diff options
Diffstat (limited to 'drivers/net/arcnet/com20020-pci.c')
-rw-r--r-- | drivers/net/arcnet/com20020-pci.c | 175 |
1 files changed, 152 insertions, 23 deletions
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index 96edc1346..239de38fb 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -1,7 +1,7 @@ /* * Linux ARCnet driver - COM20020 PCI support * Contemporary Controls PCI20 and SOHARD SH-ARC PCI - * + * * Written 1994-1999 by Avery Pennarun, * based on an ISA version by David Woodhouse. * Written 1999-2000 by Martin Mares <mj@ucw.cz>. @@ -26,6 +26,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> @@ -36,14 +39,12 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/pci.h> -#include <linux/arcdevice.h> -#include <linux/com20020.h> #include <linux/list.h> +#include <linux/io.h> +#include <linux/leds.h> -#include <asm/io.h> - - -#define VERSION "arcnet: COM20020 PCI support\n" +#include "arcdevice.h" +#include "com20020.h" /* Module parameters */ @@ -62,11 +63,43 @@ module_param(clockp, int, 0); module_param(clockm, int, 0); MODULE_LICENSE("GPL"); +static void led_tx_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct com20020_dev *card; + struct com20020_priv *priv; + struct com20020_pci_card_info *ci; + + card = container_of(led_cdev, struct com20020_dev, tx_led); + + priv = card->pci_priv; + ci = priv->ci; + + outb(!!value, priv->misc + ci->leds[card->index].green); +} + +static void led_recon_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct com20020_dev *card; + struct com20020_priv *priv; + struct com20020_pci_card_info *ci; + + card = container_of(led_cdev, struct com20020_dev, recon_led); + + priv = card->pci_priv; + ci = priv->ci; + + outb(!!value, priv->misc + ci->leds[card->index].red); +} + static void com20020pci_remove(struct pci_dev *pdev); -static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int com20020pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) { struct com20020_pci_card_info *ci; + struct com20020_pci_channel_map *mm; struct net_device *dev; struct arcnet_local *lp; struct com20020_priv *priv; @@ -83,9 +116,21 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i ci = (struct com20020_pci_card_info *)id->driver_data; priv->ci = ci; + mm = &ci->misc_map; INIT_LIST_HEAD(&priv->list_dev); + if (mm->size) { + ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset; + r = devm_request_region(&pdev->dev, ioaddr, mm->size, + "com20020-pci"); + if (!r) { + pr_err("IO region %xh-%xh already allocated.\n", + ioaddr, ioaddr + mm->size - 1); + return -EBUSY; + } + priv->misc = ioaddr; + } for (i = 0; i < ci->devcount; i++) { struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i]; @@ -96,18 +141,19 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i ret = -ENOMEM; goto out_port; } + dev->dev_port = i; dev->netdev_ops = &com20020_netdev_ops; lp = netdev_priv(dev); - BUGMSG(D_NORMAL, "%s Controls\n", ci->name); + arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name); ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset; r = devm_request_region(&pdev->dev, ioaddr, cm->size, "com20020-pci"); if (!r) { - pr_err("IO region %xh-%xh already allocated.\n", + pr_err("IO region %xh-%xh already allocated\n", ioaddr, ioaddr + cm->size - 1); ret = -EBUSY; goto out_port; @@ -117,8 +163,8 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i * ARCNET controller needs * this access to detect bustype */ - outb(0x00, ioaddr + 1); - inb(ioaddr + 1); + arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND); + arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT); dev->base_addr = ioaddr; dev->dev_addr[0] = node; @@ -131,7 +177,14 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i lp->timeout = timeout; lp->hw.owner = THIS_MODULE; - if (ASTATUS() == 0xFF) { + /* Get the dev_id from the PLX rotary coder */ + if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) + dev->dev_id = 0xc; + dev->dev_id ^= inb(priv->misc + ci->rotary) >> 4; + + snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); + + if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { pr_err("IO address %Xh is empty!\n", ioaddr); ret = -EIO; goto out_port; @@ -143,21 +196,46 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), GFP_KERNEL); - if (!card) { - pr_err("%s out of memory!\n", __func__); + if (!card) return -ENOMEM; - } card->index = i; card->pci_priv = priv; + card->tx_led.brightness_set = led_tx_set; + card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-tx", + dev->dev_id, i); + card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:green:tx:%d-%d", + dev->dev_id, i); + + card->tx_led.dev = &dev->dev; + card->recon_led.brightness_set = led_recon_set; + card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-recon", + dev->dev_id, i); + card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:red:recon:%d-%d", + dev->dev_id, i); + card->recon_led.dev = &dev->dev; card->dev = dev; + ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); + if (ret) + goto out_port; + + ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); + if (ret) + goto out_port; + dev_set_drvdata(&dev->dev, card); ret = com20020_found(dev, IRQF_SHARED); if (ret) goto out_port; + devm_arcnet_led_init(dev, dev->dev_id, i); + list_add(&card->list, &priv->list_dev); } @@ -190,7 +268,11 @@ static struct com20020_pci_card_info card_info_10mbit = { .name = "ARC-PCI", .devcount = 1, .chan_map_tbl = { - { 2, 0x00, 0x08 }, + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, }, .flags = ARC_CAN_10MBIT, }; @@ -199,7 +281,11 @@ static struct com20020_pci_card_info card_info_5mbit = { .name = "ARC-PCI", .devcount = 1, .chan_map_tbl = { - { 2, 0x00, 0x08 }, + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, }, .flags = ARC_IS_5MBIT, }; @@ -209,7 +295,11 @@ static struct com20020_pci_card_info card_info_sohard = { .devcount = 1, /* SOHARD needs PCI base addr 4 */ .chan_map_tbl = { - {4, 0x00, 0x08}, + { + .bar = 4, + .offset = 0x00, + .size = 0x08 + }, }, .flags = ARC_CAN_10MBIT, }; @@ -218,8 +308,24 @@ static struct com20020_pci_card_info card_info_eae_arc1 = { .name = "EAE PLX-PCI ARC1", .devcount = 1, .chan_map_tbl = { - { 2, 0x00, 0x08 }, + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, + }, + .rotary = 0x0, .flags = ARC_CAN_10MBIT, }; @@ -227,9 +333,31 @@ static struct com20020_pci_card_info card_info_eae_ma1 = { .name = "EAE PLX-PCI MA1", .devcount = 2, .chan_map_tbl = { - { 2, 0x00, 0x08 }, - { 2, 0x08, 0x08 } + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, { + .bar = 2, + .offset = 0x08, + .size = 0x08, + } + }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, { + .green = 0x2, + .red = 0x3, + }, }, + .rotary = 0x0, .flags = ARC_CAN_10MBIT, }; @@ -404,7 +532,8 @@ static struct pci_driver com20020pci_driver = { static int __init com20020pci_init(void) { - BUGLVL(D_NORMAL) printk(VERSION); + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 PCI support"); return pci_register_driver(&com20020pci_driver); } |