diff options
Diffstat (limited to 'drivers/mtd/devices')
| -rw-r--r-- | drivers/mtd/devices/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 37 | ||||
| -rw-r--r-- | drivers/mtd/devices/powernv_flash.c | 2 |
3 files changed, 28 insertions, 29 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index f73c41697..58329d2da 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -113,12 +113,12 @@ config MTD_SST25L if you want to specify device partitioning. config MTD_BCM47XXSFLASH - tristate "R/O support for serial flash on BCMA bus" - depends on BCMA_SFLASH + tristate "Support for serial flash on BCMA bus" + depends on BCMA_SFLASH && (MIPS || ARM) help BCMA bus can have various flash memories attached, they are registered by bcma as platform devices. This enables driver for - serial flash memories (only read-only mode is implemented). + serial flash memories. config MTD_SLRAM tristate "Uncached system RAM" @@ -171,18 +171,6 @@ config MTDRAM_ERASE_SIZE as a module, it is also possible to specify this as a parameter when loading the module. -#If not a module (I don't want to test it as a module) -config MTDRAM_ABS_POS - hex "SRAM Hexadecimal Absolute position or 0" - depends on MTD_MTDRAM=y - default "0" - help - If you have system RAM accessible by the CPU but not used by Linux - in normal operation, you can give the physical address at which the - available RAM starts, and the MTDRAM driver will use it instead of - allocating space from Linux's available memory. Otherwise, leave - this set to zero. Most people will want to leave this as zero. - config MTD_BLOCK2MTD tristate "MTD using block device" depends on BLOCK diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 9d6854467..9cf7fcd28 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -73,14 +73,15 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) return spi_write(spi, flash->command, len + 1); } -static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len, - size_t *retlen, const u_char *buf) +static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, + const u_char *buf) { struct m25p *flash = nor->priv; struct spi_device *spi = flash->spi; struct spi_transfer t[2] = {}; struct spi_message m; int cmd_sz = m25p_cmdsz(nor); + ssize_t ret; spi_message_init(&m); @@ -98,9 +99,14 @@ static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len, t[1].len = len; spi_message_add_tail(&t[1], &m); - spi_sync(spi, &m); + ret = spi_sync(spi, &m); + if (ret) + return ret; - *retlen += m.actual_length - cmd_sz; + ret = m.actual_length - cmd_sz; + if (ret < 0) + return -EIO; + return ret; } static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) @@ -119,21 +125,21 @@ static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) * Read an address range from the nor chip. The address range * may be any size provided it is within the physical boundaries. */ -static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, - size_t *retlen, u_char *buf) +static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, + u_char *buf) { struct m25p *flash = nor->priv; struct spi_device *spi = flash->spi; struct spi_transfer t[2]; struct spi_message m; unsigned int dummy = nor->read_dummy; + ssize_t ret; /* convert the dummy cycles to the number of bytes */ dummy /= 8; if (spi_flash_read_supported(spi)) { struct spi_flash_read_message msg; - int ret; memset(&msg, 0, sizeof(msg)); @@ -149,8 +155,9 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, msg.data_nbits = m25p80_rx_nbits(nor); ret = spi_flash_read(spi, &msg); - *retlen = msg.retlen; - return ret; + if (ret < 0) + return ret; + return msg.retlen; } spi_message_init(&m); @@ -165,13 +172,17 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, t[1].rx_buf = buf; t[1].rx_nbits = m25p80_rx_nbits(nor); - t[1].len = len; + t[1].len = min(len, spi_max_transfer_size(spi)); spi_message_add_tail(&t[1], &m); - spi_sync(spi, &m); + ret = spi_sync(spi, &m); + if (ret) + return ret; - *retlen = m.actual_length - m25p_cmdsz(nor) - dummy; - return 0; + ret = m.actual_length - m25p_cmdsz(nor) - dummy; + if (ret < 0) + return -EIO; + return ret; } /* diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c index d5b870b3f..f5396f26d 100644 --- a/drivers/mtd/devices/powernv_flash.c +++ b/drivers/mtd/devices/powernv_flash.c @@ -95,7 +95,7 @@ static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op, return -EIO; } - rc = be64_to_cpu(msg.params[1]); + rc = opal_get_async_rc(msg); if (rc == OPAL_SUCCESS) { rc = 0; if (retlen) |