summaryrefslogtreecommitdiff
path: root/drivers/net/phy/micrel.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/micrel.c')
-rw-r--r--drivers/net/phy/micrel.c806
1 files changed, 806 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 000000000..ebdc357c5
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,806 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010-2013 Micrel, Inc.
+ * Copyright (c) 2014 Johan Hovold <johan@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Support : Micrel Phys:
+ * Giga phys: ksz9021, ksz9031
+ * 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
+ * ksz8021, ksz8031, ksz8051,
+ * ksz8081, ksz8091,
+ * ksz8061,
+ * Switch : ksz8873, ksz886x
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+
+/* Operation Mode Strap Override */
+#define MII_KSZPHY_OMSO 0x16
+#define KSZPHY_OMSO_B_CAST_OFF BIT(9)
+#define KSZPHY_OMSO_NAND_TREE_ON BIT(5)
+#define KSZPHY_OMSO_RMII_OVERRIDE BIT(1)
+#define KSZPHY_OMSO_MII_OVERRIDE BIT(0)
+
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS 0x1B
+#define KSZPHY_INTCS_JABBER BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
+#define KSZPHY_INTCS_PARELLEL BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
+#define KSZPHY_INTCS_LINK_UP BIT(8)
+#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
+ KSZPHY_INTCS_LINK_DOWN)
+
+/* PHY Control 1 */
+#define MII_KSZPHY_CTRL_1 0x1e
+
+/* PHY Control 2 / PHY Control (if no PHY Control 1) */
+#define MII_KSZPHY_CTRL_2 0x1f
+#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
+/* bitmap of PHY register to set interrupt mode */
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
+#define KSZPHY_RMII_REF_CLK_SEL BIT(7)
+
+/* Write/read to/from extended registers */
+#define MII_KSZPHY_EXTREG 0x0b
+#define KSZPHY_EXTREG_WRITE 0x8000
+
+#define MII_KSZPHY_EXTREG_WRITE 0x0c
+#define MII_KSZPHY_EXTREG_READ 0x0d
+
+/* Extended registers */
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106
+
+#define PS_TO_REG 200
+
+struct kszphy_type {
+ u32 led_mode_reg;
+ u16 interrupt_level_mask;
+ bool has_broadcast_disable;
+ bool has_nand_tree_disable;
+ bool has_rmii_ref_clk_sel;
+};
+
+struct kszphy_priv {
+ const struct kszphy_type *type;
+ int led_mode;
+ bool rmii_ref_clk_sel;
+ bool rmii_ref_clk_sel_val;
+};
+
+static const struct kszphy_type ksz8021_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_broadcast_disable = true,
+ .has_nand_tree_disable = true,
+ .has_rmii_ref_clk_sel = true,
+};
+
+static const struct kszphy_type ksz8041_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_1,
+};
+
+static const struct kszphy_type ksz8051_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_nand_tree_disable = true,
+};
+
+static const struct kszphy_type ksz8081_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_broadcast_disable = true,
+ .has_nand_tree_disable = true,
+ .has_rmii_ref_clk_sel = true,
+};
+
+static const struct kszphy_type ks8737_type = {
+ .interrupt_level_mask = BIT(14),
+};
+
+static const struct kszphy_type ksz9021_type = {
+ .interrupt_level_mask = BIT(14),
+};
+
+static int kszphy_extended_write(struct phy_device *phydev,
+ u32 regnum, u16 val)
+{
+ phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
+ return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
+}
+
+static int kszphy_extended_read(struct phy_device *phydev,
+ u32 regnum)
+{
+ phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
+ return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
+}
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+ /* bit[7..0] int status, which is a read and clear register. */
+ int rc;
+
+ rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+ return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+ const struct kszphy_type *type = phydev->drv->driver_data;
+ int temp;
+ u16 mask;
+
+ if (type && type->interrupt_level_mask)
+ mask = type->interrupt_level_mask;
+ else
+ mask = KSZPHY_CTRL_INT_ACTIVE_HIGH;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ if (temp < 0)
+ return temp;
+ temp &= ~mask;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+
+ /* enable / disable interrupts */
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ temp = KSZPHY_INTCS_ALL;
+ else
+ temp = 0;
+
+ return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+}
+
+static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val)
+{
+ int ctrl;
+
+ ctrl = phy_read(phydev, MII_KSZPHY_CTRL);
+ if (ctrl < 0)
+ return ctrl;
+
+ if (val)
+ ctrl |= KSZPHY_RMII_REF_CLK_SEL;
+ else
+ ctrl &= ~KSZPHY_RMII_REF_CLK_SEL;
+
+ return phy_write(phydev, MII_KSZPHY_CTRL, ctrl);
+}
+
+static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
+{
+ int rc, temp, shift;
+
+ switch (reg) {
+ case MII_KSZPHY_CTRL_1:
+ shift = 14;
+ break;
+ case MII_KSZPHY_CTRL_2:
+ shift = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ temp = phy_read(phydev, reg);
+ if (temp < 0) {
+ rc = temp;
+ goto out;
+ }
+
+ temp &= ~(3 << shift);
+ temp |= val << shift;
+ rc = phy_write(phydev, reg, temp);
+out:
+ if (rc < 0)
+ dev_err(&phydev->dev, "failed to set led mode\n");
+
+ return rc;
+}
+
+/* Disable PHY address 0 as the broadcast address, so that it can be used as a
+ * unique (non-broadcast) address on a shared bus.
+ */
+static int kszphy_broadcast_disable(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_KSZPHY_OMSO);
+ if (ret < 0)
+ goto out;
+
+ ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
+out:
+ if (ret)
+ dev_err(&phydev->dev, "failed to disable broadcast address\n");
+
+ return ret;
+}
+
+static int kszphy_nand_tree_disable(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_KSZPHY_OMSO);
+ if (ret < 0)
+ goto out;
+
+ if (!(ret & KSZPHY_OMSO_NAND_TREE_ON))
+ return 0;
+
+ ret = phy_write(phydev, MII_KSZPHY_OMSO,
+ ret & ~KSZPHY_OMSO_NAND_TREE_ON);
+out:
+ if (ret)
+ dev_err(&phydev->dev, "failed to disable NAND tree mode\n");
+
+ return ret;
+}
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ const struct kszphy_type *type;
+ int ret;
+
+ if (!priv)
+ return 0;
+
+ type = priv->type;
+
+ if (type->has_broadcast_disable)
+ kszphy_broadcast_disable(phydev);
+
+ if (type->has_nand_tree_disable)
+ kszphy_nand_tree_disable(phydev);
+
+ if (priv->rmii_ref_clk_sel) {
+ ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
+ if (ret) {
+ dev_err(&phydev->dev, "failed to set rmii reference clock\n");
+ return ret;
+ }
+ }
+
+ if (priv->led_mode >= 0)
+ kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
+
+ return 0;
+}
+
+static int ksz9021_load_values_from_of(struct phy_device *phydev,
+ struct device_node *of_node, u16 reg,
+ char *field1, char *field2,
+ char *field3, char *field4)
+{
+ int val1 = -1;
+ int val2 = -2;
+ int val3 = -3;
+ int val4 = -4;
+ int newval;
+ int matches = 0;
+
+ if (!of_property_read_u32(of_node, field1, &val1))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field2, &val2))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field3, &val3))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field4, &val4))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < 4)
+ newval = kszphy_extended_read(phydev, reg);
+ else
+ newval = 0;
+
+ if (val1 != -1)
+ newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
+
+ if (val2 != -2)
+ newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
+
+ if (val3 != -3)
+ newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
+
+ if (val4 != -4)
+ newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
+
+ return kszphy_extended_write(phydev, reg, newval);
+}
+
+static int ksz9021_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_node) {
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
+ "txen-skew-ps", "txc-skew-ps",
+ "rxdv-skew-ps", "rxc-skew-ps");
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_RX_DATA_PAD_SKEW,
+ "rxd0-skew-ps", "rxd1-skew-ps",
+ "rxd2-skew-ps", "rxd3-skew-ps");
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_TX_DATA_PAD_SKEW,
+ "txd0-skew-ps", "txd1-skew-ps",
+ "txd2-skew-ps", "txd3-skew-ps");
+ }
+ return 0;
+}
+
+#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d
+#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e
+#define OP_DATA 1
+#define KSZ9031_PS_TO_REG 60
+
+/* Extended registers */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
+#define MII_KSZ9031RN_CLK_PAD_SKEW 8
+
+static int ksz9031_extended_write(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum, u16 val)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
+}
+
+static int ksz9031_extended_read(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
+}
+
+static int ksz9031_of_load_skew_values(struct phy_device *phydev,
+ struct device_node *of_node,
+ u16 reg, size_t field_sz,
+ char *field[], u8 numfields)
+{
+ int val[4] = {-1, -2, -3, -4};
+ int matches = 0;
+ u16 mask;
+ u16 maxval;
+ u16 newval;
+ int i;
+
+ for (i = 0; i < numfields; i++)
+ if (!of_property_read_u32(of_node, field[i], val + i))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < numfields)
+ newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+ else
+ newval = 0;
+
+ maxval = (field_sz == 4) ? 0xf : 0x1f;
+ for (i = 0; i < numfields; i++)
+ if (val[i] != -(i + 1)) {
+ mask = 0xffff;
+ mask ^= maxval << (field_sz * i);
+ newval = (newval & mask) |
+ (((val[i] / KSZ9031_PS_TO_REG) & maxval)
+ << (field_sz * i));
+ }
+
+ return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+ char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
+ char *rx_data_skews[4] = {
+ "rxd0-skew-ps", "rxd1-skew-ps",
+ "rxd2-skew-ps", "rxd3-skew-ps"
+ };
+ char *tx_data_skews[4] = {
+ "txd0-skew-ps", "txd1-skew-ps",
+ "txd2-skew-ps", "txd3-skew-ps"
+ };
+ char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_node) {
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+ clk_skews, 2);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+ control_skews, 2);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+ rx_data_skews, 4);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+ tx_data_skews, 4);
+ }
+ return 0;
+}
+
+#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
+#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
+static int ksz8873mll_read_status(struct phy_device *phydev)
+{
+ int regval;
+
+ /* dummy read */
+ regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+ regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+ if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX)
+ phydev->duplex = DUPLEX_HALF;
+ else
+ phydev->duplex = DUPLEX_FULL;
+
+ if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED)
+ phydev->speed = SPEED_10;
+ else
+ phydev->speed = SPEED_100;
+
+ phydev->link = 1;
+ phydev->pause = phydev->asym_pause = 0;
+
+ return 0;
+}
+
+static int ksz8873mll_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+/* This routine returns -1 as an indication to the caller that the
+ * Micrel ksz9021 10/100/1000 PHY does not support standard IEEE
+ * MMD extended PHY registers.
+ */
+static int
+ksz9021_rd_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
+ int regnum)
+{
+ return -1;
+}
+
+/* This routine does nothing since the Micrel ksz9021 does not support
+ * standard IEEE MMD extended PHY registers.
+ */
+static void
+ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
+ int regnum, u32 val)
+{
+}
+
+static int kszphy_probe(struct phy_device *phydev)
+{
+ const struct kszphy_type *type = phydev->drv->driver_data;
+ struct device_node *np = phydev->dev.of_node;
+ struct kszphy_priv *priv;
+ struct clk *clk;
+ int ret;
+
+ priv = devm_kzalloc(&phydev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ priv->type = type;
+
+ if (type->led_mode_reg) {
+ ret = of_property_read_u32(np, "micrel,led-mode",
+ &priv->led_mode);
+ if (ret)
+ priv->led_mode = -1;
+
+ if (priv->led_mode > 3) {
+ dev_err(&phydev->dev, "invalid led mode: 0x%02x\n",
+ priv->led_mode);
+ priv->led_mode = -1;
+ }
+ } else {
+ priv->led_mode = -1;
+ }
+
+ clk = devm_clk_get(&phydev->dev, "rmii-ref");
+ /* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
+ if (!IS_ERR_OR_NULL(clk)) {
+ unsigned long rate = clk_get_rate(clk);
+ bool rmii_ref_clk_sel_25_mhz;
+
+ priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
+ rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
+ "micrel,rmii-reference-clock-select-25-mhz");
+
+ if (rate > 24500000 && rate < 25500000) {
+ priv->rmii_ref_clk_sel_val = rmii_ref_clk_sel_25_mhz;
+ } else if (rate > 49500000 && rate < 50500000) {
+ priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
+ } else {
+ dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate);
+ return -EINVAL;
+ }
+ }
+
+ /* Support legacy board-file configuration */
+ if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+ priv->rmii_ref_clk_sel = true;
+ priv->rmii_ref_clk_sel_val = true;
+ }
+
+ return 0;
+}
+
+static struct phy_driver ksphy_driver[] = {
+{
+ .phy_id = PHY_ID_KS8737,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KS8737",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ks8737_type,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8021,
+ .phy_id_mask = 0x00ffffff,
+ .name = "Micrel KSZ8021 or KSZ8031",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8021_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8031,
+ .phy_id_mask = 0x00ffffff,
+ .name = "Micrel KSZ8031",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8021_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8041,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8041",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8041_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8041RNLI,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8041RNLI",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8041_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8051,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8051",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8051_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8001,
+ .name = "Micrel KSZ8001 or KS8721",
+ .phy_id_mask = 0x00ffffff,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8041_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8081,
+ .name = "Micrel KSZ8081 or KSZ8091",
+ .phy_id_mask = 0x00fffff0,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8081_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8061,
+ .name = "Micrel KSZ8061",
+ .phy_id_mask = 0x00fffff0,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ9021,
+ .phy_id_mask = 0x000ffffe,
+ .name = "Micrel KSZ9021 Gigabit PHY",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz9021_type,
+ .config_init = ksz9021_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_mmd_indirect = ksz9021_rd_mmd_phyreg,
+ .write_mmd_indirect = ksz9021_wr_mmd_phyreg,
+ .driver = { .owner = THIS_MODULE, },
+}, {
+ .phy_id = PHY_ID_KSZ9031,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ9031 Gigabit PHY",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz9021_type,
+ .config_init = ksz9031_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE, },
+}, {
+ .phy_id = PHY_ID_KSZ8873MLL,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8873MLL Switch",
+ .features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG,
+ .config_init = kszphy_config_init,
+ .config_aneg = ksz8873mll_config_aneg,
+ .read_status = ksz8873mll_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE, },
+}, {
+ .phy_id = PHY_ID_KSZ886X,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ886X Switch",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE, },
+} };
+
+module_phy_driver(ksphy_driver);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused micrel_tbl[] = {
+ { PHY_ID_KSZ9021, 0x000ffffe },
+ { PHY_ID_KSZ9031, 0x00fffff0 },
+ { PHY_ID_KSZ8001, 0x00ffffff },
+ { PHY_ID_KS8737, 0x00fffff0 },
+ { PHY_ID_KSZ8021, 0x00ffffff },
+ { PHY_ID_KSZ8031, 0x00ffffff },
+ { PHY_ID_KSZ8041, 0x00fffff0 },
+ { PHY_ID_KSZ8051, 0x00fffff0 },
+ { PHY_ID_KSZ8061, 0x00fffff0 },
+ { PHY_ID_KSZ8081, 0x00fffff0 },
+ { PHY_ID_KSZ8873MLL, 0x00fffff0 },
+ { PHY_ID_KSZ886X, 0x00fffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);