summaryrefslogtreecommitdiff
path: root/drivers/net/phy/bcm7xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/bcm7xxx.c')
-rw-r--r--drivers/net/phy/bcm7xxx.c136
1 files changed, 31 insertions, 105 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 6b701b3de..03d4809a9 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -12,12 +12,12 @@
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/delay.h>
+#include "bcm-phy-lib.h"
#include <linux/bitops.h>
#include <linux/brcmphy.h>
#include <linux/mdio.h>
/* Broadcom BCM7xxx internal PHY registers */
-#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
/* 40nm only register definitions */
#define MII_BCM7XXX_100TX_AUX_CTL 0x10
@@ -25,7 +25,6 @@
#define MII_BCM7XXX_100TX_DISC 0x14
#define MII_BCM7XXX_AUX_MODE 0x1d
#define MII_BCM7XX_64CLK_MDIO BIT(12)
-#define MII_BCM7XXX_CORE_BASE1E 0x1e
#define MII_BCM7XXX_TEST 0x1f
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
@@ -46,39 +45,13 @@
#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
-#define CORE_EXPB0 0xb0
-
-static void phy_write_exp(struct phy_device *phydev,
- u16 reg, u16 value)
-{
- phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
- phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
-static void phy_write_misc(struct phy_device *phydev,
- u16 reg, u16 chl, u16 value)
-{
- int tmp;
-
- phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-
- tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
- tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
- phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
-
- tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
- phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
-
- phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
static void r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
- phy_write_exp(phydev, 0x00b0, 0x0010);
+ bcm_phy_write_exp(phydev, 0x00b0, 0x0010);
/* Disable Reset R_AL/RC_CAL Engine */
- phy_write_exp(phydev, 0x00b0, 0x0000);
+ bcm_phy_write_exp(phydev, 0x00b0, 0x0000);
}
static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
@@ -86,38 +59,38 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
*/
- phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
/* Change Ki to 011 */
- phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
* to 111
*/
- phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
/* Adjust bias current trim by -3 */
- phy_write_misc(phydev, DSP_TAP10, 0x690b);
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
/* Switch to CORE_BASE1E */
- phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
r_rc_cal_reset(phydev);
/* write AFE_RXCONFIG_0 */
- phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
/* write AFE_RXCONFIG_1 */
- phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
/* write AFE_RX_LP_COUNTER */
- phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+ bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
/* write AFE_HPF_TRIM_OTHERS */
- phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
/* write AFTE_TX_CONFIG */
- phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
return 0;
}
@@ -125,36 +98,36 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
{
/* AFE_RXCONFIG_0 */
- phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
/* AFE_RXCONFIG_1 */
- phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
/* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
- phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
/* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
- phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+ bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
- phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
- phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+ bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
/* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
- phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
+ bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
* offset for HT=0 code
*/
- phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
- phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
- phy_write_misc(phydev, DSP_TAP10, 0x011b);
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */
r_rc_cal_reset(phydev);
@@ -165,24 +138,24 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
{
/* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
- phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
- phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
- phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+ bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
* offset for HT=0 code
*/
- phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
- phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
- phy_write_misc(phydev, DSP_TAP10, 0x011b);
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */
r_rc_cal_reset(phydev);
@@ -190,53 +163,6 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
return 0;
}
-static int bcm7xxx_apd_enable(struct phy_device *phydev)
-{
- int val;
-
- /* Enable powering down of the DLL during auto-power down */
- val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
- if (val < 0)
- return val;
-
- val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
- bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
-
- /* Enable auto-power down */
- val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
- if (val < 0)
- return val;
-
- val |= BCM54XX_SHD_APD_EN;
- return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
-}
-
-static int bcm7xxx_eee_enable(struct phy_device *phydev)
-{
- int val;
-
- val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
- MDIO_MMD_AN, phydev->addr);
- if (val < 0)
- return val;
-
- /* Enable general EEE feature at the PHY level */
- val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
-
- phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
- MDIO_MMD_AN, phydev->addr, val);
-
- /* Advertise supported modes */
- val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr);
-
- val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
- phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr, val);
-
- return 0;
-}
-
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
@@ -273,11 +199,11 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
if (ret)
return ret;
- ret = bcm7xxx_eee_enable(phydev);
+ ret = bcm_phy_enable_eee(phydev);
if (ret)
return ret;
- return bcm7xxx_apd_enable(phydev);
+ return bcm_phy_enable_apd(phydev, true);
}
static int bcm7xxx_28nm_resume(struct phy_device *phydev)