summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/mxc_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/mxc_nand.c')
-rw-r--r--drivers/mtd/nand/mxc_nand.c1649
1 files changed, 1649 insertions, 0 deletions
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
new file mode 100644
index 000000000..372e0e38f
--- /dev/null
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -0,0 +1,1649 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+
+#include <asm/mach/flash.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
+
+#define DRIVER_NAME "mxc_nand"
+
+/* Addresses for NFC registers */
+#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
+#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
+#define NFC_V1_V2_FLASH_ADDR (host->regs + 0x06)
+#define NFC_V1_V2_FLASH_CMD (host->regs + 0x08)
+#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
+#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
+#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
+#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
+#define NFC_V1_V2_WRPROT (host->regs + 0x12)
+#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
+#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
+#define NFC_V21_UNLOCKSTART_BLKADDR0 (host->regs + 0x20)
+#define NFC_V21_UNLOCKSTART_BLKADDR1 (host->regs + 0x24)
+#define NFC_V21_UNLOCKSTART_BLKADDR2 (host->regs + 0x28)
+#define NFC_V21_UNLOCKSTART_BLKADDR3 (host->regs + 0x2c)
+#define NFC_V21_UNLOCKEND_BLKADDR0 (host->regs + 0x22)
+#define NFC_V21_UNLOCKEND_BLKADDR1 (host->regs + 0x26)
+#define NFC_V21_UNLOCKEND_BLKADDR2 (host->regs + 0x2a)
+#define NFC_V21_UNLOCKEND_BLKADDR3 (host->regs + 0x2e)
+#define NFC_V1_V2_NF_WRPRST (host->regs + 0x18)
+#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a)
+#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c)
+
+#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
+#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2)
+#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
+#define NFC_V1_V2_CONFIG1_RST (1 << 6)
+#define NFC_V1_V2_CONFIG1_CE (1 << 7)
+#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
+#define NFC_V2_CONFIG1_PPB(x) (((x) & 0x3) << 9)
+#define NFC_V2_CONFIG1_FP_INT (1 << 11)
+
+#define NFC_V1_V2_CONFIG2_INT (1 << 15)
+
+/*
+ * Operation modes for the NFC. Valid for v1, v2 and v3
+ * type controllers.
+ */
+#define NFC_CMD (1 << 0)
+#define NFC_ADDR (1 << 1)
+#define NFC_INPUT (1 << 2)
+#define NFC_OUTPUT (1 << 3)
+#define NFC_ID (1 << 4)
+#define NFC_STATUS (1 << 5)
+
+#define NFC_V3_FLASH_CMD (host->regs_axi + 0x00)
+#define NFC_V3_FLASH_ADDR0 (host->regs_axi + 0x04)
+
+#define NFC_V3_CONFIG1 (host->regs_axi + 0x34)
+#define NFC_V3_CONFIG1_SP_EN (1 << 0)
+#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7 ) << 4)
+
+#define NFC_V3_ECC_STATUS_RESULT (host->regs_axi + 0x38)
+
+#define NFC_V3_LAUNCH (host->regs_axi + 0x40)
+
+#define NFC_V3_WRPROT (host->regs_ip + 0x0)
+#define NFC_V3_WRPROT_LOCK_TIGHT (1 << 0)
+#define NFC_V3_WRPROT_LOCK (1 << 1)
+#define NFC_V3_WRPROT_UNLOCK (1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
+
+#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0 (host->regs_ip + 0x04)
+
+#define NFC_V3_CONFIG2 (host->regs_ip + 0x24)
+#define NFC_V3_CONFIG2_PS_512 (0 << 0)
+#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
+#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
+#define NFC_V3_CONFIG2_PPB(x, shift) (((x) & 0x3) << shift)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
+#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
+#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
+
+#define NFC_V3_CONFIG3 (host->regs_ip + 0x28)
+#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8 (1 << 3)
+#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x) (((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
+
+#define NFC_V3_IPC (host->regs_ip + 0x2C)
+#define NFC_V3_IPC_CREQ (1 << 0)
+#define NFC_V3_IPC_INT (1 << 31)
+
+#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34)
+
+struct mxc_nand_host;
+
+struct mxc_nand_devtype_data {
+ void (*preset)(struct mtd_info *);
+ void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_page)(struct mtd_info *, unsigned int);
+ void (*send_read_id)(struct mxc_nand_host *);
+ uint16_t (*get_dev_status)(struct mxc_nand_host *);
+ int (*check_int)(struct mxc_nand_host *);
+ void (*irq_control)(struct mxc_nand_host *, int);
+ u32 (*get_ecc_status)(struct mxc_nand_host *);
+ struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ int (*correct_data)(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc);
+
+ /*
+ * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
+ * (CONFIG1:INT_MSK is set). To handle this the driver uses
+ * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK
+ */
+ int irqpending_quirk;
+ int needs_ip;
+
+ size_t regs_offset;
+ size_t spare0_offset;
+ size_t axi_offset;
+
+ int spare_len;
+ int eccbytes;
+ int eccsize;
+ int ppb_shift;
+};
+
+struct mxc_nand_host {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ struct device *dev;
+
+ void __iomem *spare0;
+ void __iomem *main_area0;
+
+ void __iomem *base;
+ void __iomem *regs;
+ void __iomem *regs_axi;
+ void __iomem *regs_ip;
+ int status_request;
+ struct clk *clk;
+ int clk_act;
+ int irq;
+ int eccsize;
+ int active_cs;
+
+ struct completion op_completion;
+
+ uint8_t *data_buf;
+ unsigned int buf_start;
+
+ const struct mxc_nand_devtype_data *devtype_data;
+ struct mxc_nand_platform_data pdata;
+};
+
+/* OOB placement block for use with hardware ecc generation */
+static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
+ .eccbytes = 5,
+ .eccpos = {6, 7, 8, 9, 10},
+ .oobfree = {{0, 5}, {12, 4}, }
+};
+
+static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
+ .eccbytes = 20,
+ .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
+ 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
+ .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
+};
+
+/* OOB description for 512 byte pages with 16 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
+ .eccbytes = 1 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15
+ },
+ .oobfree = {
+ {.offset = 0, .length = 5}
+ }
+};
+
+/* OOB description for 2048 byte pages with 64 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
+ .eccbytes = 4 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 55, 56, 57, 58, 59, 60, 61, 62, 63
+ },
+ .oobfree = {
+ {.offset = 2, .length = 4},
+ {.offset = 16, .length = 7},
+ {.offset = 32, .length = 7},
+ {.offset = 48, .length = 7}
+ }
+};
+
+/* OOB description for 4096 byte pages with 128 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_4k = {
+ .eccbytes = 8 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ 71, 72, 73, 74, 75, 76, 77, 78, 79,
+ 87, 88, 89, 90, 91, 92, 93, 94, 95,
+ 103, 104, 105, 106, 107, 108, 109, 110, 111,
+ 119, 120, 121, 122, 123, 124, 125, 126, 127,
+ },
+ .oobfree = {
+ {.offset = 2, .length = 4},
+ {.offset = 16, .length = 7},
+ {.offset = 32, .length = 7},
+ {.offset = 48, .length = 7},
+ {.offset = 64, .length = 7},
+ {.offset = 80, .length = 7},
+ {.offset = 96, .length = 7},
+ {.offset = 112, .length = 7},
+ }
+};
+
+static const char * const part_probes[] = {
+ "cmdlinepart", "RedBoot", "ofpart", NULL };
+
+static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
+{
+ int i;
+ u32 *t = trg;
+ const __iomem u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ *t++ = __raw_readl(s++);
+}
+
+static inline void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+ /* __iowrite32_copy use 32bit size values so divide by 4 */
+ __iowrite32_copy(trg, src, size / 4);
+}
+
+static int check_int_v3(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_IPC);
+ if (!(tmp & NFC_V3_IPC_INT))
+ return 0;
+
+ tmp &= ~NFC_V3_IPC_INT;
+ writel(tmp, NFC_V3_IPC);
+
+ return 1;
+}
+
+static int check_int_v1_v2(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readw(NFC_V1_V2_CONFIG2);
+ if (!(tmp & NFC_V1_V2_CONFIG2_INT))
+ return 0;
+
+ if (!host->devtype_data->irqpending_quirk)
+ writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
+
+ return 1;
+}
+
+static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
+{
+ uint16_t tmp;
+
+ tmp = readw(NFC_V1_V2_CONFIG1);
+
+ if (activate)
+ tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+ else
+ tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ writew(tmp, NFC_V1_V2_CONFIG1);
+}
+
+static void irq_control_v3(struct mxc_nand_host *host, int activate)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG2);
+
+ if (activate)
+ tmp &= ~NFC_V3_CONFIG2_INT_MSK;
+ else
+ tmp |= NFC_V3_CONFIG2_INT_MSK;
+
+ writel(tmp, NFC_V3_CONFIG2);
+}
+
+static void irq_control(struct mxc_nand_host *host, int activate)
+{
+ if (host->devtype_data->irqpending_quirk) {
+ if (activate)
+ enable_irq(host->irq);
+ else
+ disable_irq_nosync(host->irq);
+ } else {
+ host->devtype_data->irq_control(host, activate);
+ }
+}
+
+static u32 get_ecc_status_v1(struct mxc_nand_host *host)
+{
+ return readw(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v2(struct mxc_nand_host *host)
+{
+ return readl(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v3(struct mxc_nand_host *host)
+{
+ return readl(NFC_V3_ECC_STATUS_RESULT);
+}
+
+static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
+{
+ struct mxc_nand_host *host = dev_id;
+
+ if (!host->devtype_data->check_int(host))
+ return IRQ_NONE;
+
+ irq_control(host, 0);
+
+ complete(&host->op_completion);
+
+ return IRQ_HANDLED;
+}
+
+/* This function polls the NANDFC to wait for the basic operation to
+ * complete by checking the INT bit of config2 register.
+ */
+static int wait_op_done(struct mxc_nand_host *host, int useirq)
+{
+ int ret = 0;
+
+ /*
+ * If operation is already complete, don't bother to setup an irq or a
+ * loop.
+ */
+ if (host->devtype_data->check_int(host))
+ return 0;
+
+ if (useirq) {
+ unsigned long timeout;
+
+ reinit_completion(&host->op_completion);
+
+ irq_control(host, 1);
+
+ timeout = wait_for_completion_timeout(&host->op_completion, HZ);
+ if (!timeout && !host->devtype_data->check_int(host)) {
+ dev_dbg(host->dev, "timeout waiting for irq\n");
+ ret = -ETIMEDOUT;
+ }
+ } else {
+ int max_retries = 8000;
+ int done;
+
+ do {
+ udelay(1);
+
+ done = host->devtype_data->check_int(host);
+ if (done)
+ break;
+
+ } while (--max_retries);
+
+ if (!done) {
+ dev_dbg(host->dev, "timeout polling for completion\n");
+ ret = -ETIMEDOUT;
+ }
+ }
+
+ WARN_ONCE(ret < 0, "timeout! useirq=%d\n", useirq);
+
+ return ret;
+}
+
+static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+ /* fill command */
+ writel(cmd, NFC_V3_FLASH_CMD);
+
+ /* send out command */
+ writel(NFC_CMD, NFC_V3_LAUNCH);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+}
+
+/* This function issues the specified command to the NAND device and
+ * waits for completion. */
+static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+ pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+
+ writew(cmd, NFC_V1_V2_FLASH_CMD);
+ writew(NFC_CMD, NFC_V1_V2_CONFIG2);
+
+ if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) {
+ int max_retries = 100;
+ /* Reset completion is indicated by NFC_CONFIG2 */
+ /* being set to 0 */
+ while (max_retries-- > 0) {
+ if (readw(NFC_V1_V2_CONFIG2) == 0) {
+ break;
+ }
+ udelay(1);
+ }
+ if (max_retries < 0)
+ pr_debug("%s: RESET failed\n", __func__);
+ } else {
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+ }
+}
+
+static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+ /* fill address */
+ writel(addr, NFC_V3_FLASH_ADDR0);
+
+ /* send out address */
+ writel(NFC_ADDR, NFC_V3_LAUNCH);
+
+ wait_op_done(host, 0);
+}
+
+/* This function sends an address (or partial address) to the
+ * NAND device. The address is used to select the source/destination for
+ * a NAND command. */
+static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+ pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
+
+ writew(addr, NFC_V1_V2_FLASH_ADDR);
+ writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, islast);
+}
+
+static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG1);
+ tmp &= ~(7 << 4);
+ writel(tmp, NFC_V3_CONFIG1);
+
+ /* transfer data from NFC ram to nand */
+ writel(ops, NFC_V3_LAUNCH);
+
+ wait_op_done(host, false);
+}
+
+static void send_page_v2(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /* NANDFC buffer 0 is used for page read/write */
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+ writew(ops, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
+}
+
+static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ int bufs, i;
+
+ if (mtd->writesize > 512)
+ bufs = 4;
+ else
+ bufs = 1;
+
+ for (i = 0; i < bufs; i++) {
+
+ /* NANDFC buffer 0 is used for page read/write */
+ writew((host->active_cs << 4) | i, NFC_V1_V2_BUF_ADDR);
+
+ writew(ops, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
+ }
+}
+
+static void send_read_id_v3(struct mxc_nand_host *host)
+{
+ /* Read ID into main buffer */
+ writel(NFC_ID, NFC_V3_LAUNCH);
+
+ wait_op_done(host, true);
+
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
+}
+
+/* Request the NANDFC to perform a read of the NAND device ID. */
+static void send_read_id_v1_v2(struct mxc_nand_host *host)
+{
+ /* NANDFC buffer 0 is used for device ID output */
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+ writew(NFC_ID, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
+
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
+}
+
+static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
+{
+ writew(NFC_STATUS, NFC_V3_LAUNCH);
+ wait_op_done(host, true);
+
+ return readl(NFC_V3_CONFIG1) >> 16;
+}
+
+/* This function requests the NANDFC to perform a read of the
+ * NAND device status and returns the current status. */
+static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
+{
+ void __iomem *main_buf = host->main_area0;
+ uint32_t store;
+ uint16_t ret;
+
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+ /*
+ * The device status is stored in main_area0. To
+ * prevent corruption of the buffer save the value
+ * and restore it afterwards.
+ */
+ store = readl(main_buf);
+
+ writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
+ wait_op_done(host, true);
+
+ ret = readw(main_buf);
+
+ writel(store, main_buf);
+
+ return ret;
+}
+
+/* This functions is used by upper layer to checks if device is ready */
+static int mxc_nand_dev_ready(struct mtd_info *mtd)
+{
+ /*
+ * NFC handles R/B internally. Therefore, this function
+ * always returns status as ready.
+ */
+ return 1;
+}
+
+static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ /*
+ * If HW ECC is enabled, we turn it on during init. There is
+ * no need to enable again here.
+ */
+}
+
+static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /*
+ * 1-Bit errors are automatically corrected in HW. No need for
+ * additional correction. 2-Bit errors cannot be corrected by
+ * HW ECC, so we need to return failure
+ */
+ uint16_t ecc_status = get_ecc_status_v1(host);
+
+ if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
+ pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u32 ecc_stat, err;
+ int no_subpages = 1;
+ int ret = 0;
+ u8 ecc_bit_mask, err_limit;
+
+ ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
+ err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
+
+ no_subpages = mtd->writesize >> 9;
+
+ ecc_stat = host->devtype_data->get_ecc_status(host);
+
+ do {
+ err = ecc_stat & ecc_bit_mask;
+ if (err > err_limit) {
+ printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+ return -1;
+ } else {
+ ret += err;
+ }
+ ecc_stat >>= 4;
+ } while (--no_subpages);
+
+ pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+
+ return ret;
+}
+
+static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ return 0;
+}
+
+static u_char mxc_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint8_t ret;
+
+ /* Check for status request */
+ if (host->status_request)
+ return host->devtype_data->get_dev_status(host) & 0xFF;
+
+ if (nand_chip->options & NAND_BUSWIDTH_16) {
+ /* only take the lower byte of each word */
+ ret = *(uint16_t *)(host->data_buf + host->buf_start);
+
+ host->buf_start += 2;
+ } else {
+ ret = *(uint8_t *)(host->data_buf + host->buf_start);
+ host->buf_start++;
+ }
+
+ pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
+ return ret;
+}
+
+static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t ret;
+
+ ret = *(uint16_t *)(host->data_buf + host->buf_start);
+ host->buf_start += 2;
+
+ return ret;
+}
+
+/* Write data of length len to buffer buf. The data to be
+ * written on NAND Flash is first copied to RAMbuffer. After the Data Input
+ * Operation by the NFC, the data is written to NAND Flash */
+static void mxc_nand_write_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u16 col = host->buf_start;
+ int n = mtd->oobsize + mtd->writesize - col;
+
+ n = min(n, len);
+
+ memcpy(host->data_buf + col, buf, n);
+
+ host->buf_start += n;
+}
+
+/* Read the data buffer from the NAND Flash. To read the data from NAND
+ * Flash first the data output cycle is initiated by the NFC, which copies
+ * the data to RAMbuffer. This data of length len is then copied to buffer buf.
+ */
+static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u16 col = host->buf_start;
+ int n = mtd->oobsize + mtd->writesize - col;
+
+ n = min(n, len);
+
+ memcpy(buf, host->data_buf + col, n);
+
+ host->buf_start += n;
+}
+
+/* This function is used by upper layer for select and
+ * deselect of the NAND chip */
+static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ if (chip == -1) {
+ /* Disable the NFC clock */
+ if (host->clk_act) {
+ clk_disable_unprepare(host->clk);
+ host->clk_act = 0;
+ }
+ return;
+ }
+
+ if (!host->clk_act) {
+ /* Enable the NFC clock */
+ clk_prepare_enable(host->clk);
+ host->clk_act = 1;
+ }
+}
+
+static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ if (chip == -1) {
+ /* Disable the NFC clock */
+ if (host->clk_act) {
+ clk_disable_unprepare(host->clk);
+ host->clk_act = 0;
+ }
+ return;
+ }
+
+ if (!host->clk_act) {
+ /* Enable the NFC clock */
+ clk_prepare_enable(host->clk);
+ host->clk_act = 1;
+ }
+
+ host->active_cs = chip;
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+}
+
+/*
+ * Function to transfer data to/from spare area.
+ */
+static void copy_spare(struct mtd_info *mtd, bool bfrom)
+{
+ struct nand_chip *this = mtd->priv;
+ struct mxc_nand_host *host = this->priv;
+ u16 i, j;
+ u16 n = mtd->writesize >> 9;
+ u8 *d = host->data_buf + mtd->writesize;
+ u8 __iomem *s = host->spare0;
+ u16 t = host->devtype_data->spare_len;
+
+ j = (mtd->oobsize / n >> 1) << 1;
+
+ if (bfrom) {
+ for (i = 0; i < n - 1; i++)
+ memcpy32_fromio(d + i * j, s + i * t, j);
+
+ /* the last section */
+ memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
+ } else {
+ for (i = 0; i < n - 1; i++)
+ memcpy32_toio(&s[i * t], &d[i * j], j);
+
+ /* the last section */
+ memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+ }
+}
+
+/*
+ * MXC NANDFC can only perform full page+spare or spare-only read/write. When
+ * the upper layers perform a read/write buf operation, the saved column address
+ * is used to index into the full page. So usually this function is called with
+ * column == 0 (unless no column cycle is needed indicated by column == -1)
+ */
+static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /* Write out column address, if necessary */
+ if (column != -1) {
+ host->devtype_data->send_addr(host, column & 0xff,
+ page_addr == -1);
+ if (mtd->writesize > 512)
+ /* another col addr cycle for 2k page */
+ host->devtype_data->send_addr(host,
+ (column >> 8) & 0xff,
+ false);
+ }
+
+ /* Write out page address, if necessary */
+ if (page_addr != -1) {
+ /* paddr_0 - p_addr_7 */
+ host->devtype_data->send_addr(host, (page_addr & 0xff), false);
+
+ if (mtd->writesize > 512) {
+ if (mtd->size >= 0x10000000) {
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff,
+ false);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 16) & 0xff,
+ true);
+ } else
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff, true);
+ } else {
+ /* One more address cycle for higher density devices */
+ if (mtd->size >= 0x4000000) {
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff,
+ false);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 16) & 0xff,
+ true);
+ } else
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff, true);
+ }
+ }
+}
+
+/*
+ * v2 and v3 type controllers can do 4bit or 8bit ecc depending
+ * on how much oob the nand chip has. For 8bit ecc we need at least
+ * 26 bytes of oob data per 512 byte block.
+ */
+static int get_eccsize(struct mtd_info *mtd)
+{
+ int oobbytes_per_512 = 0;
+
+ oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
+
+ if (oobbytes_per_512 < 26)
+ return 4;
+ else
+ return 8;
+}
+
+static void preset_v1(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t config1 = 0;
+
+ if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
+ config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+ if (!host->devtype_data->irqpending_quirk)
+ config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ host->eccsize = 1;
+
+ writew(config1, NFC_V1_V2_CONFIG1);
+ /* preset operation */
+
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, NFC_V1_V2_CONFIG);
+
+ /* Blocks to be unlocked */
+ writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v2(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t config1 = 0;
+
+ config1 |= NFC_V2_CONFIG1_FP_INT;
+
+ if (!host->devtype_data->irqpending_quirk)
+ config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ if (mtd->writesize) {
+ uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
+
+ if (nand_chip->ecc.mode == NAND_ECC_HW)
+ config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 4)
+ config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
+
+ config1 |= NFC_V2_CONFIG1_PPB(ffs(pages_per_block) - 6);
+ } else {
+ host->eccsize = 1;
+ }
+
+ writew(config1, NFC_V1_V2_CONFIG1);
+ /* preset operation */
+
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, NFC_V1_V2_CONFIG);
+
+ /* Blocks to be unlocked */
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v3(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxc_nand_host *host = chip->priv;
+ uint32_t config2, config3;
+ int i, addr_phases;
+
+ writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
+ writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
+
+ /* Unlock the internal RAM Buffer */
+ writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+ NFC_V3_WRPROT);
+
+ /* Blocks to be unlocked */
+ for (i = 0; i < NAND_MAX_CHIPS; i++)
+ writel(0x0 | (0xffff << 16),
+ NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
+
+ writel(0, NFC_V3_IPC);
+
+ config2 = NFC_V3_CONFIG2_ONE_CYCLE |
+ NFC_V3_CONFIG2_2CMD_PHASES |
+ NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
+ NFC_V3_CONFIG2_ST_CMD(0x70) |
+ NFC_V3_CONFIG2_INT_MSK |
+ NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
+
+ addr_phases = fls(chip->pagemask) >> 3;
+
+ if (mtd->writesize == 2048) {
+ config2 |= NFC_V3_CONFIG2_PS_2048;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else if (mtd->writesize == 4096) {
+ config2 |= NFC_V3_CONFIG2_PS_4096;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else {
+ config2 |= NFC_V3_CONFIG2_PS_512;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
+ }
+
+ if (mtd->writesize) {
+ if (chip->ecc.mode == NAND_ECC_HW)
+ config2 |= NFC_V3_CONFIG2_ECC_EN;
+
+ config2 |= NFC_V3_CONFIG2_PPB(
+ ffs(mtd->erasesize / mtd->writesize) - 6,
+ host->devtype_data->ppb_shift);
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 8)
+ config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
+ }
+
+ writel(config2, NFC_V3_CONFIG2);
+
+ config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
+ NFC_V3_CONFIG3_NO_SDMA |
+ NFC_V3_CONFIG3_RBB_MODE |
+ NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+ NFC_V3_CONFIG3_ADD_OP(0);
+
+ if (!(chip->options & NAND_BUSWIDTH_16))
+ config3 |= NFC_V3_CONFIG3_FW8;
+
+ writel(config3, NFC_V3_CONFIG3);
+
+ writel(0, NFC_V3_DELAY_LINE);
+}
+
+/* Used by the upper layer to write command to NAND Flash for
+ * different operations to be carried out on NAND Flash */
+static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ command, column, page_addr);
+
+ /* Reset command state information */
+ host->status_request = false;
+
+ /* Command pre-processing step */
+ switch (command) {
+ case NAND_CMD_RESET:
+ host->devtype_data->preset(mtd);
+ host->devtype_data->send_cmd(host, command, false);
+ break;
+
+ case NAND_CMD_STATUS:
+ host->buf_start = 0;
+ host->status_request = true;
+
+ host->devtype_data->send_cmd(host, command, true);
+ WARN_ONCE(column != -1 || page_addr != -1,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ break;
+
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ if (command == NAND_CMD_READ0)
+ host->buf_start = column;
+ else
+ host->buf_start = column + mtd->writesize;
+
+ command = NAND_CMD_READ0; /* only READ0 is valid */
+
+ host->devtype_data->send_cmd(host, command, false);
+ WARN_ONCE(column < 0,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, 0, page_addr);
+
+ if (mtd->writesize > 512)
+ host->devtype_data->send_cmd(host,
+ NAND_CMD_READSTART, true);
+
+ host->devtype_data->send_page(mtd, NFC_OUTPUT);
+
+ memcpy32_fromio(host->data_buf, host->main_area0,
+ mtd->writesize);
+ copy_spare(mtd, true);
+ break;
+
+ case NAND_CMD_SEQIN:
+ if (column >= mtd->writesize)
+ /* call ourself to read a page */
+ mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
+
+ host->buf_start = column;
+
+ host->devtype_data->send_cmd(host, command, false);
+ WARN_ONCE(column < -1,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, 0, page_addr);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
+ copy_spare(mtd, false);
+ host->devtype_data->send_page(mtd, NFC_INPUT);
+ host->devtype_data->send_cmd(host, command, true);
+ WARN_ONCE(column != -1 || page_addr != -1,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ break;
+
+ case NAND_CMD_READID:
+ host->devtype_data->send_cmd(host, command, true);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ host->devtype_data->send_read_id(host);
+ host->buf_start = 0;
+ break;
+
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ host->devtype_data->send_cmd(host, command, false);
+ WARN_ONCE(column != -1,
+ "Unexpected column value (cmd=%u, col=%d)\n",
+ command, column);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+
+ break;
+ case NAND_CMD_PARAM:
+ host->devtype_data->send_cmd(host, command, false);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ host->devtype_data->send_page(mtd, NFC_OUTPUT);
+ memcpy32_fromio(host->data_buf, host->main_area0, 512);
+ host->buf_start = 0;
+ break;
+ default:
+ WARN_ONCE(1, "Unimplemented command (cmd=%u)\n",
+ command);
+ break;
+ }
+}
+
+/*
+ * The generic flash bbt decriptors overlap with our ecc
+ * hardware, so define some i.MX specific ones.
+ */
+static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+/* v1 + irqpending_quirk: i.MX21 */
+static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
+ .preset = preset_v1,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v1,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v1,
+ .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv1_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v1,
+ .irqpending_quirk = 1,
+ .needs_ip = 0,
+ .regs_offset = 0xe00,
+ .spare0_offset = 0x800,
+ .spare_len = 16,
+ .eccbytes = 3,
+ .eccsize = 1,
+};
+
+/* v1 + !irqpending_quirk: i.MX27, i.MX31 */
+static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
+ .preset = preset_v1,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v1,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v1,
+ .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv1_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v1,
+ .irqpending_quirk = 0,
+ .needs_ip = 0,
+ .regs_offset = 0xe00,
+ .spare0_offset = 0x800,
+ .axi_offset = 0,
+ .spare_len = 16,
+ .eccbytes = 3,
+ .eccsize = 1,
+};
+
+/* v21: i.MX25, i.MX35 */
+static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
+ .preset = preset_v2,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v2,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v2,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_4k,
+ .select_chip = mxc_nand_select_chip_v2,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 0,
+ .regs_offset = 0x1e00,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0,
+ .spare_len = 64,
+ .eccbytes = 9,
+ .eccsize = 0,
+};
+
+/* v3.2a: i.MX51 */
+static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
+ .preset = preset_v3,
+ .send_cmd = send_cmd_v3,
+ .send_addr = send_addr_v3,
+ .send_page = send_page_v3,
+ .send_read_id = send_read_id_v3,
+ .get_dev_status = get_dev_status_v3,
+ .check_int = check_int_v3,
+ .irq_control = irq_control_v3,
+ .get_ecc_status = get_ecc_status_v3,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 1,
+ .regs_offset = 0,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0x1e00,
+ .spare_len = 64,
+ .eccbytes = 0,
+ .eccsize = 0,
+ .ppb_shift = 7,
+};
+
+/* v3.2b: i.MX53 */
+static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
+ .preset = preset_v3,
+ .send_cmd = send_cmd_v3,
+ .send_addr = send_addr_v3,
+ .send_page = send_page_v3,
+ .send_read_id = send_read_id_v3,
+ .get_dev_status = get_dev_status_v3,
+ .check_int = check_int_v3,
+ .irq_control = irq_control_v3,
+ .get_ecc_status = get_ecc_status_v3,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 1,
+ .regs_offset = 0,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0x1e00,
+ .spare_len = 64,
+ .eccbytes = 0,
+ .eccsize = 0,
+ .ppb_shift = 8,
+};
+
+static inline int is_imx21_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx21_nand_devtype_data;
+}
+
+static inline int is_imx27_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx27_nand_devtype_data;
+}
+
+static inline int is_imx25_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx25_nand_devtype_data;
+}
+
+static inline int is_imx51_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx51_nand_devtype_data;
+}
+
+static inline int is_imx53_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx53_nand_devtype_data;
+}
+
+static struct platform_device_id mxcnd_devtype[] = {
+ {
+ .name = "imx21-nand",
+ .driver_data = (kernel_ulong_t) &imx21_nand_devtype_data,
+ }, {
+ .name = "imx27-nand",
+ .driver_data = (kernel_ulong_t) &imx27_nand_devtype_data,
+ }, {
+ .name = "imx25-nand",
+ .driver_data = (kernel_ulong_t) &imx25_nand_devtype_data,
+ }, {
+ .name = "imx51-nand",
+ .driver_data = (kernel_ulong_t) &imx51_nand_devtype_data,
+ }, {
+ .name = "imx53-nand",
+ .driver_data = (kernel_ulong_t) &imx53_nand_devtype_data,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxcnd_devtype);
+
+#ifdef CONFIG_OF_MTD
+static const struct of_device_id mxcnd_dt_ids[] = {
+ {
+ .compatible = "fsl,imx21-nand",
+ .data = &imx21_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx27-nand",
+ .data = &imx27_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx25-nand",
+ .data = &imx25_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx51-nand",
+ .data = &imx51_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx53-nand",
+ .data = &imx53_nand_devtype_data,
+ },
+ { /* sentinel */ }
+};
+
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+ struct device_node *np = host->dev->of_node;
+ struct mxc_nand_platform_data *pdata = &host->pdata;
+ const struct of_device_id *of_id =
+ of_match_device(mxcnd_dt_ids, host->dev);
+ int buswidth;
+
+ if (!np)
+ return 1;
+
+ if (of_get_nand_ecc_mode(np) >= 0)
+ pdata->hw_ecc = 1;
+
+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
+ buswidth = of_get_nand_bus_width(np);
+ if (buswidth < 0)
+ return buswidth;
+
+ pdata->width = buswidth / 8;
+
+ host->devtype_data = of_id->data;
+
+ return 0;
+}
+#else
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+ return 1;
+}
+#endif
+
+static int mxcnd_probe(struct platform_device *pdev)
+{
+ struct nand_chip *this;
+ struct mtd_info *mtd;
+ struct mxc_nand_host *host;
+ struct resource *res;
+ int err = 0;
+
+ /* Allocate memory for MTD device structure and private data */
+ host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host),
+ GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ /* allocate a temporary buffer for the nand_scan_ident() */
+ host->data_buf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL);
+ if (!host->data_buf)
+ return -ENOMEM;
+
+ host->dev = &pdev->dev;
+ /* structures must be linked */
+ this = &host->nand;
+ mtd = &host->mtd;
+ mtd->priv = this;
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = &pdev->dev;
+ mtd->name = DRIVER_NAME;
+
+ /* 50 us command delay time */
+ this->chip_delay = 5;
+
+ this->priv = host;
+ this->dev_ready = mxc_nand_dev_ready;
+ this->cmdfunc = mxc_nand_command;
+ this->read_byte = mxc_nand_read_byte;
+ this->read_word = mxc_nand_read_word;
+ this->write_buf = mxc_nand_write_buf;
+ this->read_buf = mxc_nand_read_buf;
+
+ host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk))
+ return PTR_ERR(host->clk);
+
+ err = mxcnd_probe_dt(host);
+ if (err > 0) {
+ struct mxc_nand_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ if (pdata) {
+ host->pdata = *pdata;
+ host->devtype_data = (struct mxc_nand_devtype_data *)
+ pdev->id_entry->driver_data;
+ } else {
+ err = -ENODEV;
+ }
+ }
+ if (err < 0)
+ return err;
+
+ if (host->devtype_data->needs_ip) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->regs_ip = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->regs_ip))
+ return PTR_ERR(host->regs_ip);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ } else {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ }
+
+ host->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->base))
+ return PTR_ERR(host->base);
+
+ host->main_area0 = host->base;
+
+ if (host->devtype_data->regs_offset)
+ host->regs = host->base + host->devtype_data->regs_offset;
+ host->spare0 = host->base + host->devtype_data->spare0_offset;
+ if (host->devtype_data->axi_offset)
+ host->regs_axi = host->base + host->devtype_data->axi_offset;
+
+ this->ecc.bytes = host->devtype_data->eccbytes;
+ host->eccsize = host->devtype_data->eccsize;
+
+ this->select_chip = host->devtype_data->select_chip;
+ this->ecc.size = 512;
+ this->ecc.layout = host->devtype_data->ecclayout_512;
+
+ if (host->pdata.hw_ecc) {
+ this->ecc.calculate = mxc_nand_calculate_ecc;
+ this->ecc.hwctl = mxc_nand_enable_hwecc;
+ this->ecc.correct = host->devtype_data->correct_data;
+ this->ecc.mode = NAND_ECC_HW;
+ } else {
+ this->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ /* NAND bus width determines access functions used by upper layer */
+ if (host->pdata.width == 2)
+ this->options |= NAND_BUSWIDTH_16;
+
+ if (host->pdata.flash_bbt) {
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+ /* update flash based bbt */
+ this->bbt_options |= NAND_BBT_USE_FLASH;
+ }
+
+ init_completion(&host->op_completion);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq < 0)
+ return host->irq;
+
+ /*
+ * Use host->devtype_data->irq_control() here instead of irq_control()
+ * because we must not disable_irq_nosync without having requested the
+ * irq.
+ */
+ host->devtype_data->irq_control(host, 0);
+
+ err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
+ 0, DRIVER_NAME, host);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(host->clk);
+ if (err)
+ return err;
+ host->clk_act = 1;
+
+ /*
+ * Now that we "own" the interrupt make sure the interrupt mask bit is
+ * cleared on i.MX21. Otherwise we can't read the interrupt status bit
+ * on this machine.
+ */
+ if (host->devtype_data->irqpending_quirk) {
+ disable_irq_nosync(host->irq);
+ host->devtype_data->irq_control(host, 1);
+ }
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) {
+ err = -ENXIO;
+ goto escan;
+ }
+
+ /* allocate the right size buffer now */
+ devm_kfree(&pdev->dev, (void *)host->data_buf);
+ host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
+ GFP_KERNEL);
+ if (!host->data_buf) {
+ err = -ENOMEM;
+ goto escan;
+ }
+
+ /* Call preset again, with correct writesize this time */
+ host->devtype_data->preset(mtd);
+
+ if (mtd->writesize == 2048)
+ this->ecc.layout = host->devtype_data->ecclayout_2k;
+ else if (mtd->writesize == 4096)
+ this->ecc.layout = host->devtype_data->ecclayout_4k;
+
+ if (this->ecc.mode == NAND_ECC_HW) {
+ if (is_imx21_nfc(host) || is_imx27_nfc(host))
+ this->ecc.strength = 1;
+ else
+ this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
+ }
+
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ err = -ENXIO;
+ goto escan;
+ }
+
+ /* Register the partitions */
+ mtd_device_parse_register(mtd, part_probes,
+ &(struct mtd_part_parser_data){
+ .of_node = pdev->dev.of_node,
+ },
+ host->pdata.parts,
+ host->pdata.nr_parts);
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+
+escan:
+ if (host->clk_act)
+ clk_disable_unprepare(host->clk);
+
+ return err;
+}
+
+static int mxcnd_remove(struct platform_device *pdev)
+{
+ struct mxc_nand_host *host = platform_get_drvdata(pdev);
+
+ nand_release(&host->mtd);
+ if (host->clk_act)
+ clk_disable_unprepare(host->clk);
+
+ return 0;
+}
+
+static struct platform_driver mxcnd_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(mxcnd_dt_ids),
+ },
+ .id_table = mxcnd_devtype,
+ .probe = mxcnd_probe,
+ .remove = mxcnd_remove,
+};
+module_platform_driver(mxcnd_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MXC NAND MTD driver");
+MODULE_LICENSE("GPL");