summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd/amd8111e.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/amd/amd8111e.c')
-rw-r--r--drivers/net/ethernet/amd/amd8111e.c1971
1 files changed, 1971 insertions, 0 deletions
diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
new file mode 100644
index 000000000..94960055f
--- /dev/null
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -0,0 +1,1971 @@
+
+/* Advanced Micro Devices Inc. AMD8111E Linux Network Driver
+ * Copyright (C) 2004 Advanced Micro Devices
+ *
+ *
+ * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
+ * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
+ * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
+ * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.[ pcnet32.c ]
+ * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+
+Module Name:
+
+ amd8111e.c
+
+Abstract:
+
+ AMD8111 based 10/100 Ethernet Controller Driver.
+
+Environment:
+
+ Kernel Mode
+
+Revision History:
+ 3.0.0
+ Initial Revision.
+ 3.0.1
+ 1. Dynamic interrupt coalescing.
+ 2. Removed prev_stats.
+ 3. MII support.
+ 4. Dynamic IPG support
+ 3.0.2 05/29/2003
+ 1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
+ 2. Bug fix: Fixed VLAN support failure.
+ 3. Bug fix: Fixed receive interrupt coalescing bug.
+ 4. Dynamic IPG support is disabled by default.
+ 3.0.3 06/05/2003
+ 1. Bug fix: Fixed failure to close the interface if SMP is enabled.
+ 3.0.4 12/09/2003
+ 1. Added set_mac_address routine for bonding driver support.
+ 2. Tested the driver for bonding support
+ 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
+ indicated to the h/w.
+ 4. Modified amd8111e_rx() routine to receive all the received packets
+ in the first interrupt.
+ 5. Bug fix: Corrected rx_errors reported in get_stats() function.
+ 3.0.5 03/22/2004
+ 1. Added NAPI support
+
+*/
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/ctype.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define AMD8111E_VLAN_TAG_USED 1
+#else
+#define AMD8111E_VLAN_TAG_USED 0
+#endif
+
+#include "amd8111e.h"
+#define MODULE_NAME "amd8111e"
+#define MODULE_VERS "3.0.7"
+MODULE_AUTHOR("Advanced Micro Devices, Inc.");
+MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
+MODULE_LICENSE("GPL");
+module_param_array(speed_duplex, int, NULL, 0);
+MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
+module_param_array(coalesce, bool, NULL, 0);
+MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
+module_param_array(dynamic_ipg, bool, NULL, 0);
+MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
+
+/* This function will read the PHY registers. */
+static int amd8111e_read_phy(struct amd8111e_priv *lp,
+ int phy_id, int reg, u32 *val)
+{
+ void __iomem *mmio = lp->mmio;
+ unsigned int reg_val;
+ unsigned int repeat= REPEAT_CNT;
+
+ reg_val = readl(mmio + PHY_ACCESS);
+ while (reg_val & PHY_CMD_ACTIVE)
+ reg_val = readl( mmio + PHY_ACCESS );
+
+ writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
+ ((reg & 0x1f) << 16), mmio +PHY_ACCESS);
+ do{
+ reg_val = readl(mmio + PHY_ACCESS);
+ udelay(30); /* It takes 30 us to read/write data */
+ } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
+ if(reg_val & PHY_RD_ERR)
+ goto err_phy_read;
+
+ *val = reg_val & 0xffff;
+ return 0;
+err_phy_read:
+ *val = 0;
+ return -EINVAL;
+
+}
+
+/* This function will write into PHY registers. */
+static int amd8111e_write_phy(struct amd8111e_priv *lp,
+ int phy_id, int reg, u32 val)
+{
+ unsigned int repeat = REPEAT_CNT;
+ void __iomem *mmio = lp->mmio;
+ unsigned int reg_val;
+
+ reg_val = readl(mmio + PHY_ACCESS);
+ while (reg_val & PHY_CMD_ACTIVE)
+ reg_val = readl( mmio + PHY_ACCESS );
+
+ writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
+ ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
+
+ do{
+ reg_val = readl(mmio + PHY_ACCESS);
+ udelay(30); /* It takes 30 us to read/write the data */
+ } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
+
+ if(reg_val & PHY_RD_ERR)
+ goto err_phy_write;
+
+ return 0;
+
+err_phy_write:
+ return -EINVAL;
+
+}
+
+/* This is the mii register read function provided to the mii interface. */
+static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ unsigned int reg_val;
+
+ amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
+ return reg_val;
+
+}
+
+/* This is the mii register write function provided to the mii interface. */
+static void amd8111e_mdio_write(struct net_device *dev,
+ int phy_id, int reg_num, int val)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+
+ amd8111e_write_phy(lp, phy_id, reg_num, val);
+}
+
+/* This function will set PHY speed. During initialization sets
+ * the original speed to 100 full
+ */
+static void amd8111e_set_ext_phy(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ u32 bmcr,advert,tmp;
+
+ /* Determine mii register values to set the speed */
+ advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
+ tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ switch (lp->ext_phy_option){
+
+ default:
+ case SPEED_AUTONEG: /* advertise all values */
+ tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
+ ADVERTISE_100HALF|ADVERTISE_100FULL) ;
+ break;
+ case SPEED10_HALF:
+ tmp |= ADVERTISE_10HALF;
+ break;
+ case SPEED10_FULL:
+ tmp |= ADVERTISE_10FULL;
+ break;
+ case SPEED100_HALF:
+ tmp |= ADVERTISE_100HALF;
+ break;
+ case SPEED100_FULL:
+ tmp |= ADVERTISE_100FULL;
+ break;
+ }
+
+ if(advert != tmp)
+ amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
+ /* Restart auto negotiation */
+ bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
+
+}
+
+/* This function will unmap skb->data space and will free
+ * all transmit and receive skbuffs.
+ */
+static int amd8111e_free_skbs(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ struct sk_buff *rx_skbuff;
+ int i;
+
+ /* Freeing transmit skbs */
+ for(i = 0; i < NUM_TX_BUFFERS; i++){
+ if(lp->tx_skbuff[i]){
+ pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
+ dev_kfree_skb (lp->tx_skbuff[i]);
+ lp->tx_skbuff[i] = NULL;
+ lp->tx_dma_addr[i] = 0;
+ }
+ }
+ /* Freeing previously allocated receive buffers */
+ for (i = 0; i < NUM_RX_BUFFERS; i++){
+ rx_skbuff = lp->rx_skbuff[i];
+ if(rx_skbuff != NULL){
+ pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
+ lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(lp->rx_skbuff[i]);
+ lp->rx_skbuff[i] = NULL;
+ lp->rx_dma_addr[i] = 0;
+ }
+ }
+
+ return 0;
+}
+
+/* This will set the receive buffer length corresponding
+ * to the mtu size of networkinterface.
+ */
+static inline void amd8111e_set_rx_buff_len(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ unsigned int mtu = dev->mtu;
+
+ if (mtu > ETH_DATA_LEN){
+ /* MTU + ethernet header + FCS
+ * + optional VLAN tag + skb reserve space 2
+ */
+ lp->rx_buff_len = mtu + ETH_HLEN + 10;
+ lp->options |= OPTION_JUMBO_ENABLE;
+ } else{
+ lp->rx_buff_len = PKT_BUFF_SZ;
+ lp->options &= ~OPTION_JUMBO_ENABLE;
+ }
+}
+
+/* This function will free all the previously allocated buffers,
+ * determine new receive buffer length and will allocate new receive buffers.
+ * This function also allocates and initializes both the transmitter
+ * and receive hardware descriptors.
+ */
+static int amd8111e_init_ring(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int i;
+
+ lp->rx_idx = lp->tx_idx = 0;
+ lp->tx_complete_idx = 0;
+ lp->tx_ring_idx = 0;
+
+
+ if(lp->opened)
+ /* Free previously allocated transmit and receive skbs */
+ amd8111e_free_skbs(dev);
+
+ else{
+ /* allocate the tx and rx descriptors */
+ if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
+ sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
+ &lp->tx_ring_dma_addr)) == NULL)
+
+ goto err_no_mem;
+
+ if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
+ sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
+ &lp->rx_ring_dma_addr)) == NULL)
+
+ goto err_free_tx_ring;
+
+ }
+ /* Set new receive buff size */
+ amd8111e_set_rx_buff_len(dev);
+
+ /* Allocating receive skbs */
+ for (i = 0; i < NUM_RX_BUFFERS; i++) {
+
+ lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len);
+ if (!lp->rx_skbuff[i]) {
+ /* Release previos allocated skbs */
+ for(--i; i >= 0 ;i--)
+ dev_kfree_skb(lp->rx_skbuff[i]);
+ goto err_free_rx_ring;
+ }
+ skb_reserve(lp->rx_skbuff[i],2);
+ }
+ /* Initilaizing receive descriptors */
+ for (i = 0; i < NUM_RX_BUFFERS; i++) {
+ lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
+ lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
+
+ lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
+ lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
+ wmb();
+ lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
+ }
+
+ /* Initializing transmit descriptors */
+ for (i = 0; i < NUM_TX_RING_DR; i++) {
+ lp->tx_ring[i].buff_phy_addr = 0;
+ lp->tx_ring[i].tx_flags = 0;
+ lp->tx_ring[i].buff_count = 0;
+ }
+
+ return 0;
+
+err_free_rx_ring:
+
+ pci_free_consistent(lp->pci_dev,
+ sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
+ lp->rx_ring_dma_addr);
+
+err_free_tx_ring:
+
+ pci_free_consistent(lp->pci_dev,
+ sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
+ lp->tx_ring_dma_addr);
+
+err_no_mem:
+ return -ENOMEM;
+}
+
+/* This function will set the interrupt coalescing according
+ * to the input arguments
+ */
+static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod)
+{
+ unsigned int timeout;
+ unsigned int event_count;
+
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ void __iomem *mmio = lp->mmio;
+ struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
+
+
+ switch(cmod)
+ {
+ case RX_INTR_COAL :
+ timeout = coal_conf->rx_timeout;
+ event_count = coal_conf->rx_event_count;
+ if( timeout > MAX_TIMEOUT ||
+ event_count > MAX_EVENT_COUNT )
+ return -EINVAL;
+
+ timeout = timeout * DELAY_TIMER_CONV;
+ writel(VAL0|STINTEN, mmio+INTEN0);
+ writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
+ mmio+DLY_INT_A);
+ break;
+
+ case TX_INTR_COAL :
+ timeout = coal_conf->tx_timeout;
+ event_count = coal_conf->tx_event_count;
+ if( timeout > MAX_TIMEOUT ||
+ event_count > MAX_EVENT_COUNT )
+ return -EINVAL;
+
+
+ timeout = timeout * DELAY_TIMER_CONV;
+ writel(VAL0|STINTEN,mmio+INTEN0);
+ writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
+ mmio+DLY_INT_B);
+ break;
+
+ case DISABLE_COAL:
+ writel(0,mmio+STVAL);
+ writel(STINTEN, mmio+INTEN0);
+ writel(0, mmio +DLY_INT_B);
+ writel(0, mmio+DLY_INT_A);
+ break;
+ case ENABLE_COAL:
+ /* Start the timer */
+ writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */
+ writel(VAL0|STINTEN, mmio+INTEN0);
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+
+}
+
+/* This function initializes the device registers and starts the device. */
+static int amd8111e_restart(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ void __iomem *mmio = lp->mmio;
+ int i,reg_val;
+
+ /* stop the chip */
+ writel(RUN, mmio + CMD0);
+
+ if(amd8111e_init_ring(dev))
+ return -ENOMEM;
+
+ /* enable the port manager and set auto negotiation always */
+ writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
+ writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
+
+ amd8111e_set_ext_phy(dev);
+
+ /* set control registers */
+ reg_val = readl(mmio + CTRL1);
+ reg_val &= ~XMTSP_MASK;
+ writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
+
+ /* enable interrupt */
+ writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
+ APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
+ SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
+
+ writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
+
+ /* initialize tx and rx ring base addresses */
+ writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
+ writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
+
+ writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
+ writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
+
+ /* set default IPG to 96 */
+ writew((u32)DEFAULT_IPG,mmio+IPG);
+ writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
+
+ if(lp->options & OPTION_JUMBO_ENABLE){
+ writel((u32)VAL2|JUMBO, mmio + CMD3);
+ /* Reset REX_UFLO */
+ writel( REX_UFLO, mmio + CMD2);
+ /* Should not set REX_UFLO for jumbo frames */
+ writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
+ }else{
+ writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
+ writel((u32)JUMBO, mmio + CMD3);
+ }
+
+#if AMD8111E_VLAN_TAG_USED
+ writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
+#endif
+ writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
+
+ /* Setting the MAC address to the device */
+ for (i = 0; i < ETH_ALEN; i++)
+ writeb( dev->dev_addr[i], mmio + PADR + i );
+
+ /* Enable interrupt coalesce */
+ if(lp->options & OPTION_INTR_COAL_ENABLE){
+ netdev_info(dev, "Interrupt Coalescing Enabled.\n");
+ amd8111e_set_coalesce(dev,ENABLE_COAL);
+ }
+
+ /* set RUN bit to start the chip */
+ writel(VAL2 | RDMD0, mmio + CMD0);
+ writel(VAL0 | INTREN | RUN, mmio + CMD0);
+
+ /* To avoid PCI posting bug */
+ readl(mmio+CMD0);
+ return 0;
+}
+
+/* This function clears necessary the device registers. */
+static void amd8111e_init_hw_default(struct amd8111e_priv *lp)
+{
+ unsigned int reg_val;
+ unsigned int logic_filter[2] ={0,};
+ void __iomem *mmio = lp->mmio;
+
+
+ /* stop the chip */
+ writel(RUN, mmio + CMD0);
+
+ /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
+ writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
+
+ /* Clear RCV_RING_BASE_ADDR */
+ writel(0, mmio + RCV_RING_BASE_ADDR0);
+
+ /* Clear XMT_RING_BASE_ADDR */
+ writel(0, mmio + XMT_RING_BASE_ADDR0);
+ writel(0, mmio + XMT_RING_BASE_ADDR1);
+ writel(0, mmio + XMT_RING_BASE_ADDR2);
+ writel(0, mmio + XMT_RING_BASE_ADDR3);
+
+ /* Clear CMD0 */
+ writel(CMD0_CLEAR,mmio + CMD0);
+
+ /* Clear CMD2 */
+ writel(CMD2_CLEAR, mmio +CMD2);
+
+ /* Clear CMD7 */
+ writel(CMD7_CLEAR , mmio + CMD7);
+
+ /* Clear DLY_INT_A and DLY_INT_B */
+ writel(0x0, mmio + DLY_INT_A);
+ writel(0x0, mmio + DLY_INT_B);
+
+ /* Clear FLOW_CONTROL */
+ writel(0x0, mmio + FLOW_CONTROL);
+
+ /* Clear INT0 write 1 to clear register */
+ reg_val = readl(mmio + INT0);
+ writel(reg_val, mmio + INT0);
+
+ /* Clear STVAL */
+ writel(0x0, mmio + STVAL);
+
+ /* Clear INTEN0 */
+ writel( INTEN0_CLEAR, mmio + INTEN0);
+
+ /* Clear LADRF */
+ writel(0x0 , mmio + LADRF);
+
+ /* Set SRAM_SIZE & SRAM_BOUNDARY registers */
+ writel( 0x80010,mmio + SRAM_SIZE);
+
+ /* Clear RCV_RING0_LEN */
+ writel(0x0, mmio + RCV_RING_LEN0);
+
+ /* Clear XMT_RING0/1/2/3_LEN */
+ writel(0x0, mmio + XMT_RING_LEN0);
+ writel(0x0, mmio + XMT_RING_LEN1);
+ writel(0x0, mmio + XMT_RING_LEN2);
+ writel(0x0, mmio + XMT_RING_LEN3);
+
+ /* Clear XMT_RING_LIMIT */
+ writel(0x0, mmio + XMT_RING_LIMIT);
+
+ /* Clear MIB */
+ writew(MIB_CLEAR, mmio + MIB_ADDR);
+
+ /* Clear LARF */
+ amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF);
+
+ /* SRAM_SIZE register */
+ reg_val = readl(mmio + SRAM_SIZE);
+
+ if(lp->options & OPTION_JUMBO_ENABLE)
+ writel( VAL2|JUMBO, mmio + CMD3);
+#if AMD8111E_VLAN_TAG_USED
+ writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
+#endif
+ /* Set default value to CTRL1 Register */
+ writel(CTRL1_DEFAULT, mmio + CTRL1);
+
+ /* To avoid PCI posting bug */
+ readl(mmio + CMD2);
+
+}
+
+/* This function disables the interrupt and clears all the pending
+ * interrupts in INT0
+ */
+static void amd8111e_disable_interrupt(struct amd8111e_priv *lp)
+{
+ u32 intr0;
+
+ /* Disable interrupt */
+ writel(INTREN, lp->mmio + CMD0);
+
+ /* Clear INT0 */
+ intr0 = readl(lp->mmio + INT0);
+ writel(intr0, lp->mmio + INT0);
+
+ /* To avoid PCI posting bug */
+ readl(lp->mmio + INT0);
+
+}
+
+/* This function stops the chip. */
+static void amd8111e_stop_chip(struct amd8111e_priv *lp)
+{
+ writel(RUN, lp->mmio + CMD0);
+
+ /* To avoid PCI posting bug */
+ readl(lp->mmio + CMD0);
+}
+
+/* This function frees the transmiter and receiver descriptor rings. */
+static void amd8111e_free_ring(struct amd8111e_priv *lp)
+{
+ /* Free transmit and receive descriptor rings */
+ if(lp->rx_ring){
+ pci_free_consistent(lp->pci_dev,
+ sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
+ lp->rx_ring, lp->rx_ring_dma_addr);
+ lp->rx_ring = NULL;
+ }
+
+ if(lp->tx_ring){
+ pci_free_consistent(lp->pci_dev,
+ sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
+ lp->tx_ring, lp->tx_ring_dma_addr);
+
+ lp->tx_ring = NULL;
+ }
+
+}
+
+/* This function will free all the transmit skbs that are actually
+ * transmitted by the device. It will check the ownership of the
+ * skb before freeing the skb.
+ */
+static int amd8111e_tx(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
+ int status;
+ /* Complete all the transmit packet */
+ while (lp->tx_complete_idx != lp->tx_idx){
+ tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
+ status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
+
+ if(status & OWN_BIT)
+ break; /* It still hasn't been Txed */
+
+ lp->tx_ring[tx_index].buff_phy_addr = 0;
+
+ /* We must free the original skb */
+ if (lp->tx_skbuff[tx_index]) {
+ pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
+ lp->tx_skbuff[tx_index]->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
+ lp->tx_skbuff[tx_index] = NULL;
+ lp->tx_dma_addr[tx_index] = 0;
+ }
+ lp->tx_complete_idx++;
+ /*COAL update tx coalescing parameters */
+ lp->coal_conf.tx_packets++;
+ lp->coal_conf.tx_bytes +=
+ le16_to_cpu(lp->tx_ring[tx_index].buff_count);
+
+ if (netif_queue_stopped(dev) &&
+ lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
+ /* The ring is no longer full, clear tbusy. */
+ /* lp->tx_full = 0; */
+ netif_wake_queue (dev);
+ }
+ }
+ return 0;
+}
+
+/* This function handles the driver receive operation in polling mode */
+static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
+{
+ struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
+ struct net_device *dev = lp->amd8111e_net_dev;
+ int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
+ void __iomem *mmio = lp->mmio;
+ struct sk_buff *skb,*new_skb;
+ int min_pkt_len, status;
+ unsigned int intr0;
+ int num_rx_pkt = 0;
+ short pkt_len;
+#if AMD8111E_VLAN_TAG_USED
+ short vtag;
+#endif
+ int rx_pkt_limit = budget;
+ unsigned long flags;
+
+ if (rx_pkt_limit <= 0)
+ goto rx_not_empty;
+
+ do{
+ /* process receive packets until we use the quota.
+ * If we own the next entry, it's a new packet. Send it up.
+ */
+ while(1) {
+ status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
+ if (status & OWN_BIT)
+ break;
+
+ /* There is a tricky error noted by John Murphy,
+ * <murf@perftech.com> to Russ Nelson: Even with
+ * full-sized * buffers it's possible for a
+ * jabber packet to use two buffers, with only
+ * the last correctly noting the error.
+ */
+ if(status & ERR_BIT) {
+ /* resetting flags */
+ lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
+ goto err_next_pkt;
+ }
+ /* check for STP and ENP */
+ if(!((status & STP_BIT) && (status & ENP_BIT))){
+ /* resetting flags */
+ lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
+ goto err_next_pkt;
+ }
+ pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
+
+#if AMD8111E_VLAN_TAG_USED
+ vtag = status & TT_MASK;
+ /*MAC will strip vlan tag*/
+ if (vtag != 0)
+ min_pkt_len =MIN_PKT_LEN - 4;
+ else
+#endif
+ min_pkt_len =MIN_PKT_LEN;
+
+ if (pkt_len < min_pkt_len) {
+ lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
+ lp->drv_rx_errors++;
+ goto err_next_pkt;
+ }
+ if(--rx_pkt_limit < 0)
+ goto rx_not_empty;
+ new_skb = netdev_alloc_skb(dev, lp->rx_buff_len);
+ if (!new_skb) {
+ /* if allocation fail,
+ * ignore that pkt and go to next one
+ */
+ lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
+ lp->drv_rx_errors++;
+ goto err_next_pkt;
+ }
+
+ skb_reserve(new_skb, 2);
+ skb = lp->rx_skbuff[rx_index];
+ pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
+ lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
+ skb_put(skb, pkt_len);
+ lp->rx_skbuff[rx_index] = new_skb;
+ lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
+ new_skb->data,
+ lp->rx_buff_len-2,
+ PCI_DMA_FROMDEVICE);
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+#if AMD8111E_VLAN_TAG_USED
+ if (vtag == TT_VLAN_TAGGED){
+ u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info);
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
+ }
+#endif
+ netif_receive_skb(skb);
+ /*COAL update rx coalescing parameters*/
+ lp->coal_conf.rx_packets++;
+ lp->coal_conf.rx_bytes += pkt_len;
+ num_rx_pkt++;
+
+ err_next_pkt:
+ lp->rx_ring[rx_index].buff_phy_addr
+ = cpu_to_le32(lp->rx_dma_addr[rx_index]);
+ lp->rx_ring[rx_index].buff_count =
+ cpu_to_le16(lp->rx_buff_len-2);
+ wmb();
+ lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
+ rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
+ }
+ /* Check the interrupt status register for more packets in the
+ * mean time. Process them since we have not used up our quota.
+ */
+ intr0 = readl(mmio + INT0);
+ /*Ack receive packets */
+ writel(intr0 & RINT0,mmio + INT0);
+
+ } while(intr0 & RINT0);
+
+ if (rx_pkt_limit > 0) {
+ /* Receive descriptor is empty now */
+ spin_lock_irqsave(&lp->lock, flags);
+ __napi_complete(napi);
+ writel(VAL0|RINTEN0, mmio + INTEN0);
+ writel(VAL2 | RDMD0, mmio + CMD0);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+
+rx_not_empty:
+ return num_rx_pkt;
+}
+
+/* This function will indicate the link status to the kernel. */
+static int amd8111e_link_change(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int status0,speed;
+
+ /* read the link change */
+ status0 = readl(lp->mmio + STAT0);
+
+ if(status0 & LINK_STATS){
+ if(status0 & AUTONEG_COMPLETE)
+ lp->link_config.autoneg = AUTONEG_ENABLE;
+ else
+ lp->link_config.autoneg = AUTONEG_DISABLE;
+
+ if(status0 & FULL_DPLX)
+ lp->link_config.duplex = DUPLEX_FULL;
+ else
+ lp->link_config.duplex = DUPLEX_HALF;
+ speed = (status0 & SPEED_MASK) >> 7;
+ if(speed == PHY_SPEED_10)
+ lp->link_config.speed = SPEED_10;
+ else if(speed == PHY_SPEED_100)
+ lp->link_config.speed = SPEED_100;
+
+ netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n",
+ (lp->link_config.speed == SPEED_100) ?
+ "100" : "10",
+ (lp->link_config.duplex == DUPLEX_FULL) ?
+ "Full" : "Half");
+
+ netif_carrier_on(dev);
+ }
+ else{
+ lp->link_config.speed = SPEED_INVALID;
+ lp->link_config.duplex = DUPLEX_INVALID;
+ lp->link_config.autoneg = AUTONEG_INVALID;
+ netdev_info(dev, "Link is Down.\n");
+ netif_carrier_off(dev);
+ }
+
+ return 0;
+}
+
+/* This function reads the mib counters. */
+static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
+{
+ unsigned int status;
+ unsigned int data;
+ unsigned int repeat = REPEAT_CNT;
+
+ writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
+ do {
+ status = readw(mmio + MIB_ADDR);
+ udelay(2); /* controller takes MAX 2 us to get mib data */
+ }
+ while (--repeat && (status & MIB_CMD_ACTIVE));
+
+ data = readl(mmio + MIB_DATA);
+ return data;
+}
+
+/* This function reads the mib registers and returns the hardware statistics.
+ * It updates previous internal driver statistics with new values.
+ */
+static struct net_device_stats *amd8111e_get_stats(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ void __iomem *mmio = lp->mmio;
+ unsigned long flags;
+ struct net_device_stats *new_stats = &dev->stats;
+
+ if (!lp->opened)
+ return new_stats;
+ spin_lock_irqsave (&lp->lock, flags);
+
+ /* stats.rx_packets */
+ new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
+ amd8111e_read_mib(mmio, rcv_multicast_pkts)+
+ amd8111e_read_mib(mmio, rcv_unicast_pkts);
+
+ /* stats.tx_packets */
+ new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
+
+ /*stats.rx_bytes */
+ new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
+
+ /* stats.tx_bytes */
+ new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
+
+ /* stats.rx_errors */
+ /* hw errors + errors driver reported */
+ new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
+ amd8111e_read_mib(mmio, rcv_fragments)+
+ amd8111e_read_mib(mmio, rcv_jabbers)+
+ amd8111e_read_mib(mmio, rcv_alignment_errors)+
+ amd8111e_read_mib(mmio, rcv_fcs_errors)+
+ amd8111e_read_mib(mmio, rcv_miss_pkts)+
+ lp->drv_rx_errors;
+
+ /* stats.tx_errors */
+ new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
+
+ /* stats.rx_dropped*/
+ new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
+
+ /* stats.tx_dropped*/
+ new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts);
+
+ /* stats.multicast*/
+ new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
+
+ /* stats.collisions*/
+ new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
+
+ /* stats.rx_length_errors*/
+ new_stats->rx_length_errors =
+ amd8111e_read_mib(mmio, rcv_undersize_pkts)+
+ amd8111e_read_mib(mmio, rcv_oversize_pkts);
+
+ /* stats.rx_over_errors*/
+ new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
+
+ /* stats.rx_crc_errors*/
+ new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
+
+ /* stats.rx_frame_errors*/
+ new_stats->rx_frame_errors =
+ amd8111e_read_mib(mmio, rcv_alignment_errors);
+
+ /* stats.rx_fifo_errors */
+ new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
+
+ /* stats.rx_missed_errors */
+ new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
+
+ /* stats.tx_aborted_errors*/
+ new_stats->tx_aborted_errors =
+ amd8111e_read_mib(mmio, xmt_excessive_collision);
+
+ /* stats.tx_carrier_errors*/
+ new_stats->tx_carrier_errors =
+ amd8111e_read_mib(mmio, xmt_loss_carrier);
+
+ /* stats.tx_fifo_errors*/
+ new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
+
+ /* stats.tx_window_errors*/
+ new_stats->tx_window_errors =
+ amd8111e_read_mib(mmio, xmt_late_collision);
+
+ /* Reset the mibs for collecting new statistics */
+ /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
+
+ spin_unlock_irqrestore (&lp->lock, flags);
+
+ return new_stats;
+}
+
+/* This function recalculate the interrupt coalescing mode on every interrupt
+ * according to the datarate and the packet rate.
+ */
+static int amd8111e_calc_coalesce(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
+ int tx_pkt_rate;
+ int rx_pkt_rate;
+ int tx_data_rate;
+ int rx_data_rate;
+ int rx_pkt_size;
+ int tx_pkt_size;
+
+ tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
+ coal_conf->tx_prev_packets = coal_conf->tx_packets;
+
+ tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
+ coal_conf->tx_prev_bytes = coal_conf->tx_bytes;
+
+ rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
+ coal_conf->rx_prev_packets = coal_conf->rx_packets;
+
+ rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
+ coal_conf->rx_prev_bytes = coal_conf->rx_bytes;
+
+ if(rx_pkt_rate < 800){
+ if(coal_conf->rx_coal_type != NO_COALESCE){
+
+ coal_conf->rx_timeout = 0x0;
+ coal_conf->rx_event_count = 0;
+ amd8111e_set_coalesce(dev,RX_INTR_COAL);
+ coal_conf->rx_coal_type = NO_COALESCE;
+ }
+ }
+ else{
+
+ rx_pkt_size = rx_data_rate/rx_pkt_rate;
+ if (rx_pkt_size < 128){
+ if(coal_conf->rx_coal_type != NO_COALESCE){
+
+ coal_conf->rx_timeout = 0;
+ coal_conf->rx_event_count = 0;
+ amd8111e_set_coalesce(dev,RX_INTR_COAL);
+ coal_conf->rx_coal_type = NO_COALESCE;
+ }
+
+ }
+ else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
+
+ if(coal_conf->rx_coal_type != LOW_COALESCE){
+ coal_conf->rx_timeout = 1;
+ coal_conf->rx_event_count = 4;
+ amd8111e_set_coalesce(dev,RX_INTR_COAL);
+ coal_conf->rx_coal_type = LOW_COALESCE;
+ }
+ }
+ else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
+
+ if(coal_conf->rx_coal_type != MEDIUM_COALESCE){
+ coal_conf->rx_timeout = 1;
+ coal_conf->rx_event_count = 4;
+ amd8111e_set_coalesce(dev,RX_INTR_COAL);
+ coal_conf->rx_coal_type = MEDIUM_COALESCE;
+ }
+
+ }
+ else if(rx_pkt_size >= 1024){
+ if(coal_conf->rx_coal_type != HIGH_COALESCE){
+ coal_conf->rx_timeout = 2;
+ coal_conf->rx_event_count = 3;
+ amd8111e_set_coalesce(dev,RX_INTR_COAL);
+ coal_conf->rx_coal_type = HIGH_COALESCE;
+ }
+ }
+ }
+ /* NOW FOR TX INTR COALESC */
+ if(tx_pkt_rate < 800){
+ if(coal_conf->tx_coal_type != NO_COALESCE){
+
+ coal_conf->tx_timeout = 0x0;
+ coal_conf->tx_event_count = 0;
+ amd8111e_set_coalesce(dev,TX_INTR_COAL);
+ coal_conf->tx_coal_type = NO_COALESCE;
+ }
+ }
+ else{
+
+ tx_pkt_size = tx_data_rate/tx_pkt_rate;
+ if (tx_pkt_size < 128){
+
+ if(coal_conf->tx_coal_type != NO_COALESCE){
+
+ coal_conf->tx_timeout = 0;
+ coal_conf->tx_event_count = 0;
+ amd8111e_set_coalesce(dev,TX_INTR_COAL);
+ coal_conf->tx_coal_type = NO_COALESCE;
+ }
+
+ }
+ else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
+
+ if(coal_conf->tx_coal_type != LOW_COALESCE){
+ coal_conf->tx_timeout = 1;
+ coal_conf->tx_event_count = 2;
+ amd8111e_set_coalesce(dev,TX_INTR_COAL);
+ coal_conf->tx_coal_type = LOW_COALESCE;
+
+ }
+ }
+ else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
+
+ if(coal_conf->tx_coal_type != MEDIUM_COALESCE){
+ coal_conf->tx_timeout = 2;
+ coal_conf->tx_event_count = 5;
+ amd8111e_set_coalesce(dev,TX_INTR_COAL);
+ coal_conf->tx_coal_type = MEDIUM_COALESCE;
+ }
+
+ }
+ else if(tx_pkt_size >= 1024){
+ if (tx_pkt_size >= 1024){
+ if(coal_conf->tx_coal_type != HIGH_COALESCE){
+ coal_conf->tx_timeout = 4;
+ coal_conf->tx_event_count = 8;
+ amd8111e_set_coalesce(dev,TX_INTR_COAL);
+ coal_conf->tx_coal_type = HIGH_COALESCE;
+ }
+ }
+ }
+ }
+ return 0;
+
+}
+
+/* This is device interrupt function. It handles transmit,
+ * receive,link change and hardware timer interrupts.
+ */
+static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
+{
+
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ void __iomem *mmio = lp->mmio;
+ unsigned int intr0, intren0;
+ unsigned int handled = 1;
+
+ if(unlikely(dev == NULL))
+ return IRQ_NONE;
+
+ spin_lock(&lp->lock);
+
+ /* disabling interrupt */
+ writel(INTREN, mmio + CMD0);
+
+ /* Read interrupt status */
+ intr0 = readl(mmio + INT0);
+ intren0 = readl(mmio + INTEN0);
+
+ /* Process all the INT event until INTR bit is clear. */
+
+ if (!(intr0 & INTR)){
+ handled = 0;
+ goto err_no_interrupt;
+ }
+
+ /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
+ writel(intr0, mmio + INT0);
+
+ /* Check if Receive Interrupt has occurred. */
+ if (intr0 & RINT0) {
+ if (napi_schedule_prep(&lp->napi)) {
+ /* Disable receive interupts */
+ writel(RINTEN0, mmio + INTEN0);
+ /* Schedule a polling routine */
+ __napi_schedule(&lp->napi);
+ } else if (intren0 & RINTEN0) {
+ netdev_dbg(dev, "************Driver bug! interrupt while in poll\n");
+ /* Fix by disable receive interrupts */
+ writel(RINTEN0, mmio + INTEN0);
+ }
+ }
+
+ /* Check if Transmit Interrupt has occurred. */
+ if (intr0 & TINT0)
+ amd8111e_tx(dev);
+
+ /* Check if Link Change Interrupt has occurred. */
+ if (intr0 & LCINT)
+ amd8111e_link_change(dev);
+
+ /* Check if Hardware Timer Interrupt has occurred. */
+ if (intr0 & STINT)
+ amd8111e_calc_coalesce(dev);
+
+err_no_interrupt:
+ writel( VAL0 | INTREN,mmio + CMD0);
+
+ spin_unlock(&lp->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void amd8111e_poll(struct net_device *dev)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ amd8111e_interrupt(0, dev);
+ local_irq_restore(flags);
+}
+#endif
+
+
+/* This function closes the network interface and updates
+ * the statistics so that most recent statistics will be
+ * available after the interface is down.
+ */
+static int amd8111e_close(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ netif_stop_queue(dev);
+
+ napi_disable(&lp->napi);
+
+ spin_lock_irq(&lp->lock);
+
+ amd8111e_disable_interrupt(lp);
+ amd8111e_stop_chip(lp);
+
+ /* Free transmit and receive skbs */
+ amd8111e_free_skbs(lp->amd8111e_net_dev);
+
+ netif_carrier_off(lp->amd8111e_net_dev);
+
+ /* Delete ipg timer */
+ if(lp->options & OPTION_DYN_IPG_ENABLE)
+ del_timer_sync(&lp->ipg_data.ipg_timer);
+
+ spin_unlock_irq(&lp->lock);
+ free_irq(dev->irq, dev);
+ amd8111e_free_ring(lp);
+
+ /* Update the statistics before closing */
+ amd8111e_get_stats(dev);
+ lp->opened = 0;
+ return 0;
+}
+
+/* This function opens new interface.It requests irq for the device,
+ * initializes the device,buffers and descriptors, and starts the device.
+ */
+static int amd8111e_open(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+
+ if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
+ dev->name, dev))
+ return -EAGAIN;
+
+ napi_enable(&lp->napi);
+
+ spin_lock_irq(&lp->lock);
+
+ amd8111e_init_hw_default(lp);
+
+ if(amd8111e_restart(dev)){
+ spin_unlock_irq(&lp->lock);
+ napi_disable(&lp->napi);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ return -ENOMEM;
+ }
+ /* Start ipg timer */
+ if(lp->options & OPTION_DYN_IPG_ENABLE){
+ add_timer(&lp->ipg_data.ipg_timer);
+ netdev_info(dev, "Dynamic IPG Enabled\n");
+ }
+
+ lp->opened = 1;
+
+ spin_unlock_irq(&lp->lock);
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* This function checks if there is any transmit descriptors
+ * available to queue more packet.
+ */
+static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp)
+{
+ int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
+ if (lp->tx_skbuff[tx_index])
+ return -1;
+ else
+ return 0;
+
+}
+
+/* This function will queue the transmit packets to the
+ * descriptors and will trigger the send operation. It also
+ * initializes the transmit descriptors with buffer physical address,
+ * byte count, ownership to hardware etc.
+ */
+static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int tx_index;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
+
+ lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
+
+ lp->tx_skbuff[tx_index] = skb;
+ lp->tx_ring[tx_index].tx_flags = 0;
+
+#if AMD8111E_VLAN_TAG_USED
+ if (skb_vlan_tag_present(skb)) {
+ lp->tx_ring[tx_index].tag_ctrl_cmd |=
+ cpu_to_le16(TCC_VLAN_INSERT);
+ lp->tx_ring[tx_index].tag_ctrl_info =
+ cpu_to_le16(skb_vlan_tag_get(skb));
+
+ }
+#endif
+ lp->tx_dma_addr[tx_index] =
+ pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
+ lp->tx_ring[tx_index].buff_phy_addr =
+ cpu_to_le32(lp->tx_dma_addr[tx_index]);
+
+ /* Set FCS and LTINT bits */
+ wmb();
+ lp->tx_ring[tx_index].tx_flags |=
+ cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
+
+ lp->tx_idx++;
+
+ /* Trigger an immediate send poll. */
+ writel( VAL1 | TDMD0, lp->mmio + CMD0);
+ writel( VAL2 | RDMD0,lp->mmio + CMD0);
+
+ if(amd8111e_tx_queue_avail(lp) < 0){
+ netif_stop_queue(dev);
+ }
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return NETDEV_TX_OK;
+}
+/* This function returns all the memory mapped registers of the device. */
+static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
+{
+ void __iomem *mmio = lp->mmio;
+ /* Read only necessary registers */
+ buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
+ buf[1] = readl(mmio + XMT_RING_LEN0);
+ buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
+ buf[3] = readl(mmio + RCV_RING_LEN0);
+ buf[4] = readl(mmio + CMD0);
+ buf[5] = readl(mmio + CMD2);
+ buf[6] = readl(mmio + CMD3);
+ buf[7] = readl(mmio + CMD7);
+ buf[8] = readl(mmio + INT0);
+ buf[9] = readl(mmio + INTEN0);
+ buf[10] = readl(mmio + LADRF);
+ buf[11] = readl(mmio + LADRF+4);
+ buf[12] = readl(mmio + STAT0);
+}
+
+
+/* This function sets promiscuos mode, all-multi mode or the multicast address
+ * list to the device.
+ */
+static void amd8111e_set_multicast_list(struct net_device *dev)
+{
+ struct netdev_hw_addr *ha;
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ u32 mc_filter[2] ;
+ int bit_num;
+
+ if(dev->flags & IFF_PROMISC){
+ writel( VAL2 | PROM, lp->mmio + CMD2);
+ return;
+ }
+ else
+ writel( PROM, lp->mmio + CMD2);
+ if (dev->flags & IFF_ALLMULTI ||
+ netdev_mc_count(dev) > MAX_FILTER_SIZE) {
+ /* get all multicast packet */
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ lp->options |= OPTION_MULTICAST_ENABLE;
+ amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
+ return;
+ }
+ if (netdev_mc_empty(dev)) {
+ /* get only own packets */
+ mc_filter[1] = mc_filter[0] = 0;
+ lp->options &= ~OPTION_MULTICAST_ENABLE;
+ amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
+ /* disable promiscuous mode */
+ writel(PROM, lp->mmio + CMD2);
+ return;
+ }
+ /* load all the multicast addresses in the logic filter */
+ lp->options |= OPTION_MULTICAST_ENABLE;
+ mc_filter[1] = mc_filter[0] = 0;
+ netdev_for_each_mc_addr(ha, dev) {
+ bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
+ mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
+ }
+ amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
+
+ /* To eliminate PCI posting bug */
+ readl(lp->mmio + CMD2);
+
+}
+
+static void amd8111e_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ struct pci_dev *pci_dev = lp->pci_dev;
+ strlcpy(info->driver, MODULE_NAME, sizeof(info->driver));
+ strlcpy(info->version, MODULE_VERS, sizeof(info->version));
+ snprintf(info->fw_version, sizeof(info->fw_version),
+ "%u", chip_version);
+ strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info));
+}
+
+static int amd8111e_get_regs_len(struct net_device *dev)
+{
+ return AMD8111E_REG_DUMP_LEN;
+}
+
+static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ regs->version = 0;
+ amd8111e_read_regs(lp, buf);
+}
+
+static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ spin_lock_irq(&lp->lock);
+ mii_ethtool_gset(&lp->mii_if, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return 0;
+}
+
+static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int res;
+ spin_lock_irq(&lp->lock);
+ res = mii_ethtool_sset(&lp->mii_if, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return res;
+}
+
+static int amd8111e_nway_reset(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ return mii_nway_restart(&lp->mii_if);
+}
+
+static u32 amd8111e_get_link(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ return mii_link_ok(&lp->mii_if);
+}
+
+static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ wol_info->supported = WAKE_MAGIC|WAKE_PHY;
+ if (lp->options & OPTION_WOL_ENABLE)
+ wol_info->wolopts = WAKE_MAGIC;
+}
+
+static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
+ return -EINVAL;
+ spin_lock_irq(&lp->lock);
+ if (wol_info->wolopts & WAKE_MAGIC)
+ lp->options |=
+ (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
+ else if(wol_info->wolopts & WAKE_PHY)
+ lp->options |=
+ (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
+ else
+ lp->options &= ~OPTION_WOL_ENABLE;
+ spin_unlock_irq(&lp->lock);
+ return 0;
+}
+
+static const struct ethtool_ops ops = {
+ .get_drvinfo = amd8111e_get_drvinfo,
+ .get_regs_len = amd8111e_get_regs_len,
+ .get_regs = amd8111e_get_regs,
+ .get_settings = amd8111e_get_settings,
+ .set_settings = amd8111e_set_settings,
+ .nway_reset = amd8111e_nway_reset,
+ .get_link = amd8111e_get_link,
+ .get_wol = amd8111e_get_wol,
+ .set_wol = amd8111e_set_wol,
+};
+
+/* This function handles all the ethtool ioctls. It gives driver info,
+ * gets/sets driver speed, gets memory mapped register values, forces
+ * auto negotiation, sets/gets WOL options for ethtool application.
+ */
+static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = if_mii(ifr);
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int err;
+ u32 mii_regval;
+
+ switch(cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = lp->ext_phy_addr;
+
+ /* fallthru */
+ case SIOCGMIIREG:
+
+ spin_lock_irq(&lp->lock);
+ err = amd8111e_read_phy(lp, data->phy_id,
+ data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
+ spin_unlock_irq(&lp->lock);
+
+ data->val_out = mii_regval;
+ return err;
+
+ case SIOCSMIIREG:
+
+ spin_lock_irq(&lp->lock);
+ err = amd8111e_write_phy(lp, data->phy_id,
+ data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
+ spin_unlock_irq(&lp->lock);
+
+ return err;
+
+ default:
+ /* do nothing */
+ break;
+ }
+ return -EOPNOTSUPP;
+}
+static int amd8111e_set_mac_address(struct net_device *dev, void *p)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int i;
+ struct sockaddr *addr = p;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ spin_lock_irq(&lp->lock);
+ /* Setting the MAC address to the device */
+ for (i = 0; i < ETH_ALEN; i++)
+ writeb( dev->dev_addr[i], lp->mmio + PADR + i );
+
+ spin_unlock_irq(&lp->lock);
+
+ return 0;
+}
+
+/* This function changes the mtu of the device. It restarts the device to
+ * initialize the descriptor with new receive buffers.
+ */
+static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int err;
+
+ if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
+ return -EINVAL;
+
+ if (!netif_running(dev)) {
+ /* new_mtu will be used
+ * when device starts netxt time
+ */
+ dev->mtu = new_mtu;
+ return 0;
+ }
+
+ spin_lock_irq(&lp->lock);
+
+ /* stop the chip */
+ writel(RUN, lp->mmio + CMD0);
+
+ dev->mtu = new_mtu;
+
+ err = amd8111e_restart(dev);
+ spin_unlock_irq(&lp->lock);
+ if(!err)
+ netif_start_queue(dev);
+ return err;
+}
+
+static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp)
+{
+ writel( VAL1|MPPLBA, lp->mmio + CMD3);
+ writel( VAL0|MPEN_SW, lp->mmio + CMD7);
+
+ /* To eliminate PCI posting bug */
+ readl(lp->mmio + CMD7);
+ return 0;
+}
+
+static int amd8111e_enable_link_change(struct amd8111e_priv *lp)
+{
+
+ /* Adapter is already stoped/suspended/interrupt-disabled */
+ writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
+
+ /* To eliminate PCI posting bug */
+ readl(lp->mmio + CMD7);
+ return 0;
+}
+
+/* This function is called when a packet transmission fails to complete
+ * within a reasonable period, on the assumption that an interrupt have
+ * failed or the interface is locked up. This function will reinitialize
+ * the hardware.
+ */
+static void amd8111e_tx_timeout(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int err;
+
+ netdev_err(dev, "transmit timed out, resetting\n");
+
+ spin_lock_irq(&lp->lock);
+ err = amd8111e_restart(dev);
+ spin_unlock_irq(&lp->lock);
+ if(!err)
+ netif_wake_queue(dev);
+}
+static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pci_dev);
+ struct amd8111e_priv *lp = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ /* disable the interrupt */
+ spin_lock_irq(&lp->lock);
+ amd8111e_disable_interrupt(lp);
+ spin_unlock_irq(&lp->lock);
+
+ netif_device_detach(dev);
+
+ /* stop chip */
+ spin_lock_irq(&lp->lock);
+ if(lp->options & OPTION_DYN_IPG_ENABLE)
+ del_timer_sync(&lp->ipg_data.ipg_timer);
+ amd8111e_stop_chip(lp);
+ spin_unlock_irq(&lp->lock);
+
+ if(lp->options & OPTION_WOL_ENABLE){
+ /* enable wol */
+ if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
+ amd8111e_enable_magicpkt(lp);
+ if(lp->options & OPTION_WAKE_PHY_ENABLE)
+ amd8111e_enable_link_change(lp);
+
+ pci_enable_wake(pci_dev, PCI_D3hot, 1);
+ pci_enable_wake(pci_dev, PCI_D3cold, 1);
+
+ }
+ else{
+ pci_enable_wake(pci_dev, PCI_D3hot, 0);
+ pci_enable_wake(pci_dev, PCI_D3cold, 0);
+ }
+
+ pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, PCI_D3hot);
+
+ return 0;
+}
+static int amd8111e_resume(struct pci_dev *pci_dev)
+{
+ struct net_device *dev = pci_get_drvdata(pci_dev);
+ struct amd8111e_priv *lp = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
+
+ pci_enable_wake(pci_dev, PCI_D3hot, 0);
+ pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
+
+ netif_device_attach(dev);
+
+ spin_lock_irq(&lp->lock);
+ amd8111e_restart(dev);
+ /* Restart ipg timer */
+ if(lp->options & OPTION_DYN_IPG_ENABLE)
+ mod_timer(&lp->ipg_data.ipg_timer,
+ jiffies + IPG_CONVERGE_JIFFIES);
+ spin_unlock_irq(&lp->lock);
+
+ return 0;
+}
+
+static void amd8111e_config_ipg(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ struct ipg_info *ipg_data = &lp->ipg_data;
+ void __iomem *mmio = lp->mmio;
+ unsigned int prev_col_cnt = ipg_data->col_cnt;
+ unsigned int total_col_cnt;
+ unsigned int tmp_ipg;
+
+ if(lp->link_config.duplex == DUPLEX_FULL){
+ ipg_data->ipg = DEFAULT_IPG;
+ return;
+ }
+
+ if(ipg_data->ipg_state == SSTATE){
+
+ if(ipg_data->timer_tick == IPG_STABLE_TIME){
+
+ ipg_data->timer_tick = 0;
+ ipg_data->ipg = MIN_IPG - IPG_STEP;
+ ipg_data->current_ipg = MIN_IPG;
+ ipg_data->diff_col_cnt = 0xFFFFFFFF;
+ ipg_data->ipg_state = CSTATE;
+ }
+ else
+ ipg_data->timer_tick++;
+ }
+
+ if(ipg_data->ipg_state == CSTATE){
+
+ /* Get the current collision count */
+
+ total_col_cnt = ipg_data->col_cnt =
+ amd8111e_read_mib(mmio, xmt_collisions);
+
+ if ((total_col_cnt - prev_col_cnt) <
+ (ipg_data->diff_col_cnt)){
+
+ ipg_data->diff_col_cnt =
+ total_col_cnt - prev_col_cnt ;
+
+ ipg_data->ipg = ipg_data->current_ipg;
+ }
+
+ ipg_data->current_ipg += IPG_STEP;
+
+ if (ipg_data->current_ipg <= MAX_IPG)
+ tmp_ipg = ipg_data->current_ipg;
+ else{
+ tmp_ipg = ipg_data->ipg;
+ ipg_data->ipg_state = SSTATE;
+ }
+ writew((u32)tmp_ipg, mmio + IPG);
+ writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
+ }
+ mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
+ return;
+
+}
+
+static void amd8111e_probe_ext_phy(struct net_device *dev)
+{
+ struct amd8111e_priv *lp = netdev_priv(dev);
+ int i;
+
+ for (i = 0x1e; i >= 0; i--) {
+ u32 id1, id2;
+
+ if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
+ continue;
+ if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
+ continue;
+ lp->ext_phy_id = (id1 << 16) | id2;
+ lp->ext_phy_addr = i;
+ return;
+ }
+ lp->ext_phy_id = 0;
+ lp->ext_phy_addr = 1;
+}
+
+static const struct net_device_ops amd8111e_netdev_ops = {
+ .ndo_open = amd8111e_open,
+ .ndo_stop = amd8111e_close,
+ .ndo_start_xmit = amd8111e_start_xmit,
+ .ndo_tx_timeout = amd8111e_tx_timeout,
+ .ndo_get_stats = amd8111e_get_stats,
+ .ndo_set_rx_mode = amd8111e_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = amd8111e_set_mac_address,
+ .ndo_do_ioctl = amd8111e_ioctl,
+ .ndo_change_mtu = amd8111e_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = amd8111e_poll,
+#endif
+};
+
+static int amd8111e_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err, i;
+ unsigned long reg_addr,reg_len;
+ struct amd8111e_priv *lp;
+ struct net_device *dev;
+
+ err = pci_enable_device(pdev);
+ if(err){
+ dev_err(&pdev->dev, "Cannot enable new PCI device\n");
+ return err;
+ }
+
+ if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
+ dev_err(&pdev->dev, "Cannot find PCI base address\n");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ err = pci_request_regions(pdev, MODULE_NAME);
+ if(err){
+ dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
+ goto err_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ /* Find power-management capability. */
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, "No Power Management capability\n");
+ err = -ENODEV;
+ goto err_free_reg;
+ }
+
+ /* Initialize DMA */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
+ dev_err(&pdev->dev, "DMA not supported\n");
+ err = -ENODEV;
+ goto err_free_reg;
+ }
+
+ reg_addr = pci_resource_start(pdev, 0);
+ reg_len = pci_resource_len(pdev, 0);
+
+ dev = alloc_etherdev(sizeof(struct amd8111e_priv));
+ if (!dev) {
+ err = -ENOMEM;
+ goto err_free_reg;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+#if AMD8111E_VLAN_TAG_USED
+ dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ;
+#endif
+
+ lp = netdev_priv(dev);
+ lp->pci_dev = pdev;
+ lp->amd8111e_net_dev = dev;
+ lp->pm_cap = pdev->pm_cap;
+
+ spin_lock_init(&lp->lock);
+
+ lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len);
+ if (!lp->mmio) {
+ dev_err(&pdev->dev, "Cannot map device registers\n");
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ /* Initializing MAC address */
+ for (i = 0; i < ETH_ALEN; i++)
+ dev->dev_addr[i] = readb(lp->mmio + PADR + i);
+
+ /* Setting user defined parametrs */
+ lp->ext_phy_option = speed_duplex[card_idx];
+ if(coalesce[card_idx])
+ lp->options |= OPTION_INTR_COAL_ENABLE;
+ if(dynamic_ipg[card_idx++])
+ lp->options |= OPTION_DYN_IPG_ENABLE;
+
+
+ /* Initialize driver entry points */
+ dev->netdev_ops = &amd8111e_netdev_ops;
+ dev->ethtool_ops = &ops;
+ dev->irq =pdev->irq;
+ dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
+ netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
+
+#if AMD8111E_VLAN_TAG_USED
+ dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+#endif
+ /* Probe the external PHY */
+ amd8111e_probe_ext_phy(dev);
+
+ /* setting mii default values */
+ lp->mii_if.dev = dev;
+ lp->mii_if.mdio_read = amd8111e_mdio_read;
+ lp->mii_if.mdio_write = amd8111e_mdio_write;
+ lp->mii_if.phy_id = lp->ext_phy_addr;
+
+ /* Set receive buffer length and set jumbo option*/
+ amd8111e_set_rx_buff_len(dev);
+
+
+ err = register_netdev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot register net device\n");
+ goto err_free_dev;
+ }
+
+ pci_set_drvdata(pdev, dev);
+
+ /* Initialize software ipg timer */
+ if(lp->options & OPTION_DYN_IPG_ENABLE){
+ init_timer(&lp->ipg_data.ipg_timer);
+ lp->ipg_data.ipg_timer.data = (unsigned long) dev;
+ lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
+ lp->ipg_data.ipg_timer.expires = jiffies +
+ IPG_CONVERGE_JIFFIES;
+ lp->ipg_data.ipg = DEFAULT_IPG;
+ lp->ipg_data.ipg_state = CSTATE;
+ }
+
+ /* display driver and device information */
+ chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
+ dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS);
+ dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
+ chip_version, dev->dev_addr);
+ if (lp->ext_phy_id)
+ dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n",
+ lp->ext_phy_id, lp->ext_phy_addr);
+ else
+ dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n");
+
+ return 0;
+
+err_free_dev:
+ free_netdev(dev);
+
+err_free_reg:
+ pci_release_regions(pdev);
+
+err_disable_pdev:
+ pci_disable_device(pdev);
+ return err;
+
+}
+
+static void amd8111e_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev) {
+ unregister_netdev(dev);
+ free_netdev(dev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ }
+}
+
+static const struct pci_device_id amd8111e_pci_tbl[] = {
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD8111E_7462,
+ },
+ {
+ .vendor = 0,
+ }
+};
+MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
+
+static struct pci_driver amd8111e_driver = {
+ .name = MODULE_NAME,
+ .id_table = amd8111e_pci_tbl,
+ .probe = amd8111e_probe_one,
+ .remove = amd8111e_remove_one,
+ .suspend = amd8111e_suspend,
+ .resume = amd8111e_resume
+};
+
+module_pci_driver(amd8111e_driver);
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-05 20:49:45 +0000