summaryrefslogtreecommitdiff
path: root/drivers/net/can/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/Kconfig')
-rw-r--r--drivers/net/can/Kconfig66
1 files changed, 30 insertions, 36 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 6d04183ed..0d40aef92 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -70,13 +70,6 @@ config CAN_AT91
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
and AT91SAM9X5 processors.
-config CAN_TI_HECC
- depends on ARM
- tristate "TI High End CAN Controller"
- ---help---
- Driver for TI HECC (High End CAN Controller) module found on many
- TI devices. The device specifications are available from www.ti.com
-
config CAN_BFIN
depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x
tristate "Analog Devices Blackfin on-chip CAN"
@@ -86,30 +79,12 @@ config CAN_BFIN
To compile this driver as a module, choose M here: the
module will be called bfin_can.
-config CAN_JANZ_ICAN3
- tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
- depends on MFD_JANZ_CMODIO
- ---help---
- Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
- connects to a MODULbus carrier board.
-
- This driver can also be built as a module. If so, the module will be
- called janz-ican3.ko.
-
config CAN_FLEXCAN
tristate "Support for Freescale FLEXCAN based chips"
depends on ARM || PPC
---help---
Say Y here if you want to support for Freescale FlexCAN.
-config PCH_CAN
- tristate "Intel EG20T PCH CAN controller"
- depends on PCI && (X86_32 || COMPILE_TEST)
- ---help---
- This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
- is an IOH for x86 embedded processor (Intel Atom E6xx series).
- This driver can access CAN bus.
-
config CAN_GRCAN
tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
depends on OF && HAS_DMA
@@ -119,9 +94,19 @@ config CAN_GRCAN
endian syntheses of the cores would need some modifications on
the hardware level to work.
+config CAN_JANZ_ICAN3
+ tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
+ depends on MFD_JANZ_CMODIO
+ ---help---
+ Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
+ connects to a MODULbus carrier board.
+
+ This driver can also be built as a module. If so, the module will be
+ called janz-ican3.ko.
+
config CAN_RCAR
tristate "Renesas R-Car CAN controller"
- depends on ARM
+ depends on ARCH_RENESAS || ARM
---help---
Say Y here if you want to use CAN controller found on Renesas R-Car
SoCs.
@@ -139,6 +124,13 @@ config CAN_SUN4I
To compile this driver as a module, choose M here: the module will
be called sun4i_can.
+config CAN_TI_HECC
+ depends on ARM
+ tristate "TI High End CAN Controller"
+ ---help---
+ Driver for TI HECC (High End CAN Controller) module found on many
+ TI devices. The device specifications are available from www.ti.com
+
config CAN_XILINXCAN
tristate "Xilinx CAN"
depends on ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST
@@ -147,22 +139,24 @@ config CAN_XILINXCAN
Xilinx CAN driver. This driver supports both soft AXI CAN IP and
Zynq CANPS IP.
-source "drivers/net/can/mscan/Kconfig"
-
-source "drivers/net/can/sja1000/Kconfig"
+config PCH_CAN
+ tristate "Intel EG20T PCH CAN controller"
+ depends on PCI && (X86_32 || COMPILE_TEST)
+ ---help---
+ This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
+ is an IOH for x86 embedded processor (Intel Atom E6xx series).
+ This driver can access CAN bus.
source "drivers/net/can/c_can/Kconfig"
-
-source "drivers/net/can/m_can/Kconfig"
-
source "drivers/net/can/cc770/Kconfig"
-
+source "drivers/net/can/ifi_canfd/Kconfig"
+source "drivers/net/can/m_can/Kconfig"
+source "drivers/net/can/mscan/Kconfig"
+source "drivers/net/can/sja1000/Kconfig"
+source "drivers/net/can/softing/Kconfig"
source "drivers/net/can/spi/Kconfig"
-
source "drivers/net/can/usb/Kconfig"
-source "drivers/net/can/softing/Kconfig"
-
endif
config CAN_DEBUG_DEVICES