diff options
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 3569 |
1 files changed, 3569 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c new file mode 100644 index 000000000..d3dbb2805 --- /dev/null +++ b/drivers/mmc/host/sdhci.c @@ -0,0 +1,3569 @@ +/* + * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver + * + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * Thanks to the following companies for their support: + * + * - JMicron (hardware and technical support) + */ + +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/scatterlist.h> +#include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> + +#include <linux/leds.h> + +#include <linux/mmc/mmc.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/slot-gpio.h> + +#include "sdhci.h" + +#define DRIVER_NAME "sdhci" + +#define DBG(f, x...) \ + pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x) + +#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \ + defined(CONFIG_MMC_SDHCI_MODULE)) +#define SDHCI_USE_LEDS_CLASS +#endif + +#define MAX_TUNING_LOOP 40 + +static unsigned int debug_quirks = 0; +static unsigned int debug_quirks2; + +static void sdhci_finish_data(struct sdhci_host *); + +static void sdhci_finish_command(struct sdhci_host *); +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); +static void sdhci_tuning_timer(unsigned long data); +static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); +static int sdhci_pre_dma_transfer(struct sdhci_host *host, + struct mmc_data *data, + struct sdhci_host_next *next); +static int sdhci_do_get_cd(struct sdhci_host *host); + +#ifdef CONFIG_PM +static int sdhci_runtime_pm_get(struct sdhci_host *host); +static int sdhci_runtime_pm_put(struct sdhci_host *host); +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host); +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host); +#else +static inline int sdhci_runtime_pm_get(struct sdhci_host *host) +{ + return 0; +} +static inline int sdhci_runtime_pm_put(struct sdhci_host *host) +{ + return 0; +} +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) +{ +} +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +{ +} +#endif + +static void sdhci_dumpregs(struct sdhci_host *host) +{ + pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", + mmc_hostname(host->mmc)); + + pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", + sdhci_readl(host, SDHCI_DMA_ADDRESS), + sdhci_readw(host, SDHCI_HOST_VERSION)); + pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", + sdhci_readw(host, SDHCI_BLOCK_SIZE), + sdhci_readw(host, SDHCI_BLOCK_COUNT)); + pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", + sdhci_readl(host, SDHCI_ARGUMENT), + sdhci_readw(host, SDHCI_TRANSFER_MODE)); + pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", + sdhci_readl(host, SDHCI_PRESENT_STATE), + sdhci_readb(host, SDHCI_HOST_CONTROL)); + pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", + sdhci_readb(host, SDHCI_POWER_CONTROL), + sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL)); + pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", + sdhci_readb(host, SDHCI_WAKE_UP_CONTROL), + sdhci_readw(host, SDHCI_CLOCK_CONTROL)); + pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", + sdhci_readb(host, SDHCI_TIMEOUT_CONTROL), + sdhci_readl(host, SDHCI_INT_STATUS)); + pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", + sdhci_readl(host, SDHCI_INT_ENABLE), + sdhci_readl(host, SDHCI_SIGNAL_ENABLE)); + pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", + sdhci_readw(host, SDHCI_ACMD12_ERR), + sdhci_readw(host, SDHCI_SLOT_INT_STATUS)); + pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", + sdhci_readl(host, SDHCI_CAPABILITIES), + sdhci_readl(host, SDHCI_CAPABILITIES_1)); + pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", + sdhci_readw(host, SDHCI_COMMAND), + sdhci_readl(host, SDHCI_MAX_CURRENT)); + pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n", + sdhci_readw(host, SDHCI_HOST_CONTROL2)); + + if (host->flags & SDHCI_USE_ADMA) { + if (host->flags & SDHCI_USE_64_BIT_DMA) + pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n", + readl(host->ioaddr + SDHCI_ADMA_ERROR), + readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI), + readl(host->ioaddr + SDHCI_ADMA_ADDRESS)); + else + pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n", + readl(host->ioaddr + SDHCI_ADMA_ERROR), + readl(host->ioaddr + SDHCI_ADMA_ADDRESS)); + } + + pr_debug(DRIVER_NAME ": ===========================================\n"); +} + +/*****************************************************************************\ + * * + * Low level functions * + * * +\*****************************************************************************/ + +static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) +{ + u32 present; + + if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) + return; + + if (enable) { + present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; + + host->ier |= present ? SDHCI_INT_CARD_REMOVE : + SDHCI_INT_CARD_INSERT; + } else { + host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); + } + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +} + +static void sdhci_enable_card_detection(struct sdhci_host *host) +{ + sdhci_set_card_detection(host, true); +} + +static void sdhci_disable_card_detection(struct sdhci_host *host) +{ + sdhci_set_card_detection(host, false); +} + +void sdhci_reset(struct sdhci_host *host, u8 mask) +{ + unsigned long timeout; + + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); + + if (mask & SDHCI_RESET_ALL) { + host->clock = 0; + /* Reset-all turns off SD Bus Power */ + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + } + + /* Wait max 100 ms */ + timeout = 100; + + /* hw clears the bit when it's done */ + while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) { + if (timeout == 0) { + pr_err("%s: Reset 0x%x never completed.\n", + mmc_hostname(host->mmc), (int)mask); + sdhci_dumpregs(host); + return; + } + timeout--; + mdelay(1); + } +} +EXPORT_SYMBOL_GPL(sdhci_reset); + +static void sdhci_do_reset(struct sdhci_host *host, u8 mask) +{ + if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { + if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT)) + return; + } + + host->ops->reset(host, mask); + + if (mask & SDHCI_RESET_ALL) { + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } + + /* Resetting the controller clears many */ + host->preset_enabled = false; + } +} + +static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); + +static void sdhci_init(struct sdhci_host *host, int soft) +{ + if (soft) + sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); + else + sdhci_do_reset(host, SDHCI_RESET_ALL); + + host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | + SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | + SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC | + SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END | + SDHCI_INT_RESPONSE; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + + if (soft) { + /* force clock reconfiguration */ + host->clock = 0; + sdhci_set_ios(host->mmc, &host->mmc->ios); + } +} + +static void sdhci_reinit(struct sdhci_host *host) +{ + sdhci_init(host, 0); + /* + * Retuning stuffs are affected by different cards inserted and only + * applicable to UHS-I cards. So reset these fields to their initial + * value when card is removed. + */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + host->flags &= ~SDHCI_USING_RETUNING_TIMER; + + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + } + sdhci_enable_card_detection(host); +} + +static void sdhci_activate_led(struct sdhci_host *host) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + ctrl |= SDHCI_CTRL_LED; + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} + +static void sdhci_deactivate_led(struct sdhci_host *host) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_LED; + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} + +#ifdef SDHCI_USE_LEDS_CLASS +static void sdhci_led_control(struct led_classdev *led, + enum led_brightness brightness) +{ + struct sdhci_host *host = container_of(led, struct sdhci_host, led); + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (host->runtime_suspended) + goto out; + + if (brightness == LED_OFF) + sdhci_deactivate_led(host); + else + sdhci_activate_led(host); +out: + spin_unlock_irqrestore(&host->lock, flags); +} +#endif + +/*****************************************************************************\ + * * + * Core functions * + * * +\*****************************************************************************/ + +static void sdhci_read_block_pio(struct sdhci_host *host) +{ + unsigned long flags; + size_t blksize, len, chunk; + u32 uninitialized_var(scratch); + u8 *buf; + + DBG("PIO reading\n"); + + blksize = host->data->blksz; + chunk = 0; + + local_irq_save(flags); + + while (blksize) { + if (!sg_miter_next(&host->sg_miter)) + BUG(); + + len = min(host->sg_miter.length, blksize); + + blksize -= len; + host->sg_miter.consumed = len; + + buf = host->sg_miter.addr; + + while (len) { + if (chunk == 0) { + scratch = sdhci_readl(host, SDHCI_BUFFER); + chunk = 4; + } + + *buf = scratch & 0xFF; + + buf++; + scratch >>= 8; + chunk--; + len--; + } + } + + sg_miter_stop(&host->sg_miter); + + local_irq_restore(flags); +} + +static void sdhci_write_block_pio(struct sdhci_host *host) +{ + unsigned long flags; + size_t blksize, len, chunk; + u32 scratch; + u8 *buf; + + DBG("PIO writing\n"); + + blksize = host->data->blksz; + chunk = 0; + scratch = 0; + + local_irq_save(flags); + + while (blksize) { + if (!sg_miter_next(&host->sg_miter)) + BUG(); + + len = min(host->sg_miter.length, blksize); + + blksize -= len; + host->sg_miter.consumed = len; + + buf = host->sg_miter.addr; + + while (len) { + scratch |= (u32)*buf << (chunk * 8); + + buf++; + chunk++; + len--; + + if ((chunk == 4) || ((len == 0) && (blksize == 0))) { + sdhci_writel(host, scratch, SDHCI_BUFFER); + chunk = 0; + scratch = 0; + } + } + } + + sg_miter_stop(&host->sg_miter); + + local_irq_restore(flags); +} + +static void sdhci_transfer_pio(struct sdhci_host *host) +{ + u32 mask; + + BUG_ON(!host->data); + + if (host->blocks == 0) + return; + + if (host->data->flags & MMC_DATA_READ) + mask = SDHCI_DATA_AVAILABLE; + else + mask = SDHCI_SPACE_AVAILABLE; + + /* + * Some controllers (JMicron JMB38x) mess up the buffer bits + * for transfers < 4 bytes. As long as it is just one block, + * we can ignore the bits. + */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) && + (host->data->blocks == 1)) + mask = ~0; + + while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) { + if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY) + udelay(100); + + if (host->data->flags & MMC_DATA_READ) + sdhci_read_block_pio(host); + else + sdhci_write_block_pio(host); + + host->blocks--; + if (host->blocks == 0) + break; + } + + DBG("PIO transfer complete.\n"); +} + +static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags) +{ + local_irq_save(*flags); + return kmap_atomic(sg_page(sg)) + sg->offset; +} + +static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags) +{ + kunmap_atomic(buffer); + local_irq_restore(*flags); +} + +static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc, + dma_addr_t addr, int len, unsigned cmd) +{ + struct sdhci_adma2_64_desc *dma_desc = desc; + + /* 32-bit and 64-bit descriptors have these members in same position */ + dma_desc->cmd = cpu_to_le16(cmd); + dma_desc->len = cpu_to_le16(len); + dma_desc->addr_lo = cpu_to_le32((u32)addr); + + if (host->flags & SDHCI_USE_64_BIT_DMA) + dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32); +} + +static void sdhci_adma_mark_end(void *desc) +{ + struct sdhci_adma2_64_desc *dma_desc = desc; + + /* 32-bit and 64-bit descriptors have 'cmd' in same position */ + dma_desc->cmd |= cpu_to_le16(ADMA2_END); +} + +static int sdhci_adma_table_pre(struct sdhci_host *host, + struct mmc_data *data) +{ + int direction; + + void *desc; + void *align; + dma_addr_t addr; + dma_addr_t align_addr; + int len, offset; + + struct scatterlist *sg; + int i; + char *buffer; + unsigned long flags; + + /* + * The spec does not specify endianness of descriptor table. + * We currently guess that it is LE. + */ + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + host->align_addr = dma_map_single(mmc_dev(host->mmc), + host->align_buffer, host->align_buffer_sz, direction); + if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr)) + goto fail; + BUG_ON(host->align_addr & host->align_mask); + + host->sg_count = sdhci_pre_dma_transfer(host, data, NULL); + if (host->sg_count < 0) + goto unmap_align; + + desc = host->adma_table; + align = host->align_buffer; + + align_addr = host->align_addr; + + for_each_sg(data->sg, sg, host->sg_count, i) { + addr = sg_dma_address(sg); + len = sg_dma_len(sg); + + /* + * The SDHCI specification states that ADMA + * addresses must be 32-bit aligned. If they + * aren't, then we use a bounce buffer for + * the (up to three) bytes that screw up the + * alignment. + */ + offset = (host->align_sz - (addr & host->align_mask)) & + host->align_mask; + if (offset) { + if (data->flags & MMC_DATA_WRITE) { + buffer = sdhci_kmap_atomic(sg, &flags); + memcpy(align, buffer, offset); + sdhci_kunmap_atomic(buffer, &flags); + } + + /* tran, valid */ + sdhci_adma_write_desc(host, desc, align_addr, offset, + ADMA2_TRAN_VALID); + + BUG_ON(offset > 65536); + + align += host->align_sz; + align_addr += host->align_sz; + + desc += host->desc_sz; + + addr += offset; + len -= offset; + } + + BUG_ON(len > 65536); + + /* tran, valid */ + sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID); + desc += host->desc_sz; + + /* + * If this triggers then we have a calculation bug + * somewhere. :/ + */ + WARN_ON((desc - host->adma_table) >= host->adma_table_sz); + } + + if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) { + /* + * Mark the last descriptor as the terminating descriptor + */ + if (desc != host->adma_table) { + desc -= host->desc_sz; + sdhci_adma_mark_end(desc); + } + } else { + /* + * Add a terminating entry. + */ + + /* nop, end, valid */ + sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID); + } + + /* + * Resync align buffer as we might have changed it. + */ + if (data->flags & MMC_DATA_WRITE) { + dma_sync_single_for_device(mmc_dev(host->mmc), + host->align_addr, host->align_buffer_sz, direction); + } + + return 0; + +unmap_align: + dma_unmap_single(mmc_dev(host->mmc), host->align_addr, + host->align_buffer_sz, direction); +fail: + return -EINVAL; +} + +static void sdhci_adma_table_post(struct sdhci_host *host, + struct mmc_data *data) +{ + int direction; + + struct scatterlist *sg; + int i, size; + void *align; + char *buffer; + unsigned long flags; + bool has_unaligned; + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + dma_unmap_single(mmc_dev(host->mmc), host->align_addr, + host->align_buffer_sz, direction); + + /* Do a quick scan of the SG list for any unaligned mappings */ + has_unaligned = false; + for_each_sg(data->sg, sg, host->sg_count, i) + if (sg_dma_address(sg) & host->align_mask) { + has_unaligned = true; + break; + } + + if (has_unaligned && data->flags & MMC_DATA_READ) { + dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); + + align = host->align_buffer; + + for_each_sg(data->sg, sg, host->sg_count, i) { + if (sg_dma_address(sg) & host->align_mask) { + size = host->align_sz - + (sg_dma_address(sg) & host->align_mask); + + buffer = sdhci_kmap_atomic(sg, &flags); + memcpy(buffer, align, size); + sdhci_kunmap_atomic(buffer, &flags); + + align += host->align_sz; + } + } + } + + if (!data->host_cookie) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); +} + +static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) +{ + u8 count; + struct mmc_data *data = cmd->data; + unsigned target_timeout, current_timeout; + + /* + * If the host controller provides us with an incorrect timeout + * value, just skip the check and use 0xE. The hardware may take + * longer to time out, but that's much better than having a too-short + * timeout value. + */ + if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) + return 0xE; + + /* Unspecified timeout, assume max */ + if (!data && !cmd->busy_timeout) + return 0xE; + + /* timeout in us */ + if (!data) + target_timeout = cmd->busy_timeout * 1000; + else { + target_timeout = data->timeout_ns / 1000; + if (host->clock) + target_timeout += data->timeout_clks / host->clock; + } + + /* + * Figure out needed cycles. + * We do this in steps in order to fit inside a 32 bit int. + * The first step is the minimum timeout, which will have a + * minimum resolution of 6 bits: + * (1) 2^13*1000 > 2^22, + * (2) host->timeout_clk < 2^16 + * => + * (1) / (2) > 2^6 + */ + count = 0; + current_timeout = (1 << 13) * 1000 / host->timeout_clk; + while (current_timeout < target_timeout) { + count++; + current_timeout <<= 1; + if (count >= 0xF) + break; + } + + if (count >= 0xF) { + DBG("%s: Too large timeout 0x%x requested for CMD%d!\n", + mmc_hostname(host->mmc), count, cmd->opcode); + count = 0xE; + } + + return count; +} + +static void sdhci_set_transfer_irqs(struct sdhci_host *host) +{ + u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL; + u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; + + if (host->flags & SDHCI_REQ_USE_DMA) + host->ier = (host->ier & ~pio_irqs) | dma_irqs; + else + host->ier = (host->ier & ~dma_irqs) | pio_irqs; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +} + +static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) +{ + u8 count; + + if (host->ops->set_timeout) { + host->ops->set_timeout(host, cmd); + } else { + count = sdhci_calc_timeout(host, cmd); + sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + } +} + +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +{ + u8 ctrl; + struct mmc_data *data = cmd->data; + int ret; + + WARN_ON(host->data); + + if (data || (cmd->flags & MMC_RSP_BUSY)) + sdhci_set_timeout(host, cmd); + + if (!data) + return; + + /* Sanity checks */ + BUG_ON(data->blksz * data->blocks > 524288); + BUG_ON(data->blksz > host->mmc->max_blk_size); + BUG_ON(data->blocks > 65535); + + host->data = data; + host->data_early = 0; + host->data->bytes_xfered = 0; + + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) + host->flags |= SDHCI_REQ_USE_DMA; + + /* + * FIXME: This doesn't account for merging when mapping the + * scatterlist. + */ + if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + + broken = 0; + if (host->flags & SDHCI_USE_ADMA) { + if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) + broken = 1; + } else { + if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) + broken = 1; + } + + if (unlikely(broken)) { + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->length & 0x3) { + DBG("Reverting to PIO because of " + "transfer size (%d)\n", + sg->length); + host->flags &= ~SDHCI_REQ_USE_DMA; + break; + } + } + } + } + + /* + * The assumption here being that alignment is the same after + * translation to device address space. + */ + if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + + broken = 0; + if (host->flags & SDHCI_USE_ADMA) { + /* + * As we use 3 byte chunks to work around + * alignment problems, we need to check this + * quirk. + */ + if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) + broken = 1; + } else { + if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) + broken = 1; + } + + if (unlikely(broken)) { + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 0x3) { + DBG("Reverting to PIO because of " + "bad alignment\n"); + host->flags &= ~SDHCI_REQ_USE_DMA; + break; + } + } + } + } + + if (host->flags & SDHCI_REQ_USE_DMA) { + if (host->flags & SDHCI_USE_ADMA) { + ret = sdhci_adma_table_pre(host, data); + if (ret) { + /* + * This only happens when someone fed + * us an invalid request. + */ + WARN_ON(1); + host->flags &= ~SDHCI_REQ_USE_DMA; + } else { + sdhci_writel(host, host->adma_addr, + SDHCI_ADMA_ADDRESS); + if (host->flags & SDHCI_USE_64_BIT_DMA) + sdhci_writel(host, + (u64)host->adma_addr >> 32, + SDHCI_ADMA_ADDRESS_HI); + } + } else { + int sg_cnt; + + sg_cnt = sdhci_pre_dma_transfer(host, data, NULL); + if (sg_cnt <= 0) { + /* + * This only happens when someone fed + * us an invalid request. + */ + WARN_ON(1); + host->flags &= ~SDHCI_REQ_USE_DMA; + } else { + WARN_ON(sg_cnt != 1); + sdhci_writel(host, sg_dma_address(data->sg), + SDHCI_DMA_ADDRESS); + } + } + } + + /* + * Always adjust the DMA selection as some controllers + * (e.g. JMicron) can't do PIO properly when the selection + * is ADMA. + */ + if (host->version >= SDHCI_SPEC_200) { + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; + if ((host->flags & SDHCI_REQ_USE_DMA) && + (host->flags & SDHCI_USE_ADMA)) { + if (host->flags & SDHCI_USE_64_BIT_DMA) + ctrl |= SDHCI_CTRL_ADMA64; + else + ctrl |= SDHCI_CTRL_ADMA32; + } else { + ctrl |= SDHCI_CTRL_SDMA; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } + + if (!(host->flags & SDHCI_REQ_USE_DMA)) { + int flags; + + flags = SG_MITER_ATOMIC; + if (host->data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); + host->blocks = data->blocks; + } + + sdhci_set_transfer_irqs(host); + + /* Set the DMA boundary value and block size */ + sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, + data->blksz), SDHCI_BLOCK_SIZE); + sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); +} + +static void sdhci_set_transfer_mode(struct sdhci_host *host, + struct mmc_command *cmd) +{ + u16 mode = 0; + struct mmc_data *data = cmd->data; + + if (data == NULL) { + if (host->quirks2 & + SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) { + sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE); + } else { + /* clear Auto CMD settings for no data CMDs */ + mode = sdhci_readw(host, SDHCI_TRANSFER_MODE); + sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | + SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); + } + return; + } + + WARN_ON(!host->data); + + if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE)) + mode = SDHCI_TRNS_BLK_CNT_EN; + + if (mmc_op_multi(cmd->opcode) || data->blocks > 1) { + mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI; + /* + * If we are sending CMD23, CMD12 never gets sent + * on successful completion (so no Auto-CMD12). + */ + if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) && + (cmd->opcode != SD_IO_RW_EXTENDED)) + mode |= SDHCI_TRNS_AUTO_CMD12; + else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { + mode |= SDHCI_TRNS_AUTO_CMD23; + sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2); + } + } + + if (data->flags & MMC_DATA_READ) + mode |= SDHCI_TRNS_READ; + if (host->flags & SDHCI_REQ_USE_DMA) + mode |= SDHCI_TRNS_DMA; + + sdhci_writew(host, mode, SDHCI_TRANSFER_MODE); +} + +static void sdhci_finish_data(struct sdhci_host *host) +{ + struct mmc_data *data; + + BUG_ON(!host->data); + + data = host->data; + host->data = NULL; + + if (host->flags & SDHCI_REQ_USE_DMA) { + if (host->flags & SDHCI_USE_ADMA) + sdhci_adma_table_post(host, data); + else { + if (!data->host_cookie) + dma_unmap_sg(mmc_dev(host->mmc), + data->sg, data->sg_len, + (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + } + } + + /* + * The specification states that the block count register must + * be updated, but it does not specify at what point in the + * data flow. That makes the register entirely useless to read + * back so we have to assume that nothing made it to the card + * in the event of an error. + */ + if (data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blksz * data->blocks; + + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) + * b) error in multiblock transfer + */ + if (data->stop && + (data->error || + !host->mrq->sbc)) { + + /* + * The controller needs a reset of internal state machines + * upon error conditions. + */ + if (data->error) { + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + } + + sdhci_send_command(host, data->stop); + } else + tasklet_schedule(&host->finish_tasklet); +} + +void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) +{ + int flags; + u32 mask; + unsigned long timeout; + + WARN_ON(host->cmd); + + /* Wait max 10 ms */ + timeout = 10; + + mask = SDHCI_CMD_INHIBIT; + if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) + mask |= SDHCI_DATA_INHIBIT; + + /* We shouldn't wait for data inihibit for stop commands, even + though they might use busy signaling */ + if (host->mrq->data && (cmd == host->mrq->data->stop)) + mask &= ~SDHCI_DATA_INHIBIT; + + while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) { + if (timeout == 0) { + pr_err("%s: Controller never released " + "inhibit bit(s).\n", mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + cmd->error = -EIO; + tasklet_schedule(&host->finish_tasklet); + return; + } + timeout--; + mdelay(1); + } + + timeout = jiffies; + if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else + timeout += 10 * HZ; + mod_timer(&host->timer, timeout); + + host->cmd = cmd; + host->busy_handle = 0; + + sdhci_prepare_data(host, cmd); + + sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); + + sdhci_set_transfer_mode(host, cmd); + + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { + pr_err("%s: Unsupported response type!\n", + mmc_hostname(host->mmc)); + cmd->error = -EINVAL; + tasklet_schedule(&host->finish_tasklet); + return; + } + + if (!(cmd->flags & MMC_RSP_PRESENT)) + flags = SDHCI_CMD_RESP_NONE; + else if (cmd->flags & MMC_RSP_136) + flags = SDHCI_CMD_RESP_LONG; + else if (cmd->flags & MMC_RSP_BUSY) + flags = SDHCI_CMD_RESP_SHORT_BUSY; + else + flags = SDHCI_CMD_RESP_SHORT; + + if (cmd->flags & MMC_RSP_CRC) + flags |= SDHCI_CMD_CRC; + if (cmd->flags & MMC_RSP_OPCODE) + flags |= SDHCI_CMD_INDEX; + + /* CMD19 is special in that the Data Present Select should be set */ + if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK || + cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200) + flags |= SDHCI_CMD_DATA; + + sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); +} +EXPORT_SYMBOL_GPL(sdhci_send_command); + +static void sdhci_finish_command(struct sdhci_host *host) +{ + int i; + + BUG_ON(host->cmd == NULL); + + if (host->cmd->flags & MMC_RSP_PRESENT) { + if (host->cmd->flags & MMC_RSP_136) { + /* CRC is stripped so we need to do some shifting. */ + for (i = 0;i < 4;i++) { + host->cmd->resp[i] = sdhci_readl(host, + SDHCI_RESPONSE + (3-i)*4) << 8; + if (i != 3) + host->cmd->resp[i] |= + sdhci_readb(host, + SDHCI_RESPONSE + (3-i)*4-1); + } + } else { + host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE); + } + } + + host->cmd->error = 0; + + /* Finished CMD23, now send actual command. */ + if (host->cmd == host->mrq->sbc) { + host->cmd = NULL; + sdhci_send_command(host, host->mrq->cmd); + } else { + + /* Processed actual command. */ + if (host->data && host->data_early) + sdhci_finish_data(host); + + if (!host->cmd->data) + tasklet_schedule(&host->finish_tasklet); + + host->cmd = NULL; + } +} + +static u16 sdhci_get_preset_value(struct sdhci_host *host) +{ + u16 preset = 0; + + switch (host->timing) { + case MMC_TIMING_UHS_SDR12: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12); + break; + case MMC_TIMING_UHS_SDR25: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25); + break; + case MMC_TIMING_UHS_SDR50: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50); + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104); + break; + case MMC_TIMING_UHS_DDR50: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50); + break; + case MMC_TIMING_MMC_HS400: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400); + break; + default: + pr_warn("%s: Invalid UHS-I mode selected\n", + mmc_hostname(host->mmc)); + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12); + break; + } + return preset; +} + +void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) +{ + int div = 0; /* Initialized for compiler warning */ + int real_div = div, clk_mul = 1; + u16 clk = 0; + unsigned long timeout; + + host->mmc->actual_clock = 0; + + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + if (host->version >= SDHCI_SPEC_300) { + if (host->preset_enabled) { + u16 pre_val; + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + pre_val = sdhci_get_preset_value(host); + div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK) + >> SDHCI_PRESET_SDCLK_FREQ_SHIFT; + if (host->clk_mul && + (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) { + clk = SDHCI_PROG_CLOCK_MODE; + real_div = div + 1; + clk_mul = host->clk_mul; + } else { + real_div = max_t(int, 1, div << 1); + } + goto clock_set; + } + + /* + * Check if the Host Controller supports Programmable Clock + * Mode. + */ + if (host->clk_mul) { + for (div = 1; div <= 1024; div++) { + if ((host->max_clk * host->clk_mul / div) + <= clock) + break; + } + /* + * Set Programmable Clock Mode in the Clock + * Control register. + */ + clk = SDHCI_PROG_CLOCK_MODE; + real_div = div; + clk_mul = host->clk_mul; + div--; + } else { + /* Version 3.00 divisors must be a multiple of 2. */ + if (host->max_clk <= clock) + div = 1; + else { + for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; + div += 2) { + if ((host->max_clk / div) <= clock) + break; + } + } + real_div = div; + div >>= 1; + } + } else { + /* Version 2.00 divisors must be a power of 2. */ + for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) { + if ((host->max_clk / div) <= clock) + break; + } + real_div = div; + div >>= 1; + } + +clock_set: + if (real_div) + host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div; + clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; + clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) + << SDHCI_DIVIDER_HI_SHIFT; + clk |= SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Wait max 20 ms */ + timeout = 20; + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + pr_err("%s: Internal clock never " + "stabilised.\n", mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return; + } + timeout--; + mdelay(1); + } + + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_set_clock); + +static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) +{ + struct mmc_host *mmc = host->mmc; + u8 pwr = 0; + + if (!IS_ERR(mmc->supply.vmmc)) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + spin_lock_irq(&host->lock); + + if (mode != MMC_POWER_OFF) + sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL); + else + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + return; + } + + if (mode != MMC_POWER_OFF) { + switch (1 << vdd) { + case MMC_VDD_165_195: + pwr = SDHCI_POWER_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + pwr = SDHCI_POWER_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + pwr = SDHCI_POWER_330; + break; + default: + BUG(); + } + } + + if (host->pwr == pwr) + return; + + host->pwr = pwr; + + if (pwr == 0) { + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + vdd = 0; + } else { + /* + * Spec says that we should clear the power reg before setting + * a new value. Some controllers don't seem to like this though. + */ + if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + /* + * At least the Marvell CaFe chip gets confused if we set the + * voltage and set turn on power at the same time, so set the + * voltage first. + */ + if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + + pwr |= SDHCI_POWER_ON; + + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_on(host); + + /* + * Some controllers need an extra 10ms delay of 10ms before + * they can apply clock after applying power + */ + if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) + mdelay(10); + } +} + +/*****************************************************************************\ + * * + * MMC callbacks * + * * +\*****************************************************************************/ + +static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdhci_host *host; + int present; + unsigned long flags; + u32 tuning_opcode; + + host = mmc_priv(mmc); + + sdhci_runtime_pm_get(host); + + /* Firstly check card presence */ + present = sdhci_do_get_cd(host); + + spin_lock_irqsave(&host->lock, flags); + + WARN_ON(host->mrq != NULL); + +#ifndef SDHCI_USE_LEDS_CLASS + sdhci_activate_led(host); +#endif + + /* + * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED + * requests if Auto-CMD12 is enabled. + */ + if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) { + if (mrq->stop) { + mrq->data->stop = NULL; + mrq->stop = NULL; + } + } + + host->mrq = mrq; + + if (!present || host->flags & SDHCI_DEVICE_DEAD) { + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } else { + u32 present_state; + + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + /* + * Check if the re-tuning timer has already expired and there + * is no on-going data transfer and DAT0 is not busy. If so, + * we need to execute tuning procedure before sending command. + */ + if ((host->flags & SDHCI_NEEDS_RETUNING) && + !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ)) && + (present_state & SDHCI_DATA_0_LVL_MASK)) { + if (mmc->card) { + /* eMMC uses cmd21 but sd and sdio use cmd19 */ + tuning_opcode = + mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; + + /* Here we need to set the host->mrq to NULL, + * in case the pending finish_tasklet + * finishes it incorrectly. + */ + host->mrq = NULL; + + spin_unlock_irqrestore(&host->lock, flags); + sdhci_execute_tuning(mmc, tuning_opcode); + spin_lock_irqsave(&host->lock, flags); + + /* Restore original mmc_request structure */ + host->mrq = mrq; + } + } + + if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) + sdhci_send_command(host, mrq->sbc); + else + sdhci_send_command(host, mrq->cmd); + } + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); +} + +void sdhci_set_bus_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if (width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + if (host->version >= SDHCI_SPEC_300) + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + if (host->version >= SDHCI_SPEC_300) + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_set_bus_width); + +void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing) +{ + u16 ctrl_2; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if ((timing == MMC_TIMING_MMC_HS200) || + (timing == MMC_TIMING_UHS_SDR104)) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (timing == MMC_TIMING_UHS_SDR12) + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + else if (timing == MMC_TIMING_UHS_SDR25) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (timing == MMC_TIMING_UHS_SDR50) + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + else if ((timing == MMC_TIMING_UHS_DDR50) || + (timing == MMC_TIMING_MMC_DDR52)) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + else if (timing == MMC_TIMING_MMC_HS400) + ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */ + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} +EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling); + +static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) +{ + unsigned long flags; + u8 ctrl; + struct mmc_host *mmc = host->mmc; + + spin_lock_irqsave(&host->lock, flags); + + if (host->flags & SDHCI_DEVICE_DEAD) { + spin_unlock_irqrestore(&host->lock, flags); + if (!IS_ERR(mmc->supply.vmmc) && + ios->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + return; + } + + /* + * Reset the chip on each power off. + * Should clear out any weird states. + */ + if (ios->power_mode == MMC_POWER_OFF) { + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); + sdhci_reinit(host); + } + + if (host->version >= SDHCI_SPEC_300 && + (ios->power_mode == MMC_POWER_UP) && + !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) + sdhci_enable_preset_value(host, false); + + if (!ios->clock || ios->clock != host->clock) { + host->ops->set_clock(host, ios->clock); + host->clock = ios->clock; + + if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK && + host->clock) { + host->timeout_clk = host->mmc->actual_clock ? + host->mmc->actual_clock / 1000 : + host->clock / 1000; + host->mmc->max_busy_timeout = + host->ops->get_max_timeout_count ? + host->ops->get_max_timeout_count(host) : + 1 << 27; + host->mmc->max_busy_timeout /= host->timeout_clk; + } + } + + sdhci_set_power(host, ios->power_mode, ios->vdd); + + if (host->ops->platform_send_init_74_clocks) + host->ops->platform_send_init_74_clocks(host, ios->power_mode); + + host->ops->set_bus_width(host, ios->bus_width); + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + + if ((ios->timing == MMC_TIMING_SD_HS || + ios->timing == MMC_TIMING_MMC_HS) + && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)) + ctrl |= SDHCI_CTRL_HISPD; + else + ctrl &= ~SDHCI_CTRL_HISPD; + + if (host->version >= SDHCI_SPEC_300) { + u16 clk, ctrl_2; + + /* In case of UHS-I modes, set High Speed Enable */ + if ((ios->timing == MMC_TIMING_MMC_HS400) || + (ios->timing == MMC_TIMING_MMC_HS200) || + (ios->timing == MMC_TIMING_MMC_DDR52) || + (ios->timing == MMC_TIMING_UHS_SDR50) || + (ios->timing == MMC_TIMING_UHS_SDR104) || + (ios->timing == MMC_TIMING_UHS_DDR50) || + (ios->timing == MMC_TIMING_UHS_SDR25)) + ctrl |= SDHCI_CTRL_HISPD; + + if (!host->preset_enabled) { + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + /* + * We only need to set Driver Strength if the + * preset value enable is not set. + */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; + if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; + else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C; + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + } else { + /* + * According to SDHC Spec v3.00, if the Preset Value + * Enable in the Host Control 2 register is set, we + * need to reset SD Clock Enable before changing High + * Speed Enable to avoid generating clock gliches. + */ + + /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + /* Re-enable SD Clock */ + host->ops->set_clock(host, host->clock); + } + + /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + host->ops->set_uhs_signaling(host, ios->timing); + host->timing = ios->timing; + + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) && + ((ios->timing == MMC_TIMING_UHS_SDR12) || + (ios->timing == MMC_TIMING_UHS_SDR25) || + (ios->timing == MMC_TIMING_UHS_SDR50) || + (ios->timing == MMC_TIMING_UHS_SDR104) || + (ios->timing == MMC_TIMING_UHS_DDR50))) { + u16 preset; + + sdhci_enable_preset_value(host, true); + preset = sdhci_get_preset_value(host); + ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK) + >> SDHCI_PRESET_DRV_SHIFT; + } + + /* Re-enable SD Clock */ + host->ops->set_clock(host, host->clock); + } else + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + /* + * Some (ENE) controllers go apeshit on some ios operation, + * signalling timeout and CRC errors even on CMD0. Resetting + * it on each ios seems to solve the problem. + */ + if (host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) + sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + + sdhci_runtime_pm_get(host); + sdhci_do_set_ios(host, ios); + sdhci_runtime_pm_put(host); +} + +static int sdhci_do_get_cd(struct sdhci_host *host) +{ + int gpio_cd = mmc_gpio_get_cd(host->mmc); + + if (host->flags & SDHCI_DEVICE_DEAD) + return 0; + + /* If polling/nonremovable, assume that the card is always present. */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) + return 1; + + /* Try slot gpio detect */ + if (!IS_ERR_VALUE(gpio_cd)) + return !!gpio_cd; + + /* Host native card detect */ + return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); +} + +static int sdhci_get_cd(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + int ret; + + sdhci_runtime_pm_get(host); + ret = sdhci_do_get_cd(host); + sdhci_runtime_pm_put(host); + return ret; +} + +static int sdhci_check_ro(struct sdhci_host *host) +{ + unsigned long flags; + int is_readonly; + + spin_lock_irqsave(&host->lock, flags); + + if (host->flags & SDHCI_DEVICE_DEAD) + is_readonly = 0; + else if (host->ops->get_ro) + is_readonly = host->ops->get_ro(host); + else + is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE) + & SDHCI_WRITE_PROTECT); + + spin_unlock_irqrestore(&host->lock, flags); + + /* This quirk needs to be replaced by a callback-function later */ + return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ? + !is_readonly : is_readonly; +} + +#define SAMPLE_COUNT 5 + +static int sdhci_do_get_ro(struct sdhci_host *host) +{ + int i, ro_count; + + if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT)) + return sdhci_check_ro(host); + + ro_count = 0; + for (i = 0; i < SAMPLE_COUNT; i++) { + if (sdhci_check_ro(host)) { + if (++ro_count > SAMPLE_COUNT / 2) + return 1; + } + msleep(30); + } + return 0; +} + +static void sdhci_hw_reset(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + + if (host->ops && host->ops->hw_reset) + host->ops->hw_reset(host); +} + +static int sdhci_get_ro(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + int ret; + + sdhci_runtime_pm_get(host); + ret = sdhci_do_get_ro(host); + sdhci_runtime_pm_put(host); + return ret; +} + +static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable) +{ + if (!(host->flags & SDHCI_DEVICE_DEAD)) { + if (enable) + host->ier |= SDHCI_INT_CARD_INT; + else + host->ier &= ~SDHCI_INT_CARD_INT; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + mmiowb(); + } +} + +static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + + sdhci_runtime_pm_get(host); + + spin_lock_irqsave(&host->lock, flags); + if (enable) + host->flags |= SDHCI_SDIO_IRQ_ENABLED; + else + host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; + + sdhci_enable_sdio_irq_nolock(host, enable); + spin_unlock_irqrestore(&host->lock, flags); + + sdhci_runtime_pm_put(host); +} + +static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, + struct mmc_ios *ios) +{ + struct mmc_host *mmc = host->mmc; + u16 ctrl; + int ret; + + /* + * Signal Voltage Switching is only applicable for Host Controllers + * v3.00 and above. + */ + if (host->version < SDHCI_SPEC_300) + return 0; + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + /* Set 1.8V Signal Enable in the Host Control2 register to 0 */ + ctrl &= ~SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000, + 3600000); + if (ret) { + pr_warn("%s: Switching to 3.3V signalling voltage failed\n", + mmc_hostname(mmc)); + return -EIO; + } + } + /* Wait for 5ms */ + usleep_range(5000, 5500); + + /* 3.3V regulator output should be stable within 5 ms */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_VDD_180)) + return 0; + + pr_warn("%s: 3.3V regulator output did not became stable\n", + mmc_hostname(mmc)); + + return -EAGAIN; + case MMC_SIGNAL_VOLTAGE_180: + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, + 1700000, 1950000); + if (ret) { + pr_warn("%s: Switching to 1.8V signalling voltage failed\n", + mmc_hostname(mmc)); + return -EIO; + } + } + + /* + * Enable 1.8V Signal Enable in the Host Control2 + * register + */ + ctrl |= SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* Some controller need to do more when switching */ + if (host->ops->voltage_switch) + host->ops->voltage_switch(host); + + /* 1.8V regulator output should be stable within 5 ms */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ctrl & SDHCI_CTRL_VDD_180) + return 0; + + pr_warn("%s: 1.8V regulator output did not became stable\n", + mmc_hostname(mmc)); + + return -EAGAIN; + case MMC_SIGNAL_VOLTAGE_120: + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000, + 1300000); + if (ret) { + pr_warn("%s: Switching to 1.2V signalling voltage failed\n", + mmc_hostname(mmc)); + return -EIO; + } + } + return 0; + default: + /* No signal voltage switch required */ + return 0; + } +} + +static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + int err; + + if (host->version < SDHCI_SPEC_300) + return 0; + sdhci_runtime_pm_get(host); + err = sdhci_do_start_signal_voltage_switch(host, ios); + sdhci_runtime_pm_put(host); + return err; +} + +static int sdhci_card_busy(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 present_state; + + sdhci_runtime_pm_get(host); + /* Check whether DAT[3:0] is 0000 */ + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + sdhci_runtime_pm_put(host); + + return !(present_state & SDHCI_DATA_LVL_MASK); +} + +static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->flags |= SDHCI_HS400_TUNING; + spin_unlock_irqrestore(&host->lock, flags); + + return 0; +} + +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + u16 ctrl; + int tuning_loop_counter = MAX_TUNING_LOOP; + int err = 0; + unsigned long flags; + unsigned int tuning_count = 0; + bool hs400_tuning; + + sdhci_runtime_pm_get(host); + spin_lock_irqsave(&host->lock, flags); + + hs400_tuning = host->flags & SDHCI_HS400_TUNING; + host->flags &= ~SDHCI_HS400_TUNING; + + if (host->tuning_mode == SDHCI_TUNING_MODE_1) + tuning_count = host->tuning_count; + + /* + * The Host Controller needs tuning only in case of SDR104 mode + * and for SDR50 mode when Use Tuning for SDR50 is set in the + * Capabilities register. + * If the Host Controller supports the HS200 mode then the + * tuning function has to be executed. + */ + switch (host->timing) { + /* HS400 tuning is done in HS200 mode */ + case MMC_TIMING_MMC_HS400: + err = -EINVAL; + goto out_unlock; + + case MMC_TIMING_MMC_HS200: + /* + * Periodic re-tuning for HS400 is not expected to be needed, so + * disable it here. + */ + if (hs400_tuning) + tuning_count = 0; + break; + + case MMC_TIMING_UHS_SDR104: + break; + + case MMC_TIMING_UHS_SDR50: + if (host->flags & SDHCI_SDR50_NEEDS_TUNING || + host->flags & SDHCI_SDR104_NEEDS_TUNING) + break; + /* FALLTHROUGH */ + + default: + goto out_unlock; + } + + if (host->ops->platform_execute_tuning) { + spin_unlock_irqrestore(&host->lock, flags); + err = host->ops->platform_execute_tuning(host, opcode); + sdhci_runtime_pm_put(host); + return err; + } + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl |= SDHCI_CTRL_EXEC_TUNING; + if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND) + ctrl |= SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* + * As per the Host Controller spec v3.00, tuning command + * generates Buffer Read Ready interrupt, so enable that. + * + * Note: The spec clearly says that when tuning sequence + * is being performed, the controller does not generate + * interrupts other than Buffer Read Ready interrupt. But + * to make sure we don't hit a controller bug, we _only_ + * enable Buffer Read Ready interrupt here. + */ + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); + + /* + * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number + * of loops reaches 40 times or a timeout of 150ms occurs. + */ + do { + struct mmc_command cmd = {0}; + struct mmc_request mrq = {NULL}; + + cmd.opcode = opcode; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.retries = 0; + cmd.data = NULL; + cmd.error = 0; + + if (tuning_loop_counter-- == 0) + break; + + mrq.cmd = &cmd; + host->mrq = &mrq; + + /* + * In response to CMD19, the card sends 64 bytes of tuning + * block to the Host Controller. So we set the block size + * to 64 here. + */ + if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) { + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128), + SDHCI_BLOCK_SIZE); + else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), + SDHCI_BLOCK_SIZE); + } else { + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), + SDHCI_BLOCK_SIZE); + } + + /* + * The tuning block is sent by the card to the host controller. + * So we set the TRNS_READ bit in the Transfer Mode register. + * This also takes care of setting DMA Enable and Multi Block + * Select in the same register to 0. + */ + sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE); + + sdhci_send_command(host, &cmd); + + host->cmd = NULL; + host->mrq = NULL; + + spin_unlock_irqrestore(&host->lock, flags); + /* Wait for Buffer Read Ready interrupt */ + wait_event_interruptible_timeout(host->buf_ready_int, + (host->tuning_done == 1), + msecs_to_jiffies(50)); + spin_lock_irqsave(&host->lock, flags); + + if (!host->tuning_done) { + pr_info(DRIVER_NAME ": Timeout waiting for " + "Buffer Read Ready interrupt during tuning " + "procedure, falling back to fixed sampling " + "clock\n"); + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl &= ~SDHCI_CTRL_TUNED_CLK; + ctrl &= ~SDHCI_CTRL_EXEC_TUNING; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + err = -EIO; + goto out; + } + + host->tuning_done = 0; + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* eMMC spec does not require a delay between tuning cycles */ + if (opcode == MMC_SEND_TUNING_BLOCK) + mdelay(1); + } while (ctrl & SDHCI_CTRL_EXEC_TUNING); + + /* + * The Host Driver has exhausted the maximum number of loops allowed, + * so use fixed sampling frequency. + */ + if (tuning_loop_counter < 0) { + ctrl &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + } + if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) { + pr_info(DRIVER_NAME ": Tuning procedure" + " failed, falling back to fixed sampling" + " clock\n"); + err = -EIO; + } + +out: + host->flags &= ~SDHCI_NEEDS_RETUNING; + + if (tuning_count) { + host->flags |= SDHCI_USING_RETUNING_TIMER; + mod_timer(&host->tuning_timer, jiffies + tuning_count * HZ); + } + + /* + * In case tuning fails, host controllers which support re-tuning can + * try tuning again at a later time, when the re-tuning timer expires. + * So for these controllers, we return 0. Since there might be other + * controllers who do not have this capability, we return error for + * them. SDHCI_USING_RETUNING_TIMER means the host is currently using + * a retuning timer to do the retuning for the card. + */ + if (err && (host->flags & SDHCI_USING_RETUNING_TIMER)) + err = 0; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +out_unlock: + spin_unlock_irqrestore(&host->lock, flags); + sdhci_runtime_pm_put(host); + + return err; +} + + +static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) +{ + /* Host Controller v3.00 defines preset value registers */ + if (host->version < SDHCI_SPEC_300) + return; + + /* + * We only enable or disable Preset Value if they are not already + * enabled or disabled respectively. Otherwise, we bail out. + */ + if (host->preset_enabled != enable) { + u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + if (enable) + ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE; + else + ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; + + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + if (enable) + host->flags |= SDHCI_PV_ENABLED; + else + host->flags &= ~SDHCI_PV_ENABLED; + + host->preset_enabled = enable; + } +} + +static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq, + int err) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (host->flags & SDHCI_REQ_USE_DMA) { + if (data->host_cookie) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + data->flags & MMC_DATA_WRITE ? + DMA_TO_DEVICE : DMA_FROM_DEVICE); + mrq->data->host_cookie = 0; + } +} + +static int sdhci_pre_dma_transfer(struct sdhci_host *host, + struct mmc_data *data, + struct sdhci_host_next *next) +{ + int sg_count; + + if (!next && data->host_cookie && + data->host_cookie != host->next_data.cookie) { + pr_debug(DRIVER_NAME "[%s] invalid cookie: %d, next-cookie %d\n", + __func__, data->host_cookie, host->next_data.cookie); + data->host_cookie = 0; + } + + /* Check if next job is already prepared */ + if (next || + (!next && data->host_cookie != host->next_data.cookie)) { + sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, + data->flags & MMC_DATA_WRITE ? + DMA_TO_DEVICE : DMA_FROM_DEVICE); + + } else { + sg_count = host->next_data.sg_count; + host->next_data.sg_count = 0; + } + + + if (sg_count == 0) + return -EINVAL; + + if (next) { + next->sg_count = sg_count; + data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie; + } else + host->sg_count = sg_count; + + return sg_count; +} + +static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq, + bool is_first_req) +{ + struct sdhci_host *host = mmc_priv(mmc); + + if (mrq->data->host_cookie) { + mrq->data->host_cookie = 0; + return; + } + + if (host->flags & SDHCI_REQ_USE_DMA) + if (sdhci_pre_dma_transfer(host, + mrq->data, + &host->next_data) < 0) + mrq->data->host_cookie = 0; +} + +static void sdhci_card_event(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + int present; + + /* First check if client has provided their own card event */ + if (host->ops->card_event) + host->ops->card_event(host); + + present = sdhci_do_get_cd(host); + + spin_lock_irqsave(&host->lock, flags); + + /* Check host->mrq first in case we are runtime suspended */ + if (host->mrq && !present) { + pr_err("%s: Card removed during transfer!\n", + mmc_hostname(host->mmc)); + pr_err("%s: Resetting controller.\n", + mmc_hostname(host->mmc)); + + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } + + spin_unlock_irqrestore(&host->lock, flags); +} + +static const struct mmc_host_ops sdhci_ops = { + .request = sdhci_request, + .post_req = sdhci_post_req, + .pre_req = sdhci_pre_req, + .set_ios = sdhci_set_ios, + .get_cd = sdhci_get_cd, + .get_ro = sdhci_get_ro, + .hw_reset = sdhci_hw_reset, + .enable_sdio_irq = sdhci_enable_sdio_irq, + .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, + .prepare_hs400_tuning = sdhci_prepare_hs400_tuning, + .execute_tuning = sdhci_execute_tuning, + .card_event = sdhci_card_event, + .card_busy = sdhci_card_busy, +}; + +/*****************************************************************************\ + * * + * Tasklets * + * * +\*****************************************************************************/ + +static void sdhci_tasklet_finish(unsigned long param) +{ + struct sdhci_host *host; + unsigned long flags; + struct mmc_request *mrq; + + host = (struct sdhci_host*)param; + + spin_lock_irqsave(&host->lock, flags); + + /* + * If this tasklet gets rescheduled while running, it will + * be run again afterwards but without any active request. + */ + if (!host->mrq) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + del_timer(&host->timer); + + mrq = host->mrq; + + /* + * The controller needs a reset of internal state machines + * upon error conditions. + */ + if (!(host->flags & SDHCI_DEVICE_DEAD) && + ((mrq->cmd && mrq->cmd->error) || + (mrq->sbc && mrq->sbc->error) || + (mrq->data && ((mrq->data->error && !mrq->data->stop) || + (mrq->data->stop && mrq->data->stop->error))) || + (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { + + /* Some controllers need this kick or reset won't work here */ + if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) + /* This is to force an update */ + host->ops->set_clock(host, host->clock); + + /* Spec says we should do both at the same time, but Ricoh + controllers do not like that. */ + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + } + + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + +#ifndef SDHCI_USE_LEDS_CLASS + sdhci_deactivate_led(host); +#endif + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + + mmc_request_done(host->mmc, mrq); + sdhci_runtime_pm_put(host); +} + +static void sdhci_timeout_timer(unsigned long data) +{ + struct sdhci_host *host; + unsigned long flags; + + host = (struct sdhci_host*)data; + + spin_lock_irqsave(&host->lock, flags); + + if (host->mrq) { + pr_err("%s: Timeout waiting for hardware " + "interrupt.\n", mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + + if (host->data) { + host->data->error = -ETIMEDOUT; + sdhci_finish_data(host); + } else { + if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + host->mrq->cmd->error = -ETIMEDOUT; + + tasklet_schedule(&host->finish_tasklet); + } + } + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void sdhci_tuning_timer(unsigned long data) +{ + struct sdhci_host *host; + unsigned long flags; + + host = (struct sdhci_host *)data; + + spin_lock_irqsave(&host->lock, flags); + + host->flags |= SDHCI_NEEDS_RETUNING; + + spin_unlock_irqrestore(&host->lock, flags); +} + +/*****************************************************************************\ + * * + * Interrupt handling * + * * +\*****************************************************************************/ + +static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask) +{ + BUG_ON(intmask == 0); + + if (!host->cmd) { + pr_err("%s: Got command interrupt 0x%08x even " + "though no command operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + sdhci_dumpregs(host); + return; + } + + if (intmask & SDHCI_INT_TIMEOUT) + host->cmd->error = -ETIMEDOUT; + else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT | + SDHCI_INT_INDEX)) + host->cmd->error = -EILSEQ; + + if (host->cmd->error) { + tasklet_schedule(&host->finish_tasklet); + return; + } + + /* + * The host can send and interrupt when the busy state has + * ended, allowing us to wait without wasting CPU cycles. + * Unfortunately this is overloaded on the "data complete" + * interrupt, so we need to take some care when handling + * it. + * + * Note: The 1.0 specification is a bit ambiguous about this + * feature so there might be some problems with older + * controllers. + */ + if (host->cmd->flags & MMC_RSP_BUSY) { + if (host->cmd->data) + DBG("Cannot wait for busy signal when also " + "doing a data transfer"); + else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) + && !host->busy_handle) { + /* Mark that command complete before busy is ended */ + host->busy_handle = 1; + return; + } + + /* The controller does not support the end-of-busy IRQ, + * fall through and take the SDHCI_INT_RESPONSE */ + } else if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) && + host->cmd->opcode == MMC_STOP_TRANSMISSION && !host->data) { + *mask &= ~SDHCI_INT_DATA_END; + } + + if (intmask & SDHCI_INT_RESPONSE) + sdhci_finish_command(host); +} + +#ifdef CONFIG_MMC_DEBUG +static void sdhci_adma_show_error(struct sdhci_host *host) +{ + const char *name = mmc_hostname(host->mmc); + void *desc = host->adma_table; + + sdhci_dumpregs(host); + + while (true) { + struct sdhci_adma2_64_desc *dma_desc = desc; + + if (host->flags & SDHCI_USE_64_BIT_DMA) + DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n", + name, desc, le32_to_cpu(dma_desc->addr_hi), + le32_to_cpu(dma_desc->addr_lo), + le16_to_cpu(dma_desc->len), + le16_to_cpu(dma_desc->cmd)); + else + DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n", + name, desc, le32_to_cpu(dma_desc->addr_lo), + le16_to_cpu(dma_desc->len), + le16_to_cpu(dma_desc->cmd)); + + desc += host->desc_sz; + + if (dma_desc->cmd & cpu_to_le16(ADMA2_END)) + break; + } +} +#else +static void sdhci_adma_show_error(struct sdhci_host *host) { } +#endif + +static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) +{ + u32 command; + BUG_ON(intmask == 0); + + /* CMD19 generates _only_ Buffer Read Ready interrupt */ + if (intmask & SDHCI_INT_DATA_AVAIL) { + command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)); + if (command == MMC_SEND_TUNING_BLOCK || + command == MMC_SEND_TUNING_BLOCK_HS200) { + host->tuning_done = 1; + wake_up(&host->buf_ready_int); + return; + } + } + + if (!host->data) { + /* + * The "data complete" interrupt is also used to + * indicate that a busy state has ended. See comment + * above in sdhci_cmd_irq(). + */ + if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { + if (intmask & SDHCI_INT_DATA_TIMEOUT) { + host->cmd->error = -ETIMEDOUT; + tasklet_schedule(&host->finish_tasklet); + return; + } + if (intmask & SDHCI_INT_DATA_END) { + /* + * Some cards handle busy-end interrupt + * before the command completed, so make + * sure we do things in the proper order. + */ + if (host->busy_handle) + sdhci_finish_command(host); + else + host->busy_handle = 1; + return; + } + } + + pr_err("%s: Got data interrupt 0x%08x even " + "though no data operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + sdhci_dumpregs(host); + + return; + } + + if (intmask & SDHCI_INT_DATA_TIMEOUT) + host->data->error = -ETIMEDOUT; + else if (intmask & SDHCI_INT_DATA_END_BIT) + host->data->error = -EILSEQ; + else if ((intmask & SDHCI_INT_DATA_CRC) && + SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) + != MMC_BUS_TEST_R) + host->data->error = -EILSEQ; + else if (intmask & SDHCI_INT_ADMA_ERROR) { + pr_err("%s: ADMA error\n", mmc_hostname(host->mmc)); + sdhci_adma_show_error(host); + host->data->error = -EIO; + if (host->ops->adma_workaround) + host->ops->adma_workaround(host, intmask); + } + + if (host->data->error) + sdhci_finish_data(host); + else { + if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) + sdhci_transfer_pio(host); + + /* + * We currently don't do anything fancy with DMA + * boundaries, but as we can't disable the feature + * we need to at least restart the transfer. + * + * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS) + * should return a valid address to continue from, but as + * some controllers are faulty, don't trust them. + */ + if (intmask & SDHCI_INT_DMA_END) { + u32 dmastart, dmanow; + dmastart = sg_dma_address(host->data->sg); + dmanow = dmastart + host->data->bytes_xfered; + /* + * Force update to the next DMA block boundary. + */ + dmanow = (dmanow & + ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) + + SDHCI_DEFAULT_BOUNDARY_SIZE; + host->data->bytes_xfered = dmanow - dmastart; + DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes," + " next 0x%08x\n", + mmc_hostname(host->mmc), dmastart, + host->data->bytes_xfered, dmanow); + sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS); + } + + if (intmask & SDHCI_INT_DATA_END) { + if (host->cmd) { + /* + * Data managed to finish before the + * command completed. Make sure we do + * things in the proper order. + */ + host->data_early = 1; + } else { + sdhci_finish_data(host); + } + } + } +} + +static irqreturn_t sdhci_irq(int irq, void *dev_id) +{ + irqreturn_t result = IRQ_NONE; + struct sdhci_host *host = dev_id; + u32 intmask, mask, unexpected = 0; + int max_loops = 16; + + spin_lock(&host->lock); + + if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) { + spin_unlock(&host->lock); + return IRQ_NONE; + } + + intmask = sdhci_readl(host, SDHCI_INT_STATUS); + if (!intmask || intmask == 0xffffffff) { + result = IRQ_NONE; + goto out; + } + + do { + /* Clear selected interrupts. */ + mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_BUS_POWER); + sdhci_writel(host, mask, SDHCI_INT_STATUS); + + DBG("*** %s got interrupt: 0x%08x\n", + mmc_hostname(host->mmc), intmask); + + if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { + u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; + + /* + * There is a observation on i.mx esdhc. INSERT + * bit will be immediately set again when it gets + * cleared, if a card is inserted. We have to mask + * the irq to prevent interrupt storm which will + * freeze the system. And the REMOVE gets the + * same situation. + * + * More testing are needed here to ensure it works + * for other platforms though. + */ + host->ier &= ~(SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE); + host->ier |= present ? SDHCI_INT_CARD_REMOVE : + SDHCI_INT_CARD_INSERT; + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + + sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS); + + host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE); + result = IRQ_WAKE_THREAD; + } + + if (intmask & SDHCI_INT_CMD_MASK) + sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK, + &intmask); + + if (intmask & SDHCI_INT_DATA_MASK) + sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); + + if (intmask & SDHCI_INT_BUS_POWER) + pr_err("%s: Card is consuming too much power!\n", + mmc_hostname(host->mmc)); + + if (intmask & SDHCI_INT_CARD_INT) { + sdhci_enable_sdio_irq_nolock(host, false); + host->thread_isr |= SDHCI_INT_CARD_INT; + result = IRQ_WAKE_THREAD; + } + + intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | + SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER | + SDHCI_INT_CARD_INT); + + if (intmask) { + unexpected |= intmask; + sdhci_writel(host, intmask, SDHCI_INT_STATUS); + } + + if (result == IRQ_NONE) + result = IRQ_HANDLED; + + intmask = sdhci_readl(host, SDHCI_INT_STATUS); + } while (intmask && --max_loops); +out: + spin_unlock(&host->lock); + + if (unexpected) { + pr_err("%s: Unexpected interrupt 0x%08x.\n", + mmc_hostname(host->mmc), unexpected); + sdhci_dumpregs(host); + } + + return result; +} + +static irqreturn_t sdhci_thread_irq(int irq, void *dev_id) +{ + struct sdhci_host *host = dev_id; + unsigned long flags; + u32 isr; + + spin_lock_irqsave(&host->lock, flags); + isr = host->thread_isr; + host->thread_isr = 0; + spin_unlock_irqrestore(&host->lock, flags); + + if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { + sdhci_card_event(host->mmc); + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + } + + if (isr & SDHCI_INT_CARD_INT) { + sdio_run_irqs(host->mmc); + + spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_SDIO_IRQ_ENABLED) + sdhci_enable_sdio_irq_nolock(host, true); + spin_unlock_irqrestore(&host->lock, flags); + } + + return isr ? IRQ_HANDLED : IRQ_NONE; +} + +/*****************************************************************************\ + * * + * Suspend/resume * + * * +\*****************************************************************************/ + +#ifdef CONFIG_PM +void sdhci_enable_irq_wakeups(struct sdhci_host *host) +{ + u8 val; + u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE + | SDHCI_WAKE_ON_INT; + + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val |= mask ; + /* Avoid fake wake up */ + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) + val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE); + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups); + +static void sdhci_disable_irq_wakeups(struct sdhci_host *host) +{ + u8 val; + u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE + | SDHCI_WAKE_ON_INT; + + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val &= ~mask; + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} + +int sdhci_suspend_host(struct sdhci_host *host) +{ + sdhci_disable_card_detection(host); + + /* Disable tuning since we are suspending */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + } + + if (!device_may_wakeup(mmc_dev(host->mmc))) { + host->ier = 0; + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); + free_irq(host->irq, host); + } else { + sdhci_enable_irq_wakeups(host); + enable_irq_wake(host->irq); + } + return 0; +} + +EXPORT_SYMBOL_GPL(sdhci_suspend_host); + +int sdhci_resume_host(struct sdhci_host *host) +{ + int ret = 0; + + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } + + if (!device_may_wakeup(mmc_dev(host->mmc))) { + ret = request_threaded_irq(host->irq, sdhci_irq, + sdhci_thread_irq, IRQF_SHARED, + mmc_hostname(host->mmc), host); + if (ret) + return ret; + } else { + sdhci_disable_irq_wakeups(host); + disable_irq_wake(host->irq); + } + + if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) && + (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) { + /* Card keeps power but host controller does not */ + sdhci_init(host, 0); + host->pwr = 0; + host->clock = 0; + sdhci_do_set_ios(host, &host->mmc->ios); + } else { + sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); + mmiowb(); + } + + sdhci_enable_card_detection(host); + + /* Set the re-tuning expiration flag */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) + host->flags |= SDHCI_NEEDS_RETUNING; + + return ret; +} + +EXPORT_SYMBOL_GPL(sdhci_resume_host); + +static int sdhci_runtime_pm_get(struct sdhci_host *host) +{ + return pm_runtime_get_sync(host->mmc->parent); +} + +static int sdhci_runtime_pm_put(struct sdhci_host *host) +{ + pm_runtime_mark_last_busy(host->mmc->parent); + return pm_runtime_put_autosuspend(host->mmc->parent); +} + +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) +{ + if (host->runtime_suspended || host->bus_on) + return; + host->bus_on = true; + pm_runtime_get_noresume(host->mmc->parent); +} + +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +{ + if (host->runtime_suspended || !host->bus_on) + return; + host->bus_on = false; + pm_runtime_put_noidle(host->mmc->parent); +} + +int sdhci_runtime_suspend_host(struct sdhci_host *host) +{ + unsigned long flags; + + /* Disable tuning since we are suspending */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + } + + spin_lock_irqsave(&host->lock, flags); + host->ier &= SDHCI_INT_CARD_INT; + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + spin_unlock_irqrestore(&host->lock, flags); + + synchronize_hardirq(host->irq); + + spin_lock_irqsave(&host->lock, flags); + host->runtime_suspended = true; + spin_unlock_irqrestore(&host->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host); + +int sdhci_runtime_resume_host(struct sdhci_host *host) +{ + unsigned long flags; + int host_flags = host->flags; + + if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } + + sdhci_init(host, 0); + + /* Force clock and power re-program */ + host->pwr = 0; + host->clock = 0; + sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); + sdhci_do_set_ios(host, &host->mmc->ios); + + if ((host_flags & SDHCI_PV_ENABLED) && + !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) { + spin_lock_irqsave(&host->lock, flags); + sdhci_enable_preset_value(host, true); + spin_unlock_irqrestore(&host->lock, flags); + } + + /* Set the re-tuning expiration flag */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) + host->flags |= SDHCI_NEEDS_RETUNING; + + spin_lock_irqsave(&host->lock, flags); + + host->runtime_suspended = false; + + /* Enable SDIO IRQ */ + if (host->flags & SDHCI_SDIO_IRQ_ENABLED) + sdhci_enable_sdio_irq_nolock(host, true); + + /* Enable Card Detection */ + sdhci_enable_card_detection(host); + + spin_unlock_irqrestore(&host->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host); + +#endif /* CONFIG_PM */ + +/*****************************************************************************\ + * * + * Device allocation/registration * + * * +\*****************************************************************************/ + +struct sdhci_host *sdhci_alloc_host(struct device *dev, + size_t priv_size) +{ + struct mmc_host *mmc; + struct sdhci_host *host; + + WARN_ON(dev == NULL); + + mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev); + if (!mmc) + return ERR_PTR(-ENOMEM); + + host = mmc_priv(mmc); + host->mmc = mmc; + + return host; +} + +EXPORT_SYMBOL_GPL(sdhci_alloc_host); + +int sdhci_add_host(struct sdhci_host *host) +{ + struct mmc_host *mmc; + u32 caps[2] = {0, 0}; + u32 max_current_caps; + unsigned int ocr_avail; + unsigned int override_timeout_clk; + int ret; + + WARN_ON(host == NULL); + if (host == NULL) + return -EINVAL; + + mmc = host->mmc; + + if (debug_quirks) + host->quirks = debug_quirks; + if (debug_quirks2) + host->quirks2 = debug_quirks2; + + override_timeout_clk = host->timeout_clk; + + sdhci_do_reset(host, SDHCI_RESET_ALL); + + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + host->version = (host->version & SDHCI_SPEC_VER_MASK) + >> SDHCI_SPEC_VER_SHIFT; + if (host->version > SDHCI_SPEC_300) { + pr_err("%s: Unknown controller version (%d). " + "You may experience problems.\n", mmc_hostname(mmc), + host->version); + } + + caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : + sdhci_readl(host, SDHCI_CAPABILITIES); + + if (host->version >= SDHCI_SPEC_300) + caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? + host->caps1 : + sdhci_readl(host, SDHCI_CAPABILITIES_1); + + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) + host->flags |= SDHCI_USE_SDMA; + else if (!(caps[0] & SDHCI_CAN_DO_SDMA)) + DBG("Controller doesn't have SDMA capability\n"); + else + host->flags |= SDHCI_USE_SDMA; + + if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) && + (host->flags & SDHCI_USE_SDMA)) { + DBG("Disabling DMA as it is marked broken\n"); + host->flags &= ~SDHCI_USE_SDMA; + } + + if ((host->version >= SDHCI_SPEC_200) && + (caps[0] & SDHCI_CAN_DO_ADMA2)) + host->flags |= SDHCI_USE_ADMA; + + if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) && + (host->flags & SDHCI_USE_ADMA)) { + DBG("Disabling ADMA as it is marked broken\n"); + host->flags &= ~SDHCI_USE_ADMA; + } + + /* + * It is assumed that a 64-bit capable device has set a 64-bit DMA mask + * and *must* do 64-bit DMA. A driver has the opportunity to change + * that during the first call to ->enable_dma(). Similarly + * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to + * implement. + */ + if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) + host->flags |= SDHCI_USE_64_BIT_DMA; + + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + if (host->ops->enable_dma) { + if (host->ops->enable_dma(host)) { + pr_warn("%s: No suitable DMA available - falling back to PIO\n", + mmc_hostname(mmc)); + host->flags &= + ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA); + } + } + } + + /* SDMA does not support 64-bit DMA */ + if (host->flags & SDHCI_USE_64_BIT_DMA) + host->flags &= ~SDHCI_USE_SDMA; + + if (host->flags & SDHCI_USE_ADMA) { + /* + * The DMA descriptor table size is calculated as the maximum + * number of segments times 2, to allow for an alignment + * descriptor for each segment, plus 1 for a nop end descriptor, + * all multipled by the descriptor size. + */ + if (host->flags & SDHCI_USE_64_BIT_DMA) { + host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) * + SDHCI_ADMA2_64_DESC_SZ; + host->align_buffer_sz = SDHCI_MAX_SEGS * + SDHCI_ADMA2_64_ALIGN; + host->desc_sz = SDHCI_ADMA2_64_DESC_SZ; + host->align_sz = SDHCI_ADMA2_64_ALIGN; + host->align_mask = SDHCI_ADMA2_64_ALIGN - 1; + } else { + host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) * + SDHCI_ADMA2_32_DESC_SZ; + host->align_buffer_sz = SDHCI_MAX_SEGS * + SDHCI_ADMA2_32_ALIGN; + host->desc_sz = SDHCI_ADMA2_32_DESC_SZ; + host->align_sz = SDHCI_ADMA2_32_ALIGN; + host->align_mask = SDHCI_ADMA2_32_ALIGN - 1; + } + host->adma_table = dma_alloc_coherent(mmc_dev(mmc), + host->adma_table_sz, + &host->adma_addr, + GFP_KERNEL); + host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL); + if (!host->adma_table || !host->align_buffer) { + dma_free_coherent(mmc_dev(mmc), host->adma_table_sz, + host->adma_table, host->adma_addr); + kfree(host->align_buffer); + pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n", + mmc_hostname(mmc)); + host->flags &= ~SDHCI_USE_ADMA; + host->adma_table = NULL; + host->align_buffer = NULL; + } else if (host->adma_addr & host->align_mask) { + pr_warn("%s: unable to allocate aligned ADMA descriptor\n", + mmc_hostname(mmc)); + host->flags &= ~SDHCI_USE_ADMA; + dma_free_coherent(mmc_dev(mmc), host->adma_table_sz, + host->adma_table, host->adma_addr); + kfree(host->align_buffer); + host->adma_table = NULL; + host->align_buffer = NULL; + } + } + + /* + * If we use DMA, then it's up to the caller to set the DMA + * mask, but PIO does not need the hw shim so we set a new + * mask here in that case. + */ + if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) { + host->dma_mask = DMA_BIT_MASK(64); + mmc_dev(mmc)->dma_mask = &host->dma_mask; + } + + if (host->version >= SDHCI_SPEC_300) + host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK) + >> SDHCI_CLOCK_BASE_SHIFT; + else + host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK) + >> SDHCI_CLOCK_BASE_SHIFT; + + host->max_clk *= 1000000; + if (host->max_clk == 0 || host->quirks & + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) { + if (!host->ops->get_max_clock) { + pr_err("%s: Hardware doesn't specify base clock " + "frequency.\n", mmc_hostname(mmc)); + return -ENODEV; + } + host->max_clk = host->ops->get_max_clock(host); + } + + host->next_data.cookie = 1; + /* + * In case of Host Controller v3.00, find out whether clock + * multiplier is supported. + */ + host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >> + SDHCI_CLOCK_MUL_SHIFT; + + /* + * In case the value in Clock Multiplier is 0, then programmable + * clock mode is not supported, otherwise the actual clock + * multiplier is one more than the value of Clock Multiplier + * in the Capabilities Register. + */ + if (host->clk_mul) + host->clk_mul += 1; + + /* + * Set host parameters. + */ + mmc->ops = &sdhci_ops; + mmc->f_max = host->max_clk; + if (host->ops->get_min_clock) + mmc->f_min = host->ops->get_min_clock(host); + else if (host->version >= SDHCI_SPEC_300) { + if (host->clk_mul) { + mmc->f_min = (host->max_clk * host->clk_mul) / 1024; + mmc->f_max = host->max_clk * host->clk_mul; + } else + mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; + } else + mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; + + if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { + host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> + SDHCI_TIMEOUT_CLK_SHIFT; + if (host->timeout_clk == 0) { + if (host->ops->get_timeout_clock) { + host->timeout_clk = + host->ops->get_timeout_clock(host); + } else { + pr_err("%s: Hardware doesn't specify timeout clock frequency.\n", + mmc_hostname(mmc)); + return -ENODEV; + } + } + + if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT) + host->timeout_clk *= 1000; + + mmc->max_busy_timeout = host->ops->get_max_timeout_count ? + host->ops->get_max_timeout_count(host) : 1 << 27; + mmc->max_busy_timeout /= host->timeout_clk; + } + + if (override_timeout_clk) + host->timeout_clk = override_timeout_clk; + + mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23; + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; + + if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) + host->flags |= SDHCI_AUTO_CMD12; + + /* Auto-CMD23 stuff only works in ADMA or PIO. */ + if ((host->version >= SDHCI_SPEC_300) && + ((host->flags & SDHCI_USE_ADMA) || + !(host->flags & SDHCI_USE_SDMA)) && + !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) { + host->flags |= SDHCI_AUTO_CMD23; + DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); + } else { + DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc)); + } + + /* + * A controller may support 8-bit width, but the board itself + * might not have the pins brought out. Boards that support + * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in + * their platform code before calling sdhci_add_host(), and we + * won't assume 8-bit width for hosts without that CAP. + */ + if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23) + mmc->caps &= ~MMC_CAP_CMD23; + + if (caps[0] & SDHCI_CAN_DO_HISPD) + mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; + + if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) && + !(mmc->caps & MMC_CAP_NONREMOVABLE)) + mmc->caps |= MMC_CAP_NEEDS_POLL; + + /* If there are external regulators, get them */ + if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_enable(mmc->supply.vqmmc); + if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000, + 1950000)) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | + SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + if (ret) { + pr_warn("%s: Failed to enable vqmmc regulator: %d\n", + mmc_hostname(mmc), ret); + mmc->supply.vqmmc = ERR_PTR(-EINVAL); + } + } + + if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + + /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ + if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50)) + mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25; + + /* SDR104 supports also implies SDR50 support */ + if (caps[1] & SDHCI_SUPPORT_SDR104) { + mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50; + /* SD3.0: SDR104 is supported so (for eMMC) the caps2 + * field can be promoted to support HS200. + */ + if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) + mmc->caps2 |= MMC_CAP2_HS200; + } else if (caps[1] & SDHCI_SUPPORT_SDR50) + mmc->caps |= MMC_CAP_UHS_SDR50; + + if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 && + (caps[1] & SDHCI_SUPPORT_HS400)) + mmc->caps2 |= MMC_CAP2_HS400; + + if ((mmc->caps2 & MMC_CAP2_HSX00_1_2V) && + (IS_ERR(mmc->supply.vqmmc) || + !regulator_is_supported_voltage(mmc->supply.vqmmc, 1100000, + 1300000))) + mmc->caps2 &= ~MMC_CAP2_HSX00_1_2V; + + if ((caps[1] & SDHCI_SUPPORT_DDR50) && + !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50)) + mmc->caps |= MMC_CAP_UHS_DDR50; + + /* Does the host need tuning for SDR50? */ + if (caps[1] & SDHCI_USE_SDR50_TUNING) + host->flags |= SDHCI_SDR50_NEEDS_TUNING; + + /* Does the host need tuning for SDR104 / HS200? */ + if (mmc->caps2 & MMC_CAP2_HS200) + host->flags |= SDHCI_SDR104_NEEDS_TUNING; + + /* Driver Type(s) (A, C, D) supported by the host */ + if (caps[1] & SDHCI_DRIVER_TYPE_A) + mmc->caps |= MMC_CAP_DRIVER_TYPE_A; + if (caps[1] & SDHCI_DRIVER_TYPE_C) + mmc->caps |= MMC_CAP_DRIVER_TYPE_C; + if (caps[1] & SDHCI_DRIVER_TYPE_D) + mmc->caps |= MMC_CAP_DRIVER_TYPE_D; + + /* Initial value for re-tuning timer count */ + host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >> + SDHCI_RETUNING_TIMER_COUNT_SHIFT; + + /* + * In case Re-tuning Timer is not disabled, the actual value of + * re-tuning timer will be 2 ^ (n - 1). + */ + if (host->tuning_count) + host->tuning_count = 1 << (host->tuning_count - 1); + + /* Re-tuning mode supported by the Host Controller */ + host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >> + SDHCI_RETUNING_MODE_SHIFT; + + ocr_avail = 0; + + /* + * According to SD Host Controller spec v3.00, if the Host System + * can afford more than 150mA, Host Driver should set XPC to 1. Also + * the value is meaningful only if Voltage Support in the Capabilities + * register is set. The actual current value is 4 times the register + * value. + */ + max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT); + if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) { + int curr = regulator_get_current_limit(mmc->supply.vmmc); + if (curr > 0) { + + /* convert to SDHCI_MAX_CURRENT format */ + curr = curr/1000; /* convert to mA */ + curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER; + + curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT); + max_current_caps = + (curr << SDHCI_MAX_CURRENT_330_SHIFT) | + (curr << SDHCI_MAX_CURRENT_300_SHIFT) | + (curr << SDHCI_MAX_CURRENT_180_SHIFT); + } + } + + if (caps[0] & SDHCI_CAN_VDD_330) { + ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; + + mmc->max_current_330 = ((max_current_caps & + SDHCI_MAX_CURRENT_330_MASK) >> + SDHCI_MAX_CURRENT_330_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + } + if (caps[0] & SDHCI_CAN_VDD_300) { + ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; + + mmc->max_current_300 = ((max_current_caps & + SDHCI_MAX_CURRENT_300_MASK) >> + SDHCI_MAX_CURRENT_300_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + } + if (caps[0] & SDHCI_CAN_VDD_180) { + ocr_avail |= MMC_VDD_165_195; + + mmc->max_current_180 = ((max_current_caps & + SDHCI_MAX_CURRENT_180_MASK) >> + SDHCI_MAX_CURRENT_180_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + } + + /* If OCR set by host, use it instead. */ + if (host->ocr_mask) + ocr_avail = host->ocr_mask; + + /* If OCR set by external regulators, give it highest prio. */ + if (mmc->ocr_avail) + ocr_avail = mmc->ocr_avail; + + mmc->ocr_avail = ocr_avail; + mmc->ocr_avail_sdio = ocr_avail; + if (host->ocr_avail_sdio) + mmc->ocr_avail_sdio &= host->ocr_avail_sdio; + mmc->ocr_avail_sd = ocr_avail; + if (host->ocr_avail_sd) + mmc->ocr_avail_sd &= host->ocr_avail_sd; + else /* normal SD controllers don't support 1.8V */ + mmc->ocr_avail_sd &= ~MMC_VDD_165_195; + mmc->ocr_avail_mmc = ocr_avail; + if (host->ocr_avail_mmc) + mmc->ocr_avail_mmc &= host->ocr_avail_mmc; + + if (mmc->ocr_avail == 0) { + pr_err("%s: Hardware doesn't report any " + "support voltages.\n", mmc_hostname(mmc)); + return -ENODEV; + } + + spin_lock_init(&host->lock); + + /* + * Maximum number of segments. Depends on if the hardware + * can do scatter/gather or not. + */ + if (host->flags & SDHCI_USE_ADMA) + mmc->max_segs = SDHCI_MAX_SEGS; + else if (host->flags & SDHCI_USE_SDMA) + mmc->max_segs = 1; + else /* PIO */ + mmc->max_segs = SDHCI_MAX_SEGS; + + /* + * Maximum number of sectors in one transfer. Limited by SDMA boundary + * size (512KiB). Note some tuning modes impose a 4MiB limit, but this + * is less anyway. + */ + mmc->max_req_size = 524288; + + /* + * Maximum segment size. Could be one segment with the maximum number + * of bytes. When doing hardware scatter/gather, each entry cannot + * be larger than 64 KiB though. + */ + if (host->flags & SDHCI_USE_ADMA) { + if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC) + mmc->max_seg_size = 65535; + else + mmc->max_seg_size = 65536; + } else { + mmc->max_seg_size = mmc->max_req_size; + } + + /* + * Maximum block size. This varies from controller to controller and + * is specified in the capabilities register. + */ + if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) { + mmc->max_blk_size = 2; + } else { + mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >> + SDHCI_MAX_BLOCK_SHIFT; + if (mmc->max_blk_size >= 3) { + pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n", + mmc_hostname(mmc)); + mmc->max_blk_size = 0; + } + } + + mmc->max_blk_size = 512 << mmc->max_blk_size; + + /* + * Maximum block count. + */ + mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; + + /* + * Init tasklets. + */ + tasklet_init(&host->finish_tasklet, + sdhci_tasklet_finish, (unsigned long)host); + + setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host); + + init_waitqueue_head(&host->buf_ready_int); + + if (host->version >= SDHCI_SPEC_300) { + /* Initialize re-tuning timer */ + init_timer(&host->tuning_timer); + host->tuning_timer.data = (unsigned long)host; + host->tuning_timer.function = sdhci_tuning_timer; + } + + sdhci_init(host, 0); + + ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq, + IRQF_SHARED, mmc_hostname(mmc), host); + if (ret) { + pr_err("%s: Failed to request IRQ %d: %d\n", + mmc_hostname(mmc), host->irq, ret); + goto untasklet; + } + +#ifdef CONFIG_MMC_DEBUG + sdhci_dumpregs(host); +#endif + +#ifdef SDHCI_USE_LEDS_CLASS + snprintf(host->led_name, sizeof(host->led_name), + "%s::", mmc_hostname(mmc)); + host->led.name = host->led_name; + host->led.brightness = LED_OFF; + host->led.default_trigger = mmc_hostname(mmc); + host->led.brightness_set = sdhci_led_control; + + ret = led_classdev_register(mmc_dev(mmc), &host->led); + if (ret) { + pr_err("%s: Failed to register LED device: %d\n", + mmc_hostname(mmc), ret); + goto reset; + } +#endif + + mmiowb(); + + mmc_add_host(mmc); + + pr_info("%s: SDHCI controller on %s [%s] using %s\n", + mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), + (host->flags & SDHCI_USE_ADMA) ? + (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" : + (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO"); + + sdhci_enable_card_detection(host); + + return 0; + +#ifdef SDHCI_USE_LEDS_CLASS +reset: + sdhci_do_reset(host, SDHCI_RESET_ALL); + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); + free_irq(host->irq, host); +#endif +untasklet: + tasklet_kill(&host->finish_tasklet); + + return ret; +} + +EXPORT_SYMBOL_GPL(sdhci_add_host); + +void sdhci_remove_host(struct sdhci_host *host, int dead) +{ + struct mmc_host *mmc = host->mmc; + unsigned long flags; + + if (dead) { + spin_lock_irqsave(&host->lock, flags); + + host->flags |= SDHCI_DEVICE_DEAD; + + if (host->mrq) { + pr_err("%s: Controller removed during " + " transfer!\n", mmc_hostname(mmc)); + + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } + + spin_unlock_irqrestore(&host->lock, flags); + } + + sdhci_disable_card_detection(host); + + mmc_remove_host(mmc); + +#ifdef SDHCI_USE_LEDS_CLASS + led_classdev_unregister(&host->led); +#endif + + if (!dead) + sdhci_do_reset(host, SDHCI_RESET_ALL); + + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); + free_irq(host->irq, host); + + del_timer_sync(&host->timer); + + tasklet_kill(&host->finish_tasklet); + + if (!IS_ERR(mmc->supply.vqmmc)) + regulator_disable(mmc->supply.vqmmc); + + if (host->adma_table) + dma_free_coherent(mmc_dev(mmc), host->adma_table_sz, + host->adma_table, host->adma_addr); + kfree(host->align_buffer); + + host->adma_table = NULL; + host->align_buffer = NULL; +} + +EXPORT_SYMBOL_GPL(sdhci_remove_host); + +void sdhci_free_host(struct sdhci_host *host) +{ + mmc_free_host(host->mmc); +} + +EXPORT_SYMBOL_GPL(sdhci_free_host); + +/*****************************************************************************\ + * * + * Driver init/exit * + * * +\*****************************************************************************/ + +static int __init sdhci_drv_init(void) +{ + pr_info(DRIVER_NAME + ": Secure Digital Host Controller Interface driver\n"); + pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); + + return 0; +} + +static void __exit sdhci_drv_exit(void) +{ +} + +module_init(sdhci_drv_init); +module_exit(sdhci_drv_exit); + +module_param(debug_quirks, uint, 0444); +module_param(debug_quirks2, uint, 0444); + +MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); +MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver"); +MODULE_LICENSE("GPL"); + +MODULE_PARM_DESC(debug_quirks, "Force certain quirks."); +MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks."); |