1 files changed, 96 insertions, 0 deletions
diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
new file mode 100644
index 000000000..d49cba129
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -0,0 +1,96 @@
+#
+# QLogic network device configuration
+#
+
+config NET_VENDOR_QLOGIC
+	bool "QLogic devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about QLogic cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_QLOGIC
+
+config QLA3XXX
+	tristate "QLogic QLA3XXX Network Driver Support"
+	depends on PCI
+	---help---
+	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qla3xxx.
+
+config QLCNIC
+	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+	depends on PCI
+	select FW_LOADER
+	---help---
+	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+	  devices.
+
+config QLCNIC_SRIOV
+	bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
+	depends on QLCNIC && PCI_IOV
+	default y
+	---help---
+	  This configuration parameter enables Single Root Input Output
+	  Virtualization support for QLE83XX Converged Ethernet devices.
+	  This allows for virtual function acceleration in virtualized
+	  environments.
+
+config QLCNIC_DCB
+	bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
+	depends on QLCNIC && DCB
+	default y
+	---help---
+	  This configuration parameter enables DCB support in QLE83XX
+	  and QLE82XX Converged Ethernet devices. This allows for DCB
+	  get operations support through rtNetlink interface. Only CEE
+	  mode of DCB is supported. PG and PFC values are related only
+	  to Tx.
+
+config QLCNIC_VXLAN
+	bool "Virtual eXtensible Local Area Network (VXLAN) offload support"
+	default n
+	depends on QLCNIC && VXLAN && !(QLCNIC=y && VXLAN=m)
+	---help---
+	  This enables hardware offload support for VXLAN protocol over QLogic's
+	  84XX series adapters.
+	  Say Y here if you want to enable hardware offload support for
+	  Virtual eXtensible Local Area Network (VXLAN) in the driver.
+
+config QLCNIC_HWMON
+	bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
+	depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
+	default y
+	---help---
+	  This configuration parameter can be used to read the
+	  board temperature in Converged Ethernet devices
+	  supported by qlcnic.
+
+	  This data is available via the hwmon sysfs interface.
+
+config QLGE
+	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+	depends on PCI
+	---help---
+	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qlge.
+
+config NETXEN_NIC
+	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+	depends on PCI
+	select FW_LOADER
+	---help---
+	  This enables the support for NetXen's Gigabit Ethernet card.
+
+endif # NET_VENDOR_QLOGIC