summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-msm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-msm.c')
-rw-r--r--drivers/mmc/host/sdhci-msm.c117
1 files changed, 115 insertions, 2 deletions
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 0653fe730..8ef44a2a2 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -32,6 +32,21 @@
#define CORE_POWER 0x0
#define CORE_SW_RST BIT(7)
+#define CORE_PWRCTL_STATUS 0xdc
+#define CORE_PWRCTL_MASK 0xe0
+#define CORE_PWRCTL_CLEAR 0xe4
+#define CORE_PWRCTL_CTL 0xe8
+#define CORE_PWRCTL_BUS_OFF BIT(0)
+#define CORE_PWRCTL_BUS_ON BIT(1)
+#define CORE_PWRCTL_IO_LOW BIT(2)
+#define CORE_PWRCTL_IO_HIGH BIT(3)
+#define CORE_PWRCTL_BUS_SUCCESS BIT(0)
+#define CORE_PWRCTL_IO_SUCCESS BIT(2)
+#define REQ_BUS_OFF BIT(0)
+#define REQ_BUS_ON BIT(1)
+#define REQ_IO_LOW BIT(2)
+#define REQ_IO_HIGH BIT(3)
+#define INT_MASK 0xf
#define MAX_PHASES 16
#define CORE_DLL_LOCK BIT(7)
#define CORE_DLL_EN BIT(16)
@@ -56,6 +71,7 @@
struct sdhci_msm_host {
struct platform_device *pdev;
void __iomem *core_mem; /* MSM SDCC mapped address */
+ int pwr_irq; /* power irq */
struct clk *clk; /* main SD/MMC bus clock */
struct clk *pclk; /* SDHC peripheral bus clock */
struct clk *bus_clk; /* SDHC bus voter clock */
@@ -410,6 +426,85 @@ retry:
return rc;
}
+static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int uhs)
+{
+ struct mmc_host *mmc = host->mmc;
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ switch (uhs) {
+ case MMC_TIMING_UHS_SDR12:
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ break;
+ case MMC_TIMING_UHS_SDR25:
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ break;
+ case MMC_TIMING_MMC_HS200:
+ case MMC_TIMING_UHS_SDR104:
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ break;
+ }
+
+ /*
+ * When clock frequency is less than 100MHz, the feedback clock must be
+ * provided and DLL must not be used so that tuning can be skipped. To
+ * provide feedback clock, the mode selection can be any value less
+ * than 3'b011 in bits [2:0] of HOST CONTROL2 register.
+ */
+ if (host->clock <= 100000000 &&
+ (uhs == MMC_TIMING_MMC_HS400 ||
+ uhs == MMC_TIMING_MMC_HS200 ||
+ uhs == MMC_TIMING_UHS_SDR104))
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+
+ dev_dbg(mmc_dev(mmc), "%s: clock=%u uhs=%u ctrl_2=0x%x\n",
+ mmc_hostname(host->mmc), host->clock, uhs, ctrl_2);
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static void sdhci_msm_voltage_switch(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ u32 irq_status, irq_ack = 0;
+
+ irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
+ irq_status &= INT_MASK;
+
+ writel_relaxed(irq_status, msm_host->core_mem + CORE_PWRCTL_CLEAR);
+
+ if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF))
+ irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
+ if (irq_status & (CORE_PWRCTL_IO_LOW | CORE_PWRCTL_IO_HIGH))
+ irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+
+ /*
+ * The driver has to acknowledge the interrupt, switch voltages and
+ * report back if it succeded or not to this register. The voltage
+ * switches are handled by the sdhci core, so just report success.
+ */
+ writel_relaxed(irq_ack, msm_host->core_mem + CORE_PWRCTL_CTL);
+}
+
+static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
+{
+ struct sdhci_host *host = (struct sdhci_host *)data;
+
+ sdhci_msm_voltage_switch(host);
+
+ return IRQ_HANDLED;
+}
+
static const struct of_device_id sdhci_msm_dt_match[] = {
{ .compatible = "qcom,sdhci-msm-v4" },
{},
@@ -422,11 +517,13 @@ static const struct sdhci_ops sdhci_msm_ops = {
.reset = sdhci_reset,
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = sdhci_msm_set_uhs_signaling,
+ .voltage_switch = sdhci_msm_voltage_switch,
};
static const struct sdhci_pltfm_data sdhci_msm_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_NO_CARD_NO_RESET |
SDHCI_QUIRK_SINGLE_POWER_WRITE,
.ops = &sdhci_msm_ops,
};
@@ -473,7 +570,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
if (IS_ERR(msm_host->pclk)) {
ret = PTR_ERR(msm_host->pclk);
- dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
+ dev_err(&pdev->dev, "Peripheral clk setup failed (%d)\n", ret);
goto bus_clk_disable;
}
@@ -545,6 +642,22 @@ static int sdhci_msm_probe(struct platform_device *pdev)
CORE_VENDOR_SPEC_CAPABILITIES0);
}
+ /* Setup IRQ for handling power/voltage tasks with PMIC */
+ msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq");
+ if (msm_host->pwr_irq < 0) {
+ dev_err(&pdev->dev, "Get pwr_irq failed (%d)\n",
+ msm_host->pwr_irq);
+ goto clk_disable;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL,
+ sdhci_msm_pwr_irq, IRQF_ONESHOT,
+ dev_name(&pdev->dev), host);
+ if (ret) {
+ dev_err(&pdev->dev, "Request IRQ failed (%d)\n", ret);
+ goto clk_disable;
+ }
+
ret = sdhci_add_host(host);
if (ret)
goto clk_disable;