summaryrefslogtreecommitdiff
path: root/drivers/misc/mei/hw-me.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/mei/hw-me.c')
-rw-r--r--drivers/misc/mei/hw-me.c499
1 files changed, 425 insertions, 74 deletions
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 43d7101ff..65511d39d 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -134,11 +134,40 @@ static inline void mei_hcsr_write(struct mei_device *dev, u32 reg)
*/
static inline void mei_hcsr_set(struct mei_device *dev, u32 reg)
{
- reg &= ~H_IS;
+ reg &= ~H_CSR_IS_MASK;
mei_hcsr_write(dev, reg);
}
/**
+ * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register
+ *
+ * @dev: the device structure
+ *
+ * Return: H_D0I3C register value (u32)
+ */
+static inline u32 mei_me_d0i3c_read(const struct mei_device *dev)
+{
+ u32 reg;
+
+ reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C);
+ trace_mei_reg_read(dev->dev, "H_D0I3C", H_CSR, reg);
+
+ return reg;
+}
+
+/**
+ * mei_me_d0i3c_write - writes H_D0I3C register to device
+ *
+ * @dev: the device structure
+ * @reg: new register value
+ */
+static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg)
+{
+ trace_mei_reg_write(dev->dev, "H_D0I3C", H_CSR, reg);
+ mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg);
+}
+
+/**
* mei_me_fw_status - read fw status register from pci config space
*
* @dev: mei device
@@ -176,12 +205,25 @@ static int mei_me_fw_status(struct mei_device *dev,
*/
static void mei_me_hw_config(struct mei_device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
struct mei_me_hw *hw = to_me_hw(dev);
- u32 hcsr = mei_hcsr_read(dev);
+ u32 hcsr, reg;
+
/* Doesn't change in runtime */
+ hcsr = mei_hcsr_read(dev);
dev->hbuf_depth = (hcsr & H_CBD) >> 24;
+ reg = 0;
+ pci_read_config_dword(pdev, PCI_CFG_HFS_1, &reg);
+ hw->d0i3_supported =
+ ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK);
+
hw->pg_state = MEI_PG_OFF;
+ if (hw->d0i3_supported) {
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3)
+ hw->pg_state = MEI_PG_ON;
+ }
}
/**
@@ -208,7 +250,7 @@ static void mei_me_intr_clear(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
- if ((hcsr & H_IS) == H_IS)
+ if (hcsr & H_CSR_IS_MASK)
mei_hcsr_write(dev, hcsr);
}
/**
@@ -220,7 +262,7 @@ static void mei_me_intr_enable(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
- hcsr |= H_IE;
+ hcsr |= H_CSR_IE_MASK;
mei_hcsr_set(dev, hcsr);
}
@@ -233,7 +275,7 @@ static void mei_me_intr_disable(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
- hcsr &= ~H_IE;
+ hcsr &= ~H_CSR_IE_MASK;
mei_hcsr_set(dev, hcsr);
}
@@ -253,57 +295,6 @@ static void mei_me_hw_reset_release(struct mei_device *dev)
/* complete this write before we set host ready on another CPU */
mmiowb();
}
-/**
- * mei_me_hw_reset - resets fw via mei csr register.
- *
- * @dev: the device structure
- * @intr_enable: if interrupt should be enabled after reset.
- *
- * Return: always 0
- */
-static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
-{
- u32 hcsr = mei_hcsr_read(dev);
-
- /* H_RST may be found lit before reset is started,
- * for example if preceding reset flow hasn't completed.
- * In that case asserting H_RST will be ignored, therefore
- * we need to clean H_RST bit to start a successful reset sequence.
- */
- if ((hcsr & H_RST) == H_RST) {
- dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
- hcsr &= ~H_RST;
- mei_hcsr_set(dev, hcsr);
- hcsr = mei_hcsr_read(dev);
- }
-
- hcsr |= H_RST | H_IG | H_IS;
-
- if (intr_enable)
- hcsr |= H_IE;
- else
- hcsr &= ~H_IE;
-
- dev->recvd_hw_ready = false;
- mei_hcsr_write(dev, hcsr);
-
- /*
- * Host reads the H_CSR once to ensure that the
- * posted write to H_CSR completes.
- */
- hcsr = mei_hcsr_read(dev);
-
- if ((hcsr & H_RST) == 0)
- dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);
-
- if ((hcsr & H_RDY) == H_RDY)
- dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);
-
- if (intr_enable == false)
- mei_me_hw_reset_release(dev);
-
- return 0;
-}
/**
* mei_me_host_set_ready - enable device
@@ -314,7 +305,7 @@ static void mei_me_host_set_ready(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
- hcsr |= H_IE | H_IG | H_RDY;
+ hcsr |= H_CSR_IE_MASK | H_IG | H_RDY;
mei_hcsr_set(dev, hcsr);
}
@@ -601,13 +592,13 @@ static void mei_me_pg_unset(struct mei_device *dev)
}
/**
- * mei_me_pg_enter_sync - perform pg entry procedure
+ * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
-int mei_me_pg_enter_sync(struct mei_device *dev)
+static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
@@ -638,13 +629,13 @@ int mei_me_pg_enter_sync(struct mei_device *dev)
}
/**
- * mei_me_pg_exit_sync - perform pg exit procedure
+ * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
-int mei_me_pg_exit_sync(struct mei_device *dev)
+static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
@@ -712,8 +703,12 @@ static bool mei_me_pg_in_transition(struct mei_device *dev)
*/
static bool mei_me_pg_is_enabled(struct mei_device *dev)
{
+ struct mei_me_hw *hw = to_me_hw(dev);
u32 reg = mei_me_mecsr_read(dev);
+ if (hw->d0i3_supported)
+ return true;
+
if ((reg & ME_PGIC_HRA) == 0)
goto notsupported;
@@ -723,7 +718,8 @@ static bool mei_me_pg_is_enabled(struct mei_device *dev)
return true;
notsupported:
- dev_dbg(dev->dev, "pg: not supported: HGP = %d hbm version %d.%d ?= %d.%d\n",
+ dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n",
+ hw->d0i3_supported,
!!(reg & ME_PGIC_HRA),
dev->version.major_version,
dev->version.minor_version,
@@ -734,11 +730,211 @@ notsupported:
}
/**
- * mei_me_pg_intr - perform pg processing in interrupt thread handler
+ * mei_me_d0i3_set - write d0i3 register bit on mei device.
*
* @dev: the device structure
+ * @intr: ask for interrupt
+ *
+ * Return: D0I3C register value
*/
-static void mei_me_pg_intr(struct mei_device *dev)
+static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr)
+{
+ u32 reg = mei_me_d0i3c_read(dev);
+
+ reg |= H_D0I3C_I3;
+ if (intr)
+ reg |= H_D0I3C_IR;
+ else
+ reg &= ~H_D0I3C_IR;
+ mei_me_d0i3c_write(dev, reg);
+ /* read it to ensure HW consistency */
+ reg = mei_me_d0i3c_read(dev);
+ return reg;
+}
+
+/**
+ * mei_me_d0i3_unset - clean d0i3 register bit on mei device.
+ *
+ * @dev: the device structure
+ *
+ * Return: D0I3C register value
+ */
+static u32 mei_me_d0i3_unset(struct mei_device *dev)
+{
+ u32 reg = mei_me_d0i3c_read(dev);
+
+ reg &= ~H_D0I3C_I3;
+ reg |= H_D0I3C_IR;
+ mei_me_d0i3c_write(dev, reg);
+ /* read it to ensure HW consistency */
+ reg = mei_me_d0i3c_read(dev);
+ return reg;
+}
+
+/**
+ * mei_me_d0i3_enter_sync - perform d0i3 entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+ unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ int ret;
+ u32 reg;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ /* we are in d0i3, nothing to do */
+ dev_dbg(dev->dev, "d0i3 set not needed\n");
+ ret = 0;
+ goto on;
+ }
+
+ /* PGI entry procedure */
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+
+ ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
+ if (ret)
+ /* FIXME: should we reset here? */
+ goto out;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+ ret = -ETIME;
+ goto out;
+ }
+ /* end PGI entry procedure */
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+
+ reg = mei_me_d0i3_set(dev, true);
+ if (!(reg & H_D0I3C_CIP)) {
+ dev_dbg(dev->dev, "d0i3 enter wait not needed\n");
+ ret = 0;
+ goto on;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
+ reg = mei_me_d0i3c_read(dev);
+ if (!(reg & H_D0I3C_I3)) {
+ ret = -ETIME;
+ goto out;
+ }
+ }
+
+ ret = 0;
+on:
+ hw->pg_state = MEI_PG_ON;
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret);
+ return ret;
+}
+
+/**
+ * mei_me_d0i3_enter - perform d0i3 entry procedure
+ * no hbm PG handshake
+ * no waiting for confirmation; runs with interrupts
+ * disabled
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_enter(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ /* we are in d0i3, nothing to do */
+ dev_dbg(dev->dev, "already d0i3 : set not needed\n");
+ goto on;
+ }
+
+ mei_me_d0i3_set(dev, false);
+on:
+ hw->pg_state = MEI_PG_ON;
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_dbg(dev->dev, "d0i3 enter\n");
+ return 0;
+}
+
+/**
+ * mei_me_d0i3_exit_sync - perform d0i3 exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+ int ret;
+ u32 reg;
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (!(reg & H_D0I3C_I3)) {
+ /* we are not in d0i3, nothing to do */
+ dev_dbg(dev->dev, "d0i3 exit not needed\n");
+ ret = 0;
+ goto off;
+ }
+
+ reg = mei_me_d0i3_unset(dev);
+ if (!(reg & H_D0I3C_CIP)) {
+ dev_dbg(dev->dev, "d0i3 exit wait not needed\n");
+ ret = 0;
+ goto off;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ ret = -ETIME;
+ goto out;
+ }
+ }
+
+ ret = 0;
+off:
+ hw->pg_state = MEI_PG_OFF;
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+
+ dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret);
+ return ret;
+}
+
+/**
+ * mei_me_pg_legacy_intr - perform legacy pg processing
+ * in interrupt thread handler
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_legacy_intr(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
@@ -752,6 +948,162 @@ static void mei_me_pg_intr(struct mei_device *dev)
}
/**
+ * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler
+ *
+ * @dev: the device structure
+ */
+static void mei_me_d0i3_intr(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT &&
+ (hw->intr_source & H_D0I3C_IS)) {
+ dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
+ if (hw->pg_state == MEI_PG_ON) {
+ hw->pg_state = MEI_PG_OFF;
+ if (dev->hbm_state != MEI_HBM_IDLE) {
+ /*
+ * force H_RDY because it could be
+ * wiped off during PG
+ */
+ dev_dbg(dev->dev, "d0i3 set host ready\n");
+ mei_me_host_set_ready(dev);
+ }
+ } else {
+ hw->pg_state = MEI_PG_ON;
+ }
+
+ wake_up(&dev->wait_pg);
+ }
+
+ if (hw->pg_state == MEI_PG_ON && (hw->intr_source & H_IS)) {
+ /*
+ * HW sent some data and we are in D0i3, so
+ * we got here because of HW initiated exit from D0i3.
+ * Start runtime pm resume sequence to exit low power state.
+ */
+ dev_dbg(dev->dev, "d0i3 want resume\n");
+ mei_hbm_pg_resume(dev);
+ }
+}
+
+/**
+ * mei_me_pg_intr - perform pg processing in interrupt thread handler
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_intr(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ mei_me_d0i3_intr(dev);
+ else
+ mei_me_pg_legacy_intr(dev);
+}
+
+/**
+ * mei_me_pg_enter_sync - perform runtime pm entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_me_pg_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ return mei_me_d0i3_enter_sync(dev);
+ else
+ return mei_me_pg_legacy_enter_sync(dev);
+}
+
+/**
+ * mei_me_pg_exit_sync - perform runtime pm exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_me_pg_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ return mei_me_d0i3_exit_sync(dev);
+ else
+ return mei_me_pg_legacy_exit_sync(dev);
+}
+
+/**
+ * mei_me_hw_reset - resets fw via mei csr register.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ int ret;
+ u32 hcsr;
+
+ if (intr_enable) {
+ mei_me_intr_enable(dev);
+ if (hw->d0i3_supported) {
+ ret = mei_me_d0i3_exit_sync(dev);
+ if (ret)
+ return ret;
+ }
+ }
+
+ hcsr = mei_hcsr_read(dev);
+ /* H_RST may be found lit before reset is started,
+ * for example if preceding reset flow hasn't completed.
+ * In that case asserting H_RST will be ignored, therefore
+ * we need to clean H_RST bit to start a successful reset sequence.
+ */
+ if ((hcsr & H_RST) == H_RST) {
+ dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
+ hcsr &= ~H_RST;
+ mei_hcsr_set(dev, hcsr);
+ hcsr = mei_hcsr_read(dev);
+ }
+
+ hcsr |= H_RST | H_IG | H_CSR_IS_MASK;
+
+ if (!intr_enable)
+ hcsr &= ~H_CSR_IE_MASK;
+
+ dev->recvd_hw_ready = false;
+ mei_hcsr_write(dev, hcsr);
+
+ /*
+ * Host reads the H_CSR once to ensure that the
+ * posted write to H_CSR completes.
+ */
+ hcsr = mei_hcsr_read(dev);
+
+ if ((hcsr & H_RST) == 0)
+ dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);
+
+ if ((hcsr & H_RDY) == H_RDY)
+ dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);
+
+ if (!intr_enable) {
+ mei_me_hw_reset_release(dev);
+ if (hw->d0i3_supported) {
+ ret = mei_me_d0i3_enter(dev);
+ if (ret)
+ return ret;
+ }
+ }
+ return 0;
+}
+
+/**
* mei_me_irq_quick_handler - The ISR of the MEI device
*
* @irq: The irq number
@@ -759,16 +1111,20 @@ static void mei_me_pg_intr(struct mei_device *dev)
*
* Return: irqreturn_t
*/
-
irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
{
- struct mei_device *dev = (struct mei_device *) dev_id;
- u32 hcsr = mei_hcsr_read(dev);
+ struct mei_device *dev = (struct mei_device *)dev_id;
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 hcsr;
- if ((hcsr & H_IS) != H_IS)
+ hcsr = mei_hcsr_read(dev);
+ if (!(hcsr & H_CSR_IS_MASK))
return IRQ_NONE;
- /* clear H_IS bit in H_CSR */
+ hw->intr_source = hcsr & H_CSR_IS_MASK;
+ dev_dbg(dev->dev, "interrupt source 0x%08X.\n", hw->intr_source);
+
+ /* clear H_IS and H_D0I3C_IS bits in H_CSR to clear the interrupts */
mei_hcsr_write(dev, hcsr);
return IRQ_WAKE_THREAD;
@@ -796,11 +1152,6 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
mutex_lock(&dev->device_lock);
mei_io_list_init(&complete_list);
- /* Ack the interrupt here
- * In case of MSI we don't go through the quick handler */
- if (pci_dev_msi_enabled(to_pci_dev(dev->dev)))
- mei_clear_interrupts(dev);
-
/* check if ME wants a reset */
if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) {
dev_warn(dev->dev, "FW not ready: resetting.\n");