summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/jz4780_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/jz4780_nand.c')
-rw-r--r--drivers/mtd/nand/jz4780_nand.c21
1 files changed, 5 insertions, 16 deletions
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
index e1c016c9d..daf3c4217 100644
--- a/drivers/mtd/nand/jz4780_nand.c
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -17,7 +17,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/gpio/consumer.h>
-#include <linux/of_mtd.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
@@ -56,8 +55,6 @@ struct jz4780_nand_chip {
struct nand_chip chip;
struct list_head chip_list;
- struct nand_ecclayout ecclayout;
-
struct gpio_desc *busy_gpio;
struct gpio_desc *wp_gpio;
unsigned int reading: 1;
@@ -165,8 +162,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
- struct nand_ecclayout *layout = &nand->ecclayout;
- u32 start, i;
+ int eccbytes;
chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
(chip->ecc.strength / 8);
@@ -183,7 +179,6 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
chip->ecc.correct = jz4780_nand_ecc_correct;
/* fall through */
case NAND_ECC_SOFT:
- case NAND_ECC_SOFT_BCH:
dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->bch) ? "hardware BCH" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
@@ -201,23 +196,17 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
- layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+ eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
- if (layout->eccbytes > mtd->oobsize - 2) {
+ if (eccbytes > mtd->oobsize - 2) {
dev_err(dev,
"invalid ECC config: required %d ECC bytes, but only %d are available",
- layout->eccbytes, mtd->oobsize - 2);
+ eccbytes, mtd->oobsize - 2);
return -EINVAL;
}
- start = mtd->oobsize - layout->eccbytes;
- for (i = 0; i < layout->eccbytes; i++)
- layout->eccpos[i] = start + i;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
+ mtd->ooblayout = &nand_ooblayout_lp_ops;
- chip->ecc.layout = layout;
return 0;
}