summaryrefslogtreecommitdiff
path: root/drivers/misc/eeprom/at24.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/eeprom/at24.c')
-rw-r--r--drivers/misc/eeprom/at24.c130
1 files changed, 70 insertions, 60 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 5d7c0900f..089d6943f 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mutex.h>
-#include <linux/sysfs.h>
#include <linux/mod_devicetable.h>
#include <linux/log2.h>
#include <linux/bitops.h>
@@ -23,6 +22,8 @@
#include <linux/of.h>
#include <linux/acpi.h>
#include <linux/i2c.h>
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
#include <linux/platform_data/at24.h>
/*
@@ -55,7 +56,6 @@
struct at24_data {
struct at24_platform_data chip;
- struct memory_accessor macc;
int use_smbus;
int use_smbus_write;
@@ -64,12 +64,15 @@ struct at24_data {
* but not from changes by other I2C masters.
*/
struct mutex lock;
- struct bin_attribute bin;
u8 *writebuf;
unsigned write_max;
unsigned num_addresses;
+ struct regmap_config regmap_config;
+ struct nvmem_config nvmem_config;
+ struct nvmem_device *nvmem;
+
/*
* Some chips tie up multiple I2C addresses; dummy devices reserve
* them for us, and we'll use them with SMBus calls.
@@ -283,17 +286,6 @@ static ssize_t at24_read(struct at24_data *at24,
return retval;
}
-static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
- return at24_read(at24, buf, off, count);
-}
-
-
/*
* Note that if the hardware write-protect pin is pulled high, the whole
* chip is normally write protected. But there are plenty of product
@@ -414,40 +406,49 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
return retval;
}
-static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
- return at24_write(at24, buf, off, count);
-}
-
/*-------------------------------------------------------------------------*/
/*
- * This lets other kernel code access the eeprom data. For example, it
- * might hold a board's Ethernet address, or board-specific calibration
- * data generated on the manufacturing floor.
- */
-
-static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf,
- off_t offset, size_t count)
+ * Provide a regmap interface, which is registered with the NVMEM
+ * framework
+*/
+static int at24_regmap_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
{
- struct at24_data *at24 = container_of(macc, struct at24_data, macc);
+ struct at24_data *at24 = context;
+ off_t offset = *(u32 *)reg;
+ int err;
- return at24_read(at24, buf, offset, count);
+ err = at24_read(at24, val, offset, val_size);
+ if (err)
+ return err;
+ return 0;
}
-static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
- off_t offset, size_t count)
+static int at24_regmap_write(void *context, const void *data, size_t count)
{
- struct at24_data *at24 = container_of(macc, struct at24_data, macc);
+ struct at24_data *at24 = context;
+ const char *buf;
+ u32 offset;
+ size_t len;
+ int err;
- return at24_write(at24, buf, offset, count);
+ memcpy(&offset, data, sizeof(offset));
+ buf = (const char *)data + sizeof(offset);
+ len = count - sizeof(offset);
+
+ err = at24_write(at24, buf, offset, len);
+ if (err)
+ return err;
+ return 0;
}
+static const struct regmap_bus at24_regmap_bus = {
+ .read = at24_regmap_read,
+ .write = at24_regmap_write,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_OF
@@ -481,6 +482,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
struct at24_data *at24;
int err;
unsigned i, num_addresses;
+ struct regmap *regmap;
if (client->dev.platform_data) {
chip = *(struct at24_platform_data *)client->dev.platform_data;
@@ -573,29 +575,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
at24->chip = chip;
at24->num_addresses = num_addresses;
- /*
- * Export the EEPROM bytes through sysfs, since that's convenient.
- * By default, only root should see the data (maybe passwords etc)
- */
- sysfs_bin_attr_init(&at24->bin);
- at24->bin.attr.name = "eeprom";
- at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
- at24->bin.read = at24_bin_read;
- at24->bin.size = chip.byte_len;
-
- at24->macc.read = at24_macc_read;
-
writable = !(chip.flags & AT24_FLAG_READONLY);
if (writable) {
if (!use_smbus || use_smbus_write) {
unsigned write_max = chip.page_size;
- at24->macc.write = at24_macc_write;
-
- at24->bin.write = at24_bin_write;
- at24->bin.attr.mode |= S_IWUSR;
-
if (write_max > io_limit)
write_max = io_limit;
if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
@@ -627,14 +612,38 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
}
}
- err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
- if (err)
+ at24->regmap_config.reg_bits = 32;
+ at24->regmap_config.val_bits = 8;
+ at24->regmap_config.reg_stride = 1;
+ at24->regmap_config.max_register = chip.byte_len - 1;
+
+ regmap = devm_regmap_init(&client->dev, &at24_regmap_bus, at24,
+ &at24->regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "regmap init failed\n");
+ err = PTR_ERR(regmap);
+ goto err_clients;
+ }
+
+ at24->nvmem_config.name = dev_name(&client->dev);
+ at24->nvmem_config.dev = &client->dev;
+ at24->nvmem_config.read_only = !writable;
+ at24->nvmem_config.root_only = true;
+ at24->nvmem_config.owner = THIS_MODULE;
+ at24->nvmem_config.compat = true;
+ at24->nvmem_config.base_dev = &client->dev;
+
+ at24->nvmem = nvmem_register(&at24->nvmem_config);
+
+ if (IS_ERR(at24->nvmem)) {
+ err = PTR_ERR(at24->nvmem);
goto err_clients;
+ }
i2c_set_clientdata(client, at24);
- dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n",
- at24->bin.size, client->name,
+ dev_info(&client->dev, "%u byte %s EEPROM, %s, %u bytes/write\n",
+ chip.byte_len, client->name,
writable ? "writable" : "read-only", at24->write_max);
if (use_smbus == I2C_SMBUS_WORD_DATA ||
use_smbus == I2C_SMBUS_BYTE_DATA) {
@@ -645,7 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
/* export data to kernel code */
if (chip.setup)
- chip.setup(&at24->macc, chip.context);
+ chip.setup(at24->nvmem, chip.context);
return 0;
@@ -663,7 +672,8 @@ static int at24_remove(struct i2c_client *client)
int i;
at24 = i2c_get_clientdata(client);
- sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
+
+ nvmem_unregister(at24->nvmem);
for (i = 1; i < at24->num_addresses; i++)
i2c_unregister_device(at24->client[i]);