summaryrefslogtreecommitdiff
path: root/drivers/net/usb/qmi_wwan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/usb/qmi_wwan.c')
-rw-r--r--drivers/net/usb/qmi_wwan.c159
1 files changed, 153 insertions, 6 deletions
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 982e0acd1..a3a4ccf7c 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -14,7 +14,9 @@
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
#include <linux/mii.h>
+#include <linux/rtnetlink.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
@@ -48,11 +50,100 @@
struct qmi_wwan_state {
struct usb_driver *subdriver;
atomic_t pmcount;
- unsigned long unused;
+ unsigned long flags;
struct usb_interface *control;
struct usb_interface *data;
};
+enum qmi_wwan_flags {
+ QMI_WWAN_FLAG_RAWIP = 1 << 0,
+};
+
+static void qmi_wwan_netdev_setup(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct qmi_wwan_state *info = (void *)&dev->data;
+
+ if (info->flags & QMI_WWAN_FLAG_RAWIP) {
+ net->header_ops = NULL; /* No header */
+ net->type = ARPHRD_NONE;
+ net->hard_header_len = 0;
+ net->addr_len = 0;
+ net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
+ netdev_dbg(net, "mode: raw IP\n");
+ } else if (!net->header_ops) { /* don't bother if already set */
+ ether_setup(net);
+ netdev_dbg(net, "mode: Ethernet\n");
+ }
+
+ /* recalculate buffers after changing hard_header_len */
+ usbnet_change_mtu(net, net->mtu);
+}
+
+static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf)
+{
+ struct usbnet *dev = netdev_priv(to_net_dev(d));
+ struct qmi_wwan_state *info = (void *)&dev->data;
+
+ return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N');
+}
+
+static ssize_t raw_ip_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
+{
+ struct usbnet *dev = netdev_priv(to_net_dev(d));
+ struct qmi_wwan_state *info = (void *)&dev->data;
+ bool enable;
+ int ret;
+
+ if (strtobool(buf, &enable))
+ return -EINVAL;
+
+ /* no change? */
+ if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
+ return len;
+
+ if (!rtnl_trylock())
+ return restart_syscall();
+
+ /* we don't want to modify a running netdev */
+ if (netif_running(dev->net)) {
+ netdev_err(dev->net, "Cannot change a running device\n");
+ ret = -EBUSY;
+ goto err;
+ }
+
+ /* let other drivers deny the change */
+ ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net);
+ ret = notifier_to_errno(ret);
+ if (ret) {
+ netdev_err(dev->net, "Type change was refused\n");
+ goto err;
+ }
+
+ if (enable)
+ info->flags |= QMI_WWAN_FLAG_RAWIP;
+ else
+ info->flags &= ~QMI_WWAN_FLAG_RAWIP;
+ qmi_wwan_netdev_setup(dev->net);
+ call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net);
+ ret = len;
+err:
+ rtnl_unlock();
+ return ret;
+}
+
+static DEVICE_ATTR_RW(raw_ip);
+
+static struct attribute *qmi_wwan_sysfs_attrs[] = {
+ &dev_attr_raw_ip.attr,
+ NULL,
+};
+
+static struct attribute_group qmi_wwan_sysfs_attr_group = {
+ .name = "qmi",
+ .attrs = qmi_wwan_sysfs_attrs,
+};
+
/* default ethernet address used by the modem */
static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
@@ -80,6 +171,8 @@ static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
*/
static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
+ struct qmi_wwan_state *info = (void *)&dev->data;
+ bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP;
__be16 proto;
/* This check is no longer done by usbnet */
@@ -94,15 +187,25 @@ static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
proto = htons(ETH_P_IPV6);
break;
case 0x00:
+ if (rawip)
+ return 0;
if (is_multicast_ether_addr(skb->data))
return 1;
/* possibly bogus destination - rewrite just in case */
skb_reset_mac_header(skb);
goto fix_dest;
default:
+ if (rawip)
+ return 0;
/* pass along other packets without modifications */
return 1;
}
+ if (rawip) {
+ skb->dev = dev->net; /* normally set by eth_type_trans */
+ skb->protocol = proto;
+ return 1;
+ }
+
if (skb_headroom(skb) < ETH_HLEN)
return 0;
skb_push(skb, ETH_HLEN);
@@ -223,6 +326,20 @@ err:
return rv;
}
+/* Send CDC SetControlLineState request, setting or clearing the DTR.
+ * "Required for Autoconnect and 9x30 to wake up" according to the
+ * GobiNet driver. The requirement has been verified on an MDM9230
+ * based Sierra Wireless MC7455
+ */
+static int qmi_wwan_change_dtr(struct usbnet *dev, bool on)
+{
+ u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber;
+
+ return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ on ? 0x01 : 0x00, intf, NULL, 0);
+}
+
static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
{
int status = -1;
@@ -257,7 +374,10 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
"bogus CDC Union: master=%u, slave=%u\n",
cdc_union->bMasterInterface0,
cdc_union->bSlaveInterface0);
- goto err;
+
+ /* ignore and continue... */
+ cdc_union = NULL;
+ info->data = intf;
}
}
@@ -280,6 +400,24 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
usb_driver_release_interface(driver, info->data);
}
+ /* disabling remote wakeup on MDM9x30 devices has the same
+ * effect as clearing DTR. The device will not respond to QMI
+ * requests until we set DTR again. This is similar to a
+ * QMI_CTL SYNC request, clearing a lot of firmware state
+ * including the client ID allocations.
+ *
+ * Our usage model allows a session to span multiple
+ * open/close events, so we must prevent the firmware from
+ * clearing out state the clients might need.
+ *
+ * MDM9x30 is the first QMI chipset with USB3 support. Abuse
+ * this fact to enable the quirk.
+ */
+ if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
+ qmi_wwan_manage_power(dev, 1);
+ qmi_wwan_change_dtr(dev, true);
+ }
+
/* Never use the same address on both ends of the link, even if the
* buggy firmware told us to. Or, if device is assigned the well-known
* buggy firmware MAC address, replace it with a random address,
@@ -294,6 +432,7 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->dev_addr[0] &= 0xbf; /* clear "IP" bit */
}
dev->net->netdev_ops = &qmi_wwan_netdev_ops;
+ dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
err:
return status;
}
@@ -307,6 +446,12 @@ static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
if (info->subdriver && info->subdriver->disconnect)
info->subdriver->disconnect(info->control);
+ /* disable MDM9x30 quirk */
+ if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
+ qmi_wwan_change_dtr(dev, false);
+ qmi_wwan_manage_power(dev, 0);
+ }
+
/* allow user to unbind using either control or data */
if (intf == info->control)
other = info->data;
@@ -716,10 +861,10 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x1199, 0x9056, 8)}, /* Sierra Wireless Modem */
{QMI_FIXED_INTF(0x1199, 0x9057, 8)},
{QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */
- {QMI_FIXED_INTF(0x1199, 0x9070, 8)}, /* Sierra Wireless MC74xx/EM74xx */
- {QMI_FIXED_INTF(0x1199, 0x9070, 10)}, /* Sierra Wireless MC74xx/EM74xx */
- {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx/EM74xx */
- {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx/EM74xx */
+ {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */
+ {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx */
+ {QMI_FIXED_INTF(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */
+ {QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
@@ -742,8 +887,10 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81b1, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
+ {QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
{QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */
+ {QMI_FIXED_INTF(0x1e0e, 0x9001, 5)}, /* SIMCom 7230E */
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */