summaryrefslogtreecommitdiff
path: root/drivers/net/fddi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/fddi')
-rw-r--r--drivers/net/fddi/Kconfig77
-rw-r--r--drivers/net/fddi/Makefile6
-rw-r--r--drivers/net/fddi/defxx.c3853
-rw-r--r--drivers/net/fddi/defxx.h1803
-rw-r--r--drivers/net/fddi/skfp/Makefile20
-rw-r--r--drivers/net/fddi/skfp/cfm.c627
-rw-r--r--drivers/net/fddi/skfp/drvfbi.c584
-rw-r--r--drivers/net/fddi/skfp/ecm.c536
-rw-r--r--drivers/net/fddi/skfp/ess.c720
-rw-r--r--drivers/net/fddi/skfp/fplustm.c1492
-rw-r--r--drivers/net/fddi/skfp/h/cmtdef.h756
-rw-r--r--drivers/net/fddi/skfp/h/fddi.h69
-rw-r--r--drivers/net/fddi/skfp/h/fddimib.h349
-rw-r--r--drivers/net/fddi/skfp/h/fplustm.h274
-rw-r--r--drivers/net/fddi/skfp/h/hwmtm.h399
-rw-r--r--drivers/net/fddi/skfp/h/mbuf.h50
-rw-r--r--drivers/net/fddi/skfp/h/osdef1st.h125
-rw-r--r--drivers/net/fddi/skfp/h/sba.h142
-rw-r--r--drivers/net/fddi/skfp/h/sba_def.h76
-rw-r--r--drivers/net/fddi/skfp/h/skfbi.h1128
-rw-r--r--drivers/net/fddi/skfp/h/skfbiinc.h97
-rw-r--r--drivers/net/fddi/skfp/h/smc.h488
-rw-r--r--drivers/net/fddi/skfp/h/smt.h882
-rw-r--r--drivers/net/fddi/skfp/h/smt_p.h326
-rw-r--r--drivers/net/fddi/skfp/h/smtstate.h106
-rw-r--r--drivers/net/fddi/skfp/h/supern_2.h1059
-rw-r--r--drivers/net/fddi/skfp/h/targethw.h138
-rw-r--r--drivers/net/fddi/skfp/h/targetos.h164
-rw-r--r--drivers/net/fddi/skfp/h/types.h39
-rw-r--r--drivers/net/fddi/skfp/hwmtm.c2178
-rw-r--r--drivers/net/fddi/skfp/hwt.c269
-rw-r--r--drivers/net/fddi/skfp/pcmplc.c2014
-rw-r--r--drivers/net/fddi/skfp/pmf.c1663
-rw-r--r--drivers/net/fddi/skfp/queue.c173
-rw-r--r--drivers/net/fddi/skfp/rmt.c654
-rw-r--r--drivers/net/fddi/skfp/skfddi.c2248
-rw-r--r--drivers/net/fddi/skfp/smt.c2034
-rw-r--r--drivers/net/fddi/skfp/smtdef.c355
-rw-r--r--drivers/net/fddi/skfp/smtinit.c125
-rw-r--r--drivers/net/fddi/skfp/smttimer.c156
-rw-r--r--drivers/net/fddi/skfp/srf.c429
41 files changed, 28683 insertions, 0 deletions
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
new file mode 100644
index 000000000..3a424c864
--- /dev/null
+++ b/drivers/net/fddi/Kconfig
@@ -0,0 +1,77 @@
+#
+# FDDI network device configuration
+#
+
+config FDDI
+ tristate "FDDI driver support"
+ depends on PCI || EISA || TC
+ ---help---
+ Fiber Distributed Data Interface is a high speed local area network
+ design; essentially a replacement for high speed Ethernet. FDDI can
+ run over copper or fiber. If you are connected to such a network and
+ want a driver for the FDDI card in your computer, say Y here (and
+ then also Y to the driver for your FDDI card, below). Most people
+ will say N.
+
+if FDDI
+
+config DEFXX
+ tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+ depends on FDDI && (PCI || EISA || TC)
+ ---help---
+ This is support for the DIGITAL series of TURBOchannel (DEFTA),
+ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+ to a local FDDI network.
+
+ To compile this driver as a module, choose M here: the module
+ will be called defxx. If unsure, say N.
+
+config DEFXX_MMIO
+ bool
+ prompt "Use MMIO instead of PIO" if PCI || EISA
+ depends on DEFXX
+ default n if PCI || EISA
+ default y
+ ---help---
+ This instructs the driver to use EISA or PCI memory-mapped I/O
+ (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ Enabling this gives an improvement in processing time in parts
+ of the driver, but it may cause problems with EISA (DEFEA)
+ adapters. TURBOchannel does not have the concept of I/O ports,
+ so MMIO is always used for these (DEFTA) adapters.
+
+ If unsure, say N.
+
+config SKFP
+ tristate "SysKonnect FDDI PCI support"
+ depends on FDDI && PCI
+ select BITREVERSE
+ ---help---
+ Say Y here if you have a SysKonnect FDDI PCI adapter.
+ The following adapters are supported by this driver:
+ - SK-5521 (SK-NET FDDI-UP)
+ - SK-5522 (SK-NET FDDI-UP DAS)
+ - SK-5541 (SK-NET FDDI-FP)
+ - SK-5543 (SK-NET FDDI-LP)
+ - SK-5544 (SK-NET FDDI-LP DAS)
+ - SK-5821 (SK-NET FDDI-UP64)
+ - SK-5822 (SK-NET FDDI-UP64 DAS)
+ - SK-5841 (SK-NET FDDI-FP64)
+ - SK-5843 (SK-NET FDDI-LP64)
+ - SK-5844 (SK-NET FDDI-LP64 DAS)
+ - Netelligent 100 FDDI DAS Fibre SC
+ - Netelligent 100 FDDI SAS Fibre SC
+ - Netelligent 100 FDDI DAS UTP
+ - Netelligent 100 FDDI SAS UTP
+ - Netelligent 100 FDDI SAS Fibre MIC
+
+ Read <file:Documentation/networking/skfp.txt> for information about
+ the driver.
+
+ Questions concerning this driver can be addressed to:
+ <linux@syskonnect.de>
+
+ To compile this driver as a module, choose M here: the module
+ will be called skfp. This is recommended.
+
+endif # FDDI
diff --git a/drivers/net/fddi/Makefile b/drivers/net/fddi/Makefile
new file mode 100644
index 000000000..36da19c9a
--- /dev/null
+++ b/drivers/net/fddi/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux FDDI network device drivers.
+#
+
+obj-$(CONFIG_DEFXX) += defxx.o
+obj-$(CONFIG_SKFP) += skfp/
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
new file mode 100644
index 000000000..7f975a2c8
--- /dev/null
+++ b/drivers/net/fddi/defxx.c
@@ -0,0 +1,3853 @@
+/*
+ * File Name:
+ * defxx.c
+ *
+ * Copyright Information:
+ * Copyright Digital Equipment Corporation 1996.
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Abstract:
+ * A Linux device driver supporting the Digital Equipment Corporation
+ * FDDI TURBOchannel, EISA and PCI controller families. Supported
+ * adapters include:
+ *
+ * DEC FDDIcontroller/TURBOchannel (DEFTA)
+ * DEC FDDIcontroller/EISA (DEFEA)
+ * DEC FDDIcontroller/PCI (DEFPA)
+ *
+ * The original author:
+ * LVS Lawrence V. Stefani <lstefani@yahoo.com>
+ *
+ * Maintainers:
+ * macro Maciej W. Rozycki <macro@linux-mips.org>
+ *
+ * Credits:
+ * I'd like to thank Patricia Cross for helping me get started with
+ * Linux, David Davies for a lot of help upgrading and configuring
+ * my development system and for answering many OS and driver
+ * development questions, and Alan Cox for recommendations and
+ * integration help on getting FDDI support into Linux. LVS
+ *
+ * Driver Architecture:
+ * The driver architecture is largely based on previous driver work
+ * for other operating systems. The upper edge interface and
+ * functions were largely taken from existing Linux device drivers
+ * such as David Davies' DE4X5.C driver and Donald Becker's TULIP.C
+ * driver.
+ *
+ * Adapter Probe -
+ * The driver scans for supported EISA adapters by reading the
+ * SLOT ID register for each EISA slot and making a match
+ * against the expected value.
+ *
+ * Bus-Specific Initialization -
+ * This driver currently supports both EISA and PCI controller
+ * families. While the custom DMA chip and FDDI logic is similar
+ * or identical, the bus logic is very different. After
+ * initialization, the only bus-specific differences is in how the
+ * driver enables and disables interrupts. Other than that, the
+ * run-time critical code behaves the same on both families.
+ * It's important to note that both adapter families are configured
+ * to I/O map, rather than memory map, the adapter registers.
+ *
+ * Driver Open/Close -
+ * In the driver open routine, the driver ISR (interrupt service
+ * routine) is registered and the adapter is brought to an
+ * operational state. In the driver close routine, the opposite
+ * occurs; the driver ISR is deregistered and the adapter is
+ * brought to a safe, but closed state. Users may use consecutive
+ * commands to bring the adapter up and down as in the following
+ * example:
+ * ifconfig fddi0 up
+ * ifconfig fddi0 down
+ * ifconfig fddi0 up
+ *
+ * Driver Shutdown -
+ * Apparently, there is no shutdown or halt routine support under
+ * Linux. This routine would be called during "reboot" or
+ * "shutdown" to allow the driver to place the adapter in a safe
+ * state before a warm reboot occurs. To be really safe, the user
+ * should close the adapter before shutdown (eg. ifconfig fddi0 down)
+ * to ensure that the adapter DMA engine is taken off-line. However,
+ * the current driver code anticipates this problem and always issues
+ * a soft reset of the adapter at the beginning of driver initialization.
+ * A future driver enhancement in this area may occur in 2.1.X where
+ * Alan indicated that a shutdown handler may be implemented.
+ *
+ * Interrupt Service Routine -
+ * The driver supports shared interrupts, so the ISR is registered for
+ * each board with the appropriate flag and the pointer to that board's
+ * device structure. This provides the context during interrupt
+ * processing to support shared interrupts and multiple boards.
+ *
+ * Interrupt enabling/disabling can occur at many levels. At the host
+ * end, you can disable system interrupts, or disable interrupts at the
+ * PIC (on Intel systems). Across the bus, both EISA and PCI adapters
+ * have a bus-logic chip interrupt enable/disable as well as a DMA
+ * controller interrupt enable/disable.
+ *
+ * The driver currently enables and disables adapter interrupts at the
+ * bus-logic chip and assumes that Linux will take care of clearing or
+ * acknowledging any host-based interrupt chips.
+ *
+ * Control Functions -
+ * Control functions are those used to support functions such as adding
+ * or deleting multicast addresses, enabling or disabling packet
+ * reception filters, or other custom/proprietary commands. Presently,
+ * the driver supports the "get statistics", "set multicast list", and
+ * "set mac address" functions defined by Linux. A list of possible
+ * enhancements include:
+ *
+ * - Custom ioctl interface for executing port interface commands
+ * - Custom ioctl interface for adding unicast addresses to
+ * adapter CAM (to support bridge functions).
+ * - Custom ioctl interface for supporting firmware upgrades.
+ *
+ * Hardware (port interface) Support Routines -
+ * The driver function names that start with "dfx_hw_" represent
+ * low-level port interface routines that are called frequently. They
+ * include issuing a DMA or port control command to the adapter,
+ * resetting the adapter, or reading the adapter state. Since the
+ * driver initialization and run-time code must make calls into the
+ * port interface, these routines were written to be as generic and
+ * usable as possible.
+ *
+ * Receive Path -
+ * The adapter DMA engine supports a 256 entry receive descriptor block
+ * of which up to 255 entries can be used at any given time. The
+ * architecture is a standard producer, consumer, completion model in
+ * which the driver "produces" receive buffers to the adapter, the
+ * adapter "consumes" the receive buffers by DMAing incoming packet data,
+ * and the driver "completes" the receive buffers by servicing the
+ * incoming packet, then "produces" a new buffer and starts the cycle
+ * again. Receive buffers can be fragmented in up to 16 fragments
+ * (descriptor entries). For simplicity, this driver posts
+ * single-fragment receive buffers of 4608 bytes, then allocates a
+ * sk_buff, copies the data, then reposts the buffer. To reduce CPU
+ * utilization, a better approach would be to pass up the receive
+ * buffer (no extra copy) then allocate and post a replacement buffer.
+ * This is a performance enhancement that should be looked into at
+ * some point.
+ *
+ * Transmit Path -
+ * Like the receive path, the adapter DMA engine supports a 256 entry
+ * transmit descriptor block of which up to 255 entries can be used at
+ * any given time. Transmit buffers can be fragmented in up to 255
+ * fragments (descriptor entries). This driver always posts one
+ * fragment per transmit packet request.
+ *
+ * The fragment contains the entire packet from FC to end of data.
+ * Before posting the buffer to the adapter, the driver sets a three-byte
+ * packet request header (PRH) which is required by the Motorola MAC chip
+ * used on the adapters. The PRH tells the MAC the type of token to
+ * receive/send, whether or not to generate and append the CRC, whether
+ * synchronous or asynchronous framing is used, etc. Since the PRH
+ * definition is not necessarily consistent across all FDDI chipsets,
+ * the driver, rather than the common FDDI packet handler routines,
+ * sets these bytes.
+ *
+ * To reduce the amount of descriptor fetches needed per transmit request,
+ * the driver takes advantage of the fact that there are at least three
+ * bytes available before the skb->data field on the outgoing transmit
+ * request. This is guaranteed by having fddi_setup() in net_init.c set
+ * dev->hard_header_len to 24 bytes. 21 bytes accounts for the largest
+ * header in an 802.2 SNAP frame. The other 3 bytes are the extra "pad"
+ * bytes which we'll use to store the PRH.
+ *
+ * There's a subtle advantage to adding these pad bytes to the
+ * hard_header_len, it ensures that the data portion of the packet for
+ * an 802.2 SNAP frame is longword aligned. Other FDDI driver
+ * implementations may not need the extra padding and can start copying
+ * or DMAing directly from the FC byte which starts at skb->data. Should
+ * another driver implementation need ADDITIONAL padding, the net_init.c
+ * module should be updated and dev->hard_header_len should be increased.
+ * NOTE: To maintain the alignment on the data portion of the packet,
+ * dev->hard_header_len should always be evenly divisible by 4 and at
+ * least 24 bytes in size.
+ *
+ * Modification History:
+ * Date Name Description
+ * 16-Aug-96 LVS Created.
+ * 20-Aug-96 LVS Updated dfx_probe so that version information
+ * string is only displayed if 1 or more cards are
+ * found. Changed dfx_rcv_queue_process to copy
+ * 3 NULL bytes before FC to ensure that data is
+ * longword aligned in receive buffer.
+ * 09-Sep-96 LVS Updated dfx_ctl_set_multicast_list to enable
+ * LLC group promiscuous mode if multicast list
+ * is too large. LLC individual/group promiscuous
+ * mode is now disabled if IFF_PROMISC flag not set.
+ * dfx_xmt_queue_pkt no longer checks for NULL skb
+ * on Alan Cox recommendation. Added node address
+ * override support.
+ * 12-Sep-96 LVS Reset current address to factory address during
+ * device open. Updated transmit path to post a
+ * single fragment which includes PRH->end of data.
+ * Mar 2000 AC Did various cleanups for 2.3.x
+ * Jun 2000 jgarzik PCI and resource alloc cleanups
+ * Jul 2000 tjeerd Much cleanup and some bug fixes
+ * Sep 2000 tjeerd Fix leak on unload, cosmetic code cleanup
+ * Feb 2001 Skb allocation fixes
+ * Feb 2001 davej PCI enable cleanups.
+ * 04 Aug 2003 macro Converted to the DMA API.
+ * 14 Aug 2004 macro Fix device names reported.
+ * 14 Jun 2005 macro Use irqreturn_t.
+ * 23 Oct 2006 macro Big-endian host support.
+ * 14 Dec 2006 macro TURBOchannel support.
+ * 01 Jul 2014 macro Fixes for DMA on 64-bit hosts.
+ */
+
+/* Include files */
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/eisa.h>
+#include <linux/errno.h>
+#include <linux/fddidevice.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/tc.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#include "defxx.h"
+
+/* Version information string should be updated prior to each new release! */
+#define DRV_NAME "defxx"
+#define DRV_VERSION "v1.11"
+#define DRV_RELDATE "2014/07/01"
+
+static char version[] =
+ DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
+ " Lawrence V. Stefani and others\n";
+
+#define DYNAMIC_BUFFERS 1
+
+#define SKBUFF_RX_COPYBREAK 200
+/*
+ * NEW_SKB_SIZE = PI_RCV_DATA_K_SIZE_MAX+128 to allow 128 byte
+ * alignment for compatibility with old EISA boards.
+ */
+#define NEW_SKB_SIZE (PI_RCV_DATA_K_SIZE_MAX+128)
+
+#ifdef CONFIG_EISA
+#define DFX_BUS_EISA(dev) (dev->bus == &eisa_bus_type)
+#else
+#define DFX_BUS_EISA(dev) 0
+#endif
+
+#ifdef CONFIG_TC
+#define DFX_BUS_TC(dev) (dev->bus == &tc_bus_type)
+#else
+#define DFX_BUS_TC(dev) 0
+#endif
+
+#ifdef CONFIG_DEFXX_MMIO
+#define DFX_MMIO 1
+#else
+#define DFX_MMIO 0
+#endif
+
+/* Define module-wide (static) routines */
+
+static void dfx_bus_init(struct net_device *dev);
+static void dfx_bus_uninit(struct net_device *dev);
+static void dfx_bus_config_check(DFX_board_t *bp);
+
+static int dfx_driver_init(struct net_device *dev,
+ const char *print_name,
+ resource_size_t bar_start);
+static int dfx_adap_init(DFX_board_t *bp, int get_buffers);
+
+static int dfx_open(struct net_device *dev);
+static int dfx_close(struct net_device *dev);
+
+static void dfx_int_pr_halt_id(DFX_board_t *bp);
+static void dfx_int_type_0_process(DFX_board_t *bp);
+static void dfx_int_common(struct net_device *dev);
+static irqreturn_t dfx_interrupt(int irq, void *dev_id);
+
+static struct net_device_stats *dfx_ctl_get_stats(struct net_device *dev);
+static void dfx_ctl_set_multicast_list(struct net_device *dev);
+static int dfx_ctl_set_mac_address(struct net_device *dev, void *addr);
+static int dfx_ctl_update_cam(DFX_board_t *bp);
+static int dfx_ctl_update_filters(DFX_board_t *bp);
+
+static int dfx_hw_dma_cmd_req(DFX_board_t *bp);
+static int dfx_hw_port_ctrl_req(DFX_board_t *bp, PI_UINT32 command, PI_UINT32 data_a, PI_UINT32 data_b, PI_UINT32 *host_data);
+static void dfx_hw_adap_reset(DFX_board_t *bp, PI_UINT32 type);
+static int dfx_hw_adap_state_rd(DFX_board_t *bp);
+static int dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type);
+
+static int dfx_rcv_init(DFX_board_t *bp, int get_buffers);
+static void dfx_rcv_queue_process(DFX_board_t *bp);
+#ifdef DYNAMIC_BUFFERS
+static void dfx_rcv_flush(DFX_board_t *bp);
+#else
+static inline void dfx_rcv_flush(DFX_board_t *bp) {}
+#endif
+
+static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
+ struct net_device *dev);
+static int dfx_xmt_done(DFX_board_t *bp);
+static void dfx_xmt_flush(DFX_board_t *bp);
+
+/* Define module-wide (static) variables */
+
+static struct pci_driver dfx_pci_driver;
+static struct eisa_driver dfx_eisa_driver;
+static struct tc_driver dfx_tc_driver;
+
+
+/*
+ * =======================
+ * = dfx_port_write_long =
+ * = dfx_port_read_long =
+ * =======================
+ *
+ * Overview:
+ * Routines for reading and writing values from/to adapter
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ * offset - register offset from base I/O address
+ * data - for dfx_port_write_long, this is a value to write;
+ * for dfx_port_read_long, this is a pointer to store
+ * the read value
+ *
+ * Functional Description:
+ * These routines perform the correct operation to read or write
+ * the adapter register.
+ *
+ * EISA port block base addresses are based on the slot number in which the
+ * controller is installed. For example, if the EISA controller is installed
+ * in slot 4, the port block base address is 0x4000. If the controller is
+ * installed in slot 2, the port block base address is 0x2000, and so on.
+ * This port block can be used to access PDQ, ESIC, and DEFEA on-board
+ * registers using the register offsets defined in DEFXX.H.
+ *
+ * PCI port block base addresses are assigned by the PCI BIOS or system
+ * firmware. There is one 128 byte port block which can be accessed. It
+ * allows for I/O mapping of both PDQ and PFI registers using the register
+ * offsets defined in DEFXX.H.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * bp->base is a valid base I/O address for this adapter.
+ * offset is a valid register offset for this adapter.
+ *
+ * Side Effects:
+ * Rather than produce macros for these functions, these routines
+ * are defined using "inline" to ensure that the compiler will
+ * generate inline code and not waste a procedure call and return.
+ * This provides all the benefits of macros, but with the
+ * advantage of strict data type checking.
+ */
+
+static inline void dfx_writel(DFX_board_t *bp, int offset, u32 data)
+{
+ writel(data, bp->base.mem + offset);
+ mb();
+}
+
+static inline void dfx_outl(DFX_board_t *bp, int offset, u32 data)
+{
+ outl(data, bp->base.port + offset);
+}
+
+static void dfx_port_write_long(DFX_board_t *bp, int offset, u32 data)
+{
+ struct device __maybe_unused *bdev = bp->bus_dev;
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+
+ if (dfx_use_mmio)
+ dfx_writel(bp, offset, data);
+ else
+ dfx_outl(bp, offset, data);
+}
+
+
+static inline void dfx_readl(DFX_board_t *bp, int offset, u32 *data)
+{
+ mb();
+ *data = readl(bp->base.mem + offset);
+}
+
+static inline void dfx_inl(DFX_board_t *bp, int offset, u32 *data)
+{
+ *data = inl(bp->base.port + offset);
+}
+
+static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
+{
+ struct device __maybe_unused *bdev = bp->bus_dev;
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+
+ if (dfx_use_mmio)
+ dfx_readl(bp, offset, data);
+ else
+ dfx_inl(bp, offset, data);
+}
+
+
+/*
+ * ================
+ * = dfx_get_bars =
+ * ================
+ *
+ * Overview:
+ * Retrieves the address ranges used to access control and status
+ * registers.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bdev - pointer to device information
+ * bar_start - pointer to store the start addresses
+ * bar_len - pointer to store the lengths of the areas
+ *
+ * Assumptions:
+ * I am sure there are some.
+ *
+ * Side Effects:
+ * None
+ */
+static void dfx_get_bars(struct device *bdev,
+ resource_size_t *bar_start, resource_size_t *bar_len)
+{
+ int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+
+ if (dfx_bus_pci) {
+ int num = dfx_use_mmio ? 0 : 1;
+
+ bar_start[0] = pci_resource_start(to_pci_dev(bdev), num);
+ bar_len[0] = pci_resource_len(to_pci_dev(bdev), num);
+ bar_start[2] = bar_start[1] = 0;
+ bar_len[2] = bar_len[1] = 0;
+ }
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+ resource_size_t bar_lo;
+ resource_size_t bar_hi;
+
+ if (dfx_use_mmio) {
+ bar_lo = inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_2);
+ bar_lo <<= 8;
+ bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_1);
+ bar_lo <<= 8;
+ bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_0);
+ bar_lo <<= 8;
+ bar_start[0] = bar_lo;
+ bar_hi = inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_2);
+ bar_hi <<= 8;
+ bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_1);
+ bar_hi <<= 8;
+ bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_0);
+ bar_hi <<= 8;
+ bar_len[0] = ((bar_hi - bar_lo) | PI_MEM_ADD_MASK_M) +
+ 1;
+ } else {
+ bar_start[0] = base_addr;
+ bar_len[0] = PI_ESIC_K_CSR_IO_LEN;
+ }
+ bar_start[1] = base_addr + PI_DEFEA_K_BURST_HOLDOFF;
+ bar_len[1] = PI_ESIC_K_BURST_HOLDOFF_LEN;
+ bar_start[2] = base_addr + PI_ESIC_K_ESIC_CSR;
+ bar_len[2] = PI_ESIC_K_ESIC_CSR_LEN;
+ }
+ if (dfx_bus_tc) {
+ bar_start[0] = to_tc_dev(bdev)->resource.start +
+ PI_TC_K_CSR_OFFSET;
+ bar_len[0] = PI_TC_K_CSR_LEN;
+ bar_start[2] = bar_start[1] = 0;
+ bar_len[2] = bar_len[1] = 0;
+ }
+}
+
+static const struct net_device_ops dfx_netdev_ops = {
+ .ndo_open = dfx_open,
+ .ndo_stop = dfx_close,
+ .ndo_start_xmit = dfx_xmt_queue_pkt,
+ .ndo_get_stats = dfx_ctl_get_stats,
+ .ndo_set_rx_mode = dfx_ctl_set_multicast_list,
+ .ndo_set_mac_address = dfx_ctl_set_mac_address,
+};
+
+/*
+ * ================
+ * = dfx_register =
+ * ================
+ *
+ * Overview:
+ * Initializes a supported FDDI controller
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bdev - pointer to device information
+ *
+ * Functional Description:
+ *
+ * Return Codes:
+ * 0 - This device (fddi0, fddi1, etc) configured successfully
+ * -EBUSY - Failed to get resources, or dfx_driver_init failed.
+ *
+ * Assumptions:
+ * It compiles so it should work :-( (PCI cards do :-)
+ *
+ * Side Effects:
+ * Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ * initialized and the board resources are read and stored in
+ * the device structure.
+ */
+static int dfx_register(struct device *bdev)
+{
+ static int version_disp;
+ int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ const char *print_name = dev_name(bdev);
+ struct net_device *dev;
+ DFX_board_t *bp; /* board pointer */
+ resource_size_t bar_start[3]; /* pointers to ports */
+ resource_size_t bar_len[3]; /* resource length */
+ int alloc_size; /* total buffer size used */
+ struct resource *region;
+ int err = 0;
+
+ if (!version_disp) { /* display version info if adapter is found */
+ version_disp = 1; /* set display flag to TRUE so that */
+ printk(version); /* we only display this string ONCE */
+ }
+
+ dev = alloc_fddidev(sizeof(*bp));
+ if (!dev) {
+ printk(KERN_ERR "%s: Unable to allocate fddidev, aborting\n",
+ print_name);
+ return -ENOMEM;
+ }
+
+ /* Enable PCI device. */
+ if (dfx_bus_pci) {
+ err = pci_enable_device(to_pci_dev(bdev));
+ if (err) {
+ pr_err("%s: Cannot enable PCI device, aborting\n",
+ print_name);
+ goto err_out;
+ }
+ }
+
+ SET_NETDEV_DEV(dev, bdev);
+
+ bp = netdev_priv(dev);
+ bp->bus_dev = bdev;
+ dev_set_drvdata(bdev, dev);
+
+ dfx_get_bars(bdev, bar_start, bar_len);
+ if (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0) {
+ pr_err("%s: Cannot use MMIO, no address set, aborting\n",
+ print_name);
+ pr_err("%s: Run ECU and set adapter's MMIO location\n",
+ print_name);
+ pr_err("%s: Or recompile driver with \"CONFIG_DEFXX_MMIO=n\""
+ "\n", print_name);
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ if (dfx_use_mmio)
+ region = request_mem_region(bar_start[0], bar_len[0],
+ print_name);
+ else
+ region = request_region(bar_start[0], bar_len[0], print_name);
+ if (!region) {
+ pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, "
+ "aborting\n", dfx_use_mmio ? "MMIO" : "I/O", print_name,
+ (long)bar_len[0], (long)bar_start[0]);
+ err = -EBUSY;
+ goto err_out_disable;
+ }
+ if (bar_start[1] != 0) {
+ region = request_region(bar_start[1], bar_len[1], print_name);
+ if (!region) {
+ pr_err("%s: Cannot reserve I/O resource "
+ "0x%lx @ 0x%lx, aborting\n", print_name,
+ (long)bar_len[1], (long)bar_start[1]);
+ err = -EBUSY;
+ goto err_out_csr_region;
+ }
+ }
+ if (bar_start[2] != 0) {
+ region = request_region(bar_start[2], bar_len[2], print_name);
+ if (!region) {
+ pr_err("%s: Cannot reserve I/O resource "
+ "0x%lx @ 0x%lx, aborting\n", print_name,
+ (long)bar_len[2], (long)bar_start[2]);
+ err = -EBUSY;
+ goto err_out_bh_region;
+ }
+ }
+
+ /* Set up I/O base address. */
+ if (dfx_use_mmio) {
+ bp->base.mem = ioremap_nocache(bar_start[0], bar_len[0]);
+ if (!bp->base.mem) {
+ printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);
+ err = -ENOMEM;
+ goto err_out_esic_region;
+ }
+ } else {
+ bp->base.port = bar_start[0];
+ dev->base_addr = bar_start[0];
+ }
+
+ /* Initialize new device structure */
+ dev->netdev_ops = &dfx_netdev_ops;
+
+ if (dfx_bus_pci)
+ pci_set_master(to_pci_dev(bdev));
+
+ if (dfx_driver_init(dev, print_name, bar_start[0]) != DFX_K_SUCCESS) {
+ err = -ENODEV;
+ goto err_out_unmap;
+ }
+
+ err = register_netdev(dev);
+ if (err)
+ goto err_out_kfree;
+
+ printk("%s: registered as %s\n", print_name, dev->name);
+ return 0;
+
+err_out_kfree:
+ alloc_size = sizeof(PI_DESCR_BLOCK) +
+ PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+ (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+ sizeof(PI_CONSUMER_BLOCK) +
+ (PI_ALIGN_K_DESC_BLK - 1);
+ if (bp->kmalloced)
+ dma_free_coherent(bdev, alloc_size,
+ bp->kmalloced, bp->kmalloced_dma);
+
+err_out_unmap:
+ if (dfx_use_mmio)
+ iounmap(bp->base.mem);
+
+err_out_esic_region:
+ if (bar_start[2] != 0)
+ release_region(bar_start[2], bar_len[2]);
+
+err_out_bh_region:
+ if (bar_start[1] != 0)
+ release_region(bar_start[1], bar_len[1]);
+
+err_out_csr_region:
+ if (dfx_use_mmio)
+ release_mem_region(bar_start[0], bar_len[0]);
+ else
+ release_region(bar_start[0], bar_len[0]);
+
+err_out_disable:
+ if (dfx_bus_pci)
+ pci_disable_device(to_pci_dev(bdev));
+
+err_out:
+ free_netdev(dev);
+ return err;
+}
+
+
+/*
+ * ================
+ * = dfx_bus_init =
+ * ================
+ *
+ * Overview:
+ * Initializes the bus-specific controller logic.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * Determine and save adapter IRQ in device table,
+ * then perform bus-specific logic initialization.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * bp->base has already been set with the proper
+ * base I/O address for this device.
+ *
+ * Side Effects:
+ * Interrupts are enabled at the adapter bus-specific logic.
+ * Note: Interrupts at the DMA engine (PDQ chip) are not
+ * enabled yet.
+ */
+
+static void dfx_bus_init(struct net_device *dev)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ u8 val;
+
+ DBG_printk("In dfx_bus_init...\n");
+
+ /* Initialize a pointer back to the net_device struct */
+ bp->dev = dev;
+
+ /* Initialize adapter based on bus type */
+
+ if (dfx_bus_tc)
+ dev->irq = to_tc_dev(bdev)->interrupt;
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+
+ /* Disable the board before fiddling with the decoders. */
+ outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL);
+
+ /* Get the interrupt level from the ESIC chip. */
+ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ val &= PI_CONFIG_STAT_0_M_IRQ;
+ val >>= PI_CONFIG_STAT_0_V_IRQ;
+
+ switch (val) {
+ case PI_CONFIG_STAT_0_IRQ_K_9:
+ dev->irq = 9;
+ break;
+
+ case PI_CONFIG_STAT_0_IRQ_K_10:
+ dev->irq = 10;
+ break;
+
+ case PI_CONFIG_STAT_0_IRQ_K_11:
+ dev->irq = 11;
+ break;
+
+ case PI_CONFIG_STAT_0_IRQ_K_15:
+ dev->irq = 15;
+ break;
+ }
+
+ /*
+ * Enable memory decoding (MEMCS1) and/or port decoding
+ * (IOCS1/IOCS0) as appropriate in Function Control
+ * Register. MEMCS1 or IOCS0 is used for PDQ registers,
+ * taking 16 32-bit words, while IOCS1 is used for the
+ * Burst Holdoff register, taking a single 32-bit word
+ * only. We use the slot-specific I/O range as per the
+ * ESIC spec, that is set bits 15:12 in the mask registers
+ * to mask them out.
+ */
+
+ /* Set the decode range of the board. */
+ val = 0;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_1);
+ val = PI_DEFEA_K_CSR_IO;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_0);
+
+ val = PI_IO_CMP_M_SLOT;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_1);
+ val = (PI_ESIC_K_CSR_IO_LEN - 1) & ~3;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_0);
+
+ val = 0;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_1);
+ val = PI_DEFEA_K_BURST_HOLDOFF;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_0);
+
+ val = PI_IO_CMP_M_SLOT;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_1);
+ val = (PI_ESIC_K_BURST_HOLDOFF_LEN - 1) & ~3;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);
+
+ /* Enable the decoders. */
+ val = PI_FUNCTION_CNTRL_M_IOCS1;
+ if (dfx_use_mmio)
+ val |= PI_FUNCTION_CNTRL_M_MEMCS1;
+ else
+ val |= PI_FUNCTION_CNTRL_M_IOCS0;
+ outb(val, base_addr + PI_ESIC_K_FUNCTION_CNTRL);
+
+ /*
+ * Enable access to the rest of the module
+ * (including PDQ and packet memory).
+ */
+ val = PI_SLOT_CNTRL_M_ENB;
+ outb(val, base_addr + PI_ESIC_K_SLOT_CNTRL);
+
+ /*
+ * Map PDQ registers into memory or port space. This is
+ * done with a bit in the Burst Holdoff register.
+ */
+ val = inb(base_addr + PI_DEFEA_K_BURST_HOLDOFF);
+ if (dfx_use_mmio)
+ val |= PI_BURST_HOLDOFF_M_MEM_MAP;
+ else
+ val &= ~PI_BURST_HOLDOFF_M_MEM_MAP;
+ outb(val, base_addr + PI_DEFEA_K_BURST_HOLDOFF);
+
+ /* Enable interrupts at EISA bus interface chip (ESIC) */
+ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ val |= PI_CONFIG_STAT_0_M_INT_ENB;
+ outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ }
+ if (dfx_bus_pci) {
+ struct pci_dev *pdev = to_pci_dev(bdev);
+
+ /* Get the interrupt level from the PCI Configuration Table */
+
+ dev->irq = pdev->irq;
+
+ /* Check Latency Timer and set if less than minimal */
+
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &val);
+ if (val < PFI_K_LAT_TIMER_MIN) {
+ val = PFI_K_LAT_TIMER_DEF;
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, val);
+ }
+
+ /* Enable interrupts at PCI bus interface chip (PFI) */
+ val = PFI_MODE_M_PDQ_INT_ENB | PFI_MODE_M_DMA_ENB;
+ dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, val);
+ }
+}
+
+/*
+ * ==================
+ * = dfx_bus_uninit =
+ * ==================
+ *
+ * Overview:
+ * Uninitializes the bus-specific controller logic.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * Perform bus-specific logic uninitialization.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * bp->base has already been set with the proper
+ * base I/O address for this device.
+ *
+ * Side Effects:
+ * Interrupts are disabled at the adapter bus-specific logic.
+ */
+
+static void dfx_bus_uninit(struct net_device *dev)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ u8 val;
+
+ DBG_printk("In dfx_bus_uninit...\n");
+
+ /* Uninitialize adapter based on bus type */
+
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+
+ /* Disable interrupts at EISA bus interface chip (ESIC) */
+ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ val &= ~PI_CONFIG_STAT_0_M_INT_ENB;
+ outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+
+ /* Disable the board. */
+ outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL);
+
+ /* Disable memory and port decoders. */
+ outb(0, base_addr + PI_ESIC_K_FUNCTION_CNTRL);
+ }
+ if (dfx_bus_pci) {
+ /* Disable interrupts at PCI bus interface chip (PFI) */
+ dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, 0);
+ }
+}
+
+
+/*
+ * ========================
+ * = dfx_bus_config_check =
+ * ========================
+ *
+ * Overview:
+ * Checks the configuration (burst size, full-duplex, etc.) If any parameters
+ * are illegal, then this routine will set new defaults.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * For Revision 1 FDDI EISA, Revision 2 or later FDDI EISA with rev E or later
+ * PDQ, and all FDDI PCI controllers, all values are legal.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * dfx_adap_init has NOT been called yet so burst size and other items have
+ * not been set.
+ *
+ * Side Effects:
+ * None
+ */
+
+static void dfx_bus_config_check(DFX_board_t *bp)
+{
+ struct device __maybe_unused *bdev = bp->bus_dev;
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int status; /* return code from adapter port control call */
+ u32 host_data; /* LW data returned from port control call */
+
+ DBG_printk("In dfx_bus_config_check...\n");
+
+ /* Configuration check only valid for EISA adapter */
+
+ if (dfx_bus_eisa) {
+ /*
+ * First check if revision 2 EISA controller. Rev. 1 cards used
+ * PDQ revision B, so no workaround needed in this case. Rev. 3
+ * cards used PDQ revision E, so no workaround needed in this
+ * case, either. Only Rev. 2 cards used either Rev. D or E
+ * chips, so we must verify the chip revision on Rev. 2 cards.
+ */
+ if (to_eisa_device(bdev)->id.driver_data == DEFEA_PROD_ID_2) {
+ /*
+ * Revision 2 FDDI EISA controller found,
+ * so let's check PDQ revision of adapter.
+ */
+ status = dfx_hw_port_ctrl_req(bp,
+ PI_PCTRL_M_SUB_CMD,
+ PI_SUB_CMD_K_PDQ_REV_GET,
+ 0,
+ &host_data);
+ if ((status != DFX_K_SUCCESS) || (host_data == 2))
+ {
+ /*
+ * Either we couldn't determine the PDQ revision, or
+ * we determined that it is at revision D. In either case,
+ * we need to implement the workaround.
+ */
+
+ /* Ensure that the burst size is set to 8 longwords or less */
+
+ switch (bp->burst_size)
+ {
+ case PI_PDATA_B_DMA_BURST_SIZE_32:
+ case PI_PDATA_B_DMA_BURST_SIZE_16:
+ bp->burst_size = PI_PDATA_B_DMA_BURST_SIZE_8;
+ break;
+
+ default:
+ break;
+ }
+
+ /* Ensure that full-duplex mode is not enabled */
+
+ bp->full_duplex_enb = PI_SNMP_K_FALSE;
+ }
+ }
+ }
+ }
+
+
+/*
+ * ===================
+ * = dfx_driver_init =
+ * ===================
+ *
+ * Overview:
+ * Initializes remaining adapter board structure information
+ * and makes sure adapter is in a safe state prior to dfx_open().
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * dev - pointer to device information
+ * print_name - printable device name
+ *
+ * Functional Description:
+ * This function allocates additional resources such as the host memory
+ * blocks needed by the adapter (eg. descriptor and consumer blocks).
+ * Remaining bus initialization steps are also completed. The adapter
+ * is also reset so that it is in the DMA_UNAVAILABLE state. The OS
+ * must call dfx_open() to open the adapter and bring it on-line.
+ *
+ * Return Codes:
+ * DFX_K_SUCCESS - initialization succeeded
+ * DFX_K_FAILURE - initialization failed - could not allocate memory
+ * or read adapter MAC address
+ *
+ * Assumptions:
+ * Memory allocated from pci_alloc_consistent() call is physically
+ * contiguous, locked memory.
+ *
+ * Side Effects:
+ * Adapter is reset and should be in DMA_UNAVAILABLE state before
+ * returning from this routine.
+ */
+
+static int dfx_driver_init(struct net_device *dev, const char *print_name,
+ resource_size_t bar_start)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ int alloc_size; /* total buffer size needed */
+ char *top_v, *curr_v; /* virtual addrs into memory block */
+ dma_addr_t top_p, curr_p; /* physical addrs into memory block */
+ u32 data; /* host data register value */
+ __le32 le32;
+ char *board_name = NULL;
+
+ DBG_printk("In dfx_driver_init...\n");
+
+ /* Initialize bus-specific hardware registers */
+
+ dfx_bus_init(dev);
+
+ /*
+ * Initialize default values for configurable parameters
+ *
+ * Note: All of these parameters are ones that a user may
+ * want to customize. It'd be nice to break these
+ * out into Space.c or someplace else that's more
+ * accessible/understandable than this file.
+ */
+
+ bp->full_duplex_enb = PI_SNMP_K_FALSE;
+ bp->req_ttrt = 8 * 12500; /* 8ms in 80 nanosec units */
+ bp->burst_size = PI_PDATA_B_DMA_BURST_SIZE_DEF;
+ bp->rcv_bufs_to_post = RCV_BUFS_DEF;
+
+ /*
+ * Ensure that HW configuration is OK
+ *
+ * Note: Depending on the hardware revision, we may need to modify
+ * some of the configurable parameters to workaround hardware
+ * limitations. We'll perform this configuration check AFTER
+ * setting the parameters to their default values.
+ */
+
+ dfx_bus_config_check(bp);
+
+ /* Disable PDQ interrupts first */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+ /* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+ (void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
+
+ /* Read the factory MAC address from the adapter then save it */
+
+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0,
+ &data) != DFX_K_SUCCESS) {
+ printk("%s: Could not read adapter factory MAC address!\n",
+ print_name);
+ return DFX_K_FAILURE;
+ }
+ le32 = cpu_to_le32(data);
+ memcpy(&bp->factory_mac_addr[0], &le32, sizeof(u32));
+
+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
+ &data) != DFX_K_SUCCESS) {
+ printk("%s: Could not read adapter factory MAC address!\n",
+ print_name);
+ return DFX_K_FAILURE;
+ }
+ le32 = cpu_to_le32(data);
+ memcpy(&bp->factory_mac_addr[4], &le32, sizeof(u16));
+
+ /*
+ * Set current address to factory address
+ *
+ * Note: Node address override support is handled through
+ * dfx_ctl_set_mac_address.
+ */
+
+ memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
+ if (dfx_bus_tc)
+ board_name = "DEFTA";
+ if (dfx_bus_eisa)
+ board_name = "DEFEA";
+ if (dfx_bus_pci)
+ board_name = "DEFPA";
+ pr_info("%s: %s at %s addr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
+ print_name, board_name, dfx_use_mmio ? "MMIO" : "I/O",
+ (long long)bar_start, dev->irq, dev->dev_addr);
+
+ /*
+ * Get memory for descriptor block, consumer block, and other buffers
+ * that need to be DMA read or written to by the adapter.
+ */
+
+ alloc_size = sizeof(PI_DESCR_BLOCK) +
+ PI_CMD_REQ_K_SIZE_MAX +
+ PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+ (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+ sizeof(PI_CONSUMER_BLOCK) +
+ (PI_ALIGN_K_DESC_BLK - 1);
+ bp->kmalloced = top_v = dma_zalloc_coherent(bp->bus_dev, alloc_size,
+ &bp->kmalloced_dma,
+ GFP_ATOMIC);
+ if (top_v == NULL)
+ return DFX_K_FAILURE;
+
+ top_p = bp->kmalloced_dma; /* get physical address of buffer */
+
+ /*
+ * To guarantee the 8K alignment required for the descriptor block, 8K - 1
+ * plus the amount of memory needed was allocated. The physical address
+ * is now 8K aligned. By carving up the memory in a specific order,
+ * we'll guarantee the alignment requirements for all other structures.
+ *
+ * Note: If the assumptions change regarding the non-paged, non-cached,
+ * physically contiguous nature of the memory block or the address
+ * alignments, then we'll need to implement a different algorithm
+ * for allocating the needed memory.
+ */
+
+ curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK);
+ curr_v = top_v + (curr_p - top_p);
+
+ /* Reserve space for descriptor block */
+
+ bp->descr_block_virt = (PI_DESCR_BLOCK *) curr_v;
+ bp->descr_block_phys = curr_p;
+ curr_v += sizeof(PI_DESCR_BLOCK);
+ curr_p += sizeof(PI_DESCR_BLOCK);
+
+ /* Reserve space for command request buffer */
+
+ bp->cmd_req_virt = (PI_DMA_CMD_REQ *) curr_v;
+ bp->cmd_req_phys = curr_p;
+ curr_v += PI_CMD_REQ_K_SIZE_MAX;
+ curr_p += PI_CMD_REQ_K_SIZE_MAX;
+
+ /* Reserve space for command response buffer */
+
+ bp->cmd_rsp_virt = (PI_DMA_CMD_RSP *) curr_v;
+ bp->cmd_rsp_phys = curr_p;
+ curr_v += PI_CMD_RSP_K_SIZE_MAX;
+ curr_p += PI_CMD_RSP_K_SIZE_MAX;
+
+ /* Reserve space for the LLC host receive queue buffers */
+
+ bp->rcv_block_virt = curr_v;
+ bp->rcv_block_phys = curr_p;
+
+#ifndef DYNAMIC_BUFFERS
+ curr_v += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
+ curr_p += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
+#endif
+
+ /* Reserve space for the consumer block */
+
+ bp->cons_block_virt = (PI_CONSUMER_BLOCK *) curr_v;
+ bp->cons_block_phys = curr_p;
+
+ /* Display virtual and physical addresses if debug driver */
+
+ DBG_printk("%s: Descriptor block virt = %p, phys = %pad\n",
+ print_name, bp->descr_block_virt, &bp->descr_block_phys);
+ DBG_printk("%s: Command Request buffer virt = %p, phys = %pad\n",
+ print_name, bp->cmd_req_virt, &bp->cmd_req_phys);
+ DBG_printk("%s: Command Response buffer virt = %p, phys = %pad\n",
+ print_name, bp->cmd_rsp_virt, &bp->cmd_rsp_phys);
+ DBG_printk("%s: Receive buffer block virt = %p, phys = %pad\n",
+ print_name, bp->rcv_block_virt, &bp->rcv_block_phys);
+ DBG_printk("%s: Consumer block virt = %p, phys = %pad\n",
+ print_name, bp->cons_block_virt, &bp->cons_block_phys);
+
+ return DFX_K_SUCCESS;
+}
+
+
+/*
+ * =================
+ * = dfx_adap_init =
+ * =================
+ *
+ * Overview:
+ * Brings the adapter to the link avail/link unavailable state.
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bp - pointer to board information
+ * get_buffers - non-zero if buffers to be allocated
+ *
+ * Functional Description:
+ * Issues the low-level firmware/hardware calls necessary to bring
+ * the adapter up, or to properly reset and restore adapter during
+ * run-time.
+ *
+ * Return Codes:
+ * DFX_K_SUCCESS - Adapter brought up successfully
+ * DFX_K_FAILURE - Adapter initialization failed
+ *
+ * Assumptions:
+ * bp->reset_type should be set to a valid reset type value before
+ * calling this routine.
+ *
+ * Side Effects:
+ * Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
+ * upon a successful return of this routine.
+ */
+
+static int dfx_adap_init(DFX_board_t *bp, int get_buffers)
+ {
+ DBG_printk("In dfx_adap_init...\n");
+
+ /* Disable PDQ interrupts first */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+ /* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+ if (dfx_hw_dma_uninit(bp, bp->reset_type) != DFX_K_SUCCESS)
+ {
+ printk("%s: Could not uninitialize/reset adapter!\n", bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /*
+ * When the PDQ is reset, some false Type 0 interrupts may be pending,
+ * so we'll acknowledge all Type 0 interrupts now before continuing.
+ */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, PI_HOST_INT_K_ACK_ALL_TYPE_0);
+
+ /*
+ * Clear Type 1 and Type 2 registers before going to DMA_AVAILABLE state
+ *
+ * Note: We only need to clear host copies of these registers. The PDQ reset
+ * takes care of the on-board register values.
+ */
+
+ bp->cmd_req_reg.lword = 0;
+ bp->cmd_rsp_reg.lword = 0;
+ bp->rcv_xmt_reg.lword = 0;
+
+ /* Clear consumer block before going to DMA_AVAILABLE state */
+
+ memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
+
+ /* Initialize the DMA Burst Size */
+
+ if (dfx_hw_port_ctrl_req(bp,
+ PI_PCTRL_M_SUB_CMD,
+ PI_SUB_CMD_K_BURST_SIZE_SET,
+ bp->burst_size,
+ NULL) != DFX_K_SUCCESS)
+ {
+ printk("%s: Could not set adapter burst size!\n", bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /*
+ * Set base address of Consumer Block
+ *
+ * Assumption: 32-bit physical address of consumer block is 64 byte
+ * aligned. That is, bits 0-5 of the address must be zero.
+ */
+
+ if (dfx_hw_port_ctrl_req(bp,
+ PI_PCTRL_M_CONS_BLOCK,
+ bp->cons_block_phys,
+ 0,
+ NULL) != DFX_K_SUCCESS)
+ {
+ printk("%s: Could not set consumer block address!\n", bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /*
+ * Set the base address of Descriptor Block and bring adapter
+ * to DMA_AVAILABLE state.
+ *
+ * Note: We also set the literal and data swapping requirements
+ * in this command.
+ *
+ * Assumption: 32-bit physical address of descriptor block
+ * is 8Kbyte aligned.
+ */
+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_INIT,
+ (u32)(bp->descr_block_phys |
+ PI_PDATA_A_INIT_M_BSWAP_INIT),
+ 0, NULL) != DFX_K_SUCCESS) {
+ printk("%s: Could not set descriptor block address!\n",
+ bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /* Set transmit flush timeout value */
+
+ bp->cmd_req_virt->cmd_type = PI_CMD_K_CHARS_SET;
+ bp->cmd_req_virt->char_set.item[0].item_code = PI_ITEM_K_FLUSH_TIME;
+ bp->cmd_req_virt->char_set.item[0].value = 3; /* 3 seconds */
+ bp->cmd_req_virt->char_set.item[0].item_index = 0;
+ bp->cmd_req_virt->char_set.item[1].item_code = PI_ITEM_K_EOL;
+ if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+ {
+ printk("%s: DMA command request failed!\n", bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /* Set the initial values for eFDXEnable and MACTReq MIB objects */
+
+ bp->cmd_req_virt->cmd_type = PI_CMD_K_SNMP_SET;
+ bp->cmd_req_virt->snmp_set.item[0].item_code = PI_ITEM_K_FDX_ENB_DIS;
+ bp->cmd_req_virt->snmp_set.item[0].value = bp->full_duplex_enb;
+ bp->cmd_req_virt->snmp_set.item[0].item_index = 0;
+ bp->cmd_req_virt->snmp_set.item[1].item_code = PI_ITEM_K_MAC_T_REQ;
+ bp->cmd_req_virt->snmp_set.item[1].value = bp->req_ttrt;
+ bp->cmd_req_virt->snmp_set.item[1].item_index = 0;
+ bp->cmd_req_virt->snmp_set.item[2].item_code = PI_ITEM_K_EOL;
+ if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+ {
+ printk("%s: DMA command request failed!\n", bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /* Initialize adapter CAM */
+
+ if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+ {
+ printk("%s: Adapter CAM update failed!\n", bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /* Initialize adapter filters */
+
+ if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+ {
+ printk("%s: Adapter filters update failed!\n", bp->dev->name);
+ return DFX_K_FAILURE;
+ }
+
+ /*
+ * Remove any existing dynamic buffers (i.e. if the adapter is being
+ * reinitialized)
+ */
+
+ if (get_buffers)
+ dfx_rcv_flush(bp);
+
+ /* Initialize receive descriptor block and produce buffers */
+
+ if (dfx_rcv_init(bp, get_buffers))
+ {
+ printk("%s: Receive buffer allocation failed\n", bp->dev->name);
+ if (get_buffers)
+ dfx_rcv_flush(bp);
+ return DFX_K_FAILURE;
+ }
+
+ /* Issue START command and bring adapter to LINK_(UN)AVAILABLE state */
+
+ bp->cmd_req_virt->cmd_type = PI_CMD_K_START;
+ if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+ {
+ printk("%s: Start command failed\n", bp->dev->name);
+ if (get_buffers)
+ dfx_rcv_flush(bp);
+ return DFX_K_FAILURE;
+ }
+
+ /* Initialization succeeded, reenable PDQ interrupts */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_ENABLE_DEF_INTS);
+ return DFX_K_SUCCESS;
+ }
+
+
+/*
+ * ============
+ * = dfx_open =
+ * ============
+ *
+ * Overview:
+ * Opens the adapter
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * This function brings the adapter to an operational state.
+ *
+ * Return Codes:
+ * 0 - Adapter was successfully opened
+ * -EAGAIN - Could not register IRQ or adapter initialization failed
+ *
+ * Assumptions:
+ * This routine should only be called for a device that was
+ * initialized successfully.
+ *
+ * Side Effects:
+ * Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
+ * if the open is successful.
+ */
+
+static int dfx_open(struct net_device *dev)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+ int ret;
+
+ DBG_printk("In dfx_open...\n");
+
+ /* Register IRQ - support shared interrupts by passing device ptr */
+
+ ret = request_irq(dev->irq, dfx_interrupt, IRQF_SHARED, dev->name,
+ dev);
+ if (ret) {
+ printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
+ return ret;
+ }
+
+ /*
+ * Set current address to factory MAC address
+ *
+ * Note: We've already done this step in dfx_driver_init.
+ * However, it's possible that a user has set a node
+ * address override, then closed and reopened the
+ * adapter. Unless we reset the device address field
+ * now, we'll continue to use the existing modified
+ * address.
+ */
+
+ memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
+
+ /* Clear local unicast/multicast address tables and counts */
+
+ memset(bp->uc_table, 0, sizeof(bp->uc_table));
+ memset(bp->mc_table, 0, sizeof(bp->mc_table));
+ bp->uc_count = 0;
+ bp->mc_count = 0;
+
+ /* Disable promiscuous filter settings */
+
+ bp->ind_group_prom = PI_FSTATE_K_BLOCK;
+ bp->group_prom = PI_FSTATE_K_BLOCK;
+
+ spin_lock_init(&bp->lock);
+
+ /* Reset and initialize adapter */
+
+ bp->reset_type = PI_PDATA_A_RESET_M_SKIP_ST; /* skip self-test */
+ if (dfx_adap_init(bp, 1) != DFX_K_SUCCESS)
+ {
+ printk(KERN_ERR "%s: Adapter open failed!\n", dev->name);
+ free_irq(dev->irq, dev);
+ return -EAGAIN;
+ }
+
+ /* Set device structure info */
+ netif_start_queue(dev);
+ return 0;
+}
+
+
+/*
+ * =============
+ * = dfx_close =
+ * =============
+ *
+ * Overview:
+ * Closes the device/module.
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * This routine closes the adapter and brings it to a safe state.
+ * The interrupt service routine is deregistered with the OS.
+ * The adapter can be opened again with another call to dfx_open().
+ *
+ * Return Codes:
+ * Always return 0.
+ *
+ * Assumptions:
+ * No further requests for this adapter are made after this routine is
+ * called. dfx_open() can be called to reset and reinitialize the
+ * adapter.
+ *
+ * Side Effects:
+ * Adapter should be in DMA_UNAVAILABLE state upon completion of this
+ * routine.
+ */
+
+static int dfx_close(struct net_device *dev)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+
+ DBG_printk("In dfx_close...\n");
+
+ /* Disable PDQ interrupts first */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+ /* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+ (void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
+
+ /*
+ * Flush any pending transmit buffers
+ *
+ * Note: It's important that we flush the transmit buffers
+ * BEFORE we clear our copy of the Type 2 register.
+ * Otherwise, we'll have no idea how many buffers
+ * we need to free.
+ */
+
+ dfx_xmt_flush(bp);
+
+ /*
+ * Clear Type 1 and Type 2 registers after adapter reset
+ *
+ * Note: Even though we're closing the adapter, it's
+ * possible that an interrupt will occur after
+ * dfx_close is called. Without some assurance to
+ * the contrary we want to make sure that we don't
+ * process receive and transmit LLC frames and update
+ * the Type 2 register with bad information.
+ */
+
+ bp->cmd_req_reg.lword = 0;
+ bp->cmd_rsp_reg.lword = 0;
+ bp->rcv_xmt_reg.lword = 0;
+
+ /* Clear consumer block for the same reason given above */
+
+ memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
+
+ /* Release all dynamically allocate skb in the receive ring. */
+
+ dfx_rcv_flush(bp);
+
+ /* Clear device structure flags */
+
+ netif_stop_queue(dev);
+
+ /* Deregister (free) IRQ */
+
+ free_irq(dev->irq, dev);
+
+ return 0;
+}
+
+
+/*
+ * ======================
+ * = dfx_int_pr_halt_id =
+ * ======================
+ *
+ * Overview:
+ * Displays halt id's in string form.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * Determine current halt id and display appropriate string.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * None
+ *
+ * Side Effects:
+ * None
+ */
+
+static void dfx_int_pr_halt_id(DFX_board_t *bp)
+ {
+ PI_UINT32 port_status; /* PDQ port status register value */
+ PI_UINT32 halt_id; /* PDQ port status halt ID */
+
+ /* Read the latest port status */
+
+ dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+
+ /* Display halt state transition information */
+
+ halt_id = (port_status & PI_PSTATUS_M_HALT_ID) >> PI_PSTATUS_V_HALT_ID;
+ switch (halt_id)
+ {
+ case PI_HALT_ID_K_SELFTEST_TIMEOUT:
+ printk("%s: Halt ID: Selftest Timeout\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_PARITY_ERROR:
+ printk("%s: Halt ID: Host Bus Parity Error\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_HOST_DIR_HALT:
+ printk("%s: Halt ID: Host-Directed Halt\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_SW_FAULT:
+ printk("%s: Halt ID: Adapter Software Fault\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_HW_FAULT:
+ printk("%s: Halt ID: Adapter Hardware Fault\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_PC_TRACE:
+ printk("%s: Halt ID: FDDI Network PC Trace Path Test\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_DMA_ERROR:
+ printk("%s: Halt ID: Adapter DMA Error\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_IMAGE_CRC_ERROR:
+ printk("%s: Halt ID: Firmware Image CRC Error\n", bp->dev->name);
+ break;
+
+ case PI_HALT_ID_K_BUS_EXCEPTION:
+ printk("%s: Halt ID: 68000 Bus Exception\n", bp->dev->name);
+ break;
+
+ default:
+ printk("%s: Halt ID: Unknown (code = %X)\n", bp->dev->name, halt_id);
+ break;
+ }
+ }
+
+
+/*
+ * ==========================
+ * = dfx_int_type_0_process =
+ * ==========================
+ *
+ * Overview:
+ * Processes Type 0 interrupts.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * Processes all enabled Type 0 interrupts. If the reason for the interrupt
+ * is a serious fault on the adapter, then an error message is displayed
+ * and the adapter is reset.
+ *
+ * One tricky potential timing window is the rapid succession of "link avail"
+ * "link unavail" state change interrupts. The acknowledgement of the Type 0
+ * interrupt must be done before reading the state from the Port Status
+ * register. This is true because a state change could occur after reading
+ * the data, but before acknowledging the interrupt. If this state change
+ * does happen, it would be lost because the driver is using the old state,
+ * and it will never know about the new state because it subsequently
+ * acknowledges the state change interrupt.
+ *
+ * INCORRECT CORRECT
+ * read type 0 int reasons read type 0 int reasons
+ * read adapter state ack type 0 interrupts
+ * ack type 0 interrupts read adapter state
+ * ... process interrupt ... ... process interrupt ...
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * None
+ *
+ * Side Effects:
+ * An adapter reset may occur if the adapter has any Type 0 error interrupts
+ * or if the port status indicates that the adapter is halted. The driver
+ * is responsible for reinitializing the adapter with the current CAM
+ * contents and adapter filter settings.
+ */
+
+static void dfx_int_type_0_process(DFX_board_t *bp)
+
+ {
+ PI_UINT32 type_0_status; /* Host Interrupt Type 0 register */
+ PI_UINT32 state; /* current adap state (from port status) */
+
+ /*
+ * Read host interrupt Type 0 register to determine which Type 0
+ * interrupts are pending. Immediately write it back out to clear
+ * those interrupts.
+ */
+
+ dfx_port_read_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, &type_0_status);
+ dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, type_0_status);
+
+ /* Check for Type 0 error interrupts */
+
+ if (type_0_status & (PI_TYPE_0_STAT_M_NXM |
+ PI_TYPE_0_STAT_M_PM_PAR_ERR |
+ PI_TYPE_0_STAT_M_BUS_PAR_ERR))
+ {
+ /* Check for Non-Existent Memory error */
+
+ if (type_0_status & PI_TYPE_0_STAT_M_NXM)
+ printk("%s: Non-Existent Memory Access Error\n", bp->dev->name);
+
+ /* Check for Packet Memory Parity error */
+
+ if (type_0_status & PI_TYPE_0_STAT_M_PM_PAR_ERR)
+ printk("%s: Packet Memory Parity Error\n", bp->dev->name);
+
+ /* Check for Host Bus Parity error */
+
+ if (type_0_status & PI_TYPE_0_STAT_M_BUS_PAR_ERR)
+ printk("%s: Host Bus Parity Error\n", bp->dev->name);
+
+ /* Reset adapter and bring it back on-line */
+
+ bp->link_available = PI_K_FALSE; /* link is no longer available */
+ bp->reset_type = 0; /* rerun on-board diagnostics */
+ printk("%s: Resetting adapter...\n", bp->dev->name);
+ if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
+ {
+ printk("%s: Adapter reset failed! Disabling adapter interrupts.\n", bp->dev->name);
+ dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+ return;
+ }
+ printk("%s: Adapter reset successful!\n", bp->dev->name);
+ return;
+ }
+
+ /* Check for transmit flush interrupt */
+
+ if (type_0_status & PI_TYPE_0_STAT_M_XMT_FLUSH)
+ {
+ /* Flush any pending xmt's and acknowledge the flush interrupt */
+
+ bp->link_available = PI_K_FALSE; /* link is no longer available */
+ dfx_xmt_flush(bp); /* flush any outstanding packets */
+ (void) dfx_hw_port_ctrl_req(bp,
+ PI_PCTRL_M_XMT_DATA_FLUSH_DONE,
+ 0,
+ 0,
+ NULL);
+ }
+
+ /* Check for adapter state change */
+
+ if (type_0_status & PI_TYPE_0_STAT_M_STATE_CHANGE)
+ {
+ /* Get latest adapter state */
+
+ state = dfx_hw_adap_state_rd(bp); /* get adapter state */
+ if (state == PI_STATE_K_HALTED)
+ {
+ /*
+ * Adapter has transitioned to HALTED state, try to reset
+ * adapter to bring it back on-line. If reset fails,
+ * leave the adapter in the broken state.
+ */
+
+ printk("%s: Controller has transitioned to HALTED state!\n", bp->dev->name);
+ dfx_int_pr_halt_id(bp); /* display halt id as string */
+
+ /* Reset adapter and bring it back on-line */
+
+ bp->link_available = PI_K_FALSE; /* link is no longer available */
+ bp->reset_type = 0; /* rerun on-board diagnostics */
+ printk("%s: Resetting adapter...\n", bp->dev->name);
+ if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
+ {
+ printk("%s: Adapter reset failed! Disabling adapter interrupts.\n", bp->dev->name);
+ dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+ return;
+ }
+ printk("%s: Adapter reset successful!\n", bp->dev->name);
+ }
+ else if (state == PI_STATE_K_LINK_AVAIL)
+ {
+ bp->link_available = PI_K_TRUE; /* set link available flag */
+ }
+ }
+ }
+
+
+/*
+ * ==================
+ * = dfx_int_common =
+ * ==================
+ *
+ * Overview:
+ * Interrupt service routine (ISR)
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * This is the ISR which processes incoming adapter interrupts.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * This routine assumes PDQ interrupts have not been disabled.
+ * When interrupts are disabled at the PDQ, the Port Status register
+ * is automatically cleared. This routine uses the Port Status
+ * register value to determine whether a Type 0 interrupt occurred,
+ * so it's important that adapter interrupts are not normally
+ * enabled/disabled at the PDQ.
+ *
+ * It's vital that this routine is NOT reentered for the
+ * same board and that the OS is not in another section of
+ * code (eg. dfx_xmt_queue_pkt) for the same board on a
+ * different thread.
+ *
+ * Side Effects:
+ * Pending interrupts are serviced. Depending on the type of
+ * interrupt, acknowledging and clearing the interrupt at the
+ * PDQ involves writing a register to clear the interrupt bit
+ * or updating completion indices.
+ */
+
+static void dfx_int_common(struct net_device *dev)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+ PI_UINT32 port_status; /* Port Status register */
+
+ /* Process xmt interrupts - frequent case, so always call this routine */
+
+ if(dfx_xmt_done(bp)) /* free consumed xmt packets */
+ netif_wake_queue(dev);
+
+ /* Process rcv interrupts - frequent case, so always call this routine */
+
+ dfx_rcv_queue_process(bp); /* service received LLC frames */
+
+ /*
+ * Transmit and receive producer and completion indices are updated on the
+ * adapter by writing to the Type 2 Producer register. Since the frequent
+ * case is that we'll be processing either LLC transmit or receive buffers,
+ * we'll optimize I/O writes by doing a single register write here.
+ */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+
+ /* Read PDQ Port Status register to find out which interrupts need processing */
+
+ dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+
+ /* Process Type 0 interrupts (if any) - infrequent, so only call when needed */
+
+ if (port_status & PI_PSTATUS_M_TYPE_0_PENDING)
+ dfx_int_type_0_process(bp); /* process Type 0 interrupts */
+ }
+
+
+/*
+ * =================
+ * = dfx_interrupt =
+ * =================
+ *
+ * Overview:
+ * Interrupt processing routine
+ *
+ * Returns:
+ * Whether a valid interrupt was seen.
+ *
+ * Arguments:
+ * irq - interrupt vector
+ * dev_id - pointer to device information
+ *
+ * Functional Description:
+ * This routine calls the interrupt processing routine for this adapter. It
+ * disables and reenables adapter interrupts, as appropriate. We can support
+ * shared interrupts since the incoming dev_id pointer provides our device
+ * structure context.
+ *
+ * Return Codes:
+ * IRQ_HANDLED - an IRQ was handled.
+ * IRQ_NONE - no IRQ was handled.
+ *
+ * Assumptions:
+ * The interrupt acknowledgement at the hardware level (eg. ACKing the PIC
+ * on Intel-based systems) is done by the operating system outside this
+ * routine.
+ *
+ * System interrupts are enabled through this call.
+ *
+ * Side Effects:
+ * Interrupts are disabled, then reenabled at the adapter.
+ */
+
+static irqreturn_t dfx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+
+ /* Service adapter interrupts */
+
+ if (dfx_bus_pci) {
+ u32 status;
+
+ dfx_port_read_long(bp, PFI_K_REG_STATUS, &status);
+ if (!(status & PFI_STATUS_M_PDQ_INT))
+ return IRQ_NONE;
+
+ spin_lock(&bp->lock);
+
+ /* Disable PDQ-PFI interrupts at PFI */
+ dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
+ PFI_MODE_M_DMA_ENB);
+
+ /* Call interrupt service routine for this adapter */
+ dfx_int_common(dev);
+
+ /* Clear PDQ interrupt status bit and reenable interrupts */
+ dfx_port_write_long(bp, PFI_K_REG_STATUS,
+ PFI_STATUS_M_PDQ_INT);
+ dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
+ (PFI_MODE_M_PDQ_INT_ENB |
+ PFI_MODE_M_DMA_ENB));
+
+ spin_unlock(&bp->lock);
+ }
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+ u8 status;
+
+ status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ if (!(status & PI_CONFIG_STAT_0_M_PEND))
+ return IRQ_NONE;
+
+ spin_lock(&bp->lock);
+
+ /* Disable interrupts at the ESIC */
+ status &= ~PI_CONFIG_STAT_0_M_INT_ENB;
+ outb(status, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+
+ /* Call interrupt service routine for this adapter */
+ dfx_int_common(dev);
+
+ /* Reenable interrupts at the ESIC */
+ status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ status |= PI_CONFIG_STAT_0_M_INT_ENB;
+ outb(status, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+
+ spin_unlock(&bp->lock);
+ }
+ if (dfx_bus_tc) {
+ u32 status;
+
+ dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &status);
+ if (!(status & (PI_PSTATUS_M_RCV_DATA_PENDING |
+ PI_PSTATUS_M_XMT_DATA_PENDING |
+ PI_PSTATUS_M_SMT_HOST_PENDING |
+ PI_PSTATUS_M_UNSOL_PENDING |
+ PI_PSTATUS_M_CMD_RSP_PENDING |
+ PI_PSTATUS_M_CMD_REQ_PENDING |
+ PI_PSTATUS_M_TYPE_0_PENDING)))
+ return IRQ_NONE;
+
+ spin_lock(&bp->lock);
+
+ /* Call interrupt service routine for this adapter */
+ dfx_int_common(dev);
+
+ spin_unlock(&bp->lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * =====================
+ * = dfx_ctl_get_stats =
+ * =====================
+ *
+ * Overview:
+ * Get statistics for FDDI adapter
+ *
+ * Returns:
+ * Pointer to FDDI statistics structure
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * Gets current MIB objects from adapter, then
+ * returns FDDI statistics structure as defined
+ * in if_fddi.h.
+ *
+ * Note: Since the FDDI statistics structure is
+ * still new and the device structure doesn't
+ * have an FDDI-specific get statistics handler,
+ * we'll return the FDDI statistics structure as
+ * a pointer to an Ethernet statistics structure.
+ * That way, at least the first part of the statistics
+ * structure can be decoded properly, and it allows
+ * "smart" applications to perform a second cast to
+ * decode the FDDI-specific statistics.
+ *
+ * We'll have to pay attention to this routine as the
+ * device structure becomes more mature and LAN media
+ * independent.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * None
+ *
+ * Side Effects:
+ * None
+ */
+
+static struct net_device_stats *dfx_ctl_get_stats(struct net_device *dev)
+ {
+ DFX_board_t *bp = netdev_priv(dev);
+
+ /* Fill the bp->stats structure with driver-maintained counters */
+
+ bp->stats.gen.rx_packets = bp->rcv_total_frames;
+ bp->stats.gen.tx_packets = bp->xmt_total_frames;
+ bp->stats.gen.rx_bytes = bp->rcv_total_bytes;
+ bp->stats.gen.tx_bytes = bp->xmt_total_bytes;
+ bp->stats.gen.rx_errors = bp->rcv_crc_errors +
+ bp->rcv_frame_status_errors +
+ bp->rcv_length_errors;
+ bp->stats.gen.tx_errors = bp->xmt_length_errors;
+ bp->stats.gen.rx_dropped = bp->rcv_discards;
+ bp->stats.gen.tx_dropped = bp->xmt_discards;
+ bp->stats.gen.multicast = bp->rcv_multicast_frames;
+ bp->stats.gen.collisions = 0; /* always zero (0) for FDDI */
+
+ /* Get FDDI SMT MIB objects */
+
+ bp->cmd_req_virt->cmd_type = PI_CMD_K_SMT_MIB_GET;
+ if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+ return (struct net_device_stats *)&bp->stats;
+
+ /* Fill the bp->stats structure with the SMT MIB object values */
+
+ memcpy(bp->stats.smt_station_id, &bp->cmd_rsp_virt->smt_mib_get.smt_station_id, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_station_id));
+ bp->stats.smt_op_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_op_version_id;
+ bp->stats.smt_hi_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_hi_version_id;
+ bp->stats.smt_lo_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_lo_version_id;
+ memcpy(bp->stats.smt_user_data, &bp->cmd_rsp_virt->smt_mib_get.smt_user_data, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_user_data));
+ bp->stats.smt_mib_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_mib_version_id;
+ bp->stats.smt_mac_cts = bp->cmd_rsp_virt->smt_mib_get.smt_mac_ct;
+ bp->stats.smt_non_master_cts = bp->cmd_rsp_virt->smt_mib_get.smt_non_master_ct;
+ bp->stats.smt_master_cts = bp->cmd_rsp_virt->smt_mib_get.smt_master_ct;
+ bp->stats.smt_available_paths = bp->cmd_rsp_virt->smt_mib_get.smt_available_paths;
+ bp->stats.smt_config_capabilities = bp->cmd_rsp_virt->smt_mib_get.smt_config_capabilities;
+ bp->stats.smt_config_policy = bp->cmd_rsp_virt->smt_mib_get.smt_config_policy;
+ bp->stats.smt_connection_policy = bp->cmd_rsp_virt->smt_mib_get.smt_connection_policy;
+ bp->stats.smt_t_notify = bp->cmd_rsp_virt->smt_mib_get.smt_t_notify;
+ bp->stats.smt_stat_rpt_policy = bp->cmd_rsp_virt->smt_mib_get.smt_stat_rpt_policy;
+ bp->stats.smt_trace_max_expiration = bp->cmd_rsp_virt->smt_mib_get.smt_trace_max_expiration;
+ bp->stats.smt_bypass_present = bp->cmd_rsp_virt->smt_mib_get.smt_bypass_present;
+ bp->stats.smt_ecm_state = bp->cmd_rsp_virt->smt_mib_get.smt_ecm_state;
+ bp->stats.smt_cf_state = bp->cmd_rsp_virt->smt_mib_get.smt_cf_state;
+ bp->stats.smt_remote_disconnect_flag = bp->cmd_rsp_virt->smt_mib_get.smt_remote_disconnect_flag;
+ bp->stats.smt_station_status = bp->cmd_rsp_virt->smt_mib_get.smt_station_status;
+ bp->stats.smt_peer_wrap_flag = bp->cmd_rsp_virt->smt_mib_get.smt_peer_wrap_flag;
+ bp->stats.smt_time_stamp = bp->cmd_rsp_virt->smt_mib_get.smt_msg_time_stamp.ls;
+ bp->stats.smt_transition_time_stamp = bp->cmd_rsp_virt->smt_mib_get.smt_transition_time_stamp.ls;
+ bp->stats.mac_frame_status_functions = bp->cmd_rsp_virt->smt_mib_get.mac_frame_status_functions;
+ bp->stats.mac_t_max_capability = bp->cmd_rsp_virt->smt_mib_get.mac_t_max_capability;
+ bp->stats.mac_tvx_capability = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_capability;
+ bp->stats.mac_available_paths = bp->cmd_rsp_virt->smt_mib_get.mac_available_paths;
+ bp->stats.mac_current_path = bp->cmd_rsp_virt->smt_mib_get.mac_current_path;
+ memcpy(bp->stats.mac_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_upstream_nbr, FDDI_K_ALEN);
+ memcpy(bp->stats.mac_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_downstream_nbr, FDDI_K_ALEN);
+ memcpy(bp->stats.mac_old_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_upstream_nbr, FDDI_K_ALEN);
+ memcpy(bp->stats.mac_old_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_downstream_nbr, FDDI_K_ALEN);
+ bp->stats.mac_dup_address_test = bp->cmd_rsp_virt->smt_mib_get.mac_dup_address_test;
+ bp->stats.mac_requested_paths = bp->cmd_rsp_virt->smt_mib_get.mac_requested_paths;
+ bp->stats.mac_downstream_port_type = bp->cmd_rsp_virt->smt_mib_get.mac_downstream_port_type;
+ memcpy(bp->stats.mac_smt_address, &bp->cmd_rsp_virt->smt_mib_get.mac_smt_address, FDDI_K_ALEN);
+ bp->stats.mac_t_req = bp->cmd_rsp_virt->smt_mib_get.mac_t_req;
+ bp->stats.mac_t_neg = bp->cmd_rsp_virt->smt_mib_get.mac_t_neg;
+ bp->stats.mac_t_max = bp->cmd_rsp_virt->smt_mib_get.mac_t_max;
+ bp->stats.mac_tvx_value = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_value;
+ bp->stats.mac_frame_error_threshold = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_threshold;
+ bp->stats.mac_frame_error_ratio = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_ratio;
+ bp->stats.mac_rmt_state = bp->cmd_rsp_virt->smt_mib_get.mac_rmt_state;
+ bp->stats.mac_da_flag = bp->cmd_rsp_virt->smt_mib_get.mac_da_flag;
+ bp->stats.mac_una_da_flag = bp->cmd_rsp_virt->smt_mib_get.mac_unda_flag;
+ bp->stats.mac_frame_error_flag = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_flag;
+ bp->stats.mac_ma_unitdata_available = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_available;
+ bp->stats.mac_hardware_present = bp->cmd_rsp_virt->smt_mib_get.mac_hardware_present;
+ bp->stats.mac_ma_unitdata_enable = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_enable;
+ bp->stats.path_tvx_lower_bound = bp->cmd_rsp_virt->smt_mib_get.path_tvx_lower_bound;
+ bp->stats.path_t_max_lower_bound = bp->cmd_rsp_virt->smt_mib_get.path_t_max_lower_bound;
+ bp->stats.path_max_t_req = bp->cmd_rsp_virt->smt_mib_get.path_max_t_req;
+ memcpy(bp->stats.path_configuration, &bp->cmd_rsp_virt->smt_mib_get.path_configuration, sizeof(bp->cmd_rsp_virt->smt_mib_get.path_configuration));
+ bp->stats.port_my_type[0] = bp->cmd_rsp_virt->smt_mib_get.port_my_type[0];
+ bp->stats.port_my_type[1] = bp->cmd_rsp_virt->smt_mib_get.port_my_type[1];
+ bp->stats.port_neighbor_type[0] = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[0];
+ bp->stats.port_neighbor_type[1] = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[1];
+ bp->stats.port_connection_policies[0] = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[0];
+ bp->stats.port_connection_policies[1] = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[1];
+ bp->stats.port_mac_indicated[0] = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[0];
+ bp->stats.port_mac_indicated[1] = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[1];
+ bp->stats.port_current_path[0] = bp->cmd_rsp_virt->smt_mib_get.port_current_path[0];
+ bp->stats.port_current_path[1] = bp->cmd_rsp_virt->smt_mib_get.port_current_path[1];
+ memcpy(&bp->stats.port_requested_paths[0*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[0], 3);
+ memcpy(&bp->stats.port_requested_paths[1*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[1], 3);
+ bp->stats.port_mac_placement[0] = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[0];
+ bp->stats.port_mac_placement[1] = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[1];
+ bp->stats.port_available_paths[0] = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[0];
+ bp->stats.port_available_paths[1] = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[1];
+ bp->stats.port_pmd_class[0] = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[0];
+ bp->stats.port_pmd_class[1] = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[1];
+ bp->stats.port_connection_capabilities[0] = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[0];
+ bp->stats.port_connection_capabilities[1] = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[1];
+ bp->stats.port_bs_flag[0] = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[0];
+ bp->stats.port_bs_flag[1] = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[1];
+ bp->stats.port_ler_estimate[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[0];
+ bp->stats.port_ler_estimate[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[1];
+ bp->stats.port_ler_cutoff[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[0];
+ bp->stats.port_ler_cutoff[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[1];
+ bp->stats.port_ler_alarm[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[0];
+ bp->stats.port_ler_alarm[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[1];
+ bp->stats.port_connect_state[0] = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[0];
+ bp->stats.port_connect_state[1] = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[1];
+ bp->stats.port_pcm_state[0] = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[0];
+ bp->stats.port_pcm_state[1] = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[1];
+ bp->stats.port_pc_withhold[0] = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[0];
+ bp->stats.port_pc_withhold[1] = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[1];
+ bp->stats.port_ler_flag[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[0];
+ bp->stats.port_ler_flag[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[1];
+ bp->stats.port_hardware_present[0] = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[0];
+ bp->stats.port_hardware_present[1] = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[1];
+
+ /* Get FDDI counters */
+
+ bp->cmd_req_virt->cmd_type = PI_CMD_K_CNTRS_GET;
+ if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+ return (struct net_device_stats *)&bp->stats;
+
+ /* Fill the bp->stats structure with the FDDI counter values */
+
+ bp->stats.mac_frame_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.frame_cnt.ls;
+ bp->stats.mac_copied_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.copied_cnt.ls;
+ bp->stats.mac_transmit_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.transmit_cnt.ls;
+ bp->stats.mac_error_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.error_cnt.ls;
+ bp->stats.mac_lost_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.lost_cnt.ls;
+ bp->stats.port_lct_fail_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[0].ls;
+ bp->stats.port_lct_fail_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[1].ls;
+ bp->stats.port_lem_reject_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[0].ls;
+ bp->stats.port_lem_reject_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[1].ls;
+ bp->stats.port_lem_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[0].ls;
+ bp->stats.port_lem_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[1].ls;
+
+ return (struct net_device_stats *)&bp->stats;
+ }
+
+
+/*
+ * ==============================
+ * = dfx_ctl_set_multicast_list =
+ * ==============================
+ *
+ * Overview:
+ * Enable/Disable LLC frame promiscuous mode reception
+ * on the adapter and/or update multicast address table.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * This routine follows a fairly simple algorithm for setting the
+ * adapter filters and CAM:
+ *
+ * if IFF_PROMISC flag is set
+ * enable LLC individual/group promiscuous mode
+ * else
+ * disable LLC individual/group promiscuous mode
+ * if number of incoming multicast addresses >
+ * (CAM max size - number of unicast addresses in CAM)
+ * enable LLC group promiscuous mode
+ * set driver-maintained multicast address count to zero
+ * else
+ * disable LLC group promiscuous mode
+ * set driver-maintained multicast address count to incoming count
+ * update adapter CAM
+ * update adapter filters
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * Multicast addresses are presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ * On-board adapter CAM and filters are updated.
+ */
+
+static void dfx_ctl_set_multicast_list(struct net_device *dev)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+ int i; /* used as index in for loop */
+ struct netdev_hw_addr *ha;
+
+ /* Enable LLC frame promiscuous mode, if necessary */
+
+ if (dev->flags & IFF_PROMISC)
+ bp->ind_group_prom = PI_FSTATE_K_PASS; /* Enable LLC ind/group prom mode */
+
+ /* Else, update multicast address table */
+
+ else
+ {
+ bp->ind_group_prom = PI_FSTATE_K_BLOCK; /* Disable LLC ind/group prom mode */
+ /*
+ * Check whether incoming multicast address count exceeds table size
+ *
+ * Note: The adapters utilize an on-board 64 entry CAM for
+ * supporting perfect filtering of multicast packets
+ * and bridge functions when adding unicast addresses.
+ * There is no hash function available. To support
+ * additional multicast addresses, the all multicast
+ * filter (LLC group promiscuous mode) must be enabled.
+ *
+ * The firmware reserves two CAM entries for SMT-related
+ * multicast addresses, which leaves 62 entries available.
+ * The following code ensures that we're not being asked
+ * to add more than 62 addresses to the CAM. If we are,
+ * the driver will enable the all multicast filter.
+ * Should the number of multicast addresses drop below
+ * the high water mark, the filter will be disabled and
+ * perfect filtering will be used.
+ */
+
+ if (netdev_mc_count(dev) > (PI_CMD_ADDR_FILTER_K_SIZE - bp->uc_count))
+ {
+ bp->group_prom = PI_FSTATE_K_PASS; /* Enable LLC group prom mode */
+ bp->mc_count = 0; /* Don't add mc addrs to CAM */
+ }
+ else
+ {
+ bp->group_prom = PI_FSTATE_K_BLOCK; /* Disable LLC group prom mode */
+ bp->mc_count = netdev_mc_count(dev); /* Add mc addrs to CAM */
+ }
+
+ /* Copy addresses to multicast address table, then update adapter CAM */
+
+ i = 0;
+ netdev_for_each_mc_addr(ha, dev)
+ memcpy(&bp->mc_table[i++ * FDDI_K_ALEN],
+ ha->addr, FDDI_K_ALEN);
+
+ if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+ {
+ DBG_printk("%s: Could not update multicast address table!\n", dev->name);
+ }
+ else
+ {
+ DBG_printk("%s: Multicast address table updated! Added %d addresses.\n", dev->name, bp->mc_count);
+ }
+ }
+
+ /* Update adapter filters */
+
+ if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+ {
+ DBG_printk("%s: Could not update adapter filters!\n", dev->name);
+ }
+ else
+ {
+ DBG_printk("%s: Adapter filters updated!\n", dev->name);
+ }
+ }
+
+
+/*
+ * ===========================
+ * = dfx_ctl_set_mac_address =
+ * ===========================
+ *
+ * Overview:
+ * Add node address override (unicast address) to adapter
+ * CAM and update dev_addr field in device table.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * dev - pointer to device information
+ * addr - pointer to sockaddr structure containing unicast address to add
+ *
+ * Functional Description:
+ * The adapter supports node address overrides by adding one or more
+ * unicast addresses to the adapter CAM. This is similar to adding
+ * multicast addresses. In this routine we'll update the driver and
+ * device structures with the new address, then update the adapter CAM
+ * to ensure that the adapter will copy and strip frames destined and
+ * sourced by that address.
+ *
+ * Return Codes:
+ * Always returns zero.
+ *
+ * Assumptions:
+ * The address pointed to by addr->sa_data is a valid unicast
+ * address and is presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ * On-board adapter CAM is updated. On-board adapter filters
+ * may be updated.
+ */
+
+static int dfx_ctl_set_mac_address(struct net_device *dev, void *addr)
+ {
+ struct sockaddr *p_sockaddr = (struct sockaddr *)addr;
+ DFX_board_t *bp = netdev_priv(dev);
+
+ /* Copy unicast address to driver-maintained structs and update count */
+
+ memcpy(dev->dev_addr, p_sockaddr->sa_data, FDDI_K_ALEN); /* update device struct */
+ memcpy(&bp->uc_table[0], p_sockaddr->sa_data, FDDI_K_ALEN); /* update driver struct */
+ bp->uc_count = 1;
+
+ /*
+ * Verify we're not exceeding the CAM size by adding unicast address
+ *
+ * Note: It's possible that before entering this routine we've
+ * already filled the CAM with 62 multicast addresses.
+ * Since we need to place the node address override into
+ * the CAM, we have to check to see that we're not
+ * exceeding the CAM size. If we are, we have to enable
+ * the LLC group (multicast) promiscuous mode filter as
+ * in dfx_ctl_set_multicast_list.
+ */
+
+ if ((bp->uc_count + bp->mc_count) > PI_CMD_ADDR_FILTER_K_SIZE)
+ {
+ bp->group_prom = PI_FSTATE_K_PASS; /* Enable LLC group prom mode */
+ bp->mc_count = 0; /* Don't add mc addrs to CAM */
+
+ /* Update adapter filters */
+
+ if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+ {
+ DBG_printk("%s: Could not update adapter filters!\n", dev->name);
+ }
+ else
+ {
+ DBG_printk("%s: Adapter filters updated!\n", dev->name);
+ }
+ }
+
+ /* Update adapter CAM with new unicast address */
+
+ if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+ {
+ DBG_printk("%s: Could not set new MAC address!\n", dev->name);
+ }
+ else
+ {
+ DBG_printk("%s: Adapter CAM updated with new MAC address\n", dev->name);
+ }
+ return 0; /* always return zero */
+ }
+
+
+/*
+ * ======================
+ * = dfx_ctl_update_cam =
+ * ======================
+ *
+ * Overview:
+ * Procedure to update adapter CAM (Content Addressable Memory)
+ * with desired unicast and multicast address entries.
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * Updates adapter CAM with current contents of board structure
+ * unicast and multicast address tables. Since there are only 62
+ * free entries in CAM, this routine ensures that the command
+ * request buffer is not overrun.
+ *
+ * Return Codes:
+ * DFX_K_SUCCESS - Request succeeded
+ * DFX_K_FAILURE - Request failed
+ *
+ * Assumptions:
+ * All addresses being added (unicast and multicast) are in canonical
+ * order.
+ *
+ * Side Effects:
+ * On-board adapter CAM is updated.
+ */
+
+static int dfx_ctl_update_cam(DFX_board_t *bp)
+ {
+ int i; /* used as index */
+ PI_LAN_ADDR *p_addr; /* pointer to CAM entry */
+
+ /*
+ * Fill in command request information
+ *
+ * Note: Even though both the unicast and multicast address
+ * table entries are stored as contiguous 6 byte entries,
+ * the firmware address filter set command expects each
+ * entry to be two longwords (8 bytes total). We must be
+ * careful to only copy the six bytes of each unicast and
+ * multicast table entry into each command entry. This
+ * is also why we must first clear the entire command
+ * request buffer.
+ */
+
+ memset(bp->cmd_req_virt, 0, PI_CMD_REQ_K_SIZE_MAX); /* first clear buffer */
+ bp->cmd_req_virt->cmd_type = PI_CMD_K_ADDR_FILTER_SET;
+ p_addr = &bp->cmd_req_virt->addr_filter_set.entry[0];
+
+ /* Now add unicast addresses to command request buffer, if any */
+
+ for (i=0; i < (int)bp->uc_count; i++)
+ {
+ if (i < PI_CMD_ADDR_FILTER_K_SIZE)
+ {
+ memcpy(p_addr, &bp->uc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
+ p_addr++; /* point to next command entry */
+ }
+ }
+
+ /* Now add multicast addresses to command request buffer, if any */
+
+ for (i=0; i < (int)bp->mc_count; i++)
+ {
+ if ((i + bp->uc_count) < PI_CMD_ADDR_FILTER_K_SIZE)
+ {
+ memcpy(p_addr, &bp->mc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
+ p_addr++; /* point to next command entry */
+ }
+ }
+
+ /* Issue command to update adapter CAM, then return */
+
+ if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+ return DFX_K_FAILURE;
+ return DFX_K_SUCCESS;
+ }
+
+
+/*
+ * ==========================
+ * = dfx_ctl_update_filters =
+ * ==========================
+ *
+ * Overview:
+ * Procedure to update adapter filters with desired
+ * filter settings.
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * Enables or disables filter using current filter settings.
+ *
+ * Return Codes:
+ * DFX_K_SUCCESS - Request succeeded.
+ * DFX_K_FAILURE - Request failed.
+ *
+ * Assumptions:
+ * We must always pass up packets destined to the broadcast
+ * address (FF-FF-FF-FF-FF-FF), so we'll always keep the
+ * broadcast filter enabled.
+ *
+ * Side Effects:
+ * On-board adapter filters are updated.
+ */
+
+static int dfx_ctl_update_filters(DFX_board_t *bp)
+ {
+ int i = 0; /* used as index */
+
+ /* Fill in command request information */
+
+ bp->cmd_req_virt->cmd_type = PI_CMD_K_FILTERS_SET;
+
+ /* Initialize Broadcast filter - * ALWAYS ENABLED * */
+
+ bp->cmd_req_virt->filter_set.item[i].item_code = PI_ITEM_K_BROADCAST;
+ bp->cmd_req_virt->filter_set.item[i++].value = PI_FSTATE_K_PASS;
+
+ /* Initialize LLC Individual/Group Promiscuous filter */
+
+ bp->cmd_req_virt->filter_set.item[i].item_code = PI_ITEM_K_IND_GROUP_PROM;
+ bp->cmd_req_virt->filter_set.item[i++].value = bp->ind_group_prom;
+
+ /* Initialize LLC Group Promiscuous filter */
+
+ bp->cmd_req_virt->filter_set.item[i].item_code = PI_ITEM_K_GROUP_PROM;
+ bp->cmd_req_virt->filter_set.item[i++].value = bp->group_prom;
+
+ /* Terminate the item code list */
+
+ bp->cmd_req_virt->filter_set.item[i].item_code = PI_ITEM_K_EOL;
+
+ /* Issue command to update adapter filters, then return */
+
+ if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+ return DFX_K_FAILURE;
+ return DFX_K_SUCCESS;
+ }
+
+
+/*
+ * ======================
+ * = dfx_hw_dma_cmd_req =
+ * ======================
+ *
+ * Overview:
+ * Sends PDQ DMA command to adapter firmware
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * The command request and response buffers are posted to the adapter in the manner
+ * described in the PDQ Port Specification:
+ *
+ * 1. Command Response Buffer is posted to adapter.
+ * 2. Command Request Buffer is posted to adapter.
+ * 3. Command Request consumer index is polled until it indicates that request
+ * buffer has been DMA'd to adapter.
+ * 4. Command Response consumer index is polled until it indicates that response
+ * buffer has been DMA'd from adapter.
+ *
+ * This ordering ensures that a response buffer is already available for the firmware
+ * to use once it's done processing the request buffer.
+ *
+ * Return Codes:
+ * DFX_K_SUCCESS - DMA command succeeded
+ * DFX_K_OUTSTATE - Adapter is NOT in proper state
+ * DFX_K_HW_TIMEOUT - DMA command timed out
+ *
+ * Assumptions:
+ * Command request buffer has already been filled with desired DMA command.
+ *
+ * Side Effects:
+ * None
+ */
+
+static int dfx_hw_dma_cmd_req(DFX_board_t *bp)
+ {
+ int status; /* adapter status */
+ int timeout_cnt; /* used in for loops */
+
+ /* Make sure the adapter is in a state that we can issue the DMA command in */
+
+ status = dfx_hw_adap_state_rd(bp);
+ if ((status == PI_STATE_K_RESET) ||
+ (status == PI_STATE_K_HALTED) ||
+ (status == PI_STATE_K_DMA_UNAVAIL) ||
+ (status == PI_STATE_K_UPGRADE))
+ return DFX_K_OUTSTATE;
+
+ /* Put response buffer on the command response queue */
+
+ bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+ ((PI_CMD_RSP_K_SIZE_MAX / PI_ALIGN_K_CMD_RSP_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+ bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_1 = bp->cmd_rsp_phys;
+
+ /* Bump (and wrap) the producer index and write out to register */
+
+ bp->cmd_rsp_reg.index.prod += 1;
+ bp->cmd_rsp_reg.index.prod &= PI_CMD_RSP_K_NUM_ENTRIES-1;
+ dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
+
+ /* Put request buffer on the command request queue */
+
+ bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_0 = (u32) (PI_XMT_DESCR_M_SOP |
+ PI_XMT_DESCR_M_EOP | (PI_CMD_REQ_K_SIZE_MAX << PI_XMT_DESCR_V_SEG_LEN));
+ bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_1 = bp->cmd_req_phys;
+
+ /* Bump (and wrap) the producer index and write out to register */
+
+ bp->cmd_req_reg.index.prod += 1;
+ bp->cmd_req_reg.index.prod &= PI_CMD_REQ_K_NUM_ENTRIES-1;
+ dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
+
+ /*
+ * Here we wait for the command request consumer index to be equal
+ * to the producer, indicating that the adapter has DMAed the request.
+ */
+
+ for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
+ {
+ if (bp->cmd_req_reg.index.prod == (u8)(bp->cons_block_virt->cmd_req))
+ break;
+ udelay(100); /* wait for 100 microseconds */
+ }
+ if (timeout_cnt == 0)
+ return DFX_K_HW_TIMEOUT;
+
+ /* Bump (and wrap) the completion index and write out to register */
+
+ bp->cmd_req_reg.index.comp += 1;
+ bp->cmd_req_reg.index.comp &= PI_CMD_REQ_K_NUM_ENTRIES-1;
+ dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
+
+ /*
+ * Here we wait for the command response consumer index to be equal
+ * to the producer, indicating that the adapter has DMAed the response.
+ */
+
+ for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
+ {
+ if (bp->cmd_rsp_reg.index.prod == (u8)(bp->cons_block_virt->cmd_rsp))
+ break;
+ udelay(100); /* wait for 100 microseconds */
+ }
+ if (timeout_cnt == 0)
+ return DFX_K_HW_TIMEOUT;
+
+ /* Bump (and wrap) the completion index and write out to register */
+
+ bp->cmd_rsp_reg.index.comp += 1;
+ bp->cmd_rsp_reg.index.comp &= PI_CMD_RSP_K_NUM_ENTRIES-1;
+ dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
+ return DFX_K_SUCCESS;
+ }
+
+
+/*
+ * ========================
+ * = dfx_hw_port_ctrl_req =
+ * ========================
+ *
+ * Overview:
+ * Sends PDQ port control command to adapter firmware
+ *
+ * Returns:
+ * Host data register value in host_data if ptr is not NULL
+ *
+ * Arguments:
+ * bp - pointer to board information
+ * command - port control command
+ * data_a - port data A register value
+ * data_b - port data B register value
+ * host_data - ptr to host data register value
+ *
+ * Functional Description:
+ * Send generic port control command to adapter by writing
+ * to various PDQ port registers, then polling for completion.
+ *
+ * Return Codes:
+ * DFX_K_SUCCESS - port control command succeeded
+ * DFX_K_HW_TIMEOUT - port control command timed out
+ *
+ * Assumptions:
+ * None
+ *
+ * Side Effects:
+ * None
+ */
+
+static int dfx_hw_port_ctrl_req(
+ DFX_board_t *bp,
+ PI_UINT32 command,
+ PI_UINT32 data_a,
+ PI_UINT32 data_b,
+ PI_UINT32 *host_data
+ )
+
+ {
+ PI_UINT32 port_cmd; /* Port Control command register value */
+ int timeout_cnt; /* used in for loops */
+
+ /* Set Command Error bit in command longword */
+
+ port_cmd = (PI_UINT32) (command | PI_PCTRL_M_CMD_ERROR);
+
+ /* Issue port command to the adapter */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, data_a);
+ dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_B, data_b);
+ dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_CTRL, port_cmd);
+
+ /* Now wait for command to complete */
+
+ if (command == PI_PCTRL_M_BLAST_FLASH)
+ timeout_cnt = 600000; /* set command timeout count to 60 seconds */
+ else
+ timeout_cnt = 20000; /* set command timeout count to 2 seconds */
+
+ for (; timeout_cnt > 0; timeout_cnt--)
+ {
+ dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_CTRL, &port_cmd);
+ if (!(port_cmd & PI_PCTRL_M_CMD_ERROR))
+ break;
+ udelay(100); /* wait for 100 microseconds */
+ }
+ if (timeout_cnt == 0)
+ return DFX_K_HW_TIMEOUT;
+
+ /*
+ * If the address of host_data is non-zero, assume caller has supplied a
+ * non NULL pointer, and return the contents of the HOST_DATA register in
+ * it.
+ */
+
+ if (host_data != NULL)
+ dfx_port_read_long(bp, PI_PDQ_K_REG_HOST_DATA, host_data);
+ return DFX_K_SUCCESS;
+ }
+
+
+/*
+ * =====================
+ * = dfx_hw_adap_reset =
+ * =====================
+ *
+ * Overview:
+ * Resets adapter
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ * type - type of reset to perform
+ *
+ * Functional Description:
+ * Issue soft reset to adapter by writing to PDQ Port Reset
+ * register. Use incoming reset type to tell adapter what
+ * kind of reset operation to perform.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * This routine merely issues a soft reset to the adapter.
+ * It is expected that after this routine returns, the caller
+ * will appropriately poll the Port Status register for the
+ * adapter to enter the proper state.
+ *
+ * Side Effects:
+ * Internal adapter registers are cleared.
+ */
+
+static void dfx_hw_adap_reset(
+ DFX_board_t *bp,
+ PI_UINT32 type
+ )
+
+ {
+ /* Set Reset type and assert reset */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, type); /* tell adapter type of reset */
+ dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, PI_RESET_M_ASSERT_RESET);
+
+ /* Wait for at least 1 Microsecond according to the spec. We wait 20 just to be safe */
+
+ udelay(20);
+
+ /* Deassert reset */
+
+ dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, 0);
+ }
+
+
+/*
+ * ========================
+ * = dfx_hw_adap_state_rd =
+ * ========================
+ *
+ * Overview:
+ * Returns current adapter state
+ *
+ * Returns:
+ * Adapter state per PDQ Port Specification
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * Reads PDQ Port Status register and returns adapter state.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * None
+ *
+ * Side Effects:
+ * None
+ */
+
+static int dfx_hw_adap_state_rd(DFX_board_t *bp)
+ {
+ PI_UINT32 port_status; /* Port Status register value */
+
+ dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+ return (port_status & PI_PSTATUS_M_STATE) >> PI_PSTATUS_V_STATE;
+ }
+
+
+/*
+ * =====================
+ * = dfx_hw_dma_uninit =
+ * =====================
+ *
+ * Overview:
+ * Brings adapter to DMA_UNAVAILABLE state
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bp - pointer to board information
+ * type - type of reset to perform
+ *
+ * Functional Description:
+ * Bring adapter to DMA_UNAVAILABLE state by performing the following:
+ * 1. Set reset type bit in Port Data A Register then reset adapter.
+ * 2. Check that adapter is in DMA_UNAVAILABLE state.
+ *
+ * Return Codes:
+ * DFX_K_SUCCESS - adapter is in DMA_UNAVAILABLE state
+ * DFX_K_HW_TIMEOUT - adapter did not reset properly
+ *
+ * Assumptions:
+ * None
+ *
+ * Side Effects:
+ * Internal adapter registers are cleared.
+ */
+
+static int dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type)
+ {
+ int timeout_cnt; /* used in for loops */
+
+ /* Set reset type bit and reset adapter */
+
+ dfx_hw_adap_reset(bp, type);
+
+ /* Now wait for adapter to enter DMA_UNAVAILABLE state */
+
+ for (timeout_cnt = 100000; timeout_cnt > 0; timeout_cnt--)
+ {
+ if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_DMA_UNAVAIL)
+ break;
+ udelay(100); /* wait for 100 microseconds */
+ }
+ if (timeout_cnt == 0)
+ return DFX_K_HW_TIMEOUT;
+ return DFX_K_SUCCESS;
+ }
+
+/*
+ * Align an sk_buff to a boundary power of 2
+ *
+ */
+#ifdef DYNAMIC_BUFFERS
+static void my_skb_align(struct sk_buff *skb, int n)
+{
+ unsigned long x = (unsigned long)skb->data;
+ unsigned long v;
+
+ v = ALIGN(x, n); /* Where we want to be */
+
+ skb_reserve(skb, v - x);
+}
+#endif
+
+/*
+ * ================
+ * = dfx_rcv_init =
+ * ================
+ *
+ * Overview:
+ * Produces buffers to adapter LLC Host receive descriptor block
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ * get_buffers - non-zero if buffers to be allocated
+ *
+ * Functional Description:
+ * This routine can be called during dfx_adap_init() or during an adapter
+ * reset. It initializes the descriptor block and produces all allocated
+ * LLC Host queue receive buffers.
+ *
+ * Return Codes:
+ * Return 0 on success or -ENOMEM if buffer allocation failed (when using
+ * dynamic buffer allocation). If the buffer allocation failed, the
+ * already allocated buffers will not be released and the caller should do
+ * this.
+ *
+ * Assumptions:
+ * The PDQ has been reset and the adapter and driver maintained Type 2
+ * register indices are cleared.
+ *
+ * Side Effects:
+ * Receive buffers are posted to the adapter LLC queue and the adapter
+ * is notified.
+ */
+
+static int dfx_rcv_init(DFX_board_t *bp, int get_buffers)
+ {
+ int i, j; /* used in for loop */
+
+ /*
+ * Since each receive buffer is a single fragment of same length, initialize
+ * first longword in each receive descriptor for entire LLC Host descriptor
+ * block. Also initialize second longword in each receive descriptor with
+ * physical address of receive buffer. We'll always allocate receive
+ * buffers in powers of 2 so that we can easily fill the 256 entry descriptor
+ * block and produce new receive buffers by simply updating the receive
+ * producer index.
+ *
+ * Assumptions:
+ * To support all shipping versions of PDQ, the receive buffer size
+ * must be mod 128 in length and the physical address must be 128 byte
+ * aligned. In other words, bits 0-6 of the length and address must
+ * be zero for the following descriptor field entries to be correct on
+ * all PDQ-based boards. We guaranteed both requirements during
+ * driver initialization when we allocated memory for the receive buffers.
+ */
+
+ if (get_buffers) {
+#ifdef DYNAMIC_BUFFERS
+ for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
+ for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+ {
+ struct sk_buff *newskb;
+ dma_addr_t dma_addr;
+
+ newskb = __netdev_alloc_skb(bp->dev, NEW_SKB_SIZE,
+ GFP_NOIO);
+ if (!newskb)
+ return -ENOMEM;
+ /*
+ * align to 128 bytes for compatibility with
+ * the old EISA boards.
+ */
+
+ my_skb_align(newskb, 128);
+ dma_addr = dma_map_single(bp->bus_dev,
+ newskb->data,
+ PI_RCV_DATA_K_SIZE_MAX,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(bp->bus_dev, dma_addr)) {
+ dev_kfree_skb(newskb);
+ return -ENOMEM;
+ }
+ bp->descr_block_virt->rcv_data[i + j].long_0 =
+ (u32)(PI_RCV_DESCR_M_SOP |
+ ((PI_RCV_DATA_K_SIZE_MAX /
+ PI_ALIGN_K_RCV_DATA_BUFF) <<
+ PI_RCV_DESCR_V_SEG_LEN));
+ bp->descr_block_virt->rcv_data[i + j].long_1 =
+ (u32)dma_addr;
+
+ /*
+ * p_rcv_buff_va is only used inside the
+ * kernel so we put the skb pointer here.
+ */
+ bp->p_rcv_buff_va[i+j] = (char *) newskb;
+ }
+#else
+ for (i=0; i < (int)(bp->rcv_bufs_to_post); i++)
+ for (j=0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+ {
+ bp->descr_block_virt->rcv_data[i+j].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+ ((PI_RCV_DATA_K_SIZE_MAX / PI_ALIGN_K_RCV_DATA_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+ bp->descr_block_virt->rcv_data[i+j].long_1 = (u32) (bp->rcv_block_phys + (i * PI_RCV_DATA_K_SIZE_MAX));
+ bp->p_rcv_buff_va[i+j] = (bp->rcv_block_virt + (i * PI_RCV_DATA_K_SIZE_MAX));
+ }
+#endif
+ }
+
+ /* Update receive producer and Type 2 register */
+
+ bp->rcv_xmt_reg.index.rcv_prod = bp->rcv_bufs_to_post;
+ dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+ return 0;
+ }
+
+
+/*
+ * =========================
+ * = dfx_rcv_queue_process =
+ * =========================
+ *
+ * Overview:
+ * Process received LLC frames.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * Received LLC frames are processed until there are no more consumed frames.
+ * Once all frames are processed, the receive buffers are returned to the
+ * adapter. Note that this algorithm fixes the length of time that can be spent
+ * in this routine, because there are a fixed number of receive buffers to
+ * process and buffers are not produced until this routine exits and returns
+ * to the ISR.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * None
+ *
+ * Side Effects:
+ * None
+ */
+
+static void dfx_rcv_queue_process(
+ DFX_board_t *bp
+ )
+
+ {
+ PI_TYPE_2_CONSUMER *p_type_2_cons; /* ptr to rcv/xmt consumer block register */
+ char *p_buff; /* ptr to start of packet receive buffer (FMC descriptor) */
+ u32 descr, pkt_len; /* FMC descriptor field and packet length */
+ struct sk_buff *skb = NULL; /* pointer to a sk_buff to hold incoming packet data */
+
+ /* Service all consumed LLC receive frames */
+
+ p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
+ while (bp->rcv_xmt_reg.index.rcv_comp != p_type_2_cons->index.rcv_cons)
+ {
+ /* Process any errors */
+ dma_addr_t dma_addr;
+ int entry;
+
+ entry = bp->rcv_xmt_reg.index.rcv_comp;
+#ifdef DYNAMIC_BUFFERS
+ p_buff = (char *) (((struct sk_buff *)bp->p_rcv_buff_va[entry])->data);
+#else
+ p_buff = bp->p_rcv_buff_va[entry];
+#endif
+ dma_addr = bp->descr_block_virt->rcv_data[entry].long_1;
+ dma_sync_single_for_cpu(bp->bus_dev,
+ dma_addr + RCV_BUFF_K_DESCR,
+ sizeof(u32),
+ DMA_FROM_DEVICE);
+ memcpy(&descr, p_buff + RCV_BUFF_K_DESCR, sizeof(u32));
+
+ if (descr & PI_FMC_DESCR_M_RCC_FLUSH)
+ {
+ if (descr & PI_FMC_DESCR_M_RCC_CRC)
+ bp->rcv_crc_errors++;
+ else
+ bp->rcv_frame_status_errors++;
+ }
+ else
+ {
+ int rx_in_place = 0;
+
+ /* The frame was received without errors - verify packet length */
+
+ pkt_len = (u32)((descr & PI_FMC_DESCR_M_LEN) >> PI_FMC_DESCR_V_LEN);
+ pkt_len -= 4; /* subtract 4 byte CRC */
+ if (!IN_RANGE(pkt_len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
+ bp->rcv_length_errors++;
+ else{
+#ifdef DYNAMIC_BUFFERS
+ struct sk_buff *newskb = NULL;
+
+ if (pkt_len > SKBUFF_RX_COPYBREAK) {
+ dma_addr_t new_dma_addr;
+
+ newskb = netdev_alloc_skb(bp->dev,
+ NEW_SKB_SIZE);
+ if (newskb){
+ my_skb_align(newskb, 128);
+ new_dma_addr = dma_map_single(
+ bp->bus_dev,
+ newskb->data,
+ PI_RCV_DATA_K_SIZE_MAX,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(
+ bp->bus_dev,
+ new_dma_addr)) {
+ dev_kfree_skb(newskb);
+ newskb = NULL;
+ }
+ }
+ if (newskb) {
+ rx_in_place = 1;
+
+ skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
+ dma_unmap_single(bp->bus_dev,
+ dma_addr,
+ PI_RCV_DATA_K_SIZE_MAX,
+ DMA_FROM_DEVICE);
+ skb_reserve(skb, RCV_BUFF_K_PADDING);
+ bp->p_rcv_buff_va[entry] = (char *)newskb;
+ bp->descr_block_virt->rcv_data[entry].long_1 = (u32)new_dma_addr;
+ }
+ }
+ if (!newskb)
+#endif
+ /* Alloc new buffer to pass up,
+ * add room for PRH. */
+ skb = netdev_alloc_skb(bp->dev,
+ pkt_len + 3);
+ if (skb == NULL)
+ {
+ printk("%s: Could not allocate receive buffer. Dropping packet.\n", bp->dev->name);
+ bp->rcv_discards++;
+ break;
+ }
+ else {
+ if (!rx_in_place) {
+ /* Receive buffer allocated, pass receive packet up */
+ dma_sync_single_for_cpu(
+ bp->bus_dev,
+ dma_addr +
+ RCV_BUFF_K_PADDING,
+ pkt_len + 3,
+ DMA_FROM_DEVICE);
+
+ skb_copy_to_linear_data(skb,
+ p_buff + RCV_BUFF_K_PADDING,
+ pkt_len + 3);
+ }
+
+ skb_reserve(skb,3); /* adjust data field so that it points to FC byte */
+ skb_put(skb, pkt_len); /* pass up packet length, NOT including CRC */
+ skb->protocol = fddi_type_trans(skb, bp->dev);
+ bp->rcv_total_bytes += skb->len;
+ netif_rx(skb);
+
+ /* Update the rcv counters */
+ bp->rcv_total_frames++;
+ if (*(p_buff + RCV_BUFF_K_DA) & 0x01)
+ bp->rcv_multicast_frames++;
+ }
+ }
+ }
+
+ /*
+ * Advance the producer (for recycling) and advance the completion
+ * (for servicing received frames). Note that it is okay to
+ * advance the producer without checking that it passes the
+ * completion index because they are both advanced at the same
+ * rate.
+ */
+
+ bp->rcv_xmt_reg.index.rcv_prod += 1;
+ bp->rcv_xmt_reg.index.rcv_comp += 1;
+ }
+ }
+
+
+/*
+ * =====================
+ * = dfx_xmt_queue_pkt =
+ * =====================
+ *
+ * Overview:
+ * Queues packets for transmission
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * skb - pointer to sk_buff to queue for transmission
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * Here we assume that an incoming skb transmit request
+ * is contained in a single physically contiguous buffer
+ * in which the virtual address of the start of packet
+ * (skb->data) can be converted to a physical address
+ * by using pci_map_single().
+ *
+ * Since the adapter architecture requires a three byte
+ * packet request header to prepend the start of packet,
+ * we'll write the three byte field immediately prior to
+ * the FC byte. This assumption is valid because we've
+ * ensured that dev->hard_header_len includes three pad
+ * bytes. By posting a single fragment to the adapter,
+ * we'll reduce the number of descriptor fetches and
+ * bus traffic needed to send the request.
+ *
+ * Also, we can't free the skb until after it's been DMA'd
+ * out by the adapter, so we'll queue it in the driver and
+ * return it in dfx_xmt_done.
+ *
+ * Return Codes:
+ * 0 - driver queued packet, link is unavailable, or skbuff was bad
+ * 1 - caller should requeue the sk_buff for later transmission
+ *
+ * Assumptions:
+ * First and foremost, we assume the incoming skb pointer
+ * is NOT NULL and is pointing to a valid sk_buff structure.
+ *
+ * The outgoing packet is complete, starting with the
+ * frame control byte including the last byte of data,
+ * but NOT including the 4 byte CRC. We'll let the
+ * adapter hardware generate and append the CRC.
+ *
+ * The entire packet is stored in one physically
+ * contiguous buffer which is not cached and whose
+ * 32-bit physical address can be determined.
+ *
+ * It's vital that this routine is NOT reentered for the
+ * same board and that the OS is not in another section of
+ * code (eg. dfx_int_common) for the same board on a
+ * different thread.
+ *
+ * Side Effects:
+ * None
+ */
+
+static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
+ struct net_device *dev)
+ {
+ DFX_board_t *bp = netdev_priv(dev);
+ u8 prod; /* local transmit producer index */
+ PI_XMT_DESCR *p_xmt_descr; /* ptr to transmit descriptor block entry */
+ XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */
+ dma_addr_t dma_addr;
+ unsigned long flags;
+
+ netif_stop_queue(dev);
+
+ /*
+ * Verify that incoming transmit request is OK
+ *
+ * Note: The packet size check is consistent with other
+ * Linux device drivers, although the correct packet
+ * size should be verified before calling the
+ * transmit routine.
+ */
+
+ if (!IN_RANGE(skb->len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
+ {
+ printk("%s: Invalid packet length - %u bytes\n",
+ dev->name, skb->len);
+ bp->xmt_length_errors++; /* bump error counter */
+ netif_wake_queue(dev);
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK; /* return "success" */
+ }
+ /*
+ * See if adapter link is available, if not, free buffer
+ *
+ * Note: If the link isn't available, free buffer and return 0
+ * rather than tell the upper layer to requeue the packet.
+ * The methodology here is that by the time the link
+ * becomes available, the packet to be sent will be
+ * fairly stale. By simply dropping the packet, the
+ * higher layer protocols will eventually time out
+ * waiting for response packets which it won't receive.
+ */
+
+ if (bp->link_available == PI_K_FALSE)
+ {
+ if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_LINK_AVAIL) /* is link really available? */
+ bp->link_available = PI_K_TRUE; /* if so, set flag and continue */
+ else
+ {
+ bp->xmt_discards++; /* bump error counter */
+ dev_kfree_skb(skb); /* free sk_buff now */
+ netif_wake_queue(dev);
+ return NETDEV_TX_OK; /* return "success" */
+ }
+ }
+
+ /* Write the three PRH bytes immediately before the FC byte */
+
+ skb_push(skb, 3);
+ skb->data[0] = DFX_PRH0_BYTE; /* these byte values are defined */
+ skb->data[1] = DFX_PRH1_BYTE; /* in the Motorola FDDI MAC chip */
+ skb->data[2] = DFX_PRH2_BYTE; /* specification */
+
+ dma_addr = dma_map_single(bp->bus_dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(bp->bus_dev, dma_addr)) {
+ skb_pull(skb, 3);
+ return NETDEV_TX_BUSY;
+ }
+
+ spin_lock_irqsave(&bp->lock, flags);
+
+ /* Get the current producer and the next free xmt data descriptor */
+
+ prod = bp->rcv_xmt_reg.index.xmt_prod;
+ p_xmt_descr = &(bp->descr_block_virt->xmt_data[prod]);
+
+ /*
+ * Get pointer to auxiliary queue entry to contain information
+ * for this packet.
+ *
+ * Note: The current xmt producer index will become the
+ * current xmt completion index when we complete this
+ * packet later on. So, we'll get the pointer to the
+ * next auxiliary queue entry now before we bump the
+ * producer index.
+ */
+
+ p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[prod++]); /* also bump producer index */
+
+ /*
+ * Write the descriptor with buffer info and bump producer
+ *
+ * Note: Since we need to start DMA from the packet request
+ * header, we'll add 3 bytes to the DMA buffer length,
+ * and we'll determine the physical address of the
+ * buffer from the PRH, not skb->data.
+ *
+ * Assumptions:
+ * 1. Packet starts with the frame control (FC) byte
+ * at skb->data.
+ * 2. The 4-byte CRC is not appended to the buffer or
+ * included in the length.
+ * 3. Packet length (skb->len) is from FC to end of
+ * data, inclusive.
+ * 4. The packet length does not exceed the maximum
+ * FDDI LLC frame length of 4491 bytes.
+ * 5. The entire packet is contained in a physically
+ * contiguous, non-cached, locked memory space
+ * comprised of a single buffer pointed to by
+ * skb->data.
+ * 6. The physical address of the start of packet
+ * can be determined from the virtual address
+ * by using pci_map_single() and is only 32-bits
+ * wide.
+ */
+
+ p_xmt_descr->long_0 = (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN));
+ p_xmt_descr->long_1 = (u32)dma_addr;
+
+ /*
+ * Verify that descriptor is actually available
+ *
+ * Note: If descriptor isn't available, return 1 which tells
+ * the upper layer to requeue the packet for later
+ * transmission.
+ *
+ * We need to ensure that the producer never reaches the
+ * completion, except to indicate that the queue is empty.
+ */
+
+ if (prod == bp->rcv_xmt_reg.index.xmt_comp)
+ {
+ skb_pull(skb,3);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ return NETDEV_TX_BUSY; /* requeue packet for later */
+ }
+
+ /*
+ * Save info for this packet for xmt done indication routine
+ *
+ * Normally, we'd save the producer index in the p_xmt_drv_descr
+ * structure so that we'd have it handy when we complete this
+ * packet later (in dfx_xmt_done). However, since the current
+ * transmit architecture guarantees a single fragment for the
+ * entire packet, we can simply bump the completion index by
+ * one (1) for each completed packet.
+ *
+ * Note: If this assumption changes and we're presented with
+ * an inconsistent number of transmit fragments for packet
+ * data, we'll need to modify this code to save the current
+ * transmit producer index.
+ */
+
+ p_xmt_drv_descr->p_skb = skb;
+
+ /* Update Type 2 register */
+
+ bp->rcv_xmt_reg.index.xmt_prod = prod;
+ dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ netif_wake_queue(dev);
+ return NETDEV_TX_OK; /* packet queued to adapter */
+ }
+
+
+/*
+ * ================
+ * = dfx_xmt_done =
+ * ================
+ *
+ * Overview:
+ * Processes all frames that have been transmitted.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * For all consumed transmit descriptors that have not
+ * yet been completed, we'll free the skb we were holding
+ * onto using dev_kfree_skb and bump the appropriate
+ * counters.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * The Type 2 register is not updated in this routine. It is
+ * assumed that it will be updated in the ISR when dfx_xmt_done
+ * returns.
+ *
+ * Side Effects:
+ * None
+ */
+
+static int dfx_xmt_done(DFX_board_t *bp)
+ {
+ XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */
+ PI_TYPE_2_CONSUMER *p_type_2_cons; /* ptr to rcv/xmt consumer block register */
+ u8 comp; /* local transmit completion index */
+ int freed = 0; /* buffers freed */
+
+ /* Service all consumed transmit frames */
+
+ p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
+ while (bp->rcv_xmt_reg.index.xmt_comp != p_type_2_cons->index.xmt_cons)
+ {
+ /* Get pointer to the transmit driver descriptor block information */
+
+ p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
+
+ /* Increment transmit counters */
+
+ bp->xmt_total_frames++;
+ bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len;
+
+ /* Return skb to operating system */
+ comp = bp->rcv_xmt_reg.index.xmt_comp;
+ dma_unmap_single(bp->bus_dev,
+ bp->descr_block_virt->xmt_data[comp].long_1,
+ p_xmt_drv_descr->p_skb->len,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_irq(p_xmt_drv_descr->p_skb);
+
+ /*
+ * Move to start of next packet by updating completion index
+ *
+ * Here we assume that a transmit packet request is always
+ * serviced by posting one fragment. We can therefore
+ * simplify the completion code by incrementing the
+ * completion index by one. This code will need to be
+ * modified if this assumption changes. See comments
+ * in dfx_xmt_queue_pkt for more details.
+ */
+
+ bp->rcv_xmt_reg.index.xmt_comp += 1;
+ freed++;
+ }
+ return freed;
+ }
+
+
+/*
+ * =================
+ * = dfx_rcv_flush =
+ * =================
+ *
+ * Overview:
+ * Remove all skb's in the receive ring.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * Free's all the dynamically allocated skb's that are
+ * currently attached to the device receive ring. This
+ * function is typically only used when the device is
+ * initialized or reinitialized.
+ *
+ * Return Codes:
+ * None
+ *
+ * Side Effects:
+ * None
+ */
+#ifdef DYNAMIC_BUFFERS
+static void dfx_rcv_flush( DFX_board_t *bp )
+ {
+ int i, j;
+
+ for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
+ for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+ {
+ struct sk_buff *skb;
+ skb = (struct sk_buff *)bp->p_rcv_buff_va[i+j];
+ if (skb) {
+ dma_unmap_single(bp->bus_dev,
+ bp->descr_block_virt->rcv_data[i+j].long_1,
+ PI_RCV_DATA_K_SIZE_MAX,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(skb);
+ }
+ bp->p_rcv_buff_va[i+j] = NULL;
+ }
+
+ }
+#endif /* DYNAMIC_BUFFERS */
+
+/*
+ * =================
+ * = dfx_xmt_flush =
+ * =================
+ *
+ * Overview:
+ * Processes all frames whether they've been transmitted
+ * or not.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bp - pointer to board information
+ *
+ * Functional Description:
+ * For all produced transmit descriptors that have not
+ * yet been completed, we'll free the skb we were holding
+ * onto using dev_kfree_skb and bump the appropriate
+ * counters. Of course, it's possible that some of
+ * these transmit requests actually did go out, but we
+ * won't make that distinction here. Finally, we'll
+ * update the consumer index to match the producer.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * This routine does NOT update the Type 2 register. It
+ * is assumed that this routine is being called during a
+ * transmit flush interrupt, or a shutdown or close routine.
+ *
+ * Side Effects:
+ * None
+ */
+
+static void dfx_xmt_flush( DFX_board_t *bp )
+ {
+ u32 prod_cons; /* rcv/xmt consumer block longword */
+ XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */
+ u8 comp; /* local transmit completion index */
+
+ /* Flush all outstanding transmit frames */
+
+ while (bp->rcv_xmt_reg.index.xmt_comp != bp->rcv_xmt_reg.index.xmt_prod)
+ {
+ /* Get pointer to the transmit driver descriptor block information */
+
+ p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
+
+ /* Return skb to operating system */
+ comp = bp->rcv_xmt_reg.index.xmt_comp;
+ dma_unmap_single(bp->bus_dev,
+ bp->descr_block_virt->xmt_data[comp].long_1,
+ p_xmt_drv_descr->p_skb->len,
+ DMA_TO_DEVICE);
+ dev_kfree_skb(p_xmt_drv_descr->p_skb);
+
+ /* Increment transmit error counter */
+
+ bp->xmt_discards++;
+
+ /*
+ * Move to start of next packet by updating completion index
+ *
+ * Here we assume that a transmit packet request is always
+ * serviced by posting one fragment. We can therefore
+ * simplify the completion code by incrementing the
+ * completion index by one. This code will need to be
+ * modified if this assumption changes. See comments
+ * in dfx_xmt_queue_pkt for more details.
+ */
+
+ bp->rcv_xmt_reg.index.xmt_comp += 1;
+ }
+
+ /* Update the transmit consumer index in the consumer block */
+
+ prod_cons = (u32)(bp->cons_block_virt->xmt_rcv_data & ~PI_CONS_M_XMT_INDEX);
+ prod_cons |= (u32)(bp->rcv_xmt_reg.index.xmt_prod << PI_CONS_V_XMT_INDEX);
+ bp->cons_block_virt->xmt_rcv_data = prod_cons;
+ }
+
+/*
+ * ==================
+ * = dfx_unregister =
+ * ==================
+ *
+ * Overview:
+ * Shuts down an FDDI controller
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bdev - pointer to device information
+ *
+ * Functional Description:
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * It compiles so it should work :-( (PCI cards do :-)
+ *
+ * Side Effects:
+ * Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ * freed.
+ */
+static void dfx_unregister(struct device *bdev)
+{
+ struct net_device *dev = dev_get_drvdata(bdev);
+ DFX_board_t *bp = netdev_priv(dev);
+ int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ resource_size_t bar_start[3]; /* pointers to ports */
+ resource_size_t bar_len[3]; /* resource lengths */
+ int alloc_size; /* total buffer size used */
+
+ unregister_netdev(dev);
+
+ alloc_size = sizeof(PI_DESCR_BLOCK) +
+ PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+ (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+ sizeof(PI_CONSUMER_BLOCK) +
+ (PI_ALIGN_K_DESC_BLK - 1);
+ if (bp->kmalloced)
+ dma_free_coherent(bdev, alloc_size,
+ bp->kmalloced, bp->kmalloced_dma);
+
+ dfx_bus_uninit(dev);
+
+ dfx_get_bars(bdev, bar_start, bar_len);
+ if (bar_start[2] != 0)
+ release_region(bar_start[2], bar_len[2]);
+ if (bar_start[1] != 0)
+ release_region(bar_start[1], bar_len[1]);
+ if (dfx_use_mmio) {
+ iounmap(bp->base.mem);
+ release_mem_region(bar_start[0], bar_len[0]);
+ } else
+ release_region(bar_start[0], bar_len[0]);
+
+ if (dfx_bus_pci)
+ pci_disable_device(to_pci_dev(bdev));
+
+ free_netdev(dev);
+}
+
+
+static int __maybe_unused dfx_dev_register(struct device *);
+static int __maybe_unused dfx_dev_unregister(struct device *);
+
+#ifdef CONFIG_PCI
+static int dfx_pci_register(struct pci_dev *, const struct pci_device_id *);
+static void dfx_pci_unregister(struct pci_dev *);
+
+static const struct pci_device_id dfx_pci_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI) },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, dfx_pci_table);
+
+static struct pci_driver dfx_pci_driver = {
+ .name = "defxx",
+ .id_table = dfx_pci_table,
+ .probe = dfx_pci_register,
+ .remove = dfx_pci_unregister,
+};
+
+static int dfx_pci_register(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ return dfx_register(&pdev->dev);
+}
+
+static void dfx_pci_unregister(struct pci_dev *pdev)
+{
+ dfx_unregister(&pdev->dev);
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id dfx_eisa_table[] = {
+ { "DEC3001", DEFEA_PROD_ID_1 },
+ { "DEC3002", DEFEA_PROD_ID_2 },
+ { "DEC3003", DEFEA_PROD_ID_3 },
+ { "DEC3004", DEFEA_PROD_ID_4 },
+ { }
+};
+MODULE_DEVICE_TABLE(eisa, dfx_eisa_table);
+
+static struct eisa_driver dfx_eisa_driver = {
+ .id_table = dfx_eisa_table,
+ .driver = {
+ .name = "defxx",
+ .bus = &eisa_bus_type,
+ .probe = dfx_dev_register,
+ .remove = dfx_dev_unregister,
+ },
+};
+#endif /* CONFIG_EISA */
+
+#ifdef CONFIG_TC
+static struct tc_device_id const dfx_tc_table[] = {
+ { "DEC ", "PMAF-FA " },
+ { "DEC ", "PMAF-FD " },
+ { "DEC ", "PMAF-FS " },
+ { "DEC ", "PMAF-FU " },
+ { }
+};
+MODULE_DEVICE_TABLE(tc, dfx_tc_table);
+
+static struct tc_driver dfx_tc_driver = {
+ .id_table = dfx_tc_table,
+ .driver = {
+ .name = "defxx",
+ .bus = &tc_bus_type,
+ .probe = dfx_dev_register,
+ .remove = dfx_dev_unregister,
+ },
+};
+#endif /* CONFIG_TC */
+
+static int __maybe_unused dfx_dev_register(struct device *dev)
+{
+ int status;
+
+ status = dfx_register(dev);
+ if (!status)
+ get_device(dev);
+ return status;
+}
+
+static int __maybe_unused dfx_dev_unregister(struct device *dev)
+{
+ put_device(dev);
+ dfx_unregister(dev);
+ return 0;
+}
+
+
+static int dfx_init(void)
+{
+ int status;
+
+ status = pci_register_driver(&dfx_pci_driver);
+ if (!status)
+ status = eisa_driver_register(&dfx_eisa_driver);
+ if (!status)
+ status = tc_register_driver(&dfx_tc_driver);
+ return status;
+}
+
+static void dfx_cleanup(void)
+{
+ tc_unregister_driver(&dfx_tc_driver);
+ eisa_driver_unregister(&dfx_eisa_driver);
+ pci_unregister_driver(&dfx_pci_driver);
+}
+
+module_init(dfx_init);
+module_exit(dfx_cleanup);
+MODULE_AUTHOR("Lawrence V. Stefani");
+MODULE_DESCRIPTION("DEC FDDIcontroller TC/EISA/PCI (DEFTA/DEFEA/DEFPA) driver "
+ DRV_VERSION " " DRV_RELDATE);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/fddi/defxx.h b/drivers/net/fddi/defxx.h
new file mode 100644
index 000000000..9d30fde2e
--- /dev/null
+++ b/drivers/net/fddi/defxx.h
@@ -0,0 +1,1803 @@
+/*
+ * File Name:
+ * defxx.h
+ *
+ * Copyright Information:
+ * Copyright Digital Equipment Corporation 1996.
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Abstract:
+ * Contains all definitions specified by port specification and required
+ * by the defxx.c driver.
+ *
+ * The original author:
+ * LVS Lawrence V. Stefani <lstefani@yahoo.com>
+ *
+ * Maintainers:
+ * macro Maciej W. Rozycki <macro@linux-mips.org>
+ *
+ * Modification History:
+ * Date Name Description
+ * 16-Aug-96 LVS Created.
+ * 09-Sep-96 LVS Added group_prom field. Moved read/write I/O
+ * macros to DEFXX.C.
+ * 12-Sep-96 LVS Removed packet request header pointers.
+ * 04 Aug 2003 macro Converted to the DMA API.
+ * 23 Oct 2006 macro Big-endian host support.
+ * 14 Dec 2006 macro TURBOchannel support.
+ */
+
+#ifndef _DEFXX_H_
+#define _DEFXX_H_
+
+/* Define basic types for unsigned chars, shorts, longs */
+
+typedef u8 PI_UINT8;
+typedef u16 PI_UINT16;
+typedef u32 PI_UINT32;
+
+/* Define general structures */
+
+typedef struct /* 64-bit counter */
+ {
+ PI_UINT32 ms;
+ PI_UINT32 ls;
+ } PI_CNTR;
+
+typedef struct /* LAN address */
+ {
+ PI_UINT32 lwrd_0;
+ PI_UINT32 lwrd_1;
+ } PI_LAN_ADDR;
+
+typedef struct /* Station ID address */
+ {
+ PI_UINT32 octet_7_4;
+ PI_UINT32 octet_3_0;
+ } PI_STATION_ID;
+
+
+/* Define general constants */
+
+#define PI_ALIGN_K_DESC_BLK 8192 /* Descriptor block boundary */
+#define PI_ALIGN_K_CONS_BLK 64 /* Consumer block boundary */
+#define PI_ALIGN_K_CMD_REQ_BUFF 128 /* Xmt Command que buffer alignment */
+#define PI_ALIGN_K_CMD_RSP_BUFF 128 /* Rcv Command que buffer alignment */
+#define PI_ALIGN_K_UNSOL_BUFF 128 /* Unsol que buffer alignment */
+#define PI_ALIGN_K_XMT_DATA_BUFF 0 /* Xmt data que buffer alignment */
+#define PI_ALIGN_K_RCV_DATA_BUFF 128 /* Rcv que buffer alignment */
+
+/* Define PHY index values */
+
+#define PI_PHY_K_S 0 /* Index to S phy */
+#define PI_PHY_K_A 0 /* Index to A phy */
+#define PI_PHY_K_B 1 /* Index to B phy */
+#define PI_PHY_K_MAX 2 /* Max number of phys */
+
+/* Define FMC descriptor fields */
+
+#define PI_FMC_DESCR_V_SOP 31
+#define PI_FMC_DESCR_V_EOP 30
+#define PI_FMC_DESCR_V_FSC 27
+#define PI_FMC_DESCR_V_FSB_ERROR 26
+#define PI_FMC_DESCR_V_FSB_ADDR_RECOG 25
+#define PI_FMC_DESCR_V_FSB_ADDR_COPIED 24
+#define PI_FMC_DESCR_V_FSB 22
+#define PI_FMC_DESCR_V_RCC_FLUSH 21
+#define PI_FMC_DESCR_V_RCC_CRC 20
+#define PI_FMC_DESCR_V_RCC_RRR 17
+#define PI_FMC_DESCR_V_RCC_DD 15
+#define PI_FMC_DESCR_V_RCC_SS 13
+#define PI_FMC_DESCR_V_RCC 13
+#define PI_FMC_DESCR_V_LEN 0
+
+#define PI_FMC_DESCR_M_SOP 0x80000000
+#define PI_FMC_DESCR_M_EOP 0x40000000
+#define PI_FMC_DESCR_M_FSC 0x38000000
+#define PI_FMC_DESCR_M_FSB_ERROR 0x04000000
+#define PI_FMC_DESCR_M_FSB_ADDR_RECOG 0x02000000
+#define PI_FMC_DESCR_M_FSB_ADDR_COPIED 0x01000000
+#define PI_FMC_DESCR_M_FSB 0x07C00000
+#define PI_FMC_DESCR_M_RCC_FLUSH 0x00200000
+#define PI_FMC_DESCR_M_RCC_CRC 0x00100000
+#define PI_FMC_DESCR_M_RCC_RRR 0x000E0000
+#define PI_FMC_DESCR_M_RCC_DD 0x00018000
+#define PI_FMC_DESCR_M_RCC_SS 0x00006000
+#define PI_FMC_DESCR_M_RCC 0x003FE000
+#define PI_FMC_DESCR_M_LEN 0x00001FFF
+
+#define PI_FMC_DESCR_K_RCC_FMC_INT_ERR 0x01AA
+
+#define PI_FMC_DESCR_K_RRR_SUCCESS 0x00
+#define PI_FMC_DESCR_K_RRR_SA_MATCH 0x01
+#define PI_FMC_DESCR_K_RRR_DA_MATCH 0x02
+#define PI_FMC_DESCR_K_RRR_FMC_ABORT 0x03
+#define PI_FMC_DESCR_K_RRR_LENGTH_BAD 0x04
+#define PI_FMC_DESCR_K_RRR_FRAGMENT 0x05
+#define PI_FMC_DESCR_K_RRR_FORMAT_ERR 0x06
+#define PI_FMC_DESCR_K_RRR_MAC_RESET 0x07
+
+#define PI_FMC_DESCR_K_DD_NO_MATCH 0x0
+#define PI_FMC_DESCR_K_DD_PROMISCUOUS 0x1
+#define PI_FMC_DESCR_K_DD_CAM_MATCH 0x2
+#define PI_FMC_DESCR_K_DD_LOCAL_MATCH 0x3
+
+#define PI_FMC_DESCR_K_SS_NO_MATCH 0x0
+#define PI_FMC_DESCR_K_SS_BRIDGE_MATCH 0x1
+#define PI_FMC_DESCR_K_SS_NOT_POSSIBLE 0x2
+#define PI_FMC_DESCR_K_SS_LOCAL_MATCH 0x3
+
+/* Define some max buffer sizes */
+
+#define PI_CMD_REQ_K_SIZE_MAX 512
+#define PI_CMD_RSP_K_SIZE_MAX 512
+#define PI_UNSOL_K_SIZE_MAX 512
+#define PI_SMT_HOST_K_SIZE_MAX 4608 /* 4 1/2 K */
+#define PI_RCV_DATA_K_SIZE_MAX 4608 /* 4 1/2 K */
+#define PI_XMT_DATA_K_SIZE_MAX 4608 /* 4 1/2 K */
+
+/* Define adapter states */
+
+#define PI_STATE_K_RESET 0
+#define PI_STATE_K_UPGRADE 1
+#define PI_STATE_K_DMA_UNAVAIL 2
+#define PI_STATE_K_DMA_AVAIL 3
+#define PI_STATE_K_LINK_AVAIL 4
+#define PI_STATE_K_LINK_UNAVAIL 5
+#define PI_STATE_K_HALTED 6
+#define PI_STATE_K_RING_MEMBER 7
+#define PI_STATE_K_NUMBER 8
+
+/* Define codes for command type */
+
+#define PI_CMD_K_START 0x00
+#define PI_CMD_K_FILTERS_SET 0x01
+#define PI_CMD_K_FILTERS_GET 0x02
+#define PI_CMD_K_CHARS_SET 0x03
+#define PI_CMD_K_STATUS_CHARS_GET 0x04
+#define PI_CMD_K_CNTRS_GET 0x05
+#define PI_CMD_K_CNTRS_SET 0x06
+#define PI_CMD_K_ADDR_FILTER_SET 0x07
+#define PI_CMD_K_ADDR_FILTER_GET 0x08
+#define PI_CMD_K_ERROR_LOG_CLEAR 0x09
+#define PI_CMD_K_ERROR_LOG_GET 0x0A
+#define PI_CMD_K_FDDI_MIB_GET 0x0B
+#define PI_CMD_K_DEC_EXT_MIB_GET 0x0C
+#define PI_CMD_K_DEVICE_SPECIFIC_GET 0x0D
+#define PI_CMD_K_SNMP_SET 0x0E
+#define PI_CMD_K_UNSOL_TEST 0x0F
+#define PI_CMD_K_SMT_MIB_GET 0x10
+#define PI_CMD_K_SMT_MIB_SET 0x11
+#define PI_CMD_K_MAX 0x11 /* Must match last */
+
+/* Define item codes for Chars_Set and Filters_Set commands */
+
+#define PI_ITEM_K_EOL 0x00 /* End-of-Item list */
+#define PI_ITEM_K_T_REQ 0x01 /* DECnet T_REQ */
+#define PI_ITEM_K_TVX 0x02 /* DECnet TVX */
+#define PI_ITEM_K_RESTRICTED_TOKEN 0x03 /* DECnet Restricted Token */
+#define PI_ITEM_K_LEM_THRESHOLD 0x04 /* DECnet LEM Threshold */
+#define PI_ITEM_K_RING_PURGER 0x05 /* DECnet Ring Purger Enable */
+#define PI_ITEM_K_CNTR_INTERVAL 0x06 /* Chars_Set */
+#define PI_ITEM_K_IND_GROUP_PROM 0x07 /* Filters_Set */
+#define PI_ITEM_K_GROUP_PROM 0x08 /* Filters_Set */
+#define PI_ITEM_K_BROADCAST 0x09 /* Filters_Set */
+#define PI_ITEM_K_SMT_PROM 0x0A /* Filters_Set */
+#define PI_ITEM_K_SMT_USER 0x0B /* Filters_Set */
+#define PI_ITEM_K_RESERVED 0x0C /* Filters_Set */
+#define PI_ITEM_K_IMPLEMENTOR 0x0D /* Filters_Set */
+#define PI_ITEM_K_LOOPBACK_MODE 0x0E /* Chars_Set */
+#define PI_ITEM_K_CONFIG_POLICY 0x10 /* SMTConfigPolicy */
+#define PI_ITEM_K_CON_POLICY 0x11 /* SMTConnectionPolicy */
+#define PI_ITEM_K_T_NOTIFY 0x12 /* SMTTNotify */
+#define PI_ITEM_K_STATION_ACTION 0x13 /* SMTStationAction */
+#define PI_ITEM_K_MAC_PATHS_REQ 0x15 /* MACPathsRequested */
+#define PI_ITEM_K_MAC_ACTION 0x17 /* MACAction */
+#define PI_ITEM_K_CON_POLICIES 0x18 /* PORTConnectionPolicies */
+#define PI_ITEM_K_PORT_PATHS_REQ 0x19 /* PORTPathsRequested */
+#define PI_ITEM_K_MAC_LOOP_TIME 0x1A /* PORTMACLoopTime */
+#define PI_ITEM_K_TB_MAX 0x1B /* PORTTBMax */
+#define PI_ITEM_K_LER_CUTOFF 0x1C /* PORTLerCutoff */
+#define PI_ITEM_K_LER_ALARM 0x1D /* PORTLerAlarm */
+#define PI_ITEM_K_PORT_ACTION 0x1E /* PORTAction */
+#define PI_ITEM_K_FLUSH_TIME 0x20 /* Chars_Set */
+#define PI_ITEM_K_MAC_T_REQ 0x29 /* MACTReq */
+#define PI_ITEM_K_EMAC_RING_PURGER 0x2A /* eMACRingPurgerEnable */
+#define PI_ITEM_K_EMAC_RTOKEN_TIMEOUT 0x2B /* eMACRestrictedTokenTimeout */
+#define PI_ITEM_K_FDX_ENB_DIS 0x2C /* eFDXEnable */
+#define PI_ITEM_K_MAX 0x2C /* Must equal high item */
+
+/* Values for some of the items */
+
+#define PI_K_FALSE 0 /* Generic false */
+#define PI_K_TRUE 1 /* Generic true */
+
+#define PI_SNMP_K_TRUE 1 /* SNMP true/false values */
+#define PI_SNMP_K_FALSE 2
+
+#define PI_FSTATE_K_BLOCK 0 /* Filter State */
+#define PI_FSTATE_K_PASS 1
+
+/* Define command return codes */
+
+#define PI_RSP_K_SUCCESS 0x00
+#define PI_RSP_K_FAILURE 0x01
+#define PI_RSP_K_WARNING 0x02
+#define PI_RSP_K_LOOP_MODE_BAD 0x03
+#define PI_RSP_K_ITEM_CODE_BAD 0x04
+#define PI_RSP_K_TVX_BAD 0x05
+#define PI_RSP_K_TREQ_BAD 0x06
+#define PI_RSP_K_TOKEN_BAD 0x07
+#define PI_RSP_K_NO_EOL 0x0C
+#define PI_RSP_K_FILTER_STATE_BAD 0x0D
+#define PI_RSP_K_CMD_TYPE_BAD 0x0E
+#define PI_RSP_K_ADAPTER_STATE_BAD 0x0F
+#define PI_RSP_K_RING_PURGER_BAD 0x10
+#define PI_RSP_K_LEM_THRESHOLD_BAD 0x11
+#define PI_RSP_K_LOOP_NOT_SUPPORTED 0x12
+#define PI_RSP_K_FLUSH_TIME_BAD 0x13
+#define PI_RSP_K_NOT_IMPLEMENTED 0x14
+#define PI_RSP_K_CONFIG_POLICY_BAD 0x15
+#define PI_RSP_K_STATION_ACTION_BAD 0x16
+#define PI_RSP_K_MAC_ACTION_BAD 0x17
+#define PI_RSP_K_CON_POLICIES_BAD 0x18
+#define PI_RSP_K_MAC_LOOP_TIME_BAD 0x19
+#define PI_RSP_K_TB_MAX_BAD 0x1A
+#define PI_RSP_K_LER_CUTOFF_BAD 0x1B
+#define PI_RSP_K_LER_ALARM_BAD 0x1C
+#define PI_RSP_K_MAC_PATHS_REQ_BAD 0x1D
+#define PI_RSP_K_MAC_T_REQ_BAD 0x1E
+#define PI_RSP_K_EMAC_RING_PURGER_BAD 0x1F
+#define PI_RSP_K_EMAC_RTOKEN_TIME_BAD 0x20
+#define PI_RSP_K_NO_SUCH_ENTRY 0x21
+#define PI_RSP_K_T_NOTIFY_BAD 0x22
+#define PI_RSP_K_TR_MAX_EXP_BAD 0x23
+#define PI_RSP_K_MAC_FRM_ERR_THR_BAD 0x24
+#define PI_RSP_K_MAX_T_REQ_BAD 0x25
+#define PI_RSP_K_FDX_ENB_DIS_BAD 0x26
+#define PI_RSP_K_ITEM_INDEX_BAD 0x27
+#define PI_RSP_K_PORT_ACTION_BAD 0x28
+
+/* Commonly used structures */
+
+typedef struct /* Item list */
+ {
+ PI_UINT32 item_code;
+ PI_UINT32 value;
+ } PI_ITEM_LIST;
+
+typedef struct /* Response header */
+ {
+ PI_UINT32 reserved;
+ PI_UINT32 cmd_type;
+ PI_UINT32 status;
+ } PI_RSP_HEADER;
+
+
+/* Start Command */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_START_REQ;
+
+/* Start Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_START_RSP;
+
+/* Filters_Set Request */
+
+#define PI_CMD_FILTERS_SET_K_ITEMS_MAX 63 /* Fits in a 512 byte buffer */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ PI_ITEM_LIST item[PI_CMD_FILTERS_SET_K_ITEMS_MAX];
+ } PI_CMD_FILTERS_SET_REQ;
+
+/* Filters_Set Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_FILTERS_SET_RSP;
+
+/* Filters_Get Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_FILTERS_GET_REQ;
+
+/* Filters_Get Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ PI_UINT32 ind_group_prom;
+ PI_UINT32 group_prom;
+ PI_UINT32 broadcast_all;
+ PI_UINT32 smt_all;
+ PI_UINT32 smt_user;
+ PI_UINT32 reserved_all;
+ PI_UINT32 implementor_all;
+ } PI_CMD_FILTERS_GET_RSP;
+
+
+/* Chars_Set Request */
+
+#define PI_CMD_CHARS_SET_K_ITEMS_MAX 42 /* Fits in a 512 byte buffer */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ struct /* Item list */
+ {
+ PI_UINT32 item_code;
+ PI_UINT32 value;
+ PI_UINT32 item_index;
+ } item[PI_CMD_CHARS_SET_K_ITEMS_MAX];
+ } PI_CMD_CHARS_SET_REQ;
+
+/* Chars_Set Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_CHARS_SET_RSP;
+
+
+/* SNMP_Set Request */
+
+#define PI_CMD_SNMP_SET_K_ITEMS_MAX 42 /* Fits in a 512 byte buffer */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ struct /* Item list */
+ {
+ PI_UINT32 item_code;
+ PI_UINT32 value;
+ PI_UINT32 item_index;
+ } item[PI_CMD_SNMP_SET_K_ITEMS_MAX];
+ } PI_CMD_SNMP_SET_REQ;
+
+/* SNMP_Set Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_SNMP_SET_RSP;
+
+
+/* SMT_MIB_Set Request */
+
+#define PI_CMD_SMT_MIB_SET_K_ITEMS_MAX 42 /* Max number of items */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ struct
+ {
+ PI_UINT32 item_code;
+ PI_UINT32 value;
+ PI_UINT32 item_index;
+ } item[PI_CMD_SMT_MIB_SET_K_ITEMS_MAX];
+ } PI_CMD_SMT_MIB_SET_REQ;
+
+/* SMT_MIB_Set Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_SMT_MIB_SET_RSP;
+
+/* SMT_MIB_Get Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_SMT_MIB_GET_REQ;
+
+/* SMT_MIB_Get Response */
+
+typedef struct /* Refer to ANSI FDDI SMT Rev. 7.3 */
+ {
+ PI_RSP_HEADER header;
+
+ /* SMT GROUP */
+
+ PI_STATION_ID smt_station_id;
+ PI_UINT32 smt_op_version_id;
+ PI_UINT32 smt_hi_version_id;
+ PI_UINT32 smt_lo_version_id;
+ PI_UINT32 smt_user_data[8];
+ PI_UINT32 smt_mib_version_id;
+ PI_UINT32 smt_mac_ct;
+ PI_UINT32 smt_non_master_ct;
+ PI_UINT32 smt_master_ct;
+ PI_UINT32 smt_available_paths;
+ PI_UINT32 smt_config_capabilities;
+ PI_UINT32 smt_config_policy;
+ PI_UINT32 smt_connection_policy;
+ PI_UINT32 smt_t_notify;
+ PI_UINT32 smt_stat_rpt_policy;
+ PI_UINT32 smt_trace_max_expiration;
+ PI_UINT32 smt_bypass_present;
+ PI_UINT32 smt_ecm_state;
+ PI_UINT32 smt_cf_state;
+ PI_UINT32 smt_remote_disconnect_flag;
+ PI_UINT32 smt_station_status;
+ PI_UINT32 smt_peer_wrap_flag;
+ PI_CNTR smt_msg_time_stamp;
+ PI_CNTR smt_transition_time_stamp;
+
+ /* MAC GROUP */
+
+ PI_UINT32 mac_frame_status_functions;
+ PI_UINT32 mac_t_max_capability;
+ PI_UINT32 mac_tvx_capability;
+ PI_UINT32 mac_available_paths;
+ PI_UINT32 mac_current_path;
+ PI_LAN_ADDR mac_upstream_nbr;
+ PI_LAN_ADDR mac_downstream_nbr;
+ PI_LAN_ADDR mac_old_upstream_nbr;
+ PI_LAN_ADDR mac_old_downstream_nbr;
+ PI_UINT32 mac_dup_address_test;
+ PI_UINT32 mac_requested_paths;
+ PI_UINT32 mac_downstream_port_type;
+ PI_LAN_ADDR mac_smt_address;
+ PI_UINT32 mac_t_req;
+ PI_UINT32 mac_t_neg;
+ PI_UINT32 mac_t_max;
+ PI_UINT32 mac_tvx_value;
+ PI_UINT32 mac_frame_error_threshold;
+ PI_UINT32 mac_frame_error_ratio;
+ PI_UINT32 mac_rmt_state;
+ PI_UINT32 mac_da_flag;
+ PI_UINT32 mac_unda_flag;
+ PI_UINT32 mac_frame_error_flag;
+ PI_UINT32 mac_ma_unitdata_available;
+ PI_UINT32 mac_hardware_present;
+ PI_UINT32 mac_ma_unitdata_enable;
+
+ /* PATH GROUP */
+
+ PI_UINT32 path_configuration[8];
+ PI_UINT32 path_tvx_lower_bound;
+ PI_UINT32 path_t_max_lower_bound;
+ PI_UINT32 path_max_t_req;
+
+ /* PORT GROUP */
+
+ PI_UINT32 port_my_type[PI_PHY_K_MAX];
+ PI_UINT32 port_neighbor_type[PI_PHY_K_MAX];
+ PI_UINT32 port_connection_policies[PI_PHY_K_MAX];
+ PI_UINT32 port_mac_indicated[PI_PHY_K_MAX];
+ PI_UINT32 port_current_path[PI_PHY_K_MAX];
+ PI_UINT32 port_requested_paths[PI_PHY_K_MAX];
+ PI_UINT32 port_mac_placement[PI_PHY_K_MAX];
+ PI_UINT32 port_available_paths[PI_PHY_K_MAX];
+ PI_UINT32 port_pmd_class[PI_PHY_K_MAX];
+ PI_UINT32 port_connection_capabilities[PI_PHY_K_MAX];
+ PI_UINT32 port_bs_flag[PI_PHY_K_MAX];
+ PI_UINT32 port_ler_estimate[PI_PHY_K_MAX];
+ PI_UINT32 port_ler_cutoff[PI_PHY_K_MAX];
+ PI_UINT32 port_ler_alarm[PI_PHY_K_MAX];
+ PI_UINT32 port_connect_state[PI_PHY_K_MAX];
+ PI_UINT32 port_pcm_state[PI_PHY_K_MAX];
+ PI_UINT32 port_pc_withhold[PI_PHY_K_MAX];
+ PI_UINT32 port_ler_flag[PI_PHY_K_MAX];
+ PI_UINT32 port_hardware_present[PI_PHY_K_MAX];
+
+ /* GROUP for things that were added later, so must be at the end. */
+
+ PI_CNTR path_ring_latency;
+
+ } PI_CMD_SMT_MIB_GET_RSP;
+
+
+/*
+ * Item and group code definitions for SMT 7.3 mandatory objects. These
+ * definitions are to be used as appropriate in SMT_MIB_SET commands and
+ * certain host-sent SMT frames such as PMF Get and Set requests. The
+ * codes have been taken from the MIB summary section of ANSI SMT 7.3.
+ */
+
+#define PI_GRP_K_SMT_STATION_ID 0x100A
+#define PI_ITEM_K_SMT_STATION_ID 0x100B
+#define PI_ITEM_K_SMT_OP_VERS_ID 0x100D
+#define PI_ITEM_K_SMT_HI_VERS_ID 0x100E
+#define PI_ITEM_K_SMT_LO_VERS_ID 0x100F
+#define PI_ITEM_K_SMT_USER_DATA 0x1011
+#define PI_ITEM_K_SMT_MIB_VERS_ID 0x1012
+
+#define PI_GRP_K_SMT_STATION_CONFIG 0x1014
+#define PI_ITEM_K_SMT_MAC_CT 0x1015
+#define PI_ITEM_K_SMT_NON_MASTER_CT 0x1016
+#define PI_ITEM_K_SMT_MASTER_CT 0x1017
+#define PI_ITEM_K_SMT_AVAIL_PATHS 0x1018
+#define PI_ITEM_K_SMT_CONFIG_CAPS 0x1019
+#define PI_ITEM_K_SMT_CONFIG_POL 0x101A
+#define PI_ITEM_K_SMT_CONN_POL 0x101B
+#define PI_ITEM_K_SMT_T_NOTIFY 0x101D
+#define PI_ITEM_K_SMT_STAT_POL 0x101E
+#define PI_ITEM_K_SMT_TR_MAX_EXP 0x101F
+#define PI_ITEM_K_SMT_PORT_INDEXES 0x1020
+#define PI_ITEM_K_SMT_MAC_INDEXES 0x1021
+#define PI_ITEM_K_SMT_BYPASS_PRESENT 0x1022
+
+#define PI_GRP_K_SMT_STATUS 0x1028
+#define PI_ITEM_K_SMT_ECM_STATE 0x1029
+#define PI_ITEM_K_SMT_CF_STATE 0x102A
+#define PI_ITEM_K_SMT_REM_DISC_FLAG 0x102C
+#define PI_ITEM_K_SMT_STATION_STATUS 0x102D
+#define PI_ITEM_K_SMT_PEER_WRAP_FLAG 0x102E
+
+#define PI_GRP_K_SMT_MIB_OPERATION 0x1032
+#define PI_ITEM_K_SMT_MSG_TIME_STAMP 0x1033
+#define PI_ITEM_K_SMT_TRN_TIME_STAMP 0x1034
+
+#define PI_ITEM_K_SMT_STATION_ACT 0x103C
+
+#define PI_GRP_K_MAC_CAPABILITIES 0x200A
+#define PI_ITEM_K_MAC_FRM_STAT_FUNC 0x200B
+#define PI_ITEM_K_MAC_T_MAX_CAP 0x200D
+#define PI_ITEM_K_MAC_TVX_CAP 0x200E
+
+#define PI_GRP_K_MAC_CONFIG 0x2014
+#define PI_ITEM_K_MAC_AVAIL_PATHS 0x2016
+#define PI_ITEM_K_MAC_CURRENT_PATH 0x2017
+#define PI_ITEM_K_MAC_UP_NBR 0x2018
+#define PI_ITEM_K_MAC_DOWN_NBR 0x2019
+#define PI_ITEM_K_MAC_OLD_UP_NBR 0x201A
+#define PI_ITEM_K_MAC_OLD_DOWN_NBR 0x201B
+#define PI_ITEM_K_MAC_DUP_ADDR_TEST 0x201D
+#define PI_ITEM_K_MAC_REQ_PATHS 0x2020
+#define PI_ITEM_K_MAC_DOWN_PORT_TYPE 0x2021
+#define PI_ITEM_K_MAC_INDEX 0x2022
+
+#define PI_GRP_K_MAC_ADDRESS 0x2028
+#define PI_ITEM_K_MAC_SMT_ADDRESS 0x2029
+
+#define PI_GRP_K_MAC_OPERATION 0x2032
+#define PI_ITEM_K_MAC_TREQ 0x2033
+#define PI_ITEM_K_MAC_TNEG 0x2034
+#define PI_ITEM_K_MAC_TMAX 0x2035
+#define PI_ITEM_K_MAC_TVX_VALUE 0x2036
+
+#define PI_GRP_K_MAC_COUNTERS 0x2046
+#define PI_ITEM_K_MAC_FRAME_CT 0x2047
+#define PI_ITEM_K_MAC_COPIED_CT 0x2048
+#define PI_ITEM_K_MAC_TRANSMIT_CT 0x2049
+#define PI_ITEM_K_MAC_ERROR_CT 0x2051
+#define PI_ITEM_K_MAC_LOST_CT 0x2052
+
+#define PI_GRP_K_MAC_FRM_ERR_COND 0x205A
+#define PI_ITEM_K_MAC_FRM_ERR_THR 0x205F
+#define PI_ITEM_K_MAC_FRM_ERR_RAT 0x2060
+
+#define PI_GRP_K_MAC_STATUS 0x206E
+#define PI_ITEM_K_MAC_RMT_STATE 0x206F
+#define PI_ITEM_K_MAC_DA_FLAG 0x2070
+#define PI_ITEM_K_MAC_UNDA_FLAG 0x2071
+#define PI_ITEM_K_MAC_FRM_ERR_FLAG 0x2072
+#define PI_ITEM_K_MAC_MA_UNIT_AVAIL 0x2074
+#define PI_ITEM_K_MAC_HW_PRESENT 0x2075
+#define PI_ITEM_K_MAC_MA_UNIT_ENAB 0x2076
+
+#define PI_GRP_K_PATH_CONFIG 0x320A
+#define PI_ITEM_K_PATH_INDEX 0x320B
+#define PI_ITEM_K_PATH_CONFIGURATION 0x3212
+#define PI_ITEM_K_PATH_TVX_LB 0x3215
+#define PI_ITEM_K_PATH_T_MAX_LB 0x3216
+#define PI_ITEM_K_PATH_MAX_T_REQ 0x3217
+
+#define PI_GRP_K_PORT_CONFIG 0x400A
+#define PI_ITEM_K_PORT_MY_TYPE 0x400C
+#define PI_ITEM_K_PORT_NBR_TYPE 0x400D
+#define PI_ITEM_K_PORT_CONN_POLS 0x400E
+#define PI_ITEM_K_PORT_MAC_INDICATED 0x400F
+#define PI_ITEM_K_PORT_CURRENT_PATH 0x4010
+#define PI_ITEM_K_PORT_REQ_PATHS 0x4011
+#define PI_ITEM_K_PORT_MAC_PLACEMENT 0x4012
+#define PI_ITEM_K_PORT_AVAIL_PATHS 0x4013
+#define PI_ITEM_K_PORT_PMD_CLASS 0x4016
+#define PI_ITEM_K_PORT_CONN_CAPS 0x4017
+#define PI_ITEM_K_PORT_INDEX 0x401D
+
+#define PI_GRP_K_PORT_OPERATION 0x401E
+#define PI_ITEM_K_PORT_BS_FLAG 0x4021
+
+#define PI_GRP_K_PORT_ERR_CNTRS 0x4028
+#define PI_ITEM_K_PORT_LCT_FAIL_CT 0x402A
+
+#define PI_GRP_K_PORT_LER 0x4032
+#define PI_ITEM_K_PORT_LER_ESTIMATE 0x4033
+#define PI_ITEM_K_PORT_LEM_REJ_CT 0x4034
+#define PI_ITEM_K_PORT_LEM_CT 0x4035
+#define PI_ITEM_K_PORT_LER_CUTOFF 0x403A
+#define PI_ITEM_K_PORT_LER_ALARM 0x403B
+
+#define PI_GRP_K_PORT_STATUS 0x403C
+#define PI_ITEM_K_PORT_CONNECT_STATE 0x403D
+#define PI_ITEM_K_PORT_PCM_STATE 0x403E
+#define PI_ITEM_K_PORT_PC_WITHHOLD 0x403F
+#define PI_ITEM_K_PORT_LER_FLAG 0x4040
+#define PI_ITEM_K_PORT_HW_PRESENT 0x4041
+
+#define PI_ITEM_K_PORT_ACT 0x4046
+
+/* Addr_Filter_Set Request */
+
+#define PI_CMD_ADDR_FILTER_K_SIZE 62
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ PI_LAN_ADDR entry[PI_CMD_ADDR_FILTER_K_SIZE];
+ } PI_CMD_ADDR_FILTER_SET_REQ;
+
+/* Addr_Filter_Set Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_ADDR_FILTER_SET_RSP;
+
+/* Addr_Filter_Get Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_ADDR_FILTER_GET_REQ;
+
+/* Addr_Filter_Get Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ PI_LAN_ADDR entry[PI_CMD_ADDR_FILTER_K_SIZE];
+ } PI_CMD_ADDR_FILTER_GET_RSP;
+
+/* Status_Chars_Get Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_STATUS_CHARS_GET_REQ;
+
+/* Status_Chars_Get Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ PI_STATION_ID station_id; /* Station */
+ PI_UINT32 station_type;
+ PI_UINT32 smt_ver_id;
+ PI_UINT32 smt_ver_id_max;
+ PI_UINT32 smt_ver_id_min;
+ PI_UINT32 station_state;
+ PI_LAN_ADDR link_addr; /* Link */
+ PI_UINT32 t_req;
+ PI_UINT32 tvx;
+ PI_UINT32 token_timeout;
+ PI_UINT32 purger_enb;
+ PI_UINT32 link_state;
+ PI_UINT32 tneg;
+ PI_UINT32 dup_addr_flag;
+ PI_LAN_ADDR una;
+ PI_LAN_ADDR una_old;
+ PI_UINT32 un_dup_addr_flag;
+ PI_LAN_ADDR dna;
+ PI_LAN_ADDR dna_old;
+ PI_UINT32 purger_state;
+ PI_UINT32 fci_mode;
+ PI_UINT32 error_reason;
+ PI_UINT32 loopback;
+ PI_UINT32 ring_latency;
+ PI_LAN_ADDR last_dir_beacon_sa;
+ PI_LAN_ADDR last_dir_beacon_una;
+ PI_UINT32 phy_type[PI_PHY_K_MAX]; /* Phy */
+ PI_UINT32 pmd_type[PI_PHY_K_MAX];
+ PI_UINT32 lem_threshold[PI_PHY_K_MAX];
+ PI_UINT32 phy_state[PI_PHY_K_MAX];
+ PI_UINT32 nbor_phy_type[PI_PHY_K_MAX];
+ PI_UINT32 link_error_est[PI_PHY_K_MAX];
+ PI_UINT32 broken_reason[PI_PHY_K_MAX];
+ PI_UINT32 reject_reason[PI_PHY_K_MAX];
+ PI_UINT32 cntr_interval; /* Miscellaneous */
+ PI_UINT32 module_rev;
+ PI_UINT32 firmware_rev;
+ PI_UINT32 mop_device_type;
+ PI_UINT32 phy_led[PI_PHY_K_MAX];
+ PI_UINT32 flush_time;
+ } PI_CMD_STATUS_CHARS_GET_RSP;
+
+/* FDDI_MIB_Get Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_FDDI_MIB_GET_REQ;
+
+/* FDDI_MIB_Get Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+
+ /* SMT GROUP */
+
+ PI_STATION_ID smt_station_id;
+ PI_UINT32 smt_op_version_id;
+ PI_UINT32 smt_hi_version_id;
+ PI_UINT32 smt_lo_version_id;
+ PI_UINT32 smt_mac_ct;
+ PI_UINT32 smt_non_master_ct;
+ PI_UINT32 smt_master_ct;
+ PI_UINT32 smt_paths_available;
+ PI_UINT32 smt_config_capabilities;
+ PI_UINT32 smt_config_policy;
+ PI_UINT32 smt_connection_policy;
+ PI_UINT32 smt_t_notify;
+ PI_UINT32 smt_status_reporting;
+ PI_UINT32 smt_ecm_state;
+ PI_UINT32 smt_cf_state;
+ PI_UINT32 smt_hold_state;
+ PI_UINT32 smt_remote_disconnect_flag;
+ PI_UINT32 smt_station_action;
+
+ /* MAC GROUP */
+
+ PI_UINT32 mac_frame_status_capabilities;
+ PI_UINT32 mac_t_max_greatest_lower_bound;
+ PI_UINT32 mac_tvx_greatest_lower_bound;
+ PI_UINT32 mac_paths_available;
+ PI_UINT32 mac_current_path;
+ PI_LAN_ADDR mac_upstream_nbr;
+ PI_LAN_ADDR mac_old_upstream_nbr;
+ PI_UINT32 mac_dup_addr_test;
+ PI_UINT32 mac_paths_requested;
+ PI_UINT32 mac_downstream_port_type;
+ PI_LAN_ADDR mac_smt_address;
+ PI_UINT32 mac_t_req;
+ PI_UINT32 mac_t_neg;
+ PI_UINT32 mac_t_max;
+ PI_UINT32 mac_tvx_value;
+ PI_UINT32 mac_t_min;
+ PI_UINT32 mac_current_frame_status;
+ /* mac_frame_cts */
+ /* mac_error_cts */
+ /* mac_lost_cts */
+ PI_UINT32 mac_frame_error_threshold;
+ PI_UINT32 mac_frame_error_ratio;
+ PI_UINT32 mac_rmt_state;
+ PI_UINT32 mac_da_flag;
+ PI_UINT32 mac_una_da_flag;
+ PI_UINT32 mac_frame_condition;
+ PI_UINT32 mac_chip_set;
+ PI_UINT32 mac_action;
+
+ /* PATH GROUP => Does not need to be implemented */
+
+ /* PORT GROUP */
+
+ PI_UINT32 port_pc_type[PI_PHY_K_MAX];
+ PI_UINT32 port_pc_neighbor[PI_PHY_K_MAX];
+ PI_UINT32 port_connection_policies[PI_PHY_K_MAX];
+ PI_UINT32 port_remote_mac_indicated[PI_PHY_K_MAX];
+ PI_UINT32 port_ce_state[PI_PHY_K_MAX];
+ PI_UINT32 port_paths_requested[PI_PHY_K_MAX];
+ PI_UINT32 port_mac_placement[PI_PHY_K_MAX];
+ PI_UINT32 port_available_paths[PI_PHY_K_MAX];
+ PI_UINT32 port_mac_loop_time[PI_PHY_K_MAX];
+ PI_UINT32 port_tb_max[PI_PHY_K_MAX];
+ PI_UINT32 port_bs_flag[PI_PHY_K_MAX];
+ /* port_lct_fail_cts[PI_PHY_K_MAX]; */
+ PI_UINT32 port_ler_estimate[PI_PHY_K_MAX];
+ /* port_lem_reject_cts[PI_PHY_K_MAX]; */
+ /* port_lem_cts[PI_PHY_K_MAX]; */
+ PI_UINT32 port_ler_cutoff[PI_PHY_K_MAX];
+ PI_UINT32 port_ler_alarm[PI_PHY_K_MAX];
+ PI_UINT32 port_connect_state[PI_PHY_K_MAX];
+ PI_UINT32 port_pcm_state[PI_PHY_K_MAX];
+ PI_UINT32 port_pc_withhold[PI_PHY_K_MAX];
+ PI_UINT32 port_ler_condition[PI_PHY_K_MAX];
+ PI_UINT32 port_chip_set[PI_PHY_K_MAX];
+ PI_UINT32 port_action[PI_PHY_K_MAX];
+
+ /* ATTACHMENT GROUP */
+
+ PI_UINT32 attachment_class;
+ PI_UINT32 attachment_ob_present;
+ PI_UINT32 attachment_imax_expiration;
+ PI_UINT32 attachment_inserted_status;
+ PI_UINT32 attachment_insert_policy;
+
+ /* CHIP SET GROUP => Does not need to be implemented */
+
+ } PI_CMD_FDDI_MIB_GET_RSP;
+
+/* DEC_Ext_MIB_Get Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_DEC_EXT_MIB_GET_REQ;
+
+/* DEC_Ext_MIB_Get (efddi and efdx groups only) Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+
+ /* SMT GROUP */
+
+ PI_UINT32 esmt_station_type;
+
+ /* MAC GROUP */
+
+ PI_UINT32 emac_link_state;
+ PI_UINT32 emac_ring_purger_state;
+ PI_UINT32 emac_ring_purger_enable;
+ PI_UINT32 emac_frame_strip_mode;
+ PI_UINT32 emac_ring_error_reason;
+ PI_UINT32 emac_up_nbr_dup_addr_flag;
+ PI_UINT32 emac_restricted_token_timeout;
+
+ /* PORT GROUP */
+
+ PI_UINT32 eport_pmd_type[PI_PHY_K_MAX];
+ PI_UINT32 eport_phy_state[PI_PHY_K_MAX];
+ PI_UINT32 eport_reject_reason[PI_PHY_K_MAX];
+
+ /* FDX (Full-Duplex) GROUP */
+
+ PI_UINT32 efdx_enable; /* Valid only in SMT 7.3 */
+ PI_UINT32 efdx_op; /* Valid only in SMT 7.3 */
+ PI_UINT32 efdx_state; /* Valid only in SMT 7.3 */
+
+ } PI_CMD_DEC_EXT_MIB_GET_RSP;
+
+typedef struct
+ {
+ PI_CNTR traces_rcvd; /* Station */
+ PI_CNTR frame_cnt; /* Link */
+ PI_CNTR error_cnt;
+ PI_CNTR lost_cnt;
+ PI_CNTR octets_rcvd;
+ PI_CNTR octets_sent;
+ PI_CNTR pdus_rcvd;
+ PI_CNTR pdus_sent;
+ PI_CNTR mcast_octets_rcvd;
+ PI_CNTR mcast_octets_sent;
+ PI_CNTR mcast_pdus_rcvd;
+ PI_CNTR mcast_pdus_sent;
+ PI_CNTR xmt_underruns;
+ PI_CNTR xmt_failures;
+ PI_CNTR block_check_errors;
+ PI_CNTR frame_status_errors;
+ PI_CNTR pdu_length_errors;
+ PI_CNTR rcv_overruns;
+ PI_CNTR user_buff_unavailable;
+ PI_CNTR inits_initiated;
+ PI_CNTR inits_rcvd;
+ PI_CNTR beacons_initiated;
+ PI_CNTR dup_addrs;
+ PI_CNTR dup_tokens;
+ PI_CNTR purge_errors;
+ PI_CNTR fci_strip_errors;
+ PI_CNTR traces_initiated;
+ PI_CNTR directed_beacons_rcvd;
+ PI_CNTR emac_frame_alignment_errors;
+ PI_CNTR ebuff_errors[PI_PHY_K_MAX]; /* Phy */
+ PI_CNTR lct_rejects[PI_PHY_K_MAX];
+ PI_CNTR lem_rejects[PI_PHY_K_MAX];
+ PI_CNTR link_errors[PI_PHY_K_MAX];
+ PI_CNTR connections[PI_PHY_K_MAX];
+ PI_CNTR copied_cnt; /* Valid only if using SMT 7.3 */
+ PI_CNTR transmit_cnt; /* Valid only if using SMT 7.3 */
+ PI_CNTR tokens;
+ } PI_CNTR_BLK;
+
+/* Counters_Get Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_CNTRS_GET_REQ;
+
+/* Counters_Get Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ PI_CNTR time_since_reset;
+ PI_CNTR_BLK cntrs;
+ } PI_CMD_CNTRS_GET_RSP;
+
+/* Counters_Set Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ PI_CNTR_BLK cntrs;
+ } PI_CMD_CNTRS_SET_REQ;
+
+/* Counters_Set Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_CNTRS_SET_RSP;
+
+/* Error_Log_Clear Request */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ } PI_CMD_ERROR_LOG_CLEAR_REQ;
+
+/* Error_Log_Clear Response */
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ } PI_CMD_ERROR_LOG_CLEAR_RSP;
+
+/* Error_Log_Get Request */
+
+#define PI_LOG_ENTRY_K_INDEX_MIN 0 /* Minimum index for entry */
+
+typedef struct
+ {
+ PI_UINT32 cmd_type;
+ PI_UINT32 entry_index;
+ } PI_CMD_ERROR_LOG_GET_REQ;
+
+/* Error_Log_Get Response */
+
+#define PI_K_LOG_FW_SIZE 111 /* Max number of fw longwords */
+#define PI_K_LOG_DIAG_SIZE 6 /* Max number of diag longwords */
+
+typedef struct
+ {
+ struct
+ {
+ PI_UINT32 fru_imp_mask;
+ PI_UINT32 test_id;
+ PI_UINT32 reserved[PI_K_LOG_DIAG_SIZE];
+ } diag;
+ PI_UINT32 fw[PI_K_LOG_FW_SIZE];
+ } PI_LOG_ENTRY;
+
+typedef struct
+ {
+ PI_RSP_HEADER header;
+ PI_UINT32 event_status;
+ PI_UINT32 caller_id;
+ PI_UINT32 timestamp_l;
+ PI_UINT32 timestamp_h;
+ PI_UINT32 write_count;
+ PI_LOG_ENTRY entry_info;
+ } PI_CMD_ERROR_LOG_GET_RSP;
+
+/* Define error log related constants and types. */
+/* Not all of the caller id's can occur. The only ones currently */
+/* implemented are: none, selftest, mfg, fw, console */
+
+#define PI_LOG_EVENT_STATUS_K_VALID 0 /* Valid Event Status */
+#define PI_LOG_EVENT_STATUS_K_INVALID 1 /* Invalid Event Status */
+#define PI_LOG_CALLER_ID_K_NONE 0 /* No caller */
+#define PI_LOG_CALLER_ID_K_SELFTEST 1 /* Normal power-up selftest */
+#define PI_LOG_CALLER_ID_K_MFG 2 /* Mfg power-up selftest */
+#define PI_LOG_CALLER_ID_K_ONLINE 3 /* On-line diagnostics */
+#define PI_LOG_CALLER_ID_K_HW 4 /* Hardware */
+#define PI_LOG_CALLER_ID_K_FW 5 /* Firmware */
+#define PI_LOG_CALLER_ID_K_CNS_HW 6 /* CNS firmware */
+#define PI_LOG_CALLER_ID_K_CNS_FW 7 /* CNS hardware */
+#define PI_LOG_CALLER_ID_K_CONSOLE 8 /* Console Caller Id */
+
+/*
+ * Place all DMA commands in the following request and response structures
+ * to simplify code.
+ */
+
+typedef union
+ {
+ PI_UINT32 cmd_type;
+ PI_CMD_START_REQ start;
+ PI_CMD_FILTERS_SET_REQ filter_set;
+ PI_CMD_FILTERS_GET_REQ filter_get;
+ PI_CMD_CHARS_SET_REQ char_set;
+ PI_CMD_ADDR_FILTER_SET_REQ addr_filter_set;
+ PI_CMD_ADDR_FILTER_GET_REQ addr_filter_get;
+ PI_CMD_STATUS_CHARS_GET_REQ stat_char_get;
+ PI_CMD_CNTRS_GET_REQ cntrs_get;
+ PI_CMD_CNTRS_SET_REQ cntrs_set;
+ PI_CMD_ERROR_LOG_CLEAR_REQ error_log_clear;
+ PI_CMD_ERROR_LOG_GET_REQ error_log_read;
+ PI_CMD_SNMP_SET_REQ snmp_set;
+ PI_CMD_FDDI_MIB_GET_REQ fddi_mib_get;
+ PI_CMD_DEC_EXT_MIB_GET_REQ dec_mib_get;
+ PI_CMD_SMT_MIB_SET_REQ smt_mib_set;
+ PI_CMD_SMT_MIB_GET_REQ smt_mib_get;
+ char pad[PI_CMD_REQ_K_SIZE_MAX];
+ } PI_DMA_CMD_REQ;
+
+typedef union
+ {
+ PI_RSP_HEADER header;
+ PI_CMD_START_RSP start;
+ PI_CMD_FILTERS_SET_RSP filter_set;
+ PI_CMD_FILTERS_GET_RSP filter_get;
+ PI_CMD_CHARS_SET_RSP char_set;
+ PI_CMD_ADDR_FILTER_SET_RSP addr_filter_set;
+ PI_CMD_ADDR_FILTER_GET_RSP addr_filter_get;
+ PI_CMD_STATUS_CHARS_GET_RSP stat_char_get;
+ PI_CMD_CNTRS_GET_RSP cntrs_get;
+ PI_CMD_CNTRS_SET_RSP cntrs_set;
+ PI_CMD_ERROR_LOG_CLEAR_RSP error_log_clear;
+ PI_CMD_ERROR_LOG_GET_RSP error_log_get;
+ PI_CMD_SNMP_SET_RSP snmp_set;
+ PI_CMD_FDDI_MIB_GET_RSP fddi_mib_get;
+ PI_CMD_DEC_EXT_MIB_GET_RSP dec_mib_get;
+ PI_CMD_SMT_MIB_SET_RSP smt_mib_set;
+ PI_CMD_SMT_MIB_GET_RSP smt_mib_get;
+ char pad[PI_CMD_RSP_K_SIZE_MAX];
+ } PI_DMA_CMD_RSP;
+
+typedef union
+ {
+ PI_DMA_CMD_REQ request;
+ PI_DMA_CMD_RSP response;
+ } PI_DMA_CMD_BUFFER;
+
+
+/* Define format of Consumer Block (resident in host memory) */
+
+typedef struct
+ {
+ volatile PI_UINT32 xmt_rcv_data;
+ volatile PI_UINT32 reserved_1;
+ volatile PI_UINT32 smt_host;
+ volatile PI_UINT32 reserved_2;
+ volatile PI_UINT32 unsol;
+ volatile PI_UINT32 reserved_3;
+ volatile PI_UINT32 cmd_rsp;
+ volatile PI_UINT32 reserved_4;
+ volatile PI_UINT32 cmd_req;
+ volatile PI_UINT32 reserved_5;
+ } PI_CONSUMER_BLOCK;
+
+#define PI_CONS_M_RCV_INDEX 0x000000FF
+#define PI_CONS_M_XMT_INDEX 0x00FF0000
+#define PI_CONS_V_RCV_INDEX 0
+#define PI_CONS_V_XMT_INDEX 16
+
+/* Offsets into consumer block */
+
+#define PI_CONS_BLK_K_XMT_RCV 0x00
+#define PI_CONS_BLK_K_SMT_HOST 0x08
+#define PI_CONS_BLK_K_UNSOL 0x10
+#define PI_CONS_BLK_K_CMD_RSP 0x18
+#define PI_CONS_BLK_K_CMD_REQ 0x20
+
+/* Offsets into descriptor block */
+
+#define PI_DESCR_BLK_K_RCV_DATA 0x0000
+#define PI_DESCR_BLK_K_XMT_DATA 0x0800
+#define PI_DESCR_BLK_K_SMT_HOST 0x1000
+#define PI_DESCR_BLK_K_UNSOL 0x1200
+#define PI_DESCR_BLK_K_CMD_RSP 0x1280
+#define PI_DESCR_BLK_K_CMD_REQ 0x1300
+
+/* Define format of a rcv descr (Rcv Data, Cmd Rsp, Unsolicited, SMT Host) */
+/* Note a field has been added for later versions of the PDQ to allow for */
+/* finer granularity of the rcv buffer alignment. For backwards */
+/* compatibility, the two bits (which allow the rcv buffer to be longword */
+/* aligned) have been added at the MBZ bits. To support previous drivers, */
+/* the MBZ definition is left intact. */
+
+typedef struct
+ {
+ PI_UINT32 long_0;
+ PI_UINT32 long_1;
+ } PI_RCV_DESCR;
+
+#define PI_RCV_DESCR_M_SOP 0x80000000
+#define PI_RCV_DESCR_M_SEG_LEN_LO 0x60000000
+#define PI_RCV_DESCR_M_MBZ 0x60000000
+#define PI_RCV_DESCR_M_SEG_LEN 0x1F800000
+#define PI_RCV_DESCR_M_SEG_LEN_HI 0x1FF00000
+#define PI_RCV_DESCR_M_SEG_CNT 0x000F0000
+#define PI_RCV_DESCR_M_BUFF_HI 0x0000FFFF
+
+#define PI_RCV_DESCR_V_SOP 31
+#define PI_RCV_DESCR_V_SEG_LEN_LO 29
+#define PI_RCV_DESCR_V_MBZ 29
+#define PI_RCV_DESCR_V_SEG_LEN 23
+#define PI_RCV_DESCR_V_SEG_LEN_HI 20
+#define PI_RCV_DESCR_V_SEG_CNT 16
+#define PI_RCV_DESCR_V_BUFF_HI 0
+
+/* Define the format of a transmit descriptor (Xmt Data, Cmd Req) */
+
+typedef struct
+ {
+ PI_UINT32 long_0;
+ PI_UINT32 long_1;
+ } PI_XMT_DESCR;
+
+#define PI_XMT_DESCR_M_SOP 0x80000000
+#define PI_XMT_DESCR_M_EOP 0x40000000
+#define PI_XMT_DESCR_M_MBZ 0x20000000
+#define PI_XMT_DESCR_M_SEG_LEN 0x1FFF0000
+#define PI_XMT_DESCR_M_BUFF_HI 0x0000FFFF
+
+#define PI_XMT_DESCR_V_SOP 31
+#define PI_XMT_DESCR_V_EOP 30
+#define PI_XMT_DESCR_V_MBZ 29
+#define PI_XMT_DESCR_V_SEG_LEN 16
+#define PI_XMT_DESCR_V_BUFF_HI 0
+
+/* Define format of the Descriptor Block (resident in host memory) */
+
+#define PI_RCV_DATA_K_NUM_ENTRIES 256
+#define PI_XMT_DATA_K_NUM_ENTRIES 256
+#define PI_SMT_HOST_K_NUM_ENTRIES 64
+#define PI_UNSOL_K_NUM_ENTRIES 16
+#define PI_CMD_RSP_K_NUM_ENTRIES 16
+#define PI_CMD_REQ_K_NUM_ENTRIES 16
+
+typedef struct
+ {
+ PI_RCV_DESCR rcv_data[PI_RCV_DATA_K_NUM_ENTRIES];
+ PI_XMT_DESCR xmt_data[PI_XMT_DATA_K_NUM_ENTRIES];
+ PI_RCV_DESCR smt_host[PI_SMT_HOST_K_NUM_ENTRIES];
+ PI_RCV_DESCR unsol[PI_UNSOL_K_NUM_ENTRIES];
+ PI_RCV_DESCR cmd_rsp[PI_CMD_RSP_K_NUM_ENTRIES];
+ PI_XMT_DESCR cmd_req[PI_CMD_REQ_K_NUM_ENTRIES];
+ } PI_DESCR_BLOCK;
+
+/* Define Port Registers - offsets from PDQ Base address */
+
+#define PI_PDQ_K_REG_PORT_RESET 0x00000000
+#define PI_PDQ_K_REG_HOST_DATA 0x00000004
+#define PI_PDQ_K_REG_PORT_CTRL 0x00000008
+#define PI_PDQ_K_REG_PORT_DATA_A 0x0000000C
+#define PI_PDQ_K_REG_PORT_DATA_B 0x00000010
+#define PI_PDQ_K_REG_PORT_STATUS 0x00000014
+#define PI_PDQ_K_REG_TYPE_0_STATUS 0x00000018
+#define PI_PDQ_K_REG_HOST_INT_ENB 0x0000001C
+#define PI_PDQ_K_REG_TYPE_2_PROD_NOINT 0x00000020
+#define PI_PDQ_K_REG_TYPE_2_PROD 0x00000024
+#define PI_PDQ_K_REG_CMD_RSP_PROD 0x00000028
+#define PI_PDQ_K_REG_CMD_REQ_PROD 0x0000002C
+#define PI_PDQ_K_REG_SMT_HOST_PROD 0x00000030
+#define PI_PDQ_K_REG_UNSOL_PROD 0x00000034
+
+/* Port Control Register - Command codes for primary commands */
+
+#define PI_PCTRL_M_CMD_ERROR 0x8000
+#define PI_PCTRL_M_BLAST_FLASH 0x4000
+#define PI_PCTRL_M_HALT 0x2000
+#define PI_PCTRL_M_COPY_DATA 0x1000
+#define PI_PCTRL_M_ERROR_LOG_START 0x0800
+#define PI_PCTRL_M_ERROR_LOG_READ 0x0400
+#define PI_PCTRL_M_XMT_DATA_FLUSH_DONE 0x0200
+#define PI_PCTRL_M_INIT 0x0100
+#define PI_PCTRL_M_INIT_START 0x0080
+#define PI_PCTRL_M_CONS_BLOCK 0x0040
+#define PI_PCTRL_M_UNINIT 0x0020
+#define PI_PCTRL_M_RING_MEMBER 0x0010
+#define PI_PCTRL_M_MLA 0x0008
+#define PI_PCTRL_M_FW_REV_READ 0x0004
+#define PI_PCTRL_M_DEV_SPECIFIC 0x0002
+#define PI_PCTRL_M_SUB_CMD 0x0001
+
+/* Define sub-commands accessed via the PI_PCTRL_M_SUB_CMD command */
+
+#define PI_SUB_CMD_K_LINK_UNINIT 0x0001
+#define PI_SUB_CMD_K_BURST_SIZE_SET 0x0002
+#define PI_SUB_CMD_K_PDQ_REV_GET 0x0004
+#define PI_SUB_CMD_K_HW_REV_GET 0x0008
+
+/* Define some Port Data B values */
+
+#define PI_PDATA_B_DMA_BURST_SIZE_4 0 /* valid values for command */
+#define PI_PDATA_B_DMA_BURST_SIZE_8 1
+#define PI_PDATA_B_DMA_BURST_SIZE_16 2
+#define PI_PDATA_B_DMA_BURST_SIZE_32 3 /* not supported on PCI */
+#define PI_PDATA_B_DMA_BURST_SIZE_DEF PI_PDATA_B_DMA_BURST_SIZE_16
+
+/* Port Data A Reset state */
+
+#define PI_PDATA_A_RESET_M_UPGRADE 0x00000001
+#define PI_PDATA_A_RESET_M_SOFT_RESET 0x00000002
+#define PI_PDATA_A_RESET_M_SKIP_ST 0x00000004
+
+/* Read adapter MLA address port control command constants */
+
+#define PI_PDATA_A_MLA_K_LO 0
+#define PI_PDATA_A_MLA_K_HI 1
+
+/* Byte Swap values for init command */
+
+#define PI_PDATA_A_INIT_M_DESC_BLK_ADDR 0x0FFFFE000
+#define PI_PDATA_A_INIT_M_RESERVED 0x000001FFC
+#define PI_PDATA_A_INIT_M_BSWAP_DATA 0x000000002
+#define PI_PDATA_A_INIT_M_BSWAP_LITERAL 0x000000001
+
+#define PI_PDATA_A_INIT_V_DESC_BLK_ADDR 13
+#define PI_PDATA_A_INIT_V_RESERVED 3
+#define PI_PDATA_A_INIT_V_BSWAP_DATA 1
+#define PI_PDATA_A_INIT_V_BSWAP_LITERAL 0
+
+/* Port Reset Register */
+
+#define PI_RESET_M_ASSERT_RESET 1
+
+/* Port Status register */
+
+#define PI_PSTATUS_V_RCV_DATA_PENDING 31
+#define PI_PSTATUS_V_XMT_DATA_PENDING 30
+#define PI_PSTATUS_V_SMT_HOST_PENDING 29
+#define PI_PSTATUS_V_UNSOL_PENDING 28
+#define PI_PSTATUS_V_CMD_RSP_PENDING 27
+#define PI_PSTATUS_V_CMD_REQ_PENDING 26
+#define PI_PSTATUS_V_TYPE_0_PENDING 25
+#define PI_PSTATUS_V_RESERVED_1 16
+#define PI_PSTATUS_V_RESERVED_2 11
+#define PI_PSTATUS_V_STATE 8
+#define PI_PSTATUS_V_HALT_ID 0
+
+#define PI_PSTATUS_M_RCV_DATA_PENDING 0x80000000
+#define PI_PSTATUS_M_XMT_DATA_PENDING 0x40000000
+#define PI_PSTATUS_M_SMT_HOST_PENDING 0x20000000
+#define PI_PSTATUS_M_UNSOL_PENDING 0x10000000
+#define PI_PSTATUS_M_CMD_RSP_PENDING 0x08000000
+#define PI_PSTATUS_M_CMD_REQ_PENDING 0x04000000
+#define PI_PSTATUS_M_TYPE_0_PENDING 0x02000000
+#define PI_PSTATUS_M_RESERVED_1 0x01FF0000
+#define PI_PSTATUS_M_RESERVED_2 0x0000F800
+#define PI_PSTATUS_M_STATE 0x00000700
+#define PI_PSTATUS_M_HALT_ID 0x000000FF
+
+/* Define Halt Id's */
+/* Do not insert into this list, only append. */
+
+#define PI_HALT_ID_K_SELFTEST_TIMEOUT 0
+#define PI_HALT_ID_K_PARITY_ERROR 1
+#define PI_HALT_ID_K_HOST_DIR_HALT 2
+#define PI_HALT_ID_K_SW_FAULT 3
+#define PI_HALT_ID_K_HW_FAULT 4
+#define PI_HALT_ID_K_PC_TRACE 5
+#define PI_HALT_ID_K_DMA_ERROR 6 /* Host Data has error reg */
+#define PI_HALT_ID_K_IMAGE_CRC_ERROR 7 /* Image is bad, update it */
+#define PI_HALT_ID_K_BUS_EXCEPTION 8 /* 68K bus exception */
+
+/* Host Interrupt Enable Register as seen by host */
+
+#define PI_HOST_INT_M_XMT_DATA_ENB 0x80000000 /* Type 2 Enables */
+#define PI_HOST_INT_M_RCV_DATA_ENB 0x40000000
+#define PI_HOST_INT_M_SMT_HOST_ENB 0x10000000 /* Type 1 Enables */
+#define PI_HOST_INT_M_UNSOL_ENB 0x20000000
+#define PI_HOST_INT_M_CMD_RSP_ENB 0x08000000
+#define PI_HOST_INT_M_CMD_REQ_ENB 0x04000000
+#define PI_HOST_INT_M_TYPE_1_RESERVED 0x00FF0000
+#define PI_HOST_INT_M_TYPE_0_RESERVED 0x0000FF00 /* Type 0 Enables */
+#define PI_HOST_INT_M_1MS 0x00000080
+#define PI_HOST_INT_M_20MS 0x00000040
+#define PI_HOST_INT_M_CSR_CMD_DONE 0x00000020
+#define PI_HOST_INT_M_STATE_CHANGE 0x00000010
+#define PI_HOST_INT_M_XMT_FLUSH 0x00000008
+#define PI_HOST_INT_M_NXM 0x00000004
+#define PI_HOST_INT_M_PM_PAR_ERR 0x00000002
+#define PI_HOST_INT_M_BUS_PAR_ERR 0x00000001
+
+#define PI_HOST_INT_V_XMT_DATA_ENB 31 /* Type 2 Enables */
+#define PI_HOST_INT_V_RCV_DATA_ENB 30
+#define PI_HOST_INT_V_SMT_HOST_ENB 29 /* Type 1 Enables */
+#define PI_HOST_INT_V_UNSOL_ENB 28
+#define PI_HOST_INT_V_CMD_RSP_ENB 27
+#define PI_HOST_INT_V_CMD_REQ_ENB 26
+#define PI_HOST_INT_V_TYPE_1_RESERVED 16
+#define PI_HOST_INT_V_TYPE_0_RESERVED 8 /* Type 0 Enables */
+#define PI_HOST_INT_V_1MS_ENB 7
+#define PI_HOST_INT_V_20MS_ENB 6
+#define PI_HOST_INT_V_CSR_CMD_DONE_ENB 5
+#define PI_HOST_INT_V_STATE_CHANGE_ENB 4
+#define PI_HOST_INT_V_XMT_FLUSH_ENB 3
+#define PI_HOST_INT_V_NXM_ENB 2
+#define PI_HOST_INT_V_PM_PAR_ERR_ENB 1
+#define PI_HOST_INT_V_BUS_PAR_ERR_ENB 0
+
+#define PI_HOST_INT_K_ACK_ALL_TYPE_0 0x000000FF
+#define PI_HOST_INT_K_DISABLE_ALL_INTS 0x00000000
+#define PI_HOST_INT_K_ENABLE_ALL_INTS 0xFFFFFFFF
+#define PI_HOST_INT_K_ENABLE_DEF_INTS 0xC000001F
+
+/* Type 0 Interrupt Status Register */
+
+#define PI_TYPE_0_STAT_M_1MS 0x00000080
+#define PI_TYPE_0_STAT_M_20MS 0x00000040
+#define PI_TYPE_0_STAT_M_CSR_CMD_DONE 0x00000020
+#define PI_TYPE_0_STAT_M_STATE_CHANGE 0x00000010
+#define PI_TYPE_0_STAT_M_XMT_FLUSH 0x00000008
+#define PI_TYPE_0_STAT_M_NXM 0x00000004
+#define PI_TYPE_0_STAT_M_PM_PAR_ERR 0x00000002
+#define PI_TYPE_0_STAT_M_BUS_PAR_ERR 0x00000001
+
+#define PI_TYPE_0_STAT_V_1MS 7
+#define PI_TYPE_0_STAT_V_20MS 6
+#define PI_TYPE_0_STAT_V_CSR_CMD_DONE 5
+#define PI_TYPE_0_STAT_V_STATE_CHANGE 4
+#define PI_TYPE_0_STAT_V_XMT_FLUSH 3
+#define PI_TYPE_0_STAT_V_NXM 2
+#define PI_TYPE_0_STAT_V_PM_PAR_ERR 1
+#define PI_TYPE_0_STAT_V_BUS_PAR_ERR 0
+
+/* Register definition structures are defined for both big and little endian systems */
+
+#ifndef __BIG_ENDIAN
+
+/* Little endian format of Type 1 Producer register */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 prod;
+ PI_UINT8 comp;
+ PI_UINT8 mbz_1;
+ PI_UINT8 mbz_2;
+ } index;
+ } PI_TYPE_1_PROD_REG;
+
+/* Little endian format of Type 2 Producer register */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 rcv_prod;
+ PI_UINT8 xmt_prod;
+ PI_UINT8 rcv_comp;
+ PI_UINT8 xmt_comp;
+ } index;
+ } PI_TYPE_2_PROD_REG;
+
+/* Little endian format of Type 1 Consumer Block longword */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 cons;
+ PI_UINT8 res0;
+ PI_UINT8 res1;
+ PI_UINT8 res2;
+ } index;
+ } PI_TYPE_1_CONSUMER;
+
+/* Little endian format of Type 2 Consumer Block longword */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 rcv_cons;
+ PI_UINT8 res0;
+ PI_UINT8 xmt_cons;
+ PI_UINT8 res1;
+ } index;
+ } PI_TYPE_2_CONSUMER;
+
+/* Define swapping required by DMA transfers. */
+#define PI_PDATA_A_INIT_M_BSWAP_INIT \
+ (PI_PDATA_A_INIT_M_BSWAP_DATA)
+
+#else /* __BIG_ENDIAN */
+
+/* Big endian format of Type 1 Producer register */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 mbz_2;
+ PI_UINT8 mbz_1;
+ PI_UINT8 comp;
+ PI_UINT8 prod;
+ } index;
+ } PI_TYPE_1_PROD_REG;
+
+/* Big endian format of Type 2 Producer register */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 xmt_comp;
+ PI_UINT8 rcv_comp;
+ PI_UINT8 xmt_prod;
+ PI_UINT8 rcv_prod;
+ } index;
+ } PI_TYPE_2_PROD_REG;
+
+/* Big endian format of Type 1 Consumer Block longword */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 res2;
+ PI_UINT8 res1;
+ PI_UINT8 res0;
+ PI_UINT8 cons;
+ } index;
+ } PI_TYPE_1_CONSUMER;
+
+/* Big endian format of Type 2 Consumer Block longword */
+
+typedef union
+ {
+ PI_UINT32 lword;
+ struct
+ {
+ PI_UINT8 res1;
+ PI_UINT8 xmt_cons;
+ PI_UINT8 res0;
+ PI_UINT8 rcv_cons;
+ } index;
+ } PI_TYPE_2_CONSUMER;
+
+/* Define swapping required by DMA transfers. */
+#define PI_PDATA_A_INIT_M_BSWAP_INIT \
+ (PI_PDATA_A_INIT_M_BSWAP_DATA | PI_PDATA_A_INIT_M_BSWAP_LITERAL)
+
+#endif /* __BIG_ENDIAN */
+
+/* Define TC PDQ CSR offset and length */
+
+#define PI_TC_K_CSR_OFFSET 0x100000
+#define PI_TC_K_CSR_LEN 0x40 /* 64 bytes */
+
+/* Define EISA controller register offsets */
+
+#define PI_ESIC_K_CSR_IO_LEN 0x40 /* 64 bytes */
+#define PI_ESIC_K_BURST_HOLDOFF_LEN 0x04 /* 4 bytes */
+#define PI_ESIC_K_ESIC_CSR_LEN 0x40 /* 64 bytes */
+
+#define PI_DEFEA_K_CSR_IO 0x000
+#define PI_DEFEA_K_BURST_HOLDOFF 0x040
+#define PI_ESIC_K_ESIC_CSR 0xC80
+
+#define PI_ESIC_K_SLOT_ID 0xC80
+#define PI_ESIC_K_SLOT_CNTRL 0xC84
+#define PI_ESIC_K_MEM_ADD_CMP_0 0xC85
+#define PI_ESIC_K_MEM_ADD_CMP_1 0xC86
+#define PI_ESIC_K_MEM_ADD_CMP_2 0xC87
+#define PI_ESIC_K_MEM_ADD_HI_CMP_0 0xC88
+#define PI_ESIC_K_MEM_ADD_HI_CMP_1 0xC89
+#define PI_ESIC_K_MEM_ADD_HI_CMP_2 0xC8A
+#define PI_ESIC_K_MEM_ADD_MASK_0 0xC8B
+#define PI_ESIC_K_MEM_ADD_MASK_1 0xC8C
+#define PI_ESIC_K_MEM_ADD_MASK_2 0xC8D
+#define PI_ESIC_K_MEM_ADD_LO_CMP_0 0xC8E
+#define PI_ESIC_K_MEM_ADD_LO_CMP_1 0xC8F
+#define PI_ESIC_K_MEM_ADD_LO_CMP_2 0xC90
+#define PI_ESIC_K_IO_ADD_CMP_0_0 0xC91
+#define PI_ESIC_K_IO_ADD_CMP_0_1 0xC92
+#define PI_ESIC_K_IO_ADD_CMP_1_0 0xC93
+#define PI_ESIC_K_IO_ADD_CMP_1_1 0xC94
+#define PI_ESIC_K_IO_ADD_CMP_2_0 0xC95
+#define PI_ESIC_K_IO_ADD_CMP_2_1 0xC96
+#define PI_ESIC_K_IO_ADD_CMP_3_0 0xC97
+#define PI_ESIC_K_IO_ADD_CMP_3_1 0xC98
+#define PI_ESIC_K_IO_ADD_MASK_0_0 0xC99
+#define PI_ESIC_K_IO_ADD_MASK_0_1 0xC9A
+#define PI_ESIC_K_IO_ADD_MASK_1_0 0xC9B
+#define PI_ESIC_K_IO_ADD_MASK_1_1 0xC9C
+#define PI_ESIC_K_IO_ADD_MASK_2_0 0xC9D
+#define PI_ESIC_K_IO_ADD_MASK_2_1 0xC9E
+#define PI_ESIC_K_IO_ADD_MASK_3_0 0xC9F
+#define PI_ESIC_K_IO_ADD_MASK_3_1 0xCA0
+#define PI_ESIC_K_MOD_CONFIG_1 0xCA1
+#define PI_ESIC_K_MOD_CONFIG_2 0xCA2
+#define PI_ESIC_K_MOD_CONFIG_3 0xCA3
+#define PI_ESIC_K_MOD_CONFIG_4 0xCA4
+#define PI_ESIC_K_MOD_CONFIG_5 0xCA5
+#define PI_ESIC_K_MOD_CONFIG_6 0xCA6
+#define PI_ESIC_K_MOD_CONFIG_7 0xCA7
+#define PI_ESIC_K_DIP_SWITCH 0xCA8
+#define PI_ESIC_K_IO_CONFIG_STAT_0 0xCA9
+#define PI_ESIC_K_IO_CONFIG_STAT_1 0xCAA
+#define PI_ESIC_K_DMA_CONFIG 0xCAB
+#define PI_ESIC_K_INPUT_PORT 0xCAC
+#define PI_ESIC_K_OUTPUT_PORT 0xCAD
+#define PI_ESIC_K_FUNCTION_CNTRL 0xCAE
+
+/* Define the bits in the function control register. */
+
+#define PI_FUNCTION_CNTRL_M_IOCS0 0x01
+#define PI_FUNCTION_CNTRL_M_IOCS1 0x02
+#define PI_FUNCTION_CNTRL_M_IOCS2 0x04
+#define PI_FUNCTION_CNTRL_M_IOCS3 0x08
+#define PI_FUNCTION_CNTRL_M_MEMCS0 0x10
+#define PI_FUNCTION_CNTRL_M_MEMCS1 0x20
+#define PI_FUNCTION_CNTRL_M_DMA 0x80
+
+/* Define the bits in the slot control register. */
+
+#define PI_SLOT_CNTRL_M_RESET 0x04 /* Don't use. */
+#define PI_SLOT_CNTRL_M_ERROR 0x02 /* Not implemented. */
+#define PI_SLOT_CNTRL_M_ENB 0x01 /* Must be set. */
+
+/* Define the bits in the burst holdoff register. */
+
+#define PI_BURST_HOLDOFF_M_HOLDOFF 0xFC
+#define PI_BURST_HOLDOFF_M_RESERVED 0x02
+#define PI_BURST_HOLDOFF_M_MEM_MAP 0x01
+
+#define PI_BURST_HOLDOFF_V_HOLDOFF 2
+#define PI_BURST_HOLDOFF_V_RESERVED 1
+#define PI_BURST_HOLDOFF_V_MEM_MAP 0
+
+/* Define the implicit mask of the Memory Address Compare registers. */
+
+#define PI_MEM_ADD_MASK_M 0x3ff
+
+/* Define the fields in the I/O Address Compare and Mask registers. */
+
+#define PI_IO_CMP_M_SLOT 0xf0
+
+#define PI_IO_CMP_V_SLOT 4
+
+/* Define the fields in the Interrupt Channel Configuration and Status reg */
+
+#define PI_CONFIG_STAT_0_M_PEND 0x80
+#define PI_CONFIG_STAT_0_M_RES_1 0x40
+#define PI_CONFIG_STAT_0_M_IREQ_OUT 0x20
+#define PI_CONFIG_STAT_0_M_IREQ_IN 0x10
+#define PI_CONFIG_STAT_0_M_INT_ENB 0x08
+#define PI_CONFIG_STAT_0_M_RES_0 0x04
+#define PI_CONFIG_STAT_0_M_IRQ 0x03
+
+#define PI_CONFIG_STAT_0_V_PEND 7
+#define PI_CONFIG_STAT_0_V_RES_1 6
+#define PI_CONFIG_STAT_0_V_IREQ_OUT 5
+#define PI_CONFIG_STAT_0_V_IREQ_IN 4
+#define PI_CONFIG_STAT_0_V_INT_ENB 3
+#define PI_CONFIG_STAT_0_V_RES_0 2
+#define PI_CONFIG_STAT_0_V_IRQ 0
+
+#define PI_CONFIG_STAT_0_IRQ_K_9 0
+#define PI_CONFIG_STAT_0_IRQ_K_10 1
+#define PI_CONFIG_STAT_0_IRQ_K_11 2
+#define PI_CONFIG_STAT_0_IRQ_K_15 3
+
+/* Define DEC FDDIcontroller/EISA (DEFEA) EISA hardware ID's */
+
+#define DEFEA_PRODUCT_ID 0x0030A310 /* DEC product 300 (no rev) */
+#define DEFEA_PROD_ID_1 0x0130A310 /* DEC product 300, rev 1 */
+#define DEFEA_PROD_ID_2 0x0230A310 /* DEC product 300, rev 2 */
+#define DEFEA_PROD_ID_3 0x0330A310 /* DEC product 300, rev 3 */
+#define DEFEA_PROD_ID_4 0x0430A310 /* DEC product 300, rev 4 */
+
+/**********************************************/
+/* Digital PFI Specification v1.0 Definitions */
+/**********************************************/
+
+/* PCI Configuration Space Constants */
+
+#define PFI_K_LAT_TIMER_DEF 0x88 /* def max master latency timer */
+#define PFI_K_LAT_TIMER_MIN 0x20 /* min max master latency timer */
+#define PFI_K_CSR_MEM_LEN 0x80 /* 128 bytes */
+#define PFI_K_CSR_IO_LEN 0x80 /* 128 bytes */
+#define PFI_K_PKT_MEM_LEN 0x10000 /* 64K bytes */
+
+/* PFI Register Offsets (starting at PDQ Register Base Address) */
+
+#define PFI_K_REG_RESERVED_0 0X00000038
+#define PFI_K_REG_RESERVED_1 0X0000003C
+#define PFI_K_REG_MODE_CTRL 0X00000040
+#define PFI_K_REG_STATUS 0X00000044
+#define PFI_K_REG_FIFO_WRITE 0X00000048
+#define PFI_K_REG_FIFO_READ 0X0000004C
+
+/* PFI Mode Control Register Constants */
+
+#define PFI_MODE_M_RESERVED 0XFFFFFFF0
+#define PFI_MODE_M_TGT_ABORT_ENB 0X00000008
+#define PFI_MODE_M_PDQ_INT_ENB 0X00000004
+#define PFI_MODE_M_PFI_INT_ENB 0X00000002
+#define PFI_MODE_M_DMA_ENB 0X00000001
+
+#define PFI_MODE_V_RESERVED 4
+#define PFI_MODE_V_TGT_ABORT_ENB 3
+#define PFI_MODE_V_PDQ_INT_ENB 2
+#define PFI_MODE_V_PFI_INT_ENB 1
+#define PFI_MODE_V_DMA_ENB 0
+
+#define PFI_MODE_K_ALL_DISABLE 0X00000000
+
+/* PFI Status Register Constants */
+
+#define PFI_STATUS_M_RESERVED 0XFFFFFFC0
+#define PFI_STATUS_M_PFI_ERROR 0X00000020 /* only valid in rev 1 or later PFI */
+#define PFI_STATUS_M_PDQ_INT 0X00000010
+#define PFI_STATUS_M_PDQ_DMA_ABORT 0X00000008
+#define PFI_STATUS_M_FIFO_FULL 0X00000004
+#define PFI_STATUS_M_FIFO_EMPTY 0X00000002
+#define PFI_STATUS_M_DMA_IN_PROGRESS 0X00000001
+
+#define PFI_STATUS_V_RESERVED 6
+#define PFI_STATUS_V_PFI_ERROR 5 /* only valid in rev 1 or later PFI */
+#define PFI_STATUS_V_PDQ_INT 4
+#define PFI_STATUS_V_PDQ_DMA_ABORT 3
+#define PFI_STATUS_V_FIFO_FULL 2
+#define PFI_STATUS_V_FIFO_EMPTY 1
+#define PFI_STATUS_V_DMA_IN_PROGRESS 0
+
+#define DFX_FC_PRH2_PRH1_PRH0 0x54003820 /* Packet Request Header bytes + FC */
+#define DFX_PRH0_BYTE 0x20 /* Packet Request Header byte 0 */
+#define DFX_PRH1_BYTE 0x38 /* Packet Request Header byte 1 */
+#define DFX_PRH2_BYTE 0x00 /* Packet Request Header byte 2 */
+
+/* Driver routine status (return) codes */
+
+#define DFX_K_SUCCESS 0 /* routine succeeded */
+#define DFX_K_FAILURE 1 /* routine failed */
+#define DFX_K_OUTSTATE 2 /* bad state for command */
+#define DFX_K_HW_TIMEOUT 3 /* command timed out */
+
+/* Define LLC host receive buffer min/max/default values */
+
+#define RCV_BUFS_MIN 2 /* minimum pre-allocated receive buffers */
+#define RCV_BUFS_MAX 32 /* maximum pre-allocated receive buffers */
+#define RCV_BUFS_DEF 8 /* default pre-allocated receive buffers */
+
+/* Define offsets into FDDI LLC or SMT receive frame buffers - used when indicating frames */
+
+#define RCV_BUFF_K_DESCR 0 /* four byte FMC descriptor */
+#define RCV_BUFF_K_PADDING 4 /* three null bytes */
+#define RCV_BUFF_K_FC 7 /* one byte frame control */
+#define RCV_BUFF_K_DA 8 /* six byte destination address */
+#define RCV_BUFF_K_SA 14 /* six byte source address */
+#define RCV_BUFF_K_DATA 20 /* offset to start of packet data */
+
+/* Define offsets into FDDI LLC transmit frame buffers - used when sending frames */
+
+#define XMT_BUFF_K_FC 0 /* one byte frame control */
+#define XMT_BUFF_K_DA 1 /* six byte destination address */
+#define XMT_BUFF_K_SA 7 /* six byte source address */
+#define XMT_BUFF_K_DATA 13 /* offset to start of packet data */
+
+/* Macro for checking a "value" is within a specific range */
+
+#define IN_RANGE(value,low,high) ((value >= low) && (value <= high))
+
+/* Only execute special print call when debug driver was built */
+
+#ifdef DEFXX_DEBUG
+#define DBG_printk(args...) printk(args)
+#else
+#define DBG_printk(args...)
+#endif
+
+/* Define constants for masking/unmasking interrupts */
+
+#define DFX_MASK_INTERRUPTS 1
+#define DFX_UNMASK_INTERRUPTS 0
+
+/* Define structure for driver transmit descriptor block */
+
+typedef struct
+ {
+ struct sk_buff *p_skb; /* ptr to skb */
+ } XMT_DRIVER_DESCR;
+
+typedef struct DFX_board_tag
+ {
+ /* Keep virtual and physical pointers to locked, physically contiguous memory */
+
+ char *kmalloced; /* pci_free_consistent this on unload */
+ dma_addr_t kmalloced_dma;
+ /* DMA handle for the above */
+ PI_DESCR_BLOCK *descr_block_virt; /* PDQ descriptor block virt address */
+ dma_addr_t descr_block_phys; /* PDQ descriptor block phys address */
+ PI_DMA_CMD_REQ *cmd_req_virt; /* Command request buffer virt address */
+ dma_addr_t cmd_req_phys; /* Command request buffer phys address */
+ PI_DMA_CMD_RSP *cmd_rsp_virt; /* Command response buffer virt address */
+ dma_addr_t cmd_rsp_phys; /* Command response buffer phys address */
+ char *rcv_block_virt; /* LLC host receive queue buf blk virt */
+ dma_addr_t rcv_block_phys; /* LLC host receive queue buf blk phys */
+ PI_CONSUMER_BLOCK *cons_block_virt; /* PDQ consumer block virt address */
+ dma_addr_t cons_block_phys; /* PDQ consumer block phys address */
+
+ /* Keep local copies of Type 1 and Type 2 register data */
+
+ PI_TYPE_1_PROD_REG cmd_req_reg; /* Command Request register */
+ PI_TYPE_1_PROD_REG cmd_rsp_reg; /* Command Response register */
+ PI_TYPE_2_PROD_REG rcv_xmt_reg; /* Type 2 (RCV/XMT) register */
+
+ /* Storage for unicast and multicast address entries in adapter CAM */
+
+ u8 uc_table[1*FDDI_K_ALEN];
+ u32 uc_count; /* number of unicast addresses */
+ u8 mc_table[PI_CMD_ADDR_FILTER_K_SIZE*FDDI_K_ALEN];
+ u32 mc_count; /* number of multicast addresses */
+
+ /* Current packet filter settings */
+
+ u32 ind_group_prom; /* LLC individual & group frame prom mode */
+ u32 group_prom; /* LLC group (multicast) frame prom mode */
+
+ /* Link available flag needed to determine whether to drop outgoing packet requests */
+
+ u32 link_available; /* is link available? */
+
+ /* Resources to indicate reset type when resetting adapter */
+
+ u32 reset_type; /* skip or rerun diagnostics */
+
+ /* Store pointers to receive buffers for queue processing code */
+
+ char *p_rcv_buff_va[PI_RCV_DATA_K_NUM_ENTRIES];
+
+ /* Store pointers to transmit buffers for transmit completion code */
+
+ XMT_DRIVER_DESCR xmt_drv_descr_blk[PI_XMT_DATA_K_NUM_ENTRIES];
+
+ /* Transmit spinlocks */
+
+ spinlock_t lock;
+
+ /* Store device, bus-specific, and parameter information for this adapter */
+
+ struct net_device *dev; /* pointer to device structure */
+ union {
+ void __iomem *mem;
+ int port;
+ } base; /* base address */
+ struct device *bus_dev;
+ u32 full_duplex_enb; /* FDDI Full Duplex enable (1 == on, 2 == off) */
+ u32 req_ttrt; /* requested TTRT value (in 80ns units) */
+ u32 burst_size; /* adapter burst size (enumerated) */
+ u32 rcv_bufs_to_post; /* receive buffers to post for LLC host queue */
+ u8 factory_mac_addr[FDDI_K_ALEN]; /* factory (on-board) MAC address */
+
+ /* Common FDDI statistics structure and private counters */
+
+ struct fddi_statistics stats;
+
+ u32 rcv_discards;
+ u32 rcv_crc_errors;
+ u32 rcv_frame_status_errors;
+ u32 rcv_length_errors;
+ u32 rcv_total_frames;
+ u32 rcv_multicast_frames;
+ u32 rcv_total_bytes;
+
+ u32 xmt_discards;
+ u32 xmt_length_errors;
+ u32 xmt_total_frames;
+ u32 xmt_total_bytes;
+ } DFX_board_t;
+
+#endif /* #ifndef _DEFXX_H_ */
diff --git a/drivers/net/fddi/skfp/Makefile b/drivers/net/fddi/skfp/Makefile
new file mode 100644
index 000000000..b0be0234a
--- /dev/null
+++ b/drivers/net/fddi/skfp/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the SysKonnect FDDI PCI adapter driver
+#
+
+obj-$(CONFIG_SKFP) += skfp.o
+
+skfp-objs := skfddi.o hwmtm.o fplustm.o smt.o cfm.o \
+ ecm.o pcmplc.o pmf.o queue.o rmt.o \
+ smtdef.o smtinit.o smttimer.o srf.o hwt.o \
+ drvfbi.o ess.o
+
+# NOTE:
+# Compiling this driver produces some warnings (and some more are
+# switched off below), but I did not fix this, because the Hardware
+# Module source (see skfddi.c for details) is used for different
+# drivers, and fixing it for Linux might bring problems on other
+# projects. To keep the source common for all those drivers (and
+# thus simplify fixes to it), please do not clean it up!
+
+ccflags-y := -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes
diff --git a/drivers/net/fddi/skfp/cfm.c b/drivers/net/fddi/skfp/cfm.c
new file mode 100644
index 000000000..e395ace31
--- /dev/null
+++ b/drivers/net/fddi/skfp/cfm.c
@@ -0,0 +1,627 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ SMT CFM
+ Configuration Management
+ DAS with single MAC
+*/
+
+/*
+ * Hardware independent state machine implemantation
+ * The following external SMT functions are referenced :
+ *
+ * queue_event()
+ *
+ * The following external HW dependent functions are referenced :
+ * config_mux()
+ *
+ * The following HW dependent events are required :
+ * NONE
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)cfm.c 2.18 98/10/06 (C) SK " ;
+#endif
+
+/*
+ * FSM Macros
+ */
+#define AFLAG 0x10
+#define GO_STATE(x) (smc->mib.fddiSMTCF_State = (x)|AFLAG)
+#define ACTIONS_DONE() (smc->mib.fddiSMTCF_State &= ~AFLAG)
+#define ACTIONS(x) (x|AFLAG)
+
+#ifdef DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const cfm_states[] = {
+ "SC0_ISOLATED","CF1","CF2","CF3","CF4",
+ "SC1_WRAP_A","SC2_WRAP_B","SC5_TRHU_B","SC7_WRAP_S",
+ "SC9_C_WRAP_A","SC10_C_WRAP_B","SC11_C_WRAP_S","SC4_THRU_A"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const cfm_events[] = {
+ "NONE","CF_LOOP_A","CF_LOOP_B","CF_JOIN_A","CF_JOIN_B"
+} ;
+#endif
+
+/*
+ * map from state to downstream port type
+ */
+static const unsigned char cf_to_ptype[] = {
+ TNONE,TNONE,TNONE,TNONE,TNONE,
+ TNONE,TB,TB,TS,
+ TA,TB,TS,TB
+} ;
+
+/*
+ * CEM port states
+ */
+#define CEM_PST_DOWN 0
+#define CEM_PST_UP 1
+#define CEM_PST_HOLD 2
+/* define portstate array only for A and B port */
+/* Do this within the smc structure (use in multiple cards) */
+
+/*
+ * all Globals are defined in smc.h
+ * struct s_cfm
+ */
+
+/*
+ * function declarations
+ */
+static void cfm_fsm(struct s_smc *smc, int cmd);
+
+/*
+ init CFM state machine
+ clear all CFM vars and flags
+*/
+void cfm_init(struct s_smc *smc)
+{
+ smc->mib.fddiSMTCF_State = ACTIONS(SC0_ISOLATED) ;
+ smc->r.rm_join = 0 ;
+ smc->r.rm_loop = 0 ;
+ smc->y[PA].scrub = 0 ;
+ smc->y[PB].scrub = 0 ;
+ smc->y[PA].cem_pst = CEM_PST_DOWN ;
+ smc->y[PB].cem_pst = CEM_PST_DOWN ;
+}
+
+/* Some terms conditions used by the selection criteria */
+#define THRU_ENABLED(smc) (smc->y[PA].pc_mode != PM_TREE && \
+ smc->y[PB].pc_mode != PM_TREE)
+/* Selection criteria for the ports */
+static void selection_criteria (struct s_smc *smc, struct s_phy *phy)
+{
+
+ switch (phy->mib->fddiPORTMy_Type) {
+ case TA:
+ if ( !THRU_ENABLED(smc) && smc->y[PB].cf_join ) {
+ phy->wc_flag = TRUE ;
+ } else {
+ phy->wc_flag = FALSE ;
+ }
+
+ break;
+ case TB:
+ /* take precedence over PA */
+ phy->wc_flag = FALSE ;
+ break;
+ case TS:
+ phy->wc_flag = FALSE ;
+ break;
+ case TM:
+ phy->wc_flag = FALSE ;
+ break;
+ }
+
+}
+
+void all_selection_criteria(struct s_smc *smc)
+{
+ struct s_phy *phy ;
+ int p ;
+
+ for ( p = 0,phy = smc->y ; p < NUMPHYS; p++, phy++ ) {
+ /* Do the selection criteria */
+ selection_criteria (smc,phy);
+ }
+}
+
+static void cem_priv_state(struct s_smc *smc, int event)
+/* State machine for private PORT states: used to optimize dual homing */
+{
+ int np; /* Number of the port */
+ int i;
+
+ /* Do this only in a DAS */
+ if (smc->s.sas != SMT_DAS )
+ return ;
+
+ np = event - CF_JOIN;
+
+ if (np != PA && np != PB) {
+ return ;
+ }
+ /* Change the port state according to the event (portnumber) */
+ if (smc->y[np].cf_join) {
+ smc->y[np].cem_pst = CEM_PST_UP ;
+ } else if (!smc->y[np].wc_flag) {
+ /* set the port to done only if it is not withheld */
+ smc->y[np].cem_pst = CEM_PST_DOWN ;
+ }
+
+ /* Don't set an hold port to down */
+
+ /* Check all ports of restart conditions */
+ for (i = 0 ; i < 2 ; i ++ ) {
+ /* Check all port for PORT is on hold and no withhold is done */
+ if ( smc->y[i].cem_pst == CEM_PST_HOLD && !smc->y[i].wc_flag ) {
+ smc->y[i].cem_pst = CEM_PST_DOWN;
+ queue_event(smc,(int)(EVENT_PCM+i),PC_START) ;
+ }
+ if ( smc->y[i].cem_pst == CEM_PST_UP && smc->y[i].wc_flag ) {
+ smc->y[i].cem_pst = CEM_PST_HOLD;
+ queue_event(smc,(int)(EVENT_PCM+i),PC_START) ;
+ }
+ if ( smc->y[i].cem_pst == CEM_PST_DOWN && smc->y[i].wc_flag ) {
+ /*
+ * The port must be restarted when the wc_flag
+ * will be reset. So set the port on hold.
+ */
+ smc->y[i].cem_pst = CEM_PST_HOLD;
+ }
+ }
+ return ;
+}
+
+/*
+ CFM state machine
+ called by dispatcher
+
+ do
+ display state change
+ process event
+ until SM is stable
+*/
+void cfm(struct s_smc *smc, int event)
+{
+ int state ; /* remember last state */
+ int cond ;
+ int oldstate ;
+
+ /* We will do the following: */
+ /* - compute the variable WC_Flag for every port (This is where */
+ /* we can extend the requested path checking !!) */
+ /* - do the old (SMT 6.2 like) state machine */
+ /* - do the resulting station states */
+
+ all_selection_criteria (smc);
+
+ /* We will check now whether a state transition is allowed or not */
+ /* - change the portstates */
+ cem_priv_state (smc, event);
+
+ oldstate = smc->mib.fddiSMTCF_State ;
+ do {
+ DB_CFM("CFM : state %s%s",
+ (smc->mib.fddiSMTCF_State & AFLAG) ? "ACTIONS " : "",
+ cfm_states[smc->mib.fddiSMTCF_State & ~AFLAG]) ;
+ DB_CFM(" event %s\n",cfm_events[event],0) ;
+ state = smc->mib.fddiSMTCF_State ;
+ cfm_fsm(smc,event) ;
+ event = 0 ;
+ } while (state != smc->mib.fddiSMTCF_State) ;
+
+#ifndef SLIM_SMT
+ /*
+ * check peer wrap condition
+ */
+ cond = FALSE ;
+ if ( (smc->mib.fddiSMTCF_State == SC9_C_WRAP_A &&
+ smc->y[PA].pc_mode == PM_PEER) ||
+ (smc->mib.fddiSMTCF_State == SC10_C_WRAP_B &&
+ smc->y[PB].pc_mode == PM_PEER) ||
+ (smc->mib.fddiSMTCF_State == SC11_C_WRAP_S &&
+ smc->y[PS].pc_mode == PM_PEER &&
+ smc->y[PS].mib->fddiPORTNeighborType != TS ) ) {
+ cond = TRUE ;
+ }
+ if (cond != smc->mib.fddiSMTPeerWrapFlag)
+ smt_srf_event(smc,SMT_COND_SMT_PEER_WRAP,0,cond) ;
+
+#if 0
+ /*
+ * Don't send ever MAC_PATH_CHANGE events. Our MAC is hard-wired
+ * to the primary path.
+ */
+ /*
+ * path change
+ */
+ if (smc->mib.fddiSMTCF_State != oldstate) {
+ smt_srf_event(smc,SMT_EVENT_MAC_PATH_CHANGE,INDEX_MAC,0) ;
+ }
+#endif
+#endif /* no SLIM_SMT */
+
+ /*
+ * set MAC port type
+ */
+ smc->mib.m[MAC0].fddiMACDownstreamPORTType =
+ cf_to_ptype[smc->mib.fddiSMTCF_State] ;
+ cfm_state_change(smc,(int)smc->mib.fddiSMTCF_State) ;
+}
+
+/*
+ process CFM event
+*/
+/*ARGSUSED1*/
+static void cfm_fsm(struct s_smc *smc, int cmd)
+{
+ switch(smc->mib.fddiSMTCF_State) {
+ case ACTIONS(SC0_ISOLATED) :
+ smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+ smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+ smc->mib.p[PA].fddiPORTMACPlacement = 0 ;
+ smc->mib.p[PB].fddiPORTMACPlacement = 0 ;
+ smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_SEPA ;
+ config_mux(smc,MUX_ISOLATE) ; /* configure PHY Mux */
+ smc->r.rm_loop = FALSE ;
+ smc->r.rm_join = FALSE ;
+ queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+ /* Don't do the WC-Flag changing here */
+ ACTIONS_DONE() ;
+ DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+ break;
+ case SC0_ISOLATED :
+ /*SC07*/
+ /*SAS port can be PA or PB ! */
+ if (smc->s.sas && (smc->y[PA].cf_join || smc->y[PA].cf_loop ||
+ smc->y[PB].cf_join || smc->y[PB].cf_loop)) {
+ GO_STATE(SC11_C_WRAP_S) ;
+ break ;
+ }
+ /*SC01*/
+ if ((smc->y[PA].cem_pst == CEM_PST_UP && smc->y[PA].cf_join &&
+ !smc->y[PA].wc_flag) || smc->y[PA].cf_loop) {
+ GO_STATE(SC9_C_WRAP_A) ;
+ break ;
+ }
+ /*SC02*/
+ if ((smc->y[PB].cem_pst == CEM_PST_UP && smc->y[PB].cf_join &&
+ !smc->y[PB].wc_flag) || smc->y[PB].cf_loop) {
+ GO_STATE(SC10_C_WRAP_B) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(SC9_C_WRAP_A) :
+ smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_CONCATENATED ;
+ smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+ smc->mib.p[PA].fddiPORTMACPlacement = INDEX_MAC ;
+ smc->mib.p[PB].fddiPORTMACPlacement = 0 ;
+ smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_CON ;
+ config_mux(smc,MUX_WRAPA) ; /* configure PHY mux */
+ if (smc->y[PA].cf_loop) {
+ smc->r.rm_join = FALSE ;
+ smc->r.rm_loop = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_LOOP) ;/* signal RMT */
+ }
+ if (smc->y[PA].cf_join) {
+ smc->r.rm_loop = FALSE ;
+ smc->r.rm_join = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+ }
+ ACTIONS_DONE() ;
+ DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+ break ;
+ case SC9_C_WRAP_A :
+ /*SC10*/
+ if ( (smc->y[PA].wc_flag || !smc->y[PA].cf_join) &&
+ !smc->y[PA].cf_loop ) {
+ GO_STATE(SC0_ISOLATED) ;
+ break ;
+ }
+ /*SC12*/
+ else if ( (smc->y[PB].cf_loop && smc->y[PA].cf_join &&
+ smc->y[PA].cem_pst == CEM_PST_UP) ||
+ ((smc->y[PB].cf_loop ||
+ (smc->y[PB].cf_join &&
+ smc->y[PB].cem_pst == CEM_PST_UP)) &&
+ (smc->y[PA].pc_mode == PM_TREE ||
+ smc->y[PB].pc_mode == PM_TREE))) {
+ smc->y[PA].scrub = TRUE ;
+ GO_STATE(SC10_C_WRAP_B) ;
+ break ;
+ }
+ /*SC14*/
+ else if (!smc->s.attach_s &&
+ smc->y[PA].cf_join &&
+ smc->y[PA].cem_pst == CEM_PST_UP &&
+ smc->y[PA].pc_mode == PM_PEER && smc->y[PB].cf_join &&
+ smc->y[PB].cem_pst == CEM_PST_UP &&
+ smc->y[PB].pc_mode == PM_PEER) {
+ smc->y[PA].scrub = TRUE ;
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC4_THRU_A) ;
+ break ;
+ }
+ /*SC15*/
+ else if ( smc->s.attach_s &&
+ smc->y[PA].cf_join &&
+ smc->y[PA].cem_pst == CEM_PST_UP &&
+ smc->y[PA].pc_mode == PM_PEER &&
+ smc->y[PB].cf_join &&
+ smc->y[PB].cem_pst == CEM_PST_UP &&
+ smc->y[PB].pc_mode == PM_PEER) {
+ smc->y[PA].scrub = TRUE ;
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC5_THRU_B) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(SC10_C_WRAP_B) :
+ smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+ smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_CONCATENATED ;
+ smc->mib.p[PA].fddiPORTMACPlacement = 0 ;
+ smc->mib.p[PB].fddiPORTMACPlacement = INDEX_MAC ;
+ smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_CON ;
+ config_mux(smc,MUX_WRAPB) ; /* configure PHY mux */
+ if (smc->y[PB].cf_loop) {
+ smc->r.rm_join = FALSE ;
+ smc->r.rm_loop = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_LOOP) ;/* signal RMT */
+ }
+ if (smc->y[PB].cf_join) {
+ smc->r.rm_loop = FALSE ;
+ smc->r.rm_join = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+ }
+ ACTIONS_DONE() ;
+ DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+ break ;
+ case SC10_C_WRAP_B :
+ /*SC20*/
+ if ( !smc->y[PB].cf_join && !smc->y[PB].cf_loop ) {
+ GO_STATE(SC0_ISOLATED) ;
+ break ;
+ }
+ /*SC21*/
+ else if ( smc->y[PA].cf_loop && smc->y[PA].pc_mode == PM_PEER &&
+ smc->y[PB].cf_join && smc->y[PB].pc_mode == PM_PEER) {
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC9_C_WRAP_A) ;
+ break ;
+ }
+ /*SC24*/
+ else if (!smc->s.attach_s &&
+ smc->y[PA].cf_join && smc->y[PA].pc_mode == PM_PEER &&
+ smc->y[PB].cf_join && smc->y[PB].pc_mode == PM_PEER) {
+ smc->y[PA].scrub = TRUE ;
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC4_THRU_A) ;
+ break ;
+ }
+ /*SC25*/
+ else if ( smc->s.attach_s &&
+ smc->y[PA].cf_join && smc->y[PA].pc_mode == PM_PEER &&
+ smc->y[PB].cf_join && smc->y[PB].pc_mode == PM_PEER) {
+ smc->y[PA].scrub = TRUE ;
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC5_THRU_B) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(SC4_THRU_A) :
+ smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_THRU ;
+ smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_THRU ;
+ smc->mib.p[PA].fddiPORTMACPlacement = 0 ;
+ smc->mib.p[PB].fddiPORTMACPlacement = INDEX_MAC ;
+ smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_THRU ;
+ config_mux(smc,MUX_THRUA) ; /* configure PHY mux */
+ smc->r.rm_loop = FALSE ;
+ smc->r.rm_join = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+ ACTIONS_DONE() ;
+ DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+ break ;
+ case SC4_THRU_A :
+ /*SC41*/
+ if (smc->y[PB].wc_flag || !smc->y[PB].cf_join) {
+ smc->y[PA].scrub = TRUE ;
+ GO_STATE(SC9_C_WRAP_A) ;
+ break ;
+ }
+ /*SC42*/
+ else if (!smc->y[PA].cf_join || smc->y[PA].wc_flag) {
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC10_C_WRAP_B) ;
+ break ;
+ }
+ /*SC45*/
+ else if (smc->s.attach_s) {
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC5_THRU_B) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(SC5_THRU_B) :
+ smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_THRU ;
+ smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_THRU ;
+ smc->mib.p[PA].fddiPORTMACPlacement = INDEX_MAC ;
+ smc->mib.p[PB].fddiPORTMACPlacement = 0 ;
+ smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_THRU ;
+ config_mux(smc,MUX_THRUB) ; /* configure PHY mux */
+ smc->r.rm_loop = FALSE ;
+ smc->r.rm_join = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+ ACTIONS_DONE() ;
+ DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+ break ;
+ case SC5_THRU_B :
+ /*SC51*/
+ if (!smc->y[PB].cf_join || smc->y[PB].wc_flag) {
+ smc->y[PA].scrub = TRUE ;
+ GO_STATE(SC9_C_WRAP_A) ;
+ break ;
+ }
+ /*SC52*/
+ else if (!smc->y[PA].cf_join || smc->y[PA].wc_flag) {
+ smc->y[PB].scrub = TRUE ;
+ GO_STATE(SC10_C_WRAP_B) ;
+ break ;
+ }
+ /*SC54*/
+ else if (!smc->s.attach_s) {
+ smc->y[PA].scrub = TRUE ;
+ GO_STATE(SC4_THRU_A) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(SC11_C_WRAP_S) :
+ smc->mib.p[PS].fddiPORTCurrentPath = MIB_PATH_CONCATENATED ;
+ smc->mib.p[PS].fddiPORTMACPlacement = INDEX_MAC ;
+ smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_CON ;
+ config_mux(smc,MUX_WRAPS) ; /* configure PHY mux */
+ if (smc->y[PA].cf_loop || smc->y[PB].cf_loop) {
+ smc->r.rm_join = FALSE ;
+ smc->r.rm_loop = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_LOOP) ;/* signal RMT */
+ }
+ if (smc->y[PA].cf_join || smc->y[PB].cf_join) {
+ smc->r.rm_loop = FALSE ;
+ smc->r.rm_join = TRUE ;
+ queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+ }
+ ACTIONS_DONE() ;
+ DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+ break ;
+ case SC11_C_WRAP_S :
+ /*SC70*/
+ if ( !smc->y[PA].cf_join && !smc->y[PA].cf_loop &&
+ !smc->y[PB].cf_join && !smc->y[PB].cf_loop) {
+ GO_STATE(SC0_ISOLATED) ;
+ break ;
+ }
+ break ;
+ default:
+ SMT_PANIC(smc,SMT_E0106, SMT_E0106_MSG) ;
+ break;
+ }
+}
+
+/*
+ * get MAC's input Port
+ * return :
+ * PA or PB
+ */
+int cfm_get_mac_input(struct s_smc *smc)
+{
+ return (smc->mib.fddiSMTCF_State == SC10_C_WRAP_B ||
+ smc->mib.fddiSMTCF_State == SC5_THRU_B) ? PB : PA;
+}
+
+/*
+ * get MAC's output Port
+ * return :
+ * PA or PB
+ */
+int cfm_get_mac_output(struct s_smc *smc)
+{
+ return (smc->mib.fddiSMTCF_State == SC10_C_WRAP_B ||
+ smc->mib.fddiSMTCF_State == SC4_THRU_A) ? PB : PA;
+}
+
+static char path_iso[] = {
+ 0,0, 0,RES_PORT, 0,PA + INDEX_PORT, 0,PATH_ISO,
+ 0,0, 0,RES_MAC, 0,INDEX_MAC, 0,PATH_ISO,
+ 0,0, 0,RES_PORT, 0,PB + INDEX_PORT, 0,PATH_ISO
+} ;
+
+static char path_wrap_a[] = {
+ 0,0, 0,RES_PORT, 0,PA + INDEX_PORT, 0,PATH_PRIM,
+ 0,0, 0,RES_MAC, 0,INDEX_MAC, 0,PATH_PRIM,
+ 0,0, 0,RES_PORT, 0,PB + INDEX_PORT, 0,PATH_ISO
+} ;
+
+static char path_wrap_b[] = {
+ 0,0, 0,RES_PORT, 0,PB + INDEX_PORT, 0,PATH_PRIM,
+ 0,0, 0,RES_MAC, 0,INDEX_MAC, 0,PATH_PRIM,
+ 0,0, 0,RES_PORT, 0,PA + INDEX_PORT, 0,PATH_ISO
+} ;
+
+static char path_thru[] = {
+ 0,0, 0,RES_PORT, 0,PA + INDEX_PORT, 0,PATH_PRIM,
+ 0,0, 0,RES_MAC, 0,INDEX_MAC, 0,PATH_PRIM,
+ 0,0, 0,RES_PORT, 0,PB + INDEX_PORT, 0,PATH_PRIM
+} ;
+
+static char path_wrap_s[] = {
+ 0,0, 0,RES_PORT, 0,PS + INDEX_PORT, 0,PATH_PRIM,
+ 0,0, 0,RES_MAC, 0,INDEX_MAC, 0,PATH_PRIM,
+} ;
+
+static char path_iso_s[] = {
+ 0,0, 0,RES_PORT, 0,PS + INDEX_PORT, 0,PATH_ISO,
+ 0,0, 0,RES_MAC, 0,INDEX_MAC, 0,PATH_ISO,
+} ;
+
+int cem_build_path(struct s_smc *smc, char *to, int path_index)
+{
+ char *path ;
+ int len ;
+
+ switch (smc->mib.fddiSMTCF_State) {
+ default :
+ case SC0_ISOLATED :
+ path = smc->s.sas ? path_iso_s : path_iso ;
+ len = smc->s.sas ? sizeof(path_iso_s) : sizeof(path_iso) ;
+ break ;
+ case SC9_C_WRAP_A :
+ path = path_wrap_a ;
+ len = sizeof(path_wrap_a) ;
+ break ;
+ case SC10_C_WRAP_B :
+ path = path_wrap_b ;
+ len = sizeof(path_wrap_b) ;
+ break ;
+ case SC4_THRU_A :
+ path = path_thru ;
+ len = sizeof(path_thru) ;
+ break ;
+ case SC11_C_WRAP_S :
+ path = path_wrap_s ;
+ len = sizeof(path_wrap_s) ;
+ break ;
+ }
+ memcpy(to,path,len) ;
+
+ LINT_USE(path_index);
+
+ return len;
+}
diff --git a/drivers/net/fddi/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c
new file mode 100644
index 000000000..07da97c30
--- /dev/null
+++ b/drivers/net/fddi/skfp/drvfbi.c
@@ -0,0 +1,584 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * FBI board dependent Driver for SMT and LLC
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#include "h/skfbiinc.h"
+#include <linux/bitrev.h>
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ;
+#endif
+
+/*
+ * PCM active state
+ */
+#define PC8_ACTIVE 8
+
+#define LED_Y_ON 0x11 /* Used for ring up/down indication */
+#define LED_Y_OFF 0x10
+
+
+#define MS2BCLK(x) ((x)*12500L)
+
+/*
+ * valid configuration values are:
+ */
+
+/*
+ * xPOS_ID:xxxx
+ * | \ /
+ * | \/
+ * | --------------------- the patched POS_ID of the Adapter
+ * | xxxx = (Vendor ID low byte,
+ * | Vendor ID high byte,
+ * | Device ID low byte,
+ * | Device ID high byte)
+ * +------------------------------ the patched oem_id must be
+ * 'S' for SK or 'I' for IBM
+ * this is a short id for the driver.
+ */
+#ifndef MULT_OEM
+#ifndef OEM_CONCEPT
+const u_char oem_id[] = "xPOS_ID:xxxx" ;
+#else /* OEM_CONCEPT */
+const u_char oem_id[] = OEM_ID ;
+#endif /* OEM_CONCEPT */
+#define ID_BYTE0 8
+#define OEMID(smc,i) oem_id[ID_BYTE0 + i]
+#else /* MULT_OEM */
+const struct s_oem_ids oem_ids[] = {
+#include "oemids.h"
+{0}
+};
+#define OEMID(smc,i) smc->hw.oem_id->oi_id[i]
+#endif /* MULT_OEM */
+
+/* Prototypes of external functions */
+#ifdef AIX
+extern int AIX_vpdReadByte() ;
+#endif
+
+
+/* Prototype of a local function. */
+static void smt_stop_watchdog(struct s_smc *smc);
+
+/*
+ * FDDI card reset
+ */
+static void card_start(struct s_smc *smc)
+{
+ int i ;
+#ifdef PCI
+ u_char rev_id ;
+ u_short word;
+#endif
+
+ smt_stop_watchdog(smc) ;
+
+#ifdef PCI
+ /*
+ * make sure no transfer activity is pending
+ */
+ outpw(FM_A(FM_MDREG1),FM_MINIT) ;
+ outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+ hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ;
+ /*
+ * now reset everything
+ */
+ outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */
+ i = (int) inp(ADDR(B0_CTRL)) ; /* do dummy read */
+ SK_UNUSED(i) ; /* Make LINT happy. */
+ outp(ADDR(B0_CTRL), CTRL_RST_CLR) ;
+
+ /*
+ * Reset all bits in the PCI STATUS register
+ */
+ outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ; /* enable for writes */
+ word = inpw(PCI_C(PCI_STATUS)) ;
+ outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ;
+ outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ; /* disable writes */
+
+ /*
+ * Release the reset of all the State machines
+ * Release Master_Reset
+ * Release HPI_SM_Reset
+ */
+ outp(ADDR(B0_CTRL), CTRL_MRST_CLR|CTRL_HPI_CLR) ;
+
+ /*
+ * determine the adapter type
+ * Note: Do it here, because some drivers may call card_start() once
+ * at very first before any other initialization functions is
+ * executed.
+ */
+ rev_id = inp(PCI_C(PCI_REV_ID)) ;
+ if ((rev_id & 0xf0) == SK_ML_ID_1 || (rev_id & 0xf0) == SK_ML_ID_2) {
+ smc->hw.hw_is_64bit = TRUE ;
+ } else {
+ smc->hw.hw_is_64bit = FALSE ;
+ }
+
+ /*
+ * Watermark initialization
+ */
+ if (!smc->hw.hw_is_64bit) {
+ outpd(ADDR(B4_R1_F), RX_WATERMARK) ;
+ outpd(ADDR(B5_XA_F), TX_WATERMARK) ;
+ outpd(ADDR(B5_XS_F), TX_WATERMARK) ;
+ }
+
+ outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* clear the reset chips */
+ outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_ON|LED_GB_OFF) ; /* ye LED on */
+
+ /* init the timer value for the watch dog 2,5 minutes */
+ outpd(ADDR(B2_WDOG_INI),0x6FC23AC0) ;
+
+ /* initialize the ISR mask */
+ smc->hw.is_imask = ISR_MASK ;
+ smc->hw.hw_state = STOPPED ;
+#endif
+ GET_PAGE(0) ; /* necessary for BOOT */
+}
+
+void card_stop(struct s_smc *smc)
+{
+ smt_stop_watchdog(smc) ;
+ smc->hw.mac_ring_is_up = 0 ; /* ring down */
+
+#ifdef PCI
+ /*
+ * make sure no transfer activity is pending
+ */
+ outpw(FM_A(FM_MDREG1),FM_MINIT) ;
+ outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+ hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ;
+ /*
+ * now reset everything
+ */
+ outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */
+ outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* reset for all chips */
+ outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_OFF|LED_GB_OFF) ; /* all LEDs off */
+ smc->hw.hw_state = STOPPED ;
+#endif
+}
+/*--------------------------- ISR handling ----------------------------------*/
+
+void mac1_irq(struct s_smc *smc, u_short stu, u_short stl)
+{
+ int restart_tx = 0 ;
+again:
+
+ /*
+ * parity error: note encoding error is not possible in tag mode
+ */
+ if (stl & (FM_SPCEPDS | /* parity err. syn.q.*/
+ FM_SPCEPDA0 | /* parity err. a.q.0 */
+ FM_SPCEPDA1)) { /* parity err. a.q.1 */
+ SMT_PANIC(smc,SMT_E0134, SMT_E0134_MSG) ;
+ }
+ /*
+ * buffer underrun: can only occur if a tx threshold is specified
+ */
+ if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/
+ FM_STBURA0 | /* tx buffer underrun a.q.0 */
+ FM_STBURA1)) { /* tx buffer underrun a.q.2 */
+ SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ;
+ }
+
+ if ( (stu & (FM_SXMTABT | /* transmit abort */
+ FM_STXABRS | /* syn. tx abort */
+ FM_STXABRA0)) || /* asyn. tx abort */
+ (stl & (FM_SQLCKS | /* lock for syn. q. */
+ FM_SQLCKA0)) ) { /* lock for asyn. q. */
+ formac_tx_restart(smc) ; /* init tx */
+ restart_tx = 1 ;
+ stu = inpw(FM_A(FM_ST1U)) ;
+ stl = inpw(FM_A(FM_ST1L)) ;
+ stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ;
+ if (stu || stl)
+ goto again ;
+ }
+
+ if (stu & (FM_STEFRMA0 | /* end of asyn tx */
+ FM_STEFRMS)) { /* end of sync tx */
+ restart_tx = 1 ;
+ }
+
+ if (restart_tx)
+ llc_restart_tx(smc) ;
+}
+
+/*
+ * interrupt source= plc1
+ * this function is called in nwfbisr.asm
+ */
+void plc1_irq(struct s_smc *smc)
+{
+ u_short st = inpw(PLC(PB,PL_INTR_EVENT)) ;
+
+ plc_irq(smc,PB,st) ;
+}
+
+/*
+ * interrupt source= plc2
+ * this function is called in nwfbisr.asm
+ */
+void plc2_irq(struct s_smc *smc)
+{
+ u_short st = inpw(PLC(PA,PL_INTR_EVENT)) ;
+
+ plc_irq(smc,PA,st) ;
+}
+
+
+/*
+ * interrupt source= timer
+ */
+void timer_irq(struct s_smc *smc)
+{
+ hwt_restart(smc);
+ smc->hw.t_stop = smc->hw.t_start;
+ smt_timer_done(smc) ;
+}
+
+/*
+ * return S-port (PA or PB)
+ */
+int pcm_get_s_port(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ;
+ return PS;
+}
+
+/*
+ * Station Label = "FDDI-XYZ" where
+ *
+ * X = connector type
+ * Y = PMD type
+ * Z = port type
+ */
+#define STATION_LABEL_CONNECTOR_OFFSET 5
+#define STATION_LABEL_PMD_OFFSET 6
+#define STATION_LABEL_PORT_OFFSET 7
+
+void read_address(struct s_smc *smc, u_char *mac_addr)
+{
+ char ConnectorType ;
+ char PmdType ;
+ int i ;
+
+#ifdef PCI
+ for (i = 0; i < 6; i++) { /* read mac address from board */
+ smc->hw.fddi_phys_addr.a[i] =
+ bitrev8(inp(ADDR(B2_MAC_0+i)));
+ }
+#endif
+
+ ConnectorType = inp(ADDR(B2_CONN_TYP)) ;
+ PmdType = inp(ADDR(B2_PMD_TYP)) ;
+
+ smc->y[PA].pmd_type[PMD_SK_CONN] =
+ smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ;
+ smc->y[PA].pmd_type[PMD_SK_PMD ] =
+ smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ;
+
+ if (mac_addr) {
+ for (i = 0; i < 6 ;i++) {
+ smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ;
+ smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]);
+ }
+ return ;
+ }
+ smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ;
+
+ for (i = 0; i < 6 ;i++) {
+ smc->hw.fddi_canon_addr.a[i] =
+ bitrev8(smc->hw.fddi_phys_addr.a[i]);
+ }
+}
+
+/*
+ * FDDI card soft reset
+ */
+void init_board(struct s_smc *smc, u_char *mac_addr)
+{
+ card_start(smc) ;
+ read_address(smc,mac_addr) ;
+
+ if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL))
+ smc->s.sas = SMT_SAS ; /* Single att. station */
+ else
+ smc->s.sas = SMT_DAS ; /* Dual att. station */
+
+ if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST))
+ smc->mib.fddiSMTBypassPresent = 0 ;
+ /* without opt. bypass */
+ else
+ smc->mib.fddiSMTBypassPresent = 1 ;
+ /* with opt. bypass */
+}
+
+/*
+ * insert or deinsert optical bypass (called by ECM)
+ */
+void sm_pm_bypass_req(struct s_smc *smc, int mode)
+{
+ DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ?
+ "BP_INSERT" : "BP_DEINSERT",0) ;
+
+ if (smc->s.sas != SMT_DAS)
+ return ;
+
+#ifdef PCI
+ switch(mode) {
+ case BP_INSERT :
+ outp(ADDR(B0_DAS),DAS_BYP_INS) ; /* insert station */
+ break ;
+ case BP_DEINSERT :
+ outp(ADDR(B0_DAS),DAS_BYP_RMV) ; /* bypass station */
+ break ;
+ }
+#endif
+}
+
+/*
+ * check if bypass connected
+ */
+int sm_pm_bypass_present(struct s_smc *smc)
+{
+ return (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE : FALSE;
+}
+
+void plc_clear_irq(struct s_smc *smc, int p)
+{
+ SK_UNUSED(p) ;
+
+ SK_UNUSED(smc) ;
+}
+
+
+/*
+ * led_indication called by rmt_indication() and
+ * pcm_state_change()
+ *
+ * Input:
+ * smc: SMT context
+ * led_event:
+ * 0 Only switch green LEDs according to their respective PCM state
+ * LED_Y_OFF just switch yellow LED off
+ * LED_Y_ON just switch yello LED on
+ */
+static void led_indication(struct s_smc *smc, int led_event)
+{
+ /* use smc->hw.mac_ring_is_up == TRUE
+ * as indication for Ring Operational
+ */
+ u_short led_state ;
+ struct s_phy *phy ;
+ struct fddi_mib_p *mib_a ;
+ struct fddi_mib_p *mib_b ;
+
+ phy = &smc->y[PA] ;
+ mib_a = phy->mib ;
+ phy = &smc->y[PB] ;
+ mib_b = phy->mib ;
+
+#ifdef PCI
+ led_state = 0 ;
+
+ /* Ring up = yellow led OFF*/
+ if (led_event == LED_Y_ON) {
+ led_state |= LED_MY_ON ;
+ }
+ else if (led_event == LED_Y_OFF) {
+ led_state |= LED_MY_OFF ;
+ }
+ else { /* PCM state changed */
+ /* Link at Port A/S = green led A ON */
+ if (mib_a->fddiPORTPCMState == PC8_ACTIVE) {
+ led_state |= LED_GA_ON ;
+ }
+ else {
+ led_state |= LED_GA_OFF ;
+ }
+
+ /* Link at Port B = green led B ON */
+ if (mib_b->fddiPORTPCMState == PC8_ACTIVE) {
+ led_state |= LED_GB_ON ;
+ }
+ else {
+ led_state |= LED_GB_OFF ;
+ }
+ }
+
+ outp(ADDR(B0_LED), led_state) ;
+#endif /* PCI */
+
+}
+
+
+void pcm_state_change(struct s_smc *smc, int plc, int p_state)
+{
+ /*
+ * the current implementation of pcm_state_change() in the driver
+ * parts must be renamed to drv_pcm_state_change() which will be called
+ * now after led_indication.
+ */
+ DRV_PCM_STATE_CHANGE(smc,plc,p_state) ;
+
+ led_indication(smc,0) ;
+}
+
+
+void rmt_indication(struct s_smc *smc, int i)
+{
+ /* Call a driver special function if defined */
+ DRV_RMT_INDICATION(smc,i) ;
+
+ led_indication(smc, i ? LED_Y_OFF : LED_Y_ON) ;
+}
+
+
+/*
+ * llc_recover_tx called by init_tx (fplus.c)
+ */
+void llc_recover_tx(struct s_smc *smc)
+{
+#ifdef LOAD_GEN
+ extern int load_gen_flag ;
+
+ load_gen_flag = 0 ;
+#endif
+#ifndef SYNC
+ smc->hw.n_a_send= 0 ;
+#else
+ SK_UNUSED(smc) ;
+#endif
+}
+
+#ifdef MULT_OEM
+static int is_equal_num(char comp1[], char comp2[], int num)
+{
+ int i ;
+
+ for (i = 0 ; i < num ; i++) {
+ if (comp1[i] != comp2[i])
+ return 0;
+ }
+ return 1;
+} /* is_equal_num */
+
+
+/*
+ * set the OEM ID defaults, and test the contents of the OEM data base
+ * The default OEM is the first ACTIVE entry in the OEM data base
+ *
+ * returns: 0 success
+ * 1 error in data base
+ * 2 data base empty
+ * 3 no active entry
+ */
+int set_oi_id_def(struct s_smc *smc)
+{
+ int sel_id ;
+ int i ;
+ int act_entries ;
+
+ i = 0 ;
+ sel_id = -1 ;
+ act_entries = FALSE ;
+ smc->hw.oem_id = 0 ;
+ smc->hw.oem_min_status = OI_STAT_ACTIVE ;
+
+ /* check OEM data base */
+ while (oem_ids[i].oi_status) {
+ switch (oem_ids[i].oi_status) {
+ case OI_STAT_ACTIVE:
+ act_entries = TRUE ; /* we have active IDs */
+ if (sel_id == -1)
+ sel_id = i ; /* save the first active ID */
+ case OI_STAT_VALID:
+ case OI_STAT_PRESENT:
+ i++ ;
+ break ; /* entry ok */
+ default:
+ return 1; /* invalid oi_status */
+ }
+ }
+
+ if (i == 0)
+ return 2;
+ if (!act_entries)
+ return 3;
+
+ /* ok, we have a valid OEM data base with an active entry */
+ smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[sel_id] ;
+ return 0;
+}
+#endif /* MULT_OEM */
+
+void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr)
+{
+ int i ;
+
+ for (i = 0 ; i < 6 ; i++)
+ bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]);
+}
+
+void smt_start_watchdog(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ; /* Make LINT happy. */
+
+#ifndef DEBUG
+
+#ifdef PCI
+ if (smc->hw.wdog_used) {
+ outpw(ADDR(B2_WDOG_CRTL),TIM_START) ; /* Start timer. */
+ }
+#endif
+
+#endif /* DEBUG */
+}
+
+static void smt_stop_watchdog(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ; /* Make LINT happy. */
+#ifndef DEBUG
+
+#ifdef PCI
+ if (smc->hw.wdog_used) {
+ outpw(ADDR(B2_WDOG_CRTL),TIM_STOP) ; /* Stop timer. */
+ }
+#endif
+
+#endif /* DEBUG */
+}
+
+#ifdef PCI
+
+void mac_do_pci_fix(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ;
+}
+#endif /* PCI */
+
diff --git a/drivers/net/fddi/skfp/ecm.c b/drivers/net/fddi/skfp/ecm.c
new file mode 100644
index 000000000..47d922cb3
--- /dev/null
+++ b/drivers/net/fddi/skfp/ecm.c
@@ -0,0 +1,536 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ SMT ECM
+ Entity Coordination Management
+ Hardware independent state machine
+*/
+
+/*
+ * Hardware independent state machine implemantation
+ * The following external SMT functions are referenced :
+ *
+ * queue_event()
+ * smt_timer_start()
+ * smt_timer_stop()
+ *
+ * The following external HW dependent functions are referenced :
+ * sm_pm_bypass_req()
+ * sm_pm_ls_latch()
+ * sm_pm_get_ls()
+ *
+ * The following HW dependent events are required :
+ * NONE
+ *
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)ecm.c 2.7 99/08/05 (C) SK " ;
+#endif
+
+/*
+ * FSM Macros
+ */
+#define AFLAG 0x10
+#define GO_STATE(x) (smc->mib.fddiSMTECMState = (x)|AFLAG)
+#define ACTIONS_DONE() (smc->mib.fddiSMTECMState &= ~AFLAG)
+#define ACTIONS(x) (x|AFLAG)
+
+#define EC0_OUT 0 /* not inserted */
+#define EC1_IN 1 /* inserted */
+#define EC2_TRACE 2 /* tracing */
+#define EC3_LEAVE 3 /* leaving the ring */
+#define EC4_PATH_TEST 4 /* performing path test */
+#define EC5_INSERT 5 /* bypass being turned on */
+#define EC6_CHECK 6 /* checking bypass */
+#define EC7_DEINSERT 7 /* bypass being turnde off */
+
+#ifdef DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const ecm_states[] = {
+ "EC0_OUT","EC1_IN","EC2_TRACE","EC3_LEAVE","EC4_PATH_TEST",
+ "EC5_INSERT","EC6_CHECK","EC7_DEINSERT"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const ecm_events[] = {
+ "NONE","EC_CONNECT","EC_DISCONNECT","EC_TRACE_PROP","EC_PATH_TEST",
+ "EC_TIMEOUT_TD","EC_TIMEOUT_TMAX",
+ "EC_TIMEOUT_IMAX","EC_TIMEOUT_INMAX","EC_TEST_DONE"
+} ;
+#endif
+
+/*
+ * all Globals are defined in smc.h
+ * struct s_ecm
+ */
+
+/*
+ * function declarations
+ */
+
+static void ecm_fsm(struct s_smc *smc, int cmd);
+static void start_ecm_timer(struct s_smc *smc, u_long value, int event);
+static void stop_ecm_timer(struct s_smc *smc);
+static void prop_actions(struct s_smc *smc);
+
+/*
+ init ECM state machine
+ clear all ECM vars and flags
+*/
+void ecm_init(struct s_smc *smc)
+{
+ smc->e.path_test = PT_PASSED ;
+ smc->e.trace_prop = 0 ;
+ smc->e.sb_flag = 0 ;
+ smc->mib.fddiSMTECMState = ACTIONS(EC0_OUT) ;
+ smc->e.ecm_line_state = FALSE ;
+}
+
+/*
+ ECM state machine
+ called by dispatcher
+
+ do
+ display state change
+ process event
+ until SM is stable
+*/
+void ecm(struct s_smc *smc, int event)
+{
+ int state ;
+
+ do {
+ DB_ECM("ECM : state %s%s",
+ (smc->mib.fddiSMTECMState & AFLAG) ? "ACTIONS " : "",
+ ecm_states[smc->mib.fddiSMTECMState & ~AFLAG]) ;
+ DB_ECM(" event %s\n",ecm_events[event],0) ;
+ state = smc->mib.fddiSMTECMState ;
+ ecm_fsm(smc,event) ;
+ event = 0 ;
+ } while (state != smc->mib.fddiSMTECMState) ;
+ ecm_state_change(smc,(int)smc->mib.fddiSMTECMState) ;
+}
+
+/*
+ process ECM event
+*/
+static void ecm_fsm(struct s_smc *smc, int cmd)
+{
+ int ls_a ; /* current line state PHY A */
+ int ls_b ; /* current line state PHY B */
+ int p ; /* ports */
+
+
+ smc->mib.fddiSMTBypassPresent = sm_pm_bypass_present(smc) ;
+ if (cmd == EC_CONNECT)
+ smc->mib.fddiSMTRemoteDisconnectFlag = FALSE ;
+
+ /* For AIX event notification: */
+ /* Is a disconnect command remotely issued ? */
+ if (cmd == EC_DISCONNECT &&
+ smc->mib.fddiSMTRemoteDisconnectFlag == TRUE)
+ AIX_EVENT (smc, (u_long) CIO_HARD_FAIL, (u_long)
+ FDDI_REMOTE_DISCONNECT, smt_get_event_word(smc),
+ smt_get_error_word(smc) );
+
+ /*jd 05-Aug-1999 Bug #10419 "Port Disconnect fails at Dup MAc Cond."*/
+ if (cmd == EC_CONNECT) {
+ smc->e.DisconnectFlag = FALSE ;
+ }
+ else if (cmd == EC_DISCONNECT) {
+ smc->e.DisconnectFlag = TRUE ;
+ }
+
+ switch(smc->mib.fddiSMTECMState) {
+ case ACTIONS(EC0_OUT) :
+ /*
+ * We do not perform a path test
+ */
+ smc->e.path_test = PT_PASSED ;
+ smc->e.ecm_line_state = FALSE ;
+ stop_ecm_timer(smc) ;
+ ACTIONS_DONE() ;
+ break ;
+ case EC0_OUT:
+ /*EC01*/
+ if (cmd == EC_CONNECT && !smc->mib.fddiSMTBypassPresent
+ && smc->e.path_test==PT_PASSED) {
+ GO_STATE(EC1_IN) ;
+ break ;
+ }
+ /*EC05*/
+ else if (cmd == EC_CONNECT && (smc->e.path_test==PT_PASSED) &&
+ smc->mib.fddiSMTBypassPresent &&
+ (smc->s.sas == SMT_DAS)) {
+ GO_STATE(EC5_INSERT) ;
+ break ;
+ }
+ break;
+ case ACTIONS(EC1_IN) :
+ stop_ecm_timer(smc) ;
+ smc->e.trace_prop = 0 ;
+ sm_ma_control(smc,MA_TREQ) ;
+ for (p = 0 ; p < NUMPHYS ; p++)
+ if (smc->mib.p[p].fddiPORTHardwarePresent)
+ queue_event(smc,EVENT_PCMA+p,PC_START) ;
+ ACTIONS_DONE() ;
+ break ;
+ case EC1_IN:
+ /*EC12*/
+ if (cmd == EC_TRACE_PROP) {
+ prop_actions(smc) ;
+ GO_STATE(EC2_TRACE) ;
+ break ;
+ }
+ /*EC13*/
+ else if (cmd == EC_DISCONNECT) {
+ GO_STATE(EC3_LEAVE) ;
+ break ;
+ }
+ break;
+ case ACTIONS(EC2_TRACE) :
+ start_ecm_timer(smc,MIB2US(smc->mib.fddiSMTTrace_MaxExpiration),
+ EC_TIMEOUT_TMAX) ;
+ ACTIONS_DONE() ;
+ break ;
+ case EC2_TRACE :
+ /*EC22*/
+ if (cmd == EC_TRACE_PROP) {
+ prop_actions(smc) ;
+ GO_STATE(EC2_TRACE) ;
+ break ;
+ }
+ /*EC23a*/
+ else if (cmd == EC_DISCONNECT) {
+ smc->e.path_test = PT_EXITING ;
+ GO_STATE(EC3_LEAVE) ;
+ break ;
+ }
+ /*EC23b*/
+ else if (smc->e.path_test == PT_PENDING) {
+ GO_STATE(EC3_LEAVE) ;
+ break ;
+ }
+ /*EC23c*/
+ else if (cmd == EC_TIMEOUT_TMAX) {
+ /* Trace_Max is expired */
+ /* -> send AIX_EVENT */
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS,
+ (u_long) FDDI_SMT_ERROR, (u_long)
+ FDDI_TRACE_MAX, smt_get_error_word(smc));
+ smc->e.path_test = PT_PENDING ;
+ GO_STATE(EC3_LEAVE) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(EC3_LEAVE) :
+ start_ecm_timer(smc,smc->s.ecm_td_min,EC_TIMEOUT_TD) ;
+ for (p = 0 ; p < NUMPHYS ; p++)
+ queue_event(smc,EVENT_PCMA+p,PC_STOP) ;
+ ACTIONS_DONE() ;
+ break ;
+ case EC3_LEAVE:
+ /*EC30*/
+ if (cmd == EC_TIMEOUT_TD && !smc->mib.fddiSMTBypassPresent &&
+ (smc->e.path_test != PT_PENDING)) {
+ GO_STATE(EC0_OUT) ;
+ break ;
+ }
+ /*EC34*/
+ else if (cmd == EC_TIMEOUT_TD &&
+ (smc->e.path_test == PT_PENDING)) {
+ GO_STATE(EC4_PATH_TEST) ;
+ break ;
+ }
+ /*EC31*/
+ else if (cmd == EC_CONNECT && smc->e.path_test == PT_PASSED) {
+ GO_STATE(EC1_IN) ;
+ break ;
+ }
+ /*EC33*/
+ else if (cmd == EC_DISCONNECT &&
+ smc->e.path_test == PT_PENDING) {
+ smc->e.path_test = PT_EXITING ;
+ /*
+ * stay in state - state will be left via timeout
+ */
+ }
+ /*EC37*/
+ else if (cmd == EC_TIMEOUT_TD &&
+ smc->mib.fddiSMTBypassPresent &&
+ smc->e.path_test != PT_PENDING) {
+ GO_STATE(EC7_DEINSERT) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(EC4_PATH_TEST) :
+ stop_ecm_timer(smc) ;
+ smc->e.path_test = PT_TESTING ;
+ start_ecm_timer(smc,smc->s.ecm_test_done,EC_TEST_DONE) ;
+ /* now perform path test ... just a simulation */
+ ACTIONS_DONE() ;
+ break ;
+ case EC4_PATH_TEST :
+ /* path test done delay */
+ if (cmd == EC_TEST_DONE)
+ smc->e.path_test = PT_PASSED ;
+
+ if (smc->e.path_test == PT_FAILED)
+ RS_SET(smc,RS_PATHTEST) ;
+
+ /*EC40a*/
+ if (smc->e.path_test == PT_FAILED &&
+ !smc->mib.fddiSMTBypassPresent) {
+ GO_STATE(EC0_OUT) ;
+ break ;
+ }
+ /*EC40b*/
+ else if (cmd == EC_DISCONNECT &&
+ !smc->mib.fddiSMTBypassPresent) {
+ GO_STATE(EC0_OUT) ;
+ break ;
+ }
+ /*EC41*/
+ else if (smc->e.path_test == PT_PASSED) {
+ GO_STATE(EC1_IN) ;
+ break ;
+ }
+ /*EC47a*/
+ else if (smc->e.path_test == PT_FAILED &&
+ smc->mib.fddiSMTBypassPresent) {
+ GO_STATE(EC7_DEINSERT) ;
+ break ;
+ }
+ /*EC47b*/
+ else if (cmd == EC_DISCONNECT &&
+ smc->mib.fddiSMTBypassPresent) {
+ GO_STATE(EC7_DEINSERT) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(EC5_INSERT) :
+ sm_pm_bypass_req(smc,BP_INSERT);
+ start_ecm_timer(smc,smc->s.ecm_in_max,EC_TIMEOUT_INMAX) ;
+ ACTIONS_DONE() ;
+ break ;
+ case EC5_INSERT :
+ /*EC56*/
+ if (cmd == EC_TIMEOUT_INMAX) {
+ GO_STATE(EC6_CHECK) ;
+ break ;
+ }
+ /*EC57*/
+ else if (cmd == EC_DISCONNECT) {
+ GO_STATE(EC7_DEINSERT) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(EC6_CHECK) :
+ /*
+ * in EC6_CHECK, we *POLL* the line state !
+ * check whether both bypass switches have switched.
+ */
+ start_ecm_timer(smc,smc->s.ecm_check_poll,0) ;
+ smc->e.ecm_line_state = TRUE ; /* flag to pcm: report Q/HLS */
+ (void) sm_pm_ls_latch(smc,PA,1) ; /* enable line state latch */
+ (void) sm_pm_ls_latch(smc,PB,1) ; /* enable line state latch */
+ ACTIONS_DONE() ;
+ break ;
+ case EC6_CHECK :
+ ls_a = sm_pm_get_ls(smc,PA) ;
+ ls_b = sm_pm_get_ls(smc,PB) ;
+
+ /*EC61*/
+ if (((ls_a == PC_QLS) || (ls_a == PC_HLS)) &&
+ ((ls_b == PC_QLS) || (ls_b == PC_HLS)) ) {
+ smc->e.sb_flag = FALSE ;
+ smc->e.ecm_line_state = FALSE ;
+ GO_STATE(EC1_IN) ;
+ break ;
+ }
+ /*EC66*/
+ else if (!smc->e.sb_flag &&
+ (((ls_a == PC_ILS) && (ls_b == PC_QLS)) ||
+ ((ls_a == PC_QLS) && (ls_b == PC_ILS)))){
+ smc->e.sb_flag = TRUE ;
+ DB_ECMN(1,"ECM : EC6_CHECK - stuck bypass\n",0,0) ;
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+ FDDI_SMT_ERROR, (u_long) FDDI_BYPASS_STUCK,
+ smt_get_error_word(smc));
+ }
+ /*EC67*/
+ else if (cmd == EC_DISCONNECT) {
+ smc->e.ecm_line_state = FALSE ;
+ GO_STATE(EC7_DEINSERT) ;
+ break ;
+ }
+ else {
+ /*
+ * restart poll
+ */
+ start_ecm_timer(smc,smc->s.ecm_check_poll,0) ;
+ }
+ break ;
+ case ACTIONS(EC7_DEINSERT) :
+ sm_pm_bypass_req(smc,BP_DEINSERT);
+ start_ecm_timer(smc,smc->s.ecm_i_max,EC_TIMEOUT_IMAX) ;
+ ACTIONS_DONE() ;
+ break ;
+ case EC7_DEINSERT:
+ /*EC70*/
+ if (cmd == EC_TIMEOUT_IMAX) {
+ GO_STATE(EC0_OUT) ;
+ break ;
+ }
+ /*EC75*/
+ else if (cmd == EC_CONNECT && smc->e.path_test == PT_PASSED) {
+ GO_STATE(EC5_INSERT) ;
+ break ;
+ }
+ break;
+ default:
+ SMT_PANIC(smc,SMT_E0107, SMT_E0107_MSG) ;
+ break;
+ }
+}
+
+#ifndef CONCENTRATOR
+/*
+ * trace propagation actions for SAS & DAS
+ */
+static void prop_actions(struct s_smc *smc)
+{
+ int port_in = 0 ;
+ int port_out = 0 ;
+
+ RS_SET(smc,RS_EVENT) ;
+ switch (smc->s.sas) {
+ case SMT_SAS :
+ port_in = port_out = pcm_get_s_port(smc) ;
+ break ;
+ case SMT_DAS :
+ port_in = cfm_get_mac_input(smc) ; /* PA or PB */
+ port_out = cfm_get_mac_output(smc) ; /* PA or PB */
+ break ;
+ case SMT_NAC :
+ SMT_PANIC(smc,SMT_E0108, SMT_E0108_MSG) ;
+ return ;
+ }
+
+ DB_ECM("ECM : prop_actions - trace_prop %d\n", smc->e.trace_prop,0) ;
+ DB_ECM("ECM : prop_actions - in %d out %d\n", port_in,port_out) ;
+
+ if (smc->e.trace_prop & ENTITY_BIT(ENTITY_MAC)) {
+ /* trace initiatior */
+ DB_ECM("ECM : initiate TRACE on PHY %c\n",'A'+port_in-PA,0) ;
+ queue_event(smc,EVENT_PCM+port_in,PC_TRACE) ;
+ }
+ else if ((smc->e.trace_prop & ENTITY_BIT(ENTITY_PHY(PA))) &&
+ port_out != PA) {
+ /* trace propagate upstream */
+ DB_ECM("ECM : propagate TRACE on PHY B\n",0,0) ;
+ queue_event(smc,EVENT_PCMB,PC_TRACE) ;
+ }
+ else if ((smc->e.trace_prop & ENTITY_BIT(ENTITY_PHY(PB))) &&
+ port_out != PB) {
+ /* trace propagate upstream */
+ DB_ECM("ECM : propagate TRACE on PHY A\n",0,0) ;
+ queue_event(smc,EVENT_PCMA,PC_TRACE) ;
+ }
+ else {
+ /* signal trace termination */
+ DB_ECM("ECM : TRACE terminated\n",0,0) ;
+ smc->e.path_test = PT_PENDING ;
+ }
+ smc->e.trace_prop = 0 ;
+}
+#else
+/*
+ * trace propagation actions for Concentrator
+ */
+static void prop_actions(struct s_smc *smc)
+{
+ int initiator ;
+ int upstream ;
+ int p ;
+
+ RS_SET(smc,RS_EVENT) ;
+ while (smc->e.trace_prop) {
+ DB_ECM("ECM : prop_actions - trace_prop %d\n",
+ smc->e.trace_prop,0) ;
+
+ if (smc->e.trace_prop & ENTITY_BIT(ENTITY_MAC)) {
+ initiator = ENTITY_MAC ;
+ smc->e.trace_prop &= ~ENTITY_BIT(ENTITY_MAC) ;
+ DB_ECM("ECM: MAC initiates trace\n",0,0) ;
+ }
+ else {
+ for (p = NUMPHYS-1 ; p >= 0 ; p--) {
+ if (smc->e.trace_prop &
+ ENTITY_BIT(ENTITY_PHY(p)))
+ break ;
+ }
+ initiator = ENTITY_PHY(p) ;
+ smc->e.trace_prop &= ~ENTITY_BIT(ENTITY_PHY(p)) ;
+ }
+ upstream = cem_get_upstream(smc,initiator) ;
+
+ if (upstream == ENTITY_MAC) {
+ /* signal trace termination */
+ DB_ECM("ECM : TRACE terminated\n",0,0) ;
+ smc->e.path_test = PT_PENDING ;
+ }
+ else {
+ /* trace propagate upstream */
+ DB_ECM("ECM : propagate TRACE on PHY %d\n",upstream,0) ;
+ queue_event(smc,EVENT_PCM+upstream,PC_TRACE) ;
+ }
+ }
+}
+#endif
+
+
+/*
+ * SMT timer interface
+ * start ECM timer
+ */
+static void start_ecm_timer(struct s_smc *smc, u_long value, int event)
+{
+ smt_timer_start(smc,&smc->e.ecm_timer,value,EV_TOKEN(EVENT_ECM,event));
+}
+
+/*
+ * SMT timer interface
+ * stop ECM timer
+ */
+static void stop_ecm_timer(struct s_smc *smc)
+{
+ if (smc->e.ecm_timer.tm_active)
+ smt_timer_stop(smc,&smc->e.ecm_timer) ;
+}
diff --git a/drivers/net/fddi/skfp/ess.c b/drivers/net/fddi/skfp/ess.c
new file mode 100644
index 000000000..2fc5987b4
--- /dev/null
+++ b/drivers/net/fddi/skfp/ess.c
@@ -0,0 +1,720 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * *******************************************************************
+ * This SBA code implements the Synchronous Bandwidth Allocation
+ * functions described in the "FDDI Synchronous Forum Implementer's
+ * Agreement" dated December 1th, 1993.
+ * *******************************************************************
+ *
+ * PURPOSE: The purpose of this function is to control
+ * synchronous allocations on a single FDDI segment.
+ * Allocations are limited to the primary FDDI ring.
+ * The SBM provides recovery mechanisms to recover
+ * unused bandwidth also resolves T_Neg and
+ * reconfiguration changes. Many of the SBM state
+ * machine inputs are sourced by the underlying
+ * FDDI sub-system supporting the SBA application.
+ *
+ * *******************************************************************
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+
+
+#ifndef SLIM_SMT
+
+#ifdef ESS
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)ess.c 1.10 96/02/23 (C) SK" ;
+#define LINT_USE(x)
+#else
+#define LINT_USE(x) (x)=(x)
+#endif
+#define MS2BCLK(x) ((x)*12500L)
+
+/*
+ -------------------------------------------------------------
+ LOCAL VARIABLES:
+ -------------------------------------------------------------
+*/
+
+static const u_short plist_raf_alc_res[] = { SMT_P0012, SMT_P320B, SMT_P320F,
+ SMT_P3210, SMT_P0019, SMT_P001A,
+ SMT_P001D, 0 } ;
+
+static const u_short plist_raf_chg_req[] = { SMT_P320B, SMT_P320F, SMT_P3210,
+ SMT_P001A, 0 } ;
+
+static const struct fddi_addr smt_sba_da = {{0x80,0x01,0x43,0x00,0x80,0x0C}} ;
+static const struct fddi_addr null_addr = {{0,0,0,0,0,0}} ;
+
+/*
+ -------------------------------------------------------------
+ GLOBAL VARIABLES:
+ -------------------------------------------------------------
+*/
+
+
+/*
+ -------------------------------------------------------------
+ LOCAL FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
+ int sba_cmd);
+static void ess_config_fifo(struct s_smc *smc);
+static void ess_send_alc_req(struct s_smc *smc);
+static void ess_send_frame(struct s_smc *smc, SMbuf *mb);
+
+/*
+ -------------------------------------------------------------
+ EXTERNAL FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+/*
+ -------------------------------------------------------------
+ PUBLIC FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+void ess_timer_poll(struct s_smc *smc);
+void ess_para_change(struct s_smc *smc);
+int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
+ int fs);
+static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead);
+
+
+/*
+ * --------------------------------------------------------------------------
+ * End Station Support (ESS)
+ * --------------------------------------------------------------------------
+ */
+
+/*
+ * evaluate the RAF frame
+ */
+int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
+ int fs)
+{
+ void *p ; /* universal pointer */
+ struct smt_p_0016 *cmd ; /* para: command for the ESS */
+ SMbuf *db ;
+ u_long msg_res_type ; /* recource type */
+ u_long payload, overhead ;
+ int local ;
+ int i ;
+
+ /*
+ * Message Processing Code
+ */
+ local = ((fs & L_INDICATOR) != 0) ;
+
+ /*
+ * get the resource type
+ */
+ if (!(p = (void *) sm_to_para(smc,sm,SMT_P0015))) {
+ DB_ESS("ESS: RAF frame error, parameter type not found\n",0,0) ;
+ return fs;
+ }
+ msg_res_type = ((struct smt_p_0015 *)p)->res_type ;
+
+ /*
+ * get the pointer to the ESS command
+ */
+ if (!(cmd = (struct smt_p_0016 *) sm_to_para(smc,sm,SMT_P0016))) {
+ /*
+ * error in frame: para ESS command was not found
+ */
+ DB_ESS("ESS: RAF frame error, parameter command not found\n",0,0);
+ return fs;
+ }
+
+ DB_ESSN(2,"fc %x ft %x\n",sm->smt_class,sm->smt_type) ;
+ DB_ESSN(2,"ver %x tran %lx\n",sm->smt_version,sm->smt_tid) ;
+ DB_ESSN(2,"stn_id %s\n",addr_to_string(&sm->smt_source),0) ;
+
+ DB_ESSN(2,"infolen %x res %x\n",sm->smt_len, msg_res_type) ;
+ DB_ESSN(2,"sbacmd %x\n",cmd->sba_cmd,0) ;
+
+ /*
+ * evaluate the ESS command
+ */
+ switch (cmd->sba_cmd) {
+
+ /*
+ * Process an ESS Allocation Request
+ */
+ case REQUEST_ALLOCATION :
+ /*
+ * check for an RAF Request (Allocation Request)
+ */
+ if (sm->smt_type == SMT_REQUEST) {
+ /*
+ * process the Allocation request only if the frame is
+ * local and no static allocation is used
+ */
+ if (!local || smc->mib.fddiESSPayload)
+ return fs;
+
+ p = (void *) sm_to_para(smc,sm,SMT_P0019) ;
+ for (i = 0; i < 5; i++) {
+ if (((struct smt_p_0019 *)p)->alloc_addr.a[i]) {
+ return fs;
+ }
+ }
+
+ /*
+ * Note: The Application should send a LAN_LOC_FRAME.
+ * The ESS do not send the Frame to the network!
+ */
+ smc->ess.alloc_trans_id = sm->smt_tid ;
+ DB_ESS("ESS: save Alloc Req Trans ID %lx\n",sm->smt_tid,0);
+ p = (void *) sm_to_para(smc,sm,SMT_P320F) ;
+ ((struct smt_p_320f *)p)->mib_payload =
+ smc->mib.a[PATH0].fddiPATHSbaPayload ;
+ p = (void *) sm_to_para(smc,sm,SMT_P3210) ;
+ ((struct smt_p_3210 *)p)->mib_overhead =
+ smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+ sm->smt_dest = smt_sba_da ;
+
+ if (smc->ess.local_sba_active)
+ return fs | I_INDICATOR;
+
+ if (!(db = smt_get_mbuf(smc)))
+ return fs;
+
+ db->sm_len = mb->sm_len ;
+ db->sm_off = mb->sm_off ;
+ memcpy(((char *)(db->sm_data+db->sm_off)),(char *)sm,
+ (int)db->sm_len) ;
+ dump_smt(smc,
+ (struct smt_header *)(db->sm_data+db->sm_off),
+ "RAF") ;
+ smt_send_frame(smc,db,FC_SMT_INFO,0) ;
+ return fs;
+ }
+
+ /*
+ * The RAF frame is an Allocation Response !
+ * check the parameters
+ */
+ if (smt_check_para(smc,sm,plist_raf_alc_res)) {
+ DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ;
+ return fs;
+ }
+
+ /*
+ * VERIFY THE FRAME IS WELL BUILT:
+ *
+ * 1. path index = primary ring only
+ * 2. resource type = sync bw only
+ * 3. trans action id = alloc_trans_id
+ * 4. reason code = success
+ *
+ * If any are violated, discard the RAF frame
+ */
+ if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index
+ != PRIMARY_RING) ||
+ (msg_res_type != SYNC_BW) ||
+ (((struct smt_p_reason *)sm_to_para(smc,sm,SMT_P0012))->rdf_reason
+ != SMT_RDF_SUCCESS) ||
+ (sm->smt_tid != smc->ess.alloc_trans_id)) {
+
+ DB_ESS("ESS: Allocation Response not accepted\n",0,0) ;
+ return fs;
+ }
+
+ /*
+ * Extract message parameters
+ */
+ p = (void *) sm_to_para(smc,sm,SMT_P320F) ;
+ if (!p) {
+ printk(KERN_ERR "ESS: sm_to_para failed");
+ return fs;
+ }
+ payload = ((struct smt_p_320f *)p)->mib_payload ;
+ p = (void *) sm_to_para(smc,sm,SMT_P3210) ;
+ if (!p) {
+ printk(KERN_ERR "ESS: sm_to_para failed");
+ return fs;
+ }
+ overhead = ((struct smt_p_3210 *)p)->mib_overhead ;
+
+ DB_ESSN(2,"payload= %lx overhead= %lx\n",payload,overhead) ;
+
+ /*
+ * process the bandwidth allocation
+ */
+ (void)process_bw_alloc(smc,(long)payload,(long)overhead) ;
+
+ return fs;
+ /* end of Process Allocation Request */
+
+ /*
+ * Process an ESS Change Request
+ */
+ case CHANGE_ALLOCATION :
+ /*
+ * except only replies
+ */
+ if (sm->smt_type != SMT_REQUEST) {
+ DB_ESS("ESS: Do not process Change Responses\n",0,0) ;
+ return fs;
+ }
+
+ /*
+ * check the para for the Change Request
+ */
+ if (smt_check_para(smc,sm,plist_raf_chg_req)) {
+ DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ;
+ return fs;
+ }
+
+ /*
+ * Verify the path index and resource
+ * type are correct. If any of
+ * these are false, don't process this
+ * change request frame.
+ */
+ if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index
+ != PRIMARY_RING) || (msg_res_type != SYNC_BW)) {
+ DB_ESS("ESS: RAF frame with para problem, ignoring\n",0,0) ;
+ return fs;
+ }
+
+ /*
+ * Extract message queue parameters
+ */
+ p = (void *) sm_to_para(smc,sm,SMT_P320F) ;
+ payload = ((struct smt_p_320f *)p)->mib_payload ;
+ p = (void *) sm_to_para(smc,sm,SMT_P3210) ;
+ overhead = ((struct smt_p_3210 *)p)->mib_overhead ;
+
+ DB_ESSN(2,"ESS: Change Request from %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ DB_ESSN(2,"payload= %lx overhead= %lx\n",payload,overhead) ;
+
+ /*
+ * process the bandwidth allocation
+ */
+ if(!process_bw_alloc(smc,(long)payload,(long)overhead))
+ return fs;
+
+ /*
+ * send an RAF Change Reply
+ */
+ ess_send_response(smc,sm,CHANGE_ALLOCATION) ;
+
+ return fs;
+ /* end of Process Change Request */
+
+ /*
+ * Process Report Response
+ */
+ case REPORT_ALLOCATION :
+ /*
+ * except only requests
+ */
+ if (sm->smt_type != SMT_REQUEST) {
+ DB_ESS("ESS: Do not process a Report Reply\n",0,0) ;
+ return fs;
+ }
+
+ DB_ESSN(2,"ESS: Report Request from %s\n",
+ addr_to_string(&(sm->smt_source)),0) ;
+
+ /*
+ * verify that the resource type is sync bw only
+ */
+ if (msg_res_type != SYNC_BW) {
+ DB_ESS("ESS: ignoring RAF with para problem\n",0,0) ;
+ return fs;
+ }
+
+ /*
+ * send an RAF Change Reply
+ */
+ ess_send_response(smc,sm,REPORT_ALLOCATION) ;
+
+ return fs;
+ /* end of Process Report Request */
+
+ default:
+ /*
+ * error in frame
+ */
+ DB_ESS("ESS: ignoring RAF with bad sba_cmd\n",0,0) ;
+ break ;
+ }
+
+ return fs;
+}
+
+/*
+ * determines the synchronous bandwidth, set the TSYNC register and the
+ * mib variables SBAPayload, SBAOverhead and fddiMACT-NEG.
+ */
+static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead)
+{
+ /*
+ * determine the synchronous bandwidth (sync_bw) in bytes per T-NEG,
+ * if the payload is greater than zero.
+ * For the SBAPayload and the SBAOverhead we have the following
+ * unite quations
+ * _ _
+ * | bytes |
+ * SBAPayload = | 8000 ------ |
+ * | s |
+ * - -
+ * _ _
+ * | bytes |
+ * SBAOverhead = | ------ |
+ * | T-NEG |
+ * - -
+ *
+ * T-NEG is described by the equation:
+ *
+ * (-) fddiMACT-NEG
+ * T-NEG = -------------------
+ * 12500000 1/s
+ *
+ * The number of bytes we are able to send is the payload
+ * plus the overhead.
+ *
+ * bytes T-NEG SBAPayload 8000 bytes/s
+ * sync_bw = SBAOverhead ------ + -----------------------------
+ * T-NEG T-NEG
+ *
+ *
+ * 1
+ * sync_bw = SBAOverhead + ---- (-)fddiMACT-NEG * SBAPayload
+ * 1562
+ *
+ */
+
+ /*
+ * set the mib attributes fddiPATHSbaOverhead, fddiPATHSbaPayload
+ */
+/* if (smt_set_obj(smc,SMT_P320F,payload,S_SET)) {
+ DB_ESS("ESS: SMT does not accept the payload value\n",0,0) ;
+ return FALSE;
+ }
+ if (smt_set_obj(smc,SMT_P3210,overhead,S_SET)) {
+ DB_ESS("ESS: SMT does not accept the overhead value\n",0,0) ;
+ return FALSE;
+ } */
+
+ /* premliminary */
+ if (payload > MAX_PAYLOAD || overhead > 5000) {
+ DB_ESS("ESS: payload / overhead not accepted\n",0,0) ;
+ return FALSE;
+ }
+
+ /*
+ * start the iterative allocation process if the payload or the overhead
+ * are smaller than the parsed values
+ */
+ if (smc->mib.fddiESSPayload &&
+ ((u_long)payload != smc->mib.fddiESSPayload ||
+ (u_long)overhead != smc->mib.fddiESSOverhead)) {
+ smc->ess.raf_act_timer_poll = TRUE ;
+ smc->ess.timer_count = 0 ;
+ }
+
+ /*
+ * evulate the Payload
+ */
+ if (payload) {
+ DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit on\n",0,0) ;
+ smc->ess.sync_bw_available = TRUE ;
+
+ smc->ess.sync_bw = overhead -
+ (long)smc->mib.m[MAC0].fddiMACT_Neg *
+ payload / 1562 ;
+ }
+ else {
+ DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit off\n",0,0) ;
+ smc->ess.sync_bw_available = FALSE ;
+ smc->ess.sync_bw = 0 ;
+ overhead = 0 ;
+ }
+
+ smc->mib.a[PATH0].fddiPATHSbaPayload = payload ;
+ smc->mib.a[PATH0].fddiPATHSbaOverhead = overhead ;
+
+
+ DB_ESSN(2,"tsync = %lx\n",smc->ess.sync_bw,0) ;
+
+ ess_config_fifo(smc) ;
+ set_formac_tsync(smc,smc->ess.sync_bw) ;
+ return TRUE;
+}
+
+static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
+ int sba_cmd)
+{
+ struct smt_sba_chg *chg ;
+ SMbuf *mb ;
+ void *p ;
+
+ /*
+ * get and initialize the response frame
+ */
+ if (sba_cmd == CHANGE_ALLOCATION) {
+ if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY,
+ sizeof(struct smt_sba_chg))))
+ return ;
+ }
+ else {
+ if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY,
+ sizeof(struct smt_sba_rep_res))))
+ return ;
+ }
+
+ chg = smtod(mb,struct smt_sba_chg *) ;
+ chg->smt.smt_tid = sm->smt_tid ;
+ chg->smt.smt_dest = sm->smt_source ;
+
+ /* set P15 */
+ chg->s_type.para.p_type = SMT_P0015 ;
+ chg->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ;
+ chg->s_type.res_type = SYNC_BW ;
+
+ /* set P16 */
+ chg->cmd.para.p_type = SMT_P0016 ;
+ chg->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ;
+ chg->cmd.sba_cmd = sba_cmd ;
+
+ /* set P320B */
+ chg->path.para.p_type = SMT_P320B ;
+ chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
+ chg->path.mib_index = SBAPATHINDEX ;
+ chg->path.path_pad = 0;
+ chg->path.path_index = PRIMARY_RING ;
+
+ /* set P320F */
+ chg->payload.para.p_type = SMT_P320F ;
+ chg->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ;
+ chg->payload.mib_index = SBAPATHINDEX ;
+ chg->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ;
+
+ /* set P3210 */
+ chg->overhead.para.p_type = SMT_P3210 ;
+ chg->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ;
+ chg->overhead.mib_index = SBAPATHINDEX ;
+ chg->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+
+ if (sba_cmd == CHANGE_ALLOCATION) {
+ /* set P1A */
+ chg->cat.para.p_type = SMT_P001A ;
+ chg->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ;
+ p = (void *) sm_to_para(smc,sm,SMT_P001A) ;
+ chg->cat.category = ((struct smt_p_001a *)p)->category ;
+ }
+ dump_smt(smc,(struct smt_header *)chg,"RAF") ;
+ ess_send_frame(smc,mb) ;
+}
+
+void ess_timer_poll(struct s_smc *smc)
+{
+ if (!smc->ess.raf_act_timer_poll)
+ return ;
+
+ DB_ESSN(2,"ESS: timer_poll\n",0,0) ;
+
+ smc->ess.timer_count++ ;
+ if (smc->ess.timer_count == 10) {
+ smc->ess.timer_count = 0 ;
+ ess_send_alc_req(smc) ;
+ }
+}
+
+static void ess_send_alc_req(struct s_smc *smc)
+{
+ struct smt_sba_alc_req *req ;
+ SMbuf *mb ;
+
+ /*
+ * send never allocation request where the requested payload and
+ * overhead is zero or deallocate bandwidth when no bandwidth is
+ * parsed
+ */
+ if (!smc->mib.fddiESSPayload) {
+ smc->mib.fddiESSOverhead = 0 ;
+ }
+ else {
+ if (!smc->mib.fddiESSOverhead)
+ smc->mib.fddiESSOverhead = DEFAULT_OV ;
+ }
+
+ if (smc->mib.fddiESSOverhead ==
+ smc->mib.a[PATH0].fddiPATHSbaOverhead &&
+ smc->mib.fddiESSPayload ==
+ smc->mib.a[PATH0].fddiPATHSbaPayload){
+ smc->ess.raf_act_timer_poll = FALSE ;
+ smc->ess.timer_count = 7 ; /* next RAF alc req after 3 s */
+ return ;
+ }
+
+ /*
+ * get and initialize the response frame
+ */
+ if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST,
+ sizeof(struct smt_sba_alc_req))))
+ return ;
+ req = smtod(mb,struct smt_sba_alc_req *) ;
+ req->smt.smt_tid = smc->ess.alloc_trans_id = smt_get_tid(smc) ;
+ req->smt.smt_dest = smt_sba_da ;
+
+ /* set P15 */
+ req->s_type.para.p_type = SMT_P0015 ;
+ req->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ;
+ req->s_type.res_type = SYNC_BW ;
+
+ /* set P16 */
+ req->cmd.para.p_type = SMT_P0016 ;
+ req->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ;
+ req->cmd.sba_cmd = REQUEST_ALLOCATION ;
+
+ /*
+ * set the parameter type and parameter length of all used
+ * parameters
+ */
+
+ /* set P320B */
+ req->path.para.p_type = SMT_P320B ;
+ req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
+ req->path.mib_index = SBAPATHINDEX ;
+ req->path.path_pad = 0;
+ req->path.path_index = PRIMARY_RING ;
+
+ /* set P0017 */
+ req->pl_req.para.p_type = SMT_P0017 ;
+ req->pl_req.para.p_len = sizeof(struct smt_p_0017) - PARA_LEN ;
+ req->pl_req.sba_pl_req = smc->mib.fddiESSPayload -
+ smc->mib.a[PATH0].fddiPATHSbaPayload ;
+
+ /* set P0018 */
+ req->ov_req.para.p_type = SMT_P0018 ;
+ req->ov_req.para.p_len = sizeof(struct smt_p_0018) - PARA_LEN ;
+ req->ov_req.sba_ov_req = smc->mib.fddiESSOverhead -
+ smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+
+ /* set P320F */
+ req->payload.para.p_type = SMT_P320F ;
+ req->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ;
+ req->payload.mib_index = SBAPATHINDEX ;
+ req->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ;
+
+ /* set P3210 */
+ req->overhead.para.p_type = SMT_P3210 ;
+ req->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ;
+ req->overhead.mib_index = SBAPATHINDEX ;
+ req->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+
+ /* set P19 */
+ req->a_addr.para.p_type = SMT_P0019 ;
+ req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ;
+ req->a_addr.sba_pad = 0;
+ req->a_addr.alloc_addr = null_addr ;
+
+ /* set P1A */
+ req->cat.para.p_type = SMT_P001A ;
+ req->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ;
+ req->cat.category = smc->mib.fddiESSCategory ;
+
+ /* set P1B */
+ req->tneg.para.p_type = SMT_P001B ;
+ req->tneg.para.p_len = sizeof(struct smt_p_001b) - PARA_LEN ;
+ req->tneg.max_t_neg = smc->mib.fddiESSMaxTNeg ;
+
+ /* set P1C */
+ req->segm.para.p_type = SMT_P001C ;
+ req->segm.para.p_len = sizeof(struct smt_p_001c) - PARA_LEN ;
+ req->segm.min_seg_siz = smc->mib.fddiESSMinSegmentSize ;
+
+ dump_smt(smc,(struct smt_header *)req,"RAF") ;
+ ess_send_frame(smc,mb) ;
+}
+
+static void ess_send_frame(struct s_smc *smc, SMbuf *mb)
+{
+ /*
+ * check if the frame must be send to the own ESS
+ */
+ if (smc->ess.local_sba_active) {
+ /*
+ * Send the Change Reply to the local SBA
+ */
+ DB_ESS("ESS:Send to the local SBA\n",0,0) ;
+ if (!smc->ess.sba_reply_pend)
+ smc->ess.sba_reply_pend = mb ;
+ else {
+ DB_ESS("Frame is lost - another frame was pending\n",0,0);
+ smt_free_mbuf(smc,mb) ;
+ }
+ }
+ else {
+ /*
+ * Send the SBA RAF Change Reply to the network
+ */
+ DB_ESS("ESS:Send to the network\n",0,0) ;
+ smt_send_frame(smc,mb,FC_SMT_INFO,0) ;
+ }
+}
+
+void ess_para_change(struct s_smc *smc)
+{
+ (void)process_bw_alloc(smc,(long)smc->mib.a[PATH0].fddiPATHSbaPayload,
+ (long)smc->mib.a[PATH0].fddiPATHSbaOverhead) ;
+}
+
+static void ess_config_fifo(struct s_smc *smc)
+{
+ /*
+ * if nothing to do exit
+ */
+ if (smc->mib.a[PATH0].fddiPATHSbaPayload) {
+ if (smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON &&
+ (smc->hw.fp.fifo.fifo_config_mode&SEND_ASYNC_AS_SYNC) ==
+ smc->mib.fddiESSSynchTxMode) {
+ return ;
+ }
+ }
+ else {
+ if (!(smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON)) {
+ return ;
+ }
+ }
+
+ /*
+ * split up the FIFO and reinitialize the queues
+ */
+ formac_reinit_tx(smc) ;
+}
+
+#endif /* ESS */
+
+#endif /* no SLIM_SMT */
+
diff --git a/drivers/net/fddi/skfp/fplustm.c b/drivers/net/fddi/skfp/fplustm.c
new file mode 100644
index 000000000..7d3779ae7
--- /dev/null
+++ b/drivers/net/fddi/skfp/fplustm.c
@@ -0,0 +1,1492 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * FORMAC+ Driver for tag mode
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#include <linux/bitrev.h>
+#include <linux/etherdevice.h>
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)fplustm.c 1.32 99/02/23 (C) SK " ;
+#endif
+
+#ifndef UNUSED
+#ifdef lint
+#define UNUSED(x) (x) = (x)
+#else
+#define UNUSED(x)
+#endif
+#endif
+
+#define FM_ADDRX (FM_ADDET|FM_EXGPA0|FM_EXGPA1)
+#define MS2BCLK(x) ((x)*12500L)
+#define US2BCLK(x) ((x)*1250L)
+
+/*
+ * prototypes for static function
+ */
+static void build_claim_beacon(struct s_smc *smc, u_long t_request);
+static int init_mac(struct s_smc *smc, int all);
+static void rtm_init(struct s_smc *smc);
+static void smt_split_up_fifo(struct s_smc *smc);
+
+#if (!defined(NO_SMT_PANIC) || defined(DEBUG))
+static char write_mdr_warning [] = "E350 write_mdr() FM_SNPPND is set\n";
+static char cam_warning [] = "E_SMT_004: CAM still busy\n";
+#endif
+
+#define DUMMY_READ() smc->hw.mc_dummy = (u_short) inp(ADDR(B0_RAP))
+
+#define CHECK_NPP() { unsigned int k = 10000 ;\
+ while ((inpw(FM_A(FM_STMCHN)) & FM_SNPPND) && k) k--;\
+ if (!k) { \
+ SMT_PANIC(smc,SMT_E0130, SMT_E0130_MSG) ; \
+ } \
+ }
+
+#define CHECK_CAM() { unsigned int k = 10 ;\
+ while (!(inpw(FM_A(FM_AFSTAT)) & FM_DONE) && k) k--;\
+ if (!k) { \
+ SMT_PANIC(smc,SMT_E0131, SMT_E0131_MSG) ; \
+ } \
+ }
+
+const struct fddi_addr fddi_broadcast = {{0xff,0xff,0xff,0xff,0xff,0xff}};
+static const struct fddi_addr null_addr = {{0,0,0,0,0,0}};
+static const struct fddi_addr dbeacon_multi = {{0x01,0x80,0xc2,0x00,0x01,0x00}};
+
+static const u_short my_said = 0xffff ; /* short address (n.u.) */
+static const u_short my_sagp = 0xffff ; /* short group address (n.u.) */
+
+/*
+ * define my address
+ */
+#ifdef USE_CAN_ADDR
+#define MA smc->hw.fddi_canon_addr
+#else
+#define MA smc->hw.fddi_home_addr
+#endif
+
+
+/*
+ * useful interrupt bits
+ */
+static const int mac_imsk1u = FM_STXABRS | FM_STXABRA0 | FM_SXMTABT ;
+static const int mac_imsk1l = FM_SQLCKS | FM_SQLCKA0 | FM_SPCEPDS | FM_SPCEPDA0|
+ FM_STBURS | FM_STBURA0 ;
+
+ /* delete FM_SRBFL after tests */
+static const int mac_imsk2u = FM_SERRSF | FM_SNFSLD | FM_SRCVOVR | FM_SRBFL |
+ FM_SMYCLM ;
+static const int mac_imsk2l = FM_STRTEXR | FM_SDUPCLM | FM_SFRMCTR |
+ FM_SERRCTR | FM_SLSTCTR |
+ FM_STRTEXP | FM_SMULTDA | FM_SRNGOP ;
+
+static const int mac_imsk3u = FM_SRCVOVR2 | FM_SRBFL2 ;
+static const int mac_imsk3l = FM_SRPERRQ2 | FM_SRPERRQ1 ;
+
+static const int mac_beacon_imsk2u = FM_SOTRBEC | FM_SMYBEC | FM_SBEC |
+ FM_SLOCLM | FM_SHICLM | FM_SMYCLM | FM_SCLM ;
+
+
+static u_long mac_get_tneg(struct s_smc *smc)
+{
+ u_long tneg ;
+
+ tneg = (u_long)((long)inpw(FM_A(FM_TNEG))<<5) ;
+ return (u_long)((tneg + ((inpw(FM_A(FM_TMRS))>>10)&0x1f)) |
+ 0xffe00000L) ;
+}
+
+void mac_update_counter(struct s_smc *smc)
+{
+ smc->mib.m[MAC0].fddiMACFrame_Ct =
+ (smc->mib.m[MAC0].fddiMACFrame_Ct & 0xffff0000L)
+ + (u_short) inpw(FM_A(FM_FCNTR)) ;
+ smc->mib.m[MAC0].fddiMACLost_Ct =
+ (smc->mib.m[MAC0].fddiMACLost_Ct & 0xffff0000L)
+ + (u_short) inpw(FM_A(FM_LCNTR)) ;
+ smc->mib.m[MAC0].fddiMACError_Ct =
+ (smc->mib.m[MAC0].fddiMACError_Ct & 0xffff0000L)
+ + (u_short) inpw(FM_A(FM_ECNTR)) ;
+ smc->mib.m[MAC0].fddiMACT_Neg = mac_get_tneg(smc) ;
+#ifdef SMT_REAL_TOKEN_CT
+ /*
+ * If the token counter is emulated it is updated in smt_event.
+ */
+ TBD
+#else
+ smt_emulate_token_ct( smc, MAC0 );
+#endif
+}
+
+/*
+ * write long value into buffer memory over memory data register (MDR),
+ */
+static void write_mdr(struct s_smc *smc, u_long val)
+{
+ CHECK_NPP() ;
+ MDRW(val) ;
+}
+
+#if 0
+/*
+ * read long value from buffer memory over memory data register (MDR),
+ */
+static u_long read_mdr(struct s_smc *smc, unsigned int addr)
+{
+ long p ;
+ CHECK_NPP() ;
+ MARR(addr) ;
+ outpw(FM_A(FM_CMDREG1),FM_IRMEMWO) ;
+ CHECK_NPP() ; /* needed for PCI to prevent from timeing violations */
+/* p = MDRR() ; */ /* bad read values if the workaround */
+ /* smc->hw.mc_dummy = *((short volatile far *)(addr)))*/
+ /* is used */
+ p = (u_long)inpw(FM_A(FM_MDRU))<<16 ;
+ p += (u_long)inpw(FM_A(FM_MDRL)) ;
+ return p;
+}
+#endif
+
+/*
+ * clear buffer memory
+ */
+static void init_ram(struct s_smc *smc)
+{
+ u_short i ;
+
+ smc->hw.fp.fifo.rbc_ram_start = 0 ;
+ smc->hw.fp.fifo.rbc_ram_end =
+ smc->hw.fp.fifo.rbc_ram_start + RBC_MEM_SIZE ;
+ CHECK_NPP() ;
+ MARW(smc->hw.fp.fifo.rbc_ram_start) ;
+ for (i = smc->hw.fp.fifo.rbc_ram_start;
+ i < (u_short) (smc->hw.fp.fifo.rbc_ram_end-1); i++)
+ write_mdr(smc,0L) ;
+ /* Erase the last byte too */
+ write_mdr(smc,0L) ;
+}
+
+/*
+ * set receive FIFO pointer
+ */
+static void set_recvptr(struct s_smc *smc)
+{
+ /*
+ * initialize the pointer for receive queue 1
+ */
+ outpw(FM_A(FM_RPR1),smc->hw.fp.fifo.rx1_fifo_start) ; /* RPR1 */
+ outpw(FM_A(FM_SWPR1),smc->hw.fp.fifo.rx1_fifo_start) ; /* SWPR1 */
+ outpw(FM_A(FM_WPR1),smc->hw.fp.fifo.rx1_fifo_start) ; /* WPR1 */
+ outpw(FM_A(FM_EARV1),smc->hw.fp.fifo.tx_s_start-1) ; /* EARV1 */
+
+ /*
+ * initialize the pointer for receive queue 2
+ */
+ if (smc->hw.fp.fifo.rx2_fifo_size) {
+ outpw(FM_A(FM_RPR2),smc->hw.fp.fifo.rx2_fifo_start) ;
+ outpw(FM_A(FM_SWPR2),smc->hw.fp.fifo.rx2_fifo_start) ;
+ outpw(FM_A(FM_WPR2),smc->hw.fp.fifo.rx2_fifo_start) ;
+ outpw(FM_A(FM_EARV2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+ }
+ else {
+ outpw(FM_A(FM_RPR2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+ outpw(FM_A(FM_SWPR2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+ outpw(FM_A(FM_WPR2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+ outpw(FM_A(FM_EARV2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+ }
+}
+
+/*
+ * set transmit FIFO pointer
+ */
+static void set_txptr(struct s_smc *smc)
+{
+ outpw(FM_A(FM_CMDREG2),FM_IRSTQ) ; /* reset transmit queues */
+
+ /*
+ * initialize the pointer for asynchronous transmit queue
+ */
+ outpw(FM_A(FM_RPXA0),smc->hw.fp.fifo.tx_a0_start) ; /* RPXA0 */
+ outpw(FM_A(FM_SWPXA0),smc->hw.fp.fifo.tx_a0_start) ; /* SWPXA0 */
+ outpw(FM_A(FM_WPXA0),smc->hw.fp.fifo.tx_a0_start) ; /* WPXA0 */
+ outpw(FM_A(FM_EAA0),smc->hw.fp.fifo.rx2_fifo_start-1) ; /* EAA0 */
+
+ /*
+ * initialize the pointer for synchronous transmit queue
+ */
+ if (smc->hw.fp.fifo.tx_s_size) {
+ outpw(FM_A(FM_RPXS),smc->hw.fp.fifo.tx_s_start) ;
+ outpw(FM_A(FM_SWPXS),smc->hw.fp.fifo.tx_s_start) ;
+ outpw(FM_A(FM_WPXS),smc->hw.fp.fifo.tx_s_start) ;
+ outpw(FM_A(FM_EAS),smc->hw.fp.fifo.tx_a0_start-1) ;
+ }
+ else {
+ outpw(FM_A(FM_RPXS),smc->hw.fp.fifo.tx_a0_start-1) ;
+ outpw(FM_A(FM_SWPXS),smc->hw.fp.fifo.tx_a0_start-1) ;
+ outpw(FM_A(FM_WPXS),smc->hw.fp.fifo.tx_a0_start-1) ;
+ outpw(FM_A(FM_EAS),smc->hw.fp.fifo.tx_a0_start-1) ;
+ }
+}
+
+/*
+ * init memory buffer management registers
+ */
+static void init_rbc(struct s_smc *smc)
+{
+ u_short rbc_ram_addr ;
+
+ /*
+ * set unused pointers or permanent pointers
+ */
+ rbc_ram_addr = smc->hw.fp.fifo.rx2_fifo_start - 1 ;
+
+ outpw(FM_A(FM_RPXA1),rbc_ram_addr) ; /* a1-send pointer */
+ outpw(FM_A(FM_WPXA1),rbc_ram_addr) ;
+ outpw(FM_A(FM_SWPXA1),rbc_ram_addr) ;
+ outpw(FM_A(FM_EAA1),rbc_ram_addr) ;
+
+ set_recvptr(smc) ;
+ set_txptr(smc) ;
+}
+
+/*
+ * init rx pointer
+ */
+static void init_rx(struct s_smc *smc)
+{
+ struct s_smt_rx_queue *queue ;
+
+ /*
+ * init all tx data structures for receive queue 1
+ */
+ smc->hw.fp.rx[QUEUE_R1] = queue = &smc->hw.fp.rx_q[QUEUE_R1] ;
+ queue->rx_bmu_ctl = (HW_PTR) ADDR(B0_R1_CSR) ;
+ queue->rx_bmu_dsc = (HW_PTR) ADDR(B4_R1_DA) ;
+
+ /*
+ * init all tx data structures for receive queue 2
+ */
+ smc->hw.fp.rx[QUEUE_R2] = queue = &smc->hw.fp.rx_q[QUEUE_R2] ;
+ queue->rx_bmu_ctl = (HW_PTR) ADDR(B0_R2_CSR) ;
+ queue->rx_bmu_dsc = (HW_PTR) ADDR(B4_R2_DA) ;
+}
+
+/*
+ * set the TSYNC register of the FORMAC to regulate synchronous transmission
+ */
+void set_formac_tsync(struct s_smc *smc, long sync_bw)
+{
+ outpw(FM_A(FM_TSYNC),(unsigned int) (((-sync_bw) >> 5) & 0xffff) ) ;
+}
+
+/*
+ * init all tx data structures
+ */
+static void init_tx(struct s_smc *smc)
+{
+ struct s_smt_tx_queue *queue ;
+
+ /*
+ * init all tx data structures for the synchronous queue
+ */
+ smc->hw.fp.tx[QUEUE_S] = queue = &smc->hw.fp.tx_q[QUEUE_S] ;
+ queue->tx_bmu_ctl = (HW_PTR) ADDR(B0_XS_CSR) ;
+ queue->tx_bmu_dsc = (HW_PTR) ADDR(B5_XS_DA) ;
+
+#ifdef ESS
+ set_formac_tsync(smc,smc->ess.sync_bw) ;
+#endif
+
+ /*
+ * init all tx data structures for the asynchronous queue 0
+ */
+ smc->hw.fp.tx[QUEUE_A0] = queue = &smc->hw.fp.tx_q[QUEUE_A0] ;
+ queue->tx_bmu_ctl = (HW_PTR) ADDR(B0_XA_CSR) ;
+ queue->tx_bmu_dsc = (HW_PTR) ADDR(B5_XA_DA) ;
+
+
+ llc_recover_tx(smc) ;
+}
+
+static void mac_counter_init(struct s_smc *smc)
+{
+ int i ;
+ u_long *ec ;
+
+ /*
+ * clear FORMAC+ frame-, lost- and error counter
+ */
+ outpw(FM_A(FM_FCNTR),0) ;
+ outpw(FM_A(FM_LCNTR),0) ;
+ outpw(FM_A(FM_ECNTR),0) ;
+ /*
+ * clear internal error counter structure
+ */
+ ec = (u_long *)&smc->hw.fp.err_stats ;
+ for (i = (sizeof(struct err_st)/sizeof(long)) ; i ; i--)
+ *ec++ = 0L ;
+ smc->mib.m[MAC0].fddiMACRingOp_Ct = 0 ;
+}
+
+/*
+ * set FORMAC address, and t_request
+ */
+static void set_formac_addr(struct s_smc *smc)
+{
+ long t_requ = smc->mib.m[MAC0].fddiMACT_Req ;
+
+ outpw(FM_A(FM_SAID),my_said) ; /* set short address */
+ outpw(FM_A(FM_LAIL),(unsigned short)((smc->hw.fddi_home_addr.a[4]<<8) +
+ smc->hw.fddi_home_addr.a[5])) ;
+ outpw(FM_A(FM_LAIC),(unsigned short)((smc->hw.fddi_home_addr.a[2]<<8) +
+ smc->hw.fddi_home_addr.a[3])) ;
+ outpw(FM_A(FM_LAIM),(unsigned short)((smc->hw.fddi_home_addr.a[0]<<8) +
+ smc->hw.fddi_home_addr.a[1])) ;
+
+ outpw(FM_A(FM_SAGP),my_sagp) ; /* set short group address */
+
+ outpw(FM_A(FM_LAGL),(unsigned short)((smc->hw.fp.group_addr.a[4]<<8) +
+ smc->hw.fp.group_addr.a[5])) ;
+ outpw(FM_A(FM_LAGC),(unsigned short)((smc->hw.fp.group_addr.a[2]<<8) +
+ smc->hw.fp.group_addr.a[3])) ;
+ outpw(FM_A(FM_LAGM),(unsigned short)((smc->hw.fp.group_addr.a[0]<<8) +
+ smc->hw.fp.group_addr.a[1])) ;
+
+ /* set r_request regs. (MSW & LSW of TRT ) */
+ outpw(FM_A(FM_TREQ1),(unsigned short)(t_requ>>16)) ;
+ outpw(FM_A(FM_TREQ0),(unsigned short)t_requ) ;
+}
+
+static void set_int(char *p, int l)
+{
+ p[0] = (char)(l >> 24) ;
+ p[1] = (char)(l >> 16) ;
+ p[2] = (char)(l >> 8) ;
+ p[3] = (char)(l >> 0) ;
+}
+
+/*
+ * copy TX descriptor to buffer mem
+ * append FC field and MAC frame
+ * if more bit is set in descr
+ * append pointer to descriptor (endless loop)
+ * else
+ * append 'end of chain' pointer
+ */
+static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac,
+ unsigned int off, int len)
+/* u_long td; transmit descriptor */
+/* struct fddi_mac *mac; mac frame pointer */
+/* unsigned int off; start address within buffer memory */
+/* int len ; length of the frame including the FC */
+{
+ int i ;
+ __le32 *p ;
+
+ CHECK_NPP() ;
+ MARW(off) ; /* set memory address reg for writes */
+
+ p = (__le32 *) mac ;
+ for (i = (len + 3)/4 ; i ; i--) {
+ if (i == 1) {
+ /* last word, set the tag bit */
+ outpw(FM_A(FM_CMDREG2),FM_ISTTB) ;
+ }
+ write_mdr(smc,le32_to_cpu(*p)) ;
+ p++ ;
+ }
+
+ outpw(FM_A(FM_CMDREG2),FM_ISTTB) ; /* set the tag bit */
+ write_mdr(smc,td) ; /* write over memory data reg to buffer */
+}
+
+/*
+ BEGIN_MANUAL_ENTRY(module;tests;3)
+ How to test directed beacon frames
+ ----------------------------------------------------------------
+
+ o Insert a break point in the function build_claim_beacon()
+ before calling copy_tx_mac() for building the claim frame.
+ o Modify the RM3_DETECT case so that the RM6_DETECT state
+ will always entered from the RM3_DETECT state (function rmt_fsm(),
+ rmt.c)
+ o Compile the driver.
+ o Set the parameter TREQ in the protocol.ini or net.cfg to a
+ small value to make sure your station will win the claim
+ process.
+ o Start the driver.
+ o When you reach the break point, modify the SA and DA address
+ of the claim frame (e.g. SA = DA = 10005affffff).
+ o When you see RM3_DETECT and RM6_DETECT, observe the direct
+ beacon frames on the UPPSLANA.
+
+ END_MANUAL_ENTRY
+ */
+static void directed_beacon(struct s_smc *smc)
+{
+ SK_LOC_DECL(__le32,a[2]) ;
+
+ /*
+ * set UNA in frame
+ * enable FORMAC to send endless queue of directed beacon
+ * important: the UNA starts at byte 1 (not at byte 0)
+ */
+ * (char *) a = (char) ((long)DBEACON_INFO<<24L) ;
+ a[1] = 0 ;
+ memcpy((char *)a+1, (char *) &smc->mib.m[MAC0].fddiMACUpstreamNbr, ETH_ALEN);
+
+ CHECK_NPP() ;
+ /* set memory address reg for writes */
+ MARW(smc->hw.fp.fifo.rbc_ram_start+DBEACON_FRAME_OFF+4) ;
+ write_mdr(smc,le32_to_cpu(a[0])) ;
+ outpw(FM_A(FM_CMDREG2),FM_ISTTB) ; /* set the tag bit */
+ write_mdr(smc,le32_to_cpu(a[1])) ;
+
+ outpw(FM_A(FM_SABC),smc->hw.fp.fifo.rbc_ram_start + DBEACON_FRAME_OFF) ;
+}
+
+/*
+ setup claim & beacon pointer
+ NOTE :
+ special frame packets end with a pointer to their own
+ descriptor, and the MORE bit is set in the descriptor
+*/
+static void build_claim_beacon(struct s_smc *smc, u_long t_request)
+{
+ u_int td ;
+ int len ;
+ struct fddi_mac_sf *mac ;
+
+ /*
+ * build claim packet
+ */
+ len = 17 ;
+ td = TX_DESCRIPTOR | ((((u_int)len-1)&3)<<27) ;
+ mac = &smc->hw.fp.mac_sfb ;
+ mac->mac_fc = FC_CLAIM ;
+ /* DA == SA in claim frame */
+ mac->mac_source = mac->mac_dest = MA ;
+ /* 2's complement */
+ set_int((char *)mac->mac_info,(int)t_request) ;
+
+ copy_tx_mac(smc,td,(struct fddi_mac *)mac,
+ smc->hw.fp.fifo.rbc_ram_start + CLAIM_FRAME_OFF,len) ;
+ /* set CLAIM start pointer */
+ outpw(FM_A(FM_SACL),smc->hw.fp.fifo.rbc_ram_start + CLAIM_FRAME_OFF) ;
+
+ /*
+ * build beacon packet
+ */
+ len = 17 ;
+ td = TX_DESCRIPTOR | ((((u_int)len-1)&3)<<27) ;
+ mac->mac_fc = FC_BEACON ;
+ mac->mac_source = MA ;
+ mac->mac_dest = null_addr ; /* DA == 0 in beacon frame */
+ set_int((char *) mac->mac_info,((int)BEACON_INFO<<24) + 0 ) ;
+
+ copy_tx_mac(smc,td,(struct fddi_mac *)mac,
+ smc->hw.fp.fifo.rbc_ram_start + BEACON_FRAME_OFF,len) ;
+ /* set beacon start pointer */
+ outpw(FM_A(FM_SABC),smc->hw.fp.fifo.rbc_ram_start + BEACON_FRAME_OFF) ;
+
+ /*
+ * build directed beacon packet
+ * contains optional UNA
+ */
+ len = 23 ;
+ td = TX_DESCRIPTOR | ((((u_int)len-1)&3)<<27) ;
+ mac->mac_fc = FC_BEACON ;
+ mac->mac_source = MA ;
+ mac->mac_dest = dbeacon_multi ; /* multicast */
+ set_int((char *) mac->mac_info,((int)DBEACON_INFO<<24) + 0 ) ;
+ set_int((char *) mac->mac_info+4,0) ;
+ set_int((char *) mac->mac_info+8,0) ;
+
+ copy_tx_mac(smc,td,(struct fddi_mac *)mac,
+ smc->hw.fp.fifo.rbc_ram_start + DBEACON_FRAME_OFF,len) ;
+
+ /* end of claim/beacon queue */
+ outpw(FM_A(FM_EACB),smc->hw.fp.fifo.rx1_fifo_start-1) ;
+
+ outpw(FM_A(FM_WPXSF),0) ;
+ outpw(FM_A(FM_RPXSF),0) ;
+}
+
+static void formac_rcv_restart(struct s_smc *smc)
+{
+ /* enable receive function */
+ SETMASK(FM_A(FM_MDREG1),smc->hw.fp.rx_mode,FM_ADDRX) ;
+
+ outpw(FM_A(FM_CMDREG1),FM_ICLLR) ; /* clear receive lock */
+}
+
+void formac_tx_restart(struct s_smc *smc)
+{
+ outpw(FM_A(FM_CMDREG1),FM_ICLLS) ; /* clear s-frame lock */
+ outpw(FM_A(FM_CMDREG1),FM_ICLLA0) ; /* clear a-frame lock */
+}
+
+static void enable_formac(struct s_smc *smc)
+{
+ /* set formac IMSK : 0 enables irq */
+ outpw(FM_A(FM_IMSK1U),(unsigned short)~mac_imsk1u);
+ outpw(FM_A(FM_IMSK1L),(unsigned short)~mac_imsk1l);
+ outpw(FM_A(FM_IMSK2U),(unsigned short)~mac_imsk2u);
+ outpw(FM_A(FM_IMSK2L),(unsigned short)~mac_imsk2l);
+ outpw(FM_A(FM_IMSK3U),(unsigned short)~mac_imsk3u);
+ outpw(FM_A(FM_IMSK3L),(unsigned short)~mac_imsk3l);
+}
+
+#if 0 /* Removed because the driver should use the ASICs TX complete IRQ. */
+ /* The FORMACs tx complete IRQ should be used any longer */
+
+/*
+ BEGIN_MANUAL_ENTRY(if,func;others;4)
+
+ void enable_tx_irq(smc, queue)
+ struct s_smc *smc ;
+ u_short queue ;
+
+Function DOWNCALL (SMT, fplustm.c)
+ enable_tx_irq() enables the FORMACs transmit complete
+ interrupt of the queue.
+
+Para queue = QUEUE_S: synchronous queue
+ = QUEUE_A0: asynchronous queue
+
+Note After any ring operational change the transmit complete
+ interrupts are disabled.
+ The operating system dependent module must enable
+ the transmit complete interrupt of a queue,
+ - when it queues the first frame,
+ because of no transmit resources are beeing
+ available and
+ - when it escapes from the function llc_restart_tx
+ while some frames are still queued.
+
+ END_MANUAL_ENTRY
+ */
+void enable_tx_irq(struct s_smc *smc, u_short queue)
+/* u_short queue; 0 = synchronous queue, 1 = asynchronous queue 0 */
+{
+ u_short imask ;
+
+ imask = ~(inpw(FM_A(FM_IMSK1U))) ;
+
+ if (queue == 0) {
+ outpw(FM_A(FM_IMSK1U),~(imask|FM_STEFRMS)) ;
+ }
+ if (queue == 1) {
+ outpw(FM_A(FM_IMSK1U),~(imask|FM_STEFRMA0)) ;
+ }
+}
+
+/*
+ BEGIN_MANUAL_ENTRY(if,func;others;4)
+
+ void disable_tx_irq(smc, queue)
+ struct s_smc *smc ;
+ u_short queue ;
+
+Function DOWNCALL (SMT, fplustm.c)
+ disable_tx_irq disables the FORMACs transmit complete
+ interrupt of the queue
+
+Para queue = QUEUE_S: synchronous queue
+ = QUEUE_A0: asynchronous queue
+
+Note The operating system dependent module should disable
+ the transmit complete interrupts if it escapes from the
+ function llc_restart_tx and no frames are queued.
+
+ END_MANUAL_ENTRY
+ */
+void disable_tx_irq(struct s_smc *smc, u_short queue)
+/* u_short queue; 0 = synchronous queue, 1 = asynchronous queue 0 */
+{
+ u_short imask ;
+
+ imask = ~(inpw(FM_A(FM_IMSK1U))) ;
+
+ if (queue == 0) {
+ outpw(FM_A(FM_IMSK1U),~(imask&~FM_STEFRMS)) ;
+ }
+ if (queue == 1) {
+ outpw(FM_A(FM_IMSK1U),~(imask&~FM_STEFRMA0)) ;
+ }
+}
+#endif
+
+static void disable_formac(struct s_smc *smc)
+{
+ /* clear formac IMSK : 1 disables irq */
+ outpw(FM_A(FM_IMSK1U),MW) ;
+ outpw(FM_A(FM_IMSK1L),MW) ;
+ outpw(FM_A(FM_IMSK2U),MW) ;
+ outpw(FM_A(FM_IMSK2L),MW) ;
+ outpw(FM_A(FM_IMSK3U),MW) ;
+ outpw(FM_A(FM_IMSK3L),MW) ;
+}
+
+
+static void mac_ring_up(struct s_smc *smc, int up)
+{
+ if (up) {
+ formac_rcv_restart(smc) ; /* enable receive function */
+ smc->hw.mac_ring_is_up = TRUE ;
+ llc_restart_tx(smc) ; /* TX queue */
+ }
+ else {
+ /* disable receive function */
+ SETMASK(FM_A(FM_MDREG1),FM_MDISRCV,FM_ADDET) ;
+
+ /* abort current transmit activity */
+ outpw(FM_A(FM_CMDREG2),FM_IACTR) ;
+
+ smc->hw.mac_ring_is_up = FALSE ;
+ }
+}
+
+/*--------------------------- ISR handling ----------------------------------*/
+/*
+ * mac1_irq is in drvfbi.c
+ */
+
+/*
+ * mac2_irq: status bits for the receive queue 1, and ring status
+ * ring status indication bits
+ */
+void mac2_irq(struct s_smc *smc, u_short code_s2u, u_short code_s2l)
+{
+ u_short change_s2l ;
+ u_short change_s2u ;
+
+ /* (jd) 22-Feb-1999
+ * Restart 2_DMax Timer after end of claiming or beaconing
+ */
+ if (code_s2u & (FM_SCLM|FM_SHICLM|FM_SBEC|FM_SOTRBEC)) {
+ queue_event(smc,EVENT_RMT,RM_TX_STATE_CHANGE) ;
+ }
+ else if (code_s2l & (FM_STKISS)) {
+ queue_event(smc,EVENT_RMT,RM_TX_STATE_CHANGE) ;
+ }
+
+ /*
+ * XOR current st bits with the last to avoid useless RMT event queuing
+ */
+ change_s2l = smc->hw.fp.s2l ^ code_s2l ;
+ change_s2u = smc->hw.fp.s2u ^ code_s2u ;
+
+ if ((change_s2l & FM_SRNGOP) ||
+ (!smc->hw.mac_ring_is_up && ((code_s2l & FM_SRNGOP)))) {
+ if (code_s2l & FM_SRNGOP) {
+ mac_ring_up(smc,1) ;
+ queue_event(smc,EVENT_RMT,RM_RING_OP) ;
+ smc->mib.m[MAC0].fddiMACRingOp_Ct++ ;
+ }
+ else {
+ mac_ring_up(smc,0) ;
+ queue_event(smc,EVENT_RMT,RM_RING_NON_OP) ;
+ }
+ goto mac2_end ;
+ }
+ if (code_s2l & FM_SMISFRM) { /* missed frame */
+ smc->mib.m[MAC0].fddiMACNotCopied_Ct++ ;
+ }
+ if (code_s2u & (FM_SRCVOVR | /* recv. FIFO overflow */
+ FM_SRBFL)) { /* recv. buffer full */
+ smc->hw.mac_ct.mac_r_restart_counter++ ;
+/* formac_rcv_restart(smc) ; */
+ smt_stat_counter(smc,1) ;
+/* goto mac2_end ; */
+ }
+ if (code_s2u & FM_SOTRBEC)
+ queue_event(smc,EVENT_RMT,RM_OTHER_BEACON) ;
+ if (code_s2u & FM_SMYBEC)
+ queue_event(smc,EVENT_RMT,RM_MY_BEACON) ;
+ if (change_s2u & code_s2u & FM_SLOCLM) {
+ DB_RMTN(2,"RMT : lower claim received\n",0,0) ;
+ }
+ if ((code_s2u & FM_SMYCLM) && !(code_s2l & FM_SDUPCLM)) {
+ /*
+ * This is my claim and that claim is not detected as a
+ * duplicate one.
+ */
+ queue_event(smc,EVENT_RMT,RM_MY_CLAIM) ;
+ }
+ if (code_s2l & FM_SDUPCLM) {
+ /*
+ * If a duplicate claim frame (same SA but T_Bid != T_Req)
+ * this flag will be set.
+ * In the RMT state machine we need a RM_VALID_CLAIM event
+ * to do the appropriate state change.
+ * RM(34c)
+ */
+ queue_event(smc,EVENT_RMT,RM_VALID_CLAIM) ;
+ }
+ if (change_s2u & code_s2u & FM_SHICLM) {
+ DB_RMTN(2,"RMT : higher claim received\n",0,0) ;
+ }
+ if ( (code_s2l & FM_STRTEXP) ||
+ (code_s2l & FM_STRTEXR) )
+ queue_event(smc,EVENT_RMT,RM_TRT_EXP) ;
+ if (code_s2l & FM_SMULTDA) {
+ /*
+ * The MAC has found a 2. MAC with the same address.
+ * Signal dup_addr_test = failed to RMT state machine.
+ * RM(25)
+ */
+ smc->r.dup_addr_test = DA_FAILED ;
+ queue_event(smc,EVENT_RMT,RM_DUP_ADDR) ;
+ }
+ if (code_s2u & FM_SBEC)
+ smc->hw.fp.err_stats.err_bec_stat++ ;
+ if (code_s2u & FM_SCLM)
+ smc->hw.fp.err_stats.err_clm_stat++ ;
+ if (code_s2l & FM_STVXEXP)
+ smc->mib.m[MAC0].fddiMACTvxExpired_Ct++ ;
+ if ((code_s2u & (FM_SBEC|FM_SCLM))) {
+ if (!(change_s2l & FM_SRNGOP) && (smc->hw.fp.s2l & FM_SRNGOP)) {
+ mac_ring_up(smc,0) ;
+ queue_event(smc,EVENT_RMT,RM_RING_NON_OP) ;
+
+ mac_ring_up(smc,1) ;
+ queue_event(smc,EVENT_RMT,RM_RING_OP) ;
+ smc->mib.m[MAC0].fddiMACRingOp_Ct++ ;
+ }
+ }
+ if (code_s2l & FM_SPHINV)
+ smc->hw.fp.err_stats.err_phinv++ ;
+ if (code_s2l & FM_SSIFG)
+ smc->hw.fp.err_stats.err_sifg_det++ ;
+ if (code_s2l & FM_STKISS)
+ smc->hw.fp.err_stats.err_tkiss++ ;
+ if (code_s2l & FM_STKERR)
+ smc->hw.fp.err_stats.err_tkerr++ ;
+ if (code_s2l & FM_SFRMCTR)
+ smc->mib.m[MAC0].fddiMACFrame_Ct += 0x10000L ;
+ if (code_s2l & FM_SERRCTR)
+ smc->mib.m[MAC0].fddiMACError_Ct += 0x10000L ;
+ if (code_s2l & FM_SLSTCTR)
+ smc->mib.m[MAC0].fddiMACLost_Ct += 0x10000L ;
+ if (code_s2u & FM_SERRSF) {
+ SMT_PANIC(smc,SMT_E0114, SMT_E0114_MSG) ;
+ }
+mac2_end:
+ /* notice old status */
+ smc->hw.fp.s2l = code_s2l ;
+ smc->hw.fp.s2u = code_s2u ;
+ outpw(FM_A(FM_IMSK2U),~mac_imsk2u) ;
+}
+
+/*
+ * mac3_irq: receive queue 2 bits and address detection bits
+ */
+void mac3_irq(struct s_smc *smc, u_short code_s3u, u_short code_s3l)
+{
+ UNUSED(code_s3l) ;
+
+ if (code_s3u & (FM_SRCVOVR2 | /* recv. FIFO overflow */
+ FM_SRBFL2)) { /* recv. buffer full */
+ smc->hw.mac_ct.mac_r_restart_counter++ ;
+ smt_stat_counter(smc,1);
+ }
+
+
+ if (code_s3u & FM_SRPERRQ2) { /* parity error receive queue 2 */
+ SMT_PANIC(smc,SMT_E0115, SMT_E0115_MSG) ;
+ }
+ if (code_s3u & FM_SRPERRQ1) { /* parity error receive queue 2 */
+ SMT_PANIC(smc,SMT_E0116, SMT_E0116_MSG) ;
+ }
+}
+
+
+/*
+ * take formac offline
+ */
+static void formac_offline(struct s_smc *smc)
+{
+ outpw(FM_A(FM_CMDREG2),FM_IACTR) ;/* abort current transmit activity */
+
+ /* disable receive function */
+ SETMASK(FM_A(FM_MDREG1),FM_MDISRCV,FM_ADDET) ;
+
+ /* FORMAC+ 'Initialize Mode' */
+ SETMASK(FM_A(FM_MDREG1),FM_MINIT,FM_MMODE) ;
+
+ disable_formac(smc) ;
+ smc->hw.mac_ring_is_up = FALSE ;
+ smc->hw.hw_state = STOPPED ;
+}
+
+/*
+ * bring formac online
+ */
+static void formac_online(struct s_smc *smc)
+{
+ enable_formac(smc) ;
+ SETMASK(FM_A(FM_MDREG1),FM_MONLINE | FM_SELRA | MDR1INIT |
+ smc->hw.fp.rx_mode, FM_MMODE | FM_SELRA | FM_ADDRX) ;
+}
+
+/*
+ * FORMAC+ full init. (tx, rx, timer, counter, claim & beacon)
+ */
+int init_fplus(struct s_smc *smc)
+{
+ smc->hw.fp.nsa_mode = FM_MRNNSAFNMA ;
+ smc->hw.fp.rx_mode = FM_MDAMA ;
+ smc->hw.fp.group_addr = fddi_broadcast ;
+ smc->hw.fp.func_addr = 0 ;
+ smc->hw.fp.frselreg_init = 0 ;
+
+ init_driver_fplus(smc) ;
+ if (smc->s.sas == SMT_DAS)
+ smc->hw.fp.mdr3init |= FM_MENDAS ;
+
+ smc->hw.mac_ct.mac_nobuf_counter = 0 ;
+ smc->hw.mac_ct.mac_r_restart_counter = 0 ;
+
+ smc->hw.fp.fm_st1u = (HW_PTR) ADDR(B0_ST1U) ;
+ smc->hw.fp.fm_st1l = (HW_PTR) ADDR(B0_ST1L) ;
+ smc->hw.fp.fm_st2u = (HW_PTR) ADDR(B0_ST2U) ;
+ smc->hw.fp.fm_st2l = (HW_PTR) ADDR(B0_ST2L) ;
+ smc->hw.fp.fm_st3u = (HW_PTR) ADDR(B0_ST3U) ;
+ smc->hw.fp.fm_st3l = (HW_PTR) ADDR(B0_ST3L) ;
+
+ smc->hw.fp.s2l = smc->hw.fp.s2u = 0 ;
+ smc->hw.mac_ring_is_up = 0 ;
+
+ mac_counter_init(smc) ;
+
+ /* convert BCKL units to symbol time */
+ smc->hw.mac_pa.t_neg = (u_long)0 ;
+ smc->hw.mac_pa.t_pri = (u_long)0 ;
+
+ /* make sure all PCI settings are correct */
+ mac_do_pci_fix(smc) ;
+
+ return init_mac(smc, 1);
+ /* enable_formac(smc) ; */
+}
+
+static int init_mac(struct s_smc *smc, int all)
+{
+ u_short t_max,x ;
+ u_long time=0 ;
+
+ /*
+ * clear memory
+ */
+ outpw(FM_A(FM_MDREG1),FM_MINIT) ; /* FORMAC+ init mode */
+ set_formac_addr(smc) ;
+ outpw(FM_A(FM_MDREG1),FM_MMEMACT) ; /* FORMAC+ memory activ mode */
+ /* Note: Mode register 2 is set here, incase parity is enabled. */
+ outpw(FM_A(FM_MDREG2),smc->hw.fp.mdr2init) ;
+
+ if (all) {
+ init_ram(smc) ;
+ }
+ else {
+ /*
+ * reset the HPI, the Master and the BMUs
+ */
+ outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+ time = hwt_quick_read(smc) ;
+ }
+
+ /*
+ * set all pointers, frames etc
+ */
+ smt_split_up_fifo(smc) ;
+
+ init_tx(smc) ;
+ init_rx(smc) ;
+ init_rbc(smc) ;
+
+ build_claim_beacon(smc,smc->mib.m[MAC0].fddiMACT_Req) ;
+
+ /* set RX threshold */
+ /* see Errata #SN2 Phantom receive overflow */
+ outpw(FM_A(FM_FRMTHR),14<<12) ; /* switch on */
+
+ /* set formac work mode */
+ outpw(FM_A(FM_MDREG1),MDR1INIT | FM_SELRA | smc->hw.fp.rx_mode) ;
+ outpw(FM_A(FM_MDREG2),smc->hw.fp.mdr2init) ;
+ outpw(FM_A(FM_MDREG3),smc->hw.fp.mdr3init) ;
+ outpw(FM_A(FM_FRSELREG),smc->hw.fp.frselreg_init) ;
+
+ /* set timer */
+ /*
+ * errata #22 fplus:
+ * T_MAX must not be FFFE
+ * or one of FFDF, FFB8, FF91 (-0x27 etc..)
+ */
+ t_max = (u_short)(smc->mib.m[MAC0].fddiMACT_Max/32) ;
+ x = t_max/0x27 ;
+ x *= 0x27 ;
+ if ((t_max == 0xfffe) || (t_max - x == 0x16))
+ t_max-- ;
+ outpw(FM_A(FM_TMAX),(u_short)t_max) ;
+
+ /* BugFix for report #10204 */
+ if (smc->mib.m[MAC0].fddiMACTvxValue < (u_long) (- US2BCLK(52))) {
+ outpw(FM_A(FM_TVX), (u_short) (- US2BCLK(52))/255 & MB) ;
+ } else {
+ outpw(FM_A(FM_TVX),
+ (u_short)((smc->mib.m[MAC0].fddiMACTvxValue/255) & MB)) ;
+ }
+
+ outpw(FM_A(FM_CMDREG1),FM_ICLLS) ; /* clear s-frame lock */
+ outpw(FM_A(FM_CMDREG1),FM_ICLLA0) ; /* clear a-frame lock */
+ outpw(FM_A(FM_CMDREG1),FM_ICLLR); /* clear receive lock */
+
+ /* Auto unlock receice threshold for receive queue 1 and 2 */
+ outpw(FM_A(FM_UNLCKDLY),(0xff|(0xff<<8))) ;
+
+ rtm_init(smc) ; /* RT-Monitor */
+
+ if (!all) {
+ /*
+ * after 10ms, reset the BMUs and repair the rings
+ */
+ hwt_wait_time(smc,time,MS2BCLK(10)) ;
+ outpd(ADDR(B0_R1_CSR),CSR_SET_RESET) ;
+ outpd(ADDR(B0_XA_CSR),CSR_SET_RESET) ;
+ outpd(ADDR(B0_XS_CSR),CSR_SET_RESET) ;
+ outp(ADDR(B0_CTRL), CTRL_HPI_CLR) ;
+ outpd(ADDR(B0_R1_CSR),CSR_CLR_RESET) ;
+ outpd(ADDR(B0_XA_CSR),CSR_CLR_RESET) ;
+ outpd(ADDR(B0_XS_CSR),CSR_CLR_RESET) ;
+ if (!smc->hw.hw_is_64bit) {
+ outpd(ADDR(B4_R1_F), RX_WATERMARK) ;
+ outpd(ADDR(B5_XA_F), TX_WATERMARK) ;
+ outpd(ADDR(B5_XS_F), TX_WATERMARK) ;
+ }
+ smc->hw.hw_state = STOPPED ;
+ mac_drv_repair_descr(smc) ;
+ }
+ smc->hw.hw_state = STARTED ;
+
+ return 0;
+}
+
+
+/*
+ * called by CFM
+ */
+void config_mux(struct s_smc *smc, int mux)
+{
+ plc_config_mux(smc,mux) ;
+
+ SETMASK(FM_A(FM_MDREG1),FM_SELRA,FM_SELRA) ;
+}
+
+/*
+ * called by RMT
+ * enable CLAIM/BEACON interrupts
+ * (only called if these events are of interest, e.g. in DETECT state
+ * the interrupt must not be permanently enabled
+ * RMT calls this function periodically (timer driven polling)
+ */
+void sm_mac_check_beacon_claim(struct s_smc *smc)
+{
+ /* set formac IMSK : 0 enables irq */
+ outpw(FM_A(FM_IMSK2U),~(mac_imsk2u | mac_beacon_imsk2u)) ;
+ /* the driver must receive the directed beacons */
+ formac_rcv_restart(smc) ;
+ process_receive(smc) ;
+}
+
+/*-------------------------- interface functions ----------------------------*/
+/*
+ * control MAC layer (called by RMT)
+ */
+void sm_ma_control(struct s_smc *smc, int mode)
+{
+ switch(mode) {
+ case MA_OFFLINE :
+ /* Add to make the MAC offline in RM0_ISOLATED state */
+ formac_offline(smc) ;
+ break ;
+ case MA_RESET :
+ (void)init_mac(smc,0) ;
+ break ;
+ case MA_BEACON :
+ formac_online(smc) ;
+ break ;
+ case MA_DIRECTED :
+ directed_beacon(smc) ;
+ break ;
+ case MA_TREQ :
+ /*
+ * no actions necessary, TREQ is already set
+ */
+ break ;
+ }
+}
+
+int sm_mac_get_tx_state(struct s_smc *smc)
+{
+ return (inpw(FM_A(FM_STMCHN))>>4) & 7;
+}
+
+/*
+ * multicast functions
+ */
+
+static struct s_fpmc* mac_get_mc_table(struct s_smc *smc,
+ struct fddi_addr *user,
+ struct fddi_addr *own,
+ int del, int can)
+{
+ struct s_fpmc *tb ;
+ struct s_fpmc *slot ;
+ u_char *p ;
+ int i ;
+
+ /*
+ * set own = can(user)
+ */
+ *own = *user ;
+ if (can) {
+ p = own->a ;
+ for (i = 0 ; i < 6 ; i++, p++)
+ *p = bitrev8(*p);
+ }
+ slot = NULL;
+ for (i = 0, tb = smc->hw.fp.mc.table ; i < FPMAX_MULTICAST ; i++, tb++){
+ if (!tb->n) { /* not used */
+ if (!del && !slot) /* if !del save first free */
+ slot = tb ;
+ continue ;
+ }
+ if (!ether_addr_equal((char *)&tb->a, (char *)own))
+ continue ;
+ return tb;
+ }
+ return slot; /* return first free or NULL */
+}
+
+/*
+ BEGIN_MANUAL_ENTRY(if,func;others;2)
+
+ void mac_clear_multicast(smc)
+ struct s_smc *smc ;
+
+Function DOWNCALL (SMT, fplustm.c)
+ Clear all multicast entries
+
+ END_MANUAL_ENTRY()
+ */
+void mac_clear_multicast(struct s_smc *smc)
+{
+ struct s_fpmc *tb ;
+ int i ;
+
+ smc->hw.fp.os_slots_used = 0 ; /* note the SMT addresses */
+ /* will not be deleted */
+ for (i = 0, tb = smc->hw.fp.mc.table ; i < FPMAX_MULTICAST ; i++, tb++){
+ if (!tb->perm) {
+ tb->n = 0 ;
+ }
+ }
+}
+
+/*
+ BEGIN_MANUAL_ENTRY(if,func;others;2)
+
+ int mac_add_multicast(smc,addr,can)
+ struct s_smc *smc ;
+ struct fddi_addr *addr ;
+ int can ;
+
+Function DOWNCALL (SMC, fplustm.c)
+ Add an entry to the multicast table
+
+Para addr pointer to a multicast address
+ can = 0: the multicast address has the physical format
+ = 1: the multicast address has the canonical format
+ | 0x80 permanent
+
+Returns 0: success
+ 1: address table full
+
+Note After a 'driver reset' or a 'station set address' all
+ entries of the multicast table are cleared.
+ In this case the driver has to fill the multicast table again.
+ After the operating system dependent module filled
+ the multicast table it must call mac_update_multicast
+ to activate the new multicast addresses!
+
+ END_MANUAL_ENTRY()
+ */
+int mac_add_multicast(struct s_smc *smc, struct fddi_addr *addr, int can)
+{
+ SK_LOC_DECL(struct fddi_addr,own) ;
+ struct s_fpmc *tb ;
+
+ /*
+ * check if there are free table entries
+ */
+ if (can & 0x80) {
+ if (smc->hw.fp.smt_slots_used >= SMT_MAX_MULTI) {
+ return 1;
+ }
+ }
+ else {
+ if (smc->hw.fp.os_slots_used >= FPMAX_MULTICAST-SMT_MAX_MULTI) {
+ return 1;
+ }
+ }
+
+ /*
+ * find empty slot
+ */
+ if (!(tb = mac_get_mc_table(smc,addr,&own,0,can & ~0x80)))
+ return 1;
+ tb->n++ ;
+ tb->a = own ;
+ tb->perm = (can & 0x80) ? 1 : 0 ;
+
+ if (can & 0x80)
+ smc->hw.fp.smt_slots_used++ ;
+ else
+ smc->hw.fp.os_slots_used++ ;
+
+ return 0;
+}
+
+/*
+ * mode
+ */
+
+#define RX_MODE_PROM 0x1
+#define RX_MODE_ALL_MULTI 0x2
+
+/*
+ BEGIN_MANUAL_ENTRY(if,func;others;2)
+
+ void mac_update_multicast(smc)
+ struct s_smc *smc ;
+
+Function DOWNCALL (SMT, fplustm.c)
+ Update FORMAC multicast registers
+
+ END_MANUAL_ENTRY()
+ */
+void mac_update_multicast(struct s_smc *smc)
+{
+ struct s_fpmc *tb ;
+ u_char *fu ;
+ int i ;
+
+ /*
+ * invalidate the CAM
+ */
+ outpw(FM_A(FM_AFCMD),FM_IINV_CAM) ;
+
+ /*
+ * set the functional address
+ */
+ if (smc->hw.fp.func_addr) {
+ fu = (u_char *) &smc->hw.fp.func_addr ;
+ outpw(FM_A(FM_AFMASK2),0xffff) ;
+ outpw(FM_A(FM_AFMASK1),(u_short) ~((fu[0] << 8) + fu[1])) ;
+ outpw(FM_A(FM_AFMASK0),(u_short) ~((fu[2] << 8) + fu[3])) ;
+ outpw(FM_A(FM_AFPERS),FM_VALID|FM_DA) ;
+ outpw(FM_A(FM_AFCOMP2), 0xc000) ;
+ outpw(FM_A(FM_AFCOMP1), 0x0000) ;
+ outpw(FM_A(FM_AFCOMP0), 0x0000) ;
+ outpw(FM_A(FM_AFCMD),FM_IWRITE_CAM) ;
+ }
+
+ /*
+ * set the mask and the personality register(s)
+ */
+ outpw(FM_A(FM_AFMASK0),0xffff) ;
+ outpw(FM_A(FM_AFMASK1),0xffff) ;
+ outpw(FM_A(FM_AFMASK2),0xffff) ;
+ outpw(FM_A(FM_AFPERS),FM_VALID|FM_DA) ;
+
+ for (i = 0, tb = smc->hw.fp.mc.table; i < FPMAX_MULTICAST; i++, tb++) {
+ if (tb->n) {
+ CHECK_CAM() ;
+
+ /*
+ * write the multicast address into the CAM
+ */
+ outpw(FM_A(FM_AFCOMP2),
+ (u_short)((tb->a.a[0]<<8)+tb->a.a[1])) ;
+ outpw(FM_A(FM_AFCOMP1),
+ (u_short)((tb->a.a[2]<<8)+tb->a.a[3])) ;
+ outpw(FM_A(FM_AFCOMP0),
+ (u_short)((tb->a.a[4]<<8)+tb->a.a[5])) ;
+ outpw(FM_A(FM_AFCMD),FM_IWRITE_CAM) ;
+ }
+ }
+}
+
+/*
+ BEGIN_MANUAL_ENTRY(if,func;others;3)
+
+ void mac_set_rx_mode(smc,mode)
+ struct s_smc *smc ;
+ int mode ;
+
+Function DOWNCALL/INTERN (SMT, fplustm.c)
+ This function enables / disables the selected receive.
+ Don't call this function if the hardware module is
+ used -- use mac_drv_rx_mode() instead of.
+
+Para mode = 1 RX_ENABLE_ALLMULTI enable all multicasts
+ 2 RX_DISABLE_ALLMULTI disable "enable all multicasts"
+ 3 RX_ENABLE_PROMISC enable promiscuous
+ 4 RX_DISABLE_PROMISC disable promiscuous
+ 5 RX_ENABLE_NSA enable reception of NSA frames
+ 6 RX_DISABLE_NSA disable reception of NSA frames
+
+Note The selected receive modes will be lost after 'driver reset'
+ or 'set station address'
+
+ END_MANUAL_ENTRY
+ */
+void mac_set_rx_mode(struct s_smc *smc, int mode)
+{
+ switch (mode) {
+ case RX_ENABLE_ALLMULTI :
+ smc->hw.fp.rx_prom |= RX_MODE_ALL_MULTI ;
+ break ;
+ case RX_DISABLE_ALLMULTI :
+ smc->hw.fp.rx_prom &= ~RX_MODE_ALL_MULTI ;
+ break ;
+ case RX_ENABLE_PROMISC :
+ smc->hw.fp.rx_prom |= RX_MODE_PROM ;
+ break ;
+ case RX_DISABLE_PROMISC :
+ smc->hw.fp.rx_prom &= ~RX_MODE_PROM ;
+ break ;
+ case RX_ENABLE_NSA :
+ smc->hw.fp.nsa_mode = FM_MDAMA ;
+ smc->hw.fp.rx_mode = (smc->hw.fp.rx_mode & ~FM_ADDET) |
+ smc->hw.fp.nsa_mode ;
+ break ;
+ case RX_DISABLE_NSA :
+ smc->hw.fp.nsa_mode = FM_MRNNSAFNMA ;
+ smc->hw.fp.rx_mode = (smc->hw.fp.rx_mode & ~FM_ADDET) |
+ smc->hw.fp.nsa_mode ;
+ break ;
+ }
+ if (smc->hw.fp.rx_prom & RX_MODE_PROM) {
+ smc->hw.fp.rx_mode = FM_MLIMPROM ;
+ }
+ else if (smc->hw.fp.rx_prom & RX_MODE_ALL_MULTI) {
+ smc->hw.fp.rx_mode = smc->hw.fp.nsa_mode | FM_EXGPA0 ;
+ }
+ else
+ smc->hw.fp.rx_mode = smc->hw.fp.nsa_mode ;
+ SETMASK(FM_A(FM_MDREG1),smc->hw.fp.rx_mode,FM_ADDRX) ;
+ mac_update_multicast(smc) ;
+}
+
+/*
+ BEGIN_MANUAL_ENTRY(module;tests;3)
+ How to test the Restricted Token Monitor
+ ----------------------------------------------------------------
+
+ o Insert a break point in the function rtm_irq()
+ o Remove all stations with a restricted token monitor from the
+ network.
+ o Connect a UPPS ISA or EISA station to the network.
+ o Give the FORMAC of UPPS station the command to send
+ restricted tokens until the ring becomes instable.
+ o Now connect your test test client.
+ o The restricted token monitor should detect the restricted token,
+ and your break point will be reached.
+ o You can ovserve how the station will clean the ring.
+
+ END_MANUAL_ENTRY
+ */
+void rtm_irq(struct s_smc *smc)
+{
+ outpw(ADDR(B2_RTM_CRTL),TIM_CL_IRQ) ; /* clear IRQ */
+ if (inpw(ADDR(B2_RTM_CRTL)) & TIM_RES_TOK) {
+ outpw(FM_A(FM_CMDREG1),FM_ICL) ; /* force claim */
+ DB_RMT("RMT: fddiPATHT_Rmode expired\n",0,0) ;
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS,
+ (u_long) FDDI_SMT_EVENT,
+ (u_long) FDDI_RTT, smt_get_event_word(smc));
+ }
+ outpw(ADDR(B2_RTM_CRTL),TIM_START) ; /* enable RTM monitoring */
+}
+
+static void rtm_init(struct s_smc *smc)
+{
+ outpd(ADDR(B2_RTM_INI),0) ; /* timer = 0 */
+ outpw(ADDR(B2_RTM_CRTL),TIM_START) ; /* enable IRQ */
+}
+
+void rtm_set_timer(struct s_smc *smc)
+{
+ /*
+ * MIB timer and hardware timer have the same resolution of 80nS
+ */
+ DB_RMT("RMT: setting new fddiPATHT_Rmode, t = %d ns\n",
+ (int) smc->mib.a[PATH0].fddiPATHT_Rmode,0) ;
+ outpd(ADDR(B2_RTM_INI),smc->mib.a[PATH0].fddiPATHT_Rmode) ;
+}
+
+static void smt_split_up_fifo(struct s_smc *smc)
+{
+
+/*
+ BEGIN_MANUAL_ENTRY(module;mem;1)
+ -------------------------------------------------------------
+ RECEIVE BUFFER MEMORY DIVERSION
+ -------------------------------------------------------------
+
+ R1_RxD == SMT_R1_RXD_COUNT
+ R2_RxD == SMT_R2_RXD_COUNT
+
+ SMT_R1_RXD_COUNT must be unequal zero
+
+ | R1_RxD R2_RxD |R1_RxD R2_RxD | R1_RxD R2_RxD
+ | x 0 | x 1-3 | x < 3
+ ----------------------------------------------------------------------
+ | 63,75 kB | 54,75 | R1_RxD
+ rx queue 1 | RX_FIFO_SPACE | RX_LARGE_FIFO| ------------- * 63,75 kB
+ | | | R1_RxD+R2_RxD
+ ----------------------------------------------------------------------
+ | | 9 kB | R2_RxD
+ rx queue 2 | 0 kB | RX_SMALL_FIFO| ------------- * 63,75 kB
+ | (not used) | | R1_RxD+R2_RxD
+
+ END_MANUAL_ENTRY
+*/
+
+ if (SMT_R1_RXD_COUNT == 0) {
+ SMT_PANIC(smc,SMT_E0117, SMT_E0117_MSG) ;
+ }
+
+ switch(SMT_R2_RXD_COUNT) {
+ case 0:
+ smc->hw.fp.fifo.rx1_fifo_size = RX_FIFO_SPACE ;
+ smc->hw.fp.fifo.rx2_fifo_size = 0 ;
+ break ;
+ case 1:
+ case 2:
+ case 3:
+ smc->hw.fp.fifo.rx1_fifo_size = RX_LARGE_FIFO ;
+ smc->hw.fp.fifo.rx2_fifo_size = RX_SMALL_FIFO ;
+ break ;
+ default: /* this is not the real defaule */
+ smc->hw.fp.fifo.rx1_fifo_size = RX_FIFO_SPACE *
+ SMT_R1_RXD_COUNT/(SMT_R1_RXD_COUNT+SMT_R2_RXD_COUNT) ;
+ smc->hw.fp.fifo.rx2_fifo_size = RX_FIFO_SPACE *
+ SMT_R2_RXD_COUNT/(SMT_R1_RXD_COUNT+SMT_R2_RXD_COUNT) ;
+ break ;
+ }
+
+/*
+ BEGIN_MANUAL_ENTRY(module;mem;1)
+ -------------------------------------------------------------
+ TRANSMIT BUFFER MEMORY DIVERSION
+ -------------------------------------------------------------
+
+
+ | no sync bw | sync bw available and | sync bw available and
+ | available | SynchTxMode = SPLIT | SynchTxMode = ALL
+ -----------------------------------------------------------------------
+ sync tx | 0 kB | 32 kB | 55 kB
+ queue | | TX_MEDIUM_FIFO | TX_LARGE_FIFO
+ -----------------------------------------------------------------------
+ async tx | 64 kB | 32 kB | 9 k
+ queue | TX_FIFO_SPACE| TX_MEDIUM_FIFO | TX_SMALL_FIFO
+
+ END_MANUAL_ENTRY
+*/
+
+ /*
+ * set the tx mode bits
+ */
+ if (smc->mib.a[PATH0].fddiPATHSbaPayload) {
+#ifdef ESS
+ smc->hw.fp.fifo.fifo_config_mode |=
+ smc->mib.fddiESSSynchTxMode | SYNC_TRAFFIC_ON ;
+#endif
+ }
+ else {
+ smc->hw.fp.fifo.fifo_config_mode &=
+ ~(SEND_ASYNC_AS_SYNC|SYNC_TRAFFIC_ON) ;
+ }
+
+ /*
+ * split up the FIFO
+ */
+ if (smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON) {
+ if (smc->hw.fp.fifo.fifo_config_mode & SEND_ASYNC_AS_SYNC) {
+ smc->hw.fp.fifo.tx_s_size = TX_LARGE_FIFO ;
+ smc->hw.fp.fifo.tx_a0_size = TX_SMALL_FIFO ;
+ }
+ else {
+ smc->hw.fp.fifo.tx_s_size = TX_MEDIUM_FIFO ;
+ smc->hw.fp.fifo.tx_a0_size = TX_MEDIUM_FIFO ;
+ }
+ }
+ else {
+ smc->hw.fp.fifo.tx_s_size = 0 ;
+ smc->hw.fp.fifo.tx_a0_size = TX_FIFO_SPACE ;
+ }
+
+ smc->hw.fp.fifo.rx1_fifo_start = smc->hw.fp.fifo.rbc_ram_start +
+ RX_FIFO_OFF ;
+ smc->hw.fp.fifo.tx_s_start = smc->hw.fp.fifo.rx1_fifo_start +
+ smc->hw.fp.fifo.rx1_fifo_size ;
+ smc->hw.fp.fifo.tx_a0_start = smc->hw.fp.fifo.tx_s_start +
+ smc->hw.fp.fifo.tx_s_size ;
+ smc->hw.fp.fifo.rx2_fifo_start = smc->hw.fp.fifo.tx_a0_start +
+ smc->hw.fp.fifo.tx_a0_size ;
+
+ DB_SMT("FIFO split: mode = %x\n",smc->hw.fp.fifo.fifo_config_mode,0) ;
+ DB_SMT("rbc_ram_start = %x rbc_ram_end = %x\n",
+ smc->hw.fp.fifo.rbc_ram_start, smc->hw.fp.fifo.rbc_ram_end) ;
+ DB_SMT("rx1_fifo_start = %x tx_s_start = %x\n",
+ smc->hw.fp.fifo.rx1_fifo_start, smc->hw.fp.fifo.tx_s_start) ;
+ DB_SMT("tx_a0_start = %x rx2_fifo_start = %x\n",
+ smc->hw.fp.fifo.tx_a0_start, smc->hw.fp.fifo.rx2_fifo_start) ;
+}
+
+void formac_reinit_tx(struct s_smc *smc)
+{
+ /*
+ * Split up the FIFO and reinitialize the MAC if synchronous
+ * bandwidth becomes available but no synchronous queue is
+ * configured.
+ */
+ if (!smc->hw.fp.fifo.tx_s_size && smc->mib.a[PATH0].fddiPATHSbaPayload){
+ (void)init_mac(smc,0) ;
+ }
+}
+
diff --git a/drivers/net/fddi/skfp/h/cmtdef.h b/drivers/net/fddi/skfp/h/cmtdef.h
new file mode 100644
index 000000000..f5bc90ff2
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/cmtdef.h
@@ -0,0 +1,756 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _CMTDEF_
+#define _CMTDEF_
+
+/* **************************************************************** */
+
+/*
+ * implementation specific constants
+ * MODIIFY THE FOLLOWING THREE DEFINES
+ */
+#define AMDPLC /* if Amd PLC chip used */
+#ifdef CONC
+#define NUMPHYS 12 /* 2 for SAS or DAS, more for Concentrator */
+#else
+#ifdef CONC_II
+#define NUMPHYS 24 /* 2 for SAS or DAS, more for Concentrator */
+#else
+#define NUMPHYS 2 /* 2 for SAS or DAS, more for Concentrator */
+#endif
+#endif
+#define NUMMACS 1 /* only 1 supported at the moment */
+#define NUMPATHS 2 /* primary and secondary path supported */
+
+/*
+ * DO NOT MODIFY BEYOND THIS POINT
+ */
+
+/* **************************************************************** */
+
+#if NUMPHYS > 2
+#define CONCENTRATOR
+#endif
+
+/*
+ * Definitions for comfortable LINT usage
+ */
+#ifdef lint
+#define LINT_USE(x) (x)=(x)
+#else
+#define LINT_USE(x)
+#endif
+
+#ifdef DEBUG
+#define DB_PR(flag,a,b,c) { if (flag) printf(a,b,c) ; }
+#else
+#define DB_PR(flag,a,b,c)
+#endif
+
+#ifdef DEBUG_BRD
+#define DB_ECM(a,b,c) DB_PR((smc->debug.d_smt&1),a,b,c)
+#define DB_ECMN(n,a,b,c) DB_PR((smc->debug.d_ecm >=(n)),a,b,c)
+#define DB_RMT(a,b,c) DB_PR((smc->debug.d_smt&2),a,b,c)
+#define DB_RMTN(n,a,b,c) DB_PR((smc->debug.d_rmt >=(n)),a,b,c)
+#define DB_CFM(a,b,c) DB_PR((smc->debug.d_smt&4),a,b,c)
+#define DB_CFMN(n,a,b,c) DB_PR((smc->debug.d_cfm >=(n)),a,b,c)
+#define DB_PCM(a,b,c) DB_PR((smc->debug.d_smt&8),a,b,c)
+#define DB_PCMN(n,a,b,c) DB_PR((smc->debug.d_pcm >=(n)),a,b,c)
+#define DB_SMT(a,b,c) DB_PR((smc->debug.d_smtf),a,b,c)
+#define DB_SMTN(n,a,b,c) DB_PR((smc->debug.d_smtf >=(n)),a,b,c)
+#define DB_SBA(a,b,c) DB_PR((smc->debug.d_sba),a,b,c)
+#define DB_SBAN(n,a,b,c) DB_PR((smc->debug.d_sba >=(n)),a,b,c)
+#define DB_ESS(a,b,c) DB_PR((smc->debug.d_ess),a,b,c)
+#define DB_ESSN(n,a,b,c) DB_PR((smc->debug.d_ess >=(n)),a,b,c)
+#else
+#define DB_ECM(a,b,c) DB_PR((debug.d_smt&1),a,b,c)
+#define DB_ECMN(n,a,b,c) DB_PR((debug.d_ecm >=(n)),a,b,c)
+#define DB_RMT(a,b,c) DB_PR((debug.d_smt&2),a,b,c)
+#define DB_RMTN(n,a,b,c) DB_PR((debug.d_rmt >=(n)),a,b,c)
+#define DB_CFM(a,b,c) DB_PR((debug.d_smt&4),a,b,c)
+#define DB_CFMN(n,a,b,c) DB_PR((debug.d_cfm >=(n)),a,b,c)
+#define DB_PCM(a,b,c) DB_PR((debug.d_smt&8),a,b,c)
+#define DB_PCMN(n,a,b,c) DB_PR((debug.d_pcm >=(n)),a,b,c)
+#define DB_SMT(a,b,c) DB_PR((debug.d_smtf),a,b,c)
+#define DB_SMTN(n,a,b,c) DB_PR((debug.d_smtf >=(n)),a,b,c)
+#define DB_SBA(a,b,c) DB_PR((debug.d_sba),a,b,c)
+#define DB_SBAN(n,a,b,c) DB_PR((debug.d_sba >=(n)),a,b,c)
+#define DB_ESS(a,b,c) DB_PR((debug.d_ess),a,b,c)
+#define DB_ESSN(n,a,b,c) DB_PR((debug.d_ess >=(n)),a,b,c)
+#endif
+
+#ifndef SS_NOT_DS
+#define SK_LOC_DECL(type,var) type var
+#else
+#define SK_LOC_DECL(type,var) static type var
+#endif
+/*
+ * PHYs and PORTS
+ * Note: Don't touch the definition of PA and PB. Those might be used
+ * by some "for" loops.
+ */
+#define PA 0
+#define PB 1
+#if defined(SUPERNET_3) || defined(CONC_II)
+/*
+ * The port indices have to be different,
+ * because the MAC output goes through the 2. PLC
+ * Conc II: It has to be the first port in the row.
+ */
+#define PS 0 /* Internal PLC which is the same as PA */
+#else
+#define PS 1
+#endif
+#define PM 2 /* PM .. PA+NUM_PHYS-1 */
+
+/*
+ * PHY types - as in path descriptor 'fddiPHYType'
+ */
+#define TA 0 /* A port */
+#define TB 1 /* B port */
+#define TS 2 /* S port */
+#define TM 3 /* M port */
+#define TNONE 4
+
+
+/*
+ * indexes in MIB
+ */
+#define INDEX_MAC 1
+#define INDEX_PATH 1
+#define INDEX_PORT 1
+
+
+/*
+ * policies
+ */
+#define POLICY_AA (1<<0) /* reject AA */
+#define POLICY_AB (1<<1) /* reject AB */
+#define POLICY_AS (1<<2) /* reject AS */
+#define POLICY_AM (1<<3) /* reject AM */
+#define POLICY_BA (1<<4) /* reject BA */
+#define POLICY_BB (1<<5) /* reject BB */
+#define POLICY_BS (1<<6) /* reject BS */
+#define POLICY_BM (1<<7) /* reject BM */
+#define POLICY_SA (1<<8) /* reject SA */
+#define POLICY_SB (1<<9) /* reject SB */
+#define POLICY_SS (1<<10) /* reject SS */
+#define POLICY_SM (1<<11) /* reject SM */
+#define POLICY_MA (1<<12) /* reject MA */
+#define POLICY_MB (1<<13) /* reject MB */
+#define POLICY_MS (1<<14) /* reject MS */
+#define POLICY_MM (1<<15) /* reject MM */
+
+/*
+ * commands
+ */
+
+/*
+ * EVENTS
+ * event classes
+ */
+#define EVENT_ECM 1 /* event class ECM */
+#define EVENT_CFM 2 /* event class CFM */
+#define EVENT_RMT 3 /* event class RMT */
+#define EVENT_SMT 4 /* event class SMT */
+#define EVENT_PCM 5 /* event class PCM */
+#define EVENT_PCMA 5 /* event class PCMA */
+#define EVENT_PCMB 6 /* event class PCMB */
+
+/* WARNING :
+ * EVENT_PCM* must be last in the above list
+ * if more than two ports are used, EVENT_PCM .. EVENT_PCMA+NUM_PHYS-1
+ * are used !
+ */
+
+#define EV_TOKEN(class,event) (((u_long)(class)<<16L)|((u_long)(event)))
+#define EV_T_CLASS(token) ((int)((token)>>16)&0xffff)
+#define EV_T_EVENT(token) ((int)(token)&0xffff)
+
+/*
+ * ECM events
+ */
+#define EC_CONNECT 1 /* connect request */
+#define EC_DISCONNECT 2 /* disconnect request */
+#define EC_TRACE_PROP 3 /* trace propagation */
+#define EC_PATH_TEST 4 /* path test */
+#define EC_TIMEOUT_TD 5 /* timer TD_min */
+#define EC_TIMEOUT_TMAX 6 /* timer trace_max */
+#define EC_TIMEOUT_IMAX 7 /* timer I_max */
+#define EC_TIMEOUT_INMAX 8 /* timer IN_max */
+#define EC_TEST_DONE 9 /* path test done */
+
+/*
+ * CFM events
+ */
+#define CF_LOOP 1 /* cf_loop flag from PCM */
+#define CF_LOOP_A 1 /* cf_loop flag from PCM */
+#define CF_LOOP_B 2 /* cf_loop flag from PCM */
+#define CF_JOIN 3 /* cf_join flag from PCM */
+#define CF_JOIN_A 3 /* cf_join flag from PCM */
+#define CF_JOIN_B 4 /* cf_join flag from PCM */
+
+/*
+ * PCM events
+ */
+#define PC_START 1
+#define PC_STOP 2
+#define PC_LOOP 3
+#define PC_JOIN 4
+#define PC_SIGNAL 5
+#define PC_REJECT 6
+#define PC_MAINT 7
+#define PC_TRACE 8
+#define PC_PDR 9
+#define PC_ENABLE 10
+#define PC_DISABLE 11
+
+/*
+ * must be ordered as in LineStateType
+ */
+#define PC_QLS 12
+#define PC_ILS 13
+#define PC_MLS 14
+#define PC_HLS 15
+#define PC_LS_PDR 16
+#define PC_LS_NONE 17
+#define LS2MIB(x) ((x)-PC_QLS)
+#define MIB2LS(x) ((x)+PC_QLS)
+
+#define PC_TIMEOUT_TB_MAX 18 /* timer TB_max */
+#define PC_TIMEOUT_TB_MIN 19 /* timer TB_min */
+#define PC_TIMEOUT_C_MIN 20 /* timer C_Min */
+#define PC_TIMEOUT_T_OUT 21 /* timer T_Out */
+#define PC_TIMEOUT_TL_MIN 22 /* timer TL_Min */
+#define PC_TIMEOUT_T_NEXT 23 /* timer t_next[] */
+#define PC_TIMEOUT_LCT 24
+#define PC_NSE 25 /* NOISE hardware timer */
+#define PC_LEM 26 /* LEM done */
+
+/*
+ * RMT events meaning from
+ */
+#define RM_RING_OP 1 /* ring operational MAC */
+#define RM_RING_NON_OP 2 /* ring not operational MAC */
+#define RM_MY_BEACON 3 /* recvd my beacon MAC */
+#define RM_OTHER_BEACON 4 /* recvd other beacon MAC */
+#define RM_MY_CLAIM 5 /* recvd my claim MAC */
+#define RM_TRT_EXP 6 /* TRT exp MAC */
+#define RM_VALID_CLAIM 7 /* claim from dup addr MAC */
+#define RM_JOIN 8 /* signal rm_join CFM */
+#define RM_LOOP 9 /* signal rm_loop CFM */
+#define RM_DUP_ADDR 10 /* dup_addr_test hange SMT-NIF */
+#define RM_ENABLE_FLAG 11 /* enable flag */
+
+#define RM_TIMEOUT_NON_OP 12 /* timeout T_Non_OP */
+#define RM_TIMEOUT_T_STUCK 13 /* timeout T_Stuck */
+#define RM_TIMEOUT_ANNOUNCE 14 /* timeout T_Announce */
+#define RM_TIMEOUT_T_DIRECT 15 /* timeout T_Direct */
+#define RM_TIMEOUT_D_MAX 16 /* timeout D_Max */
+#define RM_TIMEOUT_POLL 17 /* claim/beacon poller */
+#define RM_TX_STATE_CHANGE 18 /* To restart timer for D_Max */
+
+/*
+ * SMT events
+ */
+#define SM_TIMER 1 /* timer */
+#define SM_FAST 2 /* smt_force_irq */
+
+/* PC modes */
+#define PM_NONE 0
+#define PM_PEER 1
+#define PM_TREE 2
+
+/*
+ * PCM withhold codes
+ * MIB PC-WithholdType ENUM
+ */
+#define PC_WH_NONE 0 /* ok */
+#define PC_WH_M_M 1 /* M to M */
+#define PC_WH_OTHER 2 /* other incompatible phys */
+#define PC_WH_PATH 3 /* path not available */
+/*
+ * LCT duration
+ */
+#define LC_SHORT 1 /* short LCT */
+#define LC_MEDIUM 2 /* medium LCT */
+#define LC_LONG 3 /* long LCT */
+#define LC_EXTENDED 4 /* extended LCT */
+
+/*
+ * path_test values
+ */
+#define PT_NONE 0
+#define PT_TESTING 1 /* test is running */
+#define PT_PASSED 2 /* test passed */
+#define PT_FAILED 3 /* test failed */
+#define PT_PENDING 4 /* path test follows */
+#define PT_EXITING 5 /* disconnected while in trace/leave */
+
+/*
+ * duplicate address test
+ * MIB DupAddressTest ENUM
+ */
+#define DA_NONE 0 /* */
+#define DA_PASSED 1 /* test passed */
+#define DA_FAILED 2 /* test failed */
+
+
+/*
+ * optical bypass
+ */
+#define BP_DEINSERT 0 /* disable bypass */
+#define BP_INSERT 1 /* enable bypass */
+
+/*
+ * ODL enable/disable
+ */
+#define PM_TRANSMIT_DISABLE 0 /* disable xmit */
+#define PM_TRANSMIT_ENABLE 1 /* enable xmit */
+
+/*
+ * parameter for config_mux
+ * note : number is index in config_endec table !
+ */
+#define MUX_THRUA 0 /* through A */
+#define MUX_THRUB 1 /* through B */
+#define MUX_WRAPA 2 /* wrap A */
+#define MUX_WRAPB 3 /* wrap B */
+#define MUX_ISOLATE 4 /* isolated */
+#define MUX_WRAPS 5 /* SAS */
+
+/*
+ * MAC control
+ */
+#define MA_RESET 0
+#define MA_BEACON 1
+#define MA_CLAIM 2
+#define MA_DIRECTED 3 /* directed beacon */
+#define MA_TREQ 4 /* change T_Req */
+#define MA_OFFLINE 5 /* switch MAC to offline */
+
+
+/*
+ * trace prop
+ * bit map for trace propagation
+ */
+#define ENTITY_MAC (NUMPHYS)
+#define ENTITY_PHY(p) (p)
+#define ENTITY_BIT(m) (1<<(m))
+
+/*
+ * Resource Tag Types
+ */
+#define PATH_ISO 0 /* isolated */
+#define PATH_PRIM 3 /* primary path */
+#define PATH_THRU 5 /* through path */
+
+#define RES_MAC 2 /* resource type MAC */
+#define RES_PORT 4 /* resource type PORT */
+
+
+/*
+ * CFM state
+ * oops: MUST MATCH CF-StateType in SMT7.2 !
+ */
+#define SC0_ISOLATED 0 /* isolated */
+#define SC1_WRAP_A 5 /* wrap A (not used) */
+#define SC2_WRAP_B 6 /* wrap B (not used) */
+#define SC4_THRU_A 12 /* through A */
+#define SC5_THRU_B 7 /* through B (used in SMT 6.2) */
+#define SC7_WRAP_S 8 /* SAS (not used) */
+#define SC9_C_WRAP_A 9 /* c wrap A */
+#define SC10_C_WRAP_B 10 /* c wrap B */
+#define SC11_C_WRAP_S 11 /* c wrap S */
+
+/*
+ * convert MIB time in units of 80nS to uS
+ */
+#define MIB2US(t) ((t)/12)
+#define SEC2MIB(s) ((s)*12500000L)
+/*
+ * SMT timer
+ */
+struct smt_timer {
+ struct smt_timer *tm_next ; /* linked list */
+ struct s_smc *tm_smc ; /* pointer to context */
+ u_long tm_delta ; /* delta time */
+ u_long tm_token ; /* token value */
+ u_short tm_active ; /* flag : active/inactive */
+ u_short tm_pad ; /* pad field */
+} ;
+
+/*
+ * communication structures
+ */
+struct mac_parameter {
+ u_long t_neg ; /* T_Neg parameter */
+ u_long t_pri ; /* T_Pri register in MAC */
+} ;
+
+/*
+ * MAC counters
+ */
+struct mac_counter {
+ u_long mac_nobuf_counter ; /* MAC SW counter: no buffer */
+ u_long mac_r_restart_counter ; /* MAC SW counter: rx restarted */
+} ;
+
+/*
+ * para struct context for SMT parameters
+ */
+struct s_pcon {
+ int pc_len ;
+ int pc_err ;
+ int pc_badset ;
+ void *pc_p ;
+} ;
+
+/*
+ * link error monitor
+ */
+#define LEM_AVG 5
+struct lem_counter {
+#ifdef AM29K
+ int lem_on ;
+ u_long lem_errors ;
+ u_long lem_symbols ;
+ u_long lem_tsymbols ;
+ int lem_s_count ;
+ int lem_n_s ;
+ int lem_values ;
+ int lem_index ;
+ int lem_avg_ber[LEM_AVG] ;
+ int lem_sum ;
+#else
+ u_short lem_float_ber ; /* 10E-nn bit error rate */
+ u_long lem_errors ; /* accumulated error count */
+ u_short lem_on ;
+#endif
+} ;
+
+#define NUMBITS 10
+
+#ifdef AMDPLC
+
+/*
+ * PLC state table
+ */
+struct s_plc {
+ u_short p_state ; /* current state */
+ u_short p_bits ; /* number of bits to send */
+ u_short p_start ; /* first bit pos */
+ u_short p_pad ; /* padding for alignment */
+ u_long soft_err ; /* error counter */
+ u_long parity_err ; /* error counter */
+ u_long ebuf_err ; /* error counter */
+ u_long ebuf_cont ; /* continuous error counter */
+ u_long phyinv ; /* error counter */
+ u_long vsym_ctr ; /* error counter */
+ u_long mini_ctr ; /* error counter */
+ u_long tpc_exp ; /* error counter */
+ u_long np_err ; /* error counter */
+ u_long b_pcs ; /* error counter */
+ u_long b_tpc ; /* error counter */
+ u_long b_tne ; /* error counter */
+ u_long b_qls ; /* error counter */
+ u_long b_ils ; /* error counter */
+ u_long b_hls ; /* error counter */
+} ;
+#endif
+
+#ifdef PROTOTYP_INC
+#include "fddi/driver.pro"
+#else /* PROTOTYP_INC */
+/*
+ * function prototypes
+ */
+#include "mbuf.h" /* Type definitions for MBUFs */
+#include "smtstate.h" /* struct smt_state */
+
+void hwt_restart(struct s_smc *smc); /* hwt.c */
+SMbuf *smt_build_frame(struct s_smc *smc, int class, int type,
+ int length); /* smt.c */
+SMbuf *smt_get_mbuf(struct s_smc *smc); /* drvsr.c */
+void *sm_to_para(struct s_smc *smc, struct smt_header *sm,
+ int para); /* smt.c */
+
+#ifndef SK_UNUSED
+#define SK_UNUSED(var) (void)(var)
+#endif
+
+void queue_event(struct s_smc *smc, int class, int event);
+void ecm(struct s_smc *smc, int event);
+void ecm_init(struct s_smc *smc);
+void rmt(struct s_smc *smc, int event);
+void rmt_init(struct s_smc *smc);
+void pcm(struct s_smc *smc, const int np, int event);
+void pcm_init(struct s_smc *smc);
+void cfm(struct s_smc *smc, int event);
+void cfm_init(struct s_smc *smc);
+void smt_timer_start(struct s_smc *smc, struct smt_timer *timer, u_long time,
+ u_long token);
+void smt_timer_stop(struct s_smc *smc, struct smt_timer *timer);
+void pcm_status_state(struct s_smc *smc, int np, int *type, int *state,
+ int *remote, int *mac);
+void plc_config_mux(struct s_smc *smc, int mux);
+void sm_lem_evaluate(struct s_smc *smc);
+void mac_update_counter(struct s_smc *smc);
+void sm_pm_ls_latch(struct s_smc *smc, int phy, int on_off);
+void sm_ma_control(struct s_smc *smc, int mode);
+void sm_mac_check_beacon_claim(struct s_smc *smc);
+void config_mux(struct s_smc *smc, int mux);
+void smt_agent_init(struct s_smc *smc);
+void smt_timer_init(struct s_smc *smc);
+void smt_received_pack(struct s_smc *smc, SMbuf *mb, int fs);
+void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
+ int index, int local);
+void smt_swap_para(struct smt_header *sm, int len, int direction);
+void ev_init(struct s_smc *smc);
+void hwt_init(struct s_smc *smc);
+u_long hwt_read(struct s_smc *smc);
+void hwt_stop(struct s_smc *smc);
+void hwt_start(struct s_smc *smc, u_long time);
+void smt_send_mbuf(struct s_smc *smc, SMbuf *mb, int fc);
+void smt_free_mbuf(struct s_smc *smc, SMbuf *mb);
+void sm_pm_bypass_req(struct s_smc *smc, int mode);
+void rmt_indication(struct s_smc *smc, int i);
+void cfm_state_change(struct s_smc *smc, int c_state);
+
+#if defined(DEBUG) || !defined(NO_SMT_PANIC)
+void smt_panic(struct s_smc *smc, char *text);
+#else
+#define smt_panic(smc,text)
+#endif /* DEBUG || !NO_SMT_PANIC */
+
+void smt_stat_counter(struct s_smc *smc, int stat);
+void smt_timer_poll(struct s_smc *smc);
+u_long smt_get_time(void);
+u_long smt_get_tid(struct s_smc *smc);
+void smt_timer_done(struct s_smc *smc);
+void smt_fixup_mib(struct s_smc *smc);
+void smt_reset_defaults(struct s_smc *smc, int level);
+void smt_agent_task(struct s_smc *smc);
+int smt_check_para(struct s_smc *smc, struct smt_header *sm,
+ const u_short list[]);
+void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr);
+
+#ifdef SUPERNET_3
+void drv_reset_indication(struct s_smc *smc);
+#endif /* SUPERNET_3 */
+
+void smt_start_watchdog(struct s_smc *smc);
+void smt_event(struct s_smc *smc, int event);
+void timer_event(struct s_smc *smc, u_long token);
+void ev_dispatcher(struct s_smc *smc);
+void pcm_get_state(struct s_smc *smc, struct smt_state *state);
+void ecm_state_change(struct s_smc *smc, int e_state);
+int sm_pm_bypass_present(struct s_smc *smc);
+void pcm_state_change(struct s_smc *smc, int plc, int p_state);
+void rmt_state_change(struct s_smc *smc, int r_state);
+int sm_pm_get_ls(struct s_smc *smc, int phy);
+int pcm_get_s_port(struct s_smc *smc);
+int pcm_rooted_station(struct s_smc *smc);
+int cfm_get_mac_input(struct s_smc *smc);
+int cfm_get_mac_output(struct s_smc *smc);
+int cem_build_path(struct s_smc *smc, char *to, int path_index);
+int sm_mac_get_tx_state(struct s_smc *smc);
+char *get_pcmstate(struct s_smc *smc, int np);
+int smt_action(struct s_smc *smc, int class, int code, int index);
+u_short smt_online(struct s_smc *smc, int on);
+void smt_force_irq(struct s_smc *smc);
+void smt_pmf_received_pack(struct s_smc *smc, SMbuf *mb, int local);
+void smt_send_frame(struct s_smc *smc, SMbuf *mb, int fc, int local);
+void smt_set_timestamp(struct s_smc *smc, u_char *p);
+void mac_set_rx_mode(struct s_smc *smc, int mode);
+int mac_add_multicast(struct s_smc *smc, struct fddi_addr *addr, int can);
+void mac_update_multicast(struct s_smc *smc);
+void mac_clear_multicast(struct s_smc *smc);
+void set_formac_tsync(struct s_smc *smc, long sync_bw);
+void formac_reinit_tx(struct s_smc *smc);
+void formac_tx_restart(struct s_smc *smc);
+void process_receive(struct s_smc *smc);
+void init_driver_fplus(struct s_smc *smc);
+void rtm_irq(struct s_smc *smc);
+void rtm_set_timer(struct s_smc *smc);
+void ring_status_indication(struct s_smc *smc, u_long status);
+void llc_recover_tx(struct s_smc *smc);
+void llc_restart_tx(struct s_smc *smc);
+void plc_clear_irq(struct s_smc *smc, int p);
+void plc_irq(struct s_smc *smc, int np, unsigned int cmd);
+int smt_set_mac_opvalues(struct s_smc *smc);
+
+#ifdef TAG_MODE
+void mac_do_pci_fix(struct s_smc *smc);
+void mac_drv_clear_tx_queue(struct s_smc *smc);
+void mac_drv_repair_descr(struct s_smc *smc);
+u_long hwt_quick_read(struct s_smc *smc);
+void hwt_wait_time(struct s_smc *smc, u_long start, long duration);
+#endif
+
+#ifdef SMT_PNMI
+int pnmi_init(struct s_smc* smc);
+int pnmi_process_ndis_id(struct s_smc *smc, u_long ndis_oid, void *buf, int len,
+ int *BytesAccessed, int *BytesNeeded, u_char action);
+#endif
+
+#ifdef SBA
+#ifndef _H2INC
+void sba();
+#endif
+void sba_raf_received_pack();
+void sba_timer_poll();
+void smt_init_sba();
+#endif
+
+#ifdef ESS
+int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
+ int fs);
+void ess_timer_poll(struct s_smc *smc);
+void ess_para_change(struct s_smc *smc);
+#endif
+
+#ifndef BOOT
+void smt_init_evc(struct s_smc *smc);
+void smt_srf_event(struct s_smc *smc, int code, int index, int cond);
+#else
+#define smt_init_evc(smc)
+#define smt_srf_event(smc,code,index,cond)
+#endif
+
+#ifndef SMT_REAL_TOKEN_CT
+void smt_emulate_token_ct(struct s_smc *smc, int mac_index);
+#endif
+
+#if defined(DEBUG) && !defined(BOOT)
+void dump_smt(struct s_smc *smc, struct smt_header *sm, char *text);
+#else
+#define dump_smt(smc,sm,text)
+#endif
+
+#ifdef DEBUG
+char* addr_to_string(struct fddi_addr *addr);
+void dump_hex(char *p, int len);
+#endif
+
+#endif /* PROTOTYP_INC */
+
+/* PNMI default defines */
+#ifndef PNMI_INIT
+#define PNMI_INIT(smc) /* Nothing */
+#endif
+#ifndef PNMI_GET_ID
+#define PNMI_GET_ID( smc, ndis_oid, buf, len, BytesWritten, BytesNeeded ) \
+ ( 1 ? (-1) : (-1) )
+#endif
+#ifndef PNMI_SET_ID
+#define PNMI_SET_ID( smc, ndis_oid, buf, len, BytesRead, BytesNeeded, \
+ set_type) ( 1 ? (-1) : (-1) )
+#endif
+
+/*
+ * SMT_PANIC defines
+ */
+#ifndef SMT_PANIC
+#define SMT_PANIC(smc,nr,msg) smt_panic (smc, msg)
+#endif
+
+#ifndef SMT_ERR_LOG
+#define SMT_ERR_LOG(smc,nr,msg) SMT_PANIC (smc, nr, msg)
+#endif
+
+#ifndef SMT_EBASE
+#define SMT_EBASE 100
+#endif
+
+#define SMT_E0100 SMT_EBASE + 0
+#define SMT_E0100_MSG "cfm FSM: invalid ce_type"
+#define SMT_E0101 SMT_EBASE + 1
+#define SMT_E0101_MSG "CEM: case ???"
+#define SMT_E0102 SMT_EBASE + 2
+#define SMT_E0102_MSG "CEM A: invalid state"
+#define SMT_E0103 SMT_EBASE + 3
+#define SMT_E0103_MSG "CEM B: invalid state"
+#define SMT_E0104 SMT_EBASE + 4
+#define SMT_E0104_MSG "CEM M: invalid state"
+#define SMT_E0105 SMT_EBASE + 5
+#define SMT_E0105_MSG "CEM S: invalid state"
+#define SMT_E0106 SMT_EBASE + 6
+#define SMT_E0106_MSG "CFM : invalid state"
+#define SMT_E0107 SMT_EBASE + 7
+#define SMT_E0107_MSG "ECM : invalid state"
+#define SMT_E0108 SMT_EBASE + 8
+#define SMT_E0108_MSG "prop_actions : NAC in DAS CFM"
+#define SMT_E0109 SMT_EBASE + 9
+#define SMT_E0109_MSG "ST2U.FM_SERRSF error in special frame"
+#define SMT_E0110 SMT_EBASE + 10
+#define SMT_E0110_MSG "ST2U.FM_SRFRCTOV recv. count. overflow"
+#define SMT_E0111 SMT_EBASE + 11
+#define SMT_E0111_MSG "ST2U.FM_SNFSLD NP & FORMAC simult. load"
+#define SMT_E0112 SMT_EBASE + 12
+#define SMT_E0112_MSG "ST2U.FM_SRCVFRM single-frame recv.-mode"
+#define SMT_E0113 SMT_EBASE + 13
+#define SMT_E0113_MSG "FPLUS: Buffer Memory Error"
+#define SMT_E0114 SMT_EBASE + 14
+#define SMT_E0114_MSG "ST2U.FM_SERRSF error in special frame"
+#define SMT_E0115 SMT_EBASE + 15
+#define SMT_E0115_MSG "ST3L: parity error in receive queue 2"
+#define SMT_E0116 SMT_EBASE + 16
+#define SMT_E0116_MSG "ST3L: parity error in receive queue 1"
+#define SMT_E0117 SMT_EBASE + 17
+#define SMT_E0117_MSG "E_SMT_001: RxD count for receive queue 1 = 0"
+#define SMT_E0118 SMT_EBASE + 18
+#define SMT_E0118_MSG "PCM : invalid state"
+#define SMT_E0119 SMT_EBASE + 19
+#define SMT_E0119_MSG "smt_add_para"
+#define SMT_E0120 SMT_EBASE + 20
+#define SMT_E0120_MSG "smt_set_para"
+#define SMT_E0121 SMT_EBASE + 21
+#define SMT_E0121_MSG "invalid event in dispatcher"
+#define SMT_E0122 SMT_EBASE + 22
+#define SMT_E0122_MSG "RMT : invalid state"
+#define SMT_E0123 SMT_EBASE + 23
+#define SMT_E0123_MSG "SBA: state machine has invalid state"
+#define SMT_E0124 SMT_EBASE + 24
+#define SMT_E0124_MSG "sba_free_session() called with NULL pointer"
+#define SMT_E0125 SMT_EBASE + 25
+#define SMT_E0125_MSG "SBA : invalid session pointer"
+#define SMT_E0126 SMT_EBASE + 26
+#define SMT_E0126_MSG "smt_free_mbuf() called with NULL pointer\n"
+#define SMT_E0127 SMT_EBASE + 27
+#define SMT_E0127_MSG "sizeof evcs"
+#define SMT_E0128 SMT_EBASE + 28
+#define SMT_E0128_MSG "evc->evc_cond_state = 0"
+#define SMT_E0129 SMT_EBASE + 29
+#define SMT_E0129_MSG "evc->evc_multiple = 0"
+#define SMT_E0130 SMT_EBASE + 30
+#define SMT_E0130_MSG write_mdr_warning
+#define SMT_E0131 SMT_EBASE + 31
+#define SMT_E0131_MSG cam_warning
+#define SMT_E0132 SMT_EBASE + 32
+#define SMT_E0132_MSG "ST1L.FM_SPCEPDx parity/coding error"
+#define SMT_E0133 SMT_EBASE + 33
+#define SMT_E0133_MSG "ST1L.FM_STBURx tx buffer underrun"
+#define SMT_E0134 SMT_EBASE + 34
+#define SMT_E0134_MSG "ST1L.FM_SPCEPDx parity error"
+#define SMT_E0135 SMT_EBASE + 35
+#define SMT_E0135_MSG "RMT: duplicate MAC address detected. Ring left!"
+#define SMT_E0136 SMT_EBASE + 36
+#define SMT_E0136_MSG "Elasticity Buffer hang-up"
+#define SMT_E0137 SMT_EBASE + 37
+#define SMT_E0137_MSG "SMT: queue overrun"
+#define SMT_E0138 SMT_EBASE + 38
+#define SMT_E0138_MSG "RMT: duplicate MAC address detected. Ring NOT left!"
+#endif /* _CMTDEF_ */
diff --git a/drivers/net/fddi/skfp/h/fddi.h b/drivers/net/fddi/skfp/h/fddi.h
new file mode 100644
index 000000000..c9a28a8a3
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/fddi.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _FDDI_
+#define _FDDI_
+
+struct fddi_addr {
+ u_char a[6] ;
+} ;
+
+#define GROUP_ADDR 0x80 /* MSB in a[0] */
+
+struct fddi_mac {
+ struct fddi_addr mac_dest ;
+ struct fddi_addr mac_source ;
+ u_char mac_info[4478] ;
+} ;
+
+#define FDDI_MAC_SIZE (12)
+#define FDDI_RAW_MTU (4500-5) /* exl. Pr,SD, ED/FS */
+#define FDDI_RAW (4500)
+
+/*
+ * FC values
+ */
+#define FC_VOID 0x40 /* void frame */
+#define FC_TOKEN 0x80 /* token */
+#define FC_RES_TOKEN 0xc0 /* restricted token */
+#define FC_SMT_INFO 0x41 /* SMT Info frame */
+/*
+ * FC_SMT_LAN_LOC && FC_SMT_LOC are SK specific !
+ */
+#define FC_SMT_LAN_LOC 0x42 /* local SMT Info frame */
+#define FC_SMT_LOC 0x43 /* local SMT Info frame */
+#define FC_SMT_NSA 0x4f /* SMT NSA frame */
+#define FC_MAC 0xc0 /* MAC frame */
+#define FC_BEACON 0xc2 /* MAC beacon frame */
+#define FC_CLAIM 0xc3 /* MAC claim frame */
+#define FC_SYNC_LLC 0xd0 /* sync. LLC frame */
+#define FC_ASYNC_LLC 0x50 /* async. LLC frame */
+#define FC_SYNC_BIT 0x80 /* sync. bit in FC */
+
+#define FC_LLC_PRIOR 0x07 /* priority bits */
+
+#define BEACON_INFO 0 /* beacon type */
+#define DBEACON_INFO 1 /* beacon type DIRECTED */
+
+
+/*
+ * indicator bits
+ */
+#define C_INDICATOR (1<<0)
+#define A_INDICATOR (1<<1)
+#define E_INDICATOR (1<<2)
+#define I_INDICATOR (1<<6) /* SK specific */
+#define L_INDICATOR (1<<7) /* SK specific */
+
+#endif /* _FDDI_ */
diff --git a/drivers/net/fddi/skfp/h/fddimib.h b/drivers/net/fddi/skfp/h/fddimib.h
new file mode 100644
index 000000000..d1acdc773
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/fddimib.h
@@ -0,0 +1,349 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * FDDI MIB
+ */
+
+/*
+ * typedefs
+ */
+
+typedef u_long Counter ;
+typedef u_char TimeStamp[8] ;
+typedef struct fddi_addr LongAddr ;
+typedef u_long Timer_2 ;
+typedef u_long Timer ;
+typedef u_short ResId ;
+typedef u_short SMTEnum ;
+typedef u_char SMTFlag ;
+
+typedef struct {
+ Counter count ;
+ TimeStamp timestamp ;
+} SetCountType ;
+
+/*
+ * bits for bit string "available_path"
+ */
+#define MIB_PATH_P (1<<0)
+#define MIB_PATH_S (1<<1)
+#define MIB_PATH_L (1<<2)
+
+/*
+ * bits for bit string PermittedPaths & RequestedPaths (SIZE(8))
+ */
+#define MIB_P_PATH_LOCAL (1<<0)
+#define MIB_P_PATH_SEC_ALTER (1<<1)
+#define MIB_P_PATH_PRIM_ALTER (1<<2)
+#define MIB_P_PATH_CON_ALTER (1<<3)
+#define MIB_P_PATH_SEC_PREFER (1<<4)
+#define MIB_P_PATH_PRIM_PREFER (1<<5)
+#define MIB_P_PATH_CON_PREFER (1<<6)
+#define MIB_P_PATH_THRU (1<<7)
+
+/*
+ * enum current path
+ */
+#define MIB_PATH_ISOLATED 0
+#define MIB_PATH_LOCAL 1
+#define MIB_PATH_SECONDARY 2
+#define MIB_PATH_PRIMARY 3
+#define MIB_PATH_CONCATENATED 4
+#define MIB_PATH_THRU 5
+
+/*
+ * enum PMDClass
+ */
+#define MIB_PMDCLASS_MULTI 0
+#define MIB_PMDCLASS_SINGLE1 1
+#define MIB_PMDCLASS_SINGLE2 2
+#define MIB_PMDCLASS_SONET 3
+#define MIB_PMDCLASS_LCF 4
+#define MIB_PMDCLASS_TP 5
+#define MIB_PMDCLASS_UNKNOWN 6
+#define MIB_PMDCLASS_UNSPEC 7
+
+/*
+ * enum SMTStationStatus
+ */
+#define MIB_SMT_STASTA_CON 0
+#define MIB_SMT_STASTA_SEPA 1
+#define MIB_SMT_STASTA_THRU 2
+
+
+struct fddi_mib {
+ /*
+ * private
+ */
+ u_char fddiPRPMFPasswd[8] ;
+ struct smt_sid fddiPRPMFStation ;
+
+#ifdef ESS
+ /*
+ * private variables for static allocation of the
+ * End Station Support
+ */
+ u_long fddiESSPayload ; /* payload for static alloc */
+ u_long fddiESSOverhead ; /* frame ov for static alloc */
+ u_long fddiESSMaxTNeg ; /* maximum of T-NEG */
+ u_long fddiESSMinSegmentSize ; /* min size of the sync frames */
+ u_long fddiESSCategory ; /* category for the Alloc req */
+ short fddiESSSynchTxMode ; /* send all LLC frames as sync */
+#endif /* ESS */
+#ifdef SBA
+ /*
+ * private variables for the Synchronous Bandwidth Allocator
+ */
+ char fddiSBACommand ; /* holds the parsed SBA cmd */
+ u_char fddiSBAAvailable ; /* SBA allocatable value */
+#endif /* SBA */
+
+ /*
+ * SMT standard mib
+ */
+ struct smt_sid fddiSMTStationId ;
+ u_short fddiSMTOpVersionId ;
+ u_short fddiSMTHiVersionId ;
+ u_short fddiSMTLoVersionId ;
+ u_char fddiSMTManufacturerData[32] ;
+ u_char fddiSMTUserData[32] ;
+ u_short fddiSMTMIBVersionId ;
+
+ /*
+ * ConfigGrp
+ */
+ u_char fddiSMTMac_Ct ;
+ u_char fddiSMTNonMaster_Ct ;
+ u_char fddiSMTMaster_Ct ;
+ u_char fddiSMTAvailablePaths ;
+ u_short fddiSMTConfigCapabilities ;
+ u_short fddiSMTConfigPolicy ;
+ u_short fddiSMTConnectionPolicy ;
+ u_short fddiSMTTT_Notify ;
+ u_char fddiSMTStatRptPolicy ;
+ u_long fddiSMTTrace_MaxExpiration ;
+ u_short fddiSMTPORTIndexes[NUMPHYS] ;
+ u_short fddiSMTMACIndexes ;
+ u_char fddiSMTBypassPresent ;
+
+ /*
+ * StatusGrp
+ */
+ SMTEnum fddiSMTECMState ;
+ SMTEnum fddiSMTCF_State ;
+ SMTEnum fddiSMTStationStatus ;
+ u_char fddiSMTRemoteDisconnectFlag ;
+ u_char fddiSMTPeerWrapFlag ;
+
+ /*
+ * MIBOperationGrp
+ */
+ TimeStamp fddiSMTTimeStamp ;
+ TimeStamp fddiSMTTransitionTimeStamp ;
+ SetCountType fddiSMTSetCount ;
+ struct smt_sid fddiSMTLastSetStationId ;
+
+ struct fddi_mib_m {
+ u_short fddiMACFrameStatusFunctions ;
+ Timer_2 fddiMACT_MaxCapabilitiy ;
+ Timer_2 fddiMACTVXCapabilitiy ;
+
+ /* ConfigGrp */
+ u_char fddiMACMultiple_N ; /* private */
+ u_char fddiMACMultiple_P ; /* private */
+ u_char fddiMACDuplicateAddressCond ;/* private */
+ u_char fddiMACAvailablePaths ;
+ u_short fddiMACCurrentPath ;
+ LongAddr fddiMACUpstreamNbr ;
+ LongAddr fddiMACDownstreamNbr ;
+ LongAddr fddiMACOldUpstreamNbr ;
+ LongAddr fddiMACOldDownstreamNbr ;
+ SMTEnum fddiMACDupAddressTest ;
+ u_short fddiMACRequestedPaths ;
+ SMTEnum fddiMACDownstreamPORTType ;
+ ResId fddiMACIndex ;
+
+ /* AddressGrp */
+ LongAddr fddiMACSMTAddress ;
+
+ /* OperationGrp */
+ Timer_2 fddiMACT_Min ; /* private */
+ Timer_2 fddiMACT_ReqMIB ;
+ Timer_2 fddiMACT_Req ; /* private */
+ Timer_2 fddiMACT_Neg ;
+ Timer_2 fddiMACT_MaxMIB ;
+ Timer_2 fddiMACT_Max ; /* private */
+ Timer_2 fddiMACTvxValueMIB ;
+ Timer_2 fddiMACTvxValue ; /* private */
+ Timer_2 fddiMACT_Pri0 ;
+ Timer_2 fddiMACT_Pri1 ;
+ Timer_2 fddiMACT_Pri2 ;
+ Timer_2 fddiMACT_Pri3 ;
+ Timer_2 fddiMACT_Pri4 ;
+ Timer_2 fddiMACT_Pri5 ;
+ Timer_2 fddiMACT_Pri6 ;
+
+ /* CountersGrp */
+ Counter fddiMACFrame_Ct ;
+ Counter fddiMACCopied_Ct ;
+ Counter fddiMACTransmit_Ct ;
+ Counter fddiMACToken_Ct ;
+ Counter fddiMACError_Ct ;
+ Counter fddiMACLost_Ct ;
+ Counter fddiMACTvxExpired_Ct ;
+ Counter fddiMACNotCopied_Ct ;
+ Counter fddiMACRingOp_Ct ;
+
+ Counter fddiMACSMTCopied_Ct ; /* private */
+ Counter fddiMACSMTTransmit_Ct ; /* private */
+
+ /* private for delta ratio */
+ Counter fddiMACOld_Frame_Ct ;
+ Counter fddiMACOld_Copied_Ct ;
+ Counter fddiMACOld_Error_Ct ;
+ Counter fddiMACOld_Lost_Ct ;
+ Counter fddiMACOld_NotCopied_Ct ;
+
+ /* FrameErrorConditionGrp */
+ u_short fddiMACFrameErrorThreshold ;
+ u_short fddiMACFrameErrorRatio ;
+
+ /* NotCopiedConditionGrp */
+ u_short fddiMACNotCopiedThreshold ;
+ u_short fddiMACNotCopiedRatio ;
+
+ /* StatusGrp */
+ SMTEnum fddiMACRMTState ;
+ SMTFlag fddiMACDA_Flag ;
+ SMTFlag fddiMACUNDA_Flag ;
+ SMTFlag fddiMACFrameErrorFlag ;
+ SMTFlag fddiMACNotCopiedFlag ;
+ SMTFlag fddiMACMA_UnitdataAvailable ;
+ SMTFlag fddiMACHardwarePresent ;
+ SMTFlag fddiMACMA_UnitdataEnable ;
+
+ } m[NUMMACS] ;
+#define MAC0 0
+
+ struct fddi_mib_a {
+ ResId fddiPATHIndex ;
+ u_long fddiPATHSbaPayload ;
+ u_long fddiPATHSbaOverhead ;
+ /* fddiPATHConfiguration is built on demand */
+ /* u_long fddiPATHConfiguration ; */
+ Timer fddiPATHT_Rmode ;
+ u_long fddiPATHSbaAvailable ;
+ Timer_2 fddiPATHTVXLowerBound ;
+ Timer_2 fddiPATHT_MaxLowerBound ;
+ Timer_2 fddiPATHMaxT_Req ;
+ } a[NUMPATHS] ;
+#define PATH0 0
+
+ struct fddi_mib_p {
+ /* ConfigGrp */
+ SMTEnum fddiPORTMy_Type ;
+ SMTEnum fddiPORTNeighborType ;
+ u_char fddiPORTConnectionPolicies ;
+ struct {
+ u_char T_val ;
+ u_char R_val ;
+ } fddiPORTMacIndicated ;
+ SMTEnum fddiPORTCurrentPath ;
+ /* must be 4: is 32 bit in SMT format
+ * indices :
+ * 1 none
+ * 2 tree
+ * 3 peer
+ */
+ u_char fddiPORTRequestedPaths[4] ;
+ u_short fddiPORTMACPlacement ;
+ u_char fddiPORTAvailablePaths ;
+ u_char fddiPORTConnectionCapabilities ;
+ SMTEnum fddiPORTPMDClass ;
+ ResId fddiPORTIndex ;
+
+ /* OperationGrp */
+ SMTEnum fddiPORTMaint_LS ;
+ SMTEnum fddiPORTPC_LS ;
+ u_char fddiPORTBS_Flag ;
+
+ /* ErrorCtrsGrp */
+ Counter fddiPORTLCTFail_Ct ;
+ Counter fddiPORTEBError_Ct ;
+ Counter fddiPORTOldEBError_Ct ;
+
+ /* LerGrp */
+ Counter fddiPORTLem_Reject_Ct ;
+ Counter fddiPORTLem_Ct ;
+ u_char fddiPORTLer_Estimate ;
+ u_char fddiPORTLer_Cutoff ;
+ u_char fddiPORTLer_Alarm ;
+
+ /* StatusGrp */
+ SMTEnum fddiPORTConnectState ;
+ SMTEnum fddiPORTPCMState ; /* real value */
+ SMTEnum fddiPORTPCMStateX ; /* value for MIB */
+ SMTEnum fddiPORTPC_Withhold ;
+ SMTFlag fddiPORTHardwarePresent ;
+ u_char fddiPORTLerFlag ;
+
+ u_char fddiPORTMultiple_U ; /* private */
+ u_char fddiPORTMultiple_P ; /* private */
+ u_char fddiPORTEB_Condition ; /* private */
+ } p[NUMPHYS] ;
+ struct {
+ Counter fddiPRIVECF_Req_Rx ; /* ECF req received */
+ Counter fddiPRIVECF_Reply_Rx ; /* ECF repl received */
+ Counter fddiPRIVECF_Req_Tx ; /* ECF req transm */
+ Counter fddiPRIVECF_Reply_Tx ; /* ECF repl transm */
+ Counter fddiPRIVPMF_Get_Rx ; /* PMF Get rec */
+ Counter fddiPRIVPMF_Set_Rx ; /* PMF Set rec */
+ Counter fddiPRIVRDF_Rx ; /* RDF received */
+ Counter fddiPRIVRDF_Tx ; /* RDF transmitted */
+ } priv ;
+} ;
+
+/*
+ * OIDs for statistics
+ */
+#define SMT_OID_CF_STATE 1 /* fddiSMTCF_State */
+#define SMT_OID_PCM_STATE_A 2 /* fddiPORTPCMState port A */
+#define SMT_OID_PCM_STATE_B 17 /* fddiPORTPCMState port B */
+#define SMT_OID_RMT_STATE 3 /* fddiMACRMTState */
+#define SMT_OID_UNA 4 /* fddiMACUpstreamNbr */
+#define SMT_OID_DNA 5 /* fddiMACOldDownstreamNbr */
+#define SMT_OID_ERROR_CT 6 /* fddiMACError_Ct */
+#define SMT_OID_LOST_CT 7 /* fddiMACLost_Ct */
+#define SMT_OID_LEM_CT 8 /* fddiPORTLem_Ct */
+#define SMT_OID_LEM_CT_A 11 /* fddiPORTLem_Ct port A */
+#define SMT_OID_LEM_CT_B 12 /* fddiPORTLem_Ct port B */
+#define SMT_OID_LCT_FAIL_CT 9 /* fddiPORTLCTFail_Ct */
+#define SMT_OID_LCT_FAIL_CT_A 13 /* fddiPORTLCTFail_Ct port A */
+#define SMT_OID_LCT_FAIL_CT_B 14 /* fddiPORTLCTFail_Ct port B */
+#define SMT_OID_LEM_REJECT_CT 10 /* fddiPORTLem_Reject_Ct */
+#define SMT_OID_LEM_REJECT_CT_A 15 /* fddiPORTLem_Reject_Ct port A */
+#define SMT_OID_LEM_REJECT_CT_B 16 /* fddiPORTLem_Reject_Ct port B */
+
+/*
+ * SK MIB
+ */
+#define SMT_OID_ECF_REQ_RX 20 /* ECF requests received */
+#define SMT_OID_ECF_REPLY_RX 21 /* ECF replies received */
+#define SMT_OID_ECF_REQ_TX 22 /* ECF requests transmitted */
+#define SMT_OID_ECF_REPLY_TX 23 /* ECF replies transmitted */
+#define SMT_OID_PMF_GET_RX 24 /* PMF get requests received */
+#define SMT_OID_PMF_SET_RX 25 /* PMF set requests received */
+#define SMT_OID_RDF_RX 26 /* RDF received */
+#define SMT_OID_RDF_TX 27 /* RDF transmitted */
diff --git a/drivers/net/fddi/skfp/h/fplustm.h b/drivers/net/fddi/skfp/h/fplustm.h
new file mode 100644
index 000000000..d43191ed9
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/fplustm.h
@@ -0,0 +1,274 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * AMD Fplus in tag mode data structs
+ * defs for fplustm.c
+ */
+
+#ifndef _FPLUS_
+#define _FPLUS_
+
+#ifndef HW_PTR
+#define HW_PTR void __iomem *
+#endif
+
+/*
+ * fplus error statistic structure
+ */
+struct err_st {
+ u_long err_valid ; /* memory status valid */
+ u_long err_abort ; /* memory status receive abort */
+ u_long err_e_indicator ; /* error indicator */
+ u_long err_crc ; /* error detected (CRC or length) */
+ u_long err_llc_frame ; /* LLC frame */
+ u_long err_mac_frame ; /* MAC frame */
+ u_long err_smt_frame ; /* SMT frame */
+ u_long err_imp_frame ; /* implementer frame */
+ u_long err_no_buf ; /* no buffer available */
+ u_long err_too_long ; /* longer than max. buffer */
+ u_long err_bec_stat ; /* beacon state entered */
+ u_long err_clm_stat ; /* claim state entered */
+ u_long err_sifg_det ; /* short interframe gap detect */
+ u_long err_phinv ; /* PHY invalid */
+ u_long err_tkiss ; /* token issued */
+ u_long err_tkerr ; /* token error */
+} ;
+
+/*
+ * Transmit Descriptor struct
+ */
+struct s_smt_fp_txd {
+ __le32 txd_tbctrl ; /* transmit buffer control */
+ __le32 txd_txdscr ; /* transmit frame status word */
+ __le32 txd_tbadr ; /* physical tx buffer address */
+ __le32 txd_ntdadr ; /* physical pointer to the next TxD */
+#ifdef ENA_64BIT_SUP
+ __le32 txd_tbadr_hi ; /* physical tx buffer addr (high dword)*/
+#endif
+ char far *txd_virt ; /* virtual pointer to the data frag */
+ /* virt pointer to the next TxD */
+ struct s_smt_fp_txd volatile far *txd_next ;
+ struct s_txd_os txd_os ; /* OS - specific struct */
+} ;
+
+/*
+ * Receive Descriptor struct
+ */
+struct s_smt_fp_rxd {
+ __le32 rxd_rbctrl ; /* receive buffer control */
+ __le32 rxd_rfsw ; /* receive frame status word */
+ __le32 rxd_rbadr ; /* physical rx buffer address */
+ __le32 rxd_nrdadr ; /* physical pointer to the next RxD */
+#ifdef ENA_64BIT_SUP
+ __le32 rxd_rbadr_hi ; /* physical tx buffer addr (high dword)*/
+#endif
+ char far *rxd_virt ; /* virtual pointer to the data frag */
+ /* virt pointer to the next RxD */
+ struct s_smt_fp_rxd volatile far *rxd_next ;
+ struct s_rxd_os rxd_os ; /* OS - specific struct */
+} ;
+
+/*
+ * Descriptor Union Definition
+ */
+union s_fp_descr {
+ struct s_smt_fp_txd t ; /* pointer to the TxD */
+ struct s_smt_fp_rxd r ; /* pointer to the RxD */
+} ;
+
+/*
+ * TxD Ring Control struct
+ */
+struct s_smt_tx_queue {
+ struct s_smt_fp_txd volatile *tx_curr_put ; /* next free TxD */
+ struct s_smt_fp_txd volatile *tx_prev_put ; /* shadow put pointer */
+ struct s_smt_fp_txd volatile *tx_curr_get ; /* next TxD to release*/
+ u_short tx_free ; /* count of free TxD's */
+ u_short tx_used ; /* count of used TxD's */
+ HW_PTR tx_bmu_ctl ; /* BMU addr for tx start */
+ HW_PTR tx_bmu_dsc ; /* BMU addr for curr dsc. */
+} ;
+
+/*
+ * RxD Ring Control struct
+ */
+struct s_smt_rx_queue {
+ struct s_smt_fp_rxd volatile *rx_curr_put ; /* next RxD to queue into */
+ struct s_smt_fp_rxd volatile *rx_prev_put ; /* shadow put pointer */
+ struct s_smt_fp_rxd volatile *rx_curr_get ; /* next RxD to fill */
+ u_short rx_free ; /* count of free RxD's */
+ u_short rx_used ; /* count of used RxD's */
+ HW_PTR rx_bmu_ctl ; /* BMU addr for rx start */
+ HW_PTR rx_bmu_dsc ; /* BMU addr for curr dsc. */
+} ;
+
+#define VOID_FRAME_OFF 0x00
+#define CLAIM_FRAME_OFF 0x08
+#define BEACON_FRAME_OFF 0x10
+#define DBEACON_FRAME_OFF 0x18
+#define RX_FIFO_OFF 0x21 /* to get a prime number for */
+ /* the RX_FIFO_SPACE */
+
+#define RBC_MEM_SIZE 0x8000
+#define SEND_ASYNC_AS_SYNC 0x1
+#define SYNC_TRAFFIC_ON 0x2
+
+/* big FIFO memory */
+#define RX_FIFO_SPACE 0x4000 - RX_FIFO_OFF
+#define TX_FIFO_SPACE 0x4000
+
+#define TX_SMALL_FIFO 0x0900
+#define TX_MEDIUM_FIFO TX_FIFO_SPACE / 2
+#define TX_LARGE_FIFO TX_FIFO_SPACE - TX_SMALL_FIFO
+
+#define RX_SMALL_FIFO 0x0900
+#define RX_LARGE_FIFO RX_FIFO_SPACE - RX_SMALL_FIFO
+
+struct s_smt_fifo_conf {
+ u_short rbc_ram_start ; /* FIFO start address */
+ u_short rbc_ram_end ; /* FIFO size */
+ u_short rx1_fifo_start ; /* rx queue start address */
+ u_short rx1_fifo_size ; /* rx queue size */
+ u_short rx2_fifo_start ; /* rx queue start address */
+ u_short rx2_fifo_size ; /* rx queue size */
+ u_short tx_s_start ; /* sync queue start address */
+ u_short tx_s_size ; /* sync queue size */
+ u_short tx_a0_start ; /* async queue A0 start address */
+ u_short tx_a0_size ; /* async queue A0 size */
+ u_short fifo_config_mode ; /* FIFO configuration mode */
+} ;
+
+#define FM_ADDRX (FM_ADDET|FM_EXGPA0|FM_EXGPA1)
+
+struct s_smt_fp {
+ u_short mdr2init ; /* mode register 2 init value */
+ u_short mdr3init ; /* mode register 3 init value */
+ u_short frselreg_init ; /* frame selection register init val */
+ u_short rx_mode ; /* address mode broad/multi/promisc */
+ u_short nsa_mode ;
+ u_short rx_prom ;
+ u_short exgpa ;
+
+ struct err_st err_stats ; /* error statistics */
+
+ /*
+ * MAC buffers
+ */
+ struct fddi_mac_sf { /* special frame build buffer */
+ u_char mac_fc ;
+ struct fddi_addr mac_dest ;
+ struct fddi_addr mac_source ;
+ u_char mac_info[0x20] ;
+ } mac_sfb ;
+
+
+ /*
+ * queues
+ */
+#define QUEUE_S 0
+#define QUEUE_A0 1
+#define QUEUE_R1 0
+#define QUEUE_R2 1
+#define USED_QUEUES 2
+
+ /*
+ * queue pointers; points to the queue dependent variables
+ */
+ struct s_smt_tx_queue *tx[USED_QUEUES] ;
+ struct s_smt_rx_queue *rx[USED_QUEUES] ;
+
+ /*
+ * queue dependent variables
+ */
+ struct s_smt_tx_queue tx_q[USED_QUEUES] ;
+ struct s_smt_rx_queue rx_q[USED_QUEUES] ;
+
+ /*
+ * FIFO configuration struct
+ */
+ struct s_smt_fifo_conf fifo ;
+
+ /* last formac status */
+ u_short s2u ;
+ u_short s2l ;
+
+ /* calculated FORMAC+ reg.addr. */
+ HW_PTR fm_st1u ;
+ HW_PTR fm_st1l ;
+ HW_PTR fm_st2u ;
+ HW_PTR fm_st2l ;
+ HW_PTR fm_st3u ;
+ HW_PTR fm_st3l ;
+
+
+ /*
+ * multicast table
+ */
+#define FPMAX_MULTICAST 32
+#define SMT_MAX_MULTI 4
+ struct {
+ struct s_fpmc {
+ struct fddi_addr a ; /* mc address */
+ u_char n ; /* usage counter */
+ u_char perm ; /* flag: permanent */
+ } table[FPMAX_MULTICAST] ;
+ } mc ;
+ struct fddi_addr group_addr ;
+ u_long func_addr ; /* functional address */
+ int smt_slots_used ; /* count of table entries for the SMT */
+ int os_slots_used ; /* count of table entries */
+ /* used by the os-specific module */
+} ;
+
+/*
+ * modes for mac_set_rx_mode()
+ */
+#define RX_ENABLE_ALLMULTI 1 /* enable all multicasts */
+#define RX_DISABLE_ALLMULTI 2 /* disable "enable all multicasts" */
+#define RX_ENABLE_PROMISC 3 /* enable promiscuous */
+#define RX_DISABLE_PROMISC 4 /* disable promiscuous */
+#define RX_ENABLE_NSA 5 /* enable reception of NSA frames */
+#define RX_DISABLE_NSA 6 /* disable reception of NSA frames */
+
+
+/*
+ * support for byte reversal in AIX
+ * (descriptors and pointers must be byte reversed in memory
+ * CPU is big endian; M-Channel is little endian)
+ */
+#ifdef AIX
+#define MDR_REV
+#define AIX_REVERSE(x) ((((x)<<24L)&0xff000000L) + \
+ (((x)<< 8L)&0x00ff0000L) + \
+ (((x)>> 8L)&0x0000ff00L) + \
+ (((x)>>24L)&0x000000ffL))
+#else
+#ifndef AIX_REVERSE
+#define AIX_REVERSE(x) (x)
+#endif
+#endif
+
+#ifdef MDR_REV
+#define MDR_REVERSE(x) ((((x)<<24L)&0xff000000L) + \
+ (((x)<< 8L)&0x00ff0000L) + \
+ (((x)>> 8L)&0x0000ff00L) + \
+ (((x)>>24L)&0x000000ffL))
+#else
+#ifndef MDR_REVERSE
+#define MDR_REVERSE(x) (x)
+#endif
+#endif
+
+#endif
diff --git a/drivers/net/fddi/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h
new file mode 100644
index 000000000..5924d4219
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/hwmtm.h
@@ -0,0 +1,399 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _HWM_
+#define _HWM_
+
+#include "mbuf.h"
+
+/*
+ * MACRO for DMA synchronization:
+ * The descriptor 'desc' is flushed for the device 'flag'.
+ * Devices are the CPU (DDI_DMA_SYNC_FORCPU) and the
+ * adapter (DDI_DMA_SYNC_FORDEV).
+ *
+ * 'desc' Pointer to a Rx or Tx descriptor.
+ * 'flag' Flag for direction (view for CPU or DEVICE) that
+ * should be synchronized.
+ *
+ * Empty macros and defines are specified here. The real macro
+ * is os-specific and should be defined in osdef1st.h.
+ */
+#ifndef DRV_BUF_FLUSH
+#define DRV_BUF_FLUSH(desc,flag)
+#define DDI_DMA_SYNC_FORCPU
+#define DDI_DMA_SYNC_FORDEV
+#endif
+
+ /*
+ * hardware modul dependent receive modes
+ */
+#define RX_ENABLE_PASS_SMT 21
+#define RX_DISABLE_PASS_SMT 22
+#define RX_ENABLE_PASS_NSA 23
+#define RX_DISABLE_PASS_NSA 24
+#define RX_ENABLE_PASS_DB 25
+#define RX_DISABLE_PASS_DB 26
+#define RX_DISABLE_PASS_ALL 27
+#define RX_DISABLE_LLC_PROMISC 28
+#define RX_ENABLE_LLC_PROMISC 29
+
+
+#ifndef DMA_RD
+#define DMA_RD 1 /* memory -> hw */
+#endif
+#ifndef DMA_WR
+#define DMA_WR 2 /* hw -> memory */
+#endif
+#define SMT_BUF 0x80
+
+ /*
+ * bits of the frame status byte
+ */
+#define EN_IRQ_EOF 0x02 /* get IRQ after end of frame transmission */
+#define LOC_TX 0x04 /* send frame to the local SMT */
+#define LAST_FRAG 0x08 /* last TxD of the frame */
+#define FIRST_FRAG 0x10 /* first TxD of the frame */
+#define LAN_TX 0x20 /* send frame to network if set */
+#define RING_DOWN 0x40 /* error: unable to send, ring down */
+#define OUT_OF_TXD 0x80 /* error: not enough TxDs available */
+
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#ifdef LITTLE_ENDIAN
+#define HWM_REVERSE(x) (x)
+#else
+#define HWM_REVERSE(x) ((((x)<<24L)&0xff000000L) + \
+ (((x)<< 8L)&0x00ff0000L) + \
+ (((x)>> 8L)&0x0000ff00L) + \
+ (((x)>>24L)&0x000000ffL))
+#endif
+
+#define C_INDIC (1L<<25)
+#define A_INDIC (1L<<26)
+#define RD_FS_LOCAL 0x80
+
+ /*
+ * DEBUG FLAGS
+ */
+#define DEBUG_SMTF 1
+#define DEBUG_SMT 2
+#define DEBUG_ECM 3
+#define DEBUG_RMT 4
+#define DEBUG_CFM 5
+#define DEBUG_PCM 6
+#define DEBUG_SBA 7
+#define DEBUG_ESS 8
+
+#define DB_HWM_RX 10
+#define DB_HWM_TX 11
+#define DB_HWM_GEN 12
+
+struct s_mbuf_pool {
+#ifndef MB_OUTSIDE_SMC
+ SMbuf mb[MAX_MBUF] ; /* mbuf pool */
+#endif
+ SMbuf *mb_start ; /* points to the first mb */
+ SMbuf *mb_free ; /* free queue */
+} ;
+
+struct hwm_r {
+ /*
+ * hardware modul specific receive variables
+ */
+ u_int len ; /* length of the whole frame */
+ char *mb_pos ; /* SMbuf receive position */
+} ;
+
+struct hw_modul {
+ /*
+ * All hardware modul specific variables
+ */
+ struct s_mbuf_pool mbuf_pool ;
+ struct hwm_r r ;
+
+ union s_fp_descr volatile *descr_p ; /* points to the desriptor area */
+
+ u_short pass_SMT ; /* pass SMT frames */
+ u_short pass_NSA ; /* pass all NSA frames */
+ u_short pass_DB ; /* pass Direct Beacon Frames */
+ u_short pass_llc_promisc ; /* pass all llc frames (default ON) */
+
+ SMbuf *llc_rx_pipe ; /* points to the first queued llc fr */
+ SMbuf *llc_rx_tail ; /* points to the last queued llc fr */
+ int queued_rx_frames ; /* number of queued frames */
+
+ SMbuf *txd_tx_pipe ; /* points to first mb in the txd ring */
+ SMbuf *txd_tx_tail ; /* points to last mb in the txd ring */
+ int queued_txd_mb ; /* number of SMT MBufs in txd ring */
+
+ int rx_break ; /* rev. was breaked because ind. off */
+ int leave_isr ; /* leave fddi_isr immedeately if set */
+ int isr_flag ; /* set, when HWM is entered from isr */
+ /*
+ * variables for the current transmit frame
+ */
+ struct s_smt_tx_queue *tx_p ; /* pointer to the transmit queue */
+ u_long tx_descr ; /* tx descriptor for FORMAC+ */
+ int tx_len ; /* tx frame length */
+ SMbuf *tx_mb ; /* SMT tx MBuf pointer */
+ char *tx_data ; /* data pointer to the SMT tx Mbuf */
+
+ int detec_count ; /* counter for out of RxD condition */
+ u_long rx_len_error ; /* rx len FORMAC != sum of fragments */
+} ;
+
+
+/*
+ * DEBUG structs and macros
+ */
+
+#ifdef DEBUG
+struct os_debug {
+ int hwm_rx ;
+ int hwm_tx ;
+ int hwm_gen ;
+} ;
+#endif
+
+#ifdef DEBUG
+#ifdef DEBUG_BRD
+#define DB_P smc->debug
+#else
+#define DB_P debug
+#endif
+
+#define DB_RX(a,b,c,lev) if (DB_P.d_os.hwm_rx >= (lev)) printf(a,b,c)
+#define DB_TX(a,b,c,lev) if (DB_P.d_os.hwm_tx >= (lev)) printf(a,b,c)
+#define DB_GEN(a,b,c,lev) if (DB_P.d_os.hwm_gen >= (lev)) printf(a,b,c)
+#else /* DEBUG */
+#define DB_RX(a,b,c,lev)
+#define DB_TX(a,b,c,lev)
+#define DB_GEN(a,b,c,lev)
+#endif /* DEBUG */
+
+#ifndef SK_BREAK
+#define SK_BREAK()
+#endif
+
+
+/*
+ * HWM Macros
+ */
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_TX_PHYS)
+ * u_long HWM_GET_TX_PHYS(txd)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to read
+ * the physical address of the specified TxD.
+ *
+ * para txd pointer to the TxD
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_TX_PHYS(txd) (u_long)AIX_REVERSE((txd)->txd_tbadr)
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_TX_LEN)
+ * int HWM_GET_TX_LEN(txd)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to read
+ * the fragment length of the specified TxD
+ *
+ * para rxd pointer to the TxD
+ *
+ * return the length of the fragment in bytes
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_TX_LEN(txd) ((int)AIX_REVERSE((txd)->txd_tbctrl)& RD_LENGTH)
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_TX_USED)
+ * txd *HWM_GET_TX_USED(smc,queue)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to get the
+ * number of used TxDs for the queue, specified by the index.
+ *
+ * para queue the number of the send queue: Can be specified by
+ * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
+ *
+ * return number of used TxDs for this send queue
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_TX_USED(smc,queue) (int) (smc)->hw.fp.tx_q[queue].tx_used
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_TXD)
+ * txd *HWM_GET_CURR_TXD(smc,queue)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to get the
+ * pointer to the TxD which points to the current queue put
+ * position.
+ *
+ * para queue the number of the send queue: Can be specified by
+ * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
+ *
+ * return pointer to the current TxD
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_CURR_TXD(smc,queue) (struct s_smt_fp_txd volatile *)\
+ (smc)->hw.fp.tx_q[queue].tx_curr_put
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN)
+ * int HWM_GET_RX_FRAG_LEN(rxd)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to read
+ * the fragment length of the specified RxD
+ *
+ * para rxd pointer to the RxD
+ *
+ * return the length of the fragment in bytes
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_RX_FRAG_LEN(rxd) ((int)AIX_REVERSE((rxd)->rxd_rbctrl)& \
+ RD_LENGTH)
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_RX_PHYS)
+ * u_long HWM_GET_RX_PHYS(rxd)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to read
+ * the physical address of the specified RxD.
+ *
+ * para rxd pointer to the RxD
+ *
+ * return the RxD's physical pointer to the data fragment
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_RX_PHYS(rxd) (u_long)AIX_REVERSE((rxd)->rxd_rbadr)
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_RX_USED)
+ * int HWM_GET_RX_USED(smc)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to get
+ * the count of used RXDs in receive queue 1.
+ *
+ * return the used RXD count of receive queue 1
+ *
+ * NOTE: Remember, because of an ASIC bug at least one RXD should be unused
+ * in the descriptor ring !
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_RX_USED(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_used)
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FREE)
+ * int HWM_GET_RX_FREE(smc)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to get
+ * the rxd_free count of receive queue 1.
+ *
+ * return the rxd_free count of receive queue 1
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_RX_FREE(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_free-1)
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_RXD)
+ * rxd *HWM_GET_CURR_RXD(smc)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro may be invoked by the OS-specific module to get the
+ * pointer to the RxD which points to the current queue put
+ * position.
+ *
+ * return pointer to the current RxD
+ *
+ * END_MANUAL_ENTRY
+ */
+#define HWM_GET_CURR_RXD(smc) (struct s_smt_fp_rxd volatile *)\
+ (smc)->hw.fp.rx_q[QUEUE_R1].rx_curr_put
+
+/*
+ * BEGIN_MANUAL_ENTRY(HWM_RX_CHECK)
+ * void HWM_RX_CHECK(smc,low_water)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This macro is invoked by the OS-specific before it left the
+ * function mac_drv_rx_complete. This macro calls mac_drv_fill_rxd
+ * if the number of used RxDs is equal or lower than the
+ * the given low water mark.
+ *
+ * para low_water low water mark of used RxD's
+ *
+ * END_MANUAL_ENTRY
+ */
+#ifndef HWM_NO_FLOW_CTL
+#define HWM_RX_CHECK(smc,low_water) {\
+ if ((low_water) >= (smc)->hw.fp.rx_q[QUEUE_R1].rx_used) {\
+ mac_drv_fill_rxd(smc) ;\
+ }\
+}
+#else
+#define HWM_RX_CHECK(smc,low_water) mac_drv_fill_rxd(smc)
+#endif
+
+#ifndef HWM_EBASE
+#define HWM_EBASE 500
+#endif
+
+#define HWM_E0001 HWM_EBASE + 1
+#define HWM_E0001_MSG "HWM: Wrong size of s_rxd_os struct"
+#define HWM_E0002 HWM_EBASE + 2
+#define HWM_E0002_MSG "HWM: Wrong size of s_txd_os struct"
+#define HWM_E0003 HWM_EBASE + 3
+#define HWM_E0003_MSG "HWM: smt_free_mbuf() called with NULL pointer"
+#define HWM_E0004 HWM_EBASE + 4
+#define HWM_E0004_MSG "HWM: Parity error rx queue 1"
+#define HWM_E0005 HWM_EBASE + 5
+#define HWM_E0005_MSG "HWM: Encoding error rx queue 1"
+#define HWM_E0006 HWM_EBASE + 6
+#define HWM_E0006_MSG "HWM: Encoding error async tx queue"
+#define HWM_E0007 HWM_EBASE + 7
+#define HWM_E0007_MSG "HWM: Encoding error sync tx queue"
+#define HWM_E0008 HWM_EBASE + 8
+#define HWM_E0008_MSG ""
+#define HWM_E0009 HWM_EBASE + 9
+#define HWM_E0009_MSG "HWM: Out of RxD condition detected"
+#define HWM_E0010 HWM_EBASE + 10
+#define HWM_E0010_MSG "HWM: A protocol layer has tried to send a frame with an invalid frame control"
+#define HWM_E0011 HWM_EBASE + 11
+#define HWM_E0011_MSG "HWM: mac_drv_clear_tx_queue was called although the hardware wasn't stopped"
+#define HWM_E0012 HWM_EBASE + 12
+#define HWM_E0012_MSG "HWM: mac_drv_clear_rx_queue was called although the hardware wasn't stopped"
+#define HWM_E0013 HWM_EBASE + 13
+#define HWM_E0013_MSG "HWM: mac_drv_repair_descr was called although the hardware wasn't stopped"
+
+#endif
diff --git a/drivers/net/fddi/skfp/h/mbuf.h b/drivers/net/fddi/skfp/h/mbuf.h
new file mode 100644
index 000000000..f2aadcda9
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/mbuf.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _MBUF_
+#define _MBUF_
+
+#define M_SIZE 4504
+
+#ifndef MAX_MBUF
+#define MAX_MBUF 4
+#endif
+
+#ifndef NO_STD_MBUF
+#define sm_next m_next
+#define sm_off m_off
+#define sm_len m_len
+#define sm_data m_data
+#define SMbuf Mbuf
+#define mtod smtod
+#define mtodoff smtodoff
+#endif
+
+struct s_mbuf {
+ struct s_mbuf *sm_next ; /* low level linked list */
+ short sm_off ; /* offset in m_data */
+ u_int sm_len ; /* len of data */
+#ifdef PCI
+ int sm_use_count ;
+#endif
+ char sm_data[M_SIZE] ;
+} ;
+
+typedef struct s_mbuf SMbuf ;
+
+/* mbuf head, to typed data */
+#define smtod(x,t) ((t)((x)->sm_data + (x)->sm_off))
+#define smtodoff(x,t,o) ((t)((x)->sm_data + (o)))
+
+#endif /* _MBUF_ */
diff --git a/drivers/net/fddi/skfp/h/osdef1st.h b/drivers/net/fddi/skfp/h/osdef1st.h
new file mode 100644
index 000000000..763ca18cb
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/osdef1st.h
@@ -0,0 +1,125 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * Operating system-dependent definitions that have to be defined
+ * before any other header files are included.
+ */
+
+// HWM (HardWare Module) Definitions
+// -----------------------
+
+#include <asm/byteorder.h>
+
+#ifdef __LITTLE_ENDIAN
+#define LITTLE_ENDIAN
+#else
+#define BIG_ENDIAN
+#endif
+
+// this is set in the makefile
+// #define PCI /* only PCI adapters supported by this driver */
+// #define MEM_MAPPED_IO /* use memory mapped I/O */
+
+
+#define USE_CAN_ADDR /* DA and SA in MAC header are canonical. */
+
+#define MB_OUTSIDE_SMC /* SMT Mbufs outside of smc struct. */
+
+// -----------------------
+
+
+// SMT Definitions
+// -----------------------
+#define SYNC /* allow synchronous frames */
+
+// #define SBA /* Synchronous Bandwidth Allocator support */
+ /* not available as free source */
+
+#define ESS /* SBA End Station Support */
+
+#define SMT_PANIC(smc, nr, msg) printk(KERN_INFO "SMT PANIC: code: %d, msg: %s\n",nr,msg)
+
+
+#ifdef DEBUG
+#define printf(s,args...) printk(KERN_INFO s, ## args)
+#endif
+
+// #define HW_PTR u_long
+// -----------------------
+
+
+
+// HWM and OS-specific buffer definitions
+// -----------------------
+
+// default number of receive buffers.
+#define NUM_RECEIVE_BUFFERS 10
+
+// default number of transmit buffers.
+#define NUM_TRANSMIT_BUFFERS 10
+
+// Number of SMT buffers (Mbufs).
+#define NUM_SMT_BUF 4
+
+// Number of TXDs for asynchronous transmit queue.
+#define HWM_ASYNC_TXD_COUNT (NUM_TRANSMIT_BUFFERS + NUM_SMT_BUF)
+
+// Number of TXDs for synchronous transmit queue.
+#define HWM_SYNC_TXD_COUNT HWM_ASYNC_TXD_COUNT
+
+
+// Number of RXDs for receive queue #1.
+// Note: Workaround for ASIC Errata #7: One extra RXD is required.
+#if (NUM_RECEIVE_BUFFERS > 100)
+#define SMT_R1_RXD_COUNT (1 + 100)
+#else
+#define SMT_R1_RXD_COUNT (1 + NUM_RECEIVE_BUFFERS)
+#endif
+
+// Number of RXDs for receive queue #2.
+#define SMT_R2_RXD_COUNT 0 // Not used.
+// -----------------------
+
+
+
+/*
+ * OS-specific part of the transmit/receive descriptor structure (TXD/RXD).
+ *
+ * Note: The size of these structures must follow this rule:
+ *
+ * sizeof(struct) + 2*sizeof(void*) == n * 16, n >= 1
+ *
+ * We use the dma_addr fields under Linux to keep track of the
+ * DMA address of the packet data, for later pci_unmap_single. -DaveM
+ */
+
+struct s_txd_os { // os-specific part of transmit descriptor
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+} ;
+
+struct s_rxd_os { // os-specific part of receive descriptor
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+} ;
+
+
+/*
+ * So we do not need to make too many modifications to the generic driver
+ * parts, we take advantage of the AIX byte swapping macro interface.
+ */
+
+#define AIX_REVERSE(x) ((u32)le32_to_cpu((u32)(x)))
+#define MDR_REVERSE(x) ((u32)le32_to_cpu((u32)(x)))
diff --git a/drivers/net/fddi/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h
new file mode 100644
index 000000000..35ddb44a1
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/sba.h
@@ -0,0 +1,142 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * Synchronous Bandwidth Allocation (SBA) structs
+ */
+
+#ifndef _SBA_
+#define _SBA_
+
+#include "mbuf.h"
+#include "sba_def.h"
+
+#ifdef SBA
+
+/* Timer Cell Template */
+struct timer_cell {
+ struct timer_cell *next_ptr ;
+ struct timer_cell *prev_ptr ;
+ u_long start_time ;
+ struct s_sba_node_vars *node_var ;
+} ;
+
+/*
+ * Node variables
+ */
+struct s_sba_node_vars {
+ u_char change_resp_flag ;
+ u_char report_resp_flag ;
+ u_char change_req_flag ;
+ u_char report_req_flag ;
+ long change_amount ;
+ long node_overhead ;
+ long node_payload ;
+ u_long node_status ;
+ u_char deallocate_status ;
+ u_char timer_state ;
+ u_short report_cnt ;
+ long lastrep_req_tranid ;
+ struct fddi_addr mac_address ;
+ struct s_sba_sessions *node_sessions ;
+ struct timer_cell timer ;
+} ;
+
+/*
+ * Session variables
+ */
+struct s_sba_sessions {
+ u_long deallocate_status ;
+ long session_overhead ;
+ u_long min_segment_size ;
+ long session_payload ;
+ u_long session_status ;
+ u_long sba_category ;
+ long lastchg_req_tranid ;
+ u_short session_id ;
+ u_char class ;
+ u_char fddi2 ;
+ u_long max_t_neg ;
+ struct s_sba_sessions *next_session ;
+} ;
+
+struct s_sba {
+
+ struct s_sba_node_vars node[MAX_NODES] ;
+ struct s_sba_sessions session[MAX_SESSIONS] ;
+
+ struct s_sba_sessions *free_session ; /* points to the first */
+ /* free session */
+
+ struct timer_cell *tail_timer ; /* points to the last timer cell */
+
+ /*
+ * variables for allocation actions
+ */
+ long total_payload ; /* Total Payload */
+ long total_overhead ; /* Total Overhead */
+ long sba_allocatable ; /* allocatable sync bandwidth */
+
+ /*
+ * RAF message receive parameters
+ */
+ long msg_path_index ; /* Path Type */
+ long msg_sba_pl_req ; /* Payload Request */
+ long msg_sba_ov_req ; /* Overhead Request */
+ long msg_mib_pl ; /* Current Payload for this Path */
+ long msg_mib_ov ; /* Current Overhead for this Path*/
+ long msg_category ; /* Category of the Allocation */
+ u_long msg_max_t_neg ; /* longest T_Neg acceptable */
+ u_long msg_min_seg_siz ; /* minimum segement size */
+ struct smt_header *sm ; /* points to the rec message */
+ struct fddi_addr *msg_alloc_addr ; /* Allocation Address */
+
+ /*
+ * SBA variables
+ */
+ u_long sba_t_neg ; /* holds the last T_NEG */
+ long sba_max_alloc ; /* the parsed value of SBAAvailable */
+
+ /*
+ * SBA state machine variables
+ */
+ short sba_next_state ; /* the next state of the SBA */
+ char sba_command ; /* holds the execuded SBA cmd */
+ u_char sba_available ; /* parsed value after possible check */
+} ;
+
+#endif /* SBA */
+
+ /*
+ * variables for the End Station Support
+ */
+struct s_ess {
+
+ /*
+ * flags and counters
+ */
+ u_char sync_bw_available ; /* is set if sync bw is allocated */
+ u_char local_sba_active ; /* set when a local sba is available */
+ char raf_act_timer_poll ; /* activate the timer to send allc req */
+ char timer_count ; /* counts every timer function call */
+
+ SMbuf *sba_reply_pend ; /* local reply for the sba is pending */
+
+ /*
+ * variables for the ess bandwidth control
+ */
+ long sync_bw ; /* holds the allocaed sync bw */
+ u_long alloc_trans_id ; /* trans id of the last alloc req */
+} ;
+#endif
diff --git a/drivers/net/fddi/skfp/h/sba_def.h b/drivers/net/fddi/skfp/h/sba_def.h
new file mode 100644
index 000000000..0459a095d
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/sba_def.h
@@ -0,0 +1,76 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#define PHYS 0 /* physical addr */
+#define PERM_ADDR 0x80 /* permanet address */
+#define SB_STATIC 0x00000001
+#define MAX_PAYLOAD 1562
+#define PRIMARY_RING 0x00000001
+#ifndef NULL
+#define NULL 0x00
+#endif
+
+/*********************** SB_Input Variable Values ***********************/
+/* may be needed when ever the SBA state machine is called */
+
+#define UNKNOWN_SYNC_SOURCE 0x0001
+#define REQ_ALLOCATION 0x0002
+#define REPORT_RESP 0x0003
+#define CHANGE_RESP 0x0004
+#define TNEG 0x0005
+#define NIF 0x0006
+#define SB_STOP 0x0007
+#define SB_START 0x0008
+#define REPORT_TIMER 0x0009
+#define CHANGE_REQUIRED 0x000A
+
+#define DEFAULT_OV 50
+
+#ifdef SBA
+/**************************** SBA STATES *****************************/
+
+#define SBA_STANDBY 0x00000000
+#define SBA_ACTIVE 0x00000001
+#define SBA_RECOVERY 0x00000002
+#define SBA_REPORT 0x00000003
+#define SBA_CHANGE 0x00000004
+
+/**************************** OTHERS *********************************/
+
+#define FIFTY_PERCENT 50 /* bytes per second */
+#define MAX_SESSIONS 150
+#define TWO_MINUTES 13079 /* 9.175 ms/tick */
+#define FIFTY_BYTES 50
+#define SBA_DENIED 0x0000000D
+#define I_NEED_ONE 0x00000000
+#define MAX_NODES 50
+/*#define T_REPORT 0x59682F00L*/ /* 120s/80ns in Hex */
+#define TWO_MIN 120 /* seconds */
+#define SBA_ST_UNKNOWN 0x00000002
+#define SBA_ST_ACTIVE 0x00000001
+#define S_CLEAR 0x00000000L
+#define ZERO 0x00000000
+#define FULL 0x00000000 /* old: 0xFFFFFFFFF */
+#define S_SET 0x00000001L
+#define LOW_PRIO 0x02 /* ??????? */
+#define OK 0x01 /* ??????? */
+#define NOT_OK 0x00 /* ??????? */
+
+/****************************************/
+/* deallocate_status[ni][si] values */
+/****************************************/
+#define TX_CHANGE 0X00000001L
+#define PENDING 0x00000002L
+#define NONE 0X00000000L
+#endif
diff --git a/drivers/net/fddi/skfp/h/skfbi.h b/drivers/net/fddi/skfp/h/skfbi.h
new file mode 100644
index 000000000..3de2f0d15
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/skfbi.h
@@ -0,0 +1,1128 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SKFBI_H_
+#define _SKFBI_H_
+
+/*
+ * FDDI-Fx (x := {I(SA), P(CI)})
+ * address calculation & function defines
+ */
+
+/*--------------------------------------------------------------------------*/
+#ifdef PCI
+
+/*
+ * (DV) = only defined for Da Vinci
+ * (ML) = only defined for Monalisa
+ */
+
+/*
+ * Configuration Space header
+ */
+#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */
+#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */
+#define PCI_COMMAND 0x04 /* 16 bit Command */
+#define PCI_STATUS 0x06 /* 16 bit Status */
+#define PCI_REV_ID 0x08 /* 8 bit Revision ID */
+#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */
+#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */
+#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */
+#define PCI_HEADER_T 0x0e /* 8 bit Header Type */
+#define PCI_BIST 0x0f /* 8 bit Built-in selftest */
+#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */
+#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */
+/* Byte 18..2b: Reserved */
+#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */
+#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */
+#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */
+/* Byte 34..33: Reserved */
+#define PCI_CAP_PTR 0x34 /* 8 bit (ML) Capabilities Ptr */
+/* Byte 35..3b: Reserved */
+#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */
+#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */
+#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */
+#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */
+/* Device Dependent Region */
+#define PCI_OUR_REG 0x40 /* 32 bit (DV) Our Register */
+#define PCI_OUR_REG_1 0x40 /* 32 bit (ML) Our Register 1 */
+#define PCI_OUR_REG_2 0x44 /* 32 bit (ML) Our Register 2 */
+/* Power Management Region */
+#define PCI_PM_CAP_ID 0x48 /* 8 bit (ML) Power Management Cap. ID */
+#define PCI_PM_NITEM 0x49 /* 8 bit (ML) Next Item Ptr */
+#define PCI_PM_CAP_REG 0x4a /* 16 bit (ML) Power Management Capabilities */
+#define PCI_PM_CTL_STS 0x4c /* 16 bit (ML) Power Manag. Control/Status */
+/* Byte 0x4e: Reserved */
+#define PCI_PM_DAT_REG 0x4f /* 8 bit (ML) Power Manag. Data Register */
+/* VPD Region */
+#define PCI_VPD_CAP_ID 0x50 /* 8 bit (ML) VPD Cap. ID */
+#define PCI_VPD_NITEM 0x51 /* 8 bit (ML) Next Item Ptr */
+#define PCI_VPD_ADR_REG 0x52 /* 16 bit (ML) VPD Address Register */
+#define PCI_VPD_DAT_REG 0x54 /* 32 bit (ML) VPD Data Register */
+/* Byte 58..ff: Reserved */
+
+/*
+ * I2C Address (PCI Config)
+ *
+ * Note: The temperature and voltage sensors are relocated on a different
+ * I2C bus.
+ */
+#define I2C_ADDR_VPD 0xA0 /* I2C address for the VPD EEPROM */
+
+/*
+ * Define Bits and Values of the registers
+ */
+/* PCI_VENDOR_ID 16 bit Vendor ID */
+/* PCI_DEVICE_ID 16 bit Device ID */
+/* Values for Vendor ID and Device ID shall be patched into the code */
+/* PCI_COMMAND 16 bit Command */
+#define PCI_FBTEN 0x0200 /* Bit 9: Fast Back-To-Back enable */
+#define PCI_SERREN 0x0100 /* Bit 8: SERR enable */
+#define PCI_ADSTEP 0x0080 /* Bit 7: Address Stepping */
+#define PCI_PERREN 0x0040 /* Bit 6: Parity Report Response enable */
+#define PCI_VGA_SNOOP 0x0020 /* Bit 5: VGA palette snoop */
+#define PCI_MWIEN 0x0010 /* Bit 4: Memory write an inv cycl ena */
+#define PCI_SCYCEN 0x0008 /* Bit 3: Special Cycle enable */
+#define PCI_BMEN 0x0004 /* Bit 2: Bus Master enable */
+#define PCI_MEMEN 0x0002 /* Bit 1: Memory Space Access enable */
+#define PCI_IOEN 0x0001 /* Bit 0: IO Space Access enable */
+
+/* PCI_STATUS 16 bit Status */
+#define PCI_PERR 0x8000 /* Bit 15: Parity Error */
+#define PCI_SERR 0x4000 /* Bit 14: Signaled SERR */
+#define PCI_RMABORT 0x2000 /* Bit 13: Received Master Abort */
+#define PCI_RTABORT 0x1000 /* Bit 12: Received Target Abort */
+#define PCI_STABORT 0x0800 /* Bit 11: Sent Target Abort */
+#define PCI_DEVSEL 0x0600 /* Bit 10..9: DEVSEL Timing */
+#define PCI_DEV_FAST (0<<9) /* fast */
+#define PCI_DEV_MEDIUM (1<<9) /* medium */
+#define PCI_DEV_SLOW (2<<9) /* slow */
+#define PCI_DATAPERR 0x0100 /* Bit 8: DATA Parity error detected */
+#define PCI_FB2BCAP 0x0080 /* Bit 7: Fast Back-to-Back Capability */
+#define PCI_UDF 0x0040 /* Bit 6: User Defined Features */
+#define PCI_66MHZCAP 0x0020 /* Bit 5: 66 MHz PCI bus clock capable */
+#define PCI_NEWCAP 0x0010 /* Bit 4: New cap. list implemented */
+
+#define PCI_ERRBITS (PCI_PERR|PCI_SERR|PCI_RMABORT|PCI_STABORT|PCI_DATAPERR)
+
+/* PCI_REV_ID 8 bit Revision ID */
+/* PCI_CLASS_CODE 24 bit Class Code */
+/* Byte 2: Base Class (02) */
+/* Byte 1: SubClass (02) */
+/* Byte 0: Programming Interface (00) */
+
+/* PCI_CACHE_LSZ 8 bit Cache Line Size */
+/* Possible values: 0,2,4,8,16 */
+
+/* PCI_LAT_TIM 8 bit Latency Timer */
+
+/* PCI_HEADER_T 8 bit Header Type */
+#define PCI_HD_MF_DEV 0x80 /* Bit 7: 0= single, 1= multi-func dev */
+#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */
+
+/* PCI_BIST 8 bit Built-in selftest */
+#define PCI_BIST_CAP 0x80 /* Bit 7: BIST Capable */
+#define PCI_BIST_ST 0x40 /* Bit 6: Start BIST */
+#define PCI_BIST_RET 0x0f /* Bit 3..0: Completion Code */
+
+/* PCI_BASE_1ST 32 bit 1st Base address */
+#define PCI_MEMSIZE 0x800L /* use 2 kB Memory Base */
+#define PCI_MEMBASE_BITS 0xfffff800L /* Bit 31..11: Memory Base Address */
+#define PCI_MEMSIZE_BIIS 0x000007f0L /* Bit 10..4: Memory Size Req. */
+#define PCI_PREFEN 0x00000008L /* Bit 3: Prefetchable */
+#define PCI_MEM_TYP 0x00000006L /* Bit 2..1: Memory Type */
+#define PCI_MEM32BIT (0<<1) /* Base addr anywhere in 32 Bit range */
+#define PCI_MEM1M (1<<1) /* Base addr below 1 MegaByte */
+#define PCI_MEM64BIT (2<<1) /* Base addr anywhere in 64 Bit range */
+#define PCI_MEMSPACE 0x00000001L /* Bit 0: Memory Space Indic. */
+
+/* PCI_SUB_VID 16 bit Subsystem Vendor ID */
+/* PCI_SUB_ID 16 bit Subsystem ID */
+
+/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */
+#define PCI_ROMBASE 0xfffe0000L /* Bit 31..17: ROM BASE address (1st) */
+#define PCI_ROMBASZ 0x0001c000L /* Bit 16..14: Treat as BASE or SIZE */
+#define PCI_ROMSIZE 0x00003800L /* Bit 13..11: ROM Size Requirements */
+#define PCI_ROMEN 0x00000001L /* Bit 0: Address Decode enable */
+
+/* PCI_CAP_PTR 8 bit New Capabilities Pointers */
+/* PCI_IRQ_LINE 8 bit Interrupt Line */
+/* PCI_IRQ_PIN 8 bit Interrupt Pin */
+/* PCI_MIN_GNT 8 bit Min_Gnt */
+/* PCI_MAX_LAT 8 bit Max_Lat */
+/* Device Dependent Region */
+/* PCI_OUR_REG (DV) 32 bit Our Register */
+/* PCI_OUR_REG_1 (ML) 32 bit Our Register 1 */
+ /* Bit 31..29: reserved */
+#define PCI_PATCH_DIR (3L<<27) /*(DV) Bit 28..27: Ext Patchs direction */
+#define PCI_PATCH_DIR_0 (1L<<27) /*(DV) Type of the pins EXT_PATCHS<1..0> */
+#define PCI_PATCH_DIR_1 (1L<<28) /* 0 = input */
+ /* 1 = output */
+#define PCI_EXT_PATCHS (3L<<25) /*(DV) Bit 26..25: Extended Patches */
+#define PCI_EXT_PATCH_0 (1L<<25) /*(DV) */
+#define PCI_EXT_PATCH_1 (1L<<26) /* CLK for MicroWire (ML) */
+#define PCI_VIO (1L<<25) /*(ML) */
+#define PCI_EN_BOOT (1L<<24) /* Bit 24: Enable BOOT via ROM */
+ /* 1 = Don't boot with ROM */
+ /* 0 = Boot with ROM */
+#define PCI_EN_IO (1L<<23) /* Bit 23: Mapping to IO space */
+#define PCI_EN_FPROM (1L<<22) /* Bit 22: FLASH mapped to mem? */
+ /* 1 = Map Flash to Memory */
+ /* 0 = Disable all addr. decoding */
+#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */
+#define PCI_PAGE_16 (0L<<20) /* 16 k pages */
+#define PCI_PAGE_32K (1L<<20) /* 32 k pages */
+#define PCI_PAGE_64K (2L<<20) /* 64 k pages */
+#define PCI_PAGE_128K (3L<<20) /* 128 k pages */
+ /* Bit 19: reserved (ML) and (DV) */
+#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */
+ /* Bit 15: reserved */
+#define PCI_FORCE_BE (1L<<14) /* Bit 14: Assert all BEs on MR */
+#define PCI_DIS_MRL (1L<<13) /* Bit 13: Disable Mem R Line */
+#define PCI_DIS_MRM (1L<<12) /* Bit 12: Disable Mem R multip */
+#define PCI_DIS_MWI (1L<<11) /* Bit 11: Disable Mem W & inv */
+#define PCI_DISC_CLS (1L<<10) /* Bit 10: Disc: cacheLsz bound */
+#define PCI_BURST_DIS (1L<<9) /* Bit 9: Burst Disable */
+#define PCI_BYTE_SWAP (1L<<8) /*(DV) Bit 8: Byte Swap in DATA */
+#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7..4: Skew Ctrl, DAS Ext */
+#define PCI_SKEW_BASE (0xfL<<0) /* Bit 3..0: Skew Ctrl, Base */
+
+/* PCI_OUR_REG_2 (ML) 32 bit Our Register 2 (Monalisa only) */
+#define PCI_VPD_WR_TH (0xffL<<24) /* Bit 24..31 VPD Write Threshold */
+#define PCI_DEV_SEL (0x7fL<<17) /* Bit 17..23 EEPROM Device Select */
+#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 14..16 VPD ROM Size */
+ /* Bit 12..13 reserved */
+#define PCI_PATCH_DIR2 (0xfL<<8) /* Bit 8..11 Ext Patchs dir 2..5 */
+#define PCI_PATCH_DIR_2 (1L<<8) /* Bit 8 CS for MicroWire */
+#define PCI_PATCH_DIR_3 (1L<<9)
+#define PCI_PATCH_DIR_4 (1L<<10)
+#define PCI_PATCH_DIR_5 (1L<<11)
+#define PCI_EXT_PATCHS2 (0xfL<<4) /* Bit 4..7 Extended Patches */
+#define PCI_EXT_PATCH_2 (1L<<4) /* Bit 4 CS for MicroWire */
+#define PCI_EXT_PATCH_3 (1L<<5)
+#define PCI_EXT_PATCH_4 (1L<<6)
+#define PCI_EXT_PATCH_5 (1L<<7)
+#define PCI_EN_DUMMY_RD (1L<<3) /* Bit 3 Enable Dummy Read */
+#define PCI_REV_DESC (1L<<2) /* Bit 2 Reverse Desc. Bytes */
+#define PCI_USEADDR64 (1L<<1) /* Bit 1 Use 64 Bit Addresse */
+#define PCI_USEDATA64 (1L<<0) /* Bit 0 Use 64 Bit Data bus ext*/
+
+/* Power Management Region */
+/* PCI_PM_CAP_ID 8 bit (ML) Power Management Cap. ID */
+/* PCI_PM_NITEM 8 bit (ML) Next Item Ptr */
+/* PCI_PM_CAP_REG 16 bit (ML) Power Management Capabilities*/
+#define PCI_PME_SUP (0x1f<<11) /* Bit 11..15 PM Manag. Event Support*/
+#define PCI_PM_D2_SUB (1<<10) /* Bit 10 D2 Support Bit */
+#define PCI_PM_D1_SUB (1<<9) /* Bit 9 D1 Support Bit */
+ /* Bit 6..8 reserved */
+#define PCI_PM_DSI (1<<5) /* Bit 5 Device Specific Init.*/
+#define PCI_PM_APS (1<<4) /* Bit 4 Auxialiary Power Src */
+#define PCI_PME_CLOCK (1<<3) /* Bit 3 PM Event Clock */
+#define PCI_PM_VER (7<<0) /* Bit 0..2 PM PCI Spec. version */
+
+/* PCI_PM_CTL_STS 16 bit (ML) Power Manag. Control/Status */
+#define PCI_PME_STATUS (1<<15) /* Bit 15 PFA doesn't sup. PME#*/
+#define PCI_PM_DAT_SCL (3<<13) /* Bit 13..14 dat reg Scaling factor */
+#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 9..12 PM data selector field */
+ /* Bit 7.. 2 reserved */
+#define PCI_PM_STATE (3<<0) /* Bit 0.. 1 Power Management State */
+#define PCI_PM_STATE_D0 (0<<0) /* D0: Operational (default) */
+#define PCI_PM_STATE_D1 (1<<0) /* D1: not supported */
+#define PCI_PM_STATE_D2 (2<<0) /* D2: not supported */
+#define PCI_PM_STATE_D3 (3<<0) /* D3: HOT, Power Down and Reset */
+
+/* PCI_PM_DAT_REG 8 bit (ML) Power Manag. Data Register */
+/* VPD Region */
+/* PCI_VPD_CAP_ID 8 bit (ML) VPD Cap. ID */
+/* PCI_VPD_NITEM 8 bit (ML) Next Item Ptr */
+/* PCI_VPD_ADR_REG 16 bit (ML) VPD Address Register */
+#define PCI_VPD_FLAG (1<<15) /* Bit 15 starts VPD rd/wd cycle*/
+
+/* PCI_VPD_DAT_REG 32 bit (ML) VPD Data Register */
+
+/*
+ * Control Register File:
+ * Bank 0
+ */
+#define B0_RAP 0x0000 /* 8 bit register address port */
+ /* 0x0001 - 0x0003: reserved */
+#define B0_CTRL 0x0004 /* 8 bit control register */
+#define B0_DAS 0x0005 /* 8 Bit control register (DAS) */
+#define B0_LED 0x0006 /* 8 Bit LED register */
+#define B0_TST_CTRL 0x0007 /* 8 bit test control register */
+#define B0_ISRC 0x0008 /* 32 bit Interrupt source register */
+#define B0_IMSK 0x000c /* 32 bit Interrupt mask register */
+
+/* 0x0010 - 0x006b: formac+ (supernet_3) fequently used registers */
+#define B0_CMDREG1 0x0010 /* write command reg 1 instruction */
+#define B0_CMDREG2 0x0014 /* write command reg 2 instruction */
+#define B0_ST1U 0x0010 /* read upper 16-bit of status reg 1 */
+#define B0_ST1L 0x0014 /* read lower 16-bit of status reg 1 */
+#define B0_ST2U 0x0018 /* read upper 16-bit of status reg 2 */
+#define B0_ST2L 0x001c /* read lower 16-bit of status reg 2 */
+
+#define B0_MARR 0x0020 /* r/w the memory read addr register */
+#define B0_MARW 0x0024 /* r/w the memory write addr register*/
+#define B0_MDRU 0x0028 /* r/w upper 16-bit of mem. data reg */
+#define B0_MDRL 0x002c /* r/w lower 16-bit of mem. data reg */
+
+#define B0_MDREG3 0x0030 /* r/w Mode Register 3 */
+#define B0_ST3U 0x0034 /* read upper 16-bit of status reg 3 */
+#define B0_ST3L 0x0038 /* read lower 16-bit of status reg 3 */
+#define B0_IMSK3U 0x003c /* r/w upper 16-bit of IMSK reg 3 */
+#define B0_IMSK3L 0x0040 /* r/w lower 16-bit of IMSK reg 3 */
+#define B0_IVR 0x0044 /* read Interrupt Vector register */
+#define B0_IMR 0x0048 /* r/w Interrupt mask register */
+/* 0x4c Hidden */
+
+#define B0_CNTRL_A 0x0050 /* control register A (r/w) */
+#define B0_CNTRL_B 0x0054 /* control register B (r/w) */
+#define B0_INTR_MASK 0x0058 /* interrupt mask (r/w) */
+#define B0_XMIT_VECTOR 0x005c /* transmit vector register (r/w) */
+
+#define B0_STATUS_A 0x0060 /* status register A (read only) */
+#define B0_STATUS_B 0x0064 /* status register B (read only) */
+#define B0_CNTRL_C 0x0068 /* control register C (r/w) */
+#define B0_MDREG1 0x006c /* r/w Mode Register 1 */
+
+#define B0_R1_CSR 0x0070 /* 32 bit BMU control/status reg (rec q 1) */
+#define B0_R2_CSR 0x0074 /* 32 bit BMU control/status reg (rec q 2)(DV)*/
+#define B0_XA_CSR 0x0078 /* 32 bit BMU control/status reg (a xmit q) */
+#define B0_XS_CSR 0x007c /* 32 bit BMU control/status reg (s xmit q) */
+
+/*
+ * Bank 1
+ * - completely empty (this is the RAP Block window)
+ * Note: if RAP = 1 this page is reserved
+ */
+
+/*
+ * Bank 2
+ */
+#define B2_MAC_0 0x0100 /* 8 bit MAC address Byte 0 */
+#define B2_MAC_1 0x0101 /* 8 bit MAC address Byte 1 */
+#define B2_MAC_2 0x0102 /* 8 bit MAC address Byte 2 */
+#define B2_MAC_3 0x0103 /* 8 bit MAC address Byte 3 */
+#define B2_MAC_4 0x0104 /* 8 bit MAC address Byte 4 */
+#define B2_MAC_5 0x0105 /* 8 bit MAC address Byte 5 */
+#define B2_MAC_6 0x0106 /* 8 bit MAC address Byte 6 (== 0) (DV) */
+#define B2_MAC_7 0x0107 /* 8 bit MAC address Byte 7 (== 0) (DV) */
+
+#define B2_CONN_TYP 0x0108 /* 8 bit Connector type */
+#define B2_PMD_TYP 0x0109 /* 8 bit PMD type */
+ /* 0x010a - 0x010b: reserved */
+ /* Eprom registers are currently of no use */
+#define B2_E_0 0x010c /* 8 bit EPROM Byte 0 */
+#define B2_E_1 0x010d /* 8 bit EPROM Byte 1 */
+#define B2_E_2 0x010e /* 8 bit EPROM Byte 2 */
+#define B2_E_3 0x010f /* 8 bit EPROM Byte 3 */
+#define B2_FAR 0x0110 /* 32 bit Flash-Prom Address Register/Counter */
+#define B2_FDP 0x0114 /* 8 bit Flash-Prom Data Port */
+ /* 0x0115 - 0x0117: reserved */
+#define B2_LD_CRTL 0x0118 /* 8 bit loader control */
+#define B2_LD_TEST 0x0119 /* 8 bit loader test */
+ /* 0x011a - 0x011f: reserved */
+#define B2_TI_INI 0x0120 /* 32 bit Timer init value */
+#define B2_TI_VAL 0x0124 /* 32 bit Timer value */
+#define B2_TI_CRTL 0x0128 /* 8 bit Timer control */
+#define B2_TI_TEST 0x0129 /* 8 Bit Timer Test */
+ /* 0x012a - 0x012f: reserved */
+#define B2_WDOG_INI 0x0130 /* 32 bit Watchdog init value */
+#define B2_WDOG_VAL 0x0134 /* 32 bit Watchdog value */
+#define B2_WDOG_CRTL 0x0138 /* 8 bit Watchdog control */
+#define B2_WDOG_TEST 0x0139 /* 8 Bit Watchdog Test */
+ /* 0x013a - 0x013f: reserved */
+#define B2_RTM_INI 0x0140 /* 32 bit RTM init value */
+#define B2_RTM_VAL 0x0144 /* 32 bit RTM value */
+#define B2_RTM_CRTL 0x0148 /* 8 bit RTM control */
+#define B2_RTM_TEST 0x0149 /* 8 Bit RTM Test */
+
+#define B2_TOK_COUNT 0x014c /* (ML) 32 bit Token Counter */
+#define B2_DESC_ADDR_H 0x0150 /* (ML) 32 bit Desciptor Base Addr Reg High */
+#define B2_CTRL_2 0x0154 /* (ML) 8 bit Control Register 2 */
+#define B2_IFACE_REG 0x0155 /* (ML) 8 bit Interface Register */
+ /* 0x0156: reserved */
+#define B2_TST_CTRL_2 0x0157 /* (ML) 8 bit Test Control Register 2 */
+#define B2_I2C_CTRL 0x0158 /* (ML) 32 bit I2C Control Register */
+#define B2_I2C_DATA 0x015c /* (ML) 32 bit I2C Data Register */
+
+#define B2_IRQ_MOD_INI 0x0160 /* (ML) 32 bit IRQ Moderation Timer Init Reg. */
+#define B2_IRQ_MOD_VAL 0x0164 /* (ML) 32 bit IRQ Moderation Timer Value */
+#define B2_IRQ_MOD_CTRL 0x0168 /* (ML) 8 bit IRQ Moderation Timer Control */
+#define B2_IRQ_MOD_TEST 0x0169 /* (ML) 8 bit IRQ Moderation Timer Test */
+ /* 0x016a - 0x017f: reserved */
+
+/*
+ * Bank 3
+ */
+/*
+ * This is a copy of the Configuration register file (lower half)
+ */
+#define B3_CFG_SPC 0x180
+
+/*
+ * Bank 4
+ */
+#define B4_R1_D 0x0200 /* 4*32 bit current receive Descriptor */
+#define B4_R1_DA 0x0210 /* 32 bit current rec desc address */
+#define B4_R1_AC 0x0214 /* 32 bit current receive Address Count */
+#define B4_R1_BC 0x0218 /* 32 bit current receive Byte Counter */
+#define B4_R1_CSR 0x021c /* 32 bit BMU Control/Status Register */
+#define B4_R1_F 0x0220 /* 32 bit flag register */
+#define B4_R1_T1 0x0224 /* 32 bit Test Register 1 */
+#define B4_R1_T1_TR 0x0224 /* 8 bit Test Register 1 TR */
+#define B4_R1_T1_WR 0x0225 /* 8 bit Test Register 1 WR */
+#define B4_R1_T1_RD 0x0226 /* 8 bit Test Register 1 RD */
+#define B4_R1_T1_SV 0x0227 /* 8 bit Test Register 1 SV */
+#define B4_R1_T2 0x0228 /* 32 bit Test Register 2 */
+#define B4_R1_T3 0x022c /* 32 bit Test Register 3 */
+#define B4_R1_DA_H 0x0230 /* (ML) 32 bit Curr Rx Desc Address High */
+#define B4_R1_AC_H 0x0234 /* (ML) 32 bit Curr Addr Counter High dword */
+ /* 0x0238 - 0x023f: reserved */
+ /* Receive queue 2 is removed on Monalisa */
+#define B4_R2_D 0x0240 /* 4*32 bit current receive Descriptor (q2) */
+#define B4_R2_DA 0x0250 /* 32 bit current rec desc address (q2) */
+#define B4_R2_AC 0x0254 /* 32 bit current receive Address Count (q2) */
+#define B4_R2_BC 0x0258 /* 32 bit current receive Byte Counter (q2) */
+#define B4_R2_CSR 0x025c /* 32 bit BMU Control/Status Register (q2) */
+#define B4_R2_F 0x0260 /* 32 bit flag register (q2) */
+#define B4_R2_T1 0x0264 /* 32 bit Test Register 1 (q2) */
+#define B4_R2_T1_TR 0x0264 /* 8 bit Test Register 1 TR (q2) */
+#define B4_R2_T1_WR 0x0265 /* 8 bit Test Register 1 WR (q2) */
+#define B4_R2_T1_RD 0x0266 /* 8 bit Test Register 1 RD (q2) */
+#define B4_R2_T1_SV 0x0267 /* 8 bit Test Register 1 SV (q2) */
+#define B4_R2_T2 0x0268 /* 32 bit Test Register 2 (q2) */
+#define B4_R2_T3 0x026c /* 32 bit Test Register 3 (q2) */
+ /* 0x0270 - 0x027c: reserved */
+
+/*
+ * Bank 5
+ */
+#define B5_XA_D 0x0280 /* 4*32 bit current transmit Descriptor (xa) */
+#define B5_XA_DA 0x0290 /* 32 bit current tx desc address (xa) */
+#define B5_XA_AC 0x0294 /* 32 bit current tx Address Count (xa) */
+#define B5_XA_BC 0x0298 /* 32 bit current tx Byte Counter (xa) */
+#define B5_XA_CSR 0x029c /* 32 bit BMU Control/Status Register (xa) */
+#define B5_XA_F 0x02a0 /* 32 bit flag register (xa) */
+#define B5_XA_T1 0x02a4 /* 32 bit Test Register 1 (xa) */
+#define B5_XA_T1_TR 0x02a4 /* 8 bit Test Register 1 TR (xa) */
+#define B5_XA_T1_WR 0x02a5 /* 8 bit Test Register 1 WR (xa) */
+#define B5_XA_T1_RD 0x02a6 /* 8 bit Test Register 1 RD (xa) */
+#define B5_XA_T1_SV 0x02a7 /* 8 bit Test Register 1 SV (xa) */
+#define B5_XA_T2 0x02a8 /* 32 bit Test Register 2 (xa) */
+#define B5_XA_T3 0x02ac /* 32 bit Test Register 3 (xa) */
+#define B5_XA_DA_H 0x02b0 /* (ML) 32 bit Curr Tx Desc Address High */
+#define B5_XA_AC_H 0x02b4 /* (ML) 32 bit Curr Addr Counter High dword */
+ /* 0x02b8 - 0x02bc: reserved */
+#define B5_XS_D 0x02c0 /* 4*32 bit current transmit Descriptor (xs) */
+#define B5_XS_DA 0x02d0 /* 32 bit current tx desc address (xs) */
+#define B5_XS_AC 0x02d4 /* 32 bit current transmit Address Count(xs) */
+#define B5_XS_BC 0x02d8 /* 32 bit current transmit Byte Counter (xs) */
+#define B5_XS_CSR 0x02dc /* 32 bit BMU Control/Status Register (xs) */
+#define B5_XS_F 0x02e0 /* 32 bit flag register (xs) */
+#define B5_XS_T1 0x02e4 /* 32 bit Test Register 1 (xs) */
+#define B5_XS_T1_TR 0x02e4 /* 8 bit Test Register 1 TR (xs) */
+#define B5_XS_T1_WR 0x02e5 /* 8 bit Test Register 1 WR (xs) */
+#define B5_XS_T1_RD 0x02e6 /* 8 bit Test Register 1 RD (xs) */
+#define B5_XS_T1_SV 0x02e7 /* 8 bit Test Register 1 SV (xs) */
+#define B5_XS_T2 0x02e8 /* 32 bit Test Register 2 (xs) */
+#define B5_XS_T3 0x02ec /* 32 bit Test Register 3 (xs) */
+#define B5_XS_DA_H 0x02f0 /* (ML) 32 bit Curr Tx Desc Address High */
+#define B5_XS_AC_H 0x02f4 /* (ML) 32 bit Curr Addr Counter High dword */
+ /* 0x02f8 - 0x02fc: reserved */
+
+/*
+ * Bank 6
+ */
+/* External PLC-S registers (SN2 compatibility for DV) */
+/* External registers (ML) */
+#define B6_EXT_REG 0x300
+
+/*
+ * Bank 7
+ */
+/* DAS PLC-S Registers */
+
+/*
+ * Bank 8 - 15
+ */
+/* IFCP registers */
+
+/*---------------------------------------------------------------------------*/
+/* Definitions of the Bits in the registers */
+
+/* B0_RAP 16 bit register address port */
+#define RAP_RAP 0x0f /* Bit 3..0: 0 = block0, .., f = block15 */
+
+/* B0_CTRL 8 bit control register */
+#define CTRL_FDDI_CLR (1<<7) /* Bit 7: (ML) Clear FDDI Reset */
+#define CTRL_FDDI_SET (1<<6) /* Bit 6: (ML) Set FDDI Reset */
+#define CTRL_HPI_CLR (1<<5) /* Bit 5: Clear HPI SM reset */
+#define CTRL_HPI_SET (1<<4) /* Bit 4: Set HPI SM reset */
+#define CTRL_MRST_CLR (1<<3) /* Bit 3: Clear Master reset */
+#define CTRL_MRST_SET (1<<2) /* Bit 2: Set Master reset */
+#define CTRL_RST_CLR (1<<1) /* Bit 1: Clear Software reset */
+#define CTRL_RST_SET (1<<0) /* Bit 0: Set Software reset */
+
+/* B0_DAS 8 Bit control register (DAS) */
+#define BUS_CLOCK (1<<7) /* Bit 7: (ML) Bus Clock 0/1 = 33/66MHz */
+#define BUS_SLOT_SZ (1<<6) /* Bit 6: (ML) Slot Size 0/1 = 32/64 bit slot*/
+ /* Bit 5..4: reserved */
+#define DAS_AVAIL (1<<3) /* Bit 3: 1 = DAS, 0 = SAS */
+#define DAS_BYP_ST (1<<2) /* Bit 2: 1 = avail,SAS, 0 = not avail */
+#define DAS_BYP_INS (1<<1) /* Bit 1: 1 = insert Bypass */
+#define DAS_BYP_RMV (1<<0) /* Bit 0: 1 = remove Bypass */
+
+/* B0_LED 8 Bit LED register */
+ /* Bit 7..6: reserved */
+#define LED_2_ON (1<<5) /* Bit 5: 1 = switch LED_2 on (left,gn)*/
+#define LED_2_OFF (1<<4) /* Bit 4: 1 = switch LED_2 off */
+#define LED_1_ON (1<<3) /* Bit 3: 1 = switch LED_1 on (mid,yel)*/
+#define LED_1_OFF (1<<2) /* Bit 2: 1 = switch LED_1 off */
+#define LED_0_ON (1<<1) /* Bit 1: 1 = switch LED_0 on (rght,gn)*/
+#define LED_0_OFF (1<<0) /* Bit 0: 1 = switch LED_0 off */
+/* This hardware defines are very ugly therefore we define some others */
+
+#define LED_GA_ON LED_2_ON /* S port = A port */
+#define LED_GA_OFF LED_2_OFF /* S port = A port */
+#define LED_MY_ON LED_1_ON
+#define LED_MY_OFF LED_1_OFF
+#define LED_GB_ON LED_0_ON
+#define LED_GB_OFF LED_0_OFF
+
+/* B0_TST_CTRL 8 bit test control register */
+#define TST_FRC_DPERR_MR (1<<7) /* Bit 7: force DATAPERR on MST RE. */
+#define TST_FRC_DPERR_MW (1<<6) /* Bit 6: force DATAPERR on MST WR. */
+#define TST_FRC_DPERR_TR (1<<5) /* Bit 5: force DATAPERR on TRG RE. */
+#define TST_FRC_DPERR_TW (1<<4) /* Bit 4: force DATAPERR on TRG WR. */
+#define TST_FRC_APERR_M (1<<3) /* Bit 3: force ADDRPERR on MST */
+#define TST_FRC_APERR_T (1<<2) /* Bit 2: force ADDRPERR on TRG */
+#define TST_CFG_WRITE_ON (1<<1) /* Bit 1: ena configuration reg. WR */
+#define TST_CFG_WRITE_OFF (1<<0) /* Bit 0: dis configuration reg. WR */
+
+/* B0_ISRC 32 bit Interrupt source register */
+ /* Bit 31..28: reserved */
+#define IS_I2C_READY (1L<<27) /* Bit 27: (ML) IRQ on end of I2C tx */
+#define IS_IRQ_SW (1L<<26) /* Bit 26: (ML) SW forced IRQ */
+#define IS_EXT_REG (1L<<25) /* Bit 25: (ML) IRQ from external reg*/
+#define IS_IRQ_STAT (1L<<24) /* Bit 24: IRQ status exception */
+ /* PERR, RMABORT, RTABORT DATAPERR */
+#define IS_IRQ_MST_ERR (1L<<23) /* Bit 23: IRQ master error */
+ /* RMABORT, RTABORT, DATAPERR */
+#define IS_TIMINT (1L<<22) /* Bit 22: IRQ_TIMER */
+#define IS_TOKEN (1L<<21) /* Bit 21: IRQ_RTM */
+/*
+ * Note: The DAS is our First Port (!=PA)
+ */
+#define IS_PLINT1 (1L<<20) /* Bit 20: IRQ_PHY_DAS */
+#define IS_PLINT2 (1L<<19) /* Bit 19: IRQ_IFCP_4 */
+#define IS_MINTR3 (1L<<18) /* Bit 18: IRQ_IFCP_3/IRQ_PHY */
+#define IS_MINTR2 (1L<<17) /* Bit 17: IRQ_IFCP_2/IRQ_MAC_2 */
+#define IS_MINTR1 (1L<<16) /* Bit 16: IRQ_IFCP_1/IRQ_MAC_1 */
+/* Receive Queue 1 */
+#define IS_R1_P (1L<<15) /* Bit 15: Parity Error (q1) */
+#define IS_R1_B (1L<<14) /* Bit 14: End of Buffer (q1) */
+#define IS_R1_F (1L<<13) /* Bit 13: End of Frame (q1) */
+#define IS_R1_C (1L<<12) /* Bit 12: Encoding Error (q1) */
+/* Receive Queue 2 */
+#define IS_R2_P (1L<<11) /* Bit 11: (DV) Parity Error (q2) */
+#define IS_R2_B (1L<<10) /* Bit 10: (DV) End of Buffer (q2) */
+#define IS_R2_F (1L<<9) /* Bit 9: (DV) End of Frame (q2) */
+#define IS_R2_C (1L<<8) /* Bit 8: (DV) Encoding Error (q2) */
+/* Asynchronous Transmit queue */
+ /* Bit 7: reserved */
+#define IS_XA_B (1L<<6) /* Bit 6: End of Buffer (xa) */
+#define IS_XA_F (1L<<5) /* Bit 5: End of Frame (xa) */
+#define IS_XA_C (1L<<4) /* Bit 4: Encoding Error (xa) */
+/* Synchronous Transmit queue */
+ /* Bit 3: reserved */
+#define IS_XS_B (1L<<2) /* Bit 2: End of Buffer (xs) */
+#define IS_XS_F (1L<<1) /* Bit 1: End of Frame (xs) */
+#define IS_XS_C (1L<<0) /* Bit 0: Encoding Error (xs) */
+
+/*
+ * Define all valid interrupt source Bits from GET_ISR ()
+ */
+#define ALL_IRSR 0x01ffff77L /* (DV) */
+#define ALL_IRSR_ML 0x0ffff077L /* (ML) */
+
+
+/* B0_IMSK 32 bit Interrupt mask register */
+/*
+ * The Bit definnition of this register are the same as of the interrupt
+ * source register. These definition are directly derived from the Hardware
+ * spec.
+ */
+ /* Bit 31..28: reserved */
+#define IRQ_I2C_READY (1L<<27) /* Bit 27: (ML) IRQ on end of I2C tx */
+#define IRQ_SW (1L<<26) /* Bit 26: (ML) SW forced IRQ */
+#define IRQ_EXT_REG (1L<<25) /* Bit 25: (ML) IRQ from external reg*/
+#define IRQ_STAT (1L<<24) /* Bit 24: IRQ status exception */
+ /* PERR, RMABORT, RTABORT DATAPERR */
+#define IRQ_MST_ERR (1L<<23) /* Bit 23: IRQ master error */
+ /* RMABORT, RTABORT, DATAPERR */
+#define IRQ_TIMER (1L<<22) /* Bit 22: IRQ_TIMER */
+#define IRQ_RTM (1L<<21) /* Bit 21: IRQ_RTM */
+#define IRQ_DAS (1L<<20) /* Bit 20: IRQ_PHY_DAS */
+#define IRQ_IFCP_4 (1L<<19) /* Bit 19: IRQ_IFCP_4 */
+#define IRQ_IFCP_3 (1L<<18) /* Bit 18: IRQ_IFCP_3/IRQ_PHY */
+#define IRQ_IFCP_2 (1L<<17) /* Bit 17: IRQ_IFCP_2/IRQ_MAC_2 */
+#define IRQ_IFCP_1 (1L<<16) /* Bit 16: IRQ_IFCP_1/IRQ_MAC_1 */
+/* Receive Queue 1 */
+#define IRQ_R1_P (1L<<15) /* Bit 15: Parity Error (q1) */
+#define IRQ_R1_B (1L<<14) /* Bit 14: End of Buffer (q1) */
+#define IRQ_R1_F (1L<<13) /* Bit 13: End of Frame (q1) */
+#define IRQ_R1_C (1L<<12) /* Bit 12: Encoding Error (q1) */
+/* Receive Queue 2 */
+#define IRQ_R2_P (1L<<11) /* Bit 11: (DV) Parity Error (q2) */
+#define IRQ_R2_B (1L<<10) /* Bit 10: (DV) End of Buffer (q2) */
+#define IRQ_R2_F (1L<<9) /* Bit 9: (DV) End of Frame (q2) */
+#define IRQ_R2_C (1L<<8) /* Bit 8: (DV) Encoding Error (q2) */
+/* Asynchronous Transmit queue */
+ /* Bit 7: reserved */
+#define IRQ_XA_B (1L<<6) /* Bit 6: End of Buffer (xa) */
+#define IRQ_XA_F (1L<<5) /* Bit 5: End of Frame (xa) */
+#define IRQ_XA_C (1L<<4) /* Bit 4: Encoding Error (xa) */
+/* Synchronous Transmit queue */
+ /* Bit 3: reserved */
+#define IRQ_XS_B (1L<<2) /* Bit 2: End of Buffer (xs) */
+#define IRQ_XS_F (1L<<1) /* Bit 1: End of Frame (xs) */
+#define IRQ_XS_C (1L<<0) /* Bit 0: Encoding Error (xs) */
+
+/* 0x0010 - 0x006b: formac+ (supernet_3) fequently used registers */
+/* B0_R1_CSR 32 bit BMU control/status reg (rec q 1 ) */
+/* B0_R2_CSR 32 bit BMU control/status reg (rec q 2 ) */
+/* B0_XA_CSR 32 bit BMU control/status reg (a xmit q ) */
+/* B0_XS_CSR 32 bit BMU control/status reg (s xmit q ) */
+/* The registers are the same as B4_R1_CSR, B4_R2_CSR, B5_Xa_CSR, B5_XS_CSR */
+
+/* B2_MAC_0 8 bit MAC address Byte 0 */
+/* B2_MAC_1 8 bit MAC address Byte 1 */
+/* B2_MAC_2 8 bit MAC address Byte 2 */
+/* B2_MAC_3 8 bit MAC address Byte 3 */
+/* B2_MAC_4 8 bit MAC address Byte 4 */
+/* B2_MAC_5 8 bit MAC address Byte 5 */
+/* B2_MAC_6 8 bit MAC address Byte 6 (== 0) (DV) */
+/* B2_MAC_7 8 bit MAC address Byte 7 (== 0) (DV) */
+
+/* B2_CONN_TYP 8 bit Connector type */
+/* B2_PMD_TYP 8 bit PMD type */
+/* Values of connector and PMD type comply to SysKonnect internal std */
+
+/* The EPROM register are currently of no use */
+/* B2_E_0 8 bit EPROM Byte 0 */
+/* B2_E_1 8 bit EPROM Byte 1 */
+/* B2_E_2 8 bit EPROM Byte 2 */
+/* B2_E_3 8 bit EPROM Byte 3 */
+
+/* B2_FAR 32 bit Flash-Prom Address Register/Counter */
+#define FAR_ADDR 0x1ffffL /* Bit 16..0: FPROM Address mask */
+
+/* B2_FDP 8 bit Flash-Prom Data Port */
+
+/* B2_LD_CRTL 8 bit loader control */
+/* Bits are currently reserved */
+
+/* B2_LD_TEST 8 bit loader test */
+#define LD_T_ON (1<<3) /* Bit 3: Loader Testmode on */
+#define LD_T_OFF (1<<2) /* Bit 2: Loader Testmode off */
+#define LD_T_STEP (1<<1) /* Bit 1: Decrement FPROM addr. Counter */
+#define LD_START (1<<0) /* Bit 0: Start loading FPROM */
+
+/* B2_TI_INI 32 bit Timer init value */
+/* B2_TI_VAL 32 bit Timer value */
+/* B2_TI_CRTL 8 bit Timer control */
+/* B2_TI_TEST 8 Bit Timer Test */
+/* B2_WDOG_INI 32 bit Watchdog init value */
+/* B2_WDOG_VAL 32 bit Watchdog value */
+/* B2_WDOG_CRTL 8 bit Watchdog control */
+/* B2_WDOG_TEST 8 Bit Watchdog Test */
+/* B2_RTM_INI 32 bit RTM init value */
+/* B2_RTM_VAL 32 bit RTM value */
+/* B2_RTM_CRTL 8 bit RTM control */
+/* B2_RTM_TEST 8 Bit RTM Test */
+/* B2_<TIM>_CRTL 8 bit <TIM> control */
+/* B2_IRQ_MOD_INI 32 bit IRQ Moderation Timer Init Reg. (ML) */
+/* B2_IRQ_MOD_VAL 32 bit IRQ Moderation Timer Value (ML) */
+/* B2_IRQ_MOD_CTRL 8 bit IRQ Moderation Timer Control (ML) */
+/* B2_IRQ_MOD_TEST 8 bit IRQ Moderation Timer Test (ML) */
+#define GET_TOK_CT (1<<4) /* Bit 4: Get the Token Counter (RTM) */
+#define TIM_RES_TOK (1<<3) /* Bit 3: RTM Status: 1 == restricted */
+#define TIM_ALARM (1<<3) /* Bit 3: Timer Alarm (WDOG) */
+#define TIM_START (1<<2) /* Bit 2: Start Timer (TI,WDOG,RTM,IRQ_MOD)*/
+#define TIM_STOP (1<<1) /* Bit 1: Stop Timer (TI,WDOG,RTM,IRQ_MOD) */
+#define TIM_CL_IRQ (1<<0) /* Bit 0: Clear Timer IRQ (TI,WDOG,RTM) */
+/* B2_<TIM>_TEST 8 Bit <TIM> Test */
+#define TIM_T_ON (1<<2) /* Bit 2: Test mode on (TI,WDOG,RTM,IRQ_MOD) */
+#define TIM_T_OFF (1<<1) /* Bit 1: Test mode off (TI,WDOG,RTM,IRQ_MOD) */
+#define TIM_T_STEP (1<<0) /* Bit 0: Test step (TI,WDOG,RTM,IRQ_MOD) */
+
+/* B2_TOK_COUNT 0x014c (ML) 32 bit Token Counter */
+/* B2_DESC_ADDR_H 0x0150 (ML) 32 bit Desciptor Base Addr Reg High */
+/* B2_CTRL_2 0x0154 (ML) 8 bit Control Register 2 */
+ /* Bit 7..5: reserved */
+#define CTRL_CL_I2C_IRQ (1<<4) /* Bit 4: Clear I2C IRQ */
+#define CTRL_ST_SW_IRQ (1<<3) /* Bit 3: Set IRQ SW Request */
+#define CTRL_CL_SW_IRQ (1<<2) /* Bit 2: Clear IRQ SW Request */
+#define CTRL_STOP_DONE (1<<1) /* Bit 1: Stop Master is finished */
+#define CTRL_STOP_MAST (1<<0) /* Bit 0: Command Bit to stop the master*/
+
+/* B2_IFACE_REG 0x0155 (ML) 8 bit Interface Register */
+ /* Bit 7..3: reserved */
+#define IF_I2C_DATA_DIR (1<<2) /* Bit 2: direction of IF_I2C_DATA*/
+#define IF_I2C_DATA (1<<1) /* Bit 1: I2C Data Port */
+#define IF_I2C_CLK (1<<0) /* Bit 0: I2C Clock Port */
+
+ /* 0x0156: reserved */
+/* B2_TST_CTRL_2 0x0157 (ML) 8 bit Test Control Register 2 */
+ /* Bit 7..4: reserved */
+ /* force the following error on */
+ /* the next master read/write */
+#define TST_FRC_DPERR_MR64 (1<<3) /* Bit 3: DataPERR RD 64 */
+#define TST_FRC_DPERR_MW64 (1<<2) /* Bit 2: DataPERR WR 64 */
+#define TST_FRC_APERR_1M64 (1<<1) /* Bit 1: AddrPERR on 1. phase */
+#define TST_FRC_APERR_2M64 (1<<0) /* Bit 0: AddrPERR on 2. phase */
+
+/* B2_I2C_CTRL 0x0158 (ML) 32 bit I2C Control Register */
+#define I2C_FLAG (1L<<31) /* Bit 31: Start read/write if WR */
+#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be read/written*/
+#define I2C_DEV_SEL (0x7fL<<9) /* Bit 9..15: I2C Device Select */
+ /* Bit 5.. 8: reserved */
+#define I2C_BURST_LEN (1L<<4) /* Bit 4 Burst Len, 1/4 bytes */
+#define I2C_DEV_SIZE (7L<<1) /* Bit 1.. 3: I2C Device Size */
+#define I2C_025K_DEV (0L<<1) /* 0: 256 Bytes or smaller*/
+#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */
+#define I2C_1K_DEV (2L<<1) /* 2: 1024 Bytes */
+#define I2C_2K_DEV (3L<<1) /* 3: 2048 Bytes */
+#define I2C_4K_DEV (4L<<1) /* 4: 4096 Bytes */
+#define I2C_8K_DEV (5L<<1) /* 5: 8192 Bytes */
+#define I2C_16K_DEV (6L<<1) /* 6: 16384 Bytes */
+#define I2C_32K_DEV (7L<<1) /* 7: 32768 Bytes */
+#define I2C_STOP_BIT (1<<0) /* Bit 0: Interrupt I2C transfer */
+
+/*
+ * I2C Addresses
+ *
+ * The temperature sensor and the voltage sensor are on the same I2C bus.
+ * Note: The voltage sensor (Micorwire) will be selected by PCI_EXT_PATCH_1
+ * in PCI_OUR_REG 1.
+ */
+#define I2C_ADDR_TEMP 0x90 /* I2C Address Temperature Sensor */
+
+/* B2_I2C_DATA 0x015c (ML) 32 bit I2C Data Register */
+
+/* B4_R1_D 4*32 bit current receive Descriptor (q1) */
+/* B4_R1_DA 32 bit current rec desc address (q1) */
+/* B4_R1_AC 32 bit current receive Address Count (q1) */
+/* B4_R1_BC 32 bit current receive Byte Counter (q1) */
+/* B4_R1_CSR 32 bit BMU Control/Status Register (q1) */
+/* B4_R1_F 32 bit flag register (q1) */
+/* B4_R1_T1 32 bit Test Register 1 (q1) */
+/* B4_R1_T2 32 bit Test Register 2 (q1) */
+/* B4_R1_T3 32 bit Test Register 3 (q1) */
+/* B4_R2_D 4*32 bit current receive Descriptor (q2) */
+/* B4_R2_DA 32 bit current rec desc address (q2) */
+/* B4_R2_AC 32 bit current receive Address Count (q2) */
+/* B4_R2_BC 32 bit current receive Byte Counter (q2) */
+/* B4_R2_CSR 32 bit BMU Control/Status Register (q2) */
+/* B4_R2_F 32 bit flag register (q2) */
+/* B4_R2_T1 32 bit Test Register 1 (q2) */
+/* B4_R2_T2 32 bit Test Register 2 (q2) */
+/* B4_R2_T3 32 bit Test Register 3 (q2) */
+/* B5_XA_D 4*32 bit current receive Descriptor (xa) */
+/* B5_XA_DA 32 bit current rec desc address (xa) */
+/* B5_XA_AC 32 bit current receive Address Count (xa) */
+/* B5_XA_BC 32 bit current receive Byte Counter (xa) */
+/* B5_XA_CSR 32 bit BMU Control/Status Register (xa) */
+/* B5_XA_F 32 bit flag register (xa) */
+/* B5_XA_T1 32 bit Test Register 1 (xa) */
+/* B5_XA_T2 32 bit Test Register 2 (xa) */
+/* B5_XA_T3 32 bit Test Register 3 (xa) */
+/* B5_XS_D 4*32 bit current receive Descriptor (xs) */
+/* B5_XS_DA 32 bit current rec desc address (xs) */
+/* B5_XS_AC 32 bit current receive Address Count (xs) */
+/* B5_XS_BC 32 bit current receive Byte Counter (xs) */
+/* B5_XS_CSR 32 bit BMU Control/Status Register (xs) */
+/* B5_XS_F 32 bit flag register (xs) */
+/* B5_XS_T1 32 bit Test Register 1 (xs) */
+/* B5_XS_T2 32 bit Test Register 2 (xs) */
+/* B5_XS_T3 32 bit Test Register 3 (xs) */
+/* B5_<xx>_CSR 32 bit BMU Control/Status Register (xx) */
+#define CSR_DESC_CLEAR (1L<<21) /* Bit 21: Clear Reset for Descr */
+#define CSR_DESC_SET (1L<<20) /* Bit 20: Set Reset for Descr */
+#define CSR_FIFO_CLEAR (1L<<19) /* Bit 19: Clear Reset for FIFO */
+#define CSR_FIFO_SET (1L<<18) /* Bit 18: Set Reset for FIFO */
+#define CSR_HPI_RUN (1L<<17) /* Bit 17: Release HPI SM */
+#define CSR_HPI_RST (1L<<16) /* Bit 16: Reset HPI SM to Idle */
+#define CSR_SV_RUN (1L<<15) /* Bit 15: Release Supervisor SM */
+#define CSR_SV_RST (1L<<14) /* Bit 14: Reset Supervisor SM */
+#define CSR_DREAD_RUN (1L<<13) /* Bit 13: Release Descr Read SM */
+#define CSR_DREAD_RST (1L<<12) /* Bit 12: Reset Descr Read SM */
+#define CSR_DWRITE_RUN (1L<<11) /* Bit 11: Rel. Descr Write SM */
+#define CSR_DWRITE_RST (1L<<10) /* Bit 10: Reset Descr Write SM */
+#define CSR_TRANS_RUN (1L<<9) /* Bit 9: Release Transfer SM */
+#define CSR_TRANS_RST (1L<<8) /* Bit 8: Reset Transfer SM */
+ /* Bit 7..5: reserved */
+#define CSR_START (1L<<4) /* Bit 4: Start Rec/Xmit Queue */
+#define CSR_IRQ_CL_P (1L<<3) /* Bit 3: Clear Parity IRQ, Rcv */
+#define CSR_IRQ_CL_B (1L<<2) /* Bit 2: Clear EOB IRQ */
+#define CSR_IRQ_CL_F (1L<<1) /* Bit 1: Clear EOF IRQ */
+#define CSR_IRQ_CL_C (1L<<0) /* Bit 0: Clear ERR IRQ */
+
+#define CSR_SET_RESET (CSR_DESC_SET|CSR_FIFO_SET|CSR_HPI_RST|CSR_SV_RST|\
+ CSR_DREAD_RST|CSR_DWRITE_RST|CSR_TRANS_RST)
+#define CSR_CLR_RESET (CSR_DESC_CLEAR|CSR_FIFO_CLEAR|CSR_HPI_RUN|CSR_SV_RUN|\
+ CSR_DREAD_RUN|CSR_DWRITE_RUN|CSR_TRANS_RUN)
+
+
+/* B5_<xx>_F 32 bit flag register (xx) */
+ /* Bit 28..31: reserved */
+#define F_ALM_FULL (1L<<27) /* Bit 27: (ML) FIFO almost full */
+#define F_FIFO_EOF (1L<<26) /* Bit 26: (ML) Fag bit in FIFO */
+#define F_WM_REACHED (1L<<25) /* Bit 25: (ML) Watermark reached */
+#define F_UP_DW_USED (1L<<24) /* Bit 24: (ML) Upper Dword used (bug)*/
+ /* Bit 23: reserved */
+#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 16..22:(ML) # of Qwords in FIFO*/
+ /* Bit 8..15: reserved */
+#define F_ML_WATER_M 0x0000ffL /* Bit 0.. 7:(ML) Watermark */
+#define FLAG_WATER 0x00001fL /* Bit 4..0:(DV) Level of req data tr.*/
+
+/* B5_<xx>_T1 32 bit Test Register 1 (xx) */
+/* Holds four State Machine control Bytes */
+#define SM_CRTL_SV (0xffL<<24) /* Bit 31..24: Control Supervisor SM */
+#define SM_CRTL_RD (0xffL<<16) /* Bit 23..16: Control Read Desc SM */
+#define SM_CRTL_WR (0xffL<<8) /* Bit 15..8: Control Write Desc SM */
+#define SM_CRTL_TR (0xffL<<0) /* Bit 7..0: Control Transfer SM */
+
+/* B4_<xx>_T1_TR 8 bit Test Register 1 TR (xx) */
+/* B4_<xx>_T1_WR 8 bit Test Register 1 WR (xx) */
+/* B4_<xx>_T1_RD 8 bit Test Register 1 RD (xx) */
+/* B4_<xx>_T1_SV 8 bit Test Register 1 SV (xx) */
+/* The control status byte of each machine looks like ... */
+#define SM_STATE 0xf0 /* Bit 7..4: State which shall be loaded */
+#define SM_LOAD 0x08 /* Bit 3: Load the SM with SM_STATE */
+#define SM_TEST_ON 0x04 /* Bit 2: Switch on SM Test Mode */
+#define SM_TEST_OFF 0x02 /* Bit 1: Go off the Test Mode */
+#define SM_STEP 0x01 /* Bit 0: Step the State Machine */
+
+/* The coding of the states */
+#define SM_SV_IDLE 0x0 /* Supervisor Idle Tr/Re */
+#define SM_SV_RES_START 0x1 /* Supervisor Res_Start Tr/Re */
+#define SM_SV_GET_DESC 0x3 /* Supervisor Get_Desc Tr/Re */
+#define SM_SV_CHECK 0x2 /* Supervisor Check Tr/Re */
+#define SM_SV_MOV_DATA 0x6 /* Supervisor Move_Data Tr/Re */
+#define SM_SV_PUT_DESC 0x7 /* Supervisor Put_Desc Tr/Re */
+#define SM_SV_SET_IRQ 0x5 /* Supervisor Set_Irq Tr/Re */
+
+#define SM_RD_IDLE 0x0 /* Read Desc. Idle Tr/Re */
+#define SM_RD_LOAD 0x1 /* Read Desc. Load Tr/Re */
+#define SM_RD_WAIT_TC 0x3 /* Read Desc. Wait_TC Tr/Re */
+#define SM_RD_RST_EOF 0x6 /* Read Desc. Reset_EOF Re */
+#define SM_RD_WDONE_R 0x2 /* Read Desc. Wait_Done Re */
+#define SM_RD_WDONE_T 0x4 /* Read Desc. Wait_Done Tr */
+
+#define SM_TR_IDLE 0x0 /* Trans. Data Idle Tr/Re */
+#define SM_TR_LOAD 0x3 /* Trans. Data Load Tr/Re */
+#define SM_TR_LOAD_R_ML 0x1 /* Trans. Data Load /Re (ML) */
+#define SM_TR_WAIT_TC 0x2 /* Trans. Data Wait_TC Tr/Re */
+#define SM_TR_WDONE 0x4 /* Trans. Data Wait_Done Tr/Re */
+
+#define SM_WR_IDLE 0x0 /* Write Desc. Idle Tr/Re */
+#define SM_WR_ABLEN 0x1 /* Write Desc. Act_Buf_Length Tr/Re */
+#define SM_WR_LD_A4 0x2 /* Write Desc. Load_A4 Re */
+#define SM_WR_RES_OWN 0x2 /* Write Desc. Res_OWN Tr */
+#define SM_WR_WAIT_EOF 0x3 /* Write Desc. Wait_EOF Re */
+#define SM_WR_LD_N2C_R 0x4 /* Write Desc. Load_N2C Re */
+#define SM_WR_WAIT_TC_R 0x5 /* Write Desc. Wait_TC Re */
+#define SM_WR_WAIT_TC4 0x6 /* Write Desc. Wait_TC4 Re */
+#define SM_WR_LD_A_T 0x6 /* Write Desc. Load_A Tr */
+#define SM_WR_LD_A_R 0x7 /* Write Desc. Load_A Re */
+#define SM_WR_WAIT_TC_T 0x7 /* Write Desc. Wait_TC Tr */
+#define SM_WR_LD_N2C_T 0xc /* Write Desc. Load_N2C Tr */
+#define SM_WR_WDONE_T 0x9 /* Write Desc. Wait_Done Tr */
+#define SM_WR_WDONE_R 0xc /* Write Desc. Wait_Done Re */
+#define SM_WR_LD_D_AD 0xe /* Write Desc. Load_Dumr_A Re (ML) */
+#define SM_WR_WAIT_D_TC 0xf /* Write Desc. Wait_Dumr_TC Re (ML) */
+
+/* B5_<xx>_T2 32 bit Test Register 2 (xx) */
+/* Note: This register is only defined for the transmit queues */
+ /* Bit 31..8: reserved */
+#define AC_TEST_ON (1<<7) /* Bit 7: Address Counter Test Mode on */
+#define AC_TEST_OFF (1<<6) /* Bit 6: Address Counter Test Mode off*/
+#define BC_TEST_ON (1<<5) /* Bit 5: Byte Counter Test Mode on */
+#define BC_TEST_OFF (1<<4) /* Bit 4: Byte Counter Test Mode off */
+#define TEST_STEP04 (1<<3) /* Bit 3: Inc AC/Dec BC by 4 */
+#define TEST_STEP03 (1<<2) /* Bit 2: Inc AC/Dec BC by 3 */
+#define TEST_STEP02 (1<<1) /* Bit 1: Inc AC/Dec BC by 2 */
+#define TEST_STEP01 (1<<0) /* Bit 0: Inc AC/Dec BC by 1 */
+
+/* B5_<xx>_T3 32 bit Test Register 3 (xx) */
+/* Note: This register is only defined for the transmit queues */
+ /* Bit 31..8: reserved */
+#define T3_MUX_2 (1<<7) /* Bit 7: (ML) Mux position MSB */
+#define T3_VRAM_2 (1<<6) /* Bit 6: (ML) Virtual RAM buffer addr MSB */
+#define T3_LOOP (1<<5) /* Bit 5: Set Loopback (Xmit) */
+#define T3_UNLOOP (1<<4) /* Bit 4: Unset Loopback (Xmit) */
+#define T3_MUX (3<<2) /* Bit 3..2: Mux position */
+#define T3_VRAM (3<<0) /* Bit 1..0: Virtual RAM buffer Address */
+
+/* PCI card IDs */
+/*
+ * Note: The following 4 byte definitions shall not be used! Use OEM Concept!
+ */
+#define PCI_VEND_ID0 0x48 /* PCI vendor ID (SysKonnect) */
+#define PCI_VEND_ID1 0x11 /* PCI vendor ID (SysKonnect) */
+ /* (High byte) */
+#define PCI_DEV_ID0 0x00 /* PCI device ID */
+#define PCI_DEV_ID1 0x40 /* PCI device ID (High byte) */
+
+/*#define PCI_CLASS 0x02*/ /* PCI class code: network device */
+#define PCI_NW_CLASS 0x02 /* PCI class code: network device */
+#define PCI_SUB_CLASS 0x02 /* PCI subclass ID: FDDI device */
+#define PCI_PROG_INTFC 0x00 /* PCI programming Interface (=0) */
+
+/*
+ * address transmission from logical to physical offset address on board
+ */
+#define FMA(a) (0x0400|((a)<<2)) /* FORMAC+ (r/w) (SN3) */
+#define P1(a) (0x0380|((a)<<2)) /* PLC1 (r/w) (DAS) */
+#define P2(a) (0x0600|((a)<<2)) /* PLC2 (r/w) (covered by the SN3) */
+#define PRA(a) (B2_MAC_0 + (a)) /* configuration PROM (MAC address) */
+
+/*
+ * FlashProm specification
+ */
+#define MAX_PAGES 0x20000L /* Every byte has a single page */
+#define MAX_FADDR 1 /* 1 byte per page */
+
+/*
+ * Receive / Transmit Buffer Control word
+ */
+#define BMU_OWN (1UL<<31) /* OWN bit: 0 == host, 1 == adapter */
+#define BMU_STF (1L<<30) /* Start of Frame ? */
+#define BMU_EOF (1L<<29) /* End of Frame ? */
+#define BMU_EN_IRQ_EOB (1L<<28) /* Enable "End of Buffer" IRQ */
+#define BMU_EN_IRQ_EOF (1L<<27) /* Enable "End of Frame" IRQ */
+#define BMU_DEV_0 (1L<<26) /* RX: don't transfer to system mem */
+#define BMU_SMT_TX (1L<<25) /* TX: if set, buffer type SMT_MBuf */
+#define BMU_ST_BUF (1L<<25) /* RX: copy of start of frame */
+#define BMU_UNUSED (1L<<24) /* Set if the Descr is curr unused */
+#define BMU_SW (3L<<24) /* 2 Bits reserved for SW usage */
+#define BMU_CHECK 0x00550000L /* To identify the control word */
+#define BMU_BBC 0x0000FFFFL /* R/T Buffer Byte Count */
+
+/*
+ * physical address offset + IO-Port base address
+ */
+#ifdef MEM_MAPPED_IO
+#define ADDR(a) (char far *) smc->hw.iop+(a)
+#define ADDRS(smc,a) (char far *) (smc)->hw.iop+(a)
+#else
+#define ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), \
+ (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0)))) : \
+ (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
+#define ADDRS(smc,a) (((a)>>7) ? (outp((smc)->hw.iop+B0_RAP,(a)>>7), \
+ ((smc)->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0)))) : \
+ ((smc)->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
+#endif
+
+/*
+ * Define a macro to access the configuration space
+ */
+#define PCI_C(a) ADDR(B3_CFG_SPC + (a)) /* PCI Config Space */
+
+#define EXT_R(a) ADDR(B6_EXT_REG + (a)) /* External Registers */
+
+/*
+ * Define some values needed for the MAC address (PROM)
+ */
+#define SA_MAC (0) /* start addr. MAC_AD within the PROM */
+#define PRA_OFF (0) /* offset correction when 4th byte reading */
+
+#define SKFDDI_PSZ 8 /* address PROM size */
+
+#define FM_A(a) ADDR(FMA(a)) /* FORMAC Plus physical addr */
+#define P1_A(a) ADDR(P1(a)) /* PLC1 (r/w) */
+#define P2_A(a) ADDR(P2(a)) /* PLC2 (r/w) (DAS) */
+#define PR_A(a) ADDR(PRA(a)) /* config. PROM (MAC address) */
+
+/*
+ * Macro to read the PROM
+ */
+#define READ_PROM(a) ((u_char)inp(a))
+
+#define GET_PAGE(bank) outpd(ADDR(B2_FAR),bank)
+#define VPP_ON()
+#define VPP_OFF()
+
+/*
+ * Note: Values of the Interrupt Source Register are defined above
+ */
+#define ISR_A ADDR(B0_ISRC)
+#define GET_ISR() inpd(ISR_A)
+#define GET_ISR_SMP(iop) inpd((iop)+B0_ISRC)
+#define CHECK_ISR() (inpd(ISR_A) & inpd(ADDR(B0_IMSK)))
+#define CHECK_ISR_SMP(iop) (inpd((iop)+B0_ISRC) & inpd((iop)+B0_IMSK))
+
+#define BUS_CHECK()
+
+/*
+ * CLI_FBI: Disable Board Interrupts
+ * STI_FBI: Enable Board Interrupts
+ */
+#ifndef UNIX
+#define CLI_FBI() outpd(ADDR(B0_IMSK),0)
+#else
+#define CLI_FBI(smc) outpd(ADDRS((smc),B0_IMSK),0)
+#endif
+
+#ifndef UNIX
+#define STI_FBI() outpd(ADDR(B0_IMSK),smc->hw.is_imask)
+#else
+#define STI_FBI(smc) outpd(ADDRS((smc),B0_IMSK),(smc)->hw.is_imask)
+#endif
+
+#define CLI_FBI_SMP(iop) outpd((iop)+B0_IMSK,0)
+#define STI_FBI_SMP(smc,iop) outpd((iop)+B0_IMSK,(smc)->hw.is_imask)
+
+#endif /* PCI */
+/*--------------------------------------------------------------------------*/
+
+/*
+ * 12 bit transfer (dword) counter:
+ * (ISA: 2*trc = number of byte)
+ * (EISA: 4*trc = number of byte)
+ * (MCA: 4*trc = number of byte)
+ */
+#define MAX_TRANS (0x0fff)
+
+/*
+ * PC PIC
+ */
+#define MST_8259 (0x20)
+#define SLV_8259 (0xA0)
+
+#define TPS (18) /* ticks per second */
+
+/*
+ * error timer defs
+ */
+#define TN (4) /* number of supported timer = TN+1 */
+#define SNPPND_TIME (5) /* buffer memory access over mem. data reg. */
+
+#define MAC_AD 0x405a0000
+
+#define MODR1 FM_A(FM_MDREG1) /* mode register 1 */
+#define MODR2 FM_A(FM_MDREG2) /* mode register 2 */
+
+#define CMDR1 FM_A(FM_CMDREG1) /* command register 1 */
+#define CMDR2 FM_A(FM_CMDREG2) /* command register 2 */
+
+
+/*
+ * function defines
+ */
+#define CLEAR(io,mask) outpw((io),inpw(io)&(~(mask)))
+#define SET(io,mask) outpw((io),inpw(io)|(mask))
+#define GET(io,mask) (inpw(io)&(mask))
+#define SETMASK(io,val,mask) outpw((io),(inpw(io) & ~(mask)) | (val))
+
+/*
+ * PHY Port A (PA) = PLC 1
+ * With SuperNet 3 PHY-A and PHY S are identical.
+ */
+#define PLC(np,reg) (((np) == PA) ? P2_A(reg) : P1_A(reg))
+
+/*
+ * set memory address register for write and read
+ */
+#define MARW(ma) outpw(FM_A(FM_MARW),(unsigned int)(ma))
+#define MARR(ma) outpw(FM_A(FM_MARR),(unsigned int)(ma))
+
+/*
+ * read/write from/to memory data register
+ */
+/* write double word */
+#define MDRW(dd) outpw(FM_A(FM_MDRU),(unsigned int)((dd)>>16)) ;\
+ outpw(FM_A(FM_MDRL),(unsigned int)(dd))
+
+#ifndef WINNT
+/* read double word */
+#define MDRR() (((long)inpw(FM_A(FM_MDRU))<<16) + inpw(FM_A(FM_MDRL)))
+
+/* read FORMAC+ 32-bit status register */
+#define GET_ST1() (((long)inpw(FM_A(FM_ST1U))<<16) + inpw(FM_A(FM_ST1L)))
+#define GET_ST2() (((long)inpw(FM_A(FM_ST2U))<<16) + inpw(FM_A(FM_ST2L)))
+#ifdef SUPERNET_3
+#define GET_ST3() (((long)inpw(FM_A(FM_ST3U))<<16) + inpw(FM_A(FM_ST3L)))
+#endif
+#else
+/* read double word */
+#define MDRR() inp2w((FM_A(FM_MDRU)),(FM_A(FM_MDRL)))
+
+/* read FORMAC+ 32-bit status register */
+#define GET_ST1() inp2w((FM_A(FM_ST1U)),(FM_A(FM_ST1L)))
+#define GET_ST2() inp2w((FM_A(FM_ST2U)),(FM_A(FM_ST2L)))
+#ifdef SUPERNET_3
+#define GET_ST3() inp2w((FM_A(FM_ST3U)),(FM_A(FM_ST3L)))
+#endif
+#endif
+
+/* Special timer macro for 82c54 */
+ /* timer access over data bus bit 8..15 */
+#define OUT_82c54_TIMER(port,val) outpw(TI_A(port),(val)<<8)
+#define IN_82c54_TIMER(port) ((inpw(TI_A(port))>>8) & 0xff)
+
+
+#ifdef DEBUG
+#define DB_MAC(mac,st) {if (debug_mac & 0x1)\
+ printf("M") ;\
+ if (debug_mac & 0x2)\
+ printf("\tMAC %d status 0x%08lx\n",mac,st) ;\
+ if (debug_mac & 0x4)\
+ dp_mac(mac,st) ;\
+}
+
+#define DB_PLC(p,iev) { if (debug_plc & 0x1)\
+ printf("P") ;\
+ if (debug_plc & 0x2)\
+ printf("\tPLC %s Int 0x%04x\n", \
+ (p == PA) ? "A" : "B", iev) ;\
+ if (debug_plc & 0x4)\
+ dp_plc(p,iev) ;\
+}
+
+#define DB_TIMER() { if (debug_timer & 0x1)\
+ printf("T") ;\
+ if (debug_timer & 0x2)\
+ printf("\tTimer ISR\n") ;\
+}
+
+#else /* no DEBUG */
+
+#define DB_MAC(mac,st)
+#define DB_PLC(p,iev)
+#define DB_TIMER()
+
+#endif /* no DEBUG */
+
+#define INC_PTR(sp,cp,ep) if (++cp == ep) cp = sp
+/*
+ * timer defs
+ */
+#define COUNT(t) ((t)<<6) /* counter */
+#define RW_OP(o) ((o)<<4) /* read/write operation */
+#define TMODE(m) ((m)<<1) /* timer mode */
+
+#endif
diff --git a/drivers/net/fddi/skfp/h/skfbiinc.h b/drivers/net/fddi/skfp/h/skfbiinc.h
new file mode 100644
index 000000000..ce72557c3
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/skfbiinc.h
@@ -0,0 +1,97 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SKFBIINC_
+#define _SKFBIINC_
+
+#include "supern_2.h"
+
+/*
+ * special defines for use into .asm files
+ */
+#define ERR_FLAGS (FS_MSRABT | FS_SEAC2 | FS_SFRMERR | FS_SFRMTY1)
+
+#ifdef PCI
+#define IMASK_FAST (IS_PLINT1 | IS_PLINT2 | IS_TIMINT | IS_TOKEN | \
+ IS_MINTR2 | IS_MINTR3 | IS_R1_P | \
+ IS_R1_C | IS_XA_C | IS_XS_C)
+#endif
+
+#ifdef PCI
+#define ISR_MASK (IS_MINTR1 | IS_R1_F | IS_XS_F| IS_XA_F | IMASK_FAST)
+#else
+#define ISR_MASK (IS_MINTR1 | IS_MINTR2 | IMASK_FAST)
+#endif
+
+#define FMA_FM_CMDREG1 FMA(FM_CMDREG1)
+#define FMA_FM_CMDREG2 FMA(FM_CMDREG2)
+#define FMA_FM_STMCHN FMA(FM_STMCHN)
+#define FMA_FM_RPR FMA(FM_RPR)
+#define FMA_FM_WPXA0 FMA(FM_WPXA0)
+#define FMA_FM_WPXA2 FMA(FM_WPXA2)
+#define FMA_FM_MARR FMA(FM_MARR)
+#define FMA_FM_MARW FMA(FM_MARW)
+#define FMA_FM_MDRU FMA(FM_MDRU)
+#define FMA_FM_MDRL FMA(FM_MDRL)
+#define FMA_ST1L FMA(FM_ST1L)
+#define FMA_ST1U FMA(FM_ST1U)
+#define FMA_ST2L FMA(FM_ST2L)
+#define FMA_ST2U FMA(FM_ST2U)
+#ifdef SUPERNET_3
+#define FMA_ST3L FMA(FM_ST3L)
+#define FMA_ST3U FMA(FM_ST3U)
+#endif
+
+#define TMODE_RRQ RQ_RRQ
+#define TMODE_WAQ2 RQ_WA2
+#define HSRA HSR(0)
+
+
+#define FMA_FM_ST1L FMA_ST1L
+#define FMA_FM_ST1U FMA_ST1U
+#define FMA_FM_ST2L FMA_ST2L
+#define FMA_FM_ST2U FMA_ST2U
+#ifdef SUPERNET_3
+#define FMA_FM_ST3L FMA_ST3L
+#define FMA_FM_ST3U FMA_ST3U
+#endif
+
+#define FMA_FM_SWPR FMA(FM_SWPR)
+
+#define FMA_FM_RPXA0 FMA(FM_RPXA0)
+
+#define FMA_FM_RPXS FMA(FM_RPXS)
+#define FMA_FM_WPXS FMA(FM_WPXS)
+
+#define FMA_FM_IMSK1U FMA(FM_IMSK1U)
+#define FMA_FM_IMSK1L FMA(FM_IMSK1L)
+
+#define FMA_FM_EAS FMA(FM_EAS)
+#define FMA_FM_EAA0 FMA(FM_EAA0)
+
+#define TMODE_WAQ0 RQ_WA0
+#define TMODE_WSQ RQ_WSQ
+
+/* Define default for DRV_PCM_STATE_CHANGE */
+#ifndef DRV_PCM_STATE_CHANGE
+#define DRV_PCM_STATE_CHANGE(smc,plc,p_state) /* nothing */
+#endif
+
+/* Define default for DRV_RMT_INDICATION */
+#ifndef DRV_RMT_INDICATION
+#define DRV_RMT_INDICATION(smc,i) /* nothing */
+#endif
+
+#endif /* n_SKFBIINC_ */
+
diff --git a/drivers/net/fddi/skfp/h/smc.h b/drivers/net/fddi/skfp/h/smc.h
new file mode 100644
index 000000000..bd1166bf8
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smc.h
@@ -0,0 +1,488 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SCMECM_
+#define _SCMECM_
+
+#if defined(PCI) && !defined(OSDEF)
+/*
+ * In the case of the PCI bus the file osdef1st.h must be present
+ */
+#define OSDEF
+#endif
+
+#ifdef PCI
+#ifndef SUPERNET_3
+#define SUPERNET_3
+#endif
+#ifndef TAG_MODE
+#define TAG_MODE
+#endif
+#endif
+
+/*
+ * include all other files in required order
+ * the following files must have been included before:
+ * types.h
+ * fddi.h
+ */
+#ifdef OSDEF
+#include "osdef1st.h"
+#endif /* OSDEF */
+#ifdef OEM_CONCEPT
+#include "oemdef.h"
+#endif /* OEM_CONCEPT */
+#include "smt.h"
+#include "cmtdef.h"
+#include "fddimib.h"
+#include "targethw.h" /* all target hw dependencies */
+#include "targetos.h" /* all target os dependencies */
+#ifdef ESS
+#include "sba.h"
+#endif
+
+/*
+ * Event Queue
+ * queue.c
+ * events are class/value pairs
+ * class is addressee, e.g. RMT, PCM etc.
+ * value is command, e.g. line state change, ring op change etc.
+ */
+struct event_queue {
+ u_short class ; /* event class */
+ u_short event ; /* event value */
+} ;
+
+/*
+ * define event queue as circular buffer
+ */
+#ifdef CONCENTRATOR
+#define MAX_EVENT 128
+#else /* nCONCENTRATOR */
+#define MAX_EVENT 64
+#endif /* nCONCENTRATOR */
+
+struct s_queue {
+
+ struct event_queue ev_queue[MAX_EVENT];
+ struct event_queue *ev_put ;
+ struct event_queue *ev_get ;
+} ;
+
+/*
+ * ECM - Entity Coordination Management
+ * ecm.c
+ */
+struct s_ecm {
+ u_char path_test ; /* ECM path test variable */
+ u_char sb_flag ; /* ECM stuck bypass */
+ u_char DisconnectFlag ; /* jd 05-Aug-1999 Bug #10419
+ * ECM disconnected */
+ u_char ecm_line_state ; /* flag to dispatcher : line states */
+ u_long trace_prop ; /* ECM Trace_Prop flag >= 16 bits !! */
+ /* NUMPHYS note:
+ * this variable must have enough bits to hold all entiies in
+ * the station. So NUMPHYS may not be greater than 31.
+ */
+ char ec_pad[2] ;
+ struct smt_timer ecm_timer ; /* timer */
+} ;
+
+
+/*
+ * RMT - Ring Management
+ * rmt.c
+ */
+struct s_rmt {
+ u_char dup_addr_test ; /* state of dupl. addr. test */
+ u_char da_flag ; /* flag : duplicate address det. */
+ u_char loop_avail ; /* flag : MAC available for loopback */
+ u_char sm_ma_avail ; /* flag : MAC available for SMT */
+ u_char no_flag ; /* flag : ring not operational */
+ u_char bn_flag ; /* flag : MAC reached beacon state */
+ u_char jm_flag ; /* flag : jamming in NON_OP_DUP */
+ u_char rm_join ; /* CFM flag RM_Join */
+ u_char rm_loop ; /* CFM flag RM_Loop */
+
+ long fast_rm_join ; /* bit mask of active ports */
+ /*
+ * timer and flags
+ */
+ struct smt_timer rmt_timer0 ; /* timer 0 */
+ struct smt_timer rmt_timer1 ; /* timer 1 */
+ struct smt_timer rmt_timer2 ; /* timer 2 */
+ u_char timer0_exp ; /* flag : timer 0 expired */
+ u_char timer1_exp ; /* flag : timer 1 expired */
+ u_char timer2_exp ; /* flag : timer 2 expired */
+
+ u_char rm_pad1[1] ;
+} ;
+
+/*
+ * CFM - Configuration Management
+ * cfm.c
+ * used for SAS and DAS
+ */
+struct s_cfm {
+ u_char cf_state; /* CFM state machine current state */
+ u_char cf_pad[3] ;
+} ;
+
+/*
+ * CEM - Configuration Element Management
+ * cem.c
+ * used for Concentrator
+ */
+#ifdef CONCENTRATOR
+struct s_cem {
+ int ce_state ; /* CEM state */
+ int ce_port ; /* PA PB PM PM+1 .. */
+ int ce_type ; /* TA TB TS TM */
+} ;
+
+/*
+ * linked list of CCEs in current token path
+ */
+struct s_c_ring {
+ struct s_c_ring *c_next ;
+ char c_entity ;
+} ;
+
+struct mib_path_config {
+ u_long fddimibPATHConfigSMTIndex;
+ u_long fddimibPATHConfigPATHIndex;
+ u_long fddimibPATHConfigTokenOrder;
+ u_long fddimibPATHConfigResourceType;
+#define SNMP_RES_TYPE_MAC 2 /* Resource is a MAC */
+#define SNMP_RES_TYPE_PORT 4 /* Resource is a PORT */
+ u_long fddimibPATHConfigResourceIndex;
+ u_long fddimibPATHConfigCurrentPath;
+#define SNMP_PATH_ISOLATED 1 /* Current path is isolated */
+#define SNMP_PATH_LOCAL 2 /* Current path is local */
+#define SNMP_PATH_SECONDARY 3 /* Current path is secondary */
+#define SNMP_PATH_PRIMARY 4 /* Current path is primary */
+#define SNMP_PATH_CONCATENATED 5 /* Current path is concatenated */
+#define SNMP_PATH_THRU 6 /* Current path is thru */
+};
+
+
+#endif
+
+/*
+ * PCM connect states
+ */
+#define PCM_DISABLED 0
+#define PCM_CONNECTING 1
+#define PCM_STANDBY 2
+#define PCM_ACTIVE 3
+
+struct s_pcm {
+ u_char pcm_pad[3] ;
+} ;
+
+/*
+ * PHY struct
+ * one per physical port
+ */
+struct s_phy {
+ /* Inter Module Globals */
+ struct fddi_mib_p *mib ;
+
+ u_char np ; /* index 0 .. NUMPHYS */
+ u_char cf_join ;
+ u_char cf_loop ;
+ u_char wc_flag ; /* withhold connection flag */
+ u_char pc_mode ; /* Holds the negotiated mode of the PCM */
+ u_char pc_lem_fail ; /* flag : LCT failed */
+ u_char lc_test ;
+ u_char scrub ; /* CFM flag Scrub -> PCM */
+ char phy_name ;
+ u_char pmd_type[2] ; /* SK connector/transceiver type codes */
+#define PMD_SK_CONN 0 /* pmd_type[PMD_SK_CONN] = Connector */
+#define PMD_SK_PMD 1 /* pmd_type[PMD_SK_PMD] = Xver */
+ u_char pmd_scramble ; /* scrambler on/off */
+
+ /* inner Module Globals */
+ u_char curr_ls ; /* current line state */
+ u_char ls_flag ;
+ u_char rc_flag ;
+ u_char tc_flag ;
+ u_char td_flag ;
+ u_char bitn ;
+ u_char tr_flag ; /* trace recvd while in active */
+ u_char twisted ; /* flag to indicate an A-A or B-B connection */
+ u_char t_val[NUMBITS] ; /* transmit bits for signaling */
+ u_char r_val[NUMBITS] ; /* receive bits for signaling */
+ u_long t_next[NUMBITS] ;
+ struct smt_timer pcm_timer0 ;
+ struct smt_timer pcm_timer1 ;
+ struct smt_timer pcm_timer2 ;
+ u_char timer0_exp ;
+ u_char timer1_exp ;
+ u_char timer2_exp ;
+ u_char pcm_pad1[1] ;
+ int cem_pst ; /* CEM privae state; used for dual homing */
+ struct lem_counter lem ;
+#ifdef AMDPLC
+ struct s_plc plc ;
+#endif
+} ;
+
+/*
+ * timer package
+ * smttimer.c
+ */
+struct s_timer {
+ struct smt_timer *st_queue ;
+ struct smt_timer st_fast ;
+} ;
+
+/*
+ * SRF types and data
+ */
+#define SMT_EVENT_BASE 1
+#define SMT_EVENT_MAC_PATH_CHANGE (SMT_EVENT_BASE+0)
+#define SMT_EVENT_MAC_NEIGHBOR_CHANGE (SMT_EVENT_BASE+1)
+#define SMT_EVENT_PORT_PATH_CHANGE (SMT_EVENT_BASE+2)
+#define SMT_EVENT_PORT_CONNECTION (SMT_EVENT_BASE+3)
+
+#define SMT_IS_CONDITION(x) ((x)>=SMT_COND_BASE)
+
+#define SMT_COND_BASE (SMT_EVENT_PORT_CONNECTION+1)
+#define SMT_COND_SMT_PEER_WRAP (SMT_COND_BASE+0)
+#define SMT_COND_SMT_HOLD (SMT_COND_BASE+1)
+#define SMT_COND_MAC_FRAME_ERROR (SMT_COND_BASE+2)
+#define SMT_COND_MAC_DUP_ADDR (SMT_COND_BASE+3)
+#define SMT_COND_MAC_NOT_COPIED (SMT_COND_BASE+4)
+#define SMT_COND_PORT_EB_ERROR (SMT_COND_BASE+5)
+#define SMT_COND_PORT_LER (SMT_COND_BASE+6)
+
+#define SR0_WAIT 0
+#define SR1_HOLDOFF 1
+#define SR2_DISABLED 2
+
+struct s_srf {
+ u_long SRThreshold ; /* threshold value */
+ u_char RT_Flag ; /* report transmitted flag */
+ u_char sr_state ; /* state-machine */
+ u_char any_report ; /* any report required */
+ u_long TSR ; /* timer */
+ u_short ring_status ; /* IBM ring status */
+} ;
+
+/*
+ * IBM token ring status
+ */
+#define RS_RES15 (1<<15) /* reserved */
+#define RS_HARDERROR (1<<14) /* ring down */
+#define RS_SOFTERROR (1<<13) /* sent SRF */
+#define RS_BEACON (1<<12) /* transmitted beacon */
+#define RS_PATHTEST (1<<11) /* path test failed */
+#define RS_SELFTEST (1<<10) /* selftest required */
+#define RS_RES9 (1<< 9) /* reserved */
+#define RS_DISCONNECT (1<< 8) /* remote disconnect */
+#define RS_RES7 (1<< 7) /* reserved */
+#define RS_DUPADDR (1<< 6) /* duplicate address */
+#define RS_NORINGOP (1<< 5) /* no ring op */
+#define RS_VERSION (1<< 4) /* SMT version mismatch */
+#define RS_STUCKBYPASSS (1<< 3) /* stuck bypass */
+#define RS_EVENT (1<< 2) /* FDDI event occurred */
+#define RS_RINGOPCHANGE (1<< 1) /* ring op changed */
+#define RS_RES0 (1<< 0) /* reserved */
+
+#define RS_SET(smc,bit) \
+ ring_status_indication(smc,smc->srf.ring_status |= bit)
+#define RS_CLEAR(smc,bit) \
+ ring_status_indication(smc,smc->srf.ring_status &= ~bit)
+
+#define RS_CLEAR_EVENT (0xffff & ~(RS_NORINGOP))
+
+/* Define the AIX-event-Notification as null function if it isn't defined */
+/* in the targetos.h file */
+#ifndef AIX_EVENT
+#define AIX_EVENT(smc,opt0,opt1,opt2,opt3) /* nothing */
+#endif
+
+struct s_srf_evc {
+ u_char evc_code ; /* event code type */
+ u_char evc_index ; /* index for mult. instances */
+ u_char evc_rep_required ; /* report required */
+ u_short evc_para ; /* SMT Para Number */
+ u_char *evc_cond_state ; /* condition state */
+ u_char *evc_multiple ; /* multiple occurrence */
+} ;
+
+/*
+ * Values used by frame based services
+ * smt.c
+ */
+#define SMT_MAX_TEST 5
+#define SMT_TID_NIF 0 /* pending NIF request */
+#define SMT_TID_NIF_TEST 1 /* pending NIF test */
+#define SMT_TID_ECF_UNA 2 /* pending ECF UNA test */
+#define SMT_TID_ECF_DNA 3 /* pending ECF DNA test */
+#define SMT_TID_ECF 4 /* pending ECF test */
+
+struct smt_values {
+ u_long smt_tvu ; /* timer valid una */
+ u_long smt_tvd ; /* timer valid dna */
+ u_long smt_tid ; /* transaction id */
+ u_long pend[SMT_MAX_TEST] ; /* TID of requests */
+ u_long uniq_time ; /* unique time stamp */
+ u_short uniq_ticks ; /* unique time stamp */
+ u_short please_reconnect ; /* flag : reconnect */
+ u_long smt_last_lem ;
+ u_long smt_last_notify ;
+ struct smt_timer smt_timer ; /* SMT NIF timer */
+ u_long last_tok_time[NUMMACS]; /* token cnt emulation */
+} ;
+
+/*
+ * SMT/CMT configurable parameters
+ */
+#define SMT_DAS 0 /* dual attach */
+#define SMT_SAS 1 /* single attach */
+#define SMT_NAC 2 /* null attach concentrator */
+
+struct smt_config {
+ u_char attach_s ; /* CFM attach to secondary path */
+ u_char sas ; /* SMT_DAS/SAS/NAC */
+ u_char build_ring_map ; /* build ringmap if TRUE */
+ u_char numphys ; /* number of active phys */
+ u_char sc_pad[1] ;
+
+ u_long pcm_tb_min ; /* PCM : TB_Min timer value */
+ u_long pcm_tb_max ; /* PCM : TB_Max timer value */
+ u_long pcm_c_min ; /* PCM : C_Min timer value */
+ u_long pcm_t_out ; /* PCM : T_Out timer value */
+ u_long pcm_tl_min ; /* PCM : TL_min timer value */
+ u_long pcm_lc_short ; /* PCM : LC_Short timer value */
+ u_long pcm_lc_medium ; /* PCM : LC_Medium timer value */
+ u_long pcm_lc_long ; /* PCM : LC_Long timer value */
+ u_long pcm_lc_extended ; /* PCM : LC_Extended timer value */
+ u_long pcm_t_next_9 ; /* PCM : T_Next[9] timer value */
+ u_long pcm_ns_max ; /* PCM : NS_Max timer value */
+
+ u_long ecm_i_max ; /* ECM : I_Max timer value */
+ u_long ecm_in_max ; /* ECM : IN_Max timer value */
+ u_long ecm_td_min ; /* ECM : TD_Min timer */
+ u_long ecm_test_done ; /* ECM : path test done timer */
+ u_long ecm_check_poll ; /* ECM : check bypass poller */
+
+ u_long rmt_t_non_op ; /* RMT : T_Non_OP timer value */
+ u_long rmt_t_stuck ; /* RMT : T_Stuck timer value */
+ u_long rmt_t_direct ; /* RMT : T_Direct timer value */
+ u_long rmt_t_jam ; /* RMT : T_Jam timer value */
+ u_long rmt_t_announce ; /* RMT : T_Announce timer value */
+ u_long rmt_t_poll ; /* RMT : claim/beacon poller */
+ u_long rmt_dup_mac_behavior ; /* Flag for the beavior of SMT if
+ * a Duplicate MAC Address was detected.
+ * FALSE: SMT will leave finally the ring
+ * TRUE: SMT will reinstert into the ring
+ */
+ u_long mac_d_max ; /* MAC : D_Max timer value */
+
+ u_long lct_short ; /* LCT : error threshold */
+ u_long lct_medium ; /* LCT : error threshold */
+ u_long lct_long ; /* LCT : error threshold */
+ u_long lct_extended ; /* LCT : error threshold */
+} ;
+
+#ifdef DEBUG
+/*
+ * Debugging struct sometimes used in smc
+ */
+struct smt_debug {
+ int d_smtf ;
+ int d_smt ;
+ int d_ecm ;
+ int d_rmt ;
+ int d_cfm ;
+ int d_pcm ;
+ int d_plc ;
+#ifdef ESS
+ int d_ess ;
+#endif
+#ifdef SBA
+ int d_sba ;
+#endif
+ struct os_debug d_os; /* Include specific OS DEBUG struct */
+} ;
+
+#ifndef DEBUG_BRD
+/* all boards shall be debugged with one debug struct */
+extern struct smt_debug debug; /* Declaration of debug struct */
+#endif /* DEBUG_BRD */
+
+#endif /* DEBUG */
+
+/*
+ * the SMT Context Struct SMC
+ * this struct contains ALL global variables of SMT
+ */
+struct s_smc {
+ struct s_smt_os os ; /* os specific */
+ struct s_smt_hw hw ; /* hardware */
+
+/*
+ * NOTE: os and hw MUST BE the first two structs
+ * anything beyond hw WILL BE SET TO ZERO in smt_set_defaults()
+ */
+ struct smt_config s ; /* smt constants */
+ struct smt_values sm ; /* smt variables */
+ struct s_ecm e ; /* ecm */
+ struct s_rmt r ; /* rmt */
+ struct s_cfm cf ; /* cfm/cem */
+#ifdef CONCENTRATOR
+ struct s_cem ce[NUMPHYS] ; /* cem */
+ struct s_c_ring cr[NUMPHYS+NUMMACS] ;
+#endif
+ struct s_pcm p ; /* pcm */
+ struct s_phy y[NUMPHYS] ; /* phy */
+ struct s_queue q ; /* queue */
+ struct s_timer t ; /* timer */
+ struct s_srf srf ; /* SRF */
+ struct s_srf_evc evcs[6+NUMPHYS*4] ;
+ struct fddi_mib mib ; /* __THE_MIB__ */
+#ifdef SBA
+ struct s_sba sba ; /* SBA variables */
+#endif
+#ifdef ESS
+ struct s_ess ess ; /* Ess variables */
+#endif
+#if defined(DEBUG) && defined(DEBUG_BRD)
+ /* If you want all single board to be debugged separately */
+ struct smt_debug debug; /* Declaration of debug struct */
+#endif /* DEBUG_BRD && DEBUG */
+} ;
+
+extern const struct fddi_addr fddi_broadcast;
+
+void all_selection_criteria(struct s_smc *smc);
+void card_stop(struct s_smc *smc);
+void init_board(struct s_smc *smc, u_char *mac_addr);
+int init_fplus(struct s_smc *smc);
+void init_plc(struct s_smc *smc);
+int init_smt(struct s_smc *smc, u_char *mac_addr);
+void mac1_irq(struct s_smc *smc, u_short stu, u_short stl);
+void mac2_irq(struct s_smc *smc, u_short code_s2u, u_short code_s2l);
+void mac3_irq(struct s_smc *smc, u_short code_s3u, u_short code_s3l);
+int pcm_status_twisted(struct s_smc *smc);
+void plc1_irq(struct s_smc *smc);
+void plc2_irq(struct s_smc *smc);
+void read_address(struct s_smc *smc, u_char *mac_addr);
+void timer_irq(struct s_smc *smc);
+
+#endif /* _SCMECM_ */
+
diff --git a/drivers/net/fddi/skfp/h/smt.h b/drivers/net/fddi/skfp/h/smt.h
new file mode 100644
index 000000000..2030f9cbb
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smt.h
@@ -0,0 +1,882 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * SMT 7.2 frame definitions
+ */
+
+#ifndef _SMT_
+#define _SMT_
+
+/* #define SMT5_10 */
+#define SMT6_10
+#define SMT7_20
+
+#define OPT_PMF /* if parameter management is supported */
+#define OPT_SRF /* if status report is supported */
+
+/*
+ * SMT frame version 5.1
+ */
+
+#define SMT_VID 0x0001 /* V 5.1 .. 6.1 */
+#define SMT_VID_2 0x0002 /* V 7.2 */
+
+struct smt_sid {
+ u_char sid_oem[2] ; /* implementation spec. */
+ struct fddi_addr sid_node ; /* node address */
+} ;
+
+typedef u_char t_station_id[8] ;
+
+/*
+ * note on alignment :
+ * sizeof(struct smt_header) = 32
+ * all parameters are long aligned
+ * if struct smt_header starts at offset 0, all longs are aligned correctly
+ * (FC starts at offset 3)
+ */
+_packed struct smt_header {
+ struct fddi_addr smt_dest ; /* destination address */
+ struct fddi_addr smt_source ; /* source address */
+ u_char smt_class ; /* NIF, SIF ... */
+ u_char smt_type ; /* req., response .. */
+ u_short smt_version ; /* version id */
+ u_int smt_tid ; /* transaction ID */
+ struct smt_sid smt_sid ; /* station ID */
+ u_short smt_pad ; /* pad with 0 */
+ u_short smt_len ; /* length of info field */
+} ;
+#define SWAP_SMTHEADER "662sl8ss"
+
+#if 0
+/*
+ * MAC FC values
+ */
+#define FC_SMT_INFO 0x41 /* SMT info */
+#define FC_SMT_NSA 0x4f /* SMT Next Station Addressing */
+#endif
+
+
+/*
+ * type codes
+ */
+#define SMT_ANNOUNCE 0x01 /* announcement */
+#define SMT_REQUEST 0x02 /* request */
+#define SMT_REPLY 0x03 /* reply */
+
+/*
+ * class codes
+ */
+#define SMT_NIF 0x01 /* neighbor information frames */
+#define SMT_SIF_CONFIG 0x02 /* station information configuration */
+#define SMT_SIF_OPER 0x03 /* station information operation */
+#define SMT_ECF 0x04 /* echo frames */
+#define SMT_RAF 0x05 /* resource allocation */
+#define SMT_RDF 0x06 /* request denied */
+#define SMT_SRF 0x07 /* status report */
+#define SMT_PMF_GET 0x08 /* parameter management get */
+#define SMT_PMF_SET 0x09 /* parameter management set */
+#define SMT_ESF 0xff /* extended service */
+
+#define SMT_MAX_ECHO_LEN 4458 /* max length of SMT Echo */
+#if defined(CONC) || defined(CONC_II)
+#define SMT_TEST_ECHO_LEN 50 /* test length of SMT Echo */
+#else
+#define SMT_TEST_ECHO_LEN SMT_MAX_ECHO_LEN /* test length */
+#endif
+
+#define SMT_MAX_INFO_LEN (4352-20) /* max length for SMT info */
+
+
+/*
+ * parameter types
+ */
+
+struct smt_para {
+ u_short p_type ; /* type */
+ u_short p_len ; /* length of parameter */
+} ;
+
+#define PARA_LEN (sizeof(struct smt_para))
+
+#define SMTSETPARA(p,t) (p)->para.p_type = (t),\
+ (p)->para.p_len = sizeof(*(p)) - PARA_LEN
+
+/*
+ * P01 : Upstream Neighbor Address, UNA
+ */
+#define SMT_P_UNA 0x0001 /* upstream neighbor address */
+#define SWAP_SMT_P_UNA "s6"
+
+struct smt_p_una {
+ struct smt_para para ; /* generic parameter header */
+ u_short una_pad ;
+ struct fddi_addr una_node ; /* node address, zero if unknown */
+} ;
+
+/*
+ * P02 : Station Descriptor
+ */
+#define SMT_P_SDE 0x0002 /* station descriptor */
+#define SWAP_SMT_P_SDE "1111"
+
+#define SMT_SDE_STATION 0 /* end node */
+#define SMT_SDE_CONCENTRATOR 1 /* concentrator */
+
+struct smt_p_sde {
+ struct smt_para para ; /* generic parameter header */
+ u_char sde_type ; /* station type */
+ u_char sde_mac_count ; /* number of MACs */
+ u_char sde_non_master ; /* number of A,B or S ports */
+ u_char sde_master ; /* number of S ports on conc. */
+} ;
+
+/*
+ * P03 : Station State
+ */
+#define SMT_P_STATE 0x0003 /* station state */
+#define SWAP_SMT_P_STATE "scc"
+
+struct smt_p_state {
+ struct smt_para para ; /* generic parameter header */
+ u_short st_pad ;
+ u_char st_topology ; /* topology */
+ u_char st_dupl_addr ; /* duplicate address detected */
+} ;
+#define SMT_ST_WRAPPED (1<<0) /* station wrapped */
+#define SMT_ST_UNATTACHED (1<<1) /* unattached concentrator */
+#define SMT_ST_TWISTED_A (1<<2) /* A-A connection, twisted ring */
+#define SMT_ST_TWISTED_B (1<<3) /* B-B connection, twisted ring */
+#define SMT_ST_ROOTED_S (1<<4) /* rooted station */
+#define SMT_ST_SRF (1<<5) /* SRF protocol supported */
+#define SMT_ST_SYNC_SERVICE (1<<6) /* use synchronous bandwidth */
+
+#define SMT_ST_MY_DUPA (1<<0) /* my station detected dupl. */
+#define SMT_ST_UNA_DUPA (1<<1) /* my UNA detected duplicate */
+
+/*
+ * P04 : timestamp
+ */
+#define SMT_P_TIMESTAMP 0x0004 /* time stamp */
+#define SWAP_SMT_P_TIMESTAMP "8"
+struct smt_p_timestamp {
+ struct smt_para para ; /* generic parameter header */
+ u_char ts_time[8] ; /* time, resolution 80nS, unique */
+} ;
+
+/*
+ * P05 : station policies
+ */
+#define SMT_P_POLICY 0x0005 /* station policies */
+#define SWAP_SMT_P_POLICY "ss"
+
+struct smt_p_policy {
+ struct smt_para para ; /* generic parameter header */
+ u_short pl_config ;
+ u_short pl_connect ; /* bit string POLICY_AA ... */
+} ;
+#define SMT_PL_HOLD 1 /* hold policy supported (Dual MAC) */
+
+/*
+ * P06 : latency equivalent
+ */
+#define SMT_P_LATENCY 0x0006 /* latency */
+#define SWAP_SMT_P_LATENCY "ssss"
+
+/*
+ * note: latency has two phy entries by definition
+ * for a SAS, the 2nd one is null
+ */
+struct smt_p_latency {
+ struct smt_para para ; /* generic parameter header */
+ u_short lt_phyout_idx1 ; /* index */
+ u_short lt_latency1 ; /* latency , unit : byte clock */
+ u_short lt_phyout_idx2 ; /* 0 if SAS */
+ u_short lt_latency2 ; /* 0 if SAS */
+} ;
+
+/*
+ * P07 : MAC neighbors
+ */
+#define SMT_P_NEIGHBORS 0x0007 /* MAC neighbor description */
+#define SWAP_SMT_P_NEIGHBORS "ss66"
+
+struct smt_p_neighbor {
+ struct smt_para para ; /* generic parameter header */
+ u_short nb_mib_index ; /* MIB index */
+ u_short nb_mac_index ; /* n+1 .. n+m, m = #MACs, n = #PHYs */
+ struct fddi_addr nb_una ; /* UNA , 0 for unknown */
+ struct fddi_addr nb_dna ; /* DNA , 0 for unknown */
+} ;
+
+/*
+ * PHY record
+ */
+#define SMT_PHY_A 0 /* A port */
+#define SMT_PHY_B 1 /* B port */
+#define SMT_PHY_S 2 /* slave port */
+#define SMT_PHY_M 3 /* master port */
+
+#define SMT_CS_DISABLED 0 /* connect state : disabled */
+#define SMT_CS_CONNECTING 1 /* connect state : connecting */
+#define SMT_CS_STANDBY 2 /* connect state : stand by */
+#define SMT_CS_ACTIVE 3 /* connect state : active */
+
+#define SMT_RM_NONE 0
+#define SMT_RM_MAC 1
+
+struct smt_phy_rec {
+ u_short phy_mib_index ; /* MIB index */
+ u_char phy_type ; /* A/B/S/M */
+ u_char phy_connect_state ; /* disabled/connecting/active */
+ u_char phy_remote_type ; /* A/B/S/M */
+ u_char phy_remote_mac ; /* none/remote */
+ u_short phy_resource_idx ; /* 1 .. n */
+} ;
+
+/*
+ * MAC record
+ */
+struct smt_mac_rec {
+ struct fddi_addr mac_addr ; /* MAC address */
+ u_short mac_resource_idx ; /* n+1 .. n+m */
+} ;
+
+/*
+ * P08 : path descriptors
+ * should be really an array ; however our environment has a fixed number of
+ * PHYs and MACs
+ */
+#define SMT_P_PATH 0x0008 /* path descriptor */
+#define SWAP_SMT_P_PATH "[6s]"
+
+struct smt_p_path {
+ struct smt_para para ; /* generic parameter header */
+ struct smt_phy_rec pd_phy[2] ; /* PHY A */
+ struct smt_mac_rec pd_mac ; /* MAC record */
+} ;
+
+/*
+ * P09 : MAC status
+ */
+#define SMT_P_MAC_STATUS 0x0009 /* MAC status */
+#define SWAP_SMT_P_MAC_STATUS "sslllllllll"
+
+struct smt_p_mac_status {
+ struct smt_para para ; /* generic parameter header */
+ u_short st_mib_index ; /* MIB index */
+ u_short st_mac_index ; /* n+1 .. n+m */
+ u_int st_t_req ; /* T_Req */
+ u_int st_t_neg ; /* T_Neg */
+ u_int st_t_max ; /* T_Max */
+ u_int st_tvx_value ; /* TVX_Value */
+ u_int st_t_min ; /* T_Min */
+ u_int st_sba ; /* synchr. bandwidth alloc */
+ u_int st_frame_ct ; /* frame counter */
+ u_int st_error_ct ; /* error counter */
+ u_int st_lost_ct ; /* lost frames counter */
+} ;
+
+/*
+ * P0A : PHY link error rate monitoring
+ */
+#define SMT_P_LEM 0x000a /* link error monitor */
+#define SWAP_SMT_P_LEM "ssccccll"
+/*
+ * units of lem_cutoff,lem_alarm,lem_estimate : 10**-x
+ */
+struct smt_p_lem {
+ struct smt_para para ; /* generic parameter header */
+ u_short lem_mib_index ; /* MIB index */
+ u_short lem_phy_index ; /* 1 .. n */
+ u_char lem_pad2 ; /* be nice and make it even . */
+ u_char lem_cutoff ; /* 0x4 .. 0xf, default 0x7 */
+ u_char lem_alarm ; /* 0x4 .. 0xf, default 0x8 */
+ u_char lem_estimate ; /* 0x0 .. 0xff */
+ u_int lem_reject_ct ; /* 0x00000000 .. 0xffffffff */
+ u_int lem_ct ; /* 0x00000000 .. 0xffffffff */
+} ;
+
+/*
+ * P0B : MAC frame counters
+ */
+#define SMT_P_MAC_COUNTER 0x000b /* MAC frame counters */
+#define SWAP_SMT_P_MAC_COUNTER "ssll"
+
+struct smt_p_mac_counter {
+ struct smt_para para ; /* generic parameter header */
+ u_short mc_mib_index ; /* MIB index */
+ u_short mc_index ; /* mac index */
+ u_int mc_receive_ct ; /* receive counter */
+ u_int mc_transmit_ct ; /* transmit counter */
+} ;
+
+/*
+ * P0C : MAC frame not copied counter
+ */
+#define SMT_P_MAC_FNC 0x000c /* MAC frame not copied counter */
+#define SWAP_SMT_P_MAC_FNC "ssl"
+
+struct smt_p_mac_fnc {
+ struct smt_para para ; /* generic parameter header */
+ u_short nc_mib_index ; /* MIB index */
+ u_short nc_index ; /* mac index */
+ u_int nc_counter ; /* not copied counter */
+} ;
+
+
+/*
+ * P0D : MAC priority values
+ */
+#define SMT_P_PRIORITY 0x000d /* MAC priority values */
+#define SWAP_SMT_P_PRIORITY "ssl"
+
+struct smt_p_priority {
+ struct smt_para para ; /* generic parameter header */
+ u_short pr_mib_index ; /* MIB index */
+ u_short pr_index ; /* mac index */
+ u_int pr_priority[7] ; /* priority values */
+} ;
+
+/*
+ * P0E : PHY elasticity buffer status
+ */
+#define SMT_P_EB 0x000e /* PHY EB status */
+#define SWAP_SMT_P_EB "ssl"
+
+struct smt_p_eb {
+ struct smt_para para ; /* generic parameter header */
+ u_short eb_mib_index ; /* MIB index */
+ u_short eb_index ; /* phy index */
+ u_int eb_error_ct ; /* # of eb overflows */
+} ;
+
+/*
+ * P0F : manufacturer field
+ */
+#define SMT_P_MANUFACTURER 0x000f /* manufacturer field */
+#define SWAP_SMT_P_MANUFACTURER ""
+
+struct smp_p_manufacturer {
+ struct smt_para para ; /* generic parameter header */
+ u_char mf_data[32] ; /* OUI + arbitrary data */
+} ;
+
+/*
+ * P10 : user field
+ */
+#define SMT_P_USER 0x0010 /* manufacturer field */
+#define SWAP_SMT_P_USER ""
+
+struct smp_p_user {
+ struct smt_para para ; /* generic parameter header */
+ u_char us_data[32] ; /* arbitrary data */
+} ;
+
+
+
+/*
+ * P11 : echo data
+ */
+#define SMT_P_ECHODATA 0x0011 /* echo data */
+#define SWAP_SMT_P_ECHODATA ""
+
+struct smt_p_echo {
+ struct smt_para para ; /* generic parameter header */
+ u_char ec_data[SMT_MAX_ECHO_LEN-4] ; /* echo data */
+} ;
+
+/*
+ * P12 : reason code
+ */
+#define SMT_P_REASON 0x0012 /* reason code */
+#define SWAP_SMT_P_REASON "l"
+
+struct smt_p_reason {
+ struct smt_para para ; /* generic parameter header */
+ u_int rdf_reason ; /* CLASS/VERSION */
+} ;
+#define SMT_RDF_CLASS 0x00000001 /* class not supported */
+#define SMT_RDF_VERSION 0x00000002 /* version not supported */
+#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
+#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
+#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
+#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
+#define SMT_RDF_RANGE 0x8 /* out of range */
+#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
+#define SMT_RDF_LENGTH 0x0a /* length error */
+#define SMT_RDF_TOOLONG 0x0b /* length error */
+#define SMT_RDF_SBA 0x0d /* SBA denied */
+
+/*
+ * P13 : refused frame beginning
+ */
+#define SMT_P_REFUSED 0x0013 /* refused frame beginning */
+#define SWAP_SMT_P_REFUSED "l"
+
+struct smt_p_refused {
+ struct smt_para para ; /* generic parameter header */
+ u_int ref_fc ; /* 3 bytes 0 + FC */
+ struct smt_header ref_header ; /* refused header */
+} ;
+
+/*
+ * P14 : supported SMT versions
+ */
+#define SMT_P_VERSION 0x0014 /* SMT supported versions */
+#define SWAP_SMT_P_VERSION "sccss"
+
+struct smt_p_version {
+ struct smt_para para ; /* generic parameter header */
+ u_short v_pad ;
+ u_char v_n ; /* 1 .. 0xff, #versions */
+ u_char v_index ; /* 1 .. 0xff, index of op. v. */
+ u_short v_version[1] ; /* list of min. 1 version */
+ u_short v_pad2 ; /* pad if necessary */
+} ;
+
+/*
+ * P15 : Resource Type
+ */
+#define SWAP_SMT_P0015 "l"
+
+struct smt_p_0015 {
+ struct smt_para para ; /* generic parameter header */
+ u_int res_type ; /* recsource type */
+} ;
+
+#define SYNC_BW 0x00000001L /* Synchronous Bandwidth */
+
+/*
+ * P16 : SBA Command
+ */
+#define SWAP_SMT_P0016 "l"
+
+struct smt_p_0016 {
+ struct smt_para para ; /* generic parameter header */
+ u_int sba_cmd ; /* command for the SBA */
+} ;
+
+#define REQUEST_ALLOCATION 0x1 /* req allocation of sync bandwidth */
+#define REPORT_ALLOCATION 0x2 /* rep of sync bandwidth allocation */
+#define CHANGE_ALLOCATION 0x3 /* forces a station using sync band-*/
+ /* width to change its current allo-*/
+ /* cation */
+
+/*
+ * P17 : SBA Payload Request
+ */
+#define SWAP_SMT_P0017 "l"
+
+struct smt_p_0017 {
+ struct smt_para para ; /* generic parameter header */
+ int sba_pl_req ; /* total sync bandwidth measured in */
+} ; /* bytes per 125 us */
+
+/*
+ * P18 : SBA Overhead Request
+ */
+#define SWAP_SMT_P0018 "l"
+
+struct smt_p_0018 {
+ struct smt_para para ; /* generic parameter header */
+ int sba_ov_req ; /* total sync bandwidth req for overhead*/
+} ; /* measuered in bytes per T_Neg */
+
+/*
+ * P19 : SBA Allocation Address
+ */
+#define SWAP_SMT_P0019 "s6"
+
+struct smt_p_0019 {
+ struct smt_para para ; /* generic parameter header */
+ u_short sba_pad ;
+ struct fddi_addr alloc_addr ; /* Allocation Address */
+} ;
+
+/*
+ * P1A : SBA Category
+ */
+#define SWAP_SMT_P001A "l"
+
+struct smt_p_001a {
+ struct smt_para para ; /* generic parameter header */
+ u_int category ; /* Allocator defined classification */
+} ;
+
+/*
+ * P1B : Maximum T_Neg
+ */
+#define SWAP_SMT_P001B "l"
+
+struct smt_p_001b {
+ struct smt_para para ; /* generic parameter header */
+ u_int max_t_neg ; /* longest T_NEG for the sync service*/
+} ;
+
+/*
+ * P1C : Minimum SBA Segment Size
+ */
+#define SWAP_SMT_P001C "l"
+
+struct smt_p_001c {
+ struct smt_para para ; /* generic parameter header */
+ u_int min_seg_siz ; /* smallest number of bytes per frame*/
+} ;
+
+/*
+ * P1D : SBA Allocatable
+ */
+#define SWAP_SMT_P001D "l"
+
+struct smt_p_001d {
+ struct smt_para para ; /* generic parameter header */
+ u_int allocatable ; /* total sync bw available for alloc */
+} ;
+
+/*
+ * P20 0B : frame status capabilities
+ * NOTE: not in swap table, is used by smt.c AND PMF table
+ */
+#define SMT_P_FSC 0x200b
+/* #define SWAP_SMT_P_FSC "ssss" */
+
+struct smt_p_fsc {
+ struct smt_para para ; /* generic parameter header */
+ u_short fsc_pad0 ;
+ u_short fsc_mac_index ; /* mac index 1 .. ff */
+ u_short fsc_pad1 ;
+ u_short fsc_value ; /* FSC_TYPE[0-2] */
+} ;
+
+#define FSC_TYPE0 0 /* "normal" node (A/C handling) */
+#define FSC_TYPE1 1 /* Special A/C indicator forwarding */
+#define FSC_TYPE2 2 /* Special A/C indicator forwarding */
+
+/*
+ * P00 21 : user defined authoriziation (see pmf.c)
+ */
+#define SMT_P_AUTHOR 0x0021
+
+/*
+ * notification parameters
+ */
+#define SWAP_SMT_P1048 "ll"
+struct smt_p_1048 {
+ u_int p1048_flag ;
+ u_int p1048_cf_state ;
+} ;
+
+/*
+ * NOTE: all 2xxx 3xxx and 4xxx must include the INDEX in the swap string,
+ * even so the INDEX is NOT part of the struct.
+ * INDEX is already swapped in pmf.c, format in string is '4'
+ */
+#define SWAP_SMT_P208C "4lss66"
+struct smt_p_208c {
+ u_int p208c_flag ;
+ u_short p208c_pad ;
+ u_short p208c_dupcondition ;
+ struct fddi_addr p208c_fddilong ;
+ struct fddi_addr p208c_fddiunalong ;
+} ;
+
+#define SWAP_SMT_P208D "4lllll"
+struct smt_p_208d {
+ u_int p208d_flag ;
+ u_int p208d_frame_ct ;
+ u_int p208d_error_ct ;
+ u_int p208d_lost_ct ;
+ u_int p208d_ratio ;
+} ;
+
+#define SWAP_SMT_P208E "4llll"
+struct smt_p_208e {
+ u_int p208e_flag ;
+ u_int p208e_not_copied ;
+ u_int p208e_copied ;
+ u_int p208e_not_copied_ratio ;
+} ;
+
+#define SWAP_SMT_P208F "4ll6666s6"
+
+struct smt_p_208f {
+ u_int p208f_multiple ;
+ u_int p208f_nacondition ;
+ struct fddi_addr p208f_old_una ;
+ struct fddi_addr p208f_new_una ;
+ struct fddi_addr p208f_old_dna ;
+ struct fddi_addr p208f_new_dna ;
+ u_short p208f_curren_path ;
+ struct fddi_addr p208f_smt_address ;
+} ;
+
+#define SWAP_SMT_P2090 "4lssl"
+
+struct smt_p_2090 {
+ u_int p2090_multiple ;
+ u_short p2090_availablepaths ;
+ u_short p2090_currentpath ;
+ u_int p2090_requestedpaths ;
+} ;
+
+/*
+ * NOTE:
+ * special kludge for parameters 320b,320f,3210
+ * these parameters are part of RAF frames
+ * RAF frames are parsed in SBA.C and must be swapped
+ * PMF.C has special code to avoid double swapping
+ */
+#ifdef LITTLE_ENDIAN
+#define SBAPATHINDEX (0x01000000L)
+#else
+#define SBAPATHINDEX (0x01L)
+#endif
+
+#define SWAP_SMT_P320B "42s"
+
+struct smt_p_320b {
+ struct smt_para para ; /* generic parameter header */
+ u_int mib_index ;
+ u_short path_pad ;
+ u_short path_index ;
+} ;
+
+#define SWAP_SMT_P320F "4l"
+
+struct smt_p_320f {
+ struct smt_para para ; /* generic parameter header */
+ u_int mib_index ;
+ u_int mib_payload ;
+} ;
+
+#define SWAP_SMT_P3210 "4l"
+
+struct smt_p_3210 {
+ struct smt_para para ; /* generic parameter header */
+ u_int mib_index ;
+ u_int mib_overhead ;
+} ;
+
+#define SWAP_SMT_P4050 "4l1111ll"
+
+struct smt_p_4050 {
+ u_int p4050_flag ;
+ u_char p4050_pad ;
+ u_char p4050_cutoff ;
+ u_char p4050_alarm ;
+ u_char p4050_estimate ;
+ u_int p4050_reject_ct ;
+ u_int p4050_ct ;
+} ;
+
+#define SWAP_SMT_P4051 "4lssss"
+struct smt_p_4051 {
+ u_int p4051_multiple ;
+ u_short p4051_porttype ;
+ u_short p4051_connectstate ;
+ u_short p4051_pc_neighbor ;
+ u_short p4051_pc_withhold ;
+} ;
+
+#define SWAP_SMT_P4052 "4ll"
+struct smt_p_4052 {
+ u_int p4052_flag ;
+ u_int p4052_eberrorcount ;
+} ;
+
+#define SWAP_SMT_P4053 "4lsslss"
+
+struct smt_p_4053 {
+ u_int p4053_multiple ;
+ u_short p4053_availablepaths ;
+ u_short p4053_currentpath ;
+ u_int p4053_requestedpaths ;
+ u_short p4053_mytype ;
+ u_short p4053_neighbortype ;
+} ;
+
+
+#define SMT_P_SETCOUNT 0x1035
+#define SWAP_SMT_P_SETCOUNT "l8"
+
+struct smt_p_setcount {
+ struct smt_para para ; /* generic parameter header */
+ u_int count ;
+ u_char timestamp[8] ;
+} ;
+
+/*
+ * SMT FRAMES
+ */
+
+/*
+ * NIF : neighbor information frames
+ */
+struct smt_nif {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_una una ; /* UNA */
+ struct smt_p_sde sde ; /* station descriptor */
+ struct smt_p_state state ; /* station state */
+#ifdef SMT6_10
+ struct smt_p_fsc fsc ; /* frame status cap. */
+#endif
+} ;
+
+/*
+ * SIF : station information frames
+ */
+struct smt_sif_config {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_timestamp ts ; /* time stamp */
+ struct smt_p_sde sde ; /* station descriptor */
+ struct smt_p_version version ; /* supported versions */
+ struct smt_p_state state ; /* station state */
+ struct smt_p_policy policy ; /* station policy */
+ struct smt_p_latency latency ; /* path latency */
+ struct smt_p_neighbor neighbor ; /* neighbors, we have only one*/
+#ifdef OPT_PMF
+ struct smt_p_setcount setcount ; /* Set Count mandatory */
+#endif
+ /* WARNING : path MUST BE LAST FIELD !!! (see smt.c:smt_fill_path) */
+ struct smt_p_path path ; /* path descriptor */
+} ;
+#define SIZEOF_SMT_SIF_CONFIG (sizeof(struct smt_sif_config)- \
+ sizeof(struct smt_p_path))
+
+struct smt_sif_operation {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_timestamp ts ; /* time stamp */
+ struct smt_p_mac_status status ; /* mac status */
+ struct smt_p_mac_counter mc ; /* MAC counter */
+ struct smt_p_mac_fnc fnc ; /* MAC frame not copied */
+ struct smp_p_manufacturer man ; /* manufacturer field */
+ struct smp_p_user user ; /* user field */
+#ifdef OPT_PMF
+ struct smt_p_setcount setcount ; /* Set Count mandatory */
+#endif
+ /* must be last */
+ struct smt_p_lem lem[1] ; /* phy lem status */
+} ;
+#define SIZEOF_SMT_SIF_OPERATION (sizeof(struct smt_sif_operation)- \
+ sizeof(struct smt_p_lem))
+
+/*
+ * ECF : echo frame
+ */
+struct smt_ecf {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_echo ec_echo ; /* echo parameter */
+} ;
+#define SMT_ECF_LEN (sizeof(struct smt_header)+sizeof(struct smt_para))
+
+/*
+ * RDF : request denied frame
+ */
+struct smt_rdf {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_reason reason ; /* reason code */
+ struct smt_p_version version ; /* supported versions */
+ struct smt_p_refused refused ; /* refused frame fragment */
+} ;
+
+/*
+ * SBA Request Allocation Response Frame
+ */
+struct smt_sba_alc_res {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_0015 s_type ; /* resource type */
+ struct smt_p_0016 cmd ; /* SBA command */
+ struct smt_p_reason reason ; /* reason code */
+ struct smt_p_320b path ; /* path type */
+ struct smt_p_320f payload ; /* current SBA payload */
+ struct smt_p_3210 overhead ; /* current SBA overhead */
+ struct smt_p_0019 a_addr ; /* Allocation Address */
+ struct smt_p_001a cat ; /* Category - from the request */
+ struct smt_p_001d alloc ; /* SBA Allocatable */
+} ;
+
+/*
+ * SBA Request Allocation Request Frame
+ */
+struct smt_sba_alc_req {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_0015 s_type ; /* resource type */
+ struct smt_p_0016 cmd ; /* SBA command */
+ struct smt_p_320b path ; /* path type */
+ struct smt_p_0017 pl_req ; /* requested payload */
+ struct smt_p_0018 ov_req ; /* requested SBA overhead */
+ struct smt_p_320f payload ; /* current SBA payload */
+ struct smt_p_3210 overhead ; /* current SBA overhead */
+ struct smt_p_0019 a_addr ; /* Allocation Address */
+ struct smt_p_001a cat ; /* Category - from the request */
+ struct smt_p_001b tneg ; /* max T-NEG */
+ struct smt_p_001c segm ; /* minimum segment size */
+} ;
+
+/*
+ * SBA Change Allocation Request Frame
+ */
+struct smt_sba_chg {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_0015 s_type ; /* resource type */
+ struct smt_p_0016 cmd ; /* SBA command */
+ struct smt_p_320b path ; /* path type */
+ struct smt_p_320f payload ; /* current SBA payload */
+ struct smt_p_3210 overhead ; /* current SBA overhead */
+ struct smt_p_001a cat ; /* Category - from the request */
+} ;
+
+/*
+ * SBA Report Allocation Request Frame
+ */
+struct smt_sba_rep_req {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_0015 s_type ; /* resource type */
+ struct smt_p_0016 cmd ; /* SBA command */
+} ;
+
+/*
+ * SBA Report Allocation Response Frame
+ */
+struct smt_sba_rep_res {
+ struct smt_header smt ; /* generic header */
+ struct smt_p_0015 s_type ; /* resource type */
+ struct smt_p_0016 cmd ; /* SBA command */
+ struct smt_p_320b path ; /* path type */
+ struct smt_p_320f payload ; /* current SBA payload */
+ struct smt_p_3210 overhead ; /* current SBA overhead */
+} ;
+
+/*
+ * actions
+ */
+#define SMT_STATION_ACTION 1
+#define SMT_STATION_ACTION_CONNECT 0
+#define SMT_STATION_ACTION_DISCONNECT 1
+#define SMT_STATION_ACTION_PATHTEST 2
+#define SMT_STATION_ACTION_SELFTEST 3
+#define SMT_STATION_ACTION_DISABLE_A 4
+#define SMT_STATION_ACTION_DISABLE_B 5
+#define SMT_STATION_ACTION_DISABLE_M 6
+
+#define SMT_PORT_ACTION 2
+#define SMT_PORT_ACTION_MAINT 0
+#define SMT_PORT_ACTION_ENABLE 1
+#define SMT_PORT_ACTION_DISABLE 2
+#define SMT_PORT_ACTION_START 3
+#define SMT_PORT_ACTION_STOP 4
+
+#endif /* _SMT_ */
diff --git a/drivers/net/fddi/skfp/h/smt_p.h b/drivers/net/fddi/skfp/h/smt_p.h
new file mode 100644
index 000000000..99f9be955
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smt_p.h
@@ -0,0 +1,326 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * defines for all SMT attributes
+ */
+
+/*
+ * this boring file was produced by perl
+ * thanks Larry !
+ */
+#define SMT_P0012 0x0012
+
+#define SMT_P0015 0x0015
+#define SMT_P0016 0x0016
+#define SMT_P0017 0x0017
+#define SMT_P0018 0x0018
+#define SMT_P0019 0x0019
+
+#define SMT_P001A 0x001a
+#define SMT_P001B 0x001b
+#define SMT_P001C 0x001c
+#define SMT_P001D 0x001d
+
+#define SMT_P100A 0x100a
+#define SMT_P100B 0x100b
+#define SMT_P100C 0x100c
+#define SMT_P100D 0x100d
+#define SMT_P100E 0x100e
+#define SMT_P100F 0x100f
+#define SMT_P1010 0x1010
+#define SMT_P1011 0x1011
+#define SMT_P1012 0x1012
+#define SMT_P1013 0x1013
+#define SMT_P1014 0x1014
+#define SMT_P1015 0x1015
+#define SMT_P1016 0x1016
+#define SMT_P1017 0x1017
+#define SMT_P1018 0x1018
+#define SMT_P1019 0x1019
+#define SMT_P101A 0x101a
+#define SMT_P101B 0x101b
+#define SMT_P101C 0x101c
+#define SMT_P101D 0x101d
+#define SMT_P101E 0x101e
+#define SMT_P101F 0x101f
+#define SMT_P1020 0x1020
+#define SMT_P1021 0x1021
+#define SMT_P1022 0x1022
+#define SMT_P1023 0x1023
+#define SMT_P1024 0x1024
+#define SMT_P1025 0x1025
+#define SMT_P1026 0x1026
+#define SMT_P1027 0x1027
+#define SMT_P1028 0x1028
+#define SMT_P1029 0x1029
+#define SMT_P102A 0x102a
+#define SMT_P102B 0x102b
+#define SMT_P102C 0x102c
+#define SMT_P102D 0x102d
+#define SMT_P102E 0x102e
+#define SMT_P102F 0x102f
+#define SMT_P1030 0x1030
+#define SMT_P1031 0x1031
+#define SMT_P1032 0x1032
+#define SMT_P1033 0x1033
+#define SMT_P1034 0x1034
+#define SMT_P1035 0x1035
+#define SMT_P1036 0x1036
+#define SMT_P1037 0x1037
+#define SMT_P1038 0x1038
+#define SMT_P1039 0x1039
+#define SMT_P103A 0x103a
+#define SMT_P103B 0x103b
+#define SMT_P103C 0x103c
+#define SMT_P103D 0x103d
+#define SMT_P103E 0x103e
+#define SMT_P103F 0x103f
+#define SMT_P1040 0x1040
+#define SMT_P1041 0x1041
+#define SMT_P1042 0x1042
+#define SMT_P1043 0x1043
+#define SMT_P1044 0x1044
+#define SMT_P1045 0x1045
+#define SMT_P1046 0x1046
+#define SMT_P1047 0x1047
+#define SMT_P1048 0x1048
+#define SMT_P1049 0x1049
+#define SMT_P104A 0x104a
+#define SMT_P104B 0x104b
+#define SMT_P104C 0x104c
+#define SMT_P104D 0x104d
+#define SMT_P104E 0x104e
+#define SMT_P104F 0x104f
+#define SMT_P1050 0x1050
+#define SMT_P1051 0x1051
+#define SMT_P1052 0x1052
+#define SMT_P1053 0x1053
+#define SMT_P1054 0x1054
+
+#define SMT_P10F0 0x10f0
+#define SMT_P10F1 0x10f1
+#ifdef ESS
+#define SMT_P10F2 0x10f2
+#define SMT_P10F3 0x10f3
+#define SMT_P10F4 0x10f4
+#define SMT_P10F5 0x10f5
+#define SMT_P10F6 0x10f6
+#define SMT_P10F7 0x10f7
+#endif
+#ifdef SBA
+#define SMT_P10F8 0x10f8
+#define SMT_P10F9 0x10f9
+#endif
+
+#define SMT_P200A 0x200a
+#define SMT_P200B 0x200b
+#define SMT_P200C 0x200c
+#define SMT_P200D 0x200d
+#define SMT_P200E 0x200e
+#define SMT_P200F 0x200f
+#define SMT_P2010 0x2010
+#define SMT_P2011 0x2011
+#define SMT_P2012 0x2012
+#define SMT_P2013 0x2013
+#define SMT_P2014 0x2014
+#define SMT_P2015 0x2015
+#define SMT_P2016 0x2016
+#define SMT_P2017 0x2017
+#define SMT_P2018 0x2018
+#define SMT_P2019 0x2019
+#define SMT_P201A 0x201a
+#define SMT_P201B 0x201b
+#define SMT_P201C 0x201c
+#define SMT_P201D 0x201d
+#define SMT_P201E 0x201e
+#define SMT_P201F 0x201f
+#define SMT_P2020 0x2020
+#define SMT_P2021 0x2021
+#define SMT_P2022 0x2022
+#define SMT_P2023 0x2023
+#define SMT_P2024 0x2024
+#define SMT_P2025 0x2025
+#define SMT_P2026 0x2026
+#define SMT_P2027 0x2027
+#define SMT_P2028 0x2028
+#define SMT_P2029 0x2029
+#define SMT_P202A 0x202a
+#define SMT_P202B 0x202b
+#define SMT_P202C 0x202c
+#define SMT_P202D 0x202d
+#define SMT_P202E 0x202e
+#define SMT_P202F 0x202f
+#define SMT_P2030 0x2030
+#define SMT_P2031 0x2031
+#define SMT_P2032 0x2032
+#define SMT_P2033 0x2033
+#define SMT_P2034 0x2034
+#define SMT_P2035 0x2035
+#define SMT_P2036 0x2036
+#define SMT_P2037 0x2037
+#define SMT_P2038 0x2038
+#define SMT_P2039 0x2039
+#define SMT_P203A 0x203a
+#define SMT_P203B 0x203b
+#define SMT_P203C 0x203c
+#define SMT_P203D 0x203d
+#define SMT_P203E 0x203e
+#define SMT_P203F 0x203f
+#define SMT_P2040 0x2040
+#define SMT_P2041 0x2041
+#define SMT_P2042 0x2042
+#define SMT_P2043 0x2043
+#define SMT_P2044 0x2044
+#define SMT_P2045 0x2045
+#define SMT_P2046 0x2046
+#define SMT_P2047 0x2047
+#define SMT_P2048 0x2048
+#define SMT_P2049 0x2049
+#define SMT_P204A 0x204a
+#define SMT_P204B 0x204b
+#define SMT_P204C 0x204c
+#define SMT_P204D 0x204d
+#define SMT_P204E 0x204e
+#define SMT_P204F 0x204f
+#define SMT_P2050 0x2050
+#define SMT_P2051 0x2051
+#define SMT_P2052 0x2052
+#define SMT_P2053 0x2053
+#define SMT_P2054 0x2054
+#define SMT_P2055 0x2055
+#define SMT_P2056 0x2056
+#define SMT_P2057 0x2057
+#define SMT_P2058 0x2058
+#define SMT_P2059 0x2059
+#define SMT_P205A 0x205a
+#define SMT_P205B 0x205b
+#define SMT_P205C 0x205c
+#define SMT_P205D 0x205d
+#define SMT_P205E 0x205e
+#define SMT_P205F 0x205f
+#define SMT_P2060 0x2060
+#define SMT_P2061 0x2061
+#define SMT_P2062 0x2062
+#define SMT_P2063 0x2063
+#define SMT_P2064 0x2064
+#define SMT_P2065 0x2065
+#define SMT_P2066 0x2066
+#define SMT_P2067 0x2067
+#define SMT_P2068 0x2068
+#define SMT_P2069 0x2069
+#define SMT_P206A 0x206a
+#define SMT_P206B 0x206b
+#define SMT_P206C 0x206c
+#define SMT_P206D 0x206d
+#define SMT_P206E 0x206e
+#define SMT_P206F 0x206f
+#define SMT_P2070 0x2070
+#define SMT_P2071 0x2071
+#define SMT_P2072 0x2072
+#define SMT_P2073 0x2073
+#define SMT_P2074 0x2074
+#define SMT_P2075 0x2075
+#define SMT_P2076 0x2076
+
+#define SMT_P208C 0x208c
+#define SMT_P208D 0x208d
+#define SMT_P208E 0x208e
+#define SMT_P208F 0x208f
+#define SMT_P2090 0x2090
+
+#define SMT_P20F0 0x20F0
+#define SMT_P20F1 0x20F1
+
+#define SMT_P320A 0x320a
+#define SMT_P320B 0x320b
+#define SMT_P320C 0x320c
+#define SMT_P320D 0x320d
+#define SMT_P320E 0x320e
+#define SMT_P320F 0x320f
+#define SMT_P3210 0x3210
+#define SMT_P3211 0x3211
+#define SMT_P3212 0x3212
+#define SMT_P3213 0x3213
+#define SMT_P3214 0x3214
+#define SMT_P3215 0x3215
+#define SMT_P3216 0x3216
+#define SMT_P3217 0x3217
+
+#define SMT_P400A 0x400a
+#define SMT_P400B 0x400b
+#define SMT_P400C 0x400c
+#define SMT_P400D 0x400d
+#define SMT_P400E 0x400e
+#define SMT_P400F 0x400f
+#define SMT_P4010 0x4010
+#define SMT_P4011 0x4011
+#define SMT_P4012 0x4012
+#define SMT_P4013 0x4013
+#define SMT_P4014 0x4014
+#define SMT_P4015 0x4015
+#define SMT_P4016 0x4016
+#define SMT_P4017 0x4017
+#define SMT_P4018 0x4018
+#define SMT_P4019 0x4019
+#define SMT_P401A 0x401a
+#define SMT_P401B 0x401b
+#define SMT_P401C 0x401c
+#define SMT_P401D 0x401d
+#define SMT_P401E 0x401e
+#define SMT_P401F 0x401f
+#define SMT_P4020 0x4020
+#define SMT_P4021 0x4021
+#define SMT_P4022 0x4022
+#define SMT_P4023 0x4023
+#define SMT_P4024 0x4024
+#define SMT_P4025 0x4025
+#define SMT_P4026 0x4026
+#define SMT_P4027 0x4027
+#define SMT_P4028 0x4028
+#define SMT_P4029 0x4029
+#define SMT_P402A 0x402a
+#define SMT_P402B 0x402b
+#define SMT_P402C 0x402c
+#define SMT_P402D 0x402d
+#define SMT_P402E 0x402e
+#define SMT_P402F 0x402f
+#define SMT_P4030 0x4030
+#define SMT_P4031 0x4031
+#define SMT_P4032 0x4032
+#define SMT_P4033 0x4033
+#define SMT_P4034 0x4034
+#define SMT_P4035 0x4035
+#define SMT_P4036 0x4036
+#define SMT_P4037 0x4037
+#define SMT_P4038 0x4038
+#define SMT_P4039 0x4039
+#define SMT_P403A 0x403a
+#define SMT_P403B 0x403b
+#define SMT_P403C 0x403c
+#define SMT_P403D 0x403d
+#define SMT_P403E 0x403e
+#define SMT_P403F 0x403f
+#define SMT_P4040 0x4040
+#define SMT_P4041 0x4041
+#define SMT_P4042 0x4042
+#define SMT_P4043 0x4043
+#define SMT_P4044 0x4044
+#define SMT_P4045 0x4045
+#define SMT_P4046 0x4046
+
+#define SMT_P4050 0x4050
+#define SMT_P4051 0x4051
+#define SMT_P4052 0x4052
+#define SMT_P4053 0x4053
diff --git a/drivers/net/fddi/skfp/h/smtstate.h b/drivers/net/fddi/skfp/h/smtstate.h
new file mode 100644
index 000000000..62fe69507
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smtstate.h
@@ -0,0 +1,106 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SKFP_H_SMTSTATE_H_
+#define _SKFP_H_SMTSTATE_H_
+
+/*
+ * SMT state definitions
+ */
+
+#ifndef KERNEL
+/*
+ * PCM states
+ */
+#define PC0_OFF 0
+#define PC1_BREAK 1
+#define PC2_TRACE 2
+#define PC3_CONNECT 3
+#define PC4_NEXT 4
+#define PC5_SIGNAL 5
+#define PC6_JOIN 6
+#define PC7_VERIFY 7
+#define PC8_ACTIVE 8
+#define PC9_MAINT 9
+
+/*
+ * PCM modes
+ */
+#define PM_NONE 0
+#define PM_PEER 1
+#define PM_TREE 2
+
+/*
+ * PCM type
+ */
+#define TA 0
+#define TB 1
+#define TS 2
+#define TM 3
+#define TNONE 4
+
+/*
+ * CFM states
+ */
+#define SC0_ISOLATED 0 /* isolated */
+#define SC1_WRAP_A 5 /* wrap A */
+#define SC2_WRAP_B 6 /* wrap B */
+#define SC4_THRU_A 12 /* through A */
+#define SC5_THRU_B 7 /* through B (SMt 6.2) */
+#define SC7_WRAP_S 8 /* SAS */
+
+/*
+ * ECM states
+ */
+#define EC0_OUT 0
+#define EC1_IN 1
+#define EC2_TRACE 2
+#define EC3_LEAVE 3
+#define EC4_PATH_TEST 4
+#define EC5_INSERT 5
+#define EC6_CHECK 6
+#define EC7_DEINSERT 7
+
+/*
+ * RMT states
+ */
+#define RM0_ISOLATED 0
+#define RM1_NON_OP 1 /* not operational */
+#define RM2_RING_OP 2 /* ring operational */
+#define RM3_DETECT 3 /* detect dupl addresses */
+#define RM4_NON_OP_DUP 4 /* dupl. addr detected */
+#define RM5_RING_OP_DUP 5 /* ring oper. with dupl. addr */
+#define RM6_DIRECTED 6 /* sending directed beacons */
+#define RM7_TRACE 7 /* trace initiated */
+#endif
+
+struct pcm_state {
+ unsigned char pcm_type ; /* TA TB TS TM */
+ unsigned char pcm_state ; /* state PC[0-9]_* */
+ unsigned char pcm_mode ; /* PM_{NONE,PEER,TREE} */
+ unsigned char pcm_neighbor ; /* TA TB TS TM */
+ unsigned char pcm_bsf ; /* flag bs : TRUE/FALSE */
+ unsigned char pcm_lsf ; /* flag ls : TRUE/FALSE */
+ unsigned char pcm_lct_fail ; /* counter lct_fail */
+ unsigned char pcm_ls_rx ; /* rx line state */
+ short pcm_r_val ; /* signaling bits */
+ short pcm_t_val ; /* signaling bits */
+} ;
+
+struct smt_state {
+ struct pcm_state pcm_state[NUMPHYS] ; /* port A & port B */
+} ;
+
+#endif
+
diff --git a/drivers/net/fddi/skfp/h/supern_2.h b/drivers/net/fddi/skfp/h/supern_2.h
new file mode 100644
index 000000000..4ee360d2d
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/supern_2.h
@@ -0,0 +1,1059 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ defines for AMD Supernet II chip set
+ the chips are referred to as
+ FPLUS Formac Plus
+ PLC Physical Layer
+
+ added defines for AMD Supernet III chip set
+ added comments on differences between Supernet II and Supernet III
+ added defines for the Motorola ELM (MOT_ELM)
+*/
+
+#ifndef _SUPERNET_
+#define _SUPERNET_
+
+/*
+ * Define Supernet 3 when used
+ */
+#ifdef PCI
+#ifndef SUPERNET_3
+#define SUPERNET_3
+#endif
+#define TAG
+#endif
+
+#define MB 0xff
+#define MW 0xffff
+#define MD 0xffffffff
+
+/*
+ * FORMAC frame status (rx_msext)
+ */
+#define FS_EI (1<<2)
+#define FS_AI (1<<1)
+#define FS_CI (1<<0)
+
+#define FS_MSVALID (1<<15) /* end of queue */
+#define FS_MSRABT (1<<14) /* frame was aborted during reception*/
+#define FS_SSRCRTG (1<<12) /* if SA has set MSB (source-routing)*/
+#define FS_SEAC2 (FS_EI<<9) /* error indicator */
+#define FS_SEAC1 (FS_AI<<9) /* address indicator */
+#define FS_SEAC0 (FS_CI<<9) /* copy indicator */
+#define FS_SFRMERR (1<<8) /* error detected (CRC or length) */
+#define FS_SADRRG (1<<7) /* address recognized */
+#define FS_SFRMTY2 (1<<6) /* frame-class bit */
+#define FS_SFRMTY1 (1<<5) /* frame-type bit (impementor) */
+#define FS_SFRMTY0 (1<<4) /* frame-type bit (LLC) */
+#define FS_ERFBB1 (1<<1) /* byte offset (depends on LSB bit) */
+#define FS_ERFBB0 (1<<0) /* - " - */
+
+/*
+ * status frame type
+ */
+#define FRM_SMT (0) /* asynchr. frames */
+#define FRM_LLCA (1)
+#define FRM_IMPA (2)
+#define FRM_MAC (4) /* synchr. frames */
+#define FRM_LLCS (5)
+#define FRM_IMPS (6)
+
+/*
+ * bits in rx_descr.i (receive frame status word)
+ */
+#define RX_MSVALID ((long)1<<31) /* memory status valid */
+#define RX_MSRABT ((long)1<<30) /* memory status receive abort */
+#define RX_FS_E ((long)FS_SEAC2<<16) /* error indicator */
+#define RX_FS_A ((long)FS_SEAC1<<16) /* address indicator */
+#define RX_FS_C ((long)FS_SEAC0<<16) /* copy indicator */
+#define RX_FS_CRC ((long)FS_SFRMERR<<16)/* error detected */
+#define RX_FS_ADDRESS ((long)FS_SADRRG<<16) /* address recognized */
+#define RX_FS_MAC ((long)FS_SFRMTY2<<16)/* MAC frame */
+#define RX_FS_SMT ((long)0<<16) /* SMT frame */
+#define RX_FS_IMPL ((long)FS_SFRMTY1<<16)/* implementer frame */
+#define RX_FS_LLC ((long)FS_SFRMTY0<<16)/* LLC frame */
+
+/*
+ * receive frame descriptor
+ */
+union rx_descr {
+ struct {
+#ifdef LITTLE_ENDIAN
+ unsigned int rx_length :16 ; /* frame length lower/upper byte */
+ unsigned int rx_erfbb :2 ; /* received frame byte boundary */
+ unsigned int rx_reserv2:2 ; /* reserved */
+ unsigned int rx_sfrmty :3 ; /* frame type bits */
+ unsigned int rx_sadrrg :1 ; /* DA == MA or broad-/multicast */
+ unsigned int rx_sfrmerr:1 ; /* received frame not valid */
+ unsigned int rx_seac0 :1 ; /* frame-copied C-indicator */
+ unsigned int rx_seac1 :1 ; /* address-match A-indicator */
+ unsigned int rx_seac2 :1 ; /* frame-error E-indicator */
+ unsigned int rx_ssrcrtg:1 ; /* == 1 SA has MSB set */
+ unsigned int rx_reserv1:1 ; /* reserved */
+ unsigned int rx_msrabt :1 ; /* memory status receive abort */
+ unsigned int rx_msvalid:1 ; /* memory status valid */
+#else
+ unsigned int rx_msvalid:1 ; /* memory status valid */
+ unsigned int rx_msrabt :1 ; /* memory status receive abort */
+ unsigned int rx_reserv1:1 ; /* reserved */
+ unsigned int rx_ssrcrtg:1 ; /* == 1 SA has MSB set */
+ unsigned int rx_seac2 :1 ; /* frame-error E-indicator */
+ unsigned int rx_seac1 :1 ; /* address-match A-indicator */
+ unsigned int rx_seac0 :1 ; /* frame-copied C-indicator */
+ unsigned int rx_sfrmerr:1 ; /* received frame not valid */
+ unsigned int rx_sadrrg :1 ; /* DA == MA or broad-/multicast */
+ unsigned int rx_sfrmty :3 ; /* frame type bits */
+ unsigned int rx_erfbb :2 ; /* received frame byte boundary */
+ unsigned int rx_reserv2:2 ; /* reserved */
+ unsigned int rx_length :16 ; /* frame length lower/upper byte */
+#endif
+ } r ;
+ long i ;
+} ;
+
+/* defines for Receive Frame Descriptor access */
+#define RD_S_ERFBB 0x00030000L /* received frame byte boundary */
+#define RD_S_RES2 0x000c0000L /* reserved */
+#define RD_S_SFRMTY 0x00700000L /* frame type bits */
+#define RD_S_SADRRG 0x00800000L /* DA == MA or broad-/multicast */
+#define RD_S_SFRMERR 0x01000000L /* received frame not valid */
+#define RD_S_SEAC 0x0e000000L /* frame status indicators */
+#define RD_S_SEAC0 0x02000000L /* frame-copied case-indicator */
+#define RD_S_SEAC1 0x04000000L /* address-match A-indicator */
+#define RD_S_SEAC2 0x08000000L /* frame-error E-indicator */
+#define RD_S_SSRCRTG 0x10000000L /* == 1 SA has MSB set */
+#define RD_S_RES1 0x20000000L /* reserved */
+#define RD_S_MSRABT 0x40000000L /* memory status receive abort */
+#define RD_S_MSVALID 0x80000000L /* memory status valid */
+
+#define RD_STATUS 0xffff0000L
+#define RD_LENGTH 0x0000ffffL
+
+/* defines for Receive Frames Status Word values */
+/*RD_S_SFRMTY*/
+#define RD_FRM_SMT (unsigned long)(0<<20) /* asynchr. frames */
+#define RD_FRM_LLCA (unsigned long)(1<<20)
+#define RD_FRM_IMPA (unsigned long)(2<<20)
+#define RD_FRM_MAC (unsigned long)(4<<20) /* synchr. frames */
+#define RD_FRM_LLCS (unsigned long)(5<<20)
+#define RD_FRM_IMPS (unsigned long)(6<<20)
+
+#define TX_DESCRIPTOR 0x40000000L
+#define TX_OFFSET_3 0x18000000L
+
+#define TXP1 2
+
+/*
+ * transmit frame descriptor
+ */
+union tx_descr {
+ struct {
+#ifdef LITTLE_ENDIAN
+ unsigned int tx_length:16 ; /* frame length lower/upper byte */
+ unsigned int tx_res :8 ; /* reserved (bit 16..23) */
+ unsigned int tx_xmtabt:1 ; /* transmit abort */
+ unsigned int tx_nfcs :1 ; /* no frame check sequence */
+ unsigned int tx_xdone :1 ; /* give up token */
+ unsigned int tx_rpxm :2 ; /* byte offset */
+ unsigned int tx_pat1 :2 ; /* must be TXP1 */
+ unsigned int tx_more :1 ; /* more frame in chain */
+#else
+ unsigned int tx_more :1 ; /* more frame in chain */
+ unsigned int tx_pat1 :2 ; /* must be TXP1 */
+ unsigned int tx_rpxm :2 ; /* byte offset */
+ unsigned int tx_xdone :1 ; /* give up token */
+ unsigned int tx_nfcs :1 ; /* no frame check sequence */
+ unsigned int tx_xmtabt:1 ; /* transmit abort */
+ unsigned int tx_res :8 ; /* reserved (bit 16..23) */
+ unsigned int tx_length:16 ; /* frame length lower/upper byte */
+#endif
+ } t ;
+ long i ;
+} ;
+
+/* defines for Transmit Descriptor access */
+#define TD_C_MORE 0x80000000L /* more frame in chain */
+#define TD_C_DESCR 0x60000000L /* must be TXP1 */
+#define TD_C_TXFBB 0x18000000L /* byte offset */
+#define TD_C_XDONE 0x04000000L /* give up token */
+#define TD_C_NFCS 0x02000000L /* no frame check sequence */
+#define TD_C_XMTABT 0x01000000L /* transmit abort */
+
+#define TD_C_LNCNU 0x0000ff00L
+#define TD_C_LNCNL 0x000000ffL
+#define TD_C_LNCN 0x0000ffffL /* frame length lower/upper byte */
+
+/*
+ * transmit pointer
+ */
+union tx_pointer {
+ struct t {
+#ifdef LITTLE_ENDIAN
+ unsigned int tp_pointer:16 ; /* pointer to tx_descr (low/high) */
+ unsigned int tp_res :8 ; /* reserved (bit 16..23) */
+ unsigned int tp_pattern:8 ; /* fixed pattern (bit 24..31) */
+#else
+ unsigned int tp_pattern:8 ; /* fixed pattern (bit 24..31) */
+ unsigned int tp_res :8 ; /* reserved (bit 16..23) */
+ unsigned int tp_pointer:16 ; /* pointer to tx_descr (low/high) */
+#endif
+ } t ;
+ long i ;
+} ;
+
+/* defines for Nontag Mode Pointer access */
+#define TD_P_CNTRL 0xff000000L
+#define TD_P_RPXU 0x0000ff00L
+#define TD_P_RPXL 0x000000ffL
+#define TD_P_RPX 0x0000ffffL
+
+
+#define TX_PATTERN 0xa0
+#define TX_POINTER_END 0xa0000000L
+#define TX_INT_PATTERN 0xa0000000L
+
+struct tx_queue {
+ struct tx_queue *tq_next ;
+ u_short tq_pack_offset ; /* offset buffer memory */
+ u_char tq_pad[2] ;
+} ;
+
+/*
+ defines for FORMAC Plus (Am79C830)
+*/
+
+/*
+ * FORMAC+ read/write (r/w) registers
+ */
+#define FM_CMDREG1 0x00 /* write command reg 1 instruction */
+#define FM_CMDREG2 0x01 /* write command reg 2 instruction */
+#define FM_ST1U 0x00 /* read upper 16-bit of status reg 1 */
+#define FM_ST1L 0x01 /* read lower 16-bit of status reg 1 */
+#define FM_ST2U 0x02 /* read upper 16-bit of status reg 2 */
+#define FM_ST2L 0x03 /* read lower 16-bit of status reg 2 */
+#define FM_IMSK1U 0x04 /* r/w upper 16-bit of IMSK 1 */
+#define FM_IMSK1L 0x05 /* r/w lower 16-bit of IMSK 1 */
+#define FM_IMSK2U 0x06 /* r/w upper 16-bit of IMSK 2 */
+#define FM_IMSK2L 0x07 /* r/w lower 16-bit of IMSK 2 */
+#define FM_SAID 0x08 /* r/w short addr.-individual */
+#define FM_LAIM 0x09 /* r/w long addr.-ind. (MSW of LAID) */
+#define FM_LAIC 0x0a /* r/w long addr.-ind. (middle)*/
+#define FM_LAIL 0x0b /* r/w long addr.-ind. (LSW) */
+#define FM_SAGP 0x0c /* r/w short address-group */
+#define FM_LAGM 0x0d /* r/w long addr.-gr. (MSW of LAGP) */
+#define FM_LAGC 0x0e /* r/w long addr.-gr. (middle) */
+#define FM_LAGL 0x0f /* r/w long addr.-gr. (LSW) */
+#define FM_MDREG1 0x10 /* r/w 16-bit mode reg 1 */
+#define FM_STMCHN 0x11 /* read state-machine reg */
+#define FM_MIR1 0x12 /* read upper 16-bit of MAC Info Reg */
+#define FM_MIR0 0x13 /* read lower 16-bit of MAC Info Reg */
+#define FM_TMAX 0x14 /* r/w 16-bit TMAX reg */
+#define FM_TVX 0x15 /* write 8-bit TVX reg with NP7-0
+ read TVX on NP7-0, timer on NP15-8*/
+#define FM_TRT 0x16 /* r/w upper 16-bit of TRT timer */
+#define FM_THT 0x17 /* r/w upper 16-bit of THT timer */
+#define FM_TNEG 0x18 /* read upper 16-bit of TNEG (TTRT) */
+#define FM_TMRS 0x19 /* read lower 5-bit of TNEG,TRT,THT */
+ /* F E D C B A 9 8 7 6 5 4 3 2 1 0
+ x |-TNEG4-0| |-TRT4-0-| |-THT4-0-| (x-late count) */
+#define FM_TREQ0 0x1a /* r/w 16-bit TREQ0 reg (LSW of TRT) */
+#define FM_TREQ1 0x1b /* r/w 16-bit TREQ1 reg (MSW of TRT) */
+#define FM_PRI0 0x1c /* r/w priority r. for asyn.-queue 0 */
+#define FM_PRI1 0x1d /* r/w priority r. for asyn.-queue 1 */
+#define FM_PRI2 0x1e /* r/w priority r. for asyn.-queue 2 */
+#define FM_TSYNC 0x1f /* r/w 16-bit of the TSYNC register */
+#define FM_MDREG2 0x20 /* r/w 16-bit mode reg 2 */
+#define FM_FRMTHR 0x21 /* r/w the frame threshold register */
+#define FM_EACB 0x22 /* r/w end addr of claim/beacon area */
+#define FM_EARV 0x23 /* r/w end addr of receive queue */
+/* Supernet 3 */
+#define FM_EARV1 FM_EARV
+
+#define FM_EAS 0x24 /* r/w end addr of synchr. queue */
+#define FM_EAA0 0x25 /* r/w end addr of asyn. queue 0 */
+#define FM_EAA1 0x26 /* r/w end addr of asyn. queue 1 */
+#define FM_EAA2 0x27 /* r/w end addr of asyn. queue 2 */
+#define FM_SACL 0x28 /* r/w start addr of claim frame */
+#define FM_SABC 0x29 /* r/w start addr of beacon frame */
+#define FM_WPXSF 0x2a /* r/w the write ptr. for special fr.*/
+#define FM_RPXSF 0x2b /* r/w the read ptr. for special fr. */
+#define FM_RPR 0x2d /* r/w the read ptr. for receive qu. */
+#define FM_WPR 0x2e /* r/w the write ptr. for receive qu.*/
+#define FM_SWPR 0x2f /* r/w the shadow wr.-ptr. for rec.q.*/
+/* Supernet 3 */
+#define FM_RPR1 FM_RPR
+#define FM_WPR1 FM_WPR
+#define FM_SWPR1 FM_SWPR
+
+#define FM_WPXS 0x30 /* r/w the write ptr. for synchr. qu.*/
+#define FM_WPXA0 0x31 /* r/w the write ptr. for asyn. qu.0 */
+#define FM_WPXA1 0x32 /* r/w the write ptr. for asyn. qu.1 */
+#define FM_WPXA2 0x33 /* r/w the write ptr. for asyn. qu.2 */
+#define FM_SWPXS 0x34 /* r/w the shadow wr.-ptr. for syn.q.*/
+#define FM_SWPXA0 0x35 /* r/w the shad. wr.-ptr. for asyn.q0*/
+#define FM_SWPXA1 0x36 /* r/w the shad. wr.-ptr. for asyn.q1*/
+#define FM_SWPXA2 0x37 /* r/w the shad. wr.-ptr. for asyn.q2*/
+#define FM_RPXS 0x38 /* r/w the read ptr. for synchr. qu. */
+#define FM_RPXA0 0x39 /* r/w the read ptr. for asyn. qu. 0 */
+#define FM_RPXA1 0x3a /* r/w the read ptr. for asyn. qu. 1 */
+#define FM_RPXA2 0x3b /* r/w the read ptr. for asyn. qu. 2 */
+#define FM_MARR 0x3c /* r/w the memory read addr register */
+#define FM_MARW 0x3d /* r/w the memory write addr register*/
+#define FM_MDRU 0x3e /* r/w upper 16-bit of mem. data reg */
+#define FM_MDRL 0x3f /* r/w lower 16-bit of mem. data reg */
+
+/* following instructions relate to MAC counters and timer */
+#define FM_TMSYNC 0x40 /* r/w upper 16 bits of TMSYNC timer */
+#define FM_FCNTR 0x41 /* r/w the 16-bit frame counter */
+#define FM_LCNTR 0x42 /* r/w the 16-bit lost counter */
+#define FM_ECNTR 0x43 /* r/w the 16-bit error counter */
+
+/* Supernet 3: extensions to old register block */
+#define FM_FSCNTR 0x44 /* r/? Frame Strip Counter */
+#define FM_FRSELREG 0x45 /* r/w Frame Selection Register */
+
+/* Supernet 3: extensions for 2. receive queue etc. */
+#define FM_MDREG3 0x60 /* r/w Mode Register 3 */
+#define FM_ST3U 0x61 /* read upper 16-bit of status reg 3 */
+#define FM_ST3L 0x62 /* read lower 16-bit of status reg 3 */
+#define FM_IMSK3U 0x63 /* r/w upper 16-bit of IMSK reg 3 */
+#define FM_IMSK3L 0x64 /* r/w lower 16-bit of IMSK reg 3 */
+#define FM_IVR 0x65 /* read Interrupt Vector register */
+#define FM_IMR 0x66 /* r/w Interrupt mask register */
+/* 0x67 Hidden */
+#define FM_RPR2 0x68 /* r/w the read ptr. for rec. qu. 2 */
+#define FM_WPR2 0x69 /* r/w the write ptr. for rec. qu. 2 */
+#define FM_SWPR2 0x6a /* r/w the shadow wptr. for rec. q. 2 */
+#define FM_EARV2 0x6b /* r/w end addr of rec. qu. 2 */
+#define FM_UNLCKDLY 0x6c /* r/w Auto Unlock Delay register */
+ /* Bit 15-8: RECV2 unlock threshold */
+ /* Bit 7-0: RECV1 unlock threshold */
+/* 0x6f-0x73 Hidden */
+#define FM_LTDPA1 0x79 /* r/w Last Trans desc ptr for A1 qu. */
+/* 0x80-0x9a PLCS registers of built-in PLCS (Supernet 3 only) */
+
+/* Supernet 3: Adderss Filter Registers */
+#define FM_AFCMD 0xb0 /* r/w Address Filter Command Reg */
+#define FM_AFSTAT 0xb2 /* r/w Address Filter Status Reg */
+#define FM_AFBIST 0xb4 /* r/w Address Filter BIST signature */
+#define FM_AFCOMP2 0xb6 /* r/w Address Filter Comparand 2 */
+#define FM_AFCOMP1 0xb8 /* r/w Address Filter Comparand 1 */
+#define FM_AFCOMP0 0xba /* r/w Address Filter Comparand 0 */
+#define FM_AFMASK2 0xbc /* r/w Address Filter Mask 2 */
+#define FM_AFMASK1 0xbe /* r/w Address Filter Mask 1 */
+#define FM_AFMASK0 0xc0 /* r/w Address Filter Mask 0 */
+#define FM_AFPERS 0xc2 /* r/w Address Filter Personality Reg */
+
+/* Supernet 3: Orion (PDX?) Registers */
+#define FM_ORBIST 0xd0 /* r/w Orion BIST signature */
+#define FM_ORSTAT 0xd2 /* r/w Orion Status Register */
+
+
+/*
+ * Mode Register 1 (MDREG1)
+ */
+#define FM_RES0 0x0001 /* reserved */
+ /* SN3: other definition */
+#define FM_XMTINH_HOLD 0x0002 /* transmit-inhibit/hold bit */
+ /* SN3: other definition */
+#define FM_HOFLXI 0x0003 /* SN3: Hold / Flush / Inhibit */
+#define FM_FULL_HALF 0x0004 /* full-duplex/half-duplex bit */
+#define FM_LOCKTX 0x0008 /* lock-transmit-asynchr.-queues bit */
+#define FM_EXGPA0 0x0010 /* extended-group-addressing bit 0 */
+#define FM_EXGPA1 0x0020 /* extended-group-addressing bit 1 */
+#define FM_DISCRY 0x0040 /* disable-carry bit */
+ /* SN3: reserved */
+#define FM_SELRA 0x0080 /* select input from PHY (1=RA,0=RB) */
+
+#define FM_ADDET 0x0700 /* address detection */
+#define FM_MDAMA (0<<8) /* address detection : DA = MA */
+#define FM_MDASAMA (1<<8) /* address detection : DA=MA||SA=MA */
+#define FM_MRNNSAFNMA (2<<8) /* rec. non-NSA frames DA=MA&&SA!=MA */
+#define FM_MRNNSAF (3<<8) /* rec. non-NSA frames DA = MA */
+#define FM_MDISRCV (4<<8) /* disable receive function */
+#define FM_MRES0 (5<<8) /* reserve */
+#define FM_MLIMPROM (6<<8) /* limited-promiscuous mode */
+#define FM_MPROMISCOUS (7<<8) /* address detection : promiscuous */
+
+#define FM_SELSA 0x0800 /* select-short-address bit */
+
+#define FM_MMODE 0x7000 /* mode select */
+#define FM_MINIT (0<<12) /* initialize */
+#define FM_MMEMACT (1<<12) /* memory activate */
+#define FM_MONLINESP (2<<12) /* on-line special */
+#define FM_MONLINE (3<<12) /* on-line (FDDI operational mode) */
+#define FM_MILOOP (4<<12) /* internal loopback */
+#define FM_MRES1 (5<<12) /* reserved */
+#define FM_MRES2 (6<<12) /* reserved */
+#define FM_MELOOP (7<<12) /* external loopback */
+
+#define FM_SNGLFRM 0x8000 /* single-frame-receive mode */
+ /* SN3: reserved */
+
+#define MDR1INIT (FM_MINIT | FM_MDAMA)
+
+/*
+ * Mode Register 2 (MDREG2)
+ */
+#define FM_AFULL 0x000f /* 4-bit value (empty loc.in txqueue)*/
+#define FM_RCVERR 0x0010 /* rec.-errored-frames bit */
+#define FM_SYMCTL 0x0020 /* sysmbol-control bit */
+ /* SN3: reserved */
+#define FM_SYNPRQ 0x0040 /* synchron.-NP-DMA-request bit */
+#define FM_ENNPRQ 0x0080 /* enable-NP-DMA-request bit */
+#define FM_ENHSRQ 0x0100 /* enable-host-request bit */
+#define FM_RXFBB01 0x0600 /* rec. frame byte boundary bit0 & 1 */
+#define FM_LSB 0x0800 /* determ. ordering of bytes in buffer*/
+#define FM_PARITY 0x1000 /* 1 = even, 0 = odd */
+#define FM_CHKPAR 0x2000 /* 1 = parity of 32-bit buffer BD-bus*/
+#define FM_STRPFCS 0x4000 /* 1 = strips FCS field of rec.frame */
+#define FM_BMMODE 0x8000 /* Buffer-Memory-Mode (1 = tag mode) */
+ /* SN3: 1 = tag, 0 = modified tag */
+
+/*
+ * Status Register 1, Upper 16 Bits (ST1U)
+ */
+#define FM_STEFRMS 0x0001 /* transmit end of frame: synchr. qu.*/
+#define FM_STEFRMA0 0x0002 /* transmit end of frame: asyn. qu.0 */
+#define FM_STEFRMA1 0x0004 /* transmit end of frame: asyn. qu.1 */
+#define FM_STEFRMA2 0x0008 /* transmit end of frame: asyn. qu.2 */
+ /* SN3: reserved */
+#define FM_STECFRMS 0x0010 /* transmit end of chain of syn. qu. */
+ /* SN3: reserved */
+#define FM_STECFRMA0 0x0020 /* transmit end of chain of asyn. q0 */
+ /* SN3: reserved */
+#define FM_STECFRMA1 0x0040 /* transmit end of chain of asyn. q1 */
+ /* SN3: STECMDA1 */
+#define FM_STECMDA1 0x0040 /* SN3: 'no description' */
+#define FM_STECFRMA2 0x0080 /* transmit end of chain of asyn. q2 */
+ /* SN3: reserved */
+#define FM_STEXDONS 0x0100 /* transmit until XDONE in syn. qu. */
+#define FM_STBFLA 0x0200 /* asynchr.-queue trans. buffer full */
+#define FM_STBFLS 0x0400 /* synchr.-queue transm. buffer full */
+#define FM_STXABRS 0x0800 /* synchr. queue transmit-abort */
+#define FM_STXABRA0 0x1000 /* asynchr. queue 0 transmit-abort */
+#define FM_STXABRA1 0x2000 /* asynchr. queue 1 transmit-abort */
+#define FM_STXABRA2 0x4000 /* asynchr. queue 2 transmit-abort */
+ /* SN3: reserved */
+#define FM_SXMTABT 0x8000 /* transmit abort */
+
+/*
+ * Status Register 1, Lower 16 Bits (ST1L)
+ */
+#define FM_SQLCKS 0x0001 /* queue lock for synchr. queue */
+#define FM_SQLCKA0 0x0002 /* queue lock for asynchr. queue 0 */
+#define FM_SQLCKA1 0x0004 /* queue lock for asynchr. queue 1 */
+#define FM_SQLCKA2 0x0008 /* queue lock for asynchr. queue 2 */
+ /* SN3: reserved */
+#define FM_STXINFLS 0x0010 /* transmit instruction full: syn. */
+ /* SN3: reserved */
+#define FM_STXINFLA0 0x0020 /* transmit instruction full: asyn.0 */
+ /* SN3: reserved */
+#define FM_STXINFLA1 0x0040 /* transmit instruction full: asyn.1 */
+ /* SN3: reserved */
+#define FM_STXINFLA2 0x0080 /* transmit instruction full: asyn.2 */
+ /* SN3: reserved */
+#define FM_SPCEPDS 0x0100 /* parity/coding error: syn. queue */
+#define FM_SPCEPDA0 0x0200 /* parity/coding error: asyn. queue0 */
+#define FM_SPCEPDA1 0x0400 /* parity/coding error: asyn. queue1 */
+#define FM_SPCEPDA2 0x0800 /* parity/coding error: asyn. queue2 */
+ /* SN3: reserved */
+#define FM_STBURS 0x1000 /* transmit buffer underrun: syn. q. */
+#define FM_STBURA0 0x2000 /* transmit buffer underrun: asyn.0 */
+#define FM_STBURA1 0x4000 /* transmit buffer underrun: asyn.1 */
+#define FM_STBURA2 0x8000 /* transmit buffer underrun: asyn.2 */
+ /* SN3: reserved */
+
+/*
+ * Status Register 2, Upper 16 Bits (ST2U)
+ */
+#define FM_SOTRBEC 0x0001 /* other beacon received */
+#define FM_SMYBEC 0x0002 /* my beacon received */
+#define FM_SBEC 0x0004 /* beacon state entered */
+#define FM_SLOCLM 0x0008 /* low claim received */
+#define FM_SHICLM 0x0010 /* high claim received */
+#define FM_SMYCLM 0x0020 /* my claim received */
+#define FM_SCLM 0x0040 /* claim state entered */
+#define FM_SERRSF 0x0080 /* error in special frame */
+#define FM_SNFSLD 0x0100 /* NP and FORMAC+ simultaneous load */
+#define FM_SRFRCTOV 0x0200 /* receive frame counter overflow */
+ /* SN3: reserved */
+#define FM_SRCVFRM 0x0400 /* receive frame */
+ /* SN3: reserved */
+#define FM_SRCVOVR 0x0800 /* receive FIFO overflow */
+#define FM_SRBFL 0x1000 /* receive buffer full */
+#define FM_SRABT 0x2000 /* receive abort */
+#define FM_SRBMT 0x4000 /* receive buffer empty */
+#define FM_SRCOMP 0x8000 /* receive complete. Nontag mode */
+
+/*
+ * Status Register 2, Lower 16 Bits (ST2L)
+ * Attention: SN3 docu shows these bits the other way around
+ */
+#define FM_SRES0 0x0001 /* reserved */
+#define FM_SESTRIPTK 0x0001 /* SN3: 'no description' */
+#define FM_STRTEXR 0x0002 /* TRT expired in claim | beacon st. */
+#define FM_SDUPCLM 0x0004 /* duplicate claim received */
+#define FM_SSIFG 0x0008 /* short interframe gap */
+#define FM_SFRMCTR 0x0010 /* frame counter overflow */
+#define FM_SERRCTR 0x0020 /* error counter overflow */
+#define FM_SLSTCTR 0x0040 /* lost counter overflow */
+#define FM_SPHINV 0x0080 /* PHY invalid */
+#define FM_SADET 0x0100 /* address detect */
+#define FM_SMISFRM 0x0200 /* missed frame */
+#define FM_STRTEXP 0x0400 /* TRT expired and late count > 0 */
+#define FM_STVXEXP 0x0800 /* TVX expired */
+#define FM_STKISS 0x1000 /* token issued */
+#define FM_STKERR 0x2000 /* token error */
+#define FM_SMULTDA 0x4000 /* multiple destination address */
+#define FM_SRNGOP 0x8000 /* ring operational */
+
+/*
+ * Supernet 3:
+ * Status Register 3, Upper 16 Bits (ST3U)
+ */
+#define FM_SRQUNLCK1 0x0001 /* receive queue unlocked queue 1 */
+#define FM_SRQUNLCK2 0x0002 /* receive queue unlocked queue 2 */
+#define FM_SRPERRQ1 0x0004 /* receive parity error rx queue 1 */
+#define FM_SRPERRQ2 0x0008 /* receive parity error rx queue 2 */
+ /* Bit 4-10: reserved */
+#define FM_SRCVOVR2 0x0800 /* receive FIFO overfull rx queue 2 */
+#define FM_SRBFL2 0x1000 /* receive buffer full rx queue 2 */
+#define FM_SRABT2 0x2000 /* receive abort rx queue 2 */
+#define FM_SRBMT2 0x4000 /* receive buf empty rx queue 2 */
+#define FM_SRCOMP2 0x8000 /* receive comp rx queue 2 */
+
+/*
+ * Supernet 3:
+ * Status Register 3, Lower 16 Bits (ST3L)
+ */
+#define FM_AF_BIST_DONE 0x0001 /* Address Filter BIST is done */
+#define FM_PLC_BIST_DONE 0x0002 /* internal PLC Bist is done */
+#define FM_PDX_BIST_DONE 0x0004 /* PDX BIST is done */
+ /* Bit 3: reserved */
+#define FM_SICAMDAMAT 0x0010 /* Status internal CAM DA match */
+#define FM_SICAMDAXACT 0x0020 /* Status internal CAM DA exact match */
+#define FM_SICAMSAMAT 0x0040 /* Status internal CAM SA match */
+#define FM_SICAMSAXACT 0x0080 /* Status internal CAM SA exact match */
+
+/*
+ * MAC State-Machine Register FM_STMCHN
+ */
+#define FM_MDRTAG 0x0004 /* tag bit of long word read */
+#define FM_SNPPND 0x0008 /* r/w from buffer mem. is pending */
+#define FM_TXSTAT 0x0070 /* transmitter state machine state */
+#define FM_RCSTAT 0x0380 /* receiver state machine state */
+#define FM_TM01 0x0c00 /* indicate token mode */
+#define FM_SIM 0x1000 /* indicate send immediate-mode */
+#define FM_REV 0xe000 /* FORMAC Plus revision number */
+
+/*
+ * Supernet 3
+ * Mode Register 3
+ */
+#define FM_MENRS 0x0001 /* Ena enhanced rec status encoding */
+#define FM_MENXS 0x0002 /* Ena enhanced xmit status encoding */
+#define FM_MENXCT 0x0004 /* Ena EXACT/INEXACT matching */
+#define FM_MENAFULL 0x0008 /* Ena enh QCTRL encoding for AFULL */
+#define FM_MEIND 0x0030 /* Ena enh A,C indicator settings */
+#define FM_MENQCTRL 0x0040 /* Ena enh QCTRL encoding */
+#define FM_MENRQAUNLCK 0x0080 /* Ena rec q auto unlock */
+#define FM_MENDAS 0x0100 /* Ena DAS connections by cntr MUX */
+#define FM_MENPLCCST 0x0200 /* Ena Counter Segm test in PLC blck */
+#define FM_MENSGLINT 0x0400 /* Ena Vectored Interrupt reading */
+#define FM_MENDRCV 0x0800 /* Ena dual receive queue operation */
+#define FM_MENFCLOC 0x3000 /* Ena FC location within frm data */
+#define FM_MENTRCMD 0x4000 /* Ena ASYNC1 xmit only after command */
+#define FM_MENTDLPBK 0x8000 /* Ena TDAT to RDAT lkoopback */
+
+/*
+ * Supernet 3
+ * Frame Selection Register
+ */
+#define FM_RECV1 0x000f /* options for receive queue 1 */
+#define FM_RCV1_ALL (0<<0) /* receive all frames */
+#define FM_RCV1_LLC (1<<0) /* rec all LLC frames */
+#define FM_RCV1_SMT (2<<0) /* rec all SMT frames */
+#define FM_RCV1_NSMT (3<<0) /* rec non-SMT frames */
+#define FM_RCV1_IMP (4<<0) /* rec Implementor frames */
+#define FM_RCV1_MAC (5<<0) /* rec all MAC frames */
+#define FM_RCV1_SLLC (6<<0) /* rec all sync LLC frames */
+#define FM_RCV1_ALLC (7<<0) /* rec all async LLC frames */
+#define FM_RCV1_VOID (8<<0) /* rec all void frames */
+#define FM_RCV1_ALSMT (9<<0) /* rec all async LLC & SMT frames */
+#define FM_RECV2 0x00f0 /* options for receive queue 2 */
+#define FM_RCV2_ALL (0<<4) /* receive all other frames */
+#define FM_RCV2_LLC (1<<4) /* rec all LLC frames */
+#define FM_RCV2_SMT (2<<4) /* rec all SMT frames */
+#define FM_RCV2_NSMT (3<<4) /* rec non-SMT frames */
+#define FM_RCV2_IMP (4<<4) /* rec Implementor frames */
+#define FM_RCV2_MAC (5<<4) /* rec all MAC frames */
+#define FM_RCV2_SLLC (6<<4) /* rec all sync LLC frames */
+#define FM_RCV2_ALLC (7<<4) /* rec all async LLC frames */
+#define FM_RCV2_VOID (8<<4) /* rec all void frames */
+#define FM_RCV2_ALSMT (9<<4) /* rec all async LLC & SMT frames */
+#define FM_ENXMTADSWAP 0x4000 /* enh rec addr swap (phys -> can) */
+#define FM_ENRCVADSWAP 0x8000 /* enh tx addr swap (can -> phys) */
+
+/*
+ * Supernet 3:
+ * Address Filter Command Register (AFCMD)
+ */
+#define FM_INST 0x0007 /* Address Filter Operation */
+#define FM_IINV_CAM (0<<0) /* Invalidate CAM */
+#define FM_IWRITE_CAM (1<<0) /* Write CAM */
+#define FM_IREAD_CAM (2<<0) /* Read CAM */
+#define FM_IRUN_BIST (3<<0) /* Run BIST */
+#define FM_IFIND (4<<0) /* Find */
+#define FM_IINV (5<<0) /* Invalidate */
+#define FM_ISKIP (6<<0) /* Skip */
+#define FM_ICL_SKIP (7<<0) /* Clear all SKIP bits */
+
+/*
+ * Supernet 3:
+ * Address Filter Status Register (AFSTAT)
+ */
+ /* Bit 0-4: reserved */
+#define FM_REV_NO 0x00e0 /* Revision Number of Address Filter */
+#define FM_BIST_DONE 0x0100 /* BIST complete */
+#define FM_EMPTY 0x0200 /* CAM empty */
+#define FM_ERROR 0x0400 /* Error (improper operation) */
+#define FM_MULT 0x0800 /* Multiple Match */
+#define FM_EXACT 0x1000 /* Exact Match */
+#define FM_FOUND 0x2000 /* Comparand found in CAM */
+#define FM_FULL 0x4000 /* CAM full */
+#define FM_DONE 0x8000 /* DONE indicator */
+
+/*
+ * Supernet 3:
+ * BIST Signature Register (AFBIST)
+ */
+#define AF_BIST_SIGNAT 0x0553 /* Address Filter BIST Signature */
+
+/*
+ * Supernet 3:
+ * Personality Register (AFPERS)
+ */
+#define FM_VALID 0x0001 /* CAM Entry Valid */
+#define FM_DA 0x0002 /* Destination Address */
+#define FM_DAX 0x0004 /* Destination Address Exact */
+#define FM_SA 0x0008 /* Source Address */
+#define FM_SAX 0x0010 /* Source Address Exact */
+#define FM_SKIP 0x0020 /* Skip this entry */
+
+/*
+ * instruction set for command register 1 (NPADDR6-0 = 0x00)
+ */
+#define FM_IRESET 0x01 /* software reset */
+#define FM_IRMEMWI 0x02 /* load Memory Data Reg., inc MARR */
+#define FM_IRMEMWO 0x03 /* load MDR from buffer memory, n.i. */
+#define FM_IIL 0x04 /* idle/listen */
+#define FM_ICL 0x05 /* claim/listen */
+#define FM_IBL 0x06 /* beacon/listen */
+#define FM_ILTVX 0x07 /* load TVX timer from TVX reg */
+#define FM_INRTM 0x08 /* nonrestricted token mode */
+#define FM_IENTM 0x09 /* enter nonrestricted token mode */
+#define FM_IERTM 0x0a /* enter restricted token mode */
+#define FM_IRTM 0x0b /* restricted token mode */
+#define FM_ISURT 0x0c /* send unrestricted token */
+#define FM_ISRT 0x0d /* send restricted token */
+#define FM_ISIM 0x0e /* enter send-immediate mode */
+#define FM_IESIM 0x0f /* exit send-immediate mode */
+#define FM_ICLLS 0x11 /* clear synchronous queue lock */
+#define FM_ICLLA0 0x12 /* clear asynchronous queue 0 lock */
+#define FM_ICLLA1 0x14 /* clear asynchronous queue 1 lock */
+#define FM_ICLLA2 0x18 /* clear asynchronous queue 2 lock */
+ /* SN3: reserved */
+#define FM_ICLLR 0x20 /* clear receive queue (SN3:1) lock */
+#define FM_ICLLR2 0x21 /* SN3: clear receive queue 2 lock */
+#define FM_ITRXBUS 0x22 /* SN3: Tristate X-Bus (SAS only) */
+#define FM_IDRXBUS 0x23 /* SN3: drive X-Bus */
+#define FM_ICLLAL 0x3f /* clear all queue locks */
+
+/*
+ * instruction set for command register 2 (NPADDR6-0 = 0x01)
+ */
+#define FM_ITRS 0x01 /* transmit synchronous queue */
+ /* SN3: reserved */
+#define FM_ITRA0 0x02 /* transmit asynchronous queue 0 */
+ /* SN3: reserved */
+#define FM_ITRA1 0x04 /* transmit asynchronous queue 1 */
+ /* SN3: reserved */
+#define FM_ITRA2 0x08 /* transmit asynchronous queue 2 */
+ /* SN3: reserved */
+#define FM_IACTR 0x10 /* abort current transmit activity */
+#define FM_IRSTQ 0x20 /* reset transmit queues */
+#define FM_ISTTB 0x30 /* set tag bit */
+#define FM_IERSF 0x40 /* enable receive single frame */
+ /* SN3: reserved */
+#define FM_ITR 0x50 /* SN3: Transmit Command */
+
+
+/*
+ * defines for PLC (Am79C864)
+ */
+
+/*
+ * PLC read/write (r/w) registers
+ */
+#define PL_CNTRL_A 0x00 /* control register A (r/w) */
+#define PL_CNTRL_B 0x01 /* control register B (r/w) */
+#define PL_INTR_MASK 0x02 /* interrupt mask (r/w) */
+#define PL_XMIT_VECTOR 0x03 /* transmit vector register (r/w) */
+#define PL_VECTOR_LEN 0x04 /* transmit vector length (r/w) */
+#define PL_LE_THRESHOLD 0x05 /* link error event threshold (r/w) */
+#define PL_C_MIN 0x06 /* minimum connect state time (r/w) */
+#define PL_TL_MIN 0x07 /* min. line state transmit t. (r/w) */
+#define PL_TB_MIN 0x08 /* minimum break time (r/w) */
+#define PL_T_OUT 0x09 /* signal timeout (r/w) */
+#define PL_CNTRL_C 0x0a /* control register C (r/w) */
+#define PL_LC_LENGTH 0x0b /* link confidence test time (r/w) */
+#define PL_T_SCRUB 0x0c /* scrub time = MAC TVX (r/w) */
+#define PL_NS_MAX 0x0d /* max. noise time before break (r/w)*/
+#define PL_TPC_LOAD_V 0x0e /* TPC timer load value (write only) */
+#define PL_TNE_LOAD_V 0x0f /* TNE timer load value (write only) */
+#define PL_STATUS_A 0x10 /* status register A (read only) */
+#define PL_STATUS_B 0x11 /* status register B (read only) */
+#define PL_TPC 0x12 /* timer for PCM (ro) [20.48 us] */
+#define PL_TNE 0x13 /* time of noise event [0.32 us] */
+#define PL_CLK_DIV 0x14 /* TNE clock divider (read only) */
+#define PL_BIST_SIGNAT 0x15 /* built in self test signature (ro)*/
+#define PL_RCV_VECTOR 0x16 /* receive vector reg. (read only) */
+#define PL_INTR_EVENT 0x17 /* interrupt event reg. (read only) */
+#define PL_VIOL_SYM_CTR 0x18 /* violation symbol count. (read o) */
+#define PL_MIN_IDLE_CTR 0x19 /* minimum idle counter (read only) */
+#define PL_LINK_ERR_CTR 0x1a /* link error event ctr.(read only) */
+#ifdef MOT_ELM
+#define PL_T_FOT_ASS 0x1e /* FOTOFF Assert Timer */
+#define PL_T_FOT_DEASS 0x1f /* FOTOFF Deassert Timer */
+#endif /* MOT_ELM */
+
+#ifdef MOT_ELM
+/*
+ * Special Quad-Elm Registers.
+ * A Quad-ELM consists of for ELMs and these additional registers.
+ */
+#define QELM_XBAR_W 0x80 /* Crossbar Control ELM W */
+#define QELM_XBAR_X 0x81 /* Crossbar Control ELM X */
+#define QELM_XBAR_Y 0x82 /* Crossbar Control ELM Y */
+#define QELM_XBAR_Z 0x83 /* Crossbar Control ELM Z */
+#define QELM_XBAR_P 0x84 /* Crossbar Control Bus P */
+#define QELM_XBAR_S 0x85 /* Crossbar Control Bus S */
+#define QELM_XBAR_R 0x86 /* Crossbar Control Bus R */
+#define QELM_WR_XBAR 0x87 /* Write the Crossbar now (write) */
+#define QELM_CTR_W 0x88 /* Counter W */
+#define QELM_CTR_X 0x89 /* Counter X */
+#define QELM_CTR_Y 0x8a /* Counter Y */
+#define QELM_CTR_Z 0x8b /* Counter Z */
+#define QELM_INT_MASK 0x8c /* Interrupt mask register */
+#define QELM_INT_DATA 0x8d /* Interrupt data (event) register */
+#define QELM_ELMB 0x00 /* Elm base */
+#define QELM_ELM_SIZE 0x20 /* ELM size */
+#endif /* MOT_ELM */
+/*
+ * PLC control register A (PL_CNTRL_A: log. addr. 0x00)
+ * It is used for timer configuration, specification of PCM MAINT state option,
+ * counter interrupt frequency, PLC data path config. and Built In Self Test.
+ */
+#define PL_RUN_BIST 0x0001 /* begin running its Built In Self T.*/
+#define PL_RF_DISABLE 0x0002 /* disable the Repeat Filter state m.*/
+#define PL_SC_REM_LOOP 0x0004 /* remote loopback path */
+#define PL_SC_BYPASS 0x0008 /* by providing a physical bypass */
+#define PL_LM_LOC_LOOP 0x0010 /* loop path just after elastic buff.*/
+#define PL_EB_LOC_LOOP 0x0020 /* loop path just prior to PDT/PDR IF*/
+#define PL_FOT_OFF 0x0040 /* assertion of /FOTOFF pin of PLC */
+#define PL_LOOPBACK 0x0080 /* it cause the /LPBCK pin ass. low */
+#define PL_MINI_CTR_INT 0x0100 /* partially contr. when bit is ass. */
+#define PL_VSYM_CTR_INT 0x0200 /* controls when int bit is asserted */
+#define PL_ENA_PAR_CHK 0x0400 /* enable parity check */
+#define PL_REQ_SCRUB 0x0800 /* limited access to scrub capability*/
+#define PL_TPC_16BIT 0x1000 /* causes the TPC as a 16 bit timer */
+#define PL_TNE_16BIT 0x2000 /* causes the TNE as a 16 bit timer */
+#define PL_NOISE_TIMER 0x4000 /* allows the noise timing function */
+
+/*
+ * PLC control register B (PL_CNTRL_B: log. addr. 0x01)
+ * It contains signals and requeste to direct the process of PCM and it is also
+ * used to control the Line State Match interrupt.
+ */
+#define PL_PCM_CNTRL 0x0003 /* control PCM state machine */
+#define PL_PCM_NAF (0) /* state is not affected */
+#define PL_PCM_START (1) /* goes to the BREAK state */
+#define PL_PCM_TRACE (2) /* goes to the TRACE state */
+#define PL_PCM_STOP (3) /* goes to the OFF state */
+
+#define PL_MAINT 0x0004 /* if OFF state --> MAINT state */
+#define PL_LONG 0x0008 /* perf. a long Link Confid.Test(LCT)*/
+#define PL_PC_JOIN 0x0010 /* if NEXT state --> JOIN state */
+
+#define PL_PC_LOOP 0x0060 /* loopback used in the LCT */
+#define PL_NOLCT (0<<5) /* no LCT is performed */
+#define PL_TPDR (1<<5) /* PCM asserts transmit PDR */
+#define PL_TIDLE (2<<5) /* PCM asserts transmit idle */
+#define PL_RLBP (3<<5) /* trans. PDR & remote loopb. path */
+
+#define PL_CLASS_S 0x0080 /* signif. that single att. station */
+
+#define PL_MAINT_LS 0x0700 /* line state while in the MAINT st. */
+#define PL_M_QUI0 (0<<8) /* transmit QUIET line state */
+#define PL_M_IDLE (1<<8) /* transmit IDLE line state */
+#define PL_M_HALT (2<<8) /* transmit HALT line state */
+#define PL_M_MASTR (3<<8) /* transmit MASTER line state */
+#define PL_M_QUI1 (4<<8) /* transmit QUIET line state */
+#define PL_M_QUI2 (5<<8) /* transmit QUIET line state */
+#define PL_M_TPDR (6<<8) /* tr. PHY_DATA requ.-symbol is tr.ed*/
+#define PL_M_QUI3 (7<<8) /* transmit QUIET line state */
+
+#define PL_MATCH_LS 0x7800 /* line state to be comp. with curr.*/
+#define PL_I_ANY (0<<11) /* Int. on any change in *_LINE_ST */
+#define PL_I_IDLE (1<<11) /* Interrupt on IDLE line state */
+#define PL_I_HALT (2<<11) /* Interrupt on HALT line state */
+#define PL_I_MASTR (4<<11) /* Interrupt on MASTER line state */
+#define PL_I_QUIET (8<<11) /* Interrupt on QUIET line state */
+
+#define PL_CONFIG_CNTRL 0x8000 /* control over scrub, byp. & loopb.*/
+
+/*
+ * PLC control register C (PL_CNTRL_C: log. addr. 0x0a)
+ * It contains the scrambling control registers (PLC-S only)
+ */
+#define PL_C_CIPHER_ENABLE (1<<0) /* enable scrambler */
+#define PL_C_CIPHER_LPBCK (1<<1) /* loopback scrambler */
+#define PL_C_SDOFF_ENABLE (1<<6) /* enable SDOFF timer */
+#define PL_C_SDON_ENABLE (1<<7) /* enable SDON timer */
+#ifdef MOT_ELM
+#define PL_C_FOTOFF_CTRL (3<<2) /* FOTOFF timer control */
+#define PL_C_FOTOFF_TIM (0<<2) /* FOTOFF use timer for (de)-assert */
+#define PL_C_FOTOFF_INA (2<<2) /* FOTOFF forced inactive */
+#define PL_C_FOTOFF_ACT (3<<2) /* FOTOFF forced active */
+#define PL_C_FOTOFF_SRCE (1<<4) /* FOTOFF source is PCM state != OFF */
+#define PL_C_RXDATA_EN (1<<5) /* Rec scr data forced to 0 */
+#define PL_C_SDNRZEN (1<<8) /* Monitor rec descr. data for act */
+#else /* nMOT_ELM */
+#define PL_C_FOTOFF_CTRL (3<<8) /* FOTOFF timer control */
+#define PL_C_FOTOFF_0 (0<<8) /* timer off */
+#define PL_C_FOTOFF_30 (1<<8) /* 30uS */
+#define PL_C_FOTOFF_50 (2<<8) /* 50uS */
+#define PL_C_FOTOFF_NEVER (3<<8) /* never */
+#define PL_C_SDON_TIMER (3<<10) /* SDON timer control */
+#define PL_C_SDON_084 (0<<10) /* 0.84 uS */
+#define PL_C_SDON_132 (1<<10) /* 1.32 uS */
+#define PL_C_SDON_252 (2<<10) /* 2.52 uS */
+#define PL_C_SDON_512 (3<<10) /* 5.12 uS */
+#define PL_C_SOFF_TIMER (3<<12) /* SDOFF timer control */
+#define PL_C_SOFF_076 (0<<12) /* 0.76 uS */
+#define PL_C_SOFF_132 (1<<12) /* 1.32 uS */
+#define PL_C_SOFF_252 (2<<12) /* 2.52 uS */
+#define PL_C_SOFF_512 (3<<12) /* 5.12 uS */
+#define PL_C_TSEL (3<<14) /* scrambler path select */
+#endif /* nMOT_ELM */
+
+/*
+ * PLC status register A (PL_STATUS_A: log. addr. 0x10)
+ * It is used to report status information to the Node Processor about the
+ * Line State Machine (LSM).
+ */
+#ifdef MOT_ELM
+#define PLC_INT_MASK 0xc000 /* ELM integration bits in status A */
+#define PLC_INT_C 0x0000 /* ELM Revision Band C */
+#define PLC_INT_CAMEL 0x4000 /* ELM integrated into CAMEL */
+#define PLC_INT_QE 0x8000 /* ELM integrated into Quad ELM */
+#define PLC_REV_MASK 0x3800 /* revision bits in status A */
+#define PLC_REVISION_B 0x0000 /* rev bits for ELM Rev B */
+#define PLC_REVISION_QA 0x0800 /* rev bits for ELM core in QELM-A */
+#else /* nMOT_ELM */
+#define PLC_REV_MASK 0xf800 /* revision bits in status A */
+#define PLC_REVISION_A 0x0000 /* revision bits for PLC */
+#define PLC_REVISION_S 0xf800 /* revision bits for PLC-S */
+#define PLC_REV_SN3 0x7800 /* revision bits for PLC-S in IFCP */
+#endif /* nMOT_ELM */
+#define PL_SYM_PR_CTR 0x0007 /* contains the LSM symbol pair Ctr. */
+#define PL_UNKN_LINE_ST 0x0008 /* unknown line state bit from LSM */
+#define PL_LSM_STATE 0x0010 /* state bit of LSM */
+
+#define PL_LINE_ST 0x00e0 /* contains recogn. line state of LSM*/
+#define PL_L_NLS (0<<5) /* noise line state */
+#define PL_L_ALS (1<<5) /* activ line state */
+#define PL_L_UND (2<<5) /* undefined */
+#define PL_L_ILS4 (3<<5) /* idle l. s. (after 4 idle symbols) */
+#define PL_L_QLS (4<<5) /* quiet line state */
+#define PL_L_MLS (5<<5) /* master line state */
+#define PL_L_HLS (6<<5) /* halt line state */
+#define PL_L_ILS16 (7<<5) /* idle line state (after 16 idle s.)*/
+
+#define PL_PREV_LINE_ST 0x0300 /* value of previous line state */
+#define PL_P_QLS (0<<8) /* quiet line state */
+#define PL_P_MLS (1<<8) /* master line state */
+#define PL_P_HLS (2<<8) /* halt line state */
+#define PL_P_ILS16 (3<<8) /* idle line state (after 16 idle s.)*/
+
+#define PL_SIGNAL_DET 0x0400 /* 1=that signal detect is deasserted*/
+
+
+/*
+ * PLC status register B (PL_STATUS_B: log. addr. 0x11)
+ * It contains signals and status from the repeat filter and PCM state machine.
+ */
+#define PL_BREAK_REASON 0x0007 /* reason for PCM state mach.s to br.*/
+#define PL_B_NOT (0) /* PCM SM has not gone to BREAK state*/
+#define PL_B_PCS (1) /* PC_Start issued */
+#define PL_B_TPC (2) /* TPC timer expired after T_OUT */
+#define PL_B_TNE (3) /* TNE timer expired after NS_MAX */
+#define PL_B_QLS (4) /* quit line state detected */
+#define PL_B_ILS (5) /* idle line state detected */
+#define PL_B_HLS (6) /* halt line state detected */
+
+#define PL_TCF 0x0008 /* transmit code flag (start exec.) */
+#define PL_RCF 0x0010 /* receive code flag (start exec.) */
+#define PL_LSF 0x0020 /* line state flag (l.s. has been r.)*/
+#define PL_PCM_SIGNAL 0x0040 /* indic. that XMIT_VECTOR hb.written*/
+
+#define PL_PCM_STATE 0x0780 /* state bits of PCM state machine */
+#define PL_PC0 (0<<7) /* OFF - when /RST or PCM_CNTRL */
+#define PL_PC1 (1<<7) /* BREAK - entry point in start PCM*/
+#define PL_PC2 (2<<7) /* TRACE - to localize stuck Beacon*/
+#define PL_PC3 (3<<7) /* CONNECT - synchronize ends of conn*/
+#define PL_PC4 (4<<7) /* NEXT - to separate the signalng*/
+#define PL_PC5 (5<<7) /* SIGNAL - PCM trans/rec. bit infos*/
+#define PL_PC6 (6<<7) /* JOIN - 1. state to activ conn. */
+#define PL_PC7 (7<<7) /* VERIFY - 2. - " - (3. ACTIVE) */
+#define PL_PC8 (8<<7) /* ACTIVE - PHY has been incorporated*/
+#define PL_PC9 (9<<7) /* MAINT - for test purposes or so
+ that PCM op. completely in softw. */
+
+#define PL_PCI_SCRUB 0x0800 /* scrubbing function is being exec. */
+
+#define PL_PCI_STATE 0x3000 /* Physical Connect. Insertion SM */
+#define PL_CI_REMV (0<<12) /* REMOVED */
+#define PL_CI_ISCR (1<<12) /* INSERT_SCRUB */
+#define PL_CI_RSCR (2<<12) /* REMOVE_SCRUB */
+#define PL_CI_INS (3<<12) /* INSERTED */
+
+#define PL_RF_STATE 0xc000 /* state bit of repeate filter SM */
+#define PL_RF_REPT (0<<14) /* REPEAT */
+#define PL_RF_IDLE (1<<14) /* IDLE */
+#define PL_RF_HALT1 (2<<14) /* HALT1 */
+#define PL_RF_HALT2 (3<<14) /* HALT2 */
+
+
+/*
+ * PLC interrupt event register (PL_INTR_EVENT: log. addr. 0x17)
+ * It is read only and is clearde whenever it is read!
+ * It is used by the PLC to report events to the node processor.
+ */
+#define PL_PARITY_ERR 0x0001 /* p. error h.b.detected on TX9-0 inp*/
+#define PL_LS_MATCH 0x0002 /* l.s.== l.s. PLC_CNTRL_B's MATCH_LS*/
+#define PL_PCM_CODE 0x0004 /* transmit&receive | LCT complete */
+#define PL_TRACE_PROP 0x0008 /* master l.s. while PCM ACTIV|TRACE */
+#define PL_SELF_TEST 0x0010 /* QUIET|HALT while PCM in TRACE st. */
+#define PL_PCM_BREAK 0x0020 /* PCM has entered the BREAK state */
+#define PL_PCM_ENABLED 0x0040 /* asserted SC_JOIN, scrub. & ACTIV */
+#define PL_TPC_EXPIRED 0x0080 /* TPC timer reached zero */
+#define PL_TNE_EXPIRED 0x0100 /* TNE timer reached zero */
+#define PL_EBUF_ERR 0x0200 /* elastic buff. det. over-|underflow*/
+#define PL_PHYINV 0x0400 /* physical layer invalid signal */
+#define PL_VSYM_CTR 0x0800 /* violation symbol counter has incr.*/
+#define PL_MINI_CTR 0x1000 /* dep. on PLC_CNTRL_A's MINI_CTR_INT*/
+#define PL_LE_CTR 0x2000 /* link error event counter */
+#define PL_LSDO 0x4000 /* SDO input pin changed to a 1 */
+#define PL_NP_ERR 0x8000 /* NP has requested to r/w an inv. r.*/
+
+/*
+ * The PLC interrupt mask register (PL_INTR_MASK: log. addr. 0x02) constr. is
+ * equal PL_INTR_EVENT register.
+ * For each set bit, the setting of corresponding bit generate an int to NP.
+ */
+
+#ifdef MOT_ELM
+/*
+ * Quad ELM Crosbar Control register values (QELM_XBAR_?)
+ */
+#define QELM_XOUT_IDLE 0x0000 /* Idles/Passthrough */
+#define QELM_XOUT_P 0x0001 /* Output to: Bus P */
+#define QELM_XOUT_S 0x0002 /* Output to: Bus S */
+#define QELM_XOUT_R 0x0003 /* Output to: Bus R */
+#define QELM_XOUT_W 0x0004 /* Output to: ELM W */
+#define QELM_XOUT_X 0x0005 /* Output to: ELM X */
+#define QELM_XOUT_Y 0x0006 /* Output to: ELM Y */
+#define QELM_XOUT_Z 0x0007 /* Output to: ELM Z */
+
+/*
+ * Quad ELM Interrupt data and event registers.
+ */
+#define QELM_NP_ERR (1<<15) /* Node Processor Error */
+#define QELM_COUNT_Z (1<<7) /* Counter Z Interrupt */
+#define QELM_COUNT_Y (1<<6) /* Counter Y Interrupt */
+#define QELM_COUNT_X (1<<5) /* Counter X Interrupt */
+#define QELM_COUNT_W (1<<4) /* Counter W Interrupt */
+#define QELM_ELM_Z (1<<3) /* ELM Z Interrupt */
+#define QELM_ELM_Y (1<<2) /* ELM Y Interrupt */
+#define QELM_ELM_X (1<<1) /* ELM X Interrupt */
+#define QELM_ELM_W (1<<0) /* ELM W Interrupt */
+#endif /* MOT_ELM */
+/*
+ * PLC Timing Parameters
+ */
+#define TP_C_MIN 0xff9c /* 2 ms */
+#define TP_TL_MIN 0xfff0 /* 0.3 ms */
+#define TP_TB_MIN 0xff10 /* 5 ms */
+#define TP_T_OUT 0xd9db /* 200 ms */
+#define TP_LC_LENGTH 0xf676 /* 50 ms */
+#define TP_LC_LONGLN 0xa0a2 /* 500 ms */
+#define TP_T_SCRUB 0xff6d /* 3.5 ms */
+#define TP_NS_MAX 0xf021 /* 1.3 ms */
+
+/*
+ * BIST values
+ */
+#define PLC_BIST 0x6ecd /* BIST signature for PLC */
+#define PLCS_BIST 0x5b6b /* BIST signature for PLC-S */
+#define PLC_ELM_B_BIST 0x6ecd /* BIST signature of ELM Rev. B */
+#define PLC_ELM_D_BIST 0x5b6b /* BIST signature of ELM Rev. D */
+#define PLC_CAM_A_BIST 0x9e75 /* BIST signature of CAMEL Rev. A */
+#define PLC_CAM_B_BIST 0x5b6b /* BIST signature of CAMEL Rev. B */
+#define PLC_IFD_A_BIST 0x9e75 /* BIST signature of IFDDI Rev. A */
+#define PLC_IFD_B_BIST 0x5b6b /* BIST signature of IFDDI Rev. B */
+#define PLC_QELM_A_BIST 0x5b6b /* BIST signature of QELM Rev. A */
+
+/*
+ FDDI board recources
+ */
+
+/*
+ * request register array (log. addr: RQA_A + a<<1 {a=0..7}) write only.
+ * It specifies to FORMAC+ the type of buffer memory access the host requires.
+ */
+#define RQ_NOT 0 /* not request */
+#define RQ_RES 1 /* reserved */
+#define RQ_SFW 2 /* special frame write */
+#define RQ_RRQ 3 /* read request: receive queue */
+#define RQ_WSQ 4 /* write request: synchronous queue */
+#define RQ_WA0 5 /* write requ.: asynchronous queue 0 */
+#define RQ_WA1 6 /* write requ.: asynchronous queue 1 */
+#define RQ_WA2 7 /* write requ.: asynchronous queue 2 */
+
+#define SZ_LONG (sizeof(long))
+
+/*
+ * FDDI defaults
+ * NOTE : In the ANSI docs, times are specified in units of "symbol time".
+ * AMD chips use BCLK as unit. 1 BCKL == 2 symbols
+ */
+#define COMPLREF ((u_long)32*256*256) /* two's complement 21 bit */
+#define MSTOBCLK(x) ((u_long)(x)*12500L)
+#define MSTOTVX(x) (((u_long)(x)*1000L)/80/255)
+
+#endif /* _SUPERNET_ */
diff --git a/drivers/net/fddi/skfp/h/targethw.h b/drivers/net/fddi/skfp/h/targethw.h
new file mode 100644
index 000000000..842a69044
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/targethw.h
@@ -0,0 +1,138 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _TARGETHW_
+#define _TARGETHW_
+
+ /*
+ * PCI Watermark definition
+ */
+#ifdef PCI
+#define RX_WATERMARK 24
+#define TX_WATERMARK 24
+#define SK_ML_ID_1 0x20
+#define SK_ML_ID_2 0x30
+#endif
+
+#include "skfbi.h"
+#ifndef TAG_MODE
+#include "fplus.h"
+#else
+#include "fplustm.h"
+#endif
+
+#ifndef HW_PTR
+#define HW_PTR void __iomem *
+#endif
+
+#ifdef MULT_OEM
+#define OI_STAT_LAST 0 /* end of OEM data base */
+#define OI_STAT_PRESENT 1 /* entry present but not empty */
+#define OI_STAT_VALID 2 /* holds valid ID, but is not active */
+#define OI_STAT_ACTIVE 3 /* holds valid ID, entry is active */
+ /* active = adapter is supported */
+
+/* Memory representation of IDs must match representation in adapter. */
+struct s_oem_ids {
+ u_char oi_status ; /* Stat: last, present, valid, active */
+ u_char oi_mark[5] ; /* "PID00" .. "PID07" .. */
+ u_char oi_id[4] ; /* id bytes, representation as */
+ /* defined by hardware, */
+#ifdef PCI
+ u_char oi_sub_id[4] ; /* sub id bytes, representation as */
+ /* defined by hardware, */
+#endif
+} ;
+#endif /* MULT_OEM */
+
+
+struct s_smt_hw {
+ /*
+ * global
+ */
+ HW_PTR iop ; /* IO base address */
+ short dma ; /* DMA channel */
+ short irq ; /* IRQ level */
+ short eprom ; /* FLASH prom */
+
+#ifndef SYNC
+ u_short n_a_send ; /* pending send requests */
+#endif
+
+#if defined(PCI)
+ short slot ; /* slot number */
+ short max_slots ; /* maximum number of slots */
+ short wdog_used ; /* TRUE if the watch dog is used */
+#endif
+
+#ifdef PCI
+ u_short pci_handle ; /* handle to access the BIOS func */
+ u_long is_imask ; /* int maske for the int source reg */
+ u_long phys_mem_addr ; /* physical memory address */
+ u_short mc_dummy ; /* work around for MC compiler bug */
+ /*
+ * state of the hardware
+ */
+ u_short hw_state ; /* started or stopped */
+
+#define STARTED 1
+#define STOPPED 0
+
+ int hw_is_64bit ; /* does we have a 64 bit adapter */
+#endif
+
+#ifdef TAG_MODE
+ u_long pci_fix_value ; /* value parsed by PCIFIX */
+#endif
+
+ /*
+ * hwt.c
+ */
+ u_long t_start ; /* HWT start */
+ u_long t_stop ; /* HWT stop */
+ u_short timer_activ ; /* HWT timer active */
+
+ /*
+ * PIC
+ */
+ u_char pic_a1 ;
+ u_char pic_21 ;
+
+ /*
+ * GENERIC ; do not modify beyond this line
+ */
+
+ /*
+ * physical and canonical address
+ */
+ struct fddi_addr fddi_home_addr ;
+ struct fddi_addr fddi_canon_addr ;
+ struct fddi_addr fddi_phys_addr ;
+
+ /*
+ * mac variables
+ */
+ struct mac_parameter mac_pa ; /* tmin, tmax, tvx, treq .. */
+ struct mac_counter mac_ct ; /* recv., lost, error */
+ u_short mac_ring_is_up ; /* ring is up flag */
+
+ struct s_smt_fp fp ; /* formac+ */
+
+#ifdef MULT_OEM
+ struct s_oem_ids *oem_id ; /* pointer to selected id */
+ int oem_min_status ; /* IDs to take care of */
+#endif /* MULT_OEM */
+
+} ;
+#endif
diff --git a/drivers/net/fddi/skfp/h/targetos.h b/drivers/net/fddi/skfp/h/targetos.h
new file mode 100644
index 000000000..355194251
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/targetos.h
@@ -0,0 +1,164 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * Operating system specific definitions for driver and
+ * hardware module.
+ */
+
+#ifndef TARGETOS_H
+#define TARGETOS_H
+
+
+//-------- those should go into include/linux/pci.h
+#define PCI_VENDOR_ID_SK 0x1148
+#define PCI_DEVICE_ID_SK_FP 0x4000
+//--------
+
+
+
+//-------- those should go into include/linux/if_fddi.h
+#define FDDI_MAC_HDR_LEN 13
+
+#define FDDI_RII 0x01 /* routing information bit */
+#define FDDI_RCF_DIR_BIT 0x80
+#define FDDI_RCF_LEN_MASK 0x1f
+#define FDDI_RCF_BROADCAST 0x8000
+#define FDDI_RCF_LIMITED_BROADCAST 0xA000
+#define FDDI_RCF_FRAME2K 0x20
+#define FDDI_RCF_FRAME4K 0x30
+//--------
+
+
+#undef ADDR
+
+#include <asm/io.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/skbuff.h>
+#include <linux/pci.h>
+
+// is redefined by linux, but we need our definition
+#undef ADDR
+#ifdef MEM_MAPPED_IO
+#define ADDR(a) (smc->hw.iop+(a))
+#else
+#define ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), (smc->hw.iop+( ((a)&0x7F) | ((a)>>7 ? 0x80:0)) )) : (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
+#endif
+
+#include "hwmtm.h"
+
+#define TRUE 1
+#define FALSE 0
+
+// HWM Definitions
+// -----------------------
+#define FDDI_TRACE(string, arg1, arg2, arg3) // Performance analysis.
+#ifdef PCI
+#define NDD_TRACE(string, arg1, arg2, arg3) // Performance analysis.
+#endif // PCI
+#define SMT_PAGESIZE PAGE_SIZE // Size of a memory page (power of 2).
+// -----------------------
+
+
+// SMT Definitions
+// -----------------------
+#define TICKS_PER_SECOND HZ
+#define SMC_VERSION 1
+// -----------------------
+
+
+// OS-Driver Definitions
+// -----------------------
+#define NO_ADDRESS 0xffe0 /* No Device (I/O) Address */
+#define SKFP_MAX_NUM_BOARDS 8 /* maximum number of PCI boards */
+
+#define SK_BUS_TYPE_PCI 0
+#define SK_BUS_TYPE_EISA 1
+
+#define FP_IO_LEN 256 /* length of IO area used */
+
+#define u8 unsigned char
+#define u16 unsigned short
+#define u32 unsigned int
+
+#define MAX_TX_QUEUE_LEN 20 // number of packets queued by driver
+#define MAX_FRAME_SIZE 4550
+
+#define RX_LOW_WATERMARK NUM_RECEIVE_BUFFERS / 2
+#define TX_LOW_WATERMARK NUM_TRANSMIT_BUFFERS - 2
+
+/*
+** Include the IOCTL stuff
+*/
+#include <linux/sockios.h>
+
+#define SKFPIOCTL SIOCDEVPRIVATE
+
+struct s_skfp_ioctl {
+ unsigned short cmd; /* Command to run */
+ unsigned short len; /* Length of the data buffer */
+ unsigned char __user *data; /* Pointer to the data buffer */
+};
+
+/*
+** Recognised ioctl commands for the driver
+*/
+#define SKFP_GET_STATS 0x05 /* Get the driver statistics */
+#define SKFP_CLR_STATS 0x06 /* Zero out the driver statistics */
+
+// The per-adapter driver structure
+struct s_smt_os {
+ struct net_device *dev;
+ struct net_device *next_module;
+ u32 bus_type; /* bus type (0 == PCI, 1 == EISA) */
+ struct pci_dev pdev; /* PCI device structure */
+
+ unsigned long base_addr;
+ unsigned char factory_mac_addr[8];
+ ulong SharedMemSize;
+ ulong SharedMemHeap;
+ void* SharedMemAddr;
+ dma_addr_t SharedMemDMA;
+
+ ulong QueueSkb;
+ struct sk_buff_head SendSkbQueue;
+
+ ulong MaxFrameSize;
+ u8 ResetRequested;
+
+ // MAC statistics structure
+ struct fddi_statistics MacStat;
+
+ // receive into this local buffer if no skb available
+ // data will be not valid, because multiple RxDs can
+ // point here at the same time, it must be at least
+ // MAX_FRAME_SIZE bytes in size
+ unsigned char *LocalRxBuffer;
+ dma_addr_t LocalRxBufferDMA;
+
+ // Version (required by SMT module).
+ u_long smc_version ;
+
+ // Required by Hardware Module (HWM).
+ struct hw_modul hwm ;
+
+ // For SMP-savety
+ spinlock_t DriverLock;
+
+};
+
+typedef struct s_smt_os skfddi_priv;
+
+#endif // _TARGETOS_
diff --git a/drivers/net/fddi/skfp/h/types.h b/drivers/net/fddi/skfp/h/types.h
new file mode 100644
index 000000000..5a3bf8378
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/types.h
@@ -0,0 +1,39 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#include <linux/types.h>
+/*
+ ----------------------
+ Basic SMT system types
+ ----------------------
+*/
+#ifndef _TYPES_
+#define _TYPES_
+
+#define _packed
+#ifndef far
+#define far
+#endif
+#ifndef _far
+#define _far
+#endif
+
+#define inp(p) ioread8(p)
+#define inpw(p) ioread16(p)
+#define inpd(p) ioread32(p)
+#define outp(p,c) iowrite8(c,p)
+#define outpw(p,s) iowrite16(s,p)
+#define outpd(p,l) iowrite32(l,p)
+
+#endif /* _TYPES_ */
diff --git a/drivers/net/fddi/skfp/hwmtm.c b/drivers/net/fddi/skfp/hwmtm.c
new file mode 100644
index 000000000..e26398b5a
--- /dev/null
+++ b/drivers/net/fddi/skfp/hwmtm.c
@@ -0,0 +1,2178 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef lint
+static char const ID_sccs[] = "@(#)hwmtm.c 1.40 99/05/31 (C) SK" ;
+#endif
+
+#define HWMTM
+
+#ifndef FDDI
+#define FDDI
+#endif
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#include "h/skfbiinc.h"
+
+/*
+ -------------------------------------------------------------
+ DOCUMENTATION
+ -------------------------------------------------------------
+ BEGIN_MANUAL_ENTRY(DOCUMENTATION)
+
+ T B D
+
+ END_MANUAL_ENTRY
+*/
+/*
+ -------------------------------------------------------------
+ LOCAL VARIABLES:
+ -------------------------------------------------------------
+*/
+#ifdef COMMON_MB_POOL
+static SMbuf *mb_start = 0 ;
+static SMbuf *mb_free = 0 ;
+static int mb_init = FALSE ;
+static int call_count = 0 ;
+#endif
+
+/*
+ -------------------------------------------------------------
+ EXTERNE VARIABLES:
+ -------------------------------------------------------------
+*/
+
+#ifdef DEBUG
+#ifndef DEBUG_BRD
+extern struct smt_debug debug ;
+#endif
+#endif
+
+#ifdef NDIS_OS2
+extern u_char offDepth ;
+extern u_char force_irq_pending ;
+#endif
+
+/*
+ -------------------------------------------------------------
+ LOCAL FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+static void queue_llc_rx(struct s_smc *smc, SMbuf *mb);
+static void smt_to_llc(struct s_smc *smc, SMbuf *mb);
+static void init_txd_ring(struct s_smc *smc);
+static void init_rxd_ring(struct s_smc *smc);
+static void queue_txd_mb(struct s_smc *smc, SMbuf *mb);
+static u_long init_descr_ring(struct s_smc *smc, union s_fp_descr volatile *start,
+ int count);
+static u_long repair_txd_ring(struct s_smc *smc, struct s_smt_tx_queue *queue);
+static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue);
+static SMbuf* get_llc_rx(struct s_smc *smc);
+static SMbuf* get_txd_mb(struct s_smc *smc);
+static void mac_drv_clear_txd(struct s_smc *smc);
+
+/*
+ -------------------------------------------------------------
+ EXTERNAL FUNCTIONS:
+ -------------------------------------------------------------
+*/
+/* The external SMT functions are listed in cmtdef.h */
+
+extern void* mac_drv_get_space(struct s_smc *smc, unsigned int size);
+extern void* mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size);
+extern void mac_drv_fill_rxd(struct s_smc *smc);
+extern void mac_drv_tx_complete(struct s_smc *smc,
+ volatile struct s_smt_fp_txd *txd);
+extern void mac_drv_rx_complete(struct s_smc *smc,
+ volatile struct s_smt_fp_rxd *rxd,
+ int frag_count, int len);
+extern void mac_drv_requeue_rxd(struct s_smc *smc,
+ volatile struct s_smt_fp_rxd *rxd,
+ int frag_count);
+extern void mac_drv_clear_rxd(struct s_smc *smc,
+ volatile struct s_smt_fp_rxd *rxd, int frag_count);
+
+#ifdef USE_OS_CPY
+extern void hwm_cpy_rxd2mb(void);
+extern void hwm_cpy_txd2mb(void);
+#endif
+
+#ifdef ALL_RX_COMPLETE
+extern void mac_drv_all_receives_complete(void);
+#endif
+
+extern u_long mac_drv_virt2phys(struct s_smc *smc, void *virt);
+extern u_long dma_master(struct s_smc *smc, void *virt, int len, int flag);
+
+#ifdef NDIS_OS2
+extern void post_proc(void);
+#else
+extern void dma_complete(struct s_smc *smc, volatile union s_fp_descr *descr,
+ int flag);
+#endif
+
+extern int mac_drv_rx_init(struct s_smc *smc, int len, int fc, char *look_ahead,
+ int la_len);
+
+/*
+ -------------------------------------------------------------
+ PUBLIC FUNCTIONS:
+ -------------------------------------------------------------
+*/
+void process_receive(struct s_smc *smc);
+void fddi_isr(struct s_smc *smc);
+void smt_free_mbuf(struct s_smc *smc, SMbuf *mb);
+void init_driver_fplus(struct s_smc *smc);
+void mac_drv_rx_mode(struct s_smc *smc, int mode);
+void init_fddi_driver(struct s_smc *smc, u_char *mac_addr);
+void mac_drv_clear_tx_queue(struct s_smc *smc);
+void mac_drv_clear_rx_queue(struct s_smc *smc);
+void hwm_tx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+ int frame_status);
+void hwm_rx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+ int frame_status);
+
+int mac_drv_init(struct s_smc *smc);
+int hwm_tx_init(struct s_smc *smc, u_char fc, int frag_count, int frame_len,
+ int frame_status);
+
+u_int mac_drv_check_space(void);
+
+SMbuf* smt_get_mbuf(struct s_smc *smc);
+
+#ifdef DEBUG
+ void mac_drv_debug_lev(void);
+#endif
+
+/*
+ -------------------------------------------------------------
+ MACROS:
+ -------------------------------------------------------------
+*/
+#ifndef UNUSED
+#ifdef lint
+#define UNUSED(x) (x) = (x)
+#else
+#define UNUSED(x)
+#endif
+#endif
+
+#ifdef USE_CAN_ADDR
+#define MA smc->hw.fddi_canon_addr.a
+#define GROUP_ADDR_BIT 0x01
+#else
+#define MA smc->hw.fddi_home_addr.a
+#define GROUP_ADDR_BIT 0x80
+#endif
+
+#define RXD_TXD_COUNT (HWM_ASYNC_TXD_COUNT+HWM_SYNC_TXD_COUNT+\
+ SMT_R1_RXD_COUNT+SMT_R2_RXD_COUNT)
+
+#ifdef MB_OUTSIDE_SMC
+#define EXT_VIRT_MEM ((RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd) +\
+ MAX_MBUF*sizeof(SMbuf))
+#define EXT_VIRT_MEM_2 ((RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd))
+#else
+#define EXT_VIRT_MEM ((RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd))
+#endif
+
+ /*
+ * define critical read for 16 Bit drivers
+ */
+#if defined(NDIS_OS2) || defined(ODI2)
+#define CR_READ(var) ((var) & 0xffff0000 | ((var) & 0xffff))
+#else
+#define CR_READ(var) (__le32)(var)
+#endif
+
+#define IMASK_SLOW (IS_PLINT1 | IS_PLINT2 | IS_TIMINT | IS_TOKEN | \
+ IS_MINTR1 | IS_MINTR2 | IS_MINTR3 | IS_R1_P | \
+ IS_R1_C | IS_XA_C | IS_XS_C)
+
+/*
+ -------------------------------------------------------------
+ INIT- AND SMT FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+
+/*
+ * BEGIN_MANUAL_ENTRY(mac_drv_check_space)
+ * u_int mac_drv_check_space()
+ *
+ * function DOWNCALL (drvsr.c)
+ * This function calculates the needed non virtual
+ * memory for MBufs, RxD and TxD descriptors etc.
+ * needed by the driver.
+ *
+ * return u_int memory in bytes
+ *
+ * END_MANUAL_ENTRY
+ */
+u_int mac_drv_check_space(void)
+{
+#ifdef MB_OUTSIDE_SMC
+#ifdef COMMON_MB_POOL
+ call_count++ ;
+ if (call_count == 1) {
+ return EXT_VIRT_MEM;
+ }
+ else {
+ return EXT_VIRT_MEM_2;
+ }
+#else
+ return EXT_VIRT_MEM;
+#endif
+#else
+ return 0;
+#endif
+}
+
+/*
+ * BEGIN_MANUAL_ENTRY(mac_drv_init)
+ * void mac_drv_init(smc)
+ *
+ * function DOWNCALL (drvsr.c)
+ * In this function the hardware module allocates it's
+ * memory.
+ * The operating system dependent module should call
+ * mac_drv_init once, after the adatper is detected.
+ * END_MANUAL_ENTRY
+ */
+int mac_drv_init(struct s_smc *smc)
+{
+ if (sizeof(struct s_smt_fp_rxd) % 16) {
+ SMT_PANIC(smc,HWM_E0001,HWM_E0001_MSG) ;
+ }
+ if (sizeof(struct s_smt_fp_txd) % 16) {
+ SMT_PANIC(smc,HWM_E0002,HWM_E0002_MSG) ;
+ }
+
+ /*
+ * get the required memory for the RxDs and TxDs
+ */
+ if (!(smc->os.hwm.descr_p = (union s_fp_descr volatile *)
+ mac_drv_get_desc_mem(smc,(u_int)
+ (RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd)))) {
+ return 1; /* no space the hwm modul can't work */
+ }
+
+ /*
+ * get the memory for the SMT MBufs
+ */
+#ifndef MB_OUTSIDE_SMC
+ smc->os.hwm.mbuf_pool.mb_start=(SMbuf *)(&smc->os.hwm.mbuf_pool.mb[0]) ;
+#else
+#ifndef COMMON_MB_POOL
+ if (!(smc->os.hwm.mbuf_pool.mb_start = (SMbuf *) mac_drv_get_space(smc,
+ MAX_MBUF*sizeof(SMbuf)))) {
+ return 1; /* no space the hwm modul can't work */
+ }
+#else
+ if (!mb_start) {
+ if (!(mb_start = (SMbuf *) mac_drv_get_space(smc,
+ MAX_MBUF*sizeof(SMbuf)))) {
+ return 1; /* no space the hwm modul can't work */
+ }
+ }
+#endif
+#endif
+ return 0;
+}
+
+/*
+ * BEGIN_MANUAL_ENTRY(init_driver_fplus)
+ * init_driver_fplus(smc)
+ *
+ * Sets hardware modul specific values for the mode register 2
+ * (e.g. the byte alignment for the received frames, the position of the
+ * least significant byte etc.)
+ * END_MANUAL_ENTRY
+ */
+void init_driver_fplus(struct s_smc *smc)
+{
+ smc->hw.fp.mdr2init = FM_LSB | FM_BMMODE | FM_ENNPRQ | FM_ENHSRQ | 3 ;
+
+#ifdef PCI
+ smc->hw.fp.mdr2init |= FM_CHKPAR | FM_PARITY ;
+#endif
+ smc->hw.fp.mdr3init = FM_MENRQAUNLCK | FM_MENRS ;
+
+#ifdef USE_CAN_ADDR
+ /* enable address bit swapping */
+ smc->hw.fp.frselreg_init = FM_ENXMTADSWAP | FM_ENRCVADSWAP ;
+#endif
+}
+
+static u_long init_descr_ring(struct s_smc *smc,
+ union s_fp_descr volatile *start,
+ int count)
+{
+ int i ;
+ union s_fp_descr volatile *d1 ;
+ union s_fp_descr volatile *d2 ;
+ u_long phys ;
+
+ DB_GEN("descr ring starts at = %x ",(void *)start,0,3) ;
+ for (i=count-1, d1=start; i ; i--) {
+ d2 = d1 ;
+ d1++ ; /* descr is owned by the host */
+ d2->r.rxd_rbctrl = cpu_to_le32(BMU_CHECK) ;
+ d2->r.rxd_next = &d1->r ;
+ phys = mac_drv_virt2phys(smc,(void *)d1) ;
+ d2->r.rxd_nrdadr = cpu_to_le32(phys) ;
+ }
+ DB_GEN("descr ring ends at = %x ",(void *)d1,0,3) ;
+ d1->r.rxd_rbctrl = cpu_to_le32(BMU_CHECK) ;
+ d1->r.rxd_next = &start->r ;
+ phys = mac_drv_virt2phys(smc,(void *)start) ;
+ d1->r.rxd_nrdadr = cpu_to_le32(phys) ;
+
+ for (i=count, d1=start; i ; i--) {
+ DRV_BUF_FLUSH(&d1->r,DDI_DMA_SYNC_FORDEV) ;
+ d1++;
+ }
+ return phys;
+}
+
+static void init_txd_ring(struct s_smc *smc)
+{
+ struct s_smt_fp_txd volatile *ds ;
+ struct s_smt_tx_queue *queue ;
+ u_long phys ;
+
+ /*
+ * initialize the transmit descriptors
+ */
+ ds = (struct s_smt_fp_txd volatile *) ((char *)smc->os.hwm.descr_p +
+ SMT_R1_RXD_COUNT*sizeof(struct s_smt_fp_rxd)) ;
+ queue = smc->hw.fp.tx[QUEUE_A0] ;
+ DB_GEN("Init async TxD ring, %d TxDs ",HWM_ASYNC_TXD_COUNT,0,3) ;
+ (void)init_descr_ring(smc,(union s_fp_descr volatile *)ds,
+ HWM_ASYNC_TXD_COUNT) ;
+ phys = le32_to_cpu(ds->txd_ntdadr) ;
+ ds++ ;
+ queue->tx_curr_put = queue->tx_curr_get = ds ;
+ ds-- ;
+ queue->tx_free = HWM_ASYNC_TXD_COUNT ;
+ queue->tx_used = 0 ;
+ outpd(ADDR(B5_XA_DA),phys) ;
+
+ ds = (struct s_smt_fp_txd volatile *) ((char *)ds +
+ HWM_ASYNC_TXD_COUNT*sizeof(struct s_smt_fp_txd)) ;
+ queue = smc->hw.fp.tx[QUEUE_S] ;
+ DB_GEN("Init sync TxD ring, %d TxDs ",HWM_SYNC_TXD_COUNT,0,3) ;
+ (void)init_descr_ring(smc,(union s_fp_descr volatile *)ds,
+ HWM_SYNC_TXD_COUNT) ;
+ phys = le32_to_cpu(ds->txd_ntdadr) ;
+ ds++ ;
+ queue->tx_curr_put = queue->tx_curr_get = ds ;
+ queue->tx_free = HWM_SYNC_TXD_COUNT ;
+ queue->tx_used = 0 ;
+ outpd(ADDR(B5_XS_DA),phys) ;
+}
+
+static void init_rxd_ring(struct s_smc *smc)
+{
+ struct s_smt_fp_rxd volatile *ds ;
+ struct s_smt_rx_queue *queue ;
+ u_long phys ;
+
+ /*
+ * initialize the receive descriptors
+ */
+ ds = (struct s_smt_fp_rxd volatile *) smc->os.hwm.descr_p ;
+ queue = smc->hw.fp.rx[QUEUE_R1] ;
+ DB_GEN("Init RxD ring, %d RxDs ",SMT_R1_RXD_COUNT,0,3) ;
+ (void)init_descr_ring(smc,(union s_fp_descr volatile *)ds,
+ SMT_R1_RXD_COUNT) ;
+ phys = le32_to_cpu(ds->rxd_nrdadr) ;
+ ds++ ;
+ queue->rx_curr_put = queue->rx_curr_get = ds ;
+ queue->rx_free = SMT_R1_RXD_COUNT ;
+ queue->rx_used = 0 ;
+ outpd(ADDR(B4_R1_DA),phys) ;
+}
+
+/*
+ * BEGIN_MANUAL_ENTRY(init_fddi_driver)
+ * void init_fddi_driver(smc,mac_addr)
+ *
+ * initializes the driver and it's variables
+ *
+ * END_MANUAL_ENTRY
+ */
+void init_fddi_driver(struct s_smc *smc, u_char *mac_addr)
+{
+ SMbuf *mb ;
+ int i ;
+
+ init_board(smc,mac_addr) ;
+ (void)init_fplus(smc) ;
+
+ /*
+ * initialize the SMbufs for the SMT
+ */
+#ifndef COMMON_MB_POOL
+ mb = smc->os.hwm.mbuf_pool.mb_start ;
+ smc->os.hwm.mbuf_pool.mb_free = (SMbuf *)NULL ;
+ for (i = 0; i < MAX_MBUF; i++) {
+ mb->sm_use_count = 1 ;
+ smt_free_mbuf(smc,mb) ;
+ mb++ ;
+ }
+#else
+ mb = mb_start ;
+ if (!mb_init) {
+ mb_free = 0 ;
+ for (i = 0; i < MAX_MBUF; i++) {
+ mb->sm_use_count = 1 ;
+ smt_free_mbuf(smc,mb) ;
+ mb++ ;
+ }
+ mb_init = TRUE ;
+ }
+#endif
+
+ /*
+ * initialize the other variables
+ */
+ smc->os.hwm.llc_rx_pipe = smc->os.hwm.llc_rx_tail = (SMbuf *)NULL ;
+ smc->os.hwm.txd_tx_pipe = smc->os.hwm.txd_tx_tail = NULL ;
+ smc->os.hwm.pass_SMT = smc->os.hwm.pass_NSA = smc->os.hwm.pass_DB = 0 ;
+ smc->os.hwm.pass_llc_promisc = TRUE ;
+ smc->os.hwm.queued_rx_frames = smc->os.hwm.queued_txd_mb = 0 ;
+ smc->os.hwm.detec_count = 0 ;
+ smc->os.hwm.rx_break = 0 ;
+ smc->os.hwm.rx_len_error = 0 ;
+ smc->os.hwm.isr_flag = FALSE ;
+
+ /*
+ * make sure that the start pointer is 16 byte aligned
+ */
+ i = 16 - ((long)smc->os.hwm.descr_p & 0xf) ;
+ if (i != 16) {
+ DB_GEN("i = %d",i,0,3) ;
+ smc->os.hwm.descr_p = (union s_fp_descr volatile *)
+ ((char *)smc->os.hwm.descr_p+i) ;
+ }
+ DB_GEN("pt to descr area = %x",(void *)smc->os.hwm.descr_p,0,3) ;
+
+ init_txd_ring(smc) ;
+ init_rxd_ring(smc) ;
+ mac_drv_fill_rxd(smc) ;
+
+ init_plc(smc) ;
+}
+
+
+SMbuf *smt_get_mbuf(struct s_smc *smc)
+{
+ register SMbuf *mb ;
+
+#ifndef COMMON_MB_POOL
+ mb = smc->os.hwm.mbuf_pool.mb_free ;
+#else
+ mb = mb_free ;
+#endif
+ if (mb) {
+#ifndef COMMON_MB_POOL
+ smc->os.hwm.mbuf_pool.mb_free = mb->sm_next ;
+#else
+ mb_free = mb->sm_next ;
+#endif
+ mb->sm_off = 8 ;
+ mb->sm_use_count = 1 ;
+ }
+ DB_GEN("get SMbuf: mb = %x",(void *)mb,0,3) ;
+ return mb; /* May be NULL */
+}
+
+void smt_free_mbuf(struct s_smc *smc, SMbuf *mb)
+{
+
+ if (mb) {
+ mb->sm_use_count-- ;
+ DB_GEN("free_mbuf: sm_use_count = %d",mb->sm_use_count,0,3) ;
+ /*
+ * If the use_count is != zero the MBuf is queued
+ * more than once and must not queued into the
+ * free MBuf queue
+ */
+ if (!mb->sm_use_count) {
+ DB_GEN("free SMbuf: mb = %x",(void *)mb,0,3) ;
+#ifndef COMMON_MB_POOL
+ mb->sm_next = smc->os.hwm.mbuf_pool.mb_free ;
+ smc->os.hwm.mbuf_pool.mb_free = mb ;
+#else
+ mb->sm_next = mb_free ;
+ mb_free = mb ;
+#endif
+ }
+ }
+ else
+ SMT_PANIC(smc,HWM_E0003,HWM_E0003_MSG) ;
+}
+
+
+/*
+ * BEGIN_MANUAL_ENTRY(mac_drv_repair_descr)
+ * void mac_drv_repair_descr(smc)
+ *
+ * function called from SMT (HWM / hwmtm.c)
+ * The BMU is idle when this function is called.
+ * Mac_drv_repair_descr sets up the physical address
+ * for all receive and transmit queues where the BMU
+ * should continue.
+ * It may be that the BMU was reseted during a fragmented
+ * transfer. In this case there are some fragments which will
+ * never completed by the BMU. The OWN bit of this fragments
+ * must be switched to be owned by the host.
+ *
+ * Give a start command to the receive BMU.
+ * Start the transmit BMUs if transmit frames pending.
+ *
+ * END_MANUAL_ENTRY
+ */
+void mac_drv_repair_descr(struct s_smc *smc)
+{
+ u_long phys ;
+
+ if (smc->hw.hw_state != STOPPED) {
+ SK_BREAK() ;
+ SMT_PANIC(smc,HWM_E0013,HWM_E0013_MSG) ;
+ return ;
+ }
+
+ /*
+ * repair tx queues: don't start
+ */
+ phys = repair_txd_ring(smc,smc->hw.fp.tx[QUEUE_A0]) ;
+ outpd(ADDR(B5_XA_DA),phys) ;
+ if (smc->hw.fp.tx_q[QUEUE_A0].tx_used) {
+ outpd(ADDR(B0_XA_CSR),CSR_START) ;
+ }
+ phys = repair_txd_ring(smc,smc->hw.fp.tx[QUEUE_S]) ;
+ outpd(ADDR(B5_XS_DA),phys) ;
+ if (smc->hw.fp.tx_q[QUEUE_S].tx_used) {
+ outpd(ADDR(B0_XS_CSR),CSR_START) ;
+ }
+
+ /*
+ * repair rx queues
+ */
+ phys = repair_rxd_ring(smc,smc->hw.fp.rx[QUEUE_R1]) ;
+ outpd(ADDR(B4_R1_DA),phys) ;
+ outpd(ADDR(B0_R1_CSR),CSR_START) ;
+}
+
+static u_long repair_txd_ring(struct s_smc *smc, struct s_smt_tx_queue *queue)
+{
+ int i ;
+ int tx_used ;
+ u_long phys ;
+ u_long tbctrl ;
+ struct s_smt_fp_txd volatile *t ;
+
+ SK_UNUSED(smc) ;
+
+ t = queue->tx_curr_get ;
+ tx_used = queue->tx_used ;
+ for (i = tx_used+queue->tx_free-1 ; i ; i-- ) {
+ t = t->txd_next ;
+ }
+ phys = le32_to_cpu(t->txd_ntdadr) ;
+
+ t = queue->tx_curr_get ;
+ while (tx_used) {
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORCPU) ;
+ tbctrl = le32_to_cpu(t->txd_tbctrl) ;
+
+ if (tbctrl & BMU_OWN) {
+ if (tbctrl & BMU_STF) {
+ break ; /* exit the loop */
+ }
+ else {
+ /*
+ * repair the descriptor
+ */
+ t->txd_tbctrl &= ~cpu_to_le32(BMU_OWN) ;
+ }
+ }
+ phys = le32_to_cpu(t->txd_ntdadr) ;
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+ t = t->txd_next ;
+ tx_used-- ;
+ }
+ return phys;
+}
+
+/*
+ * Repairs the receive descriptor ring and returns the physical address
+ * where the BMU should continue working.
+ *
+ * o The physical address where the BMU was stopped has to be
+ * determined. This is the next RxD after rx_curr_get with an OWN
+ * bit set.
+ * o The BMU should start working at beginning of the next frame.
+ * RxDs with an OWN bit set but with a reset STF bit should be
+ * skipped and owned by the driver (OWN = 0).
+ */
+static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue)
+{
+ int i ;
+ int rx_used ;
+ u_long phys ;
+ u_long rbctrl ;
+ struct s_smt_fp_rxd volatile *r ;
+
+ SK_UNUSED(smc) ;
+
+ r = queue->rx_curr_get ;
+ rx_used = queue->rx_used ;
+ for (i = SMT_R1_RXD_COUNT-1 ; i ; i-- ) {
+ r = r->rxd_next ;
+ }
+ phys = le32_to_cpu(r->rxd_nrdadr) ;
+
+ r = queue->rx_curr_get ;
+ while (rx_used) {
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+ rbctrl = le32_to_cpu(r->rxd_rbctrl) ;
+
+ if (rbctrl & BMU_OWN) {
+ if (rbctrl & BMU_STF) {
+ break ; /* exit the loop */
+ }
+ else {
+ /*
+ * repair the descriptor
+ */
+ r->rxd_rbctrl &= ~cpu_to_le32(BMU_OWN) ;
+ }
+ }
+ phys = le32_to_cpu(r->rxd_nrdadr) ;
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+ r = r->rxd_next ;
+ rx_used-- ;
+ }
+ return phys;
+}
+
+
+/*
+ -------------------------------------------------------------
+ INTERRUPT SERVICE ROUTINE:
+ -------------------------------------------------------------
+*/
+
+/*
+ * BEGIN_MANUAL_ENTRY(fddi_isr)
+ * void fddi_isr(smc)
+ *
+ * function DOWNCALL (drvsr.c)
+ * interrupt service routine, handles the interrupt requests
+ * generated by the FDDI adapter.
+ *
+ * NOTE: The operating system dependent module must guarantee that the
+ * interrupts of the adapter are disabled when it calls fddi_isr.
+ *
+ * About the USE_BREAK_ISR mechanismn:
+ *
+ * The main requirement of this mechanismn is to force an timer IRQ when
+ * leaving process_receive() with leave_isr set. process_receive() may
+ * be called at any time from anywhere!
+ * To be sure we don't miss such event we set 'force_irq' per default.
+ * We have to force and Timer IRQ if 'smc->os.hwm.leave_isr' AND
+ * 'force_irq' are set. 'force_irq' may be reset if a receive complete
+ * IRQ is pending.
+ *
+ * END_MANUAL_ENTRY
+ */
+void fddi_isr(struct s_smc *smc)
+{
+ u_long is ; /* ISR source */
+ u_short stu, stl ;
+ SMbuf *mb ;
+
+#ifdef USE_BREAK_ISR
+ int force_irq ;
+#endif
+
+#ifdef ODI2
+ if (smc->os.hwm.rx_break) {
+ mac_drv_fill_rxd(smc) ;
+ if (smc->hw.fp.rx_q[QUEUE_R1].rx_used > 0) {
+ smc->os.hwm.rx_break = 0 ;
+ process_receive(smc) ;
+ }
+ else {
+ smc->os.hwm.detec_count = 0 ;
+ smt_force_irq(smc) ;
+ }
+ }
+#endif
+ smc->os.hwm.isr_flag = TRUE ;
+
+#ifdef USE_BREAK_ISR
+ force_irq = TRUE ;
+ if (smc->os.hwm.leave_isr) {
+ smc->os.hwm.leave_isr = FALSE ;
+ process_receive(smc) ;
+ }
+#endif
+
+ while ((is = GET_ISR() & ISR_MASK)) {
+ NDD_TRACE("CH0B",is,0,0) ;
+ DB_GEN("ISA = 0x%x",is,0,7) ;
+
+ if (is & IMASK_SLOW) {
+ NDD_TRACE("CH1b",is,0,0) ;
+ if (is & IS_PLINT1) { /* PLC1 */
+ plc1_irq(smc) ;
+ }
+ if (is & IS_PLINT2) { /* PLC2 */
+ plc2_irq(smc) ;
+ }
+ if (is & IS_MINTR1) { /* FORMAC+ STU1(U/L) */
+ stu = inpw(FM_A(FM_ST1U)) ;
+ stl = inpw(FM_A(FM_ST1L)) ;
+ DB_GEN("Slow transmit complete",0,0,6) ;
+ mac1_irq(smc,stu,stl) ;
+ }
+ if (is & IS_MINTR2) { /* FORMAC+ STU2(U/L) */
+ stu= inpw(FM_A(FM_ST2U)) ;
+ stl= inpw(FM_A(FM_ST2L)) ;
+ DB_GEN("Slow receive complete",0,0,6) ;
+ DB_GEN("stl = %x : stu = %x",stl,stu,7) ;
+ mac2_irq(smc,stu,stl) ;
+ }
+ if (is & IS_MINTR3) { /* FORMAC+ STU3(U/L) */
+ stu= inpw(FM_A(FM_ST3U)) ;
+ stl= inpw(FM_A(FM_ST3L)) ;
+ DB_GEN("FORMAC Mode Register 3",0,0,6) ;
+ mac3_irq(smc,stu,stl) ;
+ }
+ if (is & IS_TIMINT) { /* Timer 82C54-2 */
+ timer_irq(smc) ;
+#ifdef NDIS_OS2
+ force_irq_pending = 0 ;
+#endif
+ /*
+ * out of RxD detection
+ */
+ if (++smc->os.hwm.detec_count > 4) {
+ /*
+ * check out of RxD condition
+ */
+ process_receive(smc) ;
+ }
+ }
+ if (is & IS_TOKEN) { /* Restricted Token Monitor */
+ rtm_irq(smc) ;
+ }
+ if (is & IS_R1_P) { /* Parity error rx queue 1 */
+ /* clear IRQ */
+ outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_P) ;
+ SMT_PANIC(smc,HWM_E0004,HWM_E0004_MSG) ;
+ }
+ if (is & IS_R1_C) { /* Encoding error rx queue 1 */
+ /* clear IRQ */
+ outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_C) ;
+ SMT_PANIC(smc,HWM_E0005,HWM_E0005_MSG) ;
+ }
+ if (is & IS_XA_C) { /* Encoding error async tx q */
+ /* clear IRQ */
+ outpd(ADDR(B5_XA_CSR),CSR_IRQ_CL_C) ;
+ SMT_PANIC(smc,HWM_E0006,HWM_E0006_MSG) ;
+ }
+ if (is & IS_XS_C) { /* Encoding error sync tx q */
+ /* clear IRQ */
+ outpd(ADDR(B5_XS_CSR),CSR_IRQ_CL_C) ;
+ SMT_PANIC(smc,HWM_E0007,HWM_E0007_MSG) ;
+ }
+ }
+
+ /*
+ * Fast Tx complete Async/Sync Queue (BMU service)
+ */
+ if (is & (IS_XS_F|IS_XA_F)) {
+ DB_GEN("Fast tx complete queue",0,0,6) ;
+ /*
+ * clear IRQ, Note: no IRQ is lost, because
+ * we always service both queues
+ */
+ outpd(ADDR(B5_XS_CSR),CSR_IRQ_CL_F) ;
+ outpd(ADDR(B5_XA_CSR),CSR_IRQ_CL_F) ;
+ mac_drv_clear_txd(smc) ;
+ llc_restart_tx(smc) ;
+ }
+
+ /*
+ * Fast Rx Complete (BMU service)
+ */
+ if (is & IS_R1_F) {
+ DB_GEN("Fast receive complete",0,0,6) ;
+ /* clear IRQ */
+#ifndef USE_BREAK_ISR
+ outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_F) ;
+ process_receive(smc) ;
+#else
+ process_receive(smc) ;
+ if (smc->os.hwm.leave_isr) {
+ force_irq = FALSE ;
+ } else {
+ outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_F) ;
+ process_receive(smc) ;
+ }
+#endif
+ }
+
+#ifndef NDIS_OS2
+ while ((mb = get_llc_rx(smc))) {
+ smt_to_llc(smc,mb) ;
+ }
+#else
+ if (offDepth)
+ post_proc() ;
+
+ while (!offDepth && (mb = get_llc_rx(smc))) {
+ smt_to_llc(smc,mb) ;
+ }
+
+ if (!offDepth && smc->os.hwm.rx_break) {
+ process_receive(smc) ;
+ }
+#endif
+ if (smc->q.ev_get != smc->q.ev_put) {
+ NDD_TRACE("CH2a",0,0,0) ;
+ ev_dispatcher(smc) ;
+ }
+#ifdef NDIS_OS2
+ post_proc() ;
+ if (offDepth) { /* leave fddi_isr because */
+ break ; /* indications not allowed */
+ }
+#endif
+#ifdef USE_BREAK_ISR
+ if (smc->os.hwm.leave_isr) {
+ break ; /* leave fddi_isr */
+ }
+#endif
+
+ /* NOTE: when the isr is left, no rx is pending */
+ } /* end of interrupt source polling loop */
+
+#ifdef USE_BREAK_ISR
+ if (smc->os.hwm.leave_isr && force_irq) {
+ smt_force_irq(smc) ;
+ }
+#endif
+ smc->os.hwm.isr_flag = FALSE ;
+ NDD_TRACE("CH0E",0,0,0) ;
+}
+
+
+/*
+ -------------------------------------------------------------
+ RECEIVE FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+#ifndef NDIS_OS2
+/*
+ * BEGIN_MANUAL_ENTRY(mac_drv_rx_mode)
+ * void mac_drv_rx_mode(smc,mode)
+ *
+ * function DOWNCALL (fplus.c)
+ * Corresponding to the parameter mode, the operating system
+ * dependent module can activate several receive modes.
+ *
+ * para mode = 1: RX_ENABLE_ALLMULTI enable all multicasts
+ * = 2: RX_DISABLE_ALLMULTI disable "enable all multicasts"
+ * = 3: RX_ENABLE_PROMISC enable promiscuous
+ * = 4: RX_DISABLE_PROMISC disable promiscuous
+ * = 5: RX_ENABLE_NSA enable rec. of all NSA frames
+ * (disabled after 'driver reset' & 'set station address')
+ * = 6: RX_DISABLE_NSA disable rec. of all NSA frames
+ *
+ * = 21: RX_ENABLE_PASS_SMT ( see description )
+ * = 22: RX_DISABLE_PASS_SMT ( " " )
+ * = 23: RX_ENABLE_PASS_NSA ( " " )
+ * = 24: RX_DISABLE_PASS_NSA ( " " )
+ * = 25: RX_ENABLE_PASS_DB ( " " )
+ * = 26: RX_DISABLE_PASS_DB ( " " )
+ * = 27: RX_DISABLE_PASS_ALL ( " " )
+ * = 28: RX_DISABLE_LLC_PROMISC ( " " )
+ * = 29: RX_ENABLE_LLC_PROMISC ( " " )
+ *
+ *
+ * RX_ENABLE_PASS_SMT / RX_DISABLE_PASS_SMT
+ *
+ * If the operating system dependent module activates the
+ * mode RX_ENABLE_PASS_SMT, the hardware module
+ * duplicates all SMT frames with the frame control
+ * FC_SMT_INFO and passes them to the LLC receive channel
+ * by calling mac_drv_rx_init.
+ * The SMT Frames which are sent by the local SMT and the NSA
+ * frames whose A- and C-Indicator is not set are also duplicated
+ * and passed.
+ * The receive mode RX_DISABLE_PASS_SMT disables the passing
+ * of SMT frames.
+ *
+ * RX_ENABLE_PASS_NSA / RX_DISABLE_PASS_NSA
+ *
+ * If the operating system dependent module activates the
+ * mode RX_ENABLE_PASS_NSA, the hardware module
+ * duplicates all NSA frames with frame control FC_SMT_NSA
+ * and a set A-Indicator and passed them to the LLC
+ * receive channel by calling mac_drv_rx_init.
+ * All NSA Frames which are sent by the local SMT
+ * are also duplicated and passed.
+ * The receive mode RX_DISABLE_PASS_NSA disables the passing
+ * of NSA frames with the A- or C-Indicator set.
+ *
+ * NOTE: For fear that the hardware module receives NSA frames with
+ * a reset A-Indicator, the operating system dependent module
+ * has to call mac_drv_rx_mode with the mode RX_ENABLE_NSA
+ * before activate the RX_ENABLE_PASS_NSA mode and after every
+ * 'driver reset' and 'set station address'.
+ *
+ * RX_ENABLE_PASS_DB / RX_DISABLE_PASS_DB
+ *
+ * If the operating system dependent module activates the
+ * mode RX_ENABLE_PASS_DB, direct BEACON frames
+ * (FC_BEACON frame control) are passed to the LLC receive
+ * channel by mac_drv_rx_init.
+ * The receive mode RX_DISABLE_PASS_DB disables the passing
+ * of direct BEACON frames.
+ *
+ * RX_DISABLE_PASS_ALL
+ *
+ * Disables all special receives modes. It is equal to
+ * call mac_drv_set_rx_mode successively with the
+ * parameters RX_DISABLE_NSA, RX_DISABLE_PASS_SMT,
+ * RX_DISABLE_PASS_NSA and RX_DISABLE_PASS_DB.
+ *
+ * RX_ENABLE_LLC_PROMISC
+ *
+ * (default) all received LLC frames and all SMT/NSA/DBEACON
+ * frames depending on the attitude of the flags
+ * PASS_SMT/PASS_NSA/PASS_DBEACON will be delivered to the
+ * LLC layer
+ *
+ * RX_DISABLE_LLC_PROMISC
+ *
+ * all received SMT/NSA/DBEACON frames depending on the
+ * attitude of the flags PASS_SMT/PASS_NSA/PASS_DBEACON
+ * will be delivered to the LLC layer.
+ * all received LLC frames with a directed address, Multicast
+ * or Broadcast address will be delivered to the LLC
+ * layer too.
+ *
+ * END_MANUAL_ENTRY
+ */
+void mac_drv_rx_mode(struct s_smc *smc, int mode)
+{
+ switch(mode) {
+ case RX_ENABLE_PASS_SMT:
+ smc->os.hwm.pass_SMT = TRUE ;
+ break ;
+ case RX_DISABLE_PASS_SMT:
+ smc->os.hwm.pass_SMT = FALSE ;
+ break ;
+ case RX_ENABLE_PASS_NSA:
+ smc->os.hwm.pass_NSA = TRUE ;
+ break ;
+ case RX_DISABLE_PASS_NSA:
+ smc->os.hwm.pass_NSA = FALSE ;
+ break ;
+ case RX_ENABLE_PASS_DB:
+ smc->os.hwm.pass_DB = TRUE ;
+ break ;
+ case RX_DISABLE_PASS_DB:
+ smc->os.hwm.pass_DB = FALSE ;
+ break ;
+ case RX_DISABLE_PASS_ALL:
+ smc->os.hwm.pass_SMT = smc->os.hwm.pass_NSA = FALSE ;
+ smc->os.hwm.pass_DB = FALSE ;
+ smc->os.hwm.pass_llc_promisc = TRUE ;
+ mac_set_rx_mode(smc,RX_DISABLE_NSA) ;
+ break ;
+ case RX_DISABLE_LLC_PROMISC:
+ smc->os.hwm.pass_llc_promisc = FALSE ;
+ break ;
+ case RX_ENABLE_LLC_PROMISC:
+ smc->os.hwm.pass_llc_promisc = TRUE ;
+ break ;
+ case RX_ENABLE_ALLMULTI:
+ case RX_DISABLE_ALLMULTI:
+ case RX_ENABLE_PROMISC:
+ case RX_DISABLE_PROMISC:
+ case RX_ENABLE_NSA:
+ case RX_DISABLE_NSA:
+ default:
+ mac_set_rx_mode(smc,mode) ;
+ break ;
+ }
+}
+#endif /* ifndef NDIS_OS2 */
+
+/*
+ * process receive queue
+ */
+void process_receive(struct s_smc *smc)
+{
+ int i ;
+ int n ;
+ int frag_count ; /* number of RxDs of the curr rx buf */
+ int used_frags ; /* number of RxDs of the curr frame */
+ struct s_smt_rx_queue *queue ; /* points to the queue ctl struct */
+ struct s_smt_fp_rxd volatile *r ; /* rxd pointer */
+ struct s_smt_fp_rxd volatile *rxd ; /* first rxd of rx frame */
+ u_long rbctrl ; /* receive buffer control word */
+ u_long rfsw ; /* receive frame status word */
+ u_short rx_used ;
+ u_char far *virt ;
+ char far *data ;
+ SMbuf *mb ;
+ u_char fc ; /* Frame control */
+ int len ; /* Frame length */
+
+ smc->os.hwm.detec_count = 0 ;
+ queue = smc->hw.fp.rx[QUEUE_R1] ;
+ NDD_TRACE("RHxB",0,0,0) ;
+ for ( ; ; ) {
+ r = queue->rx_curr_get ;
+ rx_used = queue->rx_used ;
+ frag_count = 0 ;
+
+#ifdef USE_BREAK_ISR
+ if (smc->os.hwm.leave_isr) {
+ goto rx_end ;
+ }
+#endif
+#ifdef NDIS_OS2
+ if (offDepth) {
+ smc->os.hwm.rx_break = 1 ;
+ goto rx_end ;
+ }
+ smc->os.hwm.rx_break = 0 ;
+#endif
+#ifdef ODI2
+ if (smc->os.hwm.rx_break) {
+ goto rx_end ;
+ }
+#endif
+ n = 0 ;
+ do {
+ DB_RX("Check RxD %x for OWN and EOF",(void *)r,0,5) ;
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+ rbctrl = le32_to_cpu(CR_READ(r->rxd_rbctrl));
+
+ if (rbctrl & BMU_OWN) {
+ NDD_TRACE("RHxE",r,rfsw,rbctrl) ;
+ DB_RX("End of RxDs",0,0,4) ;
+ goto rx_end ;
+ }
+ /*
+ * out of RxD detection
+ */
+ if (!rx_used) {
+ SK_BREAK() ;
+ SMT_PANIC(smc,HWM_E0009,HWM_E0009_MSG) ;
+ /* Either we don't have an RxD or all
+ * RxDs are filled. Therefore it's allowed
+ * for to set the STOPPED flag */
+ smc->hw.hw_state = STOPPED ;
+ mac_drv_clear_rx_queue(smc) ;
+ smc->hw.hw_state = STARTED ;
+ mac_drv_fill_rxd(smc) ;
+ smc->os.hwm.detec_count = 0 ;
+ goto rx_end ;
+ }
+ rfsw = le32_to_cpu(r->rxd_rfsw) ;
+ if ((rbctrl & BMU_STF) != ((rbctrl & BMU_ST_BUF) <<5)) {
+ /*
+ * The BMU_STF bit is deleted, 1 frame is
+ * placed into more than 1 rx buffer
+ *
+ * skip frame by setting the rx len to 0
+ *
+ * if fragment count == 0
+ * The missing STF bit belongs to the
+ * current frame, search for the
+ * EOF bit to complete the frame
+ * else
+ * the fragment belongs to the next frame,
+ * exit the loop and process the frame
+ */
+ SK_BREAK() ;
+ rfsw = 0 ;
+ if (frag_count) {
+ break ;
+ }
+ }
+ n += rbctrl & 0xffff ;
+ r = r->rxd_next ;
+ frag_count++ ;
+ rx_used-- ;
+ } while (!(rbctrl & BMU_EOF)) ;
+ used_frags = frag_count ;
+ DB_RX("EOF set in RxD, used_frags = %d ",used_frags,0,5) ;
+
+ /* may be next 2 DRV_BUF_FLUSH() can be skipped, because */
+ /* BMU_ST_BUF will not be changed by the ASIC */
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+ while (rx_used && !(r->rxd_rbctrl & cpu_to_le32(BMU_ST_BUF))) {
+ DB_RX("Check STF bit in %x",(void *)r,0,5) ;
+ r = r->rxd_next ;
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+ frag_count++ ;
+ rx_used-- ;
+ }
+ DB_RX("STF bit found",0,0,5) ;
+
+ /*
+ * The received frame is finished for the process receive
+ */
+ rxd = queue->rx_curr_get ;
+ queue->rx_curr_get = r ;
+ queue->rx_free += frag_count ;
+ queue->rx_used = rx_used ;
+
+ /*
+ * ASIC Errata no. 7 (STF - Bit Bug)
+ */
+ rxd->rxd_rbctrl &= cpu_to_le32(~BMU_STF) ;
+
+ for (r=rxd, i=frag_count ; i ; r=r->rxd_next, i--){
+ DB_RX("dma_complete for RxD %x",(void *)r,0,5) ;
+ dma_complete(smc,(union s_fp_descr volatile *)r,DMA_WR);
+ }
+ smc->hw.fp.err_stats.err_valid++ ;
+ smc->mib.m[MAC0].fddiMACCopied_Ct++ ;
+
+ /* the length of the data including the FC */
+ len = (rfsw & RD_LENGTH) - 4 ;
+
+ DB_RX("frame length = %d",len,0,4) ;
+ /*
+ * check the frame_length and all error flags
+ */
+ if (rfsw & (RX_MSRABT|RX_FS_E|RX_FS_CRC|RX_FS_IMPL)){
+ if (rfsw & RD_S_MSRABT) {
+ DB_RX("Frame aborted by the FORMAC",0,0,2) ;
+ smc->hw.fp.err_stats.err_abort++ ;
+ }
+ /*
+ * check frame status
+ */
+ if (rfsw & RD_S_SEAC2) {
+ DB_RX("E-Indicator set",0,0,2) ;
+ smc->hw.fp.err_stats.err_e_indicator++ ;
+ }
+ if (rfsw & RD_S_SFRMERR) {
+ DB_RX("CRC error",0,0,2) ;
+ smc->hw.fp.err_stats.err_crc++ ;
+ }
+ if (rfsw & RX_FS_IMPL) {
+ DB_RX("Implementer frame",0,0,2) ;
+ smc->hw.fp.err_stats.err_imp_frame++ ;
+ }
+ goto abort_frame ;
+ }
+ if (len > FDDI_RAW_MTU-4) {
+ DB_RX("Frame too long error",0,0,2) ;
+ smc->hw.fp.err_stats.err_too_long++ ;
+ goto abort_frame ;
+ }
+ /*
+ * SUPERNET 3 Bug: FORMAC delivers status words
+ * of aborded frames to the BMU
+ */
+ if (len <= 4) {
+ DB_RX("Frame length = 0",0,0,2) ;
+ goto abort_frame ;
+ }
+
+ if (len != (n-4)) {
+ DB_RX("BMU: rx len differs: [%d:%d]",len,n,4);
+ smc->os.hwm.rx_len_error++ ;
+ goto abort_frame ;
+ }
+
+ /*
+ * Check SA == MA
+ */
+ virt = (u_char far *) rxd->rxd_virt ;
+ DB_RX("FC = %x",*virt,0,2) ;
+ if (virt[12] == MA[5] &&
+ virt[11] == MA[4] &&
+ virt[10] == MA[3] &&
+ virt[9] == MA[2] &&
+ virt[8] == MA[1] &&
+ (virt[7] & ~GROUP_ADDR_BIT) == MA[0]) {
+ goto abort_frame ;
+ }
+
+ /*
+ * test if LLC frame
+ */
+ if (rfsw & RX_FS_LLC) {
+ /*
+ * if pass_llc_promisc is disable
+ * if DA != Multicast or Broadcast or DA!=MA
+ * abort the frame
+ */
+ if (!smc->os.hwm.pass_llc_promisc) {
+ if(!(virt[1] & GROUP_ADDR_BIT)) {
+ if (virt[6] != MA[5] ||
+ virt[5] != MA[4] ||
+ virt[4] != MA[3] ||
+ virt[3] != MA[2] ||
+ virt[2] != MA[1] ||
+ virt[1] != MA[0]) {
+ DB_RX("DA != MA and not multi- or broadcast",0,0,2) ;
+ goto abort_frame ;
+ }
+ }
+ }
+
+ /*
+ * LLC frame received
+ */
+ DB_RX("LLC - receive",0,0,4) ;
+ mac_drv_rx_complete(smc,rxd,frag_count,len) ;
+ }
+ else {
+ if (!(mb = smt_get_mbuf(smc))) {
+ smc->hw.fp.err_stats.err_no_buf++ ;
+ DB_RX("No SMbuf; receive terminated",0,0,4) ;
+ goto abort_frame ;
+ }
+ data = smtod(mb,char *) - 1 ;
+
+ /*
+ * copy the frame into a SMT_MBuf
+ */
+#ifdef USE_OS_CPY
+ hwm_cpy_rxd2mb(rxd,data,len) ;
+#else
+ for (r=rxd, i=used_frags ; i ; r=r->rxd_next, i--){
+ n = le32_to_cpu(r->rxd_rbctrl) & RD_LENGTH ;
+ DB_RX("cp SMT frame to mb: len = %d",n,0,6) ;
+ memcpy(data,r->rxd_virt,n) ;
+ data += n ;
+ }
+ data = smtod(mb,char *) - 1 ;
+#endif
+ fc = *(char *)mb->sm_data = *data ;
+ mb->sm_len = len - 1 ; /* len - fc */
+ data++ ;
+
+ /*
+ * SMT frame received
+ */
+ switch(fc) {
+ case FC_SMT_INFO :
+ smc->hw.fp.err_stats.err_smt_frame++ ;
+ DB_RX("SMT frame received ",0,0,5) ;
+
+ if (smc->os.hwm.pass_SMT) {
+ DB_RX("pass SMT frame ",0,0,5) ;
+ mac_drv_rx_complete(smc, rxd,
+ frag_count,len) ;
+ }
+ else {
+ DB_RX("requeue RxD",0,0,5) ;
+ mac_drv_requeue_rxd(smc,rxd,frag_count);
+ }
+
+ smt_received_pack(smc,mb,(int)(rfsw>>25)) ;
+ break ;
+ case FC_SMT_NSA :
+ smc->hw.fp.err_stats.err_smt_frame++ ;
+ DB_RX("SMT frame received ",0,0,5) ;
+
+ /* if pass_NSA set pass the NSA frame or */
+ /* pass_SMT set and the A-Indicator */
+ /* is not set, pass the NSA frame */
+ if (smc->os.hwm.pass_NSA ||
+ (smc->os.hwm.pass_SMT &&
+ !(rfsw & A_INDIC))) {
+ DB_RX("pass SMT frame ",0,0,5) ;
+ mac_drv_rx_complete(smc, rxd,
+ frag_count,len) ;
+ }
+ else {
+ DB_RX("requeue RxD",0,0,5) ;
+ mac_drv_requeue_rxd(smc,rxd,frag_count);
+ }
+
+ smt_received_pack(smc,mb,(int)(rfsw>>25)) ;
+ break ;
+ case FC_BEACON :
+ if (smc->os.hwm.pass_DB) {
+ DB_RX("pass DB frame ",0,0,5) ;
+ mac_drv_rx_complete(smc, rxd,
+ frag_count,len) ;
+ }
+ else {
+ DB_RX("requeue RxD",0,0,5) ;
+ mac_drv_requeue_rxd(smc,rxd,frag_count);
+ }
+ smt_free_mbuf(smc,mb) ;
+ break ;
+ default :
+ /*
+ * unknown FC abord the frame
+ */
+ DB_RX("unknown FC error",0,0,2) ;
+ smt_free_mbuf(smc,mb) ;
+ DB_RX("requeue RxD",0,0,5) ;
+ mac_drv_requeue_rxd(smc,rxd,frag_count) ;
+ if ((fc & 0xf0) == FC_MAC)
+ smc->hw.fp.err_stats.err_mac_frame++ ;
+ else
+ smc->hw.fp.err_stats.err_imp_frame++ ;
+
+ break ;
+ }
+ }
+
+ DB_RX("next RxD is %x ",queue->rx_curr_get,0,3) ;
+ NDD_TRACE("RHx1",queue->rx_curr_get,0,0) ;
+
+ continue ;
+ /*--------------------------------------------------------------------*/
+abort_frame:
+ DB_RX("requeue RxD",0,0,5) ;
+ mac_drv_requeue_rxd(smc,rxd,frag_count) ;
+
+ DB_RX("next RxD is %x ",queue->rx_curr_get,0,3) ;
+ NDD_TRACE("RHx2",queue->rx_curr_get,0,0) ;
+ }
+rx_end:
+#ifdef ALL_RX_COMPLETE
+ mac_drv_all_receives_complete(smc) ;
+#endif
+ return ; /* lint bug: needs return detect end of function */
+}
+
+static void smt_to_llc(struct s_smc *smc, SMbuf *mb)
+{
+ u_char fc ;
+
+ DB_RX("send a queued frame to the llc layer",0,0,4) ;
+ smc->os.hwm.r.len = mb->sm_len ;
+ smc->os.hwm.r.mb_pos = smtod(mb,char *) ;
+ fc = *smc->os.hwm.r.mb_pos ;
+ (void)mac_drv_rx_init(smc,(int)mb->sm_len,(int)fc,
+ smc->os.hwm.r.mb_pos,(int)mb->sm_len) ;
+ smt_free_mbuf(smc,mb) ;
+}
+
+/*
+ * BEGIN_MANUAL_ENTRY(hwm_rx_frag)
+ * void hwm_rx_frag(smc,virt,phys,len,frame_status)
+ *
+ * function MACRO (hardware module, hwmtm.h)
+ * This function calls dma_master for preparing the
+ * system hardware for the DMA transfer and initializes
+ * the current RxD with the length and the physical and
+ * virtual address of the fragment. Furthermore, it sets the
+ * STF and EOF bits depending on the frame status byte,
+ * switches the OWN flag of the RxD, so that it is owned by the
+ * adapter and issues an rx_start.
+ *
+ * para virt virtual pointer to the fragment
+ * len the length of the fragment
+ * frame_status status of the frame, see design description
+ *
+ * NOTE: It is possible to call this function with a fragment length
+ * of zero.
+ *
+ * END_MANUAL_ENTRY
+ */
+void hwm_rx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+ int frame_status)
+{
+ struct s_smt_fp_rxd volatile *r ;
+ __le32 rbctrl;
+
+ NDD_TRACE("RHfB",virt,len,frame_status) ;
+ DB_RX("hwm_rx_frag: len = %d, frame_status = %x\n",len,frame_status,2) ;
+ r = smc->hw.fp.rx_q[QUEUE_R1].rx_curr_put ;
+ r->rxd_virt = virt ;
+ r->rxd_rbadr = cpu_to_le32(phys) ;
+ rbctrl = cpu_to_le32( (((__u32)frame_status &
+ (FIRST_FRAG|LAST_FRAG))<<26) |
+ (((u_long) frame_status & FIRST_FRAG) << 21) |
+ BMU_OWN | BMU_CHECK | BMU_EN_IRQ_EOF | len) ;
+ r->rxd_rbctrl = rbctrl ;
+
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+ outpd(ADDR(B0_R1_CSR),CSR_START) ;
+ smc->hw.fp.rx_q[QUEUE_R1].rx_free-- ;
+ smc->hw.fp.rx_q[QUEUE_R1].rx_used++ ;
+ smc->hw.fp.rx_q[QUEUE_R1].rx_curr_put = r->rxd_next ;
+ NDD_TRACE("RHfE",r,le32_to_cpu(r->rxd_rbadr),0) ;
+}
+
+/*
+ * BEGINN_MANUAL_ENTRY(mac_drv_clear_rx_queue)
+ *
+ * void mac_drv_clear_rx_queue(smc)
+ * struct s_smc *smc ;
+ *
+ * function DOWNCALL (hardware module, hwmtm.c)
+ * mac_drv_clear_rx_queue is called by the OS-specific module
+ * after it has issued a card_stop.
+ * In this case, the frames in the receive queue are obsolete and
+ * should be removed. For removing mac_drv_clear_rx_queue
+ * calls dma_master for each RxD and mac_drv_clear_rxd for each
+ * receive buffer.
+ *
+ * NOTE: calling sequence card_stop:
+ * CLI_FBI(), card_stop(),
+ * mac_drv_clear_tx_queue(), mac_drv_clear_rx_queue(),
+ *
+ * NOTE: The caller is responsible that the BMUs are idle
+ * when this function is called.
+ *
+ * END_MANUAL_ENTRY
+ */
+void mac_drv_clear_rx_queue(struct s_smc *smc)
+{
+ struct s_smt_fp_rxd volatile *r ;
+ struct s_smt_fp_rxd volatile *next_rxd ;
+ struct s_smt_rx_queue *queue ;
+ int frag_count ;
+ int i ;
+
+ if (smc->hw.hw_state != STOPPED) {
+ SK_BREAK() ;
+ SMT_PANIC(smc,HWM_E0012,HWM_E0012_MSG) ;
+ return ;
+ }
+
+ queue = smc->hw.fp.rx[QUEUE_R1] ;
+ DB_RX("clear_rx_queue",0,0,5) ;
+
+ /*
+ * dma_complete and mac_drv_clear_rxd for all RxDs / receive buffers
+ */
+ r = queue->rx_curr_get ;
+ while (queue->rx_used) {
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+ DB_RX("switch OWN bit of RxD 0x%x ",r,0,5) ;
+ r->rxd_rbctrl &= ~cpu_to_le32(BMU_OWN) ;
+ frag_count = 1 ;
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+ r = r->rxd_next ;
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+ while (r != queue->rx_curr_put &&
+ !(r->rxd_rbctrl & cpu_to_le32(BMU_ST_BUF))) {
+ DB_RX("Check STF bit in %x",(void *)r,0,5) ;
+ r->rxd_rbctrl &= ~cpu_to_le32(BMU_OWN) ;
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+ r = r->rxd_next ;
+ DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+ frag_count++ ;
+ }
+ DB_RX("STF bit found",0,0,5) ;
+ next_rxd = r ;
+
+ for (r=queue->rx_curr_get,i=frag_count; i ; r=r->rxd_next,i--){
+ DB_RX("dma_complete for RxD %x",(void *)r,0,5) ;
+ dma_complete(smc,(union s_fp_descr volatile *)r,DMA_WR);
+ }
+
+ DB_RX("mac_drv_clear_rxd: RxD %x frag_count %d ",
+ (void *)queue->rx_curr_get,frag_count,5) ;
+ mac_drv_clear_rxd(smc,queue->rx_curr_get,frag_count) ;
+
+ queue->rx_curr_get = next_rxd ;
+ queue->rx_used -= frag_count ;
+ queue->rx_free += frag_count ;
+ }
+}
+
+
+/*
+ -------------------------------------------------------------
+ SEND FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+/*
+ * BEGIN_MANUAL_ENTRY(hwm_tx_init)
+ * int hwm_tx_init(smc,fc,frag_count,frame_len,frame_status)
+ *
+ * function DOWN_CALL (hardware module, hwmtm.c)
+ * hwm_tx_init checks if the frame can be sent through the
+ * corresponding send queue.
+ *
+ * para fc the frame control. To determine through which
+ * send queue the frame should be transmitted.
+ * 0x50 - 0x57: asynchronous LLC frame
+ * 0xD0 - 0xD7: synchronous LLC frame
+ * 0x41, 0x4F: SMT frame to the network
+ * 0x42: SMT frame to the network and to the local SMT
+ * 0x43: SMT frame to the local SMT
+ * frag_count count of the fragments for this frame
+ * frame_len length of the frame
+ * frame_status status of the frame, the send queue bit is already
+ * specified
+ *
+ * return frame_status
+ *
+ * END_MANUAL_ENTRY
+ */
+int hwm_tx_init(struct s_smc *smc, u_char fc, int frag_count, int frame_len,
+ int frame_status)
+{
+ NDD_TRACE("THiB",fc,frag_count,frame_len) ;
+ smc->os.hwm.tx_p = smc->hw.fp.tx[frame_status & QUEUE_A0] ;
+ smc->os.hwm.tx_descr = TX_DESCRIPTOR | (((u_long)(frame_len-1)&3)<<27) ;
+ smc->os.hwm.tx_len = frame_len ;
+ DB_TX("hwm_tx_init: fc = %x, len = %d",fc,frame_len,3) ;
+ if ((fc & ~(FC_SYNC_BIT|FC_LLC_PRIOR)) == FC_ASYNC_LLC) {
+ frame_status |= LAN_TX ;
+ }
+ else {
+ switch (fc) {
+ case FC_SMT_INFO :
+ case FC_SMT_NSA :
+ frame_status |= LAN_TX ;
+ break ;
+ case FC_SMT_LOC :
+ frame_status |= LOC_TX ;
+ break ;
+ case FC_SMT_LAN_LOC :
+ frame_status |= LAN_TX | LOC_TX ;
+ break ;
+ default :
+ SMT_PANIC(smc,HWM_E0010,HWM_E0010_MSG) ;
+ }
+ }
+ if (!smc->hw.mac_ring_is_up) {
+ frame_status &= ~LAN_TX ;
+ frame_status |= RING_DOWN ;
+ DB_TX("Ring is down: terminate LAN_TX",0,0,2) ;
+ }
+ if (frag_count > smc->os.hwm.tx_p->tx_free) {
+#ifndef NDIS_OS2
+ mac_drv_clear_txd(smc) ;
+ if (frag_count > smc->os.hwm.tx_p->tx_free) {
+ DB_TX("Out of TxDs, terminate LAN_TX",0,0,2) ;
+ frame_status &= ~LAN_TX ;
+ frame_status |= OUT_OF_TXD ;
+ }
+#else
+ DB_TX("Out of TxDs, terminate LAN_TX",0,0,2) ;
+ frame_status &= ~LAN_TX ;
+ frame_status |= OUT_OF_TXD ;
+#endif
+ }
+ DB_TX("frame_status = %x",frame_status,0,3) ;
+ NDD_TRACE("THiE",frame_status,smc->os.hwm.tx_p->tx_free,0) ;
+ return frame_status;
+}
+
+/*
+ * BEGIN_MANUAL_ENTRY(hwm_tx_frag)
+ * void hwm_tx_frag(smc,virt,phys,len,frame_status)
+ *
+ * function DOWNCALL (hardware module, hwmtm.c)
+ * If the frame should be sent to the LAN, this function calls
+ * dma_master, fills the current TxD with the virtual and the
+ * physical address, sets the STF and EOF bits dependent on
+ * the frame status, and requests the BMU to start the
+ * transmit.
+ * If the frame should be sent to the local SMT, an SMT_MBuf
+ * is allocated if the FIRST_FRAG bit is set in the frame_status.
+ * The fragment of the frame is copied into the SMT MBuf.
+ * The function smt_received_pack is called if the LAST_FRAG
+ * bit is set in the frame_status word.
+ *
+ * para virt virtual pointer to the fragment
+ * len the length of the fragment
+ * frame_status status of the frame, see design description
+ *
+ * return nothing returned, no parameter is modified
+ *
+ * NOTE: It is possible to invoke this macro with a fragment length
+ * of zero.
+ *
+ * END_MANUAL_ENTRY
+ */
+void hwm_tx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+ int frame_status)
+{
+ struct s_smt_fp_txd volatile *t ;
+ struct s_smt_tx_queue *queue ;
+ __le32 tbctrl ;
+
+ queue = smc->os.hwm.tx_p ;
+
+ NDD_TRACE("THfB",virt,len,frame_status) ;
+ /* Bug fix: AF / May 31 1999 (#missing)
+ * snmpinfo problem reported by IBM is caused by invalid
+ * t-pointer (txd) if LAN_TX is not set but LOC_TX only.
+ * Set: t = queue->tx_curr_put here !
+ */
+ t = queue->tx_curr_put ;
+
+ DB_TX("hwm_tx_frag: len = %d, frame_status = %x ",len,frame_status,2) ;
+ if (frame_status & LAN_TX) {
+ /* '*t' is already defined */
+ DB_TX("LAN_TX: TxD = %x, virt = %x ",t,virt,3) ;
+ t->txd_virt = virt ;
+ t->txd_txdscr = cpu_to_le32(smc->os.hwm.tx_descr) ;
+ t->txd_tbadr = cpu_to_le32(phys) ;
+ tbctrl = cpu_to_le32((((__u32)frame_status &
+ (FIRST_FRAG|LAST_FRAG|EN_IRQ_EOF))<< 26) |
+ BMU_OWN|BMU_CHECK |len) ;
+ t->txd_tbctrl = tbctrl ;
+
+#ifndef AIX
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+ outpd(queue->tx_bmu_ctl,CSR_START) ;
+#else /* ifndef AIX */
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+ if (frame_status & QUEUE_A0) {
+ outpd(ADDR(B0_XA_CSR),CSR_START) ;
+ }
+ else {
+ outpd(ADDR(B0_XS_CSR),CSR_START) ;
+ }
+#endif
+ queue->tx_free-- ;
+ queue->tx_used++ ;
+ queue->tx_curr_put = t->txd_next ;
+ if (frame_status & LAST_FRAG) {
+ smc->mib.m[MAC0].fddiMACTransmit_Ct++ ;
+ }
+ }
+ if (frame_status & LOC_TX) {
+ DB_TX("LOC_TX: ",0,0,3) ;
+ if (frame_status & FIRST_FRAG) {
+ if(!(smc->os.hwm.tx_mb = smt_get_mbuf(smc))) {
+ smc->hw.fp.err_stats.err_no_buf++ ;
+ DB_TX("No SMbuf; transmit terminated",0,0,4) ;
+ }
+ else {
+ smc->os.hwm.tx_data =
+ smtod(smc->os.hwm.tx_mb,char *) - 1 ;
+#ifdef USE_OS_CPY
+#ifdef PASS_1ST_TXD_2_TX_COMP
+ hwm_cpy_txd2mb(t,smc->os.hwm.tx_data,
+ smc->os.hwm.tx_len) ;
+#endif
+#endif
+ }
+ }
+ if (smc->os.hwm.tx_mb) {
+#ifndef USE_OS_CPY
+ DB_TX("copy fragment into MBuf ",0,0,3) ;
+ memcpy(smc->os.hwm.tx_data,virt,len) ;
+ smc->os.hwm.tx_data += len ;
+#endif
+ if (frame_status & LAST_FRAG) {
+#ifdef USE_OS_CPY
+#ifndef PASS_1ST_TXD_2_TX_COMP
+ /*
+ * hwm_cpy_txd2mb(txd,data,len) copies 'len'
+ * bytes from the virtual pointer in 'rxd'
+ * to 'data'. The virtual pointer of the
+ * os-specific tx-buffer should be written
+ * in the LAST txd.
+ */
+ hwm_cpy_txd2mb(t,smc->os.hwm.tx_data,
+ smc->os.hwm.tx_len) ;
+#endif /* nPASS_1ST_TXD_2_TX_COMP */
+#endif /* USE_OS_CPY */
+ smc->os.hwm.tx_data =
+ smtod(smc->os.hwm.tx_mb,char *) - 1 ;
+ *(char *)smc->os.hwm.tx_mb->sm_data =
+ *smc->os.hwm.tx_data ;
+ smc->os.hwm.tx_data++ ;
+ smc->os.hwm.tx_mb->sm_len =
+ smc->os.hwm.tx_len - 1 ;
+ DB_TX("pass LLC frame to SMT ",0,0,3) ;
+ smt_received_pack(smc,smc->os.hwm.tx_mb,
+ RD_FS_LOCAL) ;
+ }
+ }
+ }
+ NDD_TRACE("THfE",t,queue->tx_free,0) ;
+}
+
+
+/*
+ * queues a receive for later send
+ */
+static void queue_llc_rx(struct s_smc *smc, SMbuf *mb)
+{
+ DB_GEN("queue_llc_rx: mb = %x",(void *)mb,0,4) ;
+ smc->os.hwm.queued_rx_frames++ ;
+ mb->sm_next = (SMbuf *)NULL ;
+ if (smc->os.hwm.llc_rx_pipe == NULL) {
+ smc->os.hwm.llc_rx_pipe = mb ;
+ }
+ else {
+ smc->os.hwm.llc_rx_tail->sm_next = mb ;
+ }
+ smc->os.hwm.llc_rx_tail = mb ;
+
+ /*
+ * force an timer IRQ to receive the data
+ */
+ if (!smc->os.hwm.isr_flag) {
+ smt_force_irq(smc) ;
+ }
+}
+
+/*
+ * get a SMbuf from the llc_rx_queue
+ */
+static SMbuf *get_llc_rx(struct s_smc *smc)
+{
+ SMbuf *mb ;
+
+ if ((mb = smc->os.hwm.llc_rx_pipe)) {
+ smc->os.hwm.queued_rx_frames-- ;
+ smc->os.hwm.llc_rx_pipe = mb->sm_next ;
+ }
+ DB_GEN("get_llc_rx: mb = 0x%x",(void *)mb,0,4) ;
+ return mb;
+}
+
+/*
+ * queues a transmit SMT MBuf during the time were the MBuf is
+ * queued the TxD ring
+ */
+static void queue_txd_mb(struct s_smc *smc, SMbuf *mb)
+{
+ DB_GEN("_rx: queue_txd_mb = %x",(void *)mb,0,4) ;
+ smc->os.hwm.queued_txd_mb++ ;
+ mb->sm_next = (SMbuf *)NULL ;
+ if (smc->os.hwm.txd_tx_pipe == NULL) {
+ smc->os.hwm.txd_tx_pipe = mb ;
+ }
+ else {
+ smc->os.hwm.txd_tx_tail->sm_next = mb ;
+ }
+ smc->os.hwm.txd_tx_tail = mb ;
+}
+
+/*
+ * get a SMbuf from the txd_tx_queue
+ */
+static SMbuf *get_txd_mb(struct s_smc *smc)
+{
+ SMbuf *mb ;
+
+ if ((mb = smc->os.hwm.txd_tx_pipe)) {
+ smc->os.hwm.queued_txd_mb-- ;
+ smc->os.hwm.txd_tx_pipe = mb->sm_next ;
+ }
+ DB_GEN("get_txd_mb: mb = 0x%x",(void *)mb,0,4) ;
+ return mb;
+}
+
+/*
+ * SMT Send function
+ */
+void smt_send_mbuf(struct s_smc *smc, SMbuf *mb, int fc)
+{
+ char far *data ;
+ int len ;
+ int n ;
+ int i ;
+ int frag_count ;
+ int frame_status ;
+ SK_LOC_DECL(char far,*virt[3]) ;
+ int frag_len[3] ;
+ struct s_smt_tx_queue *queue ;
+ struct s_smt_fp_txd volatile *t ;
+ u_long phys ;
+ __le32 tbctrl;
+
+ NDD_TRACE("THSB",mb,fc,0) ;
+ DB_TX("smt_send_mbuf: mb = 0x%x, fc = 0x%x",mb,fc,4) ;
+
+ mb->sm_off-- ; /* set to fc */
+ mb->sm_len++ ; /* + fc */
+ data = smtod(mb,char *) ;
+ *data = fc ;
+ if (fc == FC_SMT_LOC)
+ *data = FC_SMT_INFO ;
+
+ /*
+ * determine the frag count and the virt addresses of the frags
+ */
+ frag_count = 0 ;
+ len = mb->sm_len ;
+ while (len) {
+ n = SMT_PAGESIZE - ((long)data & (SMT_PAGESIZE-1)) ;
+ if (n >= len) {
+ n = len ;
+ }
+ DB_TX("frag: virt/len = 0x%x/%d ",(void *)data,n,5) ;
+ virt[frag_count] = data ;
+ frag_len[frag_count] = n ;
+ frag_count++ ;
+ len -= n ;
+ data += n ;
+ }
+
+ /*
+ * determine the frame status
+ */
+ queue = smc->hw.fp.tx[QUEUE_A0] ;
+ if (fc == FC_BEACON || fc == FC_SMT_LOC) {
+ frame_status = LOC_TX ;
+ }
+ else {
+ frame_status = LAN_TX ;
+ if ((smc->os.hwm.pass_NSA &&(fc == FC_SMT_NSA)) ||
+ (smc->os.hwm.pass_SMT &&(fc == FC_SMT_INFO)))
+ frame_status |= LOC_TX ;
+ }
+
+ if (!smc->hw.mac_ring_is_up || frag_count > queue->tx_free) {
+ frame_status &= ~LAN_TX;
+ if (frame_status) {
+ DB_TX("Ring is down: terminate LAN_TX",0,0,2) ;
+ }
+ else {
+ DB_TX("Ring is down: terminate transmission",0,0,2) ;
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+ }
+ DB_TX("frame_status = 0x%x ",frame_status,0,5) ;
+
+ if ((frame_status & LAN_TX) && (frame_status & LOC_TX)) {
+ mb->sm_use_count = 2 ;
+ }
+
+ if (frame_status & LAN_TX) {
+ t = queue->tx_curr_put ;
+ frame_status |= FIRST_FRAG ;
+ for (i = 0; i < frag_count; i++) {
+ DB_TX("init TxD = 0x%x",(void *)t,0,5) ;
+ if (i == frag_count-1) {
+ frame_status |= LAST_FRAG ;
+ t->txd_txdscr = cpu_to_le32(TX_DESCRIPTOR |
+ (((__u32)(mb->sm_len-1)&3) << 27)) ;
+ }
+ t->txd_virt = virt[i] ;
+ phys = dma_master(smc, (void far *)virt[i],
+ frag_len[i], DMA_RD|SMT_BUF) ;
+ t->txd_tbadr = cpu_to_le32(phys) ;
+ tbctrl = cpu_to_le32((((__u32)frame_status &
+ (FIRST_FRAG|LAST_FRAG)) << 26) |
+ BMU_OWN | BMU_CHECK | BMU_SMT_TX |frag_len[i]) ;
+ t->txd_tbctrl = tbctrl ;
+#ifndef AIX
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+ outpd(queue->tx_bmu_ctl,CSR_START) ;
+#else
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+ outpd(ADDR(B0_XA_CSR),CSR_START) ;
+#endif
+ frame_status &= ~FIRST_FRAG ;
+ queue->tx_curr_put = t = t->txd_next ;
+ queue->tx_free-- ;
+ queue->tx_used++ ;
+ }
+ smc->mib.m[MAC0].fddiMACTransmit_Ct++ ;
+ queue_txd_mb(smc,mb) ;
+ }
+
+ if (frame_status & LOC_TX) {
+ DB_TX("pass Mbuf to LLC queue",0,0,5) ;
+ queue_llc_rx(smc,mb) ;
+ }
+
+ /*
+ * We need to unqueue the free SMT_MBUFs here, because it may
+ * be that the SMT want's to send more than 1 frame for one down call
+ */
+ mac_drv_clear_txd(smc) ;
+ NDD_TRACE("THSE",t,queue->tx_free,frag_count) ;
+}
+
+/* BEGIN_MANUAL_ENTRY(mac_drv_clear_txd)
+ * void mac_drv_clear_txd(smc)
+ *
+ * function DOWNCALL (hardware module, hwmtm.c)
+ * mac_drv_clear_txd searches in both send queues for TxD's
+ * which were finished by the adapter. It calls dma_complete
+ * for each TxD. If the last fragment of an LLC frame is
+ * reached, it calls mac_drv_tx_complete to release the
+ * send buffer.
+ *
+ * return nothing
+ *
+ * END_MANUAL_ENTRY
+ */
+static void mac_drv_clear_txd(struct s_smc *smc)
+{
+ struct s_smt_tx_queue *queue ;
+ struct s_smt_fp_txd volatile *t1 ;
+ struct s_smt_fp_txd volatile *t2 = NULL ;
+ SMbuf *mb ;
+ u_long tbctrl ;
+ int i ;
+ int frag_count ;
+ int n ;
+
+ NDD_TRACE("THcB",0,0,0) ;
+ for (i = QUEUE_S; i <= QUEUE_A0; i++) {
+ queue = smc->hw.fp.tx[i] ;
+ t1 = queue->tx_curr_get ;
+ DB_TX("clear_txd: QUEUE = %d (0=sync/1=async)",i,0,5) ;
+
+ for ( ; ; ) {
+ frag_count = 0 ;
+
+ do {
+ DRV_BUF_FLUSH(t1,DDI_DMA_SYNC_FORCPU) ;
+ DB_TX("check OWN/EOF bit of TxD 0x%x",t1,0,5) ;
+ tbctrl = le32_to_cpu(CR_READ(t1->txd_tbctrl));
+
+ if (tbctrl & BMU_OWN || !queue->tx_used){
+ DB_TX("End of TxDs queue %d",i,0,4) ;
+ goto free_next_queue ; /* next queue */
+ }
+ t1 = t1->txd_next ;
+ frag_count++ ;
+ } while (!(tbctrl & BMU_EOF)) ;
+
+ t1 = queue->tx_curr_get ;
+ for (n = frag_count; n; n--) {
+ tbctrl = le32_to_cpu(t1->txd_tbctrl) ;
+ dma_complete(smc,
+ (union s_fp_descr volatile *) t1,
+ (int) (DMA_RD |
+ ((tbctrl & BMU_SMT_TX) >> 18))) ;
+ t2 = t1 ;
+ t1 = t1->txd_next ;
+ }
+
+ if (tbctrl & BMU_SMT_TX) {
+ mb = get_txd_mb(smc) ;
+ smt_free_mbuf(smc,mb) ;
+ }
+ else {
+#ifndef PASS_1ST_TXD_2_TX_COMP
+ DB_TX("mac_drv_tx_comp for TxD 0x%x",t2,0,4) ;
+ mac_drv_tx_complete(smc,t2) ;
+#else
+ DB_TX("mac_drv_tx_comp for TxD 0x%x",
+ queue->tx_curr_get,0,4) ;
+ mac_drv_tx_complete(smc,queue->tx_curr_get) ;
+#endif
+ }
+ queue->tx_curr_get = t1 ;
+ queue->tx_free += frag_count ;
+ queue->tx_used -= frag_count ;
+ }
+free_next_queue: ;
+ }
+ NDD_TRACE("THcE",0,0,0) ;
+}
+
+/*
+ * BEGINN_MANUAL_ENTRY(mac_drv_clear_tx_queue)
+ *
+ * void mac_drv_clear_tx_queue(smc)
+ * struct s_smc *smc ;
+ *
+ * function DOWNCALL (hardware module, hwmtm.c)
+ * mac_drv_clear_tx_queue is called from the SMT when
+ * the RMT state machine has entered the ISOLATE state.
+ * This function is also called by the os-specific module
+ * after it has called the function card_stop().
+ * In this case, the frames in the send queues are obsolete and
+ * should be removed.
+ *
+ * note calling sequence:
+ * CLI_FBI(), card_stop(),
+ * mac_drv_clear_tx_queue(), mac_drv_clear_rx_queue(),
+ *
+ * NOTE: The caller is responsible that the BMUs are idle
+ * when this function is called.
+ *
+ * END_MANUAL_ENTRY
+ */
+void mac_drv_clear_tx_queue(struct s_smc *smc)
+{
+ struct s_smt_fp_txd volatile *t ;
+ struct s_smt_tx_queue *queue ;
+ int tx_used ;
+ int i ;
+
+ if (smc->hw.hw_state != STOPPED) {
+ SK_BREAK() ;
+ SMT_PANIC(smc,HWM_E0011,HWM_E0011_MSG) ;
+ return ;
+ }
+
+ for (i = QUEUE_S; i <= QUEUE_A0; i++) {
+ queue = smc->hw.fp.tx[i] ;
+ DB_TX("clear_tx_queue: QUEUE = %d (0=sync/1=async)",i,0,5) ;
+
+ /*
+ * switch the OWN bit of all pending frames to the host
+ */
+ t = queue->tx_curr_get ;
+ tx_used = queue->tx_used ;
+ while (tx_used) {
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORCPU) ;
+ DB_TX("switch OWN bit of TxD 0x%x ",t,0,5) ;
+ t->txd_tbctrl &= ~cpu_to_le32(BMU_OWN) ;
+ DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+ t = t->txd_next ;
+ tx_used-- ;
+ }
+ }
+
+ /*
+ * release all TxD's for both send queues
+ */
+ mac_drv_clear_txd(smc) ;
+
+ for (i = QUEUE_S; i <= QUEUE_A0; i++) {
+ queue = smc->hw.fp.tx[i] ;
+ t = queue->tx_curr_get ;
+
+ /*
+ * write the phys pointer of the NEXT descriptor into the
+ * BMU's current address descriptor pointer and set
+ * tx_curr_get and tx_curr_put to this position
+ */
+ if (i == QUEUE_S) {
+ outpd(ADDR(B5_XS_DA),le32_to_cpu(t->txd_ntdadr)) ;
+ }
+ else {
+ outpd(ADDR(B5_XA_DA),le32_to_cpu(t->txd_ntdadr)) ;
+ }
+
+ queue->tx_curr_put = queue->tx_curr_get->txd_next ;
+ queue->tx_curr_get = queue->tx_curr_put ;
+ }
+}
+
+
+/*
+ -------------------------------------------------------------
+ TEST FUNCTIONS:
+ -------------------------------------------------------------
+*/
+
+#ifdef DEBUG
+/*
+ * BEGIN_MANUAL_ENTRY(mac_drv_debug_lev)
+ * void mac_drv_debug_lev(smc,flag,lev)
+ *
+ * function DOWNCALL (drvsr.c)
+ * To get a special debug info the user can assign a debug level
+ * to any debug flag.
+ *
+ * para flag debug flag, possible values are:
+ * = 0: reset all debug flags (the defined level is
+ * ignored)
+ * = 1: debug.d_smtf
+ * = 2: debug.d_smt
+ * = 3: debug.d_ecm
+ * = 4: debug.d_rmt
+ * = 5: debug.d_cfm
+ * = 6: debug.d_pcm
+ *
+ * = 10: debug.d_os.hwm_rx (hardware module receive path)
+ * = 11: debug.d_os.hwm_tx(hardware module transmit path)
+ * = 12: debug.d_os.hwm_gen(hardware module general flag)
+ *
+ * lev debug level
+ *
+ * END_MANUAL_ENTRY
+ */
+void mac_drv_debug_lev(struct s_smc *smc, int flag, int lev)
+{
+ switch(flag) {
+ case (int)NULL:
+ DB_P.d_smtf = DB_P.d_smt = DB_P.d_ecm = DB_P.d_rmt = 0 ;
+ DB_P.d_cfm = 0 ;
+ DB_P.d_os.hwm_rx = DB_P.d_os.hwm_tx = DB_P.d_os.hwm_gen = 0 ;
+#ifdef SBA
+ DB_P.d_sba = 0 ;
+#endif
+#ifdef ESS
+ DB_P.d_ess = 0 ;
+#endif
+ break ;
+ case DEBUG_SMTF:
+ DB_P.d_smtf = lev ;
+ break ;
+ case DEBUG_SMT:
+ DB_P.d_smt = lev ;
+ break ;
+ case DEBUG_ECM:
+ DB_P.d_ecm = lev ;
+ break ;
+ case DEBUG_RMT:
+ DB_P.d_rmt = lev ;
+ break ;
+ case DEBUG_CFM:
+ DB_P.d_cfm = lev ;
+ break ;
+ case DEBUG_PCM:
+ DB_P.d_pcm = lev ;
+ break ;
+ case DEBUG_SBA:
+#ifdef SBA
+ DB_P.d_sba = lev ;
+#endif
+ break ;
+ case DEBUG_ESS:
+#ifdef ESS
+ DB_P.d_ess = lev ;
+#endif
+ break ;
+ case DB_HWM_RX:
+ DB_P.d_os.hwm_rx = lev ;
+ break ;
+ case DB_HWM_TX:
+ DB_P.d_os.hwm_tx = lev ;
+ break ;
+ case DB_HWM_GEN:
+ DB_P.d_os.hwm_gen = lev ;
+ break ;
+ default:
+ break ;
+ }
+}
+#endif
diff --git a/drivers/net/fddi/skfp/hwt.c b/drivers/net/fddi/skfp/hwt.c
new file mode 100644
index 000000000..c0798fd2c
--- /dev/null
+++ b/drivers/net/fddi/skfp/hwt.c
@@ -0,0 +1,269 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * Timer Driver for FBI board (timer chip 82C54)
+ */
+
+/*
+ * Modifications:
+ *
+ * 28-Jun-1994 sw Edit v1.6.
+ * MCA: Added support for the SK-NET FDDI-FM2 adapter. The
+ * following functions have been added(+) or modified(*):
+ * hwt_start(*), hwt_stop(*), hwt_restart(*), hwt_read(*)
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)hwt.c 1.13 97/04/23 (C) SK " ;
+#endif
+
+/*
+ * Prototypes of local functions.
+ */
+/* 28-Jun-1994 sw - Note: hwt_restart() is also used in module 'drvfbi.c'. */
+/*static void hwt_restart() ; */
+
+/************************
+ *
+ * hwt_start
+ *
+ * Start hardware timer (clock ticks are 16us).
+ *
+ * void hwt_start(
+ * struct s_smc *smc,
+ * u_long time) ;
+ * In
+ * smc - A pointer to the SMT Context structure.
+ *
+ * time - The time in units of 16us to load the timer with.
+ * Out
+ * Nothing.
+ *
+ ************************/
+#define HWT_MAX (65000)
+
+void hwt_start(struct s_smc *smc, u_long time)
+{
+ u_short cnt ;
+
+ if (time > HWT_MAX)
+ time = HWT_MAX ;
+
+ smc->hw.t_start = time ;
+ smc->hw.t_stop = 0L ;
+
+ cnt = (u_short)time ;
+ /*
+ * if time < 16 us
+ * time = 16 us
+ */
+ if (!cnt)
+ cnt++ ;
+
+ outpd(ADDR(B2_TI_INI), (u_long) cnt * 200) ; /* Load timer value. */
+ outpw(ADDR(B2_TI_CRTL), TIM_START) ; /* Start timer. */
+
+ smc->hw.timer_activ = TRUE ;
+}
+
+/************************
+ *
+ * hwt_stop
+ *
+ * Stop hardware timer.
+ *
+ * void hwt_stop(
+ * struct s_smc *smc) ;
+ * In
+ * smc - A pointer to the SMT Context structure.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void hwt_stop(struct s_smc *smc)
+{
+ outpw(ADDR(B2_TI_CRTL), TIM_STOP) ;
+ outpw(ADDR(B2_TI_CRTL), TIM_CL_IRQ) ;
+
+ smc->hw.timer_activ = FALSE ;
+}
+
+/************************
+ *
+ * hwt_init
+ *
+ * Initialize hardware timer.
+ *
+ * void hwt_init(
+ * struct s_smc *smc) ;
+ * In
+ * smc - A pointer to the SMT Context structure.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void hwt_init(struct s_smc *smc)
+{
+ smc->hw.t_start = 0 ;
+ smc->hw.t_stop = 0 ;
+ smc->hw.timer_activ = FALSE ;
+
+ hwt_restart(smc) ;
+}
+
+/************************
+ *
+ * hwt_restart
+ *
+ * Clear timer interrupt.
+ *
+ * void hwt_restart(
+ * struct s_smc *smc) ;
+ * In
+ * smc - A pointer to the SMT Context structure.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void hwt_restart(struct s_smc *smc)
+{
+ hwt_stop(smc) ;
+}
+
+/************************
+ *
+ * hwt_read
+ *
+ * Stop hardware timer and read time elapsed since last start.
+ *
+ * u_long hwt_read(smc) ;
+ * In
+ * smc - A pointer to the SMT Context structure.
+ * Out
+ * The elapsed time since last start in units of 16us.
+ *
+ ************************/
+u_long hwt_read(struct s_smc *smc)
+{
+ u_short tr ;
+ u_long is ;
+
+ if (smc->hw.timer_activ) {
+ hwt_stop(smc) ;
+ tr = (u_short)((inpd(ADDR(B2_TI_VAL))/200) & 0xffff) ;
+
+ is = GET_ISR() ;
+ /* Check if timer expired (or wraparound). */
+ if ((tr > smc->hw.t_start) || (is & IS_TIMINT)) {
+ hwt_restart(smc) ;
+ smc->hw.t_stop = smc->hw.t_start ;
+ }
+ else
+ smc->hw.t_stop = smc->hw.t_start - tr ;
+ }
+ return smc->hw.t_stop;
+}
+
+#ifdef PCI
+/************************
+ *
+ * hwt_quick_read
+ *
+ * Stop hardware timer and read timer value and start the timer again.
+ *
+ * u_long hwt_read(smc) ;
+ * In
+ * smc - A pointer to the SMT Context structure.
+ * Out
+ * current timer value in units of 80ns.
+ *
+ ************************/
+u_long hwt_quick_read(struct s_smc *smc)
+{
+ u_long interval ;
+ u_long time ;
+
+ interval = inpd(ADDR(B2_TI_INI)) ;
+ outpw(ADDR(B2_TI_CRTL), TIM_STOP) ;
+ time = inpd(ADDR(B2_TI_VAL)) ;
+ outpd(ADDR(B2_TI_INI),time) ;
+ outpw(ADDR(B2_TI_CRTL), TIM_START) ;
+ outpd(ADDR(B2_TI_INI),interval) ;
+
+ return time;
+}
+
+/************************
+ *
+ * hwt_wait_time(smc,start,duration)
+ *
+ * This function returnes after the amount of time is elapsed
+ * since the start time.
+ *
+ * para start start time
+ * duration time to wait
+ *
+ * NOTE: The function will return immediately, if the timer is not
+ * started
+ ************************/
+void hwt_wait_time(struct s_smc *smc, u_long start, long int duration)
+{
+ long diff ;
+ long interval ;
+ int wrapped ;
+
+ /*
+ * check if timer is running
+ */
+ if (smc->hw.timer_activ == FALSE ||
+ hwt_quick_read(smc) == hwt_quick_read(smc)) {
+ return ;
+ }
+
+ interval = inpd(ADDR(B2_TI_INI)) ;
+ if (interval > duration) {
+ do {
+ diff = (long)(start - hwt_quick_read(smc)) ;
+ if (diff < 0) {
+ diff += interval ;
+ }
+ } while (diff <= duration) ;
+ }
+ else {
+ diff = interval ;
+ wrapped = 0 ;
+ do {
+ if (!wrapped) {
+ if (hwt_quick_read(smc) >= start) {
+ diff += interval ;
+ wrapped = 1 ;
+ }
+ }
+ else {
+ if (hwt_quick_read(smc) < start) {
+ wrapped = 0 ;
+ }
+ }
+ } while (diff <= duration) ;
+ }
+}
+#endif
+
diff --git a/drivers/net/fddi/skfp/pcmplc.c b/drivers/net/fddi/skfp/pcmplc.c
new file mode 100644
index 000000000..88d02d0a4
--- /dev/null
+++ b/drivers/net/fddi/skfp/pcmplc.c
@@ -0,0 +1,2014 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ PCM
+ Physical Connection Management
+*/
+
+/*
+ * Hardware independent state machine implemantation
+ * The following external SMT functions are referenced :
+ *
+ * queue_event()
+ * smt_timer_start()
+ * smt_timer_stop()
+ *
+ * The following external HW dependent functions are referenced :
+ * sm_pm_control()
+ * sm_ph_linestate()
+ * sm_pm_ls_latch()
+ *
+ * The following HW dependent events are required :
+ * PC_QLS
+ * PC_ILS
+ * PC_HLS
+ * PC_MLS
+ * PC_NSE
+ * PC_LEM
+ *
+ */
+
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)pcmplc.c 2.55 99/08/05 (C) SK " ;
+#endif
+
+#ifdef FDDI_MIB
+extern int snmp_fddi_trap(
+#ifdef ANSIC
+struct s_smc * smc, int type, int index
+#endif
+);
+#endif
+#ifdef CONCENTRATOR
+extern int plc_is_installed(
+#ifdef ANSIC
+struct s_smc *smc ,
+int p
+#endif
+) ;
+#endif
+/*
+ * FSM Macros
+ */
+#define AFLAG (0x20)
+#define GO_STATE(x) (mib->fddiPORTPCMState = (x)|AFLAG)
+#define ACTIONS_DONE() (mib->fddiPORTPCMState &= ~AFLAG)
+#define ACTIONS(x) (x|AFLAG)
+
+/*
+ * PCM states
+ */
+#define PC0_OFF 0
+#define PC1_BREAK 1
+#define PC2_TRACE 2
+#define PC3_CONNECT 3
+#define PC4_NEXT 4
+#define PC5_SIGNAL 5
+#define PC6_JOIN 6
+#define PC7_VERIFY 7
+#define PC8_ACTIVE 8
+#define PC9_MAINT 9
+
+#ifdef DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const pcm_states[] = {
+ "PC0_OFF","PC1_BREAK","PC2_TRACE","PC3_CONNECT","PC4_NEXT",
+ "PC5_SIGNAL","PC6_JOIN","PC7_VERIFY","PC8_ACTIVE","PC9_MAINT"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const pcm_events[] = {
+ "NONE","PC_START","PC_STOP","PC_LOOP","PC_JOIN","PC_SIGNAL",
+ "PC_REJECT","PC_MAINT","PC_TRACE","PC_PDR",
+ "PC_ENABLE","PC_DISABLE",
+ "PC_QLS","PC_ILS","PC_MLS","PC_HLS","PC_LS_PDR","PC_LS_NONE",
+ "PC_TIMEOUT_TB_MAX","PC_TIMEOUT_TB_MIN",
+ "PC_TIMEOUT_C_MIN","PC_TIMEOUT_T_OUT",
+ "PC_TIMEOUT_TL_MIN","PC_TIMEOUT_T_NEXT","PC_TIMEOUT_LCT",
+ "PC_NSE","PC_LEM"
+} ;
+#endif
+
+#ifdef MOT_ELM
+/*
+ * PCL-S control register
+ * this register in the PLC-S controls the scrambling parameters
+ */
+#define PLCS_CONTROL_C_U 0
+#define PLCS_CONTROL_C_S (PL_C_SDOFF_ENABLE | PL_C_SDON_ENABLE | \
+ PL_C_CIPHER_ENABLE)
+#define PLCS_FASSERT_U 0
+#define PLCS_FASSERT_S 0xFd76 /* 52.0 us */
+#define PLCS_FDEASSERT_U 0
+#define PLCS_FDEASSERT_S 0
+#else /* nMOT_ELM */
+/*
+ * PCL-S control register
+ * this register in the PLC-S controls the scrambling parameters
+ * can be patched for ANSI compliance if standard changes
+ */
+static const u_char plcs_control_c_u[17] = "PLC_CNTRL_C_U=\0\0" ;
+static const u_char plcs_control_c_s[17] = "PLC_CNTRL_C_S=\01\02" ;
+
+#define PLCS_CONTROL_C_U (plcs_control_c_u[14] | (plcs_control_c_u[15]<<8))
+#define PLCS_CONTROL_C_S (plcs_control_c_s[14] | (plcs_control_c_s[15]<<8))
+#endif /* nMOT_ELM */
+
+/*
+ * external vars
+ */
+/* struct definition see 'cmtdef.h' (also used by CFM) */
+
+#define PS_OFF 0
+#define PS_BIT3 1
+#define PS_BIT4 2
+#define PS_BIT7 3
+#define PS_LCT 4
+#define PS_BIT8 5
+#define PS_JOIN 6
+#define PS_ACTIVE 7
+
+#define LCT_LEM_MAX 255
+
+/*
+ * PLC timing parameter
+ */
+
+#define PLC_MS(m) ((int)((0x10000L-(m*100000L/2048))))
+#define SLOW_TL_MIN PLC_MS(6)
+#define SLOW_C_MIN PLC_MS(10)
+
+static const struct plt {
+ int timer ; /* relative plc timer address */
+ int para ; /* default timing parameters */
+} pltm[] = {
+ { PL_C_MIN, SLOW_C_MIN }, /* min t. to remain Connect State */
+ { PL_TL_MIN, SLOW_TL_MIN }, /* min t. to transmit a Line State */
+ { PL_TB_MIN, TP_TB_MIN }, /* min break time */
+ { PL_T_OUT, TP_T_OUT }, /* Signaling timeout */
+ { PL_LC_LENGTH, TP_LC_LENGTH }, /* Link Confidence Test Time */
+ { PL_T_SCRUB, TP_T_SCRUB }, /* Scrub Time == MAC TVX time ! */
+ { PL_NS_MAX, TP_NS_MAX }, /* max t. that noise is tolerated */
+ { 0,0 }
+} ;
+
+/*
+ * interrupt mask
+ */
+#ifdef SUPERNET_3
+/*
+ * Do we need the EBUF error during signaling, too, to detect SUPERNET_3
+ * PLL bug?
+ */
+static const int plc_imsk_na = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+ PL_PCM_ENABLED | PL_SELF_TEST | PL_EBUF_ERR;
+#else /* SUPERNET_3 */
+/*
+ * We do NOT need the elasticity buffer error during signaling.
+ */
+static int plc_imsk_na = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+ PL_PCM_ENABLED | PL_SELF_TEST ;
+#endif /* SUPERNET_3 */
+static const int plc_imsk_act = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+ PL_PCM_ENABLED | PL_SELF_TEST | PL_EBUF_ERR;
+
+/* internal functions */
+static void pcm_fsm(struct s_smc *smc, struct s_phy *phy, int cmd);
+static void pc_rcode_actions(struct s_smc *smc, int bit, struct s_phy *phy);
+static void pc_tcode_actions(struct s_smc *smc, const int bit, struct s_phy *phy);
+static void reset_lem_struct(struct s_phy *phy);
+static void plc_init(struct s_smc *smc, int p);
+static void sm_ph_lem_start(struct s_smc *smc, int np, int threshold);
+static void sm_ph_lem_stop(struct s_smc *smc, int np);
+static void sm_ph_linestate(struct s_smc *smc, int phy, int ls);
+static void real_init_plc(struct s_smc *smc);
+
+/*
+ * SMT timer interface
+ * start PCM timer 0
+ */
+static void start_pcm_timer0(struct s_smc *smc, u_long value, int event,
+ struct s_phy *phy)
+{
+ phy->timer0_exp = FALSE ; /* clear timer event flag */
+ smt_timer_start(smc,&phy->pcm_timer0,value,
+ EV_TOKEN(EVENT_PCM+phy->np,event)) ;
+}
+/*
+ * SMT timer interface
+ * stop PCM timer 0
+ */
+static void stop_pcm_timer0(struct s_smc *smc, struct s_phy *phy)
+{
+ if (phy->pcm_timer0.tm_active)
+ smt_timer_stop(smc,&phy->pcm_timer0) ;
+}
+
+/*
+ init PCM state machine (called by driver)
+ clear all PCM vars and flags
+*/
+void pcm_init(struct s_smc *smc)
+{
+ int i ;
+ int np ;
+ struct s_phy *phy ;
+ struct fddi_mib_p *mib ;
+
+ for (np = 0,phy = smc->y ; np < NUMPHYS ; np++,phy++) {
+ /* Indicates the type of PHY being used */
+ mib = phy->mib ;
+ mib->fddiPORTPCMState = ACTIONS(PC0_OFF) ;
+ phy->np = np ;
+ switch (smc->s.sas) {
+#ifdef CONCENTRATOR
+ case SMT_SAS :
+ mib->fddiPORTMy_Type = (np == PS) ? TS : TM ;
+ break ;
+ case SMT_DAS :
+ mib->fddiPORTMy_Type = (np == PA) ? TA :
+ (np == PB) ? TB : TM ;
+ break ;
+ case SMT_NAC :
+ mib->fddiPORTMy_Type = TM ;
+ break;
+#else
+ case SMT_SAS :
+ mib->fddiPORTMy_Type = (np == PS) ? TS : TNONE ;
+ mib->fddiPORTHardwarePresent = (np == PS) ? TRUE :
+ FALSE ;
+#ifndef SUPERNET_3
+ smc->y[PA].mib->fddiPORTPCMState = PC0_OFF ;
+#else
+ smc->y[PB].mib->fddiPORTPCMState = PC0_OFF ;
+#endif
+ break ;
+ case SMT_DAS :
+ mib->fddiPORTMy_Type = (np == PB) ? TB : TA ;
+ break ;
+#endif
+ }
+ /*
+ * set PMD-type
+ */
+ phy->pmd_scramble = 0 ;
+ switch (phy->pmd_type[PMD_SK_PMD]) {
+ case 'P' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_MULTI ;
+ break ;
+ case 'L' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_LCF ;
+ break ;
+ case 'D' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+ break ;
+ case 'S' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+ phy->pmd_scramble = TRUE ;
+ break ;
+ case 'U' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+ phy->pmd_scramble = TRUE ;
+ break ;
+ case '1' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE1 ;
+ break ;
+ case '2' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE2 ;
+ break ;
+ case '3' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE2 ;
+ break ;
+ case '4' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE1 ;
+ break ;
+ case 'H' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_UNKNOWN ;
+ break ;
+ case 'I' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+ break ;
+ case 'G' :
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+ break ;
+ default:
+ mib->fddiPORTPMDClass = MIB_PMDCLASS_UNKNOWN ;
+ break ;
+ }
+ /*
+ * A and B port can be on primary and secondary path
+ */
+ switch (mib->fddiPORTMy_Type) {
+ case TA :
+ mib->fddiPORTAvailablePaths |= MIB_PATH_S ;
+ mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+ mib->fddiPORTRequestedPaths[2] =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_CON_ALTER |
+ MIB_P_PATH_SEC_PREFER ;
+ mib->fddiPORTRequestedPaths[3] =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_CON_ALTER |
+ MIB_P_PATH_SEC_PREFER |
+ MIB_P_PATH_THRU ;
+ break ;
+ case TB :
+ mib->fddiPORTAvailablePaths |= MIB_PATH_S ;
+ mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+ mib->fddiPORTRequestedPaths[2] =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_PRIM_PREFER ;
+ mib->fddiPORTRequestedPaths[3] =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_PRIM_PREFER |
+ MIB_P_PATH_CON_PREFER |
+ MIB_P_PATH_THRU ;
+ break ;
+ case TS :
+ mib->fddiPORTAvailablePaths |= MIB_PATH_S ;
+ mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+ mib->fddiPORTRequestedPaths[2] =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_CON_ALTER |
+ MIB_P_PATH_PRIM_PREFER ;
+ mib->fddiPORTRequestedPaths[3] =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_CON_ALTER |
+ MIB_P_PATH_PRIM_PREFER ;
+ break ;
+ case TM :
+ mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+ mib->fddiPORTRequestedPaths[2] =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_SEC_ALTER |
+ MIB_P_PATH_PRIM_ALTER ;
+ mib->fddiPORTRequestedPaths[3] = 0 ;
+ break ;
+ }
+
+ phy->pc_lem_fail = FALSE ;
+ mib->fddiPORTPCMStateX = mib->fddiPORTPCMState ;
+ mib->fddiPORTLCTFail_Ct = 0 ;
+ mib->fddiPORTBS_Flag = 0 ;
+ mib->fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+ mib->fddiPORTNeighborType = TNONE ;
+ phy->ls_flag = 0 ;
+ phy->rc_flag = 0 ;
+ phy->tc_flag = 0 ;
+ phy->td_flag = 0 ;
+ if (np >= PM)
+ phy->phy_name = '0' + np - PM ;
+ else
+ phy->phy_name = 'A' + np ;
+ phy->wc_flag = FALSE ; /* set by SMT */
+ memset((char *)&phy->lem,0,sizeof(struct lem_counter)) ;
+ reset_lem_struct(phy) ;
+ memset((char *)&phy->plc,0,sizeof(struct s_plc)) ;
+ phy->plc.p_state = PS_OFF ;
+ for (i = 0 ; i < NUMBITS ; i++) {
+ phy->t_next[i] = 0 ;
+ }
+ }
+ real_init_plc(smc) ;
+}
+
+void init_plc(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ;
+
+ /*
+ * dummy
+ * this is an obsolete public entry point that has to remain
+ * for compat. It is used by various drivers.
+ * the work is now done in real_init_plc()
+ * which is called from pcm_init() ;
+ */
+}
+
+static void real_init_plc(struct s_smc *smc)
+{
+ int p ;
+
+ for (p = 0 ; p < NUMPHYS ; p++)
+ plc_init(smc,p) ;
+}
+
+static void plc_init(struct s_smc *smc, int p)
+{
+ int i ;
+#ifndef MOT_ELM
+ int rev ; /* Revision of PLC-x */
+#endif /* MOT_ELM */
+
+ /* transit PCM state machine to MAINT state */
+ outpw(PLC(p,PL_CNTRL_B),0) ;
+ outpw(PLC(p,PL_CNTRL_B),PL_PCM_STOP) ;
+ outpw(PLC(p,PL_CNTRL_A),0) ;
+
+ /*
+ * if PLC-S then set control register C
+ */
+#ifndef MOT_ELM
+ rev = inpw(PLC(p,PL_STATUS_A)) & PLC_REV_MASK ;
+ if (rev != PLC_REVISION_A)
+#endif /* MOT_ELM */
+ {
+ if (smc->y[p].pmd_scramble) {
+ outpw(PLC(p,PL_CNTRL_C),PLCS_CONTROL_C_S) ;
+#ifdef MOT_ELM
+ outpw(PLC(p,PL_T_FOT_ASS),PLCS_FASSERT_S) ;
+ outpw(PLC(p,PL_T_FOT_DEASS),PLCS_FDEASSERT_S) ;
+#endif /* MOT_ELM */
+ }
+ else {
+ outpw(PLC(p,PL_CNTRL_C),PLCS_CONTROL_C_U) ;
+#ifdef MOT_ELM
+ outpw(PLC(p,PL_T_FOT_ASS),PLCS_FASSERT_U) ;
+ outpw(PLC(p,PL_T_FOT_DEASS),PLCS_FDEASSERT_U) ;
+#endif /* MOT_ELM */
+ }
+ }
+
+ /*
+ * set timer register
+ */
+ for ( i = 0 ; pltm[i].timer; i++) /* set timer parameter reg */
+ outpw(PLC(p,pltm[i].timer),pltm[i].para) ;
+
+ (void)inpw(PLC(p,PL_INTR_EVENT)) ; /* clear interrupt event reg */
+ plc_clear_irq(smc,p) ;
+ outpw(PLC(p,PL_INTR_MASK),plc_imsk_na); /* enable non active irq's */
+
+ /*
+ * if PCM is configured for class s, it will NOT go to the
+ * REMOVE state if offline (page 3-36;)
+ * in the concentrator, all inactive PHYS always must be in
+ * the remove state
+ * there's no real need to use this feature at all ..
+ */
+#ifndef CONCENTRATOR
+ if ((smc->s.sas == SMT_SAS) && (p == PS)) {
+ outpw(PLC(p,PL_CNTRL_B),PL_CLASS_S) ;
+ }
+#endif
+}
+
+/*
+ * control PCM state machine
+ */
+static void plc_go_state(struct s_smc *smc, int p, int state)
+{
+ HW_PTR port ;
+ int val ;
+
+ SK_UNUSED(smc) ;
+
+ port = (HW_PTR) (PLC(p,PL_CNTRL_B)) ;
+ val = inpw(port) & ~(PL_PCM_CNTRL | PL_MAINT) ;
+ outpw(port,val) ;
+ outpw(port,val | state) ;
+}
+
+/*
+ * read current line state (called by ECM & PCM)
+ */
+int sm_pm_get_ls(struct s_smc *smc, int phy)
+{
+ int state ;
+
+#ifdef CONCENTRATOR
+ if (!plc_is_installed(smc,phy))
+ return PC_QLS;
+#endif
+
+ state = inpw(PLC(phy,PL_STATUS_A)) & PL_LINE_ST ;
+ switch(state) {
+ case PL_L_QLS:
+ state = PC_QLS ;
+ break ;
+ case PL_L_MLS:
+ state = PC_MLS ;
+ break ;
+ case PL_L_HLS:
+ state = PC_HLS ;
+ break ;
+ case PL_L_ILS4:
+ case PL_L_ILS16:
+ state = PC_ILS ;
+ break ;
+ case PL_L_ALS:
+ state = PC_LS_PDR ;
+ break ;
+ default :
+ state = PC_LS_NONE ;
+ }
+ return state;
+}
+
+static int plc_send_bits(struct s_smc *smc, struct s_phy *phy, int len)
+{
+ int np = phy->np ; /* PHY index */
+ int n ;
+ int i ;
+
+ SK_UNUSED(smc) ;
+
+ /* create bit vector */
+ for (i = len-1,n = 0 ; i >= 0 ; i--) {
+ n = (n<<1) | phy->t_val[phy->bitn+i] ;
+ }
+ if (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL) {
+#if 0
+ printf("PL_PCM_SIGNAL is set\n") ;
+#endif
+ return 1;
+ }
+ /* write bit[n] & length = 1 to regs */
+ outpw(PLC(np,PL_VECTOR_LEN),len-1) ; /* len=nr-1 */
+ outpw(PLC(np,PL_XMIT_VECTOR),n) ;
+#ifdef DEBUG
+#if 1
+#ifdef DEBUG_BRD
+ if (smc->debug.d_plc & 0x80)
+#else
+ if (debug.d_plc & 0x80)
+#endif
+ printf("SIGNALING bit %d .. %d\n",phy->bitn,phy->bitn+len-1) ;
+#endif
+#endif
+ return 0;
+}
+
+/*
+ * config plc muxes
+ */
+void plc_config_mux(struct s_smc *smc, int mux)
+{
+ if (smc->s.sas != SMT_DAS)
+ return ;
+ if (mux == MUX_WRAPB) {
+ SETMASK(PLC(PA,PL_CNTRL_B),PL_CONFIG_CNTRL,PL_CONFIG_CNTRL) ;
+ SETMASK(PLC(PA,PL_CNTRL_A),PL_SC_REM_LOOP,PL_SC_REM_LOOP) ;
+ }
+ else {
+ CLEAR(PLC(PA,PL_CNTRL_B),PL_CONFIG_CNTRL) ;
+ CLEAR(PLC(PA,PL_CNTRL_A),PL_SC_REM_LOOP) ;
+ }
+ CLEAR(PLC(PB,PL_CNTRL_B),PL_CONFIG_CNTRL) ;
+ CLEAR(PLC(PB,PL_CNTRL_A),PL_SC_REM_LOOP) ;
+}
+
+/*
+ PCM state machine
+ called by dispatcher & fddi_init() (driver)
+ do
+ display state change
+ process event
+ until SM is stable
+*/
+void pcm(struct s_smc *smc, const int np, int event)
+{
+ int state ;
+ int oldstate ;
+ struct s_phy *phy ;
+ struct fddi_mib_p *mib ;
+
+#ifndef CONCENTRATOR
+ /*
+ * ignore 2nd PHY if SAS
+ */
+ if ((np != PS) && (smc->s.sas == SMT_SAS))
+ return ;
+#endif
+ phy = &smc->y[np] ;
+ mib = phy->mib ;
+ oldstate = mib->fddiPORTPCMState ;
+ do {
+ DB_PCM("PCM %c: state %s",
+ phy->phy_name,
+ (mib->fddiPORTPCMState & AFLAG) ? "ACTIONS " : "") ;
+ DB_PCM("%s, event %s\n",
+ pcm_states[mib->fddiPORTPCMState & ~AFLAG],
+ pcm_events[event]) ;
+ state = mib->fddiPORTPCMState ;
+ pcm_fsm(smc,phy,event) ;
+ event = 0 ;
+ } while (state != mib->fddiPORTPCMState) ;
+ /*
+ * because the PLC does the bit signaling for us,
+ * we're always in SIGNAL state
+ * the MIB want's to see CONNECT
+ * we therefore fake an entry in the MIB
+ */
+ if (state == PC5_SIGNAL)
+ mib->fddiPORTPCMStateX = PC3_CONNECT ;
+ else
+ mib->fddiPORTPCMStateX = state ;
+
+#ifndef SLIM_SMT
+ /*
+ * path change
+ */
+ if ( mib->fddiPORTPCMState != oldstate &&
+ ((oldstate == PC8_ACTIVE) || (mib->fddiPORTPCMState == PC8_ACTIVE))) {
+ smt_srf_event(smc,SMT_EVENT_PORT_PATH_CHANGE,
+ (int) (INDEX_PORT+ phy->np),0) ;
+ }
+#endif
+
+#ifdef FDDI_MIB
+ /* check whether a snmp-trap has to be sent */
+
+ if ( mib->fddiPORTPCMState != oldstate ) {
+ /* a real state change took place */
+ DB_SNMP ("PCM from %d to %d\n", oldstate, mib->fddiPORTPCMState);
+ if ( mib->fddiPORTPCMState == PC0_OFF ) {
+ /* send first trap */
+ snmp_fddi_trap (smc, 1, (int) mib->fddiPORTIndex );
+ } else if ( oldstate == PC0_OFF ) {
+ /* send second trap */
+ snmp_fddi_trap (smc, 2, (int) mib->fddiPORTIndex );
+ } else if ( mib->fddiPORTPCMState != PC2_TRACE &&
+ oldstate == PC8_ACTIVE ) {
+ /* send third trap */
+ snmp_fddi_trap (smc, 3, (int) mib->fddiPORTIndex );
+ } else if ( mib->fddiPORTPCMState == PC8_ACTIVE ) {
+ /* send fourth trap */
+ snmp_fddi_trap (smc, 4, (int) mib->fddiPORTIndex );
+ }
+ }
+#endif
+
+ pcm_state_change(smc,np,state) ;
+}
+
+/*
+ * PCM state machine
+ */
+static void pcm_fsm(struct s_smc *smc, struct s_phy *phy, int cmd)
+{
+ int i ;
+ int np = phy->np ; /* PHY index */
+ struct s_plc *plc ;
+ struct fddi_mib_p *mib ;
+#ifndef MOT_ELM
+ u_short plc_rev ; /* Revision of the plc */
+#endif /* nMOT_ELM */
+
+ plc = &phy->plc ;
+ mib = phy->mib ;
+
+ /*
+ * general transitions independent of state
+ */
+ switch (cmd) {
+ case PC_STOP :
+ /*PC00-PC80*/
+ if (mib->fddiPORTPCMState != PC9_MAINT) {
+ GO_STATE(PC0_OFF) ;
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+ FDDI_PORT_EVENT, (u_long) FDDI_PORT_STOP,
+ smt_get_port_event_word(smc));
+ }
+ return ;
+ case PC_START :
+ /*PC01-PC81*/
+ if (mib->fddiPORTPCMState != PC9_MAINT)
+ GO_STATE(PC1_BREAK) ;
+ return ;
+ case PC_DISABLE :
+ /* PC09-PC99 */
+ GO_STATE(PC9_MAINT) ;
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+ FDDI_PORT_EVENT, (u_long) FDDI_PORT_DISABLED,
+ smt_get_port_event_word(smc));
+ return ;
+ case PC_TIMEOUT_LCT :
+ /* if long or extended LCT */
+ stop_pcm_timer0(smc,phy) ;
+ CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+ /* end of LCT is indicate by PCM_CODE (initiate PCM event) */
+ return ;
+ }
+
+ switch(mib->fddiPORTPCMState) {
+ case ACTIONS(PC0_OFF) :
+ stop_pcm_timer0(smc,phy) ;
+ outpw(PLC(np,PL_CNTRL_A),0) ;
+ CLEAR(PLC(np,PL_CNTRL_B),PL_PC_JOIN) ;
+ CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+ sm_ph_lem_stop(smc,np) ; /* disable LEM */
+ phy->cf_loop = FALSE ;
+ phy->cf_join = FALSE ;
+ queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+ plc_go_state(smc,np,PL_PCM_STOP) ;
+ mib->fddiPORTConnectState = PCM_DISABLED ;
+ ACTIONS_DONE() ;
+ break ;
+ case PC0_OFF:
+ /*PC09*/
+ if (cmd == PC_MAINT) {
+ GO_STATE(PC9_MAINT) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(PC1_BREAK) :
+ /* Stop the LCT timer if we came from Signal state */
+ stop_pcm_timer0(smc,phy) ;
+ ACTIONS_DONE() ;
+ plc_go_state(smc,np,0) ;
+ CLEAR(PLC(np,PL_CNTRL_B),PL_PC_JOIN) ;
+ CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+ sm_ph_lem_stop(smc,np) ; /* disable LEM */
+ /*
+ * if vector is already loaded, go to OFF to clear PCM_SIGNAL
+ */
+#if 0
+ if (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL) {
+ plc_go_state(smc,np,PL_PCM_STOP) ;
+ /* TB_MIN ? */
+ }
+#endif
+ /*
+ * Go to OFF state in any case.
+ */
+ plc_go_state(smc,np,PL_PCM_STOP) ;
+
+ if (mib->fddiPORTPC_Withhold == PC_WH_NONE)
+ mib->fddiPORTConnectState = PCM_CONNECTING ;
+ phy->cf_loop = FALSE ;
+ phy->cf_join = FALSE ;
+ queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+ phy->ls_flag = FALSE ;
+ phy->pc_mode = PM_NONE ; /* needed by CFM */
+ phy->bitn = 0 ; /* bit signaling start bit */
+ for (i = 0 ; i < 3 ; i++)
+ pc_tcode_actions(smc,i,phy) ;
+
+ /* Set the non-active interrupt mask register */
+ outpw(PLC(np,PL_INTR_MASK),plc_imsk_na) ;
+
+ /*
+ * If the LCT was stopped. There might be a
+ * PCM_CODE interrupt event present.
+ * This must be cleared.
+ */
+ (void)inpw(PLC(np,PL_INTR_EVENT)) ;
+#ifndef MOT_ELM
+ /* Get the plc revision for revision dependent code */
+ plc_rev = inpw(PLC(np,PL_STATUS_A)) & PLC_REV_MASK ;
+
+ if (plc_rev != PLC_REV_SN3)
+#endif /* MOT_ELM */
+ {
+ /*
+ * No supernet III PLC, so set Xmit verctor and
+ * length BEFORE starting the state machine.
+ */
+ if (plc_send_bits(smc,phy,3)) {
+ return ;
+ }
+ }
+
+ /*
+ * Now give the Start command.
+ * - The start command shall be done before setting the bits
+ * to be signaled. (In PLC-S description and PLCS in SN3.
+ * - The start command shall be issued AFTER setting the
+ * XMIT vector and the XMIT length register.
+ *
+ * We do it exactly according this specs for the old PLC and
+ * the new PLCS inside the SN3.
+ * For the usual PLCS we try it the way it is done for the
+ * old PLC and set the XMIT registers again, if the PLC is
+ * not in SIGNAL state. This is done according to an PLCS
+ * errata workaround.
+ */
+
+ plc_go_state(smc,np,PL_PCM_START) ;
+
+ /*
+ * workaround for PLC-S eng. sample errata
+ */
+#ifdef MOT_ELM
+ if (!(inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL))
+#else /* nMOT_ELM */
+ if (((inpw(PLC(np,PL_STATUS_A)) & PLC_REV_MASK) !=
+ PLC_REVISION_A) &&
+ !(inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL))
+#endif /* nMOT_ELM */
+ {
+ /*
+ * Set register again (PLCS errata) or the first time
+ * (new SN3 PLCS).
+ */
+ (void) plc_send_bits(smc,phy,3) ;
+ }
+ /*
+ * end of workaround
+ */
+
+ GO_STATE(PC5_SIGNAL) ;
+ plc->p_state = PS_BIT3 ;
+ plc->p_bits = 3 ;
+ plc->p_start = 0 ;
+
+ break ;
+ case PC1_BREAK :
+ break ;
+ case ACTIONS(PC2_TRACE) :
+ plc_go_state(smc,np,PL_PCM_TRACE) ;
+ ACTIONS_DONE() ;
+ break ;
+ case PC2_TRACE :
+ break ;
+
+ case PC3_CONNECT : /* these states are done by hardware */
+ case PC4_NEXT :
+ break ;
+
+ case ACTIONS(PC5_SIGNAL) :
+ ACTIONS_DONE() ;
+ case PC5_SIGNAL :
+ if ((cmd != PC_SIGNAL) && (cmd != PC_TIMEOUT_LCT))
+ break ;
+ switch (plc->p_state) {
+ case PS_BIT3 :
+ for (i = 0 ; i <= 2 ; i++)
+ pc_rcode_actions(smc,i,phy) ;
+ pc_tcode_actions(smc,3,phy) ;
+ plc->p_state = PS_BIT4 ;
+ plc->p_bits = 1 ;
+ plc->p_start = 3 ;
+ phy->bitn = 3 ;
+ if (plc_send_bits(smc,phy,1)) {
+ return ;
+ }
+ break ;
+ case PS_BIT4 :
+ pc_rcode_actions(smc,3,phy) ;
+ for (i = 4 ; i <= 6 ; i++)
+ pc_tcode_actions(smc,i,phy) ;
+ plc->p_state = PS_BIT7 ;
+ plc->p_bits = 3 ;
+ plc->p_start = 4 ;
+ phy->bitn = 4 ;
+ if (plc_send_bits(smc,phy,3)) {
+ return ;
+ }
+ break ;
+ case PS_BIT7 :
+ for (i = 3 ; i <= 6 ; i++)
+ pc_rcode_actions(smc,i,phy) ;
+ plc->p_state = PS_LCT ;
+ plc->p_bits = 0 ;
+ plc->p_start = 7 ;
+ phy->bitn = 7 ;
+ sm_ph_lem_start(smc,np,(int)smc->s.lct_short) ; /* enable LEM */
+ /* start LCT */
+ i = inpw(PLC(np,PL_CNTRL_B)) & ~PL_PC_LOOP ;
+ outpw(PLC(np,PL_CNTRL_B),i) ; /* must be cleared */
+ outpw(PLC(np,PL_CNTRL_B),i | PL_RLBP) ;
+ break ;
+ case PS_LCT :
+ /* check for local LCT failure */
+ pc_tcode_actions(smc,7,phy) ;
+ /*
+ * set tval[7]
+ */
+ plc->p_state = PS_BIT8 ;
+ plc->p_bits = 1 ;
+ plc->p_start = 7 ;
+ phy->bitn = 7 ;
+ if (plc_send_bits(smc,phy,1)) {
+ return ;
+ }
+ break ;
+ case PS_BIT8 :
+ /* check for remote LCT failure */
+ pc_rcode_actions(smc,7,phy) ;
+ if (phy->t_val[7] || phy->r_val[7]) {
+ plc_go_state(smc,np,PL_PCM_STOP) ;
+ GO_STATE(PC1_BREAK) ;
+ break ;
+ }
+ for (i = 8 ; i <= 9 ; i++)
+ pc_tcode_actions(smc,i,phy) ;
+ plc->p_state = PS_JOIN ;
+ plc->p_bits = 2 ;
+ plc->p_start = 8 ;
+ phy->bitn = 8 ;
+ if (plc_send_bits(smc,phy,2)) {
+ return ;
+ }
+ break ;
+ case PS_JOIN :
+ for (i = 8 ; i <= 9 ; i++)
+ pc_rcode_actions(smc,i,phy) ;
+ plc->p_state = PS_ACTIVE ;
+ GO_STATE(PC6_JOIN) ;
+ break ;
+ }
+ break ;
+
+ case ACTIONS(PC6_JOIN) :
+ /*
+ * prevent mux error when going from WRAP_A to WRAP_B
+ */
+ if (smc->s.sas == SMT_DAS && np == PB &&
+ (smc->y[PA].pc_mode == PM_TREE ||
+ smc->y[PB].pc_mode == PM_TREE)) {
+ SETMASK(PLC(np,PL_CNTRL_A),
+ PL_SC_REM_LOOP,PL_SC_REM_LOOP) ;
+ SETMASK(PLC(np,PL_CNTRL_B),
+ PL_CONFIG_CNTRL,PL_CONFIG_CNTRL) ;
+ }
+ SETMASK(PLC(np,PL_CNTRL_B),PL_PC_JOIN,PL_PC_JOIN) ;
+ SETMASK(PLC(np,PL_CNTRL_B),PL_PC_JOIN,PL_PC_JOIN) ;
+ ACTIONS_DONE() ;
+ cmd = 0 ;
+ /* fall thru */
+ case PC6_JOIN :
+ switch (plc->p_state) {
+ case PS_ACTIVE:
+ /*PC88b*/
+ if (!phy->cf_join) {
+ phy->cf_join = TRUE ;
+ queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+ }
+ if (cmd == PC_JOIN)
+ GO_STATE(PC8_ACTIVE) ;
+ /*PC82*/
+ if (cmd == PC_TRACE) {
+ GO_STATE(PC2_TRACE) ;
+ break ;
+ }
+ break ;
+ }
+ break ;
+
+ case PC7_VERIFY :
+ break ;
+
+ case ACTIONS(PC8_ACTIVE) :
+ /*
+ * start LEM for SMT
+ */
+ sm_ph_lem_start(smc,(int)phy->np,LCT_LEM_MAX) ;
+
+ phy->tr_flag = FALSE ;
+ mib->fddiPORTConnectState = PCM_ACTIVE ;
+
+ /* Set the active interrupt mask register */
+ outpw(PLC(np,PL_INTR_MASK),plc_imsk_act) ;
+
+ ACTIONS_DONE() ;
+ break ;
+ case PC8_ACTIVE :
+ /*PC81 is done by PL_TNE_EXPIRED irq */
+ /*PC82*/
+ if (cmd == PC_TRACE) {
+ GO_STATE(PC2_TRACE) ;
+ break ;
+ }
+ /*PC88c: is done by TRACE_PROP irq */
+
+ break ;
+ case ACTIONS(PC9_MAINT) :
+ stop_pcm_timer0(smc,phy) ;
+ CLEAR(PLC(np,PL_CNTRL_B),PL_PC_JOIN) ;
+ CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+ CLEAR(PLC(np,PL_INTR_MASK),PL_LE_CTR) ; /* disable LEM int. */
+ sm_ph_lem_stop(smc,np) ; /* disable LEM */
+ phy->cf_loop = FALSE ;
+ phy->cf_join = FALSE ;
+ queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+ plc_go_state(smc,np,PL_PCM_STOP) ;
+ mib->fddiPORTConnectState = PCM_DISABLED ;
+ SETMASK(PLC(np,PL_CNTRL_B),PL_MAINT,PL_MAINT) ;
+ sm_ph_linestate(smc,np,(int) MIB2LS(mib->fddiPORTMaint_LS)) ;
+ outpw(PLC(np,PL_CNTRL_A),PL_SC_BYPASS) ;
+ ACTIONS_DONE() ;
+ break ;
+ case PC9_MAINT :
+ DB_PCMN(1,"PCM %c : MAINT\n",phy->phy_name,0) ;
+ /*PC90*/
+ if (cmd == PC_ENABLE) {
+ GO_STATE(PC0_OFF) ;
+ break ;
+ }
+ break ;
+
+ default:
+ SMT_PANIC(smc,SMT_E0118, SMT_E0118_MSG) ;
+ break ;
+ }
+}
+
+/*
+ * force line state on a PHY output (only in MAINT state)
+ */
+static void sm_ph_linestate(struct s_smc *smc, int phy, int ls)
+{
+ int cntrl ;
+
+ SK_UNUSED(smc) ;
+
+ cntrl = (inpw(PLC(phy,PL_CNTRL_B)) & ~PL_MAINT_LS) |
+ PL_PCM_STOP | PL_MAINT ;
+ switch(ls) {
+ case PC_QLS: /* Force Quiet */
+ cntrl |= PL_M_QUI0 ;
+ break ;
+ case PC_MLS: /* Force Master */
+ cntrl |= PL_M_MASTR ;
+ break ;
+ case PC_HLS: /* Force Halt */
+ cntrl |= PL_M_HALT ;
+ break ;
+ default :
+ case PC_ILS: /* Force Idle */
+ cntrl |= PL_M_IDLE ;
+ break ;
+ case PC_LS_PDR: /* Enable repeat filter */
+ cntrl |= PL_M_TPDR ;
+ break ;
+ }
+ outpw(PLC(phy,PL_CNTRL_B),cntrl) ;
+}
+
+static void reset_lem_struct(struct s_phy *phy)
+{
+ struct lem_counter *lem = &phy->lem ;
+
+ phy->mib->fddiPORTLer_Estimate = 15 ;
+ lem->lem_float_ber = 15 * 100 ;
+}
+
+/*
+ * link error monitor
+ */
+static void lem_evaluate(struct s_smc *smc, struct s_phy *phy)
+{
+ int ber ;
+ u_long errors ;
+ struct lem_counter *lem = &phy->lem ;
+ struct fddi_mib_p *mib ;
+ int cond ;
+
+ mib = phy->mib ;
+
+ if (!lem->lem_on)
+ return ;
+
+ errors = inpw(PLC(((int) phy->np),PL_LINK_ERR_CTR)) ;
+ lem->lem_errors += errors ;
+ mib->fddiPORTLem_Ct += errors ;
+
+ errors = lem->lem_errors ;
+ /*
+ * calculation is called on a intervall of 8 seconds
+ * -> this means, that one error in 8 sec. is one of 8*125*10E6
+ * the same as BER = 10E-9
+ * Please note:
+ * -> 9 errors in 8 seconds mean:
+ * BER = 9 * 10E-9 and this is
+ * < 10E-8, so the limit of 10E-8 is not reached!
+ */
+
+ if (!errors) ber = 15 ;
+ else if (errors <= 9) ber = 9 ;
+ else if (errors <= 99) ber = 8 ;
+ else if (errors <= 999) ber = 7 ;
+ else if (errors <= 9999) ber = 6 ;
+ else if (errors <= 99999) ber = 5 ;
+ else if (errors <= 999999) ber = 4 ;
+ else if (errors <= 9999999) ber = 3 ;
+ else if (errors <= 99999999) ber = 2 ;
+ else if (errors <= 999999999) ber = 1 ;
+ else ber = 0 ;
+
+ /*
+ * weighted average
+ */
+ ber *= 100 ;
+ lem->lem_float_ber = lem->lem_float_ber * 7 + ber * 3 ;
+ lem->lem_float_ber /= 10 ;
+ mib->fddiPORTLer_Estimate = lem->lem_float_ber / 100 ;
+ if (mib->fddiPORTLer_Estimate < 4) {
+ mib->fddiPORTLer_Estimate = 4 ;
+ }
+
+ if (lem->lem_errors) {
+ DB_PCMN(1,"LEM %c :\n",phy->np == PB? 'B' : 'A',0) ;
+ DB_PCMN(1,"errors : %ld\n",lem->lem_errors,0) ;
+ DB_PCMN(1,"sum_errors : %ld\n",mib->fddiPORTLem_Ct,0) ;
+ DB_PCMN(1,"current BER : 10E-%d\n",ber/100,0) ;
+ DB_PCMN(1,"float BER : 10E-(%d/100)\n",lem->lem_float_ber,0) ;
+ DB_PCMN(1,"avg. BER : 10E-%d\n",
+ mib->fddiPORTLer_Estimate,0) ;
+ }
+
+ lem->lem_errors = 0L ;
+
+#ifndef SLIM_SMT
+ cond = (mib->fddiPORTLer_Estimate <= mib->fddiPORTLer_Alarm) ?
+ TRUE : FALSE ;
+#ifdef SMT_EXT_CUTOFF
+ smt_ler_alarm_check(smc,phy,cond) ;
+#endif /* nSMT_EXT_CUTOFF */
+ if (cond != mib->fddiPORTLerFlag) {
+ smt_srf_event(smc,SMT_COND_PORT_LER,
+ (int) (INDEX_PORT+ phy->np) ,cond) ;
+ }
+#endif
+
+ if ( mib->fddiPORTLer_Estimate <= mib->fddiPORTLer_Cutoff) {
+ phy->pc_lem_fail = TRUE ; /* flag */
+ mib->fddiPORTLem_Reject_Ct++ ;
+ /*
+ * "forgive 10e-2" if we cutoff so we can come
+ * up again ..
+ */
+ lem->lem_float_ber += 2*100 ;
+
+ /*PC81b*/
+#ifdef CONCENTRATOR
+ DB_PCMN(1,"PCM: LER cutoff on port %d cutoff %d\n",
+ phy->np, mib->fddiPORTLer_Cutoff) ;
+#endif
+#ifdef SMT_EXT_CUTOFF
+ smt_port_off_event(smc,phy->np);
+#else /* nSMT_EXT_CUTOFF */
+ queue_event(smc,(int)(EVENT_PCM+phy->np),PC_START) ;
+#endif /* nSMT_EXT_CUTOFF */
+ }
+}
+
+/*
+ * called by SMT to calculate LEM bit error rate
+ */
+void sm_lem_evaluate(struct s_smc *smc)
+{
+ int np ;
+
+ for (np = 0 ; np < NUMPHYS ; np++)
+ lem_evaluate(smc,&smc->y[np]) ;
+}
+
+static void lem_check_lct(struct s_smc *smc, struct s_phy *phy)
+{
+ struct lem_counter *lem = &phy->lem ;
+ struct fddi_mib_p *mib ;
+ int errors ;
+
+ mib = phy->mib ;
+
+ phy->pc_lem_fail = FALSE ; /* flag */
+ errors = inpw(PLC(((int)phy->np),PL_LINK_ERR_CTR)) ;
+ lem->lem_errors += errors ;
+ mib->fddiPORTLem_Ct += errors ;
+ if (lem->lem_errors) {
+ switch(phy->lc_test) {
+ case LC_SHORT:
+ if (lem->lem_errors >= smc->s.lct_short)
+ phy->pc_lem_fail = TRUE ;
+ break ;
+ case LC_MEDIUM:
+ if (lem->lem_errors >= smc->s.lct_medium)
+ phy->pc_lem_fail = TRUE ;
+ break ;
+ case LC_LONG:
+ if (lem->lem_errors >= smc->s.lct_long)
+ phy->pc_lem_fail = TRUE ;
+ break ;
+ case LC_EXTENDED:
+ if (lem->lem_errors >= smc->s.lct_extended)
+ phy->pc_lem_fail = TRUE ;
+ break ;
+ }
+ DB_PCMN(1," >>errors : %d\n",lem->lem_errors,0) ;
+ }
+ if (phy->pc_lem_fail) {
+ mib->fddiPORTLCTFail_Ct++ ;
+ mib->fddiPORTLem_Reject_Ct++ ;
+ }
+ else
+ mib->fddiPORTLCTFail_Ct = 0 ;
+}
+
+/*
+ * LEM functions
+ */
+static void sm_ph_lem_start(struct s_smc *smc, int np, int threshold)
+{
+ struct lem_counter *lem = &smc->y[np].lem ;
+
+ lem->lem_on = 1 ;
+ lem->lem_errors = 0L ;
+
+ /* Do NOT reset mib->fddiPORTLer_Estimate here. It is called too
+ * often.
+ */
+
+ outpw(PLC(np,PL_LE_THRESHOLD),threshold) ;
+ (void)inpw(PLC(np,PL_LINK_ERR_CTR)) ; /* clear error counter */
+
+ /* enable LE INT */
+ SETMASK(PLC(np,PL_INTR_MASK),PL_LE_CTR,PL_LE_CTR) ;
+}
+
+static void sm_ph_lem_stop(struct s_smc *smc, int np)
+{
+ struct lem_counter *lem = &smc->y[np].lem ;
+
+ lem->lem_on = 0 ;
+ CLEAR(PLC(np,PL_INTR_MASK),PL_LE_CTR) ;
+}
+
+/* ARGSUSED */
+void sm_pm_ls_latch(struct s_smc *smc, int phy, int on_off)
+/* int on_off; en- or disable ident. ls */
+{
+ SK_UNUSED(smc) ;
+
+ phy = phy ; on_off = on_off ;
+}
+
+
+/*
+ * PCM pseudo code
+ * receive actions are called AFTER the bit n is received,
+ * i.e. if pc_rcode_actions(5) is called, bit 6 is the next bit to be received
+ */
+
+/*
+ * PCM pseudo code 5.1 .. 6.1
+ */
+static void pc_rcode_actions(struct s_smc *smc, int bit, struct s_phy *phy)
+{
+ struct fddi_mib_p *mib ;
+
+ mib = phy->mib ;
+
+ DB_PCMN(1,"SIG rec %x %x:\n", bit,phy->r_val[bit] ) ;
+ bit++ ;
+
+ switch(bit) {
+ case 0:
+ case 1:
+ case 2:
+ break ;
+ case 3 :
+ if (phy->r_val[1] == 0 && phy->r_val[2] == 0)
+ mib->fddiPORTNeighborType = TA ;
+ else if (phy->r_val[1] == 0 && phy->r_val[2] == 1)
+ mib->fddiPORTNeighborType = TB ;
+ else if (phy->r_val[1] == 1 && phy->r_val[2] == 0)
+ mib->fddiPORTNeighborType = TS ;
+ else if (phy->r_val[1] == 1 && phy->r_val[2] == 1)
+ mib->fddiPORTNeighborType = TM ;
+ break ;
+ case 4:
+ if (mib->fddiPORTMy_Type == TM &&
+ mib->fddiPORTNeighborType == TM) {
+ DB_PCMN(1,"PCM %c : E100 withhold M-M\n",
+ phy->phy_name,0) ;
+ mib->fddiPORTPC_Withhold = PC_WH_M_M ;
+ RS_SET(smc,RS_EVENT) ;
+ }
+ else if (phy->t_val[3] || phy->r_val[3]) {
+ mib->fddiPORTPC_Withhold = PC_WH_NONE ;
+ if (mib->fddiPORTMy_Type == TM ||
+ mib->fddiPORTNeighborType == TM)
+ phy->pc_mode = PM_TREE ;
+ else
+ phy->pc_mode = PM_PEER ;
+
+ /* reevaluate the selection criteria (wc_flag) */
+ all_selection_criteria (smc);
+
+ if (phy->wc_flag) {
+ mib->fddiPORTPC_Withhold = PC_WH_PATH ;
+ }
+ }
+ else {
+ mib->fddiPORTPC_Withhold = PC_WH_OTHER ;
+ RS_SET(smc,RS_EVENT) ;
+ DB_PCMN(1,"PCM %c : E101 withhold other\n",
+ phy->phy_name,0) ;
+ }
+ phy->twisted = ((mib->fddiPORTMy_Type != TS) &&
+ (mib->fddiPORTMy_Type != TM) &&
+ (mib->fddiPORTNeighborType ==
+ mib->fddiPORTMy_Type)) ;
+ if (phy->twisted) {
+ DB_PCMN(1,"PCM %c : E102 !!! TWISTED !!!\n",
+ phy->phy_name,0) ;
+ }
+ break ;
+ case 5 :
+ break ;
+ case 6:
+ if (phy->t_val[4] || phy->r_val[4]) {
+ if ((phy->t_val[4] && phy->t_val[5]) ||
+ (phy->r_val[4] && phy->r_val[5]) )
+ phy->lc_test = LC_EXTENDED ;
+ else
+ phy->lc_test = LC_LONG ;
+ }
+ else if (phy->t_val[5] || phy->r_val[5])
+ phy->lc_test = LC_MEDIUM ;
+ else
+ phy->lc_test = LC_SHORT ;
+ switch (phy->lc_test) {
+ case LC_SHORT : /* 50ms */
+ outpw(PLC((int)phy->np,PL_LC_LENGTH), TP_LC_LENGTH ) ;
+ phy->t_next[7] = smc->s.pcm_lc_short ;
+ break ;
+ case LC_MEDIUM : /* 500ms */
+ outpw(PLC((int)phy->np,PL_LC_LENGTH), TP_LC_LONGLN ) ;
+ phy->t_next[7] = smc->s.pcm_lc_medium ;
+ break ;
+ case LC_LONG :
+ SETMASK(PLC((int)phy->np,PL_CNTRL_B),PL_LONG,PL_LONG) ;
+ phy->t_next[7] = smc->s.pcm_lc_long ;
+ break ;
+ case LC_EXTENDED :
+ SETMASK(PLC((int)phy->np,PL_CNTRL_B),PL_LONG,PL_LONG) ;
+ phy->t_next[7] = smc->s.pcm_lc_extended ;
+ break ;
+ }
+ if (phy->t_next[7] > smc->s.pcm_lc_medium) {
+ start_pcm_timer0(smc,phy->t_next[7],PC_TIMEOUT_LCT,phy);
+ }
+ DB_PCMN(1,"LCT timer = %ld us\n", phy->t_next[7], 0) ;
+ phy->t_next[9] = smc->s.pcm_t_next_9 ;
+ break ;
+ case 7:
+ if (phy->t_val[6]) {
+ phy->cf_loop = TRUE ;
+ }
+ phy->td_flag = TRUE ;
+ break ;
+ case 8:
+ if (phy->t_val[7] || phy->r_val[7]) {
+ DB_PCMN(1,"PCM %c : E103 LCT fail %s\n",
+ phy->phy_name,phy->t_val[7]? "local":"remote") ;
+ queue_event(smc,(int)(EVENT_PCM+phy->np),PC_START) ;
+ }
+ break ;
+ case 9:
+ if (phy->t_val[8] || phy->r_val[8]) {
+ if (phy->t_val[8])
+ phy->cf_loop = TRUE ;
+ phy->td_flag = TRUE ;
+ }
+ break ;
+ case 10:
+ if (phy->r_val[9]) {
+ /* neighbor intends to have MAC on output */ ;
+ mib->fddiPORTMacIndicated.R_val = TRUE ;
+ }
+ else {
+ /* neighbor does not intend to have MAC on output */ ;
+ mib->fddiPORTMacIndicated.R_val = FALSE ;
+ }
+ break ;
+ }
+}
+
+/*
+ * PCM pseudo code 5.1 .. 6.1
+ */
+static void pc_tcode_actions(struct s_smc *smc, const int bit, struct s_phy *phy)
+{
+ int np = phy->np ;
+ struct fddi_mib_p *mib ;
+
+ mib = phy->mib ;
+
+ switch(bit) {
+ case 0:
+ phy->t_val[0] = 0 ; /* no escape used */
+ break ;
+ case 1:
+ if (mib->fddiPORTMy_Type == TS || mib->fddiPORTMy_Type == TM)
+ phy->t_val[1] = 1 ;
+ else
+ phy->t_val[1] = 0 ;
+ break ;
+ case 2 :
+ if (mib->fddiPORTMy_Type == TB || mib->fddiPORTMy_Type == TM)
+ phy->t_val[2] = 1 ;
+ else
+ phy->t_val[2] = 0 ;
+ break ;
+ case 3:
+ {
+ int type,ne ;
+ int policy ;
+
+ type = mib->fddiPORTMy_Type ;
+ ne = mib->fddiPORTNeighborType ;
+ policy = smc->mib.fddiSMTConnectionPolicy ;
+
+ phy->t_val[3] = 1 ; /* Accept connection */
+ switch (type) {
+ case TA :
+ if (
+ ((policy & POLICY_AA) && ne == TA) ||
+ ((policy & POLICY_AB) && ne == TB) ||
+ ((policy & POLICY_AS) && ne == TS) ||
+ ((policy & POLICY_AM) && ne == TM) )
+ phy->t_val[3] = 0 ; /* Reject */
+ break ;
+ case TB :
+ if (
+ ((policy & POLICY_BA) && ne == TA) ||
+ ((policy & POLICY_BB) && ne == TB) ||
+ ((policy & POLICY_BS) && ne == TS) ||
+ ((policy & POLICY_BM) && ne == TM) )
+ phy->t_val[3] = 0 ; /* Reject */
+ break ;
+ case TS :
+ if (
+ ((policy & POLICY_SA) && ne == TA) ||
+ ((policy & POLICY_SB) && ne == TB) ||
+ ((policy & POLICY_SS) && ne == TS) ||
+ ((policy & POLICY_SM) && ne == TM) )
+ phy->t_val[3] = 0 ; /* Reject */
+ break ;
+ case TM :
+ if ( ne == TM ||
+ ((policy & POLICY_MA) && ne == TA) ||
+ ((policy & POLICY_MB) && ne == TB) ||
+ ((policy & POLICY_MS) && ne == TS) ||
+ ((policy & POLICY_MM) && ne == TM) )
+ phy->t_val[3] = 0 ; /* Reject */
+ break ;
+ }
+#ifndef SLIM_SMT
+ /*
+ * detect undesirable connection attempt event
+ */
+ if ( (type == TA && ne == TA ) ||
+ (type == TA && ne == TS ) ||
+ (type == TB && ne == TB ) ||
+ (type == TB && ne == TS ) ||
+ (type == TS && ne == TA ) ||
+ (type == TS && ne == TB ) ) {
+ smt_srf_event(smc,SMT_EVENT_PORT_CONNECTION,
+ (int) (INDEX_PORT+ phy->np) ,0) ;
+ }
+#endif
+ }
+ break ;
+ case 4:
+ if (mib->fddiPORTPC_Withhold == PC_WH_NONE) {
+ if (phy->pc_lem_fail) {
+ phy->t_val[4] = 1 ; /* long */
+ phy->t_val[5] = 0 ;
+ }
+ else {
+ phy->t_val[4] = 0 ;
+ if (mib->fddiPORTLCTFail_Ct > 0)
+ phy->t_val[5] = 1 ; /* medium */
+ else
+ phy->t_val[5] = 0 ; /* short */
+
+ /*
+ * Implementers choice: use medium
+ * instead of short when undesired
+ * connection attempt is made.
+ */
+ if (phy->wc_flag)
+ phy->t_val[5] = 1 ; /* medium */
+ }
+ mib->fddiPORTConnectState = PCM_CONNECTING ;
+ }
+ else {
+ mib->fddiPORTConnectState = PCM_STANDBY ;
+ phy->t_val[4] = 1 ; /* extended */
+ phy->t_val[5] = 1 ;
+ }
+ break ;
+ case 5:
+ break ;
+ case 6:
+ /* we do NOT have a MAC for LCT */
+ phy->t_val[6] = 0 ;
+ break ;
+ case 7:
+ phy->cf_loop = FALSE ;
+ lem_check_lct(smc,phy) ;
+ if (phy->pc_lem_fail) {
+ DB_PCMN(1,"PCM %c : E104 LCT failed\n",
+ phy->phy_name,0) ;
+ phy->t_val[7] = 1 ;
+ }
+ else
+ phy->t_val[7] = 0 ;
+ break ;
+ case 8:
+ phy->t_val[8] = 0 ; /* Don't request MAC loopback */
+ break ;
+ case 9:
+ phy->cf_loop = 0 ;
+ if ((mib->fddiPORTPC_Withhold != PC_WH_NONE) ||
+ ((smc->s.sas == SMT_DAS) && (phy->wc_flag))) {
+ queue_event(smc,EVENT_PCM+np,PC_START) ;
+ break ;
+ }
+ phy->t_val[9] = FALSE ;
+ switch (smc->s.sas) {
+ case SMT_DAS :
+ /*
+ * MAC intended on output
+ */
+ if (phy->pc_mode == PM_TREE) {
+ if ((np == PB) || ((np == PA) &&
+ (smc->y[PB].mib->fddiPORTConnectState !=
+ PCM_ACTIVE)))
+ phy->t_val[9] = TRUE ;
+ }
+ else {
+ if (np == PB)
+ phy->t_val[9] = TRUE ;
+ }
+ break ;
+ case SMT_SAS :
+ if (np == PS)
+ phy->t_val[9] = TRUE ;
+ break ;
+#ifdef CONCENTRATOR
+ case SMT_NAC :
+ /*
+ * MAC intended on output
+ */
+ if (np == PB)
+ phy->t_val[9] = TRUE ;
+ break ;
+#endif
+ }
+ mib->fddiPORTMacIndicated.T_val = phy->t_val[9] ;
+ break ;
+ }
+ DB_PCMN(1,"SIG snd %x %x:\n", bit,phy->t_val[bit] ) ;
+}
+
+/*
+ * return status twisted (called by SMT)
+ */
+int pcm_status_twisted(struct s_smc *smc)
+{
+ int twist = 0 ;
+ if (smc->s.sas != SMT_DAS)
+ return 0;
+ if (smc->y[PA].twisted && (smc->y[PA].mib->fddiPORTPCMState == PC8_ACTIVE))
+ twist |= 1 ;
+ if (smc->y[PB].twisted && (smc->y[PB].mib->fddiPORTPCMState == PC8_ACTIVE))
+ twist |= 2 ;
+ return twist;
+}
+
+/*
+ * return status (called by SMT)
+ * type
+ * state
+ * remote phy type
+ * remote mac yes/no
+ */
+void pcm_status_state(struct s_smc *smc, int np, int *type, int *state,
+ int *remote, int *mac)
+{
+ struct s_phy *phy = &smc->y[np] ;
+ struct fddi_mib_p *mib ;
+
+ mib = phy->mib ;
+
+ /* remote PHY type and MAC - set only if active */
+ *mac = 0 ;
+ *type = mib->fddiPORTMy_Type ; /* our PHY type */
+ *state = mib->fddiPORTConnectState ;
+ *remote = mib->fddiPORTNeighborType ;
+
+ switch(mib->fddiPORTPCMState) {
+ case PC8_ACTIVE :
+ *mac = mib->fddiPORTMacIndicated.R_val ;
+ break ;
+ }
+}
+
+/*
+ * return rooted station status (called by SMT)
+ */
+int pcm_rooted_station(struct s_smc *smc)
+{
+ int n ;
+
+ for (n = 0 ; n < NUMPHYS ; n++) {
+ if (smc->y[n].mib->fddiPORTPCMState == PC8_ACTIVE &&
+ smc->y[n].mib->fddiPORTNeighborType == TM)
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Interrupt actions for PLC & PCM events
+ */
+void plc_irq(struct s_smc *smc, int np, unsigned int cmd)
+/* int np; PHY index */
+{
+ struct s_phy *phy = &smc->y[np] ;
+ struct s_plc *plc = &phy->plc ;
+ int n ;
+#ifdef SUPERNET_3
+ int corr_mask ;
+#endif /* SUPERNET_3 */
+ int i ;
+
+ if (np >= smc->s.numphys) {
+ plc->soft_err++ ;
+ return ;
+ }
+ if (cmd & PL_EBUF_ERR) { /* elastic buff. det. over-|underflow*/
+ /*
+ * Check whether the SRF Condition occurred.
+ */
+ if (!plc->ebuf_cont && phy->mib->fddiPORTPCMState == PC8_ACTIVE){
+ /*
+ * This is the real Elasticity Error.
+ * More than one in a row are treated as a
+ * single one.
+ * Only count this in the active state.
+ */
+ phy->mib->fddiPORTEBError_Ct ++ ;
+
+ }
+
+ plc->ebuf_err++ ;
+ if (plc->ebuf_cont <= 1000) {
+ /*
+ * Prevent counter from being wrapped after
+ * hanging years in that interrupt.
+ */
+ plc->ebuf_cont++ ; /* Ebuf continuous error */
+ }
+
+#ifdef SUPERNET_3
+ if (plc->ebuf_cont == 1000 &&
+ ((inpw(PLC(np,PL_STATUS_A)) & PLC_REV_MASK) ==
+ PLC_REV_SN3)) {
+ /*
+ * This interrupt remeained high for at least
+ * 1000 consecutive interrupt calls.
+ *
+ * This is caused by a hardware error of the
+ * ORION part of the Supernet III chipset.
+ *
+ * Disable this bit from the mask.
+ */
+ corr_mask = (plc_imsk_na & ~PL_EBUF_ERR) ;
+ outpw(PLC(np,PL_INTR_MASK),corr_mask);
+
+ /*
+ * Disconnect from the ring.
+ * Call the driver with the reset indication.
+ */
+ queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+
+ /*
+ * Make an error log entry.
+ */
+ SMT_ERR_LOG(smc,SMT_E0136, SMT_E0136_MSG) ;
+
+ /*
+ * Indicate the Reset.
+ */
+ drv_reset_indication(smc) ;
+ }
+#endif /* SUPERNET_3 */
+ } else {
+ /* Reset the continuous error variable */
+ plc->ebuf_cont = 0 ; /* reset Ebuf continuous error */
+ }
+ if (cmd & PL_PHYINV) { /* physical layer invalid signal */
+ plc->phyinv++ ;
+ }
+ if (cmd & PL_VSYM_CTR) { /* violation symbol counter has incr.*/
+ plc->vsym_ctr++ ;
+ }
+ if (cmd & PL_MINI_CTR) { /* dep. on PLC_CNTRL_A's MINI_CTR_INT*/
+ plc->mini_ctr++ ;
+ }
+ if (cmd & PL_LE_CTR) { /* link error event counter */
+ int j ;
+
+ /*
+ * note: PL_LINK_ERR_CTR MUST be read to clear it
+ */
+ j = inpw(PLC(np,PL_LE_THRESHOLD)) ;
+ i = inpw(PLC(np,PL_LINK_ERR_CTR)) ;
+
+ if (i < j) {
+ /* wrapped around */
+ i += 256 ;
+ }
+
+ if (phy->lem.lem_on) {
+ /* Note: Lem errors shall only be counted when
+ * link is ACTIVE or LCT is active.
+ */
+ phy->lem.lem_errors += i ;
+ phy->mib->fddiPORTLem_Ct += i ;
+ }
+ }
+ if (cmd & PL_TPC_EXPIRED) { /* TPC timer reached zero */
+ if (plc->p_state == PS_LCT) {
+ /*
+ * end of LCT
+ */
+ ;
+ }
+ plc->tpc_exp++ ;
+ }
+ if (cmd & PL_LS_MATCH) { /* LS == LS in PLC_CNTRL_B's MATCH_LS*/
+ switch (inpw(PLC(np,PL_CNTRL_B)) & PL_MATCH_LS) {
+ case PL_I_IDLE : phy->curr_ls = PC_ILS ; break ;
+ case PL_I_HALT : phy->curr_ls = PC_HLS ; break ;
+ case PL_I_MASTR : phy->curr_ls = PC_MLS ; break ;
+ case PL_I_QUIET : phy->curr_ls = PC_QLS ; break ;
+ }
+ }
+ if (cmd & PL_PCM_BREAK) { /* PCM has entered the BREAK state */
+ int reason;
+
+ reason = inpw(PLC(np,PL_STATUS_B)) & PL_BREAK_REASON ;
+
+ switch (reason) {
+ case PL_B_PCS : plc->b_pcs++ ; break ;
+ case PL_B_TPC : plc->b_tpc++ ; break ;
+ case PL_B_TNE : plc->b_tne++ ; break ;
+ case PL_B_QLS : plc->b_qls++ ; break ;
+ case PL_B_ILS : plc->b_ils++ ; break ;
+ case PL_B_HLS : plc->b_hls++ ; break ;
+ }
+
+ /*jd 05-Aug-1999 changed: Bug #10419 */
+ DB_PCMN(1,"PLC %d: MDcF = %x\n", np, smc->e.DisconnectFlag);
+ if (smc->e.DisconnectFlag == FALSE) {
+ DB_PCMN(1,"PLC %d: restart (reason %x)\n", np, reason);
+ queue_event(smc,EVENT_PCM+np,PC_START) ;
+ }
+ else {
+ DB_PCMN(1,"PLC %d: NO!! restart (reason %x)\n", np, reason);
+ }
+ return ;
+ }
+ /*
+ * If both CODE & ENABLE are set ignore enable
+ */
+ if (cmd & PL_PCM_CODE) { /* receive last sign.-bit | LCT complete */
+ queue_event(smc,EVENT_PCM+np,PC_SIGNAL) ;
+ n = inpw(PLC(np,PL_RCV_VECTOR)) ;
+ for (i = 0 ; i < plc->p_bits ; i++) {
+ phy->r_val[plc->p_start+i] = n & 1 ;
+ n >>= 1 ;
+ }
+ }
+ else if (cmd & PL_PCM_ENABLED) { /* asserted SC_JOIN, scrub.completed*/
+ queue_event(smc,EVENT_PCM+np,PC_JOIN) ;
+ }
+ if (cmd & PL_TRACE_PROP) { /* MLS while PC8_ACTIV || PC2_TRACE */
+ /*PC22b*/
+ if (!phy->tr_flag) {
+ DB_PCMN(1,"PCM : irq TRACE_PROP %d %d\n",
+ np,smc->mib.fddiSMTECMState) ;
+ phy->tr_flag = TRUE ;
+ smc->e.trace_prop |= ENTITY_BIT(ENTITY_PHY(np)) ;
+ queue_event(smc,EVENT_ECM,EC_TRACE_PROP) ;
+ }
+ }
+ /*
+ * filter PLC glitch ???
+ * QLS || HLS only while in PC2_TRACE state
+ */
+ if ((cmd & PL_SELF_TEST) && (phy->mib->fddiPORTPCMState == PC2_TRACE)) {
+ /*PC22a*/
+ if (smc->e.path_test == PT_PASSED) {
+ DB_PCMN(1,"PCM : state = %s %d\n", get_pcmstate(smc,np),
+ phy->mib->fddiPORTPCMState) ;
+
+ smc->e.path_test = PT_PENDING ;
+ queue_event(smc,EVENT_ECM,EC_PATH_TEST) ;
+ }
+ }
+ if (cmd & PL_TNE_EXPIRED) { /* TNE: length of noise events */
+ /* break_required (TNE > NS_Max) */
+ if (phy->mib->fddiPORTPCMState == PC8_ACTIVE) {
+ if (!phy->tr_flag) {
+ DB_PCMN(1,"PCM %c : PC81 %s\n",phy->phy_name,"NSE");
+ queue_event(smc,EVENT_PCM+np,PC_START) ;
+ return ;
+ }
+ }
+ }
+#if 0
+ if (cmd & PL_NP_ERR) { /* NP has requested to r/w an inv reg*/
+ /*
+ * It's a bug by AMD
+ */
+ plc->np_err++ ;
+ }
+ /* pin inactiv (GND) */
+ if (cmd & PL_PARITY_ERR) { /* p. error dedected on TX9-0 inp */
+ plc->parity_err++ ;
+ }
+ if (cmd & PL_LSDO) { /* carrier detected */
+ ;
+ }
+#endif
+}
+
+#ifdef DEBUG
+/*
+ * fill state struct
+ */
+void pcm_get_state(struct s_smc *smc, struct smt_state *state)
+{
+ struct s_phy *phy ;
+ struct pcm_state *pcs ;
+ int i ;
+ int ii ;
+ short rbits ;
+ short tbits ;
+ struct fddi_mib_p *mib ;
+
+ for (i = 0, phy = smc->y, pcs = state->pcm_state ; i < NUMPHYS ;
+ i++ , phy++, pcs++ ) {
+ mib = phy->mib ;
+ pcs->pcm_type = (u_char) mib->fddiPORTMy_Type ;
+ pcs->pcm_state = (u_char) mib->fddiPORTPCMState ;
+ pcs->pcm_mode = phy->pc_mode ;
+ pcs->pcm_neighbor = (u_char) mib->fddiPORTNeighborType ;
+ pcs->pcm_bsf = mib->fddiPORTBS_Flag ;
+ pcs->pcm_lsf = phy->ls_flag ;
+ pcs->pcm_lct_fail = (u_char) mib->fddiPORTLCTFail_Ct ;
+ pcs->pcm_ls_rx = LS2MIB(sm_pm_get_ls(smc,i)) ;
+ for (ii = 0, rbits = tbits = 0 ; ii < NUMBITS ; ii++) {
+ rbits <<= 1 ;
+ tbits <<= 1 ;
+ if (phy->r_val[NUMBITS-1-ii])
+ rbits |= 1 ;
+ if (phy->t_val[NUMBITS-1-ii])
+ tbits |= 1 ;
+ }
+ pcs->pcm_r_val = rbits ;
+ pcs->pcm_t_val = tbits ;
+ }
+}
+
+int get_pcm_state(struct s_smc *smc, int np)
+{
+ int pcs ;
+
+ SK_UNUSED(smc) ;
+
+ switch (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_STATE) {
+ case PL_PC0 : pcs = PC_STOP ; break ;
+ case PL_PC1 : pcs = PC_START ; break ;
+ case PL_PC2 : pcs = PC_TRACE ; break ;
+ case PL_PC3 : pcs = PC_SIGNAL ; break ;
+ case PL_PC4 : pcs = PC_SIGNAL ; break ;
+ case PL_PC5 : pcs = PC_SIGNAL ; break ;
+ case PL_PC6 : pcs = PC_JOIN ; break ;
+ case PL_PC7 : pcs = PC_JOIN ; break ;
+ case PL_PC8 : pcs = PC_ENABLE ; break ;
+ case PL_PC9 : pcs = PC_MAINT ; break ;
+ default : pcs = PC_DISABLE ; break ;
+ }
+ return pcs;
+}
+
+char *get_linestate(struct s_smc *smc, int np)
+{
+ char *ls = "" ;
+
+ SK_UNUSED(smc) ;
+
+ switch (inpw(PLC(np,PL_STATUS_A)) & PL_LINE_ST) {
+ case PL_L_NLS : ls = "NOISE" ; break ;
+ case PL_L_ALS : ls = "ACTIV" ; break ;
+ case PL_L_UND : ls = "UNDEF" ; break ;
+ case PL_L_ILS4: ls = "ILS 4" ; break ;
+ case PL_L_QLS : ls = "QLS" ; break ;
+ case PL_L_MLS : ls = "MLS" ; break ;
+ case PL_L_HLS : ls = "HLS" ; break ;
+ case PL_L_ILS16:ls = "ILS16" ; break ;
+#ifdef lint
+ default: ls = "unknown" ; break ;
+#endif
+ }
+ return ls;
+}
+
+char *get_pcmstate(struct s_smc *smc, int np)
+{
+ char *pcs ;
+
+ SK_UNUSED(smc) ;
+
+ switch (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_STATE) {
+ case PL_PC0 : pcs = "OFF" ; break ;
+ case PL_PC1 : pcs = "BREAK" ; break ;
+ case PL_PC2 : pcs = "TRACE" ; break ;
+ case PL_PC3 : pcs = "CONNECT"; break ;
+ case PL_PC4 : pcs = "NEXT" ; break ;
+ case PL_PC5 : pcs = "SIGNAL" ; break ;
+ case PL_PC6 : pcs = "JOIN" ; break ;
+ case PL_PC7 : pcs = "VERIFY" ; break ;
+ case PL_PC8 : pcs = "ACTIV" ; break ;
+ case PL_PC9 : pcs = "MAINT" ; break ;
+ default : pcs = "UNKNOWN" ; break ;
+ }
+ return pcs;
+}
+
+void list_phy(struct s_smc *smc)
+{
+ struct s_plc *plc ;
+ int np ;
+
+ for (np = 0 ; np < NUMPHYS ; np++) {
+ plc = &smc->y[np].plc ;
+ printf("PHY %d:\tERRORS\t\t\tBREAK_REASONS\t\tSTATES:\n",np) ;
+ printf("\tsoft_error: %ld \t\tPC_Start : %ld\n",
+ plc->soft_err,plc->b_pcs);
+ printf("\tparity_err: %ld \t\tTPC exp. : %ld\t\tLine: %s\n",
+ plc->parity_err,plc->b_tpc,get_linestate(smc,np)) ;
+ printf("\tebuf_error: %ld \t\tTNE exp. : %ld\n",
+ plc->ebuf_err,plc->b_tne) ;
+ printf("\tphyinvalid: %ld \t\tQLS det. : %ld\t\tPCM : %s\n",
+ plc->phyinv,plc->b_qls,get_pcmstate(smc,np)) ;
+ printf("\tviosym_ctr: %ld \t\tILS det. : %ld\n",
+ plc->vsym_ctr,plc->b_ils) ;
+ printf("\tmingap_ctr: %ld \t\tHLS det. : %ld\n",
+ plc->mini_ctr,plc->b_hls) ;
+ printf("\tnodepr_err: %ld\n",plc->np_err) ;
+ printf("\tTPC_exp : %ld\n",plc->tpc_exp) ;
+ printf("\tLEM_err : %ld\n",smc->y[np].lem.lem_errors) ;
+ }
+}
+
+
+#ifdef CONCENTRATOR
+void pcm_lem_dump(struct s_smc *smc)
+{
+ int i ;
+ struct s_phy *phy ;
+ struct fddi_mib_p *mib ;
+
+ char *entostring() ;
+
+ printf("PHY errors BER\n") ;
+ printf("----------------------\n") ;
+ for (i = 0,phy = smc->y ; i < NUMPHYS ; i++,phy++) {
+ if (!plc_is_installed(smc,i))
+ continue ;
+ mib = phy->mib ;
+ printf("%s\t%ld\t10E-%d\n",
+ entostring(smc,ENTITY_PHY(i)),
+ mib->fddiPORTLem_Ct,
+ mib->fddiPORTLer_Estimate) ;
+ }
+}
+#endif
+#endif
diff --git a/drivers/net/fddi/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c
new file mode 100644
index 000000000..441b4dc79
--- /dev/null
+++ b/drivers/net/fddi/skfp/pmf.c
@@ -0,0 +1,1663 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ Parameter Management Frame processing for SMT 7.2
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef SLIM_SMT
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)pmf.c 1.37 97/08/04 (C) SK " ;
+#endif
+
+static int smt_authorize(struct s_smc *smc, struct smt_header *sm);
+static int smt_check_set_count(struct s_smc *smc, struct smt_header *sm);
+static const struct s_p_tab* smt_get_ptab(u_short para);
+static int smt_mib_phys(struct s_smc *smc);
+static int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index,
+ int local, int set);
+void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
+ int index, int local);
+static SMbuf *smt_build_pmf_response(struct s_smc *smc, struct smt_header *req,
+ int set, int local);
+static int port_to_mib(struct s_smc *smc, int p);
+
+#define MOFFSS(e) offsetof(struct fddi_mib, e)
+#define MOFFMS(e) offsetof(struct fddi_mib_m, e)
+#define MOFFAS(e) offsetof(struct fddi_mib_a, e)
+#define MOFFPS(e) offsetof(struct fddi_mib_p, e)
+
+
+#define AC_G 0x01 /* Get */
+#define AC_GR 0x02 /* Get/Set */
+#define AC_S 0x04 /* Set */
+#define AC_NA 0x08
+#define AC_GROUP 0x10 /* Group */
+#define MS2BCLK(x) ((x)*12500L)
+/*
+ F LFag (byte)
+ B byte
+ S u_short 16 bit
+ C Counter 32 bit
+ L Long 32 bit
+ T Timer_2 32 bit
+ P TimeStamp ;
+ A LongAddress (6 byte)
+ E Enum 16 bit
+ R ResId 16 Bit
+*/
+static const struct s_p_tab {
+ u_short p_num ; /* parameter code */
+ u_char p_access ; /* access rights */
+ u_short p_offset ; /* offset in mib */
+ char p_swap[3] ; /* format string */
+} p_tab[] = {
+ /* StationIdGrp */
+ { SMT_P100A,AC_GROUP } ,
+ { SMT_P100B,AC_G, MOFFSS(fddiSMTStationId), "8" } ,
+ { SMT_P100D,AC_G, MOFFSS(fddiSMTOpVersionId), "S" } ,
+ { SMT_P100E,AC_G, MOFFSS(fddiSMTHiVersionId), "S" } ,
+ { SMT_P100F,AC_G, MOFFSS(fddiSMTLoVersionId), "S" } ,
+ { SMT_P1010,AC_G, MOFFSS(fddiSMTManufacturerData), "D" } ,
+ { SMT_P1011,AC_GR, MOFFSS(fddiSMTUserData), "D" } ,
+ { SMT_P1012,AC_G, MOFFSS(fddiSMTMIBVersionId), "S" } ,
+
+ /* StationConfigGrp */
+ { SMT_P1014,AC_GROUP } ,
+ { SMT_P1015,AC_G, MOFFSS(fddiSMTMac_Ct), "B" } ,
+ { SMT_P1016,AC_G, MOFFSS(fddiSMTNonMaster_Ct), "B" } ,
+ { SMT_P1017,AC_G, MOFFSS(fddiSMTMaster_Ct), "B" } ,
+ { SMT_P1018,AC_G, MOFFSS(fddiSMTAvailablePaths), "B" } ,
+ { SMT_P1019,AC_G, MOFFSS(fddiSMTConfigCapabilities),"S" } ,
+ { SMT_P101A,AC_GR, MOFFSS(fddiSMTConfigPolicy), "wS" } ,
+ { SMT_P101B,AC_GR, MOFFSS(fddiSMTConnectionPolicy),"wS" } ,
+ { SMT_P101D,AC_GR, MOFFSS(fddiSMTTT_Notify), "wS" } ,
+ { SMT_P101E,AC_GR, MOFFSS(fddiSMTStatRptPolicy), "bB" } ,
+ { SMT_P101F,AC_GR, MOFFSS(fddiSMTTrace_MaxExpiration),"lL" } ,
+ { SMT_P1020,AC_G, MOFFSS(fddiSMTPORTIndexes), "II" } ,
+ { SMT_P1021,AC_G, MOFFSS(fddiSMTMACIndexes), "I" } ,
+ { SMT_P1022,AC_G, MOFFSS(fddiSMTBypassPresent), "F" } ,
+
+ /* StatusGrp */
+ { SMT_P1028,AC_GROUP } ,
+ { SMT_P1029,AC_G, MOFFSS(fddiSMTECMState), "E" } ,
+ { SMT_P102A,AC_G, MOFFSS(fddiSMTCF_State), "E" } ,
+ { SMT_P102C,AC_G, MOFFSS(fddiSMTRemoteDisconnectFlag),"F" } ,
+ { SMT_P102D,AC_G, MOFFSS(fddiSMTStationStatus), "E" } ,
+ { SMT_P102E,AC_G, MOFFSS(fddiSMTPeerWrapFlag), "F" } ,
+
+ /* MIBOperationGrp */
+ { SMT_P1032,AC_GROUP } ,
+ { SMT_P1033,AC_G, MOFFSS(fddiSMTTimeStamp),"P" } ,
+ { SMT_P1034,AC_G, MOFFSS(fddiSMTTransitionTimeStamp),"P" } ,
+ /* NOTE : SMT_P1035 is already swapped ! SMT_P_SETCOUNT */
+ { SMT_P1035,AC_G, MOFFSS(fddiSMTSetCount),"4P" } ,
+ { SMT_P1036,AC_G, MOFFSS(fddiSMTLastSetStationId),"8" } ,
+
+ { SMT_P103C,AC_S, 0, "wS" } ,
+
+ /*
+ * PRIVATE EXTENSIONS
+ * only accessible locally to get/set passwd
+ */
+ { SMT_P10F0,AC_GR, MOFFSS(fddiPRPMFPasswd), "8" } ,
+ { SMT_P10F1,AC_GR, MOFFSS(fddiPRPMFStation), "8" } ,
+#ifdef ESS
+ { SMT_P10F2,AC_GR, MOFFSS(fddiESSPayload), "lL" } ,
+ { SMT_P10F3,AC_GR, MOFFSS(fddiESSOverhead), "lL" } ,
+ { SMT_P10F4,AC_GR, MOFFSS(fddiESSMaxTNeg), "lL" } ,
+ { SMT_P10F5,AC_GR, MOFFSS(fddiESSMinSegmentSize), "lL" } ,
+ { SMT_P10F6,AC_GR, MOFFSS(fddiESSCategory), "lL" } ,
+ { SMT_P10F7,AC_GR, MOFFSS(fddiESSSynchTxMode), "wS" } ,
+#endif
+#ifdef SBA
+ { SMT_P10F8,AC_GR, MOFFSS(fddiSBACommand), "bF" } ,
+ { SMT_P10F9,AC_GR, MOFFSS(fddiSBAAvailable), "bF" } ,
+#endif
+ /* MAC Attributes */
+ { SMT_P200A,AC_GROUP } ,
+ { SMT_P200B,AC_G, MOFFMS(fddiMACFrameStatusFunctions),"S" } ,
+ { SMT_P200D,AC_G, MOFFMS(fddiMACT_MaxCapabilitiy),"T" } ,
+ { SMT_P200E,AC_G, MOFFMS(fddiMACTVXCapabilitiy),"T" } ,
+
+ /* ConfigGrp */
+ { SMT_P2014,AC_GROUP } ,
+ { SMT_P2016,AC_G, MOFFMS(fddiMACAvailablePaths), "B" } ,
+ { SMT_P2017,AC_G, MOFFMS(fddiMACCurrentPath), "S" } ,
+ { SMT_P2018,AC_G, MOFFMS(fddiMACUpstreamNbr), "A" } ,
+ { SMT_P2019,AC_G, MOFFMS(fddiMACDownstreamNbr), "A" } ,
+ { SMT_P201A,AC_G, MOFFMS(fddiMACOldUpstreamNbr), "A" } ,
+ { SMT_P201B,AC_G, MOFFMS(fddiMACOldDownstreamNbr),"A" } ,
+ { SMT_P201D,AC_G, MOFFMS(fddiMACDupAddressTest), "E" } ,
+ { SMT_P2020,AC_GR, MOFFMS(fddiMACRequestedPaths), "wS" } ,
+ { SMT_P2021,AC_G, MOFFMS(fddiMACDownstreamPORTType),"E" } ,
+ { SMT_P2022,AC_G, MOFFMS(fddiMACIndex), "S" } ,
+
+ /* AddressGrp */
+ { SMT_P2028,AC_GROUP } ,
+ { SMT_P2029,AC_G, MOFFMS(fddiMACSMTAddress), "A" } ,
+
+ /* OperationGrp */
+ { SMT_P2032,AC_GROUP } ,
+ { SMT_P2033,AC_G, MOFFMS(fddiMACT_Req), "T" } ,
+ { SMT_P2034,AC_G, MOFFMS(fddiMACT_Neg), "T" } ,
+ { SMT_P2035,AC_G, MOFFMS(fddiMACT_Max), "T" } ,
+ { SMT_P2036,AC_G, MOFFMS(fddiMACTvxValue), "T" } ,
+ { SMT_P2038,AC_G, MOFFMS(fddiMACT_Pri0), "T" } ,
+ { SMT_P2039,AC_G, MOFFMS(fddiMACT_Pri1), "T" } ,
+ { SMT_P203A,AC_G, MOFFMS(fddiMACT_Pri2), "T" } ,
+ { SMT_P203B,AC_G, MOFFMS(fddiMACT_Pri3), "T" } ,
+ { SMT_P203C,AC_G, MOFFMS(fddiMACT_Pri4), "T" } ,
+ { SMT_P203D,AC_G, MOFFMS(fddiMACT_Pri5), "T" } ,
+ { SMT_P203E,AC_G, MOFFMS(fddiMACT_Pri6), "T" } ,
+
+
+ /* CountersGrp */
+ { SMT_P2046,AC_GROUP } ,
+ { SMT_P2047,AC_G, MOFFMS(fddiMACFrame_Ct), "C" } ,
+ { SMT_P2048,AC_G, MOFFMS(fddiMACCopied_Ct), "C" } ,
+ { SMT_P2049,AC_G, MOFFMS(fddiMACTransmit_Ct), "C" } ,
+ { SMT_P204A,AC_G, MOFFMS(fddiMACToken_Ct), "C" } ,
+ { SMT_P2051,AC_G, MOFFMS(fddiMACError_Ct), "C" } ,
+ { SMT_P2052,AC_G, MOFFMS(fddiMACLost_Ct), "C" } ,
+ { SMT_P2053,AC_G, MOFFMS(fddiMACTvxExpired_Ct), "C" } ,
+ { SMT_P2054,AC_G, MOFFMS(fddiMACNotCopied_Ct), "C" } ,
+ { SMT_P2056,AC_G, MOFFMS(fddiMACRingOp_Ct), "C" } ,
+
+ /* FrameErrorConditionGrp */
+ { SMT_P205A,AC_GROUP } ,
+ { SMT_P205F,AC_GR, MOFFMS(fddiMACFrameErrorThreshold),"wS" } ,
+ { SMT_P2060,AC_G, MOFFMS(fddiMACFrameErrorRatio), "S" } ,
+
+ /* NotCopiedConditionGrp */
+ { SMT_P2064,AC_GROUP } ,
+ { SMT_P2067,AC_GR, MOFFMS(fddiMACNotCopiedThreshold),"wS" } ,
+ { SMT_P2069,AC_G, MOFFMS(fddiMACNotCopiedRatio), "S" } ,
+
+ /* StatusGrp */
+ { SMT_P206E,AC_GROUP } ,
+ { SMT_P206F,AC_G, MOFFMS(fddiMACRMTState), "S" } ,
+ { SMT_P2070,AC_G, MOFFMS(fddiMACDA_Flag), "F" } ,
+ { SMT_P2071,AC_G, MOFFMS(fddiMACUNDA_Flag), "F" } ,
+ { SMT_P2072,AC_G, MOFFMS(fddiMACFrameErrorFlag), "F" } ,
+ { SMT_P2073,AC_G, MOFFMS(fddiMACNotCopiedFlag), "F" } ,
+ { SMT_P2074,AC_G, MOFFMS(fddiMACMA_UnitdataAvailable),"F" } ,
+ { SMT_P2075,AC_G, MOFFMS(fddiMACHardwarePresent), "F" } ,
+ { SMT_P2076,AC_GR, MOFFMS(fddiMACMA_UnitdataEnable),"bF" } ,
+
+ /*
+ * PRIVATE EXTENSIONS
+ * only accessible locally to get/set TMIN
+ */
+ { SMT_P20F0,AC_NA } ,
+ { SMT_P20F1,AC_GR, MOFFMS(fddiMACT_Min), "lT" } ,
+
+ /* Path Attributes */
+ /*
+ * DON't swap 320B,320F,3210: they are already swapped in swap_para()
+ */
+ { SMT_P320A,AC_GROUP } ,
+ { SMT_P320B,AC_G, MOFFAS(fddiPATHIndex), "r" } ,
+ { SMT_P320F,AC_GR, MOFFAS(fddiPATHSbaPayload), "l4" } ,
+ { SMT_P3210,AC_GR, MOFFAS(fddiPATHSbaOverhead), "l4" } ,
+ /* fddiPATHConfiguration */
+ { SMT_P3212,AC_G, 0, "" } ,
+ { SMT_P3213,AC_GR, MOFFAS(fddiPATHT_Rmode), "lT" } ,
+ { SMT_P3214,AC_GR, MOFFAS(fddiPATHSbaAvailable), "lL" } ,
+ { SMT_P3215,AC_GR, MOFFAS(fddiPATHTVXLowerBound), "lT" } ,
+ { SMT_P3216,AC_GR, MOFFAS(fddiPATHT_MaxLowerBound),"lT" } ,
+ { SMT_P3217,AC_GR, MOFFAS(fddiPATHMaxT_Req), "lT" } ,
+
+ /* Port Attributes */
+ /* ConfigGrp */
+ { SMT_P400A,AC_GROUP } ,
+ { SMT_P400C,AC_G, MOFFPS(fddiPORTMy_Type), "E" } ,
+ { SMT_P400D,AC_G, MOFFPS(fddiPORTNeighborType), "E" } ,
+ { SMT_P400E,AC_GR, MOFFPS(fddiPORTConnectionPolicies),"bB" } ,
+ { SMT_P400F,AC_G, MOFFPS(fddiPORTMacIndicated), "2" } ,
+ { SMT_P4010,AC_G, MOFFPS(fddiPORTCurrentPath), "E" } ,
+ { SMT_P4011,AC_GR, MOFFPS(fddiPORTRequestedPaths), "l4" } ,
+ { SMT_P4012,AC_G, MOFFPS(fddiPORTMACPlacement), "S" } ,
+ { SMT_P4013,AC_G, MOFFPS(fddiPORTAvailablePaths), "B" } ,
+ { SMT_P4016,AC_G, MOFFPS(fddiPORTPMDClass), "E" } ,
+ { SMT_P4017,AC_G, MOFFPS(fddiPORTConnectionCapabilities), "B"} ,
+ { SMT_P401D,AC_G, MOFFPS(fddiPORTIndex), "R" } ,
+
+ /* OperationGrp */
+ { SMT_P401E,AC_GROUP } ,
+ { SMT_P401F,AC_GR, MOFFPS(fddiPORTMaint_LS), "wE" } ,
+ { SMT_P4021,AC_G, MOFFPS(fddiPORTBS_Flag), "F" } ,
+ { SMT_P4022,AC_G, MOFFPS(fddiPORTPC_LS), "E" } ,
+
+ /* ErrorCtrsGrp */
+ { SMT_P4028,AC_GROUP } ,
+ { SMT_P4029,AC_G, MOFFPS(fddiPORTEBError_Ct), "C" } ,
+ { SMT_P402A,AC_G, MOFFPS(fddiPORTLCTFail_Ct), "C" } ,
+
+ /* LerGrp */
+ { SMT_P4032,AC_GROUP } ,
+ { SMT_P4033,AC_G, MOFFPS(fddiPORTLer_Estimate), "F" } ,
+ { SMT_P4034,AC_G, MOFFPS(fddiPORTLem_Reject_Ct), "C" } ,
+ { SMT_P4035,AC_G, MOFFPS(fddiPORTLem_Ct), "C" } ,
+ { SMT_P403A,AC_GR, MOFFPS(fddiPORTLer_Cutoff), "bB" } ,
+ { SMT_P403B,AC_GR, MOFFPS(fddiPORTLer_Alarm), "bB" } ,
+
+ /* StatusGrp */
+ { SMT_P403C,AC_GROUP } ,
+ { SMT_P403D,AC_G, MOFFPS(fddiPORTConnectState), "E" } ,
+ { SMT_P403E,AC_G, MOFFPS(fddiPORTPCMStateX), "E" } ,
+ { SMT_P403F,AC_G, MOFFPS(fddiPORTPC_Withhold), "E" } ,
+ { SMT_P4040,AC_G, MOFFPS(fddiPORTLerFlag), "F" } ,
+ { SMT_P4041,AC_G, MOFFPS(fddiPORTHardwarePresent),"F" } ,
+
+ { SMT_P4046,AC_S, 0, "wS" } ,
+
+ { 0, AC_GROUP } ,
+ { 0 }
+} ;
+
+void smt_pmf_received_pack(struct s_smc *smc, SMbuf *mb, int local)
+{
+ struct smt_header *sm ;
+ SMbuf *reply ;
+
+ sm = smtod(mb,struct smt_header *) ;
+ DB_SMT("SMT: processing PMF frame at %x len %d\n",sm,mb->sm_len) ;
+#ifdef DEBUG
+ dump_smt(smc,sm,"PMF Received") ;
+#endif
+ /*
+ * Start the watchdog: It may be a long, long packet and
+ * maybe the watchdog occurs ...
+ */
+ smt_start_watchdog(smc) ;
+
+ if (sm->smt_class == SMT_PMF_GET ||
+ sm->smt_class == SMT_PMF_SET) {
+ reply = smt_build_pmf_response(smc,sm,
+ sm->smt_class == SMT_PMF_SET,local) ;
+ if (reply) {
+ sm = smtod(reply,struct smt_header *) ;
+#ifdef DEBUG
+ dump_smt(smc,sm,"PMF Reply") ;
+#endif
+ smt_send_frame(smc,reply,FC_SMT_INFO,local) ;
+ }
+ }
+}
+
+static SMbuf *smt_build_pmf_response(struct s_smc *smc, struct smt_header *req,
+ int set, int local)
+{
+ SMbuf *mb ;
+ struct smt_header *smt ;
+ struct smt_para *pa ;
+ struct smt_p_reason *res ;
+ const struct s_p_tab *pt ;
+ int len ;
+ int index ;
+ int idx_end ;
+ int error ;
+ int range ;
+ SK_LOC_DECL(struct s_pcon,pcon) ;
+ SK_LOC_DECL(struct s_pcon,set_pcon) ;
+
+ /*
+ * build SMT header
+ */
+ if (!(mb = smt_get_mbuf(smc)))
+ return mb;
+
+ smt = smtod(mb, struct smt_header *) ;
+ smt->smt_dest = req->smt_source ; /* DA == source of request */
+ smt->smt_class = req->smt_class ; /* same class (GET/SET) */
+ smt->smt_type = SMT_REPLY ;
+ smt->smt_version = SMT_VID_2 ;
+ smt->smt_tid = req->smt_tid ; /* same TID */
+ smt->smt_pad = 0 ;
+ smt->smt_len = 0 ;
+
+ /*
+ * setup parameter status
+ */
+ pcon.pc_len = SMT_MAX_INFO_LEN ; /* max para length */
+ pcon.pc_err = 0 ; /* no error */
+ pcon.pc_badset = 0 ; /* no bad set count */
+ pcon.pc_p = (void *) (smt + 1) ; /* paras start here */
+
+ /*
+ * check authoriziation and set count
+ */
+ error = 0 ;
+ if (set) {
+ if (!local && smt_authorize(smc,req))
+ error = SMT_RDF_AUTHOR ;
+ else if (smt_check_set_count(smc,req))
+ pcon.pc_badset = SMT_RDF_BADSET ;
+ }
+ /*
+ * add reason code and all mandatory parameters
+ */
+ res = (struct smt_p_reason *) pcon.pc_p ;
+ smt_add_para(smc,&pcon,(u_short) SMT_P_REASON,0,0) ;
+ smt_add_para(smc,&pcon,(u_short) SMT_P1033,0,0) ;
+ /* update 1035 and 1036 later if set */
+ set_pcon = pcon ;
+ smt_add_para(smc,&pcon,(u_short) SMT_P1035,0,0) ;
+ smt_add_para(smc,&pcon,(u_short) SMT_P1036,0,0) ;
+
+ pcon.pc_err = error ;
+ len = req->smt_len ;
+ pa = (struct smt_para *) (req + 1) ;
+ /*
+ * process list of paras
+ */
+ while (!pcon.pc_err && len > 0 ) {
+ if (((u_short)len < pa->p_len + PARA_LEN) || (pa->p_len & 3)) {
+ pcon.pc_err = SMT_RDF_LENGTH ;
+ break ;
+ }
+
+ if (((range = (pa->p_type & 0xf000)) == 0x2000) ||
+ range == 0x3000 || range == 0x4000) {
+ /*
+ * get index for PART,MAC ad PATH group
+ */
+ index = *((u_char *)pa + PARA_LEN + 3) ;/* index */
+ idx_end = index ;
+ if (!set && (pa->p_len != 4)) {
+ pcon.pc_err = SMT_RDF_LENGTH ;
+ break ;
+ }
+ if (!index && !set) {
+ switch (range) {
+ case 0x2000 :
+ index = INDEX_MAC ;
+ idx_end = index - 1 + NUMMACS ;
+ break ;
+ case 0x3000 :
+ index = INDEX_PATH ;
+ idx_end = index - 1 + NUMPATHS ;
+ break ;
+ case 0x4000 :
+ index = INDEX_PORT ;
+ idx_end = index - 1 + NUMPHYS ;
+#ifndef CONCENTRATOR
+ if (smc->s.sas == SMT_SAS)
+ idx_end = INDEX_PORT ;
+#endif
+ break ;
+ }
+ }
+ }
+ else {
+ /*
+ * smt group has no index
+ */
+ if (!set && (pa->p_len != 0)) {
+ pcon.pc_err = SMT_RDF_LENGTH ;
+ break ;
+ }
+ index = 0 ;
+ idx_end = 0 ;
+ }
+ while (index <= idx_end) {
+ /*
+ * if group
+ * add all paras of group
+ */
+ pt = smt_get_ptab(pa->p_type) ;
+ if (pt && pt->p_access == AC_GROUP && !set) {
+ pt++ ;
+ while (pt->p_access == AC_G ||
+ pt->p_access == AC_GR) {
+ smt_add_para(smc,&pcon,pt->p_num,
+ index,local);
+ pt++ ;
+ }
+ }
+ /*
+ * ignore
+ * AUTHORIZATION in get/set
+ * SET COUNT in set
+ */
+ else if (pa->p_type != SMT_P_AUTHOR &&
+ (!set || (pa->p_type != SMT_P1035))) {
+ int st ;
+ if (pcon.pc_badset) {
+ smt_add_para(smc,&pcon,pa->p_type,
+ index,local) ;
+ }
+ else if (set) {
+ st = smt_set_para(smc,pa,index,local,1);
+ /*
+ * return para even if error
+ */
+ smt_add_para(smc,&pcon,pa->p_type,
+ index,local) ;
+ pcon.pc_err = st ;
+ }
+ else {
+ if (pt && pt->p_access == AC_S) {
+ pcon.pc_err =
+ SMT_RDF_ILLEGAL ;
+ }
+ smt_add_para(smc,&pcon,pa->p_type,
+ index,local) ;
+ }
+ }
+ if (pcon.pc_err)
+ break ;
+ index++ ;
+ }
+ len -= pa->p_len + PARA_LEN ;
+ pa = (struct smt_para *) ((char *)pa + pa->p_len + PARA_LEN) ;
+ }
+ smt->smt_len = SMT_MAX_INFO_LEN - pcon.pc_len ;
+ mb->sm_len = smt->smt_len + sizeof(struct smt_header) ;
+
+ /* update reason code */
+ res->rdf_reason = pcon.pc_badset ? pcon.pc_badset :
+ pcon.pc_err ? pcon.pc_err : SMT_RDF_SUCCESS ;
+ if (set && (res->rdf_reason == SMT_RDF_SUCCESS)) {
+ /*
+ * increment set count
+ * set time stamp
+ * store station id of last set
+ */
+ smc->mib.fddiSMTSetCount.count++ ;
+ smt_set_timestamp(smc,smc->mib.fddiSMTSetCount.timestamp) ;
+ smc->mib.fddiSMTLastSetStationId = req->smt_sid ;
+ smt_add_para(smc,&set_pcon,(u_short) SMT_P1035,0,0) ;
+ smt_add_para(smc,&set_pcon,(u_short) SMT_P1036,0,0) ;
+ }
+ return mb;
+}
+
+static int smt_authorize(struct s_smc *smc, struct smt_header *sm)
+{
+ struct smt_para *pa ;
+ int i ;
+ char *p ;
+
+ /*
+ * check source station id if not zero
+ */
+ p = (char *) &smc->mib.fddiPRPMFStation ;
+ for (i = 0 ; i < 8 && !p[i] ; i++)
+ ;
+ if (i != 8) {
+ if (memcmp((char *) &sm->smt_sid,
+ (char *) &smc->mib.fddiPRPMFStation,8))
+ return 1;
+ }
+ /*
+ * check authoriziation parameter if passwd not zero
+ */
+ p = (char *) smc->mib.fddiPRPMFPasswd ;
+ for (i = 0 ; i < 8 && !p[i] ; i++)
+ ;
+ if (i != 8) {
+ pa = (struct smt_para *) sm_to_para(smc,sm,SMT_P_AUTHOR) ;
+ if (!pa)
+ return 1;
+ if (pa->p_len != 8)
+ return 1;
+ if (memcmp((char *)(pa+1),(char *)smc->mib.fddiPRPMFPasswd,8))
+ return 1;
+ }
+ return 0;
+}
+
+static int smt_check_set_count(struct s_smc *smc, struct smt_header *sm)
+{
+ struct smt_para *pa ;
+ struct smt_p_setcount *sc ;
+
+ pa = (struct smt_para *) sm_to_para(smc,sm,SMT_P1035) ;
+ if (pa) {
+ sc = (struct smt_p_setcount *) pa ;
+ if ((smc->mib.fddiSMTSetCount.count != sc->count) ||
+ memcmp((char *) smc->mib.fddiSMTSetCount.timestamp,
+ (char *)sc->timestamp,8))
+ return 1;
+ }
+ return 0;
+}
+
+void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
+ int index, int local)
+{
+ struct smt_para *pa ;
+ const struct s_p_tab *pt ;
+ struct fddi_mib_m *mib_m = NULL;
+ struct fddi_mib_p *mib_p = NULL;
+ int len ;
+ int plen ;
+ char *from ;
+ char *to ;
+ const char *swap ;
+ char c ;
+ int range ;
+ char *mib_addr ;
+ int mac ;
+ int path ;
+ int port ;
+ int sp_len ;
+
+ /*
+ * skip if error
+ */
+ if (pcon->pc_err)
+ return ;
+
+ /*
+ * actions don't have a value
+ */
+ pt = smt_get_ptab(para) ;
+ if (pt && pt->p_access == AC_S)
+ return ;
+
+ to = (char *) (pcon->pc_p) ; /* destination pointer */
+ len = pcon->pc_len ; /* free space */
+ plen = len ; /* remember start length */
+ pa = (struct smt_para *) to ; /* type/length pointer */
+ to += PARA_LEN ; /* skip smt_para */
+ len -= PARA_LEN ;
+ /*
+ * set index if required
+ */
+ if (((range = (para & 0xf000)) == 0x2000) ||
+ range == 0x3000 || range == 0x4000) {
+ if (len < 4)
+ goto wrong_error ;
+ to[0] = 0 ;
+ to[1] = 0 ;
+ to[2] = 0 ;
+ to[3] = index ;
+ len -= 4 ;
+ to += 4 ;
+ }
+ mac = index - INDEX_MAC ;
+ path = index - INDEX_PATH ;
+ port = index - INDEX_PORT ;
+ /*
+ * get pointer to mib
+ */
+ switch (range) {
+ case 0x1000 :
+ default :
+ mib_addr = (char *) (&smc->mib) ;
+ break ;
+ case 0x2000 :
+ if (mac < 0 || mac >= NUMMACS) {
+ pcon->pc_err = SMT_RDF_NOPARAM ;
+ return ;
+ }
+ mib_addr = (char *) (&smc->mib.m[mac]) ;
+ mib_m = (struct fddi_mib_m *) mib_addr ;
+ break ;
+ case 0x3000 :
+ if (path < 0 || path >= NUMPATHS) {
+ pcon->pc_err = SMT_RDF_NOPARAM ;
+ return ;
+ }
+ mib_addr = (char *) (&smc->mib.a[path]) ;
+ break ;
+ case 0x4000 :
+ if (port < 0 || port >= smt_mib_phys(smc)) {
+ pcon->pc_err = SMT_RDF_NOPARAM ;
+ return ;
+ }
+ mib_addr = (char *) (&smc->mib.p[port_to_mib(smc,port)]) ;
+ mib_p = (struct fddi_mib_p *) mib_addr ;
+ break ;
+ }
+ /*
+ * check special paras
+ */
+ swap = NULL;
+ switch (para) {
+ case SMT_P10F0 :
+ case SMT_P10F1 :
+#ifdef ESS
+ case SMT_P10F2 :
+ case SMT_P10F3 :
+ case SMT_P10F4 :
+ case SMT_P10F5 :
+ case SMT_P10F6 :
+ case SMT_P10F7 :
+#endif
+#ifdef SBA
+ case SMT_P10F8 :
+ case SMT_P10F9 :
+#endif
+ case SMT_P20F1 :
+ if (!local) {
+ pcon->pc_err = SMT_RDF_NOPARAM ;
+ return ;
+ }
+ break ;
+ case SMT_P2034 :
+ case SMT_P2046 :
+ case SMT_P2047 :
+ case SMT_P204A :
+ case SMT_P2051 :
+ case SMT_P2052 :
+ mac_update_counter(smc) ;
+ break ;
+ case SMT_P4022:
+ mib_p->fddiPORTPC_LS = LS2MIB(
+ sm_pm_get_ls(smc,port_to_mib(smc,port))) ;
+ break ;
+ case SMT_P_REASON :
+ *(u32 *)to = 0 ;
+ sp_len = 4 ;
+ goto sp_done ;
+ case SMT_P1033 : /* time stamp */
+ smt_set_timestamp(smc,smc->mib.fddiSMTTimeStamp) ;
+ break ;
+
+ case SMT_P1020: /* port indexes */
+#if NUMPHYS == 12
+ swap = "IIIIIIIIIIII" ;
+#else
+#if NUMPHYS == 2
+ if (smc->s.sas == SMT_SAS)
+ swap = "I" ;
+ else
+ swap = "II" ;
+#else
+#if NUMPHYS == 24
+ swap = "IIIIIIIIIIIIIIIIIIIIIIII" ;
+#else
+ ????
+#endif
+#endif
+#endif
+ break ;
+ case SMT_P3212 :
+ {
+ sp_len = cem_build_path(smc,to,path) ;
+ goto sp_done ;
+ }
+ case SMT_P1048 : /* peer wrap condition */
+ {
+ struct smt_p_1048 *sp ;
+ sp = (struct smt_p_1048 *) to ;
+ sp->p1048_flag = smc->mib.fddiSMTPeerWrapFlag ;
+ sp->p1048_cf_state = smc->mib.fddiSMTCF_State ;
+ sp_len = sizeof(struct smt_p_1048) ;
+ goto sp_done ;
+ }
+ case SMT_P208C :
+ {
+ struct smt_p_208c *sp ;
+ sp = (struct smt_p_208c *) to ;
+ sp->p208c_flag =
+ smc->mib.m[MAC0].fddiMACDuplicateAddressCond ;
+ sp->p208c_dupcondition =
+ (mib_m->fddiMACDA_Flag ? SMT_ST_MY_DUPA : 0) |
+ (mib_m->fddiMACUNDA_Flag ? SMT_ST_UNA_DUPA : 0);
+ sp->p208c_fddilong =
+ mib_m->fddiMACSMTAddress ;
+ sp->p208c_fddiunalong =
+ mib_m->fddiMACUpstreamNbr ;
+ sp->p208c_pad = 0 ;
+ sp_len = sizeof(struct smt_p_208c) ;
+ goto sp_done ;
+ }
+ case SMT_P208D : /* frame error condition */
+ {
+ struct smt_p_208d *sp ;
+ sp = (struct smt_p_208d *) to ;
+ sp->p208d_flag =
+ mib_m->fddiMACFrameErrorFlag ;
+ sp->p208d_frame_ct =
+ mib_m->fddiMACFrame_Ct ;
+ sp->p208d_error_ct =
+ mib_m->fddiMACError_Ct ;
+ sp->p208d_lost_ct =
+ mib_m->fddiMACLost_Ct ;
+ sp->p208d_ratio =
+ mib_m->fddiMACFrameErrorRatio ;
+ sp_len = sizeof(struct smt_p_208d) ;
+ goto sp_done ;
+ }
+ case SMT_P208E : /* not copied condition */
+ {
+ struct smt_p_208e *sp ;
+ sp = (struct smt_p_208e *) to ;
+ sp->p208e_flag =
+ mib_m->fddiMACNotCopiedFlag ;
+ sp->p208e_not_copied =
+ mib_m->fddiMACNotCopied_Ct ;
+ sp->p208e_copied =
+ mib_m->fddiMACCopied_Ct ;
+ sp->p208e_not_copied_ratio =
+ mib_m->fddiMACNotCopiedRatio ;
+ sp_len = sizeof(struct smt_p_208e) ;
+ goto sp_done ;
+ }
+ case SMT_P208F : /* neighbor change event */
+ {
+ struct smt_p_208f *sp ;
+ sp = (struct smt_p_208f *) to ;
+ sp->p208f_multiple =
+ mib_m->fddiMACMultiple_N ;
+ sp->p208f_nacondition =
+ mib_m->fddiMACDuplicateAddressCond ;
+ sp->p208f_old_una =
+ mib_m->fddiMACOldUpstreamNbr ;
+ sp->p208f_new_una =
+ mib_m->fddiMACUpstreamNbr ;
+ sp->p208f_old_dna =
+ mib_m->fddiMACOldDownstreamNbr ;
+ sp->p208f_new_dna =
+ mib_m->fddiMACDownstreamNbr ;
+ sp->p208f_curren_path =
+ mib_m->fddiMACCurrentPath ;
+ sp->p208f_smt_address =
+ mib_m->fddiMACSMTAddress ;
+ sp_len = sizeof(struct smt_p_208f) ;
+ goto sp_done ;
+ }
+ case SMT_P2090 :
+ {
+ struct smt_p_2090 *sp ;
+ sp = (struct smt_p_2090 *) to ;
+ sp->p2090_multiple =
+ mib_m->fddiMACMultiple_P ;
+ sp->p2090_availablepaths =
+ mib_m->fddiMACAvailablePaths ;
+ sp->p2090_currentpath =
+ mib_m->fddiMACCurrentPath ;
+ sp->p2090_requestedpaths =
+ mib_m->fddiMACRequestedPaths ;
+ sp_len = sizeof(struct smt_p_2090) ;
+ goto sp_done ;
+ }
+ case SMT_P4050 :
+ {
+ struct smt_p_4050 *sp ;
+ sp = (struct smt_p_4050 *) to ;
+ sp->p4050_flag =
+ mib_p->fddiPORTLerFlag ;
+ sp->p4050_pad = 0 ;
+ sp->p4050_cutoff =
+ mib_p->fddiPORTLer_Cutoff ;
+ sp->p4050_alarm =
+ mib_p->fddiPORTLer_Alarm ;
+ sp->p4050_estimate =
+ mib_p->fddiPORTLer_Estimate ;
+ sp->p4050_reject_ct =
+ mib_p->fddiPORTLem_Reject_Ct ;
+ sp->p4050_ct =
+ mib_p->fddiPORTLem_Ct ;
+ sp_len = sizeof(struct smt_p_4050) ;
+ goto sp_done ;
+ }
+
+ case SMT_P4051 :
+ {
+ struct smt_p_4051 *sp ;
+ sp = (struct smt_p_4051 *) to ;
+ sp->p4051_multiple =
+ mib_p->fddiPORTMultiple_U ;
+ sp->p4051_porttype =
+ mib_p->fddiPORTMy_Type ;
+ sp->p4051_connectstate =
+ mib_p->fddiPORTConnectState ;
+ sp->p4051_pc_neighbor =
+ mib_p->fddiPORTNeighborType ;
+ sp->p4051_pc_withhold =
+ mib_p->fddiPORTPC_Withhold ;
+ sp_len = sizeof(struct smt_p_4051) ;
+ goto sp_done ;
+ }
+ case SMT_P4052 :
+ {
+ struct smt_p_4052 *sp ;
+ sp = (struct smt_p_4052 *) to ;
+ sp->p4052_flag =
+ mib_p->fddiPORTEB_Condition ;
+ sp->p4052_eberrorcount =
+ mib_p->fddiPORTEBError_Ct ;
+ sp_len = sizeof(struct smt_p_4052) ;
+ goto sp_done ;
+ }
+ case SMT_P4053 :
+ {
+ struct smt_p_4053 *sp ;
+ sp = (struct smt_p_4053 *) to ;
+ sp->p4053_multiple =
+ mib_p->fddiPORTMultiple_P ;
+ sp->p4053_availablepaths =
+ mib_p->fddiPORTAvailablePaths ;
+ sp->p4053_currentpath =
+ mib_p->fddiPORTCurrentPath ;
+ memcpy( (char *) &sp->p4053_requestedpaths,
+ (char *) mib_p->fddiPORTRequestedPaths,4) ;
+ sp->p4053_mytype =
+ mib_p->fddiPORTMy_Type ;
+ sp->p4053_neighbortype =
+ mib_p->fddiPORTNeighborType ;
+ sp_len = sizeof(struct smt_p_4053) ;
+ goto sp_done ;
+ }
+ default :
+ break ;
+ }
+ /*
+ * in table ?
+ */
+ if (!pt) {
+ pcon->pc_err = (para & 0xff00) ? SMT_RDF_NOPARAM :
+ SMT_RDF_ILLEGAL ;
+ return ;
+ }
+ /*
+ * check access rights
+ */
+ switch (pt->p_access) {
+ case AC_G :
+ case AC_GR :
+ break ;
+ default :
+ pcon->pc_err = SMT_RDF_ILLEGAL ;
+ return ;
+ }
+ from = mib_addr + pt->p_offset ;
+ if (!swap)
+ swap = pt->p_swap ; /* pointer to swap string */
+
+ /*
+ * copy values
+ */
+ while ((c = *swap++)) {
+ switch(c) {
+ case 'b' :
+ case 'w' :
+ case 'l' :
+ break ;
+ case 'S' :
+ case 'E' :
+ case 'R' :
+ case 'r' :
+ if (len < 4)
+ goto len_error ;
+ to[0] = 0 ;
+ to[1] = 0 ;
+#ifdef LITTLE_ENDIAN
+ if (c == 'r') {
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+ }
+ else {
+ to[3] = *from++ ;
+ to[2] = *from++ ;
+ }
+#else
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+#endif
+ to += 4 ;
+ len -= 4 ;
+ break ;
+ case 'I' : /* for SET of port indexes */
+ if (len < 2)
+ goto len_error ;
+#ifdef LITTLE_ENDIAN
+ to[1] = *from++ ;
+ to[0] = *from++ ;
+#else
+ to[0] = *from++ ;
+ to[1] = *from++ ;
+#endif
+ to += 2 ;
+ len -= 2 ;
+ break ;
+ case 'F' :
+ case 'B' :
+ if (len < 4)
+ goto len_error ;
+ len -= 4 ;
+ to[0] = 0 ;
+ to[1] = 0 ;
+ to[2] = 0 ;
+ to[3] = *from++ ;
+ to += 4 ;
+ break ;
+ case 'C' :
+ case 'T' :
+ case 'L' :
+ if (len < 4)
+ goto len_error ;
+#ifdef LITTLE_ENDIAN
+ to[3] = *from++ ;
+ to[2] = *from++ ;
+ to[1] = *from++ ;
+ to[0] = *from++ ;
+#else
+ to[0] = *from++ ;
+ to[1] = *from++ ;
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+#endif
+ len -= 4 ;
+ to += 4 ;
+ break ;
+ case '2' : /* PortMacIndicated */
+ if (len < 4)
+ goto len_error ;
+ to[0] = 0 ;
+ to[1] = 0 ;
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+ len -= 4 ;
+ to += 4 ;
+ break ;
+ case '4' :
+ if (len < 4)
+ goto len_error ;
+ to[0] = *from++ ;
+ to[1] = *from++ ;
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+ len -= 4 ;
+ to += 4 ;
+ break ;
+ case 'A' :
+ if (len < 8)
+ goto len_error ;
+ to[0] = 0 ;
+ to[1] = 0 ;
+ memcpy((char *) to+2,(char *) from,6) ;
+ to += 8 ;
+ from += 8 ;
+ len -= 8 ;
+ break ;
+ case '8' :
+ if (len < 8)
+ goto len_error ;
+ memcpy((char *) to,(char *) from,8) ;
+ to += 8 ;
+ from += 8 ;
+ len -= 8 ;
+ break ;
+ case 'D' :
+ if (len < 32)
+ goto len_error ;
+ memcpy((char *) to,(char *) from,32) ;
+ to += 32 ;
+ from += 32 ;
+ len -= 32 ;
+ break ;
+ case 'P' : /* timestamp is NOT swapped */
+ if (len < 8)
+ goto len_error ;
+ to[0] = *from++ ;
+ to[1] = *from++ ;
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+ to[4] = *from++ ;
+ to[5] = *from++ ;
+ to[6] = *from++ ;
+ to[7] = *from++ ;
+ to += 8 ;
+ len -= 8 ;
+ break ;
+ default :
+ SMT_PANIC(smc,SMT_E0119, SMT_E0119_MSG) ;
+ break ;
+ }
+ }
+
+done:
+ /*
+ * make it even (in case of 'I' encoding)
+ * note: len is DECREMENTED
+ */
+ if (len & 3) {
+ to[0] = 0 ;
+ to[1] = 0 ;
+ to += 4 - (len & 3 ) ;
+ len = len & ~ 3 ;
+ }
+
+ /* set type and length */
+ pa->p_type = para ;
+ pa->p_len = plen - len - PARA_LEN ;
+ /* return values */
+ pcon->pc_p = (void *) to ;
+ pcon->pc_len = len ;
+ return ;
+
+sp_done:
+ len -= sp_len ;
+ to += sp_len ;
+ goto done ;
+
+len_error:
+ /* parameter does not fit in frame */
+ pcon->pc_err = SMT_RDF_TOOLONG ;
+ return ;
+
+wrong_error:
+ pcon->pc_err = SMT_RDF_LENGTH ;
+}
+
+/*
+ * set parameter
+ */
+static int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index,
+ int local, int set)
+{
+#define IFSET(x) if (set) (x)
+
+ const struct s_p_tab *pt ;
+ int len ;
+ char *from ;
+ char *to ;
+ const char *swap ;
+ char c ;
+ char *mib_addr ;
+ struct fddi_mib *mib ;
+ struct fddi_mib_m *mib_m = NULL;
+ struct fddi_mib_a *mib_a = NULL;
+ struct fddi_mib_p *mib_p = NULL;
+ int mac ;
+ int path ;
+ int port ;
+ SK_LOC_DECL(u_char,byte_val) ;
+ SK_LOC_DECL(u_short,word_val) ;
+ SK_LOC_DECL(u_long,long_val) ;
+
+ mac = index - INDEX_MAC ;
+ path = index - INDEX_PATH ;
+ port = index - INDEX_PORT ;
+ len = pa->p_len ;
+ from = (char *) (pa + 1 ) ;
+
+ mib = &smc->mib ;
+ switch (pa->p_type & 0xf000) {
+ case 0x1000 :
+ default :
+ mib_addr = (char *) mib ;
+ break ;
+ case 0x2000 :
+ if (mac < 0 || mac >= NUMMACS) {
+ return SMT_RDF_NOPARAM;
+ }
+ mib_m = &smc->mib.m[mac] ;
+ mib_addr = (char *) mib_m ;
+ from += 4 ; /* skip index */
+ len -= 4 ;
+ break ;
+ case 0x3000 :
+ if (path < 0 || path >= NUMPATHS) {
+ return SMT_RDF_NOPARAM;
+ }
+ mib_a = &smc->mib.a[path] ;
+ mib_addr = (char *) mib_a ;
+ from += 4 ; /* skip index */
+ len -= 4 ;
+ break ;
+ case 0x4000 :
+ if (port < 0 || port >= smt_mib_phys(smc)) {
+ return SMT_RDF_NOPARAM;
+ }
+ mib_p = &smc->mib.p[port_to_mib(smc,port)] ;
+ mib_addr = (char *) mib_p ;
+ from += 4 ; /* skip index */
+ len -= 4 ;
+ break ;
+ }
+ switch (pa->p_type) {
+ case SMT_P10F0 :
+ case SMT_P10F1 :
+#ifdef ESS
+ case SMT_P10F2 :
+ case SMT_P10F3 :
+ case SMT_P10F4 :
+ case SMT_P10F5 :
+ case SMT_P10F6 :
+ case SMT_P10F7 :
+#endif
+#ifdef SBA
+ case SMT_P10F8 :
+ case SMT_P10F9 :
+#endif
+ case SMT_P20F1 :
+ if (!local)
+ return SMT_RDF_NOPARAM;
+ break ;
+ }
+ pt = smt_get_ptab(pa->p_type) ;
+ if (!pt)
+ return (pa->p_type & 0xff00) ? SMT_RDF_NOPARAM :
+ SMT_RDF_ILLEGAL;
+ switch (pt->p_access) {
+ case AC_GR :
+ case AC_S :
+ break ;
+ default :
+ return SMT_RDF_ILLEGAL;
+ }
+ to = mib_addr + pt->p_offset ;
+ swap = pt->p_swap ; /* pointer to swap string */
+
+ while (swap && (c = *swap++)) {
+ switch(c) {
+ case 'b' :
+ to = (char *) &byte_val ;
+ break ;
+ case 'w' :
+ to = (char *) &word_val ;
+ break ;
+ case 'l' :
+ to = (char *) &long_val ;
+ break ;
+ case 'S' :
+ case 'E' :
+ case 'R' :
+ case 'r' :
+ if (len < 4) {
+ goto len_error ;
+ }
+ if (from[0] | from[1])
+ goto val_error ;
+#ifdef LITTLE_ENDIAN
+ if (c == 'r') {
+ to[0] = from[2] ;
+ to[1] = from[3] ;
+ }
+ else {
+ to[1] = from[2] ;
+ to[0] = from[3] ;
+ }
+#else
+ to[0] = from[2] ;
+ to[1] = from[3] ;
+#endif
+ from += 4 ;
+ to += 2 ;
+ len -= 4 ;
+ break ;
+ case 'F' :
+ case 'B' :
+ if (len < 4) {
+ goto len_error ;
+ }
+ if (from[0] | from[1] | from[2])
+ goto val_error ;
+ to[0] = from[3] ;
+ len -= 4 ;
+ from += 4 ;
+ to += 4 ;
+ break ;
+ case 'C' :
+ case 'T' :
+ case 'L' :
+ if (len < 4) {
+ goto len_error ;
+ }
+#ifdef LITTLE_ENDIAN
+ to[3] = *from++ ;
+ to[2] = *from++ ;
+ to[1] = *from++ ;
+ to[0] = *from++ ;
+#else
+ to[0] = *from++ ;
+ to[1] = *from++ ;
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+#endif
+ len -= 4 ;
+ to += 4 ;
+ break ;
+ case 'A' :
+ if (len < 8)
+ goto len_error ;
+ if (set)
+ memcpy(to,from+2,6) ;
+ to += 8 ;
+ from += 8 ;
+ len -= 8 ;
+ break ;
+ case '4' :
+ if (len < 4)
+ goto len_error ;
+ if (set)
+ memcpy(to,from,4) ;
+ to += 4 ;
+ from += 4 ;
+ len -= 4 ;
+ break ;
+ case '8' :
+ if (len < 8)
+ goto len_error ;
+ if (set)
+ memcpy(to,from,8) ;
+ to += 8 ;
+ from += 8 ;
+ len -= 8 ;
+ break ;
+ case 'D' :
+ if (len < 32)
+ goto len_error ;
+ if (set)
+ memcpy(to,from,32) ;
+ to += 32 ;
+ from += 32 ;
+ len -= 32 ;
+ break ;
+ case 'P' : /* timestamp is NOT swapped */
+ if (set) {
+ to[0] = *from++ ;
+ to[1] = *from++ ;
+ to[2] = *from++ ;
+ to[3] = *from++ ;
+ to[4] = *from++ ;
+ to[5] = *from++ ;
+ to[6] = *from++ ;
+ to[7] = *from++ ;
+ }
+ to += 8 ;
+ len -= 8 ;
+ break ;
+ default :
+ SMT_PANIC(smc,SMT_E0120, SMT_E0120_MSG) ;
+ return SMT_RDF_ILLEGAL;
+ }
+ }
+ /*
+ * actions and internal updates
+ */
+ switch (pa->p_type) {
+ case SMT_P101A: /* fddiSMTConfigPolicy */
+ if (word_val & ~1)
+ goto val_error ;
+ IFSET(mib->fddiSMTConfigPolicy = word_val) ;
+ break ;
+ case SMT_P101B : /* fddiSMTConnectionPolicy */
+ if (!(word_val & POLICY_MM))
+ goto val_error ;
+ IFSET(mib->fddiSMTConnectionPolicy = word_val) ;
+ break ;
+ case SMT_P101D : /* fddiSMTTT_Notify */
+ if (word_val < 2 || word_val > 30)
+ goto val_error ;
+ IFSET(mib->fddiSMTTT_Notify = word_val) ;
+ break ;
+ case SMT_P101E : /* fddiSMTStatRptPolicy */
+ if (byte_val & ~1)
+ goto val_error ;
+ IFSET(mib->fddiSMTStatRptPolicy = byte_val) ;
+ break ;
+ case SMT_P101F : /* fddiSMTTrace_MaxExpiration */
+ /*
+ * note: lower limit trace_max = 6.001773... s
+ * NO upper limit
+ */
+ if (long_val < (long)0x478bf51L)
+ goto val_error ;
+ IFSET(mib->fddiSMTTrace_MaxExpiration = long_val) ;
+ break ;
+#ifdef ESS
+ case SMT_P10F2 : /* fddiESSPayload */
+ if (long_val > 1562)
+ goto val_error ;
+ if (set && smc->mib.fddiESSPayload != long_val) {
+ smc->ess.raf_act_timer_poll = TRUE ;
+ smc->mib.fddiESSPayload = long_val ;
+ }
+ break ;
+ case SMT_P10F3 : /* fddiESSOverhead */
+ if (long_val < 50 || long_val > 5000)
+ goto val_error ;
+ if (set && smc->mib.fddiESSPayload &&
+ smc->mib.fddiESSOverhead != long_val) {
+ smc->ess.raf_act_timer_poll = TRUE ;
+ smc->mib.fddiESSOverhead = long_val ;
+ }
+ break ;
+ case SMT_P10F4 : /* fddiESSMaxTNeg */
+ if (long_val > -MS2BCLK(5) || long_val < -MS2BCLK(165))
+ goto val_error ;
+ IFSET(mib->fddiESSMaxTNeg = long_val) ;
+ break ;
+ case SMT_P10F5 : /* fddiESSMinSegmentSize */
+ if (long_val < 1 || long_val > 4478)
+ goto val_error ;
+ IFSET(mib->fddiESSMinSegmentSize = long_val) ;
+ break ;
+ case SMT_P10F6 : /* fddiESSCategory */
+ if ((long_val & 0xffff) != 1)
+ goto val_error ;
+ IFSET(mib->fddiESSCategory = long_val) ;
+ break ;
+ case SMT_P10F7 : /* fddiESSSyncTxMode */
+ if (word_val > 1)
+ goto val_error ;
+ IFSET(mib->fddiESSSynchTxMode = word_val) ;
+ break ;
+#endif
+#ifdef SBA
+ case SMT_P10F8 : /* fddiSBACommand */
+ if (byte_val != SB_STOP && byte_val != SB_START)
+ goto val_error ;
+ IFSET(mib->fddiSBACommand = byte_val) ;
+ break ;
+ case SMT_P10F9 : /* fddiSBAAvailable */
+ if (byte_val > 100)
+ goto val_error ;
+ IFSET(mib->fddiSBAAvailable = byte_val) ;
+ break ;
+#endif
+ case SMT_P2020 : /* fddiMACRequestedPaths */
+ if ((word_val & (MIB_P_PATH_PRIM_PREFER |
+ MIB_P_PATH_PRIM_ALTER)) == 0 )
+ goto val_error ;
+ IFSET(mib_m->fddiMACRequestedPaths = word_val) ;
+ break ;
+ case SMT_P205F : /* fddiMACFrameErrorThreshold */
+ /* 0 .. ffff acceptable */
+ IFSET(mib_m->fddiMACFrameErrorThreshold = word_val) ;
+ break ;
+ case SMT_P2067 : /* fddiMACNotCopiedThreshold */
+ /* 0 .. ffff acceptable */
+ IFSET(mib_m->fddiMACNotCopiedThreshold = word_val) ;
+ break ;
+ case SMT_P2076: /* fddiMACMA_UnitdataEnable */
+ if (byte_val & ~1)
+ goto val_error ;
+ if (set) {
+ mib_m->fddiMACMA_UnitdataEnable = byte_val ;
+ queue_event(smc,EVENT_RMT,RM_ENABLE_FLAG) ;
+ }
+ break ;
+ case SMT_P20F1 : /* fddiMACT_Min */
+ IFSET(mib_m->fddiMACT_Min = long_val) ;
+ break ;
+ case SMT_P320F :
+ if (long_val > 1562)
+ goto val_error ;
+ IFSET(mib_a->fddiPATHSbaPayload = long_val) ;
+#ifdef ESS
+ if (set)
+ ess_para_change(smc) ;
+#endif
+ break ;
+ case SMT_P3210 :
+ if (long_val > 5000)
+ goto val_error ;
+
+ if (long_val != 0 && mib_a->fddiPATHSbaPayload == 0)
+ goto val_error ;
+
+ IFSET(mib_a->fddiPATHSbaOverhead = long_val) ;
+#ifdef ESS
+ if (set)
+ ess_para_change(smc) ;
+#endif
+ break ;
+ case SMT_P3213: /* fddiPATHT_Rmode */
+ /* no limit :
+ * 0 .. 343.597 => 0 .. 2e32 * 80nS
+ */
+ if (set) {
+ mib_a->fddiPATHT_Rmode = long_val ;
+ rtm_set_timer(smc) ;
+ }
+ break ;
+ case SMT_P3214 : /* fddiPATHSbaAvailable */
+ if (long_val > 0x00BEBC20L)
+ goto val_error ;
+#ifdef SBA
+ if (set && mib->fddiSBACommand == SB_STOP)
+ goto val_error ;
+#endif
+ IFSET(mib_a->fddiPATHSbaAvailable = long_val) ;
+ break ;
+ case SMT_P3215 : /* fddiPATHTVXLowerBound */
+ IFSET(mib_a->fddiPATHTVXLowerBound = long_val) ;
+ goto change_mac_para ;
+ case SMT_P3216 : /* fddiPATHT_MaxLowerBound */
+ IFSET(mib_a->fddiPATHT_MaxLowerBound = long_val) ;
+ goto change_mac_para ;
+ case SMT_P3217 : /* fddiPATHMaxT_Req */
+ IFSET(mib_a->fddiPATHMaxT_Req = long_val) ;
+
+change_mac_para:
+ if (set && smt_set_mac_opvalues(smc)) {
+ RS_SET(smc,RS_EVENT) ;
+ smc->sm.please_reconnect = 1 ;
+ queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+ }
+ break ;
+ case SMT_P400E : /* fddiPORTConnectionPolicies */
+ if (byte_val > 1)
+ goto val_error ;
+ IFSET(mib_p->fddiPORTConnectionPolicies = byte_val) ;
+ break ;
+ case SMT_P4011 : /* fddiPORTRequestedPaths */
+ /* all 3*8 bits allowed */
+ IFSET(memcpy((char *)mib_p->fddiPORTRequestedPaths,
+ (char *)&long_val,4)) ;
+ break ;
+ case SMT_P401F: /* fddiPORTMaint_LS */
+ if (word_val > 4)
+ goto val_error ;
+ IFSET(mib_p->fddiPORTMaint_LS = word_val) ;
+ break ;
+ case SMT_P403A : /* fddiPORTLer_Cutoff */
+ if (byte_val < 4 || byte_val > 15)
+ goto val_error ;
+ IFSET(mib_p->fddiPORTLer_Cutoff = byte_val) ;
+ break ;
+ case SMT_P403B : /* fddiPORTLer_Alarm */
+ if (byte_val < 4 || byte_val > 15)
+ goto val_error ;
+ IFSET(mib_p->fddiPORTLer_Alarm = byte_val) ;
+ break ;
+
+ /*
+ * Actions
+ */
+ case SMT_P103C : /* fddiSMTStationAction */
+ if (smt_action(smc,SMT_STATION_ACTION, (int) word_val, 0))
+ goto val_error ;
+ break ;
+ case SMT_P4046: /* fddiPORTAction */
+ if (smt_action(smc,SMT_PORT_ACTION, (int) word_val,
+ port_to_mib(smc,port)))
+ goto val_error ;
+ break ;
+ default :
+ break ;
+ }
+ return 0;
+
+val_error:
+ /* parameter value in frame is out of range */
+ return SMT_RDF_RANGE;
+
+len_error:
+ /* parameter value in frame is too short */
+ return SMT_RDF_LENGTH;
+
+#if 0
+no_author_error:
+ /* parameter not setable, because the SBA is not active
+ * Please note: we give the return code 'not authorizeed
+ * because SBA denied is not a valid return code in the
+ * PMF protocol.
+ */
+ return SMT_RDF_AUTHOR;
+#endif
+}
+
+static const struct s_p_tab *smt_get_ptab(u_short para)
+{
+ const struct s_p_tab *pt ;
+ for (pt = p_tab ; pt->p_num && pt->p_num != para ; pt++)
+ ;
+ return pt->p_num ? pt : NULL;
+}
+
+static int smt_mib_phys(struct s_smc *smc)
+{
+#ifdef CONCENTRATOR
+ SK_UNUSED(smc) ;
+
+ return NUMPHYS;
+#else
+ if (smc->s.sas == SMT_SAS)
+ return 1;
+ return NUMPHYS;
+#endif
+}
+
+static int port_to_mib(struct s_smc *smc, int p)
+{
+#ifdef CONCENTRATOR
+ SK_UNUSED(smc) ;
+
+ return p;
+#else
+ if (smc->s.sas == SMT_SAS)
+ return PS;
+ return p;
+#endif
+}
+
+
+#ifdef DEBUG
+#ifndef BOOT
+void dump_smt(struct s_smc *smc, struct smt_header *sm, char *text)
+{
+ int len ;
+ struct smt_para *pa ;
+ char *c ;
+ int n ;
+ int nn ;
+#ifdef LITTLE_ENDIAN
+ int smtlen ;
+#endif
+
+ SK_UNUSED(smc) ;
+
+#ifdef DEBUG_BRD
+ if (smc->debug.d_smtf < 2)
+#else
+ if (debug.d_smtf < 2)
+#endif
+ return ;
+#ifdef LITTLE_ENDIAN
+ smtlen = sm->smt_len + sizeof(struct smt_header) ;
+#endif
+ printf("SMT Frame [%s]:\nDA ",text) ;
+ dump_hex((char *) &sm->smt_dest,6) ;
+ printf("\tSA ") ;
+ dump_hex((char *) &sm->smt_source,6) ;
+ printf(" Class %x Type %x Version %x\n",
+ sm->smt_class,sm->smt_type,sm->smt_version) ;
+ printf("TID %lx\t\tSID ",sm->smt_tid) ;
+ dump_hex((char *) &sm->smt_sid,8) ;
+ printf(" LEN %x\n",sm->smt_len) ;
+
+ len = sm->smt_len ;
+ pa = (struct smt_para *) (sm + 1) ;
+ while (len > 0 ) {
+ int plen ;
+#ifdef UNIX
+ printf("TYPE %x LEN %x VALUE\t",pa->p_type,pa->p_len) ;
+#else
+ printf("TYPE %04x LEN %2x VALUE\t",pa->p_type,pa->p_len) ;
+#endif
+ n = pa->p_len ;
+ if ( (n < 0 ) || (n > (int)(len - PARA_LEN))) {
+ n = len - PARA_LEN ;
+ printf(" BAD LENGTH\n") ;
+ break ;
+ }
+#ifdef LITTLE_ENDIAN
+ smt_swap_para(sm,smtlen,0) ;
+#endif
+ if (n < 24) {
+ dump_hex((char *)(pa+1),(int) n) ;
+ printf("\n") ;
+ }
+ else {
+ int first = 0 ;
+ c = (char *)(pa+1) ;
+ dump_hex(c,16) ;
+ printf("\n") ;
+ n -= 16 ;
+ c += 16 ;
+ while (n > 0) {
+ nn = (n > 16) ? 16 : n ;
+ if (n > 64) {
+ if (first == 0)
+ printf("\t\t\t...\n") ;
+ first = 1 ;
+ }
+ else {
+ printf("\t\t\t") ;
+ dump_hex(c,nn) ;
+ printf("\n") ;
+ }
+ n -= nn ;
+ c += 16 ;
+ }
+ }
+#ifdef LITTLE_ENDIAN
+ smt_swap_para(sm,smtlen,1) ;
+#endif
+ plen = (pa->p_len + PARA_LEN + 3) & ~3 ;
+ len -= plen ;
+ pa = (struct smt_para *)((char *)pa + plen) ;
+ }
+ printf("-------------------------------------------------\n\n") ;
+}
+
+void dump_hex(char *p, int len)
+{
+ int n = 0 ;
+ while (len--) {
+ n++ ;
+#ifdef UNIX
+ printf("%x%s",*p++ & 0xff,len ? ( (n & 7) ? " " : "-") : "") ;
+#else
+ printf("%02x%s",*p++ & 0xff,len ? ( (n & 7) ? " " : "-") : "") ;
+#endif
+ }
+}
+#endif /* no BOOT */
+#endif /* DEBUG */
+
+
+#endif /* no SLIM_SMT */
diff --git a/drivers/net/fddi/skfp/queue.c b/drivers/net/fddi/skfp/queue.c
new file mode 100644
index 000000000..c1a0df455
--- /dev/null
+++ b/drivers/net/fddi/skfp/queue.c
@@ -0,0 +1,173 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ SMT Event Queue Management
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)queue.c 2.9 97/08/04 (C) SK " ;
+#endif
+
+#define PRINTF(a,b,c)
+
+/*
+ * init event queue management
+ */
+void ev_init(struct s_smc *smc)
+{
+ smc->q.ev_put = smc->q.ev_get = smc->q.ev_queue ;
+}
+
+/*
+ * add event to queue
+ */
+void queue_event(struct s_smc *smc, int class, int event)
+{
+ PRINTF("queue class %d event %d\n",class,event) ;
+ smc->q.ev_put->class = class ;
+ smc->q.ev_put->event = event ;
+ if (++smc->q.ev_put == &smc->q.ev_queue[MAX_EVENT])
+ smc->q.ev_put = smc->q.ev_queue ;
+
+ if (smc->q.ev_put == smc->q.ev_get) {
+ SMT_ERR_LOG(smc,SMT_E0137, SMT_E0137_MSG) ;
+ }
+}
+
+/*
+ * timer_event is called from HW timer package.
+ */
+void timer_event(struct s_smc *smc, u_long token)
+{
+ PRINTF("timer event class %d token %d\n",
+ EV_T_CLASS(token),
+ EV_T_EVENT(token)) ;
+ queue_event(smc,EV_T_CLASS(token),EV_T_EVENT(token));
+}
+
+/*
+ * event dispatcher
+ * while event queue is not empty
+ * get event from queue
+ * send command to state machine
+ * end
+ */
+void ev_dispatcher(struct s_smc *smc)
+{
+ struct event_queue *ev ; /* pointer into queue */
+ int class ;
+
+ ev = smc->q.ev_get ;
+ PRINTF("dispatch get %x put %x\n",ev,smc->q.ev_put) ;
+ while (ev != smc->q.ev_put) {
+ PRINTF("dispatch class %d event %d\n",ev->class,ev->event) ;
+ switch(class = ev->class) {
+ case EVENT_ECM : /* Entity Corordination Man. */
+ ecm(smc,(int)ev->event) ;
+ break ;
+ case EVENT_CFM : /* Configuration Man. */
+ cfm(smc,(int)ev->event) ;
+ break ;
+ case EVENT_RMT : /* Ring Man. */
+ rmt(smc,(int)ev->event) ;
+ break ;
+ case EVENT_SMT :
+ smt_event(smc,(int)ev->event) ;
+ break ;
+#ifdef CONCENTRATOR
+ case 99 :
+ timer_test_event(smc,(int)ev->event) ;
+ break ;
+#endif
+ case EVENT_PCMA : /* PHY A */
+ case EVENT_PCMB : /* PHY B */
+ default :
+ if (class >= EVENT_PCMA &&
+ class < EVENT_PCMA + NUMPHYS) {
+ pcm(smc,class - EVENT_PCMA,(int)ev->event) ;
+ break ;
+ }
+ SMT_PANIC(smc,SMT_E0121, SMT_E0121_MSG) ;
+ return ;
+ }
+
+ if (++ev == &smc->q.ev_queue[MAX_EVENT])
+ ev = smc->q.ev_queue ;
+
+ /* Renew get: it is used in queue_events to detect overruns */
+ smc->q.ev_get = ev;
+ }
+}
+
+/*
+ * smt_online connects to or disconnects from the ring
+ * MUST be called to initiate connection establishment
+ *
+ * on 0 disconnect
+ * on 1 connect
+ */
+u_short smt_online(struct s_smc *smc, int on)
+{
+ queue_event(smc,EVENT_ECM,on ? EC_CONNECT : EC_DISCONNECT) ;
+ ev_dispatcher(smc) ;
+ return smc->mib.fddiSMTCF_State;
+}
+
+/*
+ * set SMT flag to value
+ * flag flag name
+ * value flag value
+ * dump current flag setting
+ */
+#ifdef CONCENTRATOR
+void do_smt_flag(struct s_smc *smc, char *flag, int value)
+{
+#ifdef DEBUG
+ struct smt_debug *deb;
+
+ SK_UNUSED(smc) ;
+
+#ifdef DEBUG_BRD
+ deb = &smc->debug;
+#else
+ deb = &debug;
+#endif
+ if (!strcmp(flag,"smt"))
+ deb->d_smt = value ;
+ else if (!strcmp(flag,"smtf"))
+ deb->d_smtf = value ;
+ else if (!strcmp(flag,"pcm"))
+ deb->d_pcm = value ;
+ else if (!strcmp(flag,"rmt"))
+ deb->d_rmt = value ;
+ else if (!strcmp(flag,"cfm"))
+ deb->d_cfm = value ;
+ else if (!strcmp(flag,"ecm"))
+ deb->d_ecm = value ;
+ printf("smt %d\n",deb->d_smt) ;
+ printf("smtf %d\n",deb->d_smtf) ;
+ printf("pcm %d\n",deb->d_pcm) ;
+ printf("rmt %d\n",deb->d_rmt) ;
+ printf("cfm %d\n",deb->d_cfm) ;
+ printf("ecm %d\n",deb->d_ecm) ;
+#endif /* DEBUG */
+}
+#endif
diff --git a/drivers/net/fddi/skfp/rmt.c b/drivers/net/fddi/skfp/rmt.c
new file mode 100644
index 000000000..ef8d5672d
--- /dev/null
+++ b/drivers/net/fddi/skfp/rmt.c
@@ -0,0 +1,654 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ SMT RMT
+ Ring Management
+*/
+
+/*
+ * Hardware independent state machine implemantation
+ * The following external SMT functions are referenced :
+ *
+ * queue_event()
+ * smt_timer_start()
+ * smt_timer_stop()
+ *
+ * The following external HW dependent functions are referenced :
+ * sm_ma_control()
+ * sm_mac_check_beacon_claim()
+ *
+ * The following HW dependent events are required :
+ * RM_RING_OP
+ * RM_RING_NON_OP
+ * RM_MY_BEACON
+ * RM_OTHER_BEACON
+ * RM_MY_CLAIM
+ * RM_TRT_EXP
+ * RM_VALID_CLAIM
+ *
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)rmt.c 2.13 99/07/02 (C) SK " ;
+#endif
+
+/*
+ * FSM Macros
+ */
+#define AFLAG 0x10
+#define GO_STATE(x) (smc->mib.m[MAC0].fddiMACRMTState = (x)|AFLAG)
+#define ACTIONS_DONE() (smc->mib.m[MAC0].fddiMACRMTState &= ~AFLAG)
+#define ACTIONS(x) (x|AFLAG)
+
+#define RM0_ISOLATED 0
+#define RM1_NON_OP 1 /* not operational */
+#define RM2_RING_OP 2 /* ring operational */
+#define RM3_DETECT 3 /* detect dupl addresses */
+#define RM4_NON_OP_DUP 4 /* dupl. addr detected */
+#define RM5_RING_OP_DUP 5 /* ring oper. with dupl. addr */
+#define RM6_DIRECTED 6 /* sending directed beacons */
+#define RM7_TRACE 7 /* trace initiated */
+
+#ifdef DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const rmt_states[] = {
+ "RM0_ISOLATED","RM1_NON_OP","RM2_RING_OP","RM3_DETECT",
+ "RM4_NON_OP_DUP","RM5_RING_OP_DUP","RM6_DIRECTED",
+ "RM7_TRACE"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const rmt_events[] = {
+ "NONE","RM_RING_OP","RM_RING_NON_OP","RM_MY_BEACON",
+ "RM_OTHER_BEACON","RM_MY_CLAIM","RM_TRT_EXP","RM_VALID_CLAIM",
+ "RM_JOIN","RM_LOOP","RM_DUP_ADDR","RM_ENABLE_FLAG",
+ "RM_TIMEOUT_NON_OP","RM_TIMEOUT_T_STUCK",
+ "RM_TIMEOUT_ANNOUNCE","RM_TIMEOUT_T_DIRECT",
+ "RM_TIMEOUT_D_MAX","RM_TIMEOUT_POLL","RM_TX_STATE_CHANGE"
+} ;
+#endif
+
+/*
+ * Globals
+ * in struct s_rmt
+ */
+
+
+/*
+ * function declarations
+ */
+static void rmt_fsm(struct s_smc *smc, int cmd);
+static void start_rmt_timer0(struct s_smc *smc, u_long value, int event);
+static void start_rmt_timer1(struct s_smc *smc, u_long value, int event);
+static void start_rmt_timer2(struct s_smc *smc, u_long value, int event);
+static void stop_rmt_timer0(struct s_smc *smc);
+static void stop_rmt_timer1(struct s_smc *smc);
+static void stop_rmt_timer2(struct s_smc *smc);
+static void rmt_dup_actions(struct s_smc *smc);
+static void rmt_reinsert_actions(struct s_smc *smc);
+static void rmt_leave_actions(struct s_smc *smc);
+static void rmt_new_dup_actions(struct s_smc *smc);
+
+#ifndef SUPERNET_3
+extern void restart_trt_for_dbcn() ;
+#endif /*SUPERNET_3*/
+
+/*
+ init RMT state machine
+ clear all RMT vars and flags
+*/
+void rmt_init(struct s_smc *smc)
+{
+ smc->mib.m[MAC0].fddiMACRMTState = ACTIONS(RM0_ISOLATED) ;
+ smc->r.dup_addr_test = DA_NONE ;
+ smc->r.da_flag = 0 ;
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+ smc->r.sm_ma_avail = FALSE ;
+ smc->r.loop_avail = 0 ;
+ smc->r.bn_flag = 0 ;
+ smc->r.jm_flag = 0 ;
+ smc->r.no_flag = TRUE ;
+}
+
+/*
+ RMT state machine
+ called by dispatcher
+
+ do
+ display state change
+ process event
+ until SM is stable
+*/
+void rmt(struct s_smc *smc, int event)
+{
+ int state ;
+
+ do {
+ DB_RMT("RMT : state %s%s",
+ (smc->mib.m[MAC0].fddiMACRMTState & AFLAG) ? "ACTIONS " : "",
+ rmt_states[smc->mib.m[MAC0].fddiMACRMTState & ~AFLAG]) ;
+ DB_RMT(" event %s\n",rmt_events[event],0) ;
+ state = smc->mib.m[MAC0].fddiMACRMTState ;
+ rmt_fsm(smc,event) ;
+ event = 0 ;
+ } while (state != smc->mib.m[MAC0].fddiMACRMTState) ;
+ rmt_state_change(smc,(int)smc->mib.m[MAC0].fddiMACRMTState) ;
+}
+
+/*
+ process RMT event
+*/
+static void rmt_fsm(struct s_smc *smc, int cmd)
+{
+ /*
+ * RM00-RM70 : from all states
+ */
+ if (!smc->r.rm_join && !smc->r.rm_loop &&
+ smc->mib.m[MAC0].fddiMACRMTState != ACTIONS(RM0_ISOLATED) &&
+ smc->mib.m[MAC0].fddiMACRMTState != RM0_ISOLATED) {
+ RS_SET(smc,RS_NORINGOP) ;
+ rmt_indication(smc,0) ;
+ GO_STATE(RM0_ISOLATED) ;
+ return ;
+ }
+
+ switch(smc->mib.m[MAC0].fddiMACRMTState) {
+ case ACTIONS(RM0_ISOLATED) :
+ stop_rmt_timer0(smc) ;
+ stop_rmt_timer1(smc) ;
+ stop_rmt_timer2(smc) ;
+
+ /*
+ * Disable MAC.
+ */
+ sm_ma_control(smc,MA_OFFLINE) ;
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+ smc->r.loop_avail = FALSE ;
+ smc->r.sm_ma_avail = FALSE ;
+ smc->r.no_flag = TRUE ;
+ DB_RMTN(1,"RMT : ISOLATED\n",0,0) ;
+ ACTIONS_DONE() ;
+ break ;
+ case RM0_ISOLATED :
+ /*RM01*/
+ if (smc->r.rm_join || smc->r.rm_loop) {
+ /*
+ * According to the standard the MAC must be reset
+ * here. The FORMAC will be initialized and Claim
+ * and Beacon Frames will be uploaded to the MAC.
+ * So any change of Treq will take effect NOW.
+ */
+ sm_ma_control(smc,MA_RESET) ;
+ GO_STATE(RM1_NON_OP) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(RM1_NON_OP) :
+ start_rmt_timer0(smc,smc->s.rmt_t_non_op,RM_TIMEOUT_NON_OP) ;
+ stop_rmt_timer1(smc) ;
+ stop_rmt_timer2(smc) ;
+ sm_ma_control(smc,MA_BEACON) ;
+ DB_RMTN(1,"RMT : RING DOWN\n",0,0) ;
+ RS_SET(smc,RS_NORINGOP) ;
+ smc->r.sm_ma_avail = FALSE ;
+ rmt_indication(smc,0) ;
+ ACTIONS_DONE() ;
+ break ;
+ case RM1_NON_OP :
+ /*RM12*/
+ if (cmd == RM_RING_OP) {
+ RS_SET(smc,RS_RINGOPCHANGE) ;
+ GO_STATE(RM2_RING_OP) ;
+ break ;
+ }
+ /*RM13*/
+ else if (cmd == RM_TIMEOUT_NON_OP) {
+ smc->r.bn_flag = FALSE ;
+ smc->r.no_flag = TRUE ;
+ GO_STATE(RM3_DETECT) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(RM2_RING_OP) :
+ stop_rmt_timer0(smc) ;
+ stop_rmt_timer1(smc) ;
+ stop_rmt_timer2(smc) ;
+ smc->r.no_flag = FALSE ;
+ if (smc->r.rm_loop)
+ smc->r.loop_avail = TRUE ;
+ if (smc->r.rm_join) {
+ smc->r.sm_ma_avail = TRUE ;
+ if (smc->mib.m[MAC0].fddiMACMA_UnitdataEnable)
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = TRUE ;
+ else
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+ }
+ DB_RMTN(1,"RMT : RING UP\n",0,0) ;
+ RS_CLEAR(smc,RS_NORINGOP) ;
+ RS_SET(smc,RS_RINGOPCHANGE) ;
+ rmt_indication(smc,1) ;
+ smt_stat_counter(smc,0) ;
+ ACTIONS_DONE() ;
+ break ;
+ case RM2_RING_OP :
+ /*RM21*/
+ if (cmd == RM_RING_NON_OP) {
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+ smc->r.loop_avail = FALSE ;
+ RS_SET(smc,RS_RINGOPCHANGE) ;
+ GO_STATE(RM1_NON_OP) ;
+ break ;
+ }
+ /*RM22a*/
+ else if (cmd == RM_ENABLE_FLAG) {
+ if (smc->mib.m[MAC0].fddiMACMA_UnitdataEnable)
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = TRUE ;
+ else
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+ }
+ /*RM25*/
+ else if (smc->r.dup_addr_test == DA_FAILED) {
+ smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+ smc->r.loop_avail = FALSE ;
+ smc->r.da_flag = TRUE ;
+ GO_STATE(RM5_RING_OP_DUP) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(RM3_DETECT) :
+ start_rmt_timer0(smc,smc->s.mac_d_max*2,RM_TIMEOUT_D_MAX) ;
+ start_rmt_timer1(smc,smc->s.rmt_t_stuck,RM_TIMEOUT_T_STUCK) ;
+ start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL) ;
+ sm_mac_check_beacon_claim(smc) ;
+ DB_RMTN(1,"RMT : RM3_DETECT\n",0,0) ;
+ ACTIONS_DONE() ;
+ break ;
+ case RM3_DETECT :
+ if (cmd == RM_TIMEOUT_POLL) {
+ start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL);
+ sm_mac_check_beacon_claim(smc) ;
+ break ;
+ }
+ if (cmd == RM_TIMEOUT_D_MAX) {
+ smc->r.timer0_exp = TRUE ;
+ }
+ /*
+ *jd(22-Feb-1999)
+ * We need a time ">= 2*mac_d_max" since we had finished
+ * Claim or Beacon state. So we will restart timer0 at
+ * every state change.
+ */
+ if (cmd == RM_TX_STATE_CHANGE) {
+ start_rmt_timer0(smc,
+ smc->s.mac_d_max*2,
+ RM_TIMEOUT_D_MAX) ;
+ }
+ /*RM32*/
+ if (cmd == RM_RING_OP) {
+ GO_STATE(RM2_RING_OP) ;
+ break ;
+ }
+ /*RM33a*/
+ else if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON)
+ && smc->r.bn_flag) {
+ smc->r.bn_flag = FALSE ;
+ }
+ /*RM33b*/
+ else if (cmd == RM_TRT_EXP && !smc->r.bn_flag) {
+ int tx ;
+ /*
+ * set bn_flag only if in state T4 or T5:
+ * only if we're the beaconer should we start the
+ * trace !
+ */
+ if ((tx = sm_mac_get_tx_state(smc)) == 4 || tx == 5) {
+ DB_RMTN(2,"RMT : DETECT && TRT_EXPIRED && T4/T5\n",0,0);
+ smc->r.bn_flag = TRUE ;
+ /*
+ * If one of the upstream stations beaconed
+ * and the link to the upstream neighbor is
+ * lost we need to restart the stuck timer to
+ * check the "stuck beacon" condition.
+ */
+ start_rmt_timer1(smc,smc->s.rmt_t_stuck,
+ RM_TIMEOUT_T_STUCK) ;
+ }
+ /*
+ * We do NOT need to clear smc->r.bn_flag in case of
+ * not being in state T4 or T5, because the flag
+ * must be cleared in order to get in this condition.
+ */
+
+ DB_RMTN(2,
+ "RMT : sm_mac_get_tx_state() = %d (bn_flag = %d)\n",
+ tx,smc->r.bn_flag) ;
+ }
+ /*RM34a*/
+ else if (cmd == RM_MY_CLAIM && smc->r.timer0_exp) {
+ rmt_new_dup_actions(smc) ;
+ GO_STATE(RM4_NON_OP_DUP) ;
+ break ;
+ }
+ /*RM34b*/
+ else if (cmd == RM_MY_BEACON && smc->r.timer0_exp) {
+ rmt_new_dup_actions(smc) ;
+ GO_STATE(RM4_NON_OP_DUP) ;
+ break ;
+ }
+ /*RM34c*/
+ else if (cmd == RM_VALID_CLAIM) {
+ rmt_new_dup_actions(smc) ;
+ GO_STATE(RM4_NON_OP_DUP) ;
+ break ;
+ }
+ /*RM36*/
+ else if (cmd == RM_TIMEOUT_T_STUCK &&
+ smc->r.rm_join && smc->r.bn_flag) {
+ GO_STATE(RM6_DIRECTED) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(RM4_NON_OP_DUP) :
+ start_rmt_timer0(smc,smc->s.rmt_t_announce,RM_TIMEOUT_ANNOUNCE);
+ start_rmt_timer1(smc,smc->s.rmt_t_stuck,RM_TIMEOUT_T_STUCK) ;
+ start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL) ;
+ sm_mac_check_beacon_claim(smc) ;
+ DB_RMTN(1,"RMT : RM4_NON_OP_DUP\n",0,0) ;
+ ACTIONS_DONE() ;
+ break ;
+ case RM4_NON_OP_DUP :
+ if (cmd == RM_TIMEOUT_POLL) {
+ start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL);
+ sm_mac_check_beacon_claim(smc) ;
+ break ;
+ }
+ /*RM41*/
+ if (!smc->r.da_flag) {
+ GO_STATE(RM1_NON_OP) ;
+ break ;
+ }
+ /*RM44a*/
+ else if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON) &&
+ smc->r.bn_flag) {
+ smc->r.bn_flag = FALSE ;
+ }
+ /*RM44b*/
+ else if (cmd == RM_TRT_EXP && !smc->r.bn_flag) {
+ int tx ;
+ /*
+ * set bn_flag only if in state T4 or T5:
+ * only if we're the beaconer should we start the
+ * trace !
+ */
+ if ((tx = sm_mac_get_tx_state(smc)) == 4 || tx == 5) {
+ DB_RMTN(2,"RMT : NOPDUP && TRT_EXPIRED && T4/T5\n",0,0);
+ smc->r.bn_flag = TRUE ;
+ /*
+ * If one of the upstream stations beaconed
+ * and the link to the upstream neighbor is
+ * lost we need to restart the stuck timer to
+ * check the "stuck beacon" condition.
+ */
+ start_rmt_timer1(smc,smc->s.rmt_t_stuck,
+ RM_TIMEOUT_T_STUCK) ;
+ }
+ /*
+ * We do NOT need to clear smc->r.bn_flag in case of
+ * not being in state T4 or T5, because the flag
+ * must be cleared in order to get in this condition.
+ */
+
+ DB_RMTN(2,
+ "RMT : sm_mac_get_tx_state() = %d (bn_flag = %d)\n",
+ tx,smc->r.bn_flag) ;
+ }
+ /*RM44c*/
+ else if (cmd == RM_TIMEOUT_ANNOUNCE && !smc->r.bn_flag) {
+ rmt_dup_actions(smc) ;
+ }
+ /*RM45*/
+ else if (cmd == RM_RING_OP) {
+ smc->r.no_flag = FALSE ;
+ GO_STATE(RM5_RING_OP_DUP) ;
+ break ;
+ }
+ /*RM46*/
+ else if (cmd == RM_TIMEOUT_T_STUCK &&
+ smc->r.rm_join && smc->r.bn_flag) {
+ GO_STATE(RM6_DIRECTED) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(RM5_RING_OP_DUP) :
+ stop_rmt_timer0(smc) ;
+ stop_rmt_timer1(smc) ;
+ stop_rmt_timer2(smc) ;
+ DB_RMTN(1,"RMT : RM5_RING_OP_DUP\n",0,0) ;
+ ACTIONS_DONE() ;
+ break;
+ case RM5_RING_OP_DUP :
+ /*RM52*/
+ if (smc->r.dup_addr_test == DA_PASSED) {
+ smc->r.da_flag = FALSE ;
+ GO_STATE(RM2_RING_OP) ;
+ break ;
+ }
+ /*RM54*/
+ else if (cmd == RM_RING_NON_OP) {
+ smc->r.jm_flag = FALSE ;
+ smc->r.bn_flag = FALSE ;
+ GO_STATE(RM4_NON_OP_DUP) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(RM6_DIRECTED) :
+ start_rmt_timer0(smc,smc->s.rmt_t_direct,RM_TIMEOUT_T_DIRECT) ;
+ stop_rmt_timer1(smc) ;
+ start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL) ;
+ sm_ma_control(smc,MA_DIRECTED) ;
+ RS_SET(smc,RS_BEACON) ;
+ DB_RMTN(1,"RMT : RM6_DIRECTED\n",0,0) ;
+ ACTIONS_DONE() ;
+ break ;
+ case RM6_DIRECTED :
+ /*RM63*/
+ if (cmd == RM_TIMEOUT_POLL) {
+ start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL);
+ sm_mac_check_beacon_claim(smc) ;
+#ifndef SUPERNET_3
+ /* Because of problems with the Supernet II chip set
+ * sending of Directed Beacon will stop after 165ms
+ * therefore restart_trt_for_dbcn(smc) will be called
+ * to prevent this.
+ */
+ restart_trt_for_dbcn(smc) ;
+#endif /*SUPERNET_3*/
+ break ;
+ }
+ if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON) &&
+ !smc->r.da_flag) {
+ smc->r.bn_flag = FALSE ;
+ GO_STATE(RM3_DETECT) ;
+ break ;
+ }
+ /*RM64*/
+ else if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON) &&
+ smc->r.da_flag) {
+ smc->r.bn_flag = FALSE ;
+ GO_STATE(RM4_NON_OP_DUP) ;
+ break ;
+ }
+ /*RM67*/
+ else if (cmd == RM_TIMEOUT_T_DIRECT) {
+ GO_STATE(RM7_TRACE) ;
+ break ;
+ }
+ break ;
+ case ACTIONS(RM7_TRACE) :
+ stop_rmt_timer0(smc) ;
+ stop_rmt_timer1(smc) ;
+ stop_rmt_timer2(smc) ;
+ smc->e.trace_prop |= ENTITY_BIT(ENTITY_MAC) ;
+ queue_event(smc,EVENT_ECM,EC_TRACE_PROP) ;
+ DB_RMTN(1,"RMT : RM7_TRACE\n",0,0) ;
+ ACTIONS_DONE() ;
+ break ;
+ case RM7_TRACE :
+ break ;
+ default:
+ SMT_PANIC(smc,SMT_E0122, SMT_E0122_MSG) ;
+ break;
+ }
+}
+
+/*
+ * (jd) RMT duplicate address actions
+ * leave the ring or reinsert just as configured
+ */
+static void rmt_dup_actions(struct s_smc *smc)
+{
+ if (smc->r.jm_flag) {
+ }
+ else {
+ if (smc->s.rmt_dup_mac_behavior) {
+ SMT_ERR_LOG(smc,SMT_E0138, SMT_E0138_MSG) ;
+ rmt_reinsert_actions(smc) ;
+ }
+ else {
+ SMT_ERR_LOG(smc,SMT_E0135, SMT_E0135_MSG) ;
+ rmt_leave_actions(smc) ;
+ }
+ }
+}
+
+/*
+ * Reconnect to the Ring
+ */
+static void rmt_reinsert_actions(struct s_smc *smc)
+{
+ queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+ queue_event(smc,EVENT_ECM,EC_CONNECT) ;
+}
+
+/*
+ * duplicate address detected
+ */
+static void rmt_new_dup_actions(struct s_smc *smc)
+{
+ smc->r.da_flag = TRUE ;
+ smc->r.bn_flag = FALSE ;
+ smc->r.jm_flag = FALSE ;
+ /*
+ * we have three options : change address, jam or leave
+ * we leave the ring as default
+ * Optionally it's possible to reinsert after leaving the Ring
+ * but this will not conform with SMT Spec.
+ */
+ if (smc->s.rmt_dup_mac_behavior) {
+ SMT_ERR_LOG(smc,SMT_E0138, SMT_E0138_MSG) ;
+ rmt_reinsert_actions(smc) ;
+ }
+ else {
+ SMT_ERR_LOG(smc,SMT_E0135, SMT_E0135_MSG) ;
+ rmt_leave_actions(smc) ;
+ }
+}
+
+
+/*
+ * leave the ring
+ */
+static void rmt_leave_actions(struct s_smc *smc)
+{
+ queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+ /*
+ * Note: Do NOT try again later. (with please reconnect)
+ * The station must be left from the ring!
+ */
+}
+
+/*
+ * SMT timer interface
+ * start RMT timer 0
+ */
+static void start_rmt_timer0(struct s_smc *smc, u_long value, int event)
+{
+ smc->r.timer0_exp = FALSE ; /* clear timer event flag */
+ smt_timer_start(smc,&smc->r.rmt_timer0,value,EV_TOKEN(EVENT_RMT,event));
+}
+
+/*
+ * SMT timer interface
+ * start RMT timer 1
+ */
+static void start_rmt_timer1(struct s_smc *smc, u_long value, int event)
+{
+ smc->r.timer1_exp = FALSE ; /* clear timer event flag */
+ smt_timer_start(smc,&smc->r.rmt_timer1,value,EV_TOKEN(EVENT_RMT,event));
+}
+
+/*
+ * SMT timer interface
+ * start RMT timer 2
+ */
+static void start_rmt_timer2(struct s_smc *smc, u_long value, int event)
+{
+ smc->r.timer2_exp = FALSE ; /* clear timer event flag */
+ smt_timer_start(smc,&smc->r.rmt_timer2,value,EV_TOKEN(EVENT_RMT,event));
+}
+
+/*
+ * SMT timer interface
+ * stop RMT timer 0
+ */
+static void stop_rmt_timer0(struct s_smc *smc)
+{
+ if (smc->r.rmt_timer0.tm_active)
+ smt_timer_stop(smc,&smc->r.rmt_timer0) ;
+}
+
+/*
+ * SMT timer interface
+ * stop RMT timer 1
+ */
+static void stop_rmt_timer1(struct s_smc *smc)
+{
+ if (smc->r.rmt_timer1.tm_active)
+ smt_timer_stop(smc,&smc->r.rmt_timer1) ;
+}
+
+/*
+ * SMT timer interface
+ * stop RMT timer 2
+ */
+static void stop_rmt_timer2(struct s_smc *smc)
+{
+ if (smc->r.rmt_timer2.tm_active)
+ smt_timer_stop(smc,&smc->r.rmt_timer2) ;
+}
+
diff --git a/drivers/net/fddi/skfp/skfddi.c b/drivers/net/fddi/skfp/skfddi.c
new file mode 100644
index 000000000..51acc6d86
--- /dev/null
+++ b/drivers/net/fddi/skfp/skfddi.c
@@ -0,0 +1,2248 @@
+/*
+ * File Name:
+ * skfddi.c
+ *
+ * Copyright Information:
+ * Copyright SysKonnect 1998,1999.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ * Abstract:
+ * A Linux device driver supporting the SysKonnect FDDI PCI controller
+ * familie.
+ *
+ * Maintainers:
+ * CG Christoph Goos (cgoos@syskonnect.de)
+ *
+ * Contributors:
+ * DM David S. Miller
+ *
+ * Address all question to:
+ * linux@syskonnect.de
+ *
+ * The technical manual for the adapters is available from SysKonnect's
+ * web pages: www.syskonnect.com
+ * Goto "Support" and search Knowledge Base for "manual".
+ *
+ * Driver Architecture:
+ * The driver architecture is based on the DEC FDDI driver by
+ * Lawrence V. Stefani and several ethernet drivers.
+ * I also used an existing Windows NT miniport driver.
+ * All hardware dependent functions are handled by the SysKonnect
+ * Hardware Module.
+ * The only headerfiles that are directly related to this source
+ * are skfddi.c, h/types.h, h/osdef1st.h, h/targetos.h.
+ * The others belong to the SysKonnect FDDI Hardware Module and
+ * should better not be changed.
+ *
+ * Modification History:
+ * Date Name Description
+ * 02-Mar-98 CG Created.
+ *
+ * 10-Mar-99 CG Support for 2.2.x added.
+ * 25-Mar-99 CG Corrected IRQ routing for SMP (APIC)
+ * 26-Oct-99 CG Fixed compilation error on 2.2.13
+ * 12-Nov-99 CG Source code release
+ * 22-Nov-99 CG Included in kernel source.
+ * 07-May-00 DM 64 bit fixes, new dma interface
+ * 31-Jul-03 DB Audit copy_*_user in skfp_ioctl
+ * Daniele Bellucci <bellucda@tiscali.it>
+ * 03-Dec-03 SH Convert to PCI device model
+ *
+ * Compilation options (-Dxxx):
+ * DRIVERDEBUG print lots of messages to log file
+ * DUMPPACKETS print received/transmitted packets to logfile
+ *
+ * Tested cpu architectures:
+ * - i386
+ * - sparc64
+ */
+
+/* Version information string - should be updated prior to */
+/* each new release!!! */
+#define VERSION "2.07"
+
+static const char * const boot_msg =
+ "SysKonnect FDDI PCI Adapter driver v" VERSION " for\n"
+ " SK-55xx/SK-58xx adapters (SK-NET FDDI-FP/UP/LP)";
+
+/* Include files */
+
+#include <linux/capability.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include "h/types.h"
+#undef ADDR // undo Linux definition
+#include "h/skfbi.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smtstate.h"
+
+
+// Define module-wide (static) routines
+static int skfp_driver_init(struct net_device *dev);
+static int skfp_open(struct net_device *dev);
+static int skfp_close(struct net_device *dev);
+static irqreturn_t skfp_interrupt(int irq, void *dev_id);
+static struct net_device_stats *skfp_ctl_get_stats(struct net_device *dev);
+static void skfp_ctl_set_multicast_list(struct net_device *dev);
+static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev);
+static int skfp_ctl_set_mac_address(struct net_device *dev, void *addr);
+static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static netdev_tx_t skfp_send_pkt(struct sk_buff *skb,
+ struct net_device *dev);
+static void send_queued_packets(struct s_smc *smc);
+static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr);
+static void ResetAdapter(struct s_smc *smc);
+
+
+// Functions needed by the hardware module
+void *mac_drv_get_space(struct s_smc *smc, u_int size);
+void *mac_drv_get_desc_mem(struct s_smc *smc, u_int size);
+unsigned long mac_drv_virt2phys(struct s_smc *smc, void *virt);
+unsigned long dma_master(struct s_smc *smc, void *virt, int len, int flag);
+void dma_complete(struct s_smc *smc, volatile union s_fp_descr *descr,
+ int flag);
+void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd);
+void llc_restart_tx(struct s_smc *smc);
+void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+ int frag_count, int len);
+void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+ int frag_count);
+void mac_drv_fill_rxd(struct s_smc *smc);
+void mac_drv_clear_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+ int frag_count);
+int mac_drv_rx_init(struct s_smc *smc, int len, int fc, char *look_ahead,
+ int la_len);
+void dump_data(unsigned char *Data, int length);
+
+// External functions from the hardware module
+extern u_int mac_drv_check_space(void);
+extern int mac_drv_init(struct s_smc *smc);
+extern void hwm_tx_frag(struct s_smc *smc, char far * virt, u_long phys,
+ int len, int frame_status);
+extern int hwm_tx_init(struct s_smc *smc, u_char fc, int frag_count,
+ int frame_len, int frame_status);
+extern void fddi_isr(struct s_smc *smc);
+extern void hwm_rx_frag(struct s_smc *smc, char far * virt, u_long phys,
+ int len, int frame_status);
+extern void mac_drv_rx_mode(struct s_smc *smc, int mode);
+extern void mac_drv_clear_rx_queue(struct s_smc *smc);
+extern void enable_tx_irq(struct s_smc *smc, u_short queue);
+
+static const struct pci_device_id skfddi_pci_tbl[] = {
+ { PCI_VENDOR_ID_SK, PCI_DEVICE_ID_SK_FP, PCI_ANY_ID, PCI_ANY_ID, },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, skfddi_pci_tbl);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
+
+// Define module-wide (static) variables
+
+static int num_boards; /* total number of adapters configured */
+
+static const struct net_device_ops skfp_netdev_ops = {
+ .ndo_open = skfp_open,
+ .ndo_stop = skfp_close,
+ .ndo_start_xmit = skfp_send_pkt,
+ .ndo_get_stats = skfp_ctl_get_stats,
+ .ndo_change_mtu = fddi_change_mtu,
+ .ndo_set_rx_mode = skfp_ctl_set_multicast_list,
+ .ndo_set_mac_address = skfp_ctl_set_mac_address,
+ .ndo_do_ioctl = skfp_ioctl,
+};
+
+/*
+ * =================
+ * = skfp_init_one =
+ * =================
+ *
+ * Overview:
+ * Probes for supported FDDI PCI controllers
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * pdev - pointer to PCI device information
+ *
+ * Functional Description:
+ * This is now called by PCI driver registration process
+ * for each board found.
+ *
+ * Return Codes:
+ * 0 - This device (fddi0, fddi1, etc) configured successfully
+ * -ENODEV - No devices present, or no SysKonnect FDDI PCI device
+ * present for this device name
+ *
+ *
+ * Side Effects:
+ * Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ * initialized and the board resources are read and stored in
+ * the device structure.
+ */
+static int skfp_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ struct s_smc *smc; /* board pointer */
+ void __iomem *mem;
+ int err;
+
+ pr_debug("entering skfp_init_one\n");
+
+ if (num_boards == 0)
+ printk("%s\n", boot_msg);
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ err = pci_request_regions(pdev, "skfddi");
+ if (err)
+ goto err_out1;
+
+ pci_set_master(pdev);
+
+#ifdef MEM_MAPPED_IO
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ printk(KERN_ERR "skfp: region is not an MMIO resource\n");
+ err = -EIO;
+ goto err_out2;
+ }
+
+ mem = ioremap(pci_resource_start(pdev, 0), 0x4000);
+#else
+ if (!(pci_resource_flags(pdev, 1) & IO_RESOURCE_IO)) {
+ printk(KERN_ERR "skfp: region is not PIO resource\n");
+ err = -EIO;
+ goto err_out2;
+ }
+
+ mem = ioport_map(pci_resource_start(pdev, 1), FP_IO_LEN);
+#endif
+ if (!mem) {
+ printk(KERN_ERR "skfp: Unable to map register, "
+ "FDDI adapter will be disabled.\n");
+ err = -EIO;
+ goto err_out2;
+ }
+
+ dev = alloc_fddidev(sizeof(struct s_smc));
+ if (!dev) {
+ printk(KERN_ERR "skfp: Unable to allocate fddi device, "
+ "FDDI adapter will be disabled.\n");
+ err = -ENOMEM;
+ goto err_out3;
+ }
+
+ dev->irq = pdev->irq;
+ dev->netdev_ops = &skfp_netdev_ops;
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ /* Initialize board structure with bus-specific info */
+ smc = netdev_priv(dev);
+ smc->os.dev = dev;
+ smc->os.bus_type = SK_BUS_TYPE_PCI;
+ smc->os.pdev = *pdev;
+ smc->os.QueueSkb = MAX_TX_QUEUE_LEN;
+ smc->os.MaxFrameSize = MAX_FRAME_SIZE;
+ smc->os.dev = dev;
+ smc->hw.slot = -1;
+ smc->hw.iop = mem;
+ smc->os.ResetRequested = FALSE;
+ skb_queue_head_init(&smc->os.SendSkbQueue);
+
+ dev->base_addr = (unsigned long)mem;
+
+ err = skfp_driver_init(dev);
+ if (err)
+ goto err_out4;
+
+ err = register_netdev(dev);
+ if (err)
+ goto err_out5;
+
+ ++num_boards;
+ pci_set_drvdata(pdev, dev);
+
+ if ((pdev->subsystem_device & 0xff00) == 0x5500 ||
+ (pdev->subsystem_device & 0xff00) == 0x5800)
+ printk("%s: SysKonnect FDDI PCI adapter"
+ " found (SK-%04X)\n", dev->name,
+ pdev->subsystem_device);
+ else
+ printk("%s: FDDI PCI adapter found\n", dev->name);
+
+ return 0;
+err_out5:
+ if (smc->os.SharedMemAddr)
+ pci_free_consistent(pdev, smc->os.SharedMemSize,
+ smc->os.SharedMemAddr,
+ smc->os.SharedMemDMA);
+ pci_free_consistent(pdev, MAX_FRAME_SIZE,
+ smc->os.LocalRxBuffer, smc->os.LocalRxBufferDMA);
+err_out4:
+ free_netdev(dev);
+err_out3:
+#ifdef MEM_MAPPED_IO
+ iounmap(mem);
+#else
+ ioport_unmap(mem);
+#endif
+err_out2:
+ pci_release_regions(pdev);
+err_out1:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/*
+ * Called for each adapter board from pci_unregister_driver
+ */
+static void skfp_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *p = pci_get_drvdata(pdev);
+ struct s_smc *lp = netdev_priv(p);
+
+ unregister_netdev(p);
+
+ if (lp->os.SharedMemAddr) {
+ pci_free_consistent(&lp->os.pdev,
+ lp->os.SharedMemSize,
+ lp->os.SharedMemAddr,
+ lp->os.SharedMemDMA);
+ lp->os.SharedMemAddr = NULL;
+ }
+ if (lp->os.LocalRxBuffer) {
+ pci_free_consistent(&lp->os.pdev,
+ MAX_FRAME_SIZE,
+ lp->os.LocalRxBuffer,
+ lp->os.LocalRxBufferDMA);
+ lp->os.LocalRxBuffer = NULL;
+ }
+#ifdef MEM_MAPPED_IO
+ iounmap(lp->hw.iop);
+#else
+ ioport_unmap(lp->hw.iop);
+#endif
+ pci_release_regions(pdev);
+ free_netdev(p);
+
+ pci_disable_device(pdev);
+}
+
+/*
+ * ====================
+ * = skfp_driver_init =
+ * ====================
+ *
+ * Overview:
+ * Initializes remaining adapter board structure information
+ * and makes sure adapter is in a safe state prior to skfp_open().
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * This function allocates additional resources such as the host memory
+ * blocks needed by the adapter.
+ * The adapter is also reset. The OS must call skfp_open() to open
+ * the adapter and bring it on-line.
+ *
+ * Return Codes:
+ * 0 - initialization succeeded
+ * -1 - initialization failed
+ */
+static int skfp_driver_init(struct net_device *dev)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ skfddi_priv *bp = &smc->os;
+ int err = -EIO;
+
+ pr_debug("entering skfp_driver_init\n");
+
+ // set the io address in private structures
+ bp->base_addr = dev->base_addr;
+
+ // Get the interrupt level from the PCI Configuration Table
+ smc->hw.irq = dev->irq;
+
+ spin_lock_init(&bp->DriverLock);
+
+ // Allocate invalid frame
+ bp->LocalRxBuffer = pci_alloc_consistent(&bp->pdev, MAX_FRAME_SIZE, &bp->LocalRxBufferDMA);
+ if (!bp->LocalRxBuffer) {
+ printk("could not allocate mem for ");
+ printk("LocalRxBuffer: %d byte\n", MAX_FRAME_SIZE);
+ goto fail;
+ }
+
+ // Determine the required size of the 'shared' memory area.
+ bp->SharedMemSize = mac_drv_check_space();
+ pr_debug("Memory for HWM: %ld\n", bp->SharedMemSize);
+ if (bp->SharedMemSize > 0) {
+ bp->SharedMemSize += 16; // for descriptor alignment
+
+ bp->SharedMemAddr = pci_alloc_consistent(&bp->pdev,
+ bp->SharedMemSize,
+ &bp->SharedMemDMA);
+ if (!bp->SharedMemAddr) {
+ printk("could not allocate mem for ");
+ printk("hardware module: %ld byte\n",
+ bp->SharedMemSize);
+ goto fail;
+ }
+ bp->SharedMemHeap = 0; // Nothing used yet.
+
+ } else {
+ bp->SharedMemAddr = NULL;
+ bp->SharedMemHeap = 0;
+ } // SharedMemSize > 0
+
+ memset(bp->SharedMemAddr, 0, bp->SharedMemSize);
+
+ card_stop(smc); // Reset adapter.
+
+ pr_debug("mac_drv_init()..\n");
+ if (mac_drv_init(smc) != 0) {
+ pr_debug("mac_drv_init() failed\n");
+ goto fail;
+ }
+ read_address(smc, NULL);
+ pr_debug("HW-Addr: %pMF\n", smc->hw.fddi_canon_addr.a);
+ memcpy(dev->dev_addr, smc->hw.fddi_canon_addr.a, ETH_ALEN);
+
+ smt_reset_defaults(smc, 0);
+
+ return 0;
+
+fail:
+ if (bp->SharedMemAddr) {
+ pci_free_consistent(&bp->pdev,
+ bp->SharedMemSize,
+ bp->SharedMemAddr,
+ bp->SharedMemDMA);
+ bp->SharedMemAddr = NULL;
+ }
+ if (bp->LocalRxBuffer) {
+ pci_free_consistent(&bp->pdev, MAX_FRAME_SIZE,
+ bp->LocalRxBuffer, bp->LocalRxBufferDMA);
+ bp->LocalRxBuffer = NULL;
+ }
+ return err;
+} // skfp_driver_init
+
+
+/*
+ * =============
+ * = skfp_open =
+ * =============
+ *
+ * Overview:
+ * Opens the adapter
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * This function brings the adapter to an operational state.
+ *
+ * Return Codes:
+ * 0 - Adapter was successfully opened
+ * -EAGAIN - Could not register IRQ
+ */
+static int skfp_open(struct net_device *dev)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ int err;
+
+ pr_debug("entering skfp_open\n");
+ /* Register IRQ - support shared interrupts by passing device ptr */
+ err = request_irq(dev->irq, skfp_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (err)
+ return err;
+
+ /*
+ * Set current address to factory MAC address
+ *
+ * Note: We've already done this step in skfp_driver_init.
+ * However, it's possible that a user has set a node
+ * address override, then closed and reopened the
+ * adapter. Unless we reset the device address field
+ * now, we'll continue to use the existing modified
+ * address.
+ */
+ read_address(smc, NULL);
+ memcpy(dev->dev_addr, smc->hw.fddi_canon_addr.a, ETH_ALEN);
+
+ init_smt(smc, NULL);
+ smt_online(smc, 1);
+ STI_FBI();
+
+ /* Clear local multicast address tables */
+ mac_clear_multicast(smc);
+
+ /* Disable promiscuous filter settings */
+ mac_drv_rx_mode(smc, RX_DISABLE_PROMISC);
+
+ netif_start_queue(dev);
+ return 0;
+} // skfp_open
+
+
+/*
+ * ==============
+ * = skfp_close =
+ * ==============
+ *
+ * Overview:
+ * Closes the device/module.
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * This routine closes the adapter and brings it to a safe state.
+ * The interrupt service routine is deregistered with the OS.
+ * The adapter can be opened again with another call to skfp_open().
+ *
+ * Return Codes:
+ * Always return 0.
+ *
+ * Assumptions:
+ * No further requests for this adapter are made after this routine is
+ * called. skfp_open() can be called to reset and reinitialize the
+ * adapter.
+ */
+static int skfp_close(struct net_device *dev)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ skfddi_priv *bp = &smc->os;
+
+ CLI_FBI();
+ smt_reset_defaults(smc, 1);
+ card_stop(smc);
+ mac_drv_clear_tx_queue(smc);
+ mac_drv_clear_rx_queue(smc);
+
+ netif_stop_queue(dev);
+ /* Deregister (free) IRQ */
+ free_irq(dev->irq, dev);
+
+ skb_queue_purge(&bp->SendSkbQueue);
+ bp->QueueSkb = MAX_TX_QUEUE_LEN;
+
+ return 0;
+} // skfp_close
+
+
+/*
+ * ==================
+ * = skfp_interrupt =
+ * ==================
+ *
+ * Overview:
+ * Interrupt processing routine
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * irq - interrupt vector
+ * dev_id - pointer to device information
+ *
+ * Functional Description:
+ * This routine calls the interrupt processing routine for this adapter. It
+ * disables and reenables adapter interrupts, as appropriate. We can support
+ * shared interrupts since the incoming dev_id pointer provides our device
+ * structure context. All the real work is done in the hardware module.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * The interrupt acknowledgement at the hardware level (eg. ACKing the PIC
+ * on Intel-based systems) is done by the operating system outside this
+ * routine.
+ *
+ * System interrupts are enabled through this call.
+ *
+ * Side Effects:
+ * Interrupts are disabled, then reenabled at the adapter.
+ */
+
+static irqreturn_t skfp_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct s_smc *smc; /* private board structure pointer */
+ skfddi_priv *bp;
+
+ smc = netdev_priv(dev);
+ bp = &smc->os;
+
+ // IRQs enabled or disabled ?
+ if (inpd(ADDR(B0_IMSK)) == 0) {
+ // IRQs are disabled: must be shared interrupt
+ return IRQ_NONE;
+ }
+ // Note: At this point, IRQs are enabled.
+ if ((inpd(ISR_A) & smc->hw.is_imask) == 0) { // IRQ?
+ // Adapter did not issue an IRQ: must be shared interrupt
+ return IRQ_NONE;
+ }
+ CLI_FBI(); // Disable IRQs from our adapter.
+ spin_lock(&bp->DriverLock);
+
+ // Call interrupt handler in hardware module (HWM).
+ fddi_isr(smc);
+
+ if (smc->os.ResetRequested) {
+ ResetAdapter(smc);
+ smc->os.ResetRequested = FALSE;
+ }
+ spin_unlock(&bp->DriverLock);
+ STI_FBI(); // Enable IRQs from our adapter.
+
+ return IRQ_HANDLED;
+} // skfp_interrupt
+
+
+/*
+ * ======================
+ * = skfp_ctl_get_stats =
+ * ======================
+ *
+ * Overview:
+ * Get statistics for FDDI adapter
+ *
+ * Returns:
+ * Pointer to FDDI statistics structure
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * Gets current MIB objects from adapter, then
+ * returns FDDI statistics structure as defined
+ * in if_fddi.h.
+ *
+ * Note: Since the FDDI statistics structure is
+ * still new and the device structure doesn't
+ * have an FDDI-specific get statistics handler,
+ * we'll return the FDDI statistics structure as
+ * a pointer to an Ethernet statistics structure.
+ * That way, at least the first part of the statistics
+ * structure can be decoded properly.
+ * We'll have to pay attention to this routine as the
+ * device structure becomes more mature and LAN media
+ * independent.
+ *
+ */
+static struct net_device_stats *skfp_ctl_get_stats(struct net_device *dev)
+{
+ struct s_smc *bp = netdev_priv(dev);
+
+ /* Fill the bp->stats structure with driver-maintained counters */
+
+ bp->os.MacStat.port_bs_flag[0] = 0x1234;
+ bp->os.MacStat.port_bs_flag[1] = 0x5678;
+// goos: need to fill out fddi statistic
+#if 0
+ /* Get FDDI SMT MIB objects */
+
+/* Fill the bp->stats structure with the SMT MIB object values */
+
+ memcpy(bp->stats.smt_station_id, &bp->cmd_rsp_virt->smt_mib_get.smt_station_id, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_station_id));
+ bp->stats.smt_op_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_op_version_id;
+ bp->stats.smt_hi_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_hi_version_id;
+ bp->stats.smt_lo_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_lo_version_id;
+ memcpy(bp->stats.smt_user_data, &bp->cmd_rsp_virt->smt_mib_get.smt_user_data, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_user_data));
+ bp->stats.smt_mib_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_mib_version_id;
+ bp->stats.smt_mac_cts = bp->cmd_rsp_virt->smt_mib_get.smt_mac_ct;
+ bp->stats.smt_non_master_cts = bp->cmd_rsp_virt->smt_mib_get.smt_non_master_ct;
+ bp->stats.smt_master_cts = bp->cmd_rsp_virt->smt_mib_get.smt_master_ct;
+ bp->stats.smt_available_paths = bp->cmd_rsp_virt->smt_mib_get.smt_available_paths;
+ bp->stats.smt_config_capabilities = bp->cmd_rsp_virt->smt_mib_get.smt_config_capabilities;
+ bp->stats.smt_config_policy = bp->cmd_rsp_virt->smt_mib_get.smt_config_policy;
+ bp->stats.smt_connection_policy = bp->cmd_rsp_virt->smt_mib_get.smt_connection_policy;
+ bp->stats.smt_t_notify = bp->cmd_rsp_virt->smt_mib_get.smt_t_notify;
+ bp->stats.smt_stat_rpt_policy = bp->cmd_rsp_virt->smt_mib_get.smt_stat_rpt_policy;
+ bp->stats.smt_trace_max_expiration = bp->cmd_rsp_virt->smt_mib_get.smt_trace_max_expiration;
+ bp->stats.smt_bypass_present = bp->cmd_rsp_virt->smt_mib_get.smt_bypass_present;
+ bp->stats.smt_ecm_state = bp->cmd_rsp_virt->smt_mib_get.smt_ecm_state;
+ bp->stats.smt_cf_state = bp->cmd_rsp_virt->smt_mib_get.smt_cf_state;
+ bp->stats.smt_remote_disconnect_flag = bp->cmd_rsp_virt->smt_mib_get.smt_remote_disconnect_flag;
+ bp->stats.smt_station_status = bp->cmd_rsp_virt->smt_mib_get.smt_station_status;
+ bp->stats.smt_peer_wrap_flag = bp->cmd_rsp_virt->smt_mib_get.smt_peer_wrap_flag;
+ bp->stats.smt_time_stamp = bp->cmd_rsp_virt->smt_mib_get.smt_msg_time_stamp.ls;
+ bp->stats.smt_transition_time_stamp = bp->cmd_rsp_virt->smt_mib_get.smt_transition_time_stamp.ls;
+ bp->stats.mac_frame_status_functions = bp->cmd_rsp_virt->smt_mib_get.mac_frame_status_functions;
+ bp->stats.mac_t_max_capability = bp->cmd_rsp_virt->smt_mib_get.mac_t_max_capability;
+ bp->stats.mac_tvx_capability = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_capability;
+ bp->stats.mac_available_paths = bp->cmd_rsp_virt->smt_mib_get.mac_available_paths;
+ bp->stats.mac_current_path = bp->cmd_rsp_virt->smt_mib_get.mac_current_path;
+ memcpy(bp->stats.mac_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_upstream_nbr, FDDI_K_ALEN);
+ memcpy(bp->stats.mac_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_downstream_nbr, FDDI_K_ALEN);
+ memcpy(bp->stats.mac_old_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_upstream_nbr, FDDI_K_ALEN);
+ memcpy(bp->stats.mac_old_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_downstream_nbr, FDDI_K_ALEN);
+ bp->stats.mac_dup_address_test = bp->cmd_rsp_virt->smt_mib_get.mac_dup_address_test;
+ bp->stats.mac_requested_paths = bp->cmd_rsp_virt->smt_mib_get.mac_requested_paths;
+ bp->stats.mac_downstream_port_type = bp->cmd_rsp_virt->smt_mib_get.mac_downstream_port_type;
+ memcpy(bp->stats.mac_smt_address, &bp->cmd_rsp_virt->smt_mib_get.mac_smt_address, FDDI_K_ALEN);
+ bp->stats.mac_t_req = bp->cmd_rsp_virt->smt_mib_get.mac_t_req;
+ bp->stats.mac_t_neg = bp->cmd_rsp_virt->smt_mib_get.mac_t_neg;
+ bp->stats.mac_t_max = bp->cmd_rsp_virt->smt_mib_get.mac_t_max;
+ bp->stats.mac_tvx_value = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_value;
+ bp->stats.mac_frame_error_threshold = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_threshold;
+ bp->stats.mac_frame_error_ratio = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_ratio;
+ bp->stats.mac_rmt_state = bp->cmd_rsp_virt->smt_mib_get.mac_rmt_state;
+ bp->stats.mac_da_flag = bp->cmd_rsp_virt->smt_mib_get.mac_da_flag;
+ bp->stats.mac_una_da_flag = bp->cmd_rsp_virt->smt_mib_get.mac_unda_flag;
+ bp->stats.mac_frame_error_flag = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_flag;
+ bp->stats.mac_ma_unitdata_available = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_available;
+ bp->stats.mac_hardware_present = bp->cmd_rsp_virt->smt_mib_get.mac_hardware_present;
+ bp->stats.mac_ma_unitdata_enable = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_enable;
+ bp->stats.path_tvx_lower_bound = bp->cmd_rsp_virt->smt_mib_get.path_tvx_lower_bound;
+ bp->stats.path_t_max_lower_bound = bp->cmd_rsp_virt->smt_mib_get.path_t_max_lower_bound;
+ bp->stats.path_max_t_req = bp->cmd_rsp_virt->smt_mib_get.path_max_t_req;
+ memcpy(bp->stats.path_configuration, &bp->cmd_rsp_virt->smt_mib_get.path_configuration, sizeof(bp->cmd_rsp_virt->smt_mib_get.path_configuration));
+ bp->stats.port_my_type[0] = bp->cmd_rsp_virt->smt_mib_get.port_my_type[0];
+ bp->stats.port_my_type[1] = bp->cmd_rsp_virt->smt_mib_get.port_my_type[1];
+ bp->stats.port_neighbor_type[0] = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[0];
+ bp->stats.port_neighbor_type[1] = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[1];
+ bp->stats.port_connection_policies[0] = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[0];
+ bp->stats.port_connection_policies[1] = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[1];
+ bp->stats.port_mac_indicated[0] = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[0];
+ bp->stats.port_mac_indicated[1] = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[1];
+ bp->stats.port_current_path[0] = bp->cmd_rsp_virt->smt_mib_get.port_current_path[0];
+ bp->stats.port_current_path[1] = bp->cmd_rsp_virt->smt_mib_get.port_current_path[1];
+ memcpy(&bp->stats.port_requested_paths[0 * 3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[0], 3);
+ memcpy(&bp->stats.port_requested_paths[1 * 3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[1], 3);
+ bp->stats.port_mac_placement[0] = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[0];
+ bp->stats.port_mac_placement[1] = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[1];
+ bp->stats.port_available_paths[0] = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[0];
+ bp->stats.port_available_paths[1] = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[1];
+ bp->stats.port_pmd_class[0] = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[0];
+ bp->stats.port_pmd_class[1] = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[1];
+ bp->stats.port_connection_capabilities[0] = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[0];
+ bp->stats.port_connection_capabilities[1] = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[1];
+ bp->stats.port_bs_flag[0] = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[0];
+ bp->stats.port_bs_flag[1] = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[1];
+ bp->stats.port_ler_estimate[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[0];
+ bp->stats.port_ler_estimate[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[1];
+ bp->stats.port_ler_cutoff[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[0];
+ bp->stats.port_ler_cutoff[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[1];
+ bp->stats.port_ler_alarm[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[0];
+ bp->stats.port_ler_alarm[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[1];
+ bp->stats.port_connect_state[0] = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[0];
+ bp->stats.port_connect_state[1] = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[1];
+ bp->stats.port_pcm_state[0] = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[0];
+ bp->stats.port_pcm_state[1] = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[1];
+ bp->stats.port_pc_withhold[0] = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[0];
+ bp->stats.port_pc_withhold[1] = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[1];
+ bp->stats.port_ler_flag[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[0];
+ bp->stats.port_ler_flag[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[1];
+ bp->stats.port_hardware_present[0] = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[0];
+ bp->stats.port_hardware_present[1] = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[1];
+
+
+ /* Fill the bp->stats structure with the FDDI counter values */
+
+ bp->stats.mac_frame_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.frame_cnt.ls;
+ bp->stats.mac_copied_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.copied_cnt.ls;
+ bp->stats.mac_transmit_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.transmit_cnt.ls;
+ bp->stats.mac_error_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.error_cnt.ls;
+ bp->stats.mac_lost_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.lost_cnt.ls;
+ bp->stats.port_lct_fail_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[0].ls;
+ bp->stats.port_lct_fail_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[1].ls;
+ bp->stats.port_lem_reject_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[0].ls;
+ bp->stats.port_lem_reject_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[1].ls;
+ bp->stats.port_lem_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[0].ls;
+ bp->stats.port_lem_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[1].ls;
+
+#endif
+ return (struct net_device_stats *)&bp->os.MacStat;
+} // ctl_get_stat
+
+
+/*
+ * ==============================
+ * = skfp_ctl_set_multicast_list =
+ * ==============================
+ *
+ * Overview:
+ * Enable/Disable LLC frame promiscuous mode reception
+ * on the adapter and/or update multicast address table.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * This function acquires the driver lock and only calls
+ * skfp_ctl_set_multicast_list_wo_lock then.
+ * This routine follows a fairly simple algorithm for setting the
+ * adapter filters and CAM:
+ *
+ * if IFF_PROMISC flag is set
+ * enable promiscuous mode
+ * else
+ * disable promiscuous mode
+ * if number of multicast addresses <= max. multicast number
+ * add mc addresses to adapter table
+ * else
+ * enable promiscuous mode
+ * update adapter filters
+ *
+ * Assumptions:
+ * Multicast addresses are presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ * On-board adapter filters are updated.
+ */
+static void skfp_ctl_set_multicast_list(struct net_device *dev)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ skfddi_priv *bp = &smc->os;
+ unsigned long Flags;
+
+ spin_lock_irqsave(&bp->DriverLock, Flags);
+ skfp_ctl_set_multicast_list_wo_lock(dev);
+ spin_unlock_irqrestore(&bp->DriverLock, Flags);
+} // skfp_ctl_set_multicast_list
+
+
+
+static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ struct netdev_hw_addr *ha;
+
+ /* Enable promiscuous mode, if necessary */
+ if (dev->flags & IFF_PROMISC) {
+ mac_drv_rx_mode(smc, RX_ENABLE_PROMISC);
+ pr_debug("PROMISCUOUS MODE ENABLED\n");
+ }
+ /* Else, update multicast address table */
+ else {
+ mac_drv_rx_mode(smc, RX_DISABLE_PROMISC);
+ pr_debug("PROMISCUOUS MODE DISABLED\n");
+
+ // Reset all MC addresses
+ mac_clear_multicast(smc);
+ mac_drv_rx_mode(smc, RX_DISABLE_ALLMULTI);
+
+ if (dev->flags & IFF_ALLMULTI) {
+ mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
+ pr_debug("ENABLE ALL MC ADDRESSES\n");
+ } else if (!netdev_mc_empty(dev)) {
+ if (netdev_mc_count(dev) <= FPMAX_MULTICAST) {
+ /* use exact filtering */
+
+ // point to first multicast addr
+ netdev_for_each_mc_addr(ha, dev) {
+ mac_add_multicast(smc,
+ (struct fddi_addr *)ha->addr,
+ 1);
+
+ pr_debug("ENABLE MC ADDRESS: %pMF\n",
+ ha->addr);
+ }
+
+ } else { // more MC addresses than HW supports
+
+ mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
+ pr_debug("ENABLE ALL MC ADDRESSES\n");
+ }
+ } else { // no MC addresses
+
+ pr_debug("DISABLE ALL MC ADDRESSES\n");
+ }
+
+ /* Update adapter filters */
+ mac_update_multicast(smc);
+ }
+} // skfp_ctl_set_multicast_list_wo_lock
+
+
+/*
+ * ===========================
+ * = skfp_ctl_set_mac_address =
+ * ===========================
+ *
+ * Overview:
+ * set new mac address on adapter and update dev_addr field in device table.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * dev - pointer to device information
+ * addr - pointer to sockaddr structure containing unicast address to set
+ *
+ * Assumptions:
+ * The address pointed to by addr->sa_data is a valid unicast
+ * address and is presented in canonical (LSB) format.
+ */
+static int skfp_ctl_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ struct sockaddr *p_sockaddr = (struct sockaddr *) addr;
+ skfddi_priv *bp = &smc->os;
+ unsigned long Flags;
+
+
+ memcpy(dev->dev_addr, p_sockaddr->sa_data, FDDI_K_ALEN);
+ spin_lock_irqsave(&bp->DriverLock, Flags);
+ ResetAdapter(smc);
+ spin_unlock_irqrestore(&bp->DriverLock, Flags);
+
+ return 0; /* always return zero */
+} // skfp_ctl_set_mac_address
+
+
+/*
+ * ==============
+ * = skfp_ioctl =
+ * ==============
+ *
+ * Overview:
+ *
+ * Perform IOCTL call functions here. Some are privileged operations and the
+ * effective uid is checked in those cases.
+ *
+ * Returns:
+ * status value
+ * 0 - success
+ * other - failure
+ *
+ * Arguments:
+ * dev - pointer to device information
+ * rq - pointer to ioctl request structure
+ * cmd - ?
+ *
+ */
+
+
+static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ skfddi_priv *lp = &smc->os;
+ struct s_skfp_ioctl ioc;
+ int status = 0;
+
+ if (copy_from_user(&ioc, rq->ifr_data, sizeof(struct s_skfp_ioctl)))
+ return -EFAULT;
+
+ switch (ioc.cmd) {
+ case SKFP_GET_STATS: /* Get the driver statistics */
+ ioc.len = sizeof(lp->MacStat);
+ status = copy_to_user(ioc.data, skfp_ctl_get_stats(dev), ioc.len)
+ ? -EFAULT : 0;
+ break;
+ case SKFP_CLR_STATS: /* Zero out the driver statistics */
+ if (!capable(CAP_NET_ADMIN)) {
+ status = -EPERM;
+ } else {
+ memset(&lp->MacStat, 0, sizeof(lp->MacStat));
+ }
+ break;
+ default:
+ printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd);
+ status = -EOPNOTSUPP;
+
+ } // switch
+
+ return status;
+} // skfp_ioctl
+
+
+/*
+ * =====================
+ * = skfp_send_pkt =
+ * =====================
+ *
+ * Overview:
+ * Queues a packet for transmission and try to transmit it.
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * skb - pointer to sk_buff to queue for transmission
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * Here we assume that an incoming skb transmit request
+ * is contained in a single physically contiguous buffer
+ * in which the virtual address of the start of packet
+ * (skb->data) can be converted to a physical address
+ * by using pci_map_single().
+ *
+ * We have an internal queue for packets we can not send
+ * immediately. Packets in this queue can be given to the
+ * adapter if transmit buffers are freed.
+ *
+ * We can't free the skb until after it's been DMA'd
+ * out by the adapter, so we'll keep it in the driver and
+ * return it in mac_drv_tx_complete.
+ *
+ * Return Codes:
+ * 0 - driver has queued and/or sent packet
+ * 1 - caller should requeue the sk_buff for later transmission
+ *
+ * Assumptions:
+ * The entire packet is stored in one physically
+ * contiguous buffer which is not cached and whose
+ * 32-bit physical address can be determined.
+ *
+ * It's vital that this routine is NOT reentered for the
+ * same board and that the OS is not in another section of
+ * code (eg. skfp_interrupt) for the same board on a
+ * different thread.
+ *
+ * Side Effects:
+ * None
+ */
+static netdev_tx_t skfp_send_pkt(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct s_smc *smc = netdev_priv(dev);
+ skfddi_priv *bp = &smc->os;
+
+ pr_debug("skfp_send_pkt\n");
+
+ /*
+ * Verify that incoming transmit request is OK
+ *
+ * Note: The packet size check is consistent with other
+ * Linux device drivers, although the correct packet
+ * size should be verified before calling the
+ * transmit routine.
+ */
+
+ if (!(skb->len >= FDDI_K_LLC_ZLEN && skb->len <= FDDI_K_LLC_LEN)) {
+ bp->MacStat.gen.tx_errors++; /* bump error counter */
+ // dequeue packets from xmt queue and send them
+ netif_start_queue(dev);
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK; /* return "success" */
+ }
+ if (bp->QueueSkb == 0) { // return with tbusy set: queue full
+
+ netif_stop_queue(dev);
+ return NETDEV_TX_BUSY;
+ }
+ bp->QueueSkb--;
+ skb_queue_tail(&bp->SendSkbQueue, skb);
+ send_queued_packets(netdev_priv(dev));
+ if (bp->QueueSkb == 0) {
+ netif_stop_queue(dev);
+ }
+ return NETDEV_TX_OK;
+
+} // skfp_send_pkt
+
+
+/*
+ * =======================
+ * = send_queued_packets =
+ * =======================
+ *
+ * Overview:
+ * Send packets from the driver queue as long as there are some and
+ * transmit resources are available.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * smc - pointer to smc (adapter) structure
+ *
+ * Functional Description:
+ * Take a packet from queue if there is any. If not, then we are done.
+ * Check if there are resources to send the packet. If not, requeue it
+ * and exit.
+ * Set packet descriptor flags and give packet to adapter.
+ * Check if any send resources can be freed (we do not use the
+ * transmit complete interrupt).
+ */
+static void send_queued_packets(struct s_smc *smc)
+{
+ skfddi_priv *bp = &smc->os;
+ struct sk_buff *skb;
+ unsigned char fc;
+ int queue;
+ struct s_smt_fp_txd *txd; // Current TxD.
+ dma_addr_t dma_address;
+ unsigned long Flags;
+
+ int frame_status; // HWM tx frame status.
+
+ pr_debug("send queued packets\n");
+ for (;;) {
+ // send first buffer from queue
+ skb = skb_dequeue(&bp->SendSkbQueue);
+
+ if (!skb) {
+ pr_debug("queue empty\n");
+ return;
+ } // queue empty !
+
+ spin_lock_irqsave(&bp->DriverLock, Flags);
+ fc = skb->data[0];
+ queue = (fc & FC_SYNC_BIT) ? QUEUE_S : QUEUE_A0;
+#ifdef ESS
+ // Check if the frame may/must be sent as a synchronous frame.
+
+ if ((fc & ~(FC_SYNC_BIT | FC_LLC_PRIOR)) == FC_ASYNC_LLC) {
+ // It's an LLC frame.
+ if (!smc->ess.sync_bw_available)
+ fc &= ~FC_SYNC_BIT; // No bandwidth available.
+
+ else { // Bandwidth is available.
+
+ if (smc->mib.fddiESSSynchTxMode) {
+ // Send as sync. frame.
+ fc |= FC_SYNC_BIT;
+ }
+ }
+ }
+#endif // ESS
+ frame_status = hwm_tx_init(smc, fc, 1, skb->len, queue);
+
+ if ((frame_status & (LOC_TX | LAN_TX)) == 0) {
+ // Unable to send the frame.
+
+ if ((frame_status & RING_DOWN) != 0) {
+ // Ring is down.
+ pr_debug("Tx attempt while ring down.\n");
+ } else if ((frame_status & OUT_OF_TXD) != 0) {
+ pr_debug("%s: out of TXDs.\n", bp->dev->name);
+ } else {
+ pr_debug("%s: out of transmit resources",
+ bp->dev->name);
+ }
+
+ // Note: We will retry the operation as soon as
+ // transmit resources become available.
+ skb_queue_head(&bp->SendSkbQueue, skb);
+ spin_unlock_irqrestore(&bp->DriverLock, Flags);
+ return; // Packet has been queued.
+
+ } // if (unable to send frame)
+
+ bp->QueueSkb++; // one packet less in local queue
+
+ // source address in packet ?
+ CheckSourceAddress(skb->data, smc->hw.fddi_canon_addr.a);
+
+ txd = (struct s_smt_fp_txd *) HWM_GET_CURR_TXD(smc, queue);
+
+ dma_address = pci_map_single(&bp->pdev, skb->data,
+ skb->len, PCI_DMA_TODEVICE);
+ if (frame_status & LAN_TX) {
+ txd->txd_os.skb = skb; // save skb
+ txd->txd_os.dma_addr = dma_address; // save dma mapping
+ }
+ hwm_tx_frag(smc, skb->data, dma_address, skb->len,
+ frame_status | FIRST_FRAG | LAST_FRAG | EN_IRQ_EOF);
+
+ if (!(frame_status & LAN_TX)) { // local only frame
+ pci_unmap_single(&bp->pdev, dma_address,
+ skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb);
+ }
+ spin_unlock_irqrestore(&bp->DriverLock, Flags);
+ } // for
+
+ return; // never reached
+
+} // send_queued_packets
+
+
+/************************
+ *
+ * CheckSourceAddress
+ *
+ * Verify if the source address is set. Insert it if necessary.
+ *
+ ************************/
+static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr)
+{
+ unsigned char SRBit;
+
+ if ((((unsigned long) frame[1 + 6]) & ~0x01) != 0) // source routing bit
+
+ return;
+ if ((unsigned short) frame[1 + 10] != 0)
+ return;
+ SRBit = frame[1 + 6] & 0x01;
+ memcpy(&frame[1 + 6], hw_addr, ETH_ALEN);
+ frame[8] |= SRBit;
+} // CheckSourceAddress
+
+
+/************************
+ *
+ * ResetAdapter
+ *
+ * Reset the adapter and bring it back to operational mode.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ * Out
+ * Nothing.
+ *
+ ************************/
+static void ResetAdapter(struct s_smc *smc)
+{
+
+ pr_debug("[fddi: ResetAdapter]\n");
+
+ // Stop the adapter.
+
+ card_stop(smc); // Stop all activity.
+
+ // Clear the transmit and receive descriptor queues.
+ mac_drv_clear_tx_queue(smc);
+ mac_drv_clear_rx_queue(smc);
+
+ // Restart the adapter.
+
+ smt_reset_defaults(smc, 1); // Initialize the SMT module.
+
+ init_smt(smc, (smc->os.dev)->dev_addr); // Initialize the hardware.
+
+ smt_online(smc, 1); // Insert into the ring again.
+ STI_FBI();
+
+ // Restore original receive mode (multicasts, promiscuous, etc.).
+ skfp_ctl_set_multicast_list_wo_lock(smc->os.dev);
+} // ResetAdapter
+
+
+//--------------- functions called by hardware module ----------------
+
+/************************
+ *
+ * llc_restart_tx
+ *
+ * The hardware driver calls this routine when the transmit complete
+ * interrupt bits (end of frame) for the synchronous or asynchronous
+ * queue is set.
+ *
+ * NOTE The hardware driver calls this function also if no packets are queued.
+ * The routine must be able to handle this case.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void llc_restart_tx(struct s_smc *smc)
+{
+ skfddi_priv *bp = &smc->os;
+
+ pr_debug("[llc_restart_tx]\n");
+
+ // Try to send queued packets
+ spin_unlock(&bp->DriverLock);
+ send_queued_packets(smc);
+ spin_lock(&bp->DriverLock);
+ netif_start_queue(bp->dev);// system may send again if it was blocked
+
+} // llc_restart_tx
+
+
+/************************
+ *
+ * mac_drv_get_space
+ *
+ * The hardware module calls this function to allocate the memory
+ * for the SMT MBufs if the define MB_OUTSIDE_SMC is specified.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * size - Size of memory in bytes to allocate.
+ * Out
+ * != 0 A pointer to the virtual address of the allocated memory.
+ * == 0 Allocation error.
+ *
+ ************************/
+void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
+{
+ void *virt;
+
+ pr_debug("mac_drv_get_space (%d bytes), ", size);
+ virt = (void *) (smc->os.SharedMemAddr + smc->os.SharedMemHeap);
+
+ if ((smc->os.SharedMemHeap + size) > smc->os.SharedMemSize) {
+ printk("Unexpected SMT memory size requested: %d\n", size);
+ return NULL;
+ }
+ smc->os.SharedMemHeap += size; // Move heap pointer.
+
+ pr_debug("mac_drv_get_space end\n");
+ pr_debug("virt addr: %lx\n", (ulong) virt);
+ pr_debug("bus addr: %lx\n", (ulong)
+ (smc->os.SharedMemDMA +
+ ((char *) virt - (char *)smc->os.SharedMemAddr)));
+ return virt;
+} // mac_drv_get_space
+
+
+/************************
+ *
+ * mac_drv_get_desc_mem
+ *
+ * This function is called by the hardware dependent module.
+ * It allocates the memory for the RxD and TxD descriptors.
+ *
+ * This memory must be non-cached, non-movable and non-swappable.
+ * This memory should start at a physical page boundary.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * size - Size of memory in bytes to allocate.
+ * Out
+ * != 0 A pointer to the virtual address of the allocated memory.
+ * == 0 Allocation error.
+ *
+ ************************/
+void *mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size)
+{
+
+ char *virt;
+
+ pr_debug("mac_drv_get_desc_mem\n");
+
+ // Descriptor memory must be aligned on 16-byte boundary.
+
+ virt = mac_drv_get_space(smc, size);
+
+ size = (u_int) (16 - (((unsigned long) virt) & 15UL));
+ size = size % 16;
+
+ pr_debug("Allocate %u bytes alignment gap ", size);
+ pr_debug("for descriptor memory.\n");
+
+ if (!mac_drv_get_space(smc, size)) {
+ printk("fddi: Unable to align descriptor memory.\n");
+ return NULL;
+ }
+ return virt + size;
+} // mac_drv_get_desc_mem
+
+
+/************************
+ *
+ * mac_drv_virt2phys
+ *
+ * Get the physical address of a given virtual address.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * virt - A (virtual) pointer into our 'shared' memory area.
+ * Out
+ * Physical address of the given virtual address.
+ *
+ ************************/
+unsigned long mac_drv_virt2phys(struct s_smc *smc, void *virt)
+{
+ return smc->os.SharedMemDMA +
+ ((char *) virt - (char *)smc->os.SharedMemAddr);
+} // mac_drv_virt2phys
+
+
+/************************
+ *
+ * dma_master
+ *
+ * The HWM calls this function, when the driver leads through a DMA
+ * transfer. If the OS-specific module must prepare the system hardware
+ * for the DMA transfer, it should do it in this function.
+ *
+ * The hardware module calls this dma_master if it wants to send an SMT
+ * frame. This means that the virt address passed in here is part of
+ * the 'shared' memory area.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * virt - The virtual address of the data.
+ *
+ * len - The length in bytes of the data.
+ *
+ * flag - Indicates the transmit direction and the buffer type:
+ * DMA_RD (0x01) system RAM ==> adapter buffer memory
+ * DMA_WR (0x02) adapter buffer memory ==> system RAM
+ * SMT_BUF (0x80) SMT buffer
+ *
+ * >> NOTE: SMT_BUF and DMA_RD are always set for PCI. <<
+ * Out
+ * Returns the pyhsical address for the DMA transfer.
+ *
+ ************************/
+u_long dma_master(struct s_smc * smc, void *virt, int len, int flag)
+{
+ return smc->os.SharedMemDMA +
+ ((char *) virt - (char *)smc->os.SharedMemAddr);
+} // dma_master
+
+
+/************************
+ *
+ * dma_complete
+ *
+ * The hardware module calls this routine when it has completed a DMA
+ * transfer. If the operating system dependent module has set up the DMA
+ * channel via dma_master() (e.g. Windows NT or AIX) it should clean up
+ * the DMA channel.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * descr - A pointer to a TxD or RxD, respectively.
+ *
+ * flag - Indicates the DMA transfer direction / SMT buffer:
+ * DMA_RD (0x01) system RAM ==> adapter buffer memory
+ * DMA_WR (0x02) adapter buffer memory ==> system RAM
+ * SMT_BUF (0x80) SMT buffer (managed by HWM)
+ * Out
+ * Nothing.
+ *
+ ************************/
+void dma_complete(struct s_smc *smc, volatile union s_fp_descr *descr, int flag)
+{
+ /* For TX buffers, there are two cases. If it is an SMT transmit
+ * buffer, there is nothing to do since we use consistent memory
+ * for the 'shared' memory area. The other case is for normal
+ * transmit packets given to us by the networking stack, and in
+ * that case we cleanup the PCI DMA mapping in mac_drv_tx_complete
+ * below.
+ *
+ * For RX buffers, we have to unmap dynamic PCI DMA mappings here
+ * because the hardware module is about to potentially look at
+ * the contents of the buffer. If we did not call the PCI DMA
+ * unmap first, the hardware module could read inconsistent data.
+ */
+ if (flag & DMA_WR) {
+ skfddi_priv *bp = &smc->os;
+ volatile struct s_smt_fp_rxd *r = &descr->r;
+
+ /* If SKB is NULL, we used the local buffer. */
+ if (r->rxd_os.skb && r->rxd_os.dma_addr) {
+ int MaxFrameSize = bp->MaxFrameSize;
+
+ pci_unmap_single(&bp->pdev, r->rxd_os.dma_addr,
+ MaxFrameSize, PCI_DMA_FROMDEVICE);
+ r->rxd_os.dma_addr = 0;
+ }
+ }
+} // dma_complete
+
+
+/************************
+ *
+ * mac_drv_tx_complete
+ *
+ * Transmit of a packet is complete. Release the tx staging buffer.
+ *
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * txd - A pointer to the last TxD which is used by the frame.
+ * Out
+ * Returns nothing.
+ *
+ ************************/
+void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
+{
+ struct sk_buff *skb;
+
+ pr_debug("entering mac_drv_tx_complete\n");
+ // Check if this TxD points to a skb
+
+ if (!(skb = txd->txd_os.skb)) {
+ pr_debug("TXD with no skb assigned.\n");
+ return;
+ }
+ txd->txd_os.skb = NULL;
+
+ // release the DMA mapping
+ pci_unmap_single(&smc->os.pdev, txd->txd_os.dma_addr,
+ skb->len, PCI_DMA_TODEVICE);
+ txd->txd_os.dma_addr = 0;
+
+ smc->os.MacStat.gen.tx_packets++; // Count transmitted packets.
+ smc->os.MacStat.gen.tx_bytes+=skb->len; // Count bytes
+
+ // free the skb
+ dev_kfree_skb_irq(skb);
+
+ pr_debug("leaving mac_drv_tx_complete\n");
+} // mac_drv_tx_complete
+
+
+/************************
+ *
+ * dump packets to logfile
+ *
+ ************************/
+#ifdef DUMPPACKETS
+void dump_data(unsigned char *Data, int length)
+{
+ int i, j;
+ unsigned char s[255], sh[10];
+ if (length > 64) {
+ length = 64;
+ }
+ printk(KERN_INFO "---Packet start---\n");
+ for (i = 0, j = 0; i < length / 8; i++, j += 8)
+ printk(KERN_INFO "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ Data[j + 0], Data[j + 1], Data[j + 2], Data[j + 3],
+ Data[j + 4], Data[j + 5], Data[j + 6], Data[j + 7]);
+ strcpy(s, "");
+ for (i = 0; i < length % 8; i++) {
+ sprintf(sh, "%02x ", Data[j + i]);
+ strcat(s, sh);
+ }
+ printk(KERN_INFO "%s\n", s);
+ printk(KERN_INFO "------------------\n");
+} // dump_data
+#else
+#define dump_data(data,len)
+#endif // DUMPPACKETS
+
+/************************
+ *
+ * mac_drv_rx_complete
+ *
+ * The hardware module calls this function if an LLC frame is received
+ * in a receive buffer. Also the SMT, NSA, and directed beacon frames
+ * from the network will be passed to the LLC layer by this function
+ * if passing is enabled.
+ *
+ * mac_drv_rx_complete forwards the frame to the LLC layer if it should
+ * be received. It also fills the RxD ring with new receive buffers if
+ * some can be queued.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * rxd - A pointer to the first RxD which is used by the receive frame.
+ *
+ * frag_count - Count of RxDs used by the received frame.
+ *
+ * len - Frame length.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+ int frag_count, int len)
+{
+ skfddi_priv *bp = &smc->os;
+ struct sk_buff *skb;
+ unsigned char *virt, *cp;
+ unsigned short ri;
+ u_int RifLength;
+
+ pr_debug("entering mac_drv_rx_complete (len=%d)\n", len);
+ if (frag_count != 1) { // This is not allowed to happen.
+
+ printk("fddi: Multi-fragment receive!\n");
+ goto RequeueRxd; // Re-use the given RXD(s).
+
+ }
+ skb = rxd->rxd_os.skb;
+ if (!skb) {
+ pr_debug("No skb in rxd\n");
+ smc->os.MacStat.gen.rx_errors++;
+ goto RequeueRxd;
+ }
+ virt = skb->data;
+
+ // The DMA mapping was released in dma_complete above.
+
+ dump_data(skb->data, len);
+
+ /*
+ * FDDI Frame format:
+ * +-------+-------+-------+------------+--------+------------+
+ * | FC[1] | DA[6] | SA[6] | RIF[0..18] | LLC[3] | Data[0..n] |
+ * +-------+-------+-------+------------+--------+------------+
+ *
+ * FC = Frame Control
+ * DA = Destination Address
+ * SA = Source Address
+ * RIF = Routing Information Field
+ * LLC = Logical Link Control
+ */
+
+ // Remove Routing Information Field (RIF), if present.
+
+ if ((virt[1 + 6] & FDDI_RII) == 0)
+ RifLength = 0;
+ else {
+ int n;
+// goos: RIF removal has still to be tested
+ pr_debug("RIF found\n");
+ // Get RIF length from Routing Control (RC) field.
+ cp = virt + FDDI_MAC_HDR_LEN; // Point behind MAC header.
+
+ ri = ntohs(*((__be16 *) cp));
+ RifLength = ri & FDDI_RCF_LEN_MASK;
+ if (len < (int) (FDDI_MAC_HDR_LEN + RifLength)) {
+ printk("fddi: Invalid RIF.\n");
+ goto RequeueRxd; // Discard the frame.
+
+ }
+ virt[1 + 6] &= ~FDDI_RII; // Clear RII bit.
+ // regions overlap
+
+ virt = cp + RifLength;
+ for (n = FDDI_MAC_HDR_LEN; n; n--)
+ *--virt = *--cp;
+ // adjust sbd->data pointer
+ skb_pull(skb, RifLength);
+ len -= RifLength;
+ RifLength = 0;
+ }
+
+ // Count statistics.
+ smc->os.MacStat.gen.rx_packets++; // Count indicated receive
+ // packets.
+ smc->os.MacStat.gen.rx_bytes+=len; // Count bytes.
+
+ // virt points to header again
+ if (virt[1] & 0x01) { // Check group (multicast) bit.
+
+ smc->os.MacStat.gen.multicast++;
+ }
+
+ // deliver frame to system
+ rxd->rxd_os.skb = NULL;
+ skb_trim(skb, len);
+ skb->protocol = fddi_type_trans(skb, bp->dev);
+
+ netif_rx(skb);
+
+ HWM_RX_CHECK(smc, RX_LOW_WATERMARK);
+ return;
+
+ RequeueRxd:
+ pr_debug("Rx: re-queue RXD.\n");
+ mac_drv_requeue_rxd(smc, rxd, frag_count);
+ smc->os.MacStat.gen.rx_errors++; // Count receive packets
+ // not indicated.
+
+} // mac_drv_rx_complete
+
+
+/************************
+ *
+ * mac_drv_requeue_rxd
+ *
+ * The hardware module calls this function to request the OS-specific
+ * module to queue the receive buffer(s) represented by the pointer
+ * to the RxD and the frag_count into the receive queue again. This
+ * buffer was filled with an invalid frame or an SMT frame.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * rxd - A pointer to the first RxD which is used by the receive frame.
+ *
+ * frag_count - Count of RxDs used by the received frame.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+ int frag_count)
+{
+ volatile struct s_smt_fp_rxd *next_rxd;
+ volatile struct s_smt_fp_rxd *src_rxd;
+ struct sk_buff *skb;
+ int MaxFrameSize;
+ unsigned char *v_addr;
+ dma_addr_t b_addr;
+
+ if (frag_count != 1) // This is not allowed to happen.
+
+ printk("fddi: Multi-fragment requeue!\n");
+
+ MaxFrameSize = smc->os.MaxFrameSize;
+ src_rxd = rxd;
+ for (; frag_count > 0; frag_count--) {
+ next_rxd = src_rxd->rxd_next;
+ rxd = HWM_GET_CURR_RXD(smc);
+
+ skb = src_rxd->rxd_os.skb;
+ if (skb == NULL) { // this should not happen
+
+ pr_debug("Requeue with no skb in rxd!\n");
+ skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
+ if (skb) {
+ // we got a skb
+ rxd->rxd_os.skb = skb;
+ skb_reserve(skb, 3);
+ skb_put(skb, MaxFrameSize);
+ v_addr = skb->data;
+ b_addr = pci_map_single(&smc->os.pdev,
+ v_addr,
+ MaxFrameSize,
+ PCI_DMA_FROMDEVICE);
+ rxd->rxd_os.dma_addr = b_addr;
+ } else {
+ // no skb available, use local buffer
+ pr_debug("Queueing invalid buffer!\n");
+ rxd->rxd_os.skb = NULL;
+ v_addr = smc->os.LocalRxBuffer;
+ b_addr = smc->os.LocalRxBufferDMA;
+ }
+ } else {
+ // we use skb from old rxd
+ rxd->rxd_os.skb = skb;
+ v_addr = skb->data;
+ b_addr = pci_map_single(&smc->os.pdev,
+ v_addr,
+ MaxFrameSize,
+ PCI_DMA_FROMDEVICE);
+ rxd->rxd_os.dma_addr = b_addr;
+ }
+ hwm_rx_frag(smc, v_addr, b_addr, MaxFrameSize,
+ FIRST_FRAG | LAST_FRAG);
+
+ src_rxd = next_rxd;
+ }
+} // mac_drv_requeue_rxd
+
+
+/************************
+ *
+ * mac_drv_fill_rxd
+ *
+ * The hardware module calls this function at initialization time
+ * to fill the RxD ring with receive buffers. It is also called by
+ * mac_drv_rx_complete if rx_free is large enough to queue some new
+ * receive buffers into the RxD ring. mac_drv_fill_rxd queues new
+ * receive buffers as long as enough RxDs and receive buffers are
+ * available.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void mac_drv_fill_rxd(struct s_smc *smc)
+{
+ int MaxFrameSize;
+ unsigned char *v_addr;
+ unsigned long b_addr;
+ struct sk_buff *skb;
+ volatile struct s_smt_fp_rxd *rxd;
+
+ pr_debug("entering mac_drv_fill_rxd\n");
+
+ // Walk through the list of free receive buffers, passing receive
+ // buffers to the HWM as long as RXDs are available.
+
+ MaxFrameSize = smc->os.MaxFrameSize;
+ // Check if there is any RXD left.
+ while (HWM_GET_RX_FREE(smc) > 0) {
+ pr_debug(".\n");
+
+ rxd = HWM_GET_CURR_RXD(smc);
+ skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
+ if (skb) {
+ // we got a skb
+ skb_reserve(skb, 3);
+ skb_put(skb, MaxFrameSize);
+ v_addr = skb->data;
+ b_addr = pci_map_single(&smc->os.pdev,
+ v_addr,
+ MaxFrameSize,
+ PCI_DMA_FROMDEVICE);
+ rxd->rxd_os.dma_addr = b_addr;
+ } else {
+ // no skb available, use local buffer
+ // System has run out of buffer memory, but we want to
+ // keep the receiver running in hope of better times.
+ // Multiple descriptors may point to this local buffer,
+ // so data in it must be considered invalid.
+ pr_debug("Queueing invalid buffer!\n");
+ v_addr = smc->os.LocalRxBuffer;
+ b_addr = smc->os.LocalRxBufferDMA;
+ }
+
+ rxd->rxd_os.skb = skb;
+
+ // Pass receive buffer to HWM.
+ hwm_rx_frag(smc, v_addr, b_addr, MaxFrameSize,
+ FIRST_FRAG | LAST_FRAG);
+ }
+ pr_debug("leaving mac_drv_fill_rxd\n");
+} // mac_drv_fill_rxd
+
+
+/************************
+ *
+ * mac_drv_clear_rxd
+ *
+ * The hardware module calls this function to release unused
+ * receive buffers.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * rxd - A pointer to the first RxD which is used by the receive buffer.
+ *
+ * frag_count - Count of RxDs used by the receive buffer.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void mac_drv_clear_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+ int frag_count)
+{
+
+ struct sk_buff *skb;
+
+ pr_debug("entering mac_drv_clear_rxd\n");
+
+ if (frag_count != 1) // This is not allowed to happen.
+
+ printk("fddi: Multi-fragment clear!\n");
+
+ for (; frag_count > 0; frag_count--) {
+ skb = rxd->rxd_os.skb;
+ if (skb != NULL) {
+ skfddi_priv *bp = &smc->os;
+ int MaxFrameSize = bp->MaxFrameSize;
+
+ pci_unmap_single(&bp->pdev, rxd->rxd_os.dma_addr,
+ MaxFrameSize, PCI_DMA_FROMDEVICE);
+
+ dev_kfree_skb(skb);
+ rxd->rxd_os.skb = NULL;
+ }
+ rxd = rxd->rxd_next; // Next RXD.
+
+ }
+} // mac_drv_clear_rxd
+
+
+/************************
+ *
+ * mac_drv_rx_init
+ *
+ * The hardware module calls this routine when an SMT or NSA frame of the
+ * local SMT should be delivered to the LLC layer.
+ *
+ * It is necessary to have this function, because there is no other way to
+ * copy the contents of SMT MBufs into receive buffers.
+ *
+ * mac_drv_rx_init allocates the required target memory for this frame,
+ * and receives the frame fragment by fragment by calling mac_drv_rx_frag.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * len - The length (in bytes) of the received frame (FC, DA, SA, Data).
+ *
+ * fc - The Frame Control field of the received frame.
+ *
+ * look_ahead - A pointer to the lookahead data buffer (may be NULL).
+ *
+ * la_len - The length of the lookahead data stored in the lookahead
+ * buffer (may be zero).
+ * Out
+ * Always returns zero (0).
+ *
+ ************************/
+int mac_drv_rx_init(struct s_smc *smc, int len, int fc,
+ char *look_ahead, int la_len)
+{
+ struct sk_buff *skb;
+
+ pr_debug("entering mac_drv_rx_init(len=%d)\n", len);
+
+ // "Received" a SMT or NSA frame of the local SMT.
+
+ if (len != la_len || len < FDDI_MAC_HDR_LEN || !look_ahead) {
+ pr_debug("fddi: Discard invalid local SMT frame\n");
+ pr_debug(" len=%d, la_len=%d, (ULONG) look_ahead=%08lXh.\n",
+ len, la_len, (unsigned long) look_ahead);
+ return 0;
+ }
+ skb = alloc_skb(len + 3, GFP_ATOMIC);
+ if (!skb) {
+ pr_debug("fddi: Local SMT: skb memory exhausted.\n");
+ return 0;
+ }
+ skb_reserve(skb, 3);
+ skb_put(skb, len);
+ skb_copy_to_linear_data(skb, look_ahead, len);
+
+ // deliver frame to system
+ skb->protocol = fddi_type_trans(skb, smc->os.dev);
+ netif_rx(skb);
+
+ return 0;
+} // mac_drv_rx_init
+
+
+/************************
+ *
+ * smt_timer_poll
+ *
+ * This routine is called periodically by the SMT module to clean up the
+ * driver.
+ *
+ * Return any queued frames back to the upper protocol layers if the ring
+ * is down.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void smt_timer_poll(struct s_smc *smc)
+{
+} // smt_timer_poll
+
+
+/************************
+ *
+ * ring_status_indication
+ *
+ * This function indicates a change of the ring state.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * status - The current ring status.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void ring_status_indication(struct s_smc *smc, u_long status)
+{
+ pr_debug("ring_status_indication( ");
+ if (status & RS_RES15)
+ pr_debug("RS_RES15 ");
+ if (status & RS_HARDERROR)
+ pr_debug("RS_HARDERROR ");
+ if (status & RS_SOFTERROR)
+ pr_debug("RS_SOFTERROR ");
+ if (status & RS_BEACON)
+ pr_debug("RS_BEACON ");
+ if (status & RS_PATHTEST)
+ pr_debug("RS_PATHTEST ");
+ if (status & RS_SELFTEST)
+ pr_debug("RS_SELFTEST ");
+ if (status & RS_RES9)
+ pr_debug("RS_RES9 ");
+ if (status & RS_DISCONNECT)
+ pr_debug("RS_DISCONNECT ");
+ if (status & RS_RES7)
+ pr_debug("RS_RES7 ");
+ if (status & RS_DUPADDR)
+ pr_debug("RS_DUPADDR ");
+ if (status & RS_NORINGOP)
+ pr_debug("RS_NORINGOP ");
+ if (status & RS_VERSION)
+ pr_debug("RS_VERSION ");
+ if (status & RS_STUCKBYPASSS)
+ pr_debug("RS_STUCKBYPASSS ");
+ if (status & RS_EVENT)
+ pr_debug("RS_EVENT ");
+ if (status & RS_RINGOPCHANGE)
+ pr_debug("RS_RINGOPCHANGE ");
+ if (status & RS_RES0)
+ pr_debug("RS_RES0 ");
+ pr_debug("]\n");
+} // ring_status_indication
+
+
+/************************
+ *
+ * smt_get_time
+ *
+ * Gets the current time from the system.
+ * Args
+ * None.
+ * Out
+ * The current time in TICKS_PER_SECOND.
+ *
+ * TICKS_PER_SECOND has the unit 'count of timer ticks per second'. It is
+ * defined in "targetos.h". The definition of TICKS_PER_SECOND must comply
+ * to the time returned by smt_get_time().
+ *
+ ************************/
+unsigned long smt_get_time(void)
+{
+ return jiffies;
+} // smt_get_time
+
+
+/************************
+ *
+ * smt_stat_counter
+ *
+ * Status counter update (ring_op, fifo full).
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * stat - = 0: A ring operational change occurred.
+ * = 1: The FORMAC FIFO buffer is full / FIFO overflow.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void smt_stat_counter(struct s_smc *smc, int stat)
+{
+// BOOLEAN RingIsUp ;
+
+ pr_debug("smt_stat_counter\n");
+ switch (stat) {
+ case 0:
+ pr_debug("Ring operational change.\n");
+ break;
+ case 1:
+ pr_debug("Receive fifo overflow.\n");
+ smc->os.MacStat.gen.rx_errors++;
+ break;
+ default:
+ pr_debug("Unknown status (%d).\n", stat);
+ break;
+ }
+} // smt_stat_counter
+
+
+/************************
+ *
+ * cfm_state_change
+ *
+ * Sets CFM state in custom statistics.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * c_state - Possible values are:
+ *
+ * EC0_OUT, EC1_IN, EC2_TRACE, EC3_LEAVE, EC4_PATH_TEST,
+ * EC5_INSERT, EC6_CHECK, EC7_DEINSERT
+ * Out
+ * Nothing.
+ *
+ ************************/
+void cfm_state_change(struct s_smc *smc, int c_state)
+{
+#ifdef DRIVERDEBUG
+ char *s;
+
+ switch (c_state) {
+ case SC0_ISOLATED:
+ s = "SC0_ISOLATED";
+ break;
+ case SC1_WRAP_A:
+ s = "SC1_WRAP_A";
+ break;
+ case SC2_WRAP_B:
+ s = "SC2_WRAP_B";
+ break;
+ case SC4_THRU_A:
+ s = "SC4_THRU_A";
+ break;
+ case SC5_THRU_B:
+ s = "SC5_THRU_B";
+ break;
+ case SC7_WRAP_S:
+ s = "SC7_WRAP_S";
+ break;
+ case SC9_C_WRAP_A:
+ s = "SC9_C_WRAP_A";
+ break;
+ case SC10_C_WRAP_B:
+ s = "SC10_C_WRAP_B";
+ break;
+ case SC11_C_WRAP_S:
+ s = "SC11_C_WRAP_S";
+ break;
+ default:
+ pr_debug("cfm_state_change: unknown %d\n", c_state);
+ return;
+ }
+ pr_debug("cfm_state_change: %s\n", s);
+#endif // DRIVERDEBUG
+} // cfm_state_change
+
+
+/************************
+ *
+ * ecm_state_change
+ *
+ * Sets ECM state in custom statistics.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * e_state - Possible values are:
+ *
+ * SC0_ISOLATED, SC1_WRAP_A (5), SC2_WRAP_B (6), SC4_THRU_A (12),
+ * SC5_THRU_B (7), SC7_WRAP_S (8)
+ * Out
+ * Nothing.
+ *
+ ************************/
+void ecm_state_change(struct s_smc *smc, int e_state)
+{
+#ifdef DRIVERDEBUG
+ char *s;
+
+ switch (e_state) {
+ case EC0_OUT:
+ s = "EC0_OUT";
+ break;
+ case EC1_IN:
+ s = "EC1_IN";
+ break;
+ case EC2_TRACE:
+ s = "EC2_TRACE";
+ break;
+ case EC3_LEAVE:
+ s = "EC3_LEAVE";
+ break;
+ case EC4_PATH_TEST:
+ s = "EC4_PATH_TEST";
+ break;
+ case EC5_INSERT:
+ s = "EC5_INSERT";
+ break;
+ case EC6_CHECK:
+ s = "EC6_CHECK";
+ break;
+ case EC7_DEINSERT:
+ s = "EC7_DEINSERT";
+ break;
+ default:
+ s = "unknown";
+ break;
+ }
+ pr_debug("ecm_state_change: %s\n", s);
+#endif //DRIVERDEBUG
+} // ecm_state_change
+
+
+/************************
+ *
+ * rmt_state_change
+ *
+ * Sets RMT state in custom statistics.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ *
+ * r_state - Possible values are:
+ *
+ * RM0_ISOLATED, RM1_NON_OP, RM2_RING_OP, RM3_DETECT,
+ * RM4_NON_OP_DUP, RM5_RING_OP_DUP, RM6_DIRECTED, RM7_TRACE
+ * Out
+ * Nothing.
+ *
+ ************************/
+void rmt_state_change(struct s_smc *smc, int r_state)
+{
+#ifdef DRIVERDEBUG
+ char *s;
+
+ switch (r_state) {
+ case RM0_ISOLATED:
+ s = "RM0_ISOLATED";
+ break;
+ case RM1_NON_OP:
+ s = "RM1_NON_OP - not operational";
+ break;
+ case RM2_RING_OP:
+ s = "RM2_RING_OP - ring operational";
+ break;
+ case RM3_DETECT:
+ s = "RM3_DETECT - detect dupl addresses";
+ break;
+ case RM4_NON_OP_DUP:
+ s = "RM4_NON_OP_DUP - dupl. addr detected";
+ break;
+ case RM5_RING_OP_DUP:
+ s = "RM5_RING_OP_DUP - ring oper. with dupl. addr";
+ break;
+ case RM6_DIRECTED:
+ s = "RM6_DIRECTED - sending directed beacons";
+ break;
+ case RM7_TRACE:
+ s = "RM7_TRACE - trace initiated";
+ break;
+ default:
+ s = "unknown";
+ break;
+ }
+ pr_debug("[rmt_state_change: %s]\n", s);
+#endif // DRIVERDEBUG
+} // rmt_state_change
+
+
+/************************
+ *
+ * drv_reset_indication
+ *
+ * This function is called by the SMT when it has detected a severe
+ * hardware problem. The driver should perform a reset on the adapter
+ * as soon as possible, but not from within this function.
+ * Args
+ * smc - A pointer to the SMT context struct.
+ * Out
+ * Nothing.
+ *
+ ************************/
+void drv_reset_indication(struct s_smc *smc)
+{
+ pr_debug("entering drv_reset_indication\n");
+
+ smc->os.ResetRequested = TRUE; // Set flag.
+
+} // drv_reset_indication
+
+static struct pci_driver skfddi_pci_driver = {
+ .name = "skfddi",
+ .id_table = skfddi_pci_tbl,
+ .probe = skfp_init_one,
+ .remove = skfp_remove_one,
+};
+
+module_pci_driver(skfddi_pci_driver);
diff --git a/drivers/net/fddi/skfp/smt.c b/drivers/net/fddi/skfp/smt.c
new file mode 100644
index 000000000..cd78b7cac
--- /dev/null
+++ b/drivers/net/fddi/skfp/smt.c
@@ -0,0 +1,2034 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+#include <linux/bitrev.h>
+#include <linux/kernel.h>
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)smt.c 2.43 98/11/23 (C) SK " ;
+#endif
+
+/*
+ * FC in SMbuf
+ */
+#define m_fc(mb) ((mb)->sm_data[0])
+
+#define SMT_TID_MAGIC 0x1f0a7b3c
+
+#ifdef DEBUG
+static const char *const smt_type_name[] = {
+ "SMT_00??", "SMT_INFO", "SMT_02??", "SMT_03??",
+ "SMT_04??", "SMT_05??", "SMT_06??", "SMT_07??",
+ "SMT_08??", "SMT_09??", "SMT_0A??", "SMT_0B??",
+ "SMT_0C??", "SMT_0D??", "SMT_0E??", "SMT_NSA"
+} ;
+
+static const char *const smt_class_name[] = {
+ "UNKNOWN","NIF","SIF_CONFIG","SIF_OPER","ECF","RAF","RDF",
+ "SRF","PMF_GET","PMF_SET","ESF"
+} ;
+#endif
+#define LAST_CLASS (SMT_PMF_SET)
+
+static const struct fddi_addr SMT_Unknown = {
+ { 0,0,0x1f,0,0,0 }
+} ;
+
+/*
+ * function prototypes
+ */
+#ifdef LITTLE_ENDIAN
+static int smt_swap_short(u_short s);
+#endif
+static int mac_index(struct s_smc *smc, int mac);
+static int phy_index(struct s_smc *smc, int phy);
+static int mac_con_resource_index(struct s_smc *smc, int mac);
+static int phy_con_resource_index(struct s_smc *smc, int phy);
+static void smt_send_rdf(struct s_smc *smc, SMbuf *rej, int fc, int reason,
+ int local);
+static void smt_send_nif(struct s_smc *smc, const struct fddi_addr *dest,
+ int fc, u_long tid, int type, int local);
+static void smt_send_ecf(struct s_smc *smc, struct fddi_addr *dest, int fc,
+ u_long tid, int type, int len);
+static void smt_echo_test(struct s_smc *smc, int dna);
+static void smt_send_sif_config(struct s_smc *smc, struct fddi_addr *dest,
+ u_long tid, int local);
+static void smt_send_sif_operation(struct s_smc *smc, struct fddi_addr *dest,
+ u_long tid, int local);
+#ifdef LITTLE_ENDIAN
+static void smt_string_swap(char *data, const char *format, int len);
+#endif
+static void smt_add_frame_len(SMbuf *mb, int len);
+static void smt_fill_una(struct s_smc *smc, struct smt_p_una *una);
+static void smt_fill_sde(struct s_smc *smc, struct smt_p_sde *sde);
+static void smt_fill_state(struct s_smc *smc, struct smt_p_state *state);
+static void smt_fill_timestamp(struct s_smc *smc, struct smt_p_timestamp *ts);
+static void smt_fill_policy(struct s_smc *smc, struct smt_p_policy *policy);
+static void smt_fill_latency(struct s_smc *smc, struct smt_p_latency *latency);
+static void smt_fill_neighbor(struct s_smc *smc, struct smt_p_neighbor *neighbor);
+static int smt_fill_path(struct s_smc *smc, struct smt_p_path *path);
+static void smt_fill_mac_status(struct s_smc *smc, struct smt_p_mac_status *st);
+static void smt_fill_lem(struct s_smc *smc, struct smt_p_lem *lem, int phy);
+static void smt_fill_version(struct s_smc *smc, struct smt_p_version *vers);
+static void smt_fill_fsc(struct s_smc *smc, struct smt_p_fsc *fsc);
+static void smt_fill_mac_counter(struct s_smc *smc, struct smt_p_mac_counter *mc);
+static void smt_fill_mac_fnc(struct s_smc *smc, struct smt_p_mac_fnc *fnc);
+static void smt_fill_manufacturer(struct s_smc *smc,
+ struct smp_p_manufacturer *man);
+static void smt_fill_user(struct s_smc *smc, struct smp_p_user *user);
+static void smt_fill_setcount(struct s_smc *smc, struct smt_p_setcount *setcount);
+static void smt_fill_echo(struct s_smc *smc, struct smt_p_echo *echo, u_long seed,
+ int len);
+
+static void smt_clear_una_dna(struct s_smc *smc);
+static void smt_clear_old_una_dna(struct s_smc *smc);
+#ifdef CONCENTRATOR
+static int entity_to_index(void);
+#endif
+static void update_dac(struct s_smc *smc, int report);
+static int div_ratio(u_long upper, u_long lower);
+#ifdef USE_CAN_ADDR
+static void hwm_conv_can(struct s_smc *smc, char *data, int len);
+#else
+#define hwm_conv_can(smc,data,len)
+#endif
+
+
+static inline int is_my_addr(const struct s_smc *smc,
+ const struct fddi_addr *addr)
+{
+ return(*(short *)(&addr->a[0]) ==
+ *(short *)(&smc->mib.m[MAC0].fddiMACSMTAddress.a[0])
+ && *(short *)(&addr->a[2]) ==
+ *(short *)(&smc->mib.m[MAC0].fddiMACSMTAddress.a[2])
+ && *(short *)(&addr->a[4]) ==
+ *(short *)(&smc->mib.m[MAC0].fddiMACSMTAddress.a[4])) ;
+}
+
+static inline int is_broadcast(const struct fddi_addr *addr)
+{
+ return *(u_short *)(&addr->a[0]) == 0xffff &&
+ *(u_short *)(&addr->a[2]) == 0xffff &&
+ *(u_short *)(&addr->a[4]) == 0xffff;
+}
+
+static inline int is_individual(const struct fddi_addr *addr)
+{
+ return !(addr->a[0] & GROUP_ADDR);
+}
+
+static inline int is_equal(const struct fddi_addr *addr1,
+ const struct fddi_addr *addr2)
+{
+ return *(u_short *)(&addr1->a[0]) == *(u_short *)(&addr2->a[0]) &&
+ *(u_short *)(&addr1->a[2]) == *(u_short *)(&addr2->a[2]) &&
+ *(u_short *)(&addr1->a[4]) == *(u_short *)(&addr2->a[4]);
+}
+
+/*
+ * list of mandatory paras in frames
+ */
+static const u_short plist_nif[] = { SMT_P_UNA,SMT_P_SDE,SMT_P_STATE,0 } ;
+
+/*
+ * init SMT agent
+ */
+void smt_agent_init(struct s_smc *smc)
+{
+ int i ;
+
+ /*
+ * get MAC address
+ */
+ smc->mib.m[MAC0].fddiMACSMTAddress = smc->hw.fddi_home_addr ;
+
+ /*
+ * get OUI address from driver (bia == built-in-address)
+ */
+ smc->mib.fddiSMTStationId.sid_oem[0] = 0 ;
+ smc->mib.fddiSMTStationId.sid_oem[1] = 0 ;
+ driver_get_bia(smc,&smc->mib.fddiSMTStationId.sid_node) ;
+ for (i = 0 ; i < 6 ; i ++) {
+ smc->mib.fddiSMTStationId.sid_node.a[i] =
+ bitrev8(smc->mib.fddiSMTStationId.sid_node.a[i]);
+ }
+ smc->mib.fddiSMTManufacturerData[0] =
+ smc->mib.fddiSMTStationId.sid_node.a[0] ;
+ smc->mib.fddiSMTManufacturerData[1] =
+ smc->mib.fddiSMTStationId.sid_node.a[1] ;
+ smc->mib.fddiSMTManufacturerData[2] =
+ smc->mib.fddiSMTStationId.sid_node.a[2] ;
+ smc->sm.smt_tid = 0 ;
+ smc->mib.m[MAC0].fddiMACDupAddressTest = DA_NONE ;
+ smc->mib.m[MAC0].fddiMACUNDA_Flag = FALSE ;
+#ifndef SLIM_SMT
+ smt_clear_una_dna(smc) ;
+ smt_clear_old_una_dna(smc) ;
+#endif
+ for (i = 0 ; i < SMT_MAX_TEST ; i++)
+ smc->sm.pend[i] = 0 ;
+ smc->sm.please_reconnect = 0 ;
+ smc->sm.uniq_ticks = 0 ;
+}
+
+/*
+ * SMT task
+ * forever
+ * delay 30 seconds
+ * send NIF
+ * check tvu & tvd
+ * end
+ */
+void smt_agent_task(struct s_smc *smc)
+{
+ smt_timer_start(smc,&smc->sm.smt_timer, (u_long)1000000L,
+ EV_TOKEN(EVENT_SMT,SM_TIMER)) ;
+ DB_SMT("SMT agent task\n",0,0) ;
+}
+
+#ifndef SMT_REAL_TOKEN_CT
+void smt_emulate_token_ct(struct s_smc *smc, int mac_index)
+{
+ u_long count;
+ u_long time;
+
+
+ time = smt_get_time();
+ count = ((time - smc->sm.last_tok_time[mac_index]) *
+ 100)/TICKS_PER_SECOND;
+
+ /*
+ * Only when ring is up we will have a token count. The
+ * flag is unfortunately a single instance value. This
+ * doesn't matter now, because we currently have only
+ * one MAC instance.
+ */
+ if (smc->hw.mac_ring_is_up){
+ smc->mib.m[mac_index].fddiMACToken_Ct += count;
+ }
+
+ /* Remember current time */
+ smc->sm.last_tok_time[mac_index] = time;
+
+}
+#endif
+
+/*ARGSUSED1*/
+void smt_event(struct s_smc *smc, int event)
+{
+ u_long time ;
+#ifndef SMT_REAL_TOKEN_CT
+ int i ;
+#endif
+
+
+ if (smc->sm.please_reconnect) {
+ smc->sm.please_reconnect -- ;
+ if (smc->sm.please_reconnect == 0) {
+ /* Counted down */
+ queue_event(smc,EVENT_ECM,EC_CONNECT) ;
+ }
+ }
+
+ if (event == SM_FAST)
+ return ;
+
+ /*
+ * timer for periodic cleanup in driver
+ * reset and start the watchdog (FM2)
+ * ESS timer
+ * SBA timer
+ */
+ smt_timer_poll(smc) ;
+ smt_start_watchdog(smc) ;
+#ifndef SLIM_SMT
+#ifndef BOOT
+#ifdef ESS
+ ess_timer_poll(smc) ;
+#endif
+#endif
+#ifdef SBA
+ sba_timer_poll(smc) ;
+#endif
+
+ smt_srf_event(smc,0,0,0) ;
+
+#endif /* no SLIM_SMT */
+
+ time = smt_get_time() ;
+
+ if (time - smc->sm.smt_last_lem >= TICKS_PER_SECOND*8) {
+ /*
+ * Use 8 sec. for the time intervall, it simplifies the
+ * LER estimation.
+ */
+ struct fddi_mib_m *mib ;
+ u_long upper ;
+ u_long lower ;
+ int cond ;
+ int port;
+ struct s_phy *phy ;
+ /*
+ * calculate LEM bit error rate
+ */
+ sm_lem_evaluate(smc) ;
+ smc->sm.smt_last_lem = time ;
+
+ /*
+ * check conditions
+ */
+#ifndef SLIM_SMT
+ mac_update_counter(smc) ;
+ mib = smc->mib.m ;
+ upper =
+ (mib->fddiMACLost_Ct - mib->fddiMACOld_Lost_Ct) +
+ (mib->fddiMACError_Ct - mib->fddiMACOld_Error_Ct) ;
+ lower =
+ (mib->fddiMACFrame_Ct - mib->fddiMACOld_Frame_Ct) +
+ (mib->fddiMACLost_Ct - mib->fddiMACOld_Lost_Ct) ;
+ mib->fddiMACFrameErrorRatio = div_ratio(upper,lower) ;
+
+ cond =
+ ((!mib->fddiMACFrameErrorThreshold &&
+ mib->fddiMACError_Ct != mib->fddiMACOld_Error_Ct) ||
+ (mib->fddiMACFrameErrorRatio >
+ mib->fddiMACFrameErrorThreshold)) ;
+
+ if (cond != mib->fddiMACFrameErrorFlag)
+ smt_srf_event(smc,SMT_COND_MAC_FRAME_ERROR,
+ INDEX_MAC,cond) ;
+
+ upper =
+ (mib->fddiMACNotCopied_Ct - mib->fddiMACOld_NotCopied_Ct) ;
+ lower =
+ upper +
+ (mib->fddiMACCopied_Ct - mib->fddiMACOld_Copied_Ct) ;
+ mib->fddiMACNotCopiedRatio = div_ratio(upper,lower) ;
+
+ cond =
+ ((!mib->fddiMACNotCopiedThreshold &&
+ mib->fddiMACNotCopied_Ct !=
+ mib->fddiMACOld_NotCopied_Ct)||
+ (mib->fddiMACNotCopiedRatio >
+ mib->fddiMACNotCopiedThreshold)) ;
+
+ if (cond != mib->fddiMACNotCopiedFlag)
+ smt_srf_event(smc,SMT_COND_MAC_NOT_COPIED,
+ INDEX_MAC,cond) ;
+
+ /*
+ * set old values
+ */
+ mib->fddiMACOld_Frame_Ct = mib->fddiMACFrame_Ct ;
+ mib->fddiMACOld_Copied_Ct = mib->fddiMACCopied_Ct ;
+ mib->fddiMACOld_Error_Ct = mib->fddiMACError_Ct ;
+ mib->fddiMACOld_Lost_Ct = mib->fddiMACLost_Ct ;
+ mib->fddiMACOld_NotCopied_Ct = mib->fddiMACNotCopied_Ct ;
+
+ /*
+ * Check port EBError Condition
+ */
+ for (port = 0; port < NUMPHYS; port ++) {
+ phy = &smc->y[port] ;
+
+ if (!phy->mib->fddiPORTHardwarePresent) {
+ continue;
+ }
+
+ cond = (phy->mib->fddiPORTEBError_Ct -
+ phy->mib->fddiPORTOldEBError_Ct > 5) ;
+
+ /* If ratio is more than 5 in 8 seconds
+ * Set the condition.
+ */
+ smt_srf_event(smc,SMT_COND_PORT_EB_ERROR,
+ (int) (INDEX_PORT+ phy->np) ,cond) ;
+
+ /*
+ * set old values
+ */
+ phy->mib->fddiPORTOldEBError_Ct =
+ phy->mib->fddiPORTEBError_Ct ;
+ }
+
+#endif /* no SLIM_SMT */
+ }
+
+#ifndef SLIM_SMT
+
+ if (time - smc->sm.smt_last_notify >= (u_long)
+ (smc->mib.fddiSMTTT_Notify * TICKS_PER_SECOND) ) {
+ /*
+ * we can either send an announcement or a request
+ * a request will trigger a reply so that we can update
+ * our dna
+ * note: same tid must be used until reply is received
+ */
+ if (!smc->sm.pend[SMT_TID_NIF])
+ smc->sm.pend[SMT_TID_NIF] = smt_get_tid(smc) ;
+ smt_send_nif(smc,&fddi_broadcast, FC_SMT_NSA,
+ smc->sm.pend[SMT_TID_NIF], SMT_REQUEST,0) ;
+ smc->sm.smt_last_notify = time ;
+ }
+
+ /*
+ * check timer
+ */
+ if (smc->sm.smt_tvu &&
+ time - smc->sm.smt_tvu > 228*TICKS_PER_SECOND) {
+ DB_SMT("SMT : UNA expired\n",0,0) ;
+ smc->sm.smt_tvu = 0 ;
+
+ if (!is_equal(&smc->mib.m[MAC0].fddiMACUpstreamNbr,
+ &SMT_Unknown)){
+ /* Do not update unknown address */
+ smc->mib.m[MAC0].fddiMACOldUpstreamNbr=
+ smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+ }
+ smc->mib.m[MAC0].fddiMACUpstreamNbr = SMT_Unknown ;
+ smc->mib.m[MAC0].fddiMACUNDA_Flag = FALSE ;
+ /*
+ * Make sure the fddiMACUNDA_Flag = FALSE is
+ * included in the SRF so we don't generate
+ * a separate SRF for the deassertion of this
+ * condition
+ */
+ update_dac(smc,0) ;
+ smt_srf_event(smc, SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+ INDEX_MAC,0) ;
+ }
+ if (smc->sm.smt_tvd &&
+ time - smc->sm.smt_tvd > 228*TICKS_PER_SECOND) {
+ DB_SMT("SMT : DNA expired\n",0,0) ;
+ smc->sm.smt_tvd = 0 ;
+ if (!is_equal(&smc->mib.m[MAC0].fddiMACDownstreamNbr,
+ &SMT_Unknown)){
+ /* Do not update unknown address */
+ smc->mib.m[MAC0].fddiMACOldDownstreamNbr=
+ smc->mib.m[MAC0].fddiMACDownstreamNbr ;
+ }
+ smc->mib.m[MAC0].fddiMACDownstreamNbr = SMT_Unknown ;
+ smt_srf_event(smc, SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+ INDEX_MAC,0) ;
+ }
+
+#endif /* no SLIM_SMT */
+
+#ifndef SMT_REAL_TOKEN_CT
+ /*
+ * Token counter emulation section. If hardware supports the token
+ * count, the token counter will be updated in mac_update_counter.
+ */
+ for (i = MAC0; i < NUMMACS; i++ ){
+ if (time - smc->sm.last_tok_time[i] > 2*TICKS_PER_SECOND ){
+ smt_emulate_token_ct( smc, i );
+ }
+ }
+#endif
+
+ smt_timer_start(smc,&smc->sm.smt_timer, (u_long)1000000L,
+ EV_TOKEN(EVENT_SMT,SM_TIMER)) ;
+}
+
+static int div_ratio(u_long upper, u_long lower)
+{
+ if ((upper<<16L) < upper)
+ upper = 0xffff0000L ;
+ else
+ upper <<= 16L ;
+ if (!lower)
+ return 0;
+ return (int)(upper/lower) ;
+}
+
+#ifndef SLIM_SMT
+
+/*
+ * receive packet handler
+ */
+void smt_received_pack(struct s_smc *smc, SMbuf *mb, int fs)
+/* int fs; frame status */
+{
+ struct smt_header *sm ;
+ int local ;
+
+ int illegal = 0 ;
+
+ switch (m_fc(mb)) {
+ case FC_SMT_INFO :
+ case FC_SMT_LAN_LOC :
+ case FC_SMT_LOC :
+ case FC_SMT_NSA :
+ break ;
+ default :
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+
+ smc->mib.m[MAC0].fddiMACSMTCopied_Ct++ ;
+ sm = smtod(mb,struct smt_header *) ;
+ local = ((fs & L_INDICATOR) != 0) ;
+ hwm_conv_can(smc,(char *)sm,12) ;
+
+ /* check destination address */
+ if (is_individual(&sm->smt_dest) && !is_my_addr(smc,&sm->smt_dest)) {
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+#if 0 /* for DUP recognition, do NOT filter them */
+ /* ignore loop back packets */
+ if (is_my_addr(smc,&sm->smt_source) && !local) {
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+#endif
+
+ smt_swap_para(sm,(int) mb->sm_len,1) ;
+ DB_SMT("SMT : received packet [%s] at 0x%x\n",
+ smt_type_name[m_fc(mb) & 0xf],sm) ;
+ DB_SMT("SMT : version %d, class %s\n",sm->smt_version,
+ smt_class_name[(sm->smt_class>LAST_CLASS)?0 : sm->smt_class]) ;
+
+#ifdef SBA
+ /*
+ * check if NSA frame
+ */
+ if (m_fc(mb) == FC_SMT_NSA && sm->smt_class == SMT_NIF &&
+ (sm->smt_type == SMT_ANNOUNCE || sm->smt_type == SMT_REQUEST)) {
+ smc->sba.sm = sm ;
+ sba(smc,NIF) ;
+ }
+#endif
+
+ /*
+ * ignore any packet with NSA and A-indicator set
+ */
+ if ( (fs & A_INDICATOR) && m_fc(mb) == FC_SMT_NSA) {
+ DB_SMT("SMT : ignoring NSA with A-indicator set from %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+
+ /*
+ * ignore frames with illegal length
+ */
+ if (((sm->smt_class == SMT_ECF) && (sm->smt_len > SMT_MAX_ECHO_LEN)) ||
+ ((sm->smt_class != SMT_ECF) && (sm->smt_len > SMT_MAX_INFO_LEN))) {
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+
+ /*
+ * check SMT version
+ */
+ switch (sm->smt_class) {
+ case SMT_NIF :
+ case SMT_SIF_CONFIG :
+ case SMT_SIF_OPER :
+ case SMT_ECF :
+ if (sm->smt_version != SMT_VID)
+ illegal = 1;
+ break ;
+ default :
+ if (sm->smt_version != SMT_VID_2)
+ illegal = 1;
+ break ;
+ }
+ if (illegal) {
+ DB_SMT("SMT : version = %d, dest = %s\n",
+ sm->smt_version,addr_to_string(&sm->smt_source)) ;
+ smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_VERSION,local) ;
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+ if ((sm->smt_len > mb->sm_len - sizeof(struct smt_header)) ||
+ ((sm->smt_len & 3) && (sm->smt_class != SMT_ECF))) {
+ DB_SMT("SMT: info length error, len = %d\n",sm->smt_len,0) ;
+ smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_LENGTH,local) ;
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+ switch (sm->smt_class) {
+ case SMT_NIF :
+ if (smt_check_para(smc,sm,plist_nif)) {
+ DB_SMT("SMT: NIF with para problem, ignoring\n",0,0) ;
+ break ;
+ }
+ switch (sm->smt_type) {
+ case SMT_ANNOUNCE :
+ case SMT_REQUEST :
+ if (!(fs & C_INDICATOR) && m_fc(mb) == FC_SMT_NSA
+ && is_broadcast(&sm->smt_dest)) {
+ struct smt_p_state *st ;
+
+ /* set my UNA */
+ if (!is_equal(
+ &smc->mib.m[MAC0].fddiMACUpstreamNbr,
+ &sm->smt_source)) {
+ DB_SMT("SMT : updated my UNA = %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ if (!is_equal(&smc->mib.m[MAC0].
+ fddiMACUpstreamNbr,&SMT_Unknown)){
+ /* Do not update unknown address */
+ smc->mib.m[MAC0].fddiMACOldUpstreamNbr=
+ smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+ }
+
+ smc->mib.m[MAC0].fddiMACUpstreamNbr =
+ sm->smt_source ;
+ smt_srf_event(smc,
+ SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+ INDEX_MAC,0) ;
+ smt_echo_test(smc,0) ;
+ }
+ smc->sm.smt_tvu = smt_get_time() ;
+ st = (struct smt_p_state *)
+ sm_to_para(smc,sm,SMT_P_STATE) ;
+ if (st) {
+ smc->mib.m[MAC0].fddiMACUNDA_Flag =
+ (st->st_dupl_addr & SMT_ST_MY_DUPA) ?
+ TRUE : FALSE ;
+ update_dac(smc,1) ;
+ }
+ }
+ if ((sm->smt_type == SMT_REQUEST) &&
+ is_individual(&sm->smt_source) &&
+ ((!(fs & A_INDICATOR) && m_fc(mb) == FC_SMT_NSA) ||
+ (m_fc(mb) != FC_SMT_NSA))) {
+ DB_SMT("SMT : replying to NIF request %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ smt_send_nif(smc,&sm->smt_source,
+ FC_SMT_INFO,
+ sm->smt_tid,
+ SMT_REPLY,local) ;
+ }
+ break ;
+ case SMT_REPLY :
+ DB_SMT("SMT : received NIF response from %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ if (fs & A_INDICATOR) {
+ smc->sm.pend[SMT_TID_NIF] = 0 ;
+ DB_SMT("SMT : duplicate address\n",0,0) ;
+ smc->mib.m[MAC0].fddiMACDupAddressTest =
+ DA_FAILED ;
+ smc->r.dup_addr_test = DA_FAILED ;
+ queue_event(smc,EVENT_RMT,RM_DUP_ADDR) ;
+ smc->mib.m[MAC0].fddiMACDA_Flag = TRUE ;
+ update_dac(smc,1) ;
+ break ;
+ }
+ if (sm->smt_tid == smc->sm.pend[SMT_TID_NIF]) {
+ smc->sm.pend[SMT_TID_NIF] = 0 ;
+ /* set my DNA */
+ if (!is_equal(
+ &smc->mib.m[MAC0].fddiMACDownstreamNbr,
+ &sm->smt_source)) {
+ DB_SMT("SMT : updated my DNA\n",0,0) ;
+ if (!is_equal(&smc->mib.m[MAC0].
+ fddiMACDownstreamNbr, &SMT_Unknown)){
+ /* Do not update unknown address */
+ smc->mib.m[MAC0].fddiMACOldDownstreamNbr =
+ smc->mib.m[MAC0].fddiMACDownstreamNbr ;
+ }
+
+ smc->mib.m[MAC0].fddiMACDownstreamNbr =
+ sm->smt_source ;
+ smt_srf_event(smc,
+ SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+ INDEX_MAC,0) ;
+ smt_echo_test(smc,1) ;
+ }
+ smc->mib.m[MAC0].fddiMACDA_Flag = FALSE ;
+ update_dac(smc,1) ;
+ smc->sm.smt_tvd = smt_get_time() ;
+ smc->mib.m[MAC0].fddiMACDupAddressTest =
+ DA_PASSED ;
+ if (smc->r.dup_addr_test != DA_PASSED) {
+ smc->r.dup_addr_test = DA_PASSED ;
+ queue_event(smc,EVENT_RMT,RM_DUP_ADDR) ;
+ }
+ }
+ else if (sm->smt_tid ==
+ smc->sm.pend[SMT_TID_NIF_TEST]) {
+ DB_SMT("SMT : NIF test TID ok\n",0,0) ;
+ }
+ else {
+ DB_SMT("SMT : expected TID %lx, got %lx\n",
+ smc->sm.pend[SMT_TID_NIF],sm->smt_tid) ;
+ }
+ break ;
+ default :
+ illegal = 2 ;
+ break ;
+ }
+ break ;
+ case SMT_SIF_CONFIG : /* station information */
+ if (sm->smt_type != SMT_REQUEST)
+ break ;
+ DB_SMT("SMT : replying to SIF Config request from %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ smt_send_sif_config(smc,&sm->smt_source,sm->smt_tid,local) ;
+ break ;
+ case SMT_SIF_OPER : /* station information */
+ if (sm->smt_type != SMT_REQUEST)
+ break ;
+ DB_SMT("SMT : replying to SIF Operation request from %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ smt_send_sif_operation(smc,&sm->smt_source,sm->smt_tid,local) ;
+ break ;
+ case SMT_ECF : /* echo frame */
+ switch (sm->smt_type) {
+ case SMT_REPLY :
+ smc->mib.priv.fddiPRIVECF_Reply_Rx++ ;
+ DB_SMT("SMT: received ECF reply from %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+ if (sm_to_para(smc,sm,SMT_P_ECHODATA) == NULL) {
+ DB_SMT("SMT: ECHODATA missing\n",0,0) ;
+ break ;
+ }
+ if (sm->smt_tid == smc->sm.pend[SMT_TID_ECF]) {
+ DB_SMT("SMT : ECF test TID ok\n",0,0) ;
+ }
+ else if (sm->smt_tid == smc->sm.pend[SMT_TID_ECF_UNA]) {
+ DB_SMT("SMT : ECF test UNA ok\n",0,0) ;
+ }
+ else if (sm->smt_tid == smc->sm.pend[SMT_TID_ECF_DNA]) {
+ DB_SMT("SMT : ECF test DNA ok\n",0,0) ;
+ }
+ else {
+ DB_SMT("SMT : expected TID %lx, got %lx\n",
+ smc->sm.pend[SMT_TID_ECF],
+ sm->smt_tid) ;
+ }
+ break ;
+ case SMT_REQUEST :
+ smc->mib.priv.fddiPRIVECF_Req_Rx++ ;
+ {
+ if (sm->smt_len && !sm_to_para(smc,sm,SMT_P_ECHODATA)) {
+ DB_SMT("SMT: ECF with para problem,sending RDF\n",0,0) ;
+ smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_LENGTH,
+ local) ;
+ break ;
+ }
+ DB_SMT("SMT - sending ECF reply to %s\n",
+ addr_to_string(&sm->smt_source),0) ;
+
+ /* set destination addr. & reply */
+ sm->smt_dest = sm->smt_source ;
+ sm->smt_type = SMT_REPLY ;
+ dump_smt(smc,sm,"ECF REPLY") ;
+ smc->mib.priv.fddiPRIVECF_Reply_Tx++ ;
+ smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+ return ; /* DON'T free mbuf */
+ }
+ default :
+ illegal = 1 ;
+ break ;
+ }
+ break ;
+#ifndef BOOT
+ case SMT_RAF : /* resource allocation */
+#ifdef ESS
+ DB_ESSN(2,"ESS: RAF frame received\n",0,0) ;
+ fs = ess_raf_received_pack(smc,mb,sm,fs) ;
+#endif
+
+#ifdef SBA
+ DB_SBAN(2,"SBA: RAF frame received\n",0,0) ;
+ sba_raf_received_pack(smc,sm,fs) ;
+#endif
+ break ;
+ case SMT_RDF : /* request denied */
+ smc->mib.priv.fddiPRIVRDF_Rx++ ;
+ break ;
+ case SMT_ESF : /* extended service - not supported */
+ if (sm->smt_type == SMT_REQUEST) {
+ DB_SMT("SMT - received ESF, sending RDF\n",0,0) ;
+ smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_CLASS,local) ;
+ }
+ break ;
+ case SMT_PMF_GET :
+ case SMT_PMF_SET :
+ if (sm->smt_type != SMT_REQUEST)
+ break ;
+ /* update statistics */
+ if (sm->smt_class == SMT_PMF_GET)
+ smc->mib.priv.fddiPRIVPMF_Get_Rx++ ;
+ else
+ smc->mib.priv.fddiPRIVPMF_Set_Rx++ ;
+ /*
+ * ignore PMF SET with I/G set
+ */
+ if ((sm->smt_class == SMT_PMF_SET) &&
+ !is_individual(&sm->smt_dest)) {
+ DB_SMT("SMT: ignoring PMF-SET with I/G set\n",0,0) ;
+ break ;
+ }
+ smt_pmf_received_pack(smc,mb, local) ;
+ break ;
+ case SMT_SRF :
+ dump_smt(smc,sm,"SRF received") ;
+ break ;
+ default :
+ if (sm->smt_type != SMT_REQUEST)
+ break ;
+ /*
+ * For frames with unknown class:
+ * we need to send a RDF frame according to 8.1.3.1.1,
+ * only if it is a REQUEST.
+ */
+ DB_SMT("SMT : class = %d, send RDF to %s\n",
+ sm->smt_class, addr_to_string(&sm->smt_source)) ;
+
+ smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_CLASS,local) ;
+ break ;
+#endif
+ }
+ if (illegal) {
+ DB_SMT("SMT: discarding invalid frame, reason = %d\n",
+ illegal,0) ;
+ }
+ smt_free_mbuf(smc,mb) ;
+}
+
+static void update_dac(struct s_smc *smc, int report)
+{
+ int cond ;
+
+ cond = ( smc->mib.m[MAC0].fddiMACUNDA_Flag |
+ smc->mib.m[MAC0].fddiMACDA_Flag) != 0 ;
+ if (report && (cond != smc->mib.m[MAC0].fddiMACDuplicateAddressCond))
+ smt_srf_event(smc, SMT_COND_MAC_DUP_ADDR,INDEX_MAC,cond) ;
+ else
+ smc->mib.m[MAC0].fddiMACDuplicateAddressCond = cond ;
+}
+
+/*
+ * send SMT frame
+ * set source address
+ * set station ID
+ * send frame
+ */
+void smt_send_frame(struct s_smc *smc, SMbuf *mb, int fc, int local)
+/* SMbuf *mb; buffer to send */
+/* int fc; FC value */
+{
+ struct smt_header *sm ;
+
+ if (!smc->r.sm_ma_avail && !local) {
+ smt_free_mbuf(smc,mb) ;
+ return ;
+ }
+ sm = smtod(mb,struct smt_header *) ;
+ sm->smt_source = smc->mib.m[MAC0].fddiMACSMTAddress ;
+ sm->smt_sid = smc->mib.fddiSMTStationId ;
+
+ smt_swap_para(sm,(int) mb->sm_len,0) ; /* swap para & header */
+ hwm_conv_can(smc,(char *)sm,12) ; /* convert SA and DA */
+ smc->mib.m[MAC0].fddiMACSMTTransmit_Ct++ ;
+ smt_send_mbuf(smc,mb,local ? FC_SMT_LOC : fc) ;
+}
+
+/*
+ * generate and send RDF
+ */
+static void smt_send_rdf(struct s_smc *smc, SMbuf *rej, int fc, int reason,
+ int local)
+/* SMbuf *rej; mbuf of offending frame */
+/* int fc; FC of denied frame */
+/* int reason; reason code */
+{
+ SMbuf *mb ;
+ struct smt_header *sm ; /* header of offending frame */
+ struct smt_rdf *rdf ;
+ int len ;
+ int frame_len ;
+
+ sm = smtod(rej,struct smt_header *) ;
+ if (sm->smt_type != SMT_REQUEST)
+ return ;
+
+ DB_SMT("SMT: sending RDF to %s,reason = 0x%x\n",
+ addr_to_string(&sm->smt_source),reason) ;
+
+
+ /*
+ * note: get framelength from MAC length, NOT from SMT header
+ * smt header length is included in sm_len
+ */
+ frame_len = rej->sm_len ;
+
+ if (!(mb=smt_build_frame(smc,SMT_RDF,SMT_REPLY,sizeof(struct smt_rdf))))
+ return ;
+ rdf = smtod(mb,struct smt_rdf *) ;
+ rdf->smt.smt_tid = sm->smt_tid ; /* use TID from sm */
+ rdf->smt.smt_dest = sm->smt_source ; /* set dest = source */
+
+ /* set P12 */
+ rdf->reason.para.p_type = SMT_P_REASON ;
+ rdf->reason.para.p_len = sizeof(struct smt_p_reason) - PARA_LEN ;
+ rdf->reason.rdf_reason = reason ;
+
+ /* set P14 */
+ rdf->version.para.p_type = SMT_P_VERSION ;
+ rdf->version.para.p_len = sizeof(struct smt_p_version) - PARA_LEN ;
+ rdf->version.v_pad = 0 ;
+ rdf->version.v_n = 1 ;
+ rdf->version.v_index = 1 ;
+ rdf->version.v_version[0] = SMT_VID_2 ;
+ rdf->version.v_pad2 = 0 ;
+
+ /* set P13 */
+ if ((unsigned int) frame_len <= SMT_MAX_INFO_LEN - sizeof(*rdf) +
+ 2*sizeof(struct smt_header))
+ len = frame_len ;
+ else
+ len = SMT_MAX_INFO_LEN - sizeof(*rdf) +
+ 2*sizeof(struct smt_header) ;
+ /* make length multiple of 4 */
+ len &= ~3 ;
+ rdf->refused.para.p_type = SMT_P_REFUSED ;
+ /* length of para is smt_frame + ref_fc */
+ rdf->refused.para.p_len = len + 4 ;
+ rdf->refused.ref_fc = fc ;
+
+ /* swap it back */
+ smt_swap_para(sm,frame_len,0) ;
+
+ memcpy((char *) &rdf->refused.ref_header,(char *) sm,len) ;
+
+ len -= sizeof(struct smt_header) ;
+ mb->sm_len += len ;
+ rdf->smt.smt_len += len ;
+
+ dump_smt(smc,(struct smt_header *)rdf,"RDF") ;
+ smc->mib.priv.fddiPRIVRDF_Tx++ ;
+ smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+}
+
+/*
+ * generate and send NIF
+ */
+static void smt_send_nif(struct s_smc *smc, const struct fddi_addr *dest,
+ int fc, u_long tid, int type, int local)
+/* struct fddi_addr *dest; dest address */
+/* int fc; frame control */
+/* u_long tid; transaction id */
+/* int type; frame type */
+{
+ struct smt_nif *nif ;
+ SMbuf *mb ;
+
+ if (!(mb = smt_build_frame(smc,SMT_NIF,type,sizeof(struct smt_nif))))
+ return ;
+ nif = smtod(mb, struct smt_nif *) ;
+ smt_fill_una(smc,&nif->una) ; /* set UNA */
+ smt_fill_sde(smc,&nif->sde) ; /* set station descriptor */
+ smt_fill_state(smc,&nif->state) ; /* set state information */
+#ifdef SMT6_10
+ smt_fill_fsc(smc,&nif->fsc) ; /* set frame status cap. */
+#endif
+ nif->smt.smt_dest = *dest ; /* destination address */
+ nif->smt.smt_tid = tid ; /* transaction ID */
+ dump_smt(smc,(struct smt_header *)nif,"NIF") ;
+ smt_send_frame(smc,mb,fc,local) ;
+}
+
+#ifdef DEBUG
+/*
+ * send NIF request (test purpose)
+ */
+static void smt_send_nif_request(struct s_smc *smc, struct fddi_addr *dest)
+{
+ smc->sm.pend[SMT_TID_NIF_TEST] = smt_get_tid(smc) ;
+ smt_send_nif(smc,dest, FC_SMT_INFO, smc->sm.pend[SMT_TID_NIF_TEST],
+ SMT_REQUEST,0) ;
+}
+
+/*
+ * send ECF request (test purpose)
+ */
+static void smt_send_ecf_request(struct s_smc *smc, struct fddi_addr *dest,
+ int len)
+{
+ smc->sm.pend[SMT_TID_ECF] = smt_get_tid(smc) ;
+ smt_send_ecf(smc,dest, FC_SMT_INFO, smc->sm.pend[SMT_TID_ECF],
+ SMT_REQUEST,len) ;
+}
+#endif
+
+/*
+ * echo test
+ */
+static void smt_echo_test(struct s_smc *smc, int dna)
+{
+ u_long tid ;
+
+ smc->sm.pend[dna ? SMT_TID_ECF_DNA : SMT_TID_ECF_UNA] =
+ tid = smt_get_tid(smc) ;
+ smt_send_ecf(smc, dna ?
+ &smc->mib.m[MAC0].fddiMACDownstreamNbr :
+ &smc->mib.m[MAC0].fddiMACUpstreamNbr,
+ FC_SMT_INFO,tid, SMT_REQUEST, (SMT_TEST_ECHO_LEN & ~3)-8) ;
+}
+
+/*
+ * generate and send ECF
+ */
+static void smt_send_ecf(struct s_smc *smc, struct fddi_addr *dest, int fc,
+ u_long tid, int type, int len)
+/* struct fddi_addr *dest; dest address */
+/* int fc; frame control */
+/* u_long tid; transaction id */
+/* int type; frame type */
+/* int len; frame length */
+{
+ struct smt_ecf *ecf ;
+ SMbuf *mb ;
+
+ if (!(mb = smt_build_frame(smc,SMT_ECF,type,SMT_ECF_LEN + len)))
+ return ;
+ ecf = smtod(mb, struct smt_ecf *) ;
+
+ smt_fill_echo(smc,&ecf->ec_echo,tid,len) ; /* set ECHO */
+ ecf->smt.smt_dest = *dest ; /* destination address */
+ ecf->smt.smt_tid = tid ; /* transaction ID */
+ smc->mib.priv.fddiPRIVECF_Req_Tx++ ;
+ smt_send_frame(smc,mb,fc,0) ;
+}
+
+/*
+ * generate and send SIF config response
+ */
+
+static void smt_send_sif_config(struct s_smc *smc, struct fddi_addr *dest,
+ u_long tid, int local)
+/* struct fddi_addr *dest; dest address */
+/* u_long tid; transaction id */
+{
+ struct smt_sif_config *sif ;
+ SMbuf *mb ;
+ int len ;
+ if (!(mb = smt_build_frame(smc,SMT_SIF_CONFIG,SMT_REPLY,
+ SIZEOF_SMT_SIF_CONFIG)))
+ return ;
+
+ sif = smtod(mb, struct smt_sif_config *) ;
+ smt_fill_timestamp(smc,&sif->ts) ; /* set time stamp */
+ smt_fill_sde(smc,&sif->sde) ; /* set station descriptor */
+ smt_fill_version(smc,&sif->version) ; /* set version information */
+ smt_fill_state(smc,&sif->state) ; /* set state information */
+ smt_fill_policy(smc,&sif->policy) ; /* set station policy */
+ smt_fill_latency(smc,&sif->latency); /* set station latency */
+ smt_fill_neighbor(smc,&sif->neighbor); /* set station neighbor */
+ smt_fill_setcount(smc,&sif->setcount) ; /* set count */
+ len = smt_fill_path(smc,&sif->path); /* set station path descriptor*/
+ sif->smt.smt_dest = *dest ; /* destination address */
+ sif->smt.smt_tid = tid ; /* transaction ID */
+ smt_add_frame_len(mb,len) ; /* adjust length fields */
+ dump_smt(smc,(struct smt_header *)sif,"SIF Configuration Reply") ;
+ smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+}
+
+/*
+ * generate and send SIF operation response
+ */
+
+static void smt_send_sif_operation(struct s_smc *smc, struct fddi_addr *dest,
+ u_long tid, int local)
+/* struct fddi_addr *dest; dest address */
+/* u_long tid; transaction id */
+{
+ struct smt_sif_operation *sif ;
+ SMbuf *mb ;
+ int ports ;
+ int i ;
+
+ ports = NUMPHYS ;
+#ifndef CONCENTRATOR
+ if (smc->s.sas == SMT_SAS)
+ ports = 1 ;
+#endif
+
+ if (!(mb = smt_build_frame(smc,SMT_SIF_OPER,SMT_REPLY,
+ SIZEOF_SMT_SIF_OPERATION+ports*sizeof(struct smt_p_lem))))
+ return ;
+ sif = smtod(mb, struct smt_sif_operation *) ;
+ smt_fill_timestamp(smc,&sif->ts) ; /* set time stamp */
+ smt_fill_mac_status(smc,&sif->status) ; /* set mac status */
+ smt_fill_mac_counter(smc,&sif->mc) ; /* set mac counter field */
+ smt_fill_mac_fnc(smc,&sif->fnc) ; /* set frame not copied counter */
+ smt_fill_manufacturer(smc,&sif->man) ; /* set manufacturer field */
+ smt_fill_user(smc,&sif->user) ; /* set user field */
+ smt_fill_setcount(smc,&sif->setcount) ; /* set count */
+ /*
+ * set link error mon information
+ */
+ if (ports == 1) {
+ smt_fill_lem(smc,sif->lem,PS) ;
+ }
+ else {
+ for (i = 0 ; i < ports ; i++) {
+ smt_fill_lem(smc,&sif->lem[i],i) ;
+ }
+ }
+
+ sif->smt.smt_dest = *dest ; /* destination address */
+ sif->smt.smt_tid = tid ; /* transaction ID */
+ dump_smt(smc,(struct smt_header *)sif,"SIF Operation Reply") ;
+ smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+}
+
+/*
+ * get and initialize SMT frame
+ */
+SMbuf *smt_build_frame(struct s_smc *smc, int class, int type,
+ int length)
+{
+ SMbuf *mb ;
+ struct smt_header *smt ;
+
+#if 0
+ if (!smc->r.sm_ma_avail) {
+ return 0;
+ }
+#endif
+ if (!(mb = smt_get_mbuf(smc)))
+ return mb;
+
+ mb->sm_len = length ;
+ smt = smtod(mb, struct smt_header *) ;
+ smt->smt_dest = fddi_broadcast ; /* set dest = broadcast */
+ smt->smt_class = class ;
+ smt->smt_type = type ;
+ switch (class) {
+ case SMT_NIF :
+ case SMT_SIF_CONFIG :
+ case SMT_SIF_OPER :
+ case SMT_ECF :
+ smt->smt_version = SMT_VID ;
+ break ;
+ default :
+ smt->smt_version = SMT_VID_2 ;
+ break ;
+ }
+ smt->smt_tid = smt_get_tid(smc) ; /* set transaction ID */
+ smt->smt_pad = 0 ;
+ smt->smt_len = length - sizeof(struct smt_header) ;
+ return mb;
+}
+
+static void smt_add_frame_len(SMbuf *mb, int len)
+{
+ struct smt_header *smt ;
+
+ smt = smtod(mb, struct smt_header *) ;
+ smt->smt_len += len ;
+ mb->sm_len += len ;
+}
+
+
+
+/*
+ * fill values in UNA parameter
+ */
+static void smt_fill_una(struct s_smc *smc, struct smt_p_una *una)
+{
+ SMTSETPARA(una,SMT_P_UNA) ;
+ una->una_pad = 0 ;
+ una->una_node = smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+}
+
+/*
+ * fill values in SDE parameter
+ */
+static void smt_fill_sde(struct s_smc *smc, struct smt_p_sde *sde)
+{
+ SMTSETPARA(sde,SMT_P_SDE) ;
+ sde->sde_non_master = smc->mib.fddiSMTNonMaster_Ct ;
+ sde->sde_master = smc->mib.fddiSMTMaster_Ct ;
+ sde->sde_mac_count = NUMMACS ; /* only 1 MAC */
+#ifdef CONCENTRATOR
+ sde->sde_type = SMT_SDE_CONCENTRATOR ;
+#else
+ sde->sde_type = SMT_SDE_STATION ;
+#endif
+}
+
+/*
+ * fill in values in station state parameter
+ */
+static void smt_fill_state(struct s_smc *smc, struct smt_p_state *state)
+{
+ int top ;
+ int twist ;
+
+ SMTSETPARA(state,SMT_P_STATE) ;
+ state->st_pad = 0 ;
+
+ /* determine topology */
+ top = 0 ;
+ if (smc->mib.fddiSMTPeerWrapFlag) {
+ top |= SMT_ST_WRAPPED ; /* state wrapped */
+ }
+#ifdef CONCENTRATOR
+ if (cfm_status_unattached(smc)) {
+ top |= SMT_ST_UNATTACHED ; /* unattached concentrator */
+ }
+#endif
+ if ((twist = pcm_status_twisted(smc)) & 1) {
+ top |= SMT_ST_TWISTED_A ; /* twisted cable */
+ }
+ if (twist & 2) {
+ top |= SMT_ST_TWISTED_B ; /* twisted cable */
+ }
+#ifdef OPT_SRF
+ top |= SMT_ST_SRF ;
+#endif
+ if (pcm_rooted_station(smc))
+ top |= SMT_ST_ROOTED_S ;
+ if (smc->mib.a[0].fddiPATHSbaPayload != 0)
+ top |= SMT_ST_SYNC_SERVICE ;
+ state->st_topology = top ;
+ state->st_dupl_addr =
+ ((smc->mib.m[MAC0].fddiMACDA_Flag ? SMT_ST_MY_DUPA : 0 ) |
+ (smc->mib.m[MAC0].fddiMACUNDA_Flag ? SMT_ST_UNA_DUPA : 0)) ;
+}
+
+/*
+ * fill values in timestamp parameter
+ */
+static void smt_fill_timestamp(struct s_smc *smc, struct smt_p_timestamp *ts)
+{
+
+ SMTSETPARA(ts,SMT_P_TIMESTAMP) ;
+ smt_set_timestamp(smc,ts->ts_time) ;
+}
+
+void smt_set_timestamp(struct s_smc *smc, u_char *p)
+{
+ u_long time ;
+ u_long utime ;
+
+ /*
+ * timestamp is 64 bits long ; resolution is 80 nS
+ * our clock resolution is 10mS
+ * 10mS/80ns = 125000 ~ 2^17 = 131072
+ */
+ utime = smt_get_time() ;
+ time = utime * 100 ;
+ time /= TICKS_PER_SECOND ;
+ p[0] = 0 ;
+ p[1] = (u_char)((time>>(8+8+8+8-1)) & 1) ;
+ p[2] = (u_char)(time>>(8+8+8-1)) ;
+ p[3] = (u_char)(time>>(8+8-1)) ;
+ p[4] = (u_char)(time>>(8-1)) ;
+ p[5] = (u_char)(time<<1) ;
+ p[6] = (u_char)(smc->sm.uniq_ticks>>8) ;
+ p[7] = (u_char)smc->sm.uniq_ticks ;
+ /*
+ * make sure we don't wrap: restart whenever the upper digits change
+ */
+ if (utime != smc->sm.uniq_time) {
+ smc->sm.uniq_ticks = 0 ;
+ }
+ smc->sm.uniq_ticks++ ;
+ smc->sm.uniq_time = utime ;
+}
+
+/*
+ * fill values in station policy parameter
+ */
+static void smt_fill_policy(struct s_smc *smc, struct smt_p_policy *policy)
+{
+ int i ;
+ const u_char *map ;
+ u_short in ;
+ u_short out ;
+
+ /*
+ * MIB para 101b (fddiSMTConnectionPolicy) coding
+ * is different from 0005 coding
+ */
+ static const u_char ansi_weirdness[16] = {
+ 0,7,5,3,8,1,6,4,9,10,2,11,12,13,14,15
+ } ;
+ SMTSETPARA(policy,SMT_P_POLICY) ;
+
+ out = 0 ;
+ in = smc->mib.fddiSMTConnectionPolicy ;
+ for (i = 0, map = ansi_weirdness ; i < 16 ; i++) {
+ if (in & 1)
+ out |= (1<<*map) ;
+ in >>= 1 ;
+ map++ ;
+ }
+ policy->pl_config = smc->mib.fddiSMTConfigPolicy ;
+ policy->pl_connect = out ;
+}
+
+/*
+ * fill values in latency equivalent parameter
+ */
+static void smt_fill_latency(struct s_smc *smc, struct smt_p_latency *latency)
+{
+ SMTSETPARA(latency,SMT_P_LATENCY) ;
+
+ latency->lt_phyout_idx1 = phy_index(smc,0) ;
+ latency->lt_latency1 = 10 ; /* in octets (byte clock) */
+ /*
+ * note: latency has two phy entries by definition
+ * for a SAS, the 2nd one is null
+ */
+ if (smc->s.sas == SMT_DAS) {
+ latency->lt_phyout_idx2 = phy_index(smc,1) ;
+ latency->lt_latency2 = 10 ; /* in octets (byte clock) */
+ }
+ else {
+ latency->lt_phyout_idx2 = 0 ;
+ latency->lt_latency2 = 0 ;
+ }
+}
+
+/*
+ * fill values in MAC neighbors parameter
+ */
+static void smt_fill_neighbor(struct s_smc *smc, struct smt_p_neighbor *neighbor)
+{
+ SMTSETPARA(neighbor,SMT_P_NEIGHBORS) ;
+
+ neighbor->nb_mib_index = INDEX_MAC ;
+ neighbor->nb_mac_index = mac_index(smc,1) ;
+ neighbor->nb_una = smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+ neighbor->nb_dna = smc->mib.m[MAC0].fddiMACDownstreamNbr ;
+}
+
+/*
+ * fill values in path descriptor
+ */
+#ifdef CONCENTRATOR
+#define ALLPHYS NUMPHYS
+#else
+#define ALLPHYS ((smc->s.sas == SMT_SAS) ? 1 : 2)
+#endif
+
+static int smt_fill_path(struct s_smc *smc, struct smt_p_path *path)
+{
+ SK_LOC_DECL(int,type) ;
+ SK_LOC_DECL(int,state) ;
+ SK_LOC_DECL(int,remote) ;
+ SK_LOC_DECL(int,mac) ;
+ int len ;
+ int p ;
+ int physp ;
+ struct smt_phy_rec *phy ;
+ struct smt_mac_rec *pd_mac ;
+
+ len = PARA_LEN +
+ sizeof(struct smt_mac_rec) * NUMMACS +
+ sizeof(struct smt_phy_rec) * ALLPHYS ;
+ path->para.p_type = SMT_P_PATH ;
+ path->para.p_len = len - PARA_LEN ;
+
+ /* PHYs */
+ for (p = 0,phy = path->pd_phy ; p < ALLPHYS ; p++, phy++) {
+ physp = p ;
+#ifndef CONCENTRATOR
+ if (smc->s.sas == SMT_SAS)
+ physp = PS ;
+#endif
+ pcm_status_state(smc,physp,&type,&state,&remote,&mac) ;
+#ifdef LITTLE_ENDIAN
+ phy->phy_mib_index = smt_swap_short((u_short)p+INDEX_PORT) ;
+#else
+ phy->phy_mib_index = p+INDEX_PORT ;
+#endif
+ phy->phy_type = type ;
+ phy->phy_connect_state = state ;
+ phy->phy_remote_type = remote ;
+ phy->phy_remote_mac = mac ;
+ phy->phy_resource_idx = phy_con_resource_index(smc,p) ;
+ }
+
+ /* MAC */
+ pd_mac = (struct smt_mac_rec *) phy ;
+ pd_mac->mac_addr = smc->mib.m[MAC0].fddiMACSMTAddress ;
+ pd_mac->mac_resource_idx = mac_con_resource_index(smc,1) ;
+ return len;
+}
+
+/*
+ * fill values in mac status
+ */
+static void smt_fill_mac_status(struct s_smc *smc, struct smt_p_mac_status *st)
+{
+ SMTSETPARA(st,SMT_P_MAC_STATUS) ;
+
+ st->st_mib_index = INDEX_MAC ;
+ st->st_mac_index = mac_index(smc,1) ;
+
+ mac_update_counter(smc) ;
+ /*
+ * timer values are represented in SMT as 2's complement numbers
+ * units : internal : 2's complement BCLK
+ */
+ st->st_t_req = smc->mib.m[MAC0].fddiMACT_Req ;
+ st->st_t_neg = smc->mib.m[MAC0].fddiMACT_Neg ;
+ st->st_t_max = smc->mib.m[MAC0].fddiMACT_Max ;
+ st->st_tvx_value = smc->mib.m[MAC0].fddiMACTvxValue ;
+ st->st_t_min = smc->mib.m[MAC0].fddiMACT_Min ;
+
+ st->st_sba = smc->mib.a[PATH0].fddiPATHSbaPayload ;
+ st->st_frame_ct = smc->mib.m[MAC0].fddiMACFrame_Ct ;
+ st->st_error_ct = smc->mib.m[MAC0].fddiMACError_Ct ;
+ st->st_lost_ct = smc->mib.m[MAC0].fddiMACLost_Ct ;
+}
+
+/*
+ * fill values in LEM status
+ */
+static void smt_fill_lem(struct s_smc *smc, struct smt_p_lem *lem, int phy)
+{
+ struct fddi_mib_p *mib ;
+
+ mib = smc->y[phy].mib ;
+
+ SMTSETPARA(lem,SMT_P_LEM) ;
+ lem->lem_mib_index = phy+INDEX_PORT ;
+ lem->lem_phy_index = phy_index(smc,phy) ;
+ lem->lem_pad2 = 0 ;
+ lem->lem_cutoff = mib->fddiPORTLer_Cutoff ;
+ lem->lem_alarm = mib->fddiPORTLer_Alarm ;
+ /* long term bit error rate */
+ lem->lem_estimate = mib->fddiPORTLer_Estimate ;
+ /* # of rejected connections */
+ lem->lem_reject_ct = mib->fddiPORTLem_Reject_Ct ;
+ lem->lem_ct = mib->fddiPORTLem_Ct ; /* total number of errors */
+}
+
+/*
+ * fill version parameter
+ */
+static void smt_fill_version(struct s_smc *smc, struct smt_p_version *vers)
+{
+ SK_UNUSED(smc) ;
+ SMTSETPARA(vers,SMT_P_VERSION) ;
+ vers->v_pad = 0 ;
+ vers->v_n = 1 ; /* one version is enough .. */
+ vers->v_index = 1 ;
+ vers->v_version[0] = SMT_VID_2 ;
+ vers->v_pad2 = 0 ;
+}
+
+#ifdef SMT6_10
+/*
+ * fill frame status capabilities
+ */
+/*
+ * note: this para 200B is NOT in swap table, because it's also set in
+ * PMF add_para
+ */
+static void smt_fill_fsc(struct s_smc *smc, struct smt_p_fsc *fsc)
+{
+ SK_UNUSED(smc) ;
+ SMTSETPARA(fsc,SMT_P_FSC) ;
+ fsc->fsc_pad0 = 0 ;
+ fsc->fsc_mac_index = INDEX_MAC ; /* this is MIB ; MIB is NOT
+ * mac_index ()i !
+ */
+ fsc->fsc_pad1 = 0 ;
+ fsc->fsc_value = FSC_TYPE0 ; /* "normal" node */
+#ifdef LITTLE_ENDIAN
+ fsc->fsc_mac_index = smt_swap_short(INDEX_MAC) ;
+ fsc->fsc_value = smt_swap_short(FSC_TYPE0) ;
+#endif
+}
+#endif
+
+/*
+ * fill mac counter field
+ */
+static void smt_fill_mac_counter(struct s_smc *smc, struct smt_p_mac_counter *mc)
+{
+ SMTSETPARA(mc,SMT_P_MAC_COUNTER) ;
+ mc->mc_mib_index = INDEX_MAC ;
+ mc->mc_index = mac_index(smc,1) ;
+ mc->mc_receive_ct = smc->mib.m[MAC0].fddiMACCopied_Ct ;
+ mc->mc_transmit_ct = smc->mib.m[MAC0].fddiMACTransmit_Ct ;
+}
+
+/*
+ * fill mac frame not copied counter
+ */
+static void smt_fill_mac_fnc(struct s_smc *smc, struct smt_p_mac_fnc *fnc)
+{
+ SMTSETPARA(fnc,SMT_P_MAC_FNC) ;
+ fnc->nc_mib_index = INDEX_MAC ;
+ fnc->nc_index = mac_index(smc,1) ;
+ fnc->nc_counter = smc->mib.m[MAC0].fddiMACNotCopied_Ct ;
+}
+
+
+/*
+ * fill manufacturer field
+ */
+static void smt_fill_manufacturer(struct s_smc *smc,
+ struct smp_p_manufacturer *man)
+{
+ SMTSETPARA(man,SMT_P_MANUFACTURER) ;
+ memcpy((char *) man->mf_data,
+ (char *) smc->mib.fddiSMTManufacturerData,
+ sizeof(man->mf_data)) ;
+}
+
+/*
+ * fill user field
+ */
+static void smt_fill_user(struct s_smc *smc, struct smp_p_user *user)
+{
+ SMTSETPARA(user,SMT_P_USER) ;
+ memcpy((char *) user->us_data,
+ (char *) smc->mib.fddiSMTUserData,
+ sizeof(user->us_data)) ;
+}
+
+/*
+ * fill set count
+ */
+static void smt_fill_setcount(struct s_smc *smc, struct smt_p_setcount *setcount)
+{
+ SK_UNUSED(smc) ;
+ SMTSETPARA(setcount,SMT_P_SETCOUNT) ;
+ setcount->count = smc->mib.fddiSMTSetCount.count ;
+ memcpy((char *)setcount->timestamp,
+ (char *)smc->mib.fddiSMTSetCount.timestamp,8) ;
+}
+
+/*
+ * fill echo data
+ */
+static void smt_fill_echo(struct s_smc *smc, struct smt_p_echo *echo, u_long seed,
+ int len)
+{
+ u_char *p ;
+
+ SK_UNUSED(smc) ;
+ SMTSETPARA(echo,SMT_P_ECHODATA) ;
+ echo->para.p_len = len ;
+ for (p = echo->ec_data ; len ; len--) {
+ *p++ = (u_char) seed ;
+ seed += 13 ;
+ }
+}
+
+/*
+ * clear DNA and UNA
+ * called from CFM if configuration changes
+ */
+static void smt_clear_una_dna(struct s_smc *smc)
+{
+ smc->mib.m[MAC0].fddiMACUpstreamNbr = SMT_Unknown ;
+ smc->mib.m[MAC0].fddiMACDownstreamNbr = SMT_Unknown ;
+}
+
+static void smt_clear_old_una_dna(struct s_smc *smc)
+{
+ smc->mib.m[MAC0].fddiMACOldUpstreamNbr = SMT_Unknown ;
+ smc->mib.m[MAC0].fddiMACOldDownstreamNbr = SMT_Unknown ;
+}
+
+u_long smt_get_tid(struct s_smc *smc)
+{
+ u_long tid ;
+ while ((tid = ++(smc->sm.smt_tid) ^ SMT_TID_MAGIC) == 0)
+ ;
+ return tid & 0x3fffffffL;
+}
+
+
+/*
+ * table of parameter lengths
+ */
+static const struct smt_pdef {
+ int ptype ;
+ int plen ;
+ const char *pswap ;
+} smt_pdef[] = {
+ { SMT_P_UNA, sizeof(struct smt_p_una) ,
+ SWAP_SMT_P_UNA } ,
+ { SMT_P_SDE, sizeof(struct smt_p_sde) ,
+ SWAP_SMT_P_SDE } ,
+ { SMT_P_STATE, sizeof(struct smt_p_state) ,
+ SWAP_SMT_P_STATE } ,
+ { SMT_P_TIMESTAMP,sizeof(struct smt_p_timestamp) ,
+ SWAP_SMT_P_TIMESTAMP } ,
+ { SMT_P_POLICY, sizeof(struct smt_p_policy) ,
+ SWAP_SMT_P_POLICY } ,
+ { SMT_P_LATENCY, sizeof(struct smt_p_latency) ,
+ SWAP_SMT_P_LATENCY } ,
+ { SMT_P_NEIGHBORS,sizeof(struct smt_p_neighbor) ,
+ SWAP_SMT_P_NEIGHBORS } ,
+ { SMT_P_PATH, sizeof(struct smt_p_path) ,
+ SWAP_SMT_P_PATH } ,
+ { SMT_P_MAC_STATUS,sizeof(struct smt_p_mac_status) ,
+ SWAP_SMT_P_MAC_STATUS } ,
+ { SMT_P_LEM, sizeof(struct smt_p_lem) ,
+ SWAP_SMT_P_LEM } ,
+ { SMT_P_MAC_COUNTER,sizeof(struct smt_p_mac_counter) ,
+ SWAP_SMT_P_MAC_COUNTER } ,
+ { SMT_P_MAC_FNC,sizeof(struct smt_p_mac_fnc) ,
+ SWAP_SMT_P_MAC_FNC } ,
+ { SMT_P_PRIORITY,sizeof(struct smt_p_priority) ,
+ SWAP_SMT_P_PRIORITY } ,
+ { SMT_P_EB,sizeof(struct smt_p_eb) ,
+ SWAP_SMT_P_EB } ,
+ { SMT_P_MANUFACTURER,sizeof(struct smp_p_manufacturer) ,
+ SWAP_SMT_P_MANUFACTURER } ,
+ { SMT_P_REASON, sizeof(struct smt_p_reason) ,
+ SWAP_SMT_P_REASON } ,
+ { SMT_P_REFUSED, sizeof(struct smt_p_refused) ,
+ SWAP_SMT_P_REFUSED } ,
+ { SMT_P_VERSION, sizeof(struct smt_p_version) ,
+ SWAP_SMT_P_VERSION } ,
+#ifdef ESS
+ { SMT_P0015, sizeof(struct smt_p_0015) , SWAP_SMT_P0015 } ,
+ { SMT_P0016, sizeof(struct smt_p_0016) , SWAP_SMT_P0016 } ,
+ { SMT_P0017, sizeof(struct smt_p_0017) , SWAP_SMT_P0017 } ,
+ { SMT_P0018, sizeof(struct smt_p_0018) , SWAP_SMT_P0018 } ,
+ { SMT_P0019, sizeof(struct smt_p_0019) , SWAP_SMT_P0019 } ,
+ { SMT_P001A, sizeof(struct smt_p_001a) , SWAP_SMT_P001A } ,
+ { SMT_P001B, sizeof(struct smt_p_001b) , SWAP_SMT_P001B } ,
+ { SMT_P001C, sizeof(struct smt_p_001c) , SWAP_SMT_P001C } ,
+ { SMT_P001D, sizeof(struct smt_p_001d) , SWAP_SMT_P001D } ,
+#endif
+#if 0
+ { SMT_P_FSC, sizeof(struct smt_p_fsc) ,
+ SWAP_SMT_P_FSC } ,
+#endif
+
+ { SMT_P_SETCOUNT,0, SWAP_SMT_P_SETCOUNT } ,
+ { SMT_P1048, 0, SWAP_SMT_P1048 } ,
+ { SMT_P208C, 0, SWAP_SMT_P208C } ,
+ { SMT_P208D, 0, SWAP_SMT_P208D } ,
+ { SMT_P208E, 0, SWAP_SMT_P208E } ,
+ { SMT_P208F, 0, SWAP_SMT_P208F } ,
+ { SMT_P2090, 0, SWAP_SMT_P2090 } ,
+#ifdef ESS
+ { SMT_P320B, sizeof(struct smt_p_320b) , SWAP_SMT_P320B } ,
+ { SMT_P320F, sizeof(struct smt_p_320f) , SWAP_SMT_P320F } ,
+ { SMT_P3210, sizeof(struct smt_p_3210) , SWAP_SMT_P3210 } ,
+#endif
+ { SMT_P4050, 0, SWAP_SMT_P4050 } ,
+ { SMT_P4051, 0, SWAP_SMT_P4051 } ,
+ { SMT_P4052, 0, SWAP_SMT_P4052 } ,
+ { SMT_P4053, 0, SWAP_SMT_P4053 } ,
+} ;
+
+#define N_SMT_PLEN ARRAY_SIZE(smt_pdef)
+
+int smt_check_para(struct s_smc *smc, struct smt_header *sm,
+ const u_short list[])
+{
+ const u_short *p = list ;
+ while (*p) {
+ if (!sm_to_para(smc,sm,(int) *p)) {
+ DB_SMT("SMT: smt_check_para - missing para %x\n",*p,0);
+ return -1;
+ }
+ p++ ;
+ }
+ return 0;
+}
+
+void *sm_to_para(struct s_smc *smc, struct smt_header *sm, int para)
+{
+ char *p ;
+ int len ;
+ int plen ;
+ void *found = NULL;
+
+ SK_UNUSED(smc) ;
+
+ len = sm->smt_len ;
+ p = (char *)(sm+1) ; /* pointer to info */
+ while (len > 0 ) {
+ if (((struct smt_para *)p)->p_type == para)
+ found = (void *) p ;
+ plen = ((struct smt_para *)p)->p_len + PARA_LEN ;
+ p += plen ;
+ len -= plen ;
+ if (len < 0) {
+ DB_SMT("SMT : sm_to_para - length error %d\n",plen,0) ;
+ return NULL;
+ }
+ if ((plen & 3) && (para != SMT_P_ECHODATA)) {
+ DB_SMT("SMT : sm_to_para - odd length %d\n",plen,0) ;
+ return NULL;
+ }
+ if (found)
+ return found;
+ }
+ return NULL;
+}
+
+#if 0
+/*
+ * send ANTC data test frame
+ */
+void fddi_send_antc(struct s_smc *smc, struct fddi_addr *dest)
+{
+ SK_UNUSED(smc) ;
+ SK_UNUSED(dest) ;
+#if 0
+ SMbuf *mb ;
+ struct smt_header *smt ;
+ int i ;
+ char *p ;
+
+ mb = smt_get_mbuf() ;
+ mb->sm_len = 3000+12 ;
+ p = smtod(mb, char *) + 12 ;
+ for (i = 0 ; i < 3000 ; i++)
+ *p++ = 1 << (i&7) ;
+
+ smt = smtod(mb, struct smt_header *) ;
+ smt->smt_dest = *dest ;
+ smt->smt_source = smc->mib.m[MAC0].fddiMACSMTAddress ;
+ smt_send_mbuf(smc,mb,FC_ASYNC_LLC) ;
+#endif
+}
+#endif
+
+#ifdef DEBUG
+char *addr_to_string(struct fddi_addr *addr)
+{
+ int i ;
+ static char string[6*3] = "****" ;
+
+ for (i = 0 ; i < 6 ; i++) {
+ string[i * 3] = hex_asc_hi(addr->a[i]);
+ string[i * 3 + 1] = hex_asc_lo(addr->a[i]);
+ string[i * 3 + 2] = ':';
+ }
+ string[5 * 3 + 2] = 0;
+ return string;
+}
+#endif
+
+/*
+ * return static mac index
+ */
+static int mac_index(struct s_smc *smc, int mac)
+{
+ SK_UNUSED(mac) ;
+#ifdef CONCENTRATOR
+ SK_UNUSED(smc) ;
+ return NUMPHYS + 1;
+#else
+ return (smc->s.sas == SMT_SAS) ? 2 : 3;
+#endif
+}
+
+/*
+ * return static phy index
+ */
+static int phy_index(struct s_smc *smc, int phy)
+{
+ SK_UNUSED(smc) ;
+ return phy + 1;
+}
+
+/*
+ * return dynamic mac connection resource index
+ */
+static int mac_con_resource_index(struct s_smc *smc, int mac)
+{
+#ifdef CONCENTRATOR
+ SK_UNUSED(smc) ;
+ SK_UNUSED(mac) ;
+ return entity_to_index(smc, cem_get_downstream(smc, ENTITY_MAC));
+#else
+ SK_UNUSED(mac) ;
+ switch (smc->mib.fddiSMTCF_State) {
+ case SC9_C_WRAP_A :
+ case SC5_THRU_B :
+ case SC11_C_WRAP_S :
+ return 1;
+ case SC10_C_WRAP_B :
+ case SC4_THRU_A :
+ return 2;
+ }
+ return smc->s.sas == SMT_SAS ? 2 : 3;
+#endif
+}
+
+/*
+ * return dynamic phy connection resource index
+ */
+static int phy_con_resource_index(struct s_smc *smc, int phy)
+{
+#ifdef CONCENTRATOR
+ return entity_to_index(smc, cem_get_downstream(smc, ENTITY_PHY(phy))) ;
+#else
+ switch (smc->mib.fddiSMTCF_State) {
+ case SC9_C_WRAP_A :
+ return phy == PA ? 3 : 2;
+ case SC10_C_WRAP_B :
+ return phy == PA ? 1 : 3;
+ case SC4_THRU_A :
+ return phy == PA ? 3 : 1;
+ case SC5_THRU_B :
+ return phy == PA ? 2 : 3;
+ case SC11_C_WRAP_S :
+ return 2;
+ }
+ return phy;
+#endif
+}
+
+#ifdef CONCENTRATOR
+static int entity_to_index(struct s_smc *smc, int e)
+{
+ if (e == ENTITY_MAC)
+ return mac_index(smc, 1);
+ else
+ return phy_index(smc, e - ENTITY_PHY(0));
+}
+#endif
+
+#ifdef LITTLE_ENDIAN
+static int smt_swap_short(u_short s)
+{
+ return ((s>>8)&0xff) | ((s&0xff)<<8);
+}
+
+void smt_swap_para(struct smt_header *sm, int len, int direction)
+/* int direction; 0 encode 1 decode */
+{
+ struct smt_para *pa ;
+ const struct smt_pdef *pd ;
+ char *p ;
+ int plen ;
+ int type ;
+ int i ;
+
+/* printf("smt_swap_para sm %x len %d dir %d\n",
+ sm,len,direction) ;
+ */
+ smt_string_swap((char *)sm,SWAP_SMTHEADER,len) ;
+
+ /* swap args */
+ len -= sizeof(struct smt_header) ;
+
+ p = (char *) (sm + 1) ;
+ while (len > 0) {
+ pa = (struct smt_para *) p ;
+ plen = pa->p_len ;
+ type = pa->p_type ;
+ pa->p_type = smt_swap_short(pa->p_type) ;
+ pa->p_len = smt_swap_short(pa->p_len) ;
+ if (direction) {
+ plen = pa->p_len ;
+ type = pa->p_type ;
+ }
+ /*
+ * note: paras can have 0 length !
+ */
+ if (plen < 0)
+ break ;
+ plen += PARA_LEN ;
+ for (i = N_SMT_PLEN, pd = smt_pdef; i ; i--,pd++) {
+ if (pd->ptype == type)
+ break ;
+ }
+ if (i && pd->pswap) {
+ smt_string_swap(p+PARA_LEN,pd->pswap,len) ;
+ }
+ len -= plen ;
+ p += plen ;
+ }
+}
+
+static void smt_string_swap(char *data, const char *format, int len)
+{
+ const char *open_paren = NULL ;
+ int x ;
+
+ while (len > 0 && *format) {
+ switch (*format) {
+ case '[' :
+ open_paren = format ;
+ break ;
+ case ']' :
+ format = open_paren ;
+ break ;
+ case '1' :
+ case '2' :
+ case '3' :
+ case '4' :
+ case '5' :
+ case '6' :
+ case '7' :
+ case '8' :
+ case '9' :
+ data += *format - '0' ;
+ len -= *format - '0' ;
+ break ;
+ case 'c':
+ data++ ;
+ len-- ;
+ break ;
+ case 's' :
+ x = data[0] ;
+ data[0] = data[1] ;
+ data[1] = x ;
+ data += 2 ;
+ len -= 2 ;
+ break ;
+ case 'l' :
+ x = data[0] ;
+ data[0] = data[3] ;
+ data[3] = x ;
+ x = data[1] ;
+ data[1] = data[2] ;
+ data[2] = x ;
+ data += 4 ;
+ len -= 4 ;
+ break ;
+ }
+ format++ ;
+ }
+}
+#else
+void smt_swap_para(struct smt_header *sm, int len, int direction)
+/* int direction; 0 encode 1 decode */
+{
+ SK_UNUSED(sm) ;
+ SK_UNUSED(len) ;
+ SK_UNUSED(direction) ;
+}
+#endif
+
+/*
+ * PMF actions
+ */
+int smt_action(struct s_smc *smc, int class, int code, int index)
+{
+ int event ;
+ int port ;
+ DB_SMT("SMT: action %d code %d\n",class,code) ;
+ switch(class) {
+ case SMT_STATION_ACTION :
+ switch(code) {
+ case SMT_STATION_ACTION_CONNECT :
+ smc->mib.fddiSMTRemoteDisconnectFlag = FALSE ;
+ queue_event(smc,EVENT_ECM,EC_CONNECT) ;
+ break ;
+ case SMT_STATION_ACTION_DISCONNECT :
+ queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+ smc->mib.fddiSMTRemoteDisconnectFlag = TRUE ;
+ RS_SET(smc,RS_DISCONNECT) ;
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+ FDDI_SMT_EVENT, (u_long) FDDI_REMOTE_DISCONNECT,
+ smt_get_event_word(smc));
+ break ;
+ case SMT_STATION_ACTION_PATHTEST :
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+ FDDI_SMT_EVENT, (u_long) FDDI_PATH_TEST,
+ smt_get_event_word(smc));
+ break ;
+ case SMT_STATION_ACTION_SELFTEST :
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+ FDDI_SMT_EVENT, (u_long) FDDI_REMOTE_SELF_TEST,
+ smt_get_event_word(smc));
+ break ;
+ case SMT_STATION_ACTION_DISABLE_A :
+ if (smc->y[PA].pc_mode == PM_PEER) {
+ RS_SET(smc,RS_EVENT) ;
+ queue_event(smc,EVENT_PCM+PA,PC_DISABLE) ;
+ }
+ break ;
+ case SMT_STATION_ACTION_DISABLE_B :
+ if (smc->y[PB].pc_mode == PM_PEER) {
+ RS_SET(smc,RS_EVENT) ;
+ queue_event(smc,EVENT_PCM+PB,PC_DISABLE) ;
+ }
+ break ;
+ case SMT_STATION_ACTION_DISABLE_M :
+ for (port = 0 ; port < NUMPHYS ; port++) {
+ if (smc->mib.p[port].fddiPORTMy_Type != TM)
+ continue ;
+ RS_SET(smc,RS_EVENT) ;
+ queue_event(smc,EVENT_PCM+port,PC_DISABLE) ;
+ }
+ break ;
+ default :
+ return 1;
+ }
+ break ;
+ case SMT_PORT_ACTION :
+ switch(code) {
+ case SMT_PORT_ACTION_ENABLE :
+ event = PC_ENABLE ;
+ break ;
+ case SMT_PORT_ACTION_DISABLE :
+ event = PC_DISABLE ;
+ break ;
+ case SMT_PORT_ACTION_MAINT :
+ event = PC_MAINT ;
+ break ;
+ case SMT_PORT_ACTION_START :
+ event = PC_START ;
+ break ;
+ case SMT_PORT_ACTION_STOP :
+ event = PC_STOP ;
+ break ;
+ default :
+ return 1;
+ }
+ queue_event(smc,EVENT_PCM+index,event) ;
+ break ;
+ default :
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * canonical conversion of <len> bytes beginning form *data
+ */
+#ifdef USE_CAN_ADDR
+static void hwm_conv_can(struct s_smc *smc, char *data, int len)
+{
+ int i ;
+
+ SK_UNUSED(smc) ;
+
+ for (i = len; i ; i--, data++)
+ *data = bitrev8(*data);
+}
+#endif
+
+#endif /* no SLIM_SMT */
+
diff --git a/drivers/net/fddi/skfp/smtdef.c b/drivers/net/fddi/skfp/smtdef.c
new file mode 100644
index 000000000..1acab0b36
--- /dev/null
+++ b/drivers/net/fddi/skfp/smtdef.c
@@ -0,0 +1,355 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ SMT/CMT defaults
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef OEM_USER_DATA
+#define OEM_USER_DATA "SK-NET FDDI V2.0 Userdata"
+#endif
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)smtdef.c 2.53 99/08/11 (C) SK " ;
+#endif
+
+/*
+ * defaults
+ */
+#define TTMS(x) ((u_long)(x)*1000L)
+#define TTS(x) ((u_long)(x)*1000000L)
+#define TTUS(x) ((u_long)(x))
+
+#define DEFAULT_TB_MIN TTMS(5)
+#define DEFAULT_TB_MAX TTMS(50)
+#define DEFAULT_C_MIN TTUS(1600)
+#define DEFAULT_T_OUT TTMS(100+5)
+#define DEFAULT_TL_MIN TTUS(30)
+#define DEFAULT_LC_SHORT TTMS(50+5)
+#define DEFAULT_LC_MEDIUM TTMS(500+20)
+#define DEFAULT_LC_LONG TTS(5)+TTMS(50)
+#define DEFAULT_LC_EXTENDED TTS(50)+TTMS(50)
+#define DEFAULT_T_NEXT_9 TTMS(200+10)
+#define DEFAULT_NS_MAX TTUS(1310)
+#define DEFAULT_I_MAX TTMS(25)
+#define DEFAULT_IN_MAX TTMS(40)
+#define DEFAULT_TD_MIN TTMS(5)
+#define DEFAULT_T_NON_OP TTS(1)
+#define DEFAULT_T_STUCK TTS(8)
+#define DEFAULT_T_DIRECT TTMS(370)
+#define DEFAULT_T_JAM TTMS(370)
+#define DEFAULT_T_ANNOUNCE TTMS(2500)
+#define DEFAULT_D_MAX TTUS(1617)
+#define DEFAULT_LEM_ALARM (8)
+#define DEFAULT_LEM_CUTOFF (7)
+#define DEFAULT_TEST_DONE TTS(1)
+#define DEFAULT_CHECK_POLL TTS(1)
+#define DEFAULT_POLL TTMS(50)
+
+/*
+ * LCT errors threshold
+ */
+#define DEFAULT_LCT_SHORT 1
+#define DEFAULT_LCT_MEDIUM 3
+#define DEFAULT_LCT_LONG 5
+#define DEFAULT_LCT_EXTEND 50
+
+/* Forward declarations */
+void smt_reset_defaults(struct s_smc *smc, int level);
+static void smt_init_mib(struct s_smc *smc, int level);
+static int set_min_max(int maxflag, u_long mib, u_long limit, u_long *oper);
+
+#define MS2BCLK(x) ((x)*12500L)
+#define US2BCLK(x) ((x)*1250L)
+
+void smt_reset_defaults(struct s_smc *smc, int level)
+{
+ struct smt_config *smt ;
+ int i ;
+ u_long smt_boot_time;
+
+
+ smt_init_mib(smc,level) ;
+
+ smc->os.smc_version = SMC_VERSION ;
+ smt_boot_time = smt_get_time();
+ for( i = 0; i < NUMMACS; i++ )
+ smc->sm.last_tok_time[i] = smt_boot_time ;
+ smt = &smc->s ;
+ smt->attach_s = 0 ;
+ smt->build_ring_map = 1 ;
+ smt->sas = SMT_DAS ;
+ smt->numphys = NUMPHYS ;
+ smt->pcm_tb_min = DEFAULT_TB_MIN ;
+ smt->pcm_tb_max = DEFAULT_TB_MAX ;
+ smt->pcm_c_min = DEFAULT_C_MIN ;
+ smt->pcm_t_out = DEFAULT_T_OUT ;
+ smt->pcm_tl_min = DEFAULT_TL_MIN ;
+ smt->pcm_lc_short = DEFAULT_LC_SHORT ;
+ smt->pcm_lc_medium = DEFAULT_LC_MEDIUM ;
+ smt->pcm_lc_long = DEFAULT_LC_LONG ;
+ smt->pcm_lc_extended = DEFAULT_LC_EXTENDED ;
+ smt->pcm_t_next_9 = DEFAULT_T_NEXT_9 ;
+ smt->pcm_ns_max = DEFAULT_NS_MAX ;
+ smt->ecm_i_max = DEFAULT_I_MAX ;
+ smt->ecm_in_max = DEFAULT_IN_MAX ;
+ smt->ecm_td_min = DEFAULT_TD_MIN ;
+ smt->ecm_test_done = DEFAULT_TEST_DONE ;
+ smt->ecm_check_poll = DEFAULT_CHECK_POLL ;
+ smt->rmt_t_non_op = DEFAULT_T_NON_OP ;
+ smt->rmt_t_stuck = DEFAULT_T_STUCK ;
+ smt->rmt_t_direct = DEFAULT_T_DIRECT ;
+ smt->rmt_t_jam = DEFAULT_T_JAM ;
+ smt->rmt_t_announce = DEFAULT_T_ANNOUNCE ;
+ smt->rmt_t_poll = DEFAULT_POLL ;
+ smt->rmt_dup_mac_behavior = FALSE ; /* See Struct smt_config */
+ smt->mac_d_max = DEFAULT_D_MAX ;
+
+ smt->lct_short = DEFAULT_LCT_SHORT ;
+ smt->lct_medium = DEFAULT_LCT_MEDIUM ;
+ smt->lct_long = DEFAULT_LCT_LONG ;
+ smt->lct_extended = DEFAULT_LCT_EXTEND ;
+
+#ifndef SLIM_SMT
+#ifdef ESS
+ if (level == 0) {
+ smc->ess.sync_bw_available = FALSE ;
+ smc->mib.fddiESSPayload = 0 ;
+ smc->mib.fddiESSOverhead = 0 ;
+ smc->mib.fddiESSMaxTNeg = (u_long)(- MS2BCLK(25)) ;
+ smc->mib.fddiESSMinSegmentSize = 1 ;
+ smc->mib.fddiESSCategory = SB_STATIC ;
+ smc->mib.fddiESSSynchTxMode = FALSE ;
+ smc->ess.raf_act_timer_poll = FALSE ;
+ smc->ess.timer_count = 7 ; /* first RAF alc req after 3s */
+ }
+ smc->ess.local_sba_active = FALSE ;
+ smc->ess.sba_reply_pend = NULL ;
+#endif
+#ifdef SBA
+ smt_init_sba(smc,level) ;
+#endif
+#endif /* no SLIM_SMT */
+#ifdef TAG_MODE
+ if (level == 0) {
+ smc->hw.pci_fix_value = 0 ;
+ }
+#endif
+}
+
+/*
+ * manufacturer data
+ */
+static const char man_data[32] =
+/* 01234567890123456789012345678901 */
+ "xxxSK-NET FDDI SMT 7.3 - V2.8.8" ;
+
+static void smt_init_mib(struct s_smc *smc, int level)
+{
+ struct fddi_mib *mib ;
+ struct fddi_mib_p *pm ;
+ int port ;
+ int path ;
+
+ mib = &smc->mib ;
+ if (level == 0) {
+ /*
+ * set EVERYTHING to ZERO
+ * EXCEPT hw and os
+ */
+ memset(((char *)smc)+
+ sizeof(struct s_smt_os)+sizeof(struct s_smt_hw), 0,
+ sizeof(struct s_smc) -
+ sizeof(struct s_smt_os) - sizeof(struct s_smt_hw)) ;
+ }
+ else {
+ mib->fddiSMTRemoteDisconnectFlag = 0 ;
+ mib->fddiSMTPeerWrapFlag = 0 ;
+ }
+
+ mib->fddiSMTOpVersionId = 2 ;
+ mib->fddiSMTHiVersionId = 2 ;
+ mib->fddiSMTLoVersionId = 2 ;
+ memcpy((char *) mib->fddiSMTManufacturerData,man_data,32) ;
+ if (level == 0) {
+ strcpy(mib->fddiSMTUserData,OEM_USER_DATA) ;
+ }
+ mib->fddiSMTMIBVersionId = 1 ;
+ mib->fddiSMTMac_Ct = NUMMACS ;
+ mib->fddiSMTConnectionPolicy = POLICY_MM | POLICY_AA | POLICY_BB ;
+
+ /*
+ * fddiSMTNonMaster_Ct and fddiSMTMaster_Ct are set in smt_fixup_mib
+ * s.sas is not set yet (is set in init driver)
+ */
+ mib->fddiSMTAvailablePaths = MIB_PATH_P | MIB_PATH_S ;
+
+ mib->fddiSMTConfigCapabilities = 0 ; /* no hold,no wrap_ab*/
+ mib->fddiSMTTT_Notify = 10 ;
+ mib->fddiSMTStatRptPolicy = TRUE ;
+ mib->fddiSMTTrace_MaxExpiration = SEC2MIB(7) ;
+ mib->fddiSMTMACIndexes = INDEX_MAC ;
+ mib->fddiSMTStationStatus = MIB_SMT_STASTA_SEPA ; /* separated */
+
+ mib->m[MAC0].fddiMACIndex = INDEX_MAC ;
+ mib->m[MAC0].fddiMACFrameStatusFunctions = FSC_TYPE0 ;
+ mib->m[MAC0].fddiMACRequestedPaths =
+ MIB_P_PATH_LOCAL |
+ MIB_P_PATH_SEC_ALTER |
+ MIB_P_PATH_PRIM_ALTER ;
+ mib->m[MAC0].fddiMACAvailablePaths = MIB_PATH_P ;
+ mib->m[MAC0].fddiMACCurrentPath = MIB_PATH_PRIMARY ;
+ mib->m[MAC0].fddiMACT_MaxCapabilitiy = (u_long)(- MS2BCLK(165)) ;
+ mib->m[MAC0].fddiMACTVXCapabilitiy = (u_long)(- US2BCLK(52)) ;
+ if (level == 0) {
+ mib->m[MAC0].fddiMACTvxValue = (u_long)(- US2BCLK(27)) ;
+ mib->m[MAC0].fddiMACTvxValueMIB = (u_long)(- US2BCLK(27)) ;
+ mib->m[MAC0].fddiMACT_Req = (u_long)(- MS2BCLK(165)) ;
+ mib->m[MAC0].fddiMACT_ReqMIB = (u_long)(- MS2BCLK(165)) ;
+ mib->m[MAC0].fddiMACT_Max = (u_long)(- MS2BCLK(165)) ;
+ mib->m[MAC0].fddiMACT_MaxMIB = (u_long)(- MS2BCLK(165)) ;
+ mib->m[MAC0].fddiMACT_Min = (u_long)(- MS2BCLK(4)) ;
+ }
+ mib->m[MAC0].fddiMACHardwarePresent = TRUE ;
+ mib->m[MAC0].fddiMACMA_UnitdataEnable = TRUE ;
+ mib->m[MAC0].fddiMACFrameErrorThreshold = 1 ;
+ mib->m[MAC0].fddiMACNotCopiedThreshold = 1 ;
+ /*
+ * Path attributes
+ */
+ for (path = 0 ; path < NUMPATHS ; path++) {
+ mib->a[path].fddiPATHIndex = INDEX_PATH + path ;
+ if (level == 0) {
+ mib->a[path].fddiPATHTVXLowerBound =
+ (u_long)(- US2BCLK(27)) ;
+ mib->a[path].fddiPATHT_MaxLowerBound =
+ (u_long)(- MS2BCLK(165)) ;
+ mib->a[path].fddiPATHMaxT_Req =
+ (u_long)(- MS2BCLK(165)) ;
+ }
+ }
+
+
+ /*
+ * Port attributes
+ */
+ pm = mib->p ;
+ for (port = 0 ; port < NUMPHYS ; port++) {
+ /*
+ * set MIB pointer in phy
+ */
+ /* Attention: don't initialize mib pointer here! */
+ /* It must be initialized during phase 2 */
+ smc->y[port].mib = NULL;
+ mib->fddiSMTPORTIndexes[port] = port+INDEX_PORT ;
+
+ pm->fddiPORTIndex = port+INDEX_PORT ;
+ pm->fddiPORTHardwarePresent = TRUE ;
+ if (level == 0) {
+ pm->fddiPORTLer_Alarm = DEFAULT_LEM_ALARM ;
+ pm->fddiPORTLer_Cutoff = DEFAULT_LEM_CUTOFF ;
+ }
+ /*
+ * fddiPORTRequestedPaths are set in pcmplc.c
+ * we don't know the port type yet !
+ */
+ pm->fddiPORTRequestedPaths[1] = 0 ;
+ pm->fddiPORTRequestedPaths[2] = 0 ;
+ pm->fddiPORTRequestedPaths[3] = 0 ;
+ pm->fddiPORTAvailablePaths = MIB_PATH_P ;
+ pm->fddiPORTPMDClass = MIB_PMDCLASS_MULTI ;
+ pm++ ;
+ }
+
+ (void) smt_set_mac_opvalues(smc) ;
+}
+
+int smt_set_mac_opvalues(struct s_smc *smc)
+{
+ int st ;
+ int st2 ;
+
+ st = set_min_max(1,smc->mib.m[MAC0].fddiMACTvxValueMIB,
+ smc->mib.a[PATH0].fddiPATHTVXLowerBound,
+ &smc->mib.m[MAC0].fddiMACTvxValue) ;
+ st |= set_min_max(0,smc->mib.m[MAC0].fddiMACT_MaxMIB,
+ smc->mib.a[PATH0].fddiPATHT_MaxLowerBound,
+ &smc->mib.m[MAC0].fddiMACT_Max) ;
+ st |= (st2 = set_min_max(0,smc->mib.m[MAC0].fddiMACT_ReqMIB,
+ smc->mib.a[PATH0].fddiPATHMaxT_Req,
+ &smc->mib.m[MAC0].fddiMACT_Req)) ;
+ if (st2) {
+ /* Treq attribute changed remotely. So send an AIX_EVENT to the
+ * user
+ */
+ AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+ FDDI_SMT_EVENT, (u_long) FDDI_REMOTE_T_REQ,
+ smt_get_event_word(smc));
+ }
+ return st;
+}
+
+void smt_fixup_mib(struct s_smc *smc)
+{
+#ifdef CONCENTRATOR
+ switch (smc->s.sas) {
+ case SMT_SAS :
+ smc->mib.fddiSMTNonMaster_Ct = 1 ;
+ break ;
+ case SMT_DAS :
+ smc->mib.fddiSMTNonMaster_Ct = 2 ;
+ break ;
+ case SMT_NAC :
+ smc->mib.fddiSMTNonMaster_Ct = 0 ;
+ break ;
+ }
+ smc->mib.fddiSMTMaster_Ct = NUMPHYS - smc->mib.fddiSMTNonMaster_Ct ;
+#else
+ switch (smc->s.sas) {
+ case SMT_SAS :
+ smc->mib.fddiSMTNonMaster_Ct = 1 ;
+ break ;
+ case SMT_DAS :
+ smc->mib.fddiSMTNonMaster_Ct = 2 ;
+ break ;
+ }
+ smc->mib.fddiSMTMaster_Ct = 0 ;
+#endif
+}
+
+/*
+ * determine new setting for operational value
+ * if limit is lower than mib
+ * use limit
+ * else
+ * use mib
+ * NOTE : numbers are negative, negate comparison !
+ */
+static int set_min_max(int maxflag, u_long mib, u_long limit, u_long *oper)
+{
+ u_long old ;
+ old = *oper ;
+ if ((limit > mib) ^ maxflag)
+ *oper = limit ;
+ else
+ *oper = mib ;
+ return old != *oper;
+}
+
diff --git a/drivers/net/fddi/skfp/smtinit.c b/drivers/net/fddi/skfp/smtinit.c
new file mode 100644
index 000000000..e3a0c0bc2
--- /dev/null
+++ b/drivers/net/fddi/skfp/smtinit.c
@@ -0,0 +1,125 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ Init SMT
+ call all module level initialization routines
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)smtinit.c 1.15 97/05/06 (C) SK " ;
+#endif
+
+void init_fddi_driver(struct s_smc *smc, u_char *mac_addr);
+
+/* define global debug variable */
+#if defined(DEBUG) && !defined(DEBUG_BRD)
+struct smt_debug debug;
+#endif
+
+#ifndef MULT_OEM
+#define OEMID(smc,i) oem_id[i]
+ extern u_char oem_id[] ;
+#else /* MULT_OEM */
+#define OEMID(smc,i) smc->hw.oem_id->oi_mark[i]
+ extern struct s_oem_ids oem_ids[] ;
+#endif /* MULT_OEM */
+
+/*
+ * Set OEM specific values
+ *
+ * Can not be called in smt_reset_defaults, because it is not sure that
+ * the OEM ID is already defined.
+ */
+static void set_oem_spec_val(struct s_smc *smc)
+{
+ struct fddi_mib *mib ;
+
+ mib = &smc->mib ;
+
+ /*
+ * set IBM specific values
+ */
+ if (OEMID(smc,0) == 'I') {
+ mib->fddiSMTConnectionPolicy = POLICY_MM ;
+ }
+}
+
+/*
+ * Init SMT
+ */
+int init_smt(struct s_smc *smc, u_char *mac_addr)
+/* u_char *mac_addr; canonical address or NULL */
+{
+ int p ;
+
+#if defined(DEBUG) && !defined(DEBUG_BRD)
+ debug.d_smt = 0 ;
+ debug.d_smtf = 0 ;
+ debug.d_rmt = 0 ;
+ debug.d_ecm = 0 ;
+ debug.d_pcm = 0 ;
+ debug.d_cfm = 0 ;
+
+ debug.d_plc = 0 ;
+#ifdef ESS
+ debug.d_ess = 0 ;
+#endif
+#ifdef SBA
+ debug.d_sba = 0 ;
+#endif
+#endif /* DEBUG && !DEBUG_BRD */
+
+ /* First initialize the ports mib->pointers */
+ for ( p = 0; p < NUMPHYS; p ++ ) {
+ smc->y[p].mib = & smc->mib.p[p] ;
+ }
+
+ set_oem_spec_val(smc) ;
+ (void) smt_set_mac_opvalues(smc) ;
+ init_fddi_driver(smc,mac_addr) ; /* HW driver */
+ smt_fixup_mib(smc) ; /* update values that depend on s.sas */
+
+ ev_init(smc) ; /* event queue */
+#ifndef SLIM_SMT
+ smt_init_evc(smc) ; /* evcs in MIB */
+#endif /* no SLIM_SMT */
+ smt_timer_init(smc) ; /* timer package */
+ smt_agent_init(smc) ; /* SMT frame manager */
+
+ pcm_init(smc) ; /* PCM state machine */
+ ecm_init(smc) ; /* ECM state machine */
+ cfm_init(smc) ; /* CFM state machine */
+ rmt_init(smc) ; /* RMT state machine */
+
+ for (p = 0 ; p < NUMPHYS ; p++) {
+ pcm(smc,p,0) ; /* PCM A state machine */
+ }
+ ecm(smc,0) ; /* ECM state machine */
+ cfm(smc,0) ; /* CFM state machine */
+ rmt(smc,0) ; /* RMT state machine */
+
+ smt_agent_task(smc) ; /* NIF FSM etc */
+
+ PNMI_INIT(smc) ; /* PNMI initialization */
+
+ return 0;
+}
+
diff --git a/drivers/net/fddi/skfp/smttimer.c b/drivers/net/fddi/skfp/smttimer.c
new file mode 100644
index 000000000..531795e98
--- /dev/null
+++ b/drivers/net/fddi/skfp/smttimer.c
@@ -0,0 +1,156 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ SMT timer
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)smttimer.c 2.4 97/08/04 (C) SK " ;
+#endif
+
+static void timer_done(struct s_smc *smc, int restart);
+
+void smt_timer_init(struct s_smc *smc)
+{
+ smc->t.st_queue = NULL;
+ smc->t.st_fast.tm_active = FALSE ;
+ smc->t.st_fast.tm_next = NULL;
+ hwt_init(smc) ;
+}
+
+void smt_timer_stop(struct s_smc *smc, struct smt_timer *timer)
+{
+ struct smt_timer **prev ;
+ struct smt_timer *tm ;
+
+ /*
+ * remove timer from queue
+ */
+ timer->tm_active = FALSE ;
+ if (smc->t.st_queue == timer && !timer->tm_next) {
+ hwt_stop(smc) ;
+ }
+ for (prev = &smc->t.st_queue ; (tm = *prev) ; prev = &tm->tm_next ) {
+ if (tm == timer) {
+ *prev = tm->tm_next ;
+ if (tm->tm_next) {
+ tm->tm_next->tm_delta += tm->tm_delta ;
+ }
+ return ;
+ }
+ }
+}
+
+void smt_timer_start(struct s_smc *smc, struct smt_timer *timer, u_long time,
+ u_long token)
+{
+ struct smt_timer **prev ;
+ struct smt_timer *tm ;
+ u_long delta = 0 ;
+
+ time /= 16 ; /* input is uS, clock ticks are 16uS */
+ if (!time)
+ time = 1 ;
+ smt_timer_stop(smc,timer) ;
+ timer->tm_smc = smc ;
+ timer->tm_token = token ;
+ timer->tm_active = TRUE ;
+ if (!smc->t.st_queue) {
+ smc->t.st_queue = timer ;
+ timer->tm_next = NULL;
+ timer->tm_delta = time ;
+ hwt_start(smc,time) ;
+ return ;
+ }
+ /*
+ * timer correction
+ */
+ timer_done(smc,0) ;
+
+ /*
+ * find position in queue
+ */
+ delta = 0 ;
+ for (prev = &smc->t.st_queue ; (tm = *prev) ; prev = &tm->tm_next ) {
+ if (delta + tm->tm_delta > time) {
+ break ;
+ }
+ delta += tm->tm_delta ;
+ }
+ /* insert in queue */
+ *prev = timer ;
+ timer->tm_next = tm ;
+ timer->tm_delta = time - delta ;
+ if (tm)
+ tm->tm_delta -= timer->tm_delta ;
+ /*
+ * start new with first
+ */
+ hwt_start(smc,smc->t.st_queue->tm_delta) ;
+}
+
+void smt_force_irq(struct s_smc *smc)
+{
+ smt_timer_start(smc,&smc->t.st_fast,32L, EV_TOKEN(EVENT_SMT,SM_FAST));
+}
+
+void smt_timer_done(struct s_smc *smc)
+{
+ timer_done(smc,1) ;
+}
+
+static void timer_done(struct s_smc *smc, int restart)
+{
+ u_long delta ;
+ struct smt_timer *tm ;
+ struct smt_timer *next ;
+ struct smt_timer **last ;
+ int done = 0 ;
+
+ delta = hwt_read(smc) ;
+ last = &smc->t.st_queue ;
+ tm = smc->t.st_queue ;
+ while (tm && !done) {
+ if (delta >= tm->tm_delta) {
+ tm->tm_active = FALSE ;
+ delta -= tm->tm_delta ;
+ last = &tm->tm_next ;
+ tm = tm->tm_next ;
+ }
+ else {
+ tm->tm_delta -= delta ;
+ delta = 0 ;
+ done = 1 ;
+ }
+ }
+ *last = NULL;
+ next = smc->t.st_queue ;
+ smc->t.st_queue = tm ;
+
+ for ( tm = next ; tm ; tm = next) {
+ next = tm->tm_next ;
+ timer_event(smc,tm->tm_token) ;
+ }
+
+ if (restart && smc->t.st_queue)
+ hwt_start(smc,smc->t.st_queue->tm_delta) ;
+}
+
diff --git a/drivers/net/fddi/skfp/srf.c b/drivers/net/fddi/skfp/srf.c
new file mode 100644
index 000000000..cc27dea34
--- /dev/null
+++ b/drivers/net/fddi/skfp/srf.c
@@ -0,0 +1,429 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ SMT 7.2 Status Response Frame Implementation
+ SRF state machine and frame generation
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef SLIM_SMT
+#ifndef BOOT
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)srf.c 1.18 97/08/04 (C) SK " ;
+#endif
+
+
+/*
+ * function declarations
+ */
+static void clear_all_rep(struct s_smc *smc);
+static void clear_reported(struct s_smc *smc);
+static void smt_send_srf(struct s_smc *smc);
+static struct s_srf_evc *smt_get_evc(struct s_smc *smc, int code, int index);
+
+#define MAX_EVCS ARRAY_SIZE(smc->evcs)
+
+struct evc_init {
+ u_char code ;
+ u_char index ;
+ u_char n ;
+ u_short para ;
+} ;
+
+static const struct evc_init evc_inits[] = {
+ { SMT_COND_SMT_PEER_WRAP, 0,1,SMT_P1048 } ,
+
+ { SMT_COND_MAC_DUP_ADDR, INDEX_MAC, NUMMACS,SMT_P208C } ,
+ { SMT_COND_MAC_FRAME_ERROR, INDEX_MAC, NUMMACS,SMT_P208D } ,
+ { SMT_COND_MAC_NOT_COPIED, INDEX_MAC, NUMMACS,SMT_P208E } ,
+ { SMT_EVENT_MAC_NEIGHBOR_CHANGE, INDEX_MAC, NUMMACS,SMT_P208F } ,
+ { SMT_EVENT_MAC_PATH_CHANGE, INDEX_MAC, NUMMACS,SMT_P2090 } ,
+
+ { SMT_COND_PORT_LER, INDEX_PORT,NUMPHYS,SMT_P4050 } ,
+ { SMT_COND_PORT_EB_ERROR, INDEX_PORT,NUMPHYS,SMT_P4052 } ,
+ { SMT_EVENT_PORT_CONNECTION, INDEX_PORT,NUMPHYS,SMT_P4051 } ,
+ { SMT_EVENT_PORT_PATH_CHANGE, INDEX_PORT,NUMPHYS,SMT_P4053 } ,
+} ;
+
+#define MAX_INIT_EVC ARRAY_SIZE(evc_inits)
+
+void smt_init_evc(struct s_smc *smc)
+{
+ struct s_srf_evc *evc ;
+ const struct evc_init *init ;
+ unsigned int i ;
+ int index ;
+ int offset ;
+
+ static u_char fail_safe = FALSE ;
+
+ memset((char *)smc->evcs,0,sizeof(smc->evcs)) ;
+
+ evc = smc->evcs ;
+ init = evc_inits ;
+
+ for (i = 0 ; i < MAX_INIT_EVC ; i++) {
+ for (index = 0 ; index < init->n ; index++) {
+ evc->evc_code = init->code ;
+ evc->evc_para = init->para ;
+ evc->evc_index = init->index + index ;
+#ifndef DEBUG
+ evc->evc_multiple = &fail_safe ;
+ evc->evc_cond_state = &fail_safe ;
+#endif
+ evc++ ;
+ }
+ init++ ;
+ }
+
+ if ((unsigned int) (evc - smc->evcs) > MAX_EVCS) {
+ SMT_PANIC(smc,SMT_E0127, SMT_E0127_MSG) ;
+ }
+
+ /*
+ * conditions
+ */
+ smc->evcs[0].evc_cond_state = &smc->mib.fddiSMTPeerWrapFlag ;
+ smc->evcs[1].evc_cond_state =
+ &smc->mib.m[MAC0].fddiMACDuplicateAddressCond ;
+ smc->evcs[2].evc_cond_state =
+ &smc->mib.m[MAC0].fddiMACFrameErrorFlag ;
+ smc->evcs[3].evc_cond_state =
+ &smc->mib.m[MAC0].fddiMACNotCopiedFlag ;
+
+ /*
+ * events
+ */
+ smc->evcs[4].evc_multiple = &smc->mib.m[MAC0].fddiMACMultiple_N ;
+ smc->evcs[5].evc_multiple = &smc->mib.m[MAC0].fddiMACMultiple_P ;
+
+ offset = 6 ;
+ for (i = 0 ; i < NUMPHYS ; i++) {
+ /*
+ * conditions
+ */
+ smc->evcs[offset + 0*NUMPHYS].evc_cond_state =
+ &smc->mib.p[i].fddiPORTLerFlag ;
+ smc->evcs[offset + 1*NUMPHYS].evc_cond_state =
+ &smc->mib.p[i].fddiPORTEB_Condition ;
+
+ /*
+ * events
+ */
+ smc->evcs[offset + 2*NUMPHYS].evc_multiple =
+ &smc->mib.p[i].fddiPORTMultiple_U ;
+ smc->evcs[offset + 3*NUMPHYS].evc_multiple =
+ &smc->mib.p[i].fddiPORTMultiple_P ;
+ offset++ ;
+ }
+#ifdef DEBUG
+ for (i = 0, evc = smc->evcs ; i < MAX_EVCS ; i++, evc++) {
+ if (SMT_IS_CONDITION(evc->evc_code)) {
+ if (!evc->evc_cond_state) {
+ SMT_PANIC(smc,SMT_E0128, SMT_E0128_MSG) ;
+ }
+ evc->evc_multiple = &fail_safe ;
+ }
+ else {
+ if (!evc->evc_multiple) {
+ SMT_PANIC(smc,SMT_E0129, SMT_E0129_MSG) ;
+ }
+ evc->evc_cond_state = &fail_safe ;
+ }
+ }
+#endif
+ smc->srf.TSR = smt_get_time() ;
+ smc->srf.sr_state = SR0_WAIT ;
+}
+
+static struct s_srf_evc *smt_get_evc(struct s_smc *smc, int code, int index)
+{
+ unsigned int i ;
+ struct s_srf_evc *evc ;
+
+ for (i = 0, evc = smc->evcs ; i < MAX_EVCS ; i++, evc++) {
+ if (evc->evc_code == code && evc->evc_index == index)
+ return evc;
+ }
+ return NULL;
+}
+
+#define THRESHOLD_2 (2*TICKS_PER_SECOND)
+#define THRESHOLD_32 (32*TICKS_PER_SECOND)
+
+#ifdef DEBUG
+static const char * const srf_names[] = {
+ "None","MACPathChangeEvent", "MACNeighborChangeEvent",
+ "PORTPathChangeEvent", "PORTUndesiredConnectionAttemptEvent",
+ "SMTPeerWrapCondition", "SMTHoldCondition",
+ "MACFrameErrorCondition", "MACDuplicateAddressCondition",
+ "MACNotCopiedCondition", "PORTEBErrorCondition",
+ "PORTLerCondition"
+} ;
+#endif
+
+void smt_srf_event(struct s_smc *smc, int code, int index, int cond)
+{
+ struct s_srf_evc *evc ;
+ int cond_asserted = 0 ;
+ int cond_deasserted = 0 ;
+ int event_occurred = 0 ;
+ int tsr ;
+ int T_Limit = 2*TICKS_PER_SECOND ;
+
+ if (code == SMT_COND_MAC_DUP_ADDR && cond) {
+ RS_SET(smc,RS_DUPADDR) ;
+ }
+
+ if (code) {
+ DB_SMT("SRF: %s index %d\n",srf_names[code],index) ;
+
+ if (!(evc = smt_get_evc(smc,code,index))) {
+ DB_SMT("SRF : smt_get_evc() failed\n",0,0) ;
+ return ;
+ }
+ /*
+ * ignore condition if no change
+ */
+ if (SMT_IS_CONDITION(code)) {
+ if (*evc->evc_cond_state == cond)
+ return ;
+ }
+
+ /*
+ * set transition time stamp
+ */
+ smt_set_timestamp(smc,smc->mib.fddiSMTTransitionTimeStamp) ;
+ if (SMT_IS_CONDITION(code)) {
+ DB_SMT("SRF: condition is %s\n",cond ? "ON":"OFF",0) ;
+ if (cond) {
+ *evc->evc_cond_state = TRUE ;
+ evc->evc_rep_required = TRUE ;
+ smc->srf.any_report = TRUE ;
+ cond_asserted = TRUE ;
+ }
+ else {
+ *evc->evc_cond_state = FALSE ;
+ cond_deasserted = TRUE ;
+ }
+ }
+ else {
+ if (evc->evc_rep_required) {
+ *evc->evc_multiple = TRUE ;
+ }
+ else {
+ evc->evc_rep_required = TRUE ;
+ *evc->evc_multiple = FALSE ;
+ }
+ smc->srf.any_report = TRUE ;
+ event_occurred = TRUE ;
+ }
+#ifdef FDDI_MIB
+ snmp_srf_event(smc,evc) ;
+#endif /* FDDI_MIB */
+ }
+ tsr = smt_get_time() - smc->srf.TSR ;
+
+ switch (smc->srf.sr_state) {
+ case SR0_WAIT :
+ /* SR01a */
+ if (cond_asserted && tsr < T_Limit) {
+ smc->srf.SRThreshold = THRESHOLD_2 ;
+ smc->srf.sr_state = SR1_HOLDOFF ;
+ break ;
+ }
+ /* SR01b */
+ if (cond_deasserted && tsr < T_Limit) {
+ smc->srf.sr_state = SR1_HOLDOFF ;
+ break ;
+ }
+ /* SR01c */
+ if (event_occurred && tsr < T_Limit) {
+ smc->srf.sr_state = SR1_HOLDOFF ;
+ break ;
+ }
+ /* SR00b */
+ if (cond_asserted && tsr >= T_Limit) {
+ smc->srf.SRThreshold = THRESHOLD_2 ;
+ smc->srf.TSR = smt_get_time() ;
+ smt_send_srf(smc) ;
+ break ;
+ }
+ /* SR00c */
+ if (cond_deasserted && tsr >= T_Limit) {
+ smc->srf.TSR = smt_get_time() ;
+ smt_send_srf(smc) ;
+ break ;
+ }
+ /* SR00d */
+ if (event_occurred && tsr >= T_Limit) {
+ smc->srf.TSR = smt_get_time() ;
+ smt_send_srf(smc) ;
+ break ;
+ }
+ /* SR00e */
+ if (smc->srf.any_report && (u_long) tsr >=
+ smc->srf.SRThreshold) {
+ smc->srf.SRThreshold *= 2 ;
+ if (smc->srf.SRThreshold > THRESHOLD_32)
+ smc->srf.SRThreshold = THRESHOLD_32 ;
+ smc->srf.TSR = smt_get_time() ;
+ smt_send_srf(smc) ;
+ break ;
+ }
+ /* SR02 */
+ if (!smc->mib.fddiSMTStatRptPolicy) {
+ smc->srf.sr_state = SR2_DISABLED ;
+ break ;
+ }
+ break ;
+ case SR1_HOLDOFF :
+ /* SR10b */
+ if (tsr >= T_Limit) {
+ smc->srf.sr_state = SR0_WAIT ;
+ smc->srf.TSR = smt_get_time() ;
+ smt_send_srf(smc) ;
+ break ;
+ }
+ /* SR11a */
+ if (cond_asserted) {
+ smc->srf.SRThreshold = THRESHOLD_2 ;
+ }
+ /* SR11b */
+ /* SR11c */
+ /* handled above */
+ /* SR12 */
+ if (!smc->mib.fddiSMTStatRptPolicy) {
+ smc->srf.sr_state = SR2_DISABLED ;
+ break ;
+ }
+ break ;
+ case SR2_DISABLED :
+ if (smc->mib.fddiSMTStatRptPolicy) {
+ smc->srf.sr_state = SR0_WAIT ;
+ smc->srf.TSR = smt_get_time() ;
+ smc->srf.SRThreshold = THRESHOLD_2 ;
+ clear_all_rep(smc) ;
+ break ;
+ }
+ break ;
+ }
+}
+
+static void clear_all_rep(struct s_smc *smc)
+{
+ struct s_srf_evc *evc ;
+ unsigned int i ;
+
+ for (i = 0, evc = smc->evcs ; i < MAX_EVCS ; i++, evc++) {
+ evc->evc_rep_required = FALSE ;
+ if (SMT_IS_CONDITION(evc->evc_code))
+ *evc->evc_cond_state = FALSE ;
+ }
+ smc->srf.any_report = FALSE ;
+}
+
+static void clear_reported(struct s_smc *smc)
+{
+ struct s_srf_evc *evc ;
+ unsigned int i ;
+
+ smc->srf.any_report = FALSE ;
+ for (i = 0, evc = smc->evcs ; i < MAX_EVCS ; i++, evc++) {
+ if (SMT_IS_CONDITION(evc->evc_code)) {
+ if (*evc->evc_cond_state == FALSE)
+ evc->evc_rep_required = FALSE ;
+ else
+ smc->srf.any_report = TRUE ;
+ }
+ else {
+ evc->evc_rep_required = FALSE ;
+ *evc->evc_multiple = FALSE ;
+ }
+ }
+}
+
+/*
+ * build and send SMT SRF frame
+ */
+static void smt_send_srf(struct s_smc *smc)
+{
+
+ struct smt_header *smt ;
+ struct s_srf_evc *evc ;
+ SK_LOC_DECL(struct s_pcon,pcon) ;
+ SMbuf *mb ;
+ unsigned int i ;
+
+ static const struct fddi_addr SMT_SRF_DA = {
+ { 0x80, 0x01, 0x43, 0x00, 0x80, 0x08 }
+ } ;
+
+ /*
+ * build SMT header
+ */
+ if (!smc->r.sm_ma_avail)
+ return ;
+ if (!(mb = smt_build_frame(smc,SMT_SRF,SMT_ANNOUNCE,0)))
+ return ;
+
+ RS_SET(smc,RS_SOFTERROR) ;
+
+ smt = smtod(mb, struct smt_header *) ;
+ smt->smt_dest = SMT_SRF_DA ; /* DA == SRF multicast */
+
+ /*
+ * setup parameter status
+ */
+ pcon.pc_len = SMT_MAX_INFO_LEN ; /* max para length */
+ pcon.pc_err = 0 ; /* no error */
+ pcon.pc_badset = 0 ; /* no bad set count */
+ pcon.pc_p = (void *) (smt + 1) ; /* paras start here */
+
+ smt_add_para(smc,&pcon,(u_short) SMT_P1033,0,0) ;
+ smt_add_para(smc,&pcon,(u_short) SMT_P1034,0,0) ;
+
+ for (i = 0, evc = smc->evcs ; i < MAX_EVCS ; i++, evc++) {
+ if (evc->evc_rep_required) {
+ smt_add_para(smc,&pcon,evc->evc_para,
+ (int)evc->evc_index,0) ;
+ }
+ }
+ smt->smt_len = SMT_MAX_INFO_LEN - pcon.pc_len ;
+ mb->sm_len = smt->smt_len + sizeof(struct smt_header) ;
+
+ DB_SMT("SRF: sending SRF at %x, len %d\n",smt,mb->sm_len) ;
+ DB_SMT("SRF: state SR%d Threshold %d\n",
+ smc->srf.sr_state,smc->srf.SRThreshold/TICKS_PER_SECOND) ;
+#ifdef DEBUG
+ dump_smt(smc,smt,"SRF Send") ;
+#endif
+ smt_send_frame(smc,mb,FC_SMT_INFO,0) ;
+ clear_reported(smc) ;
+}
+
+#endif /* no BOOT */
+#endif /* no SLIM_SMT */
+