diff options
Diffstat (limited to 'drivers/mtd/nand/sharpsl.c')
| -rw-r--r-- | drivers/mtd/nand/sharpsl.c | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c new file mode 100644 index 000000000..842c47a45 --- /dev/null +++ b/drivers/mtd/nand/sharpsl.c @@ -0,0 +1,232 @@ +/* + * drivers/mtd/nand/sharpsl.c + * + * Copyright (C) 2004 Richard Purdie + * Copyright (C) 2008 Dmitry Baryshkov + * + * Based on Sharp's NAND driver sharp_sl.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/genhd.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/sharpsl.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +struct sharpsl_nand { + struct mtd_info mtd; + struct nand_chip chip; + + void __iomem *io; +}; + +#define mtd_to_sharpsl(_mtd) container_of(_mtd, struct sharpsl_nand, mtd) + +/* register offset */ +#define ECCLPLB 0x00 /* line parity 7 - 0 bit */ +#define ECCLPUB 0x04 /* line parity 15 - 8 bit */ +#define ECCCP 0x08 /* column parity 5 - 0 bit */ +#define ECCCNTR 0x0C /* ECC byte counter */ +#define ECCCLRR 0x10 /* cleare ECC */ +#define FLASHIO 0x14 /* Flash I/O */ +#define FLASHCTL 0x18 /* Flash Control */ + +/* Flash control bit */ +#define FLRYBY (1 << 5) +#define FLCE1 (1 << 4) +#define FLWP (1 << 3) +#define FLALE (1 << 2) +#define FLCLE (1 << 1) +#define FLCE0 (1 << 0) + +/* + * hardware specific access to control-lines + * ctrl: + * NAND_CNE: bit 0 -> ! bit 0 & 4 + * NAND_CLE: bit 1 -> bit 1 + * NAND_ALE: bit 2 -> bit 2 + * + */ +static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd); + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char bits = ctrl & 0x07; + + bits |= (ctrl & 0x01) << 4; + + bits ^= 0x11; + + writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); +} + +static int sharpsl_nand_dev_ready(struct mtd_info *mtd) +{ + struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd); + return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0); +} + +static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode) +{ + struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd); + writeb(0, sharpsl->io + ECCCLRR); +} + +static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code) +{ + struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd); + ecc_code[0] = ~readb(sharpsl->io + ECCLPUB); + ecc_code[1] = ~readb(sharpsl->io + ECCLPLB); + ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03; + return readb(sharpsl->io + ECCCNTR) != 0; +} + +/* + * Main initialization routine + */ +static int sharpsl_nand_probe(struct platform_device *pdev) +{ + struct nand_chip *this; + struct resource *r; + int err = 0; + struct sharpsl_nand *sharpsl; + struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev); + + if (!data) { + dev_err(&pdev->dev, "no platform data!\n"); + return -EINVAL; + } + + /* Allocate memory for MTD device structure and private data */ + sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL); + if (!sharpsl) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no io memory resource defined!\n"); + err = -ENODEV; + goto err_get_res; + } + + /* map physical address */ + sharpsl->io = ioremap(r->start, resource_size(r)); + if (!sharpsl->io) { + dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n"); + err = -EIO; + goto err_ioremap; + } + + /* Get pointer to private data */ + this = (struct nand_chip *)(&sharpsl->chip); + + /* Link the private data with the MTD structure */ + sharpsl->mtd.priv = this; + sharpsl->mtd.owner = THIS_MODULE; + + platform_set_drvdata(pdev, sharpsl); + + /* + * PXA initialize + */ + writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL); + + /* Set address of NAND IO lines */ + this->IO_ADDR_R = sharpsl->io + FLASHIO; + this->IO_ADDR_W = sharpsl->io + FLASHIO; + /* Set address of hardware control function */ + this->cmd_ctrl = sharpsl_nand_hwcontrol; + this->dev_ready = sharpsl_nand_dev_ready; + /* 15 us command delay time */ + this->chip_delay = 15; + /* set eccmode using hardware ECC */ + this->ecc.mode = NAND_ECC_HW; + this->ecc.size = 256; + this->ecc.bytes = 3; + this->ecc.strength = 1; + this->badblock_pattern = data->badblock_pattern; + this->ecc.layout = data->ecc_layout; + this->ecc.hwctl = sharpsl_nand_enable_hwecc; + this->ecc.calculate = sharpsl_nand_calculate_ecc; + this->ecc.correct = nand_correct_data; + + /* Scan to find existence of the device */ + err = nand_scan(&sharpsl->mtd, 1); + if (err) + goto err_scan; + + /* Register the partitions */ + sharpsl->mtd.name = "sharpsl-nand"; + + err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL, + data->partitions, data->nr_partitions); + if (err) + goto err_add; + + /* Return happy */ + return 0; + +err_add: + nand_release(&sharpsl->mtd); + +err_scan: + iounmap(sharpsl->io); +err_ioremap: +err_get_res: + kfree(sharpsl); + return err; +} + +/* + * Clean up routine + */ +static int sharpsl_nand_remove(struct platform_device *pdev) +{ + struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev); + + /* Release resources, unregister device */ + nand_release(&sharpsl->mtd); + + iounmap(sharpsl->io); + + /* Free the MTD device structure */ + kfree(sharpsl); + + return 0; +} + +static struct platform_driver sharpsl_nand_driver = { + .driver = { + .name = "sharpsl-nand", + }, + .probe = sharpsl_nand_probe, + .remove = sharpsl_nand_remove, +}; + +module_platform_driver(sharpsl_nand_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>"); +MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series"); |