diff options
Diffstat (limited to 'drivers/net/can/sja1000/peak_pci.c')
| -rw-r--r-- | drivers/net/can/sja1000/peak_pci.c | 765 |
1 files changed, 765 insertions, 0 deletions
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c new file mode 100644 index 000000000..e5fac3680 --- /dev/null +++ b/drivers/net/can/sja1000/peak_pci.c @@ -0,0 +1,765 @@ +/* + * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com> + * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com> + * + * Derived from the PCAN project file driver/src/pcan_pci.c: + * + * Copyright (C) 2001-2006 PEAK System-Technik GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/can.h> +#include <linux/can/dev.h> + +#include "sja1000.h" + +MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>"); +MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards"); +MODULE_LICENSE("GPL v2"); + +#define DRV_NAME "peak_pci" + +struct peak_pciec_card; +struct peak_pci_chan { + void __iomem *cfg_base; /* Common for all channels */ + struct net_device *prev_dev; /* Chain of network devices */ + u16 icr_mask; /* Interrupt mask for fast ack */ + struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */ +}; + +#define PEAK_PCI_CAN_CLOCK (16000000 / 2) + +#define PEAK_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) +#define PEAK_PCI_OCR OCR_TX0_PUSHPULL + +/* + * Important PITA registers + */ +#define PITA_ICR 0x00 /* Interrupt control register */ +#define PITA_GPIOICR 0x18 /* GPIO interface control register */ +#define PITA_MISC 0x1C /* Miscellaneous register */ + +#define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */ +#define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */ + +#define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */ +#define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ +#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ +#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ +#define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */ +#define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */ +#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */ +#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */ +#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */ +#define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */ +#define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */ + +#define PEAK_PCI_CHAN_MAX 4 + +static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = { + 0x02, 0x01, 0x40, 0x80 +}; + +static const struct pci_device_id peak_pci_tbl[] = { + {PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, +#ifdef CONFIG_CAN_PEAK_PCIEC + {PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, +#endif + {0,} +}; + +MODULE_DEVICE_TABLE(pci, peak_pci_tbl); + +#ifdef CONFIG_CAN_PEAK_PCIEC +/* + * PCAN-ExpressCard needs I2C bit-banging configuration option. + */ + +/* GPIOICR byte access offsets */ +#define PITA_GPOUT 0x18 /* GPx output value */ +#define PITA_GPIN 0x19 /* GPx input value */ +#define PITA_GPOEN 0x1A /* configure GPx as ouput pin */ + +/* I2C GP bits */ +#define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ +#define PITA_GPIN_SDA 0x04 /* Serial DAta line */ + +#define PCA9553_1_SLAVEADDR (0xC4 >> 1) + +/* PCA9553 LS0 fields values */ +enum { + PCA9553_LOW, + PCA9553_HIGHZ, + PCA9553_PWM0, + PCA9553_PWM1 +}; + +/* LEDs control */ +#define PCA9553_ON PCA9553_LOW +#define PCA9553_OFF PCA9553_HIGHZ +#define PCA9553_SLOW PCA9553_PWM0 +#define PCA9553_FAST PCA9553_PWM1 + +#define PCA9553_LED(c) (1 << (c)) +#define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1)) + +#define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c) +#define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c) +#define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c) +#define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c) +#define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c) + +#define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1)) + +#define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */ + +struct peak_pciec_chan { + struct net_device *netdev; + unsigned long prev_rx_bytes; + unsigned long prev_tx_bytes; +}; + +struct peak_pciec_card { + void __iomem *cfg_base; /* Common for all channels */ + void __iomem *reg_base; /* first channel base address */ + u8 led_cache; /* leds state cache */ + + /* PCIExpressCard i2c data */ + struct i2c_algo_bit_data i2c_bit; + struct i2c_adapter led_chip; + struct delayed_work led_work; /* led delayed work */ + int chan_count; + struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX]; +}; + +/* "normal" pci register write callback is overloaded for leds control */ +static void peak_pci_write_reg(const struct sja1000_priv *priv, + int port, u8 val); + +static inline void pita_set_scl_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL; + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static inline void pita_set_sda_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA; + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card) +{ + /* raise SCL & SDA GPIOs to high-Z */ + pita_set_scl_highz(card); + pita_set_sda_highz(card); +} + +static void pita_setsda(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output sda always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output sda with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SDA; + else + gp_outen |= PITA_GPIN_SDA; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void pita_setscl(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output scl always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output scl with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SCL; + else + gp_outen |= PITA_GPIN_SCL; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static int pita_getsda(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_sda_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0; +} + +static int pita_getscl(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_scl_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0; +} + +/* + * write commands to the LED chip though the I2C-bus of the PCAN-PCIeC + */ +static int peak_pciec_write_pca9553(struct peak_pciec_card *card, + u8 offset, u8 data) +{ + u8 buffer[2] = { + offset, + data + }; + struct i2c_msg msg = { + .addr = PCA9553_1_SLAVEADDR, + .len = 2, + .buf = buffer, + }; + int ret; + + /* cache led mask */ + if ((offset == 5) && (data == card->led_cache)) + return 0; + + ret = i2c_transfer(&card->led_chip, &msg, 1); + if (ret < 0) + return ret; + + if (offset == 5) + card->led_cache = data; + + return 0; +} + +/* + * delayed work callback used to control the LEDs + */ +static void peak_pciec_led_work(struct work_struct *work) +{ + struct peak_pciec_card *card = + container_of(work, struct peak_pciec_card, led_work.work); + struct net_device *netdev; + u8 new_led = card->led_cache; + int i, up_count = 0; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) { + /* default is: not configured */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_ON(i); + + netdev = card->channel[i].netdev; + if (!netdev || !(netdev->flags & IFF_UP)) + continue; + + up_count++; + + /* no activity (but configured) */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_SLOW(i); + + /* if bytes counters changed, set fast blinking led */ + if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { + card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { + card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); + + /* restart timer (except if no more configured channels) */ + if (up_count) + schedule_delayed_work(&card->led_work, HZ); +} + +/* + * set LEDs blinking state + */ +static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s) +{ + u8 new_led = card->led_cache; + int i; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) + if (led_mask & PCA9553_LED(i)) { + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_STATE(s, i); + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); +} + +/* + * start one second delayed work to control LEDs + */ +static void peak_pciec_start_led_work(struct peak_pciec_card *card) +{ + schedule_delayed_work(&card->led_work, HZ); +} + +/* + * stop LEDs delayed work + */ +static void peak_pciec_stop_led_work(struct peak_pciec_card *card) +{ + cancel_delayed_work_sync(&card->led_work); +} + +/* + * initialize the PCA9553 4-bit I2C-bus LED chip + */ +static int peak_pciec_init_leds(struct peak_pciec_card *card) +{ + int err; + + /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */ + err = peak_pciec_write_pca9553(card, 1, 44 / 1); + if (err) + return err; + + /* duty cycle 0: 50% */ + err = peak_pciec_write_pca9553(card, 2, 0x80); + if (err) + return err; + + /* prescaler for frequency 1: "FAST" = 5 Hz */ + err = peak_pciec_write_pca9553(card, 3, 44 / 5); + if (err) + return err; + + /* duty cycle 1: 50% */ + err = peak_pciec_write_pca9553(card, 4, 0x80); + if (err) + return err; + + /* switch LEDs to initial state */ + return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT); +} + +/* + * restore LEDs state to off peak_pciec_leds_exit + */ +static void peak_pciec_leds_exit(struct peak_pciec_card *card) +{ + /* switch LEDs to off */ + peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL); +} + +/* + * normal write sja1000 register method overloaded to catch when controller + * is started or stopped, to control leds + */ +static void peak_pciec_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card = chan->pciec_card; + int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE; + + /* sja1000 register changes control the leds state */ + if (port == SJA1000_MOD) + switch (val) { + case MOD_RM: + /* Reset Mode: set led on */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON); + break; + case 0x00: + /* Normal Mode: led slow blinking and start led timer */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW); + peak_pciec_start_led_work(card); + break; + default: + break; + } + + /* call base function */ + peak_pci_write_reg(priv, port, val); +} + +static struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = { + .setsda = pita_setsda, + .setscl = pita_setscl, + .getsda = pita_getsda, + .getscl = pita_getscl, + .udelay = 10, + .timeout = HZ, +}; + +static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card; + int err; + + /* copy i2c object address from 1st channel */ + if (chan->prev_dev) { + struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev); + struct peak_pci_chan *prev_chan = prev_priv->priv; + + card = prev_chan->pciec_card; + if (!card) + return -ENODEV; + + /* channel is the first one: do the init part */ + } else { + /* create the bit banging I2C adapter structure */ + card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL); + if (!card) + return -ENOMEM; + + card->cfg_base = chan->cfg_base; + card->reg_base = priv->reg_base; + + card->led_chip.owner = THIS_MODULE; + card->led_chip.dev.parent = &pdev->dev; + card->led_chip.algo_data = &card->i2c_bit; + strncpy(card->led_chip.name, "peak_i2c", + sizeof(card->led_chip.name)); + + card->i2c_bit = peak_pciec_i2c_bit_ops; + card->i2c_bit.udelay = 10; + card->i2c_bit.timeout = HZ; + card->i2c_bit.data = card; + + peak_pciec_init_pita_gpio(card); + + err = i2c_bit_add_bus(&card->led_chip); + if (err) { + dev_err(&pdev->dev, "i2c init failed\n"); + goto pciec_init_err_1; + } + + err = peak_pciec_init_leds(card); + if (err) { + dev_err(&pdev->dev, "leds hardware init failed\n"); + goto pciec_init_err_2; + } + + INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work); + /* PCAN-ExpressCard needs its own callback for leds */ + priv->write_reg = peak_pciec_write_reg; + } + + chan->pciec_card = card; + card->channel[card->chan_count++].netdev = dev; + + return 0; + +pciec_init_err_2: + i2c_del_adapter(&card->led_chip); + +pciec_init_err_1: + peak_pciec_init_pita_gpio(card); + kfree(card); + + return err; +} + +static void peak_pciec_remove(struct peak_pciec_card *card) +{ + peak_pciec_stop_led_work(card); + peak_pciec_leds_exit(card); + i2c_del_adapter(&card->led_chip); + peak_pciec_init_pita_gpio(card); + kfree(card); +} + +#else /* CONFIG_CAN_PEAK_PCIEC */ + +/* + * Placebo functions when PCAN-ExpressCard support is not selected + */ +static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + return -ENODEV; +} + +static inline void peak_pciec_remove(struct peak_pciec_card *card) +{ +} +#endif /* CONFIG_CAN_PEAK_PCIEC */ + +static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port) +{ + return readb(priv->reg_base + (port << 2)); +} + +static void peak_pci_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + writeb(val, priv->reg_base + (port << 2)); +} + +static void peak_pci_post_irq(const struct sja1000_priv *priv) +{ + struct peak_pci_chan *chan = priv->priv; + u16 icr; + + /* Select and clear in PITA stored interrupt */ + icr = readw(chan->cfg_base + PITA_ICR); + if (icr & chan->icr_mask) + writew(chan->icr_mask, chan->cfg_base + PITA_ICR); +} + +static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct sja1000_priv *priv; + struct peak_pci_chan *chan; + struct net_device *dev, *prev_dev; + void __iomem *cfg_base, *reg_base; + u16 sub_sys_id, icr; + int i, err, channels; + + err = pci_enable_device(pdev); + if (err) + return err; + + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto failure_disable_pci; + + err = pci_read_config_word(pdev, 0x2e, &sub_sys_id); + if (err) + goto failure_release_regions; + + dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n", + pdev->vendor, pdev->device, sub_sys_id); + + err = pci_write_config_word(pdev, 0x44, 0); + if (err) + goto failure_release_regions; + + if (sub_sys_id >= 12) + channels = 4; + else if (sub_sys_id >= 10) + channels = 3; + else if (sub_sys_id >= 4) + channels = 2; + else + channels = 1; + + cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE); + if (!cfg_base) { + dev_err(&pdev->dev, "failed to map PCI resource #0\n"); + err = -ENOMEM; + goto failure_release_regions; + } + + reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels); + if (!reg_base) { + dev_err(&pdev->dev, "failed to map PCI resource #1\n"); + err = -ENOMEM; + goto failure_unmap_cfg_base; + } + + /* Set GPIO control register */ + writew(0x0005, cfg_base + PITA_GPIOICR + 2); + /* Enable all channels of this card */ + writeb(0x00, cfg_base + PITA_GPIOICR); + /* Toggle reset */ + writeb(0x05, cfg_base + PITA_MISC + 3); + mdelay(5); + /* Leave parport mux mode */ + writeb(0x04, cfg_base + PITA_MISC + 3); + + icr = readw(cfg_base + PITA_ICR + 2); + + for (i = 0; i < channels; i++) { + dev = alloc_sja1000dev(sizeof(struct peak_pci_chan)); + if (!dev) { + err = -ENOMEM; + goto failure_remove_channels; + } + + priv = netdev_priv(dev); + chan = priv->priv; + + chan->cfg_base = cfg_base; + priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE; + + priv->read_reg = peak_pci_read_reg; + priv->write_reg = peak_pci_write_reg; + priv->post_irq = peak_pci_post_irq; + + priv->can.clock.freq = PEAK_PCI_CAN_CLOCK; + priv->ocr = PEAK_PCI_OCR; + priv->cdr = PEAK_PCI_CDR; + /* Neither a slave nor a single device distributes the clock */ + if (channels == 1 || i > 0) + priv->cdr |= CDR_CLK_OFF; + + /* Setup interrupt handling */ + priv->irq_flags = IRQF_SHARED; + dev->irq = pdev->irq; + + chan->icr_mask = peak_pci_icr_masks[i]; + icr |= chan->icr_mask; + + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = i; + + /* Create chain of SJA1000 devices */ + chan->prev_dev = pci_get_drvdata(pdev); + pci_set_drvdata(pdev, dev); + + /* + * PCAN-ExpressCard needs some additional i2c init. + * This must be done *before* register_sja1000dev() but + * *after* devices linkage + */ + if (pdev->device == PEAK_PCIEC_DEVICE_ID || + pdev->device == PEAK_PCIEC34_DEVICE_ID) { + err = peak_pciec_probe(pdev, dev); + if (err) { + dev_err(&pdev->dev, + "failed to probe device (err %d)\n", + err); + goto failure_free_dev; + } + } + + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, "failed to register device\n"); + goto failure_free_dev; + } + + dev_info(&pdev->dev, + "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n", + dev->name, priv->reg_base, chan->cfg_base, dev->irq); + } + + /* Enable interrupts */ + writew(icr, cfg_base + PITA_ICR + 2); + + return 0; + +failure_free_dev: + pci_set_drvdata(pdev, chan->prev_dev); + free_sja1000dev(dev); + +failure_remove_channels: + /* Disable interrupts */ + writew(0x0, cfg_base + PITA_ICR + 2); + + chan = NULL; + for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) { + priv = netdev_priv(dev); + chan = priv->priv; + prev_dev = chan->prev_dev; + + unregister_sja1000dev(dev); + free_sja1000dev(dev); + } + + /* free any PCIeC resources too */ + if (chan && chan->pciec_card) + peak_pciec_remove(chan->pciec_card); + + pci_iounmap(pdev, reg_base); + +failure_unmap_cfg_base: + pci_iounmap(pdev, cfg_base); + +failure_release_regions: + pci_release_regions(pdev); + +failure_disable_pci: + pci_disable_device(pdev); + + return err; +} + +static void peak_pci_remove(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); /* Last device */ + struct sja1000_priv *priv = netdev_priv(dev); + struct peak_pci_chan *chan = priv->priv; + void __iomem *cfg_base = chan->cfg_base; + void __iomem *reg_base = priv->reg_base; + + /* Disable interrupts */ + writew(0x0, cfg_base + PITA_ICR + 2); + + /* Loop over all registered devices */ + while (1) { + struct net_device *prev_dev = chan->prev_dev; + + dev_info(&pdev->dev, "removing device %s\n", dev->name); + unregister_sja1000dev(dev); + free_sja1000dev(dev); + dev = prev_dev; + + if (!dev) { + /* do that only for first channel */ + if (chan->pciec_card) + peak_pciec_remove(chan->pciec_card); + break; + } + priv = netdev_priv(dev); + chan = priv->priv; + } + + pci_iounmap(pdev, reg_base); + pci_iounmap(pdev, cfg_base); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_driver peak_pci_driver = { + .name = DRV_NAME, + .id_table = peak_pci_tbl, + .probe = peak_pci_probe, + .remove = peak_pci_remove, +}; + +module_pci_driver(peak_pci_driver); |