summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/myricom/myri10ge
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/myricom/myri10ge')
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/Makefile5
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge.c4279
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h435
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h60
4 files changed, 4779 insertions, 0 deletions
diff --git a/drivers/net/ethernet/myricom/myri10ge/Makefile b/drivers/net/ethernet/myricom/myri10ge/Makefile
new file mode 100644
index 000000000..5df891647
--- /dev/null
+++ b/drivers/net/ethernet/myricom/myri10ge/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Myricom Myri-10G ethernet driver
+#
+
+obj-$(CONFIG_MYRI10GE) += myri10ge.o
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
new file mode 100644
index 000000000..6478fcc4a
--- /dev/null
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
@@ -0,0 +1,4279 @@
+/*************************************************************************
+ * myri10ge.c: Myricom Myri-10G Ethernet driver.
+ *
+ * Copyright (C) 2005 - 2011 Myricom, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Myricom, Inc. nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * If the eeprom on your board is not recent enough, you will need to get a
+ * newer firmware image at:
+ * http://www.myri.com/scs/download-Myri10GE.html
+ *
+ * Contact Information:
+ * <help@myri.com>
+ * Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
+ *************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/tcp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/dca.h>
+#include <linux/ip.h>
+#include <linux/inet.h>
+#include <linux/in.h>
+#include <linux/ethtool.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/vmalloc.h>
+#include <linux/crc32.h>
+#include <linux/moduleparam.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/prefetch.h>
+#include <net/checksum.h>
+#include <net/ip.h>
+#include <net/tcp.h>
+#include <asm/byteorder.h>
+#include <asm/processor.h>
+#include <net/busy_poll.h>
+
+#include "myri10ge_mcp.h"
+#include "myri10ge_mcp_gen_header.h"
+
+#define MYRI10GE_VERSION_STR "1.5.3-1.534"
+
+MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
+MODULE_AUTHOR("Maintainer: help@myri.com");
+MODULE_VERSION(MYRI10GE_VERSION_STR);
+MODULE_LICENSE("Dual BSD/GPL");
+
+#define MYRI10GE_MAX_ETHER_MTU 9014
+
+#define MYRI10GE_ETH_STOPPED 0
+#define MYRI10GE_ETH_STOPPING 1
+#define MYRI10GE_ETH_STARTING 2
+#define MYRI10GE_ETH_RUNNING 3
+#define MYRI10GE_ETH_OPEN_FAILED 4
+
+#define MYRI10GE_EEPROM_STRINGS_SIZE 256
+#define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
+
+#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
+#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
+
+#define MYRI10GE_ALLOC_ORDER 0
+#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
+#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
+
+#define MYRI10GE_MAX_SLICES 32
+
+struct myri10ge_rx_buffer_state {
+ struct page *page;
+ int page_offset;
+ DEFINE_DMA_UNMAP_ADDR(bus);
+ DEFINE_DMA_UNMAP_LEN(len);
+};
+
+struct myri10ge_tx_buffer_state {
+ struct sk_buff *skb;
+ int last;
+ DEFINE_DMA_UNMAP_ADDR(bus);
+ DEFINE_DMA_UNMAP_LEN(len);
+};
+
+struct myri10ge_cmd {
+ u32 data0;
+ u32 data1;
+ u32 data2;
+};
+
+struct myri10ge_rx_buf {
+ struct mcp_kreq_ether_recv __iomem *lanai; /* lanai ptr for recv ring */
+ struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
+ struct myri10ge_rx_buffer_state *info;
+ struct page *page;
+ dma_addr_t bus;
+ int page_offset;
+ int cnt;
+ int fill_cnt;
+ int alloc_fail;
+ int mask; /* number of rx slots -1 */
+ int watchdog_needed;
+};
+
+struct myri10ge_tx_buf {
+ struct mcp_kreq_ether_send __iomem *lanai; /* lanai ptr for sendq */
+ __be32 __iomem *send_go; /* "go" doorbell ptr */
+ __be32 __iomem *send_stop; /* "stop" doorbell ptr */
+ struct mcp_kreq_ether_send *req_list; /* host shadow of sendq */
+ char *req_bytes;
+ struct myri10ge_tx_buffer_state *info;
+ int mask; /* number of transmit slots -1 */
+ int req ____cacheline_aligned; /* transmit slots submitted */
+ int pkt_start; /* packets started */
+ int stop_queue;
+ int linearized;
+ int done ____cacheline_aligned; /* transmit slots completed */
+ int pkt_done; /* packets completed */
+ int wake_queue;
+ int queue_active;
+};
+
+struct myri10ge_rx_done {
+ struct mcp_slot *entry;
+ dma_addr_t bus;
+ int cnt;
+ int idx;
+};
+
+struct myri10ge_slice_netstats {
+ unsigned long rx_packets;
+ unsigned long tx_packets;
+ unsigned long rx_bytes;
+ unsigned long tx_bytes;
+ unsigned long rx_dropped;
+ unsigned long tx_dropped;
+};
+
+struct myri10ge_slice_state {
+ struct myri10ge_tx_buf tx; /* transmit ring */
+ struct myri10ge_rx_buf rx_small;
+ struct myri10ge_rx_buf rx_big;
+ struct myri10ge_rx_done rx_done;
+ struct net_device *dev;
+ struct napi_struct napi;
+ struct myri10ge_priv *mgp;
+ struct myri10ge_slice_netstats stats;
+ __be32 __iomem *irq_claim;
+ struct mcp_irq_data *fw_stats;
+ dma_addr_t fw_stats_bus;
+ int watchdog_tx_done;
+ int watchdog_tx_req;
+ int watchdog_rx_done;
+ int stuck;
+#ifdef CONFIG_MYRI10GE_DCA
+ int cached_dca_tag;
+ int cpu;
+ __be32 __iomem *dca_tag;
+#endif
+#ifdef CONFIG_NET_RX_BUSY_POLL
+ unsigned int state;
+#define SLICE_STATE_IDLE 0
+#define SLICE_STATE_NAPI 1 /* NAPI owns this slice */
+#define SLICE_STATE_POLL 2 /* poll owns this slice */
+#define SLICE_LOCKED (SLICE_STATE_NAPI | SLICE_STATE_POLL)
+#define SLICE_STATE_NAPI_YIELD 4 /* NAPI yielded this slice */
+#define SLICE_STATE_POLL_YIELD 8 /* poll yielded this slice */
+#define SLICE_USER_PEND (SLICE_STATE_POLL | SLICE_STATE_POLL_YIELD)
+ spinlock_t lock;
+ unsigned long lock_napi_yield;
+ unsigned long lock_poll_yield;
+ unsigned long busy_poll_miss;
+ unsigned long busy_poll_cnt;
+#endif /* CONFIG_NET_RX_BUSY_POLL */
+ char irq_desc[32];
+};
+
+struct myri10ge_priv {
+ struct myri10ge_slice_state *ss;
+ int tx_boundary; /* boundary transmits cannot cross */
+ int num_slices;
+ int running; /* running? */
+ int small_bytes;
+ int big_bytes;
+ int max_intr_slots;
+ struct net_device *dev;
+ u8 __iomem *sram;
+ int sram_size;
+ unsigned long board_span;
+ unsigned long iomem_base;
+ __be32 __iomem *irq_deassert;
+ char *mac_addr_string;
+ struct mcp_cmd_response *cmd;
+ dma_addr_t cmd_bus;
+ struct pci_dev *pdev;
+ int msi_enabled;
+ int msix_enabled;
+ struct msix_entry *msix_vectors;
+#ifdef CONFIG_MYRI10GE_DCA
+ int dca_enabled;
+ int relaxed_order;
+#endif
+ u32 link_state;
+ unsigned int rdma_tags_available;
+ int intr_coal_delay;
+ __be32 __iomem *intr_coal_delay_ptr;
+ int wc_cookie;
+ int down_cnt;
+ wait_queue_head_t down_wq;
+ struct work_struct watchdog_work;
+ struct timer_list watchdog_timer;
+ int watchdog_resets;
+ int watchdog_pause;
+ int pause;
+ bool fw_name_allocated;
+ char *fw_name;
+ char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
+ char *product_code_string;
+ char fw_version[128];
+ int fw_ver_major;
+ int fw_ver_minor;
+ int fw_ver_tiny;
+ int adopted_rx_filter_bug;
+ u8 mac_addr[ETH_ALEN]; /* eeprom mac address */
+ unsigned long serial_number;
+ int vendor_specific_offset;
+ int fw_multicast_support;
+ u32 features;
+ u32 max_tso6;
+ u32 read_dma;
+ u32 write_dma;
+ u32 read_write_dma;
+ u32 link_changes;
+ u32 msg_enable;
+ unsigned int board_number;
+ int rebooted;
+};
+
+static char *myri10ge_fw_unaligned = "/*(DEBLOBBED)*/";
+static char *myri10ge_fw_aligned = "/*(DEBLOBBED)*/";
+static char *myri10ge_fw_rss_unaligned = "/*(DEBLOBBED)*/";
+static char *myri10ge_fw_rss_aligned = "/*(DEBLOBBED)*/";
+/*(DEBLOBBED)*/
+
+/* Careful: must be accessed under kparam_block_sysfs_write */
+static char *myri10ge_fw_name = NULL;
+module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
+
+#define MYRI10GE_MAX_BOARDS 8
+static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
+ {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
+module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
+ 0444);
+MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image names per board");
+
+static int myri10ge_ecrc_enable = 1;
+module_param(myri10ge_ecrc_enable, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
+
+static int myri10ge_small_bytes = -1; /* -1 == auto */
+module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
+
+static int myri10ge_msi = 1; /* enable msi by default */
+module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
+
+static int myri10ge_intr_coal_delay = 75;
+module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
+
+static int myri10ge_flow_control = 1;
+module_param(myri10ge_flow_control, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
+
+static int myri10ge_deassert_wait = 1;
+module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_deassert_wait,
+ "Wait when deasserting legacy interrupts");
+
+static int myri10ge_force_firmware = 0;
+module_param(myri10ge_force_firmware, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_force_firmware,
+ "Force firmware to assume aligned completions");
+
+static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
+module_param(myri10ge_initial_mtu, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
+
+static int myri10ge_napi_weight = 64;
+module_param(myri10ge_napi_weight, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
+
+static int myri10ge_watchdog_timeout = 1;
+module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
+
+static int myri10ge_max_irq_loops = 1048576;
+module_param(myri10ge_max_irq_loops, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_max_irq_loops,
+ "Set stuck legacy IRQ detection threshold");
+
+#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
+
+static int myri10ge_debug = -1; /* defaults above */
+module_param(myri10ge_debug, int, 0);
+MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
+
+static int myri10ge_fill_thresh = 256;
+module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
+
+static int myri10ge_reset_recover = 1;
+
+static int myri10ge_max_slices = 1;
+module_param(myri10ge_max_slices, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
+
+static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
+module_param(myri10ge_rss_hash, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
+
+static int myri10ge_dca = 1;
+module_param(myri10ge_dca, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
+
+#define MYRI10GE_FW_OFFSET 1024*1024
+#define MYRI10GE_HIGHPART_TO_U32(X) \
+(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
+#define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
+
+#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
+
+static void myri10ge_set_multicast_list(struct net_device *dev);
+static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
+ struct net_device *dev);
+
+static inline void put_be32(__be32 val, __be32 __iomem * p)
+{
+ __raw_writel((__force __u32) val, (__force void __iomem *)p);
+}
+
+static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
+ struct rtnl_link_stats64 *stats);
+
+static void set_fw_name(struct myri10ge_priv *mgp, char *name, bool allocated)
+{
+ if (mgp->fw_name_allocated)
+ kfree(mgp->fw_name);
+ mgp->fw_name = name;
+ mgp->fw_name_allocated = allocated;
+}
+
+static int
+myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
+ struct myri10ge_cmd *data, int atomic)
+{
+ struct mcp_cmd *buf;
+ char buf_bytes[sizeof(*buf) + 8];
+ struct mcp_cmd_response *response = mgp->cmd;
+ char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
+ u32 dma_low, dma_high, result, value;
+ int sleep_total = 0;
+
+ /* ensure buf is aligned to 8 bytes */
+ buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
+
+ buf->data0 = htonl(data->data0);
+ buf->data1 = htonl(data->data1);
+ buf->data2 = htonl(data->data2);
+ buf->cmd = htonl(cmd);
+ dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
+ dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
+
+ buf->response_addr.low = htonl(dma_low);
+ buf->response_addr.high = htonl(dma_high);
+ response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
+ mb();
+ myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
+
+ /* wait up to 15ms. Longest command is the DMA benchmark,
+ * which is capped at 5ms, but runs from a timeout handler
+ * that runs every 7.8ms. So a 15ms timeout leaves us with
+ * a 2.2ms margin
+ */
+ if (atomic) {
+ /* if atomic is set, do not sleep,
+ * and try to get the completion quickly
+ * (1ms will be enough for those commands) */
+ for (sleep_total = 0;
+ sleep_total < 1000 &&
+ response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
+ sleep_total += 10) {
+ udelay(10);
+ mb();
+ }
+ } else {
+ /* use msleep for most command */
+ for (sleep_total = 0;
+ sleep_total < 15 &&
+ response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
+ sleep_total++)
+ msleep(1);
+ }
+
+ result = ntohl(response->result);
+ value = ntohl(response->data);
+ if (result != MYRI10GE_NO_RESPONSE_RESULT) {
+ if (result == 0) {
+ data->data0 = value;
+ return 0;
+ } else if (result == MXGEFW_CMD_UNKNOWN) {
+ return -ENOSYS;
+ } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
+ return -E2BIG;
+ } else if (result == MXGEFW_CMD_ERROR_RANGE &&
+ cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
+ (data->
+ data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
+ 0) {
+ return -ERANGE;
+ } else {
+ dev_err(&mgp->pdev->dev,
+ "command %d failed, result = %d\n",
+ cmd, result);
+ return -ENXIO;
+ }
+ }
+
+ dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
+ cmd, result);
+ return -EAGAIN;
+}
+
+/*
+ * The eeprom strings on the lanaiX have the format
+ * SN=x\0
+ * MAC=x:x:x:x:x:x\0
+ * PT:ddd mmm xx xx:xx:xx xx\0
+ * PV:ddd mmm xx xx:xx:xx xx\0
+ */
+static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
+{
+ char *ptr, *limit;
+ int i;
+
+ ptr = mgp->eeprom_strings;
+ limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
+
+ while (*ptr != '\0' && ptr < limit) {
+ if (memcmp(ptr, "MAC=", 4) == 0) {
+ ptr += 4;
+ mgp->mac_addr_string = ptr;
+ for (i = 0; i < 6; i++) {
+ if ((ptr + 2) > limit)
+ goto abort;
+ mgp->mac_addr[i] =
+ simple_strtoul(ptr, &ptr, 16);
+ ptr += 1;
+ }
+ }
+ if (memcmp(ptr, "PC=", 3) == 0) {
+ ptr += 3;
+ mgp->product_code_string = ptr;
+ }
+ if (memcmp((const void *)ptr, "SN=", 3) == 0) {
+ ptr += 3;
+ mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
+ }
+ while (ptr < limit && *ptr++) ;
+ }
+
+ return 0;
+
+abort:
+ dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
+ return -ENXIO;
+}
+
+/*
+ * Enable or disable periodic RDMAs from the host to make certain
+ * chipsets resend dropped PCIe messages
+ */
+
+static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
+{
+ char __iomem *submit;
+ __be32 buf[16] __attribute__ ((__aligned__(8)));
+ u32 dma_low, dma_high;
+ int i;
+
+ /* clear confirmation addr */
+ mgp->cmd->data = 0;
+ mb();
+
+ /* send a rdma command to the PCIe engine, and wait for the
+ * response in the confirmation address. The firmware should
+ * write a -1 there to indicate it is alive and well
+ */
+ dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
+ dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
+
+ buf[0] = htonl(dma_high); /* confirm addr MSW */
+ buf[1] = htonl(dma_low); /* confirm addr LSW */
+ buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
+ buf[3] = htonl(dma_high); /* dummy addr MSW */
+ buf[4] = htonl(dma_low); /* dummy addr LSW */
+ buf[5] = htonl(enable); /* enable? */
+
+ submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
+
+ myri10ge_pio_copy(submit, &buf, sizeof(buf));
+ for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
+ msleep(1);
+ if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
+ dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
+ (enable ? "enable" : "disable"));
+}
+
+static int
+myri10ge_validate_firmware(struct myri10ge_priv *mgp,
+ struct mcp_gen_header *hdr)
+{
+ struct device *dev = &mgp->pdev->dev;
+
+ /* check firmware type */
+ if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
+ dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
+ return -EINVAL;
+ }
+
+ /* save firmware version for ethtool */
+ strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
+ mgp->fw_version[sizeof(mgp->fw_version) - 1] = '\0';
+
+ sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
+ &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
+
+ if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR &&
+ mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
+ dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
+ dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
+ MXGEFW_VERSION_MINOR);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
+{
+ unsigned crc, reread_crc;
+ const struct firmware *fw;
+ struct device *dev = &mgp->pdev->dev;
+ unsigned char *fw_readback;
+ struct mcp_gen_header *hdr;
+ size_t hdr_offset;
+ int status;
+ unsigned i;
+
+ if ((status = reject_firmware(&fw, mgp->fw_name, dev)) < 0) {
+ dev_err(dev, "Unable to load %s firmware image via hotplug\n",
+ mgp->fw_name);
+ status = -EINVAL;
+ goto abort_with_nothing;
+ }
+
+ /* check size */
+
+ if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
+ fw->size < MCP_HEADER_PTR_OFFSET + 4) {
+ dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
+ status = -EINVAL;
+ goto abort_with_fw;
+ }
+
+ /* check id */
+ hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
+ if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
+ dev_err(dev, "Bad firmware file\n");
+ status = -EINVAL;
+ goto abort_with_fw;
+ }
+ hdr = (void *)(fw->data + hdr_offset);
+
+ status = myri10ge_validate_firmware(mgp, hdr);
+ if (status != 0)
+ goto abort_with_fw;
+
+ crc = crc32(~0, fw->data, fw->size);
+ for (i = 0; i < fw->size; i += 256) {
+ myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
+ fw->data + i,
+ min(256U, (unsigned)(fw->size - i)));
+ mb();
+ readb(mgp->sram);
+ }
+ fw_readback = vmalloc(fw->size);
+ if (!fw_readback) {
+ status = -ENOMEM;
+ goto abort_with_fw;
+ }
+ /* corruption checking is good for parity recovery and buggy chipset */
+ memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
+ reread_crc = crc32(~0, fw_readback, fw->size);
+ vfree(fw_readback);
+ if (crc != reread_crc) {
+ dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
+ (unsigned)fw->size, reread_crc, crc);
+ status = -EIO;
+ goto abort_with_fw;
+ }
+ *size = (u32) fw->size;
+
+abort_with_fw:
+ release_firmware(fw);
+
+abort_with_nothing:
+ return status;
+}
+
+static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
+{
+ struct mcp_gen_header *hdr;
+ struct device *dev = &mgp->pdev->dev;
+ const size_t bytes = sizeof(struct mcp_gen_header);
+ size_t hdr_offset;
+ int status;
+
+ /* find running firmware header */
+ hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
+
+ if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
+ dev_err(dev, "Running firmware has bad header offset (%d)\n",
+ (int)hdr_offset);
+ return -EIO;
+ }
+
+ /* copy header of running firmware from SRAM to host memory to
+ * validate firmware */
+ hdr = kmalloc(bytes, GFP_KERNEL);
+ if (hdr == NULL)
+ return -ENOMEM;
+
+ memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
+ status = myri10ge_validate_firmware(mgp, hdr);
+ kfree(hdr);
+
+ /* check to see if adopted firmware has bug where adopting
+ * it will cause broadcasts to be filtered unless the NIC
+ * is kept in ALLMULTI mode */
+ if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
+ mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
+ mgp->adopted_rx_filter_bug = 1;
+ dev_warn(dev, "Adopting fw %d.%d.%d: "
+ "working around rx filter bug\n",
+ mgp->fw_ver_major, mgp->fw_ver_minor,
+ mgp->fw_ver_tiny);
+ }
+ return status;
+}
+
+static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_cmd cmd;
+ int status;
+
+ /* probe for IPv6 TSO support */
+ mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
+ &cmd, 0);
+ if (status == 0) {
+ mgp->max_tso6 = cmd.data0;
+ mgp->features |= NETIF_F_TSO6;
+ }
+
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev,
+ "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
+ return -ENXIO;
+ }
+
+ mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
+
+ return 0;
+}
+
+static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
+{
+ char __iomem *submit;
+ __be32 buf[16] __attribute__ ((__aligned__(8)));
+ u32 dma_low, dma_high, size;
+ int status, i;
+
+ size = 0;
+ status = myri10ge_load_hotplug_firmware(mgp, &size);
+ if (status) {
+ if (!adopt)
+ return status;
+ dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
+
+ /* Do not attempt to adopt firmware if there
+ * was a bad crc */
+ if (status == -EIO)
+ return status;
+
+ status = myri10ge_adopt_running_firmware(mgp);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev,
+ "failed to adopt running firmware\n");
+ return status;
+ }
+ dev_info(&mgp->pdev->dev,
+ "Successfully adopted running firmware\n");
+ if (mgp->tx_boundary == 4096) {
+ dev_warn(&mgp->pdev->dev,
+ "Using firmware currently running on NIC"
+ ". For optimal\n");
+ dev_warn(&mgp->pdev->dev,
+ "performance consider loading optimized "
+ "firmware\n");
+ dev_warn(&mgp->pdev->dev, "via hotplug\n");
+ }
+
+ set_fw_name(mgp, "adopted", false);
+ mgp->tx_boundary = 2048;
+ myri10ge_dummy_rdma(mgp, 1);
+ status = myri10ge_get_firmware_capabilities(mgp);
+ return status;
+ }
+
+ /* clear confirmation addr */
+ mgp->cmd->data = 0;
+ mb();
+
+ /* send a reload command to the bootstrap MCP, and wait for the
+ * response in the confirmation address. The firmware should
+ * write a -1 there to indicate it is alive and well
+ */
+ dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
+ dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
+
+ buf[0] = htonl(dma_high); /* confirm addr MSW */
+ buf[1] = htonl(dma_low); /* confirm addr LSW */
+ buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
+
+ /* FIX: All newest firmware should un-protect the bottom of
+ * the sram before handoff. However, the very first interfaces
+ * do not. Therefore the handoff copy must skip the first 8 bytes
+ */
+ buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
+ buf[4] = htonl(size - 8); /* length of code */
+ buf[5] = htonl(8); /* where to copy to */
+ buf[6] = htonl(0); /* where to jump to */
+
+ submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
+
+ myri10ge_pio_copy(submit, &buf, sizeof(buf));
+ mb();
+ msleep(1);
+ mb();
+ i = 0;
+ while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
+ msleep(1 << i);
+ i++;
+ }
+ if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
+ dev_err(&mgp->pdev->dev, "handoff failed\n");
+ return -ENXIO;
+ }
+ myri10ge_dummy_rdma(mgp, 1);
+ status = myri10ge_get_firmware_capabilities(mgp);
+
+ return status;
+}
+
+static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
+{
+ struct myri10ge_cmd cmd;
+ int status;
+
+ cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
+ | (addr[2] << 8) | addr[3]);
+
+ cmd.data1 = ((addr[4] << 8) | (addr[5]));
+
+ status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
+ return status;
+}
+
+static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
+{
+ struct myri10ge_cmd cmd;
+ int status, ctl;
+
+ ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
+ status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
+
+ if (status) {
+ netdev_err(mgp->dev, "Failed to set flow control mode\n");
+ return status;
+ }
+ mgp->pause = pause;
+ return 0;
+}
+
+static void
+myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
+{
+ struct myri10ge_cmd cmd;
+ int status, ctl;
+
+ ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
+ status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
+ if (status)
+ netdev_err(mgp->dev, "Failed to set promisc mode\n");
+}
+
+static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
+{
+ struct myri10ge_cmd cmd;
+ int status;
+ u32 len;
+ struct page *dmatest_page;
+ dma_addr_t dmatest_bus;
+ char *test = " ";
+
+ dmatest_page = alloc_page(GFP_KERNEL);
+ if (!dmatest_page)
+ return -ENOMEM;
+ dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
+ if (unlikely(pci_dma_mapping_error(mgp->pdev, dmatest_bus))) {
+ __free_page(dmatest_page);
+ return -ENOMEM;
+ }
+
+ /* Run a small DMA test.
+ * The magic multipliers to the length tell the firmware
+ * to do DMA read, write, or read+write tests. The
+ * results are returned in cmd.data0. The upper 16
+ * bits or the return is the number of transfers completed.
+ * The lower 16 bits is the time in 0.5us ticks that the
+ * transfers took to complete.
+ */
+
+ len = mgp->tx_boundary;
+
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x10000;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "read";
+ goto abort;
+ }
+ mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x1;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "write";
+ goto abort;
+ }
+ mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
+
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x10001;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "read/write";
+ goto abort;
+ }
+ mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
+ (cmd.data0 & 0xffff);
+
+abort:
+ pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
+ put_page(dmatest_page);
+
+ if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
+ dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
+ test, status);
+
+ return status;
+}
+
+#ifdef CONFIG_NET_RX_BUSY_POLL
+static inline void myri10ge_ss_init_lock(struct myri10ge_slice_state *ss)
+{
+ spin_lock_init(&ss->lock);
+ ss->state = SLICE_STATE_IDLE;
+}
+
+static inline bool myri10ge_ss_lock_napi(struct myri10ge_slice_state *ss)
+{
+ bool rc = true;
+ spin_lock(&ss->lock);
+ if ((ss->state & SLICE_LOCKED)) {
+ WARN_ON((ss->state & SLICE_STATE_NAPI));
+ ss->state |= SLICE_STATE_NAPI_YIELD;
+ rc = false;
+ ss->lock_napi_yield++;
+ } else
+ ss->state = SLICE_STATE_NAPI;
+ spin_unlock(&ss->lock);
+ return rc;
+}
+
+static inline void myri10ge_ss_unlock_napi(struct myri10ge_slice_state *ss)
+{
+ spin_lock(&ss->lock);
+ WARN_ON((ss->state & (SLICE_STATE_POLL | SLICE_STATE_NAPI_YIELD)));
+ ss->state = SLICE_STATE_IDLE;
+ spin_unlock(&ss->lock);
+}
+
+static inline bool myri10ge_ss_lock_poll(struct myri10ge_slice_state *ss)
+{
+ bool rc = true;
+ spin_lock_bh(&ss->lock);
+ if ((ss->state & SLICE_LOCKED)) {
+ ss->state |= SLICE_STATE_POLL_YIELD;
+ rc = false;
+ ss->lock_poll_yield++;
+ } else
+ ss->state |= SLICE_STATE_POLL;
+ spin_unlock_bh(&ss->lock);
+ return rc;
+}
+
+static inline void myri10ge_ss_unlock_poll(struct myri10ge_slice_state *ss)
+{
+ spin_lock_bh(&ss->lock);
+ WARN_ON((ss->state & SLICE_STATE_NAPI));
+ ss->state = SLICE_STATE_IDLE;
+ spin_unlock_bh(&ss->lock);
+}
+
+static inline bool myri10ge_ss_busy_polling(struct myri10ge_slice_state *ss)
+{
+ WARN_ON(!(ss->state & SLICE_LOCKED));
+ return (ss->state & SLICE_USER_PEND);
+}
+#else /* CONFIG_NET_RX_BUSY_POLL */
+static inline void myri10ge_ss_init_lock(struct myri10ge_slice_state *ss)
+{
+}
+
+static inline bool myri10ge_ss_lock_napi(struct myri10ge_slice_state *ss)
+{
+ return false;
+}
+
+static inline void myri10ge_ss_unlock_napi(struct myri10ge_slice_state *ss)
+{
+}
+
+static inline bool myri10ge_ss_lock_poll(struct myri10ge_slice_state *ss)
+{
+ return false;
+}
+
+static inline void myri10ge_ss_unlock_poll(struct myri10ge_slice_state *ss)
+{
+}
+
+static inline bool myri10ge_ss_busy_polling(struct myri10ge_slice_state *ss)
+{
+ return false;
+}
+#endif
+
+static int myri10ge_reset(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_cmd cmd;
+ struct myri10ge_slice_state *ss;
+ int i, status;
+ size_t bytes;
+#ifdef CONFIG_MYRI10GE_DCA
+ unsigned long dca_tag_off;
+#endif
+
+ /* try to send a reset command to the card to see if it
+ * is alive */
+ memset(&cmd, 0, sizeof(cmd));
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed reset\n");
+ return -ENXIO;
+ }
+
+ (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
+ /*
+ * Use non-ndis mcp_slot (eg, 4 bytes total,
+ * no toeplitz hash value returned. Older firmware will
+ * not understand this command, but will use the correct
+ * sized mcp_slot, so we ignore error returns
+ */
+ cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
+ (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
+
+ /* Now exchange information about interrupts */
+
+ bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
+ cmd.data0 = (u32) bytes;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
+
+ /*
+ * Even though we already know how many slices are supported
+ * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
+ * has magic side effects, and must be called after a reset.
+ * It must be called prior to calling any RSS related cmds,
+ * including assigning an interrupt queue for anything but
+ * slice 0. It must also be called *after*
+ * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
+ * the firmware to compute offsets.
+ */
+
+ if (mgp->num_slices > 1) {
+
+ /* ask the maximum number of slices it supports */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
+ &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev,
+ "failed to get number of slices\n");
+ }
+
+ /*
+ * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
+ * to setting up the interrupt queue DMA
+ */
+
+ cmd.data0 = mgp->num_slices;
+ cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
+ if (mgp->dev->real_num_tx_queues > 1)
+ cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
+ &cmd, 0);
+
+ /* Firmware older than 1.4.32 only supports multiple
+ * RX queues, so if we get an error, first retry using a
+ * single TX queue before giving up */
+ if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
+ netif_set_real_num_tx_queues(mgp->dev, 1);
+ cmd.data0 = mgp->num_slices;
+ cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
+ status = myri10ge_send_cmd(mgp,
+ MXGEFW_CMD_ENABLE_RSS_QUEUES,
+ &cmd, 0);
+ }
+
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev,
+ "failed to set number of slices\n");
+
+ return status;
+ }
+ }
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
+ cmd.data2 = i;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
+ &cmd, 0);
+ }
+
+ status |=
+ myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ ss->irq_claim =
+ (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
+ }
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
+ &cmd, 0);
+ mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
+
+ status |= myri10ge_send_cmd
+ (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
+ mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
+ return status;
+ }
+ put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
+
+#ifdef CONFIG_MYRI10GE_DCA
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
+ dca_tag_off = cmd.data0;
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ if (status == 0) {
+ ss->dca_tag = (__iomem __be32 *)
+ (mgp->sram + dca_tag_off + 4 * i);
+ } else {
+ ss->dca_tag = NULL;
+ }
+ }
+#endif /* CONFIG_MYRI10GE_DCA */
+
+ /* reset mcp/driver shared state back to 0 */
+
+ mgp->link_changes = 0;
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+
+ memset(ss->rx_done.entry, 0, bytes);
+ ss->tx.req = 0;
+ ss->tx.done = 0;
+ ss->tx.pkt_start = 0;
+ ss->tx.pkt_done = 0;
+ ss->rx_big.cnt = 0;
+ ss->rx_small.cnt = 0;
+ ss->rx_done.idx = 0;
+ ss->rx_done.cnt = 0;
+ ss->tx.wake_queue = 0;
+ ss->tx.stop_queue = 0;
+ }
+
+ status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
+ myri10ge_change_pause(mgp, mgp->pause);
+ myri10ge_set_multicast_list(mgp->dev);
+ return status;
+}
+
+#ifdef CONFIG_MYRI10GE_DCA
+static int myri10ge_toggle_relaxed(struct pci_dev *pdev, int on)
+{
+ int ret;
+ u16 ctl;
+
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &ctl);
+
+ ret = (ctl & PCI_EXP_DEVCTL_RELAX_EN) >> 4;
+ if (ret != on) {
+ ctl &= ~PCI_EXP_DEVCTL_RELAX_EN;
+ ctl |= (on << 4);
+ pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, ctl);
+ }
+ return ret;
+}
+
+static void
+myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
+{
+ ss->cached_dca_tag = tag;
+ put_be32(htonl(tag), ss->dca_tag);
+}
+
+static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
+{
+ int cpu = get_cpu();
+ int tag;
+
+ if (cpu != ss->cpu) {
+ tag = dca3_get_tag(&ss->mgp->pdev->dev, cpu);
+ if (ss->cached_dca_tag != tag)
+ myri10ge_write_dca(ss, cpu, tag);
+ ss->cpu = cpu;
+ }
+ put_cpu();
+}
+
+static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
+{
+ int err, i;
+ struct pci_dev *pdev = mgp->pdev;
+
+ if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
+ return;
+ if (!myri10ge_dca) {
+ dev_err(&pdev->dev, "dca disabled by administrator\n");
+ return;
+ }
+ err = dca_add_requester(&pdev->dev);
+ if (err) {
+ if (err != -ENODEV)
+ dev_err(&pdev->dev,
+ "dca_add_requester() failed, err=%d\n", err);
+ return;
+ }
+ mgp->relaxed_order = myri10ge_toggle_relaxed(pdev, 0);
+ mgp->dca_enabled = 1;
+ for (i = 0; i < mgp->num_slices; i++) {
+ mgp->ss[i].cpu = -1;
+ mgp->ss[i].cached_dca_tag = -1;
+ myri10ge_update_dca(&mgp->ss[i]);
+ }
+}
+
+static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+
+ if (!mgp->dca_enabled)
+ return;
+ mgp->dca_enabled = 0;
+ if (mgp->relaxed_order)
+ myri10ge_toggle_relaxed(pdev, 1);
+ dca_remove_requester(&pdev->dev);
+}
+
+static int myri10ge_notify_dca_device(struct device *dev, void *data)
+{
+ struct myri10ge_priv *mgp;
+ unsigned long event;
+
+ mgp = dev_get_drvdata(dev);
+ event = *(unsigned long *)data;
+
+ if (event == DCA_PROVIDER_ADD)
+ myri10ge_setup_dca(mgp);
+ else if (event == DCA_PROVIDER_REMOVE)
+ myri10ge_teardown_dca(mgp);
+ return 0;
+}
+#endif /* CONFIG_MYRI10GE_DCA */
+
+static inline void
+myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
+ struct mcp_kreq_ether_recv *src)
+{
+ __be32 low;
+
+ low = src->addr_low;
+ src->addr_low = htonl(DMA_BIT_MASK(32));
+ myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
+ mb();
+ myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
+ mb();
+ src->addr_low = low;
+ put_be32(low, &dst->addr_low);
+ mb();
+}
+
+static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
+{
+ struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
+
+ if ((skb->protocol == htons(ETH_P_8021Q)) &&
+ (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
+ vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
+ skb->csum = hw_csum;
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+}
+
+static void
+myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
+ int bytes, int watchdog)
+{
+ struct page *page;
+ dma_addr_t bus;
+ int idx;
+#if MYRI10GE_ALLOC_SIZE > 4096
+ int end_offset;
+#endif
+
+ if (unlikely(rx->watchdog_needed && !watchdog))
+ return;
+
+ /* try to refill entire ring */
+ while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
+ idx = rx->fill_cnt & rx->mask;
+ if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
+ /* we can use part of previous page */
+ get_page(rx->page);
+ } else {
+ /* we need a new page */
+ page =
+ alloc_pages(GFP_ATOMIC | __GFP_COMP,
+ MYRI10GE_ALLOC_ORDER);
+ if (unlikely(page == NULL)) {
+ if (rx->fill_cnt - rx->cnt < 16)
+ rx->watchdog_needed = 1;
+ return;
+ }
+
+ bus = pci_map_page(mgp->pdev, page, 0,
+ MYRI10GE_ALLOC_SIZE,
+ PCI_DMA_FROMDEVICE);
+ if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
+ __free_pages(page, MYRI10GE_ALLOC_ORDER);
+ if (rx->fill_cnt - rx->cnt < 16)
+ rx->watchdog_needed = 1;
+ return;
+ }
+
+ rx->page = page;
+ rx->page_offset = 0;
+ rx->bus = bus;
+
+ }
+ rx->info[idx].page = rx->page;
+ rx->info[idx].page_offset = rx->page_offset;
+ /* note that this is the address of the start of the
+ * page */
+ dma_unmap_addr_set(&rx->info[idx], bus, rx->bus);
+ rx->shadow[idx].addr_low =
+ htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
+ rx->shadow[idx].addr_high =
+ htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
+
+ /* start next packet on a cacheline boundary */
+ rx->page_offset += SKB_DATA_ALIGN(bytes);
+
+#if MYRI10GE_ALLOC_SIZE > 4096
+ /* don't cross a 4KB boundary */
+ end_offset = rx->page_offset + bytes - 1;
+ if ((unsigned)(rx->page_offset ^ end_offset) > 4095)
+ rx->page_offset = end_offset & ~4095;
+#endif
+ rx->fill_cnt++;
+
+ /* copy 8 descriptors to the firmware at a time */
+ if ((idx & 7) == 7) {
+ myri10ge_submit_8rx(&rx->lanai[idx - 7],
+ &rx->shadow[idx - 7]);
+ }
+ }
+}
+
+static inline void
+myri10ge_unmap_rx_page(struct pci_dev *pdev,
+ struct myri10ge_rx_buffer_state *info, int bytes)
+{
+ /* unmap the recvd page if we're the only or last user of it */
+ if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
+ (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
+ pci_unmap_page(pdev, (dma_unmap_addr(info, bus)
+ & ~(MYRI10GE_ALLOC_SIZE - 1)),
+ MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ }
+}
+
+/*
+ * GRO does not support acceleration of tagged vlan frames, and
+ * this NIC does not support vlan tag offload, so we must pop
+ * the tag ourselves to be able to achieve GRO performance that
+ * is comparable to LRO.
+ */
+
+static inline void
+myri10ge_vlan_rx(struct net_device *dev, void *addr, struct sk_buff *skb)
+{
+ u8 *va;
+ struct vlan_ethhdr *veh;
+ struct skb_frag_struct *frag;
+ __wsum vsum;
+
+ va = addr;
+ va += MXGEFW_PAD;
+ veh = (struct vlan_ethhdr *)va;
+ if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) ==
+ NETIF_F_HW_VLAN_CTAG_RX &&
+ veh->h_vlan_proto == htons(ETH_P_8021Q)) {
+ /* fixup csum if needed */
+ if (skb->ip_summed == CHECKSUM_COMPLETE) {
+ vsum = csum_partial(va + ETH_HLEN, VLAN_HLEN, 0);
+ skb->csum = csum_sub(skb->csum, vsum);
+ }
+ /* pop tag */
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(veh->h_vlan_TCI));
+ memmove(va + VLAN_HLEN, va, 2 * ETH_ALEN);
+ skb->len -= VLAN_HLEN;
+ skb->data_len -= VLAN_HLEN;
+ frag = skb_shinfo(skb)->frags;
+ frag->page_offset += VLAN_HLEN;
+ skb_frag_size_set(frag, skb_frag_size(frag) - VLAN_HLEN);
+ }
+}
+
+#define MYRI10GE_HLEN 64 /* Bytes to copy from page to skb linear memory */
+
+static inline int
+myri10ge_rx_done(struct myri10ge_slice_state *ss, int len, __wsum csum)
+{
+ struct myri10ge_priv *mgp = ss->mgp;
+ struct sk_buff *skb;
+ struct skb_frag_struct *rx_frags;
+ struct myri10ge_rx_buf *rx;
+ int i, idx, remainder, bytes;
+ struct pci_dev *pdev = mgp->pdev;
+ struct net_device *dev = mgp->dev;
+ u8 *va;
+ bool polling;
+
+ if (len <= mgp->small_bytes) {
+ rx = &ss->rx_small;
+ bytes = mgp->small_bytes;
+ } else {
+ rx = &ss->rx_big;
+ bytes = mgp->big_bytes;
+ }
+
+ len += MXGEFW_PAD;
+ idx = rx->cnt & rx->mask;
+ va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
+ prefetch(va);
+
+ /* When busy polling in user context, allocate skb and copy headers to
+ * skb's linear memory ourselves. When not busy polling, use the napi
+ * gro api.
+ */
+ polling = myri10ge_ss_busy_polling(ss);
+ if (polling)
+ skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
+ else
+ skb = napi_get_frags(&ss->napi);
+ if (unlikely(skb == NULL)) {
+ ss->stats.rx_dropped++;
+ for (i = 0, remainder = len; remainder > 0; i++) {
+ myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
+ put_page(rx->info[idx].page);
+ rx->cnt++;
+ idx = rx->cnt & rx->mask;
+ remainder -= MYRI10GE_ALLOC_SIZE;
+ }
+ return 0;
+ }
+ rx_frags = skb_shinfo(skb)->frags;
+ /* Fill skb_frag_struct(s) with data from our receive */
+ for (i = 0, remainder = len; remainder > 0; i++) {
+ myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
+ skb_fill_page_desc(skb, i, rx->info[idx].page,
+ rx->info[idx].page_offset,
+ remainder < MYRI10GE_ALLOC_SIZE ?
+ remainder : MYRI10GE_ALLOC_SIZE);
+ rx->cnt++;
+ idx = rx->cnt & rx->mask;
+ remainder -= MYRI10GE_ALLOC_SIZE;
+ }
+
+ /* remove padding */
+ rx_frags[0].page_offset += MXGEFW_PAD;
+ rx_frags[0].size -= MXGEFW_PAD;
+ len -= MXGEFW_PAD;
+
+ skb->len = len;
+ skb->data_len = len;
+ skb->truesize += len;
+ if (dev->features & NETIF_F_RXCSUM) {
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ skb->csum = csum;
+ }
+ myri10ge_vlan_rx(mgp->dev, va, skb);
+ skb_record_rx_queue(skb, ss - &mgp->ss[0]);
+ skb_mark_napi_id(skb, &ss->napi);
+
+ if (polling) {
+ int hlen;
+
+ /* myri10ge_vlan_rx might have moved the header, so compute
+ * length and address again.
+ */
+ hlen = MYRI10GE_HLEN > skb->len ? skb->len : MYRI10GE_HLEN;
+ va = page_address(skb_frag_page(&rx_frags[0])) +
+ rx_frags[0].page_offset;
+ /* Copy header into the skb linear memory */
+ skb_copy_to_linear_data(skb, va, hlen);
+ rx_frags[0].page_offset += hlen;
+ rx_frags[0].size -= hlen;
+ skb->data_len -= hlen;
+ skb->tail += hlen;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_receive_skb(skb);
+ }
+ else
+ napi_gro_frags(&ss->napi);
+
+ return 1;
+}
+
+static inline void
+myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
+{
+ struct pci_dev *pdev = ss->mgp->pdev;
+ struct myri10ge_tx_buf *tx = &ss->tx;
+ struct netdev_queue *dev_queue;
+ struct sk_buff *skb;
+ int idx, len;
+
+ while (tx->pkt_done != mcp_index) {
+ idx = tx->done & tx->mask;
+ skb = tx->info[idx].skb;
+
+ /* Mark as free */
+ tx->info[idx].skb = NULL;
+ if (tx->info[idx].last) {
+ tx->pkt_done++;
+ tx->info[idx].last = 0;
+ }
+ tx->done++;
+ len = dma_unmap_len(&tx->info[idx], len);
+ dma_unmap_len_set(&tx->info[idx], len, 0);
+ if (skb) {
+ ss->stats.tx_bytes += skb->len;
+ ss->stats.tx_packets++;
+ dev_kfree_skb_irq(skb);
+ if (len)
+ pci_unmap_single(pdev,
+ dma_unmap_addr(&tx->info[idx],
+ bus), len,
+ PCI_DMA_TODEVICE);
+ } else {
+ if (len)
+ pci_unmap_page(pdev,
+ dma_unmap_addr(&tx->info[idx],
+ bus), len,
+ PCI_DMA_TODEVICE);
+ }
+ }
+
+ dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
+ /*
+ * Make a minimal effort to prevent the NIC from polling an
+ * idle tx queue. If we can't get the lock we leave the queue
+ * active. In this case, either a thread was about to start
+ * using the queue anyway, or we lost a race and the NIC will
+ * waste some of its resources polling an inactive queue for a
+ * while.
+ */
+
+ if ((ss->mgp->dev->real_num_tx_queues > 1) &&
+ __netif_tx_trylock(dev_queue)) {
+ if (tx->req == tx->done) {
+ tx->queue_active = 0;
+ put_be32(htonl(1), tx->send_stop);
+ mb();
+ mmiowb();
+ }
+ __netif_tx_unlock(dev_queue);
+ }
+
+ /* start the queue if we've stopped it */
+ if (netif_tx_queue_stopped(dev_queue) &&
+ tx->req - tx->done < (tx->mask >> 1) &&
+ ss->mgp->running == MYRI10GE_ETH_RUNNING) {
+ tx->wake_queue++;
+ netif_tx_wake_queue(dev_queue);
+ }
+}
+
+static inline int
+myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
+{
+ struct myri10ge_rx_done *rx_done = &ss->rx_done;
+ struct myri10ge_priv *mgp = ss->mgp;
+ unsigned long rx_bytes = 0;
+ unsigned long rx_packets = 0;
+ unsigned long rx_ok;
+ int idx = rx_done->idx;
+ int cnt = rx_done->cnt;
+ int work_done = 0;
+ u16 length;
+ __wsum checksum;
+
+ while (rx_done->entry[idx].length != 0 && work_done < budget) {
+ length = ntohs(rx_done->entry[idx].length);
+ rx_done->entry[idx].length = 0;
+ checksum = csum_unfold(rx_done->entry[idx].checksum);
+ rx_ok = myri10ge_rx_done(ss, length, checksum);
+ rx_packets += rx_ok;
+ rx_bytes += rx_ok * (unsigned long)length;
+ cnt++;
+ idx = cnt & (mgp->max_intr_slots - 1);
+ work_done++;
+ }
+ rx_done->idx = idx;
+ rx_done->cnt = cnt;
+ ss->stats.rx_packets += rx_packets;
+ ss->stats.rx_bytes += rx_bytes;
+
+ /* restock receive rings if needed */
+ if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 0);
+ if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
+
+ return work_done;
+}
+
+static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
+{
+ struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
+
+ if (unlikely(stats->stats_updated)) {
+ unsigned link_up = ntohl(stats->link_up);
+ if (mgp->link_state != link_up) {
+ mgp->link_state = link_up;
+
+ if (mgp->link_state == MXGEFW_LINK_UP) {
+ netif_info(mgp, link, mgp->dev, "link up\n");
+ netif_carrier_on(mgp->dev);
+ mgp->link_changes++;
+ } else {
+ netif_info(mgp, link, mgp->dev, "link %s\n",
+ (link_up == MXGEFW_LINK_MYRINET ?
+ "mismatch (Myrinet detected)" :
+ "down"));
+ netif_carrier_off(mgp->dev);
+ mgp->link_changes++;
+ }
+ }
+ if (mgp->rdma_tags_available !=
+ ntohl(stats->rdma_tags_available)) {
+ mgp->rdma_tags_available =
+ ntohl(stats->rdma_tags_available);
+ netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
+ mgp->rdma_tags_available);
+ }
+ mgp->down_cnt += stats->link_down;
+ if (stats->link_down)
+ wake_up(&mgp->down_wq);
+ }
+}
+
+static int myri10ge_poll(struct napi_struct *napi, int budget)
+{
+ struct myri10ge_slice_state *ss =
+ container_of(napi, struct myri10ge_slice_state, napi);
+ int work_done;
+
+#ifdef CONFIG_MYRI10GE_DCA
+ if (ss->mgp->dca_enabled)
+ myri10ge_update_dca(ss);
+#endif
+ /* Try later if the busy_poll handler is running. */
+ if (!myri10ge_ss_lock_napi(ss))
+ return budget;
+
+ /* process as many rx events as NAPI will allow */
+ work_done = myri10ge_clean_rx_done(ss, budget);
+
+ myri10ge_ss_unlock_napi(ss);
+ if (work_done < budget) {
+ napi_complete(napi);
+ put_be32(htonl(3), ss->irq_claim);
+ }
+ return work_done;
+}
+
+#ifdef CONFIG_NET_RX_BUSY_POLL
+static int myri10ge_busy_poll(struct napi_struct *napi)
+{
+ struct myri10ge_slice_state *ss =
+ container_of(napi, struct myri10ge_slice_state, napi);
+ struct myri10ge_priv *mgp = ss->mgp;
+ int work_done;
+
+ /* Poll only when the link is up */
+ if (mgp->link_state != MXGEFW_LINK_UP)
+ return LL_FLUSH_FAILED;
+
+ if (!myri10ge_ss_lock_poll(ss))
+ return LL_FLUSH_BUSY;
+
+ /* Process a small number of packets */
+ work_done = myri10ge_clean_rx_done(ss, 4);
+ if (work_done)
+ ss->busy_poll_cnt += work_done;
+ else
+ ss->busy_poll_miss++;
+
+ myri10ge_ss_unlock_poll(ss);
+
+ return work_done;
+}
+#endif /* CONFIG_NET_RX_BUSY_POLL */
+
+static irqreturn_t myri10ge_intr(int irq, void *arg)
+{
+ struct myri10ge_slice_state *ss = arg;
+ struct myri10ge_priv *mgp = ss->mgp;
+ struct mcp_irq_data *stats = ss->fw_stats;
+ struct myri10ge_tx_buf *tx = &ss->tx;
+ u32 send_done_count;
+ int i;
+
+ /* an interrupt on a non-zero receive-only slice is implicitly
+ * valid since MSI-X irqs are not shared */
+ if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
+ napi_schedule(&ss->napi);
+ return IRQ_HANDLED;
+ }
+
+ /* make sure it is our IRQ, and that the DMA has finished */
+ if (unlikely(!stats->valid))
+ return IRQ_NONE;
+
+ /* low bit indicates receives are present, so schedule
+ * napi poll handler */
+ if (stats->valid & 1)
+ napi_schedule(&ss->napi);
+
+ if (!mgp->msi_enabled && !mgp->msix_enabled) {
+ put_be32(0, mgp->irq_deassert);
+ if (!myri10ge_deassert_wait)
+ stats->valid = 0;
+ mb();
+ } else
+ stats->valid = 0;
+
+ /* Wait for IRQ line to go low, if using INTx */
+ i = 0;
+ while (1) {
+ i++;
+ /* check for transmit completes and receives */
+ send_done_count = ntohl(stats->send_done_count);
+ if (send_done_count != tx->pkt_done)
+ myri10ge_tx_done(ss, (int)send_done_count);
+ if (unlikely(i > myri10ge_max_irq_loops)) {
+ netdev_warn(mgp->dev, "irq stuck?\n");
+ stats->valid = 0;
+ schedule_work(&mgp->watchdog_work);
+ }
+ if (likely(stats->valid == 0))
+ break;
+ cpu_relax();
+ barrier();
+ }
+
+ /* Only slice 0 updates stats */
+ if (ss == mgp->ss)
+ myri10ge_check_statblock(mgp);
+
+ put_be32(htonl(3), ss->irq_claim + 1);
+ return IRQ_HANDLED;
+}
+
+static int
+myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ char *ptr;
+ int i;
+
+ cmd->autoneg = AUTONEG_DISABLE;
+ ethtool_cmd_speed_set(cmd, SPEED_10000);
+ cmd->duplex = DUPLEX_FULL;
+
+ /*
+ * parse the product code to deterimine the interface type
+ * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
+ * after the 3rd dash in the driver's cached copy of the
+ * EEPROM's product code string.
+ */
+ ptr = mgp->product_code_string;
+ if (ptr == NULL) {
+ netdev_err(netdev, "Missing product code\n");
+ return 0;
+ }
+ for (i = 0; i < 3; i++, ptr++) {
+ ptr = strchr(ptr, '-');
+ if (ptr == NULL) {
+ netdev_err(netdev, "Invalid product code %s\n",
+ mgp->product_code_string);
+ return 0;
+ }
+ }
+ if (*ptr == '2')
+ ptr++;
+ if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
+ /* We've found either an XFP, quad ribbon fiber, or SFP+ */
+ cmd->port = PORT_FIBRE;
+ cmd->supported |= SUPPORTED_FIBRE;
+ cmd->advertising |= ADVERTISED_FIBRE;
+ } else {
+ cmd->port = PORT_OTHER;
+ }
+ if (*ptr == 'R' || *ptr == 'S')
+ cmd->transceiver = XCVR_EXTERNAL;
+ else
+ cmd->transceiver = XCVR_INTERNAL;
+
+ return 0;
+}
+
+static void
+myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
+ strlcpy(info->driver, "myri10ge", sizeof(info->driver));
+ strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
+ strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
+ strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
+}
+
+static int
+myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
+ coal->rx_coalesce_usecs = mgp->intr_coal_delay;
+ return 0;
+}
+
+static int
+myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
+ mgp->intr_coal_delay = coal->rx_coalesce_usecs;
+ put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
+ return 0;
+}
+
+static void
+myri10ge_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
+ pause->autoneg = 0;
+ pause->rx_pause = mgp->pause;
+ pause->tx_pause = mgp->pause;
+}
+
+static int
+myri10ge_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
+ if (pause->tx_pause != mgp->pause)
+ return myri10ge_change_pause(mgp, pause->tx_pause);
+ if (pause->rx_pause != mgp->pause)
+ return myri10ge_change_pause(mgp, pause->rx_pause);
+ if (pause->autoneg != 0)
+ return -EINVAL;
+ return 0;
+}
+
+static void
+myri10ge_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
+ ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
+ ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
+ ring->rx_jumbo_max_pending = 0;
+ ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
+ ring->rx_mini_pending = ring->rx_mini_max_pending;
+ ring->rx_pending = ring->rx_max_pending;
+ ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
+ ring->tx_pending = ring->tx_max_pending;
+}
+
+static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
+ "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+ "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+ "rx_length_errors", "rx_over_errors", "rx_crc_errors",
+ "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+ "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+ "tx_heartbeat_errors", "tx_window_errors",
+ /* device-specific stats */
+ "tx_boundary", "irq", "MSI", "MSIX",
+ "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
+ "serial_number", "watchdog_resets",
+#ifdef CONFIG_MYRI10GE_DCA
+ "dca_capable_firmware", "dca_device_present",
+#endif
+ "link_changes", "link_up", "dropped_link_overflow",
+ "dropped_link_error_or_filtered",
+ "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
+ "dropped_unicast_filtered", "dropped_multicast_filtered",
+ "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
+ "dropped_no_big_buffer"
+};
+
+static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
+ "----------- slice ---------",
+ "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
+ "rx_small_cnt", "rx_big_cnt",
+ "wake_queue", "stop_queue", "tx_linearized",
+#ifdef CONFIG_NET_RX_BUSY_POLL
+ "rx_lock_napi_yield", "rx_lock_poll_yield", "rx_busy_poll_miss",
+ "rx_busy_poll_cnt",
+#endif
+};
+
+#define MYRI10GE_NET_STATS_LEN 21
+#define MYRI10GE_MAIN_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_main_stats)
+#define MYRI10GE_SLICE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_slice_stats)
+
+static void
+myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ memcpy(data, *myri10ge_gstrings_main_stats,
+ sizeof(myri10ge_gstrings_main_stats));
+ data += sizeof(myri10ge_gstrings_main_stats);
+ for (i = 0; i < mgp->num_slices; i++) {
+ memcpy(data, *myri10ge_gstrings_slice_stats,
+ sizeof(myri10ge_gstrings_slice_stats));
+ data += sizeof(myri10ge_gstrings_slice_stats);
+ }
+ break;
+ }
+}
+
+static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
+ switch (sset) {
+ case ETH_SS_STATS:
+ return MYRI10GE_MAIN_STATS_LEN +
+ mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void
+myri10ge_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 * data)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ struct myri10ge_slice_state *ss;
+ struct rtnl_link_stats64 link_stats;
+ int slice;
+ int i;
+
+ /* force stats update */
+ memset(&link_stats, 0, sizeof(link_stats));
+ (void)myri10ge_get_stats(netdev, &link_stats);
+ for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
+ data[i] = ((u64 *)&link_stats)[i];
+
+ data[i++] = (unsigned int)mgp->tx_boundary;
+ data[i++] = (unsigned int)mgp->pdev->irq;
+ data[i++] = (unsigned int)mgp->msi_enabled;
+ data[i++] = (unsigned int)mgp->msix_enabled;
+ data[i++] = (unsigned int)mgp->read_dma;
+ data[i++] = (unsigned int)mgp->write_dma;
+ data[i++] = (unsigned int)mgp->read_write_dma;
+ data[i++] = (unsigned int)mgp->serial_number;
+ data[i++] = (unsigned int)mgp->watchdog_resets;
+#ifdef CONFIG_MYRI10GE_DCA
+ data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
+ data[i++] = (unsigned int)(mgp->dca_enabled);
+#endif
+ data[i++] = (unsigned int)mgp->link_changes;
+
+ /* firmware stats are useful only in the first slice */
+ ss = &mgp->ss[0];
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
+ data[i++] =
+ (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
+ data[i++] =
+ (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
+
+ for (slice = 0; slice < mgp->num_slices; slice++) {
+ ss = &mgp->ss[slice];
+ data[i++] = slice;
+ data[i++] = (unsigned int)ss->tx.pkt_start;
+ data[i++] = (unsigned int)ss->tx.pkt_done;
+ data[i++] = (unsigned int)ss->tx.req;
+ data[i++] = (unsigned int)ss->tx.done;
+ data[i++] = (unsigned int)ss->rx_small.cnt;
+ data[i++] = (unsigned int)ss->rx_big.cnt;
+ data[i++] = (unsigned int)ss->tx.wake_queue;
+ data[i++] = (unsigned int)ss->tx.stop_queue;
+ data[i++] = (unsigned int)ss->tx.linearized;
+#ifdef CONFIG_NET_RX_BUSY_POLL
+ data[i++] = ss->lock_napi_yield;
+ data[i++] = ss->lock_poll_yield;
+ data[i++] = ss->busy_poll_miss;
+ data[i++] = ss->busy_poll_cnt;
+#endif
+ }
+}
+
+static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ mgp->msg_enable = value;
+}
+
+static u32 myri10ge_get_msglevel(struct net_device *netdev)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ return mgp->msg_enable;
+}
+
+/*
+ * Use a low-level command to change the LED behavior. Rather than
+ * blinking (which is the normal case), when identify is used, the
+ * yellow LED turns solid.
+ */
+static int myri10ge_led(struct myri10ge_priv *mgp, int on)
+{
+ struct mcp_gen_header *hdr;
+ struct device *dev = &mgp->pdev->dev;
+ size_t hdr_off, pattern_off, hdr_len;
+ u32 pattern = 0xfffffffe;
+
+ /* find running firmware header */
+ hdr_off = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
+ if ((hdr_off & 3) || hdr_off + sizeof(*hdr) > mgp->sram_size) {
+ dev_err(dev, "Running firmware has bad header offset (%d)\n",
+ (int)hdr_off);
+ return -EIO;
+ }
+ hdr_len = swab32(readl(mgp->sram + hdr_off +
+ offsetof(struct mcp_gen_header, header_length)));
+ pattern_off = hdr_off + offsetof(struct mcp_gen_header, led_pattern);
+ if (pattern_off >= (hdr_len + hdr_off)) {
+ dev_info(dev, "Firmware does not support LED identification\n");
+ return -EINVAL;
+ }
+ if (!on)
+ pattern = swab32(readl(mgp->sram + pattern_off + 4));
+ writel(swab32(pattern), mgp->sram + pattern_off);
+ return 0;
+}
+
+static int
+myri10ge_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
+{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ int rc;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ rc = myri10ge_led(mgp, 1);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ rc = myri10ge_led(mgp, 0);
+ break;
+
+ default:
+ rc = -EINVAL;
+ }
+
+ return rc;
+}
+
+static const struct ethtool_ops myri10ge_ethtool_ops = {
+ .get_settings = myri10ge_get_settings,
+ .get_drvinfo = myri10ge_get_drvinfo,
+ .get_coalesce = myri10ge_get_coalesce,
+ .set_coalesce = myri10ge_set_coalesce,
+ .get_pauseparam = myri10ge_get_pauseparam,
+ .set_pauseparam = myri10ge_set_pauseparam,
+ .get_ringparam = myri10ge_get_ringparam,
+ .get_link = ethtool_op_get_link,
+ .get_strings = myri10ge_get_strings,
+ .get_sset_count = myri10ge_get_sset_count,
+ .get_ethtool_stats = myri10ge_get_ethtool_stats,
+ .set_msglevel = myri10ge_set_msglevel,
+ .get_msglevel = myri10ge_get_msglevel,
+ .set_phys_id = myri10ge_phys_id,
+};
+
+static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
+{
+ struct myri10ge_priv *mgp = ss->mgp;
+ struct myri10ge_cmd cmd;
+ struct net_device *dev = mgp->dev;
+ int tx_ring_size, rx_ring_size;
+ int tx_ring_entries, rx_ring_entries;
+ int i, slice, status;
+ size_t bytes;
+
+ /* get ring sizes */
+ slice = ss - mgp->ss;
+ cmd.data0 = slice;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
+ tx_ring_size = cmd.data0;
+ cmd.data0 = slice;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
+ if (status != 0)
+ return status;
+ rx_ring_size = cmd.data0;
+
+ tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
+ rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
+ ss->tx.mask = tx_ring_entries - 1;
+ ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
+
+ status = -ENOMEM;
+
+ /* allocate the host shadow rings */
+
+ bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
+ * sizeof(*ss->tx.req_list);
+ ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
+ if (ss->tx.req_bytes == NULL)
+ goto abort_with_nothing;
+
+ /* ensure req_list entries are aligned to 8 bytes */
+ ss->tx.req_list = (struct mcp_kreq_ether_send *)
+ ALIGN((unsigned long)ss->tx.req_bytes, 8);
+ ss->tx.queue_active = 0;
+
+ bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
+ ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_small.shadow == NULL)
+ goto abort_with_tx_req_bytes;
+
+ bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
+ ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_big.shadow == NULL)
+ goto abort_with_rx_small_shadow;
+
+ /* allocate the host info rings */
+
+ bytes = tx_ring_entries * sizeof(*ss->tx.info);
+ ss->tx.info = kzalloc(bytes, GFP_KERNEL);
+ if (ss->tx.info == NULL)
+ goto abort_with_rx_big_shadow;
+
+ bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
+ ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_small.info == NULL)
+ goto abort_with_tx_info;
+
+ bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
+ ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_big.info == NULL)
+ goto abort_with_rx_small_info;
+
+ /* Fill the receive rings */
+ ss->rx_big.cnt = 0;
+ ss->rx_small.cnt = 0;
+ ss->rx_big.fill_cnt = 0;
+ ss->rx_small.fill_cnt = 0;
+ ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
+ ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
+ ss->rx_small.watchdog_needed = 0;
+ ss->rx_big.watchdog_needed = 0;
+ if (mgp->small_bytes == 0) {
+ ss->rx_small.fill_cnt = ss->rx_small.mask + 1;
+ } else {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 0);
+ }
+
+ if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
+ netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
+ slice, ss->rx_small.fill_cnt);
+ goto abort_with_rx_small_ring;
+ }
+
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
+ if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
+ netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
+ slice, ss->rx_big.fill_cnt);
+ goto abort_with_rx_big_ring;
+ }
+
+ return 0;
+
+abort_with_rx_big_ring:
+ for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
+ int idx = i & ss->rx_big.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
+ mgp->big_bytes);
+ put_page(ss->rx_big.info[idx].page);
+ }
+
+abort_with_rx_small_ring:
+ if (mgp->small_bytes == 0)
+ ss->rx_small.fill_cnt = ss->rx_small.cnt;
+ for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
+ int idx = i & ss->rx_small.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
+ mgp->small_bytes + MXGEFW_PAD);
+ put_page(ss->rx_small.info[idx].page);
+ }
+
+ kfree(ss->rx_big.info);
+
+abort_with_rx_small_info:
+ kfree(ss->rx_small.info);
+
+abort_with_tx_info:
+ kfree(ss->tx.info);
+
+abort_with_rx_big_shadow:
+ kfree(ss->rx_big.shadow);
+
+abort_with_rx_small_shadow:
+ kfree(ss->rx_small.shadow);
+
+abort_with_tx_req_bytes:
+ kfree(ss->tx.req_bytes);
+ ss->tx.req_bytes = NULL;
+ ss->tx.req_list = NULL;
+
+abort_with_nothing:
+ return status;
+}
+
+static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
+{
+ struct myri10ge_priv *mgp = ss->mgp;
+ struct sk_buff *skb;
+ struct myri10ge_tx_buf *tx;
+ int i, len, idx;
+
+ /* If not allocated, skip it */
+ if (ss->tx.req_list == NULL)
+ return;
+
+ for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
+ idx = i & ss->rx_big.mask;
+ if (i == ss->rx_big.fill_cnt - 1)
+ ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
+ mgp->big_bytes);
+ put_page(ss->rx_big.info[idx].page);
+ }
+
+ if (mgp->small_bytes == 0)
+ ss->rx_small.fill_cnt = ss->rx_small.cnt;
+ for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
+ idx = i & ss->rx_small.mask;
+ if (i == ss->rx_small.fill_cnt - 1)
+ ss->rx_small.info[idx].page_offset =
+ MYRI10GE_ALLOC_SIZE;
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
+ mgp->small_bytes + MXGEFW_PAD);
+ put_page(ss->rx_small.info[idx].page);
+ }
+ tx = &ss->tx;
+ while (tx->done != tx->req) {
+ idx = tx->done & tx->mask;
+ skb = tx->info[idx].skb;
+
+ /* Mark as free */
+ tx->info[idx].skb = NULL;
+ tx->done++;
+ len = dma_unmap_len(&tx->info[idx], len);
+ dma_unmap_len_set(&tx->info[idx], len, 0);
+ if (skb) {
+ ss->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+ if (len)
+ pci_unmap_single(mgp->pdev,
+ dma_unmap_addr(&tx->info[idx],
+ bus), len,
+ PCI_DMA_TODEVICE);
+ } else {
+ if (len)
+ pci_unmap_page(mgp->pdev,
+ dma_unmap_addr(&tx->info[idx],
+ bus), len,
+ PCI_DMA_TODEVICE);
+ }
+ }
+ kfree(ss->rx_big.info);
+
+ kfree(ss->rx_small.info);
+
+ kfree(ss->tx.info);
+
+ kfree(ss->rx_big.shadow);
+
+ kfree(ss->rx_small.shadow);
+
+ kfree(ss->tx.req_bytes);
+ ss->tx.req_bytes = NULL;
+ ss->tx.req_list = NULL;
+}
+
+static int myri10ge_request_irq(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+ struct myri10ge_slice_state *ss;
+ struct net_device *netdev = mgp->dev;
+ int i;
+ int status;
+
+ mgp->msi_enabled = 0;
+ mgp->msix_enabled = 0;
+ status = 0;
+ if (myri10ge_msi) {
+ if (mgp->num_slices > 1) {
+ status = pci_enable_msix_range(pdev, mgp->msix_vectors,
+ mgp->num_slices, mgp->num_slices);
+ if (status < 0) {
+ dev_err(&pdev->dev,
+ "Error %d setting up MSI-X\n", status);
+ return status;
+ }
+ mgp->msix_enabled = 1;
+ }
+ if (mgp->msix_enabled == 0) {
+ status = pci_enable_msi(pdev);
+ if (status != 0) {
+ dev_err(&pdev->dev,
+ "Error %d setting up MSI; falling back to xPIC\n",
+ status);
+ } else {
+ mgp->msi_enabled = 1;
+ }
+ }
+ }
+ if (mgp->msix_enabled) {
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ snprintf(ss->irq_desc, sizeof(ss->irq_desc),
+ "%s:slice-%d", netdev->name, i);
+ status = request_irq(mgp->msix_vectors[i].vector,
+ myri10ge_intr, 0, ss->irq_desc,
+ ss);
+ if (status != 0) {
+ dev_err(&pdev->dev,
+ "slice %d failed to allocate IRQ\n", i);
+ i--;
+ while (i >= 0) {
+ free_irq(mgp->msix_vectors[i].vector,
+ &mgp->ss[i]);
+ i--;
+ }
+ pci_disable_msix(pdev);
+ return status;
+ }
+ }
+ } else {
+ status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
+ mgp->dev->name, &mgp->ss[0]);
+ if (status != 0) {
+ dev_err(&pdev->dev, "failed to allocate IRQ\n");
+ if (mgp->msi_enabled)
+ pci_disable_msi(pdev);
+ }
+ }
+ return status;
+}
+
+static void myri10ge_free_irq(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+ int i;
+
+ if (mgp->msix_enabled) {
+ for (i = 0; i < mgp->num_slices; i++)
+ free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
+ } else {
+ free_irq(pdev->irq, &mgp->ss[0]);
+ }
+ if (mgp->msi_enabled)
+ pci_disable_msi(pdev);
+ if (mgp->msix_enabled)
+ pci_disable_msix(pdev);
+}
+
+static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
+{
+ struct myri10ge_cmd cmd;
+ struct myri10ge_slice_state *ss;
+ int status;
+
+ ss = &mgp->ss[slice];
+ status = 0;
+ if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
+ cmd.data0 = slice;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
+ &cmd, 0);
+ ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
+ (mgp->sram + cmd.data0);
+ }
+ cmd.data0 = slice;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
+ &cmd, 0);
+ ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
+ (mgp->sram + cmd.data0);
+
+ cmd.data0 = slice;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
+ ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
+ (mgp->sram + cmd.data0);
+
+ ss->tx.send_go = (__iomem __be32 *)
+ (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
+ ss->tx.send_stop = (__iomem __be32 *)
+ (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
+ return status;
+
+}
+
+static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
+{
+ struct myri10ge_cmd cmd;
+ struct myri10ge_slice_state *ss;
+ int status;
+
+ ss = &mgp->ss[slice];
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
+ cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
+ if (status == -ENOSYS) {
+ dma_addr_t bus = ss->fw_stats_bus;
+ if (slice != 0)
+ return -EINVAL;
+ bus += offsetof(struct mcp_irq_data, send_done_count);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
+ status = myri10ge_send_cmd(mgp,
+ MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
+ &cmd, 0);
+ /* Firmware cannot support multicast without STATS_DMA_V2 */
+ mgp->fw_multicast_support = 0;
+ } else {
+ mgp->fw_multicast_support = 1;
+ }
+ return 0;
+}
+
+static int myri10ge_open(struct net_device *dev)
+{
+ struct myri10ge_slice_state *ss;
+ struct myri10ge_priv *mgp = netdev_priv(dev);
+ struct myri10ge_cmd cmd;
+ int i, status, big_pow2, slice;
+ u8 __iomem *itable;
+
+ if (mgp->running != MYRI10GE_ETH_STOPPED)
+ return -EBUSY;
+
+ mgp->running = MYRI10GE_ETH_STARTING;
+ status = myri10ge_reset(mgp);
+ if (status != 0) {
+ netdev_err(dev, "failed reset\n");
+ goto abort_with_nothing;
+ }
+
+ if (mgp->num_slices > 1) {
+ cmd.data0 = mgp->num_slices;
+ cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
+ if (mgp->dev->real_num_tx_queues > 1)
+ cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
+ &cmd, 0);
+ if (status != 0) {
+ netdev_err(dev, "failed to set number of slices\n");
+ goto abort_with_nothing;
+ }
+ /* setup the indirection table */
+ cmd.data0 = mgp->num_slices;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
+ &cmd, 0);
+
+ status |= myri10ge_send_cmd(mgp,
+ MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
+ &cmd, 0);
+ if (status != 0) {
+ netdev_err(dev, "failed to setup rss tables\n");
+ goto abort_with_nothing;
+ }
+
+ /* just enable an identity mapping */
+ itable = mgp->sram + cmd.data0;
+ for (i = 0; i < mgp->num_slices; i++)
+ __raw_writeb(i, &itable[i]);
+
+ cmd.data0 = 1;
+ cmd.data1 = myri10ge_rss_hash;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
+ &cmd, 0);
+ if (status != 0) {
+ netdev_err(dev, "failed to enable slices\n");
+ goto abort_with_nothing;
+ }
+ }
+
+ status = myri10ge_request_irq(mgp);
+ if (status != 0)
+ goto abort_with_nothing;
+
+ /* decide what small buffer size to use. For good TCP rx
+ * performance, it is important to not receive 1514 byte
+ * frames into jumbo buffers, as it confuses the socket buffer
+ * accounting code, leading to drops and erratic performance.
+ */
+
+ if (dev->mtu <= ETH_DATA_LEN)
+ /* enough for a TCP header */
+ mgp->small_bytes = (128 > SMP_CACHE_BYTES)
+ ? (128 - MXGEFW_PAD)
+ : (SMP_CACHE_BYTES - MXGEFW_PAD);
+ else
+ /* enough for a vlan encapsulated ETH_DATA_LEN frame */
+ mgp->small_bytes = VLAN_ETH_FRAME_LEN;
+
+ /* Override the small buffer size? */
+ if (myri10ge_small_bytes >= 0)
+ mgp->small_bytes = myri10ge_small_bytes;
+
+ /* Firmware needs the big buff size as a power of 2. Lie and
+ * tell him the buffer is larger, because we only use 1
+ * buffer/pkt, and the mtu will prevent overruns.
+ */
+ big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
+ if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
+ while (!is_power_of_2(big_pow2))
+ big_pow2++;
+ mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
+ } else {
+ big_pow2 = MYRI10GE_ALLOC_SIZE;
+ mgp->big_bytes = big_pow2;
+ }
+
+ /* setup the per-slice data structures */
+ for (slice = 0; slice < mgp->num_slices; slice++) {
+ ss = &mgp->ss[slice];
+
+ status = myri10ge_get_txrx(mgp, slice);
+ if (status != 0) {
+ netdev_err(dev, "failed to get ring sizes or locations\n");
+ goto abort_with_rings;
+ }
+ status = myri10ge_allocate_rings(ss);
+ if (status != 0)
+ goto abort_with_rings;
+
+ /* only firmware which supports multiple TX queues
+ * supports setting up the tx stats on non-zero
+ * slices */
+ if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
+ status = myri10ge_set_stats(mgp, slice);
+ if (status) {
+ netdev_err(dev, "Couldn't set stats DMA\n");
+ goto abort_with_rings;
+ }
+
+ /* Initialize the slice spinlock and state used for polling */
+ myri10ge_ss_init_lock(ss);
+
+ /* must happen prior to any irq */
+ napi_enable(&(ss)->napi);
+ }
+
+ /* now give firmware buffers sizes, and MTU */
+ cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
+ cmd.data0 = mgp->small_bytes;
+ status |=
+ myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
+ cmd.data0 = big_pow2;
+ status |=
+ myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
+ if (status) {
+ netdev_err(dev, "Couldn't set buffer sizes\n");
+ goto abort_with_rings;
+ }
+
+ /*
+ * Set Linux style TSO mode; this is needed only on newer
+ * firmware versions. Older versions default to Linux
+ * style TSO
+ */
+ cmd.data0 = 0;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
+ if (status && status != -ENOSYS) {
+ netdev_err(dev, "Couldn't set TSO mode\n");
+ goto abort_with_rings;
+ }
+
+ mgp->link_state = ~0U;
+ mgp->rdma_tags_available = 15;
+
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
+ if (status) {
+ netdev_err(dev, "Couldn't bring up link\n");
+ goto abort_with_rings;
+ }
+
+ mgp->running = MYRI10GE_ETH_RUNNING;
+ mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
+ add_timer(&mgp->watchdog_timer);
+ netif_tx_wake_all_queues(dev);
+
+ return 0;
+
+abort_with_rings:
+ while (slice) {
+ slice--;
+ napi_disable(&mgp->ss[slice].napi);
+ }
+ for (i = 0; i < mgp->num_slices; i++)
+ myri10ge_free_rings(&mgp->ss[i]);
+
+ myri10ge_free_irq(mgp);
+
+abort_with_nothing:
+ mgp->running = MYRI10GE_ETH_STOPPED;
+ return -ENOMEM;
+}
+
+static int myri10ge_close(struct net_device *dev)
+{
+ struct myri10ge_priv *mgp = netdev_priv(dev);
+ struct myri10ge_cmd cmd;
+ int status, old_down_cnt;
+ int i;
+
+ if (mgp->running != MYRI10GE_ETH_RUNNING)
+ return 0;
+
+ if (mgp->ss[0].tx.req_bytes == NULL)
+ return 0;
+
+ del_timer_sync(&mgp->watchdog_timer);
+ mgp->running = MYRI10GE_ETH_STOPPING;
+ local_bh_disable(); /* myri10ge_ss_lock_napi needs bh disabled */
+ for (i = 0; i < mgp->num_slices; i++) {
+ napi_disable(&mgp->ss[i].napi);
+ /* Lock the slice to prevent the busy_poll handler from
+ * accessing it. Later when we bring the NIC up, myri10ge_open
+ * resets the slice including this lock.
+ */
+ while (!myri10ge_ss_lock_napi(&mgp->ss[i])) {
+ pr_info("Slice %d locked\n", i);
+ mdelay(1);
+ }
+ }
+ local_bh_enable();
+ netif_carrier_off(dev);
+
+ netif_tx_stop_all_queues(dev);
+ if (mgp->rebooted == 0) {
+ old_down_cnt = mgp->down_cnt;
+ mb();
+ status =
+ myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
+ if (status)
+ netdev_err(dev, "Couldn't bring down link\n");
+
+ wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
+ HZ);
+ if (old_down_cnt == mgp->down_cnt)
+ netdev_err(dev, "never got down irq\n");
+ }
+ netif_tx_disable(dev);
+ myri10ge_free_irq(mgp);
+ for (i = 0; i < mgp->num_slices; i++)
+ myri10ge_free_rings(&mgp->ss[i]);
+
+ mgp->running = MYRI10GE_ETH_STOPPED;
+ return 0;
+}
+
+/* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
+ * backwards one at a time and handle ring wraps */
+
+static inline void
+myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
+ struct mcp_kreq_ether_send *src, int cnt)
+{
+ int idx, starting_slot;
+ starting_slot = tx->req;
+ while (cnt > 1) {
+ cnt--;
+ idx = (starting_slot + cnt) & tx->mask;
+ myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
+ mb();
+ }
+}
+
+/*
+ * copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
+ * at most 32 bytes at a time, so as to avoid involving the software
+ * pio handler in the nic. We re-write the first segment's flags
+ * to mark them valid only after writing the entire chain.
+ */
+
+static inline void
+myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
+ int cnt)
+{
+ int idx, i;
+ struct mcp_kreq_ether_send __iomem *dstp, *dst;
+ struct mcp_kreq_ether_send *srcp;
+ u8 last_flags;
+
+ idx = tx->req & tx->mask;
+
+ last_flags = src->flags;
+ src->flags = 0;
+ mb();
+ dst = dstp = &tx->lanai[idx];
+ srcp = src;
+
+ if ((idx + cnt) < tx->mask) {
+ for (i = 0; i < (cnt - 1); i += 2) {
+ myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
+ mb(); /* force write every 32 bytes */
+ srcp += 2;
+ dstp += 2;
+ }
+ } else {
+ /* submit all but the first request, and ensure
+ * that it is submitted below */
+ myri10ge_submit_req_backwards(tx, src, cnt);
+ i = 0;
+ }
+ if (i < cnt) {
+ /* submit the first request */
+ myri10ge_pio_copy(dstp, srcp, sizeof(*src));
+ mb(); /* barrier before setting valid flag */
+ }
+
+ /* re-write the last 32-bits with the valid flags */
+ src->flags = last_flags;
+ put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
+ tx->req += cnt;
+ mb();
+}
+
+static void myri10ge_unmap_tx_dma(struct myri10ge_priv *mgp,
+ struct myri10ge_tx_buf *tx, int idx)
+{
+ unsigned int len;
+ int last_idx;
+
+ /* Free any DMA resources we've alloced and clear out the skb slot */
+ last_idx = (idx + 1) & tx->mask;
+ idx = tx->req & tx->mask;
+ do {
+ len = dma_unmap_len(&tx->info[idx], len);
+ if (len) {
+ if (tx->info[idx].skb != NULL)
+ pci_unmap_single(mgp->pdev,
+ dma_unmap_addr(&tx->info[idx],
+ bus), len,
+ PCI_DMA_TODEVICE);
+ else
+ pci_unmap_page(mgp->pdev,
+ dma_unmap_addr(&tx->info[idx],
+ bus), len,
+ PCI_DMA_TODEVICE);
+ dma_unmap_len_set(&tx->info[idx], len, 0);
+ tx->info[idx].skb = NULL;
+ }
+ idx = (idx + 1) & tx->mask;
+ } while (idx != last_idx);
+}
+
+/*
+ * Transmit a packet. We need to split the packet so that a single
+ * segment does not cross myri10ge->tx_boundary, so this makes segment
+ * counting tricky. So rather than try to count segments up front, we
+ * just give up if there are too few segments to hold a reasonably
+ * fragmented packet currently available. If we run
+ * out of segments while preparing a packet for DMA, we just linearize
+ * it and try again.
+ */
+
+static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct myri10ge_priv *mgp = netdev_priv(dev);
+ struct myri10ge_slice_state *ss;
+ struct mcp_kreq_ether_send *req;
+ struct myri10ge_tx_buf *tx;
+ struct skb_frag_struct *frag;
+ struct netdev_queue *netdev_queue;
+ dma_addr_t bus;
+ u32 low;
+ __be32 high_swapped;
+ unsigned int len;
+ int idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
+ u16 pseudo_hdr_offset, cksum_offset, queue;
+ int cum_len, seglen, boundary, rdma_count;
+ u8 flags, odd_flag;
+
+ queue = skb_get_queue_mapping(skb);
+ ss = &mgp->ss[queue];
+ netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
+ tx = &ss->tx;
+
+again:
+ req = tx->req_list;
+ avail = tx->mask - 1 - (tx->req - tx->done);
+
+ mss = 0;
+ max_segments = MXGEFW_MAX_SEND_DESC;
+
+ if (skb_is_gso(skb)) {
+ mss = skb_shinfo(skb)->gso_size;
+ max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
+ }
+
+ if ((unlikely(avail < max_segments))) {
+ /* we are out of transmit resources */
+ tx->stop_queue++;
+ netif_tx_stop_queue(netdev_queue);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* Setup checksum offloading, if needed */
+ cksum_offset = 0;
+ pseudo_hdr_offset = 0;
+ odd_flag = 0;
+ flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+ cksum_offset = skb_checksum_start_offset(skb);
+ pseudo_hdr_offset = cksum_offset + skb->csum_offset;
+ /* If the headers are excessively large, then we must
+ * fall back to a software checksum */
+ if (unlikely(!mss && (cksum_offset > 255 ||
+ pseudo_hdr_offset > 127))) {
+ if (skb_checksum_help(skb))
+ goto drop;
+ cksum_offset = 0;
+ pseudo_hdr_offset = 0;
+ } else {
+ odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
+ flags |= MXGEFW_FLAGS_CKSUM;
+ }
+ }
+
+ cum_len = 0;
+
+ if (mss) { /* TSO */
+ /* this removes any CKSUM flag from before */
+ flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
+
+ /* negative cum_len signifies to the
+ * send loop that we are still in the
+ * header portion of the TSO packet.
+ * TSO header can be at most 1KB long */
+ cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
+
+ /* for IPv6 TSO, the checksum offset stores the
+ * TCP header length, to save the firmware from
+ * the need to parse the headers */
+ if (skb_is_gso_v6(skb)) {
+ cksum_offset = tcp_hdrlen(skb);
+ /* Can only handle headers <= max_tso6 long */
+ if (unlikely(-cum_len > mgp->max_tso6))
+ return myri10ge_sw_tso(skb, dev);
+ }
+ /* for TSO, pseudo_hdr_offset holds mss.
+ * The firmware figures out where to put
+ * the checksum by parsing the header. */
+ pseudo_hdr_offset = mss;
+ } else
+ /* Mark small packets, and pad out tiny packets */
+ if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
+ flags |= MXGEFW_FLAGS_SMALL;
+
+ /* pad frames to at least ETH_ZLEN bytes */
+ if (eth_skb_pad(skb)) {
+ /* The packet is gone, so we must
+ * return 0 */
+ ss->stats.tx_dropped += 1;
+ return NETDEV_TX_OK;
+ }
+ }
+
+ /* map the skb for DMA */
+ len = skb_headlen(skb);
+ bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
+ if (unlikely(pci_dma_mapping_error(mgp->pdev, bus)))
+ goto drop;
+
+ idx = tx->req & tx->mask;
+ tx->info[idx].skb = skb;
+ dma_unmap_addr_set(&tx->info[idx], bus, bus);
+ dma_unmap_len_set(&tx->info[idx], len, len);
+
+ frag_cnt = skb_shinfo(skb)->nr_frags;
+ frag_idx = 0;
+ count = 0;
+ rdma_count = 0;
+
+ /* "rdma_count" is the number of RDMAs belonging to the
+ * current packet BEFORE the current send request. For
+ * non-TSO packets, this is equal to "count".
+ * For TSO packets, rdma_count needs to be reset
+ * to 0 after a segment cut.
+ *
+ * The rdma_count field of the send request is
+ * the number of RDMAs of the packet starting at
+ * that request. For TSO send requests with one ore more cuts
+ * in the middle, this is the number of RDMAs starting
+ * after the last cut in the request. All previous
+ * segments before the last cut implicitly have 1 RDMA.
+ *
+ * Since the number of RDMAs is not known beforehand,
+ * it must be filled-in retroactively - after each
+ * segmentation cut or at the end of the entire packet.
+ */
+
+ while (1) {
+ /* Break the SKB or Fragment up into pieces which
+ * do not cross mgp->tx_boundary */
+ low = MYRI10GE_LOWPART_TO_U32(bus);
+ high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
+ while (len) {
+ u8 flags_next;
+ int cum_len_next;
+
+ if (unlikely(count == max_segments))
+ goto abort_linearize;
+
+ boundary =
+ (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
+ seglen = boundary - low;
+ if (seglen > len)
+ seglen = len;
+ flags_next = flags & ~MXGEFW_FLAGS_FIRST;
+ cum_len_next = cum_len + seglen;
+ if (mss) { /* TSO */
+ (req - rdma_count)->rdma_count = rdma_count + 1;
+
+ if (likely(cum_len >= 0)) { /* payload */
+ int next_is_first, chop;
+
+ chop = (cum_len_next > mss);
+ cum_len_next = cum_len_next % mss;
+ next_is_first = (cum_len_next == 0);
+ flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
+ flags_next |= next_is_first *
+ MXGEFW_FLAGS_FIRST;
+ rdma_count |= -(chop | next_is_first);
+ rdma_count += chop & ~next_is_first;
+ } else if (likely(cum_len_next >= 0)) { /* header ends */
+ int small;
+
+ rdma_count = -1;
+ cum_len_next = 0;
+ seglen = -cum_len;
+ small = (mss <= MXGEFW_SEND_SMALL_SIZE);
+ flags_next = MXGEFW_FLAGS_TSO_PLD |
+ MXGEFW_FLAGS_FIRST |
+ (small * MXGEFW_FLAGS_SMALL);
+ }
+ }
+ req->addr_high = high_swapped;
+ req->addr_low = htonl(low);
+ req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
+ req->pad = 0; /* complete solid 16-byte block; does this matter? */
+ req->rdma_count = 1;
+ req->length = htons(seglen);
+ req->cksum_offset = cksum_offset;
+ req->flags = flags | ((cum_len & 1) * odd_flag);
+
+ low += seglen;
+ len -= seglen;
+ cum_len = cum_len_next;
+ flags = flags_next;
+ req++;
+ count++;
+ rdma_count++;
+ if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
+ if (unlikely(cksum_offset > seglen))
+ cksum_offset -= seglen;
+ else
+ cksum_offset = 0;
+ }
+ }
+ if (frag_idx == frag_cnt)
+ break;
+
+ /* map next fragment for DMA */
+ frag = &skb_shinfo(skb)->frags[frag_idx];
+ frag_idx++;
+ len = skb_frag_size(frag);
+ bus = skb_frag_dma_map(&mgp->pdev->dev, frag, 0, len,
+ DMA_TO_DEVICE);
+ if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
+ myri10ge_unmap_tx_dma(mgp, tx, idx);
+ goto drop;
+ }
+ idx = (count + tx->req) & tx->mask;
+ dma_unmap_addr_set(&tx->info[idx], bus, bus);
+ dma_unmap_len_set(&tx->info[idx], len, len);
+ }
+
+ (req - rdma_count)->rdma_count = rdma_count;
+ if (mss)
+ do {
+ req--;
+ req->flags |= MXGEFW_FLAGS_TSO_LAST;
+ } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
+ MXGEFW_FLAGS_FIRST)));
+ idx = ((count - 1) + tx->req) & tx->mask;
+ tx->info[idx].last = 1;
+ myri10ge_submit_req(tx, tx->req_list, count);
+ /* if using multiple tx queues, make sure NIC polls the
+ * current slice */
+ if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
+ tx->queue_active = 1;
+ put_be32(htonl(1), tx->send_go);
+ mb();
+ mmiowb();
+ }
+ tx->pkt_start++;
+ if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
+ tx->stop_queue++;
+ netif_tx_stop_queue(netdev_queue);
+ }
+ return NETDEV_TX_OK;
+
+abort_linearize:
+ myri10ge_unmap_tx_dma(mgp, tx, idx);
+
+ if (skb_is_gso(skb)) {
+ netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
+ goto drop;
+ }
+
+ if (skb_linearize(skb))
+ goto drop;
+
+ tx->linearized++;
+ goto again;
+
+drop:
+ dev_kfree_skb_any(skb);
+ ss->stats.tx_dropped += 1;
+ return NETDEV_TX_OK;
+
+}
+
+static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct sk_buff *segs, *curr;
+ struct myri10ge_priv *mgp = netdev_priv(dev);
+ struct myri10ge_slice_state *ss;
+ netdev_tx_t status;
+
+ segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
+ if (IS_ERR(segs))
+ goto drop;
+
+ while (segs) {
+ curr = segs;
+ segs = segs->next;
+ curr->next = NULL;
+ status = myri10ge_xmit(curr, dev);
+ if (status != 0) {
+ dev_kfree_skb_any(curr);
+ if (segs != NULL) {
+ curr = segs;
+ segs = segs->next;
+ curr->next = NULL;
+ dev_kfree_skb_any(segs);
+ }
+ goto drop;
+ }
+ }
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+
+drop:
+ ss = &mgp->ss[skb_get_queue_mapping(skb)];
+ dev_kfree_skb_any(skb);
+ ss->stats.tx_dropped += 1;
+ return NETDEV_TX_OK;
+}
+
+static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ const struct myri10ge_priv *mgp = netdev_priv(dev);
+ const struct myri10ge_slice_netstats *slice_stats;
+ int i;
+
+ for (i = 0; i < mgp->num_slices; i++) {
+ slice_stats = &mgp->ss[i].stats;
+ stats->rx_packets += slice_stats->rx_packets;
+ stats->tx_packets += slice_stats->tx_packets;
+ stats->rx_bytes += slice_stats->rx_bytes;
+ stats->tx_bytes += slice_stats->tx_bytes;
+ stats->rx_dropped += slice_stats->rx_dropped;
+ stats->tx_dropped += slice_stats->tx_dropped;
+ }
+ return stats;
+}
+
+static void myri10ge_set_multicast_list(struct net_device *dev)
+{
+ struct myri10ge_priv *mgp = netdev_priv(dev);
+ struct myri10ge_cmd cmd;
+ struct netdev_hw_addr *ha;
+ __be32 data[2] = { 0, 0 };
+ int err;
+
+ /* can be called from atomic contexts,
+ * pass 1 to force atomicity in myri10ge_send_cmd() */
+ myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
+
+ /* This firmware is known to not support multicast */
+ if (!mgp->fw_multicast_support)
+ return;
+
+ /* Disable multicast filtering */
+
+ err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
+ if (err != 0) {
+ netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
+ err);
+ goto abort;
+ }
+
+ if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
+ /* request to disable multicast filtering, so quit here */
+ return;
+ }
+
+ /* Flush the filters */
+
+ err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
+ &cmd, 1);
+ if (err != 0) {
+ netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
+ err);
+ goto abort;
+ }
+
+ /* Walk the multicast list, and add each address */
+ netdev_for_each_mc_addr(ha, dev) {
+ memcpy(data, &ha->addr, ETH_ALEN);
+ cmd.data0 = ntohl(data[0]);
+ cmd.data1 = ntohl(data[1]);
+ err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
+ &cmd, 1);
+
+ if (err != 0) {
+ netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
+ err, ha->addr);
+ goto abort;
+ }
+ }
+ /* Enable multicast filtering */
+ err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
+ if (err != 0) {
+ netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
+ err);
+ goto abort;
+ }
+
+ return;
+
+abort:
+ return;
+}
+
+static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *sa = addr;
+ struct myri10ge_priv *mgp = netdev_priv(dev);
+ int status;
+
+ if (!is_valid_ether_addr(sa->sa_data))
+ return -EADDRNOTAVAIL;
+
+ status = myri10ge_update_mac_address(mgp, sa->sa_data);
+ if (status != 0) {
+ netdev_err(dev, "changing mac address failed with %d\n",
+ status);
+ return status;
+ }
+
+ /* change the dev structure */
+ memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
+ return 0;
+}
+
+static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct myri10ge_priv *mgp = netdev_priv(dev);
+ int error = 0;
+
+ if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
+ netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
+ return -EINVAL;
+ }
+ netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
+ if (mgp->running) {
+ /* if we change the mtu on an active device, we must
+ * reset the device so the firmware sees the change */
+ myri10ge_close(dev);
+ dev->mtu = new_mtu;
+ myri10ge_open(dev);
+ } else
+ dev->mtu = new_mtu;
+
+ return error;
+}
+
+/*
+ * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
+ * Only do it if the bridge is a root port since we don't want to disturb
+ * any other device, except if forced with myri10ge_ecrc_enable > 1.
+ */
+
+static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *bridge = mgp->pdev->bus->self;
+ struct device *dev = &mgp->pdev->dev;
+ int cap;
+ unsigned err_cap;
+ int ret;
+
+ if (!myri10ge_ecrc_enable || !bridge)
+ return;
+
+ /* check that the bridge is a root port */
+ if (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) {
+ if (myri10ge_ecrc_enable > 1) {
+ struct pci_dev *prev_bridge, *old_bridge = bridge;
+
+ /* Walk the hierarchy up to the root port
+ * where ECRC has to be enabled */
+ do {
+ prev_bridge = bridge;
+ bridge = bridge->bus->self;
+ if (!bridge || prev_bridge == bridge) {
+ dev_err(dev,
+ "Failed to find root port"
+ " to force ECRC\n");
+ return;
+ }
+ } while (pci_pcie_type(bridge) !=
+ PCI_EXP_TYPE_ROOT_PORT);
+
+ dev_info(dev,
+ "Forcing ECRC on non-root port %s"
+ " (enabling on root port %s)\n",
+ pci_name(old_bridge), pci_name(bridge));
+ } else {
+ dev_err(dev,
+ "Not enabling ECRC on non-root port %s\n",
+ pci_name(bridge));
+ return;
+ }
+ }
+
+ cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
+ if (!cap)
+ return;
+
+ ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
+ if (ret) {
+ dev_err(dev, "failed reading ext-conf-space of %s\n",
+ pci_name(bridge));
+ dev_err(dev, "\t pci=nommconf in use? "
+ "or buggy/incomplete/absent ACPI MCFG attr?\n");
+ return;
+ }
+ if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
+ return;
+
+ err_cap |= PCI_ERR_CAP_ECRC_GENE;
+ pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
+ dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
+}
+
+/*
+ * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
+ * when the PCI-E Completion packets are aligned on an 8-byte
+ * boundary. Some PCI-E chip sets always align Completion packets; on
+ * the ones that do not, the alignment can be enforced by enabling
+ * ECRC generation (if supported).
+ *
+ * When PCI-E Completion packets are not aligned, it is actually more
+ * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
+ *
+ * /*(DEBLOBBED)*/
+
+static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+ struct device *dev = &pdev->dev;
+ int status;
+
+ mgp->tx_boundary = 4096;
+ /*
+ * Verify the max read request size was set to 4KB
+ * before trying the test with 4KB.
+ */
+ status = pcie_get_readrq(pdev);
+ if (status < 0) {
+ dev_err(dev, "Couldn't read max read req size: %d\n", status);
+ goto abort;
+ }
+ if (status != 4096) {
+ dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
+ mgp->tx_boundary = 2048;
+ }
+ /*
+ * load the optimized firmware (which assumes aligned PCIe
+ * completions) in order to see if it works on this host.
+ */
+ set_fw_name(mgp, myri10ge_fw_aligned, false);
+ status = myri10ge_load_firmware(mgp, 1);
+ if (status != 0) {
+ goto abort;
+ }
+
+ /*
+ * Enable ECRC if possible
+ */
+ myri10ge_enable_ecrc(mgp);
+
+ /*
+ * Run a DMA test which watches for unaligned completions and
+ * aborts on the first one seen.
+ */
+
+ status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
+ if (status == 0)
+ return; /* keep the aligned firmware */
+
+ if (status != -E2BIG)
+ dev_warn(dev, "DMA test failed: %d\n", status);
+ if (status == -ENOSYS)
+ dev_warn(dev, "Falling back to ethp! "
+ "Please install up to date fw\n");
+abort:
+ /* fall back to using the unaligned firmware */
+ mgp->tx_boundary = 2048;
+ set_fw_name(mgp, myri10ge_fw_unaligned, false);
+}
+
+static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
+{
+ int overridden = 0;
+
+ if (myri10ge_force_firmware == 0) {
+ int link_width;
+ u16 lnk;
+
+ pcie_capability_read_word(mgp->pdev, PCI_EXP_LNKSTA, &lnk);
+ link_width = (lnk >> 4) & 0x3f;
+
+ /* Check to see if Link is less than 8 or if the
+ * upstream bridge is known to provide aligned
+ * completions */
+ if (link_width < 8) {
+ dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
+ link_width);
+ mgp->tx_boundary = 4096;
+ set_fw_name(mgp, myri10ge_fw_aligned, false);
+ } else {
+ myri10ge_firmware_probe(mgp);
+ }
+ } else {
+ if (myri10ge_force_firmware == 1) {
+ dev_info(&mgp->pdev->dev,
+ "Assuming aligned completions (forced)\n");
+ mgp->tx_boundary = 4096;
+ set_fw_name(mgp, myri10ge_fw_aligned, false);
+ } else {
+ dev_info(&mgp->pdev->dev,
+ "Assuming unaligned completions (forced)\n");
+ mgp->tx_boundary = 2048;
+ set_fw_name(mgp, myri10ge_fw_unaligned, false);
+ }
+ }
+
+ kparam_block_sysfs_write(myri10ge_fw_name);
+ if (myri10ge_fw_name != NULL) {
+ char *fw_name = kstrdup(myri10ge_fw_name, GFP_KERNEL);
+ if (fw_name) {
+ overridden = 1;
+ set_fw_name(mgp, fw_name, true);
+ }
+ }
+ kparam_unblock_sysfs_write(myri10ge_fw_name);
+
+ if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
+ myri10ge_fw_names[mgp->board_number] != NULL &&
+ strlen(myri10ge_fw_names[mgp->board_number])) {
+ set_fw_name(mgp, myri10ge_fw_names[mgp->board_number], false);
+ overridden = 1;
+ }
+ if (overridden)
+ dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
+ mgp->fw_name);
+}
+
+static void myri10ge_mask_surprise_down(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge = pdev->bus->self;
+ int cap;
+ u32 mask;
+
+ if (bridge == NULL)
+ return;
+
+ cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
+ if (cap) {
+ /* a sram parity error can cause a surprise link
+ * down; since we expect and can recover from sram
+ * parity errors, mask surprise link down events */
+ pci_read_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, &mask);
+ mask |= 0x20;
+ pci_write_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, mask);
+ }
+}
+
+#ifdef CONFIG_PM
+static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct myri10ge_priv *mgp;
+ struct net_device *netdev;
+
+ mgp = pci_get_drvdata(pdev);
+ if (mgp == NULL)
+ return -EINVAL;
+ netdev = mgp->dev;
+
+ netif_device_detach(netdev);
+ if (netif_running(netdev)) {
+ netdev_info(netdev, "closing\n");
+ rtnl_lock();
+ myri10ge_close(netdev);
+ rtnl_unlock();
+ }
+ myri10ge_dummy_rdma(mgp, 0);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+
+ return pci_set_power_state(pdev, pci_choose_state(pdev, state));
+}
+
+static int myri10ge_resume(struct pci_dev *pdev)
+{
+ struct myri10ge_priv *mgp;
+ struct net_device *netdev;
+ int status;
+ u16 vendor;
+
+ mgp = pci_get_drvdata(pdev);
+ if (mgp == NULL)
+ return -EINVAL;
+ netdev = mgp->dev;
+ pci_set_power_state(pdev, PCI_D0); /* zeros conf space as a side effect */
+ msleep(5); /* give card time to respond */
+ pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
+ if (vendor == 0xffff) {
+ netdev_err(mgp->dev, "device disappeared!\n");
+ return -EIO;
+ }
+
+ pci_restore_state(pdev);
+
+ status = pci_enable_device(pdev);
+ if (status) {
+ dev_err(&pdev->dev, "failed to enable device\n");
+ return status;
+ }
+
+ pci_set_master(pdev);
+
+ myri10ge_reset(mgp);
+ myri10ge_dummy_rdma(mgp, 1);
+
+ /* Save configuration space to be restored if the
+ * nic resets due to a parity error */
+ pci_save_state(pdev);
+
+ if (netif_running(netdev)) {
+ rtnl_lock();
+ status = myri10ge_open(netdev);
+ rtnl_unlock();
+ if (status != 0)
+ goto abort_with_enabled;
+
+ }
+ netif_device_attach(netdev);
+
+ return 0;
+
+abort_with_enabled:
+ pci_disable_device(pdev);
+ return -EIO;
+
+}
+#endif /* CONFIG_PM */
+
+static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+ int vs = mgp->vendor_specific_offset;
+ u32 reboot;
+
+ /*enter read32 mode */
+ pci_write_config_byte(pdev, vs + 0x10, 0x3);
+
+ /*read REBOOT_STATUS (0xfffffff0) */
+ pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
+ pci_read_config_dword(pdev, vs + 0x14, &reboot);
+ return reboot;
+}
+
+static void
+myri10ge_check_slice(struct myri10ge_slice_state *ss, int *reset_needed,
+ int *busy_slice_cnt, u32 rx_pause_cnt)
+{
+ struct myri10ge_priv *mgp = ss->mgp;
+ int slice = ss - mgp->ss;
+
+ if (ss->tx.req != ss->tx.done &&
+ ss->tx.done == ss->watchdog_tx_done &&
+ ss->watchdog_tx_req != ss->watchdog_tx_done) {
+ /* nic seems like it might be stuck.. */
+ if (rx_pause_cnt != mgp->watchdog_pause) {
+ if (net_ratelimit())
+ netdev_warn(mgp->dev, "slice %d: TX paused, "
+ "check link partner\n", slice);
+ } else {
+ netdev_warn(mgp->dev,
+ "slice %d: TX stuck %d %d %d %d %d %d\n",
+ slice, ss->tx.queue_active, ss->tx.req,
+ ss->tx.done, ss->tx.pkt_start,
+ ss->tx.pkt_done,
+ (int)ntohl(mgp->ss[slice].fw_stats->
+ send_done_count));
+ *reset_needed = 1;
+ ss->stuck = 1;
+ }
+ }
+ if (ss->watchdog_tx_done != ss->tx.done ||
+ ss->watchdog_rx_done != ss->rx_done.cnt) {
+ *busy_slice_cnt += 1;
+ }
+ ss->watchdog_tx_done = ss->tx.done;
+ ss->watchdog_tx_req = ss->tx.req;
+ ss->watchdog_rx_done = ss->rx_done.cnt;
+}
+
+/*
+ * This watchdog is used to check whether the board has suffered
+ * from a parity error and needs to be recovered.
+ */
+static void myri10ge_watchdog(struct work_struct *work)
+{
+ struct myri10ge_priv *mgp =
+ container_of(work, struct myri10ge_priv, watchdog_work);
+ struct myri10ge_slice_state *ss;
+ u32 reboot, rx_pause_cnt;
+ int status, rebooted;
+ int i;
+ int reset_needed = 0;
+ int busy_slice_cnt = 0;
+ u16 cmd, vendor;
+
+ mgp->watchdog_resets++;
+ pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
+ rebooted = 0;
+ if ((cmd & PCI_COMMAND_MASTER) == 0) {
+ /* Bus master DMA disabled? Check to see
+ * if the card rebooted due to a parity error
+ * For now, just report it */
+ reboot = myri10ge_read_reboot(mgp);
+ netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
+ reboot, myri10ge_reset_recover ? "" : " not");
+ if (myri10ge_reset_recover == 0)
+ return;
+ rtnl_lock();
+ mgp->rebooted = 1;
+ rebooted = 1;
+ myri10ge_close(mgp->dev);
+ myri10ge_reset_recover--;
+ mgp->rebooted = 0;
+ /*
+ * A rebooted nic will come back with config space as
+ * it was after power was applied to PCIe bus.
+ * Attempt to restore config space which was saved
+ * when the driver was loaded, or the last time the
+ * nic was resumed from power saving mode.
+ */
+ pci_restore_state(mgp->pdev);
+
+ /* save state again for accounting reasons */
+ pci_save_state(mgp->pdev);
+
+ } else {
+ /* if we get back -1's from our slot, perhaps somebody
+ * powered off our card. Don't try to reset it in
+ * this case */
+ if (cmd == 0xffff) {
+ pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
+ if (vendor == 0xffff) {
+ netdev_err(mgp->dev, "device disappeared!\n");
+ return;
+ }
+ }
+ /* Perhaps it is a software error. See if stuck slice
+ * has recovered, reset if not */
+ rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = mgp->ss;
+ if (ss->stuck) {
+ myri10ge_check_slice(ss, &reset_needed,
+ &busy_slice_cnt,
+ rx_pause_cnt);
+ ss->stuck = 0;
+ }
+ }
+ if (!reset_needed) {
+ netdev_dbg(mgp->dev, "not resetting\n");
+ return;
+ }
+
+ netdev_err(mgp->dev, "device timeout, resetting\n");
+ }
+
+ if (!rebooted) {
+ rtnl_lock();
+ myri10ge_close(mgp->dev);
+ }
+ status = myri10ge_load_firmware(mgp, 1);
+ if (status != 0)
+ netdev_err(mgp->dev, "failed to load firmware\n");
+ else
+ myri10ge_open(mgp->dev);
+ rtnl_unlock();
+}
+
+/*
+ * We use our own timer routine rather than relying upon
+ * netdev->tx_timeout because we have a very large hardware transmit
+ * queue. Due to the large queue, the netdev->tx_timeout function
+ * cannot detect a NIC with a parity error in a timely fashion if the
+ * NIC is lightly loaded.
+ */
+static void myri10ge_watchdog_timer(unsigned long arg)
+{
+ struct myri10ge_priv *mgp;
+ struct myri10ge_slice_state *ss;
+ int i, reset_needed, busy_slice_cnt;
+ u32 rx_pause_cnt;
+ u16 cmd;
+
+ mgp = (struct myri10ge_priv *)arg;
+
+ rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
+ busy_slice_cnt = 0;
+ for (i = 0, reset_needed = 0;
+ i < mgp->num_slices && reset_needed == 0; ++i) {
+
+ ss = &mgp->ss[i];
+ if (ss->rx_small.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
+ mgp->small_bytes + MXGEFW_PAD,
+ 1);
+ if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
+ myri10ge_fill_thresh)
+ ss->rx_small.watchdog_needed = 0;
+ }
+ if (ss->rx_big.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
+ mgp->big_bytes, 1);
+ if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
+ myri10ge_fill_thresh)
+ ss->rx_big.watchdog_needed = 0;
+ }
+ myri10ge_check_slice(ss, &reset_needed, &busy_slice_cnt,
+ rx_pause_cnt);
+ }
+ /* if we've sent or received no traffic, poll the NIC to
+ * ensure it is still there. Otherwise, we risk not noticing
+ * an error in a timely fashion */
+ if (busy_slice_cnt == 0) {
+ pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
+ if ((cmd & PCI_COMMAND_MASTER) == 0) {
+ reset_needed = 1;
+ }
+ }
+ mgp->watchdog_pause = rx_pause_cnt;
+
+ if (reset_needed) {
+ schedule_work(&mgp->watchdog_work);
+ } else {
+ /* rearm timer */
+ mod_timer(&mgp->watchdog_timer,
+ jiffies + myri10ge_watchdog_timeout * HZ);
+ }
+}
+
+static void myri10ge_free_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_slice_state *ss;
+ struct pci_dev *pdev = mgp->pdev;
+ size_t bytes;
+ int i;
+
+ if (mgp->ss == NULL)
+ return;
+
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ if (ss->rx_done.entry != NULL) {
+ bytes = mgp->max_intr_slots *
+ sizeof(*ss->rx_done.entry);
+ dma_free_coherent(&pdev->dev, bytes,
+ ss->rx_done.entry, ss->rx_done.bus);
+ ss->rx_done.entry = NULL;
+ }
+ if (ss->fw_stats != NULL) {
+ bytes = sizeof(*ss->fw_stats);
+ dma_free_coherent(&pdev->dev, bytes,
+ ss->fw_stats, ss->fw_stats_bus);
+ ss->fw_stats = NULL;
+ }
+ napi_hash_del(&ss->napi);
+ netif_napi_del(&ss->napi);
+ }
+ /* Wait till napi structs are no longer used, and then free ss. */
+ synchronize_rcu();
+ kfree(mgp->ss);
+ mgp->ss = NULL;
+}
+
+static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_slice_state *ss;
+ struct pci_dev *pdev = mgp->pdev;
+ size_t bytes;
+ int i;
+
+ bytes = sizeof(*mgp->ss) * mgp->num_slices;
+ mgp->ss = kzalloc(bytes, GFP_KERNEL);
+ if (mgp->ss == NULL) {
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
+ ss->rx_done.entry = dma_zalloc_coherent(&pdev->dev, bytes,
+ &ss->rx_done.bus,
+ GFP_KERNEL);
+ if (ss->rx_done.entry == NULL)
+ goto abort;
+ bytes = sizeof(*ss->fw_stats);
+ ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
+ &ss->fw_stats_bus,
+ GFP_KERNEL);
+ if (ss->fw_stats == NULL)
+ goto abort;
+ ss->mgp = mgp;
+ ss->dev = mgp->dev;
+ netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
+ myri10ge_napi_weight);
+ napi_hash_add(&ss->napi);
+ }
+ return 0;
+abort:
+ myri10ge_free_slices(mgp);
+ return -ENOMEM;
+}
+
+/*
+ * This function determines the number of slices supported.
+ * The number slices is the minimum of the number of CPUS,
+ * the number of MSI-X irqs supported, the number of slices
+ * supported by the firmware
+ */
+static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_cmd cmd;
+ struct pci_dev *pdev = mgp->pdev;
+ char *old_fw;
+ bool old_allocated;
+ int i, status, ncpus;
+
+ mgp->num_slices = 1;
+ ncpus = netif_get_num_default_rss_queues();
+
+ if (myri10ge_max_slices == 1 || !pdev->msix_cap ||
+ (myri10ge_max_slices == -1 && ncpus < 2))
+ return;
+
+ /* try to load the slice aware rss firmware */
+ old_fw = mgp->fw_name;
+ old_allocated = mgp->fw_name_allocated;
+ /* don't free old_fw if we override it. */
+ mgp->fw_name_allocated = false;
+
+ if (myri10ge_fw_name != NULL) {
+ dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
+ myri10ge_fw_name);
+ set_fw_name(mgp, myri10ge_fw_name, false);
+ } else if (old_fw == myri10ge_fw_aligned)
+ set_fw_name(mgp, myri10ge_fw_rss_aligned, false);
+ else
+ set_fw_name(mgp, myri10ge_fw_rss_unaligned, false);
+ status = myri10ge_load_firmware(mgp, 0);
+ if (status != 0) {
+ dev_info(&pdev->dev, "Rss firmware not found\n");
+ if (old_allocated)
+ kfree(old_fw);
+ return;
+ }
+
+ /* hit the board with a reset to ensure it is alive */
+ memset(&cmd, 0, sizeof(cmd));
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed reset\n");
+ goto abort_with_fw;
+ }
+
+ mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
+
+ /* tell it the size of the interrupt queues */
+ cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
+ goto abort_with_fw;
+ }
+
+ /* ask the maximum number of slices it supports */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
+ if (status != 0)
+ goto abort_with_fw;
+ else
+ mgp->num_slices = cmd.data0;
+
+ /* Only allow multiple slices if MSI-X is usable */
+ if (!myri10ge_msi) {
+ goto abort_with_fw;
+ }
+
+ /* if the admin did not specify a limit to how many
+ * slices we should use, cap it automatically to the
+ * number of CPUs currently online */
+ if (myri10ge_max_slices == -1)
+ myri10ge_max_slices = ncpus;
+
+ if (mgp->num_slices > myri10ge_max_slices)
+ mgp->num_slices = myri10ge_max_slices;
+
+ /* Now try to allocate as many MSI-X vectors as we have
+ * slices. We give up on MSI-X if we can only get a single
+ * vector. */
+
+ mgp->msix_vectors = kcalloc(mgp->num_slices, sizeof(*mgp->msix_vectors),
+ GFP_KERNEL);
+ if (mgp->msix_vectors == NULL)
+ goto no_msix;
+ for (i = 0; i < mgp->num_slices; i++) {
+ mgp->msix_vectors[i].entry = i;
+ }
+
+ while (mgp->num_slices > 1) {
+ mgp->num_slices = rounddown_pow_of_two(mgp->num_slices);
+ if (mgp->num_slices == 1)
+ goto no_msix;
+ status = pci_enable_msix_range(pdev,
+ mgp->msix_vectors,
+ mgp->num_slices,
+ mgp->num_slices);
+ if (status < 0)
+ goto no_msix;
+
+ pci_disable_msix(pdev);
+
+ if (status == mgp->num_slices) {
+ if (old_allocated)
+ kfree(old_fw);
+ return;
+ } else {
+ mgp->num_slices = status;
+ }
+ }
+
+no_msix:
+ if (mgp->msix_vectors != NULL) {
+ kfree(mgp->msix_vectors);
+ mgp->msix_vectors = NULL;
+ }
+
+abort_with_fw:
+ mgp->num_slices = 1;
+ set_fw_name(mgp, old_fw, old_allocated);
+ myri10ge_load_firmware(mgp, 0);
+}
+
+static const struct net_device_ops myri10ge_netdev_ops = {
+ .ndo_open = myri10ge_open,
+ .ndo_stop = myri10ge_close,
+ .ndo_start_xmit = myri10ge_xmit,
+ .ndo_get_stats64 = myri10ge_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = myri10ge_change_mtu,
+ .ndo_set_rx_mode = myri10ge_set_multicast_list,
+ .ndo_set_mac_address = myri10ge_set_mac_address,
+#ifdef CONFIG_NET_RX_BUSY_POLL
+ .ndo_busy_poll = myri10ge_busy_poll,
+#endif
+};
+
+static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct myri10ge_priv *mgp;
+ struct device *dev = &pdev->dev;
+ int i;
+ int status = -ENXIO;
+ int dac_enabled;
+ unsigned hdr_offset, ss_offset;
+ static int board_number;
+
+ netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
+ if (netdev == NULL)
+ return -ENOMEM;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ mgp = netdev_priv(netdev);
+ mgp->dev = netdev;
+ mgp->pdev = pdev;
+ mgp->pause = myri10ge_flow_control;
+ mgp->intr_coal_delay = myri10ge_intr_coal_delay;
+ mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
+ mgp->board_number = board_number;
+ init_waitqueue_head(&mgp->down_wq);
+
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev, "pci_enable_device call failed\n");
+ status = -ENODEV;
+ goto abort_with_netdev;
+ }
+
+ /* Find the vendor-specific cap so we can check
+ * the reboot register later on */
+ mgp->vendor_specific_offset
+ = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
+
+ /* Set our max read request to 4KB */
+ status = pcie_set_readrq(pdev, 4096);
+ if (status != 0) {
+ dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
+ status);
+ goto abort_with_enabled;
+ }
+
+ myri10ge_mask_surprise_down(pdev);
+ pci_set_master(pdev);
+ dac_enabled = 1;
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (status != 0) {
+ dac_enabled = 0;
+ dev_err(&pdev->dev,
+ "64-bit pci address mask was refused, "
+ "trying 32-bit\n");
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ }
+ if (status != 0) {
+ dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
+ goto abort_with_enabled;
+ }
+ (void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
+ &mgp->cmd_bus, GFP_KERNEL);
+ if (!mgp->cmd) {
+ status = -ENOMEM;
+ goto abort_with_enabled;
+ }
+
+ mgp->board_span = pci_resource_len(pdev, 0);
+ mgp->iomem_base = pci_resource_start(pdev, 0);
+ mgp->wc_cookie = arch_phys_wc_add(mgp->iomem_base, mgp->board_span);
+ mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
+ if (mgp->sram == NULL) {
+ dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
+ mgp->board_span, mgp->iomem_base);
+ status = -ENXIO;
+ goto abort_with_mtrr;
+ }
+ hdr_offset =
+ swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
+ ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
+ mgp->sram_size = swab32(readl(mgp->sram + ss_offset));
+ if (mgp->sram_size > mgp->board_span ||
+ mgp->sram_size <= MYRI10GE_FW_OFFSET) {
+ dev_err(&pdev->dev,
+ "invalid sram_size %dB or board span %ldB\n",
+ mgp->sram_size, mgp->board_span);
+ goto abort_with_ioremap;
+ }
+ memcpy_fromio(mgp->eeprom_strings,
+ mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
+ memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
+ status = myri10ge_read_mac_addr(mgp);
+ if (status)
+ goto abort_with_ioremap;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ netdev->dev_addr[i] = mgp->mac_addr[i];
+
+ myri10ge_select_firmware(mgp);
+
+ status = myri10ge_load_firmware(mgp, 1);
+ if (status != 0) {
+ dev_err(&pdev->dev, "failed to load firmware\n");
+ goto abort_with_ioremap;
+ }
+ myri10ge_probe_slices(mgp);
+ status = myri10ge_alloc_slices(mgp);
+ if (status != 0) {
+ dev_err(&pdev->dev, "failed to alloc slice state\n");
+ goto abort_with_firmware;
+ }
+ netif_set_real_num_tx_queues(netdev, mgp->num_slices);
+ netif_set_real_num_rx_queues(netdev, mgp->num_slices);
+ status = myri10ge_reset(mgp);
+ if (status != 0) {
+ dev_err(&pdev->dev, "failed reset\n");
+ goto abort_with_slices;
+ }
+#ifdef CONFIG_MYRI10GE_DCA
+ myri10ge_setup_dca(mgp);
+#endif
+ pci_set_drvdata(pdev, mgp);
+ if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
+ myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
+ if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
+ myri10ge_initial_mtu = 68;
+
+ netdev->netdev_ops = &myri10ge_netdev_ops;
+ netdev->mtu = myri10ge_initial_mtu;
+ netdev->hw_features = mgp->features | NETIF_F_RXCSUM;
+
+ /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */
+ netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
+
+ netdev->features = netdev->hw_features;
+
+ if (dac_enabled)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->vlan_features |= mgp->features;
+ if (mgp->fw_ver_tiny < 37)
+ netdev->vlan_features &= ~NETIF_F_TSO6;
+ if (mgp->fw_ver_tiny < 32)
+ netdev->vlan_features &= ~NETIF_F_TSO;
+
+ /* make sure we can get an irq, and that MSI can be
+ * setup (if available). */
+ status = myri10ge_request_irq(mgp);
+ if (status != 0)
+ goto abort_with_firmware;
+ myri10ge_free_irq(mgp);
+
+ /* Save configuration space to be restored if the
+ * nic resets due to a parity error */
+ pci_save_state(pdev);
+
+ /* Setup the watchdog timer */
+ setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
+ (unsigned long)mgp);
+
+ netdev->ethtool_ops = &myri10ge_ethtool_ops;
+ INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
+ status = register_netdev(netdev);
+ if (status != 0) {
+ dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
+ goto abort_with_state;
+ }
+ if (mgp->msix_enabled)
+ dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
+ mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
+ (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
+ else
+ dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
+ mgp->msi_enabled ? "MSI" : "xPIC",
+ pdev->irq, mgp->tx_boundary, mgp->fw_name,
+ (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
+
+ board_number++;
+ return 0;
+
+abort_with_state:
+ pci_restore_state(pdev);
+
+abort_with_slices:
+ myri10ge_free_slices(mgp);
+
+abort_with_firmware:
+ myri10ge_dummy_rdma(mgp, 0);
+
+abort_with_ioremap:
+ if (mgp->mac_addr_string != NULL)
+ dev_err(&pdev->dev,
+ "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
+ mgp->mac_addr_string, mgp->serial_number);
+ iounmap(mgp->sram);
+
+abort_with_mtrr:
+ arch_phys_wc_del(mgp->wc_cookie);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
+ mgp->cmd, mgp->cmd_bus);
+
+abort_with_enabled:
+ pci_disable_device(pdev);
+
+abort_with_netdev:
+ set_fw_name(mgp, NULL, false);
+ free_netdev(netdev);
+ return status;
+}
+
+/*
+ * myri10ge_remove
+ *
+ * Does what is necessary to shutdown one Myrinet device. Called
+ * once for each Myrinet card by the kernel when a module is
+ * unloaded.
+ */
+static void myri10ge_remove(struct pci_dev *pdev)
+{
+ struct myri10ge_priv *mgp;
+ struct net_device *netdev;
+
+ mgp = pci_get_drvdata(pdev);
+ if (mgp == NULL)
+ return;
+
+ cancel_work_sync(&mgp->watchdog_work);
+ netdev = mgp->dev;
+ unregister_netdev(netdev);
+
+#ifdef CONFIG_MYRI10GE_DCA
+ myri10ge_teardown_dca(mgp);
+#endif
+ myri10ge_dummy_rdma(mgp, 0);
+
+ /* avoid a memory leak */
+ pci_restore_state(pdev);
+
+ iounmap(mgp->sram);
+ arch_phys_wc_del(mgp->wc_cookie);
+ myri10ge_free_slices(mgp);
+ kfree(mgp->msix_vectors);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
+ mgp->cmd, mgp->cmd_bus);
+
+ set_fw_name(mgp, NULL, false);
+ free_netdev(netdev);
+ pci_disable_device(pdev);
+}
+
+#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
+#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
+
+static const struct pci_device_id myri10ge_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
+ {PCI_DEVICE
+ (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
+ {0},
+};
+
+MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
+
+static struct pci_driver myri10ge_driver = {
+ .name = "myri10ge",
+ .probe = myri10ge_probe,
+ .remove = myri10ge_remove,
+ .id_table = myri10ge_pci_tbl,
+#ifdef CONFIG_PM
+ .suspend = myri10ge_suspend,
+ .resume = myri10ge_resume,
+#endif
+};
+
+#ifdef CONFIG_MYRI10GE_DCA
+static int
+myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
+{
+ int err = driver_for_each_device(&myri10ge_driver.driver,
+ NULL, &event,
+ myri10ge_notify_dca_device);
+
+ if (err)
+ return NOTIFY_BAD;
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block myri10ge_dca_notifier = {
+ .notifier_call = myri10ge_notify_dca,
+ .next = NULL,
+ .priority = 0,
+};
+#endif /* CONFIG_MYRI10GE_DCA */
+
+static __init int myri10ge_init_module(void)
+{
+ pr_info("Version %s\n", MYRI10GE_VERSION_STR);
+
+ if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
+ pr_err("Illegal rssh hash type %d, defaulting to source port\n",
+ myri10ge_rss_hash);
+ myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
+ }
+#ifdef CONFIG_MYRI10GE_DCA
+ dca_register_notify(&myri10ge_dca_notifier);
+#endif
+ if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
+ myri10ge_max_slices = MYRI10GE_MAX_SLICES;
+
+ return pci_register_driver(&myri10ge_driver);
+}
+
+module_init(myri10ge_init_module);
+
+static __exit void myri10ge_cleanup_module(void)
+{
+#ifdef CONFIG_MYRI10GE_DCA
+ dca_unregister_notify(&myri10ge_dca_notifier);
+#endif
+ pci_unregister_driver(&myri10ge_driver);
+}
+
+module_exit(myri10ge_cleanup_module);
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h
new file mode 100644
index 000000000..b7fc26c4f
--- /dev/null
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h
@@ -0,0 +1,435 @@
+#ifndef __MYRI10GE_MCP_H__
+#define __MYRI10GE_MCP_H__
+
+#define MXGEFW_VERSION_MAJOR 1
+#define MXGEFW_VERSION_MINOR 4
+
+/* 8 Bytes */
+struct mcp_dma_addr {
+ __be32 high;
+ __be32 low;
+};
+
+/* 4 Bytes */
+struct mcp_slot {
+ __sum16 checksum;
+ __be16 length;
+};
+
+/* 64 Bytes */
+struct mcp_cmd {
+ __be32 cmd;
+ __be32 data0; /* will be low portion if data > 32 bits */
+ /* 8 */
+ __be32 data1; /* will be high portion if data > 32 bits */
+ __be32 data2; /* currently unused.. */
+ /* 16 */
+ struct mcp_dma_addr response_addr;
+ /* 24 */
+ u8 pad[40];
+};
+
+/* 8 Bytes */
+struct mcp_cmd_response {
+ __be32 data;
+ __be32 result;
+};
+
+/*
+ * flags used in mcp_kreq_ether_send_t:
+ *
+ * The SMALL flag is only needed in the first segment. It is raised
+ * for packets that are total less or equal 512 bytes.
+ *
+ * The CKSUM flag must be set in all segments.
+ *
+ * The PADDED flags is set if the packet needs to be padded, and it
+ * must be set for all segments.
+ *
+ * The MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative
+ * length of all previous segments was odd.
+ */
+
+#define MXGEFW_FLAGS_SMALL 0x1
+#define MXGEFW_FLAGS_TSO_HDR 0x1
+#define MXGEFW_FLAGS_FIRST 0x2
+#define MXGEFW_FLAGS_ALIGN_ODD 0x4
+#define MXGEFW_FLAGS_CKSUM 0x8
+#define MXGEFW_FLAGS_TSO_LAST 0x8
+#define MXGEFW_FLAGS_NO_TSO 0x10
+#define MXGEFW_FLAGS_TSO_CHOP 0x10
+#define MXGEFW_FLAGS_TSO_PLD 0x20
+
+#define MXGEFW_SEND_SMALL_SIZE 1520
+#define MXGEFW_MAX_MTU 9400
+
+union mcp_pso_or_cumlen {
+ u16 pseudo_hdr_offset;
+ u16 cum_len;
+};
+
+#define MXGEFW_MAX_SEND_DESC 12
+#define MXGEFW_PAD 2
+
+/* 16 Bytes */
+struct mcp_kreq_ether_send {
+ __be32 addr_high;
+ __be32 addr_low;
+ __be16 pseudo_hdr_offset;
+ __be16 length;
+ u8 pad;
+ u8 rdma_count;
+ u8 cksum_offset; /* where to start computing cksum */
+ u8 flags; /* as defined above */
+};
+
+/* 8 Bytes */
+struct mcp_kreq_ether_recv {
+ __be32 addr_high;
+ __be32 addr_low;
+};
+
+/* Commands */
+
+#define MXGEFW_BOOT_HANDOFF 0xfc0000
+#define MXGEFW_BOOT_DUMMY_RDMA 0xfc01c0
+
+#define MXGEFW_ETH_CMD 0xf80000
+#define MXGEFW_ETH_SEND_4 0x200000
+#define MXGEFW_ETH_SEND_1 0x240000
+#define MXGEFW_ETH_SEND_2 0x280000
+#define MXGEFW_ETH_SEND_3 0x2c0000
+#define MXGEFW_ETH_RECV_SMALL 0x300000
+#define MXGEFW_ETH_RECV_BIG 0x340000
+#define MXGEFW_ETH_SEND_GO 0x380000
+#define MXGEFW_ETH_SEND_STOP 0x3C0000
+
+#define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000))
+#define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
+
+enum myri10ge_mcp_cmd_type {
+ MXGEFW_CMD_NONE = 0,
+ /* Reset the mcp, it is left in a safe state, waiting
+ * for the driver to set all its parameters */
+ MXGEFW_CMD_RESET = 1,
+
+ /* get the version number of the current firmware..
+ * (may be available in the eeprom strings..? */
+ MXGEFW_GET_MCP_VERSION = 2,
+
+ /* Parameters which must be set by the driver before it can
+ * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next
+ * MXGEFW_CMD_RESET is issued */
+
+ MXGEFW_CMD_SET_INTRQ_DMA = 3,
+ /* data0 = LSW of the host address
+ * data1 = MSW of the host address
+ * data2 = slice number if multiple slices are used
+ */
+
+ MXGEFW_CMD_SET_BIG_BUFFER_SIZE = 4, /* in bytes, power of 2 */
+ MXGEFW_CMD_SET_SMALL_BUFFER_SIZE = 5, /* in bytes */
+
+ /* Parameters which refer to lanai SRAM addresses where the
+ * driver must issue PIO writes for various things */
+
+ MXGEFW_CMD_GET_SEND_OFFSET = 6,
+ MXGEFW_CMD_GET_SMALL_RX_OFFSET = 7,
+ MXGEFW_CMD_GET_BIG_RX_OFFSET = 8,
+ /* data0 = slice number if multiple slices are used */
+
+ MXGEFW_CMD_GET_IRQ_ACK_OFFSET = 9,
+ MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET = 10,
+
+ /* Parameters which refer to rings stored on the MCP,
+ * and whose size is controlled by the mcp */
+
+ MXGEFW_CMD_GET_SEND_RING_SIZE = 11, /* in bytes */
+ MXGEFW_CMD_GET_RX_RING_SIZE = 12, /* in bytes */
+
+ /* Parameters which refer to rings stored in the host,
+ * and whose size is controlled by the host. Note that
+ * all must be physically contiguous and must contain
+ * a power of 2 number of entries. */
+
+ MXGEFW_CMD_SET_INTRQ_SIZE = 13, /* in bytes */
+#define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK (1 << 31)
+
+ /* command to bring ethernet interface up. Above parameters
+ * (plus mtu & mac address) must have been exchanged prior
+ * to issuing this command */
+ MXGEFW_CMD_ETHERNET_UP = 14,
+
+ /* command to bring ethernet interface down. No further sends
+ * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP
+ * is issued, and all interrupt queues must be flushed prior
+ * to ack'ing this command */
+
+ MXGEFW_CMD_ETHERNET_DOWN = 15,
+
+ /* commands the driver may issue live, without resetting
+ * the nic. Note that increasing the mtu "live" should
+ * only be done if the driver has already supplied buffers
+ * sufficiently large to handle the new mtu. Decreasing
+ * the mtu live is safe */
+
+ MXGEFW_CMD_SET_MTU = 16,
+ MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET = 17, /* in microseconds */
+ MXGEFW_CMD_SET_STATS_INTERVAL = 18, /* in microseconds */
+ MXGEFW_CMD_SET_STATS_DMA_OBSOLETE = 19, /* replaced by SET_STATS_DMA_V2 */
+
+ MXGEFW_ENABLE_PROMISC = 20,
+ MXGEFW_DISABLE_PROMISC = 21,
+ MXGEFW_SET_MAC_ADDRESS = 22,
+
+ MXGEFW_ENABLE_FLOW_CONTROL = 23,
+ MXGEFW_DISABLE_FLOW_CONTROL = 24,
+
+ /* do a DMA test
+ * data0,data1 = DMA address
+ * data2 = RDMA length (MSH), WDMA length (LSH)
+ * command return data = repetitions (MSH), 0.5-ms ticks (LSH)
+ */
+ MXGEFW_DMA_TEST = 25,
+
+ MXGEFW_ENABLE_ALLMULTI = 26,
+ MXGEFW_DISABLE_ALLMULTI = 27,
+
+ /* returns MXGEFW_CMD_ERROR_MULTICAST
+ * if there is no room in the cache
+ * data0,MSH(data1) = multicast group address */
+ MXGEFW_JOIN_MULTICAST_GROUP = 28,
+ /* returns MXGEFW_CMD_ERROR_MULTICAST
+ * if the address is not in the cache,
+ * or is equal to FF-FF-FF-FF-FF-FF
+ * data0,MSH(data1) = multicast group address */
+ MXGEFW_LEAVE_MULTICAST_GROUP = 29,
+ MXGEFW_LEAVE_ALL_MULTICAST_GROUPS = 30,
+
+ MXGEFW_CMD_SET_STATS_DMA_V2 = 31,
+ /* data0, data1 = bus addr,
+ * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
+ * adding new stuff to mcp_irq_data without changing the ABI
+ *
+ * If multiple slices are used, data2 contains both the size of the
+ * structure (in the lower 16 bits) and the slice number
+ * (in the upper 16 bits).
+ */
+
+ MXGEFW_CMD_UNALIGNED_TEST = 32,
+ /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
+ * chipset */
+
+ MXGEFW_CMD_UNALIGNED_STATUS = 33,
+ /* return data = boolean, true if the chipset is known to be unaligned */
+
+ MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS = 34,
+ /* data0 = number of big buffers to use. It must be 0 or a power of 2.
+ * 0 indicates that the NIC consumes as many buffers as they are required
+ * for packet. This is the default behavior.
+ * A power of 2 number indicates that the NIC always uses the specified
+ * number of buffers for each big receive packet.
+ * It is up to the driver to ensure that this value is big enough for
+ * the NIC to be able to receive maximum-sized packets.
+ */
+
+ MXGEFW_CMD_GET_MAX_RSS_QUEUES = 35,
+ MXGEFW_CMD_ENABLE_RSS_QUEUES = 36,
+ /* data0 = number of slices n (0, 1, ..., n-1) to enable
+ * data1 = interrupt mode | use of multiple transmit queues.
+ * 0=share one INTx/MSI.
+ * 1=use one MSI-X per queue.
+ * If all queues share one interrupt, the driver must have set
+ * RSS_SHARED_INTERRUPT_DMA before enabling queues.
+ * 2=enable both receive and send queues.
+ * Without this bit set, only one send queue (slice 0's send queue)
+ * is enabled. The receive queues are always enabled.
+ */
+#define MXGEFW_SLICE_INTR_MODE_SHARED 0x0
+#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1
+#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
+
+ MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET = 37,
+ MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA = 38,
+ /* data0, data1 = bus address lsw, msw */
+ MXGEFW_CMD_GET_RSS_TABLE_OFFSET = 39,
+ /* get the offset of the indirection table */
+ MXGEFW_CMD_SET_RSS_TABLE_SIZE = 40,
+ /* set the size of the indirection table */
+ MXGEFW_CMD_GET_RSS_KEY_OFFSET = 41,
+ /* get the offset of the secret key */
+ MXGEFW_CMD_RSS_KEY_UPDATED = 42,
+ /* tell nic that the secret key's been updated */
+ MXGEFW_CMD_SET_RSS_ENABLE = 43,
+ /* data0 = enable/disable rss
+ * 0: disable rss. nic does not distribute receive packets.
+ * 1: enable rss. nic distributes receive packets among queues.
+ * data1 = hash type
+ * 1: IPV4 (required by RSS)
+ * 2: TCP_IPV4 (required by RSS)
+ * 3: IPV4 | TCP_IPV4 (required by RSS)
+ * 4: source port
+ * 5: source port + destination port
+ */
+#define MXGEFW_RSS_HASH_TYPE_IPV4 0x1
+#define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2
+#define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4
+#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
+#define MXGEFW_RSS_HASH_TYPE_MAX 0x5
+
+ MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE = 44,
+ /* Return data = the max. size of the entire headers of a IPv6 TSO packet.
+ * If the header size of a IPv6 TSO packet is larger than the specified
+ * value, then the driver must not use TSO.
+ * This size restriction only applies to IPv6 TSO.
+ * For IPv4 TSO, the maximum size of the headers is fixed, and the NIC
+ * always has enough header buffer to store maximum-sized headers.
+ */
+
+ MXGEFW_CMD_SET_TSO_MODE = 45,
+ /* data0 = TSO mode.
+ * 0: Linux/FreeBSD style (NIC default)
+ * 1: NDIS/NetBSD style
+ */
+#define MXGEFW_TSO_MODE_LINUX 0
+#define MXGEFW_TSO_MODE_NDIS 1
+
+ MXGEFW_CMD_MDIO_READ = 46,
+ /* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */
+ MXGEFW_CMD_MDIO_WRITE = 47,
+ /* data0 = dev_addr, data1 = register/addr, data2 = value */
+
+ MXGEFW_CMD_I2C_READ = 48,
+ /* Starts to get a fresh copy of one byte or of the module i2c table, the
+ * obtained data is cached inside the xaui-xfi chip :
+ * data0 : 0 => get one byte, 1=> get 256 bytes
+ * data1 : If data0 == 0: location to refresh
+ * bit 7:0 register location
+ * bit 8:15 is the i2c slave addr (0 is interpreted as 0xA1)
+ * bit 23:16 is the i2c bus number (for multi-port NICs)
+ * If data0 == 1: unused
+ * The operation might take ~1ms for a single byte or ~65ms when refreshing all 256 bytes
+ * During the i2c operation, MXGEFW_CMD_I2C_READ or MXGEFW_CMD_I2C_BYTE attempts
+ * will return MXGEFW_CMD_ERROR_BUSY
+ */
+ MXGEFW_CMD_I2C_BYTE = 49,
+ /* Return the last obtained copy of a given byte in the xfp i2c table
+ * (copy cached during the last relevant MXGEFW_CMD_I2C_READ)
+ * data0 : index of the desired table entry
+ * Return data = the byte stored at the requested index in the table
+ */
+
+ MXGEFW_CMD_GET_VPUMP_OFFSET = 50,
+ /* Return data = NIC memory offset of mcp_vpump_public_global */
+ MXGEFW_CMD_RESET_VPUMP = 51,
+ /* Resets the VPUMP state */
+
+ MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE = 52,
+ /* data0 = mcp_slot type to use.
+ * 0 = the default 4B mcp_slot
+ * 1 = 8B mcp_slot_8
+ */
+#define MXGEFW_RSS_MCP_SLOT_TYPE_MIN 0
+#define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH 1
+
+ MXGEFW_CMD_SET_THROTTLE_FACTOR = 53,
+ /* set the throttle factor for ethp_z8e
+ * data0 = throttle_factor
+ * throttle_factor = 256 * pcie-raw-speed / tx_speed
+ * tx_speed = 256 * pcie-raw-speed / throttle_factor
+ *
+ * For PCI-E x8: pcie-raw-speed == 16Gb/s
+ * For PCI-E x4: pcie-raw-speed == 8Gb/s
+ *
+ * ex1: throttle_factor == 0x1a0 (416), tx_speed == 1.23GB/s == 9.846 Gb/s
+ * ex2: throttle_factor == 0x200 (512), tx_speed == 1.0GB/s == 8 Gb/s
+ *
+ * with tx_boundary == 2048, max-throttle-factor == 8191 => min-speed == 500Mb/s
+ * with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s
+ */
+
+ MXGEFW_CMD_VPUMP_UP = 54,
+ /* Allocates VPump Connection, Send Request and Zero copy buffer address tables */
+ MXGEFW_CMD_GET_VPUMP_CLK = 55,
+ /* Get the lanai clock */
+
+ MXGEFW_CMD_GET_DCA_OFFSET = 56,
+ /* offset of dca control for WDMAs */
+
+ /* VMware NetQueue commands */
+ MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE = 57,
+ MXGEFW_CMD_NETQ_ADD_FILTER = 58,
+ /* data0 = filter_id << 16 | queue << 8 | type */
+ /* data1 = MS4 of MAC Addr */
+ /* data2 = LS2_MAC << 16 | VLAN_tag */
+ MXGEFW_CMD_NETQ_DEL_FILTER = 59,
+ /* data0 = filter_id */
+ MXGEFW_CMD_NETQ_QUERY1 = 60,
+ MXGEFW_CMD_NETQ_QUERY2 = 61,
+ MXGEFW_CMD_NETQ_QUERY3 = 62,
+ MXGEFW_CMD_NETQ_QUERY4 = 63,
+
+ MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT = 64,
+ /* When set, small receive buffers can cross page boundaries.
+ * Both small and big receive buffers may start at any address.
+ * This option has performance implications, so use with caution.
+ */
+};
+
+enum myri10ge_mcp_cmd_status {
+ MXGEFW_CMD_OK = 0,
+ MXGEFW_CMD_UNKNOWN = 1,
+ MXGEFW_CMD_ERROR_RANGE = 2,
+ MXGEFW_CMD_ERROR_BUSY = 3,
+ MXGEFW_CMD_ERROR_EMPTY = 4,
+ MXGEFW_CMD_ERROR_CLOSED = 5,
+ MXGEFW_CMD_ERROR_HASH_ERROR = 6,
+ MXGEFW_CMD_ERROR_BAD_PORT = 7,
+ MXGEFW_CMD_ERROR_RESOURCES = 8,
+ MXGEFW_CMD_ERROR_MULTICAST = 9,
+ MXGEFW_CMD_ERROR_UNALIGNED = 10,
+ MXGEFW_CMD_ERROR_NO_MDIO = 11,
+ MXGEFW_CMD_ERROR_I2C_FAILURE = 12,
+ MXGEFW_CMD_ERROR_I2C_ABSENT = 13,
+ MXGEFW_CMD_ERROR_BAD_PCIE_LINK = 14
+};
+
+#define MXGEFW_OLD_IRQ_DATA_LEN 40
+
+struct mcp_irq_data {
+ /* add new counters at the beginning */
+ __be32 future_use[1];
+ __be32 dropped_pause;
+ __be32 dropped_unicast_filtered;
+ __be32 dropped_bad_crc32;
+ __be32 dropped_bad_phy;
+ __be32 dropped_multicast_filtered;
+ /* 40 Bytes */
+ __be32 send_done_count;
+
+#define MXGEFW_LINK_DOWN 0
+#define MXGEFW_LINK_UP 1
+#define MXGEFW_LINK_MYRINET 2
+#define MXGEFW_LINK_UNKNOWN 3
+ __be32 link_up;
+ __be32 dropped_link_overflow;
+ __be32 dropped_link_error_or_filtered;
+ __be32 dropped_runt;
+ __be32 dropped_overrun;
+ __be32 dropped_no_small_buffer;
+ __be32 dropped_no_big_buffer;
+ __be32 rdma_tags_available;
+
+ u8 tx_stopped;
+ u8 link_down;
+ u8 stats_updated;
+ u8 valid;
+};
+
+/* definitions for NETQ filter type */
+#define MXGEFW_NETQ_FILTERTYPE_NONE 0
+#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1
+#define MXGEFW_NETQ_FILTERTYPE_VLAN 2
+#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3
+
+#endif /* __MYRI10GE_MCP_H__ */
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
new file mode 100644
index 000000000..75ec5e7cf
--- /dev/null
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
@@ -0,0 +1,60 @@
+#ifndef __MYRI10GE_MCP_GEN_HEADER_H__
+#define __MYRI10GE_MCP_GEN_HEADER_H__
+
+
+#define MCP_HEADER_PTR_OFFSET 0x3c
+
+#define MCP_TYPE_MX 0x4d582020 /* "MX " */
+#define MCP_TYPE_PCIE 0x70636965 /* "PCIE" pcie-only MCP */
+#define MCP_TYPE_ETH 0x45544820 /* "ETH " */
+#define MCP_TYPE_MCP0 0x4d435030 /* "MCP0" */
+#define MCP_TYPE_DFLT 0x20202020 /* " " */
+#define MCP_TYPE_ETHZ 0x4554485a /* "ETHZ" */
+
+struct mcp_gen_header {
+ /* the first 4 fields are filled at compile time */
+ unsigned header_length;
+ __be32 mcp_type;
+ char version[128];
+ unsigned mcp_private; /* pointer to mcp-type specific structure */
+
+ /* filled by the MCP at run-time */
+ unsigned sram_size;
+ unsigned string_specs; /* either the original STRING_SPECS or a superset */
+ unsigned string_specs_len;
+
+ /* Fields above this comment are guaranteed to be present.
+ *
+ * Fields below this comment are extensions added in later versions
+ * of this struct, drivers should compare the header_length against
+ * offsetof(field) to check whether a given MCP implements them.
+ *
+ * Never remove any field. Keep everything naturally align.
+ */
+
+ /* Specifies if the running mcp is mcp0, 1, or 2. */
+ unsigned char mcp_index;
+ unsigned char disable_rabbit;
+ unsigned char unaligned_tlp;
+ unsigned char pcie_link_algo;
+ unsigned counters_addr;
+ unsigned copy_block_info; /* for small mcps loaded with "lload -d" */
+ unsigned short handoff_id_major; /* must be equal */
+ unsigned short handoff_id_caps; /* bitfield: new mcp must have superset */
+ unsigned msix_table_addr; /* start address of msix table in firmware */
+ unsigned bss_addr; /* start of bss */
+ unsigned features;
+ unsigned ee_hdr_addr;
+ unsigned led_pattern;
+ unsigned led_pattern_dflt;
+ /* 8 */
+};
+
+struct zmcp_info {
+ unsigned info_len;
+ unsigned zmcp_addr;
+ unsigned zmcp_len;
+ unsigned mcp_edata;
+};
+
+#endif /* __MYRI10GE_MCP_GEN_HEADER_H__ */