diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 133 |
1 files changed, 105 insertions, 28 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 4514ba73d..cf37ea558 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -96,6 +96,105 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) } /** + * stmmac_axi_setup - parse DT parameters for programming the AXI register + * @pdev: platform device + * @priv: driver private struct. + * Description: + * if required, from device-tree the AXI internal register can be tuned + * by using platform parameters. + */ +static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) +{ + struct device_node *np; + struct stmmac_axi *axi; + + np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0); + if (!np) + return NULL; + + axi = kzalloc(sizeof(*axi), GFP_KERNEL); + if (!axi) + return ERR_PTR(-ENOMEM); + + axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en"); + axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm"); + axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe"); + axi->axi_axi_all = of_property_read_bool(np, "snps,axi_all"); + axi->axi_fb = of_property_read_bool(np, "snps,axi_fb"); + axi->axi_mb = of_property_read_bool(np, "snps,axi_mb"); + axi->axi_rb = of_property_read_bool(np, "snps,axi_rb"); + + of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt); + of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt); + of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN); + + return axi; +} + +/** + * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources + * @plat: driver data platform structure + * @np: device tree node + * @dev: device pointer + * Description: + * The mdio bus will be allocated in case of a phy transceiver is on board; + * it will be NULL if the fixed-link is configured. + * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated + * in any case (for DSA, mdio must be registered even if fixed-link). + * The table below sums the supported configurations: + * ------------------------------- + * snps,phy-addr | Y + * ------------------------------- + * phy-handle | Y + * ------------------------------- + * fixed-link | N + * ------------------------------- + * snps,dwmac-mdio | + * even if | Y + * fixed-link | + * ------------------------------- + * + * It returns 0 in case of success otherwise -ENODEV. + */ +static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, + struct device_node *np, struct device *dev) +{ + bool mdio = true; + + /* If phy-handle property is passed from DT, use it as the PHY */ + plat->phy_node = of_parse_phandle(np, "phy-handle", 0); + if (plat->phy_node) + dev_dbg(dev, "Found phy-handle subnode\n"); + + /* If phy-handle is not specified, check if we have a fixed-phy */ + if (!plat->phy_node && of_phy_is_fixed_link(np)) { + if ((of_phy_register_fixed_link(np) < 0)) + return -ENODEV; + + dev_dbg(dev, "Found fixed-link subnode\n"); + plat->phy_node = of_node_get(np); + mdio = false; + } + + /* If snps,dwmac-mdio is passed from DT, always register the MDIO */ + for_each_child_of_node(np, plat->mdio_node) { + if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio")) + break; + } + + if (plat->mdio_node) { + dev_dbg(dev, "Found MDIO subnode\n"); + mdio = true; + } + + if (mdio) + plat->mdio_bus_data = + devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data), + GFP_KERNEL); + return 0; +} + +/** * stmmac_probe_config_dt - parse device-tree driver parameters * @pdev: platform_device structure * @plat: driver data platform structure @@ -110,7 +209,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) struct device_node *np = pdev->dev.of_node; struct plat_stmmacenet_data *plat; struct stmmac_dma_cfg *dma_cfg; - struct device_node *child_node = NULL; plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); if (!plat) @@ -130,36 +228,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) /* Default to phy auto-detection */ plat->phy_addr = -1; - /* If we find a phy-handle property, use it as the PHY */ - plat->phy_node = of_parse_phandle(np, "phy-handle", 0); - - /* If phy-handle is not specified, check if we have a fixed-phy */ - if (!plat->phy_node && of_phy_is_fixed_link(np)) { - if ((of_phy_register_fixed_link(np) < 0)) - return ERR_PTR(-ENODEV); - - plat->phy_node = of_node_get(np); - } - - for_each_child_of_node(np, child_node) - if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) { - plat->mdio_node = child_node; - break; - } - /* "snps,phy-addr" is not a standard property. Mark it as deprecated * and warn of its use. Remove this when phy node support is added. */ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); - if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node) - plat->mdio_bus_data = NULL; - else - plat->mdio_bus_data = - devm_kzalloc(&pdev->dev, - sizeof(struct stmmac_mdio_bus_data), - GFP_KERNEL); + /* To Configure PHY by using all device-tree supported properties */ + if (stmmac_dt_phy(plat, np, &pdev->dev)) + return ERR_PTR(-ENODEV); of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size); @@ -223,13 +300,11 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) } plat->dma_cfg = dma_cfg; of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); + dma_cfg->aal = of_property_read_bool(np, "snps,aal"); dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst"); - of_property_read_u32(np, "snps,burst_len", &dma_cfg->burst_len); - if (dma_cfg->burst_len < 0 || dma_cfg->burst_len > 256) - dma_cfg->burst_len = 0; } plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode"); if (plat->force_thresh_dma_mode) { @@ -237,6 +312,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set."); } + plat->axi = stmmac_axi_setup(pdev); + return plat; } #else |