diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 1470 |
1 files changed, 1470 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig new file mode 100644 index 000000000..d5ad04dad --- /dev/null +++ b/drivers/mfd/Kconfig @@ -0,0 +1,1470 @@ +# +# Multifunction miscellaneous devices +# + +if HAS_IOMEM +menu "Multifunction device drivers" + +config MFD_CORE + tristate + select IRQ_DOMAIN + default n + +config MFD_CS5535 + tristate "AMD CS5535 and CS5536 southbridge core functions" + select MFD_CORE + depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) + ---help--- + This is the core driver for CS5535/CS5536 MFD functions. This is + necessary for using the board's GPIO and MFGPT functionality. + +config MFD_AS3711 + bool "AMS AS3711" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + Support for the AS3711 PMIC from AMS + +config MFD_AS3722 + bool "ams AS3722 Power Management IC" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y && OF + help + The ams AS3722 is a compact system PMU suitable for mobile phones, + tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down + controllers, 11 LDOs, RTC, automatic battery, temperature and + over current monitoring, GPIOs, ADC and a watchdog. + +config PMIC_ADP5520 + bool "Analog Devices ADP5520/01 MFD PMIC Core Support" + depends on I2C=y + help + Say yes here to add support for Analog Devices AD5520 and ADP5501, + Multifunction Power Management IC. This includes + the I2C driver and the core APIs _only_, you have to select + individual components like LCD backlight, LEDs, GPIOs and Kepad + under the corresponding menus. + +config MFD_AAT2870_CORE + bool "AnalogicTech AAT2870" + select MFD_CORE + depends on I2C=y && GPIOLIB + help + If you say yes here you get support for the AAT2870. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + +config MFD_ATMEL_HLCDC + tristate "Atmel HLCDC (High-end LCD Controller)" + select MFD_CORE + select REGMAP_MMIO + depends on OF + help + If you say yes here you get support for the HLCDC block. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + +config MFD_BCM590XX + tristate "Broadcom BCM590xx PMUs" + select MFD_CORE + select REGMAP_I2C + depends on I2C + help + Support for the BCM590xx PMUs from Broadcom + +config MFD_AXP20X + bool "X-Powers AXP20X" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + If you say Y here you get support for the X-Powers AXP202, AXP209 and + AXP288 power management IC (PMIC). + This driver include only the core APIs. You have to select individual + components like regulators or the PEK (Power Enable Key) under the + corresponding menus. + +config MFD_CROS_EC + tristate "ChromeOS Embedded Controller" + select MFD_CORE + help + If you say Y here you get support for the ChromeOS Embedded + Controller (EC) providing keyboard, battery and power services. + You also need to enable the driver for the bus you are using. The + protocol for talking to the EC is defined by the bus driver. + +config MFD_CROS_EC_I2C + tristate "ChromeOS Embedded Controller (I2C)" + depends on MFD_CROS_EC && I2C + + help + If you say Y here, you get support for talking to the ChromeOS + EC through an I2C bus. This uses a simple byte-level protocol with + a checksum. Failing accesses will be retried three times to + improve reliability. + +config MFD_CROS_EC_SPI + tristate "ChromeOS Embedded Controller (SPI)" + depends on MFD_CROS_EC && SPI && OF + + ---help--- + If you say Y here, you get support for talking to the ChromeOS EC + through a SPI bus, using a byte-level protocol. Since the EC's + response time cannot be guaranteed, we support ignoring + 'pre-amble' bytes before the response actually starts. + +config MFD_ASIC3 + bool "Compaq ASIC3" + depends on GPIOLIB && ARM + select MFD_CORE + ---help--- + This driver supports the ASIC3 multifunction chip found on many + PDAs (mainly iPAQ and HTC based ones) + +config PMIC_DA903X + bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" + depends on I2C=y + help + Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a + ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC + usually found on PXA processors-based platforms. This includes + the I2C driver and the core APIs _only_, you have to select + individual components like LCD backlight, voltage regulators, + LEDs and battery-charger under the corresponding menus. + +config PMIC_DA9052 + bool + select MFD_CORE + +config MFD_DA9052_SPI + bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI" + select REGMAP_SPI + select REGMAP_IRQ + select PMIC_DA9052 + depends on SPI_MASTER=y + help + Support for the Dialog Semiconductor DA9052 PMIC + when controlled using SPI. This driver provides common support + for accessing the device, additional drivers must be enabled in + order to use the functionality of the device. + +config MFD_DA9052_I2C + bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C" + select REGMAP_I2C + select REGMAP_IRQ + select PMIC_DA9052 + depends on I2C=y + help + Support for the Dialog Semiconductor DA9052 PMIC + when controlled using I2C. This driver provides common support + for accessing the device, additional drivers must be enabled in + order to use the functionality of the device. + +config MFD_DA9055 + bool "Dialog Semiconductor DA9055 PMIC Support" + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + depends on I2C=y + help + Say yes here for support of Dialog Semiconductor DA9055. This is + a Power Management IC. This driver provides common support for + accessing the device as well as the I2C interface to the chip itself. + Additional drivers must be enabled in order to use the functionality + of the device. + + This driver can be built as a module. If built as a module it will be + called "da9055" + +config MFD_DA9063 + bool "Dialog Semiconductor DA9063 PMIC Support" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + Say yes here for support for the Dialog Semiconductor DA9063 PMIC. + This includes the I2C driver and core APIs. + Additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_DA9150 + tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + This adds support for the DA9150 integrated charger and fuel-gauge + chip. This driver provides common support for accessing the device. + Additional drivers must be enabled in order to use the specific + features of the device. + +config MFD_DLN2 + tristate "Diolan DLN2 support" + select MFD_CORE + depends on USB + help + This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter + DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2, + etc. must be enabled in order to use the functionality of + the device. + +config MFD_MC13XXX + tristate + depends on (SPI_MASTER || I2C) + select MFD_CORE + select REGMAP_IRQ + help + Enable support for the Freescale MC13783 and MC13892 PMICs. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + +config MFD_MC13XXX_SPI + tristate "Freescale MC13783 and MC13892 SPI interface" + depends on SPI_MASTER + select REGMAP_SPI + select MFD_MC13XXX + help + Select this if your MC13xxx is connected via an SPI bus. + +config MFD_MC13XXX_I2C + tristate "Freescale MC13892 I2C interface" + depends on I2C + select REGMAP_I2C + select MFD_MC13XXX + help + Select this if your MC13xxx is connected via an I2C bus. + +config MFD_HI6421_PMIC + tristate "HiSilicon Hi6421 PMU/Codec IC" + depends on OF + select MFD_CORE + select REGMAP_MMIO + help + Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi- + functions, such as regulators, RTC, codec, Coulomb counter, etc. + This driver includes core APIs _only_. You have to select + individul components like voltage regulators under corresponding + menus in order to enable them. + We communicate with the Hi6421 via memory-mapped I/O. + +config HTC_EGPIO + bool "HTC EGPIO support" + depends on GPIOLIB && ARM + help + This driver supports the CPLD egpio chip present on + several HTC phones. It provides basic support for input + pins, output pins, and irqs. + +config HTC_PASIC3 + tristate "HTC PASIC3 LED/DS1WM chip support" + select MFD_CORE + help + This core driver provides register access for the LED/DS1WM + chips labeled "AIC2" and "AIC3", found on HTC Blueangel and + HTC Magician devices, respectively. Actual functionality is + handled by the leds-pasic3 and ds1wm drivers. + +config HTC_I2CPLD + bool "HTC I2C PLD chip support" + depends on I2C=y && GPIOLIB + help + If you say yes here you get support for the supposed CPLD + found on omap850 HTC devices like the HTC Wizard and HTC Herald. + This device provides input and output GPIOs through an I2C + interface to one or more sub-chips. + +config MFD_INTEL_QUARK_I2C_GPIO + tristate "Intel Quark MFD I2C GPIO" + depends on PCI + depends on X86 + depends on COMMON_CLK + select MFD_CORE + help + This MFD provides support for I2C and GPIO that exist only + in a single PCI device. It splits the 2 IO devices to + their respective IO driver. + The GPIO exports a total amount of 8 interrupt-capable GPIOs. + +config LPC_ICH + tristate "Intel ICH LPC" + depends on PCI + select MFD_CORE + help + The LPC bridge function of the Intel ICH provides support for + many functional units. This driver provides needed support for + other drivers to control these functions, currently GPIO and + watchdog. + +config LPC_SCH + tristate "Intel SCH LPC" + depends on PCI + select MFD_CORE + help + LPC bridge function of the Intel SCH provides support for + System Management Bus and General Purpose I/O. + +config INTEL_SOC_PMIC + bool "Support for Intel Atom SoC PMIC" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Select this option to enable support for the PMIC device + on some Intel SoC systems. The PMIC provides ADC, GPIO, + thermal, charger and related power management functions + on these systems. + +config MFD_INTEL_MSIC + bool "Intel MSIC" + depends on INTEL_SCU_IPC + select MFD_CORE + help + Select this option to enable access to Intel MSIC (Avatele + Passage) chip. This chip embeds audio, battery, GPIO, etc. + devices used in Intel Medfield platforms. + +config MFD_IPAQ_MICRO + bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" + depends on SA1100_H3100 || SA1100_H3600 + select MFD_CORE + help + Select this to get support for the Microcontroller found in + the Compaq iPAQ handheld computers. This is an Atmel + AT90LS8535 microcontroller flashed with a special iPAQ + firmware using the custom protocol implemented in this driver. + +config MFD_JANZ_CMODIO + tristate "Janz CMOD-IO PCI MODULbus Carrier Board" + select MFD_CORE + depends on PCI + help + This is the core driver for the Janz CMOD-IO PCI MODULbus + carrier board. This device is a PCI to MODULbus bridge which may + host many different types of MODULbus daughterboards, including + CAN and GPIO controllers. + +config MFD_JZ4740_ADC + bool "Janz JZ4740 ADC core" + select MFD_CORE + select GENERIC_IRQ_CHIP + depends on MACH_JZ4740 + help + Say yes here if you want support for the ADC unit in the JZ4740 SoC. + This driver is necessary for jz4740-battery and jz4740-hwmon driver. + +config MFD_KEMPLD + tristate "Kontron module PLD device" + select MFD_CORE + help + This is the core driver for the PLD (Programmable Logic Device) found + on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD + device may provide functions like watchdog, GPIO, UART and I2C bus. + + The following modules are supported: + * COMe-bHL6 + * COMe-bIP# + * COMe-bPC2 (ETXexpress-PC) + * COMe-bSC# (ETXexpress-SC T#) + * COMe-cBL6 + * COMe-cBT6 + * COMe-cCT6 + * COMe-cDC2 (microETXexpress-DC) + * COMe-cHL6 + * COMe-cPC2 (microETXexpress-PC) + * COMe-mBT10 + * COMe-mCT10 + * COMe-mTT10 (nanoETXexpress-TT) + * ETX-OH + + This driver can also be built as a module. If so, the module + will be called kempld-core. + +config MFD_88PM800 + tristate "Marvell 88PM800" + depends on I2C=y + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + This supports for Marvell 88PM800 Power Management IC. + This includes the I2C driver and the core APIs _only_, you have to + select individual components like voltage regulators, RTC and + battery-charger under the corresponding menus. + +config MFD_88PM805 + tristate "Marvell 88PM805" + depends on I2C=y + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + This supports for Marvell 88PM805 Power Management IC. This includes + the I2C driver and the core APIs _only_, you have to select individual + components like codec device, headset/Mic device under the + corresponding menus. + +config MFD_88PM860X + bool "Marvell 88PM8606/88PM8607" + depends on I2C=y + select REGMAP_I2C + select MFD_CORE + help + This supports for Marvell 88PM8606/88PM8607 Power Management IC. + This includes the I2C driver and the core APIs _only_, you have to + select individual components like voltage regulators, RTC and + battery-charger under the corresponding menus. + +config MFD_MAX14577 + bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + select IRQ_DOMAIN + help + Say yes here to add support for Maxim Semiconductor MAX14577 and + MAX77836 Micro-USB ICs with battery charger. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_MAX77686 + bool "Maxim Semiconductor MAX77686/802 PMIC Support" + depends on I2C=y + depends on OF + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + select IRQ_DOMAIN + help + Say yes here to add support for Maxim Semiconductor MAX77686 and + MAX77802 which are Power Management IC with an RTC on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_MAX77693 + bool "Maxim Semiconductor MAX77693 PMIC Support" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim Semiconductor MAX77693. + This is a companion Power Management IC with Flash, Haptic, Charger, + and MUIC(Micro USB Interface Controller) controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_MAX77843 + bool "Maxim Semiconductor MAX77843 PMIC Support" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim Semiconductor MAX77843. + This is companion Power Management IC with LEDs, Haptic, Charger, + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_MAX8907 + tristate "Maxim Semiconductor MAX8907 PMIC Support" + select MFD_CORE + depends on I2C=y + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim Semiconductor MAX8907. This is + a Power Management IC. This driver provides common support for + accessing the device; additional drivers must be enabled in order + to use the functionality of the device. + +config MFD_MAX8925 + bool "Maxim Semiconductor MAX8925 PMIC Support" + depends on I2C=y + select MFD_CORE + help + Say yes here to add support for Maxim Semiconductor MAX8925. This is + a Power Management IC. This driver provides common support for + accessing the device, additional drivers must be enabled in order + to use the functionality of the device. + +config MFD_MAX8997 + bool "Maxim Semiconductor MAX8997/8966 PMIC Support" + depends on I2C=y + select MFD_CORE + select IRQ_DOMAIN + help + Say yes here to add support for Maxim Semiconductor MAX8997/8966. + This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, + MUIC controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_MAX8998 + bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" + depends on I2C=y + select MFD_CORE + select IRQ_DOMAIN + help + Say yes here to add support for Maxim Semiconductor MAX8998 and + National Semiconductor LP3974. This is a Power Management IC. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_MT6397 + tristate "MediaTek MT6397 PMIC Support" + select MFD_CORE + select IRQ_DOMAIN + help + Say yes here to add support for MediaTek MT6397 PMIC. This is + a Power Management IC. This driver provides common support for + accessing the device; additional drivers must be enabled in order + to use the functionality of the device. + +config MFD_MENF21BMC + tristate "MEN 14F021P00 Board Management Controller Support" + depends on I2C + select MFD_CORE + help + Say yes here to add support for the MEN 14F021P00 BMC + which is a Board Management Controller connected to the I2C bus. + The device supports multiple sub-devices like LED, HWMON and WDT. + This driver provides common support for accessing the devices; + additional drivers must be enabled in order to use the + functionality of the BMC device. + + This driver can also be built as a module. If so the module + will be called menf21bmc. + +config EZX_PCAP + bool "Motorola EZXPCAP Support" + depends on SPI_MASTER + help + This enables the PCAP ASIC present on EZX Phones. This is + needed for MMC, TouchScreen, Sound, USB, etc.. + +config MFD_VIPERBOARD + tristate "Nano River Technologies Viperboard" + select MFD_CORE + depends on USB + default n + help + Say yes here if you want support for Nano River Technologies + Viperboard. + There are mfd cell drivers available for i2c master, adc and + both gpios found on the board. The spi part does not yet + have a driver. + You need to select the mfd cell drivers separately. + The drivers do not support all features the board exposes. + +config MFD_RETU + tristate "Nokia Retu and Tahvo multi-function device" + select MFD_CORE + depends on I2C + select REGMAP_IRQ + help + Retu and Tahvo are a multi-function devices found on Nokia + Internet Tablets (770, N800 and N810). + +config MFD_PCF50633 + tristate "NXP PCF50633" + depends on I2C + select REGMAP_I2C + help + Say yes here if you have NXP PCF50633 chip on your board. + This core driver provides register access and IRQ handling + facilities, and registers devices for the various functions + so that function-specific drivers can bind to them. + +config PCF50633_ADC + tristate "NXP PCF50633 ADC" + depends on MFD_PCF50633 + help + Say yes here if you want to include support for ADC in the + NXP PCF50633 chip. + +config PCF50633_GPIO + tristate "NXP PCF50633 GPIO" + depends on MFD_PCF50633 + help + Say yes here if you want to include support GPIO for pins on + the PCF50633 chip. + +config UCB1400_CORE + tristate "Philips UCB1400 Core driver" + depends on AC97_BUS + depends on GPIOLIB + help + This enables support for the Philips UCB1400 core functions. + The UCB1400 is an AC97 audio codec. + + To compile this driver as a module, choose M here: the + module will be called ucb1400_core. + +config MFD_PM8XXX + tristate + +config MFD_PM8921_CORE + tristate "Qualcomm PM8921 PMIC chip" + depends on (ARM || HEXAGON) + select IRQ_DOMAIN + select MFD_CORE + select MFD_PM8XXX + select REGMAP + help + If you say yes to this option, support will be included for the + built-in PM8921 PMIC chip. + + This is required if your board has a PM8921 and uses its features, + such as: MPPs, GPIOs, regulators, interrupts, and PWM. + + Say M here if you want to include support for PM8921 chip as a module. + This will build a module called "pm8921-core". + +config MFD_QCOM_RPM + tristate "Qualcomm Resource Power Manager (RPM)" + depends on ARCH_QCOM && OF + help + If you say yes to this option, support will be included for the + Resource Power Manager system found in the Qualcomm 8660, 8960 and + 8064 based devices. + + This is required to access many regulators, clocks and bus + frequencies controlled by the RPM on these devices. + + Say M here if you want to include support for the Qualcomm RPM as a + module. This will build a module called "qcom_rpm". + +config MFD_SPMI_PMIC + tristate "Qualcomm SPMI PMICs" + depends on ARCH_QCOM || COMPILE_TEST + depends on OF + depends on SPMI + select REGMAP_SPMI + help + This enables support for the Qualcomm SPMI PMICs. + These PMICs are currently used with the Snapdragon 800 series of + SoCs. Note, that this will only be useful paired with descriptions + of the independent functions as children nodes in the device tree. + + Say M here if you want to include support for the SPMI PMIC + series as a module. The module will be called "qcom-spmi-pmic". + +config MFD_RDC321X + tristate "RDC R-321x southbridge" + select MFD_CORE + depends on PCI + help + Say yes here if you want to have support for the RDC R-321x SoC + southbridge which provides access to GPIOs and Watchdog using the + southbridge PCI device configuration space. + +config MFD_RTSX_PCI + tristate "Realtek PCI-E card reader" + depends on PCI + select MFD_CORE + help + This supports for Realtek PCI-Express card reader including rts5209, + rts5229, rtl8411, etc. Realtek card reader supports access to many + types of memory cards, such as Memory Stick, Memory Stick Pro, + Secure Digital and MultiMediaCard. + +config MFD_RT5033 + tristate "Richtek RT5033 Power Management IC" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + This driver provides for the Richtek RT5033 Power Management IC, + which includes the I2C driver and the Core APIs. This driver provides + common support for accessing the device. The device supports multiple + sub-devices like charger, fuel gauge, flash LED, current source, + LDO and Buck. + +config MFD_RTSX_USB + tristate "Realtek USB card reader" + depends on USB + select MFD_CORE + help + Select this option to get support for Realtek USB 2.0 card readers + including RTS5129, RTS5139, RTS5179 and RTS5170. + Realtek card reader supports access to many types of memory cards, + such as Memory Stick Pro, Secure Digital and MultiMediaCard. + +config MFD_RC5T583 + bool "Ricoh RC5T583 Power Management system device" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + help + Select this option to get support for the RICOH583 Power + Management system device. + This driver provides common support for accessing the device + through i2c interface. The device supports multiple sub-devices + like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. + Additional drivers must be enabled in order to use the + different functionality of the device. + +config MFD_RK808 + tristate "Rockchip RK808 Power Management chip" + depends on I2C && OF + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the RK808 + Power Management chips. + This driver provides common support for accessing the device + through I2C interface. The device supports multiple sub-devices + including interrupts, RTC, LDO & DCDC regulators, and onkey. + +config MFD_RN5T618 + tristate "Ricoh RN5T5618 PMIC" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Say yes here to add support for the Ricoh RN5T618 PMIC. This + driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + +config MFD_SEC_CORE + bool "SAMSUNG Electronics PMIC Series Support" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Support for the Samsung Electronics MFD series. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device + +config MFD_SI476X_CORE + tristate "Silicon Laboratories 4761/64/68 AM/FM radio." + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + This is the core driver for the SI476x series of AM/FM + radio. This MFD driver connects the radio-si476x V4L2 module + and the si476x audio codec. + + To compile this driver as a module, choose M here: the + module will be called si476x-core. + +config MFD_SM501 + tristate "Silicon Motion SM501" + ---help--- + This is the core driver for the Silicon Motion SM501 multimedia + companion chip. This device is a multifunction device which may + provide numerous interfaces including USB host controller, USB gadget, + asynchronous serial ports, audio functions, and a dual display video + interface. The device may be connected by PCI or local bus with + varying functions enabled. + +config MFD_SM501_GPIO + bool "Export GPIO via GPIO layer" + depends on MFD_SM501 && GPIOLIB + ---help--- + This option uses the gpio library layer to export the 64 GPIO + lines on the SM501. The platform data is used to supply the + base number for the first GPIO line to register. + +config MFD_SKY81452 + tristate "Skyworks Solutions SKY81452" + select MFD_CORE + select REGMAP_I2C + depends on I2C + help + This is the core driver for the Skyworks SKY81452 backlight and + voltage regulator device. + + This driver can also be built as a module. If so, the module + will be called sky81452. + +config MFD_SMSC + bool "SMSC ECE1099 series chips" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the + ece1099 chips from SMSC. + + To compile this driver as a module, choose M here: the + module will be called smsc. + +config ABX500_CORE + bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" + default y if ARCH_U300 || ARCH_U8500 + help + Say yes here if you have the ABX500 Mixed Signal IC family + chips. This core driver expose register access functions. + Functionality specific drivers using these functions can + remain unchanged when IC changes. Binding of the functions to + actual register access is done by the IC core driver. + +config AB3100_CORE + bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" + depends on I2C=y && ABX500_CORE + select MFD_CORE + default y if ARCH_U300 + help + Select this to enable the AB3100 Mixed Signal IC core + functionality. This connects to a AB3100 on the I2C bus + and expose a number of symbols needed for dependent devices + to read and write registers and subscribe to events from + this multi-functional IC. This is needed to use other features + of the AB3100 such as battery-backed RTC, charging control, + LEDs, vibrator, system power and temperature, power management + and ALSA sound. + +config AB3100_OTP + tristate "ST-Ericsson AB3100 OTP functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + Select this to enable the AB3100 Mixed Signal IC OTP (one-time + programmable memory) support. This exposes a sysfs file to read + out OTP values. + +config AB8500_CORE + bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" + depends on ABX500_CORE && MFD_DB8500_PRCMU + select POWER_SUPPLY + select MFD_CORE + select IRQ_DOMAIN + help + Select this option to enable access to AB8500 power management + chip. This connects to U8500 either on the SSP/SPI bus (deprecated + since hardware version v1.0) or the I2C bus via PRCMU. It also adds + the irq_chip parts for handling the Mixed Signal chip events. + This chip embeds various other multimedia funtionalities as well. + +config AB8500_DEBUG + bool "Enable debug info via debugfs" + depends on AB8500_GPADC && DEBUG_FS + default y if DEBUG_FS + help + Select this option if you want debug information using the debug + filesystem, debugfs. + +config AB8500_GPADC + bool "ST-Ericsson AB8500 GPADC driver" + depends on AB8500_CORE && REGULATOR_AB8500 + default y + help + AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage + +config MFD_DB8500_PRCMU + bool "ST-Ericsson DB8500 Power Reset Control Management Unit" + depends on UX500_SOC_DB8500 + select MFD_CORE + help + Select this option to enable support for the DB8500 Power Reset + and Control Management Unit. This is basically an autonomous + system controller running an XP70 microprocessor, which is accessed + through a register map. + +config MFD_STMPE + bool "STMicroelectronics STMPE" + depends on (I2C=y || SPI_MASTER=y) + depends on OF + select MFD_CORE + help + Support for the STMPE family of I/O Expanders from + STMicroelectronics. + + Currently supported devices are: + + STMPE811: GPIO, Touchscreen + STMPE1601: GPIO, Keypad + STMPE1801: GPIO, Keypad + STMPE2401: GPIO, Keypad + STMPE2403: GPIO, Keypad + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. Currently available sub drivers are: + + GPIO: stmpe-gpio + Keypad: stmpe-keypad + Touchscreen: stmpe-ts + +menu "STMicroelectronics STMPE Interface Drivers" +depends on MFD_STMPE + +config STMPE_I2C + bool "STMicroelectronics STMPE I2C Interface" + depends on I2C=y + default y + help + This is used to enable I2C interface of STMPE + +config STMPE_SPI + bool "STMicroelectronics STMPE SPI Interface" + depends on SPI_MASTER + help + This is used to enable SPI interface of STMPE +endmenu + +config MFD_STA2X11 + bool "STMicroelectronics STA2X11" + depends on STA2X11 + select MFD_CORE + select REGMAP_MMIO + +config MFD_SUN6I_PRCM + bool "Allwinner A31 PRCM controller" + depends on ARCH_SUNXI + select MFD_CORE + help + Support for the PRCM (Power/Reset/Clock Management) unit available + in A31 SoC. + +config MFD_SYSCON + bool "System Controller Register R/W Based on Regmap" + select REGMAP_MMIO + help + Select this option to enable accessing system control registers + via regmap. + +config MFD_DAVINCI_VOICECODEC + tristate + select MFD_CORE + select REGMAP_MMIO + +config MFD_TI_AM335X_TSCADC + tristate "TI ADC / Touch Screen chip support" + select MFD_CORE + select REGMAP + select REGMAP_MMIO + help + If you say yes here you get support for Texas Instruments series + of Touch Screen /ADC chips. + To compile this driver as a module, choose M here: the + module will be called ti_am335x_tscadc. + +config MFD_DM355EVM_MSP + bool "TI DaVinci DM355 EVM microcontroller" + depends on I2C=y && MACH_DAVINCI_DM355_EVM + help + This driver supports the MSP430 microcontroller used on these + boards. MSP430 firmware manages resets and power sequencing, + inputs from buttons and the IR remote, LEDs, an RTC, and more. + +config MFD_LP3943 + tristate "TI/National Semiconductor LP3943 MFD Driver" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Support for the TI/National Semiconductor LP3943. + This driver consists of GPIO and PWM drivers. + With these functionalities, it can be used for LED string control or + general usage such like a GPIO controller and a PWM controller. + +config MFD_LP8788 + bool "TI LP8788 Power Management Unit Driver" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select IRQ_DOMAIN + help + TI LP8788 PMU supports regulators, battery charger, RTC, + ADC, backlight driver and current sinks. + +config MFD_OMAP_USB_HOST + bool "TI OMAP USBHS core and TLL driver" + depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 + default y + help + This is the core driver for the OAMP EHCI and OHCI drivers. + This MFD driver does the required setup functionalities for + OMAP USB Host drivers. + +config MFD_PALMAS + bool "TI Palmas series chips" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + If you say yes here you get support for the Palmas + series of PMIC chips from Texas Instruments. + +config TPS6105X + tristate "TI TPS61050/61052 Boost Converters" + depends on I2C + select REGULATOR + select MFD_CORE + select REGULATOR_FIXED_VOLTAGE + help + This option enables a driver for the TP61050/TPS61052 + high-power "white LED driver". This boost converter is + sometimes used for other things than white LEDs, and + also contains a GPIO pin. + +config TPS65010 + tristate "TI TPS6501x Power Management chips" + depends on I2C && GPIOLIB + default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK + help + If you say yes here you get support for the TPS6501x series of + Power Management chips. These include voltage regulators, + lithium ion/polymer battery charging, and other features that + are often used in portable devices like cell phones and cameras. + + This driver can also be built as a module. If so, the module + will be called tps65010. + +config TPS6507X + tristate "TI TPS6507x Power Management / Touch Screen chips" + select MFD_CORE + depends on I2C + help + If you say yes here you get support for the TPS6507x series of + Power Management / Touch Screen chips. These include voltage + regulators, lithium ion/polymer battery charging, touch screen + and other features that are often used in portable devices. + This driver can also be built as a module. If so, the module + will be called tps6507x. + +config TPS65911_COMPARATOR + tristate + +config MFD_TPS65090 + bool "TI TPS65090 Power Management chips" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the TPS65090 series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + +config MFD_TPS65217 + tristate "TI TPS65217 Power Management / White LED chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65217 series of + Power Management / White LED chips. + These include voltage regulators, lithium ion/polymer battery + charger, wled and other features that are often used in portable + devices. + + This driver can also be built as a module. If so, the module + will be called tps65217. + +config MFD_TPS65218 + tristate "TI TPS65218 Power Management chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the TPS65218 series of + Power Management chips. + These include voltage regulators, gpio and other features + that are often used in portable devices. Only regulator + component is currently supported. + + This driver can also be built as a module. If so, the module + will be called tps65218. + +config MFD_TPS6586X + bool "TI TPS6586x Power Management chips" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS6586X series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + + This driver can also be built as a module. If so, the module + will be called tps6586x. + +config MFD_TPS65910 + bool "TI TPS65910 Power Management chip" + depends on I2C=y && GPIOLIB + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + select IRQ_DOMAIN + help + if you say yes here you get support for the TPS65910 series of + Power Management chips. + +config MFD_TPS65912 + bool "TI TPS65912 Power Management chip" + depends on GPIOLIB + select MFD_CORE + help + If you say yes here you get support for the TPS65912 series of + PM chips. + +config MFD_TPS65912_I2C + bool "TI TPS65912 Power Management chip with I2C" + select MFD_CORE + select MFD_TPS65912 + depends on I2C=y && GPIOLIB + help + If you say yes here you get support for the TPS65912 series of + PM chips with I2C interface. + +config MFD_TPS65912_SPI + bool "TI TPS65912 Power Management chip with SPI" + select MFD_CORE + select MFD_TPS65912 + depends on SPI_MASTER && GPIOLIB + help + If you say yes here you get support for the TPS65912 series of + PM chips with SPI interface. + +config MFD_TPS80031 + bool "TI TPS80031/TPS80032 Power Management chips" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the Texas Instruments + TPS80031/ TPS80032 Fully Integrated Power Management with Power + Path and Battery Charger. The device provides five configurable + step-down converters, 11 general purpose LDOs, USB OTG Module, + ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with + Power Path from USB, 32K clock generator. + +config TWL4030_CORE + bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" + depends on I2C=y + select IRQ_DOMAIN + select REGMAP_I2C + help + Say yes here if you have TWL4030 / TWL6030 family chip on your board. + This core driver provides register access and IRQ handling + facilities, and registers devices for the various functions + so that function-specific drivers can bind to them. + + These multi-function chips are found on many OMAP2 and OMAP3 + boards, providing power management, RTC, GPIO, keypad, a + high speed USB OTG transceiver, an audio codec (on most + versions) and many other features. + +config TWL4030_POWER + bool "TI TWL4030 power resources" + depends on TWL4030_CORE && ARM + help + Say yes here if you want to use the power resources on the + TWL4030 family chips. Most of these resources are regulators, + which have a separate driver; some are control signals, such + as clock request handshaking. + + This driver uses board-specific data to initialize the resources + and load scripts controlling which resources are switched off/on + or reset when a sleep, wakeup or warm reset event occurs. + +config MFD_TWL4030_AUDIO + bool "TI TWL4030 Audio" + depends on TWL4030_CORE + select MFD_CORE + default n + +config TWL6040_CORE + bool "TI TWL6040 audio codec" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + default n + help + Say yes here if you want support for Texas Instruments TWL6040 audio + codec. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device (audio, vibra). + +config MENELAUS + bool "TI TWL92330/Menelaus PM chip" + depends on I2C=y && ARCH_OMAP2 + help + If you say yes here you get support for the Texas Instruments + TWL92330/Menelaus Power Management chip. This include voltage + regulators, Dual slot memory card transceivers, real-time clock + and other features that are often used in portable devices like + cell phones and PDAs. + +config MFD_WL1273_CORE + tristate "TI WL1273 FM radio" + depends on I2C + select MFD_CORE + default n + help + This is the core driver for the TI WL1273 FM radio. This MFD + driver connects the radio-wl1273 V4L2 module and the wl1273 + audio codec. + +config MFD_LM3533 + tristate "TI/National Semiconductor LM3533 Lighting Power chip" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Say yes here to enable support for National Semiconductor / TI + LM3533 Lighting Power chips. + + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the LED, + backlight or ambient-light-sensor functionality of the device. + +config MFD_TIMBERDALE + tristate "Timberdale FPGA" + select MFD_CORE + depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST) + ---help--- + This is the core driver for the timberdale FPGA. This device is a + multifunction device which exposes numerous platform devices. + + The timberdale FPGA can be found on the Intel Atom development board + for in-vehicle infontainment, called Russellville. + +config MFD_TC3589X + bool "Toshiba TC35892 and variants" + depends on I2C=y + depends on OF + select MFD_CORE + help + Support for the Toshiba TC35892 and variants I/O Expander. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + +config MFD_TMIO + bool + default n + +config MFD_T7L66XB + bool "Toshiba T7L66XB" + depends on ARM && HAVE_CLK + select MFD_CORE + select MFD_TMIO + help + Support for Toshiba Mobile IO Controller T7L66XB + +config MFD_TC6387XB + bool "Toshiba TC6387XB" + depends on ARM && HAVE_CLK + select MFD_CORE + select MFD_TMIO + help + Support for Toshiba Mobile IO Controller TC6387XB + +config MFD_TC6393XB + bool "Toshiba TC6393XB" + depends on ARM && HAVE_CLK + select GPIOLIB + select MFD_CORE + select MFD_TMIO + help + Support for Toshiba Mobile IO Controller TC6393XB + +config MFD_VX855 + tristate "VIA VX855/VX875 integrated south bridge" + depends on PCI + select MFD_CORE + help + Say yes here to enable support for various functions of the + VIA VX855/VX875 south bridge. You will need to enable the vx855_spi + and/or vx855_gpio drivers for this to do anything useful. + +config MFD_ARIZONA + select REGMAP + select REGMAP_IRQ + select MFD_CORE + bool + +config MFD_ARIZONA_I2C + tristate "Wolfson Microelectronics Arizona platform with I2C" + select MFD_ARIZONA + select MFD_CORE + select REGMAP_I2C + depends on I2C + help + Support for the Wolfson Microelectronics Arizona platform audio SoC + core functionality controlled via I2C. + +config MFD_ARIZONA_SPI + tristate "Wolfson Microelectronics Arizona platform with SPI" + select MFD_ARIZONA + select MFD_CORE + select REGMAP_SPI + depends on SPI_MASTER + help + Support for the Wolfson Microelectronics Arizona platform audio SoC + core functionality controlled via I2C. + +config MFD_WM5102 + bool "Wolfson Microelectronics WM5102" + depends on MFD_ARIZONA + help + Support for Wolfson Microelectronics WM5102 low power audio SoC + +config MFD_WM5110 + bool "Wolfson Microelectronics WM5110 and WM8280/WM8281" + depends on MFD_ARIZONA + help + Support for Wolfson Microelectronics WM5110 and WM8280/WM8281 + low power audio SoC + +config MFD_WM8997 + bool "Wolfson Microelectronics WM8997" + depends on MFD_ARIZONA + help + Support for Wolfson Microelectronics WM8997 low power audio SoC + +config MFD_WM8400 + bool "Wolfson Microelectronics WM8400" + select MFD_CORE + depends on I2C=y + select REGMAP_I2C + help + Support for the Wolfson Microelecronics WM8400 PMIC and audio + CODEC. This driver provides common support for accessing + the device, additional drivers must be enabled in order to use + the functionality of the device. + +config MFD_WM831X + bool + +config MFD_WM831X_I2C + bool "Wolfson Microelectronics WM831x/2x PMICs with I2C" + select MFD_CORE + select MFD_WM831X + select REGMAP_I2C + select IRQ_DOMAIN + depends on I2C=y + help + Support for the Wolfson Microelecronics WM831x and WM832x PMICs + when controlled using I2C. This driver provides common support + for accessing the device, additional drivers must be enabled in + order to use the functionality of the device. + +config MFD_WM831X_SPI + bool "Wolfson Microelectronics WM831x/2x PMICs with SPI" + select MFD_CORE + select MFD_WM831X + select REGMAP_SPI + select IRQ_DOMAIN + depends on SPI_MASTER + help + Support for the Wolfson Microelecronics WM831x and WM832x PMICs + when controlled using SPI. This driver provides common support + for accessing the device, additional drivers must be enabled in + order to use the functionality of the device. + +config MFD_WM8350 + bool + +config MFD_WM8350_I2C + bool "Wolfson Microelectronics WM8350 with I2C" + select MFD_WM8350 + depends on I2C=y + help + The WM8350 is an integrated audio and power management + subsystem with watchdog and RTC functionality for embedded + systems. This option enables core support for the WM8350 with + I2C as the control interface. Additional options must be + selected to enable support for the functionality of the chip. + +config MFD_WM8994 + tristate "Wolfson Microelectronics WM8994" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C + help + The WM8994 is a highly integrated hi-fi CODEC designed for + smartphone applications. As well as audio functionality it + has on board GPIO and regulator functionality which is + supported via the relevant subsystems. This driver provides + core support for the WM8994, in order to use the actual + functionaltiy of the device other drivers must be enabled. + +config MFD_STW481X + tristate "Support for ST Microelectronics STw481x" + depends on I2C && ARCH_NOMADIK + select REGMAP_I2C + select MFD_CORE + help + Select this option to enable the STw481x chip driver used + in various ST Microelectronics and ST-Ericsson embedded + Nomadik series. + +menu "Multimedia Capabilities Port drivers" + depends on ARCH_SA1100 + +config MCP + tristate + +# Interface drivers +config MCP_SA11X0 + tristate "Support SA11x0 MCP interface" + depends on ARCH_SA1100 + select MCP + +# Chip drivers +config MCP_UCB1200 + tristate "Support for UCB1200 / UCB1300" + depends on MCP_SA11X0 + select MCP + +config MCP_UCB1200_TS + tristate "Touchscreen interface support" + depends on MCP_UCB1200 && INPUT + +endmenu + +config MFD_VEXPRESS_SYSREG + bool "Versatile Express System Registers" + depends on VEXPRESS_CONFIG && GPIOLIB + default y + select CLKSRC_MMIO + select GPIO_GENERIC_PLATFORM + select MFD_CORE + select MFD_SYSCON + help + System Registers are the platform configuration block + on the ARM Ltd. Versatile Express board. + +endmenu +endif |