summaryrefslogtreecommitdiff
path: root/drivers/net/irda/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda/Kconfig')
-rw-r--r--drivers/net/irda/Kconfig405
1 files changed, 405 insertions, 0 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
new file mode 100644
index 000000000..a2c227bfb
--- /dev/null
+++ b/drivers/net/irda/Kconfig
@@ -0,0 +1,405 @@
+menu "Infrared-port device drivers"
+ depends on IRDA!=n
+
+comment "SIR device drivers"
+
+config IRTTY_SIR
+ tristate "IrTTY (uses Linux serial driver)"
+ depends on IRDA && TTY
+ help
+ Say Y here if you want to build support for the IrTTY line
+ discipline. To compile it as a module, choose M here: the module
+ will be called irtty-sir. IrTTY makes it possible to use Linux's
+ own serial driver for all IrDA ports that are 16550 compatible.
+ Most IrDA chips are 16550 compatible so you should probably say Y
+ to this option. Using IrTTY will however limit the speed of the
+ connection to 115200 bps (IrDA SIR mode).
+
+ If unsure, say Y.
+
+config BFIN_SIR
+ tristate "Blackfin SIR on UART"
+ depends on BLACKFIN && IRDA
+ default n
+ help
+ Say Y here if your want to enable SIR function on Blackfin UART
+ devices.
+
+ To activate this driver you can start irattach like:
+ "irattach irda0 -s"
+
+ Saying M, it will be built as a module named bfin_sir.
+
+ Note that you need to turn off one of the serial drivers for SIR
+ to use that UART.
+
+config BFIN_SIR0
+ bool "Blackfin SIR on UART0"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART0
+
+config BFIN_SIR1
+ bool "Blackfin SIR on UART1"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
+
+config BFIN_SIR2
+ bool "Blackfin SIR on UART2"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
+
+config BFIN_SIR3
+ bool "Blackfin SIR on UART3"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
+
+choice
+ prompt "SIR Mode"
+ depends on BFIN_SIR
+ default SIR_BFIN_DMA
+
+config SIR_BFIN_DMA
+ bool "DMA mode"
+ depends on !DMA_UNCACHED_NONE
+
+config SIR_BFIN_PIO
+ bool "PIO mode"
+endchoice
+
+config SH_SIR
+ tristate "SuperH SIR on UART"
+ depends on IRDA && SUPERH && \
+ (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
+ CPU_SUBTYPE_SH7724)
+ default n
+ help
+ Say Y here if your want to enable SIR function on SuperH UART
+ devices.
+
+comment "Dongle support"
+
+config DONGLE
+ bool "Serial dongle support"
+ depends on IRTTY_SIR
+ help
+ Say Y here if you have an infrared device that connects to your
+ computer's serial port. These devices are called dongles. Then say Y
+ or M to the driver for your particular dongle below.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about serial dongles.
+
+config ESI_DONGLE
+ tristate "ESI JetEye PC dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Extended Systems
+ JetEye PC dongle. To compile it as a module, choose M here. The ESI
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for ESI
+ dongles you will have to start irattach like this:
+ "irattach -d esi".
+
+config ACTISYS_DONGLE
+ tristate "ACTiSYS IR-220L and IR220L+ dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-220L and
+ IR220L+ dongles. To compile it as a module, choose M here. The
+ ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+ and can currently only be used by IrTTY. To activate support for
+ ACTiSYS dongles you will have to start irattach like this:
+ "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE
+ tristate "Tekram IrMate 210B dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Tekram IrMate 210B
+ dongle. To compile it as a module, choose M here. The Tekram dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Tekram
+ dongles you will have to start irattach like this:
+ "irattach -d tekram".
+
+config TOIM3232_DONGLE
+ tristate "TOIM3232 IrDa dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Vishay/Temic
+ TOIM3232 and TOIM4232 based dongles.
+ To compile it as a module, choose M here.
+
+config LITELINK_DONGLE
+ tristate "Parallax LiteLink dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Parallax Litelink
+ dongle. To compile it as a module, choose M here. The Parallax
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Parallax
+ dongles you will have to start irattach like this:
+ "irattach -d litelink".
+
+config MA600_DONGLE
+ tristate "Mobile Action MA600 dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Mobile Action MA600
+ dongle. To compile it as a module, choose M here. The MA600 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. The driver should also support
+ the MA620 USB version of the dongle, if the integrated USB-to-RS232
+ converter is supported by usbserial. To activate support for
+ MA600 dongle you will have to start irattach like this:
+ "irattach -d ma600".
+
+config GIRBIL_DONGLE
+ tristate "Greenwich GIrBIL dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Greenwich GIrBIL
+ dongle. If you want to compile it as a module, choose M here.
+ The Greenwich dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for Greenwich dongles you will have to start irattach
+ like this: "irattach -d girbil".
+
+config MCP2120_DONGLE
+ tristate "Microchip MCP2120"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Microchip MCP2120
+ dongle. If you want to compile it as a module, choose M here.
+ The MCP2120 dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for MCP2120 dongles you will have to start irattach
+ like this: "irattach -d mcp2120".
+
+ You must build this dongle yourself. For more information see:
+ <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE
+ tristate "Old Belkin dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Adaptec Airport 1000
+ and 2000 dongles. If you want to compile it as a module, choose
+ M here. Some information is contained in the comments
+ at the top of <file:drivers/net/irda/old_belkin-sir.c>.
+
+config ACT200L_DONGLE
+ tristate "ACTiSYS IR-200L dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-200L
+ dongle. If you want to compile it as a module, choose M here.
+ The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
+ port connector, and can currently only be used by IrTTY.
+ To activate support for ACTiSYS IR-200L dongle you will have to
+ start irattach like this: "irattach -d act200l".
+
+config KINGSUN_DONGLE
+ tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
+ depends on IRDA && USB
+ help
+ Say Y or M here if you want to build support for the KingSun/DonShine
+ DS-620 IrDA-USB bridge device driver.
+
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speed only (9600 bps).
+
+ To compile it as a module, choose M here: the module will be called
+ kingsun-sir.
+
+config KSDAZZLE_DONGLE
+ tristate "KingSun Dazzle IrDA-USB dongle"
+ depends on IRDA && USB
+ help
+ Say Y or M here if you want to build support for the KingSun Dazzle
+ IrDA-USB bridge device driver.
+
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speeds only (9600 through 115200 bps).
+
+ To compile it as a module, choose M here: the module will be called
+ ksdazzle-sir.
+
+config KS959_DONGLE
+ tristate "KingSun KS-959 IrDA-USB dongle"
+ depends on IRDA && USB
+ help
+ Say Y or M here if you want to build support for the KingSun KS-959
+ IrDA-USB bridge device driver.
+
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speeds only (9600 through 57600 bps).
+
+ To compile it as a module, choose M here: the module will be called
+ ks959-sir.
+
+comment "FIR device drivers"
+
+config USB_IRDA
+ tristate "IrDA USB dongles"
+ depends on IRDA && USB
+ select FW_LOADER
+ ---help---
+ Say Y here if you want to build support for the USB IrDA FIR Dongle
+ device driver. To compile it as a module, choose M here: the module
+ will be called irda-usb. IrDA-USB support the various IrDA USB
+ dongles available and most of their peculiarities. Those dongles
+ plug in the USB port of your computer, are plug and play, and
+ support SIR and FIR (4Mbps) speeds. On the other hand, those
+ dongles tend to be less efficient than a FIR chipset.
+
+ Please note that the driver is still experimental. And of course,
+ you will need both USB and IrDA support in your kernel...
+
+config SIGMATEL_FIR
+ tristate "SigmaTel STIr4200 bridge"
+ depends on IRDA && USB
+ select CRC32
+ ---help---
+ Say Y here if you want to build support for the SigmaTel STIr4200
+ USB IrDA FIR bridge device driver.
+
+ USB bridge based on the SigmaTel STIr4200 don't conform to the
+ IrDA-USB device class specification, and therefore need their
+ own specific driver. Those dongles support SIR and FIR (4Mbps)
+ speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ stir4200.
+
+config NSC_FIR
+ tristate "NSC PC87108/PC87338"
+ depends on IRDA && ISA_DMA_API
+ help
+ Say Y here if you want to build support for the NSC PC87108 and
+ PC87338 IrDA chipsets. This driver supports SIR,
+ MIR and FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ nsc-ircc.
+
+config WINBOND_FIR
+ tristate "Winbond W83977AF (IR)"
+ depends on IRDA && ISA_DMA_API
+ help
+ Say Y here if you want to build IrDA support for the Winbond
+ W83977AF super-io chipset. This driver should be used for the IrDA
+ chipset in the Corel NetWinder. The driver supports SIR, MIR and
+ FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ w83977af_ir.
+
+config TOSHIBA_FIR
+ tristate "Toshiba Type-O IR Port"
+ depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
+ help
+ Say Y here if you want to build support for the Toshiba Type-O IR
+ and Donau oboe chipsets. These chipsets are used by the Toshiba
+ Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
+ To compile it as a module, choose M here: the module will be called
+ donauboe.
+
+config AU1000_FIR
+ tristate "Alchemy IrDA SIR/FIR"
+ depends on IRDA && MIPS_ALCHEMY
+ help
+ Say Y/M here to build support the IrDA peripheral on the
+ Alchemy Au1000 and Au1100 SoCs.
+ Say M to build a module; it will be called au1k_ir.ko
+
+config SMC_IRCC_FIR
+ tristate "SMSC IrCC"
+ depends on IRDA && ISA_DMA_API
+ help
+ Say Y here if you want to build support for the SMC Infrared
+ Communications Controller. It is used in a wide variety of
+ laptops (Fujitsu, Sony, Compaq and some Toshiba).
+ To compile it as a module, choose M here: the module will be called
+ smsc-ircc2.o.
+
+config ALI_FIR
+ tristate "ALi M5123 FIR"
+ depends on IRDA && ISA_DMA_API
+ help
+ Say Y here if you want to build support for the ALi M5123 FIR
+ Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
+ M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
+ SIR, MIR and FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ ali-ircc.
+
+config VLSI_FIR
+ tristate "VLSI 82C147 SIR/MIR/FIR"
+ depends on IRDA && PCI
+ help
+ Say Y here if you want to build support for the VLSI 82C147
+ PCI-IrDA Controller. This controller is used by the HP OmniBook 800
+ and 5500 notebooks. The driver provides support for SIR, MIR and
+ FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ vlsi_ir.
+
+config SA1100_FIR
+ tristate "SA1100 Internal IR"
+ depends on ARCH_SA1100 && IRDA && DMA_SA11X0
+
+config VIA_FIR
+ tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
+ depends on IRDA && ISA_DMA_API
+ help
+ Say Y here if you want to build support for the VIA VT8231
+ and VIA VT1211 IrDA controllers, found on the motherboards using
+ those VIA chipsets. To use this controller, you will need
+ to plug a specific 5 pins FIR IrDA dongle in the specific
+ motherboard connector. The driver provides support for SIR, MIR
+ and FIR (4Mbps) speeds.
+
+ You will need to specify the 'dongle_id' module parameter to
+ indicate the FIR dongle attached to the controller.
+
+ To compile it as a module, choose M here: the module will be called
+ via-ircc.
+
+config PXA_FICP
+ tristate "Intel PXA2xx Internal FICP"
+ depends on ARCH_PXA && IRDA
+ help
+ Say Y or M here if you want to build support for the PXA2xx
+ built-in IRDA interface which can support both SIR and FIR.
+ This driver relies on platform specific helper routines so
+ available capabilities may vary from one PXA2xx target to
+ another.
+
+config MCS_FIR
+ tristate "MosChip MCS7780 IrDA-USB dongle"
+ depends on IRDA && USB
+ select CRC32
+ help
+ Say Y or M here if you want to build support for the MosChip
+ MCS7780 IrDA-USB bridge device driver.
+
+ USB bridge based on the MosChip MCS7780 don't conform to the
+ IrDA-USB device class specification, and therefore need their
+ own specific driver. Those dongles support SIR and FIR (4Mbps)
+ speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ mcs7780.
+
+config SH_IRDA
+ tristate "SuperH IrDA driver"
+ depends on IRDA
+ depends on (ARCH_SHMOBILE || COMPILE_TEST) && HAS_IOMEM
+ help
+ Say Y here if your want to enable SuperH IrDA devices.
+
+endmenu
+