diff options
Diffstat (limited to 'drivers/net/phy/icplus.c')
| -rw-r--r-- | drivers/net/phy/icplus.c | 21 |
1 files changed, 9 insertions, 12 deletions
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 0dbc445a5..e5f251b91 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -53,43 +53,43 @@ static int ip175c_config_init(struct phy_device *phydev) if (full_reset_performed == 0) { /* master reset */ - err = mdiobus_write(phydev->bus, 30, 0, 0x175c); + err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c); if (err < 0) return err; /* ensure no bus delays overlap reset period */ - err = mdiobus_read(phydev->bus, 30, 0); + err = mdiobus_read(phydev->mdio.bus, 30, 0); /* data sheet specifies reset period is 2 msec */ mdelay(2); /* enable IP175C mode */ - err = mdiobus_write(phydev->bus, 29, 31, 0x175c); + err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c); if (err < 0) return err; /* Set MII0 speed and duplex (in PHY mode) */ - err = mdiobus_write(phydev->bus, 29, 22, 0x420); + err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420); if (err < 0) return err; /* reset switch ports */ for (i = 0; i < 5; i++) { - err = mdiobus_write(phydev->bus, i, + err = mdiobus_write(phydev->mdio.bus, i, MII_BMCR, BMCR_RESET); if (err < 0) return err; } for (i = 0; i < 5; i++) - err = mdiobus_read(phydev->bus, i, MII_BMCR); + err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR); mdelay(2); full_reset_performed = 1; } - if (phydev->addr != 4) { + if (phydev->mdio.addr != 4) { phydev->state = PHY_RUNNING; phydev->speed = SPEED_100; phydev->duplex = DUPLEX_FULL; @@ -184,7 +184,7 @@ static int ip101a_g_config_init(struct phy_device *phydev) static int ip175c_read_status(struct phy_device *phydev) { - if (phydev->addr == 4) /* WAN port */ + if (phydev->mdio.addr == 4) /* WAN port */ genphy_read_status(phydev); else /* Don't need to read status for switch ports */ @@ -195,7 +195,7 @@ static int ip175c_read_status(struct phy_device *phydev) static int ip175c_config_aneg(struct phy_device *phydev) { - if (phydev->addr == 4) /* WAN port */ + if (phydev->mdio.addr == 4) /* WAN port */ genphy_config_aneg(phydev); return 0; @@ -221,7 +221,6 @@ static struct phy_driver icplus_driver[] = { .read_status = &ip175c_read_status, .suspend = genphy_suspend, .resume = genphy_resume, - .driver = { .owner = THIS_MODULE,}, }, { .phy_id = 0x02430d90, .name = "ICPlus IP1001", @@ -233,7 +232,6 @@ static struct phy_driver icplus_driver[] = { .read_status = &genphy_read_status, .suspend = genphy_suspend, .resume = genphy_resume, - .driver = { .owner = THIS_MODULE,}, }, { .phy_id = 0x02430c54, .name = "ICPlus IP101A/G", @@ -247,7 +245,6 @@ static struct phy_driver icplus_driver[] = { .read_status = &genphy_read_status, .suspend = genphy_suspend, .resume = genphy_resume, - .driver = { .owner = THIS_MODULE,}, } }; module_phy_driver(icplus_driver); |