diff options
Diffstat (limited to 'drivers/misc/mei/hw-me.c')
| -rw-r--r-- | drivers/misc/mei/hw-me.c | 499 |
1 files changed, 425 insertions, 74 deletions
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 43d7101ff..65511d39d 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -134,11 +134,40 @@ static inline void mei_hcsr_write(struct mei_device *dev, u32 reg) */ static inline void mei_hcsr_set(struct mei_device *dev, u32 reg) { - reg &= ~H_IS; + reg &= ~H_CSR_IS_MASK; mei_hcsr_write(dev, reg); } /** + * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register + * + * @dev: the device structure + * + * Return: H_D0I3C register value (u32) + */ +static inline u32 mei_me_d0i3c_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C); + trace_mei_reg_read(dev->dev, "H_D0I3C", H_CSR, reg); + + return reg; +} + +/** + * mei_me_d0i3c_write - writes H_D0I3C register to device + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg) +{ + trace_mei_reg_write(dev->dev, "H_D0I3C", H_CSR, reg); + mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg); +} + +/** * mei_me_fw_status - read fw status register from pci config space * * @dev: mei device @@ -176,12 +205,25 @@ static int mei_me_fw_status(struct mei_device *dev, */ static void mei_me_hw_config(struct mei_device *dev) { + struct pci_dev *pdev = to_pci_dev(dev->dev); struct mei_me_hw *hw = to_me_hw(dev); - u32 hcsr = mei_hcsr_read(dev); + u32 hcsr, reg; + /* Doesn't change in runtime */ + hcsr = mei_hcsr_read(dev); dev->hbuf_depth = (hcsr & H_CBD) >> 24; + reg = 0; + pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®); + hw->d0i3_supported = + ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK); + hw->pg_state = MEI_PG_OFF; + if (hw->d0i3_supported) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) + hw->pg_state = MEI_PG_ON; + } } /** @@ -208,7 +250,7 @@ static void mei_me_intr_clear(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - if ((hcsr & H_IS) == H_IS) + if (hcsr & H_CSR_IS_MASK) mei_hcsr_write(dev, hcsr); } /** @@ -220,7 +262,7 @@ static void mei_me_intr_enable(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - hcsr |= H_IE; + hcsr |= H_CSR_IE_MASK; mei_hcsr_set(dev, hcsr); } @@ -233,7 +275,7 @@ static void mei_me_intr_disable(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - hcsr &= ~H_IE; + hcsr &= ~H_CSR_IE_MASK; mei_hcsr_set(dev, hcsr); } @@ -253,57 +295,6 @@ static void mei_me_hw_reset_release(struct mei_device *dev) /* complete this write before we set host ready on another CPU */ mmiowb(); } -/** - * mei_me_hw_reset - resets fw via mei csr register. - * - * @dev: the device structure - * @intr_enable: if interrupt should be enabled after reset. - * - * Return: always 0 - */ -static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) -{ - u32 hcsr = mei_hcsr_read(dev); - - /* H_RST may be found lit before reset is started, - * for example if preceding reset flow hasn't completed. - * In that case asserting H_RST will be ignored, therefore - * we need to clean H_RST bit to start a successful reset sequence. - */ - if ((hcsr & H_RST) == H_RST) { - dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr); - hcsr &= ~H_RST; - mei_hcsr_set(dev, hcsr); - hcsr = mei_hcsr_read(dev); - } - - hcsr |= H_RST | H_IG | H_IS; - - if (intr_enable) - hcsr |= H_IE; - else - hcsr &= ~H_IE; - - dev->recvd_hw_ready = false; - mei_hcsr_write(dev, hcsr); - - /* - * Host reads the H_CSR once to ensure that the - * posted write to H_CSR completes. - */ - hcsr = mei_hcsr_read(dev); - - if ((hcsr & H_RST) == 0) - dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr); - - if ((hcsr & H_RDY) == H_RDY) - dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr); - - if (intr_enable == false) - mei_me_hw_reset_release(dev); - - return 0; -} /** * mei_me_host_set_ready - enable device @@ -314,7 +305,7 @@ static void mei_me_host_set_ready(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); - hcsr |= H_IE | H_IG | H_RDY; + hcsr |= H_CSR_IE_MASK | H_IG | H_RDY; mei_hcsr_set(dev, hcsr); } @@ -601,13 +592,13 @@ static void mei_me_pg_unset(struct mei_device *dev) } /** - * mei_me_pg_enter_sync - perform pg entry procedure + * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure * * @dev: the device structure * * Return: 0 on success an error code otherwise */ -int mei_me_pg_enter_sync(struct mei_device *dev) +static int mei_me_pg_legacy_enter_sync(struct mei_device *dev) { struct mei_me_hw *hw = to_me_hw(dev); unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT); @@ -638,13 +629,13 @@ int mei_me_pg_enter_sync(struct mei_device *dev) } /** - * mei_me_pg_exit_sync - perform pg exit procedure + * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure * * @dev: the device structure * * Return: 0 on success an error code otherwise */ -int mei_me_pg_exit_sync(struct mei_device *dev) +static int mei_me_pg_legacy_exit_sync(struct mei_device *dev) { struct mei_me_hw *hw = to_me_hw(dev); unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT); @@ -712,8 +703,12 @@ static bool mei_me_pg_in_transition(struct mei_device *dev) */ static bool mei_me_pg_is_enabled(struct mei_device *dev) { + struct mei_me_hw *hw = to_me_hw(dev); u32 reg = mei_me_mecsr_read(dev); + if (hw->d0i3_supported) + return true; + if ((reg & ME_PGIC_HRA) == 0) goto notsupported; @@ -723,7 +718,8 @@ static bool mei_me_pg_is_enabled(struct mei_device *dev) return true; notsupported: - dev_dbg(dev->dev, "pg: not supported: HGP = %d hbm version %d.%d ?= %d.%d\n", + dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n", + hw->d0i3_supported, !!(reg & ME_PGIC_HRA), dev->version.major_version, dev->version.minor_version, @@ -734,11 +730,211 @@ notsupported: } /** - * mei_me_pg_intr - perform pg processing in interrupt thread handler + * mei_me_d0i3_set - write d0i3 register bit on mei device. * * @dev: the device structure + * @intr: ask for interrupt + * + * Return: D0I3C register value */ -static void mei_me_pg_intr(struct mei_device *dev) +static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg |= H_D0I3C_I3; + if (intr) + reg |= H_D0I3C_IR; + else + reg &= ~H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_unset - clean d0i3 register bit on mei device. + * + * @dev: the device structure + * + * Return: D0I3C register value + */ +static u32 mei_me_d0i3_unset(struct mei_device *dev) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg &= ~H_D0I3C_I3; + reg |= H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_enter_sync - perform d0i3 entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT); + unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT); + int ret; + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 set not needed\n"); + ret = 0; + goto on; + } + + /* PGI entry procedure */ + dev->pg_event = MEI_PG_EVENT_WAIT; + + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD); + if (ret) + /* FIXME: should we reset here? */ + goto out; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_RECEIVED) { + ret = -ETIME; + goto out; + } + /* end PGI entry procedure */ + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3_set(dev, true); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 enter wait not needed\n"); + ret = 0; + goto on; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +on: + hw->pg_state = MEI_PG_ON; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret); + return ret; +} + +/** + * mei_me_d0i3_enter - perform d0i3 entry procedure + * no hbm PG handshake + * no waiting for confirmation; runs with interrupts + * disabled + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "already d0i3 : set not needed\n"); + goto on; + } + + mei_me_d0i3_set(dev, false); +on: + hw->pg_state = MEI_PG_ON; + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter\n"); + return 0; +} + +/** + * mei_me_d0i3_exit_sync - perform d0i3 exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT); + int ret; + u32 reg; + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + /* we are not in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 exit not needed\n"); + ret = 0; + goto off; + } + + reg = mei_me_d0i3_unset(dev); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 exit wait not needed\n"); + ret = 0; + goto off; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +off: + hw->pg_state = MEI_PG_OFF; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + + dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret); + return ret; +} + +/** + * mei_me_pg_legacy_intr - perform legacy pg processing + * in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_pg_legacy_intr(struct mei_device *dev) { struct mei_me_hw *hw = to_me_hw(dev); @@ -752,6 +948,162 @@ static void mei_me_pg_intr(struct mei_device *dev) } /** + * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_d0i3_intr(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT && + (hw->intr_source & H_D0I3C_IS)) { + dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED; + if (hw->pg_state == MEI_PG_ON) { + hw->pg_state = MEI_PG_OFF; + if (dev->hbm_state != MEI_HBM_IDLE) { + /* + * force H_RDY because it could be + * wiped off during PG + */ + dev_dbg(dev->dev, "d0i3 set host ready\n"); + mei_me_host_set_ready(dev); + } + } else { + hw->pg_state = MEI_PG_ON; + } + + wake_up(&dev->wait_pg); + } + + if (hw->pg_state == MEI_PG_ON && (hw->intr_source & H_IS)) { + /* + * HW sent some data and we are in D0i3, so + * we got here because of HW initiated exit from D0i3. + * Start runtime pm resume sequence to exit low power state. + */ + dev_dbg(dev->dev, "d0i3 want resume\n"); + mei_hbm_pg_resume(dev); + } +} + +/** + * mei_me_pg_intr - perform pg processing in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_pg_intr(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + mei_me_d0i3_intr(dev); + else + mei_me_pg_legacy_intr(dev); +} + +/** + * mei_me_pg_enter_sync - perform runtime pm entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_enter_sync(dev); + else + return mei_me_pg_legacy_enter_sync(dev); +} + +/** + * mei_me_pg_exit_sync - perform runtime pm exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_exit_sync(dev); + else + return mei_me_pg_legacy_exit_sync(dev); +} + +/** + * mei_me_hw_reset - resets fw via mei csr register. + * + * @dev: the device structure + * @intr_enable: if interrupt should be enabled after reset. + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 hcsr; + + if (intr_enable) { + mei_me_intr_enable(dev); + if (hw->d0i3_supported) { + ret = mei_me_d0i3_exit_sync(dev); + if (ret) + return ret; + } + } + + hcsr = mei_hcsr_read(dev); + /* H_RST may be found lit before reset is started, + * for example if preceding reset flow hasn't completed. + * In that case asserting H_RST will be ignored, therefore + * we need to clean H_RST bit to start a successful reset sequence. + */ + if ((hcsr & H_RST) == H_RST) { + dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr); + hcsr &= ~H_RST; + mei_hcsr_set(dev, hcsr); + hcsr = mei_hcsr_read(dev); + } + + hcsr |= H_RST | H_IG | H_CSR_IS_MASK; + + if (!intr_enable) + hcsr &= ~H_CSR_IE_MASK; + + dev->recvd_hw_ready = false; + mei_hcsr_write(dev, hcsr); + + /* + * Host reads the H_CSR once to ensure that the + * posted write to H_CSR completes. + */ + hcsr = mei_hcsr_read(dev); + + if ((hcsr & H_RST) == 0) + dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr); + + if ((hcsr & H_RDY) == H_RDY) + dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr); + + if (!intr_enable) { + mei_me_hw_reset_release(dev); + if (hw->d0i3_supported) { + ret = mei_me_d0i3_enter(dev); + if (ret) + return ret; + } + } + return 0; +} + +/** * mei_me_irq_quick_handler - The ISR of the MEI device * * @irq: The irq number @@ -759,16 +1111,20 @@ static void mei_me_pg_intr(struct mei_device *dev) * * Return: irqreturn_t */ - irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id) { - struct mei_device *dev = (struct mei_device *) dev_id; - u32 hcsr = mei_hcsr_read(dev); + struct mei_device *dev = (struct mei_device *)dev_id; + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr; - if ((hcsr & H_IS) != H_IS) + hcsr = mei_hcsr_read(dev); + if (!(hcsr & H_CSR_IS_MASK)) return IRQ_NONE; - /* clear H_IS bit in H_CSR */ + hw->intr_source = hcsr & H_CSR_IS_MASK; + dev_dbg(dev->dev, "interrupt source 0x%08X.\n", hw->intr_source); + + /* clear H_IS and H_D0I3C_IS bits in H_CSR to clear the interrupts */ mei_hcsr_write(dev, hcsr); return IRQ_WAKE_THREAD; @@ -796,11 +1152,6 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) mutex_lock(&dev->device_lock); mei_io_list_init(&complete_list); - /* Ack the interrupt here - * In case of MSI we don't go through the quick handler */ - if (pci_dev_msi_enabled(to_pci_dev(dev->dev))) - mei_clear_interrupts(dev); - /* check if ME wants a reset */ if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) { dev_warn(dev->dev, "FW not ready: resetting.\n"); |