EventState = 0;
+
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->facts.EventState = 0;
+
+ return hard_reset_done;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * SendIocReset - Send IOCReset request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @reset_type: reset type, expected values are
+ * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Send IOCReset request to the MPT adapter.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
+{
+ int r;
+ u32 state;
+ int cntdn, count;
+
+ drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
+ ioc->name, reset_type));
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
+ return r;
+
+ /* FW ACK'd request, wait for READY state
+ */
+ count = 0;
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
+
+ while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
+ cntdn--;
+ count++;
+ if (!cntdn) {
+ if (sleepFlag != CAN_SLEEP)
+ count *= 10;
+
+ printk(MYIOC_s_ERR_FMT
+ "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+ ioc->name, state, (int)((count+5)/HZ));
+ return -ETIME;
+ }
+
+ if (sleepFlag == CAN_SLEEP) {
+ msleep(1);
+ } else {
+ mdelay (1); /* 1 msec delay */
+ }
+ }
+
+ /* TODO!
+ * Cleanup all event stuff for this IOC; re-issue EventNotification
+ * request if needed.
+ */
+ if (ioc->facts.Function)
+ ioc->facts.EventState = 0;
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * initChainBuffers - Allocate memory for and initialize chain buffers
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Allocates memory for and initializes chain buffers,
+ * chain buffer control arrays and spinlock.
+ */
+static int
+initChainBuffers(MPT_ADAPTER *ioc)
+{
+ u8 *mem;
+ int sz, ii, num_chain;
+ int scale, num_sge, numSGE;
+
+ /* ReqToChain size must equal the req_depth
+ * index = req_idx
+ */
+ if (ioc->ReqToChain == NULL) {
+ sz = ioc->req_depth * sizeof(int);
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -1;
+
+ ioc->ReqToChain = (int *) mem;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
+ ioc->name, mem, sz));
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -1;
+
+ ioc->RequestNB = (int *) mem;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
+ ioc->name, mem, sz));
+ }
+ for (ii = 0; ii < ioc->req_depth; ii++) {
+ ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
+ }
+
+ /* ChainToChain size must equal the total number
+ * of chain buffers to be allocated.
+ * index = chain_idx
+ *
+ * Calculate the number of chain buffers needed(plus 1) per I/O
+ * then multiply the maximum number of simultaneous cmds
+ *
+ * num_sge = num sge in request frame + last chain buffer
+ * scale = num sge per chain buffer if no chain element
+ */
+ scale = ioc->req_sz / ioc->SGE_size;
+ if (ioc->sg_addr_size == sizeof(u64))
+ num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
+ else
+ num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
+
+ if (ioc->sg_addr_size == sizeof(u64)) {
+ numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
+ (ioc->req_sz - 60) / ioc->SGE_size;
+ } else {
+ numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
+ scale + (ioc->req_sz - 64) / ioc->SGE_size;
+ }
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
+ ioc->name, num_sge, numSGE));
+
+ if (ioc->bus_type == FC) {
+ if (numSGE > MPT_SCSI_FC_SG_DEPTH)
+ numSGE = MPT_SCSI_FC_SG_DEPTH;
+ } else {
+ if (numSGE > MPT_SCSI_SG_DEPTH)
+ numSGE = MPT_SCSI_SG_DEPTH;
+ }
+
+ num_chain = 1;
+ while (numSGE - num_sge > 0) {
+ num_chain++;
+ num_sge += (scale - 1);
+ }
+ num_chain++;
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
+ ioc->name, numSGE, num_sge, num_chain));
+
+ if (ioc->bus_type == SPI)
+ num_chain *= MPT_SCSI_CAN_QUEUE;
+ else if (ioc->bus_type == SAS)
+ num_chain *= MPT_SAS_CAN_QUEUE;
+ else
+ num_chain *= MPT_FC_CAN_QUEUE;
+
+ ioc->num_chain = num_chain;
+
+ sz = num_chain * sizeof(int);
+ if (ioc->ChainToChain == NULL) {
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -1;
+
+ ioc->ChainToChain = (int *) mem;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
+ ioc->name, mem, sz));
+ } else {
+ mem = (u8 *) ioc->ChainToChain;
+ }
+ memset(mem, 0xFF, sz);
+ return num_chain;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * PrimeIocFifos - Initialize IOC request and reply FIFOs.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * This routine allocates memory for the MPT reply and request frame
+ * pools (if necessary), and primes the IOC reply FIFO with
+ * reply frames.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+PrimeIocFifos(MPT_ADAPTER *ioc)
+{
+ MPT_FRAME_HDR *mf;
+ unsigned long flags;
+ dma_addr_t alloc_dma;
+ u8 *mem;
+ int i, reply_sz, sz, total_size, num_chain;
+ u64 dma_mask;
+
+ dma_mask = 0;
+
+ /* Prime reply FIFO... */
+
+ if (ioc->reply_frames == NULL) {
+ if ( (num_chain = initChainBuffers(ioc)) < 0)
+ return -1;
+ /*
+ * 1078 errata workaround for the 36GB limitation
+ */
+ if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
+ ioc->dma_mask > DMA_BIT_MASK(35)) {
+ if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(32))) {
+ dma_mask = DMA_BIT_MASK(35);
+ d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "setting 35 bit addressing for "
+ "Request/Reply/Chain and Sense Buffers\n",
+ ioc->name));
+ } else {
+ /*Reseting DMA mask to 64 bit*/
+ pci_set_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64));
+ pci_set_consistent_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64));
+
+ printk(MYIOC_s_ERR_FMT
+ "failed setting 35 bit addressing for "
+ "Request/Reply/Chain and Sense Buffers\n",
+ ioc->name);
+ return -1;
+ }
+ }
+
+ total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
+ ioc->name, ioc->reply_sz, ioc->reply_depth));
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
+ ioc->name, reply_sz, reply_sz));
+
+ sz = (ioc->req_sz * ioc->req_depth);
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
+ ioc->name, ioc->req_sz, ioc->req_depth));
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
+ ioc->name, sz, sz));
+ total_size += sz;
+
+ sz = num_chain * ioc->req_sz; /* chain buffer pool size */
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
+ ioc->name, ioc->req_sz, num_chain));
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
+ ioc->name, sz, sz, num_chain));
+
+ total_size += sz;
+ mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
+ if (mem == NULL) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
+ ioc->name);
+ goto out_fail;
+ }
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
+
+ memset(mem, 0, total_size);
+ ioc->alloc_total += total_size;
+ ioc->alloc = mem;
+ ioc->alloc_dma = alloc_dma;
+ ioc->alloc_sz = total_size;
+ ioc->reply_frames = (MPT_FRAME_HDR *) mem;
+ ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
+ ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
+
+ alloc_dma += reply_sz;
+ mem += reply_sz;
+
+ /* Request FIFO - WE manage this! */
+
+ ioc->req_frames = (MPT_FRAME_HDR *) mem;
+ ioc->req_frames_dma = alloc_dma;
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
+ ioc->name, mem, (void *)(ulong)alloc_dma));
+
+ ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
+
+#if defined(CONFIG_MTRR) && 0
+ /*
+ * Enable Write Combining MTRR for IOC's memory region.
+ * (at least as much as we can; "size and base must be
+ * multiples of 4 kiB"
+ */
+ ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma,
+ sz,
+ MTRR_TYPE_WRCOMB, 1);
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MTRR region registered (base:size=%08x:%x)\n",
+ ioc->name, ioc->req_frames_dma, sz));
+#endif
+
+ for (i = 0; i < ioc->req_depth; i++) {
+ alloc_dma += ioc->req_sz;
+ mem += ioc->req_sz;
+ }
+
+ ioc->ChainBuffer = mem;
+ ioc->ChainBufferDMA = alloc_dma;
+
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
+ ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
+
+ /* Initialize the free chain Q.
+ */
+
+ INIT_LIST_HEAD(&ioc->FreeChainQ);
+
+ /* Post the chain buffers to the FreeChainQ.
+ */
+ mem = (u8 *)ioc->ChainBuffer;
+ for (i=0; i < num_chain; i++) {
+ mf = (MPT_FRAME_HDR *) mem;
+ list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
+ mem += ioc->req_sz;
+ }
+
+ /* Initialize Request frames linked list
+ */
+ alloc_dma = ioc->req_frames_dma;
+ mem = (u8 *) ioc->req_frames;
+
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ INIT_LIST_HEAD(&ioc->FreeQ);
+ for (i = 0; i < ioc->req_depth; i++) {
+ mf = (MPT_FRAME_HDR *) mem;
+
+ /* Queue REQUESTs *internally*! */
+ list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
+
+ mem += ioc->req_sz;
+ }
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+ sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
+ ioc->sense_buf_pool =
+ pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
+ if (ioc->sense_buf_pool == NULL) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
+ ioc->name);
+ goto out_fail;
+ }
+
+ ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
+ ioc->alloc_total += sz;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
+ ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
+
+ }
+
+ /* Post Reply frames to FIFO
+ */
+ alloc_dma = ioc->alloc_dma;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
+ ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
+
+ for (i = 0; i < ioc->reply_depth; i++) {
+ /* Write each address to the IOC! */
+ CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
+ alloc_dma += ioc->reply_sz;
+ }
+
+ if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
+ ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
+ ioc->dma_mask))
+ d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "restoring 64 bit addressing\n", ioc->name));
+
+ return 0;
+
+out_fail:
+
+ if (ioc->alloc != NULL) {
+ sz = ioc->alloc_sz;
+ pci_free_consistent(ioc->pcidev,
+ sz,
+ ioc->alloc, ioc->alloc_dma);
+ ioc->reply_frames = NULL;
+ ioc->req_frames = NULL;
+ ioc->alloc_total -= sz;
+ }
+ if (ioc->sense_buf_pool != NULL) {
+ sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
+ pci_free_consistent(ioc->pcidev,
+ sz,
+ ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
+ ioc->sense_buf_pool = NULL;
+ }
+
+ if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64)))
+ d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "restoring 64 bit addressing\n", ioc->name));
+
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
+ * from IOC via doorbell handshake method.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @reqBytes: Size of the request in bytes
+ * @req: Pointer to MPT request frame
+ * @replyBytes: Expected size of the reply in bytes
+ * @u16reply: Pointer to area where reply should be written
+ * @maxwait: Max wait time for a reply (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * NOTES: It is the callers responsibility to byte-swap fields in the
+ * request which are greater than 1 byte in size. It is also the
+ * callers responsibility to byte-swap response fields which are
+ * greater than 1 byte in size.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
+ int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
+{
+ MPIDefaultReply_t *mptReply;
+ int failcnt = 0;
+ int t;
+
+ /*
+ * Get ready to cache a handshake reply
+ */
+ ioc->hs_reply_idx = 0;
+ mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
+ mptReply->MsgLength = 0;
+
+ /*
+ * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
+ * then tell IOC that we want to handshake a request of N words.
+ * (WRITE u32val to Doorbell reg).
+ */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ CHIPREG_WRITE32(&ioc->chip->Doorbell,
+ ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
+ ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
+
+ /*
+ * Wait for IOC's doorbell handshake int
+ */
+ if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
+ ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
+
+ /* Read doorbell and check for active bit */
+ if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
+ return -1;
+
+ /*
+ * Clear doorbell int (WRITE 0 to IntStatus reg),
+ * then wait for IOC to ACKnowledge that it's ready for
+ * our handshake request.
+ */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+
+ if (!failcnt) {
+ int ii;
+ u8 *req_as_bytes = (u8 *) req;
+
+ /*
+ * Stuff request words via doorbell handshake,
+ * with ACK from IOC for each.
+ */
+ for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
+ u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
+ (req_as_bytes[(ii*4) + 1] << 8) |
+ (req_as_bytes[(ii*4) + 2] << 16) |
+ (req_as_bytes[(ii*4) + 3] << 24));
+
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
+ if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ }
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
+ DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
+ ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
+
+ /*
+ * Wait for completion of doorbell handshake reply from the IOC
+ */
+ if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
+ failcnt++;
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
+ ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
+
+ /*
+ * Copy out the cached reply...
+ */
+ for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
+ u16reply[ii] = ioc->hs_reply[ii];
+ } else {
+ return -99;
+ }
+
+ return -failcnt;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @howlong: How long to wait (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine waits (up to ~2 seconds max) for IOC doorbell
+ * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
+ * bit in its IntStatus register being clear.
+ *
+ * Returns a negative value on failure, else wait loop count.
+ */
+static int
+WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
+{
+ int cntdn;
+ int count = 0;
+ u32 intstat=0;
+
+ cntdn = 1000 * howlong;
+
+ if (sleepFlag == CAN_SLEEP) {
+ while (--cntdn) {
+ msleep (1);
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
+ break;
+ count++;
+ }
+ } else {
+ while (--cntdn) {
+ udelay (1000);
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
+ break;
+ count++;
+ }
+ }
+
+ if (cntdn) {
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
+ ioc->name, count));
+ return count;
+ }
+
+ printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
+ ioc->name, count, intstat);
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @howlong: How long to wait (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
+ * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
+ *
+ * Returns a negative value on failure, else wait loop count.
+ */
+static int
+WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
+{
+ int cntdn;
+ int count = 0;
+ u32 intstat=0;
+
+ cntdn = 1000 * howlong;
+ if (sleepFlag == CAN_SLEEP) {
+ while (--cntdn) {
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
+ break;
+ msleep(1);
+ count++;
+ }
+ } else {
+ while (--cntdn) {
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
+ break;
+ udelay (1000);
+ count++;
+ }
+ }
+
+ if (cntdn) {
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
+ ioc->name, count, howlong));
+ return count;
+ }
+
+ printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
+ ioc->name, count, intstat);
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @howlong: How long to wait (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine polls the IOC for a handshake reply, 16 bits at a time.
+ * Reply is cached to IOC private area large enough to hold a maximum
+ * of 128 bytes of reply data.
+ *
+ * Returns a negative value on failure, else size of reply in WORDS.
+ */
+static int
+WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
+{
+ int u16cnt = 0;
+ int failcnt = 0;
+ int t;
+ u16 *hs_reply = ioc->hs_reply;
+ volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
+ u16 hword;
+
+ hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
+
+ /*
+ * Get first two u16's so we can look at IOC's intended reply MsgLength
+ */
+ u16cnt=0;
+ if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
+ failcnt++;
+ } else {
+ hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ else {
+ hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ }
+ }
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
+ ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
+ failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
+
+ /*
+ * If no error (and IOC said MsgLength is > 0), piece together
+ * reply 16 bits at a time.
+ */
+ for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
+ if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
+ /* don't overflow our IOC hs_reply[] buffer! */
+ if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
+ hs_reply[u16cnt] = hword;
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ }
+
+ if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ if (failcnt) {
+ printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
+ ioc->name);
+ return -failcnt;
+ }
+#if 0
+ else if (u16cnt != (2 * mptReply->MsgLength)) {
+ return -101;
+ }
+ else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
+ return -102;
+ }
+#endif
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
+ DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
+
+ dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
+ ioc->name, t, u16cnt/2));
+ return u16cnt/2;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * GetLanConfigPages - Fetch LANConfig pages.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Return: 0 for success
+ * -ENOMEM if no memory available
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+static int
+GetLanConfigPages(MPT_ADAPTER *ioc)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ LANPage0_t *ppage0_alloc;
+ dma_addr_t page0_dma;
+ LANPage1_t *ppage1_alloc;
+ dma_addr_t page1_dma;
+ int rc = 0;
+ int data_sz;
+ int copy_sz;
+
+ /* Get LAN Page 0 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = 0;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength > 0) {
+ data_sz = hdr.PageLength * 4;
+ ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
+ rc = -ENOMEM;
+ if (ppage0_alloc) {
+ memset((u8 *)ppage0_alloc, 0, data_sz);
+ cfg.physAddr = page0_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ /* save the data */
+ copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
+ memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
+
+ }
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
+
+ /* FIXME!
+ * Normalize endianness of structure data,
+ * by byte-swapping all > 1 byte fields!
+ */
+
+ }
+
+ if (rc)
+ return rc;
+ }
+
+ /* Get LAN Page 1 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 1;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return 0;
+
+ data_sz = hdr.PageLength * 4;
+ rc = -ENOMEM;
+ ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
+ if (ppage1_alloc) {
+ memset((u8 *)ppage1_alloc, 0, data_sz);
+ cfg.physAddr = page1_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ /* save the data */
+ copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
+ memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
+ }
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
+
+ /* FIXME!
+ * Normalize endianness of structure data,
+ * by byte-swapping all > 1 byte fields!
+ */
+
+ }
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @persist_opcode: see below
+ *
+ * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
+ * devices not currently present.
+ * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
+ *
+ * NOTE: Don't use not this function during interrupt time.
+ *
+ * Returns 0 for success, non-zero error
+ */
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+int
+mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
+{
+ SasIoUnitControlRequest_t *sasIoUnitCntrReq;
+ SasIoUnitControlReply_t *sasIoUnitCntrReply;
+ MPT_FRAME_HDR *mf = NULL;
+ MPIHeader_t *mpi_hdr;
+ int ret = 0;
+ unsigned long timeleft;
+
+ mutex_lock(&ioc->mptbase_cmds.mutex);
+
+ /* init the internal cmd struct */
+ memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+ INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
+
+ /* insure garbage is not sent to fw */
+ switch(persist_opcode) {
+
+ case MPI_SAS_OP_CLEAR_NOT_PRESENT:
+ case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
+ break;
+
+ default:
+ ret = -1;
+ goto out;
+ }
+
+ printk(KERN_DEBUG "%s: persist_opcode=%x\n",
+ __func__, persist_opcode);
+
+ /* Get a MF for this command.
+ */
+ if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
+ ret = -1;
+ goto out;
+ }
+
+ mpi_hdr = (MPIHeader_t *) mf;
+ sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
+ memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
+ sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
+ sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
+ sasIoUnitCntrReq->Operation = persist_opcode;
+
+ mpt_put_msg_frame(mpt_base_index, ioc, mf);
+ timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ printk(KERN_DEBUG "%s: failed\n", __func__);
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ if (!timeleft) {
+ printk(MYIOC_s_WARN_FMT
+ "Issuing Reset from %s!!, doorbell=0x%08x\n",
+ ioc->name, __func__, mpt_GetIocState(ioc, 0));
+ mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ }
+ goto out;
+ }
+
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ ret = -1;
+ goto out;
+ }
+
+ sasIoUnitCntrReply =
+ (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
+ if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
+ printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+ __func__, sasIoUnitCntrReply->IOCStatus,
+ sasIoUnitCntrReply->IOCLogInfo);
+ printk(KERN_DEBUG "%s: failed\n", __func__);
+ ret = -1;
+ } else
+ printk(KERN_DEBUG "%s: success\n", __func__);
+ out:
+
+ CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+ mutex_unlock(&ioc->mptbase_cmds.mutex);
+ return ret;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+static void
+mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
+ MpiEventDataRaid_t * pRaidEventData)
+{
+ int volume;
+ int reason;
+ int disk;
+ int status;
+ int flags;
+ int state;
+
+ volume = pRaidEventData->VolumeID;
+ reason = pRaidEventData->ReasonCode;
+ disk = pRaidEventData->PhysDiskNum;
+ status = le32_to_cpu(pRaidEventData->SettingsStatus);
+ flags = (status >> 0) & 0xff;
+ state = (status >> 8) & 0xff;
+
+ if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
+ return;
+ }
+
+ if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
+ reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
+ (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
+ ioc->name, disk, volume);
+ } else {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
+ ioc->name, volume);
+ }
+
+ switch(reason) {
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED:
+ printk(MYIOC_s_INFO_FMT " volume has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED:
+
+ printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
+ ioc->name,
+ state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
+ ? "optimal"
+ : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
+ ? "degraded"
+ : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
+ ? "failed"
+ : "state unknown",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
+ ? ", enabled" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
+ ? ", resync in progress" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
+ ioc->name,
+ state == MPI_PHYSDISK0_STATUS_ONLINE
+ ? "online"
+ : state == MPI_PHYSDISK0_STATUS_MISSING
+ ? "missing"
+ : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
+ ? "not compatible"
+ : state == MPI_PHYSDISK0_STATUS_FAILED
+ ? "failed"
+ : state == MPI_PHYSDISK0_STATUS_INITIALIZING
+ ? "initializing"
+ : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
+ ? "offline requested"
+ : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
+ ? "failed requested"
+ : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
+ ? "offline"
+ : "state unknown",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
+ ? ", out of sync" : "",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
+ printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_SMART_DATA:
+ printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
+ ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
+ break;
+
+ case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
+ printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
+ ioc->name, disk);
+ break;
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Returns: 0 for success
+ * -ENOMEM if no memory available
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+static int
+GetIoUnitPage2(MPT_ADAPTER *ioc)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ IOUnitPage2_t *ppage_alloc;
+ dma_addr_t page_dma;
+ int data_sz;
+ int rc;
+
+ /* Get the page header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 2;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = 0;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return 0;
+
+ /* Read the config page */
+ data_sz = hdr.PageLength * 4;
+ rc = -ENOMEM;
+ ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
+ if (ppage_alloc) {
+ memset((u8 *)ppage_alloc, 0, data_sz);
+ cfg.physAddr = page_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ /* If Good, save data */
+ if ((rc = mpt_config(ioc, &cfg)) == 0)
+ ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
+ }
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
+ * @ioc: Pointer to a Adapter Strucutre
+ * @portnum: IOC port number
+ *
+ * Return: -EFAULT if read of config page header fails
+ * or if no nvram
+ * If read of SCSI Port Page 0 fails,
+ * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
+ * Adapter settings: async, narrow
+ * Return 1
+ * If read of SCSI Port Page 2 fails,
+ * Adapter settings valid
+ * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
+ * Return 1
+ * Else
+ * Both valid
+ * Return 0
+ * CHECK - what type of locking mechanisms should be used????
+ */
+static int
+mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
+{
+ u8 *pbuf;
+ dma_addr_t buf_dma;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ int ii;
+ int data, rc = 0;
+
+ /* Allocate memory
+ */
+ if (!ioc->spi_data.nvram) {
+ int sz;
+ u8 *mem;
+ sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -EFAULT;
+
+ ioc->spi_data.nvram = (int *) mem;
+
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
+ ioc->name, ioc->spi_data.nvram, sz));
+ }
+
+ /* Invalidate NVRAM information
+ */
+ for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
+ ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
+ }
+
+ /* Read SPP0 header, allocate memory, then read page.
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 0;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
+ cfg.cfghdr.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = portnum;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0; /* use default */
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ if (header.PageLength > 0) {
+ pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
+ if (pbuf) {
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.physAddr = buf_dma;
+ if (mpt_config(ioc, &cfg) != 0) {
+ ioc->spi_data.maxBusWidth = MPT_NARROW;
+ ioc->spi_data.maxSyncOffset = 0;
+ ioc->spi_data.minSyncFactor = MPT_ASYNC;
+ ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
+ rc = 1;
+ ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Unable to read PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
+ } else {
+ /* Save the Port Page 0 data
+ */
+ SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
+ pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
+ pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
+
+ if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
+ ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
+ ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "noQas due to Capabilities=%x\n",
+ ioc->name, pPP0->Capabilities));
+ }
+ ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
+ data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
+ if (data) {
+ ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
+ data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
+ ioc->spi_data.minSyncFactor = (u8) (data >> 8);
+ ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
+ } else {
+ ioc->spi_data.maxSyncOffset = 0;
+ ioc->spi_data.minSyncFactor = MPT_ASYNC;
+ }
+
+ ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
+
+ /* Update the minSyncFactor based on bus type.
+ */
+ if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
+ (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
+
+ if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
+ ioc->spi_data.minSyncFactor = MPT_ULTRA;
+ ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "HVD or SE detected, minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
+ }
+ }
+ }
+ if (pbuf) {
+ pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
+ }
+ }
+ }
+
+ /* SCSI Port Page 2 - Read the header then the page.
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 2;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
+ cfg.cfghdr.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = portnum;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ if (header.PageLength > 0) {
+ /* Allocate memory and read SCSI Port Page 2
+ */
+ pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
+ if (pbuf) {
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
+ cfg.physAddr = buf_dma;
+ if (mpt_config(ioc, &cfg) != 0) {
+ /* Nvram data is left with INVALID mark
+ */
+ rc = 1;
+ } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
+
+ /* This is an ATTO adapter, read Page2 accordingly
+ */
+ ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
+ ATTODeviceInfo_t *pdevice = NULL;
+ u16 ATTOFlags;
+
+ /* Save the Port Page 2 data
+ * (reformat into a 32bit quantity)
+ */
+ for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
+ pdevice = &pPP2->DeviceSettings[ii];
+ ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
+ data = 0;
+
+ /* Translate ATTO device flags to LSI format
+ */
+ if (ATTOFlags & ATTOFLAG_DISC)
+ data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
+ if (ATTOFlags & ATTOFLAG_ID_ENB)
+ data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
+ if (ATTOFlags & ATTOFLAG_LUN_ENB)
+ data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
+ if (ATTOFlags & ATTOFLAG_TAGGED)
+ data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
+ if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
+ data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
+
+ data = (data << 16) | (pdevice->Period << 8) | 10;
+ ioc->spi_data.nvram[ii] = data;
+ }
+ } else {
+ SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
+ MpiDeviceInfo_t *pdevice = NULL;
+
+ /*
+ * Save "Set to Avoid SCSI Bus Resets" flag
+ */
+ ioc->spi_data.bus_reset =
+ (le32_to_cpu(pPP2->PortFlags) &
+ MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
+ 0 : 1 ;
+
+ /* Save the Port Page 2 data
+ * (reformat into a 32bit quantity)
+ */
+ data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
+ ioc->spi_data.PortFlags = data;
+ for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
+ pdevice = &pPP2->DeviceSettings[ii];
+ data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
+ (pdevice->SyncFactor << 8) | pdevice->Timeout;
+ ioc->spi_data.nvram[ii] = data;
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
+ }
+ }
+
+ /* Update Adapter limits with those from NVRAM
+ * Comment: Don't need to do this. Target performance
+ * parameters will never exceed the adapters limits.
+ */
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_readScsiDevicePageHeaders - save version and length of SDP1
+ * @ioc: Pointer to a Adapter Strucutre
+ * @portnum: IOC port number
+ *
+ * Return: -EFAULT if read of config page header fails
+ * or 0 if success.
+ */
+static int
+mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+
+ /* Read the SCSI Device Page 1 header
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 1;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
+ cfg.cfghdr.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = portnum;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
+ ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
+
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 0;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
+ ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
+
+ dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
+ ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
+
+ dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
+ ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
+ return 0;
+}
+
+/**
+ * mpt_inactive_raid_list_free - This clears this link list.
+ * @ioc : pointer to per adapter structure
+ **/
+static void
+mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
+{
+ struct inactive_raid_component_info *component_info, *pNext;
+
+ if (list_empty(&ioc->raid_data.inactive_list))
+ return;
+
+ mutex_lock(&ioc->raid_data.inactive_list_mutex);
+ list_for_each_entry_safe(component_info, pNext,
+ &ioc->raid_data.inactive_list, list) {
+ list_del(&component_info->list);
+ kfree(component_info);
+ }
+ mutex_unlock(&ioc->raid_data.inactive_list_mutex);
+}
+
+/**
+ * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
+ *
+ * @ioc : pointer to per adapter structure
+ * @channel : volume channel
+ * @id : volume target id
+ **/
+static void
+mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidVolumePage0_t buffer = NULL;
+ int i;
+ RaidPhysDiskPage0_t phys_disk;
+ struct inactive_raid_component_info *component_info;
+ int handle_inactive_volumes;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+ cfg.pageAddr = (channel << 8) + id;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!hdr.PageLength)
+ goto out;
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer)
+ goto out;
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!buffer->NumPhysDisks)
+ goto out;
+
+ handle_inactive_volumes =
+ (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
+ (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
+ buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
+ buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
+
+ if (!handle_inactive_volumes)
+ goto out;
+
+ mutex_lock(&ioc->raid_data.inactive_list_mutex);
+ for (i = 0; i < buffer->NumPhysDisks; i++) {
+ if(mpt_raid_phys_disk_pg0(ioc,
+ buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+ continue;
+
+ if ((component_info = kmalloc(sizeof (*component_info),
+ GFP_KERNEL)) == NULL)
+ continue;
+
+ component_info->volumeID = id;
+ component_info->volumeBus = channel;
+ component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
+ component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
+ component_info->d.PhysDiskID = phys_disk.PhysDiskID;
+ component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
+
+ list_add_tail(&component_info->list,
+ &ioc->raid_data.inactive_list);
+ }
+ mutex_unlock(&ioc->raid_data.inactive_list_mutex);
+
+ out:
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+}
+
+/**
+ * mpt_raid_phys_disk_pg0 - returns phys disk page zero
+ * @ioc: Pointer to a Adapter Structure
+ * @phys_disk_num: io unit unique phys disk num generated by the ioc
+ * @phys_disk: requested payload data returned
+ *
+ * Return:
+ * 0 on success
+ * -EFAULT if read of config page header fails or data pointer not NULL
+ * -ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
+ RaidPhysDiskPage0_t *phys_disk)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidPhysDiskPage0_t buffer = NULL;
+ int rc;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
+
+ hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ if (!hdr.PageLength) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.pageAddr = phys_disk_num;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ rc = 0;
+ memcpy(phys_disk, buffer, sizeof(*buffer));
+ phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
+
+ out:
+
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+
+ return rc;
+}
+
+/**
+ * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
+ * @ioc: Pointer to a Adapter Structure
+ * @phys_disk_num: io unit unique phys disk num generated by the ioc
+ *
+ * Return:
+ * returns number paths
+ **/
+int
+mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidPhysDiskPage1_t buffer = NULL;
+ int rc;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+ hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+ hdr.PageNumber = 1;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = 0;
+ goto out;
+ }
+
+ if (!hdr.PageLength) {
+ rc = 0;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer) {
+ rc = 0;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.pageAddr = phys_disk_num;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = 0;
+ goto out;
+ }
+
+ rc = buffer->NumPhysDiskPaths;
+ out:
+
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+
+ return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
+
+/**
+ * mpt_raid_phys_disk_pg1 - returns phys disk page 1
+ * @ioc: Pointer to a Adapter Structure
+ * @phys_disk_num: io unit unique phys disk num generated by the ioc
+ * @phys_disk: requested payload data returned
+ *
+ * Return:
+ * 0 on success
+ * -EFAULT if read of config page header fails or data pointer not NULL
+ * -ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+ RaidPhysDiskPage1_t *phys_disk)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidPhysDiskPage1_t buffer = NULL;
+ int rc;
+ int i;
+ __le64 sas_address;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ rc = 0;
+
+ hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+ hdr.PageNumber = 1;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ if (!hdr.PageLength) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.pageAddr = phys_disk_num;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
+ phys_disk->PhysDiskNum = phys_disk_num;
+ for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
+ phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
+ phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
+ phys_disk->Path[i].OwnerIdentifier =
+ buffer->Path[i].OwnerIdentifier;
+ phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
+ memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
+ sas_address = le64_to_cpu(sas_address);
+ memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
+ memcpy(&sas_address,
+ &buffer->Path[i].OwnerWWID, sizeof(__le64));
+ sas_address = le64_to_cpu(sas_address);
+ memcpy(&phys_disk->Path[i].OwnerWWID,
+ &sas_address, sizeof(__le64));
+ }
+
+ out:
+
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+
+ return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
+
+
+/**
+ * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
+ * @ioc: Pointer to a Adapter Strucutre
+ *
+ * Return:
+ * 0 on success
+ * -EFAULT if read of config page header fails or data pointer not NULL
+ * -ENOMEM if pci_alloc failed
+ **/
+int
+mpt_findImVolumes(MPT_ADAPTER *ioc)
+{
+ IOCPage2_t *pIoc2;
+ u8 *mem;
+ dma_addr_t ioc2_dma;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ int rc = 0;
+ int iocpage2sz;
+ int i;
+
+ if (!ioc->ir_firmware)
+ return 0;
+
+ /* Free the old page
+ */
+ kfree(ioc->raid_data.pIocPg2);
+ ioc->raid_data.pIocPg2 = NULL;
+ mpt_inactive_raid_list_free(ioc);
+
+ /* Read IOCP2 header then the page.
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 2;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.cfghdr.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ if (header.PageLength == 0)
+ return -EFAULT;
+
+ iocpage2sz = header.PageLength * 4;
+ pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
+ if (!pIoc2)
+ return -ENOMEM;
+
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.physAddr = ioc2_dma;
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ mem = kmalloc(iocpage2sz, GFP_KERNEL);
+ if (!mem) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(mem, (u8 *)pIoc2, iocpage2sz);
+ ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
+
+ mpt_read_ioc_pg_3(ioc);
+
+ for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
+ mpt_inactive_raid_volumes(ioc,
+ pIoc2->RaidVolume[i].VolumeBus,
+ pIoc2->RaidVolume[i].VolumeID);
+
+ out:
+ pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
+
+ return rc;
+}
+
+static int
+mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
+{
+ IOCPage3_t *pIoc3;
+ u8 *mem;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ dma_addr_t ioc3_dma;
+ int iocpage3sz = 0;
+
+ /* Free the old page
+ */
+ kfree(ioc->raid_data.pIocPg3);
+ ioc->raid_data.pIocPg3 = NULL;
+
+ /* There is at least one physical disk.
+ * Read and save IOC Page 3
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 3;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.cfghdr.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return 0;
+
+ if (header.PageLength == 0)
+ return 0;
+
+ /* Read Header good, alloc memory
+ */
+ iocpage3sz = header.PageLength * 4;
+ pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
+ if (!pIoc3)
+ return 0;
+
+ /* Read the Page and save the data
+ * into malloc'd memory.
+ */
+ cfg.physAddr = ioc3_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+ mem = kmalloc(iocpage3sz, GFP_KERNEL);
+ if (mem) {
+ memcpy(mem, (u8 *)pIoc3, iocpage3sz);
+ ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
+
+ return 0;
+}
+
+static void
+mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
+{
+ IOCPage4_t *pIoc4;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ dma_addr_t ioc4_dma;
+ int iocpage4sz;
+
+ /* Read and save IOC Page 4
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 4;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.cfghdr.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return;
+
+ if (header.PageLength == 0)
+ return;
+
+ if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
+ iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
+ pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
+ if (!pIoc4)
+ return;
+ ioc->alloc_total += iocpage4sz;
+ } else {
+ ioc4_dma = ioc->spi_data.IocPg4_dma;
+ iocpage4sz = ioc->spi_data.IocPg4Sz;
+ }
+
+ /* Read the Page into dma memory.
+ */
+ cfg.physAddr = ioc4_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+ ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
+ ioc->spi_data.IocPg4_dma = ioc4_dma;
+ ioc->spi_data.IocPg4Sz = iocpage4sz;
+ } else {
+ pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
+ ioc->spi_data.pIocPg4 = NULL;
+ ioc->alloc_total -= iocpage4sz;
+ }
+}
+
+static void
+mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
+{
+ IOCPage1_t *pIoc1;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ dma_addr_t ioc1_dma;
+ int iocpage1sz = 0;
+ u32 tmp;
+
+ /* Check the Coalescing Timeout in IOC Page 1
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 1;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.cfghdr.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return;
+
+ if (header.PageLength == 0)
+ return;
+
+ /* Read Header good, alloc memory
+ */
+ iocpage1sz = header.PageLength * 4;
+ pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
+ if (!pIoc1)
+ return;
+
+ /* Read the Page and check coalescing timeout
+ */
+ cfg.physAddr = ioc1_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+
+ tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
+ if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
+ tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
+
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
+ ioc->name, tmp));
+
+ if (tmp > MPT_COALESCING_TIMEOUT) {
+ pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
+
+ /* Write NVRAM and current
+ */
+ cfg.dir = 1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
+ ioc->name, MPT_COALESCING_TIMEOUT));
+
+ cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+ if (mpt_config(ioc, &cfg) == 0) {
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Reset NVRAM Coalescing Timeout to = %d\n",
+ ioc->name, MPT_COALESCING_TIMEOUT));
+ } else {
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Reset NVRAM Coalescing Timeout Failed\n",
+ ioc->name));
+ }
+
+ } else {
+ dprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "Reset of Current Coalescing Timeout Failed!\n",
+ ioc->name));
+ }
+ }
+
+ } else {
+ dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
+
+ return;
+}
+
+static void
+mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t buf_dma;
+ ManufacturingPage0_t *pbuf = NULL;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+ hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.timeout = 10;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!cfg.cfghdr.hdr->PageLength)
+ goto out;
+
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
+ if (!pbuf)
+ goto out;
+
+ cfg.physAddr = buf_dma;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
+ memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
+ memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
+
+ out:
+
+ if (pbuf)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * SendEventNotification - Send EventNotification (on or off) request to adapter
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @EvSwitch: Event switch flags
+ * @sleepFlag: Specifies whether the process can sleep
+ */
+static int
+SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
+{
+ EventNotification_t evn;
+ MPIDefaultReply_t reply_buf;
+
+ memset(&evn, 0, sizeof(EventNotification_t));
+ memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
+
+ evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
+ evn.Switch = EvSwitch;
+ evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
+
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Sending EventNotification (%d) request %p\n",
+ ioc->name, EvSwitch, &evn));
+
+ return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
+ (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
+ sleepFlag);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * SendEventAck - Send EventAck request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @evnp: Pointer to original EventNotification request
+ */
+static int
+SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
+{
+ EventAck_t *pAck;
+
+ if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
+ ioc->name, __func__));
+ return -1;
+ }
+
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
+
+ pAck->Function = MPI_FUNCTION_EVENT_ACK;
+ pAck->ChainOffset = 0;
+ pAck->Reserved[0] = pAck->Reserved[1] = 0;
+ pAck->MsgFlags = 0;
+ pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
+ pAck->Event = evnp->Event;
+ pAck->EventContext = evnp->EventContext;
+
+ mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_config - Generic function to issue config message
+ * @ioc: Pointer to an adapter structure
+ * @pCfg: Pointer to a configuration structure. Struct contains
+ * action, page address, direction, physical address
+ * and pointer to a configuration page header
+ * Page header is updated.
+ *
+ * Returns 0 for success
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+int
+mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
+{
+ Config_t *pReq;
+ ConfigReply_t *pReply;
+ ConfigExtendedPageHeader_t *pExtHdr = NULL;
+ MPT_FRAME_HDR *mf;
+ int ii;
+ int flagsLength;
+ long timeout;
+ int ret;
+ u8 page_type = 0, extend_page;
+ unsigned long timeleft;
+ unsigned long flags;
+ int in_isr;
+ u8 issue_hard_reset = 0;
+ u8 retry_count = 0;
+
+ /* Prevent calling wait_event() (below), if caller happens
+ * to be in ISR context, because that is fatal!
+ */
+ in_isr = in_interrupt();
+ if (in_isr) {
+ dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
+ ioc->name));
+ return -EPERM;
+ }
+
+ /* don't send a config page during diag reset */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: busy with host reset\n", ioc->name, __func__));
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return -EBUSY;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ /* don't send if no chance of success */
+ if (!ioc->active ||
+ mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: ioc not operational, %d, %xh\n",
+ ioc->name, __func__, ioc->active,
+ mpt_GetIocState(ioc, 0)));
+ return -EFAULT;
+ }
+
+ retry_config:
+ mutex_lock(&ioc->mptbase_cmds.mutex);
+ /* init the internal cmd struct */
+ memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+ INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
+
+ /* Get and Populate a free Frame
+ */
+ if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ dcprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "mpt_config: no msg frames!\n", ioc->name));
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ pReq = (Config_t *)mf;
+ pReq->Action = pCfg->action;
+ pReq->Reserved = 0;
+ pReq->ChainOffset = 0;
+ pReq->Function = MPI_FUNCTION_CONFIG;
+
+ /* Assume page type is not extended and clear "reserved" fields. */
+ pReq->ExtPageLength = 0;
+ pReq->ExtPageType = 0;
+ pReq->MsgFlags = 0;
+
+ for (ii=0; ii < 8; ii++)
+ pReq->Reserved2[ii] = 0;
+
+ pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
+ pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
+ pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
+ pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+
+ if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+ pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
+ pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
+ pReq->ExtPageType = pExtHdr->ExtPageType;
+ pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+
+ /* Page Length must be treated as a reserved field for the
+ * extended header.
+ */
+ pReq->Header.PageLength = 0;
+ }
+
+ pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
+
+ /* Add a SGE to the config request.
+ */
+ if (pCfg->dir)
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
+ else
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
+
+ if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
+ MPI_CONFIG_PAGETYPE_EXTENDED) {
+ flagsLength |= pExtHdr->ExtPageLength * 4;
+ page_type = pReq->ExtPageType;
+ extend_page = 1;
+ } else {
+ flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
+ page_type = pReq->Header.PageType;
+ extend_page = 0;
+ }
+
+ dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Sending Config request type 0x%x, page 0x%x and action %d\n",
+ ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
+
+ ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+ timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
+ mpt_put_msg_frame(mpt_base_index, ioc, mf);
+ timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
+ timeout);
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Failed Sending Config request type 0x%x, page 0x%x,"
+ " action %d, status %xh, time left %ld\n\n",
+ ioc->name, page_type, pReq->Header.PageNumber,
+ pReq->Action, ioc->mptbase_cmds.status, timeleft));
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ if (!timeleft) {
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+ flags);
+ printk(MYIOC_s_INFO_FMT "%s: host reset in"
+ " progress mpt_config timed out.!!\n",
+ __func__, ioc->name);
+ mutex_unlock(&ioc->mptbase_cmds.mutex);
+ return -EFAULT;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ issue_hard_reset = 1;
+ }
+ goto out;
+ }
+
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ ret = -1;
+ goto out;
+ }
+ pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
+ ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ if (ret == MPI_IOCSTATUS_SUCCESS) {
+ if (extend_page) {
+ pCfg->cfghdr.ehdr->ExtPageLength =
+ le16_to_cpu(pReply->ExtPageLength);
+ pCfg->cfghdr.ehdr->ExtPageType =
+ pReply->ExtPageType;
+ }
+ pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+ pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+ pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+ pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
+
+ }
+
+ if (retry_count)
+ printk(MYIOC_s_INFO_FMT "Retry completed "
+ "ret=0x%x timeleft=%ld\n",
+ ioc->name, ret, timeleft);
+
+ dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
+ ret, le32_to_cpu(pReply->IOCLogInfo)));
+
+out:
+
+ CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+ mutex_unlock(&ioc->mptbase_cmds.mutex);
+ if (issue_hard_reset) {
+ issue_hard_reset = 0;
+ printk(MYIOC_s_WARN_FMT
+ "Issuing Reset from %s!!, doorbell=0x%08x\n",
+ ioc->name, __func__, mpt_GetIocState(ioc, 0));
+ if (retry_count == 0) {
+ if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
+ retry_count++;
+ } else
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+
+ mpt_free_msg_frame(ioc, mf);
+ /* attempt one retry for a timed out command */
+ if (retry_count < 2) {
+ printk(MYIOC_s_INFO_FMT
+ "Attempting Retry Config request"
+ " type 0x%x, page 0x%x,"
+ " action %d\n", ioc->name, page_type,
+ pCfg->cfghdr.hdr->PageNumber, pCfg->action);
+ retry_count++;
+ goto retry_config;
+ }
+ }
+ return ret;
+
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_ioc_reset - Base cleanup for hard reset
+ * @ioc: Pointer to the adapter structure
+ * @reset_phase: Indicates pre- or post-reset functionality
+ *
+ * Remark: Frees resources with internally generated commands.
+ */
+static int
+mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+ switch (reset_phase) {
+ case MPT_IOC_SETUP_RESET:
+ ioc->taskmgmt_quiesce_io = 1;
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_POST_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+/* wake up mptbase_cmds */
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->mptbase_cmds.status |=
+ MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->mptbase_cmds.done);
+ }
+/* wake up taskmgmt_cmds */
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->taskmgmt_cmds.status |=
+ MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->taskmgmt_cmds.done);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 1; /* currently means nothing really */
+}
+
+
+#ifdef CONFIG_PROC_FS /* { */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+procmpt_create(void)
+{
+ mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
+ if (mpt_proc_root_dir == NULL)
+ return -ENOTDIR;
+
+ proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
+ proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static void
+procmpt_destroy(void)
+{
+ remove_proc_entry("version", mpt_proc_root_dir);
+ remove_proc_entry("summary", mpt_proc_root_dir);
+ remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
+ */
+static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
+
+static int mpt_summary_proc_show(struct seq_file *m, void *v)
+{
+ MPT_ADAPTER *ioc = m->private;
+
+ if (ioc) {
+ seq_mpt_print_ioc_summary(ioc, m, 1);
+ } else {
+ list_for_each_entry(ioc, &ioc_list, list) {
+ seq_mpt_print_ioc_summary(ioc, m, 1);
+ }
+ }
+
+ return 0;
+}
+
+static int mpt_summary_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_summary_proc_show, PDE_DATA(inode));
+}
+
+static const struct file_operations mpt_summary_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_summary_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int mpt_version_proc_show(struct seq_file *m, void *v)
+{
+ u8 cb_idx;
+ int scsi, fc, sas, lan, ctl, targ, dmp;
+ char *drvname;
+
+ seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
+ seq_printf(m, " Fusion MPT base driver\n");
+
+ scsi = fc = sas = lan = ctl = targ = dmp = 0;
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ drvname = NULL;
+ if (MptCallbacks[cb_idx]) {
+ switch (MptDriverClass[cb_idx]) {
+ case MPTSPI_DRIVER:
+ if (!scsi++) drvname = "SPI host";
+ break;
+ case MPTFC_DRIVER:
+ if (!fc++) drvname = "FC host";
+ break;
+ case MPTSAS_DRIVER:
+ if (!sas++) drvname = "SAS host";
+ break;
+ case MPTLAN_DRIVER:
+ if (!lan++) drvname = "LAN";
+ break;
+ case MPTSTM_DRIVER:
+ if (!targ++) drvname = "SCSI target";
+ break;
+ case MPTCTL_DRIVER:
+ if (!ctl++) drvname = "ioctl";
+ break;
+ }
+
+ if (drvname)
+ seq_printf(m, " Fusion MPT %s driver\n", drvname);
+ }
+ }
+
+ return 0;
+}
+
+static int mpt_version_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_version_proc_show, NULL);
+}
+
+static const struct file_operations mpt_version_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_version_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
+{
+ MPT_ADAPTER *ioc = m->private;
+ char expVer[32];
+ int sz;
+ int p;
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ seq_printf(m, "%s:", ioc->name);
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
+ seq_printf(m, " (f/w download boot flag set)");
+// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
+// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
+
+ seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
+ ioc->facts.ProductID,
+ ioc->prod_name);
+ seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
+ if (ioc->facts.FWImageSize)
+ seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
+ seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
+ seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
+ seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
+
+ seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
+ ioc->facts.CurrentHostMfaHighAddr);
+ seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
+ ioc->facts.CurrentSenseBufferHighAddr);
+
+ seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
+ seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
+
+ seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
+ (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
+ /*
+ * Rounding UP to nearest 4-kB boundary here...
+ */
+ sz = (ioc->req_sz * ioc->req_depth) + 128;
+ sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
+ seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
+ ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
+ seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
+ 4*ioc->facts.RequestFrameSize,
+ ioc->facts.GlobalCredits);
+
+ seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
+ (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
+ sz = (ioc->reply_sz * ioc->reply_depth) + 128;
+ seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
+ ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
+ seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
+ ioc->facts.CurReplyFrameSize,
+ ioc->facts.ReplyQueueDepth);
+
+ seq_printf(m, " MaxDevices = %d\n",
+ (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
+ seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
+
+ /* per-port info */
+ for (p=0; p < ioc->facts.NumberOfPorts; p++) {
+ seq_printf(m, " PortNumber = %d (of %d)\n",
+ p+1,
+ ioc->facts.NumberOfPorts);
+ if (ioc->bus_type == FC) {
+ if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+ seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
+ ioc->fc_port_page0[p].WWNN.High,
+ ioc->fc_port_page0[p].WWNN.Low,
+ ioc->fc_port_page0[p].WWPN.High,
+ ioc->fc_port_page0[p].WWPN.Low);
+ }
+ }
+
+ return 0;
+}
+
+static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode));
+}
+
+static const struct file_operations mpt_iocinfo_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_iocinfo_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif /* CONFIG_PROC_FS } */
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+static void
+mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
+{
+ buf[0] ='\0';
+ if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
+ sprintf(buf, " (Exp %02d%02d)",
+ (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
+ (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
+
+ /* insider hack! */
+ if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
+ strcat(buf, " [MDBG]");
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @buffer: Pointer to buffer where IOC summary info should be written
+ * @size: Pointer to number of bytes we wrote (set by this routine)
+ * @len: Offset at which to start writing in buffer
+ * @showlan: Display LAN stuff?
+ *
+ * This routine writes (english readable) ASCII text, which represents
+ * a summary of IOC information, to a buffer.
+ */
+void
+mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
+{
+ char expVer[32];
+ int y;
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ /*
+ * Shorter summary of attached ioc's...
+ */
+ y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
+ ioc->name,
+ ioc->prod_name,
+ MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
+ ioc->facts.FWVersion.Word,
+ expVer,
+ ioc->facts.NumberOfPorts,
+ ioc->req_depth);
+
+ if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+
+ y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
+
+ if (!ioc->active)
+ y += sprintf(buffer+len+y, " (disabled)");
+
+ y += sprintf(buffer+len+y, "\n");
+
+ *size = y;
+}
+
+static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
+{
+ char expVer[32];
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ /*
+ * Shorter summary of attached ioc's...
+ */
+ seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
+ ioc->name,
+ ioc->prod_name,
+ MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
+ ioc->facts.FWVersion.Word,
+ expVer,
+ ioc->facts.NumberOfPorts,
+ ioc->req_depth);
+
+ if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+
+ seq_printf(m, ", IRQ=%d", ioc->pci_irq);
+
+ if (!ioc->active)
+ seq_printf(m, " (disabled)");
+
+ seq_putc(m, '\n');
+}
+
+/**
+ * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Returns 0 for SUCCESS or -1 if FAILED.
+ *
+ * If -1 is return, then it was not possible to set the flags
+ **/
+int
+mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
+ (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
+ retval = -1;
+ goto out;
+ }
+ retval = 0;
+ ioc->taskmgmt_in_progress = 1;
+ ioc->taskmgmt_quiesce_io = 1;
+ if (ioc->alt_ioc) {
+ ioc->alt_ioc->taskmgmt_in_progress = 1;
+ ioc->alt_ioc->taskmgmt_quiesce_io = 1;
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return retval;
+}
+EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
+
+/**
+ * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ ioc->taskmgmt_in_progress = 0;
+ ioc->taskmgmt_quiesce_io = 0;
+ if (ioc->alt_ioc) {
+ ioc->alt_ioc->taskmgmt_in_progress = 0;
+ ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+}
+EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
+
+
+/**
+ * mpt_halt_firmware - Halts the firmware if it is operational and panic
+ * the kernel
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_halt_firmware(MPT_ADAPTER *ioc)
+{
+ u32 ioc_raw_state;
+
+ ioc_raw_state = mpt_GetIocState(ioc, 0);
+
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+ printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
+ ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+ panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
+ ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+ } else {
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
+ panic("%s: Firmware is halted due to command timeout\n",
+ ioc->name);
+ }
+}
+EXPORT_SYMBOL(mpt_halt_firmware);
+
+/**
+ * mpt_SoftResetHandler - Issues a less expensive reset
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Indicates if sleep or schedule must be called.
+ *
+ * Returns 0 for SUCCESS or -1 if FAILED.
+ *
+ * Message Unit Reset - instructs the IOC to reset the Reply Post and
+ * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
+ * All posted buffers are freed, and event notification is turned off.
+ * IOC doesn't reply to any outstanding request. This will transfer IOC
+ * to READY state.
+ **/
+static int
+mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ int rc;
+ int ii;
+ u8 cb_idx;
+ unsigned long flags;
+ u32 ioc_state;
+ unsigned long time_count;
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
+ ioc->name));
+
+ ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
+
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
+
+ if (ioc_state == MPI_IOC_STATE_FAULT ||
+ ioc_state == MPI_IOC_STATE_RESET) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "skipping, either in FAULT or RESET state!\n", ioc->name));
+ return -1;
+ }
+
+ if (ioc->bus_type == FC) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "skipping, because the bus type is FC!\n", ioc->name));
+ return -1;
+ }
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return -1;
+ }
+ ioc->ioc_reset_in_progress = 1;
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ rc = -1;
+
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx])
+ mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
+ }
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->taskmgmt_in_progress) {
+ ioc->ioc_reset_in_progress = 0;
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return -1;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ /* Disable reply interrupts (also blocks FreeQ) */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+ time_count = jiffies;
+
+ rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
+
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx])
+ mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
+ }
+
+ if (rc)
+ goto out;
+
+ ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
+ if (ioc_state != MPI_IOC_STATE_READY)
+ goto out;
+
+ for (ii = 0; ii < 5; ii++) {
+ /* Get IOC facts! Allow 5 retries */
+ rc = GetIocFacts(ioc, sleepFlag,
+ MPT_HOSTEVENT_IOC_RECOVER);
+ if (rc == 0)
+ break;
+ if (sleepFlag == CAN_SLEEP)
+ msleep(100);
+ else
+ mdelay(100);
+ }
+ if (ii == 5)
+ goto out;
+
+ rc = PrimeIocFifos(ioc);
+ if (rc != 0)
+ goto out;
+
+ rc = SendIocInit(ioc, sleepFlag);
+ if (rc != 0)
+ goto out;
+
+ rc = SendEventNotification(ioc, 1, sleepFlag);
+ if (rc != 0)
+ goto out;
+
+ if (ioc->hard_resets < -1)
+ ioc->hard_resets++;
+
+ /*
+ * At this point, we know soft reset succeeded.
+ */
+
+ ioc->active = 1;
+ CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
+
+ out:
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ ioc->ioc_reset_in_progress = 0;
+ ioc->taskmgmt_quiesce_io = 0;
+ ioc->taskmgmt_in_progress = 0;
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ if (ioc->active) { /* otherwise, hard reset coming */
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx])
+ mpt_signal_reset(cb_idx, ioc,
+ MPT_IOC_POST_RESET);
+ }
+ }
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "SoftResetHandler: completed (%d seconds): %s\n",
+ ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
+ ((rc == 0) ? "SUCCESS" : "FAILED")));
+
+ return rc;
+}
+
+/**
+ * mpt_Soft_Hard_ResetHandler - Try less expensive reset
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Indicates if sleep or schedule must be called.
+ *
+ * Returns 0 for SUCCESS or -1 if FAILED.
+ * Try for softreset first, only if it fails go for expensive
+ * HardReset.
+ **/
+int
+mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
+ int ret = -1;
+
+ ret = mpt_SoftResetHandler(ioc, sleepFlag);
+ if (ret == 0)
+ return ret;
+ ret = mpt_HardResetHandler(ioc, sleepFlag);
+ return ret;
+}
+EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Reset Handling
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_HardResetHandler - Generic reset handler
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Indicates if sleep or schedule must be called.
+ *
+ * Issues SCSI Task Management call based on input arg values.
+ * If TaskMgmt fails, returns associated SCSI request.
+ *
+ * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
+ * or a non-interrupt thread. In the former, must not call schedule().
+ *
+ * Note: A return of -1 is a FATAL error case, as it means a
+ * FW reload/initialization failed.
+ *
+ * Returns 0 for SUCCESS or -1 if FAILED.
+ */
+int
+mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ int rc;
+ u8 cb_idx;
+ unsigned long flags;
+ unsigned long time_count;
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
+#ifdef MFCNT
+ printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
+ printk("MF count 0x%x !\n", ioc->mfcnt);
+#endif
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
+
+ /* Reset the adapter. Prevent more than 1 call to
+ * mpt_do_ioc_recovery at any instant in time.
+ */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ ioc->wait_on_reset_completion = 1;
+ do {
+ ssleep(1);
+ } while (ioc->ioc_reset_in_progress == 1);
+ ioc->wait_on_reset_completion = 0;
+ return ioc->reset_status;
+ }
+ if (ioc->wait_on_reset_completion) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ rc = 0;
+ time_count = jiffies;
+ goto exit;
+ }
+ ioc->ioc_reset_in_progress = 1;
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->ioc_reset_in_progress = 1;
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+
+ /* The SCSI driver needs to adjust timeouts on all current
+ * commands prior to the diagnostic reset being issued.
+ * Prevents timeouts occurring during a diagnostic reset...very bad.
+ * For all other protocol drivers, this is a no-op.
+ */
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx]) {
+ mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
+ if (ioc->alt_ioc)
+ mpt_signal_reset(cb_idx, ioc->alt_ioc,
+ MPT_IOC_SETUP_RESET);
+ }
+ }
+
+ time_count = jiffies;
+ rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
+ if (rc != 0) {
+ printk(KERN_WARNING MYNAM
+ ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
+ rc, ioc->name, mpt_GetIocState(ioc, 0));
+ } else {
+ if (ioc->hard_resets < -1)
+ ioc->hard_resets++;
+ }
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ ioc->ioc_reset_in_progress = 0;
+ ioc->taskmgmt_quiesce_io = 0;
+ ioc->taskmgmt_in_progress = 0;
+ ioc->reset_status = rc;
+ if (ioc->alt_ioc) {
+ ioc->alt_ioc->ioc_reset_in_progress = 0;
+ ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+ ioc->alt_ioc->taskmgmt_in_progress = 0;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx]) {
+ mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
+ if (ioc->alt_ioc)
+ mpt_signal_reset(cb_idx,
+ ioc->alt_ioc, MPT_IOC_POST_RESET);
+ }
+ }
+exit:
+ dtmprintk(ioc,
+ printk(MYIOC_s_DEBUG_FMT
+ "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
+ jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
+ "SUCCESS" : "FAILED")));
+
+ return rc;
+}
+
+#ifdef CONFIG_FUSION_LOGGING
+static void
+mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
+{
+ char *ds = NULL;
+ u32 evData0;
+ int ii;
+ u8 event;
+ char *evStr = ioc->evStr;
+
+ event = le32_to_cpu(pEventReply->Event) & 0xFF;
+ evData0 = le32_to_cpu(pEventReply->Data[0]);
+
+ switch(event) {
+ case MPI_EVENT_NONE:
+ ds = "None";
+ break;
+ case MPI_EVENT_LOG_DATA:
+ ds = "Log Data";
+ break;
+ case MPI_EVENT_STATE_CHANGE:
+ ds = "State Change";
+ break;
+ case MPI_EVENT_UNIT_ATTENTION:
+ ds = "Unit Attention";
+ break;
+ case MPI_EVENT_IOC_BUS_RESET:
+ ds = "IOC Bus Reset";
+ break;
+ case MPI_EVENT_EXT_BUS_RESET:
+ ds = "External Bus Reset";
+ break;
+ case MPI_EVENT_RESCAN:
+ ds = "Bus Rescan Event";
+ break;
+ case MPI_EVENT_LINK_STATUS_CHANGE:
+ if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
+ ds = "Link Status(FAILURE) Change";
+ else
+ ds = "Link Status(ACTIVE) Change";
+ break;
+ case MPI_EVENT_LOOP_STATE_CHANGE:
+ if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
+ ds = "Loop State(LIP) Change";
+ else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
+ ds = "Loop State(LPE) Change";
+ else
+ ds = "Loop State(LPB) Change";
+ break;
+ case MPI_EVENT_LOGOUT:
+ ds = "Logout";
+ break;
+ case MPI_EVENT_EVENT_CHANGE:
+ if (evData0)
+ ds = "Events ON";
+ else
+ ds = "Events OFF";
+ break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ {
+ u8 ReasonCode = (u8)(evData0 >> 16);
+ switch (ReasonCode) {
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED :
+ ds = "Integrated Raid: Volume Created";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED :
+ ds = "Integrated Raid: Volume Deleted";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
+ ds = "Integrated Raid: Volume Settings Changed";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
+ ds = "Integrated Raid: Volume Status Changed";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
+ ds = "Integrated Raid: Volume Physdisk Changed";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
+ ds = "Integrated Raid: Physdisk Created";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
+ ds = "Integrated Raid: Physdisk Deleted";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
+ ds = "Integrated Raid: Physdisk Settings Changed";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
+ ds = "Integrated Raid: Physdisk Status Changed";
+ break;
+ case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
+ ds = "Integrated Raid: Domain Validation Needed";
+ break;
+ case MPI_EVENT_RAID_RC_SMART_DATA :
+ ds = "Integrated Raid; Smart Data";
+ break;
+ case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
+ ds = "Integrated Raid: Replace Action Started";
+ break;
+ default:
+ ds = "Integrated Raid";
+ break;
+ }
+ break;
+ }
+ case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
+ ds = "SCSI Device Status Change";
+ break;
+ case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ {
+ u8 id = (u8)(evData0);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 ReasonCode = (u8)(evData0 >> 16);
+ switch (ReasonCode) {
+ case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Added: "
+ "id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Deleted: "
+ "id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: SMART Data: "
+ "id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: No Persistancy: "
+ "id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Unsupported Device "
+ "Discovered : id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Device "
+ "Reset : id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Task "
+ "Abort : id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Abort "
+ "Task Set : id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Clear "
+ "Task Set : id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Query "
+ "Task : id=%d channel=%d", id, channel);
+ break;
+ default:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Unknown: "
+ "id=%d channel=%d", id, channel);
+ break;
+ }
+ break;
+ }
+ case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
+ ds = "Bus Timer Expired";
+ break;
+ case MPI_EVENT_QUEUE_FULL:
+ {
+ u16 curr_depth = (u16)(evData0 >> 16);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 id = (u8)(evData0);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "Queue Full: channel=%d id=%d depth=%d",
+ channel, id, curr_depth);
+ break;
+ }
+ case MPI_EVENT_SAS_SES:
+ ds = "SAS SES Event";
+ break;
+ case MPI_EVENT_PERSISTENT_TABLE_FULL:
+ ds = "Persistent Table Full";
+ break;
+ case MPI_EVENT_SAS_PHY_LINK_STATUS:
+ {
+ u8 LinkRates = (u8)(evData0 >> 8);
+ u8 PhyNumber = (u8)(evData0);
+ LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
+ MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
+ switch (LinkRates) {
+ case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
+ " Rate Unknown",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
+ " Phy Disabled",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
+ " Failed Speed Nego",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
+ " Sata OOB Completed",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
+ " Rate 1.5 Gbps",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
+ " Rate 3.0 Gbps", PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
+ " Rate 6.0 Gbps", PhyNumber);
+ break;
+ default:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d", PhyNumber);
+ break;
+ }
+ break;
+ }
+ case MPI_EVENT_SAS_DISCOVERY_ERROR:
+ ds = "SAS Discovery Error";
+ break;
+ case MPI_EVENT_IR_RESYNC_UPDATE:
+ {
+ u8 resync_complete = (u8)(evData0 >> 16);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR Resync Update: Complete = %d:",resync_complete);
+ break;
+ }
+ case MPI_EVENT_IR2:
+ {
+ u8 id = (u8)(evData0);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 phys_num = (u8)(evData0 >> 24);
+ u8 ReasonCode = (u8)(evData0 >> 16);
+
+ switch (ReasonCode) {
+ case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: LD State Changed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD State Changed "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Bad Block Table Full: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_PD_INSERTED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD Inserted: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_PD_REMOVED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD Removed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Foreign CFG Detected: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Rebuild Medium Error: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Dual Port Added: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Dual Port Removed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ default:
+ ds = "IR2";
+ break;
+ }
+ break;
+ }
+ case MPI_EVENT_SAS_DISCOVERY:
+ {
+ if (evData0)
+ ds = "SAS Discovery: Start";
+ else
+ ds = "SAS Discovery: Stop";
+ break;
+ }
+ case MPI_EVENT_LOG_ENTRY_ADDED:
+ ds = "SAS Log Entry Added";
+ break;
+
+ case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+ {
+ u8 phy_num = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 port_width = (u8)(evData0 >> 16);
+ u8 primative = (u8)(evData0 >> 24);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Broadcase Primative: phy=%d port=%d "
+ "width=%d primative=0x%02x",
+ phy_num, port_num, port_width, primative);
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+ {
+ u8 reason = (u8)(evData0);
+
+ switch (reason) {
+ case MPI_EVENT_SAS_INIT_RC_ADDED:
+ ds = "SAS Initiator Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_INIT_RC_REMOVED:
+ ds = "SAS Initiator Status Change: Deleted";
+ break;
+ default:
+ ds = "SAS Initiator Status Change";
+ break;
+ }
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
+ {
+ u8 max_init = (u8)(evData0);
+ u8 current_init = (u8)(evData0 >> 8);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Initiator Device Table Overflow: max initiators=%02d "
+ "current initators=%02d",
+ max_init, current_init);
+ break;
+ }
+ case MPI_EVENT_SAS_SMP_ERROR:
+ {
+ u8 status = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 result = (u8)(evData0 >> 16);
+
+ if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d result=0x%02x",
+ port_num, result);
+ else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : CRC Error",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Timeout",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : No Destination",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Bad Destination",
+ port_num);
+ else
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : status=0x%02x",
+ port_num, status);
+ break;
+ }
+
+ case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+ {
+ u8 reason = (u8)(evData0);
+
+ switch (reason) {
+ case MPI_EVENT_SAS_EXP_RC_ADDED:
+ ds = "Expander Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
+ ds = "Expander Status Change: Deleted";
+ break;
+ default:
+ ds = "Expander Status Change";
+ break;
+ }
+ break;
+ }
+
+ /*
+ * MPT base "custom" events may be added here...
+ */
+ default:
+ ds = "Unknown";
+ break;
+ }
+ if (ds)
+ strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
+
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "MPT event:(%02Xh) : %s\n",
+ ioc->name, event, evStr));
+
+ devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
+ ": Event data:\n"));
+ for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
+ devtverboseprintk(ioc, printk(" %08x",
+ le32_to_cpu(pEventReply->Data[ii])));
+ devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
+}
+#endif
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * ProcessEventNotification - Route EventNotificationReply to all event handlers
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @pEventReply: Pointer to EventNotification reply frame
+ * @evHandlers: Pointer to integer, number of event handlers
+ *
+ * Routes a received EventNotificationReply to all currently registered
+ * event handlers.
+ * Returns sum of event handlers return values.
+ */
+static int
+ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
+{
+ u16 evDataLen;
+ u32 evData0 = 0;
+ int ii;
+ u8 cb_idx;
+ int r = 0;
+ int handlers = 0;
+ u8 event;
+
+ /*
+ * Do platform normalization of values
+ */
+ event = le32_to_cpu(pEventReply->Event) & 0xFF;
+ evDataLen = le16_to_cpu(pEventReply->EventDataLength);
+ if (evDataLen) {
+ evData0 = le32_to_cpu(pEventReply->Data[0]);
+ }
+
+#ifdef CONFIG_FUSION_LOGGING
+ if (evDataLen)
+ mpt_display_event_info(ioc, pEventReply);
+#endif
+
+ /*
+ * Do general / base driver event processing
+ */
+ switch(event) {
+ case MPI_EVENT_EVENT_CHANGE: /* 0A */
+ if (evDataLen) {
+ u8 evState = evData0 & 0xFF;
+
+ /* CHECKME! What if evState unexpectedly says OFF (0)? */
+
+ /* Update EventState field in cached IocFacts */
+ if (ioc->facts.Function) {
+ ioc->facts.EventState = evState;
+ }
+ }
+ break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ mptbase_raid_process_event_data(ioc,
+ (MpiEventDataRaid_t *)pEventReply->Data);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Should this event be logged? Events are written sequentially.
+ * When buffer is full, start again at the top.
+ */
+ if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
+ int idx;
+
+ idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
+
+ ioc->events[idx].event = event;
+ ioc->events[idx].eventContext = ioc->eventContext;
+
+ for (ii = 0; ii < 2; ii++) {
+ if (ii < evDataLen)
+ ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
+ else
+ ioc->events[idx].data[ii] = 0;
+ }
+
+ ioc->eventContext++;
+ }
+
+
+ /*
+ * Call each currently registered protocol event handler.
+ */
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptEvHandlers[cb_idx]) {
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Routing Event to event handler #%d\n",
+ ioc->name, cb_idx));
+ r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
+ handlers++;
+ }
+ }
+ /* FIXME? Examine results here? */
+
+ /*
+ * If needed, send (a single) EventAck.
+ */
+ if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "EventAck required\n",ioc->name));
+ if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
+ ioc->name, ii));
+ }
+ }
+
+ *evHandlers = handlers;
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @log_info: U32 LogInfo reply word from the IOC
+ *
+ * Refer to lsi/mpi_log_fc.h.
+ */
+static void
+mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
+{
+ char *desc = "unknown";
+
+ switch (log_info & 0xFF000000) {
+ case MPI_IOCLOGINFO_FC_INIT_BASE:
+ desc = "FCP Initiator";
+ break;
+ case MPI_IOCLOGINFO_FC_TARGET_BASE:
+ desc = "FCP Target";
+ break;
+ case MPI_IOCLOGINFO_FC_LAN_BASE:
+ desc = "LAN";
+ break;
+ case MPI_IOCLOGINFO_FC_MSG_BASE:
+ desc = "MPI Message Layer";
+ break;
+ case MPI_IOCLOGINFO_FC_LINK_BASE:
+ desc = "FC Link";
+ break;
+ case MPI_IOCLOGINFO_FC_CTX_BASE:
+ desc = "Context Manager";
+ break;
+ case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
+ desc = "Invalid Field Offset";
+ break;
+ case MPI_IOCLOGINFO_FC_STATE_CHANGE:
+ desc = "State Change Info";
+ break;
+ }
+
+ printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
+ ioc->name, log_info, desc, (log_info & 0xFFFFFF));
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @log_info: U32 LogInfo word from the IOC
+ *
+ * Refer to lsi/sp_log.h.
+ */
+static void
+mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
+{
+ u32 info = log_info & 0x00FF0000;
+ char *desc = "unknown";
+
+ switch (info) {
+ case 0x00010000:
+ desc = "bug! MID not found";
+ break;
+
+ case 0x00020000:
+ desc = "Parity Error";
+ break;
+
+ case 0x00030000:
+ desc = "ASYNC Outbound Overrun";
+ break;
+
+ case 0x00040000:
+ desc = "SYNC Offset Error";
+ break;
+
+ case 0x00050000:
+ desc = "BM Change";
+ break;
+
+ case 0x00060000:
+ desc = "Msg In Overflow";
+ break;
+
+ case 0x00070000:
+ desc = "DMA Error";
+ break;
+
+ case 0x00080000:
+ desc = "Outbound DMA Overrun";
+ break;
+
+ case 0x00090000:
+ desc = "Task Management";
+ break;
+
+ case 0x000A0000:
+ desc = "Device Problem";
+ break;
+
+ case 0x000B0000:
+ desc = "Invalid Phase Change";
+ break;
+
+ case 0x000C0000:
+ desc = "Untagged Table Size";
+ break;
+
+ }
+
+ printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
+}
+
+/* strings for sas loginfo */
+ static char *originator_str[] = {
+ "IOP", /* 00h */
+ "PL", /* 01h */
+ "IR" /* 02h */
+ };
+ static char *iop_code_str[] = {
+ NULL, /* 00h */
+ "Invalid SAS Address", /* 01h */
+ NULL, /* 02h */
+ "Invalid Page", /* 03h */
+ "Diag Message Error", /* 04h */
+ "Task Terminated", /* 05h */
+ "Enclosure Management", /* 06h */
+ "Target Mode" /* 07h */
+ };
+ static char *pl_code_str[] = {
+ NULL, /* 00h */
+ "Open Failure", /* 01h */
+ "Invalid Scatter Gather List", /* 02h */
+ "Wrong Relative Offset or Frame Length", /* 03h */
+ "Frame Transfer Error", /* 04h */
+ "Transmit Frame Connected Low", /* 05h */
+ "SATA Non-NCQ RW Error Bit Set", /* 06h */
+ "SATA Read Log Receive Data Error", /* 07h */
+ "SATA NCQ Fail All Commands After Error", /* 08h */
+ "SATA Error in Receive Set Device Bit FIS", /* 09h */
+ "Receive Frame Invalid Message", /* 0Ah */
+ "Receive Context Message Valid Error", /* 0Bh */
+ "Receive Frame Current Frame Error", /* 0Ch */
+ "SATA Link Down", /* 0Dh */
+ "Discovery SATA Init W IOS", /* 0Eh */
+ "Config Invalid Page", /* 0Fh */
+ "Discovery SATA Init Timeout", /* 10h */
+ "Reset", /* 11h */
+ "Abort", /* 12h */
+ "IO Not Yet Executed", /* 13h */
+ "IO Executed", /* 14h */
+ "Persistent Reservation Out Not Affiliation "
+ "Owner", /* 15h */
+ "Open Transmit DMA Abort", /* 16h */
+ "IO Device Missing Delay Retry", /* 17h */
+ "IO Cancelled Due to Receive Error", /* 18h */
+ NULL, /* 19h */
+ NULL, /* 1Ah */
+ NULL, /* 1Bh */
+ NULL, /* 1Ch */
+ NULL, /* 1Dh */
+ NULL, /* 1Eh */
+ NULL, /* 1Fh */
+ "Enclosure Management" /* 20h */
+ };
+ static char *ir_code_str[] = {
+ "Raid Action Error", /* 00h */
+ NULL, /* 00h */
+ NULL, /* 01h */
+ NULL, /* 02h */
+ NULL, /* 03h */
+ NULL, /* 04h */
+ NULL, /* 05h */
+ NULL, /* 06h */
+ NULL /* 07h */
+ };
+ static char *raid_sub_code_str[] = {
+ NULL, /* 00h */
+ "Volume Creation Failed: Data Passed too "
+ "Large", /* 01h */
+ "Volume Creation Failed: Duplicate Volumes "
+ "Attempted", /* 02h */
+ "Volume Creation Failed: Max Number "
+ "Supported Volumes Exceeded", /* 03h */
+ "Volume Creation Failed: DMA Error", /* 04h */
+ "Volume Creation Failed: Invalid Volume Type", /* 05h */
+ "Volume Creation Failed: Error Reading "
+ "MFG Page 4", /* 06h */
+ "Volume Creation Failed: Creating Internal "
+ "Structures", /* 07h */
+ NULL, /* 08h */
+ NULL, /* 09h */
+ NULL, /* 0Ah */
+ NULL, /* 0Bh */
+ NULL, /* 0Ch */
+ NULL, /* 0Dh */
+ NULL, /* 0Eh */
+ NULL, /* 0Fh */
+ "Activation failed: Already Active Volume", /* 10h */
+ "Activation failed: Unsupported Volume Type", /* 11h */
+ "Activation failed: Too Many Active Volumes", /* 12h */
+ "Activation failed: Volume ID in Use", /* 13h */
+ "Activation failed: Reported Failure", /* 14h */
+ "Activation failed: Importing a Volume", /* 15h */
+ NULL, /* 16h */
+ NULL, /* 17h */
+ NULL, /* 18h */
+ NULL, /* 19h */
+ NULL, /* 1Ah */
+ NULL, /* 1Bh */
+ NULL, /* 1Ch */
+ NULL, /* 1Dh */
+ NULL, /* 1Eh */
+ NULL, /* 1Fh */
+ "Phys Disk failed: Too Many Phys Disks", /* 20h */
+ "Phys Disk failed: Data Passed too Large", /* 21h */
+ "Phys Disk failed: DMA Error", /* 22h */
+ "Phys Disk failed: Invalid <channel:id>", /* 23h */
+ "Phys Disk failed: Creating Phys Disk Config "
+ "Page", /* 24h */
+ NULL, /* 25h */
+ NULL, /* 26h */
+ NULL, /* 27h */
+ NULL, /* 28h */
+ NULL, /* 29h */
+ NULL, /* 2Ah */
+ NULL, /* 2Bh */
+ NULL, /* 2Ch */
+ NULL, /* 2Dh */
+ NULL, /* 2Eh */
+ NULL, /* 2Fh */
+ "Compatibility Error: IR Disabled", /* 30h */
+ "Compatibility Error: Inquiry Command Failed", /* 31h */
+ "Compatibility Error: Device not Direct Access "
+ "Device ", /* 32h */
+ "Compatibility Error: Removable Device Found", /* 33h */
+ "Compatibility Error: Device SCSI Version not "
+ "2 or Higher", /* 34h */
+ "Compatibility Error: SATA Device, 48 BIT LBA "
+ "not Supported", /* 35h */
+ "Compatibility Error: Device doesn't have "
+ "512 Byte Block Sizes", /* 36h */
+ "Compatibility Error: Volume Type Check Failed", /* 37h */
+ "Compatibility Error: Volume Type is "
+ "Unsupported by FW", /* 38h */
+ "Compatibility Error: Disk Drive too Small for "
+ "use in Volume", /* 39h */
+ "Compatibility Error: Phys Disk for Create "
+ "Volume not Found", /* 3Ah */
+ "Compatibility Error: Too Many or too Few "
+ "Disks for Volume Type", /* 3Bh */
+ "Compatibility Error: Disk stripe Sizes "
+ "Must be 64KB", /* 3Ch */
+ "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
+ };
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_sas_log_info - Log information returned from SAS IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @log_info: U32 LogInfo reply word from the IOC
+ * @cb_idx: callback function's handle
+ *
+ * Refer to lsi/mpi_log_sas.h.
+ **/
+static void
+mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
+{
+union loginfo_type {
+ u32 loginfo;
+ struct {
+ u32 subcode:16;
+ u32 code:8;
+ u32 originator:4;
+ u32 bus_type:4;
+ }dw;
+};
+ union loginfo_type sas_loginfo;
+ char *originator_desc = NULL;
+ char *code_desc = NULL;
+ char *sub_code_desc = NULL;
+
+ sas_loginfo.loginfo = log_info;
+ if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
+ (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
+ return;
+
+ originator_desc = originator_str[sas_loginfo.dw.originator];
+
+ switch (sas_loginfo.dw.originator) {
+
+ case 0: /* IOP */
+ if (sas_loginfo.dw.code <
+ ARRAY_SIZE(iop_code_str))
+ code_desc = iop_code_str[sas_loginfo.dw.code];
+ break;
+ case 1: /* PL */
+ if (sas_loginfo.dw.code <
+ ARRAY_SIZE(pl_code_str))
+ code_desc = pl_code_str[sas_loginfo.dw.code];
+ break;
+ case 2: /* IR */
+ if (sas_loginfo.dw.code >=
+ ARRAY_SIZE(ir_code_str))
+ break;
+ code_desc = ir_code_str[sas_loginfo.dw.code];
+ if (sas_loginfo.dw.subcode >=
+ ARRAY_SIZE(raid_sub_code_str))
+ break;
+ if (sas_loginfo.dw.code == 0)
+ sub_code_desc =
+ raid_sub_code_str[sas_loginfo.dw.subcode];
+ break;
+ default:
+ return;
+ }
+
+ if (sub_code_desc != NULL)
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code={%s},"
+ " SubCode={%s} cb_idx %s\n",
+ ioc->name, log_info, originator_desc, code_desc,
+ sub_code_desc, MptCallbacksName[cb_idx]);
+ else if (code_desc != NULL)
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code={%s},"
+ " SubCode(0x%04x) cb_idx %s\n",
+ ioc->name, log_info, originator_desc, code_desc,
+ sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
+ else
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
+ " SubCode(0x%04x) cb_idx %s\n",
+ ioc->name, log_info, originator_desc,
+ sas_loginfo.dw.code, sas_loginfo.dw.subcode,
+ MptCallbacksName[cb_idx]);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_iocstatus_info_config - IOCSTATUS information for config pages
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ioc_status: U32 IOCStatus word from IOC
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+{
+ Config_t *pReq = (Config_t *)mf;
+ char extend_desc[EVENT_DESCR_STR_SZ];
+ char *desc = NULL;
+ u32 form;
+ u8 page_type;
+
+ if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
+ page_type = pReq->ExtPageType;
+ else
+ page_type = pReq->Header.PageType;
+
+ /*
+ * ignore invalid page messages for GET_NEXT_HANDLE
+ */
+ form = le32_to_cpu(pReq->PageAddress);
+ if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+ if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
+ if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
+ MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
+ return;
+ }
+ if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
+ if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
+ MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
+ return;
+ }
+
+ snprintf(extend_desc, EVENT_DESCR_STR_SZ,
+ "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
+ page_type, pReq->Header.PageNumber, pReq->Action, form);
+
+ switch (ioc_status) {
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
+ desc = "Config Page Invalid Action";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
+ desc = "Config Page Invalid Type";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
+ desc = "Config Page Invalid Page";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
+ desc = "Config Page Invalid Data";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
+ desc = "Config Page No Defaults";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
+ desc = "Config Page Can't Commit";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
+ ioc->name, ioc_status, desc, extend_desc));
+}
+
+/**
+ * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ioc_status: U32 IOCStatus word from IOC
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+{
+ u32 status = ioc_status & MPI_IOCSTATUS_MASK;
+ char *desc = NULL;
+
+ switch (status) {
+
+/****************************************************************************/
+/* Common IOCStatus values for all replies */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
+ desc = "Invalid Function";
+ break;
+
+ case MPI_IOCSTATUS_BUSY: /* 0x0002 */
+ desc = "Busy";
+ break;
+
+ case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
+ desc = "Invalid SGL";
+ break;
+
+ case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
+ desc = "Internal Error";
+ break;
+
+ case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
+ desc = "Reserved";
+ break;
+
+ case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
+ desc = "Insufficient Resources";
+ break;
+
+ case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
+ desc = "Invalid Field";
+ break;
+
+ case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
+ desc = "Invalid State";
+ break;
+
+/****************************************************************************/
+/* Config IOCStatus values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
+ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
+ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
+ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
+ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
+ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
+ mpt_iocstatus_info_config(ioc, status, mf);
+ break;
+
+/****************************************************************************/
+/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
+/* */
+/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
+/* */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ break;
+
+/****************************************************************************/
+/* SCSI Target values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
+ desc = "Target: Priority IO";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
+ desc = "Target: Invalid Port";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
+ desc = "Target Invalid IO Index:";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
+ desc = "Target: Aborted";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
+ desc = "Target: No Conn Retryable";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
+ desc = "Target: No Connection";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
+ desc = "Target: Transfer Count Mismatch";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
+ desc = "Target: STS Data not Sent";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
+ desc = "Target: Data Offset Error";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
+ desc = "Target: Too Much Write Data";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
+ desc = "Target: IU Too Short";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
+ desc = "Target: ACK NAK Timeout";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
+ desc = "Target: Nak Received";
+ break;
+
+/****************************************************************************/
+/* Fibre Channel Direct Access values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
+ desc = "FC: Aborted";
+ break;
+
+ case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
+ desc = "FC: RX ID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
+ desc = "FC: DID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
+ desc = "FC: Node Logged Out";
+ break;
+
+ case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
+ desc = "FC: Exchange Canceled";
+ break;
+
+/****************************************************************************/
+/* LAN values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
+ desc = "LAN: Device not Found";
+ break;
+
+ case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
+ desc = "LAN: Device Failure";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
+ desc = "LAN: Transmit Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
+ desc = "LAN: Transmit Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
+ desc = "LAN: Receive Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
+ desc = "LAN: Receive Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
+ desc = "LAN: Partial Packet";
+ break;
+
+ case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
+ desc = "LAN: Canceled";
+ break;
+
+/****************************************************************************/
+/* Serial Attached SCSI values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
+ desc = "SAS: SMP Request Failed";
+ break;
+
+ case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
+ desc = "SAS: SMP Data Overrun";
+ break;
+
+ default:
+ desc = "Others";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
+ ioc->name, status, desc));
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+EXPORT_SYMBOL(mpt_attach);
+EXPORT_SYMBOL(mpt_detach);
+#ifdef CONFIG_PM
+EXPORT_SYMBOL(mpt_resume);
+EXPORT_SYMBOL(mpt_suspend);
+#endif
+EXPORT_SYMBOL(ioc_list);
+EXPORT_SYMBOL(mpt_register);
+EXPORT_SYMBOL(mpt_deregister);
+EXPORT_SYMBOL(mpt_event_register);
+EXPORT_SYMBOL(mpt_event_deregister);
+EXPORT_SYMBOL(mpt_reset_register);
+EXPORT_SYMBOL(mpt_reset_deregister);
+EXPORT_SYMBOL(mpt_device_driver_register);
+EXPORT_SYMBOL(mpt_device_driver_deregister);
+EXPORT_SYMBOL(mpt_get_msg_frame);
+EXPORT_SYMBOL(mpt_put_msg_frame);
+EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
+EXPORT_SYMBOL(mpt_free_msg_frame);
+EXPORT_SYMBOL(mpt_send_handshake_request);
+EXPORT_SYMBOL(mpt_verify_adapter);
+EXPORT_SYMBOL(mpt_GetIocState);
+EXPORT_SYMBOL(mpt_print_ioc_summary);
+EXPORT_SYMBOL(mpt_HardResetHandler);
+EXPORT_SYMBOL(mpt_config);
+EXPORT_SYMBOL(mpt_findImVolumes);
+EXPORT_SYMBOL(mpt_alloc_fw_memory);
+EXPORT_SYMBOL(mpt_free_fw_memory);
+EXPORT_SYMBOL(mptbase_sas_persist_operation);
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * fusion_init - Fusion MPT base driver initialization routine.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int __init
+fusion_init(void)
+{
+ u8 cb_idx;
+
+ show_mptmod_ver(my_NAME, my_VERSION);
+ printk(KERN_INFO COPYRIGHT "\n");
+
+ for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
+ MptCallbacks[cb_idx] = NULL;
+ MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
+ MptEvHandlers[cb_idx] = NULL;
+ MptResetHandlers[cb_idx] = NULL;
+ }
+
+ /* Register ourselves (mptbase) in order to facilitate
+ * EventNotification handling.
+ */
+ mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
+ "mptbase_reply");
+
+ /* Register for hard reset handling callbacks.
+ */
+ mpt_reset_register(mpt_base_index, mpt_ioc_reset);
+
+#ifdef CONFIG_PROC_FS
+ (void) procmpt_create();
+#endif
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * fusion_exit - Perform driver unload cleanup.
+ *
+ * This routine frees all resources associated with each MPT adapter
+ * and removes all %MPT_PROCFS_MPTBASEDIR entries.
+ */
+static void __exit
+fusion_exit(void)
+{
+
+ mpt_reset_deregister(mpt_base_index);
+
+#ifdef CONFIG_PROC_FS
+ procmpt_destroy();
+#endif
+}
+
+module_init(fusion_init);
+module_exit(fusion_exit);