diff options
Diffstat (limited to 'drivers/net/wireless/hostap/Kconfig')
| -rw-r--r-- | drivers/net/wireless/hostap/Kconfig | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig new file mode 100644 index 000000000..287d82728 --- /dev/null +++ b/drivers/net/wireless/hostap/Kconfig @@ -0,0 +1,98 @@ +config HOSTAP + tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select CRYPTO + select CRYPTO_ARC4 + select CRYPTO_ECB + select CRYPTO_AES + select CRYPTO_MICHAEL_MIC + select CRYPTO_ECB + select CRC32 + select LIB80211 + select LIB80211_CRYPT_WEP + select LIB80211_CRYPT_TKIP + select LIB80211_CRYPT_CCMP + ---help--- + Shared driver code for IEEE 802.11b wireless cards based on + Intersil Prism2/2.5/3 chipset. This driver supports so called + Host AP mode that allows the card to act as an IEEE 802.11 + access point. + + See <http://hostap.epitest.fi/> for more information about the + Host AP driver configuration and tools. This site includes + information and tools (hostapd and wpa_supplicant) for WPA/WPA2 + support. + + This option includes the base Host AP driver code that is shared by + different hardware models. You will also need to enable support for + PLX/PCI/CS version of the driver to actually use the driver. + + The driver can be compiled as a module and it will be called + hostap. + +config HOSTAP_FIRMWARE + bool "Support downloading firmware images with Host AP driver" + depends on HOSTAP + ---help--- + Configure Host AP driver to include support for firmware image + download. This option by itself only enables downloading to the + volatile memory, i.e. the card RAM. This option is required to + support cards that don't have firmware in flash, such as D-Link + DWL-520 rev E and D-Link DWL-650 rev P. + + Firmware image downloading needs a user space tool, prism2_srec. + It is available from http://hostap.epitest.fi/. + +config HOSTAP_FIRMWARE_NVRAM + bool "Support for non-volatile firmware download" + depends on HOSTAP_FIRMWARE + ---help--- + Allow Host AP driver to write firmware images to the non-volatile + card memory, i.e. flash memory that survives power cycling. + Enable this option if you want to be able to change card firmware + permanently. + + Firmware image downloading needs a user space tool, prism2_srec. + It is available from http://hostap.epitest.fi/. + +config HOSTAP_PLX + tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" + depends on PCI && HOSTAP + ---help--- + Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based + PCI adaptors. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + hostap_plx. + +config HOSTAP_PCI + tristate "Host AP driver for Prism2.5 PCI adaptors" + depends on PCI && HOSTAP + ---help--- + Host AP driver's version for Prism2.5 PCI adaptors. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + hostap_pci. + +config HOSTAP_CS + tristate "Host AP driver for Prism2/2.5/3 PC Cards" + depends on PCMCIA && HOSTAP + ---help--- + Host AP driver's version for Prism2/2.5/3 PC Cards. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + hostap_cs. |