diff options
Diffstat (limited to 'drivers/mtd/nand/au1550nd.c')
| -rw-r--r-- | drivers/mtd/nand/au1550nd.c | 515 |
1 files changed, 515 insertions, 0 deletions
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c new file mode 100644 index 000000000..c0c3be180 --- /dev/null +++ b/drivers/mtd/nand/au1550nd.c @@ -0,0 +1,515 @@ +/* + * drivers/mtd/nand/au1550nd.c + * + * Copyright (C) 2004 Embedded Edge, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <asm/io.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1550nd.h> + + +struct au1550nd_ctx { + struct mtd_info info; + struct nand_chip chip; + + int cs; + void __iomem *base; + void (*write_byte)(struct mtd_info *, u_char); +}; + +/** + * au_read_byte - read one byte from the chip + * @mtd: MTD device structure + * + * read function for 8bit buswidth + */ +static u_char au_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + u_char ret = readb(this->IO_ADDR_R); + wmb(); /* drain writebuffer */ + return ret; +} + +/** + * au_write_byte - write one byte to the chip + * @mtd: MTD device structure + * @byte: pointer to data byte to write + * + * write function for 8it buswidth + */ +static void au_write_byte(struct mtd_info *mtd, u_char byte) +{ + struct nand_chip *this = mtd->priv; + writeb(byte, this->IO_ADDR_W); + wmb(); /* drain writebuffer */ +} + +/** + * au_read_byte16 - read one byte endianness aware from the chip + * @mtd: MTD device structure + * + * read function for 16bit buswidth with endianness conversion + */ +static u_char au_read_byte16(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + u_char ret = (u_char) cpu_to_le16(readw(this->IO_ADDR_R)); + wmb(); /* drain writebuffer */ + return ret; +} + +/** + * au_write_byte16 - write one byte endianness aware to the chip + * @mtd: MTD device structure + * @byte: pointer to data byte to write + * + * write function for 16bit buswidth with endianness conversion + */ +static void au_write_byte16(struct mtd_info *mtd, u_char byte) +{ + struct nand_chip *this = mtd->priv; + writew(le16_to_cpu((u16) byte), this->IO_ADDR_W); + wmb(); /* drain writebuffer */ +} + +/** + * au_read_word - read one word from the chip + * @mtd: MTD device structure + * + * read function for 16bit buswidth without endianness conversion + */ +static u16 au_read_word(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + u16 ret = readw(this->IO_ADDR_R); + wmb(); /* drain writebuffer */ + return ret; +} + +/** + * au_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + * + * write function for 8bit buswidth + */ +static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) { + writeb(buf[i], this->IO_ADDR_W); + wmb(); /* drain writebuffer */ + } +} + +/** + * au_read_buf - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + * + * read function for 8bit buswidth + */ +static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) { + buf[i] = readb(this->IO_ADDR_R); + wmb(); /* drain writebuffer */ + } +} + +/** + * au_write_buf16 - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + * + * write function for 16bit buswidth + */ +static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + u16 *p = (u16 *) buf; + len >>= 1; + + for (i = 0; i < len; i++) { + writew(p[i], this->IO_ADDR_W); + wmb(); /* drain writebuffer */ + } + +} + +/** + * au_read_buf16 - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + * + * read function for 16bit buswidth + */ +static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + u16 *p = (u16 *) buf; + len >>= 1; + + for (i = 0; i < len; i++) { + p[i] = readw(this->IO_ADDR_R); + wmb(); /* drain writebuffer */ + } +} + +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 + +static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info); + struct nand_chip *this = mtd->priv; + + switch (cmd) { + + case NAND_CTL_SETCLE: + this->IO_ADDR_W = ctx->base + MEM_STNAND_CMD; + break; + + case NAND_CTL_CLRCLE: + this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA; + break; + + case NAND_CTL_SETALE: + this->IO_ADDR_W = ctx->base + MEM_STNAND_ADDR; + break; + + case NAND_CTL_CLRALE: + this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA; + /* FIXME: Nobody knows why this is necessary, + * but it works only that way */ + udelay(1); + break; + + case NAND_CTL_SETNCE: + /* assert (force assert) chip enable */ + alchemy_wrsmem((1 << (4 + ctx->cs)), AU1000_MEM_STNDCTL); + break; + + case NAND_CTL_CLRNCE: + /* deassert chip enable */ + alchemy_wrsmem(0, AU1000_MEM_STNDCTL); + break; + } + + this->IO_ADDR_R = this->IO_ADDR_W; + + wmb(); /* Drain the writebuffer */ +} + +int au1550_device_ready(struct mtd_info *mtd) +{ + return (alchemy_rdsmem(AU1000_MEM_STSTAT) & 0x1) ? 1 : 0; +} + +/** + * au1550_select_chip - control -CE line + * Forbid driving -CE manually permitting the NAND controller to do this. + * Keeping -CE asserted during the whole sector reads interferes with the + * NOR flash and PCMCIA drivers as it causes contention on the static bus. + * We only have to hold -CE low for the NAND read commands since the flash + * chip needs it to be asserted during chip not ready time but the NAND + * controller keeps it released. + * + * @mtd: MTD device structure + * @chip: chipnumber to select, -1 for deselect + */ +static void au1550_select_chip(struct mtd_info *mtd, int chip) +{ +} + +/** + * au1550_command - Send command to NAND device + * @mtd: MTD device structure + * @command: the command to be sent + * @column: the column address for this command, -1 if none + * @page_addr: the page address for this command, -1 if none + */ +static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) +{ + struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info); + struct nand_chip *this = mtd->priv; + int ce_override = 0, i; + unsigned long flags = 0; + + /* Begin command latch cycle */ + au1550_hwcontrol(mtd, NAND_CTL_SETCLE); + /* + * Write out the command to the device. + */ + if (command == NAND_CMD_SEQIN) { + int readcmd; + + if (column >= mtd->writesize) { + /* OOB area */ + column -= mtd->writesize; + readcmd = NAND_CMD_READOOB; + } else if (column < 256) { + /* First 256 bytes --> READ0 */ + readcmd = NAND_CMD_READ0; + } else { + column -= 256; + readcmd = NAND_CMD_READ1; + } + ctx->write_byte(mtd, readcmd); + } + ctx->write_byte(mtd, command); + + /* Set ALE and clear CLE to start address cycle */ + au1550_hwcontrol(mtd, NAND_CTL_CLRCLE); + + if (column != -1 || page_addr != -1) { + au1550_hwcontrol(mtd, NAND_CTL_SETALE); + + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (this->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) + column >>= 1; + ctx->write_byte(mtd, column); + } + if (page_addr != -1) { + ctx->write_byte(mtd, (u8)(page_addr & 0xff)); + + if (command == NAND_CMD_READ0 || + command == NAND_CMD_READ1 || + command == NAND_CMD_READOOB) { + /* + * NAND controller will release -CE after + * the last address byte is written, so we'll + * have to forcibly assert it. No interrupts + * are allowed while we do this as we don't + * want the NOR flash or PCMCIA drivers to + * steal our precious bytes of data... + */ + ce_override = 1; + local_irq_save(flags); + au1550_hwcontrol(mtd, NAND_CTL_SETNCE); + } + + ctx->write_byte(mtd, (u8)(page_addr >> 8)); + + /* One more address cycle for devices > 32MiB */ + if (this->chipsize > (32 << 20)) + ctx->write_byte(mtd, + ((page_addr >> 16) & 0x0f)); + } + /* Latch in address */ + au1550_hwcontrol(mtd, NAND_CTL_CLRALE); + } + + /* + * Program and erase have their own busy handlers. + * Status and sequential in need no delay. + */ + switch (command) { + + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_STATUS: + return; + + case NAND_CMD_RESET: + break; + + case NAND_CMD_READ0: + case NAND_CMD_READ1: + case NAND_CMD_READOOB: + /* Check if we're really driving -CE low (just in case) */ + if (unlikely(!ce_override)) + break; + + /* Apply a short delay always to ensure that we do wait tWB. */ + ndelay(100); + /* Wait for a chip to become ready... */ + for (i = this->chip_delay; !this->dev_ready(mtd) && i > 0; --i) + udelay(1); + + /* Release -CE and re-enable interrupts. */ + au1550_hwcontrol(mtd, NAND_CTL_CLRNCE); + local_irq_restore(flags); + return; + } + /* Apply this short delay always to ensure that we do wait tWB. */ + ndelay(100); + + while(!this->dev_ready(mtd)); +} + +static int find_nand_cs(unsigned long nand_base) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); + unsigned long addr, staddr, start, mask, end; + int i; + + for (i = 0; i < 4; i++) { + addr = 0x1000 + (i * 0x10); /* CSx */ + staddr = __raw_readl(base + addr + 0x08); /* STADDRx */ + /* figure out the decoded range of this CS */ + start = (staddr << 4) & 0xfffc0000; + mask = (staddr << 18) & 0xfffc0000; + end = (start | (start - 1)) & ~(start ^ mask); + if ((nand_base >= start) && (nand_base < end)) + return i; + } + + return -ENODEV; +} + +static int au1550nd_probe(struct platform_device *pdev) +{ + struct au1550nd_platdata *pd; + struct au1550nd_ctx *ctx; + struct nand_chip *this; + struct resource *r; + int ret, cs; + + pd = dev_get_platdata(&pdev->dev); + if (!pd) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no NAND memory resource\n"); + ret = -ENODEV; + goto out1; + } + if (request_mem_region(r->start, resource_size(r), "au1550-nand")) { + dev_err(&pdev->dev, "cannot claim NAND memory area\n"); + ret = -ENOMEM; + goto out1; + } + + ctx->base = ioremap_nocache(r->start, 0x1000); + if (!ctx->base) { + dev_err(&pdev->dev, "cannot remap NAND memory area\n"); + ret = -ENODEV; + goto out2; + } + + this = &ctx->chip; + ctx->info.priv = this; + ctx->info.owner = THIS_MODULE; + + /* figure out which CS# r->start belongs to */ + cs = find_nand_cs(r->start); + if (cs < 0) { + dev_err(&pdev->dev, "cannot detect NAND chipselect\n"); + ret = -ENODEV; + goto out3; + } + ctx->cs = cs; + + this->dev_ready = au1550_device_ready; + this->select_chip = au1550_select_chip; + this->cmdfunc = au1550_command; + + /* 30 us command delay time */ + this->chip_delay = 30; + this->ecc.mode = NAND_ECC_SOFT; + + if (pd->devwidth) + this->options |= NAND_BUSWIDTH_16; + + this->read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte; + ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte; + this->read_word = au_read_word; + this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf; + this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf; + + ret = nand_scan(&ctx->info, 1); + if (ret) { + dev_err(&pdev->dev, "NAND scan failed with %d\n", ret); + goto out3; + } + + mtd_device_register(&ctx->info, pd->parts, pd->num_parts); + + platform_set_drvdata(pdev, ctx); + + return 0; + +out3: + iounmap(ctx->base); +out2: + release_mem_region(r->start, resource_size(r)); +out1: + kfree(ctx); + return ret; +} + +static int au1550nd_remove(struct platform_device *pdev) +{ + struct au1550nd_ctx *ctx = platform_get_drvdata(pdev); + struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + nand_release(&ctx->info); + iounmap(ctx->base); + release_mem_region(r->start, 0x1000); + kfree(ctx); + return 0; +} + +static struct platform_driver au1550nd_driver = { + .driver = { + .name = "au1550-nand", + }, + .probe = au1550nd_probe, + .remove = au1550nd_remove, +}; + +module_platform_driver(au1550nd_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Embedded Edge, LLC"); +MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board"); |