diff options
Diffstat (limited to 'drivers/mmc/host/android-goldfish.c')
-rw-r--r-- | drivers/mmc/host/android-goldfish.c | 568 |
1 files changed, 568 insertions, 0 deletions
diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c new file mode 100644 index 000000000..8b4e20a3f --- /dev/null +++ b/drivers/mmc/host/android-goldfish.c @@ -0,0 +1,568 @@ +/* + * Copyright 2007, Google Inc. + * Copyright 2012, Intel Inc. + * + * based on omap.c driver, which was + * Copyright (C) 2004 Nokia Corporation + * Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com> + * Misc hacks here and there by Tony Lindgren <tony@atomide.com> + * Other hacks (DMA, SD, etc) by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/major.h> + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/hdreg.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/mutex.h> +#include <linux/scatterlist.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <linux/clk.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/scatterlist.h> + +#include <asm/types.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +#define DRIVER_NAME "goldfish_mmc" + +#define BUFFER_SIZE 16384 + +#define GOLDFISH_MMC_READ(host, addr) (readl(host->reg_base + addr)) +#define GOLDFISH_MMC_WRITE(host, addr, x) (writel(x, host->reg_base + addr)) + +enum { + /* status register */ + MMC_INT_STATUS = 0x00, + /* set this to enable IRQ */ + MMC_INT_ENABLE = 0x04, + /* set this to specify buffer address */ + MMC_SET_BUFFER = 0x08, + + /* MMC command number */ + MMC_CMD = 0x0C, + + /* MMC argument */ + MMC_ARG = 0x10, + + /* MMC response (or R2 bits 0 - 31) */ + MMC_RESP_0 = 0x14, + + /* MMC R2 response bits 32 - 63 */ + MMC_RESP_1 = 0x18, + + /* MMC R2 response bits 64 - 95 */ + MMC_RESP_2 = 0x1C, + + /* MMC R2 response bits 96 - 127 */ + MMC_RESP_3 = 0x20, + + MMC_BLOCK_LENGTH = 0x24, + MMC_BLOCK_COUNT = 0x28, + + /* MMC state flags */ + MMC_STATE = 0x2C, + + /* MMC_INT_STATUS bits */ + + MMC_STAT_END_OF_CMD = 1U << 0, + MMC_STAT_END_OF_DATA = 1U << 1, + MMC_STAT_STATE_CHANGE = 1U << 2, + MMC_STAT_CMD_TIMEOUT = 1U << 3, + + /* MMC_STATE bits */ + MMC_STATE_INSERTED = 1U << 0, + MMC_STATE_READ_ONLY = 1U << 1, +}; + +/* + * Command types + */ +#define OMAP_MMC_CMDTYPE_BC 0 +#define OMAP_MMC_CMDTYPE_BCR 1 +#define OMAP_MMC_CMDTYPE_AC 2 +#define OMAP_MMC_CMDTYPE_ADTC 3 + + +struct goldfish_mmc_host { + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct mmc_host *mmc; + struct device *dev; + unsigned char id; /* 16xx chips have 2 MMC blocks */ + void __iomem *virt_base; + unsigned int phys_base; + int irq; + unsigned char bus_mode; + unsigned char hw_bus_mode; + + unsigned int sg_len; + unsigned dma_done:1; + unsigned dma_in_use:1; + + void __iomem *reg_base; +}; + +static inline int +goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host) +{ + return 0; +} + +static ssize_t +goldfish_mmc_show_cover_switch(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct goldfish_mmc_host *host = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" : + "closed"); +} + +static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL); + +static void +goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd) +{ + u32 cmdreg; + u32 resptype; + u32 cmdtype; + + host->cmd = cmd; + + resptype = 0; + cmdtype = 0; + + /* Our hardware needs to know exact type */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + break; + case MMC_RSP_R1: + case MMC_RSP_R1B: + /* resp 1, 1b, 6, 7 */ + resptype = 1; + break; + case MMC_RSP_R2: + resptype = 2; + break; + case MMC_RSP_R3: + resptype = 3; + break; + default: + dev_err(mmc_dev(host->mmc), + "Invalid response type: %04x\n", mmc_resp_type(cmd)); + break; + } + + if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) + cmdtype = OMAP_MMC_CMDTYPE_ADTC; + else if (mmc_cmd_type(cmd) == MMC_CMD_BC) + cmdtype = OMAP_MMC_CMDTYPE_BC; + else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) + cmdtype = OMAP_MMC_CMDTYPE_BCR; + else + cmdtype = OMAP_MMC_CMDTYPE_AC; + + cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12); + + if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) + cmdreg |= 1 << 6; + + if (cmd->flags & MMC_RSP_BUSY) + cmdreg |= 1 << 11; + + if (host->data && !(host->data->flags & MMC_DATA_WRITE)) + cmdreg |= 1 << 15; + + GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg); + GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg); +} + +static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host, + struct mmc_data *data) +{ + if (host->dma_in_use) { + enum dma_data_direction dma_data_dir; + + if (data->flags & MMC_DATA_WRITE) + dma_data_dir = DMA_TO_DEVICE; + else + dma_data_dir = DMA_FROM_DEVICE; + + if (dma_data_dir == DMA_FROM_DEVICE) { + /* + * We don't really have DMA, so we need + * to copy from our platform driver buffer + */ + uint8_t *dest = (uint8_t *)sg_virt(data->sg); + memcpy(dest, host->virt_base, data->sg->length); + } + host->data->bytes_xfered += data->sg->length; + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len, + dma_data_dir); + } + + host->data = NULL; + host->sg_len = 0; + + /* + * NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing + * dozens of requests until the card finishes writing data. + * It'd be cheaper to just wait till an EOFB interrupt arrives... + */ + + if (!data->stop) { + host->mrq = NULL; + mmc_request_done(host->mmc, data->mrq); + return; + } + + goldfish_mmc_start_command(host, data->stop); +} + +static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host, + struct mmc_data *data) +{ + if (!host->dma_in_use) { + goldfish_mmc_xfer_done(host, data); + return; + } + if (host->dma_done) + goldfish_mmc_xfer_done(host, data); +} + +static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host, + struct mmc_command *cmd) +{ + host->cmd = NULL; + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* response type 2 */ + cmd->resp[3] = + GOLDFISH_MMC_READ(host, MMC_RESP_0); + cmd->resp[2] = + GOLDFISH_MMC_READ(host, MMC_RESP_1); + cmd->resp[1] = + GOLDFISH_MMC_READ(host, MMC_RESP_2); + cmd->resp[0] = + GOLDFISH_MMC_READ(host, MMC_RESP_3); + } else { + /* response types 1, 1b, 3, 4, 5, 6 */ + cmd->resp[0] = + GOLDFISH_MMC_READ(host, MMC_RESP_0); + } + } + + if (host->data == NULL || cmd->error) { + host->mrq = NULL; + mmc_request_done(host->mmc, cmd->mrq); + } +} + +static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id) +{ + struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id; + u16 status; + int end_command = 0; + int end_transfer = 0; + int transfer_error = 0; + int state_changed = 0; + int cmd_timeout = 0; + + while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) { + GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); + + if (status & MMC_STAT_END_OF_CMD) + end_command = 1; + + if (status & MMC_STAT_END_OF_DATA) + end_transfer = 1; + + if (status & MMC_STAT_STATE_CHANGE) + state_changed = 1; + + if (status & MMC_STAT_CMD_TIMEOUT) { + end_command = 0; + cmd_timeout = 1; + } + } + + if (cmd_timeout) { + struct mmc_request *mrq = host->mrq; + mrq->cmd->error = -ETIMEDOUT; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); + } + + if (end_command) + goldfish_mmc_cmd_done(host, host->cmd); + + if (transfer_error) + goldfish_mmc_xfer_done(host, host->data); + else if (end_transfer) { + host->dma_done = 1; + goldfish_mmc_end_of_data(host, host->data); + } else if (host->data != NULL) { + /* + * WORKAROUND -- after porting this driver from 2.6 to 3.4, + * during device initialization, cases where host->data is + * non-null but end_transfer is false would occur. Doing + * nothing in such cases results in no further interrupts, + * and initialization failure. + * TODO -- find the real cause. + */ + host->dma_done = 1; + goldfish_mmc_end_of_data(host, host->data); + } + + if (state_changed) { + u32 state = GOLDFISH_MMC_READ(host, MMC_STATE); + pr_info("%s: Card detect now %d\n", __func__, + (state & MMC_STATE_INSERTED)); + mmc_detect_change(host->mmc, 0); + } + + if (!end_command && !end_transfer && + !transfer_error && !state_changed && !cmd_timeout) { + status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS); + dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status); + if (status != 0) { + GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); + GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0); + } + } + + return IRQ_HANDLED; +} + +static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host, + struct mmc_request *req) +{ + struct mmc_data *data = req->data; + int block_size; + unsigned sg_len; + enum dma_data_direction dma_data_dir; + + host->data = data; + if (data == NULL) { + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0); + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0); + host->dma_in_use = 0; + return; + } + + block_size = data->blksz; + + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1); + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1); + + /* + * Cope with calling layer confusion; it issues "single + * block" writes using multi-block scatterlists. + */ + sg_len = (data->blocks == 1) ? 1 : data->sg_len; + + if (data->flags & MMC_DATA_WRITE) + dma_data_dir = DMA_TO_DEVICE; + else + dma_data_dir = DMA_FROM_DEVICE; + + host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + sg_len, dma_data_dir); + host->dma_done = 0; + host->dma_in_use = 1; + + if (dma_data_dir == DMA_TO_DEVICE) { + /* + * We don't really have DMA, so we need to copy to our + * platform driver buffer + */ + const uint8_t *src = (uint8_t *)sg_virt(data->sg); + memcpy(host->virt_base, src, data->sg->length); + } +} + +static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct goldfish_mmc_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + + host->mrq = req; + goldfish_mmc_prepare_data(host, req); + goldfish_mmc_start_command(host, req->cmd); + + /* + * This is to avoid accidentally being detected as an SDIO card + * in mmc_attach_sdio(). + */ + if (req->cmd->opcode == SD_IO_SEND_OP_COND && + req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR)) + req->cmd->error = -EINVAL; +} + +static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct goldfish_mmc_host *host = mmc_priv(mmc); + + host->bus_mode = ios->bus_mode; + host->hw_bus_mode = host->bus_mode; +} + +static int goldfish_mmc_get_ro(struct mmc_host *mmc) +{ + uint32_t state; + struct goldfish_mmc_host *host = mmc_priv(mmc); + + state = GOLDFISH_MMC_READ(host, MMC_STATE); + return ((state & MMC_STATE_READ_ONLY) != 0); +} + +static const struct mmc_host_ops goldfish_mmc_ops = { + .request = goldfish_mmc_request, + .set_ios = goldfish_mmc_set_ios, + .get_ro = goldfish_mmc_get_ro, +}; + +static int goldfish_mmc_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct goldfish_mmc_host *host = NULL; + struct resource *res; + int ret = 0; + int irq; + dma_addr_t buf_addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (res == NULL || irq < 0) + return -ENXIO; + + mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev); + if (mmc == NULL) { + ret = -ENOMEM; + goto err_alloc_host_failed; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + + pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end); + host->reg_base = ioremap(res->start, resource_size(res)); + if (host->reg_base == NULL) { + ret = -ENOMEM; + goto ioremap_failed; + } + host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, + &buf_addr, GFP_KERNEL); + + if (host->virt_base == 0) { + ret = -ENOMEM; + goto dma_alloc_failed; + } + host->phys_base = buf_addr; + + host->id = pdev->id; + host->irq = irq; + + mmc->ops = &goldfish_mmc_ops; + mmc->f_min = 400000; + mmc->f_max = 24000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA; + + /* Use scatterlist DMA to reduce per-transfer costs. + * NOTE max_seg_size assumption that small blocks aren't + * normally used (except e.g. for reading SD registers). + */ + mmc->max_segs = 32; + mmc->max_blk_size = 2048; /* MMC_BLOCK_LENGTH is 11 bits (+1) */ + mmc->max_blk_count = 2048; /* MMC_BLOCK_COUNT is 11 bits (+1) */ + mmc->max_req_size = BUFFER_SIZE; + mmc->max_seg_size = mmc->max_req_size; + + ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n"); + goto err_request_irq_failed; + } + + host->dev = &pdev->dev; + platform_set_drvdata(pdev, host); + + ret = device_create_file(&pdev->dev, &dev_attr_cover_switch); + if (ret) + dev_warn(mmc_dev(host->mmc), + "Unable to create sysfs attributes\n"); + + GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base); + GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, + MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA | + MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT); + + mmc_add_host(mmc); + return 0; + +err_request_irq_failed: + dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, + host->phys_base); +dma_alloc_failed: + iounmap(host->reg_base); +ioremap_failed: + mmc_free_host(host->mmc); +err_alloc_host_failed: + return ret; +} + +static int goldfish_mmc_remove(struct platform_device *pdev) +{ + struct goldfish_mmc_host *host = platform_get_drvdata(pdev); + + BUG_ON(host == NULL); + + mmc_remove_host(host->mmc); + free_irq(host->irq, host); + dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base); + iounmap(host->reg_base); + mmc_free_host(host->mmc); + return 0; +} + +static struct platform_driver goldfish_mmc_driver = { + .probe = goldfish_mmc_probe, + .remove = goldfish_mmc_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +module_platform_driver(goldfish_mmc_driver); +MODULE_LICENSE("GPL v2"); |