diff options
Diffstat (limited to 'drivers/net/ethernet/smsc/smc911x.c')
-rw-r--r-- | drivers/net/ethernet/smsc/smc911x.c | 2179 |
1 files changed, 2179 insertions, 0 deletions
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c new file mode 100644 index 000000000..bd64eb982 --- /dev/null +++ b/drivers/net/ethernet/smsc/smc911x.c @@ -0,0 +1,2179 @@ +/* + * smc911x.c + * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices. + * + * Copyright (C) 2005 Sensoria Corp + * Derived from the unified SMC91x driver by Nicolas Pitre + * and the smsc911x.c reference driver by SMSC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Arguments: + * watchdog = TX watchdog timeout + * tx_fifo_kb = Size of TX FIFO in KB + * + * History: + * 04/16/05 Dustin McIntire Initial version + */ +static const char version[] = + "smc911x.c: v1.0 04-16-2005 by Dustin McIntire <dustin@sensoria.com>\n"; + +/* Debugging options */ +#define ENABLE_SMC_DEBUG_RX 0 +#define ENABLE_SMC_DEBUG_TX 0 +#define ENABLE_SMC_DEBUG_DMA 0 +#define ENABLE_SMC_DEBUG_PKTS 0 +#define ENABLE_SMC_DEBUG_MISC 0 +#define ENABLE_SMC_DEBUG_FUNC 0 + +#define SMC_DEBUG_RX ((ENABLE_SMC_DEBUG_RX ? 1 : 0) << 0) +#define SMC_DEBUG_TX ((ENABLE_SMC_DEBUG_TX ? 1 : 0) << 1) +#define SMC_DEBUG_DMA ((ENABLE_SMC_DEBUG_DMA ? 1 : 0) << 2) +#define SMC_DEBUG_PKTS ((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3) +#define SMC_DEBUG_MISC ((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4) +#define SMC_DEBUG_FUNC ((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5) + +#ifndef SMC_DEBUG +#define SMC_DEBUG ( SMC_DEBUG_RX | \ + SMC_DEBUG_TX | \ + SMC_DEBUG_DMA | \ + SMC_DEBUG_PKTS | \ + SMC_DEBUG_MISC | \ + SMC_DEBUG_FUNC \ + ) +#endif + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/crc32.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/workqueue.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <asm/io.h> + +#include "smc911x.h" + +/* + * Transmit timeout, default 5 seconds. + */ +static int watchdog = 5000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +static int tx_fifo_kb=8; +module_param(tx_fifo_kb, int, 0400); +MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)"); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:smc911x"); + +/* + * The internal workings of the driver. If you are changing anything + * here with the SMC stuff, you should have the datasheet and know + * what you are doing. + */ +#define CARDNAME "smc911x" + +/* + * Use power-down feature of the chip + */ +#define POWER_DOWN 1 + +#if SMC_DEBUG > 0 +#define DBG(n, dev, args...) \ + do { \ + if (SMC_DEBUG & (n)) \ + netdev_dbg(dev, args); \ + } while (0) + +#define PRINTK(dev, args...) netdev_info(dev, args) +#else +#define DBG(n, dev, args...) do { } while (0) +#define PRINTK(dev, args...) netdev_dbg(dev, args) +#endif + +#if SMC_DEBUG_PKTS > 0 +static void PRINT_PKT(u_char *buf, int length) +{ + int i; + int remainder; + int lines; + + lines = length / 16; + remainder = length % 16; + + for (i = 0; i < lines ; i ++) { + int cur; + printk(KERN_DEBUG); + for (cur = 0; cur < 8; cur++) { + u_char a, b; + a = *buf++; + b = *buf++; + pr_cont("%02x%02x ", a, b); + } + pr_cont("\n"); + } + printk(KERN_DEBUG); + for (i = 0; i < remainder/2 ; i++) { + u_char a, b; + a = *buf++; + b = *buf++; + pr_cont("%02x%02x ", a, b); + } + pr_cont("\n"); +} +#else +#define PRINT_PKT(x...) do { } while (0) +#endif + + +/* this enables an interrupt in the interrupt mask register */ +#define SMC_ENABLE_INT(lp, x) do { \ + unsigned int __mask; \ + __mask = SMC_GET_INT_EN((lp)); \ + __mask |= (x); \ + SMC_SET_INT_EN((lp), __mask); \ +} while (0) + +/* this disables an interrupt from the interrupt mask register */ +#define SMC_DISABLE_INT(lp, x) do { \ + unsigned int __mask; \ + __mask = SMC_GET_INT_EN((lp)); \ + __mask &= ~(x); \ + SMC_SET_INT_EN((lp), __mask); \ +} while (0) + +/* + * this does a soft reset on the device + */ +static void smc911x_reset(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int reg, timeout=0, resets=1, irq_cfg; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + /* Take out of PM setting first */ + if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) { + /* Write to the bytetest will take out of powerdown */ + SMC_SET_BYTE_TEST(lp, 0); + timeout=10; + do { + udelay(10); + reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_; + } while (--timeout && !reg); + if (timeout == 0) { + PRINTK(dev, "smc911x_reset timeout waiting for PM restore\n"); + return; + } + } + + /* Disable all interrupts */ + spin_lock_irqsave(&lp->lock, flags); + SMC_SET_INT_EN(lp, 0); + spin_unlock_irqrestore(&lp->lock, flags); + + while (resets--) { + SMC_SET_HW_CFG(lp, HW_CFG_SRST_); + timeout=10; + do { + udelay(10); + reg = SMC_GET_HW_CFG(lp); + /* If chip indicates reset timeout then try again */ + if (reg & HW_CFG_SRST_TO_) { + PRINTK(dev, "chip reset timeout, retrying...\n"); + resets++; + break; + } + } while (--timeout && (reg & HW_CFG_SRST_)); + } + if (timeout == 0) { + PRINTK(dev, "smc911x_reset timeout waiting for reset\n"); + return; + } + + /* make sure EEPROM has finished loading before setting GPIO_CFG */ + timeout=1000; + while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) + udelay(10); + + if (timeout == 0){ + PRINTK(dev, "smc911x_reset timeout waiting for EEPROM busy\n"); + return; + } + + /* Initialize interrupts */ + SMC_SET_INT_EN(lp, 0); + SMC_ACK_INT(lp, -1); + + /* Reset the FIFO level and flow control settings */ + SMC_SET_HW_CFG(lp, (lp->tx_fifo_kb & 0xF) << 16); +//TODO: Figure out what appropriate pause time is + SMC_SET_FLOW(lp, FLOW_FCPT_ | FLOW_FCEN_); + SMC_SET_AFC_CFG(lp, lp->afc_cfg); + + + /* Set to LED outputs */ + SMC_SET_GPIO_CFG(lp, 0x70070000); + + /* + * Deassert IRQ for 1*10us for edge type interrupts + * and drive IRQ pin push-pull + */ + irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_; +#ifdef SMC_DYNAMIC_BUS_CONFIG + if (lp->cfg.irq_polarity) + irq_cfg |= INT_CFG_IRQ_POL_; +#endif + SMC_SET_IRQ_CFG(lp, irq_cfg); + + /* clear anything saved */ + if (lp->pending_tx_skb != NULL) { + dev_kfree_skb (lp->pending_tx_skb); + lp->pending_tx_skb = NULL; + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + } +} + +/* + * Enable Interrupts, Receive, and Transmit + */ +static void smc911x_enable(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned mask, cfg, cr; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + spin_lock_irqsave(&lp->lock, flags); + + SMC_SET_MAC_ADDR(lp, dev->dev_addr); + + /* Enable TX */ + cfg = SMC_GET_HW_CFG(lp); + cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF; + cfg |= HW_CFG_SF_; + SMC_SET_HW_CFG(lp, cfg); + SMC_SET_FIFO_TDA(lp, 0xFF); + /* Update TX stats on every 64 packets received or every 1 sec */ + SMC_SET_FIFO_TSL(lp, 64); + SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); + + SMC_GET_MAC_CR(lp, cr); + cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_; + SMC_SET_MAC_CR(lp, cr); + SMC_SET_TX_CFG(lp, TX_CFG_TX_ON_); + + /* Add 2 byte padding to start of packets */ + SMC_SET_RX_CFG(lp, (2<<8) & RX_CFG_RXDOFF_); + + /* Turn on receiver and enable RX */ + if (cr & MAC_CR_RXEN_) + DBG(SMC_DEBUG_RX, dev, "Receiver already enabled\n"); + + SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_); + + /* Interrupt on every received packet */ + SMC_SET_FIFO_RSA(lp, 0x01); + SMC_SET_FIFO_RSL(lp, 0x00); + + /* now, enable interrupts */ + mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ | + INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ | + INT_EN_PHY_INT_EN_; + if (IS_REV_A(lp->revision)) + mask|=INT_EN_RDFL_EN_; + else { + mask|=INT_EN_RDFO_EN_; + } + SMC_ENABLE_INT(lp, mask); + + spin_unlock_irqrestore(&lp->lock, flags); +} + +/* + * this puts the device in an inactive state + */ +static void smc911x_shutdown(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned cr; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "%s: --> %s\n", CARDNAME, __func__); + + /* Disable IRQ's */ + SMC_SET_INT_EN(lp, 0); + + /* Turn of Rx and TX */ + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MAC_CR(lp, cr); + cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); + SMC_SET_MAC_CR(lp, cr); + SMC_SET_TX_CFG(lp, TX_CFG_STOP_TX_); + spin_unlock_irqrestore(&lp->lock, flags); +} + +static inline void smc911x_drop_pkt(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int fifo_count, timeout, reg; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "%s: --> %s\n", + CARDNAME, __func__); + fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF; + if (fifo_count <= 4) { + /* Manually dump the packet data */ + while (fifo_count--) + SMC_GET_RX_FIFO(lp); + } else { + /* Fast forward through the bad packet */ + SMC_SET_RX_DP_CTRL(lp, RX_DP_CTRL_FFWD_BUSY_); + timeout=50; + do { + udelay(10); + reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_; + } while (--timeout && reg); + if (timeout == 0) { + PRINTK(dev, "timeout waiting for RX fast forward\n"); + } + } +} + +/* + * This is the procedure to handle the receipt of a packet. + * It should be called after checking for packet presence in + * the RX status FIFO. It must be called with the spin lock + * already held. + */ +static inline void smc911x_rcv(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int pkt_len, status; + struct sk_buff *skb; + unsigned char *data; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "--> %s\n", + __func__); + status = SMC_GET_RX_STS_FIFO(lp); + DBG(SMC_DEBUG_RX, dev, "Rx pkt len %d status 0x%08x\n", + (status & 0x3fff0000) >> 16, status & 0xc000ffff); + pkt_len = (status & RX_STS_PKT_LEN_) >> 16; + if (status & RX_STS_ES_) { + /* Deal with a bad packet */ + dev->stats.rx_errors++; + if (status & RX_STS_CRC_ERR_) + dev->stats.rx_crc_errors++; + else { + if (status & RX_STS_LEN_ERR_) + dev->stats.rx_length_errors++; + if (status & RX_STS_MCAST_) + dev->stats.multicast++; + } + /* Remove the bad packet data from the RX FIFO */ + smc911x_drop_pkt(dev); + } else { + /* Receive a valid packet */ + /* Alloc a buffer with extra room for DMA alignment */ + skb = netdev_alloc_skb(dev, pkt_len+32); + if (unlikely(skb == NULL)) { + PRINTK(dev, "Low memory, rcvd packet dropped.\n"); + dev->stats.rx_dropped++; + smc911x_drop_pkt(dev); + return; + } + /* Align IP header to 32 bits + * Note that the device is configured to add a 2 + * byte padding to the packet start, so we really + * want to write to the orignal data pointer */ + data = skb->data; + skb_reserve(skb, 2); + skb_put(skb,pkt_len-4); +#ifdef SMC_USE_DMA + { + unsigned int fifo; + /* Lower the FIFO threshold if possible */ + fifo = SMC_GET_FIFO_INT(lp); + if (fifo & 0xFF) fifo--; + DBG(SMC_DEBUG_RX, dev, "Setting RX stat FIFO threshold to %d\n", + fifo & 0xff); + SMC_SET_FIFO_INT(lp, fifo); + /* Setup RX DMA */ + SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_)); + lp->rxdma_active = 1; + lp->current_rx_skb = skb; + SMC_PULL_DATA(lp, data, (pkt_len+2+15) & ~15); + /* Packet processing deferred to DMA RX interrupt */ + } +#else + SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_)); + SMC_PULL_DATA(lp, data, pkt_len+2+3); + + DBG(SMC_DEBUG_PKTS, dev, "Received packet\n"); + PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len-4; +#endif + } +} + +/* + * This is called to actually send a packet to the chip. + */ +static void smc911x_hardware_send_pkt(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + struct sk_buff *skb; + unsigned int cmdA, cmdB, len; + unsigned char *buf; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", __func__); + BUG_ON(lp->pending_tx_skb == NULL); + + skb = lp->pending_tx_skb; + lp->pending_tx_skb = NULL; + + /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */ + /* cmdB {31:16] pkt tag [10:0] length */ +#ifdef SMC_USE_DMA + /* 16 byte buffer alignment mode */ + buf = (char*)((u32)(skb->data) & ~0xF); + len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF; + cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) | + TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | + skb->len; +#else + buf = (char*)((u32)skb->data & ~0x3); + len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3; + cmdA = (((u32)skb->data & 0x3) << 16) | + TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | + skb->len; +#endif + /* tag is packet length so we can use this in stats update later */ + cmdB = (skb->len << 16) | (skb->len & 0x7FF); + + DBG(SMC_DEBUG_TX, dev, "TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n", + len, len, buf, cmdA, cmdB); + SMC_SET_TX_FIFO(lp, cmdA); + SMC_SET_TX_FIFO(lp, cmdB); + + DBG(SMC_DEBUG_PKTS, dev, "Transmitted packet\n"); + PRINT_PKT(buf, len <= 64 ? len : 64); + + /* Send pkt via PIO or DMA */ +#ifdef SMC_USE_DMA + lp->current_tx_skb = skb; + SMC_PUSH_DATA(lp, buf, len); + /* DMA complete IRQ will free buffer and set jiffies */ +#else + SMC_PUSH_DATA(lp, buf, len); + dev->trans_start = jiffies; + dev_kfree_skb_irq(skb); +#endif + if (!lp->tx_throttle) { + netif_wake_queue(dev); + } + SMC_ENABLE_INT(lp, INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_); +} + +/* + * Since I am not sure if I will have enough room in the chip's ram + * to store the packet, I call this routine which either sends it + * now, or set the card to generates an interrupt when ready + * for the packet. + */ +static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int free; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", + __func__); + + spin_lock_irqsave(&lp->lock, flags); + + BUG_ON(lp->pending_tx_skb != NULL); + + free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_; + DBG(SMC_DEBUG_TX, dev, "TX free space %d\n", free); + + /* Turn off the flow when running out of space in FIFO */ + if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) { + DBG(SMC_DEBUG_TX, dev, "Disabling data flow due to low FIFO space (%d)\n", + free); + /* Reenable when at least 1 packet of size MTU present */ + SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64); + lp->tx_throttle = 1; + netif_stop_queue(dev); + } + + /* Drop packets when we run out of space in TX FIFO + * Account for overhead required for: + * + * Tx command words 8 bytes + * Start offset 15 bytes + * End padding 15 bytes + */ + if (unlikely(free < (skb->len + 8 + 15 + 15))) { + netdev_warn(dev, "No Tx free space %d < %d\n", + free, skb->len); + lp->pending_tx_skb = NULL; + dev->stats.tx_errors++; + dev->stats.tx_dropped++; + spin_unlock_irqrestore(&lp->lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + +#ifdef SMC_USE_DMA + { + /* If the DMA is already running then defer this packet Tx until + * the DMA IRQ starts it + */ + if (lp->txdma_active) { + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Tx DMA running, deferring packet\n"); + lp->pending_tx_skb = skb; + netif_stop_queue(dev); + spin_unlock_irqrestore(&lp->lock, flags); + return NETDEV_TX_OK; + } else { + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Activating Tx DMA\n"); + lp->txdma_active = 1; + } + } +#endif + lp->pending_tx_skb = skb; + smc911x_hardware_send_pkt(dev); + spin_unlock_irqrestore(&lp->lock, flags); + + return NETDEV_TX_OK; +} + +/* + * This handles a TX status interrupt, which is only called when: + * - a TX error occurred, or + * - TX of a packet completed. + */ +static void smc911x_tx(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int tx_status; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", + __func__); + + /* Collect the TX status */ + while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) { + DBG(SMC_DEBUG_TX, dev, "Tx stat FIFO used 0x%04x\n", + (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16); + tx_status = SMC_GET_TX_STS_FIFO(lp); + dev->stats.tx_packets++; + dev->stats.tx_bytes+=tx_status>>16; + DBG(SMC_DEBUG_TX, dev, "Tx FIFO tag 0x%04x status 0x%04x\n", + (tx_status & 0xffff0000) >> 16, + tx_status & 0x0000ffff); + /* count Tx errors, but ignore lost carrier errors when in + * full-duplex mode */ + if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx && + !(tx_status & 0x00000306))) { + dev->stats.tx_errors++; + } + if (tx_status & TX_STS_MANY_COLL_) { + dev->stats.collisions+=16; + dev->stats.tx_aborted_errors++; + } else { + dev->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3; + } + /* carrier error only has meaning for half-duplex communication */ + if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) && + !lp->ctl_rfduplx) { + dev->stats.tx_carrier_errors++; + } + if (tx_status & TX_STS_LATE_COLL_) { + dev->stats.collisions++; + dev->stats.tx_aborted_errors++; + } + } +} + + +/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ +/* + * Reads a register from the MII Management serial interface + */ + +static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int phydata; + + SMC_GET_MII(lp, phyreg, phyaddr, phydata); + + DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n", + __func__, phyaddr, phyreg, phydata); + return phydata; +} + + +/* + * Writes a register to the MII Management serial interface + */ +static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg, + int phydata) +{ + struct smc911x_local *lp = netdev_priv(dev); + + DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", + __func__, phyaddr, phyreg, phydata); + + SMC_SET_MII(lp, phyreg, phyaddr, phydata); +} + +/* + * Finds and reports the PHY address (115 and 117 have external + * PHY interface 118 has internal only + */ +static void smc911x_phy_detect(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int phyaddr; + unsigned int cfg, id1, id2; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + lp->phy_type = 0; + + /* + * Scan all 32 PHY addresses if necessary, starting at + * PHY#1 to PHY#31, and then PHY#0 last. + */ + switch(lp->version) { + case CHIP_9115: + case CHIP_9117: + case CHIP_9215: + case CHIP_9217: + cfg = SMC_GET_HW_CFG(lp); + if (cfg & HW_CFG_EXT_PHY_DET_) { + cfg &= ~HW_CFG_PHY_CLK_SEL_; + cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; + SMC_SET_HW_CFG(lp, cfg); + udelay(10); /* Wait for clocks to stop */ + + cfg |= HW_CFG_EXT_PHY_EN_; + SMC_SET_HW_CFG(lp, cfg); + udelay(10); /* Wait for clocks to stop */ + + cfg &= ~HW_CFG_PHY_CLK_SEL_; + cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; + SMC_SET_HW_CFG(lp, cfg); + udelay(10); /* Wait for clocks to stop */ + + cfg |= HW_CFG_SMI_SEL_; + SMC_SET_HW_CFG(lp, cfg); + + for (phyaddr = 1; phyaddr < 32; ++phyaddr) { + + /* Read the PHY identifiers */ + SMC_GET_PHY_ID1(lp, phyaddr & 31, id1); + SMC_GET_PHY_ID2(lp, phyaddr & 31, id2); + + /* Make sure it is a valid identifier */ + if (id1 != 0x0000 && id1 != 0xffff && + id1 != 0x8000 && id2 != 0x0000 && + id2 != 0xffff && id2 != 0x8000) { + /* Save the PHY's address */ + lp->mii.phy_id = phyaddr & 31; + lp->phy_type = id1 << 16 | id2; + break; + } + } + if (phyaddr < 32) + /* Found an external PHY */ + break; + } + default: + /* Internal media only */ + SMC_GET_PHY_ID1(lp, 1, id1); + SMC_GET_PHY_ID2(lp, 1, id2); + /* Save the PHY's address */ + lp->mii.phy_id = 1; + lp->phy_type = id1 << 16 | id2; + } + + DBG(SMC_DEBUG_MISC, dev, "phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%x\n", + id1, id2, lp->mii.phy_id); +} + +/* + * Sets the PHY to a configuration as determined by the user. + * Called with spin_lock held. + */ +static int smc911x_phy_fixed(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int phyaddr = lp->mii.phy_id; + int bmcr; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + /* Enter Link Disable state */ + SMC_GET_PHY_BMCR(lp, phyaddr, bmcr); + bmcr |= BMCR_PDOWN; + SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); + + /* + * Set our fixed capabilities + * Disable auto-negotiation + */ + bmcr &= ~BMCR_ANENABLE; + if (lp->ctl_rfduplx) + bmcr |= BMCR_FULLDPLX; + + if (lp->ctl_rspeed == 100) + bmcr |= BMCR_SPEED100; + + /* Write our capabilities to the phy control register */ + SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); + + /* Re-Configure the Receive/Phy Control register */ + bmcr &= ~BMCR_PDOWN; + SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); + + return 1; +} + +/** + * smc911x_phy_reset - reset the phy + * @dev: net device + * @phy: phy address + * + * Issue a software reset for the specified PHY and + * wait up to 100ms for the reset to complete. We should + * not access the PHY for 50ms after issuing the reset. + * + * The time to wait appears to be dependent on the PHY. + * + */ +static int smc911x_phy_reset(struct net_device *dev, int phy) +{ + struct smc911x_local *lp = netdev_priv(dev); + int timeout; + unsigned long flags; + unsigned int reg; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__); + + spin_lock_irqsave(&lp->lock, flags); + reg = SMC_GET_PMT_CTRL(lp); + reg &= ~0xfffff030; + reg |= PMT_CTRL_PHY_RST_; + SMC_SET_PMT_CTRL(lp, reg); + spin_unlock_irqrestore(&lp->lock, flags); + for (timeout = 2; timeout; timeout--) { + msleep(50); + spin_lock_irqsave(&lp->lock, flags); + reg = SMC_GET_PMT_CTRL(lp); + spin_unlock_irqrestore(&lp->lock, flags); + if (!(reg & PMT_CTRL_PHY_RST_)) { + /* extra delay required because the phy may + * not be completed with its reset + * when PHY_BCR_RESET_ is cleared. 256us + * should suffice, but use 500us to be safe + */ + udelay(500); + break; + } + } + + return reg & PMT_CTRL_PHY_RST_; +} + +/** + * smc911x_phy_powerdown - powerdown phy + * @dev: net device + * @phy: phy address + * + * Power down the specified PHY + */ +static void smc911x_phy_powerdown(struct net_device *dev, int phy) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int bmcr; + + /* Enter Link Disable state */ + SMC_GET_PHY_BMCR(lp, phy, bmcr); + bmcr |= BMCR_PDOWN; + SMC_SET_PHY_BMCR(lp, phy, bmcr); +} + +/** + * smc911x_phy_check_media - check the media status and adjust BMCR + * @dev: net device + * @init: set true for initialisation + * + * Select duplex mode depending on negotiation state. This + * also updates our carrier state. + */ +static void smc911x_phy_check_media(struct net_device *dev, int init) +{ + struct smc911x_local *lp = netdev_priv(dev); + int phyaddr = lp->mii.phy_id; + unsigned int bmcr, cr; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) { + /* duplex state has changed */ + SMC_GET_PHY_BMCR(lp, phyaddr, bmcr); + SMC_GET_MAC_CR(lp, cr); + if (lp->mii.full_duplex) { + DBG(SMC_DEBUG_MISC, dev, "Configuring for full-duplex mode\n"); + bmcr |= BMCR_FULLDPLX; + cr |= MAC_CR_RCVOWN_; + } else { + DBG(SMC_DEBUG_MISC, dev, "Configuring for half-duplex mode\n"); + bmcr &= ~BMCR_FULLDPLX; + cr &= ~MAC_CR_RCVOWN_; + } + SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); + SMC_SET_MAC_CR(lp, cr); + } +} + +/* + * Configures the specified PHY through the MII management interface + * using Autonegotiation. + * Calls smc911x_phy_fixed() if the user has requested a certain config. + * If RPC ANEG bit is set, the media selection is dependent purely on + * the selection by the MII (either in the MII BMCR reg or the result + * of autonegotiation.) If the RPC ANEG bit is cleared, the selection + * is controlled by the RPC SPEED and RPC DPLX bits. + */ +static void smc911x_phy_configure(struct work_struct *work) +{ + struct smc911x_local *lp = container_of(work, struct smc911x_local, + phy_configure); + struct net_device *dev = lp->netdev; + int phyaddr = lp->mii.phy_id; + int my_phy_caps; /* My PHY capabilities */ + int my_ad_caps; /* My Advertised capabilities */ + int status; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__); + + /* + * We should not be called if phy_type is zero. + */ + if (lp->phy_type == 0) + return; + + if (smc911x_phy_reset(dev, phyaddr)) { + netdev_info(dev, "PHY reset timed out\n"); + return; + } + spin_lock_irqsave(&lp->lock, flags); + + /* + * Enable PHY Interrupts (for register 18) + * Interrupts listed here are enabled + */ + SMC_SET_PHY_INT_MASK(lp, phyaddr, PHY_INT_MASK_ENERGY_ON_ | + PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ | + PHY_INT_MASK_LINK_DOWN_); + + /* If the user requested no auto neg, then go set his request */ + if (lp->mii.force_media) { + smc911x_phy_fixed(dev); + goto smc911x_phy_configure_exit; + } + + /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */ + SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps); + if (!(my_phy_caps & BMSR_ANEGCAPABLE)) { + netdev_info(dev, "Auto negotiation NOT supported\n"); + smc911x_phy_fixed(dev); + goto smc911x_phy_configure_exit; + } + + /* CSMA capable w/ both pauses */ + my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + + if (my_phy_caps & BMSR_100BASE4) + my_ad_caps |= ADVERTISE_100BASE4; + if (my_phy_caps & BMSR_100FULL) + my_ad_caps |= ADVERTISE_100FULL; + if (my_phy_caps & BMSR_100HALF) + my_ad_caps |= ADVERTISE_100HALF; + if (my_phy_caps & BMSR_10FULL) + my_ad_caps |= ADVERTISE_10FULL; + if (my_phy_caps & BMSR_10HALF) + my_ad_caps |= ADVERTISE_10HALF; + + /* Disable capabilities not selected by our user */ + if (lp->ctl_rspeed != 100) + my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF); + + if (!lp->ctl_rfduplx) + my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL); + + /* Update our Auto-Neg Advertisement Register */ + SMC_SET_PHY_MII_ADV(lp, phyaddr, my_ad_caps); + lp->mii.advertising = my_ad_caps; + + /* + * Read the register back. Without this, it appears that when + * auto-negotiation is restarted, sometimes it isn't ready and + * the link does not come up. + */ + udelay(10); + SMC_GET_PHY_MII_ADV(lp, phyaddr, status); + + DBG(SMC_DEBUG_MISC, dev, "phy caps=0x%04x\n", my_phy_caps); + DBG(SMC_DEBUG_MISC, dev, "phy advertised caps=0x%04x\n", my_ad_caps); + + /* Restart auto-negotiation process in order to advertise my caps */ + SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART); + + smc911x_phy_check_media(dev, 1); + +smc911x_phy_configure_exit: + spin_unlock_irqrestore(&lp->lock, flags); +} + +/* + * smc911x_phy_interrupt + * + * Purpose: Handle interrupts relating to PHY register 18. This is + * called from the "hard" interrupt handler under our private spinlock. + */ +static void smc911x_phy_interrupt(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int phyaddr = lp->mii.phy_id; + int status; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + if (lp->phy_type == 0) + return; + + smc911x_phy_check_media(dev, 0); + /* read to clear status bits */ + SMC_GET_PHY_INT_SRC(lp, phyaddr,status); + DBG(SMC_DEBUG_MISC, dev, "PHY interrupt status 0x%04x\n", + status & 0xffff); + DBG(SMC_DEBUG_MISC, dev, "AFC_CFG 0x%08x\n", + SMC_GET_AFC_CFG(lp)); +} + +/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/ + +/* + * This is the main routine of the driver, to handle the device when + * it needs some attention. + */ +static irqreturn_t smc911x_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct smc911x_local *lp = netdev_priv(dev); + unsigned int status, mask, timeout; + unsigned int rx_overrun=0, cr, pkts; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + spin_lock_irqsave(&lp->lock, flags); + + /* Spurious interrupt check */ + if ((SMC_GET_IRQ_CFG(lp) & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) != + (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) { + spin_unlock_irqrestore(&lp->lock, flags); + return IRQ_NONE; + } + + mask = SMC_GET_INT_EN(lp); + SMC_SET_INT_EN(lp, 0); + + /* set a timeout value, so I don't stay here forever */ + timeout = 8; + + + do { + status = SMC_GET_INT(lp); + + DBG(SMC_DEBUG_MISC, dev, "INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n", + status, mask, status & ~mask); + + status &= mask; + if (!status) + break; + + /* Handle SW interrupt condition */ + if (status & INT_STS_SW_INT_) { + SMC_ACK_INT(lp, INT_STS_SW_INT_); + mask &= ~INT_EN_SW_INT_EN_; + } + /* Handle various error conditions */ + if (status & INT_STS_RXE_) { + SMC_ACK_INT(lp, INT_STS_RXE_); + dev->stats.rx_errors++; + } + if (status & INT_STS_RXDFH_INT_) { + SMC_ACK_INT(lp, INT_STS_RXDFH_INT_); + dev->stats.rx_dropped+=SMC_GET_RX_DROP(lp); + } + /* Undocumented interrupt-what is the right thing to do here? */ + if (status & INT_STS_RXDF_INT_) { + SMC_ACK_INT(lp, INT_STS_RXDF_INT_); + } + + /* Rx Data FIFO exceeds set level */ + if (status & INT_STS_RDFL_) { + if (IS_REV_A(lp->revision)) { + rx_overrun=1; + SMC_GET_MAC_CR(lp, cr); + cr &= ~MAC_CR_RXEN_; + SMC_SET_MAC_CR(lp, cr); + DBG(SMC_DEBUG_RX, dev, "RX overrun\n"); + dev->stats.rx_errors++; + dev->stats.rx_fifo_errors++; + } + SMC_ACK_INT(lp, INT_STS_RDFL_); + } + if (status & INT_STS_RDFO_) { + if (!IS_REV_A(lp->revision)) { + SMC_GET_MAC_CR(lp, cr); + cr &= ~MAC_CR_RXEN_; + SMC_SET_MAC_CR(lp, cr); + rx_overrun=1; + DBG(SMC_DEBUG_RX, dev, "RX overrun\n"); + dev->stats.rx_errors++; + dev->stats.rx_fifo_errors++; + } + SMC_ACK_INT(lp, INT_STS_RDFO_); + } + /* Handle receive condition */ + if ((status & INT_STS_RSFL_) || rx_overrun) { + unsigned int fifo; + DBG(SMC_DEBUG_RX, dev, "RX irq\n"); + fifo = SMC_GET_RX_FIFO_INF(lp); + pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16; + DBG(SMC_DEBUG_RX, dev, "Rx FIFO pkts %d, bytes %d\n", + pkts, fifo & 0xFFFF); + if (pkts != 0) { +#ifdef SMC_USE_DMA + unsigned int fifo; + if (lp->rxdma_active){ + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, + "RX DMA active\n"); + /* The DMA is already running so up the IRQ threshold */ + fifo = SMC_GET_FIFO_INT(lp) & ~0xFF; + fifo |= pkts & 0xFF; + DBG(SMC_DEBUG_RX, dev, + "Setting RX stat FIFO threshold to %d\n", + fifo & 0xff); + SMC_SET_FIFO_INT(lp, fifo); + } else +#endif + smc911x_rcv(dev); + } + SMC_ACK_INT(lp, INT_STS_RSFL_); + } + /* Handle transmit FIFO available */ + if (status & INT_STS_TDFA_) { + DBG(SMC_DEBUG_TX, dev, "TX data FIFO space available irq\n"); + SMC_SET_FIFO_TDA(lp, 0xFF); + lp->tx_throttle = 0; +#ifdef SMC_USE_DMA + if (!lp->txdma_active) +#endif + netif_wake_queue(dev); + SMC_ACK_INT(lp, INT_STS_TDFA_); + } + /* Handle transmit done condition */ +#if 1 + if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) { + DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, dev, + "Tx stat FIFO limit (%d) /GPT irq\n", + (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16); + smc911x_tx(dev); + SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); + SMC_ACK_INT(lp, INT_STS_TSFL_); + SMC_ACK_INT(lp, INT_STS_TSFL_ | INT_STS_GPT_INT_); + } +#else + if (status & INT_STS_TSFL_) { + DBG(SMC_DEBUG_TX, dev, "TX status FIFO limit (%d) irq\n", ?); + smc911x_tx(dev); + SMC_ACK_INT(lp, INT_STS_TSFL_); + } + + if (status & INT_STS_GPT_INT_) { + DBG(SMC_DEBUG_RX, dev, "IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n", + SMC_GET_IRQ_CFG(lp), + SMC_GET_FIFO_INT(lp), + SMC_GET_RX_CFG(lp)); + DBG(SMC_DEBUG_RX, dev, "Rx Stat FIFO Used 0x%02x Data FIFO Used 0x%04x Stat FIFO 0x%08x\n", + (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16, + SMC_GET_RX_FIFO_INF(lp) & 0xffff, + SMC_GET_RX_STS_FIFO_PEEK(lp)); + SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); + SMC_ACK_INT(lp, INT_STS_GPT_INT_); + } +#endif + + /* Handle PHY interrupt condition */ + if (status & INT_STS_PHY_INT_) { + DBG(SMC_DEBUG_MISC, dev, "PHY irq\n"); + smc911x_phy_interrupt(dev); + SMC_ACK_INT(lp, INT_STS_PHY_INT_); + } + } while (--timeout); + + /* restore mask state */ + SMC_SET_INT_EN(lp, mask); + + DBG(SMC_DEBUG_MISC, dev, "Interrupt done (%d loops)\n", + 8-timeout); + + spin_unlock_irqrestore(&lp->lock, flags); + + return IRQ_HANDLED; +} + +#ifdef SMC_USE_DMA +static void +smc911x_tx_dma_irq(int dma, void *data) +{ + struct net_device *dev = (struct net_device *)data; + struct smc911x_local *lp = netdev_priv(dev); + struct sk_buff *skb = lp->current_tx_skb; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "TX DMA irq handler\n"); + /* Clear the DMA interrupt sources */ + SMC_DMA_ACK_IRQ(dev, dma); + BUG_ON(skb == NULL); + dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE); + dev->trans_start = jiffies; + dev_kfree_skb_irq(skb); + lp->current_tx_skb = NULL; + if (lp->pending_tx_skb != NULL) + smc911x_hardware_send_pkt(dev); + else { + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, + "No pending Tx packets. DMA disabled\n"); + spin_lock_irqsave(&lp->lock, flags); + lp->txdma_active = 0; + if (!lp->tx_throttle) { + netif_wake_queue(dev); + } + spin_unlock_irqrestore(&lp->lock, flags); + } + + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, + "TX DMA irq completed\n"); +} +static void +smc911x_rx_dma_irq(int dma, void *data) +{ + struct net_device *dev = (struct net_device *)data; + struct smc911x_local *lp = netdev_priv(dev); + struct sk_buff *skb = lp->current_rx_skb; + unsigned long flags; + unsigned int pkts; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, "RX DMA irq handler\n"); + /* Clear the DMA interrupt sources */ + SMC_DMA_ACK_IRQ(dev, dma); + dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE); + BUG_ON(skb == NULL); + lp->current_rx_skb = NULL; + PRINT_PKT(skb->data, skb->len); + skb->protocol = eth_type_trans(skb, dev); + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + netif_rx(skb); + + spin_lock_irqsave(&lp->lock, flags); + pkts = (SMC_GET_RX_FIFO_INF(lp) & RX_FIFO_INF_RXSUSED_) >> 16; + if (pkts != 0) { + smc911x_rcv(dev); + }else { + lp->rxdma_active = 0; + } + spin_unlock_irqrestore(&lp->lock, flags); + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, + "RX DMA irq completed. DMA RX FIFO PKTS %d\n", + pkts); +} +#endif /* SMC_USE_DMA */ + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void smc911x_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + smc911x_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/* Our watchdog timed out. Called by the networking layer */ +static void smc911x_timeout(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int status, mask; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + spin_lock_irqsave(&lp->lock, flags); + status = SMC_GET_INT(lp); + mask = SMC_GET_INT_EN(lp); + spin_unlock_irqrestore(&lp->lock, flags); + DBG(SMC_DEBUG_MISC, dev, "INT 0x%02x MASK 0x%02x\n", + status, mask); + + /* Dump the current TX FIFO contents and restart */ + mask = SMC_GET_TX_CFG(lp); + SMC_SET_TX_CFG(lp, mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_); + /* + * Reconfiguring the PHY doesn't seem like a bad idea here, but + * smc911x_phy_configure() calls msleep() which calls schedule_timeout() + * which calls schedule(). Hence we use a work queue. + */ + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); + + /* We can accept TX packets again */ + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +/* + * This routine will, depending on the values passed to it, + * either make it accept multicast packets, go into + * promiscuous mode (for TCPDUMP and cousins) or accept + * a select set of multicast packets + */ +static void smc911x_set_multicast_list(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int multicast_table[2]; + unsigned int mcr, update_multicast = 0; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MAC_CR(lp, mcr); + spin_unlock_irqrestore(&lp->lock, flags); + + if (dev->flags & IFF_PROMISC) { + + DBG(SMC_DEBUG_MISC, dev, "RCR_PRMS\n"); + mcr |= MAC_CR_PRMS_; + } + /* + * Here, I am setting this to accept all multicast packets. + * I don't need to zero the multicast table, because the flag is + * checked before the table is + */ + else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) { + DBG(SMC_DEBUG_MISC, dev, "RCR_ALMUL\n"); + mcr |= MAC_CR_MCPAS_; + } + + /* + * This sets the internal hardware table to filter out unwanted + * multicast packets before they take up memory. + * + * The SMC chip uses a hash table where the high 6 bits of the CRC of + * address are the offset into the table. If that bit is 1, then the + * multicast packet is accepted. Otherwise, it's dropped silently. + * + * To use the 6 bits as an offset into the table, the high 1 bit is + * the number of the 32 bit register, while the low 5 bits are the bit + * within that register. + */ + else if (!netdev_mc_empty(dev)) { + struct netdev_hw_addr *ha; + + /* Set the Hash perfec mode */ + mcr |= MAC_CR_HPFILT_; + + /* start with a table of all zeros: reject all */ + memset(multicast_table, 0, sizeof(multicast_table)); + + netdev_for_each_mc_addr(ha, dev) { + u32 position; + + /* upper 6 bits are used as hash index */ + position = ether_crc(ETH_ALEN, ha->addr)>>26; + + multicast_table[position>>5] |= 1 << (position&0x1f); + } + + /* be sure I get rid of flags I might have set */ + mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); + + /* now, the table can be loaded into the chipset */ + update_multicast = 1; + } else { + DBG(SMC_DEBUG_MISC, dev, "~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n"); + mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); + + /* + * since I'm disabling all multicast entirely, I need to + * clear the multicast list + */ + memset(multicast_table, 0, sizeof(multicast_table)); + update_multicast = 1; + } + + spin_lock_irqsave(&lp->lock, flags); + SMC_SET_MAC_CR(lp, mcr); + if (update_multicast) { + DBG(SMC_DEBUG_MISC, dev, + "update mcast hash table 0x%08x 0x%08x\n", + multicast_table[0], multicast_table[1]); + SMC_SET_HASHL(lp, multicast_table[0]); + SMC_SET_HASHH(lp, multicast_table[1]); + } + spin_unlock_irqrestore(&lp->lock, flags); +} + + +/* + * Open and Initialize the board + * + * Set up everything, reset the card, etc.. + */ +static int +smc911x_open(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + /* reset the hardware */ + smc911x_reset(dev); + + /* Configure the PHY, initialize the link state */ + smc911x_phy_configure(&lp->phy_configure); + + /* Turn on Tx + Rx */ + smc911x_enable(dev); + + netif_start_queue(dev); + + return 0; +} + +/* + * smc911x_close + * + * this makes the board clean up everything that it can + * and not talk to the outside world. Caused by + * an 'ifconfig ethX down' + */ +static int smc911x_close(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + netif_stop_queue(dev); + netif_carrier_off(dev); + + /* clear everything */ + smc911x_shutdown(dev); + + if (lp->phy_type != 0) { + /* We need to ensure that no calls to + * smc911x_phy_configure are pending. + */ + cancel_work_sync(&lp->phy_configure); + smc911x_phy_powerdown(dev, lp->mii.phy_id); + } + + if (lp->pending_tx_skb) { + dev_kfree_skb(lp->pending_tx_skb); + lp->pending_tx_skb = NULL; + } + + return 0; +} + +/* + * Ethtool support + */ +static int +smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret, status; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + cmd->maxtxpkt = 1; + cmd->maxrxpkt = 1; + + if (lp->phy_type != 0) { + spin_lock_irqsave(&lp->lock, flags); + ret = mii_ethtool_gset(&lp->mii, cmd); + spin_unlock_irqrestore(&lp->lock, flags); + } else { + cmd->supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_TP | SUPPORTED_AUI; + + if (lp->ctl_rspeed == 10) + ethtool_cmd_speed_set(cmd, SPEED_10); + else if (lp->ctl_rspeed == 100) + ethtool_cmd_speed_set(cmd, SPEED_100); + + cmd->autoneg = AUTONEG_DISABLE; + if (lp->mii.phy_id==1) + cmd->transceiver = XCVR_INTERNAL; + else + cmd->transceiver = XCVR_EXTERNAL; + cmd->port = 0; + SMC_GET_PHY_SPECIAL(lp, lp->mii.phy_id, status); + cmd->duplex = + (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ? + DUPLEX_FULL : DUPLEX_HALF; + ret = 0; + } + + return ret; +} + +static int +smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret; + unsigned long flags; + + if (lp->phy_type != 0) { + spin_lock_irqsave(&lp->lock, flags); + ret = mii_ethtool_sset(&lp->mii, cmd); + spin_unlock_irqrestore(&lp->lock, flags); + } else { + if (cmd->autoneg != AUTONEG_DISABLE || + cmd->speed != SPEED_10 || + (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) || + (cmd->port != PORT_TP && cmd->port != PORT_AUI)) + return -EINVAL; + + lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL; + + ret = 0; + } + + return ret; +} + +static void +smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, CARDNAME, sizeof(info->driver)); + strlcpy(info->version, version, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(dev->dev.parent), + sizeof(info->bus_info)); +} + +static int smc911x_ethtool_nwayreset(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret = -EINVAL; + unsigned long flags; + + if (lp->phy_type != 0) { + spin_lock_irqsave(&lp->lock, flags); + ret = mii_nway_restart(&lp->mii); + spin_unlock_irqrestore(&lp->lock, flags); + } + + return ret; +} + +static u32 smc911x_ethtool_getmsglevel(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + return lp->msg_enable; +} + +static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct smc911x_local *lp = netdev_priv(dev); + lp->msg_enable = level; +} + +static int smc911x_ethtool_getregslen(struct net_device *dev) +{ + /* System regs + MAC regs + PHY regs */ + return (((E2P_CMD - ID_REV)/4 + 1) + + (WUCSR - MAC_CR)+1 + 32) * sizeof(u32); +} + +static void smc911x_ethtool_getregs(struct net_device *dev, + struct ethtool_regs* regs, void *buf) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long flags; + u32 reg,i,j=0; + u32 *data = (u32*)buf; + + regs->version = lp->version; + for(i=ID_REV;i<=E2P_CMD;i+=4) { + data[j++] = SMC_inl(lp, i); + } + for(i=MAC_CR;i<=WUCSR;i++) { + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MAC_CSR(lp, i, reg); + spin_unlock_irqrestore(&lp->lock, flags); + data[j++] = reg; + } + for(i=0;i<=31;i++) { + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MII(lp, i, lp->mii.phy_id, reg); + spin_unlock_irqrestore(&lp->lock, flags); + data[j++] = reg & 0xFFFF; + } +} + +static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned int timeout; + int e2p_cmd; + + e2p_cmd = SMC_GET_E2P_CMD(lp); + for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) { + if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) { + PRINTK(dev, "%s timeout waiting for EEPROM to respond\n", + __func__); + return -EFAULT; + } + mdelay(1); + e2p_cmd = SMC_GET_E2P_CMD(lp); + } + if (timeout == 0) { + PRINTK(dev, "%s timeout waiting for EEPROM CMD not busy\n", + __func__); + return -ETIMEDOUT; + } + return 0; +} + +static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev, + int cmd, int addr) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret; + + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + return ret; + SMC_SET_E2P_CMD(lp, E2P_CMD_EPC_BUSY_ | + ((cmd) & (0x7<<28)) | + ((addr) & 0xFF)); + return 0; +} + +static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev, + u8 *data) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret; + + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + return ret; + *data = SMC_GET_E2P_DATA(lp); + return 0; +} + +static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev, + u8 data) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret; + + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + return ret; + SMC_SET_E2P_DATA(lp, data); + return 0; +} + +static int smc911x_ethtool_geteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + u8 eebuf[SMC911X_EEPROM_LEN]; + int i, ret; + + for(i=0;i<SMC911X_EEPROM_LEN;i++) { + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ_, i ))!=0) + return ret; + if ((ret=smc911x_ethtool_read_eeprom_byte(dev, &eebuf[i]))!=0) + return ret; + } + memcpy(data, eebuf+eeprom->offset, eeprom->len); + return 0; +} + +static int smc911x_ethtool_seteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int i, ret; + + /* Enable erase */ + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0) + return ret; + for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) { + /* erase byte */ + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0) + return ret; + /* write byte */ + if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0) + return ret; + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0) + return ret; + } + return 0; +} + +static int smc911x_ethtool_geteeprom_len(struct net_device *dev) +{ + return SMC911X_EEPROM_LEN; +} + +static const struct ethtool_ops smc911x_ethtool_ops = { + .get_settings = smc911x_ethtool_getsettings, + .set_settings = smc911x_ethtool_setsettings, + .get_drvinfo = smc911x_ethtool_getdrvinfo, + .get_msglevel = smc911x_ethtool_getmsglevel, + .set_msglevel = smc911x_ethtool_setmsglevel, + .nway_reset = smc911x_ethtool_nwayreset, + .get_link = ethtool_op_get_link, + .get_regs_len = smc911x_ethtool_getregslen, + .get_regs = smc911x_ethtool_getregs, + .get_eeprom_len = smc911x_ethtool_geteeprom_len, + .get_eeprom = smc911x_ethtool_geteeprom, + .set_eeprom = smc911x_ethtool_seteeprom, +}; + +/* + * smc911x_findirq + * + * This routine has a simple purpose -- make the SMC chip generate an + * interrupt, so an auto-detect routine can detect it, and find the IRQ, + */ +static int smc911x_findirq(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int timeout = 20; + unsigned long cookie; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + cookie = probe_irq_on(); + + /* + * Force a SW interrupt + */ + + SMC_SET_INT_EN(lp, INT_EN_SW_INT_EN_); + + /* + * Wait until positive that the interrupt has been generated + */ + do { + int int_status; + udelay(10); + int_status = SMC_GET_INT_EN(lp); + if (int_status & INT_EN_SW_INT_EN_) + break; /* got the interrupt */ + } while (--timeout); + + /* + * there is really nothing that I can do here if timeout fails, + * as autoirq_report will return a 0 anyway, which is what I + * want in this case. Plus, the clean up is needed in both + * cases. + */ + + /* and disable all interrupts again */ + SMC_SET_INT_EN(lp, 0); + + /* and return what I found */ + return probe_irq_off(cookie); +} + +static const struct net_device_ops smc911x_netdev_ops = { + .ndo_open = smc911x_open, + .ndo_stop = smc911x_close, + .ndo_start_xmit = smc911x_hard_start_xmit, + .ndo_tx_timeout = smc911x_timeout, + .ndo_set_rx_mode = smc911x_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = smc911x_poll_controller, +#endif +}; + +/* + * Function: smc911x_probe(unsigned long ioaddr) + * + * Purpose: + * Tests to see if a given ioaddr points to an SMC911x chip. + * Returns a 0 on success + * + * Algorithm: + * (1) see if the endian word is OK + * (1) see if I recognize the chip ID in the appropriate register + * + * Here I do typical initialization tasks. + * + * o Initialize the structure if needed + * o print out my vanity message if not done so already + * o print out what type of hardware is detected + * o print out the ethernet address + * o find the IRQ + * o set up my private data + * o configure the dev structure with my subroutines + * o actually GRAB the irq. + * o GRAB the region + */ +static int smc911x_probe(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int i, retval; + unsigned int val, chip_id, revision; + const char *version_string; + unsigned long irq_flags; + + DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); + + /* First, see if the endian word is recognized */ + val = SMC_GET_BYTE_TEST(lp); + DBG(SMC_DEBUG_MISC, dev, "%s: endian probe returned 0x%04x\n", + CARDNAME, val); + if (val != 0x87654321) { + netdev_err(dev, "Invalid chip endian 0x%08x\n", val); + retval = -ENODEV; + goto err_out; + } + + /* + * check if the revision register is something that I + * recognize. These might need to be added to later, + * as future revisions could be added. + */ + chip_id = SMC_GET_PN(lp); + DBG(SMC_DEBUG_MISC, dev, "%s: id probe returned 0x%04x\n", + CARDNAME, chip_id); + for(i=0;chip_ids[i].id != 0; i++) { + if (chip_ids[i].id == chip_id) break; + } + if (!chip_ids[i].id) { + netdev_err(dev, "Unknown chip ID %04x\n", chip_id); + retval = -ENODEV; + goto err_out; + } + version_string = chip_ids[i].name; + + revision = SMC_GET_REV(lp); + DBG(SMC_DEBUG_MISC, dev, "%s: revision = 0x%04x\n", CARDNAME, revision); + + /* At this point I'll assume that the chip is an SMC911x. */ + DBG(SMC_DEBUG_MISC, dev, "%s: Found a %s\n", + CARDNAME, chip_ids[i].name); + + /* Validate the TX FIFO size requested */ + if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) { + netdev_err(dev, "Invalid TX FIFO size requested %d\n", + tx_fifo_kb); + retval = -EINVAL; + goto err_out; + } + + /* fill in some of the fields */ + lp->version = chip_ids[i].id; + lp->revision = revision; + lp->tx_fifo_kb = tx_fifo_kb; + /* Reverse calculate the RX FIFO size from the TX */ + lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512; + lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15; + + /* Set the automatic flow control values */ + switch(lp->tx_fifo_kb) { + /* + * AFC_HI is about ((Rx Data Fifo Size)*2/3)/64 + * AFC_LO is AFC_HI/2 + * BACK_DUR is about 5uS*(AFC_LO) rounded down + */ + case 2:/* 13440 Rx Data Fifo Size */ + lp->afc_cfg=0x008C46AF;break; + case 3:/* 12480 Rx Data Fifo Size */ + lp->afc_cfg=0x0082419F;break; + case 4:/* 11520 Rx Data Fifo Size */ + lp->afc_cfg=0x00783C9F;break; + case 5:/* 10560 Rx Data Fifo Size */ + lp->afc_cfg=0x006E374F;break; + case 6:/* 9600 Rx Data Fifo Size */ + lp->afc_cfg=0x0064328F;break; + case 7:/* 8640 Rx Data Fifo Size */ + lp->afc_cfg=0x005A2D7F;break; + case 8:/* 7680 Rx Data Fifo Size */ + lp->afc_cfg=0x0050287F;break; + case 9:/* 6720 Rx Data Fifo Size */ + lp->afc_cfg=0x0046236F;break; + case 10:/* 5760 Rx Data Fifo Size */ + lp->afc_cfg=0x003C1E6F;break; + case 11:/* 4800 Rx Data Fifo Size */ + lp->afc_cfg=0x0032195F;break; + /* + * AFC_HI is ~1520 bytes less than RX Data Fifo Size + * AFC_LO is AFC_HI/2 + * BACK_DUR is about 5uS*(AFC_LO) rounded down + */ + case 12:/* 3840 Rx Data Fifo Size */ + lp->afc_cfg=0x0024124F;break; + case 13:/* 2880 Rx Data Fifo Size */ + lp->afc_cfg=0x0015073F;break; + case 14:/* 1920 Rx Data Fifo Size */ + lp->afc_cfg=0x0006032F;break; + default: + PRINTK(dev, "ERROR -- no AFC_CFG setting found"); + break; + } + + DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, dev, + "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME, + lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg); + + spin_lock_init(&lp->lock); + + /* Get the MAC address */ + SMC_GET_MAC_ADDR(lp, dev->dev_addr); + + /* now, reset the chip, and put it into a known state */ + smc911x_reset(dev); + + /* + * If dev->irq is 0, then the device has to be banged on to see + * what the IRQ is. + * + * Specifying an IRQ is done with the assumption that the user knows + * what (s)he is doing. No checking is done!!!! + */ + if (dev->irq < 1) { + int trials; + + trials = 3; + while (trials--) { + dev->irq = smc911x_findirq(dev); + if (dev->irq) + break; + /* kick the card and try again */ + smc911x_reset(dev); + } + } + if (dev->irq == 0) { + netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n"); + retval = -ENODEV; + goto err_out; + } + dev->irq = irq_canonicalize(dev->irq); + + dev->netdev_ops = &smc911x_netdev_ops; + dev->watchdog_timeo = msecs_to_jiffies(watchdog); + dev->ethtool_ops = &smc911x_ethtool_ops; + + INIT_WORK(&lp->phy_configure, smc911x_phy_configure); + lp->mii.phy_id_mask = 0x1f; + lp->mii.reg_num_mask = 0x1f; + lp->mii.force_media = 0; + lp->mii.full_duplex = 0; + lp->mii.dev = dev; + lp->mii.mdio_read = smc911x_phy_read; + lp->mii.mdio_write = smc911x_phy_write; + + /* + * Locate the phy, if any. + */ + smc911x_phy_detect(dev); + + /* Set default parameters */ + lp->msg_enable = NETIF_MSG_LINK; + lp->ctl_rfduplx = 1; + lp->ctl_rspeed = 100; + +#ifdef SMC_DYNAMIC_BUS_CONFIG + irq_flags = lp->cfg.irq_flags; +#else + irq_flags = IRQF_SHARED | SMC_IRQ_SENSE; +#endif + + /* Grab the IRQ */ + retval = request_irq(dev->irq, smc911x_interrupt, + irq_flags, dev->name, dev); + if (retval) + goto err_out; + +#ifdef SMC_USE_DMA + lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq); + lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq); + lp->rxdma_active = 0; + lp->txdma_active = 0; + dev->dma = lp->rxdma; +#endif + + retval = register_netdev(dev); + if (retval == 0) { + /* now, print out the card info, in a short format.. */ + netdev_info(dev, "%s (rev %d) at %#lx IRQ %d", + version_string, lp->revision, + dev->base_addr, dev->irq); + +#ifdef SMC_USE_DMA + if (lp->rxdma != -1) + pr_cont(" RXDMA %d", lp->rxdma); + + if (lp->txdma != -1) + pr_cont(" TXDMA %d", lp->txdma); +#endif + pr_cont("\n"); + if (!is_valid_ether_addr(dev->dev_addr)) { + netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n"); + } else { + /* Print the Ethernet address */ + netdev_info(dev, "Ethernet addr: %pM\n", + dev->dev_addr); + } + + if (lp->phy_type == 0) { + PRINTK(dev, "No PHY found\n"); + } else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) { + PRINTK(dev, "LAN911x Internal PHY\n"); + } else { + PRINTK(dev, "External PHY 0x%08x\n", lp->phy_type); + } + } + +err_out: +#ifdef SMC_USE_DMA + if (retval) { + if (lp->rxdma != -1) { + SMC_DMA_FREE(dev, lp->rxdma); + } + if (lp->txdma != -1) { + SMC_DMA_FREE(dev, lp->txdma); + } + } +#endif + return retval; +} + +/* + * smc911x_drv_probe(void) + * + * Output: + * 0 --> there is a device + * anything else, error + */ +static int smc911x_drv_probe(struct platform_device *pdev) +{ + struct net_device *ndev; + struct resource *res; + struct smc911x_local *lp; + void __iomem *addr; + int ret; + + /* ndev is not valid yet, so avoid passing it in. */ + DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out; + } + + /* + * Request the regions. + */ + if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) { + ret = -EBUSY; + goto out; + } + + ndev = alloc_etherdev(sizeof(struct smc911x_local)); + if (!ndev) { + ret = -ENOMEM; + goto release_1; + } + SET_NETDEV_DEV(ndev, &pdev->dev); + + ndev->dma = (unsigned char)-1; + ndev->irq = platform_get_irq(pdev, 0); + lp = netdev_priv(ndev); + lp->netdev = ndev; +#ifdef SMC_DYNAMIC_BUS_CONFIG + { + struct smc911x_platdata *pd = dev_get_platdata(&pdev->dev); + if (!pd) { + ret = -EINVAL; + goto release_both; + } + memcpy(&lp->cfg, pd, sizeof(lp->cfg)); + } +#endif + + addr = ioremap(res->start, SMC911X_IO_EXTENT); + if (!addr) { + ret = -ENOMEM; + goto release_both; + } + + platform_set_drvdata(pdev, ndev); + lp->base = addr; + ndev->base_addr = res->start; + ret = smc911x_probe(ndev); + if (ret != 0) { + iounmap(addr); +release_both: + free_netdev(ndev); +release_1: + release_mem_region(res->start, SMC911X_IO_EXTENT); +out: + pr_info("%s: not found (%d).\n", CARDNAME, ret); + } +#ifdef SMC_USE_DMA + else { + lp->physaddr = res->start; + lp->dev = &pdev->dev; + } +#endif + + return ret; +} + +static int smc911x_drv_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smc911x_local *lp = netdev_priv(ndev); + struct resource *res; + + DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__); + + unregister_netdev(ndev); + + free_irq(ndev->irq, ndev); + +#ifdef SMC_USE_DMA + { + if (lp->rxdma != -1) { + SMC_DMA_FREE(dev, lp->rxdma); + } + if (lp->txdma != -1) { + SMC_DMA_FREE(dev, lp->txdma); + } + } +#endif + iounmap(lp->base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, SMC911X_IO_EXTENT); + + free_netdev(ndev); + return 0; +} + +static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state) +{ + struct net_device *ndev = platform_get_drvdata(dev); + struct smc911x_local *lp = netdev_priv(ndev); + + DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__); + if (ndev) { + if (netif_running(ndev)) { + netif_device_detach(ndev); + smc911x_shutdown(ndev); +#if POWER_DOWN + /* Set D2 - Energy detect only setting */ + SMC_SET_PMT_CTRL(lp, 2<<12); +#endif + } + } + return 0; +} + +static int smc911x_drv_resume(struct platform_device *dev) +{ + struct net_device *ndev = platform_get_drvdata(dev); + + DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__); + if (ndev) { + struct smc911x_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) { + smc911x_reset(ndev); + if (lp->phy_type != 0) + smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); + netif_device_attach(ndev); + } + } + return 0; +} + +static struct platform_driver smc911x_driver = { + .probe = smc911x_drv_probe, + .remove = smc911x_drv_remove, + .suspend = smc911x_drv_suspend, + .resume = smc911x_drv_resume, + .driver = { + .name = CARDNAME, + }, +}; + +module_platform_driver(smc911x_driver); |