diff options
Diffstat (limited to 'drivers/mmc/core/sdio_io.c')
| -rw-r--r-- | drivers/mmc/core/sdio_io.c | 722 |
1 files changed, 722 insertions, 0 deletions
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c new file mode 100644 index 000000000..78cb4d5d9 --- /dev/null +++ b/drivers/mmc/core/sdio_io.c @@ -0,0 +1,722 @@ +/* + * linux/drivers/mmc/core/sdio_io.c + * + * Copyright 2007-2008 Pierre Ossman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/export.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_func.h> + +#include "sdio_ops.h" + +/** + * sdio_claim_host - exclusively claim a bus for a certain SDIO function + * @func: SDIO function that will be accessed + * + * Claim a bus for a set of operations. The SDIO function given + * is used to figure out which bus is relevant. + */ +void sdio_claim_host(struct sdio_func *func) +{ + BUG_ON(!func); + BUG_ON(!func->card); + + mmc_claim_host(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_claim_host); + +/** + * sdio_release_host - release a bus for a certain SDIO function + * @func: SDIO function that was accessed + * + * Release a bus, allowing others to claim the bus for their + * operations. + */ +void sdio_release_host(struct sdio_func *func) +{ + BUG_ON(!func); + BUG_ON(!func->card); + + mmc_release_host(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_release_host); + +/** + * sdio_enable_func - enables a SDIO function for usage + * @func: SDIO function to enable + * + * Powers up and activates a SDIO function so that register + * access is possible. + */ +int sdio_enable_func(struct sdio_func *func) +{ + int ret; + unsigned char reg; + unsigned long timeout; + + BUG_ON(!func); + BUG_ON(!func->card); + + pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func)); + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®); + if (ret) + goto err; + + reg |= 1 << func->num; + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL); + if (ret) + goto err; + + timeout = jiffies + msecs_to_jiffies(func->enable_timeout); + + while (1) { + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®); + if (ret) + goto err; + if (reg & (1 << func->num)) + break; + ret = -ETIME; + if (time_after(jiffies, timeout)) + goto err; + } + + pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func)); + + return 0; + +err: + pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func)); + return ret; +} +EXPORT_SYMBOL_GPL(sdio_enable_func); + +/** + * sdio_disable_func - disable a SDIO function + * @func: SDIO function to disable + * + * Powers down and deactivates a SDIO function. Register access + * to this function will fail until the function is reenabled. + */ +int sdio_disable_func(struct sdio_func *func) +{ + int ret; + unsigned char reg; + + BUG_ON(!func); + BUG_ON(!func->card); + + pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func)); + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®); + if (ret) + goto err; + + reg &= ~(1 << func->num); + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL); + if (ret) + goto err; + + pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func)); + + return 0; + +err: + pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func)); + return -EIO; +} +EXPORT_SYMBOL_GPL(sdio_disable_func); + +/** + * sdio_set_block_size - set the block size of an SDIO function + * @func: SDIO function to change + * @blksz: new block size or 0 to use the default. + * + * The default block size is the largest supported by both the function + * and the host, with a maximum of 512 to ensure that arbitrarily sized + * data transfer use the optimal (least) number of commands. + * + * A driver may call this to override the default block size set by the + * core. This can be used to set a block size greater than the maximum + * that reported by the card; it is the driver's responsibility to ensure + * it uses a value that the card supports. + * + * Returns 0 on success, -EINVAL if the host does not support the + * requested block size, or -EIO (etc.) if one of the resultant FBR block + * size register writes failed. + * + */ +int sdio_set_block_size(struct sdio_func *func, unsigned blksz) +{ + int ret; + + if (blksz > func->card->host->max_blk_size) + return -EINVAL; + + if (blksz == 0) { + blksz = min(func->max_blksize, func->card->host->max_blk_size); + blksz = min(blksz, 512u); + } + + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE, + blksz & 0xff, NULL); + if (ret) + return ret; + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1, + (blksz >> 8) & 0xff, NULL); + if (ret) + return ret; + func->cur_blksize = blksz; + return 0; +} +EXPORT_SYMBOL_GPL(sdio_set_block_size); + +/* + * Calculate the maximum byte mode transfer size + */ +static inline unsigned int sdio_max_byte_size(struct sdio_func *func) +{ + unsigned mval = func->card->host->max_blk_size; + + if (mmc_blksz_for_byte_mode(func->card)) + mval = min(mval, func->cur_blksize); + else + mval = min(mval, func->max_blksize); + + if (mmc_card_broken_byte_mode_512(func->card)) + return min(mval, 511u); + + return min(mval, 512u); /* maximum size for byte mode */ +} + +/** + * sdio_align_size - pads a transfer size to a more optimal value + * @func: SDIO function + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * If possible, it will also adjust the size so that it can be + * handled in just a single request. + * + * Returns the improved size, which might be unmodified. + */ +unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) +{ + unsigned int orig_sz; + unsigned int blk_sz, byte_sz; + unsigned chunk_sz; + + orig_sz = sz; + + /* + * Do a first check with the controller, in case it + * wants to increase the size up to a point where it + * might need more than one block. + */ + sz = mmc_align_data_size(func->card, sz); + + /* + * If we can still do this with just a byte transfer, then + * we're done. + */ + if (sz <= sdio_max_byte_size(func)) + return sz; + + if (func->card->cccr.multi_block) { + /* + * Check if the transfer is already block aligned + */ + if ((sz % func->cur_blksize) == 0) + return sz; + + /* + * Realign it so that it can be done with one request, + * and recheck if the controller still likes it. + */ + blk_sz = ((sz + func->cur_blksize - 1) / + func->cur_blksize) * func->cur_blksize; + blk_sz = mmc_align_data_size(func->card, blk_sz); + + /* + * This value is only good if it is still just + * one request. + */ + if ((blk_sz % func->cur_blksize) == 0) + return blk_sz; + + /* + * We failed to do one request, but at least try to + * pad the remainder properly. + */ + byte_sz = mmc_align_data_size(func->card, + sz % func->cur_blksize); + if (byte_sz <= sdio_max_byte_size(func)) { + blk_sz = sz / func->cur_blksize; + return blk_sz * func->cur_blksize + byte_sz; + } + } else { + /* + * We need multiple requests, so first check that the + * controller can handle the chunk size; + */ + chunk_sz = mmc_align_data_size(func->card, + sdio_max_byte_size(func)); + if (chunk_sz == sdio_max_byte_size(func)) { + /* + * Fix up the size of the remainder (if any) + */ + byte_sz = orig_sz % chunk_sz; + if (byte_sz) { + byte_sz = mmc_align_data_size(func->card, + byte_sz); + } + + return (orig_sz / chunk_sz) * chunk_sz + byte_sz; + } + } + + /* + * The controller is simply incapable of transferring the size + * we want in decent manner, so just return the original size. + */ + return orig_sz; +} +EXPORT_SYMBOL_GPL(sdio_align_size); + +/* Split an arbitrarily sized data transfer into several + * IO_RW_EXTENDED commands. */ +static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, + unsigned addr, int incr_addr, u8 *buf, unsigned size) +{ + unsigned remainder = size; + unsigned max_blocks; + int ret; + + /* Do the bulk of the transfer using block mode (if supported). */ + if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) { + /* Blocks per command is limited by host count, host transfer + * size and the maximum for IO_RW_EXTENDED of 511 blocks. */ + max_blocks = min(func->card->host->max_blk_count, 511u); + + while (remainder >= func->cur_blksize) { + unsigned blocks; + + blocks = remainder / func->cur_blksize; + if (blocks > max_blocks) + blocks = max_blocks; + size = blocks * func->cur_blksize; + + ret = mmc_io_rw_extended(func->card, write, + func->num, addr, incr_addr, buf, + blocks, func->cur_blksize); + if (ret) + return ret; + + remainder -= size; + buf += size; + if (incr_addr) + addr += size; + } + } + + /* Write the remainder using byte mode. */ + while (remainder > 0) { + size = min(remainder, sdio_max_byte_size(func)); + + /* Indicate byte mode by setting "blocks" = 0 */ + ret = mmc_io_rw_extended(func->card, write, func->num, addr, + incr_addr, buf, 0, size); + if (ret) + return ret; + + remainder -= size; + buf += size; + if (incr_addr) + addr += size; + } + return 0; +} + +/** + * sdio_readb - read a single byte from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a single byte from the address space of a given SDIO + * function. If there is a problem reading the address, 0xff + * is returned and @err_ret will contain the error code. + */ +u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret) +{ + int ret; + u8 val; + + BUG_ON(!func); + + if (err_ret) + *err_ret = 0; + + ret = mmc_io_rw_direct(func->card, 0, func->num, addr, 0, &val); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFF; + } + + return val; +} +EXPORT_SYMBOL_GPL(sdio_readb); + +/** + * sdio_writeb - write a single byte to a SDIO function + * @func: SDIO function to access + * @b: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a single byte to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret) +{ + int ret; + + BUG_ON(!func); + + ret = mmc_io_rw_direct(func->card, 1, func->num, addr, b, NULL); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writeb); + +/** + * sdio_writeb_readb - write and read a byte from SDIO function + * @func: SDIO function to access + * @write_byte: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Performs a RAW (Read after Write) operation as defined by SDIO spec - + * single byte is written to address space of a given SDIO function and + * response is read back from the same address, both using single request. + * If there is a problem with the operation, 0xff is returned and + * @err_ret will contain the error code. + */ +u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte, + unsigned int addr, int *err_ret) +{ + int ret; + u8 val; + + ret = mmc_io_rw_direct(func->card, 1, func->num, addr, + write_byte, &val); + if (err_ret) + *err_ret = ret; + if (ret) + val = 0xff; + + return val; +} +EXPORT_SYMBOL_GPL(sdio_writeb_readb); + +/** + * sdio_memcpy_fromio - read a chunk of memory from a SDIO function + * @func: SDIO function to access + * @dst: buffer to store the data + * @addr: address to begin reading from + * @count: number of bytes to read + * + * Reads from the address space of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_memcpy_fromio(struct sdio_func *func, void *dst, + unsigned int addr, int count) +{ + return sdio_io_rw_ext_helper(func, 0, addr, 1, dst, count); +} +EXPORT_SYMBOL_GPL(sdio_memcpy_fromio); + +/** + * sdio_memcpy_toio - write a chunk of memory to a SDIO function + * @func: SDIO function to access + * @addr: address to start writing to + * @src: buffer that contains the data to write + * @count: number of bytes to write + * + * Writes to the address space of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr, + void *src, int count) +{ + return sdio_io_rw_ext_helper(func, 1, addr, 1, src, count); +} +EXPORT_SYMBOL_GPL(sdio_memcpy_toio); + +/** + * sdio_readsb - read from a FIFO on a SDIO function + * @func: SDIO function to access + * @dst: buffer to store the data + * @addr: address of (single byte) FIFO + * @count: number of bytes to read + * + * Reads from the specified FIFO of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr, + int count) +{ + return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count); +} +EXPORT_SYMBOL_GPL(sdio_readsb); + +/** + * sdio_writesb - write to a FIFO of a SDIO function + * @func: SDIO function to access + * @addr: address of (single byte) FIFO + * @src: buffer that contains the data to write + * @count: number of bytes to write + * + * Writes to the specified FIFO of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src, + int count) +{ + return sdio_io_rw_ext_helper(func, 1, addr, 0, src, count); +} +EXPORT_SYMBOL_GPL(sdio_writesb); + +/** + * sdio_readw - read a 16 bit integer from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a 16 bit integer from the address space of a given SDIO + * function. If there is a problem reading the address, 0xffff + * is returned and @err_ret will contain the error code. + */ +u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret) +{ + int ret; + + if (err_ret) + *err_ret = 0; + + ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 2); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFFFF; + } + + return le16_to_cpup((__le16 *)func->tmpbuf); +} +EXPORT_SYMBOL_GPL(sdio_readw); + +/** + * sdio_writew - write a 16 bit integer to a SDIO function + * @func: SDIO function to access + * @b: integer to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a 16 bit integer to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret) +{ + int ret; + + *(__le16 *)func->tmpbuf = cpu_to_le16(b); + + ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writew); + +/** + * sdio_readl - read a 32 bit integer from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a 32 bit integer from the address space of a given SDIO + * function. If there is a problem reading the address, + * 0xffffffff is returned and @err_ret will contain the error + * code. + */ +u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret) +{ + int ret; + + if (err_ret) + *err_ret = 0; + + ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 4); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFFFFFFFF; + } + + return le32_to_cpup((__le32 *)func->tmpbuf); +} +EXPORT_SYMBOL_GPL(sdio_readl); + +/** + * sdio_writel - write a 32 bit integer to a SDIO function + * @func: SDIO function to access + * @b: integer to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a 32 bit integer to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret) +{ + int ret; + + *(__le32 *)func->tmpbuf = cpu_to_le32(b); + + ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writel); + +/** + * sdio_f0_readb - read a single byte from SDIO function 0 + * @func: an SDIO function of the card + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a single byte from the address space of SDIO function 0. + * If there is a problem reading the address, 0xff is returned + * and @err_ret will contain the error code. + */ +unsigned char sdio_f0_readb(struct sdio_func *func, unsigned int addr, + int *err_ret) +{ + int ret; + unsigned char val; + + BUG_ON(!func); + + if (err_ret) + *err_ret = 0; + + ret = mmc_io_rw_direct(func->card, 0, 0, addr, 0, &val); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFF; + } + + return val; +} +EXPORT_SYMBOL_GPL(sdio_f0_readb); + +/** + * sdio_f0_writeb - write a single byte to SDIO function 0 + * @func: an SDIO function of the card + * @b: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a single byte to the address space of SDIO function 0. + * @err_ret will contain the status of the actual transfer. + * + * Only writes to the vendor specific CCCR registers (0xF0 - + * 0xFF) are permiited; @err_ret will be set to -EINVAL for * + * writes outside this range. + */ +void sdio_f0_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, + int *err_ret) +{ + int ret; + + BUG_ON(!func); + + if ((addr < 0xF0 || addr > 0xFF) && (!mmc_card_lenient_fn0(func->card))) { + if (err_ret) + *err_ret = -EINVAL; + return; + } + + ret = mmc_io_rw_direct(func->card, 1, 0, addr, b, NULL); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_f0_writeb); + +/** + * sdio_get_host_pm_caps - get host power management capabilities + * @func: SDIO function attached to host + * + * Returns a capability bitmask corresponding to power management + * features supported by the host controller that the card function + * might rely upon during a system suspend. The host doesn't need + * to be claimed, nor the function active, for this information to be + * obtained. + */ +mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func) +{ + BUG_ON(!func); + BUG_ON(!func->card); + + return func->card->host->pm_caps; +} +EXPORT_SYMBOL_GPL(sdio_get_host_pm_caps); + +/** + * sdio_set_host_pm_flags - set wanted host power management capabilities + * @func: SDIO function attached to host + * + * Set a capability bitmask corresponding to wanted host controller + * power management features for the upcoming suspend state. + * This must be called, if needed, each time the suspend method of + * the function driver is called, and must contain only bits that + * were returned by sdio_get_host_pm_caps(). + * The host doesn't need to be claimed, nor the function active, + * for this information to be set. + */ +int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags) +{ + struct mmc_host *host; + + BUG_ON(!func); + BUG_ON(!func->card); + + host = func->card->host; + + if (flags & ~host->pm_caps) + return -EINVAL; + + /* function suspend methods are serialized, hence no lock needed */ + host->pm_flags |= flags; + return 0; +} +EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags); |