summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000')
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000.h7
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_hw.c216
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_main.c133
3 files changed, 188 insertions, 168 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h
index 69707108d..98fe5a2cd 100644
--- a/drivers/net/ethernet/intel/e1000/e1000.h
+++ b/drivers/net/ethernet/intel/e1000/e1000.h
@@ -213,8 +213,11 @@ struct e1000_rx_ring {
};
#define E1000_DESC_UNUSED(R) \
- ((((R)->next_to_clean > (R)->next_to_use) \
- ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
+({ \
+ unsigned int clean = smp_load_acquire(&(R)->next_to_clean); \
+ unsigned int use = READ_ONCE((R)->next_to_use); \
+ (clean > use ? 0 : (R)->count) + clean - use - 1; \
+})
#define E1000_RX_DESC_EXT(R, i) \
(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index b1af0d613..8172cf08c 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -1,5 +1,5 @@
/*******************************************************************************
-
+*
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2006 Intel Corporation.
@@ -106,7 +106,7 @@ u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
120, 120
};
-static DEFINE_SPINLOCK(e1000_eeprom_lock);
+static DEFINE_MUTEX(e1000_eeprom_lock);
static DEFINE_SPINLOCK(e1000_phy_lock);
/**
@@ -624,8 +624,8 @@ s32 e1000_init_hw(struct e1000_hw *hw)
/* Workaround for PCI-X problem when BIOS sets MMRBC
* incorrectly.
*/
- if (hw->bus_type == e1000_bus_type_pcix
- && e1000_pcix_get_mmrbc(hw) > 2048)
+ if (hw->bus_type == e1000_bus_type_pcix &&
+ e1000_pcix_get_mmrbc(hw) > 2048)
e1000_pcix_set_mmrbc(hw, 2048);
break;
}
@@ -683,10 +683,9 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
}
ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
- &eeprom_data);
- if (ret_val) {
+ &eeprom_data);
+ if (ret_val)
return ret_val;
- }
if (eeprom_data != EEPROM_RESERVED_WORD) {
/* Adjust SERDES output amplitude only. */
@@ -1074,8 +1073,8 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
if (hw->mac_type <= e1000_82543 ||
hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
- hw->mac_type == e1000_82541_rev_2
- || hw->mac_type == e1000_82547_rev_2)
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2)
hw->phy_reset_disable = false;
return E1000_SUCCESS;
@@ -1652,7 +1651,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_1000t_ctrl_reg = 0;
} else {
ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
- mii_1000t_ctrl_reg);
+ mii_1000t_ctrl_reg);
if (ret_val)
return ret_val;
}
@@ -1881,10 +1880,11 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
- && (!hw->autoneg)
- && (hw->forced_speed_duplex == e1000_10_full
- || hw->forced_speed_duplex == e1000_10_half)) {
+ if ((hw->mac_type == e1000_82544 ||
+ hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) &&
+ (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
ret_val = e1000_polarity_reversal_workaround(hw);
if (ret_val)
return ret_val;
@@ -2084,11 +2084,12 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
* so we had to force link. In this case, we need to force the
* configuration of the MAC to match the "fc" parameter.
*/
- if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
- || ((hw->media_type == e1000_media_type_internal_serdes)
- && (hw->autoneg_failed))
- || ((hw->media_type == e1000_media_type_copper)
- && (!hw->autoneg))) {
+ if (((hw->media_type == e1000_media_type_fiber) &&
+ (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_internal_serdes) &&
+ (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_copper) &&
+ (!hw->autoneg))) {
ret_val = e1000_force_mac_fc(hw);
if (ret_val) {
e_dbg("Error forcing flow control settings\n");
@@ -2193,8 +2194,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
- {
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc = E1000_FC_TX_PAUSE;
e_dbg
("Flow Control = TX PAUSE frames only.\n");
@@ -2210,8 +2210,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
- {
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc = E1000_FC_RX_PAUSE;
e_dbg
("Flow Control = RX PAUSE frames only.\n");
@@ -2460,10 +2459,11 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
* happen due to the execution of this workaround.
*/
- if ((hw->mac_type == e1000_82544
- || hw->mac_type == e1000_82543) && (!hw->autoneg)
- && (hw->forced_speed_duplex == e1000_10_full
- || hw->forced_speed_duplex == e1000_10_half)) {
+ if ((hw->mac_type == e1000_82544 ||
+ hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) &&
+ (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
ew32(IMC, 0xffffffff);
ret_val =
e1000_polarity_reversal_workaround(hw);
@@ -2528,8 +2528,10 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
*/
if (hw->tbi_compatibility_en) {
u16 speed, duplex;
+
ret_val =
e1000_get_speed_and_duplex(hw, &speed, &duplex);
+
if (ret_val) {
e_dbg
("Error getting link speed and duplex\n");
@@ -2628,10 +2630,10 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
if (ret_val)
return ret_val;
- if ((*speed == SPEED_100
- && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
- || (*speed == SPEED_10
- && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ if ((*speed == SPEED_100 &&
+ !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
+ (*speed == SPEED_10 &&
+ !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
*duplex = HALF_DUPLEX;
}
}
@@ -2664,9 +2666,9 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
if (ret_val)
return ret_val;
- if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ if (phy_data & MII_SR_AUTONEG_COMPLETE)
return E1000_SUCCESS;
- }
+
msleep(100);
}
return E1000_SUCCESS;
@@ -2803,11 +2805,11 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
return data;
}
-
/**
* e1000_read_phy_reg - read a phy register
* @hw: Struct containing variables accessed by shared code
* @reg_addr: address of the PHY register to read
+ * @phy_data: pointer to the value on the PHY register
*
* Reads the value from a PHY register, if the value is on a specific non zero
* page, sets the page first.
@@ -2823,14 +2825,13 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
(u16) reg_addr);
- if (ret_val) {
- spin_unlock_irqrestore(&e1000_phy_lock, flags);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
phy_data);
+out:
spin_unlock_irqrestore(&e1000_phy_lock, flags);
return ret_val;
@@ -2881,7 +2882,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
e_dbg("MDI Read Error\n");
return -E1000_ERR_PHY;
}
- *phy_data = (u16) mdic;
+ *phy_data = (u16)mdic;
} else {
mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
@@ -2906,7 +2907,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
- *phy_data = (u16) mdic;
+ *phy_data = (u16)mdic;
}
} else {
/* We must first send a preamble through the MDIO pin to signal
@@ -2960,7 +2961,7 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
if ((hw->phy_type == e1000_phy_igp) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (u16) reg_addr);
+ (u16)reg_addr);
if (ret_val) {
spin_unlock_irqrestore(&e1000_phy_lock, flags);
return ret_val;
@@ -2993,7 +2994,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
* the desired data.
*/
if (hw->mac_type == e1000_ce4100) {
- mdic = (((u32) phy_data) |
+ mdic = (((u32)phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(INTEL_CE_GBE_MDIC_OP_WRITE) |
@@ -3015,7 +3016,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
return -E1000_ERR_PHY;
}
} else {
- mdic = (((u32) phy_data) |
+ mdic = (((u32)phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_WRITE));
@@ -3053,7 +3054,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
(PHY_OP_WRITE << 12) | (PHY_SOF << 14));
mdic <<= 16;
- mdic |= (u32) phy_data;
+ mdic |= (u32)phy_data;
e1000_shift_out_mdi_bits(hw, mdic, 32);
}
@@ -3176,14 +3177,14 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw->phy_id = (u32) (phy_id_high << 16);
+ hw->phy_id = (u32)(phy_id_high << 16);
udelay(20);
ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
if (ret_val)
return ret_val;
- hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
- hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+ hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK;
switch (hw->mac_type) {
case e1000_82543:
@@ -3401,7 +3402,6 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
}
return E1000_SUCCESS;
@@ -3449,7 +3449,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
if (hw->phy_type == e1000_phy_igp)
return e1000_phy_igp_get_info(hw, phy_info);
else if ((hw->phy_type == e1000_phy_8211) ||
- (hw->phy_type == e1000_phy_8201))
+ (hw->phy_type == e1000_phy_8201))
return E1000_SUCCESS;
else
return e1000_phy_m88_get_info(hw, phy_info);
@@ -3611,11 +3611,11 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
*/
mask = 0x01 << (count - 1);
eecd = er32(EECD);
- if (eeprom->type == e1000_eeprom_microwire) {
+ if (eeprom->type == e1000_eeprom_microwire)
eecd &= ~E1000_EECD_DO;
- } else if (eeprom->type == e1000_eeprom_spi) {
+ else if (eeprom->type == e1000_eeprom_spi)
eecd |= E1000_EECD_DO;
- }
+
do {
/* A "1" is shifted out to the EEPROM by setting bit "DI" to a
* "1", and then raising and then lowering the clock (the SK bit
@@ -3851,7 +3851,7 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
do {
e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
hw->eeprom.opcode_bits);
- spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
+ spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
break;
@@ -3882,9 +3882,10 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
s32 ret;
- spin_lock(&e1000_eeprom_lock);
+
+ mutex_lock(&e1000_eeprom_lock);
ret = e1000_do_read_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
+ mutex_unlock(&e1000_eeprom_lock);
return ret;
}
@@ -3896,15 +3897,16 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
if (hw->mac_type == e1000_ce4100) {
GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words,
- data);
+ data);
return E1000_SUCCESS;
}
/* A check for invalid values: offset too large, too many words, and
* not enough words.
*/
- if ((offset >= eeprom->word_size)
- || (words > eeprom->word_size - offset) || (words == 0)) {
+ if ((offset >= eeprom->word_size) ||
+ (words > eeprom->word_size - offset) ||
+ (words == 0)) {
e_dbg("\"words\" parameter out of bounds. Words = %d,"
"size = %d\n", offset, eeprom->word_size);
return -E1000_ERR_EEPROM;
@@ -3940,7 +3942,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
/* Send the READ command (opcode + addr) */
e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
+ e1000_shift_out_ee_bits(hw, (u16)(offset * 2),
eeprom->address_bits);
/* Read the data. The address of the eeprom internally
@@ -3960,7 +3962,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
e1000_shift_out_ee_bits(hw,
EEPROM_READ_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset + i),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + i),
eeprom->address_bits);
/* Read the data. For microwire, each word requires the
@@ -3968,6 +3970,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
*/
data[i] = e1000_shift_in_ee_bits(hw, 16);
e1000_standby_eeprom(hw);
+ cond_resched();
}
}
@@ -4004,7 +4007,7 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
return E1000_SUCCESS;
#endif
- if (checksum == (u16) EEPROM_SUM)
+ if (checksum == (u16)EEPROM_SUM)
return E1000_SUCCESS;
else {
e_dbg("EEPROM Checksum Invalid\n");
@@ -4031,7 +4034,7 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
}
checksum += eeprom_data;
}
- checksum = (u16) EEPROM_SUM - checksum;
+ checksum = (u16)EEPROM_SUM - checksum;
if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
e_dbg("EEPROM Write Error\n");
return -E1000_ERR_EEPROM;
@@ -4052,9 +4055,10 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
s32 ret;
- spin_lock(&e1000_eeprom_lock);
+
+ mutex_lock(&e1000_eeprom_lock);
ret = e1000_do_write_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
+ mutex_unlock(&e1000_eeprom_lock);
return ret;
}
@@ -4066,15 +4070,16 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
if (hw->mac_type == e1000_ce4100) {
GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words,
- data);
+ data);
return E1000_SUCCESS;
}
/* A check for invalid values: offset too large, too many words, and
* not enough words.
*/
- if ((offset >= eeprom->word_size)
- || (words > eeprom->word_size - offset) || (words == 0)) {
+ if ((offset >= eeprom->word_size) ||
+ (words > eeprom->word_size - offset) ||
+ (words == 0)) {
e_dbg("\"words\" parameter out of bounds\n");
return -E1000_ERR_EEPROM;
}
@@ -4116,6 +4121,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
return -E1000_ERR_EEPROM;
e1000_standby_eeprom(hw);
+ cond_resched();
/* Send the WRITE ENABLE command (8 bit opcode ) */
e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
@@ -4132,7 +4138,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
/* Send the Write command (8-bit opcode + addr) */
e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
+ e1000_shift_out_ee_bits(hw, (u16)((offset + widx) * 2),
eeprom->address_bits);
/* Send the data */
@@ -4142,6 +4148,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
*/
while (widx < words) {
u16 word_out = data[widx];
+
word_out = (word_out >> 8) | (word_out << 8);
e1000_shift_out_ee_bits(hw, word_out, 16);
widx++;
@@ -4183,9 +4190,9 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
* EEPROM into write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
- (u16) (eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
/* Prepare the EEPROM */
e1000_standby_eeprom(hw);
@@ -4195,7 +4202,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
eeprom->address_bits);
/* Send the data */
@@ -4224,6 +4231,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
/* Recover from write */
e1000_standby_eeprom(hw);
+ cond_resched();
words_written++;
}
@@ -4235,9 +4243,9 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
* EEPROM out of write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
- (u16) (eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
return E1000_SUCCESS;
}
@@ -4260,8 +4268,8 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw)
e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
- hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
- hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
+ hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i + 1] = (u8)(eeprom_data >> 8);
}
switch (hw->mac_type) {
@@ -4328,19 +4336,19 @@ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
*/
case 0:
/* [47:36] i.e. 0x563 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
break;
case 1:
/* [46:35] i.e. 0xAC6 for above example address */
- hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
break;
case 2:
/* [45:34] i.e. 0x5D8 for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
break;
case 3:
/* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
break;
}
@@ -4361,9 +4369,9 @@ void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
/* HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
*/
- rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
- ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
- rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+ rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
/* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
* unit hang.
@@ -4537,7 +4545,7 @@ s32 e1000_setup_led(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- (u16) (hw->phy_spd_default &
+ (u16)(hw->phy_spd_default &
~IGP01E1000_GMII_SPD));
if (ret_val)
return ret_val;
@@ -4802,7 +4810,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
void e1000_update_adaptive(struct e1000_hw *hw)
{
if (hw->adaptive_ifs) {
- if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
+ if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
if (hw->tx_packet_delta > MIN_NUM_XMITS) {
hw->in_ifs_mode = true;
if (hw->current_ifs_val < hw->ifs_max_val) {
@@ -4816,8 +4824,8 @@ void e1000_update_adaptive(struct e1000_hw *hw)
}
}
} else {
- if (hw->in_ifs_mode
- && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ if (hw->in_ifs_mode &&
+ (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
hw->current_ifs_val = 0;
hw->in_ifs_mode = false;
ew32(AIT, 0);
@@ -4922,7 +4930,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
/* Use old method for Phy older than IGP */
if (hw->phy_type == e1000_phy_m88) {
-
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
&phy_data);
if (ret_val)
@@ -4966,7 +4973,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
};
/* Read the AGC registers for all channels */
for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
-
ret_val =
e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
if (ret_val)
@@ -4976,8 +4982,8 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
/* Value bound check. */
if ((cur_agc_value >=
- IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
- || (cur_agc_value == 0))
+ IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+ (cur_agc_value == 0))
return -E1000_ERR_PHY;
agc_value += cur_agc_value;
@@ -5054,7 +5060,6 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
*/
if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
IGP01E1000_PSSR_SPEED_1000MBPS) {
-
/* Read the GIG initialization PCS register (0x00B4) */
ret_val =
e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
@@ -5175,8 +5180,8 @@ static s32 e1000_1000Mb_check_cable_length(struct e1000_hw *hw)
hw->ffe_config_state = e1000_ffe_config_active;
ret_val = e1000_write_phy_reg(hw,
- IGP01E1000_PHY_DSP_FFE,
- IGP01E1000_PHY_DSP_FFE_CM_CP);
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
if (ret_val)
return ret_val;
break;
@@ -5243,7 +5248,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
msleep(20);
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
+ IGP01E1000_IEEE_FORCE_GIGA);
if (ret_val)
return ret_val;
for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
@@ -5264,7 +5269,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
}
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
+ IGP01E1000_IEEE_RESTART_AUTONEG);
if (ret_val)
return ret_val;
@@ -5299,7 +5304,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
msleep(20);
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
+ IGP01E1000_IEEE_FORCE_GIGA);
if (ret_val)
return ret_val;
ret_val =
@@ -5309,7 +5314,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
return ret_val;
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
+ IGP01E1000_IEEE_RESTART_AUTONEG);
if (ret_val)
return ret_val;
@@ -5346,9 +5351,8 @@ static s32 e1000_set_phy_mode(struct e1000_hw *hw)
ret_val =
e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
&eeprom_data);
- if (ret_val) {
+ if (ret_val)
return ret_val;
- }
if ((eeprom_data != EEPROM_RESERVED_WORD) &&
(eeprom_data & EEPROM_PHY_CLASS_A)) {
@@ -5395,8 +5399,8 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
* from the lowest speeds starting from 10Mbps. The capability is used
* for Dx transitions and states
*/
- if (hw->mac_type == e1000_82541_rev_2
- || hw->mac_type == e1000_82547_rev_2) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
ret_val =
e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
if (ret_val)
@@ -5446,11 +5450,9 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
if (ret_val)
return ret_val;
}
- } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
- || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
- || (hw->autoneg_advertised ==
- AUTONEG_ADVERTISE_10_100_ALL)) {
-
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
if (hw->mac_type == e1000_82541_rev_2 ||
hw->mac_type == e1000_82547_rev_2) {
phy_data |= IGP01E1000_GMII_FLEX_SPD;
@@ -5474,7 +5476,6 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
phy_data);
if (ret_val)
return ret_val;
-
}
return E1000_SUCCESS;
}
@@ -5542,7 +5543,6 @@ static s32 e1000_set_vco_speed(struct e1000_hw *hw)
return E1000_SUCCESS;
}
-
/**
* e1000_enable_mng_pass_thru - check for bmc pass through
* @hw: Struct containing variables accessed by shared code
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index fd7be860c..3fc7bde69 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -99,13 +99,13 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *txdr);
+ struct e1000_tx_ring *txdr);
static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rxdr);
+ struct e1000_rx_ring *rxdr);
static void e1000_free_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
+ struct e1000_tx_ring *tx_ring);
static void e1000_free_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
+ struct e1000_rx_ring *rx_ring);
void e1000_update_stats(struct e1000_adapter *adapter);
static int e1000_init_module(void);
@@ -122,16 +122,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter);
static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
+ struct e1000_tx_ring *tx_ring);
static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
+ struct e1000_rx_ring *rx_ring);
static void e1000_set_rx_mode(struct net_device *netdev);
static void e1000_update_phy_info_task(struct work_struct *work);
static void e1000_watchdog(struct work_struct *work);
static void e1000_82547_tx_fifo_stall_task(struct work_struct *work);
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev);
-static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev);
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
static irqreturn_t e1000_intr(int irq, void *data);
@@ -164,7 +164,7 @@ static void e1000_tx_timeout(struct net_device *dev);
static void e1000_reset_task(struct work_struct *work);
static void e1000_smartspeed(struct e1000_adapter *adapter);
static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
- struct sk_buff *skb);
+ struct sk_buff *skb);
static bool e1000_vlan_used(struct e1000_adapter *adapter);
static void e1000_vlan_mode(struct net_device *netdev,
@@ -195,7 +195,7 @@ MODULE_PARM_DESC(copybreak,
"Maximum size of packet that is copied to a new buffer on receive");
static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state);
+ pci_channel_state_t state);
static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
static void e1000_io_resume(struct pci_dev *pdev);
@@ -287,7 +287,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
int err;
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
- netdev);
+ netdev);
if (err) {
e_err(probe, "Unable to allocate interrupt Error: %d\n", err);
}
@@ -636,8 +636,8 @@ void e1000_reset(struct e1000_adapter *adapter)
* but don't include ethernet FCS because hardware appends it
*/
min_tx_space = (hw->max_frame_size +
- sizeof(struct e1000_tx_desc) -
- ETH_FCS_LEN) * 2;
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
min_tx_space = ALIGN(min_tx_space, 1024);
min_tx_space >>= 10;
/* software strips receive CRC, so leave room for it */
@@ -943,8 +943,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct e1000_adapter *adapter;
struct e1000_hw *hw;
- static int cards_found = 0;
- static int global_quad_port_a = 0; /* global ksp3 port a indication */
+ static int cards_found;
+ static int global_quad_port_a; /* global ksp3 port a indication */
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 tmp = 0;
@@ -1046,7 +1046,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (hw->mac_type == e1000_ce4100) {
hw->ce4100_gbe_mdio_base_virt =
ioremap(pci_resource_start(pdev, BAR_1),
- pci_resource_len(pdev, BAR_1));
+ pci_resource_len(pdev, BAR_1));
if (!hw->ce4100_gbe_mdio_base_virt)
goto err_mdio_ioremap;
@@ -1148,7 +1148,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
case e1000_82546:
case e1000_82546_rev_3:
- if (er32(STATUS) & E1000_STATUS_FUNC_1){
+ if (er32(STATUS) & E1000_STATUS_FUNC_1) {
e1000_read_eeprom(hw,
EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
break;
@@ -1199,13 +1199,13 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
for (i = 0; i < 32; i++) {
hw->phy_addr = i;
e1000_read_phy_reg(hw, PHY_ID2, &tmp);
- if (tmp == 0 || tmp == 0xFF) {
- if (i == 31)
- goto err_eeprom;
- continue;
- } else
+
+ if (tmp != 0 && tmp != 0xFF)
break;
}
+
+ if (i >= 32)
+ goto err_eeprom;
}
/* reset the hardware with the new settings */
@@ -1263,7 +1263,7 @@ err_pci_reg:
* @pdev: PCI device information struct
*
* e1000_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
+ * that it should release a PCI device. That could be caused by a
* Hot-Plug event, or because the driver is going to be removed from
* memory.
**/
@@ -1334,12 +1334,12 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
static int e1000_alloc_queues(struct e1000_adapter *adapter)
{
adapter->tx_ring = kcalloc(adapter->num_tx_queues,
- sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ sizeof(struct e1000_tx_ring), GFP_KERNEL);
if (!adapter->tx_ring)
return -ENOMEM;
adapter->rx_ring = kcalloc(adapter->num_rx_queues,
- sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ sizeof(struct e1000_rx_ring), GFP_KERNEL);
if (!adapter->rx_ring) {
kfree(adapter->tx_ring);
return -ENOMEM;
@@ -1811,20 +1811,20 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
switch (adapter->rx_buffer_len) {
- case E1000_RXBUFFER_2048:
- default:
- rctl |= E1000_RCTL_SZ_2048;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case E1000_RXBUFFER_4096:
- rctl |= E1000_RCTL_SZ_4096;
- break;
- case E1000_RXBUFFER_8192:
- rctl |= E1000_RCTL_SZ_8192;
- break;
- case E1000_RXBUFFER_16384:
- rctl |= E1000_RCTL_SZ_16384;
- break;
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
}
/* This is useful for sniffing bad packets. */
@@ -1861,12 +1861,12 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
if (adapter->netdev->mtu > ETH_DATA_LEN) {
rdlen = adapter->rx_ring[0].count *
- sizeof(struct e1000_rx_desc);
+ sizeof(struct e1000_rx_desc);
adapter->clean_rx = e1000_clean_jumbo_rx_irq;
adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
} else {
rdlen = adapter->rx_ring[0].count *
- sizeof(struct e1000_rx_desc);
+ sizeof(struct e1000_rx_desc);
adapter->clean_rx = e1000_clean_rx_irq;
adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
}
@@ -2761,7 +2761,9 @@ static int e1000_tso(struct e1000_adapter *adapter,
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
- if (++i == tx_ring->count) i = 0;
+ if (++i == tx_ring->count)
+ i = 0;
+
tx_ring->next_to_use = i;
return true;
@@ -2816,7 +2818,9 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter,
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
- if (unlikely(++i == tx_ring->count)) i = 0;
+ if (unlikely(++i == tx_ring->count))
+ i = 0;
+
tx_ring->next_to_use = i;
return true;
@@ -2865,8 +2869,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
* packet is smaller than 2048 - 16 - 16 (or 2016) bytes
*/
if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
- (size > 2015) && count == 0))
- size = 2015;
+ (size > 2015) && count == 0))
+ size = 2015;
/* Workaround for potential 82544 hang in PCI-X. Avoid
* terminating buffers within evenly-aligned dwords.
@@ -2963,7 +2967,7 @@ dma_error:
count--;
while (count--) {
- if (i==0)
+ if (i == 0)
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
@@ -3013,7 +3017,8 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
tx_desc->lower.data =
cpu_to_le32(txd_lower | buffer_info->length);
tx_desc->upper.data = cpu_to_le32(txd_upper);
- if (unlikely(++i == tx_ring->count)) i = 0;
+ if (unlikely(++i == tx_ring->count))
+ i = 0;
}
tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
@@ -3101,7 +3106,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev,
return __e1000_maybe_stop_tx(netdev, size);
}
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev)
{
@@ -3841,7 +3846,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_buffer *buffer_info;
unsigned int i, eop;
unsigned int count = 0;
- unsigned int total_tx_bytes=0, total_tx_packets=0;
+ unsigned int total_tx_bytes = 0, total_tx_packets = 0;
unsigned int bytes_compl = 0, pkts_compl = 0;
i = tx_ring->next_to_clean;
@@ -3869,14 +3874,18 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
tx_desc->upper.data = 0;
- if (unlikely(++i == tx_ring->count)) i = 0;
+ if (unlikely(++i == tx_ring->count))
+ i = 0;
}
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
}
- tx_ring->next_to_clean = i;
+ /* Synchronize with E1000_DESC_UNUSED called from e1000_xmit_frame,
+ * which will reuse the cleaned buffers.
+ */
+ smp_store_release(&tx_ring->next_to_clean, i);
netdev_completed_queue(netdev, pkts_compl, bytes_compl);
@@ -3954,9 +3963,11 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
skb_checksum_none_assert(skb);
/* 82543 or newer only */
- if (unlikely(hw->mac_type < e1000_82543)) return;
+ if (unlikely(hw->mac_type < e1000_82543))
+ return;
/* Ignore Checksum bit is set */
- if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ if (unlikely(status & E1000_RXD_STAT_IXSM))
+ return;
/* TCP/UDP checksum error bit is set */
if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
/* let the stack verify checksum errors */
@@ -4136,7 +4147,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -4153,7 +4164,9 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
status = rx_desc->status;
- if (++i == rx_ring->count) i = 0;
+ if (++i == rx_ring->count)
+ i = 0;
+
next_rxd = E1000_RX_DESC(*rx_ring, i);
prefetch(next_rxd);
@@ -4356,7 +4369,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -4395,7 +4408,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
buffer_info->rxbuf.data = NULL;
}
- if (++i == rx_ring->count) i = 0;
+ if (++i == rx_ring->count)
+ i = 0;
+
next_rxd = E1000_RX_DESC(*rx_ring, i);
prefetch(next_rxd);
@@ -4683,9 +4698,11 @@ static void e1000_smartspeed(struct e1000_adapter *adapter)
* we assume back-to-back
*/
e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
- if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT))
+ return;
e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
- if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT))
+ return;
e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
if (phy_ctrl & CR_1000T_MS_ENABLE) {
phy_ctrl &= ~CR_1000T_MS_ENABLE;