summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/fujitsu
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/fujitsu')
-rw-r--r--drivers/net/ethernet/fujitsu/Kconfig31
-rw-r--r--drivers/net/ethernet/fujitsu/Makefile5
-rw-r--r--drivers/net/ethernet/fujitsu/fmvj18x_cs.c1172
3 files changed, 1208 insertions, 0 deletions
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
new file mode 100644
index 000000000..108525738
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -0,0 +1,31 @@
+#
+# Fujitsu Network device configuration
+#
+
+config NET_VENDOR_FUJITSU
+ bool "Fujitsu devices"
+ default y
+ depends on PCMCIA
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ the questions about Fujitsu cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_FUJITSU
+
+config PCMCIA_FMVJ18X
+ tristate "Fujitsu FMV-J18x PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ ---help---
+ Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+ PCMCIA (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called fmvj18x_cs. If unsure, say N.
+
+endif # NET_VENDOR_FUJITSU
diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile
new file mode 100644
index 000000000..21561fdcc
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Fujitsu network device drivers.
+#
+
+obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
new file mode 100644
index 000000000..a7139f588
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -0,0 +1,1172 @@
+/*======================================================================
+ fmvj18x_cs.c 2.8 2002/03/23
+
+ A fmvj18x (and its compatibles) PCMCIA client driver
+
+ Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
+
+ TDK LAK-CD021 and CONTEC C-NET(PC)C support added by
+ Nobuhiro Katayama, kata-n@po.iijnet.or.jp
+
+ The PCMCIA client code is based on code written by David Hinds.
+ Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
+ but is actually largely Donald Becker's AT1700 driver, which
+ carries the following attribution:
+
+ Written 1993-94 by Donald Becker.
+
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+======================================================================*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME "fmvj18x_cs"
+#define DRV_VERSION "2.9"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* SRAM configuration */
+/* 0:4KB*2 TX buffer else:8KB*2 TX buffer */
+INT_MODULE_PARM(sram_config, 0);
+
+
+/*====================================================================*/
+/*
+ PCMCIA event handlers
+ */
+static int fmvj18x_config(struct pcmcia_device *link);
+static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
+static int fmvj18x_setup_mfc(struct pcmcia_device *link);
+static void fmvj18x_release(struct pcmcia_device *link);
+static void fmvj18x_detach(struct pcmcia_device *p_dev);
+
+/*
+ LAN controller(MBH86960A) specific routines
+ */
+static int fjn_config(struct net_device *dev, struct ifmap *map);
+static int fjn_open(struct net_device *dev);
+static int fjn_close(struct net_device *dev);
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t fjn_interrupt(int irq, void *dev_id);
+static void fjn_rx(struct net_device *dev);
+static void fjn_reset(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void fjn_tx_timeout(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+/*
+ card type
+ */
+enum cardtype { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
+ XXX10304, NEC, KME
+};
+
+/*
+ driver specific data structure
+*/
+struct local_info {
+ struct pcmcia_device *p_dev;
+ long open_time;
+ uint tx_started:1;
+ uint tx_queue;
+ u_short tx_queue_len;
+ enum cardtype cardtype;
+ u_short sent;
+ u_char __iomem *base;
+};
+
+#define MC_FILTERBREAK 64
+
+/*====================================================================*/
+/*
+ ioport offset from the base address
+ */
+#define TX_STATUS 0 /* transmit status register */
+#define RX_STATUS 1 /* receive status register */
+#define TX_INTR 2 /* transmit interrupt mask register */
+#define RX_INTR 3 /* receive interrupt mask register */
+#define TX_MODE 4 /* transmit mode register */
+#define RX_MODE 5 /* receive mode register */
+#define CONFIG_0 6 /* configuration register 0 */
+#define CONFIG_1 7 /* configuration register 1 */
+
+#define NODE_ID 8 /* node ID register (bank 0) */
+#define MAR_ADR 8 /* multicast address registers (bank 1) */
+
+#define DATAPORT 8 /* buffer mem port registers (bank 2) */
+#define TX_START 10 /* transmit start register */
+#define COL_CTRL 11 /* 16 collision control register */
+#define BMPR12 12 /* reserved */
+#define BMPR13 13 /* reserved */
+#define RX_SKIP 14 /* skip received packet register */
+
+#define LAN_CTRL 16 /* LAN card control register */
+
+#define MAC_ID 0x1a /* hardware address */
+#define UNGERMANN_MAC_ID 0x18 /* UNGERMANN-BASS hardware address */
+
+/*
+ control bits
+ */
+#define ENA_TMT_OK 0x80
+#define ENA_TMT_REC 0x20
+#define ENA_COL 0x04
+#define ENA_16_COL 0x02
+#define ENA_TBUS_ERR 0x01
+
+#define ENA_PKT_RDY 0x80
+#define ENA_BUS_ERR 0x40
+#define ENA_LEN_ERR 0x08
+#define ENA_ALG_ERR 0x04
+#define ENA_CRC_ERR 0x02
+#define ENA_OVR_FLO 0x01
+
+/* flags */
+#define F_TMT_RDY 0x80 /* can accept new packet */
+#define F_NET_BSY 0x40 /* carrier is detected */
+#define F_TMT_OK 0x20 /* send packet successfully */
+#define F_SRT_PKT 0x10 /* short packet error */
+#define F_COL_ERR 0x04 /* collision error */
+#define F_16_COL 0x02 /* 16 collision error */
+#define F_TBUS_ERR 0x01 /* bus read error */
+
+#define F_PKT_RDY 0x80 /* packet(s) in buffer */
+#define F_BUS_ERR 0x40 /* bus read error */
+#define F_LEN_ERR 0x08 /* short packet */
+#define F_ALG_ERR 0x04 /* frame error */
+#define F_CRC_ERR 0x02 /* CRC error */
+#define F_OVR_FLO 0x01 /* overflow error */
+
+#define F_BUF_EMP 0x40 /* receive buffer is empty */
+
+#define F_SKP_PKT 0x05 /* drop packet in buffer */
+
+/* default bitmaps */
+#define D_TX_INTR ( ENA_TMT_OK )
+#define D_RX_INTR ( ENA_PKT_RDY | ENA_LEN_ERR \
+ | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
+#define TX_STAT_M ( F_TMT_RDY )
+#define RX_STAT_M ( F_PKT_RDY | F_LEN_ERR \
+ | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
+
+/* commands */
+#define D_TX_MODE 0x06 /* no tests, detect carrier */
+#define ID_MATCHED 0x02 /* (RX_MODE) */
+#define RECV_ALL 0x03 /* (RX_MODE) */
+#define CONFIG0_DFL 0x5a /* 16bit bus, 4K x 2 Tx queues */
+#define CONFIG0_DFL_1 0x5e /* 16bit bus, 8K x 2 Tx queues */
+#define CONFIG0_RST 0xda /* Data Link Controller off (CONFIG_0) */
+#define CONFIG0_RST_1 0xde /* Data Link Controller off (CONFIG_0) */
+#define BANK_0 0xa0 /* bank 0 (CONFIG_1) */
+#define BANK_1 0xa4 /* bank 1 (CONFIG_1) */
+#define BANK_2 0xa8 /* bank 2 (CONFIG_1) */
+#define CHIP_OFF 0x80 /* contrl chip power off (CONFIG_1) */
+#define DO_TX 0x80 /* do transmit packet */
+#define SEND_PKT 0x81 /* send a packet */
+#define AUTO_MODE 0x07 /* Auto skip packet on 16 col detected */
+#define MANU_MODE 0x03 /* Stop and skip packet on 16 col */
+#define TDK_AUTO_MODE 0x47 /* Auto skip packet on 16 col detected */
+#define TDK_MANU_MODE 0x43 /* Stop and skip packet on 16 col */
+#define INTR_OFF 0x0d /* LAN controller ignores interrupts */
+#define INTR_ON 0x1d /* LAN controller will catch interrupts */
+
+#define TX_TIMEOUT ((400*HZ)/1000)
+
+#define BANK_0U 0x20 /* bank 0 (CONFIG_1) */
+#define BANK_1U 0x24 /* bank 1 (CONFIG_1) */
+#define BANK_2U 0x28 /* bank 2 (CONFIG_1) */
+
+static const struct net_device_ops fjn_netdev_ops = {
+ .ndo_open = fjn_open,
+ .ndo_stop = fjn_close,
+ .ndo_start_xmit = fjn_start_xmit,
+ .ndo_tx_timeout = fjn_tx_timeout,
+ .ndo_set_config = fjn_config,
+ .ndo_set_rx_mode = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int fmvj18x_probe(struct pcmcia_device *link)
+{
+ struct local_info *lp;
+ struct net_device *dev;
+
+ dev_dbg(&link->dev, "fmvj18x_attach()\n");
+
+ /* Make up a FMVJ18x specific data structure */
+ dev = alloc_etherdev(sizeof(struct local_info));
+ if (!dev)
+ return -ENOMEM;
+ lp = netdev_priv(dev);
+ link->priv = dev;
+ lp->p_dev = link;
+ lp->base = NULL;
+
+ /* The io structure describes IO port mapping */
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
+ /* General socket configuration */
+ link->config_flags |= CONF_ENABLE_IRQ;
+
+ dev->netdev_ops = &fjn_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ dev->ethtool_ops = &netdev_ethtool_ops;
+
+ return fmvj18x_config(link);
+} /* fmvj18x_attach */
+
+/*====================================================================*/
+
+static void fmvj18x_detach(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ dev_dbg(&link->dev, "fmvj18x_detach\n");
+
+ unregister_netdev(dev);
+
+ fmvj18x_release(link);
+
+ free_netdev(dev);
+} /* fmvj18x_detach */
+
+/*====================================================================*/
+
+static int mfc_try_io_port(struct pcmcia_device *link)
+{
+ int i, ret;
+ static const unsigned int serial_base[5] =
+ { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+
+ for (i = 0; i < 5; i++) {
+ link->resource[1]->start = serial_base[i];
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->start == 0) {
+ link->resource[1]->end = 0;
+ pr_notice("out of resource for serial\n");
+ }
+ ret = pcmcia_request_io(link);
+ if (ret == 0)
+ return ret;
+ }
+ return ret;
+}
+
+static int ungermann_try_io_port(struct pcmcia_device *link)
+{
+ int ret;
+ unsigned int ioaddr;
+ /*
+ Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
+ 0x380,0x3c0 only for ioport.
+ */
+ for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
+ link->resource[0]->start = ioaddr;
+ ret = pcmcia_request_io(link);
+ if (ret == 0) {
+ /* calculate ConfigIndex value */
+ link->config_index =
+ ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
+ return ret;
+ }
+ }
+ return ret; /* RequestIO failed */
+}
+
+static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
+{
+ return 0; /* strange, but that's what the code did already before... */
+}
+
+static int fmvj18x_config(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct local_info *lp = netdev_priv(dev);
+ int i, ret;
+ unsigned int ioaddr;
+ enum cardtype cardtype;
+ char *card_name = "unknown";
+ u8 *buf;
+ size_t len;
+ u_char buggybuf[32];
+
+ dev_dbg(&link->dev, "fmvj18x_config\n");
+
+ link->io_lines = 5;
+
+ len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+ kfree(buf);
+
+ if (len) {
+ /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
+ ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
+ if (ret != 0)
+ goto failed;
+
+ switch (link->manf_id) {
+ case MANFID_TDK:
+ cardtype = TDK;
+ if (link->card_id == PRODID_TDK_GN3410 ||
+ link->card_id == PRODID_TDK_NP9610 ||
+ link->card_id == PRODID_TDK_MN3200) {
+ /* MultiFunction Card */
+ link->config_base = 0x800;
+ link->config_index = 0x47;
+ link->resource[1]->end = 8;
+ }
+ break;
+ case MANFID_NEC:
+ cardtype = NEC; /* MultiFunction Card */
+ link->config_base = 0x800;
+ link->config_index = 0x47;
+ link->resource[1]->end = 8;
+ break;
+ case MANFID_KME:
+ cardtype = KME; /* MultiFunction Card */
+ link->config_base = 0x800;
+ link->config_index = 0x47;
+ link->resource[1]->end = 8;
+ break;
+ case MANFID_CONTEC:
+ cardtype = CONTEC;
+ break;
+ case MANFID_FUJITSU:
+ if (link->config_base == 0x0fe0)
+ cardtype = MBH10302;
+ else if (link->card_id == PRODID_FUJITSU_MBH10302)
+ /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
+ but these are MBH10304 based card. */
+ cardtype = MBH10304;
+ else if (link->card_id == PRODID_FUJITSU_MBH10304)
+ cardtype = MBH10304;
+ else
+ cardtype = LA501;
+ break;
+ default:
+ cardtype = MBH10304;
+ }
+ } else {
+ /* old type card */
+ switch (link->manf_id) {
+ case MANFID_FUJITSU:
+ if (link->card_id == PRODID_FUJITSU_MBH10304) {
+ cardtype = XXX10304; /* MBH10304 with buggy CIS */
+ link->config_index = 0x20;
+ } else {
+ cardtype = MBH10302; /* NextCom NC5310, etc. */
+ link->config_index = 1;
+ }
+ break;
+ case MANFID_UNGERMANN:
+ cardtype = UNGERMANN;
+ break;
+ default:
+ cardtype = MBH10302;
+ link->config_index = 1;
+ }
+ }
+
+ if (link->resource[1]->end != 0) {
+ ret = mfc_try_io_port(link);
+ if (ret != 0) goto failed;
+ } else if (cardtype == UNGERMANN) {
+ ret = ungermann_try_io_port(link);
+ if (ret != 0) goto failed;
+ } else {
+ ret = pcmcia_request_io(link);
+ if (ret)
+ goto failed;
+ }
+ ret = pcmcia_request_irq(link, fjn_interrupt);
+ if (ret)
+ goto failed;
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ dev->irq = link->irq;
+ dev->base_addr = link->resource[0]->start;
+
+ if (resource_size(link->resource[1]) != 0) {
+ ret = fmvj18x_setup_mfc(link);
+ if (ret != 0) goto failed;
+ }
+
+ ioaddr = dev->base_addr;
+
+ /* Reset controller */
+ if (sram_config == 0)
+ outb(CONFIG0_RST, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+ /* Power On chip and select bank 0 */
+ if (cardtype == MBH10302)
+ outb(BANK_0, ioaddr + CONFIG_1);
+ else
+ outb(BANK_0U, ioaddr + CONFIG_1);
+
+ /* Set hardware address */
+ switch (cardtype) {
+ case MBH10304:
+ case TDK:
+ case LA501:
+ case CONTEC:
+ case NEC:
+ case KME:
+ if (cardtype == MBH10304) {
+ card_name = "FMV-J182";
+
+ len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+ if (len < 11) {
+ kfree(buf);
+ goto failed;
+ }
+ /* Read MACID from CIS */
+ for (i = 5; i < 11; i++)
+ dev->dev_addr[i] = buf[i];
+ kfree(buf);
+ } else {
+ if (pcmcia_get_mac_from_cis(link, dev))
+ goto failed;
+ if( cardtype == TDK ) {
+ card_name = "TDK LAK-CD021";
+ } else if( cardtype == LA501 ) {
+ card_name = "LA501";
+ } else if( cardtype == NEC ) {
+ card_name = "PK-UG-J001";
+ } else if( cardtype == KME ) {
+ card_name = "Panasonic";
+ } else {
+ card_name = "C-NET(PC)C";
+ }
+ }
+ break;
+ case UNGERMANN:
+ /* Read MACID from register */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
+ card_name = "Access/CARD";
+ break;
+ case XXX10304:
+ /* Read MACID from Buggy CIS */
+ if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
+ pr_notice("unable to read hardware net address\n");
+ goto failed;
+ }
+ for (i = 0 ; i < 6; i++) {
+ dev->dev_addr[i] = buggybuf[i];
+ }
+ card_name = "FMV-J182";
+ break;
+ case MBH10302:
+ default:
+ /* Read MACID from register */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
+ card_name = "FMV-J181";
+ break;
+ }
+
+ lp->cardtype = cardtype;
+ SET_NETDEV_DEV(dev, &link->dev);
+
+ if (register_netdev(dev) != 0) {
+ pr_notice("register_netdev() failed\n");
+ goto failed;
+ }
+
+ /* print current configuration */
+ netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
+ card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
+ dev->base_addr, dev->irq, dev->dev_addr);
+
+ return 0;
+
+failed:
+ fmvj18x_release(link);
+ return -ENODEV;
+} /* fmvj18x_config */
+/*====================================================================*/
+
+static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
+{
+ u_char __iomem *base;
+ int i, j;
+
+ /* Allocate a small memory window */
+ link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+ link->resource[2]->start = 0; link->resource[2]->end = 0;
+ i = pcmcia_request_window(link, link->resource[2], 0);
+ if (i != 0)
+ return -1;
+
+ base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
+ pcmcia_map_mem_page(link, link->resource[2], 0);
+
+ /*
+ * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
+ * 22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
+ * 'xx' is garbage.
+ * 'yy' is MAC address.
+ */
+ for (i = 0; i < 0x200; i++) {
+ if (readb(base+i*2) == 0x22) {
+ if (readb(base+(i-1)*2) == 0xff &&
+ readb(base+(i+5)*2) == 0x04 &&
+ readb(base+(i+6)*2) == 0x06 &&
+ readb(base+(i+13)*2) == 0xff)
+ break;
+ }
+ }
+
+ if (i != 0x200) {
+ for (j = 0 ; j < 6; j++,i++) {
+ node_id[j] = readb(base+(i+7)*2);
+ }
+ }
+
+ iounmap(base);
+ j = pcmcia_release_window(link, link->resource[2]);
+ return (i != 0x200) ? 0 : -1;
+
+} /* fmvj18x_get_hwinfo */
+/*====================================================================*/
+
+static int fmvj18x_setup_mfc(struct pcmcia_device *link)
+{
+ int i;
+ struct net_device *dev = link->priv;
+ unsigned int ioaddr;
+ struct local_info *lp = netdev_priv(dev);
+
+ /* Allocate a small memory window */
+ link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+ link->resource[3]->start = link->resource[3]->end = 0;
+ i = pcmcia_request_window(link, link->resource[3], 0);
+ if (i != 0)
+ return -1;
+
+ lp->base = ioremap(link->resource[3]->start,
+ resource_size(link->resource[3]));
+ if (lp->base == NULL) {
+ netdev_notice(dev, "ioremap failed\n");
+ return -1;
+ }
+
+ i = pcmcia_map_mem_page(link, link->resource[3], 0);
+ if (i != 0) {
+ iounmap(lp->base);
+ lp->base = NULL;
+ return -1;
+ }
+
+ ioaddr = dev->base_addr;
+ writeb(0x47, lp->base+0x800); /* Config Option Register of LAN */
+ writeb(0x0, lp->base+0x802); /* Config and Status Register */
+
+ writeb(ioaddr & 0xff, lp->base+0x80a); /* I/O Base(Low) of LAN */
+ writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
+
+ writeb(0x45, lp->base+0x820); /* Config Option Register of Modem */
+ writeb(0x8, lp->base+0x822); /* Config and Status Register */
+
+ return 0;
+
+}
+/*====================================================================*/
+
+static void fmvj18x_release(struct pcmcia_device *link)
+{
+
+ struct net_device *dev = link->priv;
+ struct local_info *lp = netdev_priv(dev);
+ u_char __iomem *tmp;
+
+ dev_dbg(&link->dev, "fmvj18x_release\n");
+
+ if (lp->base != NULL) {
+ tmp = lp->base;
+ lp->base = NULL; /* set NULL before iounmap */
+ iounmap(tmp);
+ }
+
+ pcmcia_disable_device(link);
+
+}
+
+static int fmvj18x_suspend(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open)
+ netif_device_detach(dev);
+
+ return 0;
+}
+
+static int fmvj18x_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open) {
+ fjn_reset(dev);
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+
+/*====================================================================*/
+
+static const struct pcmcia_device_id fmvj18x_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
+ PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
+ PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
+ PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
+ PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
+ PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
+ PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
+ PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
+ PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0 ", 0x8cef4d3a, 0x075fc7b6),
+ PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0 ", 0x8cef4d3a, 0xbccf43e6),
+ PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
+ PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
+ PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
+ PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
+ PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304 ES", 0x2599f454),
+ PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
+ PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
+
+static struct pcmcia_driver fmvj18x_cs_driver = {
+ .owner = THIS_MODULE,
+ .name = "fmvj18x_cs",
+ .probe = fmvj18x_probe,
+ .remove = fmvj18x_detach,
+ .id_table = fmvj18x_ids,
+ .suspend = fmvj18x_suspend,
+ .resume = fmvj18x_resume,
+};
+module_pcmcia_driver(fmvj18x_cs_driver);
+
+/*====================================================================*/
+
+static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct local_info *lp = netdev_priv(dev);
+ unsigned int ioaddr;
+ unsigned short tx_stat, rx_stat;
+
+ ioaddr = dev->base_addr;
+
+ /* avoid multiple interrupts */
+ outw(0x0000, ioaddr + TX_INTR);
+
+ /* wait for a while */
+ udelay(1);
+
+ /* get status */
+ tx_stat = inb(ioaddr + TX_STATUS);
+ rx_stat = inb(ioaddr + RX_STATUS);
+
+ /* clear status */
+ outb(tx_stat, ioaddr + TX_STATUS);
+ outb(rx_stat, ioaddr + RX_STATUS);
+
+ pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
+ pr_debug(" tx_status %02x.\n", tx_stat);
+
+ if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
+ /* there is packet(s) in rx buffer */
+ fjn_rx(dev);
+ }
+ if (tx_stat & F_TMT_RDY) {
+ dev->stats.tx_packets += lp->sent ;
+ lp->sent = 0 ;
+ if (lp->tx_queue) {
+ outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
+ lp->sent = lp->tx_queue ;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ dev->trans_start = jiffies;
+ } else {
+ lp->tx_started = 0;
+ }
+ netif_wake_queue(dev);
+ }
+ pr_debug("%s: exiting interrupt,\n", dev->name);
+ pr_debug(" tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
+
+ outb(D_TX_INTR, ioaddr + TX_INTR);
+ outb(D_RX_INTR, ioaddr + RX_INTR);
+
+ if (lp->base != NULL) {
+ /* Ack interrupt for multifunction card */
+ writeb(0x01, lp->base+0x802);
+ writeb(0x09, lp->base+0x822);
+ }
+
+ return IRQ_HANDLED;
+
+} /* fjn_interrupt */
+
+/*====================================================================*/
+
+static void fjn_tx_timeout(struct net_device *dev)
+{
+ struct local_info *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+
+ netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
+ htons(inw(ioaddr + TX_STATUS)),
+ inb(ioaddr + TX_STATUS) & F_TMT_RDY
+ ? "IRQ conflict" : "network cable problem");
+ netdev_notice(dev, "timeout registers: %04x %04x %04x "
+ "%04x %04x %04x %04x %04x.\n",
+ htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
+ htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
+ htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
+ htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
+ dev->stats.tx_errors++;
+ /* ToDo: We should try to restart the adaptor... */
+ local_irq_disable();
+ fjn_reset(dev);
+
+ lp->tx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->sent = 0;
+ lp->open_time = jiffies;
+ local_irq_enable();
+ netif_wake_queue(dev);
+}
+
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct local_info *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ short length = skb->len;
+
+ if (length < ETH_ZLEN)
+ {
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+ length = ETH_ZLEN;
+ }
+
+ netif_stop_queue(dev);
+
+ {
+ unsigned char *buf = skb->data;
+
+ if (length > ETH_FRAME_LEN) {
+ netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
+ length);
+ return NETDEV_TX_BUSY;
+ }
+
+ netdev_dbg(dev, "Transmitting a packet of length %lu\n",
+ (unsigned long)skb->len);
+ dev->stats.tx_bytes += skb->len;
+
+ /* Disable both interrupts. */
+ outw(0x0000, ioaddr + TX_INTR);
+
+ /* wait for a while */
+ udelay(1);
+
+ outw(length, ioaddr + DATAPORT);
+ outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
+
+ lp->tx_queue++;
+ lp->tx_queue_len += ((length+3) & ~1);
+
+ if (lp->tx_started == 0) {
+ /* If the Tx is idle, always trigger a transmit. */
+ outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
+ lp->sent = lp->tx_queue ;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->tx_started = 1;
+ netif_start_queue(dev);
+ } else {
+ if( sram_config == 0 ) {
+ if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
+ /* Yes, there is room for one more packet. */
+ netif_start_queue(dev);
+ } else {
+ if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) &&
+ lp->tx_queue < 127 )
+ /* Yes, there is room for one more packet. */
+ netif_start_queue(dev);
+ }
+ }
+
+ /* Re-enable interrupts */
+ outb(D_TX_INTR, ioaddr + TX_INTR);
+ outb(D_RX_INTR, ioaddr + RX_INTR);
+ }
+ dev_kfree_skb (skb);
+
+ return NETDEV_TX_OK;
+} /* fjn_start_xmit */
+
+/*====================================================================*/
+
+static void fjn_reset(struct net_device *dev)
+{
+ struct local_info *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ int i;
+
+ netdev_dbg(dev, "fjn_reset() called\n");
+
+ /* Reset controller */
+ if( sram_config == 0 )
+ outb(CONFIG0_RST, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+ /* Power On chip and select bank 0 */
+ if (lp->cardtype == MBH10302)
+ outb(BANK_0, ioaddr + CONFIG_1);
+ else
+ outb(BANK_0U, ioaddr + CONFIG_1);
+
+ /* Set Tx modes */
+ outb(D_TX_MODE, ioaddr + TX_MODE);
+ /* set Rx modes */
+ outb(ID_MATCHED, ioaddr + RX_MODE);
+
+ /* Set hardware address */
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
+
+ /* (re)initialize the multicast table */
+ set_rx_mode(dev);
+
+ /* Switch to bank 2 (runtime mode) */
+ if (lp->cardtype == MBH10302)
+ outb(BANK_2, ioaddr + CONFIG_1);
+ else
+ outb(BANK_2U, ioaddr + CONFIG_1);
+
+ /* set 16col ctrl bits */
+ if( lp->cardtype == TDK || lp->cardtype == CONTEC)
+ outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
+ else
+ outb(AUTO_MODE, ioaddr + COL_CTRL);
+
+ /* clear Reserved Regs */
+ outb(0x00, ioaddr + BMPR12);
+ outb(0x00, ioaddr + BMPR13);
+
+ /* reset Skip packet reg. */
+ outb(0x01, ioaddr + RX_SKIP);
+
+ /* Enable Tx and Rx */
+ if( sram_config == 0 )
+ outb(CONFIG0_DFL, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
+
+ /* Init receive pointer ? */
+ inw(ioaddr + DATAPORT);
+ inw(ioaddr + DATAPORT);
+
+ /* Clear all status */
+ outb(0xff, ioaddr + TX_STATUS);
+ outb(0xff, ioaddr + RX_STATUS);
+
+ if (lp->cardtype == MBH10302)
+ outb(INTR_OFF, ioaddr + LAN_CTRL);
+
+ /* Turn on Rx interrupts */
+ outb(D_TX_INTR, ioaddr + TX_INTR);
+ outb(D_RX_INTR, ioaddr + RX_INTR);
+
+ /* Turn on interrupts from LAN card controller */
+ if (lp->cardtype == MBH10302)
+ outb(INTR_ON, ioaddr + LAN_CTRL);
+} /* fjn_reset */
+
+/*====================================================================*/
+
+static void fjn_rx(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ int boguscount = 10; /* 5 -> 10: by agy 19940922 */
+
+ pr_debug("%s: in rx_packet(), rx_status %02x.\n",
+ dev->name, inb(ioaddr + RX_STATUS));
+
+ while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
+ u_short status = inw(ioaddr + DATAPORT);
+
+ netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
+ inb(ioaddr + RX_MODE), status);
+#ifndef final_version
+ if (status == 0) {
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ break;
+ }
+#endif
+ if ((status & 0xF0) != 0x20) { /* There was an error. */
+ dev->stats.rx_errors++;
+ if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
+ if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
+ if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
+ if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
+ } else {
+ u_short pkt_len = inw(ioaddr + DATAPORT);
+ /* Malloc up new buffer. */
+ struct sk_buff *skb;
+
+ if (pkt_len > 1550) {
+ netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
+ pkt_len);
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ dev->stats.rx_errors++;
+ break;
+ }
+ skb = netdev_alloc_skb(dev, pkt_len + 2);
+ if (skb == NULL) {
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ dev->stats.rx_dropped++;
+ break;
+ }
+
+ skb_reserve(skb, 2);
+ insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
+ (pkt_len + 1) >> 1);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ {
+ int i;
+ pr_debug("%s: Rxed packet of length %d: ",
+ dev->name, pkt_len);
+ for (i = 0; i < 14; i++)
+ pr_debug(" %02x", skb->data[i]);
+ pr_debug(".\n");
+ }
+
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ }
+ if (--boguscount <= 0)
+ break;
+ }
+
+ /* If any worth-while packets have been received, dev_rint()
+ has done a netif_wake_queue() for us and will work on them
+ when we get to the bottom-half routine. */
+/*
+ if (lp->cardtype != TDK) {
+ int i;
+ for (i = 0; i < 20; i++) {
+ if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
+ break;
+ (void)inw(ioaddr + DATAPORT); /+ dummy status read +/
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ }
+
+ if (i > 0)
+ pr_debug("%s: Exint Rx packet with mode %02x after "
+ "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
+ }
+*/
+} /* fjn_rx */
+
+/*====================================================================*/
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ snprintf(info->bus_info, sizeof(info->bus_info),
+ "PCMCIA 0x%lx", dev->base_addr);
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+static int fjn_config(struct net_device *dev, struct ifmap *map){
+ return 0;
+}
+
+static int fjn_open(struct net_device *dev)
+{
+ struct local_info *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+
+ pr_debug("fjn_open('%s').\n", dev->name);
+
+ if (!pcmcia_dev_present(link))
+ return -ENODEV;
+
+ link->open++;
+
+ fjn_reset(dev);
+
+ lp->tx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->open_time = jiffies;
+ netif_start_queue(dev);
+
+ return 0;
+} /* fjn_open */
+
+/*====================================================================*/
+
+static int fjn_close(struct net_device *dev)
+{
+ struct local_info *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+ unsigned int ioaddr = dev->base_addr;
+
+ pr_debug("fjn_close('%s').\n", dev->name);
+
+ lp->open_time = 0;
+ netif_stop_queue(dev);
+
+ /* Set configuration register 0 to disable Tx and Rx. */
+ if( sram_config == 0 )
+ outb(CONFIG0_RST ,ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
+
+ /* Update the statistics -- ToDo. */
+
+ /* Power-down the chip. Green, green, green! */
+ outb(CHIP_OFF ,ioaddr + CONFIG_1);
+
+ /* Set the ethernet adaptor disable IRQ */
+ if (lp->cardtype == MBH10302)
+ outb(INTR_OFF, ioaddr + LAN_CTRL);
+
+ link->open--;
+
+ return 0;
+} /* fjn_close */
+
+/*====================================================================*/
+
+/*
+ Set the multicast/promiscuous mode for this adaptor.
+*/
+
+static void set_rx_mode(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ u_char mc_filter[8]; /* Multicast hash filter */
+ u_long flags;
+ int i;
+
+ int saved_bank;
+ int saved_config_0 = inb(ioaddr + CONFIG_0);
+
+ local_irq_save(flags);
+
+ /* Disable Tx and Rx */
+ if (sram_config == 0)
+ outb(CONFIG0_RST, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+ if (dev->flags & IFF_PROMISC) {
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */
+ } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ outb(2, ioaddr + RX_MODE); /* Use normal mode. */
+ } else if (netdev_mc_empty(dev)) {
+ memset(mc_filter, 0x00, sizeof(mc_filter));
+ outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */
+ } else {
+ struct netdev_hw_addr *ha;
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ netdev_for_each_mc_addr(ha, dev) {
+ unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
+ mc_filter[bit >> 3] |= (1 << (bit & 7));
+ }
+ outb(2, ioaddr + RX_MODE); /* Use normal mode. */
+ }
+
+ /* Switch to bank 1 and set the multicast table. */
+ saved_bank = inb(ioaddr + CONFIG_1);
+ outb(0xe4, ioaddr + CONFIG_1);
+
+ for (i = 0; i < 8; i++)
+ outb(mc_filter[i], ioaddr + MAR_ADR + i);
+ outb(saved_bank, ioaddr + CONFIG_1);
+
+ outb(saved_config_0, ioaddr + CONFIG_0);
+
+ local_irq_restore(flags);
+}