summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-of-esdhc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-of-esdhc.c')
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c412
1 files changed, 412 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
new file mode 100644
index 000000000..22e9111b1
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -0,0 +1,412 @@
+/*
+ * Freescale eSDHC controller driver.
+ *
+ * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define VENDOR_V_22 0x12
+#define VENDOR_V_23 0x13
+static u32 esdhc_readl(struct sdhci_host *host, int reg)
+{
+ u32 ret;
+
+ ret = in_be32(host->ioaddr + reg);
+ /*
+ * The bit of ADMA flag in eSDHC is not compatible with standard
+ * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
+ * supported by eSDHC.
+ * And for many FSL eSDHC controller, the reset value of field
+ * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
+ * only these vendor version is greater than 2.2/0x12 support ADMA.
+ * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
+ * the verdor version number, oxFE is SDHCI_HOST_VERSION.
+ */
+ if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
+ u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+ if (tmp > VENDOR_V_22)
+ ret |= SDHCI_CAN_DO_ADMA2;
+ }
+
+ return ret;
+}
+
+static u16 esdhc_readw(struct sdhci_host *host, int reg)
+{
+ u16 ret;
+ int base = reg & ~0x3;
+ int shift = (reg & 0x2) * 8;
+
+ if (unlikely(reg == SDHCI_HOST_VERSION))
+ ret = in_be32(host->ioaddr + base) & 0xffff;
+ else
+ ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
+ return ret;
+}
+
+static u8 esdhc_readb(struct sdhci_host *host, int reg)
+{
+ int base = reg & ~0x3;
+ int shift = (reg & 0x3) * 8;
+ u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+ /*
+ * "DMA select" locates at offset 0x28 in SD specification, but on
+ * P5020 or P3041, it locates at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ dma_bits = in_be32(host->ioaddr + reg);
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+ /* fixup the result */
+ ret &= ~SDHCI_CTRL_DMA_MASK;
+ ret |= dma_bits;
+ }
+
+ return ret;
+}
+
+static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ /*
+ * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+ * when SYSCTL[RSTD]) is set for some special operations.
+ * No any impact other operation.
+ */
+ if (reg == SDHCI_INT_ENABLE)
+ val |= SDHCI_INT_BLK_GAP;
+ sdhci_be32bs_writel(host, val, reg);
+}
+
+static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ if (reg == SDHCI_BLOCK_SIZE) {
+ /*
+ * Two last DMA bits are reserved, and first one is used for
+ * non-standard blksz of 4096 bytes that we don't support
+ * yet. So clear the DMA boundary bits.
+ */
+ val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+ }
+ sdhci_be32bs_writew(host, val, reg);
+}
+
+static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ /*
+ * "DMA select" location is offset 0x28 in SD specification, but on
+ * P5020 or P3041, it's located at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ /*
+ * If host control register is not standard, exit
+ * this function
+ */
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
+ return;
+
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+ clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+ dma_bits);
+ val &= ~SDHCI_CTRL_DMA_MASK;
+ val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+ }
+
+ /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
+ if (reg == SDHCI_HOST_CONTROL)
+ val &= ~ESDHC_HOST_CONTROL_RES;
+ sdhci_be32bs_writeb(host, val, reg);
+}
+
+/*
+ * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
+ * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
+ * and Block Gap Event(IRQSTAT[BGE]) are also set.
+ * For Continue, apply soft reset for data(SYSCTL[RSTD]);
+ * and re-issue the entire read transaction from beginning.
+ */
+static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+{
+ u32 tmp;
+ bool applicable;
+ dma_addr_t dmastart;
+ dma_addr_t dmanow;
+
+ tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+
+ applicable = (intmask & SDHCI_INT_DATA_END) &&
+ (intmask & SDHCI_INT_BLK_GAP) &&
+ (tmp == VENDOR_V_23);
+ if (!applicable)
+ return;
+
+ host->data->error = 0;
+ dmastart = sg_dma_address(host->data->sg);
+ dmanow = dmastart + host->data->bytes_xfered;
+ /*
+ * Force update to the next DMA block boundary.
+ */
+ dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+ SDHCI_DEFAULT_BOUNDARY_SIZE;
+ host->data->bytes_xfered = dmanow - dmastart;
+ sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+}
+
+static int esdhc_of_enable_dma(struct sdhci_host *host)
+{
+ setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
+ return 0;
+}
+
+static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return pltfm_host->clock;
+}
+
+static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return pltfm_host->clock / 256 / 16;
+}
+
+static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ int pre_div = 2;
+ int div = 1;
+ u32 temp;
+
+ host->mmc->actual_clock = 0;
+
+ if (clock == 0)
+ return;
+
+ /* Workaround to reduce the clock frequency for p1010 esdhc */
+ if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
+ if (clock > 20000000)
+ clock -= 5000000;
+ if (clock > 40000000)
+ clock -= 5000000;
+ }
+
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+ temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+ | ESDHC_CLOCK_MASK);
+ sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+ while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+ pre_div *= 2;
+
+ while (host->max_clk / pre_div / div > clock && div < 16)
+ div++;
+
+ dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+ clock, host->max_clk / pre_div / div);
+
+ pre_div >>= 1;
+ div--;
+
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+ temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+ | (div << ESDHC_DIVIDER_SHIFT)
+ | (pre_div << ESDHC_PREDIV_SHIFT));
+ sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+ mdelay(1);
+}
+
+static void esdhc_of_platform_init(struct sdhci_host *host)
+{
+ u32 vvn;
+
+ vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+ if (vvn == VENDOR_V_22)
+ host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+ if (vvn > VENDOR_V_22)
+ host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
+}
+
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+ u32 ctrl;
+
+ switch (width) {
+ case MMC_BUS_WIDTH_8:
+ ctrl = ESDHC_CTRL_8BITBUS;
+ break;
+
+ case MMC_BUS_WIDTH_4:
+ ctrl = ESDHC_CTRL_4BITBUS;
+ break;
+
+ default:
+ ctrl = 0;
+ break;
+ }
+
+ clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
+ ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
+}
+
+static void esdhc_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_reset(host, mask);
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static const struct sdhci_ops sdhci_esdhc_ops = {
+ .read_l = esdhc_readl,
+ .read_w = esdhc_readw,
+ .read_b = esdhc_readb,
+ .write_l = esdhc_writel,
+ .write_w = esdhc_writew,
+ .write_b = esdhc_writeb,
+ .set_clock = esdhc_of_set_clock,
+ .enable_dma = esdhc_of_enable_dma,
+ .get_max_clock = esdhc_of_get_max_clock,
+ .get_min_clock = esdhc_of_get_min_clock,
+ .platform_init = esdhc_of_platform_init,
+ .adma_workaround = esdhci_of_adma_workaround,
+ .set_bus_width = esdhc_pltfm_set_bus_width,
+ .reset = esdhc_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_PM
+
+static u32 esdhc_proctl;
+static int esdhc_of_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+
+ esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
+
+ return sdhci_suspend_host(host);
+}
+
+static int esdhc_of_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ int ret = sdhci_resume_host(host);
+
+ if (ret == 0) {
+ /* Isn't this already done by sdhci_resume_host() ? --rmk */
+ esdhc_of_enable_dma(host);
+ sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
+ }
+
+ return ret;
+}
+
+static const struct dev_pm_ops esdhc_pmops = {
+ .suspend = esdhc_of_suspend,
+ .resume = esdhc_of_resume,
+};
+#define ESDHC_PMOPS (&esdhc_pmops)
+#else
+#define ESDHC_PMOPS NULL
+#endif
+
+static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
+ /*
+ * card detection could be handled via GPIO
+ * eSDHC cannot support End Attribute in NOP ADMA descriptor
+ */
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
+ | SDHCI_QUIRK_NO_CARD_NO_RESET
+ | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .ops = &sdhci_esdhc_ops,
+};
+
+static int sdhci_esdhc_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct device_node *np;
+ int ret;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0);
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ sdhci_get_of_property(pdev);
+
+ np = pdev->dev.of_node;
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
+ /*
+ * Freescale messed up with P2020 as it has a non-standard
+ * host control register
+ */
+ host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
+ }
+
+ /* call to generic mmc_of_parse to support additional capabilities */
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err;
+
+ mmc_of_parse_voltage(np, &host->ocr_mask);
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err;
+
+ return 0;
+ err:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+ { .compatible = "fsl,mpc8379-esdhc" },
+ { .compatible = "fsl,mpc8536-esdhc" },
+ { .compatible = "fsl,esdhc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
+static struct platform_driver sdhci_esdhc_driver = {
+ .driver = {
+ .name = "sdhci-esdhc",
+ .of_match_table = sdhci_esdhc_of_match,
+ .pm = ESDHC_PMOPS,
+ },
+ .probe = sdhci_esdhc_probe,
+ .remove = sdhci_pltfm_unregister,
+};
+
+module_platform_driver(sdhci_esdhc_driver);
+
+MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
+MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
+ "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");